tender for ct/pt urinal and maintenance work under zone no. 3 - 3d paint green net all kinds of soil hot finished welded type tubes cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate supply s installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by 1:4 (1 cement: 4 sand) fixing glazed/ ceramic/ vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water ba providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy area of slab upto0.50 sqm granite work. removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair cement primer providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare th two or more coats on new work newwork (twoormorecoat [email protected] ltr/10sqmover and including priming coat of exterior primer applied @2.20 kg/ 10 sqm). cement concrete grade m-10 (nominal mix) with 40 mm maximum size of stone aggregate cement mortar 1:4 (1 cement : 4 coarse sand) 160 mm dia. providing and fixing 40mm thick red stone slab over drains including pointing in cement mortar 1:3 (1 cement : 3 sand) structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. wit 0.80mm thick with zinc coating not less than 275gm/m� painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @0.90 ltr/10 sqm over an under painting wood work with deluxe multi surface paint of required shade. two or more coat applied @0.90 ltr/10 sqm 2mm thick flat. removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing cement mortar 1:3 (1 cement : 3 coarse sand) 110mm diameter 110mm dia 32x25mm 32 mm nominal outer dia .pipes. providingand fixingchlorinatedpolyvinyl chloride(cpvc)pipes, 20 mm nominal outer dia.pipes. powder coated aluminium (minimum thickness of powder coating 50 micron) with float glass panes of 8 mm thickness providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting a providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, screws etc. to suit shutter t second class teak wood 18 mm thick extra for providing and fixing flush doors with decorative veneering instead of non decorative isi marked flush door shu providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc. including welding providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with 25 mm dia (18 gauge) in gratings, frames, guard bar, ladder, railings, brackets, gates and similar dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials a crusher stone dust providing and laying 60 mm thick factory made cement concrete interlocking paver block of m -30 grade made by block mak kota stone 25mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with for thickness of tiles upto 25 mm 25 mm nominal outer dia.pipes.