tender for 1:3:6 or richer mix , in cement mortar , for thickness of tiles above 25 mm and up to 40 mm , removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing , all kinds of soil , cement concrete grade m-10 (nominal mix) with 20 mm maximum size of stone aggregate , foundations, footings, bases of columns, etc. for mass concrete. , hot rolled deformed bars , cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate. , 1:6 (1 cement: 6 sand) , 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 , cement mortar 1:6 (1 cement : 6 coarse sand , hot finished welded type tubes. , hot finished seamless type tubes. , providing and laying rectified glazed ceramic wall tiles 300x450 mm or more (8mm to 10mm thick) of 1st quality conformi , providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy , providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare th , second class teak wood , painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @0.90 ltr/ , two or more coats on new work. , lettering with black japan paint of approved brand and manufacture , providing and laying 80mm thick factory made cement concrete interlocking paver block of m -40 grade m , cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate , providing and laying cement concrete grade m-10 nominal mix 1:3:6 with 40 mm graded crushed stone aggregate, spreading , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing , excavated earth ,for 3km , light shade using white cement. , providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less ,