View Bid Results For Rubber Process Oil Tenders

We found 682 Bid Results related to rubber process oil tenders. You can find Contractor details who won rubber process oil tenders along with contract details in Bid awards announcements section.

Filters
Stage
457
158
67
Tender Publishing Platform
23
659
State / UT
33
130
106
51
47
43
37
33
30
27
20
19
18
15
14
13
10
10
9
6
6
6
6
6
3
3
3
2
2
2
2
1
1
1
Contract Value
238
31
291
122
Publish Date
2
0
0
0
0
Sector
25
261
134
49
41
40
35
29
18
18
8
8
6
6
5
4
3
3
3
3
2
2
1
1
1
1
Ownership
5
280
274
65
51
12
Within keyword
Active filters:
Showing 1–14 of 682 tenders matching your filters
1.
Housing Urban and Rular Development #11415087 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
2.
Housing Urban and Rular Development #11306856 AOC
Tender For M.O.W. Work (Additional Room) In Bunglow No. Eg-9/3 And Ek-9/3 Under Section No.1 Survey Sub Dn. Bhopal- 1 M.O.W. Work (Additional Room) in Bunglow No. EG-9/3 and EK-9/3 Under Section No.1 Survey Sub Dn. Bhopal 1st Call P.A.C. 29.64 Lakh,as per Building SOR wef 01-01-2024 Schedule Attached Complition period 90 Days Please Enable Macros to View BoQ information SCHEDULE OF ITEMS Name of work : M.O.W. Work (Additional Room) in Bunglow No. EG-9/3 and EK-9/3 Under Section No.1 Survey Sub Dn. Bhopal Probable Amount of contract : Rs. 29.64 Lacs. (Rs. in Figures) : Time Alloved : 6 months i/c rainy season S.No SOR Item Particulers of Item Unit Rate Remarks 2 2.4 2.4.1 beyond 30 cm girth up to and including 60 cm girth each 350.0 2.4.2 beyond 60 cm girth up to and including 120 cm girth each 1150.0 2.4.3 beyond 120 cm girth up to and including 240 cm girth each 3500.0 2.4.4 above 240 cm girth each 6300.0 3 2.7 2.7.1 Ordinary rock cum 287.0 2.7.2 Hard rock (requiring blasting) cum 519.0 2.7.3 Hard rock (blasting prohibited) cum 828.0 4 2.25 2.25.1 All kinds of soil. cum 30.0 2.25.2 Ordinary or hard rock. cum 53.0 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete cum 672.0 Note: - Maximum thickness of this layer shall be 20 cm. 5 2.27 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) cum 393.0 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm cum 331.0 6 2.28 2.28.1 All kinds of soil. each 42.0 2.28.2 Ordinary rock each 68.0 2.28.3 Hard rock (requiring blasting) each 138.0 2.28.4 Hard rock (blasting prohibited) each 151.0 7 2.3 2.30.1 Along external wall where the apron is not provided using chemical emulsion@ 7.5 liters / sqm of the vertical surfaceof the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 36.0 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 42.0 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. sqm 199.0 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 50.0 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litresper hole by drilling 6 mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same. metre 201.0 8 2.41 2.42.1 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. cum 331.0 9 4.1 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete cum 6338.0 4.1.1.2 M-20 – Grade concrete cum 4933.0 4.1.1.3 M-15 – Grade concrete cum 4471.0 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) cum 3890.0 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete cum 4403.0 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) cum 3808.0 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate cum 3474.0 4.1.3 With fly ash. Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 10 4.2 string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete Cum 6582.0 4.2.1.2 M 20 – Grade concrete Cum 5177.0 4.2.1.3 M 15 – Grade concrete Cum 4714.0 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Cum 4134.0 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete cum 4647.0 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum 4052.0 11 4.3 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. Sqm 169.0 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. sqm 267.0 4.3.3 Above plinth: Columns, pillars, posts and struts. Sqm 356.0 12 4.6 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) cum 5558.0 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum 4515.0 4.1 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Sqm 200.0 13 5.1 5.1.1 M-20 Grade Concrete cum 6153.0 5.1.2 M-15 Grade Concrete cum 5397.0 14 5.2 5.2.1 M-20 Grade Concrete cum 6231.0 15 5.3 5.3.1 M-20 Grade Concrete cum 6541.0 16 5.4 5.4.1 M-20 Grade Concrete cum 5542.0 17 5.5 5.5.1 M-20 Grade Concrete cum 6906.0 18 5.6.1 5.6.1 M-20 Grade Concrete cum 6337.0 19 5.7.1 5.7.1 M-20 Grade Concrete cum 5448.0 20 5.9.1 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level sqm 190.6 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. sqm 219.0 5.9.2.2 Above plinth upto 3.6 m height from plinth level sqm 330.0 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. sqm 40.0 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 439.6 5.9.4 Shelves(Cast in situ) sqm 290.0 5.9.5 Lintels, beams, girders, bressumers and cantilevers sqm 356.0 5.9.6 Columns, P i l l a r s , Piers, Abutments, sqm 471.2 Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. sqm 435.7 5.9.8 Spiral staircases (including landing). sqm 450.0 5.9.9 Arches, domes,vaults upto 6m span sqm 1141.6 5.9.10 Extra for arches, domes, vaults exceeding 6 m span sqm 451.3 5.9.11 Chimneys and shafts sqm 294.0 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. sqm 1481.0 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). sqm 0.2 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. sqm 191.0 5.9.17 Cornices and mouldings sqm 565.0 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. sqm 529.6 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. sqm 534.2 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of C.E./S.E. in case of B & R works . sqm 575.35 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of C.E./S.E. in case of B & R works . sqm 521.2 21 5.1 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 212.0 22 5.12 5.12.1 50 mm thick sqm 790.0 5.12.2 40 mm thick sqm 689.0 5.12.3 25 mm thick sqm 598.0 23 5.16 5.16.1 Mild steel and Medium Tensile steel bars. kg 78 .00 5.16.2 Hard drawn steel wire kg 75.0 5.16.3 Cold twisted bars (CTD) kg 81.0 5.16.4 Hot rolled deformed bars kg 81.0 5.16.5 Hard drawn steel wire fabric kg 76.0 5.16.6 Thermo-Mechanically Treated bars.FE 500 D or more conforming to IS 1786 kg 80.0 5.16.7 Thermo-Mechanically Treated bars. FE 500 conforming .to IS 1786 kg 77.0 5.16.8 Corrosion resistance Steel bar Grade Fe-500 D & above , use with prior permission of C.E. Kg 98.0 24 5.22 5. 22.1 12 mm thick sqm 402.0 5. 22.2 25 mm thick sqm 574.0 5. 22.3 50 mm thick sqm 674.0 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. RM 102.0 5. 23.1.2 200mm wide. RM 137.0 5. 23.1.3 250mm wide. RM 153.0 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. RM 483.0 5. 23.2.2 200 mm wide. RM 646.0 5. 23.2.3 250 mm wide. RM 725.0 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. RM 367.0 5. 23.3.2 200 mm wide. RM 443.0 5. 23.3.3 250 mm wide. RM 555.0 25 5.24 5.24.1 Preparation of grooves RM 18.5 5.24.2 Preparation of Drip course RM 30.0 26 5.32 5.32.1 Non pigmented wet curing compound sqm 93.0 5.32.2 Pigmented wet curing compound. sqm 100.0 27 6.1 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5818.0 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5626.0 28 6.2 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 6012.0 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5821.0 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not lessthan 40kg /cm2 and water absorptionnot more than 15% in foundation and plinth i/c curing etc. complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5252.0 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5061.0 29 6.4 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5446.0 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5255.0 30 6.5 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4347.0 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). cum 4155.0 31 6.6 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4541.0 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) cum 4350.0 32 6.7 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5384.0 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5162.0 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5271.0 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5049.0 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5158.0 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4936.0 33 6.8 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5287.0 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5095.0 34 6.9 Cement Mortar 1:4 ( 1 cement : 4 sand) 35 6.12 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 697.0 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 673.0 36 6.13 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 639.0 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 615.0 37 6.14 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 546.0 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 522.0 38 6.15 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 570.0 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 551.0 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 524.0 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 505.0 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 479.0 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 459.0 39 6.37 6.37.1 Having100 kg / cm2 average compressive strength. 6.37.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5115.0 6.37.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4904.0 6.37.2 Having75 kg / cm2 average compressive strength. 6.37.2.1 Cement mortar 1:4 (1 cement : 4sand) cum 5007.0 6.37.2.2 Cement mortar 1:6 (1 cement : 6sand) cum 4797.0 6.37.3 Having50 kg / cm2 averagecompressive strength. 6.37.3.1 Cement mortar 1:4 (1 cement : 4sand) cum 4900.0 6.37.3.2 Cement mortar 1:6 (1 cement : 6sand) cum 4689.0 40 9.3 9.3.1 Sal wood cum 76229.0 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. cum 77538.0 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 64833.0 41 9.4 9.4.1 Second class teak wood cum 9062.0 9.4.2 Sal wood cum 7131.0 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. cum 7275.0 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 6030.0 9.5.4.1 35 mm thick sqm 1089.0 9.5.4.2 30 mm thick sqm 969.0 42 9.6 9.6.1 Second class teak wood sqm 2215.0 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood sqm 1763.0 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. sqm 971.0 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. sqm 1439.0 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type sqm 1369.0 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. sqm 1861.0 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type sqm 1650.0 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. sqm 791.0 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. sqm 1087.0 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. sqm 1333.0 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. sqm 1390.0 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick sqm 1298.0 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) sqm 973.0 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) sqm 1046.0 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading sqm 1532.0 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum sqm 580.0 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum sqm 754.0 43 9.14 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. Sqm 170.0 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Sqm 53.0 44 9.15 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. Sqm 2736.0 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 2753.0 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. Sqm 2815.0 9.15.2.2 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 2759.0 45 9.16 9.16.1 12 mm thick Sqm 555.0 9.16.2 18 mm thick Sqm 654.0 46 9.17 9.17.1 18 mm thick Sqm 1270.0 9.17.2 25 mm thick Sqm 1383.0 47 9.18 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 2823.0 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 2648.0 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Sqm 2465.0 48 9.19 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 1870.0 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 1696.0 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 1623.0 49 9.2 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 401.0 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. Sqm 157.0 9.22.2 Circular. Sqm 244.0 50 9.25 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. Sqm 3174.0 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2599.0 9.25.1.3 Kiln seasoned selected class of sheesham wood. Sqm 2452.0 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. Sqm 3291.0 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2716.0 9.25.2.3 Kiln seasoned selected class of sheesham wood. Sqm 2569.0 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. Sqm 2797.0 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2306.0 9.25.3.3 Kiln seasoned selected class of sheesham wood. Sqm 2179.0 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. Sqm 2914.0 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2423.0 9.25.4.3 Kiln seasoned selected class of sheesham wood. Sqm 2296.0 9.26.2 30 mm thick shutters Sqm 2102.0 51 9.57 9.57.1 300x16 mm Each 170.0 9.57.2 250x16 mm Each 157.0 52 9.58 9.58.1 250x10 mm Each 68.0 9.58.2 200x10 mm Each 60.0 9.58.3 150x10 mm Each 42.0 9.58.4 100x10 mm Each 35.0 53 9.6 9.60.1 300x20x6 mm Each 72.0 9.60.2 250x20x6 mm Each 67.0 54 9.61 9.61.1 125 mm Each 27.0 9.61.2 100 mm Each 25.0 9.61.3 75 mm Each 24.0 55 9.62 9.62.1 150 mm Each 23.0 9.62.2 115 mm Each 20.0 9.62.3 90 mm Each 17.0 56 9.63 9.63.1 300 mm weighing not less than 200 gms. Each 40.0 9.63.2 250 mm weighing not less than 150 gms. Each 34.0 9.63.3 200 mm weighing not less than 120 gms. Each 28.0 57 9.65 9.65.1 300x16 mm Each 389.0 9.65.2 250x16 mm Each 326.0 9.65.3 400x16mm Each 601.0 58 9.66 9.66.1 250x10 mm Each 148.0 9.66.2 200x10 mm Each 93.0 9.66.3 150x10 mm Each 71.0 9.66.4 100x10 mm Each 50.0 59 9.68 9.68.1 300x20x6 mm Each 211.0 9.68.2 250x20x6 mm Each 173.0 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : Each 9.69.1 125 mm Each 60.0 9.69.2 100 mm Each 54.0 9.69.3 75 mm Each 48.0 60 9.7 9.70.1 150 mm each 37.0 9.70.2 115 mm each 33.0 9.70.3 90 mm each 26.0 61 9.73 9.73.1 125x64x1.90 mm each 67.0 9.73.2 100X58X1.90 mm each 59.0 9.73.3 75x47x1.80 mm each 39.0 9.73.4 50x37x1.50 mm each 25.0 62 9.74 9.74.1 125x64x2.50 mm each 76.0 9.74.2 100x60x2.50 mm each 60.0 9.74.3 75x50x2.50 mm each 46.0 63 9.76 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) each 456.0 9.77.2 125x70x4 mm (ordinary type) each 148.0 9.77.3 100x85x5.5 mm (heavy type) each 387.0 9.77.4 100x70x4 mm (ordinary type) each 117.0 9.77.5 75x65x4 mm (heavy type) each 145.0 9.77.6 75x40x2.5 mm (ordinary type) each 74.0 9.77.7 50x40x2.5 mm (ordinary type) each 32.0 64 9.78 9.78.1 150x125x27x5 mm each 385.0 9.78.2 125x125x27x5 mm each 345.0 9.78.3 100x125x27x5 mm each 304.0 9.78.4 75x100x20x3.2 mm each 239.0 65 9.79 9.79.1 400x10 mm each 400.0 9.79.2 250x10 mm each 329.0 9.79.3 200x10 mm each 261.0 9.79.4 150x10 mm each 221.0 9.79.5 100x10 mm each 142.0 66 9.8 9.80.1 300x16x5 mm each 237.0 9.80.2 250x16x5 mm each 225.0 67 9.81 9.81.1 125 mm each 205.0 9.81.2 100 mm each 181.0 9.81.3 75 mm each 141.0 68 9.82 9.82.1 300x16mm each 407.0 9.82.2 250x16mm each 374.0 69 9.87 9.87.1 40 mm each 144.0 9.87.2 50 mm each 150.0 9.87.3 65 mm each 162.0 9.87.4 75 mm each 185.0 70 9.99 9.99.1 Size 40 mm each 144.0 9.99.2 Size 50 mm each 156.0 9.99.3 Size 65 mm each 167.0 9.99.4 Size 75 mm each 196.0 71 9.101 9.101.1 300x16mm each 268.0 9.101.2 250x16mm each 245.0 72 9.102 9.102.1 400X10mm each 260.0 9.102.2 300x10mm each 198.0 9.102.3 250x10mm each 164.0 9.102.4 200x10 mm each 113.0 9.102.5 150x10 mm each 91.0 9.102.6 100x10 mm each 73.0 73 9.103 9.103.1 300x16x5mm each 255.0 9.103.2 250x16x5mm each 243.0 74 9.108 9.108.1 125x75x4 mm each 115.0 9.108.2 125x63x4 mm each 108.0 9.108.3 100x75x4 mm each 95.0 9.108.4 100x63x4 mm each 93.0 9.108.5 100x63x3.2 mm each 90.0 9.108.6 75x63x4 mm each 77.0 9.108.7 75x63x3.2 mm each 75.0 9.108.8 75x45x3.2 mm each 67.0 75 9.109 9.109.1 300x16 mm each 241.0 9.109.2 250x16 mm each 195.0 76 9.11 9.110.1 400X10mm each 123.0 9.110.2 300x10 mm each 114.0 9.110.3 250x10 mm each 102.0 9.110.4 200x10 mm each 82.0 9.110.5 150x10 mm each 69.0 9.110.6 100x10 mm each 55.0 77 9.111 78 9.113 9.113.1 125 mm each 75.0 9.113.2 100 mm each 55.0 9.113.3 75 mm each 46.0 79 9.114 9.114.1 Single rubber stopper each 35.0 9.114.2 Twin rubber stopper each 86.0 80 9.116 81 9.117 82 9.126 83 9.127 84 9.128 85 9.129 9.129.1 Triple strip vertical type. each 28.0 9.129.2 Double strip (horizontal type). each 23.0 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long each set 209.0 9.131.2 450mm long each set 256.0 9.131.3 500mm long each set 302.0 86 9.132 87 9.133 9.133.1 Marine plywood conforming to IS: 710 sqm 1591.0 9.133.2 Fire retardant plywood conforming to IS: 5509. sqm 1660.0 88 9.134.1 9.134.1 1.5 mm thick. sqm 851.0 89 9.134.2 90 9.138 9.138.1 12 mm thick. sqm 919.0 9.138.2 18 mm thick. sqm 1161.0 9.138.3 25 mm thick. sqm 1230.0 91 9.139 92 9.14 9.140.1 18 mm thick sqm 1493.0 9.140.2 25 mm thick sqm 2017.0 93 9.145 9.145.1 Board 12 mm thick sqm 811.0 9.145.2 Board 18 mm thick sqm 943.0 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick sqm 1055.0 9.146.2 25 mm thick sqm 1420.0 94 9.147 95 9.148 96 9.15 9.150.1 12 mm thick commercial ply conforming to IS: 1328 BWR type. Sqm 1210.0 9.150.2 18 mm thick commercial ply conforming to IS: 1328 BWR type. Sqm 1320.0 97 9.158 9.158.1 Extruded section Profile size 48x40 mm. metre 203.0 9.158.2 Extruded section Profile size 42x50 mm. metre 208.0 98 9.165 99 9.166 9.166.1 Plain PVC door shutters. sqm 2026.0 9.166.2 Pre laminated PVC door shutters. sqm 2490.0 100 9.167 101 9.168 as panel. The styles andrails will be mitred cut and joint with the help of PVC solvent cement and self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mmand 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. sqm 2026.0 9.168.2 Decorative finish (both side wood grained finish). sqm 2432.0 102 9.169 9.169.1 Single rebate (75 mm X 50 mm) RM 459.0 9.169.2 Single rebate (100 mm X50 mm) RM 720.0 9.169.3 Single or double rebate (125 mm X 65 mm) RM 923.0 103 9.17 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 2250.0 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3250.0 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3693.0 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 4135.0 104 9.186 105 9.187 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) metre 422.0 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) metre 403.0 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) metre 434.0 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) metre 99.0 9.187.1.5 Glazing bead (12mm x 18mm) metre 130.0 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) metre 495.0 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) metre 519.0 9.187.2.3 Casement Glazing bead (35mm x 18 mm) metre 178.0 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) metre 9.187.3.2 Sliding window Sash (60mm x 44mm) metre 529.0 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) metre 139.0 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) metre 539.0 9.187.4.2 Sliding Door Sash (80mm x 44mm) metre 653.0 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) metre 139.0 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 106 9.188 9.188.1 200 x 19 x 1.9 mm each 321.0 9.188.2 250 x 19 x 1.9 mm each 369.0 9.188.3 300 x 19 x 1.9 mm each 462.0 9.188.4 350 x 19 x 1.9 mm each 526.0 9.188.5 400 x 19 x 1.9 mm each 636.0 107 9.189 108 9.191 109 9.192 110 9.193 111 9.194 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) sqm 6798.0 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). sqm 6221.0 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). sqm 4842.0 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) sqm 6681.0 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) sqm 6942.0 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion67 x 80 all having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) sqm 5290.0 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 4860.0 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made fromroll forming process of required length(shape & size according to UPVC profile),UPVC 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). sqm 7085.0 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±.0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). sqm 7063.0 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm 5060.0 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). sqm 6880.0 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). sqm 5134.0 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area ofwindow above 1.75 sqm). sqm 6371.0 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) sqm 5913.0 112 9.198 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto sqm 4332.0 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). sqm 3532.0 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in- built roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension UPVC extruded glazing beads, UPVC extruded interlock and UPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 2.00 sqm upto 10.00 sqm). sqm 3676.0 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 8.00 sqm upto10.00 sqm). sqm 3810.0 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) sqm 4361.0 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 2.00 sqm upto 5.00 sqm) sqm 5617.0 9.2 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture.M.S. frame sqm 3908.0 113 9.201 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter sqm 2250.0 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter sqm 3229.0 114 9.202 9.202.1 1mm thick laminated sheet sqm 3693.0 9.202.2 0.12 mm thick laminated sheet sqm 3461.0 115 9.255 9.255.1 9 mm thick BWP grade commercial Sqm 841.0 plywood 9.255.2 12 mm thick BWP grade commercial Sqm 1064.0 plywood 9.255.3 18 mm thick BWP grade commercial Sqm 1169.0 plywood 9.255.4 25 mm thick BWP grade commercial Sqm 1366.0 plywood 116 9.256 9.256.1 25 mm outer dia & 300 mm long Each Set 984.0 9.256.2 32 mm outer dia & 450 mm long Each Set 1716.0 9.256.3 32 mm outer dia & 600 mm long Each Set 2041.0 117 9.257 9.196, 9.197, 9.198, 9.199) 118 9.258 9.258.1 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1040.0 119 10.7 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. sqm 747.0 10.7.2 Exceeding 16.80 sqm in area. sqm 782.0 120 10.11 10.11.1 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg 77.0 121 10.12 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. meter 402.0 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 394.0 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. meter 431.0 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 424.0 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. meter 472.0 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 464.0 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. meter 356.0 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 348.0 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. meter 385.0 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 377.0 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. meter 414.0 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 406.0 122 10.14 10.14.1 Hot finished welded type tubes kg 117.0 10.14.2 Hot finished seamless type tubes kg 123.0 10.14.3 Electric resistance or induction butt welded tubes. kg 142.0 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats ofEpoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. kg 132.0 123 10.17 124 10.18 125 10.19 126 10.21 127 10.22 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. kg 101.0 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 105.0 128 10.23 10.23.1 M.S. tube. kg 117.0 10.23.2 E.R.W. tubes. kg 132.0 129 10.25 130 10.26 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides sqm 646.0 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1334.0 131 10.27 10.27.1 With 4.0 mm thick glass panes sqm 792.0 10.27.2 With 5.50 mm thick glass panes sqm 873.0 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. sqm 916.0 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm boxbeading. sqm 611.0 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. sqm 936.0 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 750.0 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 800.0 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 872.0 132 10.28 10.28.1 With 4.0 mm thick glass panes. sqm 259.0 10.28.2 With 5.5 mm thick glass panes. sqm 262.0 133 10.29 134 11.19 11.19.1 Makrana white second quality. sqm 3051.0 11.19.2 Raj Nagar plain. sqm 1381.0 11.19.3 Agaria White/Morgarh sqm 1882.0 11.19.4 Katni marble sqm 1555.0 11.19.5 Black Zebra. sqm 1315.0 11.19.6 Udaipur / Baroda green marble sqm 1649.0 11.19.7 Pink plain marble. sqm 1448.0 11.19.8 Jaisalmer Yellow sqm 1582.0 135 11.2 11.20.1 Makrana white second quality. sqm 3675.0 11.20.2 Raj Nagar plain. sqm 1932.0 11.20.3 Agaria White/Morgarh sqm 2455.0 11.20.4 Katni marble sqm 2113.0 11.20.5 Black Zebra. sqm 1863.0 11.20.6 Udaipur / Baroda green marble sqm 2211.0 11.20.7 Pink plain marble. sqm 2002.0 11.20.8 Jaisalmer Yellow sqm 2141.0 136 11.21 11.21.1 Makrana white second quality. sqm 3773.0 11.21.2 Raj Nagar plain. sqm 2737.0 11.21.3 Agaria White/Morgarh sqm 2553.0 11.21.4 Katni marble sqm 2219.0 11.21.5 Black Zebra. sqm 1961.0 11.21.6 Udaipur / Baroda green marble sqm 2309.0 11.21.7 Pink plain marble. sqm 2100.0 11.21.8 Jaisalmer Yellow sqm 2240.0 137 11.22 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black sqm 1797.0 11.22.2 Granite fine grained dark crystal of other colours and various patterns sqm 2356.0 11.22.3 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Sqm 2113.0 11.22.4 Granite grey/pink/brown with various patterns Sqm 1808.0 11.22.5 Cuddpah stone sqm 1279.0 138 11.23 139 11.24 140 11.25 141 11.29 11.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2919.0 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2675.0 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2370.0 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2705.0 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2486.0 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2212.0 142 11.3 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2642.0 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2422.0 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2153.0 11.30.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2455.0 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2258.0 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2011.0 patterns 143 11.32 144 11.33 11.33.1 Flamed Finish Granite sqm 2542.0 11.33.2 Leather Finish Granite sqm 2809.0 145 11.34 146 11.36 Note: - Deduction shall be made for not mirror polishing according to item no 11.43 147 11.37 148 11.38 11.38.1 10-12 mm thick sqm 1177.0 11.38.2 20 mm thick sqm 1231.0 149 11.39 150 11.4 11.40.1 Marble work meter 164.0 11.40.2 Granite work. meter 269.0 151 11.41 152 11.42 153 11.43 154 11.44 11.44.1 Red sand stone sqm 578.0 11.44.2 White sand stone sqm 578.0 11.44.3 Grey lime stone sqm 578.0 11.44.4 Kota stone sqm 678.0 155 11.47 156 11.48 157 11.49 158 11.52 159 11.53 160 11.54 161 11.55 162 11.56 163 12.63 11.63.1 Fastener with threaded dia 6 mm. each 25.0 11.63.2 Fastener with threaded dia 10 mm. each 29.0 11.63.3 Fastener with threaded dia 12 mm. each 46.0 164 11.66 165 11.72 proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction byusing plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand including locking with M15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade sqm 805.0 11.72.2 60 mm thick C.C. paver block of M-35 grade sqm 680.0 11.72.3 60 mm thick C.C. paver block of M-30 grade sqm 605.0 166 11.75 including fixing of granite stone door frame with epoxy resin based adhesive including secured to the backing by means of cramps, drilling of hole with rawl plugs and screws 75mm long cleaning etc. complete. Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. metre 1010.0 11.75.2 Granite Door frame for 200mm thick wall Thickness. metre 1512.0 167 11.76 11.76.1 Plain ivory light shade sqm 950.0 Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) sqm 1033.0 Size 600X600mm thickness 9-10mm 168 11.77 11. 77.1 Plain ivory light shade sqm 940.0 Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) sqm 1022.0 Size 600X600mm thickness 9-10mm 169 11.8 11.80.1 In light colour and shades as ivory, beige blanco, grey etc. 11.80.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 934.0 11.80.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1206.0 11.80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1349.0 11.80.2 In dark colour and shade etc. 11.80.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 946.0 11.80.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1340.0 11.80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1546.0 170 11.81 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 923.0 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1196.0 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 935.0 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1329.0 171 11.82 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm sqm 1140.0 11. 82.1.2 Size 800X800mm thickness 9-10 mm sqm 1261.0 11. 82.1.3 Size 800X1600mm thickness 9-10 mm sqm 1489.0 11. 82.1.4 Size 1000X1000mm thickness 9-10 mm sqm 1388.0 11. 82.1.5 Size 600X1200 mm thickness 9-10 mm sqm 1235.0 11. 82.1.6 Size 800X1200 mm thickness 9-10 mm sqm 1450.0 11. 82.1.7 Size 1200X1200 mm thickness 9-10 mm sqm 1596.0 11. 82.1.8 Size 1200X1800mm thickness 9-10 mm sqm 1715.0 11. 82.1.9 Size 1200X2400 mm thickness 9-10 mm sqm 2403.0 172 11.83 11. 83.1 For skirting, riser, dado and wall lining etc.glossy/ rustic /stain/mattfinished in all colours and shades 11. 83.1.1 Size 300X600 mm thickness 9-10 mm sqm 1048.0 11. 83.1.2 Size 600X600 mm thickness 9-10 mm sqm 1129.0 11. 83.1.3 Size 800X800mm thickness 11-12mm sqm 1250.0 11. 83.1.4 Size 600X1200 mm thickness 11-12mm sqm 1224.0 11. 83.1.5 Size 800X1200 mm thickness 11-12mm sqm 1440.0 173 11.84 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 2296.0 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 2113.0 11. 84.1.3 Gray/Pink/Brown with various patterns sqm 1879.0 174 11.85 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 1775.0 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 1610.0 11. 85.1.3 Gray/Pink/Brown with various patterns sqm 1404.0 175 11.97 Size 800X1600 mm thickness 8-9 mm Sqm 1778.0 176 11.102 177 11.103 178 12.4 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² meter 500.0 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² meter 431.0 179 12.7 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² meter 459.0 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² meter 402.0 180 12.12 12.12.1 Corrugated serrated adjustable ridges meter 367.0 12.12.2 Plain wing adjustable ridges meter 311.0 12.12.3 Close fitting adjustable ridges meter 420.0 12.12.4 Unserrated adjustable hips meter 506.0 181 12.13 12.13.1 Corrugated apron pieces meter 340.0 12.13.2 Eaves filler pieces meter 232.0 12.13.3 North light curves meter 500.0 12.13.4 ventilator curves meter 622.0 12.13.5 Barge boards meter 623.0 12.13.6 Ridge finials pair 229.0 12.13.7 Special north light curves each 753.0 12.13.8 S type louvers meter 418.0 182 12.14 183 12.15 primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 12.16 12.16.1 Ridges plain (500 - 600mm). meter 320.0 12.16.2 Flashings/ Aprons.( Upto 600 mm) meter 284.0 12.16.3 North light curves. meter 341.0 12.16.4 Barge board (Upto 300 mm) meter 274.0 12.16.5 Crimp curve sqm 315.0 12.16.6 Gutter. (600 mm over all girth) meter 781.0 185 12.17 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. sqm 1031.0 12.17.2 2mm thick flat. sqm 955.0 186 12.23 187 12.24 188 12.26 189 12.27 190 12.32 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) metre 136.0 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) metre 238.0 191 12.33 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) each 67.0 12.33.1.2 110 mm (minimum wall thickness 2.2mm) each 102.0 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) each 121.0 12.33.2.2 110 mm (minimum wall thickness 2.2mm) each 94.0 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) each 176.0 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) each 163.0 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) each 78.0 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) each 112.0 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) each 69.0 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) each 99.0 192 12.34 12.34.1 75 mm (minimum wall thickness 1.8mm) each 97.0 12.34.2 110 mm (minimum wall thickness 2.2mm) each 114.0 hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in adirection perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board. 12.58.1.1 Flat surfaces sqm 676.0 12.58.1.2 Curved surfaces sqm 748.0 12.58.1.3 Sunk or raised mouldings sqm 175.0 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. sqm per meter height 59.0 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I: 2011 (Board with BIS certification marks). sqm 750.0 12.58.2.2 Fire resistant Glass ReinforcedGypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm 866.0 12.58.2.3 12.5mm thick moisture resistant gypsum plasterboards Moistbloc as per BS EN 520 confirming to water absorption class H1 with total water absorption < 5%, Green Pro certified by CII sqm 920.0 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturersspecification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. sqm 1277.0 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured throughautoclaving process. sqm 1150.0 193 13.1 13.1.1 1:4 (1 cement : 4 sand) sqm 173.0 13.1.2 1:6 (1 cement : 6 sand) sqm 160.0 194 13.2 13.2.1 1:4 (1 cement : 4 sand) sqm 184.0 13.2.2 1:6 (1 cement : 6 sand) sqm 168.0 195 13.3 13.3.1 1:4 (1 cement : 4 sand) sqm 245.0 13.3.2 1:6 (1 cement : 6 sand) sqm 225.0 196 13.4 13.4.1 1:3 (1 cement : 3 sand) sqm 210.0 13.4.2 1:4 (1 cement : 4 sand) sqm 203.0 197 13.5 13.5.1 1:3 (1 cement : 3 sand) sqm 236.0 13.5.2 1:4 (1 cement : 4 sand) sqm 220.0 198 13.13 199 13.14 200 13.15 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof sqm 34.0 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof sqm 22.0 201 13.16 13.16.1 In one coat sqm 11.0 13.16.2 In two coats sqm 18.0 202 13.17 13.17.1 In one coat sqm 158.0 13.17.2 In two coats sqm 260.0 203 13.18 13.18.1 Spherical ceiling sqm 42.0 13.18.2 Groined ceiling sqm 47.0 13.18.3 Flewing soffits sqm 28.0 204 13.38 205 13.39 13.39.1 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. sqm 130.0 13.39.2 Extra for making 12mm flute grove with 6 mm depth to prepare the surface even and smooth complete. metre 70.0 206 13.41 207 13.43 208 13.44 209 13.45 210 13.46 211 13.47 13.47.1 One coat. sqm 20.0 13.47.2 Two coats. sqm 32.0 212 13.48 13.48.1 One coat. sqm 37.0 13.48.2 Two coats. sqm 56.0 213 13.49 214 13.51 215 13.52 216 13.53 217 13.54 218 13.54.1 219 13.54.2 220 13.54.3 221 13.55 13.55.1 One coat sqm 63.0 13.55.2 Two coats sqm 101.0 222 13.64 223 13.65 224 13.66 13.66.1 One coat. sqm 35.0 13.66.2 Two coats. sqm 53.0 225 13.68 226 13.71 227 13.77 228 13.8 13.80.1 0.8-1.2mm thickness sqm 368.0 13.80.2 2.0-2.5mm thickness sqm 338.0 229 13.81 effective for 90 Days(03 Months) . 230 13.103 Note:- Applicable to item No. 13.1 to item No. 13.10 231 13.105 13.105.1 Standard pattern and design wallpaper Sqm 615.0 13.105.2 3D pattern and design wallpaper Sqm 750.0 13.105.3 Customize design wallpaper Sqm 1145.0 232 14.5 14.5.1 Float glass panes of thickness 4 mm sqm 679.0 14.5.2 Float glass panes of thickness 5.5 mm sqm 759.0 233 14.6 14.6.1 Float glass panes of thickness 4 mm sqm 801.0 14.6.2 Float glass panes of thickness 5.5 mm sqm 882.0 234 14.7 14.7.1 Float glass panes of thickness 4 mm sqm 697.0 14.7.2 Float glass panes of thickness 5.5 mm sqm 778.0 235 14.8 14.8.1 2nd class teak wood fillets meter 30.0 14.8.2 Haldu/Bija/Kail wood fillets. meter 26.0 236 14.11 237 14.24 238 14.27 239 14.28 240 14.29 241 14.31 242 14.36 243 14.37 244 14.38 245 14.39 246 14.48 247 14.49 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. sqm 42.0 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm 30.0 248 14.51 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). sqm 87.0 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 52.0 249 14.52 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. sqm 65.0 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 41.0 250 14.53 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. sqm 58.0 251 14.62 14.62.1 (one or more coats) sqm 9.0 14.62.2 (two or more coats) sqm 11.0 252 15.2 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). cum 578.0 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). cum 356.0 253 15.6 15.6.1 In lime mortar with old mughal bricks. cum 421.0 15.6.2 In lime mortar. cum 202.0 15.6.3 In cement mortar. cum 487.0 254 15.7 15.7.1 From brick work in lime mortar. 1000 nos 1254.0 15.7.2 From brick work in cement mortar. 1000 nos 1560.0 255 15.8 15.8.1 In lime mortar. cum 275.0 15.8.2 In cement mortar. cum 582.0 256 15.13 257 15.14 15.14.1 Of area 3 sq. metres and below. each 85.0 15.14.2 Of area beyond 3 sq. metres. each 117.0 258 15.15 15.15.1 Of area 3 sq. metres and below. each 33.0 15.15.2 Of area beyond 3 sq. metres. each 44.0 259 15.47 260 15.48 261 15.49 262 15.51 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep each 611.0 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. each 1069.0 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. each 2023.0 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep each 1553.0 263 15.52 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. each 486.0 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. each 579.0 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). each 468.0 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). each 322.0 264 15.64 265 17.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each 2995.0 266 17.2 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid. each 3036.0 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid. each 3013.0 267 17.3 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. each 4613.0 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. each 4590.0 268 17.11 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. each 2187.0 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tap. each 1938.0 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. each 1664.0 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. each 1775.0 269 17.12 270 17.14 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. each 8074.0 17.14.1.2 510x1040 mm bowl depth 225mm. each 7609.0 17.14.1.3 510x1040 mm bowl depth 200mm. each 7493.0 17.14.1.4 510x1040 mm bowl depth 178mm. each 5286.0 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. each 4583.0 17.14.2.2 610x460 mm bowl depth 200 mm. each 4351.0 17.14.2.3 470x420 mm bowl depth 178 mm. each 3422.0 271 17.22 17.22.1 White each 945.0 17.22.2 coloured each 1037.0 272 17.24 17.24.1 White each 456.0 17.24.2 Black each 433.0 17.24.3 Coloured (other than black and white) each 688.0 273 17.25 274 17.6 17.60.1 75 mm each 33.0 17.60.2 110 mm each 50.0 275 17.61 276 17.64 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia each 87.0 17.64.1.2 40 mm dia each 98.0 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia each 87.0 17.64.2.2 40 mm dia each 98.0 277 17.65 278 17.67 279 17.67 17.68.1 Circular shape 450mm dia. each 806.0 17.68.2 Rectangular shape 453x357mm each 642.0 17.68.3 Oval shape 450x350mm (outer dimensions) each 697.0 17.68.4 Rectangular shape 1500x450 mm each 1311.0 280 17.69 281 17.7 17.70.1 C.P. brass each 340.0 17.70.2 Vitreous china each 324.0 282 17.74 283 17.75 284 17.76 285 18.6 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia .Pipes metre 129.0 18.6.1.2 20 mm nominal outer dia .Pipes metre 153.0 18.6.1.3 25 mm nominal outer dia .Pipes metre 177.0 18.6.1.4 32 mm nominal outer dia .Pipes metre 254.0 18.6.1.5 40 mm nominal outer dia .Pipes metre 354.0 18.6.1.6 50 mm nominal outer dia .Pipes metre 528.0 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes metre 207.0 18.6.2.2 20 mm nominal outer dia .Pipes metre 234.0 18.6.2.3 25 mm nominal outer dia .Pipes metre 288.0 18.6.2.4 32 mm nominal outer dia .Pipes metre 360.0 286 18.7 External Work 18.7.1 15 mm nominal outer dia .Pipes metre 122.0 18.7.2 20 mm nominal outer dia .Pipes metre 141.0 18.7.3 25 mm nominal outer dia .Pipes metre 185.0 18.7.4 32 mm nominal outer dia .Pipes metre 238.0 18.7.5 40 mm nominal outer dia .Pipes metre 324.0 18.7.6 50 mm nominal outer dia .Pipes metre 498.0 18.7.7 62.50 mm nominal inner dia .Pipes. metre 1429.0 18.7.8 75 mm nominal inner dia .Pipes. metre 2018.0 18.7.9 100mm nominal inner dia .Pipes. metre 2791.0 18.7.10 150 mm nominal inner dia .Pipes. metre 3358.0 287 18.13 18.13.1 25 mm nominal bore each 428.0 18.13.2 32 mm nominal bore. each 500.0 18.13.3 40 mm nominal bore each 584.0 18.13.4 50 mm nominal bore each 749.0 288 18.14 18.14.1 15 mm nominal bore each 316.0 18.14.2 20 mm nominal bore each 431.0 18.14.3 25 mm nominal bore each 499.0 289 18.17 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore each 88.0 18.17.1.2 20 mm nominal bore each 129.0 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore each 149.0 18.17.2.2 20 mm nominal bore each 184.0 290 18.18 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. each 916.0 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. each 870.0 291 18.28 292 18.29 18.29.1 15 mm nominal bore each 306.0 18.29.2 20 mm nominal bore each 338.0 293 18.3 18.30.1 15 mm nominal bore each 318.0 18.30.2 20 mm nominal bore each 344.0 294 18.31 295 18.32 296 18.33 297 18.34 298 18.35 299 18.36 300 18.37 301 18.38 302 18.39 303 18.41 304 18.42 305 18.43 18.43.1 100 mm diameter each 806.0 18.43.2 150 mm diameter each 922.0 18.43.3 200 mm diameter each 1336.0 306 18.64 307 18.65 308 18.67 309 18.68 18.68.1 300 mm long each 450.0 18.68.2 600 mm long each 650.0 310 19.4 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) metre 234.0 19.4.2 160 mm diameter OD (min. wall thickness 4.0 mm) metre 477.0 19.4.3 200 mm diameter OD (min. wall thickness 4.9 mm) metre 751.0 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) metre 972.0 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) metre 1232.0 311 19.5 19.5.1 110 mm diameter PVC. pipe metre 576.0 19.5.2 160 mm diameter PVC. pipe metre 704.0 19.5.3 200 mm diameter PVC. pipe metre 821.0 19.5.4 250 mm diameter PVC. pipe metre 949.0 19.5.5 300 mm diameter PVC pipe metre 1078.0 312 19.6 19.6.1 110 mm diameter PVC. pipe metre 274.0 19.6.2 160 mm diameter PVC. pipe metre 444.0 19.6.3 200 mm diameter PVC. pipe metre 521.0 19.6.4 250 mm diameter PVC. Pipe metre 607.0 19.6.5 300 mm diameter PVC pipe metre 700.0 313 19.7 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks each 1764.0 19.7.1.2 With Sewer bricks conforming to IS : 4885 each 1668.0 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks each 1803.0 19.7.2.2 With sewer bricks conforming to IS : 4885 each 1707.0 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks each 1913.0 19.7.3.2 With Sewer bricks conforming to IS : 4885 each 1818.0 314 19.9 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks each 7997.0 19.9.1.2 With Sewer bricks conforming to IS : 4885 each 7747.0 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight offrame 58 kg) : 19.9.2.1 With well burnt bricks each 18086.0 19.9.2.2 With Sewer bricks conforming to IS : 4885 each 17402.0 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) 19.9.3.1 With well burnt bricks each 21816.0 19.9.3.2 With Sewer bricks conforming to IS : 4885 each 21228.0 315 19.1 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks metre 6176.0 19.10.1.2 With Sewer bricks conforming to IS : 4885 metre 5448.0 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks metre 7380.0 19.10.2.2 With Sewer bricks conforming to IS : 4885 metre 6512.0 316 19.12 19.12.1 With well burnt bricks metre 5257.0 19.12.2 With Sewer bricks conforming IS : 4885 metre 4648.0 317 21.1 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 378.0 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 416.0 21.1.1.3 Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) kg 426.0 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 446.0 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 484.0 21.1.2.3 Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) kg 494.0 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. kg 80.0 318 21.2 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. sqm 802.0 21.2.2 Pre-laminated particle board with decorative lamination on both sides. sqm 907.0 319 21.3 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm 774.0 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than sqm 948.0 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). sqm 1182.0 320 21.5 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness each 1890.0 21.5.2 With brass cover plate - minimum 1.25 mm thickness. each 2072.0 321 21.16 21.16.1 Anodized (AC15 ) aluminium each 62.0 21.16.2 Powder coated minimum thickness 50 micron aluminium each 65.0 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. each 69.0 322 21.17 323 21.18 324 21.19 325 21.21 326 21.22 327 21.23 328 21.24 329 21.32 330 22.6 a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 331 22.14 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cum 6569.0 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) cum 9308.0 22.14.3 Cement mortar 1:4 (1cement : 4 sand) cum 8437.0 332 25.1 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440X575X250mm With integral foot rests. (Premium Range) each 4726.0 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410X515X255 mm with integral foot rests.(Premium Range) each 4392.0 333 25.2 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan Size 360X545X395 with solid poly propelyne made soft closing seat cover (Premium Range) each 9788.0 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360X475X395 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 8742.0 334 25.3 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380X520X375 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 26412.0 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390X570X365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 23559.0 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500 x 330mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 21099.0 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500 x 330mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) each 18838.0 335 25.4 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420X710X810mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 28103.0 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380X610X805mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 19275.0 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18952.0 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375X650X800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18023.0 336 25.5 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) Each 34317.0 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 25954.0 25.5.3 Anti germ Fluoro-Polymer Coated Single PieceW.C. Pan Size 385X720X710mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 22237.0 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 19450.0 337 25.6 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 380X650X730mm with solid poly propelyne made soft closing seat cover (Premium Range) each 13365.0 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 375X360X750mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) each 10670.0 338 25.7 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595X435X185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) each 16581.0 339 25.8 25.8.1 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x415x200mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system with square wall flance & spout complete (decol technology). (Premium Range) each 14543.0 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570X820X195mm with 15 mm C. P. Table Top pressmatic Pillar cock auto closing system (decol technology). (Premium Range) each 13614.0 340 25.9 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) each 15591.0 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) each 14940.0 341 25.1 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) each 18585.0 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) each 16785.0 342 25.11 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) each 14544.0 25.11.2 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal size 475X315X715 mm top inlet with fixing accessories (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) with 15mm Brass made Pressmatic auto closing open urinal flush valve with wall flange (Decol technology, 400000 operation warranted) complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : each 13336.0 25.11.3 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal back inlet with fixing accessories (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) Size 385X325X635 mm with Concealed sensotronic flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : URS-WHT-13253N & PRS-CHR-073 each 10641.0 343 25.12 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve battery & electrical oprated type (9V transformer) for urinal complete set with installation box with control cock. (Premium Range) each 23927.0 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) each 20025.0 344 25.13 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480 X 300X740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) each 18491.0 345 25.14 346 25.14.1 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor battery & electrical oprated type (9V transformer) for flushing. (Premium Range) each 22998.0 347 25.15 348 25.16 349 25.17 350 25.18 351 25.19 352 25.21 353 25.22 354 25.23 355 25.24 356 25.25 357 25.26 358 25.27 359 25.28 360 25.29 361 25.31 362 25.32 363 25.33 364 25.34 365 25.35 366 25.36 367 25.37 368 25.38 369 25.39 370 25.41 371 25.42 372 25.43 373 25.44 374 25.45 375 25.46 376 25.47 377 25.48 378 25.49 379 25.51 380 25.52 381 25.53 382 25.54 383 25.55 384 25.56 385 25.57 386 25.58 387 25.59 388 25.61 389 25.62 390 25.63 vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 14729.0 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) each 15100.0 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) each 18490.0 391 25.64 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 10617.0 Note- Schedule of items includes all the items required for maintainance of buildings regarding A/R, S/R MOW, Deposit & Other Works as per SCHEDULE OF RATES FOR BUILDING WORKS inforce from 01/01/2024, issued by Project Director, Public Works Department (PIU) M.P. Bhopal. Sub Engineer Sub Divisional OfficerSurvey Sub Division.P.W.D. Bhopal Executive EngineerMaintanance Division No.2P.W.D. Bhopal
Contract Date: Apr 23, 2026 Contract Value : 21.93 Lakh
Government Departments No of Bidders 5
Madhya Pradesh View Result →
3.
Water Resources and Irrigation #11299055 Technical Bid
Tender for Repairs To 400Kva Electrical Transformer At Lis Ratti Bhakta. , Repairs To 400 Kva Transformer Installed At Lis Ratti Bakhta By Disconnecting The Electric Transformer From The Input And Output Power Connections, Lifting Of Electric Transformer From Its Installed Position By Using Manual Labour And A Hydra And Then Shifting It To Workshop By Using Carriage Vehicle. Completely Dismantling The 400 Kva Transformer At The Workshop By Way Of Extracting Out The Damaged Coils, Lt Bushes, Ht Bushes, Rubber Gasket, Nuts And Bolts. Rewinding Of Ht Coils On One Damaged Transformer Leg With Standard Copper Winding Gauge And Proper Insulation & Taping. Reconditioning Of 3 Nos. Lt Leg Coils Using Quality Insulation Material. Repairs To Core Of Transformer By Replacing The Flashed Core Material. Heating Of Assembled Coils In An Oven For Proper Hot Air Process And To Obtained The Required Megger Value. Repairs To The Oil Tank By Welding To Make The Oil Tank Leak Proof And Air Tight. Properly Cleaning The Oil Tank With Scrubbers To Remove All Carbon Deposits. Lowering Of The Coils Inside The Sump Of The Transformer. Providing And Fitting Of Lt And Ht Bush Rod Sets, New Insulator, New Nuts And Bolts. Filling The Existing Transformer Oil In The Sump After Giving Heat Treatment/Reconditioning To Make It Moisture Free. Job Further Includes Providing And Filling 100 Liters Of Fresh Transformer Oil For Topping Up The Transformer. Refitting Of The Top Cover Of Transformer By Providing And Fitting Of New Top Gasket Sheets, Nuts And Bolts Of Appropriate Sizes. Testing The Continuity Of Each Phase And Securing All Connections. Shifting Back The Repaired Electric Transformer To The Site, Unloading And Installing At Site With The Help Of Hydra, Manual Labour, Connecting Of Ht And Lt Power Connections. Testing Of Transformer On No Load And Full Load. The Estimate Has Been Framed After Deducting The Rebate On Old Damaged Copper Coils .The Job Includes The Cost Of Materials, (Skilled/Unskilled) Labour Charges, Hydra Charges, Loading, Unloading, And Transportation Charges To & Fro, Testing And Installation, Tools And Tackles Used During The Execution Of The Job. Complete Job. Note: The Firm Should Offer Rebate On Old Material/Parts Except Damaged Copper Coils. The Tenderers Are Requested To Visit The Site And Quote The Rates As Per Site Conditions. Any Modifications/ Alterations Of The Job, Absolutely Necessary If Required At The Time Of Execution May Be Done As Per Actual Site Conditions. , Rebate On Old Parts
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
4.
Housing Urban and Rular Development #11294593 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Ns Item - Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (35 Sqmm Size) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 200 Kva (As Per Parameters Of Cpcb 4) 200 Kva (As Per Parameters Of Cpcb 4) , Supplying, Erection, Testing And Commissioning Of Horizontal Centrifugal Clear Water Pumping Set Capacity 2780 Lpm X 50 M Head, 45 Bhp Motor, Complete With Installation At Mbs Near Yamuna River. , Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 45 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Design, Construction, Erection And Commissioning Of 2 No. Ranneywell 1 At Machhrola And 1 At Jajjal (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 32 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 2.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
5.
Public Administrative Department #11290947 Technical Bid
Tender for Cartage Of Malva, Silt, Sludge Kankar And Other Disposable Organic Material Etc. All Complete With Labour T&P Including Cartage Of 8 Km. (Chapter No.3 Si.No.8) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (1 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (2 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (3 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Earth Work In Filling In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 8Km. Form The Foundation Trenches Including Royalty@ 9.00 Per Cum. (Chapter No.4 Pwd.Sch.-253(A)+ Cptr No. 3 1 To 8 Km.) , Earth Work In Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Earth Work In Excavation In Foundation In Ordinary Soil Mixed With Moorum Shingle Kankar Requiring The Use Of Special Tools And Plants Such A Pick Axes Subbals Etc. Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Extra For Earth Work In Embankment Mechanically Compacted To 98% Proctor Density Ln Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work In Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulverization Surfacing Including Supply Of Labour, T&P, Roller And Water Sprinkle , Back Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Upto 1.5 M Incl. Cost Of All Labor Complete As Per Specifications , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 1.50M To 3M. , Supply & Fixing 3.5Kg And Or As Specified By The Manufacture, Harderner In Trexim Concrete Per Sqm. , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 3.00M To 4.50M. , Cleaning Jungles Including Uprooting Of Trunk Vegetation Grass, Bushes, Wood Trees And Sapling Of Girth Upto 30Cm Measured At A Height Of 1 Meter Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 Meters Out Side The Periphery Of Area Cleared. , Removal Of Silt For Nala/Nali In Liquid Mud Or Faul Position With Special T&P Including Lead 30M And Lift Up To 3.00M Etc. All Complete. (As Per Attached Sanctioned Rate Analysis) , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 4.50M To 6.00M. , Earth Work In Cutting Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Lavels And Slops And Also Including 1.5 M Lift And 30 M Lead. The Earth In Form Of Cutting (B) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge Etc. All Complete. (4-Chapter Si.No.3) , Sand Filling In Plinth Including Supply Of Necessary Quality Of Local Sand From A Distance Not Exceeding 8 Kms From The Site Of Work And Including Watering Dressing Etc.Required For Proper Completion Of Work (Chapter No.4 Si.No.6 ) , Providing And Laying Cement Concrete In 1:5:10 (1 Cement :5 Fine Sand 10 Stone Ballast 40 Mm Gauges) And Curing Complete, Including Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.1) , Providing And Laying Cement Concrete In 1:4:8 (1 Cement:4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors (5-Chapter Sr.No.2) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand :6 Gladed Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.3) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors. (5-Chapter Sr.No.5) , Providing And Laying Cement Concrete In 1:2:4 (1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 40 Mm Noffrinal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors..(5-Chapter Sr.No.6 Si.No..4.1.3) , Providing And Laying Cement Concrete In 1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors. (5-Chapter Sr.No.7) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement -All Work Up To Plinth Level: 1:2:4 (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete , Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Up To Plinth Leuel:1:2:4 In Raft Foundation (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Trp To Plinth Level : 1:1.5:3 (1 Cement:1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) Ch-S Si No- 5,1.2 , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete,Slab Including The Cost Of Centering, Shutterang, Finishing And Excluding Reinforcement - Above Plinth Level Upto Fifth Floor Lable : 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Above Plinth Level Upto Fifth (V) Floor Lable , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Balconies, Shelves, Chajjas, Bands, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing Exlcuding Reinforcement, With 1:1.5:3 In Heavier Beam (1 Cement: 1.5 Coarse Sand(Zone-Lll) : 3 Graded Stone). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Work Up To Plinth Level (5-Chapter S.I. No.-16) , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Works Above Plinth Level Upto Floor V Level (5-Chapter S.I. No.-16) , Class-150 (Non Modular) Brick Work In 1:6 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. ( Chapter No. 06 Sr.No. 1) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Foundation And Plinth Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapter No. 06 Sr.No. 2) , Class-150 (Non Modular) Brick Work In 1 :4 Cement And Fine Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Only 80Mm Thick Wall). (Chapter No. 06 Sr.No.3) , Class-150 (Non Modula0 Brick Work In L:3 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Chapter No. 06 Sr.No.4) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. (Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortor In Super Structure Above Plinth Level Upto Floor Five Level For Wall Thickness More Than 12Cm. Including Supply Of All Material, Labour And Tools And Plants Etc. All Complete. {Chapter No.6 Si.No.2+6} , Add Extra To Ltem No. 1 To 4 Above For Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 12Cm And Less. (Chapte No. 06 S.I. No. 2+4) , Add Extra To Ltem No. 1 To 4 Above But In Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 8Cm And Below. (Chapte No. 06 S.I. No. 2+4) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.1} , Providing And Laying Damp-Proof Course 25 Mm Thick With Cement Concrete 1:2.4 (1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.2} , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Vg-10 Of Approved Quality Using 1.7K9 Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Piece Of Cloth Lightly Soaked In Kerosene Oil.. {Chapter No.07 Si.No.3} , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (A) 35Mm Thick. (Chapter No.9 Si.No.1-9.21.1) , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (2) 30Mm Thick. (Chapter No.9 Si.No.1-9.21.2) , Providing & Fixing 1.00 Mm Thick Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Uality Conforming To Is : 2046 Type S, Including Cost Of Aadhesive Of Approved Quality. , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styless And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shal Be Flat And 20 Mm Shalll Be Tapered In 45 Degree Angle On Both Sides Forming Styless And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail And Lock Rails Shall Be Top, Bottom And Lock Rails Shall Be Provided Both Sides Of The Panel. 10 Mm (5 Mm X 2) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail. Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/Sealed To The Styles & Rails With 7 Mm (5 Mm + 2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interrior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing.30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Ls: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 5.5 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 8.0 Mm Thickness , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315 , Having Brand Logo Embossed On The Body/ Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors ,Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor . Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Entineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. , Providing And Tixing Factory Made Upvc White Colour Casement/ Casement Cum Frxed Glazed Door Comprising Of Upvc Multi-L Chambered Frame. Sash And Mullion (Where Ever Required) Extrlcled Profiles Dl,Ly Reinforced With 1.60 T 0 2 Mm Thick I Galvalized Mild Steel Section Made From Roll Forming Process Of Iequrred Length {Shape & Size According To Upvc Profile), I Ldvc Extruded Glazing Beads Of Appropriate Dimension. Epdi\/L Gasket. Znc Alloy (White Powder Coated) 3D Hrnges And One Handle On Each Side Of Panels Along With Zinc Plated Mild Steel Rnulti Point Locking Having Transmission Gear, Cylinder With Keeps And One Sicle Key, G.L Fasteners 100 X I Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Weldecl Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. Afier Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approvecl Quality, All Complete As Per Approved Drawing & Cllrection Of Engineer-In-Charge. (Single I Double Glass Panes And Sllicon Sealent Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerance In Dlrnension I.E. In Depth & Width Of Profile Shall Be Acceptable Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Rm & Sasn 67 X 1 10 Mm Both Having Wall Thickness Of 2.3 I 0.2 ^Rr Ancl Single Glazing Bead / Double Glazing Bead Of Lappopiate D.Mersion. (Area Of Door Upto L2 00 Sqm). , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Structural Steel Work In Single Section, Fixed With Or Withoul Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required Heavy Size Such As Trusses Built , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Apptying A Priming Coat Of Approved Steel Primer.(Chapter No.10 Si.No.4-10.3) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pjpe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\4.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover (Upto 10.00 Sqm).(Chapter No.10 Si.No.4-10.5) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\Il.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X,1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 10.00 Sqm And Upto 16.80 Sqm/Above In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete. Hot Finished Welded Type Tubes , Supply And Fixing Stainless Steel (Grade 304) Ralling Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Steel Nuts And Bolts Complete. I/C Fixing The Ralling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts Fasteners Etc.). (Chapter No.10 Si. No. 14 New) , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1 .4 Mm Aperture On Both Sides , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Stainless Steel (Grade 304) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides , Painting Top Of Roofs With Bitumen Of Approved Quality @ 17Kg Per 10 Sqm Impregasted With A Cost Of Coarse Sand At 60 Codm Per 10 Sgm, Including Cleaning The Slab Surface With Keroseme Oil Complete : With Residual Type Petroleum Bitmen Of Grade Vg-10 , Providing And Laying Integral Cement Based Water Proofing Itreatment Including Preparation Of Surface As Required For Itreatment Of Roofs, Balconies, Terraces Etc Consisting Of Lfollowing Operations: (A) Applying A Slurry Coat Of Neat Cement Lusing 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Lcompound Conforming To Ls. 2645 And Approved By I E Ng Ineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Lupto 300 Mm Height Including Cleaning The Surface Before Llreatment. B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 125 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 L Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Ofjunctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Lb : 2645 And Approved By Engineer-In-Charge (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix L:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Includlng Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finjshing The Surface With Lrowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :Wth Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65Mm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 80 Mm Thick With Zinc Coating Not Less Than 275 Gm/ Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M , Providing And Laying Six Courses Water Proofing Teatment With Bitumen Felt Over, Roofs Consisting Of First, Third And Llfth Course Of Blown Bitumen 85/25 Or 9O/15 Conforming To Ls : 702 Applied Hot @ 1.45, L.2O And 1.45 Kg Per Square Metre Of Area Respitively, Second And Fourth Courses Of Roofing Felt Lype 3 Grade I Conforming To Ls : 1322 (Hessian Based Self Flnished ;Itumen Felt) , Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Sqm Iniluding Preparation Of Surface But Excluding Grading, Complete. , 10 Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: With Common Burnt Clay F.P.S.(Non Modular) Brick Tile Of Class Designation 10 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineerin-Charge) 0 50 Mm (+ 0.05 %) Total Coated Hickness With Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Icrons Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge, The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roollng Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Ridges Plain (500 - 600Mm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Ls: 12823 Grade Ltype Ll, In Anelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing 12 Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. I\4Arine Plywood Conforming To Ls: 710 , Providing And Fixing Tiled False Ceiling Of Specilled Materials Of Size 595X595 Mm In Lrue Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanlzed @ 120 Grams/ Sqtn, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel Lo Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Iight Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gl Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T- Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gl Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G Lsheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Ls 8225:1987, Light Reflectance Of 85%(Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bsi476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991,In True Horizontal Level Suspended On Inter- Locking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 24X38 Mm Of Length 3000 Mm, Cross - T Of Size 24X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 24X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, I Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Ol Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 460 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-Incharge. With 15 Mm Thick Tegular Edged Light Weight Calcium Silicate False Ceiling Tiles. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Fine Sand (Not Less Than In 1.25 Fm) Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:3 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:4 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 20 Mm Cement Plaster 1:3 (L Cement:3 Coarse Sand) Linished With A Floating Coat Of Neat Cement. , 20Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding Bomm. Ln Girth And Finished Even And Smooth , 6Mm Thick Celling Plaster 1:3 (1 Cement :3 Fine Sand) Cement & Fine Sand In F.M Not Less Than 1.25, 1:3 Including Chipping Of Reinforced Cement Concrete Surface Before Celing Plaster. The Cost Of Including At Material, Labor T&P And Scafolding Etc Complete. (Chapter No.13 Si.No.13) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Morlar1:4 (1 Cement: 4 Coarse Sand) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Including 50Mm Thick Base With Concrete 1:4Rb Complete As Per E/L , Marble Tiles Stone Slabs 18 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With : Marble White Dhungriquality , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With: White Alebeta White Stone , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand) : 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Moftar 1:5 (L Cement: 5 Coarse Sand)With Joints Finished Flush.Red Sand Stone , Prividing & Laying Ceramic Non Skid Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming Tq Ls : 15622 Of Approved Make In Colours Such As White, Lvory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Ioints With White Cement And Matching Pigment Etc., Complete. , Providing & Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Ls : 15622 (Thickness To Be Specified By The Manufacturer )Of Approved Make In Atl Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Morta|L:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 33Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Vitrified Tiles 500X500mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providing And Laying Vitrified Tiles 600X600mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providlng And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge.{Chapter No.14 Si.No.27} , Stone Work (Machine Cut Edges) For Wall Llning Etc. (Veneer Work) Upto10 Metre Height, Backing Filled With A Grout Of Avercge 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Polnting In White Cement Mortar 1:2 (1 White Cement R 2 Stone Dust) Wlth An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Plns Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Flne Dressed With Rough Backing. 30 Mm Thick , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. Including Curing The Cost Of All Material, Labour, T&P Etc. Complete. (Chapter No.15 Si.No.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Ofwork. , Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) Supply Of All Labour Material And T&P Requlred For Proper Completion Of Work. , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 328 Ll Lo Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20K9/10 Sqm Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade ; New Work (Two Or More Coat Applied @ 1.67 Llth) Sqm Over And Including Priming Coat Ofexterior Primer Applied @ 2 20 Kg/10 Sqm) Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/L0 Sqm Over An Under Coat Of Primer Applled @ O.B0 Ltr/10 Sqm Of Approved Brand And Manufacture. Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacturb Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Paint Of The Two Coat Over Primer Coat Wood Surface And Etc. All Complete.(15-Chapter Si.No.8+10+11) , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Upto 10 Cm In Width , Applying Priming Coat: With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood) Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Of Work , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work Includlng Cost Of All Materials, Labour T&P Etc. Required For Proper Completion Of Work Wood And Steel , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..One Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..Two Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Sudace Smooth Including Necessary Repairs To Scratches Etc. Complete. , Distempering With Lst Quality Acrylic Distember (Ready Mix) Having Voc Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture To Give An Even Shade:Old Work (One Or More Coats) , White Washing Wth Lime On Undecorated Wall Surface (One Coat) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , White Washing Wth Lime On Undecorated Wall Surface (Three Or More Coats) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , Colour Washing Such As Green, Blue And Other Coloures Or Buff To Give An Even Shade New Work Colour Washing (Two Coats) With A Base Coat Of White Washing With Limes Including Cost Of All T&P Other Complete Work. , Removing White Or Colour Wash By Scrapping And Sand Papering And Pteparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete , Demolishing Cement Concrete Manually Including Disposal Of Materialwithin 50 Metres Lead , Dismantling Reinforced Cement Concrete Or Reinforced Brick Work Including Stacking Of Materials As Directed By E/Ic With In A Distance Of 60 Meters (200 Feet). (17-Chapter Pwd. No.694) , Demolishing R.B. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-Incharqe. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar. (17-Chapter Si.No.6) , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Eng;Neer-In-Charge : Ln Lime Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: R.S. Joists , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. (17-Chapter Si.No.16) , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Wlthin 50 Metres Lead. , Dismantling Of Old Interlocking Tiles Pavement Including Staking Of Serviceable Material And Disposal Of Unserviceable Material Within Lead Of 50M As Per Direction Of Engineer In Charge. (Ns) , Random Rubble Masonry 1:6 (1 Cement: 6 Coarse Sand), With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size).Upto Plinth Level With , Random Rubble Masonry 1:6 (1 Cement : 6 Coarse Sand), With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (L Cement:6 Coarse Sand:12 Graded Stone Aggregaie 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like , 30 Mm Red Sand Stone Sun-Shade (Chisel-Dressed) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Finishing Complete. , Providing And Fixing Red Sand Stone Jali 40 Mm Thick Throughout In Cement Mortar 1R3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick (Chapter No.18 Si.No.7) , Supply And Fixing 500 Liter Pvc. Sintex Water Tank Etc. All Complete. (19-Chapter Sr.No.2(C)) , Laying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412 , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Constuction Of Un-Reinforced, Plain Cement Concrete Avement Thickness As Per Disign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M-30 (Grade), Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exeeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Acapacity And Apporopriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Aperation Including Provision Of Contraction, Expansion, Construction And Constructionl Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14 Days, Curing Comound (Where Apecified) And Water Finishing To Lines And Grade As Per Drawing And Technical And Technical Sepcification Clause 1501. (For Agra). (Chapter No.20 Si.No.12) , Construction Of Un-Reinforced, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approve Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Ls 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Prim Er, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing For Agra , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work.80 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Coloured) , Re-Laying Of I Shaped Precast Interlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50Kg) Including 25Mm Thick Loacal Sand Base Levelling And Ressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Comlete Work. Including Vat (Chapter No.20 Si.No.19 New Item) , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe. (Lnternal Work - Exposed On Wall) 32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 40Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 50Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 15 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 20 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 25 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 32 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 40 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 62.50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 75 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 100 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 150 Mm Nonrinal Dia Pipes , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 15 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 20 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 25 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 32 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 40 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 50 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 15 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 20 Mm Dia Nominal Bore , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 60X60x75 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 90X90x100 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 120X120x100 Cm Lnside , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Ls : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Lsl Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Three Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Four Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require: (White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C. P. Brass Pillar Taps) {Chapter No.24 Si.No.5A} , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pajr Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillartap , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.6A) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pi Pe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Ls:2556, C.L. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittlngs And Cutting And Making Good The Walls And Floors Wherever Requlred:Range Of Two Half Stall Urinals With 5 Litre Pvc. Automatic Flushing Cistern , Constructing Brick Masonary Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (A) Inside Dimensions 455X610mm And 45Cm Deep For Single Pipe Line : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.6A) , Constructing Brick Massonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 600X850mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (C) Inside Dimensions 600X850mm And 45Cm Deep For Pipe Line With Three Or More Inlets : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.8C) , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) Hindi Letters , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) English Letters , Reinforced Cement Concrete M15 Grade Boundary Pillars/ Wheel Guard Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.2 Metre High , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.8 Metre High , Deduction Of Cost Brick/Bats. (Chapter No.1 Sr.No.2(C)) , Deduction Cost Of Material Old Workable Bricks Etc. All Complete. , Road Delinator Delinealor Supply & Fixing Of M S Delineator Made Of L\Lild Steel With Pllre Polyester Powder Coating With The Minimum Thickness Of Powder Coating Of Not Less Than 40 Micron For Prolectlon Against Corlosion The Surface Should Be Concealed So That There Sholrld Not Be Any Exposed Surface Wilhout Powder Coating. Alternatively, These Metal Guide Poles Can Be Concealed With Thermoplastic Body. The Posts Shall Have Lan Ellipsoidal Or Circular Design Wilh The Height Of The Pole Shall Be 800 To 900 Mm Above The Ground With About 200 To 300 Mm Base Which Can Be Anchored Onto The Ground Mild Steel Guide Poles Shall Conform To Type Xl Sheeting Specifications As Per Lrc67 And Ast Ii D4956 Which Would Ensure To Obtainl Clear Visibility Of The Road Alignment During Nighl Time. The Relro Reflective Sheeting Shall Be Tested For Acertificale Of Having The Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Iiner Removal, Adhesion,Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdooa Weathering And Ils Having Passed These Tests Shall Be Obta Ned From Lnlernational/Government Laboratory / Lnslitute By The Manufacturer Of The Sheeinq And In Case The Cerliflcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condillon Within 3 Years Of Launching Of Product By The Manufaclure In Abroad. Alternatively, A Certillcate Conforming To Astlvl Specification (D4956 09) On Adficial Accelerated Weatherlng Requirements From A Reputed Laboratory In Lndia Can Be Accepted providing Sionally. Ln Such A Siluation, The Employer / Clienl, If So Desires, Collld Seek For A Performance Guarantee Which Would Be Released Alter Receipt Of Certiflcate Meeting The Requ Rement Of Three Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Report Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour. T&P, Transportation, Installation And Incidentals All Complete As Per D Recllon Of The Engineerincharge , Road Marking With Hot Applied Thermoplastic Compound With Reflectrosing Glass Beads On Bituminous Surface. Providing & Laying Of Hot Applied Thermoplastic Compound 2.5Mm Thick Including Reflecto Rising Glass Beads @ 250Gm/Sqm. Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass, Beads As Per I.R.C. 35. The Finish Surface To Be Level Uniform And Free Form Steaks And Holes Composition Of Thermoplastic Material Shall Be As Per Table 800-3 Of Clause 803 Of Morth Including Cost Of Work As Per Direction E/Ic. (Chapter-28 Si.No.2) , Road Marking With Hot Appliod Ths.Moplastic Compound With Roflsctorlsing Glass Boads On Bituminous Surface. (Ropoated / Tranvers Bar) Providing And Laying Of Hot Applied Thermoplastic Compound 5 Mm Thick Lncludlng Reflectorising Glass Beads 0) 5Oo Gms Per Sqm Area, Thickness Of 5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35-2015 The Llnished Surface To Be Level, Uniform And Free From Streaks And Holes , 6M Span Over Head Cantilever Structure With 300 Dia M S One Vertical Post Supply, Fxing & Erection Of Built Up Canllever Structure 6 M Span Comprising Of One Verllcal Posts Of 6.00 I!4 Helght Made Up Of 300 Mm Nb Heavy Class Ms Pipe As Verllcal Member Welded With 10 Mm I\,4S Plate At Top & 12 Mm M S Plate At Bottom. The Horizontal Truss Shall Comprise Of 50 Mm Dia Heavy Class M.S. Pipe And 40 Mm Dia Heavy M S Pipe As Bracing & 10 Mm Ms Plate At Bottom For Llxing To Vertical Post As Per Structure Design & Drawing Wilh One Of Steel Primer And Two Coats Of Synthetic Enamel Planl. The Work Includes Constrlrction Of Reinforced Cement Concrete Foundation Of Size 0.90X0.90X1 50 M Of Required Depth As Per Site Conditlon For Built Up Structure Including Earlh Work In Excavation 100 Mm Thick Lean Concrete In 113:6 Cement Coarse Sand And 40 Mm Gauge Stone Ballast And Reinforced Cement Concrete M25 Grade Concrete Including Supply And Fixing Of 25 Mm Dia Foundalion Bolts 600 Mm Long As Per Provision Of Structure Design Includlng Cost Of Reinforcemenl & Shuttering. The Lateral Vertical Clearances And Complete. Nstallaton Work Shall Be As Per Relevanl Clauses Of Mort&H Speciflcation Section 8Oo And Irc 67 2012 Complete In All Respect The Raies Shall Include Cost Of Deslgn Fabricalion, Supply, Kansportalion, Local Shifting Erection Of Signage Skucture Using Crane, Inclusive Of All Taxes Etc. All T&P Machine, Malerial And Labour Requiled For Proper Completion Of Work As Per Direclion Of Engineer-Ln-Charge. , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilhout Shank) , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilh Shank) , Flexible Median Marksr As Per Irc 79:2019: Flexible Lmedian N4arker (Flv4nl) Should Be Used For Improving Medlan Visib Lity Dlrring Dark Hours. , Use Of L/Edian ]Varker Provides Safely Againsl Colision Happening Wilh Med Ans During N Ght Lime , Or Sevete Weather Flexib E L\.4Edian Markers Shall Be Provided With Fluorescenl Yellow Colour Retro-Refleci Ve Sheeting Type Xl As Per Irc:87. Flexible Lt4edian Lmarker Shall Be Ol Lough, High Impact Resistant, Lnieclion Molded, Lhermoplastic Body With Propery Of Flexibility Io Provide High Durabilityand U Shape Structure Having Rebound / Bollnce Back Properly. The Sheeting Shall Be Of Type Xl Conforming To Lrcl67 And Ii Should Be On Both The Faces Whereby Providing Maximum Refleclivity At L,Anger Distances With Adequate Durabllity. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Lnjection Molding Process. Fi\4M Shall Be Fixed By A Combination Bf Epoxy Adhesive And Grouting/ Drilling On Concrete Medians Or Property Conslructed Solid Medians Heighl: The Marker Height Shall Be A Minimum Of 180 Mm Width 120 Mm & Body Thickness: 6.5 Mm. The Shanks Shall Not Be Less Lhan 20 Mm And Depth Shall Not Be Less Than 30 Mm Reflective Area: Shall Not Be Less Than G0 Cm Square . Proof Of Lhe Same Report Shall Be Uploaded Which Quollng Lender. The Body Of Fn,4[,4 Shall Bounce Back To Ils Origlnal Position Of Afier 750 Number Of Hits Using Pendulum Of 1.8 Kg Conforming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmi\4 Shall With Stand 50 Kg I Tensile Loads Conforming To Astm D63b Method. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer-Ln-Charge. , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Over 10 Cm. In Width , Linear Dstinoator Systsm (Lds) Supply & Fixing Of Linear Delineator System (Lds) Panels Made Of Micro Prismatic Retro Reflective Sheeting Type Xl Duly Laminated On Thin Aluminium Foil To A Unique Corrugated Shape To Provide Retro Reflection Across Wide Range Of Observaiions And External Angles. Eatch Lds Panel Should Be Of Nominal Lenglh Of 33 Inch And Each Ridge Shall Be Approximately 0.34 Inch High Each Lds Panel Is To Be Firmly Fixed On Existing Concrete/Brick Work With 16 Nos Fastner/ Screw , Retro-Roflectivesheeting Type-Lv With 4 Mm Thick Acm Single Side Providing & Flxing Of Reflective Signs With A Corrosion Resistant 4 Mm Thick Wlth 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Lace To Be Iully Covered With Hlgh Lntenslty Prlsmatic Sheetlng Type Lv As Per Irc-6712012 Relro Refleclive Sheeling With Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Elc Shollld Be As Per Morth Speciflcation No Bo1.3.7 .The Sheelng Shall Have A Pressure - Sensltive Adhesive Of The Aggressive - Tack Type Requiring No Heat , Solvent Other Preparation For Adhesion 10 A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acim (Aluminium Composite Materials) Shall Be Flxed On The Back Frame Nis Angle Wiih Riveting. Micro Prismalic Type Lv Retro Rellective Sheeting Conilrming 1O Astm 04956-09 Shall Be Pressure Lixed. The Retro Reflective Sheeting Shall Be Tested For A Cerlillcate Of Having The Sheeting Tesled For Coetllcient Of Retro Refleclion, Dayume Colour And Luminance, Shrinkage, Flexibilily, Liner Iemoval, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed Lhese Lesls Shall Be Obtained From Lnlemational/Government Laboratory/ Lnstitute By The Manufacture. Of The Sheetng And In Case The Certiflcate Is Oblalned From International Condilion, T Should Also Be Obtained From Lndian Condilion Within 3 Years Of Launching Of Producl By The Manufactllre In Abroad. Alternalively, A Cerliilcate Conforming To Astm Specification (D 4956-09) On Artiilcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, Lhe Employer/Client, If So Desires, Could Seek For A Petlotrnance Guarantee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirement Of Lhree Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo.T Shall Be Uploaded Whlch Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Lransportation, Installation And Lncidentals All Complete As Per Direction Of The Eng Neer-In-Charge. , Retro-Reflectivesheeting Type Iv With 4 Mm Thjck Acm Double Side: Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Lhlck With 0.4 To 0.5 Mm Both Side Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Tntensity Prismaiic Sheeling Type Lv As Per Irc-67:2012 Retro Reflective Sheeting With Back Frame Ms Angle Of 35X35x5 Mm Legends Letters , Numerals And Borders Elc Should Be As Per Morth Specification No801.3.7 The Sheeting Shall Have A Pressure - Sensitive Adhesive Of The Aggressive - Tack Type Requiring No Heai, Solvent Olher Preparation For Adhesion To A Smooth Clean Surface, Ln A Manner Recommended By The Sheeling Manufacturer. The Acn,4 (Aluminium Cornposite L\,4Aterials) Shall Be Ilxed On The Back Frame Ms Angle With Nveling. Micro Prismatic Type Lv Retro Refleclive Sheeting Conflrming Io Astm D4956-09 Shall Be Pressure Llxed. The Reko Reflective Sheeling Shall Be Tesled For A Cedificate Of Having The Sheeting Tested For Coemcient Oi Reko Reflection, Daytime Colour And Luminance, Shrinkage Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdoor Weatherlng And Its Having Passed These Tests Shall Be Obtained From Lnternallonal/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeting And In Case The Certificale Is Oblained From International Condition It Should Also Be Obta Ned From Lndian Condilion Wilhin 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certilicate Conforming 10 Astm Speciflcatlon (0 4958-09) On Aatiflclal Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepled Provisionally. Ln Sllch A Situation, The Employer/Client If So Desires, Could Seek For A Performance Guarantee Which Would Be Released Afler Receipl Of Cerlillcate Meeting The Requirement Of Lhree Years Outdoor Weathering Of The Sheeling As Per Irc 67I2012 & Proof Of The Same Repofl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installalion And Incidentals All Cornplete As Per Dlreclion Of The Engineer-In-Charge , Retro-Refle.Ctivesheeting Type-Xl With 4 Mm Thick Acm Single Side Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Thick With 0.4 To 0.5 Mm Both Slde Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Lntensity Prismatlc Sheeting Type Lv As Pet Irc-67:2012 Reko Reflective Sheeling With Back Frame L\,4S Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per L\Lorth Specification No_ 801.3.7 The Sheeting Shal Have A Pressure - Sensitive Adhesive Of The Aggressive Tack Type Requiring No Heal Solvent Other Preparation For Adhesion To A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acm (Alllminium Composite L\,4Aterlals) Shall Be Fixed On The Back Frame Ms Angle With Riveting. Micro Prismatic Type Lv Retro Reflective Sheeung Conflrming To Astlvl D4956-09 Shall Be Pressure Fixed. The Relro Reflective Sheeting Shall Be Tested For A Cefiilicate Of Having The Sheeting Tested For Coeificient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Iungus Resistance. 3 Years Outdoor Weathering And Lts Having Passed These Tests Shall Be Obtained From Lnlernational/Government Laboraiory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cefiificate Ls Obtained From Lnternational Condition. It Should Also Be Oblalned From Lndian Condition Wilhin 3 Years Of Launching Of Producl By The Manufacture In Abroad. Alternatively, A Certificate Conforming To Astii Speciflcation (D 4S5b-09) On Adiflcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Prcvisionally. Ln Such A Siluation, The Employer/Client, If So Desires, Could Seek For A Performance Guaranlee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirernent Of Three Years Outdoor Weathering Of Lhe Sheeting As Per Irc 67:2012 & Prooi Of The Same Reporl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpoftalion, Installation And Incldentals All Complete As Per Direction Oi The Engineer-Ln-Charge , Retro-Reflectlveshoeting Type-Xl With 4 Mm Thick Acm Double Side Providing & Rlxing Of Reflective Signs With A Colrosion Resistanl 4 Mm Thick With 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Face Lo Be Iully Covered With High Lntensity Prismatic Sheeling Type Lv As Per Irc-67:2012 Relro Retlective Sheeting Wlth Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specification No_ Bo1.3.7 .The Sheeting Shall Have A Pressure - Sensilive Adhesive Of The Aggressive - Tack Type Requiring No Heat, Solvent Other Preparation For Adhesion Lo A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer, The Acn,4 (Aluminlum Composite Materlals) Shall Be Fixed On The Back Fiame Ms Angle With Riveting. Micro Prismalic Type Lv Retro Reflective Sheeting Conflrming To Astm D4956 09 Shall Be Pressure Fixed. The Relro Refleclive Sheeting Shall Be Tested For A Ce(Iilcate Of Having The Sheeting Tested For Coefllcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Funqus Resistance. 3 Years Outdoor Weathering And Its Having Passed These Tests Shal Be Oblained From Lnternationa /Governmenl Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case Lhe Certillcate Ls Obtained From Internalional Condition, It Should Also Be Obtained From Lndian Condition Within 3 Years Of Launching Of Product By The Manufacture In Abroad Alternalively, A Ce(Iilcate Conforming To Astm Specification (D 4956-09) On Artiflcial Accelerated Wealhering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Sltuation, The Employer/Cllent, If So Deslres Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cedillcate Meeling The Requirement Of Lhree Years Outdoor Weathering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo( Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpo.Tation, Installation And Incidentals All Complete As Per Direction Of The Engineer-In-Charge , Bollard (Single Sido) Supply & Fixing Of Bollard Made(Single Side) Out Of2mm Thick Aluminium Sheet Face Lo Be Covered With High Intensity Prismatic Grade Type Lv Sheeting , Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specillcation No-801.3.7 . Welded Poly Shaped To Make It Monolithic Pillar Size 12Oo Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Is Fully Cover (Size Of Foundation 0.45X0.45X0.60M) , Bollard (Doublo Side) Supply 8, Fixing Of Bollad Made (Double Side) Out Of 2Mm Thick Aluminium Sheet Face To Be Covered With High Intensity Prismatic Grade Iype Lv Sheeting Legends , Letters , Numerals And Borders Etc Should Be As Per Morih Specification No-801.3.7. Welded Poly Shaped To Make It Monolithic Pillar Size 1200 Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Ls Fully Cover. (Size Of Foundalion 0.45X0.45X0.60M) , Solar Power Road Marker (Solar Studs) The Solar Studs Shalt Be Made Of Aluminium Alloy And Poly Carbonate Material Which Shall Be Absolutely Weather Resistant And Strong Enough To Support A Load Of 13,635 Kg Tested In Accordance With Ast[4 D4280. Lts Co]Our May Be While . Red , Yellow , Green Or Blue Or Combination As Directed By The Engineer . Its Water Resislance Shall Meet Lhe Requiremenls Of Lp 65 In Accordance Wilh 15:12063:1987 Category 2 For Protection Againsl Water Ingress The Dimensions Of Solar Sluds Shall Not Be Less Than 100 Mm X 100 Mm X 10 Mm Ltshall Have Super Bright Leds So As To Provide Long Visibillty From A Distance Of More Than B0o M. Lts Flashing Rate Shall Not Be Less Than1 Hz Lts Should Be Able To Glve The Prescribed Performance In The Temperrature Range Of - 40C To +55C Lts Life Shall Be Not Less Than 3 Years. The Rate Shall Include All Materials, Labour, Equipments, Fabrication, Transportation, Erecuon, Installation And Incidentals All Complete As Per Direclion Of The Englneer-In-Charge , Cast-Ln-Situ Cement Concreto M 20 Kerb Construction Of Cement Concrete Kerb With Top And Bottom Width 115 And 165 Mm Respectively, 250 Mm High In M 20 Grade Plain Cement Concrete On M-10 Grade Foundation 150 Mm Thick, Foundation Having 50 Mm Projection Beyond Kerb Stone, Kerb Stone Laid With Kerb Laying Machine, Foundation Concrete Tad Manually, Alt Complete As Per Clause 408. , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 90 Cm Equllateral Tringle With Dif,Lnitation Plate Size (20Cm X 60Cm , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Eqlrilateral Trinqle With Difflnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Circular With Difflnltation Plale (20Cm X 60Cm) . , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government B0 Mm X 60 Mm Reclangu annual repair With Difllnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Mm X 45 Mm Rectangular With Difllnitation Plale (2Ocm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm X 60 Cm Square With Difflnitation Plate (20Cm X 60Crn) , Direction And Place Identification Signs Up To 0.90 Sqm Size Board Providing And Erecting Directlon And Place Identification Retro Reflectorised S Gn As Per Irc-67 Made Of High Intensily G.Ade Sheeting The Relro Reflective Sheelng Shall Be Tested For A Certiicate Of Having The Sheeling Tested For Coefficient Of Reko Reflection. Daytime Colour And Luminance, Shrinkage, Flexibllity. Liner Removal Adhesion, Impacl Resislance, Specula. Gloss And Iungus Resistance, 3 Years Ouldoor Weathering And Its Having Passed These Tesls Shall Be Obtalned From Lnternational/Govemment Laboraiory/ Lnslitule By The Manufacturer Of The Sheeting And In Case The Certillcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condltion Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certiflcate Confonning To Ast[4 Specification (D4956 09) On Art Ficial Ccelerated Wealhering Requirements Faom A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer I Client, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Lhree Years Olrtdoor Weathering Of Lhe Sheeting As Per Irc 67 2012. Legends , Letters , Nurrerals And Borders Etc Should Be As Per Imorth Speciilcation No-801.3.7 Sheet Fixed Over Aluminium Sheetinq .2 Mm Thick Wilh Area Not Exceeding 0.9 Sqm.Supported On A Mild Steel Single Angle Iron Post 75X75x6 Mm Flrmly Fixed Lo The Ground By Rneans Of Property Designed Foundalion With N,4-15 Grade Cement Concrete 45X45x60 Cm.,Below Ground Lcvcl As Pcr Approvcd D.Awing. Complete. , Tree Plats Supply & Fixing Of Retro Reflective Tree Plate Having Size 15Cm X15cm, Conjisiing Type Xl Retro Reflective Sheeting Lixed Over 1.50 Mm Thick Aluminiu; Sh;Et Including Labour, Material T&P Etc For Proper Completion Of The Work. The Rate Shall Include All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 1000 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 750 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 500 Mm Helght , Aluminum-Backed Flexible Prismatic Sheeting Shall Be Made Of Yellow Colored Flexible Prismallc Sheeting With Non-Rnetallic Prismatc Lens Formed In A Lransparent, Synthelic Resin As Retro Leflective Elements. This Llexible Prlsmatic Sheeting Shall Have Black And Yellow Stripes With Aluminum Backed Flexible Prismatic Type Vl Sheeting Conforming To Astm: D4956 . Specifications And Standards Of Coefllcient Of Relro Refleclivity, Flexibility And Lmpact Resislance Applicable For Reboundable Devices This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Colour In A Continuous Roll Format. Wldlh Of Object Marker Shall Be 300 Mm. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer In-Charge , 2.40 M Span Over Head Cantilever Structure With 150 Die Ms One Vertical Post (Double Side Retro Reflective Sign Boards) Supply, Fixing & Eraction Of Built Up Cantilever Structure 240 M Span O.PiiIng Oi One Ve.Tical Posts Of 7 30 N4 Heighl Made Up Of 150 Mm Nb Medium Class T\4S Pipe As Vertical Memberwelded With 10 Mm Ms Plate At Top & Lo Mm Lvls Plate At Boltom. Flxing To Vertical Post As Per Structllre Design & Drawing Wiih One Of Steel Primer And Two Coats Of Synthetic Enamel Plant And The R;Tro Reflective Sheetinq Shall Be Tesled For A Certifcale Of Having The Sheeting Tested Fo. Coemcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Olltdoor Wealhering And Ils Having Passed These Lests Shall Be Obtained From Lnternational/Government Laboraiory/ Lnstitute By The Manufactllrer Of The Sheeting And In Case The Certificate Is Obtained From Internatlonal Condilion, It Should Also Be Obtained From Lndian Condition Wilhin 3 Years Of Launchlng Of Product By The Manufacture In Abroad. Alternatively, A Cedificate Confonning Io Astm Speciflcation (0 4956 09) On Artificial Accelerated Weathering Reqllirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. N Such A Sltuation, The Employer / Client, If So Desiaes. Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerllllcate Meeting The Requirement Of Three Years Outdoor Weathering Ol Lne Sheeling As Pel Irc 67 2012 . Legenos . ,Etters . Numerdls And Borders Elc Sholllo Be Asperl\,4Orlh Specif,Calion No_801 37 The Work Includes Construction Of Reinforced Cement Concrete Foundation Of Size 0.60X0.60X1.20 M Of Required Depth As Per Site Condilion For Built Up Struclure Lncluding Earth Work In Excavation 100 Mm Thick Lean Concrete Ln 1:3:6 Cemenl Coarse Sand And 40 Mm Gauge Stone Ballast. Reinforced Cement Concrete Lm25 Includlng Supply And Fixing Of 25 Mm Dla Foundalion Bolts 600 Mm Long As Per Provision Of Slructure Design Including Cost Ot Reinforcement & Shuttering. The Lateral Vertical Clearances And Complete. Lnstallation Work Shall Be As Per Relevant Clauses Of Mort&H Specitlcation Seclion 800 And Irc 67 2012 Complete In A I Respect The Rates Shall Inclucle Cosl Ol Design Fabrication, Supply, Lransporlalion, Local Shifling Erection Of Signage Slructure Using Crane, Incluslve Of All Taxes Etc All T&P Machine, Material And Labout Required For Proper Completion Of Work As Per Direction Of Engineer-In-Charge , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 30X90 Cm (Lefrright) Object Hazard , Retro Rellectorisod Signs (Stajnless Steel Frame And Post With One Side Sings) Supply & Fixing Of Reflective Sign Board (Single Side) Of Size 1.50X1.20 M Retro Refleclive Sheeling Of Hip Grade Type-Lv, Lhe Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick, Acm Sheel Of Standard Make As Per Morth Specificaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Cm Cement Conclete Foundauon. The Stainless Steeljoint Welding Of Ss Pipe Work Shall Be Band And Grinder Property Including Bufflng So An To Give Uniiorm Shining At Weded Joinls. The Retro Reflective Sheellng Shall Be Lested For A Certiflcate Of Having Ihe Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Cololrr And Luminance, Shrinkage, Flexibility, Linet Removal, Adheslon, Impact Resistance, Specular Qloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Governmenl Laboratory/ Institute By Lhe Manufacturer Of The Sheeting And Ln Case The Cedillcate Is Obtained From Inlernational Condition, It Should Also Be Oblained From Lndian Condition Within 3 Years Of Launching Of Procluct By The Manufacture In Abroad Allernatively. A Certiflcate Confolrnlng To Astm Specilicalion (D 4956-09) On Artiflcial Acceleraled Weathenng Requirements From A Reputed Laboratory Ln Lndia Can Be Accepled Provislonally. Ln Slrch A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificale Meeting The Requirement Of Three Years Ouldoor Weathering Of The Sheeting As Per Irc 67I2012. Legends , Letters , Numerals And Borders Elc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Governmenl Repod Shall Be Uploaded While Quoting Tender. , Retro Reflectorised Signs (Stainless Steel Frame And Post With Both Side Sings) Slrpply & Fixing Of Reflecllve Sign Board (Sing E Side) Of Size 1.50X1.20 M Retro Reflective Sheeting Of Hip Grade Type-Lv, The Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick Acni Sheet Of Standard Make As Per Morth Speciilcaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Crn Cement Concrele Foundation The Stainless Steelioint Welding Of Ss Pipe Work Shallbe Band And Grinder Propefiy Including Butting So An To Give Uniform Shining At Weded Joints. The Relro Reflective Sheeting Sha I Be Tested For A Certificale Of Having The Sheeling Tested For Coefficient Of Retro Reflection Daytime Colour And Luminance, Shrinkage. Flexibiity, Llner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Reslstance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeling And Ln Case The Certiflcate Is Obtained Lrom Lnternational Condition, It Should Also Be Obtained From Lndian Condition Wlthin 3 Years Of Launching Of Product By The Manufacture In Abroad. Allernatively, A Cerlificate Conforming To Astm Specificalion (0 4956.09) On Artificial Accelerated Weathering Requlremenls From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificate Meeting The Requirement Of Three Years Outdoor Weather Ng Of The Sheeting As Per Irc 67I2012. Legends. Letters, Numerals And Borders Etc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Government Report Shall Be Uploaded Whlle Quoting Lender. , Type - A, W : Metal Beam Crash Barrier Providing And Erecting A W Metal Beam Crash Barrler Comprlsing Of 3 Mm Lhick Coffugated Sheet Melal Beam Ral 70 Cm Above Road/Ground Level Flxed On Ismc Series Channel Vertical Posl, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High. 1.1 M Below Grolnd/Road Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fltlings To Conform To Lsi1367 And 15:1364. Metal Beam Rail To Be Fixed On The Vedical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810 , Type - B, Thrie : Metal Beam Crash Barrier Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Melal Beam Rail,85 Cm Above Road/Ground Level, Fixed On Isi\Ic Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Cenlre To Cenke, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fittings To Conform Lo Lsl1367 And Ls:1364 Metal Beam Rail 10 Be Fixed On The Verlical Post With A Space Of Channel Seclion 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810 , Anti-Termite Treatment The Soil Along With External Perimeter Of Building At The Rate Of 2.5 Litres Of Emulsion Per Square Metre Of The Perimeter Wall {Chapter No.08 Si.No.5} , Anti-Termite Treatment Of The Bottom And Sides Of Excavation At The Rate Of 5Litres Of Emulsion Per Square Metre Of Surface Area {Chapter No.08 Si.No.1} , Anti-Termite Treatment Of The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface{Chapter No.08 Si.No.3} , Anti-Termite Treatment Of The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface {Chapter No.08 Si.No.4} , Anti-Termite Treatment Of The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) {Chapter No.08 Si.No.2} , Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To The Full Depth Of The Hole : With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration {Chapter No.08 Si.No.6-2.35.4.1} , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration {Chapter No.08 Si.No.6-2.35.3.1} , Providing And Stacking 22.40-53Mm Guage Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Etc All Complete.(Ns) , Supply And Laying Stone Dust Etc All Complete. , Consolidation/Compaction Of Stone Ballast 10Cm Thick (Loose) Coat Including Repairing Of Patches Picking Up To Old Surface Spreading, Ballast Making Medhies To Retain Water And Carriage Of Metal Upto 30M Carriage Of Water Upto 200M Maintenance Of Barriers And All Labour T&P Including Road Roller Charges Etc. Required For Proper Completion Of Work The Stone Ballast Is To Be Supplied To The Contractor Free Of Cost At Site. , Scarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} , Providing And Applying Primer Coat With Ss1 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. (As Per Attached Analysis) , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , Providing & Applying Tack Coat With Bitumen Vg-10 Using Bitumen Pressure Distributor At The Rate Of 0.30Kg/Sqm. On The Prepared Primed Granular/Old Painted Surface. Cleaned With Air Compressor. Including All Taxes, Material, Labour, T&P Etc Required For Proper Completion Of The Work. (For Bituminous Surface). (Chapter No.20 Si No.9) , Providing And Laying Bituminous Concrete (Grading-Ii) With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 As Per Approved Job Mix Formula Which Ever Is Higher Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification 5Th Revision Clause No. 509 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , S/L/J Of 20Mm Dia Pvc Cunduct Pipe Etc. All Complete. , Making Of Nala Bandha With Sand Bags. With Local Sand Including Etc. All Complete. (Atached Per Annalysis Rate). , Providing Of Nala Bandha For Diversion Of Nala Etc All Complete.(Ns) , Scraping Of Max Phalt Road Including Disposal Of All Scraped Material To A Distance Of 30Mtrs (100 Ft) As Directed By Engineer-In-Charge C.P. & T&P.Etc. All Complete. {Chapter No.20 Si No. 772(A)} , Dismentling Existing Damage Plaster Including Disposal Of Refuse As Directed By E/Ic With In A Distance Of 60 Meters Etc. All Complete. {Chapter No. 17 S.I. No.16 (706)} , Supply And Fixing Of Light Fitting Switch Board. (None Sheduled) , Fixing Of Gate, Grill And Jali Etc. All Complete. (None Scheduled) , Supply & Fixing Of Wiring Sub Main. , Supply & Fixing Of Plug Point 15Mm. , Supply And Fixing Oxided Iron Fitting Etc. All Complete (None Scheduled) , Supply/Fixing Of 16 Mm Pvc Pipe Adopter Suitable For Item No. , Supply/Fixing Of 20 Mm Cvc Pipe Adopter Suitable For Item No. , Supply & Fixing Of 27Watt. Cfl Etc. All Complete. , Supply And Fixing Cat Eye Including Supply Of All Material, Loabour, T&P Etc. All Complete. (Chapter No.28 Si.No.5B) , Supply And Fixing Wiring Of Light Point. (None Sheduled) , Making Connection Of Drain Of Sewer Line With Existing Man Hole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Cement Plastered On Both Side With Cement Mortar 1:3 Finished With A Floating Coat Of Neat Cement And Making Necessary Channels With Cement Concrete 1:2:4 For The Drain Etc. All Complete. (Chapter No.25 Si.No.9) , Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Stone Of Size 20 Mm Nominal Size) Laid In One Layer Finished With A Floating Coat Of Neat Cement (40 Mm Thick Floor). (Si No. 665), Nbo 14.71) , Providing And Fixing Of Foot Steps Etc All Complete. (Ns) On Market Rate , Providlng And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Ls:8931.15 Mm Nominal Bore , Supply & Fixing Of C.P. Brass Stop Cock (Conceled) Of Standerd Design Of Approve Quality Etc. All Complete. (Chapter No.21 Si.No.44) , Providing And Fixing Close Timbering In Trenches On Both Side & All Complete. (A) 0.00 To 3.00 M. (None Scheduled) , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Ls:8931..15 Mm Nominal Bore , Fixing Window Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Ls Standards And Weighing Not Less Than 690 Qms.15 Mm Nominal Bore , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 75Mm Diameter. (Chapter No.23 Si.No. 32(Ii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 110Mm Diameter. (Chapter No.23 Si.No. 32(Iii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 140Mm Diameter. (Chapter No.23 Si.No. 32(Iv)) , Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame. (Chapter No.22 Si.No.77) , Making Ornamental 2D Painting With Special Design Make By Specialist Painter Laying Of Two Coat Birla White Putty And Design By Asian Paint Including All Material Etc. All Complete. (Nn Approved) , Providing Of 8Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Fixing Door Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Supply And Fixing 6Mm (1/4) Thick Chine White Glazed Tiles In Flooring Or Dado Laid With 1:3 Cement And Approved Coarse Sand Mortar And Approved Coarse Sand Mortar Finished With White Cement Jointed And Polishing Complete Including Supply Of All Materials, Labor For Porper Completion Of The Work. (Chapter No.14 S.I. No. 628) , Supply & Fixing Of Pre-Cast M-30 Cement Concrete Grass Paver (Rubber Molded Coloured) Over 40Mm Thick Local Sand Bed, With 3Mm Thick Joints Filled With Local Sand Including Leveling, Tempering And Sweeping Etc., Interlocking Bricks Will Be As Description Given In Direction Issued By The Ircsc-03-2004 And Should Be Isi Marked All Complete. 80Mm Thick, Strength Should Not Less Than M-30. (Tiles I Shape Decided By Engineer-In-Charge With Isi Mark) {Chapter No.20 Si.No.17F) , Repairing Of Leakage And Damege Pipe Line Etc All Complete.(Ns) , Lettering & Painting Of Wall Etc. All Complete. , Red Sand Stone Work For Wall Lining Etc. (Veneer Work) 30Mm Thick In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Camping Jointing In White Cemnet Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching Complete. (Chapter No.18 Si.No.1 New) , Providing And Fixing White Vitreous China Wash Basin Size 630X450mm With Pair Of 15Mm C.P. Brass Pillar Taps Including Etc. All Complete. (Chapter No.24 S.I. No. 3(A)) , Cleaning Of The Site For Workable Etc. All Complete. (Non Scheduled) , Providing Of 32Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 1200X600x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 600X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x100mm Etc All Complete. (As Per Market Rate) , Fixing Of Reinforced Cement Concrete Slab Etc All Complete. (Ns) , Raising & Re-Fixing Of Manhole Including All Material Labor T&P Etc. All Complete. (Non Scheduled) , Supply & Fixing Reinforced Cement Concrete Menhole Cover Heavy Duty Size Etc. All Complete. (Non Scheduled) , Providing Laying Spreeding And Compacting 45-90Mm Stone Agreegate For W.M.M. Specification Etc. All Complete. (None Scheduled) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing Of 3D Ornamental Wall Art Painting By Architect & Special Painter Including Scrapping Of Wall And Two Coat White Putting White Putty One Coat Primer All Labour Scaffolding Work & Labour T&P Etc. Painting By Asian Special Paint Etc. All Complete. (Rate Mr As Smart City, Agra) , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam (22.40-53Mm) Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel/ Vibratory Roller In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density. , Providing & Laying 5Cm. Thick B.M. Laying By Paver Finisher Bitumen Of The @3.4%Kg By Weight And Stone Grit Etc. All Complete. (20-Chapter Analysis Rate) , Providing & Laying 2.5Cm. Thick S.D.B.C. Laying By Paver Finisher Bitumen Of The 5% By Weight Etc. All Complete. (20-Chapter Analysis Rate) , Supply & Fixing M/S Iron Work Display Board Including Painting, Lettering Etc. All Complete. (None Schedule) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.4A) , Supply And Fixing Of Precast Reinforced Reinforced Cement Concrete Benches (Pfrc) Ornamental Benches With 02 Year Warranty Etc All Complete. (None Scheduled) , S/L/F Supply Of 1000Mm Dia Np-3 Reinforced Cement Concrete Hume Pipe In Proper Position As Directed By E/I Including Catage Of Pipes Collars Upto 30M Distance Etc All Complete. (Chapter No.1 Si.No.31(E) ) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 In Reinforced Cement Concrete Slab Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Binding The Same With 24 Bwgi Binding Wire And Including Necessary Centring And Shuttering Etc. And Also Including Supply Of All Materials Labor And Tools And Plants Etc. Required For Proper Completion Of The Work. Strength Of The Concrete Shall Not Be Less Than M-150. (5-Chapter S.I. No.-284) , Supply & Fixing Granite Stone Work Display Board (Size 2.50Ft X 4.00Ft) Including Painting, Lettering Etc. All Complete. (None Schedule) , Installation Of 1.50 H.P. Isi Marked Sumbercible Pump Etc All Complete. (Attache As Per Santion Annalysis) , Cost Of Septik Tank Attache As Per Estimate & Details. , Plain Glass Best Quality, Cut To Size 5Mm Thick , Providing And Fixing Designer Dustbin (Market As Per Catlog Code No. Db-03). , Supply Of Planting Of Trees Amaltas, Jaarul, Arjun Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 110Mm Is:4984:2016 (As Per Market Rate) , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 160Mm Is:4984:2016 (As Per Market Rate) , Supply & Fixing Of Pre-Cast Reinforced Cement Concrete Drain Cover Different Size Etc All Complete. , Supply And Sowing Of Grass In Park Including One Year Mantinance Etc. All Complete. (None Scheduled) , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 8 Km Lead Complete (Earth Measure Dinstacks Will Be Reduced By 20% For Payment) .(Dar 2020 Hort-Basic Rates 2.2) Based , Supply And Fixing Of Light, Fitting Switch Board. (None Sheduled) , Supply And Fixing Of Chest Press Double. , Supply And Fixing Of Leg Press Double. , Supply And Fixing Of Triple Twister. , Supply And Fixing Of Shoulder Builder Double. , Supply And Fixing Of Air Walker. , Supply And Fixing Of Doublebar. , Supply And Fixing Of Rower. , Supply And Fixing Of Horse Rider. , Supply And Fixing Of Plastic Side With Iron Ladder 12 Feet Length. , Supply And Fixing Of See Saw Double Board Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Sliding With Swing Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Slide Ground Level Mgr Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Snack Climber Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Slide Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Nursery Combo Set Revolving Jhoola Etc All Complete. (None Scheduled) , Providing And Fixing Of Stainless Steel Water Cooler 4 Tap Etc. All Complete. (None Schedule) , Supply And Fixing Bansi Paharpur (Red/White) Bharra Sand Stone Fully Moulded, Engraved, Carved With Polishing And Dressing Including Clamp And Fashners Of Pillar Set With All Complete Work Etc. (None Schedule) , Supply & Fixing Of Rubber Moulded Cement Concrete Kerb Stone (Double Tapper) M-20 With Labour T&P Etc All Complete. , Supply And Installation And Jointing Of 500Mmx500mm Epdm Rubber Mat Flooring Of Thickness 24Mm Puling All Labour Material T&P Etc. All Complete (Rate As Per Jhs Jscl Mr). , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm/230Mm/300Mm Thick Aac Blocks In Super Structure Above Plinth Level Up T Floor Five Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Separately). , Providing And Fixing Of Barricading Of 100Mm Average Ballies With In A Distance Of 1.50 Meter For 3 Rows Of 3Q. 3 Nosof Cross Ballies, Two Supporting Ballies Of 3 Meter Ballies And 2 Nos Perpendicular Ballies Tie With Moonj Rope Including Supply Of All Material Such As Ballies Rope T&P Required For Proper Completion Of Work And Also Including Labour Component (Material Will Be Property Of Contractor After Dismantling). , Providing & Fixing Of Green/White Shade Multipurpose Net/Cotton Cloth Proper Completion Of Work Etc All Complete. (Ns) , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Supply And Fixing Of Ward Up Big As Per Attach Photograph & Analysis. , Supply And Fixing Of Ward Up Small As Per Attach Photograph & Analysis. , Supply And Fixing And Installation Of See Saw Double Board Jhoola Isi Marked As Per Direction Of Engineer-In-Charge Etc. All Complete As Per Attach Photograph & Analysis. , Supply And Fixing Of Cast Iron Banches As Per Attach Photograph And Analysis And Direction Of Engineer-Incharge Etc. All Complete. , Complete De-Silting And Cleaning Of All Types Of Sewer Lines By Using Super Suction Machine And Taking Out Of Cebris/Silt Etc Including Safe Disposal Of Silt As Directed By The Deptt. Including Cost Of All Consumble Likes Disel Oil, Water Ret Provision Of Diversion Of Line If Required With The Help Of Sewage Pumps, Poser Backup From Gene Sets For Running Of Pumps. Night Lighting Etc Barricades Display Of Entire Operation Along With Sadequate Safely Equipments Must Be Used By Sewer Workers Size Fo Sewer Line To Be Desilted As Detail Above 1000Mm Dia. , providing and laying Gsb With Graded Stone Ballast With Stone Grit Size Stone Ballast With Hand Ramming Watering Including All Material Labor T&P Etc.All Complete (Ns) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing & Laying Of Polythene Etc. All Complete. , Supply & Fixing Of Factory Wired Intergal Led Flood Light Luminaries With Die Cast Aluminum Housing Built With Driver Set Suitable For 140W. To 150W. Confirming To Ip 65 Protection Complete In All Respect. Cat Aaa ( S.I No. 1454 Pwd Schedule 2018) , Providing, Laying, Spreading And Compacting Stone Aggregates 45-63Mm Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Ro Ling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screen Ing/Bindin G Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. (Labour , A Pre-Laminated Sheet, Often Referred To As A Prelam Sheet, Is An Engineered Myka Wood Work Product Where A Decorative Layer, Like Laminate Or Veneer, Is Pre-Attached To A Core Material Like Particleboard Or Mdf. These Sheets Offer A Durable And Aesthetically Pleasing Surface For Furniture, Interior Design, And Construction.(None Scheduled) , Same Is Ltme No-1 & Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured) , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration (Chapter No.8 Sr.No.6.1) , Supply And Fixing Of Advertisement Sign Board Size 4X3 As Per Direction Of Engineer-In-Charge Etc. All Complete , Supply Of Planting Of Trees Washington Palm, Amaltas, Cycus Revoluta, Ficus Benjamina Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Providing Of Rain Water Harvesting Drawing And Analysis Etc. All Complete (Details Attached). , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Drilling Of 200Mm Dia T/W Bore Suitable For 110Mm Dia Pipe All Complete With Labour T/P As Per Direction Of Engineer-In-Charge. , Suppply And Lowering Of 110Mm Dia 6 Kg/Cm2 Pvc Pipe (Phenolex Or Apb By E/I) All Complete. (Isi Marked Only) , Supply And Pouring Of Pea Gravel Suitable For T/W Bore All Complete. As Per Direction Of E/I (If Required) , S/L Of 1.50 H.P. Submersible Pump Set 65 Mt Head. (Pluga, Crompton, Ksb Etc.) I.S.I. Marked Etc All Complte. (Water Filled Only) , Supply & Fixing Of 100Mm Pvc Pipe Adopter Suitable For Item No.2 , S/L Of 1.50 H.P. Submersible Motor Controlled Starter Pannel All Complete. Crompton Make. (I.S.I. Marked Only) , Supply/Fixing Of 25Mm Gate Valve All Complete. Approved Make. , Supply/Fixing 4Sq.Mm 3 Core Copper Cable All Complete. , S/L Of 40Mm Dia Red Screen Ashirbad Pvc Pipe All Complete. , Supply/Fixing Of M.S. Clamp Made With 65X6mm X600mm Long M.S. Streep Suitable For 110Mm Dia Pvc Pipe For Holding All Complete. , Supply/Fixing Of 40Mm Dia G.I. Pipe B-Class Complete With Labour Charge. (Including All G.I. Fitting) , Supply & Fixing Of 25Mm Cpvc Etc. All Complete. , Development Of Bore Till The Discharge Is Free From Turbidity Of Compression Including Labour, Required For Proper Completion Of Work. , Supply And Fixing Of Precast Readymade Boundry Wall Hieght 8 Feet Etc All Complete. (As Market Rate) , Useable Brick (A) Class M-L50 , Useable Brick (B) Class M-100 , Useable Brick(C ) Straiqht Over Brunt , (D) Tiles, Bull Nose Drip Course Brick , Brick Ballast (A) Brick Ballast 40Mm Qauge , Brick Ballast (B) Class-150 Brick Ballast 25Mm Gauge , Brick Ballast (C ) Brick - Bats Of O.B.B./150 Bb , Fiy Ash Brick (Specification/Strength Should Not Be Less Than Bricks - M-{50) 230Mmx1 10Mmx75mm , Aac Block Autoclaved Aerated Concrete Block (Aac Block) Conforming To Ls : 2185 - 2005 (Part-3) Including Loading, Cartage Upto Site, Unloading, Stacking And Including All Levies And Royalties If Any But Excludinq G.S.T , Stone Ballast (Khera Thakur Quarry Bharatpur Rajsthan) 45-90 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 45-63 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 22.4-53 Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 20Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 19Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) Crushed Stone Dust 2.36Mm & Below , Stone Dust , 13.20Mm Guage , 11.20Mm Guage , 6.7Mm Guage And Below , Stone Boulder (From Khera Thakur Quarry) (A) 25-40 Kq , Stone Boulder (From Khera Thakur Quarry) (B) 40-60 Kq , Stone Boulder (From Khera Thakur Quarry) (C) Stone Bricks Dressed , Grit {District Gwalior(Mp) Quarry}(Berja,Chandrapura, Turak Pura,Parsen,Sumerpada Padampur Kheria, Bhileti & Bilara) District Bhind (M.P.)(Pali, Dirman & Piparsana) , (A) 45-63 Mm Guage Stone Ballast. , (B) 22.4-53 Mm Guage Stone Ballast. , (C) 20-40 Mm Guage Stone Ballast. , (D) 20 Mm Guage Stone Ballast. , (E) 19 Mm Guage Stone Ballast. , (F) 16 Mm Guage Stone Ballast. , (G) 13.20 Mm Guage Stone Ballast. , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured Rubber Moulded , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 (Plain) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 16 X6 (Designer) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 18 X6 , Coarse Sand (Excluding Actual Bulkaqe) , Fine Sand (Excludinq Actual Bulkaqe) , (L) Local Sand , Cement (L) Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C , Cement (Ll) Cement (P.P.C.) , Cement (Lll) White Cement (J.K. Or Birla Brand) , Green Net(Chapter- 1 Sl.No 44) , Tractor Trolley With Driver Including P.O.L. (Chapter-2 Sl.No 25)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 142
Uttar Pradesh View Result →
6.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
7.
Defence #11281747 Technical Bid
Tender For Provision Of Defi Md Accommodation At Kota Mil Stn; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 4 Lump sum price worked out by the contractor for ROAD, PATH, CULVERT AND HARD STANDINGas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 5 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 7 Lump sum price worked out by the contractor for FENCINGas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 8 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 9 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 10 Lump sum price worked out by the contractor for LIGHTING PROTECTION as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 11 Lump sum price worked out by the contractor for FIRE FIGHTINGas listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 12 Lump sum price worked out by the contractor for LIFT WORKas listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 13 Lump sum price worked out by the contractor for HOT WATER SUPPLYas listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 14 Lump sum price worked out by the contractor for DG SETSas listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 15 Lump sum price worked out by the contractor for SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORKas listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 16 Sch A Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes:(i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XVSITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORK schedule). 17 INTERNAL WATER SUPPLYS&F for 15mm dia sink mixer (wall mounted) with 150mm long swivel spout,connecting legs and wall flangerswith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2014511 / Hindware Cat Part No F690058 / Parryware Cat Part No G3335A1 or equivalent make as mentioned in Appx B. 18 S&F for 15mm dia single lever center hole basin mixerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F1015451 / Hindware Cat Part No F690012 / Parryware Cat Part No G4863A1 or equivalent make as mentioned in Appx B. 19 S&F for 15mm dia wall mixture with bend pipe for overhead showerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2002401 / Hindware Cat Part No F330020 / Parryware Cat Part No G3316A1 or equivalent make as mentioned in Appx B. 20 INTERNAL ELECTRIFICATIONS&F ofmodular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005as specified in IS 732: 2019 etc complete all as specified and directed 21 S&F for modular type 1 module RJ-11 telephone socket with shutter etc complete all as specified and directed 22 S&F for modular type 1 module co-axial type TV socket etc complete all as specified and directed 23 S & F for 16 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 24 S & F for 25 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 25 S & F for 32 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 26 S & F for 40 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 27 S&F forSingle Phase Dual Source Pre Paid Meter, Class 1.0, RS485,10/60A Direct,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 28 S&F forThree Phase Dual Source Pre Paid Meter, Class 1.0, RS485, 5A CT operated,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 29 S&F of Sheet metal enclosure distribution board VTPN4 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 30 S&F of Sheet metal enclosure distribution board VTPN6 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 31 S&F of 160A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply etc complete all as specified and directed by engineer-in-charge. 32 S&F for 12W LED Downlight having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed . 33 S&F for LED light fitting with high 10 watt 220 V AC decorative wall type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed . 34 S&F for 10W LED bulk head light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed. 35 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 600 mm sweep. Min air delivery 115 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directed by engineer-in-charge. 36 Supply and fix Wall Mounting Fan, steel body AC single Phase, 230V,With Sweep Size, 200mm ; Motor Speed 84CMM, 3 blades, and frame and louvers etc complete all as specified and directed by engineer-in-charge. 37 Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type BUILDING PANEL (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge.The BUILDING PANEL shall comprise of the following:(A) Bus bar Chamber(i) 01 Set (3L + N) of copper busbar of rated capacity 400A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connections. 38 (B) Incoming:- (i)320A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 No.(ii) Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 No.(iii) LED phase indicators (Red, Yellow, Blue)- 01 Set 39 (C) Outgoing:-(i)40A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, havingtrip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 08 Nos(ii) LED phase indicators (Red, Yellow, Blue)- 08 Sets 40 SEWAGE DISPOSALS&F for DWCPE (SN8) 180mm outer dia and 163 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8)with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 41 S&F for DWCPE (SN8) 200mm outer dia and 175 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 42 S&F for DWCPE (SN8) 300mm outer dia and 260 inner dia of pipe for depth 1.65mm to 2.3m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 43 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-7 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 44 S&F forNonclog submersible (sewage disposal), pump set, electric driven 415 Volts 3 Phase 50 Hz, supply comprising of pump with cast iron impellors, submersible motor of suitable capacity, coupling, at discharge 3360 to 480 LPM and minimum discharge should be less than 480 LPM at minimum head 14 m.including chain pully block of two MT capacity 01 Noandsuitable arrangement for hanging the motor through chain of requirement of delivery of pump connected to main pipe line by suitabe HDPE pipe of size 150mm Dia for required length with necessary connection etc all as specified and as directed. 45 Supply,installing, testingand commissioningout door type LT feeder piller box of suitable size 750X750X450 mm, pedestal mounted, CPRI type test totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and paintedto both internal and External surfaces with powder coating paint in heatprocess of sheet and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and includingfollowing accessories and mounted on PCC Platform made out of100 mm thick PCC (1:3:6),0.45 Mtr all round the panel board etc complete with the following items :- 46 Incoming:- (i) Copper bus bar made up of copper strip100 amps duly mounted on bakelite insulatorssleevings of standard colour code - 01 Set. (04 No strips for Phases & Neutral)(ii) MCCB TPN 415 Volts,63 Amps, 50 Hz, breaking capacity 25 KA with fixed thermal & magnetic setting ( For Incomming ) - 01 No.Outgoing:-(i) MCB TP 415 volts 32 Amps, breaking capacity 16 KA with fixed thermal & magnetic setting ( For FPB2 ) - 03 Nos(2 nos for pump 1 nos for spare). (ii) FASD Starter for 15 HP Motor with single phase preventer, OLP and dry run protector- 02 Nos 47 (iii) Analogue type modular volt meterof range 0-500 volts -01 No(iv)Volt meter selector switch-01 No.(v) Analogue typeAmmeter of range 0-200 Amp-01 No(vi) Ammeter selector switch-01 No(set of three)(vii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (Red, Orange, Blue) - 01 set(viii) CT 200/5 Amps - 3 Nos 48 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 49 S&F forPVC insulated and sheathed 1100 volts grade flat type submersible 06 sqmm cable three core multi stranded conductor etc complete all as specified and directed . 50 M&L for Making drill hole by trenchless technologyof suitable size under road for laying pipe line of size150mm bore at 1 metre depth from the road level etc complete all as specified and directed.Note :- Drill hole (trenchless) shall be done without disturbing top surfaces of road by appropriate machine. 51 M&L for steel gate 5.45 m wide and 2.70 m height with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 52 EXTERNAL WATER SUPPLY Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 100mm bore class K-9 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 53 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-9 IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 54 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 55 Supply and fix CI foot valve with leather washer, ofsize 100 mm , lift and swing, single door, IS 4038 marked one with each pump suction line complete all as specified and directed. 56 M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primerfor the size of chamber 1200 mm x 1200 mm x 1200 mm (internal dimention) complete all as specified and directed. 57 Supply, install,commissioning and testing of Horizontal split case cetrifugal pump set 1450 RPM having an output of minimum 1100 LPM at a head of 45 mtr coupled to 3 phase 415 volt squirel case induction motor of adequate capacity complete all as ditected by Engr-in-charge with and including following :-(a) Necessary cable for interconnection between starter panel & pump set with 1100 volt rated copperinsulated unarmoured cable of minium 10 sqmm 3 core cable(b) Single phase preventer (current sensing type)(c) Necessary light grade GI pipe protection for cabling from pump set to LT panel.(d) Bourden pressure gauge.(e) MS pipe flanged type class B of size 100 mm bore upto foot valve from suction end of pump.(f) PCC foundation in type B-2, 1:2:4 using 20mm graded aggregate, 20cm above ground level and 30cm below grond level including grouting of eye bolts nut etc. for pump set of adequate size or as per manufacturers recommendations.Note: All other items/material requiredfor fixing pumpset shall be included in cost quoted.(ii) Foundation drawing shall be approved by GE/ Eng-In- Charge before fixing the pump set. 58 Supply, installations, testing and commissioning of factory made LT Indoor cubical typepanel boardhaving 150 Amp rated copper bus bar with neoprene rubber gasket and locking arrangement, dust,weather and verminproof , free standing, floor mounting type self ventilation with wire mesh,totally enclosed busbar chamber fully comparted type, front openable hinged independent door for each compartment with locking arrangement and common openable hinged door from rear side of suitable size made out of 2mm thick CRCA sheet duly painted with seven tank process,415 V,TPN,50Hz both side properly welded MS angular supported with chanel frame of size 50mm,at all vertical corner grouted in PCC 1:3:6 (Type-C1 using 20mm graded stone aggregate) and connecting the incomming/outgoing feeder by providing brass cable glands and Lugs complete all as specified and directed comprising of followings accessories:- 59 Incoming:- (i) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal Setting-01 No.Outgoing:-(i)MCCB 3 Pole 63 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with adjustable thermal Setting - 02 Nos (ii) Single phase preventor -02 Nos(iii) On load Change over switch 4 pole of current raring 63 A (open execution type) - 01 No(iv)MCB SPN 10 Amp C curve, 10 KA capacity - 01 No(v) fully automatic Star-delta starter 15 HP or recommended by manufacturer of motor -02 Nos(vi) LED Indicator lamp (R,Y,B)- Set of Three.(vii) Multifunctional meterDigital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase -0 1No. 60 M&L for construction of header of ERW pipe having size dia 300 mm and length 2.5 m with two inlet connection of size 100 mm & three otlet connection having size 150 mm complete monting on RCC base/plinth etc complete all as specified and as directed by Engr-in-charge. 61 EXTERNAL ELECTRIFICATIONBoring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe upto 100mm dia complete all as specified and directed.Note :- GI pipe shall be measured and paid separately. 62 Taking out existing HT XLPE U/G cables, 11000 V grade from trenches/ducts/ poles etc of size 120 Sq. mm 3 Core etccomplete all as specified and directed. 63 Dismantling and taking down existing transformer mounted on four pole structure and shifting to nearest suitable location including its fixing on newly constructed platform and making all connection, testing as per requirementetccomplete all as specified and directed. 64 Dismantling and taking down existing 4-pole structure etccomplete all as specified and directed. 65 Dismantling and taking down existing 03 Nos of LT Panels, refixing at specified locationincluding connecting etc complete all specified and directed. 66 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 240 Sq. mm 3.5 Core etc complete all as specified and directed. 67 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 185 Sq. mm 3.5 Core etc complete all as specified and directed. 68 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size upto 95 Sq. mm 3.5 Core etc complete all as specified and directed.Note For item No. 57 to 63 :- The old material obtained from site shall be deposite by contractor in MES store yard without any extra cost as directed by GE. 69 M&L for construction of plateform of size 3500 x 3500 x 1200mm with brick construction in cement mortar 1:4 PCC (M-10 nominal mix) in foundation, 100mm thick RCC M-25 grade slab, with 8mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side XPM Jali fixed on angle iron 40x 40x6 mm post upto height of 8 feet above ground level and openable gate with locking arrangment including making provision for entry and exit of HT/LT cables and steps made to access to the top of plateform including plastering to bricks masonary complete including painting with 2 coats of whitewash on plastered surface and painting steel surface with 2 coats of red oxide primeretc complete all as specified and directed. 70 Supply & fix HT 11 KV, outdoor type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complee with drop out fuse having 12 insulators of rating upto 200 Amps etc complete all as specified and directed. 71 Supply and fixing lightning arrestor HT 11 KV, 10 KA station class etc complete all as specified and directed. 72 Supply & errect 2 pole structure on 11 mtr PCC pole consisting of pole with anti-climbing device, PCC foundation & cross arms (Bracings) etc for one incoming and one out going. etc complete all as specified and directed. 73 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station (CSS) ,315KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply .Package substation will have the following equipment :- 74 HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos 75 (vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 SetTRANSFORMER315 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 955W and Max Losses @ 100% Load 2750 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be conforming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 500 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)500 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB)(ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 76 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust. 77 construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 78 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station , (CSS) 400KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply.Package substation will have the following equipment :-HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the 79 RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos.(vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set 80 TRANSFORMER400 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 1150W and Max Losses @ 100% Load 3330 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 630 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)630 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) (ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 81 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robustconstruction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 82 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge(Panel 1 - Near mains transformer GTC Area):- 83 INCOMING :-(i) S&F ACB 4 Pole 630 amps ,415 Volt electrical drawout type of breaking capacity not less than50 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 750 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBsOUTGOING:-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of block )(ii) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(ivDigital volt meter 0-400 V with selector switch - 01 No.(v)LED Indicating Lamps R,Y,B - 01 Set of three 84 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2 - Near Chambal Vihar Main Tfr Panel):-INCOMING :-(a) S&F MCCB 4 Pole 500 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(b) Aluminium electrolite Busbar 600 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 85 OUTGOING:-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of blocks)(ii) S&F MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Street light timer using Power contactor 32 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(iv)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(v)Digital volt meter 0-400 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 86 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1A - LT PANEL FOR 3 X BLOCKS GTC):-INCOMING :-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 87 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 04 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 88 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2A - LT PANEL FOR 2 X BLOCKS CHAMBAL VIHAR):-INCOMING :-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 89 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 03 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 90 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1B & 2B):-INCOMING :-(i) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range-01 No incoming.(ii) Aluminium Electrolite Busbar 300Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 91 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series. - 01 Nos (for PH Panel)(ii) MCCB 4 pole 40 Amp, 415 V, 16 KA, C-series- 02 Nos (sewage PH +spare).(iii) MCB TPN 25Amp, 230 V, 10 KA, C-series - 07 Nos (Lifts+fire fighting+Street lights)(iv)Street light timer using Power contactor 25 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(v) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(vi) Digital volt meter 0-500 V with selector switch - 01 No. (vii) On load Change over switch 4 pole of current raring 63-100 A (open execution type) - 01 No.(viii)LED Indicating Lamps R,Y,B - 01 Set of three 92 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel D - DOE Area):-INCOMING :-(i) S&F MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0)-01 No incoming.(ii) Aluminium Electrolite Busbar 150 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 93 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series - 02 Nos (for Bldg + Spare)(ii) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (Garages + Spare).(iii) MCB SPN 10 Amp, 230 V, 10 KA, C-series - 02 Nos (Security light + Spare)(iv) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(v) Digital volt meter 0-500 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 94 M&L for factory made busbar box 750 Amps rated Aluminium busbar, 3 phase, 4 wire, 415 Volt of size not less than 300mm x 200mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wal by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 95 M&L for factory made busbar box 600 Amps rated Aluminium busbar, 1 phase, 245 Volt, size not less than 200mm x 150mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wall by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 96 Supply and fixing poly carbonatejunction box , weather and vermin proof of size 250X250X160 including provn of 4 Nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitabely mounted on bus bar insulators ,including one No. MCB SP 6 Amps for light control,drilling of holes.Provn of suitable size of GI nuts, bolts, double washer and FI clamps ofsuitable sizefor taking connections and fixing on LT steel tubular poles complete with locking arrangementcomplete all as specified and directed. 97 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5Sqmm 1100 Volt , draw through LT steel tubular polesfor connection to street light from junction boxetc complete all as specified & directed. 98 S&F for Cable route indicator, duly engraved with LT CABLE 1100 VOLT on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size etc complete all as specified & directed. 99 M&L for Precast PCC (1:2:4) type B-1 cable path indicators of size 300x100x500mm rounded top having engraved in capital letters HT Cable embedded in position in PCC(1:3:6) Type C-1, using necessary formwork and including provision of two coats of cement base paint on exposed concrete surface and writing HT Cable in black synthetic enamel paint etc complete all as specified & directed. 100 M&L fordecorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watts including LED lamp etc complete all as specified & directed. 101 M& L for shifting of 33 KV HT cable to a safe distance from proposed building, supply, laying, testing & commisioning of 33 KV cable in replacement with new as per estimate provided by State electricity deptetc etc complete all as specified & directed. 102 FIRE FIGHTINGS&F forAutomatic air release valve 50mm dia suitable for domestic water with 25mm gun metal stop valveetc complete all as specified & directed. 103 S&F forbranch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090etc complete all as specified and directed. 104 S&F forfix Valve, stop, screwed, 25 mmdia pipeetc complete all as specified and directed. 105 S&F for6 kg capacity Multipurpose dry chemical powder (ABC) type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/charged .etc complete all as specified and directed. 106 S&F forCO2 type fire extinguisher of 3 Kgs capacity with steel cylinder with a discharge valve and confirming to IS : 15683.Extinguisher shall be painted with red enamel apint and fixed to wall with bracket etc complete all as specified and directed. 107 S&F for9 Ltr capacity Foam type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/chargedetc complete all as specified and directed. 108 S&F fortesting of Star-Delta starter Panel for fire fighting pump motor etc complete all as specified and directed. 109 Supply, installation, testing & commissioning ofFIRE SIGNAGES for indication/information of fire exit, alarm panel, fire extinguishers fire axe, hose reel, hydrents, lifts of size 300mmx100mm etc complete all as specified and directed. 110 DG SETSSupply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 180 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 111 (A) Engine (prime mover) : Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. 112 (C) Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate.(D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1No 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications.(F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - 113 (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running (iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- 114 AC voltmeter - 01NoVoltmeter selector switch OFF/RY/YB/BR - 01NoFrequency meter - 01NoAC voltmeter of suitable scale - 01NoAmmeter selector switch OFF/R/Y/B - 01NoCurrent transformers of suitable ratio - 01NoBattery charger consisting of - 01No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01NoMains supply voltage monitor - 01NoSet of DC control relays and timers - 01NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01No 115 01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 116 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 117 Supply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 125 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 118 (A) Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. (C)Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate. 119 (D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1Nos 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications. 120 (F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running(iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- AC voltmeter -01 NoVoltmeter selector switch OFF/RY/YB/BR - 01 No 121 Frequency meter - 01 NoAC voltmeter of suitable scale - 01 NoAmmeter selector switch OFF/R/Y/B - 01 NoCurrent transformers of suitable ratio - 01 NoBattery charger consisting of - 01 No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01 NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01 NoMains supply voltage monitor - 01 NoSet of DC control relays and timers - 01 NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01 No01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. 122 KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 123 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 124 Supply, installations, testing of electric chimney of size 60cm havingsuction capacity of 1200 cum per hour with filterless technology sealed motor and insulationfor oil deposit and water vapour alongwith self autoclean feature after 30 cycles of operation and minimum 5 year warranty etc etc complete all as specified and directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
8.
Health and Family Welfare #11254887 AOC
Bids Are Invited For Condenser Blade - Material In Plastic Suitable For Split Ac 2 Ton Size 17Point5 , 4 Mfd Capacitor - Capacity Type 4 Mfd Material Type Copper Shape Type Round Connection Type Wired , Samsung Timer - Body Material In Plastic Voltage 120V In Refrigerator Samsung Timing Approx 9 Hours 40 Min Comp 12 Min Heater Product Capacity Above 250 Litres Of Double Door Refrigerator , White Wrapping Tape - Adhesive - Rubber Base Material - Pvc Type - Non Adhesive Suitable For Copper Clubbing Each Nos 15 Meters , Teflon Tapes - Material Poly Tetra Fluoro Ethylene Features Heat Resistance Each Nos 10 Meters , Cello Tape 2 Black - Colour Black Material Biaxially Oriented Polypropylene Uses Wrapping Of Ac Copper Pipes And Packing Purpose , Cotton Waste - Colour White , Danfoss Relay Set 20 Deep Freezer - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , 80 By 100 Mfd Capacitor - Capacity 80 By 100 Mfd Voltage 275 Vac 50 Hz , Minus 20 Deep Freezer Square Type - Fan Type Square Voltage 220 V, 50 Hz Wattage 65 Watts Heat Sink Material Copper , Pin Remover Charging - Item Is Valve Core Remover Installer Material Type Copper Service Ports Is 1 By 4Inch And 5 By 16 Inch Sae Female Bypass Ports Is 1 By 4 Inch Sae Male , Thermostat Minus20 - Model Wpf 20 250 V 4 Of 6A 50 Or 60 Hz Suitable For Minus20 Deep Freezer Vertical , Relay Danfoss - 103N0021 25Ohm 463 220V 240V , Capacitor 4 Mfd - Capacity 4Mfd 280 V Ac 10000H Ki 8 50 Or 60 Hz Material Shape Round Type , Condenser Fan Blade For 2 Ton Llyod Ac - Material Plastic Suitable For Split Ac 2 Ton Size 17 Point 5 , Pinch Pliers - Color Multicolor Primary Material Ss , T Handle 10Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Handle 12Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Sand Paper - Color Brown 80 Grit , 1 By 4Inch Ratchet - 3 By 16 Inch And 1By4 Inch Square X 1By2 Inch And 9By16 Inch Hex Ratcheting Refrigeration Wrench , Refrigerant Recovery Plier - 1By4 Sae Interface Material Ss , Allen Key Set In Inches - Item 10 Pack Of Allen Key Material High Grade Alloy , Cold Room Evaporator Fans - Make Hi Cool Model 4E 450S 230 V 50 Hz 1Point15a 155 Or 250W 1350 R By Min Axial Fan Motor Warranty 1 Year , 8 Mfd Capacitor - Body Material Metal, Connection Type Wired Voltage 440 Vac 50 Hz , Nose Pliers - Make Taparia Material Carbon Steel Handle Material Plastic Rubber Steel , Wire Cutter - Harden 7Inch Professional Electric Wire Cutter Stripper Made Of Zinc Alloy And Supports Wire Diameter Range 4 Mm Features Cut And Stripping Line Two-In-One Product Combined With Cut Line And Stripping Two-In-One Powerful And Durable Ergonomic Designed Handle Multipurpose Wire Stripper Under The Tangent Mouth Design Tangent Convenient Sharp And Durable Save Labor Force Spring Design Mached With A Length Of 47Mm Gun Mouth Convenient And Quick Efficient Adjustable Knob Wire Stripping Force Can Be Adjusted By The Knob Size To Avoid Excessive Damage To The Wire And Cable Ergonomic Handle According To The Human Body Design Feel Comfortable And Durable , Charging Line R32 - Make Value Material Brass 3Pc Charging Hose Suitable For R32 Gas Charging , Two Way Manifold Gauge With Box And Hose - Make Value Model No Vmg2 R410a 02 Pressure Range 30 500Psi Low 0 800Psi High Hose Red And Blue And Yellow 1By4inch 1By4inch 3X1pc , 46 Pcs Set - Make Stanly 46Pcs 1By4 Inch Drive Box End Socket Set Metric Ratchet Wrench Set With 4 To 14Mm Cr V Sockets S2 Bits Extension Bars Material Ss , Cylinder Key - Material Ss , Tourch For Butane Gas Cylinder - Make Clix Nozel Single , Swaging Tools - Swage For 1By4inch 5By16inch 3By8inch 1Byinch 5By8inch 3By4inch 7By8inch , Rough File With Handle - Make J K Thickness 3 Mm Material High Carbon Steel Width 12 Mm Length 100 Mm , Double End Spanner Set 6X32 Mm - Make Taparia Size 6Mm To 32 Mm Type End Type , T Set 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Set 14Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Drain Line Spring - Length 30 Meters Material Steel Color Silver Packaging Size 30 Meters , Single Gauge High Side - Make Value Model Vmg 1S H Pressure 0To800 Psig Material Brass , Measuring Tape 5 Meters - Make Stanly Coating Tylon Blade Lengh 5 Meters Body Material Rugged Rubber , Expansion Valve For Cold Room - Make Model Erse 4C Body Machined Brass Bar Seat Brass Port Machined In Body Pin Stainless Steel Pushrod Stainless Steel Type Of Joints Knife Edge To Metal Connections Odf Copper Fittings Silver Soldered To Body Inlet Strainer No Strainer Suitable For R 22 Refrigerant , Condenser Motor - Make Llyod Model Ydk68 6Bl Kw68b Rpm 900 Rotation Ccw , Condenser Blade - Material Plastic Suitable For Split Ac 1Point5 Ton Size 16Inch , Capacitor 3 Mfd - Body Material Plastick Connection Type Wired Voltage 440 Vac 50 Hz Capacity 3Mfd Shape Round , Digital Temp Meter - Make Hitcahi Model No Hd 306 Humidity Range 0 To 100 Rh Temperature Range Minus20c To Plus200c) Warranty 1 Year , Samsung Heater - Uses Refrigerator Heater Size 14 , Timer - Model Td20 Csa Power 220V 50 Hz Number Of Terminals 4 , Condenser Fan Blade - Material Plastic Suitable For Split Ac 2 Ton Size 17Point5inch , Valve 3By8inch Hand Shut Off - One Side 1By4inch Male Flare Other Side 3By8inch Male Flare Material Fully Brass With Handle , Cylinder Valves - Model Cga 320 Type Handle Material Brass Outlet 1/4Inch , Condenser Motor - Ge Motor Cpn 2Az0 10To 090Coma 920 Rpm Cwse 1By5 Hp , Fan Blade - Material Aluminum Suitable For The Ge Motor Cpnto2az0 To10to090 Size 19Inch , Hand Cutter Blade Iron - Size 4Inch 107X1point0x16 Mm 4Inchx3by64inchx5by8inch 15300 Rpm Double Net Max Speed 80 Ms Metal Cutting Wheels , Adjustable Wrench 6Inch - Make Taparia With Rubber Grip Size 6Inch , Adjustable Wrench 8Inch - Make Taparia With Rubber Grip Size 8Inch , Adjustable Wrench 12Inch - Make Taparia With Rubber Grip Size 12Inch , Allenkey Set Mm - Item 10 Pack Of Allen Key Set Material High Grade Alloy , Flaring Tools Set With Box - 1 X Flaring Tool 1 X Inch Pipe Clamp 1 Xmetric Pipe Clamp 1 X Pipe Cutter 1 X Pipe Deburring Tool Material Ss , Smooth File With Handle - Make J K Size 10Inch Width 25 Mm Thickness 5Point8 Mm , R22 Charging Line - Make Value Material Brass 3Pc Charging Hose Suitable For R22 Gas Charging , T Handle Only 1By4inch - Handle Length 12Inch Material Ss , Multitec Screw Driver - Ph1 And S5 Ph0 And S3 In Reversible Configuration Chrome Plated Finish , T Handle 8Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 8Inch , T Handle 11Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 11Inch , T Handle 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 13Inch , Tube Cutter - Make Value Model Vtc-42 Tube Diameter 1By4inch 1 5By8inch 6 To42 Mm , Flare Nut 3By4inch - Material Brass Size 3By4inch , Square Type Condenser Fan Motor - Power 230 V Watts 36W Rpm 1500 Rpm With Stand And Blade , Tong Tester With Probes And Leather Cover - Make Fluke Model 302 Type Digital Ac Clamp Meter Jaw Opening Size 30 Mm Voltage Range Dc 0To600v Current Range Ac 0To400 A Voltage Range Ac 0To600 V Power 2 Aa Batteries 1Point5v Resistance Range 4000 Ohm Warranty 1 Year , Screw Driver Long - Make Taparia Model 931 Type Long Handle Tip Type Phillips Usage Household Product Type Screwdriver , Hammer With Wooden Handle - Make Taparia Made From High Grade Chrome Vanadium Steel Is 841 1983 Weight 500 G Type Ball Pein , Cutting Plier - Maketaparia Model 1621To8or1621to8n Combination Pliers , Tube Cutter Small - Cutter Size 1By8inch To 5By8inch Material Ss , Hexa Frame With Blade - Make Stanly , Evaporator Fan Motor For Lg Refrigerator - Make Lg Electronics Model Rda082e03 Rohs Pno Eau41681402 Ac230v Or 50 Hz 0 Point 20 By 1300T Refrigerator Model No Gl 365Yvqg5 Dsuzebn , Condenser Copper Coil Make Llyod - Copper Condenser Coil For The Llyod 1Point5 Ton Ac Size 20X30 Inch , Filter - Material Copper Type 2 Way , Single Pressure Gauge High Side500psi - Make Wikai Pressure Range 0To800 Psig Material Brass , Gauge Value - Make Value Model Vmg1slr32 Pressure 0To350 Psig Material Brass , Danfos 20 Relay Olp Set - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , Try Square Set - Size 6Coma8coma10 Inch Material Carbon Steel Blade 90 Degree Heavy Duty Right Angle Ruler , Valve Core Removal Tool - Item Valve Core Remover Installer Material Copper Service Ports 1By4 Inch And 5By16inch Sae Female Bypass Ports 1By4inch Sae Male , Digital Vernier Callipers With Batteries - Material Stainless Steel Measurement Accuracy Plus Or Minus 1Percent , Siron Soldering Iron Set - Make Siron Model Dss60 Voltage 24V Power 60W Temperature Range 150 To 480 Degree Centigrade , Soldering Wire - Package Spool Type Wire Solder Wire Gauge 24 And 25 Awg Process Leaded Weight 500G , Compressor Cable Kit - Cable Feature Heat Resistance Features Both Side Clips Each Wire 2Point 5 Sq Mm Copper Cable , Handset Valve 1By4inch - One End 1By4inch Sae Female Flare The Other End 1By2 Acme Male , Cuppler - Size 1By4inch And 3By16inch Material Ss , 24 Socket Wrench Set Ratchet - Make Stanley Piece 1By2 Inch Drive Sliding Tee 1 Piece 1By2 Inch Drive Universal Joint 18 Pieces 1By2 Inch Drive 6 Point Sockets 10 Mm 11 Mm 12 Mm 13 Mm 14 Mm 15 Mm 16 Mm 17 Mm 18 Mm 19 Mm 20 Mm 21 Mm 22 Mm 23 Mm 24 Mm 27 Mm 30 Mm 32 Mm Box Included 1 Piece 1By2 Inch P9 Ratchet 2 Pieces 1By2 Inch Drive Extensions 130 Mm And 250 Mm 1 Piece 12 Inch Drive Spark Plug Socket 21 Mm , Pin Valve - Valve Type Pin Valve Exterior Finish Copper Outlet Connection Flange Material Copper 1 Packet 10 Nos , Charging Line Handle - Air Conditioner Refrigerant Angled Ball Valve 1By4inch Sae For R410a R134a R12 R22 Ac Hvac With R410a Adapter R134a Refrigerant Adapter Valve Core Thimble Remover For Mini Split System Material Brass Inlet Connection Size 0Point25 Inches Inlet Connection Type Npt Outlet Connection Type Sae Number Of Ports 3 Outlet Connection Size 0Point25 Inches Valve Type Ball Valve , Capacitor 50 Mfd - Capacity 50 Mfd Material Non Pcb Shape Round Mounting Type Internal , 3 Way 30 Amps Connector - Current Ratings 30 Amps Connector Type Screw Material Bakelite High Current Capacity , Ss Tank Nipple 1By2inch - Material Brass Thread Size 15 Mm Item Dimension Lxwxh 15 X10 X 5 Cm , Pvc Connection Pipe 1 By 2 Inch - 24 Long Brasstail Nut Connection Pipe With White Pvc 15Mm 1By2 Inch Hosepipe 60Cm , Ro Water Purifier T Type Tap - Colour Blue For The Ro Water And Material In Plastick , Ro Water Purifier Tap Tank Kent Type - Color Blue Material Plastick , Charging Line Rubber - High Quality Grade Rubber 1 Packet Equalto 50 Nos , Pipe Wrench 16Inch - Make Taparia Model 1273To12 , Bearings - 6201Z , Oil Seal - 25 47 7 A 1 Oil Seal Rajson Enterprises , Ss Breazing Roads - World Class Welding Electrodes Super Stainless Steel 308L Size 3Point15 X 350 Mm , Bluestar Indoor Blower For 1Point5 Ton Sac - Length 25Point3 Inch , Line Tester - Make Taparia Model 813 , Screwdriver Small - Make Multitec Model R6100i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 150Mm , Screwdriver Large - Make Multitec Model R6250i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 300Mm , Handle T - Make Taparia Model Takm9 , Jet Pump Handle Small - Hoselength 8M And Waterflow Rateof 8 Lperh Portable Maxium Pressure 300Bar , Araldite 500Gms - Weight For 180G The Each , Double Ended Ring Spanner Set - Make For The Taparia Size 6Mm To 32 Mm Type Ring Type , Single Guage Low Pressure For Vaccume - Make Value Model Vmg 1 S L Pressure 0To350 Psig Material Brass Suitable For R22 Refrigerant , T Type Handle Spanner Set - This Set Includes Seven Metric Sizes 8 10 12 13 14 17 And 19 Mm T Handles , Continuity Tester Compressor Check - Power Source Battery Style Digital Sound Yes Beep , Servicing Covers - Material Polyvinyl Chloride Color Blue Or Black Water Resistant Yes , Compressor For 345 Liters Refrigerator - Make Samsung Or Equivalent Model Number Mk172k S1u Refrigerant R134a Phase Single Type Rotary Warranty 1 Year , Electrical Relay - Relay With 5 Mfd Capacitor , Compressor For Minus20 Deep Freezer 320 Liters - Make Voltas Or Equivalent Model Number F60nl Refrigerant R290 Phase Single Warranty 1 Year , Compressor For 165 Liters Bpl Make Refrigerator - Makebpl Or Equivalent Model Number Sl19j-5 Refrigerant R12r134a Phase Single Warranty 1 Year , Compressor For Minus20 Deep Freezer 350 Liters - Make Danfoss Or Equi Model Nl9f And Refrigerant R134a Phasesingle And Warranty 1 Year , Filter Drier Pencil Type - Material Copper Type 2 Way For 134A Refrigerant For Minus20 Deep Freezer , Compressor For -20 Deep Freezer 500 Liters - Make Danfos Or Equivalent Model Numbersc12g Refrigerant R134a Phase Single Warranty 1 Year , Compressor For 1Point5 Tr Split Ac Rotary Type - Make Sci Or Equivalent Model Number- Rh313vamt Refrigerant R22 Phase Single Type Rotary Warranty 1 Year , Side Dummy Nuts 5By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 5By8inch , Side Dummy Nuts 1By2inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By2inch , Side Dummy Nuts 1By4inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By4inch , Side Dummy Nuts 3By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 3By8inch , Dummy Nuts 1By4inch - Hexagonal Brass Forged 1By4inch Flare Dead Nut , Ductable Split Ac Indoor Blower - Size 226X155 Suitable For 5Point5 Tr Duct Able Ac , Rubber Bushes - Type Star , Minus20 Deep Freezer Compressor - Make Embraco Or Equivalent Model Nek2150gk Warranty 1 Year , Drier Cum Filter - Make Danfoss Model 023Z5004 Size 1By4inch Brazing Type , Refrigerant R 600A - Make Godrej Of Skf Specific Name R600a Gas Type Hydrocarbon Packaging Size 200G , Hand Shut Valve For R600a Portable Cylinder - Material Brass R600a Gas Can Tap Valve With Handle Uses For Portable Gas Cylinder , Water Pipe Pvc - Flexible Water Pipe Pvc Durable Flexible Ant Kink , Acetylene Cylinder Regulator - P1 Equalto 30 Bar P2 Equalto 4 Bar Q1 Equalto 1Point9 M Per H Two Stage Gas Regulator Pressure , Oxygen Cylinder Regulator - P1 Equalto 100 Bar P2 Equalto12 Bar Q1 Equalto 30 M Per H Two Stage Gas Regulator Pressure , Hose Pipe For Acetylene - Color Red Material Rubber Brass Iso Standards , Hose Pipe For Oxygen - Color Red Material Rubber Brass Iso Standards , Torch For Oxygen Acetylene Cylinder - Uses Brazing Of R And Abyc Equipments With Iso Standards , Clamps For Hose Pipes - Size 1By2 Inchs Material Brass Uses For Hose Pipe Clamping , Hand Hacksaw Bladed - 14Inchx1inch 0 Point 050 , Axial Fan Motor For Hitachi 16Point5 Ton Ac - Make Hicool Model 4D 630S Size 25Inch 630Mm Voltage 415 Vac Power 815 Watt Current 1Point6 Amps Speed 1320 Rpm Air Direction Suction Warranty 1 Year , Compressor For Ice Machine 120 Kg Per Hr Production - Make Cubigel Or Equivalent Model No Gp14tb Refrigerant R134a Power 3By8 Hp , Filter Cum Drier - Type Brazing Size 1 By 4Inch , Compressor For Bluestar Split Ac 1Point5 Ton - Make Mistubishi Ics Or Equivalent Model Rh313vadt Refrigerant R22 Capacity 1Point5 Ton , Capacitor 45 Mfd - Capacity 45 Mfd Material Non Pcb Shape Round Mounting Type Internal , Capillary Tube Gauge - Make Refco For Measuring Capillary Inside Diameters , Soldering Liquid Flux - Uses For Stainless Steel & Multi Metals Soldering Packaging Size 100Gm , Blower For Lloyd Make Split Ac 1Point5 Ton - Size 34 1By4inch Or 87 1By2inch Cm Suitable For 1Point5 Ton Lloyd Split Abyc , Pvc Pipe 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Bends 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Pipe 1Inch - Size 1 Inch Material Pvc Conduit Color Grey , Pvc Bend 1Inch - Size 1Inch Material Pvc Conduit Color Grey , Clamps 3By4inch - Material Upvc Size 3Byinch 1 Packet 100 Nos , Clamps 1Inch - Material Upvc Size 3By4inch 1 Packet Equalto 100 Nos , Pvc T Joint 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Solvent - Hp 901 Pvc 50 Ml Packaging Size 50 Ml , Cutting Machine Blade - 105 Mm 105X1x16 , Vc T Joint 1Inch - Psize 1 Inch Material Pvc Conduit Color Grey Total Quantity : 655
Contract Date: Ref. Documents Contract Value : 10.10 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 1
9.
Civil Aviation #11209499 AOC
Bids Are invited for Operation and maintenance of Electrical and Mechanical installations - Operation and maintenance of Electrical and Mechanical installations of operational and non operational areas including Terminal buildling, ATS Building, Fire station, Electrical Substation and other ancillary buildings for round the clock operation on all days including Sundays and Holidays by engaging following manpower along with providing required tool and consumables as specified in special conditions of contract for day to day maintenance except spares. The job includes preventive, routine maintenance, attending complaint or fault or breakdown by taking rectification actionensuring serviceability and satisfactory working condition of the system, maintaining all records and documentation etc. complete as per agreement conditions and as per the instruction of EIC.1. Supervisor (Highly Skilled) - 01 no.2. Document Assistant (Highly Skilled) - 01 no.3. Wireman (Skilled) - 07 nos.4. Semi-skilled- 06 nos.5. Helper (Unskilled) - 03 nos.(The above manpower is excluding reliever) , Job contract for Operation and Day to Day Maintenance Services of Airport Systems equipments - Job contract for Operation and Day to Day Maintenance Services of Airport Systems equipments including SCCTV Camera System, FIDS , PA System, HHMD, DFMD, Security Equipments, BDDS equipments, XBIS machines, ETD Equipment etc. installed at terminal building, ancillary building at Rupsi Airport. Job also includes attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, providing registers and log books as per formats given in tender document and maintenance of daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, registers and log books and coordination with OEM Technicians during CMC works etc. by deploying following manpowers as per scope of work given in special conditions of contract shall be ensured round the clock (ie. in one shifts basis) on all days including Sundays & National Holidays as per direction of EIC and as per attached Annexure-A of ATC. 1. Supervisor (High skilled) -01 no. 2. Technician ( Skilled) -01 no. (The above manpower is excluding reliever) , Execution of item of Schedule of rates CPWD DSR 2022 as and when required - Execution of item of Schedule of rates CPWD DSR 2022 as and when required for attending breakdown, repair and maintenance and upkeep of internal & external electrical installations as per direction of E-I-C at different locations of operational and non operational area i/c Terminal Building, ATS Building, Fire Station, Electrical substation and other ancillary buildings etc. The bidder shall quote the rate in INR only including price escalation for 01 year for the job corresponding to an amount of Rs. 1,00,000.00 (including GST from DSR 2022 items) and percentage (%) above/below shall be calculated by AAI and paid accordingly. , Testing of Transformer oil sample including conducting BDV test and submission of test report etc complete as required - Testing of Transformer oil sample including conducting BDV test and submission of test report etc.complete as required , Filtration of Transformer oil of 630 kVA transformer - Filtration of Transformer oil of 630 kVA transformer to attain acceptable di-electric strength by hot streamline process including arrangement of plant/machine, transportation etc. complete as required by topping of Transformer oil and BDV testing including submission of test reports before & after dehydration of oil. (excluding cost of Transformer oil) (Item is to be executed if the BDV value of transformer oil is found below the stipulated value). , Servicing and Checking of LT Air Circuit Breaker - Servicing & Checking of LT Air Circuit Breaker (ACB) of L&T U POWER OMEGA make by deploying Authorised Service Personnel of Manufacturer/ OEMs Service Dealers as per OEMs standards complete as required and submission of service reports. , Servicing and Checking of HT Vacuum Circuit Breaker - Servicing & Checking of HT Vacuum Circuit Breaker (VCB) of Siemens make by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of service reports. , Calibration and testing of relays at HT Panel - Calibration and testing of following relays at HT Panel by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of service reports.i) Vamp 57 - 5 Nos. (Numerical type of Schneider Make)ii) VAJH13 - 5 Nos. (Tripping Relay of Alstom Make)iii) VAX31 - 5 Nos. (Trip Circuit Supervision Relay of Alstom Make)iv) VAA33 - 4 Nos. (Auxiliary Relay of Alstom Make) , Calibration and testing of following relays at LT and Synchronizing Panel - Calibration and testing of following relays at LT & Synchronizing Panel by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of service reports.i) VAJH13 - 2 Nos. (Tripping Relay of Alstom Make)ii) VAX31 - 2 Nos. (Trip Circuit Supervision Relay of Alstom Make)iii) CCUM21PF112A - 2 Nos. (Definite Time Reverse Power Relay of Areva Make)iv) CAG14AF15A - 2 Nos. (Instantaneous Earth fault Relayof Alstom Make) , Scrubbing, cleaning the existing surface of cubicle panel, feeder pillars and painting - Scrubbing, cleaning the existing surface of cubicle panel, feeder pillars & painting the same with one coat of primer and one coat of synthetic enamel paint of approved colour etc. complete as required , Lettering of maximum 2 inch size Alphabetic or numerical - Lettering of maximum 2inc size (Alphabetic / numerical) on the finished painted surface of feeder pillar / panel / earth pits with synthetic enamel paint of approved colour etc. complete as required. , Cleaning the surface of MS chequered plates - Cleaning the surface of MS chequered plates and painting with one coat of primer and two coats of synthetic enamel black paint etc. complete as required. , Supply and replacement of silica gel in breather of existing 630 KVA transformer etc. complete as required , Lifting and lowering of 10 HP borewell submersible motor pump set - Lifting and lowering of 10 HP borewell submersible motor pump set along with dismantling of complete delivery pipeline, removal of pump sets, disconnection of flexible submersible cable, reassembling of submersible pump, complete delivery pipeline, fixing / laying of existing submersible cable including electrical connection, testing and commissioning etc. complete as required. , Servicing and complete overhauling of 10 HP borewell submersible motor pump set - Servicing and complete overhauling of 10 HP borewell submersible motor pump set including replacement of defective bearing, coupling, impellar, mechanical & oil seal, heat varnishing of motor etc. complete as required , Decoration of Terminal Building and Canopy of Rupsi Airport - Decoration of Terminal Building and Canopy of Rupsi Airport, in Tri-Colour, with the following lighting items of pattern approved by E-i-C or his authorized representative, for 03 days etc. complete as required.i) 60 nos. LED series lighting chain (minimum chain length 5m and uniform spacing between chains not more than 0.75 m)ii) 20 nos. RGB LED Facade/ Disco/ Flood light fittings (minimum 10000 lumen output) , Supply and replacement of defective smoke detectors - Supply and replacement of defective smoke detectors of suitable make & model compatible to theexisting system. , Supply and replacement of defective manual call point - Supply and replacement of defective manual call point of suitable make & model compatible to the existing system , Supply of convertor or driver suitable for PHILIPS make 20 W downlight types LED luminaires or fittings - i) PHILIPS make 20 W downlight Type DN195B LED20S , Supply of convertor or driver suitable for OSRAM make 120W types LED luminaires or fittings - ii) OSRAM make 120W Type. LEDENVO LED Street Light , Supply of convertor or driver suitable for HAVELLS make 18 or 20 W downlight types LED luminaires or fittings - iii) HAVELLS make 18/20 W downlight , Supply of convertor or driver suitable for WIPRO make 36W 2ftx2ft recess mounted fitting - iv) WIPRO make 36W 2ftx2ft recess mounted fitting , Supply of 1000W 240V Lamp suitable for Aerodrome Beacon - Supply of 1000W , 240V Lamp suitable for Aerodrome Beacon of model AB-1000F Make- Manairco Inc as and when required. , Supply of Aerodrome Beacon - Supply of Aerodrome Beacon of model AB-1000F Make- Manairco Inc as and when required. , Calibration of Clinometer - Calibration of Clinometer from Govt. Test laboratory/ OEM, submission of test report etc., complete as required i/c taking the equipment from AAIs site to laboratory and bringing back the same from laboratory to AAIs site. , Supply of reflector suitable for AMA make PAPI - Supply of reflector suitable for AMA make PAPI fittings as and when required. , Supply of 2C x 4 sq mm. Secondary lead with Plug - Supply of 2C x 4 sq mm. Secondary lead with Plug at one end of standard length of 5 m as and when required , Supply of B connector or four way porcelain terminal - Supply of B - connector / four-way porcelain terminal for AMA make PAPI units as and when required , Supply of 5 kV grade 50 Hz AC Isolating Transformer - Supply of following rating 5 kV grade, 50 Hz AC Isolating Transformer, series type, encapsuled inpolyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as and when required. 200 Watt, 6.6/6.6 Amp. , Supply of two pin halogen lamp Holder suitable for 200 Watt - Supply of two pin halogen lamp Holder suitable for 200 Watt, 6.6 Amp Lamp as and when required. , Supply of 5 W Screw Cap LED lamp - Supply of 5 W Screw Cap LED lamp suitable for Landing T , efficacy not less than 100 lm/W as and when required. , Supply of Wind Sock Cloth - Supply of Wind Sock Cloth, 13 ft 9 inch length, colour preferably Orange & White and conforming to ICAO Annex-14 as and when required. , Supply and replacement of LED flood light - Supply and replacement of LED flood light for mounting on Wind Direction Indicator, equivalent to Philips make Model BVP132LED16/CW 20W 100-240V WB IN as and when required. , Supply and replacement of Obstruction Light of Wind Direction Indicator - Supply and replacement of Obstruction Light of Wind Direction Indicator as and when required. , Supply and replacement of 180 AH 12 V Lead Acid battery - Supply and replacement of 180 AH 12 V Lead-Acid battery, conforming to IS 14257 1995 with up to date amendments, suitable for high cranking performance of 400 kVA DG set as and when required. , Supply and replacement of 100 AH 12 V Lead Acid battery - Supply and replacement of 100 AH 12 V Lead-Acid battery, conforming to IS 14257 1995 with up to date amendments, suitable for high cranking performance of 62.5 kVA DG set as and when required , Supply of Automaic Electric Hand drier - Supply of Automaic Electric Hand drier of following specifications or equivalentMake OMCO, Model IPX1,Voltage-220-240V, Power 1800W , Servicing, Checking Repairing Overhauling and Testing of CROMPTON make 630 KVA Transformer - Servicing, Checking, Repairing, Overhauling and Testing of CROMPTON make 630 KVA, 11/0.433 KV Transformer including carrying out the following tests by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of reports.a) General inspectionb) IR value test primary to secondary, primary to earth, secondary to earthc) Votage ratio check at all tap position,d) Buchholz relay operatione) OTI operationf) WTI operationg) On-Load Tap changer operation checkh) Cleaning of transformer and replacement of silica geli) Acidity Check test of Transformer Oil. Total Quantity : 599
Contract Date: Ref. Documents Contract Value : 92.89 Lakh
Boards / Undertakings / PSU No of Bidders 7
West Bengal View Result →
10.
Housing Urban and Rular Development #11201692 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : 71.23 Lakh
Government Departments No of Bidders 4
Maharashtra View Result →
11.
Housing Urban and Rular Development #11201691 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : 64.24 Lakh
Government Departments No of Bidders 4
Maharashtra View Result →
12.
Housing Urban and Rular Development #11201690 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : 71.33 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
13.
Housing Urban and Rular Development #11201687 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : 53.20 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
14.
Defence #11200251 Technical Bid
Tender For Provision Of Certain Sanctioned Works Under Ge South Bathinda At Bathinda Mil Stn.- 1 Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out And Getting Out In Soft / Loose Soil Complete All As Specified & Directed. 2 Removing Excavated Material Exc 1.50 Km N Exc. 5 Km And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And As Directed. 3 Excavation In Trenches Not Exceeding 1.5 Meter Wide And Not Exceeding 1.5 Meter Depth For Foundation Etc Or For Shafts , Wells, Cesspits, Manholes , Septic Tank, For Laying Of Cables , Laying Of Pipes Not Exceeding 10 Sqm On Plan And Not Exc 1.5 Meter Depth And Getting Out In Soft/Loose Soil Etc Complete All As Specified And As Directed By Engineer-In- Charge. 4 Material And Labour For Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 5 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 6 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 7 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Beams, Cantilevers, Bressummers, Lintels Over 1.5 M Span And The Like Etc Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 8 Material And Labour For Rcc M-25 (Design Mix) Using 20Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors,Roofs, Landings, Balconies,Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed By Engineer-In-Charge.Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 9 Material And Labour For Formwork Of Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 10 Material And Labour For Formwork In Square,Reactangular Or Polygonal On Rough Finished Surface Of Concrete To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And As Directed By Engineer-In-Charge. 11 Material And Labour For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 12 Material And Labour For Formwork To Soffits Of Suspended Slabs Such As Roof Slab, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 13 Material And Labour For Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors,Window Cills, Concrete Rail Ings, Openings In Concrete Walls, Floor And Roofs Not Exceeding 20Cm Wide And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10 Cm But Not Exceeding 20Cm Wide On Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 14 Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 15 Material And Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 16 Demolition Of Brick Work Or Stone / Boulder Masonry, Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars, Etc, In Any Description Complete All As Specified And As Directed By Engineer-In-Charge. 17 Material And Labour For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 18 Material And Labour For Brick Work With Fly Ash Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 19 Material And Labour Brick Work With Sub Class ‘B’ Old Size Burnt Clay Bricks Straight Or Curved On Plan Exceeding 6 Metre Mean Radius Built In Cement Mortar 1:6, Complete All As Specified And As Directed By Engineer-In-Charge . 20 Material And Labour For Brick Work With Fly Ash Old Size Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Walls Built In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In-Charge. 21 Demolition Of Cement Concrete (Unreinforced) In Ground Floor And Paving Not Exceeding 15Cm Thickness Below Or Above Ground Level Of Any Description And In Any Position Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge 22 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40 Mm Graded Stone Aggregate For Foundations, Fillings & Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 23 Material And Labour For Cement Concrete (1:5:10), Type E-2 Using 40 Mm Graded Stone Aggregate As In Filling Of Sunken Floors Complete All As Specified And As Directed By Engineer-In-Charge. 24 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Complete All As Specified And Directed. 25 Material And Labour For Waterproofing Treatment To Sunken Floor Using Acrylic Based Multipurpose Polymer. The Treatment Shall Be Carried Out As Per Manufactures Specification. The Treatment Shall Be Include Of The Following Elements Also: 1. Surface Preparation Of Substrate By Removing All Traces Of Contaminates, Loose And Friable Particles, Cement Laitance Oils And Grease, Water Repellent Coatings Etc2. Injection Grouting Using Cementitious Grout If Required. The Payment For Injection Grouting Shall Be Made Separately Etc3. Repair To The Substrate, Filling Of Blow Holes/Voids And Surface Leveling Using Appropriate Products Specified By The Manufacture.4. All Intersections Of Horizontal And Vertical Surface Should Be Profiled With A Mortar Fillet Of Minimum 25Mm X 25Mm.5. The Moisture Content Of The Substrate Shall Be Checked Before Application Of First Coat At Water Proof Coating At The Rate Of 200 G/M2 Followed Brush Topping At 450G/M2 Per Mm. The Second Coat Shall Be Reinforced With Glass Fabric Between The First And Second Coat.6. The Treatment Shall Be Protected By Application Of Polymer Modified Cement Mortar Of Thickness 10Mm Applied At The Rate Of 50G Per Mm.7. Tech Specification : Tensile Adhesion Strength 0.5N/Sqmm (As Bonding Slurry). 26 Material And Labour For Aerated Autoclaved Concrete (Aac) Blocks Work According To Indian Standard Specification Is:2185(Part-3)-1984 And Latest Revision Built In Cement And Sand Mortar 1:6 With Aerated Autoclaved Concrete (Aac) Blocks Straight Or Curver On Plan Exceeding 6Mtr Mean Radius As In Sunken Floor Complete All As Specified And And As Directed By Engineer-In-Charge. 27 Supply Only Integral Water Proofing Compound. 28 Removing Excavated Material As In All Kind Of Soils Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5M Above The Starting Point Complete All As Specified And As Directed By Engineer-In- Charge. 29 Returning Filling In Any Type Of Soil, Including Spreading, Levelling,Watering And Well Ramming In Layer Not Exceeding 25 Cm In Each Layer, Complete All As Specified And As Directed By Engineer-In- Charge. 30 Material And Labour For Sand Filling Under Floor Or In Foundation Including Spreading Levelling, Watering And Well Ramming In Layers Not Exc 25 Cmetc Complete All As Specified And As Directed By Engineer-In- Charge. Note: Sand Shall Be Approved By Ge. 31 Material And Labour For Hard Core Using Broken Stone Aggregate Of Gauge Not Exc. 63Mm, Deposited Spread And Leveled In Layers Not Exc. 150 Mm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed By Engineer-In- Charge. 32 Material And Labour For 75 Mm Thick Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Sub Base Of Floor. Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 33 Material And Labour For Rendering 10 Mm Thick In Cement Mortar 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Of Walls And Finishing The Surface Even & Fair Faces Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 34 Material And Labour For Rendering 5 Mm Thick In Cement Mortar In (1:3) On Ceiling And Finishing The Surface Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. 35 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 36 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Fair & Even Mixed With Liquid Water Proofing Compound As Per ManufacturerS Instructions But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. Note :- Liquid Water Proofing Compound Shall Be Measured And Paid Separately. 37 Supply And Fixing Chicken Wire Mesh ( Murga Jali ) In Cement Plaster Or Over Joints Of R.C.C And Brickwork Or As Per Site Requirement Of 24 Gauge & 12 Mm Mesh And 300 Mm Width For Construction Joints And Chasing In Brick Work For Electrical Conduits Or Water Supply Pipes And Pegs/Nails With Nailing Machine As Required Before Rendering / Plastering Etc. Complete As Per Site Requirement Complete All As Specified And As Directed By Engineer-In- Charge.Note: Rendering / Plastering Shall Be Measured And Paid Seperately Under Serial Item No. 5.00 Of ScheduleA Boq Here-In- Before. Nothing Shall Be Paid Extra On Account Of Rendering / Plastering In This Item. 38 Material And Labour For Applying Acrylic Wall Care Putty On Internal Surfaces And External Surfaces Of Walls/Ceilings/Soffits (Thickness Vary From 1.5 To 2.5 Mm As Required For Desired Smoothness And Leveling Of Surfaces In Two Or More Layers) By Using Ready Made Acrylic Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc Complete All As Specified And Directed By Engineer-In- Charge.Make Of Acrylic Wall Care Putty : As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After.Notes : (I) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. (Ii)The Make Of Acrylic Wall Care Putty Shall Be As Per The Recommendation Of Manufacturer Of Paint. 39 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 40 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying 01 Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Existing Shade @ 10 Sqm/Litre/1 Coat By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits ( Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc, Over Including A Coat Of Exterior Wall Primer @ 10 Sqm/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Including Removing The Vegetation Of Any Type And Description The Making The Surface Good Complete All As Specified And Directed. 41 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 42 M&L For Preparing Existing Treated Surfaces Of Ceiling Including Cornices And Applying Two Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And As Directed By Engineer-In-Charge. 43 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 44 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Interior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Including A Coat Of Exterior Wall Primer @ 11 Sq.M/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed. 45 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 46 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying One Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Approved Shade @ 5 Sqm/Litre/2 Coats By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer @ 11 Sqm/Litre/1 Coat Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits (Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed.Note For Item No 5 To 8 :- (A) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. 47 Material And Labour For For Preparing New Plastered Surfaces Of Ceilings And Applying Three Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The Last Two Coats Of White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And Directed By Engineer-In- Charge. 48 Material And Labour For Applying Three Coats Of White Wash On Newly Plastered Or Unplastered Ceiling Surfaces Including Preparation Of Surfaces, Complete All As Specified And Directed 49 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exc 1.5 Sqm Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 50 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4 Sqm Each Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 51 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat Of Size 45Mm X 70 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 52 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat With Double Rebate Of Size 65Mm X 125 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 53 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 54 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Decorative Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 55 Supply & Fixing Factory Made 30Mm Thick Solid Wpc ( Wood Polymer Composite ) Wiremesh Door Shutter Of Required Size Comprising Of Virgin Pvc Resin Of K Value 57-60 ( Suspension Rade ), Calcium Carbonate And Natural Fibers ( Wood Powders/ Rice Husk/ Wheat Husk ) And Non Toxic Additives, Made From Extrusion Process Wpc Foam Sheet Single Extruded ( Inner ) With Having Minimum Density Not Less Than 650 Kg/Cum , Having Good Screw Holding Capacity ( Screw Withdrawal Strength Of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Of 50 N/Mm2, Modulus Of Elasticity 850N/Mm2 And Resistance Of Spread Of Flame Of Class A Category With Property Of Being Termite/ Borer Free.Water/ Moisture Proof And Fire Retardant. Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted On Both Faces Of Shutter For Fixing Mosquito Mesh And Xtn Aluminium Mesh Together On Panel Area Of Door Except Stiles And Rails To Be Panelled With And Including Mesh With Self Tapping Round Headed Scresws At Required Distance, Screws And Edges Covered With Feathered Pvc Edge Beading All Around Of Mesh And Fixing Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws With And Including 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01 No. Of Helical Door Spring Of 300 Mm Length Complete All As Specified And As Directed By Engineer-In-Charge. Note: 1. Material Test Certificate Of All The Items And Authentication Should Be Compulsory Provided By The Manufacturing Company 2. The Rate Of 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01No. Of Helical Door Spring Of 300 Mm Length Is Inclusive In This Item And Nothing Shall Be Paid Extra On This Item..3. The Rate Of Mosquito Mesh And Xtn Aluminium Mesh Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 56 Supply And Fixing Factory Made Upvc White Colour Casement (Openable) Window (Area Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Each) Made Of Extruded Profiles With Wall Thickness Of 2.3Mm ( + – 0.2Mm). Window Profile With Hollow Section With Multi Chamber, Frame (60Mm X 58Mm), Sash (60Mm X 73Mm), T Profile (One Vertical Length In Between Two Shutters) (60Mm X 74Mm), Glazing Bead (35Mm X 20Mm) Will Be Mitered Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket 1.2 +– 0.2Mm Thick, Galvanized Steel Frame (28Mm X 21.5Mm), Sash (31Mm X 27.5Mm). T Profile (27Mm X 17Mm) To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8 Mm X 100Mm Long Fasteners. Hardware: [Casement Handle Made Of Zinc Alloyed (White Powder Coated), But Hinges OfZinc Alloyed (White Powder Coated), Transmission Gear Made Of Mild Steel With Multi Point Locking System] And 5Mm Thick Glazing With Selected Quality Glass.(Note: The Unit Rate Quoted By Contractor Excludes Cost Of Glass And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose.) 57 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-1 Using 20 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 58 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-2 Using 40 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 59 Demolition And Breaking Up Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete)Of Any Dia Set In Cement Laid In Trenches Incl All Fittings & Accessorises Complete All As Specified And As Directed By Engineer-In- Charge. 60 Supply & Fixing For 4 Mm Thick, Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 61 Supply & Fixing 4.0 Mm Thick Figured Glass Pin Head Type And Glazing With Oil Putty In Square N.Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed 62 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Not Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 63 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 64 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles, Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accourdingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (V)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill . 65 Supply & Fixing Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Stainless Steel Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 66 Supply & Fixing Galvanised Ms Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Galvanised Ms Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 67 Material And Labour For Providing And Laying Premium (1St Quality) Straight Edge,Stain Free, Glooss Finish, Square Marbonite Double Charged Vitrified Tiles Size In 600Mm X 600Mm X 9Mm To 10Mm Thick As In Floors Etc. Shade As Approved By Ge , Set And Jointed With Using Spacer And Approved High Polymer Modified, Grey Cement-Based Tile Adhesive Suitable For Fixing Medium Format Tile/Stone In Walls/Floor Conforms To Is 15477 : 2019 Type 2T “Adhesives For Use With Ceramic, Mosaic And Stone Tiles” Conforms To En 12004: 2017 And Is A Normal Cementitious Adhesives (C1) With Slip Resistance (T) Of Class C1 And Necessary Grouting As Per Manufacturer’S Instruction, Completed All As Specified And Directed By Engineer-In-Charge. 68 Supply And Fixing Anodised Aluminium Snap Grid Frame Work For False Ceiling 605Mm X 605 Mm Etc Complete All As Specified And As Directed By Engineer-In-Charge. 69 Supply And Fixing False Ceiling At All Heights With Grg (Glass Fibre With Reinforced Gypsum) False Ceiling Tiles Of Size 595 X 595 Mm Of Approved Tecture Design And Patterns Having Moisture Content Less Than 2% Humidity Resistance Of 99%, Nrc 0.50 To 0.75 As Per Is 8225:1987, Noncombustible As Per Bs 476 (Part 4)- 1970 And Light Reflectance Of 85%D (Minimum) To Be Laid In True Horizontal Level Suspended On Inter Locking Metal T-Grid Of Hot Dipped Galvanisezed Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 15 X 32 Mm Of Length 3000 Mm, Cross-T Of Size 15 X 32Mm Of Length 1200Mm And Secondary Intermediate Cross T Of Size 15 X 32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L Shape Level Adjuster Of Size 85 X 25 X 2Mm. Galvanized Iron Perimeter Wall Angle Of Size 24 X 24 X 0.40Mm Of Length 3000 Mm To Be Fixed On Periphery Wall I Partition With Help Of Plastic Rawl Plugs At 450 Tiles Fully Center To Center And 40Mm Long Dry Wall Wodd Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 70 Material And Labour Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Omplete All As Specified And As Directed By Engineer-In-Charge. 71 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accordingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Powder Coated Butt Hinges, Aluminium Handles, Aluminium Tower Bolts & Aluminium Peg Stays Shall Be Measured And Paid Seperately Under Respective Itmes Of ScheduleA Boq.(V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (Vi)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill 72 Material And Labour Anodised Aluminium Grill (Anodised Transparent Of Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer-In-Charge. 73 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 15Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 74 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 20Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 75 Supply And Fixing 16 Mm Bore Cpvc Pipe Sdr 11 With And Including Cpvc Sdr 11 Fittings And Fixed To Walls & Ceilings Or Laid In Floors, Complete Complete All As Specified And As Directed By Engineer-In-Charge 76 Supply And Fixing 20 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 77 Supply And Fixing 25 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 78 Material And Labour For Cutting Chases In Brick Wall , Pinning In. Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 Or Pcc 1:2:4 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Exc 10 Cm But Not Exc 20 Cm Girth Complete All As Specified And As Directed By Engineer-In- Charge.. 79 Supply And Fixing In Repair Brass Chromium Plated Wall Mixer For Mixing Hot & Cold Water Screwed Down, Screwed For 15Mm Bore Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 80 Supply And Fixing In Repair Bib Taps Cost Copper Alloy With Crutch Or Butterfly Handle , Screwed Down , Chromium Plated Screwed For Iron Pipe Or Brass Ferrul For 15Mm Bore Dia Pipe Complete All As Specified And Director. 81 Supply And Fixing In Reapir 15Mm Bore Bib Tap, Long Body, Fancy Type, Chromium Plated, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 82 Supply And Fixing In Repair 15Mm Bore Stop Valves, Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type) Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed For Iron Pipe Or For Brass Ferrule Complete All As Specified & Directed By Engineer-In-Charge. 83 Supply And Fixing In Repair Angular Stop Cock With Wall Flange, Fency Type Chromium Plated Cast Copper Alloy Screwed Down, High Pressure, Screwed One Ends For 15Mm Bore Of Iron Pipe Or For Union And Fixed In Position Complete All As Specified & Directed By Engineer-In-Charge. 84 Supply And Fixing In Repair Vitreous China Wash Hand Basin, White, Flat Back, Size 450Mm X 300 Mm Including Cast Iron Cantilever Bracket With And Including 32 Mm Dia Brass Waste Coupling And With And Including Fixing Of Waste Fitting And Union Complete All As Specified And As Directed By Engineer-In-Charge. 85 Supply And Fixing In Repair Ptmt Mirror Cabinet Of Size 380Mm X 450Mm Best Quality Confirming Ot Sample Kept In GeS Office Complete All As Specified And Directed By Engineer-In-Charge. 86 Supply And Fixing In Replacement Sink With Drainage Board Made Of Stainless Steel 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X460Mm Bowl Size 410Mm X330Mm X160Mm Complete All As Specified And As Directed By Engineer-In-Charge. 87 Supply & Fixing In Replacement Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed For Iron Pipe 15Mm Bore Complete All As Specified And As Directed By Engineer-In-Charge. 88 Supply And Fixing In Repair Stainless Steel Plate Rack Of Size 900Mm X 600Mm X 250Mm And Thickness Of Stainless Steel Strip Of 1Mm Fixed On Wall Etc. Complete All As Specified And Directed . 89 Material And Labour For Cutting Holes In Brick Walls Built In Cement Mortar (Not Exceeding Half Brick) For Inserting Hold Fast And Making Good Dismantled Portion In Cm 1:3 Or Cement Concrete 1 : 2 : 4 , Type B1 As Required , Depth Of Embedded Portion Exceeding Half Brick Walls And Not Exceeding One Brick Of Hold Fast Or Lugs Measured From The Face Of The Jamb Into Walls Complete All As Specified And As Directed By Engineer-In- Charge. 90 Material And Labour For In Repair Vitreous China Wash Down Water Closet Pan Wall Hanging Single Piece (With And Including Flushing Cistern Ewc) P Trap, With And Including White Coloured Closed Pattern Plastic Seat Cover, Hand Faucet , With And Including Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And As Directed By Engineer-In- Charge. 91 S & F In Repairs Cp Stainless Steel Grating (With Or Without Waste Hole), 125Mm Size, Fixed On Floor/Nahani Gully Trap Traps Etc Complete All As Specified And Directed. 92 S&F In Repair 25Mm Dia And 1Mm Thick Stainless Steel Drapery Rod Including With Bracket / Wall And Other Side Fancy Knobs At Both Ends As Approved By Engineer-In-Charge/Ge Including Taking Down Old Existing Rod/Pelmet With Accessories Complete All As Specified. 93 Supply And Fixing Cp Brass Fancy Type Corner Glass Shelf (25Cm/30Cm ) With Cp Brass Bracket & Railing Etc. Complete All As Specified And As Directed By Engineer-In- Charge. 94 Supply And Fixing In Repair Stainless Steel, Chromium Plated, Decorative Type, Soap Dish Holder Of Approximate Size 160Mm X 160Mm X 90 Mm Fixed To Wall With Rubber Plugs Complete All As Specified And As Directed By Engineer-In-Charge. 95 Supply & Fixing In Replacement Brass Chromium Plated Tubular Towel Rail 20Mm Dia D Type, 600Mm Long Between Flanges Fixed To Plug , Bracket With Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. 96 Supply And Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Pipes Single Socket 6 Kg/Sq Cm In Any Length With Stack Clamps Made Out Of 50Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge. Including Taking Down Old Ac Eaves Gutters And Rainwater Pipes ( Of Any Size And Pattern), Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 97 Supply & Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Ring Fit Pipes Single Socket In Any Length With Stack Clamps As Shown In Btd Drg No. 916 Sheet 1/4 To 4/4 And Btd-917 Sheet Sheet 1/1 Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge Including Taking Down Old Ac Eaves Gutters And Rain Water Pipes ( Of Any Size And Pattern) Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 98 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 100 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 99 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 75 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 100 Supply And Fixing 110 Mm Bore, Pvc (Swr) Fittings Type -B Such As Bends, Tee, Shoe Etc; Fixed To Pvc Pipes, Compete All As Specified And As Directed By Engineer - In-Charge. 101 Supply & Fixing 110Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified And As Directed By Engineer-In- Charge. 102 S&F 110 Mm Bore Of Pvc (Swr) Bends And Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 103 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Single Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 104 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Double Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 105 S&F 75 Mm Bore Of Pvc (Swr) Bends & Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 106 S&F In Repairs Pvc (Swr) Gully Trap Of Size 150 X 150 Mm, Square Or Round Mouthed, Type P Setting And Jointing With Solvent Cement Complete All As Specified And Directed. 107 Supply And Fixing In Repair Pvc (Swr) Type -B Floor Trap Any Type (Q, S, P), 110/75Mm Dia With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregate Complete All As Specified And Directed By Engineer-In- Charge. 108 Supply And Fixing In Replacement 10 Litres Capacity Pvc Valveless Syphonic Action Type Low Level Flushing Cistern White With Inlet, Ball Valve, Float, Handle Including Brackets And 32Mm Dia Pvc Flush Pipe Complete All As Specified And Directed By Engineer-In-Charge. 109 S&F In Repair Vitreous China Wash Basin, White, Oval Type , Size 450 Mm X 300 Mm Fixed On And Including Cast Iron Cantilever Bracket, 32 Mm Dia Brass Waste Coupling And Including Fixing Of Tap, Waste Fitting And Union Complete All As Specified And Directed. 110 Supply & Fixing In Repair Chromium Plated Square Shower Rose 200Mm X 200Mm Size, With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union For 15Mm Bore Of Pipe Complete All As Specified And As Directed By Engineer-In-Charge. 111 Supply & Fixing In Repair Pvc Connections 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified And As Directed By Engineer-In-Charge. 112 Supply & Fixing In Repair Pvc Waste Pipe With Socket Suitable For Connection To Waste Fittings Of 32/40Mm Dia, And Of Length Minimum 75 Cm Complete All As Specified And As Directed By Engineer-In-Charge. 113 Supply And Fixing In Replacement Three Layers 500 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 114 Supply And Fixing In Replacement Three Layers 1000 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 115 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of Size 20 Mm Bore (Minimum Weight 20Mm-210 Gram) Complete All As Specified And As Directed By Engineer-In- Charge. 116 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 20Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 117 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 25Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 118 Supply And Fixing In Replacement Bevelled Edge Mirror Selected Quality 5Mm Thick Glass Mounted And Fixed To With Chromium Plated Brass Screws And Cup Washers, With And Including Pvc Frame Around Made Of Pvc Channel, Complete All As Specified And Directed By Engineer-In-Charge. 119 Supply And Fixing In Repairs Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And As Directed By Engineer-In- Charge. 120 Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 121 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Permises Etc. Complete All As Specified And Directed By Engineer-In-Charge. 122 M&L For Pcc (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Floor Surface Finished Fair 30 Mm Thick Below Tiles Complete All As Specified And Directed. . 123 M & L Non-Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over & Including 15Mm Thick Screed In Cm 1:6 Complete All As Specified And Directed. 124 Material And Labour 25Mm Thick Cement Concrete Type B-1, 1:2:4 (12.5 Mm Graded Stone Aggregate) As Floors, Sub-Floors Etc And Finishing Surfaces Of Concrete Topping As Even & Fair Or Even & Rough To Receive The Topping Layer Complete All As Specified And Directed By Engineer-In-Charge. 125 Material And Labour For Double Charge Vitrified Ceramic Tiles ,Stain Free, Having Size Not Less Than 600X300Mm And 8 Mm Thick, Premium (1St Quality) Straight Edge, Colour As Approved By Ge , As In Vertical Surfaces Such As Skirting , Set And Jointed In Neat Cement Slurry And Laid Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In- Charge. 126 Material And Labour Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Pillars,Win Dow-Cills, Cooking Platforms And Like In Laid Over And Including 15 Mm Thick Screed In Cement Mortar (1:4) And Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Marble Shade And Roundening To The Edge Of Stone Slabs On Edges Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 127 Dismantling Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid Dry Or Bedded And Pointed In Any Mortar Complete All As Specified And As Directed By Engineer-In-Charge. 128 Demolition Of Cement Concrete Reinforced Of Any Discription And In Any Position, Including Reinforcement Cut As Required To Facilitate And Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge. Note:The Weight Of Scrap Iron For Schedule Of Credit Shall Be Ascertain By Boo As Ordered By Ge.The Copy Of Boo Duly Countersinged By Ge Shall Be Enclosed With Final Bill. 129 Material And Labour For Reinforced Cement Concrete, Nominal Mix,1:2:4, Type-B1, Using 20 Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Including Proper Compaction By Using Mechanical Viberator Complete All As Specified And Directed. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 130 Supply And Fixing Pvc (Hdpe) Swr, 110 Mm Bore, Single Socketed In Any Length With Rubber Ring Joints Using Solvent As Per Manufacture Instruction, Fixed To Walls Complete All As Specified Including Fixing Of Pipe To Wall With Flat Irons Clamps Of Size 25 X 3 Mm, Bolts, Washers, Nuts, Nails Etc, After Taking Down Existing Damaged Rain Water Pipe Complete All As Specified And Directed 131 Material & Labour For In Repair 75 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 132 Material & Labour For 100 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 133 Material And Labour For Water Proofing Tratment To Roof / Terrace (Material Of Water Proof Treatment As Approved By Ge) Single Component, Acrylic Based, Flexible, Micro Fibre Reinforced Waterproofing And Heat Reflective Coating System. The Treatment Shall Be Carried Out As Per The Manufacturers Instructions And Shall Include The Followings:(A) Preparation Of Substrate And Cleaning It Off All Loose And Triable By Mechanical Means(B) Open The Cracks Lines To Form , V Grooves With Cutter/Hammer/Chisel Up To 5-10Mm And Filling With Crack Filler And Pu Sealant.(C) Application Of Primer Coat @ 0.2 To 0.3 Kg/ Sqm Followed By The First Coat @ 0.75Kg/ Sqm.(D) The Second Coat Shall Be Applied @ 0.75 Kg / Sqm And Reinforced With Fabric Re-Inforcement Between The First And Second Coat.(E) The Top Coat Of Primer Shall Be Applied After The Second Coat Dries Off @ 0.05-0.08 Kg Per Sqm.(F) The Material Shall Adhere To Following Specification. Technical Specification Of Materialtensile Strength 1.5 Mpa Astm D412Elongation At Break > 200% Astm D412Adhesion In Peel > 1.5 Mpa (On Concrete Substrate) En 1542Crack Bridging Ability Passes Upto 3.2Mm Width Astm C1305Permeability To Water Vapour Passes Is 2645Water Vapour Transimission ~ 23 G/M²/24Hr Astm E96Water Absorption 134 Material And Labour For 40Mm Average Thick Pcc Padding In 1:2:4 Type B-1 (Using 20Mm Graded Stone Aggregates) As In Roof Slab Finishing The Surface Even And Fair Using Liquid Water Proofing Compound Complete All As Specified And Directed. Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 135 Material And Labour For Making Benching With Pcc 1:2:4 Type- B0, Using 12.5Mm Graded Stone Aggregates Using With Liquid Water Proof Compound As Per ManufacturerS Instruction Along Side Wall Adjoining To Roof In Concave Shape Complete All As Specified And Directed. Note : Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 136 Material And Labour For Cement Concrete 1:2:4 , Type B-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 137 Material And Labour For Water Proofing Compound Complete All As Specified And Directed. 138 Supply And Laying Dwcpe (Sn 8) Drain Pipes 150 Mm Nominal Dia As Per Is-16098 (Part-Ii), Laid In Trenches On Bed Including All Accessories/ Fittings/ Jointed Ring, Jointing And Testing Complete All As Specified And As Directed By Engineer-In- Charge.Note:- Excavation , Earth Work, Bedding And Pedestal / Anchorage If Required Shall Be Measured And Paid Separately Under Appropriate Item Of Boq/ Sch A 139 Material And Labour For Pcc (1:3:6) Type C-2 Using 40 Mm Graded Stone Aggregates As In Concrete Bed Of Sgsw Drain Pipes Of 150 Mm Bore, Laid To Required Slope Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested Complete All As Specified And As Directed By Engineer-In-Charge. Note :- (I) Thickness Of Concrete Bed Below The Barrel Of Pipe Shall Be 10 Cm. (Ii) Width Of Concrete Bed Shall Be Outer Diameter Of Drain Pipes (Not Of Sockets / Collar) Plus 30Cm. 140 Material & Labour For Antitermite Treatment Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc. In Apron/Plinth Etc., Complete All As Specified And As Directed By The Engineer-In-Charge. 141 Material And Labour For Att At Points Of Contact Of Wood Work By Chemical Emulsion (In Oil Or Kerosene Based Solution) @ 0.5 Litre/Hole By Drilling 6Mm Dia Holes At A Downward Angle Of 45 Degree At 150Mm Centre To Centre And Sealing The Same Complete All Sepecified And Directed By Engineer-In-Charge. 142 Material And Labour For Att Of Soil Under Existing Floors Using Emulsion @ One Liter Per Hole, 300Mm Apart Including Drilling And Plugging 12Mm Dia Holes With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To Match The Existing Floors Complete All Sepecified And Directed By Engineer-In-Charge. 143 Material And Labour For Writing Letters Or Figures (Block,Roman, Italic Ot Indian) Of Any Description, Not Exceeding 30Cm High With Paint Complete All Sepecified And Directed By Engineer-In-Charge. 144 Material And Labour For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement Concrete 1:2:4 Type B-L Smooth Finished, And Reforming Benching As Required For Internal Dia Of Pipe In 150 Mm Complete All As Specified And As Directed By Engineer-In-Charge. 145 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 146 Material And Labour For 15Mm Thick Rendering In Cm (1:6) (Internal Surface) On Other Than Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Even & Smooth But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 147 Material And Labour For Factory Made,Machine Pressed Precast Interlocking Paver Block 60 Mm Thick With Grey Cement And No Pigment, Any Shape And Size, Conforming To Is 15658-2006, Made Out Of M-35 Grade Concrete Laid Over Sand Cushioning Complete All As Specified And As Directed By Engineer-In- Charge. Note: The R Sand Cushioning Shall Be Measured And Paid Seperately Under Appropriate Item Of Schedule A Boq. 148 Dismantling Of Brick Tiles Or Terracing Tiles Single Layer On Roof & Disposal Of Retrieved Material Upto A Distance N.Exc 100M Where Directed, Complete All As Specified And Directed By Engineer-In- Charge. 149 Demolition Of Mud In Roofs, Any Thickness, Including Plastering And Leeping (Whether Full Thickness Removed Or Only A Part Thereof Disposal Off Rubbish Upto A Distance Not Exceedomg 500.00Mtr Where Directed ) Complete All As Specified And Directed By Engineer-In- Charge. 150 Material And Labour For 15Mm Thick Screed Bed Or Bedding Layear In Cement Mortar 1:4 On Roof Surfaces, Parapet Or Vertical Beam Surface (Horizontal Or Vertical) Finishing The Surfaces Even And Fair Complete All As Specified And Directed By Engineer-In-Charge. 151 Supply And Fixing Anodised Aluminium Handle, Fabricated Type 150Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 152 Supply And Fixing Aluminium Anodised Barrel Tower Bolt Of Extruded Section, 200Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 153 Supply & Fixing Aluminium Anodised Sliding Door Bolts 300Mm Long, With Hasp And Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified & Directed By Engineer-In- Charge. 154 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer Without Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 155 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer With Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 156 Supply Only 3.00 Mm Thick Sheet Glass Ordinary Quality ,Fixing With Oil Putty To Wooden Or Steel Surface N.Exc 0.5 Sqm Each Complete All As Specified And Directed 157 Material & Labour For Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In- Charge. Complete All As Specified And Directed By Engr-In-Charge. 158 Supply And Fixing For Mild Steel Screw Bolts 5Mm To 10Mm Dia Of Neck (Machine Made) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long Complete All As Specified And Directed By Engr-In-Charge. 159 Supply And Fixing For Pre -Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thickness Of Any Colour Having Atensile Strength Of 550 Mpa As In Roof Covering Fixed With L Type Or J Type Or Cranked Hook Bolts All As Specified And Directed By Engineer-In-Charge. 160 Material And Labour For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed By Engr-In-Charge. 161 Material And Labour For Steel Work In Tubular Post 100Mm Dia Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161- 1979 Grade St.-240 Including Rolled Mild Steel Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connecting Plates, Etc. (Cut To Ordinary Lengths I.E. Within 20Mm Of The Length Indicated Of Gde Fe 410 -S, Complete All As Specified And Directed By Engr-In-Charge. 162 Supply And Fixing In Repairs Magic Eye For Flush/Panelled Door Shutter Etc Complete All As Specified And As Directed By Engineer-In-Charge. 163 Supply And Fixing Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) Andhanging; Also Fastening And Fixing Complete Complete All As Specified And Directed By Engineer-In -Charge. 164 Material And Labour For Preparation Of New Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over With And Including One Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And As Directed By Engineer-In-Charge. 165 Material And Labour For Preparing Old Steel Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And As Directed By Engineer-In- Charge. 166 Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And As Directed By Engineer-In- Charge. 167 Supply & Fixing 18Mm Thick Hdhmr Board Uv Coating, Exterior Grade As Approved By Ge, With And Including Acrylic High Gloss Sheet Of Min 1Mm Thick Over Hdhmr Board, Anti Fungal, Moisture Resistance, Anti Borer, As Per Is 14587 For Frame And Shutter For Kitchen Cabinets / Cupboards (Such As Side Wall, Shutter, Partition Back Side Of Etc. Of Cupboard And Cabinets). Complete All As Specified And Directed By Engg-In-Charge. 168 Supply & Fixing In Repairs Of Stainless Steel Cabinet / Drawers Handle Having A Length Of 250Mm And Shape Complete All As Specified And Directed. 169 Supply & Fixing In Repairs Of Partial Overlay / Fully Overlay Hydraulic Self Closing Concealed Hinges Having Size 103Mm X 64Mm Finish Of Nickel/Silver As Approved By Ge Complete All As Specified And Directed By Engg-In-Charge. 170 M&L For 40Mm Gi Pipe Medium Grade Made To Shape As In Spout Pipe As In Sunken /Verandah/ Balconey Complete All As Specified And As Directed. 171 Supply And Laying Or Fixing Or Laid In Trenches/ Ducts/ Through Pipes/ In Floors / Under Roads/ Hard Standing /Along Poles And Testing Lt Cable Xlpe, Pvc Insulated Screened, Bedded, Galvanised Steel Strip Or Wire Armourd Cable (Heavy Duty) 1100 Volt Grade With Aluminium Conductor Having Cross Sectional Area 70 Sqmm X 3.50 Core Conforming To Is-7098 (Part-I -1988) Complete All As Specified And As Directed By Engineer-In-Charge. (Excavation And Earth Work, Sand Cushioning & Gi Pipe Shall Be Measured And Paid For Separately) 172 Taking Down Carefully Copper /Aluminium Point Wiring (Light, Fan, Socket Or Power Point ) Complete Including Fitting Such As Hylem , Sheet Switches, Ceiling Rose, Pendent Holder , Sockets, Fan Regulator , Bell Push, Electronic Bell , Sunken Box Except Concealed Conduit Etc. Complete All As Specified And Directed By Engineer-In-Charge. Notes:(I) The Weight Of Aluminium Scrap , Copper Scrap And Iron Scrap Shall Be Ascertained By Boo As Ordered By Ge And Same Duly Countersinged By Ge Shall Be Enclosed With Final Bill. (Ii) The Rate Of Cutting Chases (As Required) And Making Good Surfaces To Match With Adjoining Surface Shall Be Measured And Paid Seperately Under Serial Item No. 173.00, 174.00, 175.00, 176.00, 177.00, 178.00, 179.00, 180.00, 181.00, 182.00, 183.00, & 184.00 Of Boq. 173 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps One Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 174 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps Two Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 175 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Same Board Complete All As Specified And As Directed By Engineer-In- Charge. 176 All As Per Item No 17400 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 177 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 5/15 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 178 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Bell/Buzzer Point Controlled By One Push Button On Independent Board But Not Below The Switch Board, Complete All As Specified And Directed By Engineer-In-Charge. 179 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Socket Outlet 3 Pin 6 Amp On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. 180 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For 15/16 Amp Socket Out Let By Using 2.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 181 Material And Labour For Point Wiring For One Light / Fan Point Controlled By One Switch With 1.5 Sqmm (Nominal Area) Pvc Insulated Unshealthed Multi Stranded Copper Conductor Cable Fr-Lsh In Existing Conduit And Provision Sunken Boxes But Inclyding 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point Controlled By One Switch And Fan Regulator Including Pvc Insulated Unshealthed 1.5 Sqmm Copper Conductor Cable Fr-Lsh Connected To Common Earth Dolly Complete All As Specified And Directed 182 All As Per Srl Item No 181.00 (Here-In-Before) But Socket 3 Pin 5 Amp 230 Volt Flush Type On Same Board 183 All As Per Srl Item No 181.00 (Here-In-Before) But For One Socket Point Outlet 3 Pin 5 Amp In Incdependent Board 184 All As Per Serial Item No 181.00 Of Boq Here-In-Before But For 15 Amp Socket Out Let By Using 1.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 185 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 5 Amp Complete All As Specified 186 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 15 Amp Complete All As Specified 187 Supply And Fixing Socket Outlet 3 Pin, 5 Amp Flush Type All As Specified 188 Supply And Fixing 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Complete All As Specified 189 Supply And Fixing Modular Switch One Way , 6Amp/10Amp ,1 Module, Single Pole, 250 Volts ,Ac Supply, Isi Marked , Complete All As Specified And Directed By Engineer-In-Charge 190 Supply And Fixing Modular Socket Outlet , 6 Amp-2/3 Pin Combined 2 Module , 230 Volts , Multipurpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 191 Supply And Fixing Modular Switch One Way 16 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 192 Supply And Fixing Modular Switch Two Way 6 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 193 Supply And Fixing Modular Bell Push Switch 6A 1 Module , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge.Note: (I) Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 194 Supply And Fixing Modular Socket Outlet 6Amp/16Amp-2/3 Pin Combined,2 Module ,230 Volts ,Multi Purpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 195 Supply And Fixing Fan Regulator, Modular Type, 5 Step, High Speed, Two Module Complete All As Specified And Directed By Engineer-In-Charge. 196 Supply And Fixing Ceiling Rose 3 Terminal Flush Type 6 Amp 250V ,Isi Marked ,Ac Supply, Topline Series With Polycarbonate 20Mm X 50 Mm Two To Three Terminal, Complete All As Specified And Directed By Engineer-In-Charge. 197 Supply And Fixing Electric / Electronic Bell, Ding Dong Type 230 Volt Ac Supply,Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 198 Supply And Fixing Wall Mounted Extruded Aluminium/Polycarbonate Led Batten Fixture T8(G13 Holder) 1.2 M Including One Led Retrofit Tube 20(±10) Watt. 1.2 M T8 6500 Efficacy Not Less Than 90 Lumen/Watt Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete Including Making Connection Complete All As Specified And Directed 199 Supply And Fixing Lamp Holder ,Isi Marked Of Pvc/Polycarbonate Type With Back Plate Suitable For Batten Fitting With And Including 9Watt Led Retrofit Lamp (Base B-22) Complete All As Specified And Directed By Engineer-In-Charge. 200 Supply And Fixing Lamp Holder Pvc/ Polycarbonate Type With Back Plate Suitable For Batten Fitting With Led Bulb 5 Watt Lamp Base- B-22 Complete All As Specified And As Directed By Engineer-In- Charge.Note: Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 201 Supply Only Led Bulb 9 W (Suitable For B22 Base), 250V Ac, Green/Red/ Clear Day Light ( Cdl) In Colour Complete All As Specified And Directed By Engineer-In-Charge.As Per Direction Of Engineer-In-Charge Colour Of Led Luminiure Cdl/Warm White Shall Be Provided By The Contractor As Per Site Requirment And Nothing Shall Be Paid Extra On This Account.Notes:(A) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Led Bulb Complete Including Lamp/ Strip From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led Bulb . (B) All Led Bulbs Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (C) Scope Of Work Shall Include To Fix Led Bulb Walls/Ceiling Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account.(D) Old Unservicable Retrieved Material Shall Be Deposited In The Store Yard Of Age E/M Ge (North) Bathinda By The Contractor His Own Arrangements And Nothing Shall Be Paid Extra On This Account. (E) The Rate Of Electric Connection Connecting With Using Flexible Copper Wire Twin Core Upto Ceiling Rose/Connector Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 202 Supply And Fixing In Replacement Led Panel Light Fitting Recessed Mounted,Square Shaped Of Size 600Mm X 600Mm , 36 (±10%) Watt, Efficacy Not Less Than 100 Lumen/Watt , Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete As Per ManufacturerS Instructions With And Including Connection With Flexible Twin Core Copper Cable Of Size 23/.00076 From Ceiling Rose To Fitting Complete All As Specified And As Directed By Engineer-In- Charge. 203 Material And Labour In Replacement Sub Main Wiring Complete With Two Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh With And Including Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh For Earth Wire In Existing Pvc Concealed Conduit (Colour Code Phase-Red, Neutral-Black And Earth As Green) Complete All As Specified And Directed By Engineer-In-Charge. Notes:-(A) Three Single Core 6 Sqmm Frlsh Pvc Insulated Unsheathed With Multistranded Copper Conductor Cable 1100 Volts Grade Shall Be Measured As One Length. 204 Supply And Fixing In Replacement Mcb 40Amp -63 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 205 Supply And Fixing In Replacement Mcb 6Amp -32 Amp Sp ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 206 Supply And Fixing In Replacement Mcb 32 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 207 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 8 Way 240 Volt, Ip -54, 200 Amps Rated Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 208 Supply And Fixing Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 12 Way 240 Volt, 200 Amps Rated Copper Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 209 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Ip-54 Protection, Flush Mounted For Metal Door, Powder Coated Db Tpn 4 Way, 415 V Ac With 63 Amps Rated Bus Bar, Double Door, Dust And Vermin Proof Suitable For Incorporation Of Incoming Mccb And Outgoing Mcb Sp/Tp And Earth & Neutral Bus Bar Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 210 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 20 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 211 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 25 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 212 Supply And Fixing Led Batten Fitting 1X10 Watt, 6500K, 2 Ft Complete With Decorative Ultra Slim Square Profile Led Lighting Fixture With Extruded Polycarbonate Environment Friendly, Energy Efficient Complete With All Light Connection All As Specified And Directed 213 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminium Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Complete With Ip 65/66 Protection Including Fixing With Gi/Ms Bracket Made Out Of Suitable Size Of Light Grade Tube Upto 1.2 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Iron With Suitable Bolt And Nuts Complete With Making Connection Complete All As Specified And Directed 214 Supply & Fixing Building Security Led Light Of 35 Watt , Ip 66 , Luminaire With High Power With Toughened Glass Complete As Per ManufacturerS Instructions With And Including Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt ,Nuts And Washers Complete And Fixing To Wall / Column With And Including Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size And Testing Complete All As Specified And Directed By Engineer-In-Charge. Notes:(A) The Rate Of Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt And Nuts And Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (B) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Security Led Light Fittings Complete Including Lamps From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led /Luminaries. (C) All Security Led Light Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (D) Scope Of Work Shall Include To Fix Security Led Light Fittings Walls/Building Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account. 215 Supply And Fixing Jointing Of Double Walled Corrugated Pipe (Dwc) As Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 216 Supply And Fixing Jointing Of Snap Fit Coupler For Double Walled Corrugated Pipe (Dwc) Of Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 217 Supply And Fixing Mccb With Adjustable Type, 4 Pole, 63 Amps, 415 Volts, 50 Hz, 25 Ka And Including Sheet Metal Enclosure Out Door Type Made Out Of 3.15 Mm Thick Crca Sheet Mounted On Angle Iron Padesta Including Grouting Complete All As Specified And Directed By Engineer-In-Charge. 218 Material And Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600Mm X 600Mm X 6 Mm Thick Burried Directly In Ground To Depth Of Pit Not Less Than 2.25 M Below Normal Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Normal Ground Level Surrounded From All Sides By 15 Cm Thick Packed Layer Of Charcoal / Coal Dust And Common Salt Filling In Alternate Layers And Connected To Galvanised Earth Lead Wire 4 Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Gi Or Steel Including Gi Protection Pipe 15Mm Dia Light Grade Upto The Extent Of 7.5 Metre And Connecting To Earthing Test Point, Main Switch Board Including Gi Pipe 20 Mm Dia Light Grade For Watering, Ms Funnel And Bringing Out The Watering Pipe Upto 30 Cm Above The Normal Ground Level Plugged At Top Including All Fitting Including Pcc Earth Pit With Pcc 1:2:4 Type B-1 Using 20Mm Graded Stone Aggregate And Rcc Pit Cover Including Necessary Earthwork And Excavation In Any Type Of Soil Complete All As Specified As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion. Note:- (I) Earth Continuity Of Gi Wire 4 Mm Including Protection Pipe Up To 7.5 Mtrs From Earth Electrode Will Be Included In Unit Rate, Complete All As Specified And Directed. (Ii) The Rate Of Earth Work In Soft/Loose Soil I.E. Excavation, Returing Filling And Removal, Form Work Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) Pcc Chamber Shall Be Constructed At Least 1.5 Metre Away From The Earth Electrode And Pipe For Watering Shall Be Provided In Slanting Manner. (Iv) The Earth Testing Arrangement Should Be Done By The Contractor As Per Direction Of Engineer-In-Charge. 219 Supply And Fixing 1100 Volts Grade Heavy Duty Cable Pvc Insulated Aluminium Strandred Conductor 6Sqmm, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers Not More Than 1 Mtr Apart Including 4Mm Suspenstion Wire, One Twin Core Cable Flat All As Specified And Directed 220 Supply And Fixing In Replacement Exhaust Fan 300Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 221 Supply And Fixing Exhaust Fan 250Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 222 Taking Down Unserviceable Complete Ceiling Fan Along With Blades And Deposited To Age E/M Store Yard Of Ge (South Bathinda) Complete All As Specified And Directed By Engr-In- Charge. 223 Supply & Fixing Ceiling Fan Of 1200Mm Sweep Complete With Blades, Down Rods, With And Including Remote Control, Single Phase, 50 Hz, Min Air Delivery 210 Cfm With Service Value 6.00 Bee. Five Star Rated With Brushless Direct Current (Bldc) Motor Connecting Up Complete With And Including Three Core Flexible Pvc Insulated Multi Stranded Copper Conductor Cable Of Suitable Size From Ceiling Rose / Connector, Including Extra Gi / Ms Pipe Down Rod, As Per Site Requirement , With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 224 Dismantling And Taking Down Of Existing Energy Meter And Refixing The Same Complete All As Specified And Directed By Engineer-In- Charge, 225 Dismantling And Taking Down Existing Geyser And Deposit In The Safe Custody / Store Yard Of Age E/M Of Ge (S) Bathinda And Refixing The Same After Carring Out Repair Work/ Rewiring Accn )Complete All As Specified And Directed By Engineer-In- Charge,
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
15.
Defence #11198549 AOC
Tender For Spl Repair To Certain Md Accn In Kandhar Line Under Ge Central Delhi Cantt-10; 1 Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc including remove alldebris at 2 KM away from site complete all as specified and directed. 2 M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces, applied in two layers i.e. 1st layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4 )mixed with WPCfinished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately) 3 M&L for rendering 10 mm thickin CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 4 M&L for rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 5 M&L for preparation of new plaster surfaces of wall and applying water proof wall putty 1-2 mm thickness over plastered surfaces to prepare the surfaces even and smooth and finishing walls with Two coats @ 1.67 ltr/10 Sqm each acrylic smooth exterior paint of required shadeover and including priming coat of exterior primer @ 2.20 Kg/10Sqm complete all as specified and directed. 6 M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified and directed. 7 M&L for Preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper complete all as specified and directed. 8 M&L for complete removal of existing treatment of old decorated plastered or unplastered surfaces of wall by rubbing , brooming down, washing with water etc and applying two coats of oil bond distemper complete all a specified and directed. 9 M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etc and providing and applying 1-2 mm thickness wall putty over plastered surfaces to prepare the surface even and smooth and finishing wall surfaces by applying Two coats @ 1.67 ltr/10 Sqm each with acrylic smooth exterior paint of required shade over and including priming coat of exterior primer @ 2.20 Kg /10Sqm complete all as specified and directed. 10 M&L for dismantling water tanks of capacity exc 250 litres & n. exc 500 litres complete all as specified and directed. 11 M&L for rotational moulded polyethylene water storage tanks (ISI Marked) white colour 500 litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball complete all as specified and directed. 12 S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 13 S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 14 Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. 15 Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) complete all as specified and directed. 16 Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting pointcomplete all as specified and directed. 17 M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone crushed aggregates) on roof padding, surface finished even and smooth without using extra cement complete all as specified and directed. 18 M&L for providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer or equivalent (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalentcomplete all as specified and as per manufacturers instructions. 19 M&L for providing and applying Smartcare Dampproof or equivalent, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per manufacturers instructions and all as specified & directed. 20 Supply only integral water proofing compound (ISI marked) complete all as specified and directed 21 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified and directed 22 M & L for brick work with Cement Mortar 1:6 using sub class B bricks, old size, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed. 23 All As per item no 22 before but except bricks etc complete all as specified & directed 24 Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed. 25 Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 26 Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 27 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 28 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 29 S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 30 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 31 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).Note: MTC and Screw Out Test shall be provided by Contractor 32 Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test shall be provided by Contractor 33 S&F Aluminium windowfor outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter(02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. 34 S&F Aluminium windowOuter frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter (02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm SS 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. NOTE:- For installation of windows AC/desert cooler the provn of window glass shutter with wire mesh,grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirementt during execution as direction of Engg-in-Charge. 35 S&F ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone complete all as specified & directed 36 Dismantling of wall and ceiling/cupboard board fibre pulp AC boards etc any thickness including cover fillets removing the wiring complete all as specified & directed 37 S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified & directed. Material test certificate and authentication should be compulsory provided by the contractor. (For WC/Bathroom/Toilet/Kitchen and Cabinets) 38 S&F stainless steel continuous (Piano) hinges, bright finish, width of flap when open 30mm, complete all as specified & directed. 39 S&F of stainless steel handles 100 mm sizefor kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. 40 S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. 41 S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws complete all as specified & directed 42 S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) complete all as specified & directed 43 S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) complete all as specified & directed 44 S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked) complete all as specified & directed 45 S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked) complete all as specified & directed 46 S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all as specified & directed. 47 M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed 48 M&L for preparation of Old or previously treated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed. 49 S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 1mm thick sheet complerte all as specified and directed. 50 S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed. 51 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm etc complete all as specified & directed 52 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm etc complete all as specified & directed 53 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 40mm etc complete all as specified & directed 54 Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed 55 All as per item No. 54here in beforebut 20 mm dia complete all as specified and directed. 56 All as per item No. 54 here in beforebut 40 mm dia complete all as specified and directed. 57 S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed 58 Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for concealed water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all as specified & directed. 59 Supply and fix in repairvitreous China wash hand basin (including pedestal)white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures complete all as specified & directed 60 Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe) complete all as specified and directed, 61 S&F in repair vitreous china wash down water closet EWC white/ ivory/off white (closedpattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flushpipe) complete in all respect complete all as specified & directed 62 Supply only PVC low level white flushing cistern valveless symphonic action type 5/10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified & directed 63 S&F in repairs 15 mm dia 600mm long PVC connectionswith brass check nut complete all as specified & directed 64 S&F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge. 65 S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railingcomplete all as specified and directed by Engineer-in-Charge. 66 S&F in repairsHealth faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. 67 S&F fancy type brass chromium plated toilet paper holder, complete all as specified & directed 68 S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified & directed 69 S&Fin repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 70 S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 71 S&Ffor 15 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 72 S&Ffor 20 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 73 S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed. 74 S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 75 S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture model Quarter half turn (SOLO) omplete all as specified & directed. 76 S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO) complete all as specified & directed 77 S&F in repairs Brass chromium plated mode 2 in 1 sink mixturemodel Quarterhalf turn (SOLO) ofas complete all as specified & directed. 78 S&F in repairs chromium plated soap dish fancy type complete all as specified & directed 79 S & F in repairtowel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embedded in cement mortar 1:3 with MS screws etc complete all as specified and directed. 80 Dismantling of floor of size not exceeding 4.00 Sqm each for EWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 4.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 81 Dismantling of floor of size not exc 1.50 Sqm for IWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 82 Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. 83 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over and including 15mm thick screed bedin cement mortar 1:4 set and jointedin neat cement slurry and pointed in coloured cement. complete all as specified and directed 84 S&F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.. 85 All as per item no. 84 here in before but on vertical surfaces as in skirting etc over and including 10mm thick screed bed in CM 1:3, set and jointed in white cement with pigment to match all as specified and directed. 86 M&L glazed ceramic coloured tiles in vertical surface600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 10mm thick in CM (1:3) complete allas specified & directed. 87 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc incl brushing neat cement slurry with 3.0kg of cement per sqmtr complete all as specified and directed. 88 M&L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes over and including cement mortar bedding of 20 mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. 89 M&L for machine cut kota stone slab flooring, and (one Pieces) as in tread, riser, landing, 20-25 mm thick over and including cement screed bed 20mm thick in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 90 M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete all as specified and directed Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. 91 M&L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water.All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint complete all as specified and directed. 92 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 93 M&L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and directed 94 M&L for 40 mm thick cement concrete 1:2:4type B0(using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fairusing extra cement, complete all as specified and directed 95 Demolition of reinforced cement concrete in any position complete all as specified and directed 96 M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone crushed graded aggregate) as in louvers and jallies 25mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown complete all as specified and directed 97 M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone crushed aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed. 98 Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed. 99 S&F TMTmild steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed. 100 Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter including bends complete all as specified and directed . 101 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete all as specified and directed . 102 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete all as specified and directed 103 S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete all as specified and directed. 104 S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete all as specified and directed. 105 S&F for PVC (SWR) door plates , Yjunction 110 mm bore complete all as specified and directed. 106 S&F for PVC (SWR) door plates ,T junction 110 mm bore complete all as specified and directed. 107 S&F for 100 PVC (SWR) bends with door plate& teecomplete all as specified anddirected. 108 S&F for 75 mm PVC (SWR) bends with door plate & tee complete all as specified anddirected. 109 S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified anddirected. 110 S&F in repair 20 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of Stainless Steel tubefor curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. 111 Dismantling wrought iron or mild steel work of any description not otherwise provided for parapet railing, balconies, tank staging, metre rooms shaft areaany descriptioncompleteas specified and directed. 112 Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm including welding complete all as specified and directed. 113 S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed 114 Dismentling asbestos cement corrugated orsemi corrugated sheets in roof fixed with L hook or cranked bolt complete all as specified and directed 115 S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge 116 S&F in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. 117 ROAD, PATH AND CULVERT 118 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 119 M&Lfor 75 mm thick PCCtype D-2 1:4:8 (40mm graded aggreate) as sub-base complete all as specified and directed 120 S&F Endura colour paving tiles 30cm X 30cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 121 M&L for Providing PCC in coping type B-1, 1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified and directed 122 M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed 123 SEWAGE DISPOSAL 124 Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified and directed 125 Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed 126 Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed complete all as specified and directed 127 M&L for PCC 1 : 4 : 8 type D2 using 40mm graded stone crushed aggregates as in foundation of manholes, posts etc completeall as specified and directed. 128 M&L for PCC 1 : 2 : 4 type B1 using 20mm graded stone crushed aggregates as in surfaces channels and drains complete all as specified and directed. 129 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified and directed. 130 S&F DWCPE(SN8) 150mm dia (Internal Dia)pipes, snap fit coupler and rubber ring including testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed. 131 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified & directed 132 M&L for Brick work with sub class ‘B’ bricks straight or curved on plan, built in cement mortar 1:4 using old size bricks complete all as specified and directed. 133 All as per item no 130 here-in-above but except bricks 134 M&L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Itemwater troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. 135 M&L for precast factory made manhole cover, area of each cover n.exc 0.60 Sqm, 100mm thick with SFRCconcretingincluding grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified and directed. 136 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia pipe, complete all as specified. 137 M&L for rendering 15mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound @ 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately. 138 Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),150 mm diapipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge 139 INTERNAL ELECTRIFICATION 140 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc 141 Taking down old MCCB , TPN DBs , SPN DBs (incl MCB SPN & SP) & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. 142 Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. 143 Disconnecting elect connection and taking down of ceiling fan/ Exhaust fanof any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge. 144 M&L for point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit of 20 mm nominal diaand conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and including provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel concealed in walls, with modular sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, complete all as specified and directed for the following:- 145 One light /Ceiling fan/exhaust fan point controlled by one switch. 146 One light point controlled by two, two way switch ( switch to be measured and paid separtely) 147 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. 148 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board 149 One bell point controlled by one bell push. 150 All as per item Ser No 142 here-in-before but point wiring with 2.5 sqmm single core FRLS 1100 Volts in New PVC concealed conduitmedium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm single core FRLS 1100 Volts copper conductor cableas earth continuityconnected to common earthfor one 15 A switch socket power point, complete all as specified and directed 151 M&L for submain wiring 4 Sqmm nominal cross sectional area,two single core, 1100 Volts grade, multi-stranded, PVC insulated unsheathed, FRLSHcopper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of suitable dia, medium grade with all conduit accessories and connected to common earth dolly to suitable copper lugs including all cutting/chases etc in walls and making good to the disturbed surfaces to match the existingsurfaces.Note:- Three run of single core wire andone run of conduit shall be measured and paid as one unit complete all as specified and directed 152 All as per item ser No 144 here-in-before but for 02 x 6 Sqmm for phase & neutral and 01 x 6 Sqmm for continuousearth wire concealed/surface 153 M&L for switch Modular type 6 Amp one wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110 154 M&L for switch Modular type 6 Amptwo wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 2573402/ Schnider Cat No X1002WH/Wipro Cat No RF 210 155 M&L for switch Modular type type 16 Ampone way,ISI marked complete all as specified and directedMake : Legrand Cat Part No 573410/ Schnider Cat No X11001WH/Wipro Cat No RF 130 156 M&L for Modular type socket outlet 2 in 1, 5 pin 6 Amp ,ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/Wipro Cat No R 1212 157 M&L for Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573471/ Schnider Cat No X2106WH/ Wipro Cat No R 1332P 158 M&L for ceiling rose 3 phase PVCpolycorbonate,isolated body, complete all as specified and directed 159 M&L for bell push,modular type, 6 Amp, 1 moduleISI marked complete all as specified and directed.Make : Legrand Cat Part No 573413/ Schnider Cat No X1005WH/ equivalent in Wipro 160 M&L for bell ding dong AC, 230 volts, single pole complete all as specified and directed. 161 M&L for angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete all as specified anddirected. 162 S&F LED bulb 12 watts, 1200 lumens output, 6500K suitable for B-22 base complete all as specified and directed. 163 M&L for earthing complete with GIelectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earthplate not less than 1.50 mtr below normal ground level connected to GI wire 4.0 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze drilled and screwed all as specified including excavation and earth work and disposal of surplus soil incl 15 mm GI tubing light grade and necessary fitting for protection of GI wire incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MSangle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised wire and protection light grade GI pipe upto 7.5 mtr, excavation, etc shall be deemed to be in the quoted rates. 164 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 08 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 165 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 12 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 166 S&FMCB confirming to ISI/IEC -60898-1 (2002), SPN, AC, 240 volts, of 40Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 167 S&FMCB confirming to ISI/IEC -60898-1 (2002), SP, AC, 240 volts, of 6-32Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 168 Supply and fix in replacement LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 120 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. 169 S&F in replacement of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. 170 M&L for in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate,Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 Including 12 W retrofit LED BULB (B-22 base). NOTE- one piece of LED bulb 12 watts included with city -1 fitting complete all as specified and directed. 171 Supply and fix in replacement 10 watts bulkhead fitting, IK 09 with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover,including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. 172 Taking down existing electric meter & refixing the same after completion of job with electric connection by 8 way DB in good way by cleaning and qtr No. marking complete all as specified and directed.. 173 Supply and fixingexhaust fansmetal body AC single phase 230/240 V of size300 mm sweep, Air flow rate > 900cum/min, Bird screen forprotectionagainst birds, double ball bearing, metal body with louvre also with louvre for fixing of exhaust fan complete all as specified and directed. 174 Supply and fixing new BLDC fan against old ceiling fans BLDC conversionthree blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5star rating for energy saving, rated Air delivery >220 cum/min,AC single phase 230/240 V of size 1200 mm sweep including fan regulators,down rod, canopy & all accessories including making connection with three core flexible, copper winding in fan,copper cable pvc insulated of suitable length, complete all as specified and directed. NoteBLDC Fan should work onelectronic fan regulator & also with remote controled. 175 S&F modular type sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall complete all as specified and directed. 176 S&F of water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity25 Ltrs, having heating element 1.5 KW and not less than 5 star rating,suitable for ,230 volt,50 Hz electric supply complete all as specified and directed . 177 S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed. 178 S&F in replacement pressure die cast aluminium housing LED street light luminaires with IP-66 deg. of protection suitable for 35 watt LED fitting, Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 duly fixed on 25 mm dia GI pipe light grade including 40 X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : Quoted rates shall be inclusive of all accessories like suitable GI pipe, 40x6 mm thick MS flat, fastner, nut & bolts, suitable length of flexiable wire etc. 179 S&F in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-43 protection), mechanical impactstrength IK - 09, with cement spill protector double doorfabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and12 Nos of SP MCB 10 to 63 Amps outgoing and conforming to HSN code : 8537 complete all as specified and directed. Note :- MCCB & MCB will be measured & paid separately. 180 S&F in replacement MCCB 125 Amps, thermal magnetic release,4 pole 16 kA ICS=ICU Complete all as specified and directed.
Contract Date: May 30, 2026 Contract Value : 3.02 Crore
Statutory Bodies & Commissions/Committees No of Bidders 11
16.
Defence #11191783 Price Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Any Guage, Thickness, Including Nainital Pattern Or Similar Pattern Roof Covering Complete All As Specified And Directed. , Demolition Of Brick Work Or Stone Masonry Precast Plain Cement Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster Of Any Description On Brick Or Plain Cement Concrete Blocks Or Stone Wall Or Concrete Surface Etc Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water Etc All As Specified And Directed. , Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And Directed. , Dismantling Timber Scantlings 40 Sq. Cm And Over In Section, In Any Position Complete All As Specified , Taking Up Or Down 15Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Taking Up Or Down 20Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Dismantling Water Tanks 500 Ltrs Capacity Complete All As Specified And Directed. , Dismantling Water Tanks Of Any Description, Capacity Exceeding 500 Litres But Not Exceeding1000 Liters Complete. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each.& Removing To Or From Store All As Specifed & Directed. , Taking Down Chowkats Or Frames Exc 1.5 Sqm But Not Exc 4 Sqm Each With Shutters (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , Dismantling Of Ceiling Board (Flbre Pulp, Insulation Etc) Or Insulation Boards/Slabs/Blankets Any Thickness, Including Cover Fillets Complete All As Specified And Directed. , S&F In Repairs Of Galvanised Mild Steel Wire Cloth 0.45 Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18Mm And Fixed With Tinned Tacks Or Galvanised Wire Staples Complete All As Specified And Directed. , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/Metal Frames, Glazed With Putty Or Fixed With Beads Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones All As Specified , S&F 4 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa (Az 150) As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F 0.63Mm Thick Galvanised Corrugated Ms Sheeting (Cgi Sheet Roofing) With Two Corrugation Side Laps, With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusive Fixed With Coach Screws And Washers As In Roofs Etc All As Specified , S&F 0.63Mm Thick Plain Galvanised Ms Sheeting Using Grade-O Sheets With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusives, As In Roof, Ridges, Hips, Valley Gutters, Drip And Straight Flashing Complete All As Specified And Directed. , S&F Of Powder Coated Grid Frame Work For False Celling Comprising Of The Following Sections For Making Partitions Of 600X600 Mm Size Fixed To Walls With Rawl Plugs & Screws And Hanged To Roof With And Including 4Mm Dia Gi Wire Suspender Of Suitable Length And Butterfly Clips, Size Of Main Tee Shall Be 28Mmx24mmx0.3Mm Thick , Cross Tee Shall Be 28Mmx24mmx0.3Mm Thick And Wall Angle Shall Be 24Mmx24mmx0.3 Mm Thick Incl 4 Mm Thick E-Board Classic (Make-Everest) For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Snap Grid As In Ceiling With And Including Dusting Of Surface Complete All As Specified And Directed.Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Using Old Size Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radius, Built In Cm 1:6 All As Specified And Directed. , M&L For Rendering 15 Mm Thick Readymade Plaster On Inner/Outer Walls By Adding 17-19% Of Potable Water By Weight Of Material For Thickness Above 15Mm It Is Recommended To Be Applied In Multiple Layers. Ready Mix Plaster Shall Complies With Is 1661-1972, Is 2250-1965, Is 2402-1963 And Confirms The Compressive Strength @ 28 Days 10-12 Mpa/Bulk Density 1500-1600 Kg/M3. (Note : The Rate Quoted By Contractor Shall Include Cleaning Of Surface, Application As Per Instruction And Scaffolding Upto 20 Mtr Ht All As Specified And Directed.Make Fosroc/ Sika/ Ultrarech/ Choksey , M&L For Preparation Of New Plastered Surfaces & Applying A Layer Of Birla Putty On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Distemper Complete All As Specified And Directed. , M/L For Complete Removal Of Existing Treatment For Preparing Old Painted Surfacess And Applying Two Coat Of Distemper Oil Emulsion Over A Coat Of Primer Complete All As Specified And Directed. , M&L Three Coats Of White Wash On Ceiling Including All Preparation Complete All As Sopecified , Material & Labour For Applying Two Or More Coats Of 100% Remium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance,Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives@ 1.43 Litre/ 10 Sqm Over And Including Primingcoat Of Exterior Primer Applied @ 0.90 Litre/ 10Sqm Over New Surfaces Complete All As Specified And Directed. , M&L Preparation Of Old Surfaces Including Cornices Etc And One Coat Of Oil Bound Distemper Complete All As Specified And Directed. , S&F 20Mm Thick 2Nd Class Soft Wood (Chir) Boarding Planned One Side Fixed With Butt Joints With Nails In Any Situation/Position Except Flooring And Skirting Complete All As Specified And Directed. , M&L For 2Nd Class Hard Wood Clean Sawn In As In Scantling Framed And Over 40Sqcm Fixed With Screws Etc All As Specified And Directed.. , S&F In Repair 110Mm Dia Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Joints Fixed To Walls Or Laid In Trenches Etc Complete. , S&F In Repair 75Mm Dia Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Joints Fixed To Walls Or Laid In Trenches Etc Complete. , M&L 300X450x7mm Thick Glazed Ceramic Digital Tiles Coloured Incl , Design And Pattern As Approved Fixed As In Vertical Surface Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Cement With Colour Pigment To Match Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed. , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.11 Sqm But N.Exc. 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigment Incl 15Mm Thick Screed Bed In Cm 1:6 Complete All As Spd , M&L For 15Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , M&L For 20 Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Bib Tap Long Body Cp, Screwed For Iron Pipes Complete All As Specified And Directed , S&F Angle Cock 15 Mm Bore Brass Chromium Plated, Screwed Both Ends For Pipes Or For Unions Fixed In Repairs Including Making Good To Match With Existing Surface , S&F Pillar Taps 15 Mm Bore, Brass Chromium Plated , Screwed Down High Pressure With Or Without Letter Hot Or Cold With Long Screwed Shanks And Fly Nut Complete All As Specified, Fixed In Repairs. , S&F Bib Tap Standard Of Ptmt (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath Fitting), Any Colour, Screwed Foriron Pipe 15 Mm Bore Pipe (Minimum Weight 90 Gm) All As Specified, Fixed In Repairs (Make : Prayag Or Equivelent As Approved) , S&F In Repair Polymer White (Polypropeylene Delrin And Abs) Low Level Flushing Cistern 10 Ltrs Capacity, Valveless, Syphonic Action Type Complete With Inlet, Ball Valve Float Valve, Bends Brackets, Rawl Plug, Brass Screws Handle Etc Complete, Complete All As Specified And Directed. , S&F In Repairs, 550X400mm Vitreous China, Wash Hand Basin , Flat Back With Pedestal Excluding Trap And Waste Chain And Plug And Porcelain Stopper Including Sutaible Size Brackets Waste Pipe And Waste Coupling Complete All As Specified And Directed. , S&F Vitreous China Squatting Pan Orrissa Pattern Size 580 X 440 Mm White With Intregal Foot Rests, With & Including P Or S Trap (Excluding Material & Labour Of Flushing Cistern And Flush Pipe) Including Conection To Trap And To Flush Pipe Etc Complete Including Making Good To Floor Complete All As Specified And Directed Fixed In Repairs. , S& F In Repair Vitreous China Premium/ 1St Quality Wash Down Water Closet Ewc White/ Ivory/Off White (Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. (Excluding Flushing Cistern & Flush Pipe) Complete In All Respect All As Specified. , M&L Pvc (Swr) Floor Trap 75Mm Dia Plain With Grating Including Jointing With Solvent Cement Etc Complete, Fixed In Repair. , S&F Pvc Circular Top Cover Suitable To Rotational Moulded Polyethylene Water Storage Tanks Of 300 /500 Litres Capacity Tanks Of Standard Mares, With 6 Mm Dia Nut And Bolts On Two Ends Of Cover To Act As Hinge As Will As Locking Arrangement For Side Opening , M&L For Sunken Floor Treatment As Described As Under (I) To (Vii) :- (I) Demolition Of Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Or In Any Type Of Filling In Sunken Portion & Cleaned The Sunken Portion Incl Vertical Wall Surface Complete As Directed. (Ii) M&L To Fill The Sunken Floor With Plain Cement Concrete ( 1:5:10) Type E-2 Using Bk Aggregate Over The Treated Surface Complete All As Specified And Directed. (Iii) M& L 40Mm Thick (Min) Plain Cement Concrete (1:2:4) Type B-0 Using 12.5 Mm Graded Stone Aggregate With Integral Water Proofing Compound As Per Manufacturer Instructions On Bottom Of Sunken Portion With Proper Slope Towards Spout. Vertical Sides Shall Be Plastered In Cm (1:3) 15 Mm Thick Mixed With Water Proofing Compound As Per Manufacturer Instructions. Plaster Shall Be Extended Over Plain Cement Concrete Coving When The Same Is Green I.E. Plain Cement Concrete & Plaster Be Carried Out At The Same Time Complete All As Specified And Directed.(Iv) After Laying Sewage/ Plumbing Pipes With Fixtures In Position 2 Coats Of Omiplas Ep-101 Epoxy Compound Shall Be Applied Complete All As Specified And Directed.(V) Spouts Of 25Mm Dia Gi Pipe Light Grade Projecting 450Mm Clear Of Face Outer A Wall With Mosquito Proof Cap On Inner Face Of Pipe Shall Be Provided To Drain Out Seepage Water ,Including Cutting Holes And Making Good If Needed As Specified And Directed. (Vi) Test Again Of Water Tightness By Pounding For 72 Hours & Rectify Defects If Any Till Total Elimination Of Defects Complete All As Specified And Directed.The Sunken Portion Shall Be Tested For Leakage / Seepage / Dampness By Pounding With Water For 72 Hours. In Case Any Defect Is Noticed The Portion Shall Be Grouted With Cement Slurry Mixed With Suitable Chemical & Tested Again. The Process Of Grouting And Testing Shall Be Repeated Till Leakage / Seepage / Dampness Is Eliminated. , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Window & Other Frames/ Chowkhat Of Size 45 X 70 Mm Comprising Of Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wwod Powder/ Rick Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Stat Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modules Of Elasticity 900 N / Mm 2 And Resistance To Spread Of Flame Of Class A Catogory With Property Of Being Termite/ Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed In Position With Ms Hold Fast/Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge (M.S. Hold Fast/ Lugs Or Ss Dash Fasteners Shall Be Paid For Separately). , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of 35 Mm Thick Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/ Cum And Screw Withdrwal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N Mm2 Modulus Of Elasticity 850 N / Mm2 And Resistance To Spread Of Flame Of Class A Catogary With Property Of Being Termite/ Borer Proof, Water/ Moisture Proof And Fire Retardanat And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws, All As Per Direction Of Engineer-In-Charge (Note:- Stainless Steel Butt Hinges And Necessary Ss Screws Shall Be Paid Separately. , S&F Mild Steel Work As Hold Fasts, Bands, Straps, Supports Or Stays For Pipes Eaves Gutter Including Bolts If Required, Hooks (Stay), Clamps And Similar Small Articles, Conforming Tofe 310-0 Or Fe 410-0 Complete All As Specified And Directed. , S&F 100Mm Size Ms Butt Hinges, Medium Weight, Cold Rolled And Fixed Complete All As Specified And Directed. , S&F 150Mm Long Aluminium Tower Bolt And Fixed Complete All As Specified And Directed. , S&F 125 Mm Size Aluminium Handle Plate Type Anodised Complete All As Specified And Directed. , M & L For Roof Surface Must Be Pressure-Washed With Water With, Is To Be Used To And/ Or Remove All Dirt, Dust, Chalking And Waste Products. Remove Algae, Mold By Using Bleach Solution. 2 Tiles Joint Repair All Visible And Joint More Than 0.50Mm And Not Giving Hollow Sound, On The Tiles Roof Or At The Junctions Of Flat Roof & Vertical Parapet Wall, Pipe Joints, Should Be Cut And Widen V Shape With Mechanical Cutter In The Size (6Mm W X 6Mm D) And Fill With Pmm Methodology.Glass Fiber Apply Urp Or Primeseal A On The Well Prepared Groove, Allow To Cure Tack Free. Followed By Filling All The Joints Covering The Entire Area Uniformly With Suitable Chemical. Allow Chemical To Cure A Minimum 24 Hours. Apply Minimum 50Mm-100Mm Width 45 Gms Glass Fibre Mesh/ Non-Woven Geo Testile Fleece With The Coat Of Roofseal Classic Along The Length Of Crack When The 1St Coat Is Still In Wet Condition. Apply The Second Coat With An Interval If 4-6 Hours. Waterproofing: Apply A Coat Of Roofseal Classic (Diluted With Water In The Ratio 2:1) As Self Priming 14.0-18.0 Sq. Mt/Litre.Allow Coating To Dry For 3-4 Hours. Applt Two Coats Of Dr Fixit Roofseal Classic/Litre/Coat, Without, The Rate Of Application Being The Same For Both The Coats. This Would Ensure Correct Consumption Of Material That Will Deliver A Total Of Dft Of Microns. Allow The System To Air Cure For 5 Days Minimum. Check To See No Void Surface Is Left Untreated/Uncoated. The Material Having Following Technical Specification As Per Astm D 6083 M- Type Ii, Attains A Tensile Strength Of 2.5 N/Mm2 Confirming To Astm D 2370: Elongation At Break 300% Confirming Astm D 2370, Adhesion To Concrete 2.0N/Mm2 Confirming Astm D 4541 And Crack Bridging Ability Up To 2Mm, Air Cure The Coating For 7 Days Before Water Pound Test For 48 Hrs. The System Comes With 7 Year Waterproofing Warranty From Service Provider. For Vertical Surface : Apply 2 Coat Of Dr Fixit Roofseal Classic With Forced Coverage Of /Litre/Coat. Entire Terrace Should Be Coated With Roofseal Classic Alongwith Parapet Walls Needs To Be Enveloped With Roofseal Classic/Raincoat System. The Total 3 Coats Treatment Inclu Taking Down/Dismantling Of Old Tarfelt/Old Unserviceable Roof Treatment From Reinforced Cement Concrete Roof By Scrapping, Broomig And Washing With Water Etc Including 10Mm Thick Rendering In Cm 1:3 With Water Proofing Compound Complete All As . Make : Dr Fixit, Asian Or Equivalent (Note : The Treatment Should Be Carried Out Through Authorised Applicator Only) , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 500 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Complete All As Specified And Directed. , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 1000 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Complete All As Specified And Directed. , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
17.
Health and Family Welfare #11180771 Price Bid
Tender For Supply Of Drugs And Medicines- 1 Drugs And Consumables 2 Oxygen (Medicinal Gas) Inhalation 3 Oxygen(Medicinal Gas) Inhalation Should Be Certified For Medical Use Contains Not Less Than 99% V/V Of Oxygen, Contains Not More Than 5Ppm V/V Of Carbanmonooxide, Contains Not More Then 30Ppm V/V Of Carban Dioxide Should Be Free Of Halogens, Oxidising Substances & Water. 4 Halothane Inhalation 250 Ml Bottle 5 Ketamine (As Hydrochloride) Injection 50 Mg /Ml,10 Ml Vial 6 Nitrous Oxide Inhalation 7 Thiopentone Injection Powder 0.5 G 8 Propofol Injection 1% Vial (10 Mg/Ml , 10 Ml Vial) 9 Isoflurane Inhalation 100 Ml Vial 10 Sevoflurane Inhalation 250 Ml 11 Bupivacaine Injection 0.5%, 5Ml Amp. 12 Bupivaccine Heavy 5 Mg With Dextrose Monohydrate 80 Mg/Ml Injection 4 Ml Ampoule 13 Lignocaine Injection 2%, 30 Ml Vial 14 Lignocaine Jelly 2% W/V ( With Seprate Nosal), 30Gm Tube 15 Lignocaine Hydrochloride And Adrenaline Bitartarate Injection 20Mg/Ml And 0.01Mg/Ml Adrenaline, 30 Ml Vial 16 Atropine Injection 0.6 Mg/Ml, 1 Ml Ampoule 17 Glycopyrolate Injection 0.2 Mg/Ml, 1 Ml Ampoule 18 Diazepam Injection 5 Mg/Ml, 2 Ml Ampoule 19 Diazepam Tablet 5 Mg 20 Midazolam Injection 1 Mg/Ml, 5 Ml Vial 21 Midazolam Nasal Spray 1.25 Mg/Spray 22 Diclofenac Supositories 50 Mg 23 Diclofenac Sodium Gastro-Resistant Tablet 50 Mg 24 Diclofenac (Sodium) Injection 25 Mg/Ml ,3Ml Amp. 25 Diclofenac Gel 1%, 30 Gm Tube 26 Diclofenac + Paracetamol Tablet 50Mg+325Mg 27 Ibuprofen Tablet 200Mg 28 Ibuprofen Tablet 400 Mg 29 Ibuprofen Suspension 100 Mg/5 Ml. 60 Ml Bottle 30 Paracetamol Tablet 500 Mg 31 Paracetamol Injection 150 Mg/Ml, 2 Ml Amp. 32 Paracetamol Peaditric 125Mg/5Ml 60 Ml Bottle 33 Paracetamol Paediatric Oral Suspension 150Mg/Ml, 10 Ml Vial With Marked Dropper 34 Paracetamol Infusion 100 Mg/10 Ml, 100 Ml Bottle Ffs Technology - 35 Aceclofenac Tablet 100 Mg 36 Etoricoxilb Tablet 90 Mg 37 Morphine Injection 10 Mg/Ml, 1 Ml Ampoule 38 Morphine Tablet 20 Mg 39 Tramadol Capsule 50 Mg 40 Tramadol Injection 50 Mg/Ml, 2 Ml Ampoule 41 Tramadol Hydrochloride Capsule 100 Mg 42 Pentazocine Injection 30 Mg/ Ml, 1 Ml Ampoule 43 Fentanyl Injection 50 Mcg/Ml, 2Ml Ampoule 44 Pethidine Injection 50 Mg/Ml, 1Ml Ampoule 45 Thiocolchicoside Capsule 4 Mg 46 Midazolam Nasal Spray 1.25 Mg/Spray 47 Beclofen Tablet 10 Mg Tablet 48 Allopurinol Tablet 100 Mg 49 Sulfasalazine Tablet 500 Mg 50 Methotrexate Tablet 2.5 Mg 51 Methotrexate Tablet 5 Mg 52 Naxproxen (500Mg)+ Domperidone (10Mg) Tablet 53 Diacerein 50 Mg + Glucosamine Sulphate 750 Mg Tablet - 54 Cetrizine Syrup 5 Mg/5Ml, 60 Ml 55 Chlorpheniramine Tablet 4 Mg 56 Pheniramine Maleate Injection 22.75 Mg/Ml, 2 Ml 57 Hydroxyzine Tablet 10 Mg 58 Dexamethasone Tablet 0.5 Mg 59 Dexamethasone Injection 4Mg/Ml, 2 Ml Ampoule 60 Hydrocortisone ( Sodium Sucinate Powder) Injection 100 Mg Vial, With 2 Ml Distilled Water For Reconstitution 61 Prednisolone Tablet 10 Mg 62 Prednisolone Tablet 20 Mg 63 Methyl Prednisolone Injection 1Gm, 1 Gm Vial With Diluent 64 Adrenaline Injection 1 Mg/Ml, 1:1000, 1 Ml Amp 65 Levocetrizine Tablet 5 Mg 66 Nor Adernaline Injection 4Mg/Ml 67 Cyproheptadine Tablet 4 Mg 68 Monteleukast Tablet 5 Mg 69 Methyl Prednisolone Tablet 8 Mg 70 Antisnake Venom ( Dry Powder For Polyvalent Solution) Injection Vial With 10 Ml Diluent 71 Calcium Gluconate Injection 100 Mg/Ml, 10 Ml Amp 72 Naloxone Injection 400 Mcg/Ml, 1Ml Ampoule 73 Pralidoxime (Pam) Injection 1 Gm Vial 74 Activated Charcoal Tablet 500 Mg 75 Carbamazepine Tablet 200 Mg 76 Carbamazepine Tablet 400 Mg 77 Carbamazepine Oral Solution 100Mg/5Ml, 30 Ml Bottle 78 Lorazepam Tablet 1 Mg 79 Lorazepam Tablet 2 Mg 80 Lorazepam Injection 4Mg, 2Ml 81 Magnesium Sulphate Injection 1 Gm /2Ml (50%W/V), 2 Ml Ampoule 82 Magnesium Sulphate Injection 2.5 Gm /5Ml(50%W/V), 5 Ml Ampoule 83 Phenobarbitone Tablet 30 Mg 84 Phenobarbitone Tablet 60 Mg 85 Phenobarbitone Injection 200 Mg/ Ml 86 Phenobarbitone Oral Solution 20 Mg/ 5 Ml,60 Ml Bottle 87 Phenytoin Tablet 100 Mg 88 Phenytoin Tablet 300 Mg 89 Phenytoin Oral Solution 25 Mg/Ml, 100 Ml Glass Bottle 90 Phenytoin (Sodium) Injection 100Mg, 2Ml Amp. 91 Sodium Valproate/Valproic Acid Enteric Coated Tablet 200 Mg 92 Sodium Valproate/Valproic Acid Enteric Coated Tablet 500 Mg 93 Sodium Valproate/Valproic Acid (Sodium)Controlled Released Tablet 300 Mg 94 Sodium Valproate Injection 100 Mg/Ml 95 Sodium Valproate Suspension 200 Mg/5 Ml, 100 Ml 96 Clobazam Capsule 10 Mg 97 Divalproex Sodium Tablet 500 Mg 98 Levetiracetam Tablet 500 Mg 99 Toperamate Tablet 50 Mg 100 Injection Levetricatum 100 Mg, 3 Ml - 101 Levitiracetam Oral Solution 102 Levitiracetam Oral Solution, 100Mg/Ml, 100Ml Bottle 103 Albendazole Chewable Tablet 400 Mg 104 Albendazole Oral Suspension 200 Mg/5 Ml,10 Ml Bottle 105 Levamasole Tablet 50 Mg 106 Levamasole Tablet 150 Mg 107 Amoxicillin Capsule 250 Mg 108 Amoxicillin Capsule 500 Mg 109 Amoxicillin Oral Suspension 125 Mg/5 Ml, 60 Ml Bottle 110 Amoxicillin + Pottasium Clavulanate Tablet 500 Mg + 125 Mg 111 Amoxicillin + Pottasium Clavulanate Dispersible Tablet 200 Mg +28.5 Mg 112 Amoxicillin + Clavulanic Acid Injection 1.2 Gm , 10 Ml Vial With Diluents 113 Amoxicillin + Clavulanic Acid Injection 250 Mg +50 Mg, Vial With Diluents 114 Ampicillin Sodium Injection 500Mg 2 Ml Vial With Diluent 115 Cefixime Tablet 200 Mg 116 Cefixime Oral Suspension 50 Mg/ 5 Ml, 30 Ml Bottle 117 Cefadroxil Oral Suspension 125 Mg/ 5Ml, 30 Ml Bottle 118 Cefotaxime Injection 250 Mg 119 Cefotaxime Injection 500 Mg 5 Ml Vial With Diluent 120 Cefotaxime Sodium Injection 1 Gm 10 Ml Vial With Diluent 121 Ceftriaxone Injection 250 Mg 2 Ml Vial With Diluent 122 Ceftriaxone Injection 1 G, 10 Ml Vial With Diluents 123 Benzathine Penicillin Injection Powder 12 Lacs Iu , Vial With Diluent 124 Cefoperazone + Sulbactam (1G+1G) Injection 125 Immipenum Injection 500 Mg 126 Imipenem And Cilastatin Injection (500 Mg+500 Mg) 127 Cefazolin Injection 1 Gm 128 Amikacin Injection 250Mg/ Ml, 2 Ml Vial 129 Amikacin Injection 50 Mg/ Ml, 2 Ml Vial 130 Gentamycin Injection 40 Mg/ Ml, 2 Ml Ampoule 131 Azithromycin Tablet 250 Mg 132 Azithromycin Tablet 500 Mg 133 Azithromycin Oral Suspension 40 Mg/Ml , 15 Ml Bottle 134 Levofloxacin Tablet 500 Mg 135 Ofloxacin Tablet 200 Mg 136 Ciprofloxacin Tablet 250 Mg 137 Ciprofloxacin Tablet 500 Mg 138 Ciprofloxacin Injection 2Mg/Ml, 100 Ml Bottle For Infusion Ffs Technology 139 Doxycycline Capsules 100 Mg 140 Cotrimoxazole (Sulfamethoxazole + Trimethoprim) Tablet 800 Mg + 160 Mg 141 Co-Trimoxazole [Sulphamethoxazole (A) + Trimethoprim (B)] Oral Liquid 200 Mg (A) + 40 Mg (B)/5 Ml 142 Metronidazole Tablet 200 Mg 143 Metronidazole Tablet 400 Mg 144 Metronidazole I.V Infusion 5 Mg/Ml, 100 Ml Bottle For Infusion (Ffs Technology) 145 Metronidazole Suspension 200Mg/5Ml , 60 Ml Bottle 146 Cloxacillin Capsule 500 Mg 147 Nitrofurantoin Capsule 100 Mg 148 Vancomycin Injection 500 Mg 149 Linezolid Tablet 600 Mg 150 Norfloxacin Tablet 400 Mg 151 Fluconazole Tablet 150Mg 10*10 152 Fluconazole Tablet 200 Mg 10*10 153 Griseofulvin Tablet 250 Mg 154 Itraconazole Capsules 200 Mg 155 Amphotericin B Powder For Injection 50 Mg And Vial Has Sodium Deoxychlolate Or Liposomal Complex 156 Terbinafine Tablet 250 Mg 157 Acyclovir Tablet 200 Mg 158 Acyclovir Tablet 400 Mg 159 Acyclovir Tablet 800 Mg 160 Tinidazole Tablet 500 Mg 161 Ivermectin Tablet 6 Mg 162 Diethyl Carbamazine Tablet 100Mg 163 Flunarazine Tablet 10 Mg 164 Propranolol Tablet (Sr) 40 Mg 165 Propranol Tablet 20 Mg 166 Levodopa + Carbidopa Tablet 100 Mg + 10 Mg 167 Trihexyphenidyl Tablet 2 Mg 168 Bromocriptine Tablet 2.5 Mg 169 Ferrous Sulpahte + Folic Acid Syrup 100 Mg + 0.5 Mg/ 5 Ml In A Flavoured Base/Vehicle 50 Ml Bottle, Ropp Cap Bottle With Inert Liner & Bottle To Be Provided With A Dispenser To Dispense To 1 Ml, 1.5Ml And 2 Ml Each Time And Packed In A Mono Carton Note:- For Detailed Specifications Kindly See Below Attached Copy. 170 Elemental Iron 60 Mg +Folic Acid 500 Mcg, Sugar Coated And Red Color Tablet 171 Ferrous (Iron Sucrose) Injection 20 Mg/Ml 172 Folic Acid Tablet 5Mg 173 Hydroxycobalamin Injection 1 Mg/ Ml 174 Warfarin (Sodium) Tablet 2 Mg 175 Heparin Injection 1% 176 Enoxaprin Sodium Injection 60 Mg In Pfs 177 Phytomenadion Injection 1 Mg/0.5 Ml Water Based Single Dose Ampoule 178 Plasma Volume Expander Injection ( Each 100 Ml Contains Polygeline, Polypeptides Of Degaraded Gelatin, Cross Linked Via Urea Bridges 3.5 G ( Equivalent To 0.63 G Of Nitrogen) Nacl Ip 0.85 G, Kcl Ip 0.038 G Cacl2 Ip 0.070G Water For Injection Ip Q.S Electrolytes In M.Mol/Litre, 500 Ml Ffs 179 Glyceryl Trinitrate (Sublingual) Tablet 500 Micrograms 180 Glyceryl Trinitrate ( Niroglycerine) Injection 5 Mg/Ml, 5 Ml Ampule 181 Isosorbide Mononitrate Tablet 30 Mg (Sr) 182 Isosorbide Dinitrate Tablet (Sublingual) 5 Mg 183 Metoprolol Tablet 25 Mg 184 Metoprolol Tablet (Sr) 50 Mg 185 Carvediolol Tablet 3.125 Mg 186 Adenosine Injection 3 Mg/ Ml, 1 Ml Ampoule 187 Diltiazem Injection 5 Mg/Ml 188 Diltizem Hydrochloride Tablet 30 Mg (Modified Release), 10*10 189 Amiodarone Tablet 100 Mg 190 Verapamil Tablet 40 Mg 191 Amiodarone Injection 150 Mg/ 3 Ml 192 Atenolol Tablet 50 Mg 193 Amlodipine Tablet 5 Mg 194 Amlodipine Tablet 10 Mg 195 Methyldopa Tablet 250 Mg 196 Methyldopa Tablet 500 Mg 197 Nifedipine Capsule(Sublingual) 5 Mg 198 Nifedipine Tablet Ip Sr/Er 10 Mg 199 Ramipril Tablet 5 Mg 200 Labetalol Tablet 100 Mg 201 Labetolol Injection 5Mg/Ml, 4Ml Amp. 202 Telmisartan Tablet 40 Mg 203 Telmisartan Tablet 80 Mg 204 Losartan + Hydrochlorothiazide Tablet (50 Mg + 12.5 Mg) 205 Olmesartan 20 Mg + Amlodipine 5 Mg + Hydrochlorothiazide 12.5 Tablet 206 Clinidipine Tablet 20 Mg 207 Hydrochlorthiazide Tablet 12.5 Mg 208 Chlorthalidone Tablet 6.25 Mg 209 Nebivalol Tablet 5 Mg 210 Enalapril Tablet 5 Mg 211 Dobutamine Injection 250Mg/5Ml 212 Dopamine Injection 40 Mg/ Ml In 5Ml Ampoule 213 Digoxin Tablet 0.25 Mg 214 Acetylsalicylic Acid Tablet 150 Mg 215 Acetylsalicylic Acid Tablet 75 Mg Gastro-Resistant (Enteric Coated/ Delayed Release) 216 Clopidogrel Tablet 75 Mg 217 Streptokinase Injection Powder 1500000 Iu 218 Atorvastatin Tablet 10 Mg 219 Atorvastatin Tablet 20 Mg 220 Rosuvastatin 10 Mg+ Fenofibrates 160 Mg Tablet 221 Tranexamic Acid Tablet 500 Mg 222 Tranexamic Acid Injection In Water For Injection 100 Mg/Ml, 5 Ml Ampoule 223 Mephentermine Injection 30 Mg/Ml, 1 Ml Amp. 224 Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet 225 Citicoline Tablet 500 Mg 226 Clotrimazole Pessaries 200 Mg 227 Clotrimazole Cream 2% W/W, 15 Gm 228 Clotrimazole Mouth Paint 1% W/V In Propylene Glycone Glycerian Base 15 Ml 229 Sertaconazole Cream 2% W/W, 15 Gm 230 Ketaconazole Lotion 2% W/V, 50 Ml 231 Acyclovir Eye Ointment 3% , 4.5 Gm Tube 232 Clindamycin Gel 1% W/W, 10Gm Tube 233 Clobetasol 0.05% + Gentamycin 0.1% Ointment 15 Gm Tube 234 Silver Sulfadiazine Cream 1%, 30 Gm Tube 235 Framycetin Cream 1%, 30 Gm Tube 236 Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 50 Ml Dark Bottle 237 Benzoyl Per Oxide Gel 2.5%, 20 Gm Tube 238 Permethrin Lotion 5%, 50 Ml 239 Permethrin Cream 5%, 30 Gm 240 Betamethasone Dipropionate Cream 0.1% W/W , 5 Gm 241 Fluticasone Cream 0.01 % 10Gm 242 Calamine Lotion Ip-Calamine Ip-15% W/V, Zinc Oxide Ip-5%W/V,Glycerin Ip-5% W/V ,65Ml Bottle 243 Benzyl Benzoate 25% Lotion 100 Ml 244 Podophylline Resin Topical Solution 25% , 10 Ml Bottle 245 Fusidic Acid Cream 2%, 10Gm Tube 246 Coal Tar Solution 5% W/V, 100 Ml Bottle 247 Salicylic Acid Ointment 6%, 15 Gm Tube 248 White Petrolatum Jelly 100 %, 50 Gm Jar 249 Clotriamazole 1%+ Beclomethasone Dipropionate 0.025% Lotion 15 Ml 250 Mometasone Furoate Cream 0.1 % W/W 251 Mometasone Furoate Cream 0.1 % W/W, 10Gm Tube 252 Hydroquinone 2.0% W/W + Tretinoin 0.025% W/W + Mometasone Furoate 0.1% W/W In A Cream Base Q.S 253 Kojic Acid Cream 2 % 254 Hydroquinone 2%/4% + Tretinoin 0.025 % +Fluocinolone Skin Cream 255 Hydroquinone 4%+ Tretinoin 0.05% +Fluocinolone 0.01 % Skin Cream, 15Gm 256 Tacrolimus Ointment 0.03% W/W, 10 Gm 257 Tacrolimus Ointment 0.1% 10Gm Tube 258 Choline Salicylate Solution Bp Equivalent To Choline Salicylate 8.7 % W/W, Benzalkonium Chloride Solution Ip 0.01 % W/W, Lignocaine Hydrochloride Ip 2.0 % W/W Gel Base Q.S., 10 Ml Packing 259 Sunscreen Lotion Spf 26 ,100Ml Bottle 260 Clobetasone Butyrate(0.05 W/W + Miconazole(2.0 W/W) ,15 Gm Cream - 261 Halobetasol Propionate(0.5% W/W + Salicylic Acid (3% W/W) , 10Gm Ointment 262 Minoxidil Solution 5%, 60Ml Bottle 263 Gamma Benzene Hexachloride 1% Lotion,100 Ml 264 Sertaconazole Nitrate 2 % W/W+ Beclomethasone Dipropionate 0.025% W/W, 15Gm Tube 265 Cotrimazole 1%+ Beclomethasone Dipropionate 0.0025% Lotion 15 Ml Lotion 1%, 0.0025%, 15Ml 266 Mupirocin Cream 2% W/W,5Gm Tube 267 Isotretinoin Capsule 20 Mg 268 Methoxsalen Tablet 10 Mg 269 Triamcinolone Injection 20 Mg/ Ml 270 Triamcinolone Injection 40 Mg/Ml 271 Povidone Iodine Solution 5% ,500 Ml 272 Povidone Iodine Ointment 5%,15 Gm 273 Povidone Iodine Scrub (Povidone Iodine Cleansing Solution 7.5 %, W/V With Foaming Agent) 500 Ml 274 Povidine Iodine Scrub 7.5% W/V, 500Ml 275 Hydrogen Peroxide Solution 6%, 400 Ml Bottle 276 Cetrimide Solution 20% Conc. For Dilution, 500 Ml Plastic Bottle 277 Chlorhexidine Solution 5% Conc. For Dilution, 500 Ml 278 Bleaching Powder Containg Not Less Then 30% W/W Of Avialble Chlorine, 1Kg/25 Kg 279 Feracrylum 1% W/W Sterile Solution 100Ml Bottle 280 Feracrylum 3% W/W Gel , 15Gm Tube 281 Tritium Vulgare Extract And Phenoxyethanol Cream,32Gm Tube 282 Glutraldehyde Solution 2% - 2.5%, 1 Litre Pack 283 Potassium Permanganate Crystal For Solution 100 Gm 284 Bleaching Powder Containg Not Less Then 30% W/W Of Available Chlorine Powder - 285 Furosemide Tablet 40 Mg 286 Furosemide Injection 10 Mg/Ml, 2Ml Ampoule 287 Mannitol Intravenous Infusion 20% W/V, 100Ml Ffs Technology 288 Spironolactone Tablet 25 Mg 289 Torasemide Tablet 10 Mg 290 Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg Tablet 291 Disodium Hydrogen Citrate Oral Solution/Syrup 1.38 -1.45 Gm/ 5 Ml, 100 Ml Bottle 292 Sodium Bicarbonate Infusion 7.5% W/V, 10 Ml Ampoule 293 Alkalizer Mb6 500Ml (Potassium Citrate Magnisum Citrate Syrup & Vit B6) 294 Bethanecholchloride Tablet 25 Mg 295 Darifenacin Tablet 7.5 Mg 296 Silodosin Tablet/Capsule 8.0 Mg 297 Mirabegron Tablet 50 Mg 298 Pyridium Tablet 200 Mg 299 Aluminium Hydroxide 240 Mg + Magnesium Hydroxide 100Mg+ Simethicone 25 Mg + Magnesium Carbonate 60 Mg Chewable Tablet 300 Dried Aluminium Hydroxide Gel + Magnesium Hydroxide + Simethicone Oral Suspension 250 Mg+ 250 Mg+ 50 Mg/ 5 Ml, 170 Ml Bottle 301 Ranitidine Injection 25 Mg/Ml, 2 Ml Amp 302 Ranitidine Syrup 150 Mg/10 Ml 303 Ranitidine Tablet 150 Mg, Film Coated 304 Omeprazole Capsule 20 Mg 305 Pantoprazole Injection 40 Mg, Vial With 10 Ml Diluent 306 Pantoprazole + Domperidone Sr (40Mg+30Mg) Capsule 307 Sucralfate 1Gm With Oxetacain 10Mg/10Ml Suspension 308 Simethicone Syrup 40Mg,60 Ml Bottle 309 Domperidone Tablet 10 Mg 310 Domperidone Suspension 1 Mg/Ml, 30 Ml Bottle 311 Cinnarizine Tablet 25 Mg 312 Metoclopramide Tablet 10 Mg 313 Metoclopramide Injection 5 Mg/Ml, 2 Ml Ampoule 314 Ondansetron Tablet 8 Mg 315 Ondansetron Injection 2Mg/Ml ,2Ml Ampoule 316 Ondansetron Oral Liquid 2 Mg/ 5 Ml 317 Ondansetron Oral Liquid 2Mg/5 Ml , 30 Ml Bottle 318 Promethazine Injection 25 Mg/Ml, 2 Ml Amp 319 Promethazine (Hydrochloride) Elixir Or Syrup 5 Mg/5 Ml, 60 Ml Bottle 320 Doxylamine Tablet 10 Mg 321 Prochlorperazine Mouth Dissolving Tablet Flavored Base 5Mg 322 Anti-Haemorrhoidal Containing: Beclomethasone Dipropionate 0.025% W/W, Phenylephrine Hyderochloride 0.10% W/W, Lignocaine Hydrochloride 2.5% W/W In Soft Paraffin Base 20 Gm Tube 323 Dicyclomine Tablet 10 Mg 324 Dicyclomine Oral Solution 10Mg/5Ml 325 Mephenamic Acid + Dicyclomine Tablet 500 Mg +20 Mg 326 Drotaverine Tablet 80 Mg 327 Drotaverine Injection 40 Mg/ 2 Ml 328 Hyoscine Butyl Bromide Tablet 10 Mg 329 Hyoscine Butyl Bromide Injection 20 Mg/ Ml, 1 Ml Amp. 330 Bisacodyl Gastro-Resistant (Enteric Coated/Delayed Release) Tablet 5 Mg 331 Lactulose Solution 10 Gm/ 15 Ml, 60 Ml Bottle 332 Ispaghula Granules/ Husk/ Powder 100 Gm 333 Enema 334 Dioctyl Sulfosuccinate Sodium Liquid,100 Ml 335 Magnesium Hydroxide Liquid 100 Ml 336 Oral Rehydration Salts Powder For 1000 Ml Solution 337 Oral Rehydration Salts Powder For 200 Ml Solution 338 Zinc (Sulphate) Dispersible Tablet 20 Mg 339 Octreotide Injection 100 Mcg/Ml, Single Dose 1 Ml Vial 340 Levosulpride (Sr) 75 Mg + Rabeprazole (Ec) 20 Mg Capsule 341 Saccharomyces Boulardii 5 Cfu Sachets 342 Probiotic Capsule/Syurp (Vizylac/Sporolac) 343 Probiotic Syrup (Streptococus Faecalis 30 Million, Clostridium Butirium 2 Million,Bacillius Mesentiricus 1 Million,Lactic Acid Bacillus 50 Million) Suspension In 5Ml 344 Probiotic Capsule (Lactobacillius Blends) 345 Chymotrypsin+ Trypsin (1:6 ) Tablet 100K Au 346 Cyproheptadine Hcl Ip-2Mg, Tricholine Citrate-275 Mg, Sorbitol Solution (70%)(Non Crystallising) Ip-2 Gm, 200 Ml Bottle 347 Erythropoietin Injection 4000 Units/Ml, Single Dose 1 Ml Vial 348 Insulin (Soluble) Injection 40 Iu/Ml In 10 Ml Vial 349 Intermediate-Acting Insulin (Nph) Injection 40 Iu/Ml In 10 Ml Vial 350 Biphasic Isophane Injection 40 I.U/Ml, (30/70), 10 Ml Vial 351 Lantus Insulin (Insulin Glargine 100 Units/Ml) 352 Metformin Tablet 500 Mg 353 Metformin Tablet 1 Gm 354 Metformin Tablet Sr 500Mg 355 Metformin Tablet Sr 1 Gm 356 Glimipride Tablet 1 Mg 357 Glimipride Tablet 2 Mg 358 Teneligliptin Film Coated Tablet 20 Mg 359 Voglibose 0.3 Mg + Metformin 500Mg+ Glimipride 1 Mg Tablet 360 Vildagliptin Tablet 50 Mg 361 Empagliflozin Tablet 10 Mg 362 Glibenclamide Tablet 5 Mg 363 Clomifene Citrate Tablet 50 Mg 364 Medroxyprogesterone Tablet 10 Mg 365 Norethisterone Tablet 5 Mg 366 Micronized Progesterone Tablet 200 Mg 367 Mifepristone Tablet 200 Mg 368 Mifepristone Tablet 25 Mg 369 Cabergoline Tablet 0.5 Mg 370 Dienogest Tablet 2 Mg 371 α -Hydroxyprogesterone Injection 500 Mg 372 Hcg 5000 Iu(Human Chorionic Gonadotropin) Injection 373 Conjugated Estrogen Tablet 0.625 Mg 374 Ethamsylate Tablet 500 Mg Tablet - 375 Latrazole Tablet 2.5 Mg 376 Thyroxine Tablet 50 Mcg 377 Carbimazole Tablet 5 Mg 378 Ethinyestradiol Tablet 5 Mcg 379 Estrogens Cream 0.625 Mg 380 Ethinylestradiol Tablet (0.03 Mg+ Levonorgestrel (0.15) Tablet 0.03Mg, 0.15 381 Copper Bearing Intra-Uterine Device Iucd 380 A & Iucd 375 - 382 Male Condom - 383 Non Harmonal Ormeloxifene 30Mg Tablet 384 Emergency Contraceptive Pill Levonorgestrel Tablet 1.5 Mg 385 Pregency Testing Kit - 386 Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 150 Mcg/Vial 387 Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 300Mcg/Vial 388 Injection Recombinant Anti-D Immunoglobulin 300Mcg Vial/Pfs 389 Anti Rabies Immunoglobulin Injection (Human) 150 Iu/Ml, 2Ml Vial 390 Hepatitis B Immunoglobulin Injection 1Ml. 391 Hepatitis B Immunoglobulin Injection 100 Iu, 1 Ml Vial - 392 Tetanus Toxoid Injection 0.5 Ml Ampoule 393 Rabies Vaccine Single Dose Rabies Vaccine 2.5 Iu Injection For Human Use Prepared In Chick Embryo/ Vero Cell/ Human Diploid Culture Single Dose With Diluent And Disposable Syringe With Needle 394 Decaravimab+ Miromavimab Injection (600 Iu) 3 Ml 395 Atracurium Besylate Injection 10 Mg/ Ml, 2.5 Ml Amp. 396 Succinyl Choline Injection 50Mg/Ml, 10Ml Vial 397 Neostigmine Injection 500 Mcg/ Ml, 5 Ml Ampoule 398 Vecuronium Injection 10 Mg Vial 399 Ciprofloxacin Eye Drops 0.3%, 10 Ml Plastic Bottle 400 Ciprofloxacin Opthalmic Ointment 0.3 % 5 Gm Tube 401 Tobramycin Opthalmic Solution 0.3% W/V, 5Ml 402 Natamycin Eye Drops 2%, 5 Ml 403 Acylovir Eye Oint 5%,5 Gm 404 Povidone Iodine 5% Eye Drops 405 Prednisolone Sodium Phosphate Eye Drops 1%, 5 Ml 406 Flurbiprofen Eye Drops 0.03%, 10 Ml Vial 407 Flouromethalone Eye Drops 0.1 % W/V,5 Ml Vial 408 Olopatadine 0.1% Eye Drops 5 Ml 409 Acetazolamide Tablet 250 Mg 410 Timolol Eye Drops 0.5%, 5Ml 411 Atropine Drops 1% 412 Homatropine Eye Drops 1% 413 Tropicamide + Phenylepherine Eye Drops 0.8% + 5%, 5 Ml Vial 414 Cyclopentolate Eye Drops 1% W/V 415 Sodium Carboxymethyl Cellulose Eye Drops 0.5% W/V, 10 Ml 416 Hydroxypropyl Methylcellulose Injection 2% , 3 Ml Pfs (Glass Syringe) 417 Hyaluronidase Injection 1500 Iu/Ml 418 Tryptan Blue Dye 0.06% W/V, 1 Ml Vial 419 Moxifloxacin Eye Drops 0.5% W/V ,5Ml 420 Ranibizumab Injection 10Mg/Ml 421 Travoprost 40 Mg/Ml 2.5Ml Vial Eye Drop 422 Xylometazoline Nasal Drops 0.05 %, 10 Ml 423 Xylometazoline Nasal Drops 0.1 %, 10 Ml 424 Saline Nasal Drops 0.65%, 10 Ml 425 Wax Dissolving Ear Drops (Paradichlorbenzene 2% W/V, Benzocain 2.7 % W/V, Chlorbutol 5% W/V, Turpentine Oil 15% Ear Drops ), 10 Ml 426 Clotrimazole 1% W/V + Lignocaine Hydrochloride 2% W/V Ear Drops, 5Ml Bottle 427 Clotrimazole Ear Drops 5 Ml Vial 428 Ichthoimol Glycerine Solution 10 Ml Vial 429 Ciprofloxacin(0.3%)+Dexametasone(0.1%) Ear Drops ,5Ml 430 Antibacterial & Anti Fungal Ear Drop (Beclomethasone 0.025% W/V +Chloramphenicol 5% W/V +Clotrimazole 1% W/V ,Glycerine Base), 10 Ml Ear Drops 431 Fluticasone Furoate Nasal Spray 432 Fluticasone Furoate Nasal Spray 27.5Mcg, 10Ml 433 Boro-Spirit Ear Drops,3% W/V Ear Drops 10 Ml 434 Methyl Ergometrine Tablet 125 Mcg 435 Methyl Ergometrine Injection 200 Mcg In 1 Ml Ampoule 436 Oxytocin Injection 5 Iu In 1 Ml Ampoule 437 Carboprost Injection 250 Mcg In 1 Ml Amp./ Vial 438 Misoprostol Tablet 200 Mcg 439 Misoprostol Tablet 25 Mg 440 Dinoprostone Gel 0.5 Mg, 3 Gm 441 Isoxsuprine Tablet 10 Mg 442 Isoxsuprine Injection 5 Mg/ Ml,2Ml Ampoule 443 Valethamate Injection 8 Mg/Ml 444 Betamethasone Injection 4Mg/Ml 445 Chlorpromazine (Hydrochloride) Tablet 100 Mg 446 Fluphenazine Injection 25 Mg, 1 Ml Ampoule 447 Haloperidol Tablet 5 Mg 448 Haloperidol Injection 5Mg/1 Ml, 1 Ml Amp 449 Haloperidol Injection Long Acting 50 Mg 450 Risperidone Tablet 2 Mg 451 Risperidone Tablet 4 Mg 452 Risperidone Injection Long Acting 25 Mg 453 Quetiapine Tablet 50 Mg 454 Quetiapine Tablet Sr 100 Mg 455 Aripipralzole Tablet 10 Mg 456 Aripiprazole Tablet 15 Mg 457 Aripiprazole Tablet 5 Mg 458 Olanzapine Tablet 20 Mg 459 Olanzapine Tablet 10 Mg 460 Olanzapine Injection 405 Mg 461 Olanzapine Injection 10 Mg 462 Olanzapine Injection 210 Mg Long Acting 463 Olanzapine Injection 300 Mg Long Acting 464 Clozapine Tablet 100 Mg 465 Clozapine Tablet 50 Mg 466 Amitriptyline Tablet 10 Mg 467 Amitriptyline Tablet 25 Mg 468 Fluoxetine Capsule 20 Mg 469 Imipramine Tablet 25 Mg 470 Sertraline Tablet (Sr) 50 Mg 471 Sertraline Tablet 100 Mg 472 Escitalopram Tablet 10 Mg 473 Paroxetine (Cr) Tablet 25 Mg 474 Paroxetine Tablet (Cr) 12.5 Mg 475 Capsule Venalafaxine Extended Release 37.5 Mg 476 Capsule Venalafaxine Extended Release 75 Mg 477 Gabapentin + Nortriptyline (400/10Mg) Tablet 478 Mirtazapine Tablet 15 Mg 479 Dothiepin Tablet 25 Mg 480 Lithium Carbonate Tablet 300 Mg 481 Lithium Tablet 400 Mg Sr 482 Alprazolam Tablet 0.25 Mg 483 Alprazolam Tablet 0.5 Mg 484 Donepezil Tablet 5 Mg 485 Donepezil Tablet 10 Mg 486 Clonazepam Tablet 0.5 Mg 487 Clonazepam Tablet 1 Mg 488 Donepezil Injection 10 Mg 489 Etizolam Tablet 0.50 Mg 490 Duloxetine Tablet 30 Mg 491 Bupropion Tablet 150 Mg 492 Buprinorphine Tablet 2 Mg 493 Buprinorphine Tablet 0.4 Mg 494 Disulfiram Tablet 250 Mg 495 Disulfiram Tablet 500 Mg 496 Nicotin Chewgum 2 Mg 497 Nicotin Chewgum 4 Mg 498 Naltrexone Tablet 50 Mg 499 Amisulpride Tablet 50 Mg 500 Pregablin 75Mg +Methylcobalmin 1500Mg +Nortriptylline 10Mg 501 Methylphenidate Tablet 5 Mg 502 Memantine Tablet 5 Mg 503 Tranylcypromine Tablet 5 Mg 504 Desvenlafaxine Tablet 50 Mg 505 Buprenorphine Transdermal Patch 10 Mcg/Hour 506 Buprenorphine Transdermal Patch 20 Mcg/Hour 507 Lacosamide Tablet 100 Mg 508 Blonanserin Tablet 4 Mg 509 Breviteracetam Tablet 50 Mg 510 Eeg Paste 511 Agomelatine Tablet 25 Mg 512 Vortioxetine Tablet 10 Mg 513 Melatonin Tablet 3 Mg 514 Tadalafil 10 Mg 515 Perampenel 2 Mg 516 Fluvoxamine 150 Mg 517 Ursodeoxycholic Acid Tablet 300 Mg 518 Cariprazine Tablet 1.5 Mg 519 Atomoxitine Capsule 10 Mg 520 Betahistine Tablet 8 Mg 521 Lamotrigine Tablet 25 Mg 522 Salbutamol Tablet 4 Mg 523 Salbutamol Syrup 2 Mg/5 Ml, 100 Ml Bottle 524 Salbutamol Inhaler Areosol 100 Microgram/ Dose, Mdi, Single Packing 525 Salbutamol Nebulizer /Respirator Sol. 2.5Mg, 2.5Ml Respule 526 Etophylline + Theophylline Tablet 231 Mg + 69 Mg (Sr) 527 Etophylline + Theophylline Injection 169.4 Mg + 50.6 Mg/2 Ml Ampoule 528 Budesonide Inhalation 200 Mcg/Dose, 200 Mdi/Dpi 529 Budesonide Nasal Spray 100 Mcg/Dose, Single Unit 530 Budesonide Respirator Solution For Use In Nebulizer 1 Mg, 2Ml Respule 531 Ipratropium Respirator Solution For Use In Nebulizer 250Mcg/ 1Ml, 2 Ml Respule 532 Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg 533 Aminophylline Injection 25 Mg/ Ml, 10 Ml Ampoule 534 Budesonide + Formoterol Inhalation (200 Mcg + 6 Mcg), 120 Mdi 535 Cough Syrup Diphehydramine 14.08 Mg + Ammonium Chloride 138 Mg + Sodium Citrate 57.03Mg + Menthol Ip 1.14 Mg/5 Ml, 100 Ml Bottle 110 Ml Bottle 536 Cough Syrup Diphehydramine 14.08 Mg + Ammonium Chloride 138 Mg + Sodium Citrate 57.03Mg + Menthol Ip 1.14 Mg/5 Ml, 100 Ml Bottle - 537 Cough Syrup Ambroxol 15 Mg+ Terbutaline Sulphate 1.25 Mg+ Guaiphenesin 50 Mg+ Menthol 2.5 Mg, 100 Ml Bottle 538 Doxofylline Tablet 400 Mg 539 Dextromethorphan (15Mg/5Ml)+Chlorpheniramine Maleate (2Mg/5Ml) +Phenylephrine Hcl (5Mg/Ml) Oral Syrup, 100 Ml Bottle 540 Caffeine Citrate Injection 20 Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) 541 Caffeine Citrate Oral Solution 20 Mg/Ml,3Ml 542 Clarithromycin Tablet 500 Mg 543 N- Acetylcysteine Tablet 600 Mg 544 Glycopyrronium 25 Mcg + Formoterol Fumarate 12 Mcg Rota Caps 545 Oral Glucose 75 Gm 546 Dextrose Intravenous Infusion Ip 5 % W/V , 500 Ml Ffs Bottle 547 Dextrose Intravenus Infusion Ip 10% W/V, 500 Ml Ffs Bottle 548 Dextrose Intravenous Infusion Ip 25% W/V, 100 Ml Ffs Bottle 549 Dextrose 5 % W/V With Sodium Chloride 0.9% W/V For Intravenous Infusion 500 Ml Ffs Bottle 550 Multi Electrolyte Injection (Isolyte P Multiple Electrolyte & Dextrose Injection Type 1 ), 500 Ml Ffs Bottle 551 Potassium Chloride Oral Solution 10%, 100 Ml Bottle 552 Potassium Chloride (Solution) Injectable 15% (150Mg/Ml) , 10 Ml Amp. 553 Ringer Lactate (Solution ) For Injection ( Compound Sodium Lactate) 500 Ml Ffs Bottle 554 Normal Saline (Sodium Chloride) Injection Solution 0.9% Isotonic, 100Ml 555 Normal Saline Injection 3% 556 Normal Saline (Sodium Chloride) Injection 0.9% W/V, 500 Ml Bottle ( Ffs Technology) 557 Water For Injection 5Ml Ampoule 558 Injection Human Albumin 5% Infusion Solution 5% 559 Injection Human Albumin 20% Infusion Solution 20 560 Ascorbic Acid Tablet 500 Mg 561 Pyridoxine Tablet 10 Mg 562 Pyridoxine Tablet 100 Mg 563 Vitamin A Oral Solution 100000 Iu/Ml, 100 Ml 564 B-Complex Tablet 565 Vitamin D3 Drops 400 Iu/Ml 566 Vitamin D3 Tablet (Chewable) 60000Iu 567 Calcium Salts 500 Mg+ Vitamin D3 250 Iu Tablet 568 Thiamine Injection 100 Mg/Ml, 2 Ml Vial 569 Calcium Phosphate Suspension/Syrup:- Each 5Ml Contains: Vit D3 (Cholecatciferol) Ip-200Iu Vitamin B12 (Cyanocobalamin) Ip 2.5Mcg, Calcium- 82Mg (As A Mixture Of Calcium Phosphats Calculated As 0.12G Ca3 (Po4) 2 Suspension/Flavoured Syrupy Base- Q.S. 200Ml Bottle. 570 \Hematinic With Amino Acids Vitamin And Zinc Syrup 200 Ml Bottle, Each 10 Ml Contains: Ferrous Glycine Sulphate-216.50Mg, L-Histidine Hcl-25.0 Mg, Pyridoxine Hydrochloride Ip-1.5 Mg, Nicotinamide Ip-25.0 Mg, Folic Acid Ip-0.5 Mg, Cyanocobalamin Ip-2.5 Mcg, Zinc Ascorbate 50 Mg, Approved Colors Used\ 571 Multi Vitamin Infusion 10 Ml: Each Ml Contains Vitamin A (As Vitamin A Concentrate Oily Form) Lp 1100 Lu, Cholecalciferol Lp 100 Lu, Tocopheryl Acetate Lp 0.5Mg, Nicotinamide Lp 10Mg, Riboflavin Sodium Phosphate Lp 1.4Mg, Pyridoxine Hydrochloride Lp 1.65Mg, Thiamine Hydrochloride Lp 5.0Mg, Ascorbic Acid Ip 50.0Mg, L-Cysteine Hydrochloride Usp 0.2Mg, Benzyl Alcohol (As Preservative) Lp 1.0% V/V, Water For Injections Lp Q.S 572 Methylcobalamin Tablet 1500 Mcg 573 Pregabalin 75 Mg+ Methylcobalamin 1500 Mcg Tablet 574 Alfacalcidol Soft Gelatin Capsule 0.25 Mcg 575 Biotin Tablet 10 Mg 576 Thiamine Tablet 100 Mg 577 10 Essential Amino Acid With Vitamins And Minerals Capsules (10X10) 578 Amino Acid Iv Infusion Minimum 10 Essential Amino Acids, 250Ml Bottle - 579 Artesunate Injection 60 Mg/Ml 580 Chloroquine Phosphate Injection 40 Mg/Ml 581 Chloroquine Phosphate Tablet 250 Mg, Equivalent To 155 Mg Chloroquine Base 582 Chloroquine Phosphate Oral Solution 50 Mg/ 5 Ml, 50 Ml Bottle 583 Primaquine Tablet 2.5 Mg 584 Primaquine Tablet 7.5 Mg 585 Primaquine Tablet 15 Mg 586 Quinine Sulphate Tablet 300 Mg 587 Quinine Dihydrochloride Injection 300 Mg/Ml, 2 Ml Ampoule 588 Sulfadoxine + Pyrimethamine Tablet 500 Mg + 25 Mg 589 Temphos 50% Ec 5 Liter Pack 590 Malathion Technical 95%, 250 Kg 591 Deltamethrin 2.5% Wp, 25 Kg 592 Cyphenothrin 5% Ecs (Insecticide/Adulticide For Fogging) 593 Bivalent Antigen Based Rapid Diagnostic Kit For Malaria 594 Pyrethrum Extract 2% 595 Dengue Ns1 Antigen Elisa Based Test Kit,96 Test/Kit - 596 Mac Elisa Igm Dengue Kit 597 Sofosbuvir 400 Mg Tablet + Ledipasvir 90 Mg Tablet 598 Sofosbuvir 400 Mg Tablet 599 Daclatasvir 60 Mg Tablet 600 Daclatasvir 30 Mg Tablet 601 Entecavir 1 Mg Tablet 602 Entecavir 0 .5 Mg Tablet 603 Ribavirin Capsules 200 Mg 604 Tenofovir Tablet 300 Mg 605 Sofosbuvir 400Mg+ Velpatasvir 100 Mg Tablet 606 Rtpcr Kits For Quantitative Viral Load Test For Hepatitis B Virus 607 Rtpcr Kits For Quantitative Viral Load Test For Hepatitis C Virus 608 Storage Vial 5 Ml 609 Racked Filter Pipette Micro-Tips(Sterile) 10 Ul 610 Racked Filter Pipette Micro-Tips(Sterile) 20 Ul 611 Racked Filter Pipette Micro-Tips(Sterile) 1000 Ul 612 Racked Filter Pipette Micro-Tips(Sterile) 200 Ul 613 Filter Pipette Micro-Tips (Sterile) 10 Ul 614 Filter Pipette Micro-Tips (Sterile) 20 Ul 615 Filter Pipette Tips (Sterile) 100 Ul 616 Filter Pipette Tips (Sterile) 200 Ul 617 Filter Pipette Tips (Sterile) 1000 Ul 618 Ethanol Imported (20 Bottles Per Bottle) 5 Liter Pack 619 Molecular Biology Grade Water As Per Requirement 620 Screw Capped Storage Vial 2Ml (500 Vials) Per Pack 2 Ml 621 100 Well Micro Tube Storage Box 622 Para Film 623 Blue Nitrile Gloves 624 Single Channel Variable Volume Micropipette 0.5-10 Ul 625 Single Channel Variable Volume Micropipette 02-20 Ul 626 Single Channel Variable Volume Micropipette 05-50 Ul 627 Single Channel Variable Volume Micropipette 10-100 Ul 628 Single Channel Variable Volume Micropipette 20-200 Ul 629 Single Channel Variable Volume Micropipette 100-1000 Ul 630 96 Well Qper Plates With Adhesive Optical Scaling Membrane 631 Individual Pcr Tubes 8-Tube Strips(Clear) 632 Optical Flat 8-Cap Strips 0.2Ml Tube Strips 633 8 Channel Variable Value Micropipette 2-20 Ul 634 Micro Centrifuge Tubes Mctival (Sterile) 2 Ml 635 96 Well Reversible Rack F 0.5 To 2.0Ml Vials 636 Rnase And Dnase Degradation Solution 637 Rnase And Dnase Degradation Solution Wipes 638 Dna Blood Extraction Kit 639 Viral Rna Extraction Kit 640 Purified Freeze €“ Dried Human Coagulation Factor Viii, Virus Inactivated Injection 250 Iu 641 Anti Hemophillic Factor Ix Vial Injection Size 500 Iu 642 Anti Hemophillic Factor Vii Injection 1Mg,Vial/Ampoule 643 Anti Hemophillic Factor Vii Injection 2Mg,Vial/Ampole 644 Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 500 Iu,Vial/Ampoule 645 Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 1000 Iu,Vial/Ampoule 646 Recombinant Anti Haemophilic Factor Viii (Rf Viii)Standard Half Life Injection 250 Iu 647 Recombinant Anti Haemophilic Factor Viii (Rf Viii)Extended Half Life Injection 500 Iu 648 Recombinant Anti Haemophilic Factor Ix(Rf Ix )Standard Half Life Injection 250 Iu 649 Recombinant Anti Haemophilic Factor Ix (Rf Ix)Extended Half Life 500 Iu 650 Emicizumab-Kxwh Injection 30 Mg/Ml 651 Emicizumab-Kxwh Injection 60 Mg/0.4 Ml 652 Anti Haemophilic Factor Ix Vial Injection 600Iu 653 Leuco Reduction Filter Bed Side For Packed Red Blood Cells - 654 Sanitary Napkin 655 Weekly Iron Folic Acid Tablet Each Tablet Containing 60 Mg Elemental Iron+500 Mcg Folic Acid, Sugar Coated ,Blue Colour 656 Iron And Folic Acid Tablet ( Wifs Junior ) Containing Dried Ferrous Sulphate Ip Equivalent To Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet. Tablet Are Sugar Coated And Pink Coloured Tablets With Only Edible Colours Used Tablet Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet 657 Salt Testing Kit 658 Oseltamivir Tablet 75 Mg 659 Oseltamivir Tablet 45 Mg 660 Oseltamivir Tablet 30 Mg 661 Oseltamivir Syrup (Each 1 Ml Reconstituted Suspension Contain 12 Mg Oseltamivir, 75 Ml Bottle) Syrup 662 Seasonal Influenza Quadrivalent/ Tetravalent Vaccine 663 Deferiprone Tablet 500 Mg 664 Deferasirox Tablet 500 Mg 665 Desferrioxamine Injection 500 Mg 666 Medroxyprogesterone Acetate Injection Ip (Dmpa ) 25 X 1X 1Ml (Contraceptive Injection For Im Use Only) 667 Single Blood Bags 350 Ml 668 Double Blood Bags 350 Ml 669 Triple Blood Bags 450 Ml 670 Quadruple Blood Bags 450 Ml 671 Double Blood Bag 450 Ml 672 Triple Blood Bags 350 Ml 673 Triple Blood Bag With Sagm 350 Ml 674 Triple Blood Bag With Sagm 450 Ml 675 Quadruple Blood Bag With Sagm 350 Ml 676 Quadruple Blood Bag With Sagm 450 Ml 677 Hiv Elisa (96 Test Each) 678 Hbsag Elisa (96 Test Each) 679 Hcv Elisa (96 Test Each) 680 Hiv Rapid (30 Test Each) 681 Hbsag Rapid (30 Test Each) 682 Hcv Rapid (30 Test Each) 683 Rpr/Vdrl (50 Test Each) 684 Reagents Anti-A, Anti-B, Anti-D Sera 685 Reagents Anti-Ab Serum 686 Reagents Antihuman Globulin Serum 687 Reagents Anti-A1 (Lectin) Serum 688 Reagents Bovine Albumin 22% 689 Aprepitant 80Mg (Kit Contains 3 Caps) 690 Aprepitant Kit 120 Mg 691 Bleomycin Injection 15 Mg, 15 Mg/Ml Vial 692 Capecitabine Tablet 500 Mg 693 Capecitabine Tablet 1000 Mg 694 Carboplatin Injection 150 Mg, 10 Mg/Ml Vial 695 Carboplatin Injection 450 Mg, 10Mg/Ml Vial 696 Cisplatin Injection 50 Mg, 1 Mg/Ml Vial 697 Cisplatin Injection 10 Mg 698 Cyclophosphamide Injection 1000Mg, 1.33Mg/Ml Vial 699 Cyclophosphamide Injection 500Mg, 10Mg/Ml Vial 700 Cyclophosphamide Tablet 50 Mg 701 Dacarbazine Injection 200 Mg, 10Mg/Ml Vial 702 Dacarbazine Injection 500 Mg 703 Docitaxel Injection 120 Mg, 20Mg/ 0.5 Ml Vial 704 Doxorubicin (Hydrochloride Powder) Aqueous Solution 10Mg/2Ml 705 Doxorubicin (Hydrochloride Powder) Aqueous Solution 50 Mg/ 2 Ml Vial 706 Epirubicin Injection 50 Mg, 2Mg/Ml Vial 707 Epirubicin Injection 10 Mg, 2Mg/Ml Vial 708 Etoposide Injection 100Mg, 20Mg/Ml Vial 709 Etoposide Capsule 50 Mg 710 5-Fluorouracil Injection 500Mg, 50Mg/Ml Ampules 711 Fluorouracil Injection 1 Mg 712 Filgrastim Injection 300Mcg, 300Mcg/0.5 Ml Prefilled Syringe 713 Peg Filgrastim Injection 6 Mg 714 Geftinib Tablet 250 Mg 715 Gemcitabine Injection 200Mg, 100Mg/Ml Vial 716 Gemcitabine Injection 1000Mg, 10Mg/Ml Vial 717 Imatinib Tablet 400 Mg 718 Isophosphamide Injection 200Mg, 100Mg/Ml Vial 719 Lenalidomide Tablet 10 Mg 720 Letrozole Tablet 2.5 Mg 721 Oxaliplatin Injection 50Mg, 5Mg/Ml Vial 722 Oxaliplatin Injection 100Mg, 5Mg/Ml Vial 723 Paclitaxel Injection 260Mg, 10Mg/1.67 Ml Vial 724 Pemetrexate Injection 500Mg, 25Mg/Ml Vial 725 Tamoxifen Citrate Tablet 20 Mg 726 Tamoxifen Citrate Tablet 10 Mg 727 Vinblastine Injection 10 Mg, 1Mg/Ml Vial 728 Vincristine Injection 1 Mg, 1Mg/Ml Vial 729 Ateplase Injection 20 Mg 730 Ateplase Injection 50 Mg 731 Tenecteplase Injection 20 Mg 732 Rituximab Injection 500 Mg 733 Methotrexate Injection 50 Mg 734 Methotrexate Tablet 50 Mg 735 Zolidronic Acid Injection 4 Mg 736 Actinomycin Injection 0.5 Mg 737 Goserline Injection 10.8 Mg 738 Luperolide Injection 22.5 Mg 739 Degaralix Injection 240 Mg 740 Thalidomide Tablet 100 Mg 741 Exemestene Tablet 1 Mg 742 Sunitinib Tablet 50 Mg 743 Pazopanib Tablet 200 Mg 744 Dexamethasone Tablet 4 Mg 745 Dexamethasone Tablet 8 Mg 746 Erlotinib Tablet 100 Mg 747 Morphine Tablet 10 Mg 748 Morphine Tablet 30 Mg Sr 749 Buprinorphine Patch 5 Mg 750 Buprinorphine Patch 10 Mg 751 Buprinorphine Patch 15 Mg 752 Iohexol Injection 300 Mg 753 Zoledronic Acid Injection 4 Mg 754 Trastuzumab Injection 150 Mg 755 Trastuzumab Injection 450 756 Onco Bcg Injection 757 Onco Bcg 80Mg Injection 758 Mitomycin Injection 40 Mg 759 Granisetron Injection 1 Mg 760 Leucovorin Injection 50 Mg 761 Bortezomib Injection 2 Mg 762 Ifosfamide Injection 1 Gm 763 Mesna Injection 400 Mg 764 Carfilzomib Injection 60 Mg 765 Bicalutamide Tablet 50 Mg 766 Sorafenib Tablet 200 Mg 767 Temozolamide Tablet 100 Mg 768 Temozolamide Tablet 250 Mg 769 Clindipine Tablet 10 Mg 770 Codon Set 771 Codon I/V Set Woth Air Vent & 0.2 Micron Filter 772 Granisetron Injection 3 Mg 773 Reteplase Injection 10.4 U(18.1 Mg) Kit 774 Meropenum Injection 125 Mg 775 Meropenum Injection 500 Mg 776 Piperacillin 1 Gm + Tazobactum 0.12Gm Injection 777 Piperacillin 4 Gm + Tazobactum 0.5Gm Injection,Vial Injection 4 Gm+ 0.5 Gm 778 Netilmycin Injection 25Mg/Ml 779 Ethamsylate Injection 250 Mg/2 Ml 780 Dns ( Sodium Chloride And Dextrose, Each 100 Ml Contains Dextrose 5 Gm, Nacl 0.9 G) 781 Calcium Syrup Each 5 Ml Contains Calcium 250Mg, Vitamin D3 125 Iu 782 Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) 783 Ecg Electrodes (Neonate) 784 Umbilical Catheter No. 5, (5 Fr Length 37 Cm, -31Ml/Min Pvc 785 Umbilical Catheter No. 6 (6 Fr Length 37 Cm, -31Ml/Min Pvc 786 Oxygen Tubing, Suction Tubing (Different Colours) 787 Triway (Three Way Stop Clock) Lipid Resistant Pyrogen Free, Sterile, Latex Free 788 Bone Narrow Needle For Neonates 18 G 789 Blood Lancets For Glucometer 790 Grip Lock 791 Picc Line 24 G, 28 G 792 Suction Plain Catheter No. 6, Disposable Pyrogen Free 793 Suction Plain Catheter No. , 8 Disposable Pyrogen Free 794 Oxygen Hood For Neonates 795 T- Connector 796 Y- Connector For 8-10 Mm 797 Nasal Prongs Term & Preterm Single Patient Use With Twin Bore Nasal Pronges Sets, Extra Soft Medical Grade Nasal Tips 798 Nasal Prongs Preterm (Pead) 3.0 & 3.7 Mm - 799 Octopus Bi Connector (Length 1-10 Cm 1.5*2.5, 2-10 Cm 1.5*2.8)Pur Vol- 0.57 Ml 800 Q-Way 6 Inches ,Sterlized Using Ethylene Oxide 801 Tegaderm 2, 3/8 Inch*2.3/4 Inch 6*7 Cm Tegaderm Tm Films Iv Transparent Film Iv Transparent Film Dressing Style(Latex Free) 802 Uro Bag (Neonates)- 100 Ml 803 Dyna Plast Adhesive Tape ( 10 Cm Width, 5 Cm Length) 804 Surfactant- Survanta(Synthetic)(25 Mg/1Ml), Exosurf (Bovine) 805 Micro Drip Set 806 Transpore 2\ 807 Transpore 4\ 808 Chest Drain (Adults) 809 Disposable Needle 24 810 Anti Diptheria Serum 811 Td Vaccine 812 Erythromycin Tablet 250 Mg 813 Erythromycin Syrup 125 Mg/5 Ml, 60 Ml 814 Hepatitis B Vaccine (R Dna) I.P. 815 Urine Screening Through Dry Chemistry Rapid Testing Kit/Strips For Multiple Drug Uses:- 1. Morphine/ Opiates 2. Buprenorphine 3. Tramadol 4. D. Propoxyphene 5. Benzodiazepines Test Kit Kit 816 Nicotine Patches 817 1.Nicotine Patches 7Mg 2. Nicotine Patches 14Mg 818 Nicotine Pastilles 2 Mg 819 Nicotine Pastilles 4 Mg 820 Tablet Vareniciline 0.5Mg 821 Tablet Vareniciline 1 Mg 822 Tablet Buspirone 5 Mg 823 Anti Rabies Vaccine Through Id Route, 1 Ml Vials Vaccine 1Ml. 824 Tenofovir 300 Mg+ Lamivudine 300 Mg Tablet 825 Dolutegravir Tablet 50 Mg 826 Dual Kits For Hiv And Syphilis - 827 Levofloxacin Tablet 250 Mg 828 Pyridoxine Tablet 50 Mg 829 Moxifloxacin Tablet 400 Mg 830 Cbnaat Tb Cartridges - 831 Cbnaat-Xdr Cartriges 832 Ethambutol Tablet 100 Mg 833 Ethambutol Tablet 400 Mg 834 Ethambutol Tablet 800 Mg 835 Clofazimine Tablet 100 Mg 836 Clofazimine Tablet 50 Mg 837 Cycloserine Capsule 250Mg 838 Delamanid Tablet 50 Mg 839 Bedaquiline (Bpq) - L Tablet 840 Ethinamide Tablet 250 Mg 841 Isoniazid Tablet 100 Mg 842 Isoniazid Tablet 300 Mg 843 3 Hp Isoniazid Plus Rifapentine Fdc (300Mg/300Mg) Tablet 844 Rifapentine Tablet 150 Mg 845 Rifapentine Tablet 300 Mg 846 Rifampicin Tablet 150 Mg 847 Truenat Mtb Chips Test Kit 848 Truenat (Rip Chips) Test Kit - 849 Bbl Mgit Tubes For Use In Bactec Mgit 960 (7Ml) - 100 Tubes/Pkg Catalouge No 245122 850 Bactec Mgit 960 Supplement Kit (100 Tests, Panta And Oadc Combined) Catalogue No: 245124 Kit - 851 Bactec Mgit 960 Sire Kit. One Kit Is Sufficient For 40 Test Catalogue No: 245123 852 Genotype Mtbdr Si V2.0 96 Test 31796Am. Test Kits Composed Of 31796 A Genotype Mtbdr Si V2.0 - 853 Genotype Mtbdr Plus V2.0 30496 Am. Test Kits Composed Of 30496A Genotype Mtbdr Plus Version 2.0 And 51610 Genolyse - 854 Gt Blot 48 Reagent Kits 855 Genolyse 96 Test 51610 856 2Fdc (P) (H50 & R75) 857 3Fdc Cp (A) (H75, R150 & E275) 858 3Fdc (P) (H50, R75, Z150) 859 4Fdc (A) (H75, R150, Z400 & E275) 860 Tablet Ethambutol 100 Mg 100 Mg 861 Rifampicin Tablet 300 Mg 862 Genolyse 96 Test 51610 - 863 Early Childhood Development (Ecd) Kit For Ashas - 864 Absorbant Cotton Gauze, 90 Cm X 18 Mtrs, Is No: 758:2023, Specification Mentioned Under Mdr-2017 As Amended From Time To Time ( 1X 5 Than) 865 Cotton Bandage Cloth, 15 Cm X 5 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) 866 Cotton Bandage Cloth, 10 Cm X 4 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) 867 Cotton Bandage Cloth, 5 Cm X 4 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) 868 Crape Bandages Bp(1 X 10 Rolls) 10 Cm X 4.5 Mtrs 869 Crape Bandages Bp(1 X 10 Rolls) 15 Cm X 4.5 Mtrs 870 Plaster Of Paris Bandages B.P. (1 X 10 Rolls) 10 Cm X 2.7 Mtrs, (High Strength) 871 Plaster Of Paris Bandages B.P (1 X 10 Rolls) 15 Cm X 2.7 Mtrs, (High Strength) 872 Cotton Wool Ip 100 Gm 873 Cotton Wool Ip 500 Gm 874 Orthopadding Cast/Zigzag Cotton Roll 4\ 875 Orthopadding Cast/Zigzag Cotton Roll 6\ 876 Disposable Syringes 2 Ml, (24G), Ribbon Pack 877 Disposable Syringes 5 Ml, (23G), Ribbon Pack, Reuse Preventable 878 Disposable Syringes 10 Ml. With Needle, Ribbon Pack 879 Disposable Syringes 2 Ml, (23G), Ribbon Pack 880 Disposable Syringes 1 Ml (23G), Ribbon Pack 881 Disposable Insulin Syringe (31G), Ribbon Pack 882 Disposable Syringe 20 Ml With Needle, Ribbon Pack 883 Disposable Syringe 50 Cc With Needle, Ribbon Pack 884 Disposable Syringes 2 Ml, (24G) Reuse Preventable 885 I.V. Canulas 24 With Luer Lock 886 I.V. Canulas 22 With Luer Lock 887 I.V. Canulas 20 With Luer Lock 888 I.V. Canulas 18 With Luer Lock 889 I.V. Canulas 16 With Luer Lock 890 I.V. Canulas 26 With Luer Lock 891 I.V.Sets Disposable With Air Vent 892 Blood Administration Set/Blood Transfusion Set. Transparent Cylindrical Drip Chamber With 200 Micron Filter. 150 Cm Long Smooth Kink Resistant Tubing. 893 Pedeatrics Iv Drip Set With Air Vent 894 Sterile Disposable Spinal Needle For Single Use 23G X 3 1/2 Inch 895 Sterile Disposable Spinal Needle For Single Use 25G X 3 1/2 Inch Clear/ Transparent Hub 896 Sterile Disposable Spinal Needle For Single Use 22 G X 3 1/2 Inch Clear/ Transparent Hub 897 Sterile Disposable Spinal Needle For Single Use 24 G X 3 1/2 Inch Clear/ Transparent Hub 898 Sterile Disposable Spinal Needle For Single Use 26 G X 3 1/2 Inch Clear/ Transparent Hub 899 Sterile Disposable Spinal Needle For Single Use 18 G X 3 1/2 Inch Clear/ Transparent Hub 900 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +17D 901 Endotracheal Tube, Cuffed No. 5.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.0Mm - 902 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +18D 903 Endotracheal Tube, Cuffed No. 6.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 6.0Mm - 904 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +19D 905 Endotracheal Tube, Cuffed No.6.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 6.5Mm - 906 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +20D 907 Endotracheal Tube, Cuffed No. 7.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 7.0Mm - 908 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +21D 909 Endotracheal Tube, Cuffed No. 7.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 7.5Mm - 910 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +22D 911 Endotracheal Tube, Uncuffed No. 4.5 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 4.5Mm - 912 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +23D 913 Endotracheal Tube, Uncuffed No. 2.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 2.5Mm - 914 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +24D 915 Endotracheal Tube, Uncuffed No. 3.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 3.0Mm - 916 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +25D 917 Endotracheal Tube, Uncuffed No. 3.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 3.5Mm - 918 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +17D 919 Endotracheal Tube, Uncuffed No.4.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 4.0Mm - 920 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +18D 921 Endotracheal Tube, Uncuffed No. 5.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.0 Mm - 922 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +19D 923 Endotracheal Tube, Cuffed No. 5.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.5Mm - 924 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +20D 925 Endotracheal Tube, Cuffed No. 8.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 8.0Mm - 926 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +21D 927 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +22D 928 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +23D 929 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +24D 930 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +25D 931 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +17D 932 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +18D 933 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +19D 934 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +20D 935 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +21D 936 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +22D 937 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +23D 938 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +24D 939 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +25D 940 Infant Feeding Tube 4 941 Infant Feeding Tube 5 942 Infant Feeding Tube 7 943 Infant Feeding Tube 9 944 Infant Feeding Tube, Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile, Size: 6Fg 945 Infant Feeding Tube, Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile, Size: 8Fg 946 Infant Feeding Tube:Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile 10 Fg 947 Ryles Tube 8 948 Ryles Tube 10 949 Ryles Tube 12 950 Ryles Tube 14 951 RyleS Tube/ Nasogastric Tube (P.V.C) With Radio Opaque Lining. Size:16, Soft , Kink Resistant Pvc Tubing For Atraumatic Intubation, Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation, Four Lateral Eyes For Greater Efficiency, Radio Opaque Line, Marking At 50, 60, 70 Cm From Tip, Colour Coded Funnel, With Luer Connector/Closure, Length 105 Cm 952 Mucous Suction Trap 953 Foleys Catheter 8 954 Foleys Catheter 10 955 Foleys Catheter 12 956 Foleys Catheter 18 957 Foleys Ballon Catheter 2 Way ( Silicon Elastomer ) Non- Toxic Pyrogen Free Sterile For Single Use Only , Size 14, Single Sterile Packing 958 Foleys Ballon Catheter 2 Way ( Silicon Elastomer ) Non- Toxic Pyrogen Free Sterile For Single Use Only , Size 16, Single Sterile Packing 959 Urine Bag 2000 Ml, Single Unit Packing 960 Disposable Surgical Gloves No. 6.5, Isi Mark 961 Disposable Surgical Gloves No. 7, Isi Mark 962 Disposable Surgical Gloves No. 7.5, Isi Mark 963 Disposable Surgical Gloves No.6 , Isi Mark 964 Examination Gloves (Medium Size), Isi Mark 965 Micropore/Surgical Paper Tape 25Mm X 9.1Mtr. 966 Micropore/Surgical Paper Tape 50Mm X 9.1 Mtr. 967 Micropore/Surgical Paper Tape 75Mm X 9.1 Mtr. 968 Disposable Shoe Cover 969 Disposable Mask 970 Disposable Cap 971 Sterile Cord Clamp Non Toxic, Pyrogen Free Sterile For Single Use Only Single Unit Packing 972 Ecg Electrodes (Disposable Kit) Pack Of 6 973 Ot Sponges With Radio-Opaque Thread (With 8 Layers 30 Cm X 30 Cm ) 974 Carbolic Acid 400 Ml 975 Opsite Eye Drape Sheet With Drain Pouch 70 Cm X 70 Cm 976 Blades For Eye Surgery Crescent 977 Blades For Eye Surgery Side Port 15° 978 Blades For Eye Surgery Keratones 2.8 Mm 979 Blades For Eye Surgery Implant 5.2 Mm 980 Karman/ Mtp Cannula No. 6, Single Unit 981 Karman/ Mtp Cannula No. 7, Single Unit 982 Karman/ Mtp Cannula No. 8, Single Unit 983 Mr Cannula No. 5 984 Mr Cannula No. 6 985 Mr Cannula No. 7 986 Mr Cannula No. 8 987 Disposable Sterile ,Powder Free Gloves For Eye Surgeries Surgical Gloves 6.5 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 6.5 988 Disposable Sterile, Powder Free Gloves For Eye Surgeries Surgical Gloves 7 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 7 989 Disposable Sterile, Powder Free Gloves For Eye Surgeries Surgical Gloves 7.5 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 7.5 990 Ecg Paper 215 Mm*20 Mtr, Roll 991 Ecg Paper 50 Mm*20 Mtr, Roll 992 Ecg Paper 50 Mm*30 Mtr, Roll 993 Ecg Paper 60 Mm* 15 Mtr, Roll 994 Ecg Roll Big 995 Ecg Roll Small 996 Ecg Jelly 200 Ml Bottle 997 Ultrasound Jelly 200 Ml Bottle 998 Absorbable Gelatin Sponge, 80 X 50X 10 Mm, Single Unit 999 Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 6 Cm X 11 Cm (3 To 6 Units Of Mesh In One Box). 1000 Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 15 Cm X 15 Cm (3 To 6 Units Of Mesh In Each Box) 1001 Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 10Cm X 15 Cm Oval (1 Foil In Each Box) For Lap Of Hernia (Should Be Antibacterial) 1002 Multilayer Tissue Separating Mesh With Polypropylene/Polyster And Polydioxanone /Collegen. 15Cm X 15 Cm Square /Circular 1003 Surgical Spirit Bp 500 Ml 1004 Sodium Hypochlorite Solution 10% 1005 Acetone 400 Ml 1006 Dodecylbispropylene Triamine 9.2Gm, Didecyldimethyl Ammonium Chloride 13.0 Gm For Fogging 1007 Ortho-Phthaldehyde 0.55% W/W Solution For Sterlization, 5 Liter 1008 Potassium Peroxomonosulphate 50% W/W Containig Aldehyde Free Disinfectant , 5 Kg 1009 Dark Eye Glasses 1010 Disposable Eye Patch 1011 I.O Dye (Rhex Id Dye) Each (Indigo Blue Dye) 1012 Surgical Blades11 (Pack Of 100) 1013 Surgical Blades15 (Pack Of 100) 1014 Surgical Blades20 (Pack Of 100) 1015 Surgical Blades23 (Pack Of 100) 1016 Surgical Blades 24 (Pack Of 100) 1017 Oxygen Venti-Mask (Pvc/Disposable)Adult 1018 Oxygen Venti-Mask (Pvc/Disposable)Medium 1019 Oxygen Venti-Mask (Pvc/Disposable)Paed. 1020 Nebulisation Set (Mask With Tubing With Chamber (Adult ) 1021 Nebulisation Set (Mask With Tubing With Chamber (Paediatric ) 1022 Diaper Paediatric (Extra Small Size For Neonates) 1023 Disposable Adhesive Cannula Fixator 1024 Patient Identification Band Mother & Child Size (Different Colours) 1025 Patient Identification Band Adult Size (Different Colours) 1026 Patient Identification Band Paediatric Size (Different Colours) 1027 Suction Catheter No. 10 , Single Unit 1028 Suction Catheter No. 16 , Single Unit 1029 Negative Suction Drain/Closed Round Drain 12 1030 Negative Suction Drain No.14 1031 Negative Suction Drain No. 16 1032 Disposable Plastic Urine Pan 1033 Disposable Plastic Bed Pan 1034 Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 5X 6 Cm 1035 Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 7X 9 Cm 1036 Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 6.5 Cm X 5 Cm (Pack Of 100) 1037 Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 15.5 Cm X 8.5Cm (Pack Of 100) 1038 Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 25 Cm X 10 Cm , (Pack Of 100) 1039 Skin Stapler Standard ( Single Unit) 1040 Airway Set Size 2, ( Single Unit) 1041 Airway Set Size 3, ( Single Unit) 1042 Airway Set Size 4, ( Single Unit) 1043 Airway Set Size 5, ( Single Unit) 1044 Ambu Bag Adult, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 7 K Pa ( 70 Cm H2O Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 1300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) 1045 Ambu Bag Ped, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 4 K Pa ( 40 Cm H2O Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) 1046 Courtery Lead ( Single Unit) 1047 Coutery Pad (Single Unit) 1048 Lega Clip Size Lt 300 (Titanium Ligating Clips Medium Size Having Lateral And Transverse Grooves On The Inner Clips), (Single Unit) 1049 Lega Clip Size Lt 400 (Titanium Ligating Clips Large Size Having Lateral And Transverse Grooves On The Inner Clips), (Single Unit) 1050 Shoulder Immobilizer Standard 1051 Pouch Arm Sling Standard 1052 Centre Line 1053 Cervical Collar Small Size (Soft) 1054 Cervical Collar Medium Size (Soft) 1055 Cervical Collar Large Size (Soft) 1056 Hard Cervical Collar (Universal) Size 1057 Chest Drain Catheter No.12 1058 Chest Drain Catheter No.14 1059 Chest Drain Catheter No.28 1060 Chest Drain Catheter No.32 1061 Chest Tube Drainage With Water Seal Bag No.28 1062 Chest Tube With Water Seal No.32 1063 Dj Stunt 1064 Dj Stunt No.5.5 1065 Dj Stunt No. 6 French End Closed 1066 Dj Stunt No 5/26 Both End Open 1067 Dj Stunt No 6/26 Both End Open 1068 Epidural Set 1069 Guide Wire Teflon Coated J Tip 1070 Guide Wire Teflon Coated V Straight Tip 1071 Spc Set (Suprapubic Catheter Set) 1072 Turp Loop 1073 Skin Traction Set Standard Size 1074 I.V. Flow Regulator Extension Sets 1075 Blades For Eye Surgery Keratones 3.2 Mm 1076 Balance Salt Solution (Bss For Eye Surgery) 500 Ml 1077 Craner Wire Splint 1078 Air Mattress 1079 Bb Splint (Bohler- Braun) 1080 Bed Side Pulley 1081 Skeletal Traction 1082 Disposable Needle 16 1083 Disposable Needle 23 1084 Disposable Needle 26 1085 Pmo Line 1086 Troponin T, Sensitivity:-Not Less Than 95.8%, Direct Whole Blood Test Kit 1087 3D Mesh For Lap Ingunal Hernia A)Right Side B)Left Side - 1088 Partial Absorble (10X6 Cm)Vicryl Mesh For Ipom 1089 Tackers For Mesh Fixation (Non Absorable) 1090 Measured Volume Fluid Infusion Set With 110Ml/150Ml Chamber - 1091 Medical X-Ray Films(1X50) 8\X10\ 1092 Medical X-Ray Films(1X50) 10\X12\ 1093 Medical X-Ray Films(1X50) 12\X15\ 1094 Medical X-Ray Films(1X50) 14\X14\ 1095 Medical X-Ray Films(1X50) 14\X17\ 1096 Agfa Cr Film (Dt2B)(1X100) 8\X10\ 1097 Agfa Cr Film (Dt2B)(1X100) 10\X12\ 1098 Agfa Cr Film (Dt2B)(1X100) 11\X14\ 1099 Agfa Cr Film (Dt2B)(1X100) 14\X17\ 1100 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle 1101 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle 1102 Catgut Suture (Chromic Catgut)Usp 1, 76 Cm X 63 Mm, 3/8 Circle (12 Foils In Each Box) Round Body Needle - 1103 Chromic Catgut Absorbable Suture Usp 1,76Cm Length 1/2 Circle 40Mm, Round Body Needle (12 Foils In Each Box) 1104 Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle 1105 Silk Sutupak Usp 1, 75 Cm (12 Foils In Each Box) 1106 Silk Suture Usp 0, 76Cm X 45 Mm , 3/8 Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) 1107 Silk Suture Usp 3-0, 90 Cm X 16 Mm , 3/8 Circle Type Of Needle- Cutting (12 Foils In Each Box) 1108 Polyglactin (Violet) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box)Should Be Antibacterial 1109 Polyglactin (Violet) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) Should Be Antibacterial 1110 Polyglactin (Violet) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box)Should Be Antibacterial 1111 Polyglactin (Plain) Vicryl Usp-1, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle Reverse Cutting - 1112 Polyglactin Synthetic Braided Absorbable Suture, Usp-1, 90Cm Length, Violet 1/2 Circle 40Mm Round Body Needle (12 Foils In Each Box) 1113 Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1114 Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied (12 Foils In Each Box) 1115 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle (12 Foils In Each Box) 1116 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body (12 Foils In Each Box) 1117 Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1118 Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) 1119 Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle.Should Be Antibacterial. 1120 Knotless Control Device Polygecaprone 3/8 Circle Reverse Cutting Needle 24 Mm Spril Unidireectional 30Cm With Antibactreal Triclosan Coated 3/0 - 1121 Knotless Control Device Polygecaprone 1/2 Circle , 40 Mm ,Taper Point,Ct,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 1/0 - 1122 Knotless Control Device Polygecaprone 1/2 Circle , 36 Mm ,Taper Point,Ct,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 1 1123 Knotless Control Device Polygecaprone 1/2 Circle , 26 Mm ,Taper Point,Sh,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 2/0 1124 Silver Alloy Non-Gamma-2 Lathe Cut Alloy 1125 Mercury Pure Triple Distilled 1126 Cavity Varnish 5% Sodium Fluoride 1127 Calcium Hydroxide, Powder 1128 Topical Fluoride Apf Gel 1.25% 1129 Gum Paint 1130 Edta 17 % Paste Form. 1131 Pulp Devitalizer 1132 Rubber Dam Kit 1133 Air- Rotor Diamond Burs No. 1 (Inverted Bur) 1134 Air- Rotor Diamond Burs No. 1 (Straight End Taper) 1135 Air- Rotor Diamond Burs No. 1 (Round) 1136 Air- Rotor Diamond Burs No. 1 (Straight) 1137 Air- Rotor Diamond Burs No. 1 (Flame) 1138 Air- Rotor Diamond Burs No. 2 (Inverted Bur) 1139 Air- Rotor Diamond Burs No. 2 ( Straight End Taper) 1140 Air- Rotor Diamond Burs No. 2 (Round) 1141 Air- Rotor Diamond Burs No. 2 (Straight) 1142 Air- Rotor Diamond Burs No. 2 (Flame) 1143 Air- Rotor Diamond Burs No. 3 (Inverted Bur) 1144 Air- Rotor Diamond Burs No. 3 ( Straight End Taper) 1145 Air- Rotor Diamond Burs No. 3 (Round) 1146 Air- Rotor Diamond Burs No. 3 (Straight) 1147 Air- Rotor Diamond Burs No. 3 (Flame) 1148 K-Files - Size- 15-40 , Length:-21 Mm , Should Have Rubber Stopper 1149 K-Files - Size- 15-40 , Length:-25 Mm , Should Have Rubber Stopper 1150 K- Files Size- 45-80, Length:-25 Mm, Should Have Rubber Stopper 1151 K-Files Size- 6, Length :- 21 Mm , Should Have Rubber Stopper. 1152 K-Files Size- 6, Length :- 25 Mm , Should Have Rubber Stopper. 1153 K-Files Size- 8, Length :- 21 Mm , Should Have Rubber Stopper. 1154 K-Files Size- 8, Length :- 25 Mm , Should Have Rubber Stopper. 1155 K-Files Size- 10, Length :- 21 Mm , Should Have Rubber Stopper. 1156 K-Files Size- 10, Length :- 25 Mm , Should Have Rubber Stopper. 1157 Niti Hand Files (21 Mm) Size- 15-40, For Curved Canals 1158 H-Files , Size-15-40 , Length :-21 Mm, Should Have Rubber Stopper 1159 H-Files , Size-45-80, Length :-25 Mm Should Have Rubber Stopper 1160 Matrix Strips,Made From A Thin, Strong, Flexible, Transparent Material Such As Mylar 1161 Barbed Broaches , Made Of Stainless Steel, Can Be Sterilized Length ‰¥ 21 1162 Articulating Paper Strip, Red Colored With Sufficient Thickness Double Side 1163 Articulating Paper Strip, Blue Colored With Sufficient Thickness Double Side 1164 Matrix Band Retainer , No. 1 1165 Matrix Band Retainer , No.8 1166 Matrix Band , No. 1, Toflemire 1167 Matrix Band , No. 8, Toflemire 1168 Paper Point 25 1169 Paper Point 30 1170 Paper Point 35 1171 Mini Plates Isi/ Iso/Ce/Marked. 1172 Arch Bar Length 1Feet Isi/ Iso/Ce/Marked. 1173 Air Rotor Cartridges (Nsk) Supertorque, Standard Head Isi/ Iso/Ce/Marked. 1174 Composite Finishing Kit- Disc Type 1175 Composite Finishing Kit With 12 To 24 Finishing Point Of Different Shapes. The Durable Abbresive Points Are Autoclavabal And Cost Effective, Comprehensive Selection Of Plain For Finishing And Polishing In One Kit, For Fast And Efficient Finishing The Use Of Conjunction With The Composite Polishing Kit, Average Speed 5000 To 12000 Rpm Kit - 1176 Iopa Film Size 30 Mm X 40 Mm 1177 Iopa Film Size 31 Mm X 41Mm 1178 Formocresol Formalin, Cresol Glycerin ,Formocresol Formalin Bp 20% V/V , Cresol Ip 32% V/V , Glycerin Ip Qs 1179 Dental Chair Covering Sterilized Cling Foil Rolls Isi/ Iso/Ce/Marked. 1180 Small Cotton Rolls For Isolation Isi/ Iso/Ce/Marked(Length-37Mm, Dia-8-10Mm) 1181 Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Pale Yellow Powder & Liquid 15Gm Powder & 10 To 13 Liquid 1182 Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Yellow Brown Powder & Liquid 15Gm Powder & 10 To 13 Liquid 1183 Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Dark Grey Powder & Liquid 15Gm Powder & 10 To 13 Liquid 1184 Pit & Fissure Sealant ( 6 Ml Bottle) Solution With High Flouride Releasing, Low Viscocity, High Retention, Rapid Cure & Low Solubility Liquid 6 Ml 1185 Calcium Hydroxide , Paste System Based And Catalyst -Radiopaque, 4 Gm Paste 4 Gm 1186 Zinc Phosphate Cement , 20 Gm Powder And 10 Ml Liquid Powder & Liquid 20 Gm Powder And 10 Ml Liquid 1187 Glass Ionomer Cement- Type-Ix, High Strenth For Posterior Teeth, Chemical Setting Without Shrinkage, Strontium Based, High Flouride Releasing, 12 To 15 Gm Powder And 5 To 10 Gm Liquid Powder & Liquid 12 To 15 Gm Powder & 5 To 10 Ml Liquid 1188 Hybrid Composite Resin For Anteriors (All Shades), High Strength, Long Lasting Wear Resitance, Great Handling Without Stick, 4 Gm Isi/ Iso/Ce/Marked. 4 Gm 1189 Mineral Trioxide Aggregate, 0.5 Gm Isi/ Iso/Ce/Marked. 0.5 G 1190 Flowable Composite 2 Mg Syringe, Flowable Consistancy Thicsotrophic, Low Shrinkage, Radiopaque, Easily Polishability, Should Be Hybrid, Wear Resistance, Syringe Design To Eleminate Bubbles 2 Mg 1191 Niti Rotory Files 4%, 21 Mm (Pkt Of 6) Refill Pack Of(#15,#20,#25,#30,#35,#40) 21 Mm 1192 Niti Rotory Files 4%, 25 Mm (Pkt Of 6) Refill Pack Of (#15,#20,#25,#30,#35,#40) 25 Mm 1193 Niti Rotory Files 6%, 21 Mm (Pkt Of 6) Refill Pack Of( #15,#20,#25,#30,#35,#40) 21 Mm 1194 Niti Rotory Files 6%, 25 Mm (Pkt Of 6) Refill Pack Of( #15,#20,#25,#30,#35,#40) 25 Mm 1195 Crown Cutting Kit, Set Of 14 Burs - 1196 Adhesive Resin Cement (Dual Lock Composite Resin Cement), 4.5 Gm Isi/Iso/Ce Marked Cement 4.5 Gm 1197 Etchant 37% Phosphoric Acid ( 9 Ml Syringe) Solution 1198 Root Canal Spreader 15-40, 21 Mm Isi/Iso/Ce Marked 1199 Root Canal Spreader 15-40, 25 Mm Isi/Iso/Ce Marked 1200 Gutta Percha Point No. 20, Isi/Iso/Ce Marked 1201 Gutta Percha Point No. 25, Isi/Iso/Ce Marked 1202 Gutta Percha Point No. 30, Isi/Iso/Ce Marked 1203 Gutta Percha Point No. 15-40, Isi/Iso/Ce Marked 1204 Gutta Percha Point No. 45-80, Isi/Iso/Ce Marked 1205 Absorbent Point No.15-40, Isi/Iso/Ce Marked Packet Of 200 1206 Absorbent Point No.45-80, Isi/Iso/Ce Marked Packet Of 200 1207 Stainless Steel Wire 26G. Soft Isi/Iso/Ce Marked 1208 Gates Glidden Drill No.1 1209 Gates Glidden Drill No.2 1210 Gates Glidden Drill No.3 1211 Pillow Cover Cotton Size:48 X 70 Cm, Color - Violet 1212 Pillow Cover Cotton Size:48 X 70 Cm, Color - Indigo 1213 Pillow Cover Cotton Size:48 X 70 Cm, Color - Blue 1214 Pillow Cover Cotton Size:48 X 70 Cm, Color - Green 1215 Pillow Cover Cotton Size:48 X 70 Cm, Color - Yellow 1216 Pillow Cover Cotton Size:48 X 70 Cm, Color - Orange 1217 Pillow Cover Cotton Size:48 X 70 Cm, Color - Peach 1218 Bed Sheet Size-150 X 240 Cm, Color:Violet 1219 Bed Sheet Size-150 X 240 Cm, Color:Indigo 1220 Bed Sheet Size-150 X 240 Cm, Color:Blue 1221 Bed Sheet Size-150 X 240 Cm, Color:Green 1222 Bed Sheet Size-150 X 240 Cm, Color:Yellow 1223 Bed Sheet Size-150 X 240 Cm, Color:Orange 1224 Bed Sheet Size-150 X 240 Cm, Color:Peach 1225 Ot Linen Poplin- Green Color, Size : 90 X 90 1226 Ot Linen Poplin- Green Color, Size : 90 X 140 1227 Ot Linen Poplin- Green Color, Size : 140 X 210 1228 Ot Linen Poplin- Green Color, Size : 90 X 90 (With Oval) 1229 Ot Linen Poplin- Green Color, Size : 90 X 140 (With Circular Hole Of Size 10€ Diameters In Centers Green Color) 1230 Ot Linen Poplin- Green Color, Size : 130 X 180 (With Circular Hole Of Size 10€ Diameters In Centers Green Color) 1231 Ot Linen Cotton White 88X88 Cm. With Hole Size 9 X 10 Cm. In Centre And Should Be Folded And Stitched So There Are No Loose Ends. 1232 Ot Gown Poplin Length 130 X 135 Cms Arm’S Length 58 X 60 Back Open Type With Provision Of Tying With String At Back Arm Should Have Elasting Cuff Or Cord For Tying At Cuff End. The Inside Of Gown Should Be Inter Lock So That There Are No Loose Threads 1233 Patient Dress Kurta Payjama (Striped Blue) Small. Kurta Length 70 X 80 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1234 Patient Dress Kurta Payjama (Striped Blue) Medium. Kurta Length 80 X 90 Cms Arm Length 22X 24 Cms.V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1235 Patient Dress Kurta Payjama (Striped Blue) Large. Kurta Length 100 X 105 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1236 Doctor Dress Kurta Payjama (Blue) Small. Kurta Length 70 X 80 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1237 Doctor Dress Kurta Payjama (Blue) Medium. Kurta Length 80 X 90 Cms Arm Length 22X 24 Cms.V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1238 Doctor Dress Kurta Payjama (Blue) Large. Kurta Length 100 X 105 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1239 Towel 56 X 115 Cms. White Color 1240 Dental Sheet Green Cotton 45 X 45 Cms. 1241 Aprons (Lab Coats ) (Small) Full Size, Full Sleeves 1242 Aprons (Lab Coats) (Medium) Full Size, Full Sleeves 1243 Aprons (Lab Coats) (Large) Full Size, Full Sleeves 1244 Legging Each Leg Poplin 40 X 40 Cms. Green Color Bottom Closed 1245 Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color 1246 Kurta, Petticoat Sets Large Size , Green Strip 1247 Glass Lonomer Silver Reinforced Isi/Iso/Ce Marked 1248 Glass Lonomer Luting Cement Isi/Iso/Ce Marked 1249 Rubber Dam Sheet Isi/Iso/Ce Marked 1250 Sterilization Rolls For Packing Instrument 15Cm X 200Mtrs 1251 Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked 1252 6% Taper Gutta Percha Size 25 1253 6% Taper Gutta Percha Size 30 1254 6% Taper Gutta Percha Size 35 1255 6% Taper Gutta Percha Size 40 1256 4% Taper Gutta Percha Size 25 1257 Esthetic Fiber Post System 1258 Pre Fabricated Metallic Post ( Cemented) 1259 Pre Fabricate Metallic Post (Threaded) 1260 Rubber Base Impression Material Addition Silicone Putty With Compatible Light Body 600-900Ml Putty With 50 Ml Light Per 300Ml Of Putty Isi/Iso/Ce Marked 1261 Retraction Cord (Assorted Size Isi/Iso/Ce Marked 1262 Bone Graft Material For Dental Purpose Isi/Iso/Ce/Marked 1263 Surgical Bur Straight Fissure Carbide 1 Mm Isi/Iso/Ce/Marked 1264 Surgical Bur Straight Fissure Carbide 1.5 Mm Isi/Iso/Ce/Marked 1265 Surgical Bur Straight Fissure Carbide 2 Mm Isi/Iso/Ce/Marked 1266 Resin Cement Isi/Iso/Ce Marked 1267 Preadjusted Edgewise Stainless Steel Brackets Kit Containing Upper & Lower 2Nd Premolar To 2Nd Premolar Bondable Brackets With Upper Triple And Lower Double Weldable Buccaltubes,With Roth And Mbt Prescription And 0.022€And 0.018€ Slot (Leone/American Orth 1268 Ni Ti Preformed Orthodontic Wire Round - 014 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1269 Ni Ti Preformed Orthodontic Wire Round - 016 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1270 Ni Ti Preformed Orthodontic Wire Round - 018 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1271 Ni Ti Preformed Orthodontic Wire Round - 020 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1272 Ni Ti Preformed Orthodontic Wire Rectangular -016X022 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1273 Ni Ti Preformed Orthodontic Wire Rectangular -017X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1274 Ni Ti Preformed Orthodontic Wire Rectangular -019X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1275 Stainless Steel Preformed Orthodontic Wire Round 014 Inch (Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1276 Stainless Steel Preformed Orthodontic Wire Round 016 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1277 Stainless Steel Preformed Orthodontic Wire Round 018 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1278 Stainless Steel Preformed Orthodontic Wire Round 020 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1279 Stainless Steel Preformed Orthodontic Wire Rectangular 016X022 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1280 Stainless Steel Preformed Orthodontic Wire Rectangular 017X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1281 Stainless Steel Preformed Orthodontic Wire Rectangular 019X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1282 Blue Elastic Separators ( Leone/ American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1283 Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Short Types Isi/Iso/Ce Marked 1284 Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Long Types Isi/Iso/Ce Marked 1285 Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Continous Types Isi/Iso/Ce Marked 1286 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Yellow Isi/Iso/Ce Marked 1287 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Blue Isi/Iso/Ce Marked 1288 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Green Isi/Iso/Ce Marked 1289 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Red Isi/Iso/Ce Marked 1290 Colourless O Rings (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1291 Expansion Screw 3 Pin (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1292 Preformed Molar Bands Without Buccal Tubesisi/Iso/Ce Marked 1293 Bioplast Sheets Proprietary Item 2 Mm Thickness Isi/Iso/Ce Marked 1294 Bioplast Sheets Proprietary Item 3 Mm Thickness Isi/Iso/Ce Marked 1295 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 19 Gauge Isi/Iso/Ce Marked 1296 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 20 Gauge Isi/Iso/Ce Marked 1297 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 21 Gauge Isi/Iso/Ce Marked 1298 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 23 Gauge Isi/Iso/Ce Marked 1299 Tma Wire Lengths Rectangular - 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1300 Tma Wire Lengths Rectangular - 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1301 Tma Wires Preformed Rectangular- 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1302 Tma Wires Preformed Rectangular- 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1303 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 6Mm Isi/Iso/Ce Marked 1304 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 7Mm Isi/Iso/Ce Marked 1305 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 8Mm Isi/Iso/Ce Marked 1306 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 10 Mm Isi/Iso/Ce Marked 1307 Forsus Fatigue Resistant Device( 3 M Unitek ), Proprietary Itemisi/Iso/Ce Marked 1308 Powerscope 2 (American Orthodontics Proprietary Item)Isi/Iso/Ce Marked 1309 Etchant 37% Phosphate Acid In Gel Form 2-4 Gm, Isi/Iso/Ce Marked 1310 Loose Preadjusted Edgewise Mbt Bracket 022 Slot Isi/Iso/Ce Marked Per Bracket 1311 Bondable Buccal Tubes Upper And Lower Right And Left 1St Molars .022€ Mbt With Upper Triple And Lower Double Slot (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1312 Bondable Buccal Tubes Upper And Lower Right And Left 2Nd Molars .022€ Mbt (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1313 Ni-Ti Open Coil Spring0 10€X 030 (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marke 1314 Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 9Mm Isi/Iso/Ce Marked 1315 Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 12Mm Isi/Iso/Ce Marked 1316 Eugenol 110 Ml Isi/Iso/Ce Marked 1317 Zinc Oxide Powder 110 Gram Isi/Iso/Ce Marked 1318 Naoci 5.25% Solution Isi/Iso/Ce Marked 1319 Fiber-Reinforced Splinting Material- Bondable Reinforced Ribbon Fiber-Approx. 2Mm Width Isi/Iso/Ce Marked 1320 Fixer & Developer Solution Set (Manual) To Make 13.5 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked 1321 Air Rotor Spray Isi/Iso/Ce Marked Bottle 1322 Disposable Patient Drape Sheets Size 1X1 Mtrs. 1323 Single Use Syringes 10 Ml With Needle 23 G. X 1€ Length Sterile Isi/Iso/Ce Marked 1324 Single Use Syringes 5 Ml With Needle 23 G. Sterile 1€ Length Isi/Iso/Ce Marked 1325 Single Use Syringes 2 Ml With Needle 23 G. Sterile 1€ Length Isi/Iso/Ce Marked 1326 Single Use Insulin Syringes With Needle Sterile Isi/Iso/Ce Marked 1327 B.P. Blade Size 11 Isi/Iso/Ce Marked 1328 B.P. Blade Size 15 Isi/Iso/Ce Marked 1329 B.P. Blade Size 23 Isi/Iso/Ce Marked 1330 Silk Suture Material (3-0) 1331 N-95 Respirator Mask(Covid) 1332 Ppe Kit(Covid) 1333 Vtm Media(Covid) 1334 Triple Layer Mask(Covid) 1335 Hydroxy Chloroquine Tablet 200 Mg(Covid) 1336 Lysol(5L)(Covid) 1337 Sodium Hypochlorite(5L)(Covid) 1338 Oxygen Cylinder(Covid) 1339 Real Time Pcr Kit(Covid) 1340 Covid19 Igm/Igm Rapid Test (Wondfo Sars-Cov-2 Antibody Test)(Covid) 1341 Dead Body Cover(Covid) 1342 Rapid Screening Kits For Covid-19 Test(Covid) 1343 Denture Spirit-Surgical Spirit With Methyl Salicylate, Diethyl Phthalate And Caster Oil Dentured Alchol, 500 Ml Bottle(Covid) 1344 Disposable Bed Sheet(Covid) 1345 Thermal Scanner(Covid) 1346 Tab Levocetrizine 5 Mg(Covid) 1347 Spun Bond Non-Woven 3 Ply Face Covers(Covid) 1348 Magna Pure 24 Total Na Isolation Kit, Pack Size-96(Covid) 1349 Magna Pure 24 Processing Cartridge, Pack Size-48(Covid) 1350 Magna Pure 24 Tip Ptark (Comes With Pierecing Tools)Pack Size-48(Covid) 1351 Magna Pure Tip 1000 Ul, Pack Size-3840(Covid) 1352 Framestrips With Flat Caps High Profile, Pack Size-120(Covid) 1353 Magna Pure Sealing Foil,Pack Size-100(Covid) 1354 Mplct Na Isolation Kit- Lysis/ Binding Buffer Refill, Pack Size-100Ml(Covid) 1355 Handsanitizer (500 Ml)(Covid) 1356 Framestrip With Flat Caps-Low Profile(Covid) 1357 Magna Pure 96 External Lysis Buffer(Covid) 1358 Light Cycler -480 Multiwell 11 Plate 96(Covid) 1359 Light Cycler 8-Tube Strip Adapter Plate(Covid) 1360 Manual Rna Extraction Kit-50 Test(Covid) 1361 Oseltamivir 75 Mg 1362 Covid Kavachâ„¢ Anti- Sars Cov-2 Igg Antibody Detection Elisa (96 Micro Well Coated Plate 1363 Tocilizumab Injection 400 Mg/20 Ml(Covid) 1364 Standard Q Covid19,Ag Test(Rapid Antigon Test) 1365 Lc Prep Lysi/Bind Buff Dna,Mbp 1366 Ramdesivir Injection 100Mg 1367 Hydroxychlorine Tablet 400 Mg(Covid) 400 Mg 1368 Dexamethasone 6 Mg Tablet(Covid) 6 Mg 1369 Enoxaparin 40 Mg Injection(Covid) 40 Mg 1370 Favipiravir(Covid) 400 Mg 1371 Coronil Kit Coronil Kit Each Contains(80Tab+80Tab+20Ml) 1372 Ayush Kwath Powder 1373 Amphotericin B Powder For Injection 50 Mg Liposomal Complex,Vial Injection Powder 50Mg/Ml, 10Ml Vial 1374 Tocilizumab 80 Mg 1375 Oxygen Regulator With Humidifier Bottle,Rotameter And Key For B And D Type Cylinders 1376 Disposable Ad Syringes 0.5Ml. 1377 Nitrile Gloves(Large Size),Purple,Powder Free,Box Of 100 Pcs 1378 Nitrile Gloves(Medium Size),Purple,Powder Free,Box Of 100 Pcs 1379 Nitrile Gloves(Small Size),Purple,Powder Free,Box Of 100 Pcs 1380 Tablet Posaconazole 100 Mg 1381 Intravenous Immunoglobulin(Ivig) 10 Gm,100 Ml Bottle 1382 Sars-Cov-2 Sequencing Kits Test Kit Kit 1383 Corbevax Vaccine,10 Ml Vial 1384 Zinc Oxide Cream 10% 10 Gm 1385 Zinc Oxide Powder 100 Gm 1386 Zinc Phosphate Cement , Powder And Liquid 1387 Zinc Sulphate Dispersible Tablet 20 Mg 1388 Zinc Sulphate Syrup 60 Ml 1389 Zoledronic Acid Injection 4 Mg 1390 Balloon Tamponade (Standard Size) 1391 Miracle Mix(Standard Size) 1392 Bonding Agent 1393 Endo Files(Standard Size) 1394 Orafill(Standard Size) 1395 Pain Off(Standard Size) 1396 Composite Syringes A1(Standard Size) 1397 Composite Syringes B1(Standard Size) 1398 Lignocaine Spray 1399 Dycal(Standard Size) 1400 Metapex(Standard Size) 1401 Restoration Bonding Agent 1402 Mixing Pad(Standard Size) 1403 Coe-Pack(Standard Size) 1404 Temephos 50% 1 Ltr 1405 Pyrazinamide 500 Mg Tablet 1406 Pyrazinamide 750Mg Tablet 1407 Rifampicin 150 Mg Capsule 1408 Rifampicin 300 Mg Capsule 1409 Rifampicin 450 Mg Capsule 1410 Isoniazid 300 Mg Tab. 1411 Isoniazid 100 Mg Tab. 1412 Ethanbutol 800 Mg Tab. 1413 Ethanbutonl 400 Mg. Tab. 1414 Ethanbutol 100 Mg Tab. 1415 4 Fdc (A) 1416 3 Fdc (A) 1417 Inj. Streptomycetin 0.75 Gm 1418 3 Fdc Ped. (P) 1419 2 Fdc Ped. (P) 1420 Pas Poder 1421 Iec Jel Pack 1422 Tharmocal Box 1423 Falcon Tube 50 Ml 1424 Tab. Pyridoxin 50 Mg 1425 Inj. Kanamicine 18 M 1426 Tab. Cyclocerin 500 Mg 1427 Tab. Cyclocerin 250 Mg 1428 Tab. Ethonamlde 250 Mg 1429 Tab. Uvezolld 1430 Tab. Clofazimine 100 Mg 1431 Tab. Coprpcomycine 1 Mg 1432 Tab. Delamanid 50 Mg 1433 Tab. Moxifloxacin 400 Mg 1434 Multi Drug Urine Screen Kits 1435 Cotton Bandages(1 X 12 Rolls) 10 Cm X 4 Mtrs 1436 Cotton Bandages(1 X 12 Rolls) 15 Cm X 5 Mtrs 1437 Cotton Bandages(1 X 12 Rolls) 5 Cm X 4 Mtrs 1438 Cotton Gauze Cloth(1 X 5 Than) 90 Cm X 18 Mtrs 1439 Cotton Wool Ip 100 Gm 1440 Cotton Wool Ip 500 Gm (Net) 1441 Cotton Wool Ip 500 Gm 1442 Disposable Cap 1443 Disposable Surgical Gloves No. 6.5, Isi Mark 1444 Disposable Surgical Gloves No. 7, Isi Mark 1445 Disposable Surgical Gloves No. 7.5, Isi Mark 1446 Disposable Surgical Gloves No.6 , Isi Mark 1447 Disposable Syringe 20 Ml With Needle, Ribbon Pack 1448 Disposable Syringe 50 Cc With Needle, Ribbon Pack 1449 Disposable Syringes 1 Ml (23G), Ribbon Pack 1450 Disposable Syringes 10 Ml. With Needle, Ribbon Pack 1451 Disposable Syringes 2 Ml, (23G), Ribbon Pack 1452 Disposable Syringes 2 Ml, (24G), Ribbon Pack 1453 Disposable Syringes 5 Ml, (23G), Ribbon Pack, Reuse Preventable 1454 Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 6.5 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) 1455 Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 7 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) 1456 Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 7.5 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) 1457 Disposable Shoe Cover 1458 Disposable Insulin Syringe (31G), Ribbon Pack 1459 Disposable Mask 1460 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle 1461 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle 1462 Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle 1463 Suture Catgut 3-0No. R.B. Needle 1464 Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle 1465 Suture Silk 2-0No. R.B. Needle 1466 Polyglactin (Plain) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1467 Polyglactin (Plain) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1468 Polyglactin (Plain) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1469 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body (12 Foils In Each Box) 1470 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle (12 Foils In Each Box) 1471 Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1472 Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) 1473 Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied (12 Foils In Each Box) 1474 Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1475 Stadiometer 1476 Wooden Stick (Oral Examination) 1477 Bp Appratus 1478 Weighing Machine (Digital) 1479 Acetic Acid 100% 1480 Swab Sticks For Vig Examanation 1481 Torch 1482 Mouth Mirror 1483 Disttled Water 1484 Wooden Tongue Depressor 1485 Mantoux Test 1486 Albumin (5X50Ml) 1487 Alkline Phosphtase 4X24 + 4X6Ml) 1488 Bilirubin Kit 4X60Ml) 1489 Cholestrol Kit 5X30Ml) 1490 Creatinine Kit (4X60M)L 1491 Ggt (5X6.5Ml) 1492 Glucose Kit (5X60Ml) 1493 Hdl Kit (4X30Ml + 4X10Ml) 1494 High Control For Semi Auto (1X5Ml) 1495 Normal Control For Semi Auto (1X5Ml) 1496 Sgot Kit (4X24Ml + 4X6Ml) 1497 Sgpt Kit (4X24Ml + 4X6Ml) 1498 Total Protein (5X50Ml) 1499 Triglycerides Kit (4X24Ml + 4X6Ml) 1500 Urea Kit (4X24Ml + 4X6Ml) 1501 Uric Acid Kit (4X24Ml + 4X6Ml) 1502 Wash Kit (4X50Ml) 1503 Reagent For Fully Automatic Bio-Chemistry Analyser Bs400 Which Must Be In Liquid State Stable Form 1504 Alkaline Phosphate 8X50 / 8X12.5Ml 1505 Amylase 4 X 20 Ml/ 2 X 10 Ml 1506 Bilirubin Total 8X50 / 8X12.5Ml 1507 Bilirubin Direct 8X50 / 8X12.5Ml 1508 Cholestrol 8X50Ml 1509 Crp Fs 1X20 / 1X10Ml 1510 Ck - Nack 4 X 20 Ml/ 2 X 10 Ml 1511 Cpk - Mb 4 X 20 Ml/ 2 X 10 Ml 1512 Creatinine 8X50 / 8X12.5Ml 1513 D-Dimer 2X12Ml + 1X8Ml 1514 Ferritin 2X20 / 1X10Ml 1515 Glucose 8X50/8X12.5Ml 1516 Hdl 4X20 / 2X10Ml 1517 Hba1C 2X15 / 1X10 / 1X5Ml 1518 Hba1C 3X20/ 2X10 / 1X10Ml 1519 Hemolyzing Solution 500 Ml 1520 Iron Tibc 4X20 / 2X10 1521 Ldh 8X50Ml + 8X12.5Ml 1522 Ldl 4X20 / 2X10Ml 1523 Lipase 4X20 / 2X10Ml 1524 Ra Factor 2X20 / 1X8Ml 1525 Acetec Acid 5% 1526 Tablet Chlorine 1527 Capillary Tubes 1528 Card For Haemo Spot 1529 Centrifuge Tube Stand 15 Ml(10*2) 1530 Centrifuge Tube Stand 50 Ml(15*2) 1531 Conical Flask 500 Ml 1532 Coplin Jars 1533 Covid Elisa Antigen Kit (Icmr Approved) 1534 Crp 50 Test Kit (Qualitative) 1535 Cryo Box With Lid 1536 Cryo Vials 2 Ml 1537 Cup For Bs400 Chemistry Analyzer 1538 Diamond Marking Pencils 1539 Disposable 3 Ply Mask 1540 Disposable Alcohol Swab 1541 Disposable Cap 1542 Disposable Esr Pipette 1543 Disposable Esr Tube (Westergen Method) 1544 Disposable Gown 1545 Disposable Shoe Cover 1546 Distilled Double Dionized Water 5 Ltr 1547 Distilled Triple Dionized Water 5 Ltr 1548 Distilled Dionized Water 5 Ltr 1549 Drums Tube 1550 Ecg Jelly/Usg Jelly 1551 Edta Vial (Non Vacuum) 1552 Edta Vial (Vacuum) 1553 Eppen Drop Vial ( Mct ) 1554 Esr Black Vial (Non Vacuum) 1555 Esr Black Vial (Vacuum) 1556 Esr Stand 1557 Face Shield 1558 Falcon Tube Rack 1559 Falcon Tube (All Size) 1560 Filter Paper 1561 Filter Tip 100 Micro Litre (1*960) 1562 Filter Tip 20 Micro Litre (1*960) 1563 Filter Tip 10 Micro Litre (1*960) 1564 Filter Tip 200 Micro Litre (1*960) 1565 Filter Tip 5 Micro Litre (1*960) 1566 Floride Vial (Non Vacuum) 1567 Floride Vial (Vacuum) 1568 Gel Iec Pack 1569 Glass Bottel Round 1570 Glass Cover Slip 22 Mm 1571 Glass Pipette 10Ml 1572 Glass Pipette 2Ml 1573 Glass Pipette 5Ml 1574 Glass Slide 1575 Glucostix 50 Sticks 1576 Hand Sanitizer 5 Ltr (Ip Base) 1577 Hb Pipette 1578 Hb Tube 1579 Hbsag Card 1580 Hcv Rapid Card 1581 Hiv Rapid Card 1582 Insulated Sample Transportation Box 1583 Lancet (Auto Destroyable/Safety Lancet) 1584 Lancet (Twisted Round) 1585 Leucoreduction Filter 1586 Malaria Antigen Card 1587 Mct Vials 1.5Ml 1588 Mct Vials 2.0Ml 1589 Measuring Cylender 20Ml 1590 Measuring Cylender 100Ml 1591 Measuring Cylender 500Ml 1592 Measuring Cylender 1000Ml 1593 Microscope Cover Glass 22 X 40 Mm 1594 Multistix 1595 N/10 Hcl 500Ml 1596 Parafilm Tape 1597 Pastuer Pipette 1598 Ph Paper 5.0 To 7.5 1599 Plain Vial (Non Vacuum) 1600 Plain Vial (Vacuum) 1601 Ppe Kit (Citra & Drda Approved) 1602 Pregnancy Cards 1603 Ra Factor 50 Test Kits 1604 Reversible Rack Mct 1605 Rubber Teat For Pipette 1606 Slide Storage Rack 1607 Slide Storage Tray Pvc 1608 Sodium Citrate Vials Non Vaccum 1609 Sodium Citrate Vials Vaccum 1610 Sodium Hypochloride 5 % 5 Ltr 1611 Sst Vials Non Vaccum 1612 Sst Vials Vaccum 1613 Steel Rack For Test Tube 48 Hole 1614 Sterile Swab Stick 1615 Sterlum 500Ml 1616 Stickers For Slide (Per Piece) 1617 Test Tube Glass 12*100 1618 Test Tube Glass 12*75 1619 Test Tube Glass 15*150 1620 Test Tube Glass 25*150 1621 Test Tube Stand 1X 10 Slots 1622 Test Tube 1X 30 Slots 1623 Thermocol Box 1624 Thermal Paper Roll 1625 Tissue Paper Roll 20 Meter 1626 Tourniquate 1627 Sample Cup With Label (3 Screw, Sterile)/ Sputum Cup 1628 Uristix 100 Strips 1629 Vaccutainer 1630 Vaccutainer Needle 1631 Vtm Swab Stick (Standard Size) 1632 Washing Brush . For Test Tube (Standard Size) 1633 Widal Kit (Slide Method) 1634 Wipes 1*280 Pc Lab Grade 1635 Yellow Tips 1X1000 Nos 1636 Zip Lock Pouch For 1 Ltr 1637 Anti-D Igg 10 Ml 1638 Anti-D Igm 10 Ml 1639 Copper Sulphate Powder 500Gm 1640 Dpx Mount 1641 Ethanol Absolute 1642 Fouchet Reagent 1643 Giemsa Stain 125 Ml 1644 Glacial Acetic Acid 1645 H & E Stain (Haematoxillin Stain) 1646 J.S.B 1 Stain 1647 J.S.B 2 Stain 1648 Lieshmen Powder 25 Gm 1649 Lugal Iodine 125 Ml 1650 Manual Rna Extraction Kit 50 Test (Icmr Approved) 1651 Mathenol 2.5 Ltrs 1652 Naoh Sodium Hydroxide 1653 Oil Immersion 25Ml 1654 Rapid Pap Stain Kit 1655 Rapid Test Kit Igg, Igm, Ns1 For Dengue 1656 Rtpcr Kits 96 Test For Covid-19 (Icmr Approved) 1657 Siprit 1658 Sodium Chloride 1659 Sodium Dehydrogen Orthophosphate 1660 Sodium Hydrogen Orthophosphate 1661 Sodium Hypochloride 10% 1662 Sulphar Powder 500 Gm 1663 T3 Elisa (96 Test) 1664 T4 Elisa (96 Test) 1665 Tsh Elisa (96 Test) 1666 Xylene 1667 Anti Ab 1668 Anti D ( Igg+ Igm) 1669 Anti Human Sera/ Coombs Sera 1670 Blood Grouping Plate 1671 Bovine Albumin 1672 Single Blood Bag 350 Ml 1673 Triple Blood Bag 450 Ml 1674 Double Blood Bag 350 Ml(Sagm) 1675 Double Blood Bag 350 Ml 1676 H.I.V Elisa 4Th Generation (96 Test) 1677 Hb Strips 1678 Hbsag Elisa 4Th Generation (96 Test) 1679 Hcv Elisa 4Th Generation (96 Test) 1680 Quadraple Blood Bags 450Ml 1681 Single Blood Bag 350Ml 1682 Vdrl Card 1683 Absolute Alcohol 95% (500 Ml) 1684 Acetone (500Ml) 1685 Hiv Tridot Rapid Cards 1686 Biological Indicator 1687 Bunsen Burner 1688 C.L.E.D Agar 500Gm 1689 Carbol Fuchsin Powder (25 Gm) 1690 Carbol Fuchsin (125 Ml) 1691 Carbolic Acid 500Ml 1692 Chemical Indicator 1693 Concave Slide 1694 Conical Flask 500Ml 1695 Crystal Violet (125 Ml) 1696 Cyto Brush With Spatula (100 Piece) 1697 Glucose Broath 1698 Gram Iodine Solution (125 Ml) 1699 Haematoxylene Stain 1700 Hydrogen Peroxide 3% (500Ml) 1701 Indicator Tape For Steam Autoclave Process Verification 1702 KovacS Indole Reagent (100 Ml) 1703 Lactose Monohydrate (500 Gm) 1704 Leucoreduction Filter 1705 Liquid Broath 1706 Mac Conkey Agar 500Gm 1707 Mac Conkey Broth Double Strength 500Gm 1708 Methylene Blue 25 Gram (Powder) 1709 Motility Test Medium 1710 Mr Vp Medium 500Gm 1711 Muller Hinton Agar 500Gm 1712 Ph Strips 1713 Sulphuric Acid 98.9% (500 Ml) 1714 Xld Agar 500 Gm) 1715 Xylose Lysine (100 Gm) 1716 Young Broath Culture 1717 Alp Kit 1718 Aso Kit 1719 Capillary Tubes For Ct(Pkts) 1720 Cover Slip(Pkt.) Large(Pkts.) 1721 Cover Slip Small (Pkts.) 1722 Crp Kit 1723 Diamond Pencil 1724 Edta Vacutainer 1725 Esr Tube 1726 Filter Paper For Bt(Pkts) 1727 Formalin (Ltrs.) 1728 Glass Slide 1729 Glucostrips 1730 GramS Stain 1731 Hemoglobin Strips/Hemoque 1732 Ketac-Molar 1733 LeishmanS Stain 1734 Lens Cleaner 1735 Levolin Respules 1736 LugolS Iodine 1737 Mgg Giemsa Stain 1738 Pap Smear Spectulla & Cyto Brush 1739 Ph Strips(Pkts.) 1740 Plain Vacutainer 1741 Plastic Container For Urine 1742 Pm Kits 1743 Ra Kit 1744 Rapid Pep Stain Kit 1745 S.Albumin Kit 1746 S.Calcium Kit 1747 S.Protein 1748 Semen Diluting Fluid (Bottles) 1749 Sugar Kit 1750 Suture (10.0) F 3719 Nylon 1751 Toluidene Blue(500Ml.) 1752 Torniquet 1753 Tsh Card 1754 Widal Kit 1755 Zn Stain Kit 1756 Micro Tips Large 1757 Orthotoluedine Solution 1758 Uristic 1759 Lq080 10 Ml Cooked M Medium (10 Ml X 25) 1760 Sterile Individual Packed Cotton Swabs 1761 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-10Ul 1762 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-20Ul 1763 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-200Ul 1764 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 100-1000Ul 1765 Skirted Pcr Plate (96 Wells) 1766 Sterile Transparent Sealant For Pcr Plate (96 Well) 1767 Pcr Kits For Covid 19 Testing Compatible With Biorad Pcr 1768 Mac Conkey Both Purple Single Strength W/ Bcp Media M 083 1769 Mac Conkey Both Purple Double Strength W/ Bcp Media M/96 1770 Elisa Ns1 Dengue Kit (96 Test) 1771 Auromine - O (Per Gm) Powder 1772 Broom Stick Stirrer(Pkt 100) 1773 Heparin Lithimum Tube 1774 Pernament Marker Pen Black 1775 Methanol 5Ltr 1776 Zip Lock Bag 20X25 Cm 1777 Hydrochloric Acid (Mw36.46 ) 1778 Slide Box (100 Slide Per Box) 1779 Biohazard Symbol (Red) 1780 Phenol Cristal 1781 Cello Tape (5 Cm) 1782 Potossium Permagnent (Kmno4) Cristal 50 Gm 1783 Spirit Lamp 1784 Spirit Alochloic 1785 Squize Bottle (Small) 1786 Squize Bottle (Big) 1787 Ruber Band 1788 Temp. Humidity Meter 1789 Weighinj Scale Degital 1790 Perafilm 1791 Brosile Zar 5 Ltr 1792 Brosile Zar 3 Ltr 1793 Brosile Zar 500 Ml 1794 Mac Conkey Broth Purple Single Strength W/ Bcp (Hi Media M083 1(500Gm.) 1795 Mac Conkey Broth Purple Double Strength W/Bcp (Hi Media M 796 1(500 Gm.) 1796 Ria- Tubes 1797 Plastic Tube With Cap 2 Ml 1798 Plastic Tube For Calcium Test 1799 Bp Apparatus Digital 1800 Bp Apparatus Marcury 1801 Weighinj Scale For Blood Unit 1802 Stethoscope 1803 Dengue Ns1 Rapid Test Card 1804 Dengue Igm+Igg Combo Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
18.
Housing Urban and Rular Development #11144599 Technical Bid
Tender For Tourism Development And Beautification Of Paataleshwar Mandir At Gram Sabha Kalpi Dist- Jalaun- 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. Dsr 2.6.1 Dsr 2.6.1 2 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) Dsr 4.1.8 3 Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: Dsr 2.35.3.1 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. Dsr 2.25(A) 5 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr 2.27 6 Boring With Hydraulic Piling Rigs With Power Units, Providing And Installing Cast In Situ Single Under Reamed Piles Of Specified Diameter And Length Below Pile Cap In M-25 Cement Concrete, To Carry A Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Boring With Bentonite Solution And The Length Of The Pile To Be Embedded In Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured Upto To The Bottom Of Pile Cap) : 300 Mm Dia Piles Dsr 20.3.1 7 Vertical Load Testing Of Piles In Accordance With Is 2911 (Part Iv) Including Installation Of Loading Platform By Kentledge Method And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification & The Direction Of Engineer In-Charge. 1.Initial Test Dsr 20.6.1 8 Vertical Load Testing Of Piles In Accordance With Is 2911 (Part Iv) Including Installation Of Loading Platform By Kentledge Method And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification & The Direction Of Engineer In-Charge. 2.Routine Test Dsr 20.6.1.2 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 5.1.2 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size) Dsr 5.1.2 10 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. Dsr 5.9.1 11 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 5.2.2 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size) Dsr 5.2.2 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. Dsr 5.9.6 13 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). Dsr 5.3 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr 5.9.5 15 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr 5.9.3 16 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. Dsr 5.22.6 17 Brick Work With Bricks Of Class Designation 15 (Class-150) In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand (Fm 1.50 To 2.00)) Dsr Ar 18 Brick Work With Bricks Of Class Designation 15 (Class-150) In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand (Fm 1.50 To 2.00)) Dsr Ar 19 Half Brick Masonry With Bricks Of Class Designation 15 (Class-150) In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement : 4 Coarse Sand (Fm 1.50 To 2.00)) Dsr Ar 20 12 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6(1 Cement: 6 Coarse Sand) Dsr 13.4.2 21 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6(1 Cement: 6 Coarse Sand) Dsr 13.5.2 22 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding Tor.C.C. Projections. Dsr 5.30 23 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colors, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr 11.37A 24 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming Tois: 15622 (Thickness To Be Specified By The Manufacturer), Of Approvedmake, In All Colours, Shades Except Burgundy, Bottle Green, Black Ofany Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Stepsand Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm,Including Pointing In White Cement Mixed With Pigment Of Matching Shadecomplete. Dsr 8.31 25 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Bespecified By The Manufacturer) With Water Absorption Less Than 0.08%And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades,Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting Thejoints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr 11.41A.3.1 26 Providing And Laying Polished Granite Stone Flooring In Required Designand Patterns, In Linear As Well As Curvilinear Portions Of The Building Allcomplete As Per The Architectural Drawings With 18 Mm Thick Stone Slabover 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With Whitecement Slurry Admixed With Pigment Of Matching Shade Includingrubbing, Curing And Polishing Etc. All Complete As Specified And Asdirected By The Engineer-In-Charge. Polished Granite Stone Slab Of Colour Black, Cherry/Rubyred Or Equivalent Dsr 11.56.1 27 Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Inline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For : (I) Sites With Basic Wind Speed > 45 M/Sec As Per Is 875 – Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speeds. Three Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (98Mm & Above) X (40Mm & Above) & Both Glazed And Fly Screen Sash (30Mm & Above) X (55Mm & Above) With Zinc Alloy (Zamak) Powder Coated Handle On Every Glazed Panel Along With Multi-Point Locking System. (Height Upto 1.2M). Dsr 9.147.A4.1 28 Three Track Three Panels Sliding Door With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Zinc Alloy (Zamak) Powder Coated Handle On Two Panels Along With Multi-Point Locking System, Adjustable Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (98 Mm & Above) X (40 Mm & Above) & Both Glazed And Fly Screen Sash (30 Mm & Above) X (74 Mm & Above). (Height Upto 2.5 Metre). Dsr 9.147.B3.1 29 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) Dsr 21.3.2 30 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete, Complying To Astm C920, Din 18540- F & Iso 11600. Upto 5Mm Depth And 5 Mm Width Dsr 21.19.1 31 Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete. With 12 Mm Mild Steel U Beading Dsr 9.51.2 32 Distempering With Oil Bound Washable Distemper Of Approved Brandand Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr 13.41.1 33 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqmover And Including Priming Coat Of Exterior Primer Applied@ 2.20 Kg/10 Sqm) Dsr 13.46.1 34 Providing And Applying White Cement Based Putty Of Average Thickness1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wallsurface To Prepare The Surface Even And Smooth Complete. Dsr 13.80 35 Providing And Laying Integral Cement Based Water Proofing Treatmentincluding Preparation Of Surface As Required For Treatment Of Roofs,Balconies, Terraces Etc Consisting Of Following Operations: Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Ofcement Admixed With Water Proofing Compound Conformingto Is. 2645 And Approved By Engineer-In-Charge Over The Rccslab Including Adjoining Walls Upto 300 Mm Height Includingcleaning The Surface Before Treatment.(B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm. With Average Thickness Of 120Mm & Minium Thickness At Khurra As 65 Mm Dsr 22.7.1 36 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1 M X1 M X 400Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarsesand) And A Coat Of Neat Cement, Rounding The Edges And Makingand Finishing The Outlet Complete.M Dsr 12.22 37 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10 Mm And Down Gauge), Including Finishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design : In 75X75 Mm Deep Chase. Dar 12.21.1 38 Supplying, Fabricating, Transporting, Hoistingand Fixing In Position Good Quality Of 70 Mm Redsandstone In Various Elements For All Levels.Stone Shall Be Free From Cracks, Lines Stains Andeven In Shade For Each Element. The Stone Shall|Be Fine Grained And Reddish Or Buff-Colored(Locally Available). The Work Shall Be Carried Outas Per Attached Drawings With Different Process|Of I.E Carving (Manual/ By Machine), Ornamentalwork, Traditional Work, Figure Work (Any Type,Any Size), Cnc Cutting, Moulding. The Carvingand Molding Work Shall Be Of Very Good Quality.|The Stones To Be Fixed In Line, Level And Plumb Inall Respect With The Use Of Brass Clamps, Pins, (To|Be Paid Separetely) Dowels, Cement Slurry With|Matching Pigment And Epoxy Of Akemigermany, Ardex Endura, Myk Laticrete Orjapproved Make As Required And As Approved Bythe Architects. Dsr Ar 39 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests Dsr 17.1.1 40 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 17.2.1 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid Dsr 17.2.1 41 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap Dsr 17.7.4 42 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete 32 Mm Dia C Dsr-17.28.1.1 43 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138 Mm, Breadth 102 Mm, Height Of 75 Mm With Concealed Fitting Arrangements. Weighing Not Less Than 106 Gms. Dsr 18.65 44 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. Dsr 17.31 45 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In -Charge. Dsr 17.16A 46 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. External Work. 100 Mm Nominal Inner Dia Pipes Dsr 18.9.9 47 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. External Work. 80 Mm Nominal Inner Dia Pipes Dsr 18.9.8 48 Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron/Cast Iron (Spun) Pipe Embedded In And Including Cement Concrete Blocks 10X10X10 Cm Of 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), Including Cost Of Cutting Holes And Making Good The Walls Etc. For . 100 Mm Dia Pipes Dsr 17.37.1 49 Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron/Cast Iron (Spun) Pipe Embedded In And Including Cement Concrete Blocks 10X10X10 Cm Of 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), Including Cost Of Cutting Holes And Making Good The Walls Etc. For . 75 Mm Dia Pipes Dsr 17.37.2 50 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 110 Mm Dia Pipes Dsr 12.41.2 51 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1 M X1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement, Rounding The Edges And Making And Finishing The Outlet Complete. Dsr 12.22 52 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised Pvc Rain Water Pipes By Means Of 50X50X50 Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. 110 Mm Dsr 12.43.2 53 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 25 Mm Nominal Outer Dia Pipes Dsr 18.7.3 54 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 32 Mm Nominal Outer Dia Pipes Dsr 18.7.4 55 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 40 Mm Nominal Outer Dia Pipes Dsr 18.7.5 56 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 18.8.1 15 Mm Nominal Outer Dia Pipes Dsr 18.8.1 57 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes Dsr 18.8.2 58 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions 15 Mm Nominal Bore Dsr 18.21.2.1 59 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 : 18.49.1 15 Mm Nominal Bore Dsr 18.49.1 60 Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. 15 Mm Nominal Bore Dsr 18.50.1 61 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 18.53.1 15Mm Nominal Bore Dsr 18.53.1 62 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) : 25 Mm Nominal Bore Dsr 18.17.1 63 Providing And Fixing Brass Stop Cock Of Approved Quality : 15 Mm Nominal Bore Dsr 18.16.1 64 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. Dsr 18.48 65 Excavating Trenches By Mechinical / Manual Means Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, For All Depth, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : All Kinds Of Soil,Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia Dsr 2.10.1.2 66 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 (1 Cement : 1 Fine Sand) Including Testing Of Joints Etc. Complete : 19.1.1 100 Mm Diameter Dsr 19.1.1 67 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 (1 Cement : 1 Fine Sand) Including Testing Of Joints Etc. Complete 150 Mm Diameter Dsr 19.1.2 68 Providing And Laying Cement Concrete 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design : 19.2.1 100 Mm Diameter S.W. Pipe Dsr 19.2.1 69 Providing And Laying Cement Concrete 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design :150 Mm Diameter S.W. Pipe Dsr 19.2.2 70 Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 Dsr 19.4.2.1 71 Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With R.C.C. Top Slab With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 Dsr 19.7.1.1 72 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Mdular Type Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group A Dsr 1.10.3 73 Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Alongwith 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. Dsr 1.12 74 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required. 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire. Dsr 1.14.1 75 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required. 2 X 2.5 Sq. Mm + 1X 2.5 Sq. Mm Earth Wire. Dsr 1.14.2 76 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required. 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire. Dsr 1.14.4 77 Supplying And Fixing Metal Box Of 150 Mm X 75 Mm X 60 Mm Deep (Nominal Size) On Surface Or In Recess With Suitable Size Of Phenolic Laminated Sheet Cover In Front Including Providing And Fixing 3 Pin 5/6 A Socket Outlet And 5/6 A Piano Type Switch, Connections, Painting Etc. As Required. Dsr 1.29 78 Supplying And Fixing 20 Amps, 240 Volts, Spn, Industrial Type Socket Outlet, With 2 Poles And Earth Metal Enclosed Plug Top Along With 20 Amps. \C\ Curve, Sp Mcb In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Outlet, And Complete With Connections, Testing And Commissioning Etc. As Required. Dsr 2.18 79 Supply And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 80 Supply And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. Dsr 1.26 81 Supply And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required : 20 Mm. Dsr 1.21.1 82 Supply And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required : 25 Mm. Dsr 1.21.2 83 Supply And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required : 32 Mm. Dsr 1.21.3 84 Supplying And Fixing 5 Amps. To 32 Amps. Rating, 240 Volts `C Series, Miniature Circuit Breaker (Mcb)Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole Dsr 2.10.1 85 Supplying & Fixing Single Pole, Blanking Plate In The Existing Mcb Db Complete Etc. As Required. Dsr 2.11 86 Supplying And Fixing Following Rating, Double Pole, 240 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. 40 Amps Dsr 2.12.1 87 Supplying And Fixing Following Way, Sp&N, Sheet Steel, Mcb Distribution Board, 240 V On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb / Rccb / Isolator). 6 Way, Double Door Dsr 2.3.1 88 Supplying And Fixing Following Way, Horizontal Type Tp&N, Sheet Steel Mcb Distribution Board, 415 V On Surface /Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required (But Without Mcb / Rccb / Isolators). 4 Way (4 + 12), Double Door Dsr 2.4.1 89 Earthing With Gi Earth Plate 600Mm X 600 Mm X 6Mm Thick Including Accessories And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc, With Charcoal/ Coke And Salt As Required. Dsr 5.4 90 Supplying And Laying 25 Mm X 5 Mm. G.I. Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 91 Providing And Fixing 25 Mm X 5 Mm G.I. Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required. Dsr 5.11 92 Providing And Fixing 25Mm X 5 Mm G.I Strip On Surface Or In Recess For Connections Etc. As Required. Dsr 5.15 93 Providing And Fixing M.V. Danger Notice Plate Of 200Mmx150Mm Made Of Mild Steel, Atleast 2Mm Thick And Vitreous Enamelled White On Both Sides And With Inscription Single Red Colour On Frlsont Side As Required. Dsr 2.21 94 Providing And Fixing Circular/ Hexagonal Cast Iron Or M.S. Sheet Box For Ceiling Fan Clamp, Of Internal Dia 140 Mm, 73 Mm Height, Top Lid Of 1.5 Mm Thick M.S. Sheet With Its Top Surface Hacked For Proper Bonding, Top Lid Shall Be Screwed Into The Cast Iron/ M.S. Sheet Box By Means Of 3.3 Mm Dia Round Headed Screws, One Lock At The Corners. Clamp Shall Be Made Of 12 Mm Dia M.S. Bar Bent To Shape As Per Standard Drawing. Dsr Civil 10.18 95 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections Butexcluding Modular Plate Etc. As Required. 5/6 A Switch Dsr 1.24.1 96 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections Butexcluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet Dsr 1.24.4 97 Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required. 1 Or 2 Module (75Mmx75Mm) Dsr 1.27.1 98 Installation, Testing And Commissioning Of Pre-Wired, Flourescent Fitting / Compact Fluorescent Fitting Of All Types, Complete With All Accessories And Tubes Etc. Directly On Ceiling / Wall, Including Connection With 1.5 Sq. Mm. Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. Dsr 1.41 99 Installation, Testing And Commissioning Of Ceiling Fan Including Wiring The Down Rod Of Standard Length (Upto 30 Cm.) With 1.5 Sq. Mm. Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required. Dsr 1.45 100 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. Dsr 19.1 101 Supply Of Led Tube Light With Metal Heavy Duty Box Type Batten Light Fitting 2X22 Watt Suitable For Upto 2X22 Watt Led Polycarbonate Tube Light Complete Including Tube Suitable For Both Surface & Suspended Complete In All Respect. Mr 102 Supply Of Recess/Surface Mounting Round 10 W To 15 W Led Cut Out Min 125 Mm, Height Min. 40Mm, Led Down Lighiter Having Powder Coated Die Cast Aluminium Housing With Heat Shink,Diffuser/Reflector And Driver Set. Suitable For 24Hr Continuous Operation, Complete In All Respect. Mr 103 Supply And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. 16 Sq. Mm 4 Core Mr 104 Supply And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. 35 Sq. Mm 3-1/2 Core Mr 105 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 16 Sq. Mm 4 Core Dsr 9.1.33 106 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3½ X 35 Sq. Mm (35Mm) Dsr 9.1.21 107 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class-150 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr 6.1.1 108 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Slab Dsr 5.9.20 109 Cement Plaster 1:3 (1 Cement: 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement. 20Mm Thick Dsr 13.9.2 110 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr 11.3.1 111 Providing M.S. Foot Rests Including Fixing In Tank With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement:3 Coarse Sand :6Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr 19.15.1 112 500 Mm Diameter C.I. Cover (Medium Duty) The Cover To Be Not Less Than 58 Kg Dsr 19.18.2 113 C.I. Plain Bend (Dsr 17.39.1.2) Dsr 17.39.1.2 114 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 (Dsr 19.32.1) Dsr 19.32.1 115 Providing And Fixing Precast Rcc Garden Benches With Hand Rest, Each Bench Consists Of 2Nos. L-Shape Base Support In Grey Cement Colour Of Size 80Mm X 450Mm X 890 Mm And Base Width 690Mm, 1 No. Rcc Plank In Red Colour Of Size 1500Mm X 400Mm X 50Mm, And 1 No. Rcc Plank In Red Colour Of Size 1500Mm X 425Mm X 50Mm. Seating Length Of The Bench Is 1500Mm, Seating Height Of The Bench Is 450Mm And Total Height Of The Bench Is 1000Mm As Per Drawing Attached, Finishing Etc Complete And As Per The Direction Of Engineer-In-Charge. Mr 116 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. (I) 110 Mm Nominal Size Dia (Dsr 23.3.1) 117 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well Unplasticized Pvc Medium Well Screen (Rms) Pipes With Ribs, Conforming To Is: 12818, Including Hire & Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer-In-Charge. (I) 110 Mm Nominal Size Dia. (Dsr 23.4.1) 118 Supplying, Filling, Spreading & Leveling Coarse Sand Of Size Range 1.5 Mm To 2 Mm In Recharge Pit, In Required Thickness Over Gravel Layer, For All Leads & Lifts, All Complete As Per Direction Of Engineer -Incharge. (Dsr 23.7) 119 Providing And Fixing Suitable Size Threaded Mild Steel Cap Or Spot Welded Plate To The Top Of Bore Well Housing/ Casing Pipe, Removable As Per Requirement, All Complete For Borewell Of: 100 Mm Dia (Dsr 23.13.1) 120 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. 32 Mm Dia Nominal Bore (Dsr 18.12.4) 121 Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing/ Housing Pipe Of Tubewell As Per Is: 2800 (Part I), Including Necessary Bolts & Nuts Of Required Size Complete. 100 Mm Clamp (Dsr 23.14.1) 122 Providing And Fixing Bail Plug/ Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tubewell As Per Is:2800 (Part I). 100 Mm Clamp (Dsr 23.15.1) 123 S/F 1.5 H.P. Submersible Pump With Control Pannel, Cable, Columnpipe And All Accessories Complete. Mr 124 S/F Of Finolex Of Copper Cable Isi Marked Submersible Cable Size 4Sqm 4Core. Mr 125 Excavation Work By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soils As Directed, Within A Lead Of 50 M. Dsr 2.9.1 126 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick Dsr 8.14.1.5 127 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr 8.15 128 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 129 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished,Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanitycounters, Window Sills , Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cementmortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement,Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Area Of Slab Over 0.50 Sqm (Granite Of Any Shade) Dsr 8.2.2.2 130 Cost Of Stone Writing. Mr 131 S/F Of Decorative 8To 16 Watt Led Bollard Luminaire With Driver Set Confirming To Ip 65 Protection Complete In All Respect. Mr 132 S/F Of Factory Wired Led Flood Light Luminaries With Die Cast Aluminium Housing Built With Driver Set Suitable For 40To50Watt Confirming T Ip 65/66 Protection Complete In All Respect. Mr 133 Preparation And Consolidation Of Sub Grade With Power Road Roller Of 8 To 12 Tonne Capacity After Excavating Earth To An Average Of 22.5 Cm Depth, Dressing To Camber And Consolidating With Road Roller Including Making Good The Undulations Etc. And Re-Rolling The Sub Grade And Disposal Of Surplus Earthwith Lead Upto 50 Metres. Dsr 16.1 134 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge. 80 Mm Thick C.C. Paver Block Of M-30 Grade With Approved Color Design And Pattern. Dsr 16.91.2 135 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineerin- Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast C.C. Kerb Stone Shall Be Approved By Engineer-In-Charge). Dsr 16.69 136 Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Leveling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or/And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure). Dsr-2020 (H &L) 137 Supplying And Stacking Of Good Earth At Site Including Royalty But Including Carriage 1Km (Earth Measusred In Stacks Will Be Reduced By 20% For Payment). Dsr-2020 (H &L) 138 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Up To 1 Km (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 16 Mm Dsr-2020 (H &L) 139 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge.. Dsr-2020 (H &L) 140 Spreading Of Sludge, Dump Manure And/Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And/ Or Good Earth To Be Paid Separately). Dsr-2020 (H &L) 141 Rough Dressing The Trenched Ground Including Breaking The Clods. Dsr-2020 (H &L) 142 Fine Dressing The Ground Dsr-2020(H &L) 143 Digging Holes In Ordinary Soil And Refilling The Same With The Excavated Earth Mixed With Manure Or Sludge In The Ratio Of 2:1 By Volume (2 Parts Of Stacked Volume Of Earth After Reduction By 20% : 1 Part Of Stacked Volume Of Manure After Reduction By 8%) Flooding With Water, Dressing Including Removal Of Rubbish And Surplus Earth, If Any, With All Leads And Lifts (Cost Of Manure, Sludge Or Extra Good Earth If Needed To Be Paid For Separately) :Holes 90 Cm Dia, And 90 Cm Deep Dsr-2020 (H &L) 144 Preparation Of Beds For Hedging And Shrubbery By Excavating 60 Cmdeep And Trenching The Excavated Base To A Further Depth Of 30 Cm, Refilling The Excavated Earth After Breaking Clods And Mixing With Sludge Or Manure In The Ratio Of 8:1 (8 Parts Of Stacked Volume Of Earth After Reduction By 20% : One Part Of Stacked Volume Of Sludge Or Manure After Reduction By 8%), Flooding With Water, Filling With Earth If Necessary, Watering And Finally Fine Dressing, Leveling Etc. Including Stacking And Disposal Of Materials Declared Unserviceable And Surplus Earth By Spreading And Leveling As Directed, Within A Lead Of 50 M, Lift Up To 1.5 M Complete (Cost Of Sludge, Manure Or Extra Earth To Be Paid For Separately). Dsr-2020 (H &L) 145 Providing And Stacking Of Hamelia (10X10X600Mm) As Per Direction Of The Officer-In-Charge. Mr 146 Providing And Stacking Of Casurina Topiary (300X300X1800Mm) As Per Direction Of The Officer-In-Charge. Mr 147 Providing And Stacking Of Plumeria Alba Bushy (300X300X2400Mm ) As Per Direction Of The Officer-In-Charge. Mr 148 Providing And Stacking Of Ground Cover Grass As Per Direction Of The Officer-In-Charge. Mr
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Uttar Pradesh View Result →
19.
Power #11110319 Technical Bid
Tender for Rate Contract For Procurement Of Material That May Be Required During The Emergencies For The Year 2026-27 In Respect Of Ed-3Rd , Supply Of , 50 Mm² Ab (Ht) Cable (3X50 + 1X70 Mm²) Xlpe(11 Kv, 3C + Earth) , 70 Mm² Ab (Ht) Cable (3 X 70 + 95 Mm²) Xlpe(11 Kv, 3C + Earth) , 120 Mm² Ab (Ht) Cable (3X120 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 150 Mm² Ab (Ht) Cable (3X150 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 185 Mm² Ab (Ht) Cable (3X185 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 11 Kv Heat Shrinkable Outdoor Cable Termination Kit Upto 50- 95 Sqmm ( 3 Core) , Heat Shrinkable Outdoor Cable Termination Kit Above 120 To 185 Sqmm ( 3 Core) , Mid Span Straight Through Jointing Kit For 11 Kv Abc 120 -185 Sqmm , 35 Mm² Ab (Lt) Cable ( 3 X 35 + 1 X 16 + 1 X 25 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 50 Mm² Ab (Lt) Cable ( 3 X 50 + 1 X 16 + 1 X 35 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 70 Mm² Ab (Lt) Cable ( 3 X 70 + 1 X 16 + 1 X 50 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 95 Mm² Ab (Lt) Cable ( 3 X 95 + 1 X 16 + 1 X 70 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 120 Mm² Ab (Lt) Cable ( 3 X 120 + 1 X 16 + 1 X 70 Mm²) Xlpe (1.1Kv, 3+1 C, Al) , Mid Span Straight Through Jointing Kit For 1.1 Kv Abc 95-150 Sqmm , Mid Span Straight Through Jointing Kit For 1.1 Kv Abc 35-70 Sqmm , 70 Mm² Single-Core Cable, 1.1Kv Grade, Xlpe Un-Armoured Frls Type , 95Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 120 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 150 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 185 Mm² Cable, 1.1Kv Grade, Xlpe Un Armoured Frls Type , 240 Mm² Single Phase Cable,1.1K V Grade, Xlpe Un Armoured Frls Type , 300 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 400 Mm² Single Phase Cable,1.1K V Grade, Xlpe Un Armoured Frls Type , 500 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 630Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 10 Mm² Cable (2C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 16 Mm² Cable (2C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 10 Mm² Cable (4C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 16 Mm² Cable (4C),1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 25 Mm² Xlpe Lt Cable 4 Core, Armoured, Frls , 35 Mm² Xlpe Lt Cable 4 Core, Armoured, Frls , Single Core 1 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 1.5 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 2.5 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 4 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 6 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , 11 Kv, 3- Core Xlpe 35 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 50 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 70 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 120 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 150 Mm² Round Wire Armoured, Frls Cable , 11Kv, Three Core 185 Mm2 Aluminium Round Wire Armoured Xlpe Cable , Frls , 11 Kv, 3- Core Xlpe 240 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 400 Mm² Round Wire Armoured, Frls Cable , 11 Kv End Termination For 3C 120- 185 Mm² , 11 Kv End Termination For 3C 240 To 400 Mm² , 11 Kv Straight Through Jointing Kit Upto 50-95 Mm² , 11 Kv Straight Through Jointing Kit Upto 120-185 Mm² , 11 Kv Straight Through Jointing Kit Upto 240-300 Mm² , 11 Kv Straight Through Jointing Kit Upto 400 Mm² , Lt Distribution Box For 25 Kva Dtr With 40 annual periodical maintenance Mccb 3P 16 Ka For Incomer & 25 annual periodical maintenance Mccb 3P 16 Ka/10 Ka 1 No. Each (=2No.) For Outgoing Circuits . , Lt Distribution Box For 63 Kva Dtr With 100 annual periodical maintenance Mccb 3P 16 Ka For Incomer & 100 annual periodical maintenance Mccb 3P 16 Ka 1 No. And 63 annual periodical maintenance Mccb 3P 16 Ka 1 No.S For Outgoing Circuits , Lt Distribution Box For 100 Kva Dtr With 160 Mccb 3P 16 Ka For Incomer & 100 annual periodical maintenance Mccb 3P 16 Ka 2 No.S For Outgoing Circuits , Lt Distribution Box For 200 Kva Dtr With 315 annual periodical maintenance Mccb 3P 25 Ka For Incomer & 160 annual periodical maintenance Mccb 3P 16 Ka 3 No.S For Outgoing Circuits , Lt Distribution Box For 250 Kva Dtr With 400 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 1 No. And 160 annual periodical maintenance Mccb 3P 16 Ka 2 No.S For Outgoing Circuits , Lt Distribution Box For 400 Kva Dtr With 630 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 4 No.S For Outgoing Circuits , Lt Distribution Box For 400 Kva Dtr With 630 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 4 No.S For Outgoing Circuits , Temporary Lt Fuse Set For Distribution Transformers (Customised) As Per Kpdcl Drawing No. Ce/P&P/Drg/2023/Ltfs/001 (Enclosed) , 11Kv Polymeric Composite Disc Insulator 12Kv,Min Failing Load 45Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm Nos , 11Kv Polymeric Composite Pin Insulator 12Kv, 5Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm , 16 Kn Polymer Shackle Insulator , G.I Mukey For Shackle Insulators With Bolt Of (50X8)Mm , Gi U-Clamps For Shackle Insulator 50X8 Mm, (3.14 Kg/Mtr), 258 Mm , Gi U-Clamps For Shackle Insulator 50X8 Mm, (3.14 Kg/Mtr), 369 Mm , 11 Kv Link Set Heavy Duty With Copper Blade Size Of 14 Inch, 50 X 6 Mm, Female Contact Of Copper 6 Mm Thickness, With Post Insulator Of 10 Kn , 11 Kv Go, Ab Switch 3-Phase, 3-Pole,200 Amp, Vertical Type Set , 11 Kv Horn Gap Fuse Set 3 Phase 200A Set , Pg Clamps For 30 Mm² Acsr Conductor , Pg Clamps For 50 Mm² Acsr Conductor , Pg Clamps For 100 Mm² Acsr Conductor , Suspension/Tension Clamp With Eye Hook , Gi Pole Support Clamp Including Gi Nut And Bolts For 11 Mtr Pole With Size - 50X8x376 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 9 Mtr Pole With Size - 50X8x376 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 8 Mtr With Size 50X 8X 328 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 8 Mtr Or 9 Mtr Plain Cement Concrete With Size 50X8x441mm , Cable Tie (Each Packet Contains 100 Nos.) , Cable End Caps , Insulating Piercing Connectors Of Sizes , 11 Kv Ipc (Insulation Piercing Conductors)For Bare To Cc(Covered Conductor) Connection , 11 Kv Ipc For Covered Conductor To Covered Conductor Connection , 33 Kv Tension Clamps With Bail And Ipc (Insulation Piercing Conductors) , 33 Kv Ipc (Insulation Piercing Conductors)For Bare To Cc(Covered Conductor) Connection , 33 Kv Ipc For cement concrete To cement concrete Connection , 33 Kv Ipc With Aluminium Bail For Earthing , Main Single Phase Service Distribution Box (Pole Db) Along With Mccb /Mcb As Per Rec Drawing. The Db Should Have Bottom Entery Of Cable With Proper Glands/Grommets-Safety Screws And Back Clamp Suitable For 11/9/8 Mtr St Pole Or 9/8 Mtr Plain Cement Concrete Poles With Nuts/Bolts , Main 3 Phase Distribution Box Ip 54 (Pole Db) Made From 20 Swg Crca Ms Sheet By Deep Drawn Method With Powder Coating. Internal Size Of The Box Shall Be 225Mm X 285Mm X 120Mm Used For Connection Through Abc Line And For Giving Connections To The Consumers 3Phase-1 Incoming 4 Outgoing I/C- 1, O/G-2-4 (200 A, 0.415 Kv) For Ryb Phase. The Db Should Have Bottom Entery Of Cable With Proper Glands/Grommets-Safety Screws And Back Clamp Suitable For 11/9/8 Mtr St Pole Or 9/8 Mtr Plain Cement Concrete Poles With Nuts/Bolts , Lt Line Spacers 3 P ,4 Wire , Lt Line Spacers 2 P ,3 Wire , Gapless Surge Arrestor,9 Kv ,10 Ka ,La With Polymer Housing, Stn. Type , 3-Ø, 4-Wire Trivector Meter (Prodigy ) With Suitable Ring Type Ct 200 annual periodical maintenance (Net Meter Enabled) , Single Phase Smart Energy Meter 5-30 Amp/ 10-60 Amp, Dlms Complaint Of Accuracy Class 1.0 , Three Phase Smart Energy Meter 20-80 Amp/, Dlms Complaint Of Accuracy Class 1.0 , Polypropylene Weather Proof Outdoor Type Meter Box For Single Phase Meter Along With Zinc Plated Clamps , Polypropylene Weather Proof Outdoor Type Meter Box For Three Phase Meter Along With Zinc Plated Clamps , Polypropylene Weather Proof Outdoor Type Meter Box For 4 Single Phase Meter Along With Zinc Plated Clamps , Gi Barbed Wire For Anti Climbing , Danger Plates With Clamps , Anti-Climbing Device With Clamps , Cemical Earthing Complete , Earthing Mat (Gi Flat 50 Mm X8 Mm)/(75 X10)Mm/(75X8)Mm , Gi Pipe 40 Mm 3 Mtr Long For Earthing , Earthing Electrode ( 3M Long) 20 Mm Dia. , Gi Strip 25X3 Mm , Galvanized Earthing Strips 50Mm X3mm. , Red Oxide , Aluminium Paint , Galvanized Nuts And Bolts , Galvanised Stay Set With 50X8mm Stay Clamp, Guy Insulator(2No..), Anchor Plate (200X 200 X 6 Mm), Nut-Bolts, 2 No. Turn-Buckles, 1.8M Long, 16 Mm Diameter Solid Gs Stay Rod & 7/3.15 Mm Dia Gi Stranded Wire Complete (11 Kv) , Galvanised Stay Set With 50X8mm Stay Clamp, Guy Insulator(2Nos.), Anchor Plate (300X 300 X 8 Mm), Nut-Bolts, 2 Nos Turn-Buckles, 1.8M Long, 16 Mm Diameter Solid Gs Stay Rod & 7/3.15 Mm Dia Gi Stranded Wire Complete (33 Kv) , Gi V Cross-Arm With Top Bracket Of Sizes , Gi Channel X-Arm And Braces Of Sizes , Gi Extension Riser Of Sizes , Gi Wire 6 Swg & 8 Swg , Guard Netting (For 52 Mtr Span) , Aluminium Jointing Sleeves 100 Sqmm , Aluminium Jointing Sleeves 50 Sqmm , Aluminium Jointing Sleeves 30 Sqmm , Suspension Fitting (2 Bolt) For 11 Kv Line , Tension Fitting (4 Bolt) For 11 Kv Line , Suspension/Tension Clamp With Eye Hook , Earth Wire 7/4 Sqmm , 1 Phase 2 Wire, 415V, 1Nos Of 100 Amps Incoming Sp Mccbs Fitted With Outgoing 04 No 32 Amps Sp Mcbs For Service Connections, Distribution Service Pillar Suitable For Outdoor Installation, Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 2P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accesories 4 Way Distribution Service Pillar. , 3 Phase, 415V, 1No Of 250 Amps Incoming 3 Tp Mccbs (Breaking 36Ka) Fitted Withoutgoing 03 No 100 Amps Sp Mccbs, 1No.100Amps 3 Pole Mccb For Outgoing Lt Cables, Distribution Feeder Pillar Suitable For Outdoor Installation , Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 4P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accesories 4 Way Distribution Feeder Pillar. , Fire Extingiusher Co₂ Type Of 4.5 Kg Capacity For Control Room , 3 Sand Bucket Fire Extingiusher , Gum Boots With Steel Toe Of Sizes , Winter Jacket- Coat Ecc Consists Of Three Independent Components That Is Wind Cheater ( Waterproof ), Insulating Layer And Waist Coat ( Sleeve Less ), Three Layer Waterproof Breathable Fabric, Dual Shade Og/ White, Material Of Insulating Layer- 1. Batting Polyester, 100 Gsm, 2. Fabric Nylon Knitted Aluminized, 3. Fabric Nylon 75 Gsm White, Material Of Waist Coat- Double Layer Bonded Polyester Fleece , Safety Vest - Reflective Luminous Garments - High Visibility Warning Garments With Synthetic Slide Fasteners, Fluorescent Yellow, Width Of Retro Reflective Material For All Types Of Garments (Minimum) 50 Millimeter , Non-Contact Voltage Detector, Upon Detection, Tip Glows And Beeper Sounds, Cat Iv 1000 V For Added Protection, Expanded Range: 90 V To 1000 V Ac Or 200 V To 1000 V Ac, Battery Cell Operated (2 Aaa Or Standard), Voltbeat Technology And Continuous Self-Test , Safety Helmet- Quality Of Shell High Quality, High Impact, Light Weight,Tough, Conformity To Specification- Is 2925:Latest ,En 397 Certified , Safety Rubber Gloves Up To 15 Kv As Per Iec Standard , Safety Belt/Harness With Shock Absorber , Safety Shoes Of Sizes -Personal Protective Equipment - Safety Footwear As Per Bis Specification No Is 15298 ( Part 2 ): 2016, Toe Cap- ( Steel ) Metallic, Insole, Classification- Class I ( Footwear Made From Leather And Other Materials, Excluding All-Rubber Or All-Polymeric Footwear ) With Different Sizes, Slip Resistant- As Per Clause 5.3.5.4 Of Is 15298 ( Part 2 )- Slip Resistance On Ceramic Tile Floor With Nals And On Steel Floor With Glycerine. , 11 Kv Earthing/Discharging Rod (Set Of 3 Rods) Set With Minimum 20 Sqmm Cable And U-Clamp , Battery Operated 12 Kv Voltage Detector (Cpri Tested) Complete Kit Including Hv Detector Probe, 20 Feet Frp Insulation Stick, Carrying Bag. The Detector Should Have Audio As Well As Visual Anunciation, Sensing Distance Of 1 Meter For 11Kv. Bright High Intensity Red Leds For Visual Annunciation Even In Unfavourable Daylight Conditions And A Buzzer To Produce Loud Beep Audible Even In Noisy Backgrounds , Alumunium Ladder 2*20 (Double Ladder) 3 Mm Thick Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope And Pulley Arrangement , Alumunium Ladder 2*15 (Double Ladder) 3 Mm Thick Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope And Pulley Arrangement , Aluminium Ladder 2*10 Ft Long, Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope , Bamboo Ladder 18 Ft Long, Natural Bamboo Finish, Min Load Bearing Capacity Of 150 Kg , Bamboo Ladder 20 Ft Long, Natural Bamboo Finish, Min Load Bearing Capacity Of 150 Kg , Wart Free Budloo Wooden Ladder 17 Feet Long And Slightly Tappered Upwards The Steps Are To Be Fixed With Flat Galvinized Iron Strip With Galvinized Nails. The Foot Of The Ladder To Be Provided With Rubber Anti Skid Hold. , Wart Free Budloo Wooden Ladder 20 Feet Long And Slightly Tappered Upwards The Steps Are To Be Fixed With Flat Galvinized Iron Strip With Galvinized Nails. The Foot Of The Ladder To Be Provided With Rubber Anti Skid Hold. , Telescopic Ladder 20 Ft Long, 6063 T5 Grade Of Aluminium , 150 Kg Load Capacity, Self Locking Mechanism, Anti-Skid Foot Caps , Hand Held Search Light Led Lamp, 100 Watt With Lithium Ion 3.7 V, 3.5 Ah, 500 Lux/100 Mtr With Lamp Life -50000 Hours, Ip 65, 12 Months Warranty , Hdpe Pipe Outer Dia 180 Mm Inner Dia 152 Mm For Laying Of 11Kv Xlpe Cable From Power Transformer To Control Room , Mccb - 200 Amps,36Ka,4P Adjustable , Mccb - 40 Amps,36Ka,4P Adjustable , Mccb - 63 Amps,36Ka,4P Adjustable , Mccb - 100 Amps,36Ka,4P Adjustable , Mccb - 160 Amps,36Ka,4P Adjustable , Mccb - 250 Amps,36Ka,4P Adjustable , Mccb - 400 Amps,36Ka,4P Adjustable , Mccb - 630 Amps,36Ka,4P Adjustable , Mccb - 200 Amps,36Ka,3P Adjustable , Mccb - 100 Amps,36Ka,3P Adjustable , Mccb - 160 Amps,36Ka,3P Adjustable , Mccb - 250 Amps,36Ka,3P Adjustable , Mccb - 400 Amps,36Ka,3P Adjustable , Mccb - 630 Amps,36Ka,3P Adjustable , Bobin Insulators Clamps/Cliffs. , Epoxy Resin Cast Panel Insulators Upto 500Mm , 18 Feet Fiber Link Rod , 18 Feet Bamboo Link Rod , Al. Solderless Clamps Suitable For Transformer 1000 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 630 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 400/500 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 250 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 100 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 63 Kva As Per Relevant Is , Aluminium Thimbles 630 Mm2 As Per Relevant Is , Aluminium Thimbles 500 Mm2 As Per Relevant Is , Aluminium Thimbles 400 Mm2 As Per Relevant Is , Aluminium Thimbles 300 Mm2 As Per Relevant Is , Aluminium Thimbles 240 Mm2 As Per Relevant Is , Aluminium Thimbles 185 Mm2 As Per Relevant Is , Aluminium Thimbles 120 Mm2 As Per Relevant Is , Aluminium Thimbles 95 Mm2 As Per Relevant Is , Aluminium Thimbles 70 Mm2 As Per Relevant Is , Aluminium Thimbles 50 Mm2 As Per Relevant Is , Aluminium Thimbles 35 Mm2 As Per Relevant Is , Aluminium Thimbles 25 Mm2 As Per Relevant Is , Aluminium Thimbles 16 Mm2 As Per Relevant Is , Aluminium Thimbles 10 Mm2 As Per Relevant Is , Dpc Copper Winding Wire (Round) In Sizes 11 To 22 Swg Fresh. , Dcp Copper Strip Of Sizes For Lv Winding Of Distribution Transformers 250 Kva To 630 Kva Fresh. , Se Copper Winding Wire (Round) In Sizes 11 To 22 Swg. , Dpc Aluminium Winding Wire (Round) In Sizes From 12 To 20 Swg-Fresh , Dpc Aluminium Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva - Fresh , Se Aluminium Winding Wire (Round) In Sizes 12 To 20 Swg-Fresh , Dpc Copper Winding Wire (Round) In Sizes 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Copper Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Se Copper Winding Wire (Round) In Sizes 11 To 22 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Aluminium Winding Wire (Round) In Sizes From 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Aluminium Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Se Aluminium Winding Wire (Round) In Sizes 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Lv Brass Bush Rods 12 Mm , Lv Brass Bush Rods 19 Mm , Lv Brass Bush Rods 25 Mm , Lv Brass Bush Rods 32 Mm , Press Card Board Soft Calendared Solid 1Mm/2Mm/3Mm(As Per Sample) , Press Card Board Pre Compressed Solid 1Mm/2Mm/3Mm. , Ht Insulating Gum , Glass Wool Sleeves Of Sizes , Aluminium Brazing Rod (Standard Length) , Copper Brazing Rod (Standard Length) , Flexible Copper Strip (Shim) 75Mm X 0.5 Mm , Pvc Sheets 1 Mm Thick , Empire Tape 1 , Electrical Grade Kraft Paper, 4 Mil , Leatheroid Insulation Paper 20 Mil. , Hv Bushing , Lv Bushes Suitable For 63 To 100 Kva Dt , Lv Bushes Suitable For 200 To 250 Kva Dt , Lv Bushes Suitable For 400 To 630 Kva Dt , Epoxy Resin Cast 1.1 Kv Low Voltage Transformer Bushing With Busbar For 400/630 Kva Dt , Cotton Tape 1 (Size) 35 M Long. , Rubber Washers , Ht Paper , Cork Washer 12Mm Dia , Cork Washer20mm Dia , Cork Washer 25Mm/30Mm Dia , Plastic Metre Seals , Trifor (Tower Roller) , Transformer Oil Filitration Plant Filter Elements Of 1 Micron(60X250) Mm For Transformer Oil Filitration Plant , Heating Elements Of 2000 Watts For Transformer Oil Filtration Plant , Press Cardboard Cutter Having Bed=52X21 With Height Of Machine 45 With No. Of Tensile Springs 2 Nos. Complete In All Respects. , Angle Grinder, 800W Power, No-Load Speed Of 11000 Rpm, 100 Mm Disc , Welding Machine(Inverter Type) =5=10 Kva Rated Input Power, Maximum Welding Current At 60% Duty Cycle (In A) 150=250, Adjustable Hot Start,Anti-Stick Functions,Arc Force Control , Cordless Impact Drill/Drivers With 2 Batteries, Ideal For Driving Screws Into Wood And Drilling Into Masonry, Metal, And Wood , Pneumatic Air Impact Wrench With Sockets From 15 To 30 , Air Compressor 50 Ltr , Hand Held Brush Cutter , Hydraulic Crimping Tool , Pallet Truck 3 Ton , Hand Driven Insulation Resistance (Meggar) , Multimeter(Analog) , Multimeter(Digital) Voltage: Dc: 1000 Volts; Ac: 1000 Volts; Dc Accuracy: ± 0.5% + 3 Digit; Ac Accuracy: ± 1% + 3 Digit; Current: Dc: 10 Amps; Ac: 10 Amps; Dc Accuracy: ± 1.5% + 3 Digit; Ac Accuracy: ± 1.5% + 3 Digit; Resistance: 40 M Ohm; Resistance Accuracy: ± 1.5% + 3 Digit ; Capacitance: 1000 Μf; Capacitance Accuracy: ± 5% + 5 Digit Cat Iii 600 Volts Safety Rating , Pliers -Type Of Hand Tool-Combination Plier As Per Is 6149, Type Of Insulation-Rubber Insulation, Material-Carbon Steel , Nawara Tape 1 (Size) 35 M Long. , Rubberized Cork Sheet 4 Mm Thick 2Ftx3ft , Rubberized Cork Sheet 3Mm Thick 2Ftx3ft , Bakelite Tubes 12Mm Dia ( 1 Mtr Long) , Hv Bush Clamps (Ms) , Aluminium Clamping Member (Shoes) For Hv Bushing , Lv Cork Washers 12 Mm Dia , Lv Cork Washers 20Mm Dia , Lv Cork Washers 25 Mm/30 Mm Dia , Nuts & Bolts (M.S) Of Sizes. , M.S Flat Washers. , Hv Cork Washers 110 Mm O.D , Aluminium Welding Flux , Aluminium Flat 4/6/8/10 Mm Thick Of Required (Busbar) , Copper Flat 4/6/8/10 Mm Thick Of Required Width. (Busbar) , Ms Plug & Caps 1/2 ; 3/4; /1; 1.1/4; 1.1/2 , Oil Seal Rings (O-Rings) For Lv/Hv Bush Rods 12 Mm Dia. , Oil Seal Rings (O.Rings) For Lv/Hv Bush Rods 20 Mm Dia , Oil Seal Rings (O.Rings) For Lv/Hv Bush Rods 25 Mm Dia , Creep Tape 1 , Cotton Cloth , Empire Sleeves Of Sizes , Synthetic Enamel Paint Smoke Grey Colour , Paint Thinner , Steel Primer , Silica Gel , Transformer Oil As Per Is 335 And Amendments Thereof , Welding Rods 3.15 Mm/4Mm. (100 No. Per Packet) , Refilling Of Oxygen Gas For Brazing , Refilling Of Lpg Gas For Brazing , 12 Piece Tool Kit (1-Piece Screwdriver, 1-Piece Hammer, 7-Pieces Screwdriver Bits, 1-Piece Plier, 1-Piece Wrench(Adjustib And 1-Piece Measuring Tape) Bosch/Dewalt/Taparia , Clamp Meter, Conforms To Iec 61010, Cat Ii 600V Safety Rated, 600A Ac Current Measurement, Ac/Dc Voltage, Resistance, Continuity & Data Hold Function, 2 Years Manufacturer Warranty [Fluke/Digi Sense/ Motwane/Extech] , 12 Volts, 42 Ah Lead Acid Battery , 12V 7 Ah Rechargeable Sealed Maintenance Free Battery (Smf) For Ups , Battery Connector For 12 V Battery Bank (12 No. Both Ends Of Each Connector Should Be Properly Clamped With Nuts, Bolts, Washers) , Fabricated Gi Pollar Collar 50X6 Mm With Nuts And Bolts , Digital Weighing Scale Upto 1 Ton , Portable Professional Petrol Chainsaw,18 Inch Or Above, 2 Kw Or Above, Pitch Of 3/8 Or Above, Petrol Capacity 400 Ml Or Above. , Double Ply Polyester Webbing Slings, Load Capacity 6 Tonne , Dee Shackles Forged Shackles, Working Load 6.5 Tonne , Eyebolt With Recessed Collar With Maximum Axial Lifting Capacity Of 6 Tonne , Handheld Brush Cutter / Line Trimmer, With Nylon Feed Head Attachment Petrol Engine Low Vibration Centrifugal Clutch, Hardened Steel 2 Teeth Blade, Bump / Tap & Go Type, Shaft Length (Mm) 1425 To 1449, Circular Saw Attachment Inclusive In The Scope Of Supply , Portable Hydraulic Crimping Tool For 30 Sqmm To 400 Sqmm With All Attachments , Pre Fabricate Galvanized Single Way Top Bracket (1000 Mm Long With 48.3 Od Gi Pipe) To Be Fitted On Top Of Octogonal Pole For Holding Lighting Luminaries. , Dk Thermoplastic Cable Junction/ Termination T Boxes 8X10Of Class Ip55/Ip65 Fitted With Two 2-5 annual periodical maintenance Mcb Strip,4-Way Terminal Block / Connectors Incl. Copper Lugs, Clamps ,Nut & Bolts Washers Etc (Hansel Or Equivalent Make) Or Poles With Two Way Type Bracket To Be Fitted Properly Inside The Door Opened Gear Box Provided On Thebottom Side Of The Pole. , Surge Protector For The 120/190 Watt Led Type Lighting Fixture Complete. , Outdoor Type Lt Control Panel Size 900Mmx900mmx450mm Having Input Main Control Of 100 annual periodical maintenance Mccb With Tpn Bus Bar With 40 annual periodical maintenance Tpn Mcb 4Nos For Outgoing Circuits,Including Astronomical Switching With Contactor Of Required Capacity. The Panel Should Be Fitted With A Digital Composite Voltmeter/Ampermeter/Indicator Set With Selecter Switch And Backup Protection System, Thimbling And The Panel Shall Further Be Provided With Proper Openings On Front Side As Well As On Rear Side Including Its Locking Arrangement And Also With Required Glands And 4No. Angle Iron Legs For Grouting The Panel On Bed , The Panel Shall Also Be Provided With Powder Coat/Pu Paint. The Item Includes Its Thimble As Required At Taping Point For Incomming , Out Going And Internal Panel Wiring Complete Unit. , Dust/Rain/Snow-Proof Canopy Type Mini-Outdoor Lt Feeder Panel Of Size 450X300mm With Front Door Opening Duly Powdered Colour Coated With Inbuilt 2No Tpn 16-32 annual periodical maintenance Mccb,Tpn Busbars Of Same Capacity Installed On Cement Concrete Block With 4 Angle Iron Legs Grouted In The Cement Concrete Of Termination Of Main 25Sqmm Cable And Outgoing 25/16 Sqmm Cable Circuits. , 120 Watt Led Luminaries Of Ip 67 Protection. , 190 Watt Led Luminaries Of Ip 67 Protection. , 110 W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 70W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 50 W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 30W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 6 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 1Pole With 1Pp, 240 V , 10 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range B, 1Pole With 1Pp, 240 V , 10 A Dp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2 Pole With 2 Pp, 240 V , 16 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 1Pole With 1Pp, 240 V , 16 A Spn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2Pole With 1Pp, 415 V , 16 A Tp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 3Pole With 3Pp, 415 V , 32 A Tpn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 4 Pole With 3 Pp, 415 V , 32 A Tp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 3 Pole With 3 Pp, 415 V , 32 A Dp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2 Pole With 2 Pp, 415 V , 32 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range B, 1 Pole With 1 Pp, 415 V , 63 A Tpn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 4 Pole With 3 Pp, 415 V , Astronomical Timer For Street Light Control, 3 Phase, 18 Kw/43 A Each Phase, Ip 66, Manually Settable Timer With 12 Programmes Spreaded Over A Year As Defined Programme, 260 Volt +/- 5 Volt Over Voltage Protection Per Phase, 160 Volt +/- 5 Volt Under Voltage Protection Per Phase, Operating Temperature Range -10 To +50 Deg C, /=60 Seconds On/Off Timing Accuracy , Embossing Punch Die Tool For Dt Coding (A-Z And 0-9) , Battery Operated Engraving Machine , Hand Operated Oil Pump/Barrel Pump , Manilla Rope - 25 Mm , Nylon Rope- 20 Mm , 11Kv Pilfer Resistant Metering Cubicle For 3Phase 4 Wire Metering System Made Of Ms Sheet Steel Thickness Not Less Than 2Mm Duly Power Coat Painted Suitable For Indoor As Well As Outdoor As Per The Site Requirement. The Cubicle Shall Be Painted Through 7-Tank Process. The External Dimensions Should Be Adequate. Panel Having Two Compartments Upper Meter Compartment And Lower Ct/Pt Compartment. Provided With Synthetic Or Semi Synthetic Gasket Firmly Glued To The Sufrace, Dust, Weather And Vermin Proof And Shall Comply Degree Of Protection Ip 65 Both The Chambers Having One Sided Hinged Door Arrangments. The Metering Panel Shall Be Provided With Two No Ms Channels Of Size 100 X 50 Mm On The Front And Rear Sides Duly Welded And 4 No Of Lifting Hooks. It Should Be Possible To Take Meter Reading Manually, Through Cmri And Computer Without Opening The Lv Chamber Door. , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 2.5 /5 For 25Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 5/5 For 63Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 7.5/5 For 100Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 15/5 For 200Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 20/5 For 250Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 25/5 For 400 Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 50/5 For 630 Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 75/5 For 1 Mva Dt , 11Kv/ 110 V, Three Phase Epoxy Resin Cast Pt With Rated Burden 15Va Per Phase And Accuracy Class 0.5 Or Better And Conforming To Is:3156 (Part-I&Ii) Amended Upto Date With Proper Colour Coded Identification. Pts Shall Be Of Uniform Insulating And Withstand Separate Source 23Kv providing fixing For One Minute. , 3Ph, 3 Wire Ht Ct/Pt Operated Fully Static Smart Tri-Vector Energymeters Dlms Compliantcategory C With Rs232 Port For Modem Compatibility. 11Kv/110V, Ph-Ph (3P,3W) Metersfor Measurement Of Different Electrical Parameters Including Active Energy (Kwh/ Mwh), Reactive Energy (Kvarh/Mvarh), Apparent Energy (Kvah/ Mvah) Etc. (Make L&T, Secure,Abb) , Led String Light 15 Mtr Long Of Different Colours (Saffron/White/Green) With Controller. , 4 Socket Extension Boards With Each Compatible Sockets Of 16 annual periodical maintenance And 5 Mtr Long Cable And Plug Along Surge Protector And On/Off Controller.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
Jammu And Kashmir View Result →
20.
Public Administrative Department #11109429 AOC
Tender For Master Plan Kalagram At P.L. Deshpande Udyan To Carry Out Various Development Works Remaining work -ITEM NO : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m.) By Manual Means ( SSR Item No : 21.01 ) (PMC Bhavan ) Unique No (15201) Rate List Year (2024-2025) ITEM NO : 2 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. ( SSR Item No : 46.09 ) (PMC Bhavan ) Unique No (16016) Rate List Year (2024-2025) ITEM NO : 3 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. ( SSR Item No : 46.12 ) (PMC Bhavan ) Unique No (16019) Rate List Year (2024-2025) ITEM NO : 4 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. ( SSR Item No : 46.13 ) (PMC Bhavan ) Unique No (16020) Rate List Year (2024-2025) ITEM NO : 5 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete ( SSR Item No : 46.19 ) (PMC Bhavan ) Unique No (16026) Rate List Year (2024-2025) ITEM NO : 6 Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. SSR Item No : 46.14 ) (PMC Bhavan ) Unique No (16021) Rate List Year (2024-2025) ITEM NO : 7 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge SSR Item No : 78.36 ) (PMC Bhavan ) Unique No (17223) Rate List Year (2024-2025) ITEM NO : 8 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. SSR Item No : 21.36 ) (PMC Bhavan ) Unique No (15231) Rate List Year (2024-2025) ITEM NO : 9 Providing leather finished polishing to Kota / Marble / Shahabad Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. SSR Item No : 33.57 ) (PMC Bhavan ) Unique No (15525) Rate List Year (2024-2025) ITEM NO : 10 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR Item No : 21.38 ) (PMC Bhavan ) Unique No (15233) Rate List Year (2024-2025) ITEM NO : 11 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( SSR Item No : 24.04 ) (PMC Bhavan ) Unique No (15309) Rate List Year (2024-2025) ITEM NO : 12 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( SSR Item No : 25.50 ) (PMC Bhavan ) Unique No (15327) Rate List Year (2024-2025) ITEM NO : 13 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( SSR Item No : 25.31 ) (PMC Bhavan ) Unique No (15322) Rate List Year (2024-2025) ITEM NO : 14 Providing first class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering etc. Complete. ( SSR Item No : 27.02 ) (PMC Bhavan ) Unique No (15371) Rate List Year (2024-2025) ITEM NO : 15 Providing uncoursed rubble masonry of trap / granite / quartzite gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. SSR Item No : 28.01 ) (PMC Bhavan ) Unique No (15385) Rate List Year (2024-2025) ITEM NO : 16 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. SSR Item No : 32.17 ) (PMC Bhavan ) Unique No (15449) Rate List Year (2024-2025) ITEM NO : 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound 1Kilogramper cement bag curing the same for not less than days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1: finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR Item No : 32.11 ) (PMC Bhavan ) Unique No (15444) Rate List Year (2024-2025) ITEM NO : 18 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR Item No : 23.02 ) (PMC Bhavan ) Unique No (15298) Rate List Year (2024-2025) ITEM NO : 19 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. SSR Item No : 23.07 ) (PMC Bhavan ) Unique No (15303) Rate List Year (2024-2025) ITEM NO : 20 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( SSR Item No : 26.33 ) (PMC Bhavan ) Unique No (15352) Rate List Year (2024-2025) ITEM NO : 21 Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. ( SSR Item No : 42.37 ) (PMC Bhavan ) Unique No (15889) Rate List Year (2024-2025) ITEM NO : 22 Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super Pillar tap with flange including all accessories etc complete ( SSR Item No : 43.41 ) (PMC Bhavan ) Unique No (15981) Rate List Year (2024-2025) ITEM NO : 23 Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super bib tap with flange including all accessories etc complete ( SSR Item No : 43.35 ) (PMC Bhavan ) Unique No (15975) Rate List Year (2024-2025) ITEM NO : 24 Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( SSR Item No : 41.10 ) (PMC Bhavan ) Unique No (15792) Rate List Year (2024-2025) ITEM NO : 25 Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( SSR Item No : 41.11 ) (PMC Bhavan ) Unique No (15793) Rate List Year (2024-2025) ITEM NO : 26 Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kilogram/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR Item No : 41.12 ) (PMC Bhavan ) Unique No (15794) Rate List Year (2024-2025) ITEM NO : 27 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR Item No : 42.55 ) (PMC Bhavan ) Unique No (15907) Rate List Year (2024-2025) ITEM NO : 28 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR Item No : 42.56 ) (PMC Bhavan ) Unique No (15908) Rate List Year (2024-2025) ITEM NO : 29 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR Item No : 42.57 ) (PMC Bhavan ) Unique No (15909) Rate List Year (2024-2025) ITEM NO : 30 Building (Bd-V : Water supply and sanitory fittings)P.V.C. flexible Waste Pipe 32 mm dia SSR Item No : 49.V-74 ) (PMC Bhavan ) Unique No (17745) Rate List Year (2024-2025) ITEM NO : 31 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR Item No : 33.34 ) (PMC Bhavan ) Unique No (15502) Rate List Year (2024-2025) ITEM NO : 32 Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish ( SSR Item No : 33.32 ) (PMC Bhavan ) Unique No (15500) Rate List Year (2024-2025) ITEM NO : 33 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover 75Kilogramwith lid and frame fixed in cement concrete. ( SSR Item No : 42.11 ) (PMC Bhavan ) Unique No (15863) Rate List Year (2024-2025) ITEM NO : 34 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete. ( SSR Item No : 42.10 ) (PMC Bhavan ) Unique No (15862) Rate List Year (2024-2025) ITEM NO : 35 Providing and erecting chain link fencing 1.6 M. height with G. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/ with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. ( SSR Item No : 46.39 ) (PMC Bhavan ) Unique No (16044) Rate List Year (2024-2025) ITEM NO : 36 Building (Bd-W : Water supply and sanitory fittings)Concentina Coil Wire ( SSR Item No : 49.W-09 ) (PMC Bhavan ) Unique No (18065) Rate List Year (2024-2025) ITEM NO : 37 Building (Bd-V : Water supply and sanitory fittings)Plastic Bucket ( SSR Item No : 49.V-101 ) (PMC Bhavan ) Unique No (17772) Rate List Year (2024-2025) ITEM NO : 38 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. ( SSR Item No : 41.63 ) (PMC Bhavan ) Unique No (15838) Rate List Year (2024-2025) ITEM NO : 39 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. ( SSR Item No : 42.30 ) (PMC Bhavan ) Unique No (15882) Rate List Year (2024-2025) ITEM NO : 40 Flat back urinal-providing and fixing flat back urinal without flushing tank but including bracket for fixing urinals,inlet pipe,32mm dia pvc flush pipe and stop tap ,filling the gaps with white cement etc complete ( SSR Item No : 61.04 ) (PMC Bhavan ) Unique No (16484) Rate List Year (2024-2025) ITEM NO : 41 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. ( SSR Item No : 42.20 ) (PMC Bhavan ) Unique No (15872) Rate List Year (2024-2025) ITEM NO : 42 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. ( SSR Item No : 42.67 ) (PMC Bhavan ) Unique No (15919) Rate List Year (2024-2025) ITEM NO : 43 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ( SSR Item No : 39.9 ) (PMC Bhavan ) Unique No (15683) Rate List Year (2024-2025) ITEM NO : 44 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters SSR Item No : 42.53 ) (PMC Bhavan ) Unique No (15905) Rate List Year (2024-2025) ITEM NO : 45 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR Item No : 33.25 ) (PMC Bhavan ) Unique No (15493) Rate List Year (2024-2025) ITEM NO : 46 Providing and laying Vitrified mirror/glossy finish having decorative type of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc . complete. SSR Item No : 33.58 ) (PMC Bhavan ) Unique No (15526) Rate List Year (2024-2025) ITEM NO : 47 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track sect ion 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. SSR Item No : 39.37 ) (PMC Bhavan ) Unique No (15711) Rate List Year (2024-2025) ITEM NO : 48 Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. ( SSR Item No : 36.03 ) (PMC Bhavan ) Unique No (15579) Rate List Year (2024-2025) ITEM NO : 49 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 18 prior approval of Superintending Engineer will be necessary ( SSR Item No : 35.26 ) (PMC Bhavan ) Unique No (15576) Rate List Year (2024-2025) ITEM NO : 50 Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. ( SSR Item No : 35.09 ) (PMC Bhavan ) Unique No (15560) Rate List Year (2024-2025) ITEM NO : 51 Providing and applying French polish for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed ( SSR Item No : 34.05 ) (PMC Bhavan ) Unique No (15545) Rate List Year (2024-2025) ITEM NO : 52 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. ( SSR Item No : 34.09 ) (PMC Bhavan ) Unique No (15549) Rate List Year (2024-2025) ITEM NO : 53 Providing & fixing WOODEN FINISH/STONE Finish CEMENT PLASTER having Cement Mortar of 1:3 proportion with thickness 20 to 40 mm for wall, columns & beams, slab bottom/top or any surface. Rate includes Cement plaster of proportion 1:4 of wooden effect, after required curing, proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including cement, Sand, chemical, adhesive, chikenmesh, paint, polish, paper, etc. all material, labor, scaffolding, etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. SSR Item No : 1 ) (PMC Garden ) Unique No (19717) Rate List Year (2024-2025) ITEM NO : 54 PAINTING OF EXISTING WOODEN FINISH TEXTURED SURFACE at all heights including scaffolding etc. complete. Rate includes proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including cement, Sand, chemical, adhesive, chikenmesh, primer, paint, polish, paper, etc. all material, labor, scaffolding, etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. SSR Item No : 4 ) (PMC Garden ) Unique No (19720) Rate List Year (2024-2025) ITEM NO : 55 Providing & fixing BAMBOO FINISH RAILING IN CEMENT MORTOR of 1:3 proportion with appropriate thickness resembling bamboo of diameter 2½ to 3 inch. Railing clear Height 1.0m with underground support of minimum 0.45m depth of 1:1.5:3 ratio concrete of size 0.3 x 0.3 x 0.6m. vertical supports should be at min. 1.0 m intervals & with 10mm Tor steel 2nos in each horizontal member & 3nos in each vertical member. Railing will have two horizontal & two diagonal members in each panel. All external surfaces will have bamboo finish. Rate includes proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including cement, Sand, chemical, adhesive, chikenmesh, primer, paint, polish, paper, etc. all material, labor, scaffolding, etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. SSR Item No : 14 ) (PMC Garden ) Unique No (19730) Rate List Year (2024-2025) ITEM NO : 56 PROVIDING and laying Natural River Sand in Play Area or required locations in Gardens, as per the instructions given by the Engineer Incharge, inclusive of material, Labour, Transportation, , etc all complete. ( SSR Item No : 10 ) (PMC Garden ) Unique No (19726) Rate List Year (2024-2025) ITEM NO : 57 Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. ( SSR Item No : 31.11 ) (PMC Bhavan ) Unique No (15428) Rate List Year (2024-2025) ITEM NO : 58 Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. ( SSR Item No : 33.08 ) (PMC Bhavan ) Unique No (15476) Rate List Year (2024-2025) ITEM NO : 59 Providing Grouring by specially prepared grout of approved make Sq.m chemical with cement in proportion 135 (1 part chemical & 3.5 part cement by weight) along wih 50 ml super plasticizer non cracking antrwash high strength polymer cement grout PC grout available in bags or equivalent with proper water for injectable consistency and applying it in the body of structure like slab, beam, column, pillars, deckslab, retaining wall, basement, underground and elevated water storage reservoir concrete and brick wall, crack portion of structure etc. by injectng method, to achieve its original strength including drilling of suitable diameter drills holes at 2 to 4 Nos. per sqm. using caps and nozzle grouting machinery necessary, scaffolding, finishing and covering gurantee of 10 years on court stamp paper of Rs. 100/-and necessary testing etc. complete (Prior permission of S.E. in writing is necessary before inclusion of this item in estimate) ( SSR Item No : 52.28 ) (PMC Bhavan ) Unique No (16301) Rate List Year (2024-2025) ITEM NO : 60 Providing and laying yellow jaisalmare 25mm to 30mm thick and required width wide in plain/diamond pattern ona bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc.complete. ( SSR Item No : 60.13 ) (PMC Bhavan ) Unique No (16474) Rate List Year (2024-2025) ITEM NO : 61 Building (Bd-V : Water supply and sanitory fittings)Brass nozzle pillar tap 12mm ( SSR Item No : 49.V-146 ) (PMC Bhavan ) Unique No (17817) Rate List Year (2024-2025)
Contract Date: May 19, 2026 Contract Value : 27.25 Lakh
Local Bodies No of Bidders 7
Maharashtra View Result →
21.
Water Resources and Irrigation #11105148 Price Bid
Tender for Repairs To Ats Panel Along With Providing And Fitting Of New Aluminum Cable For 400 Kva Transformer At Lis Mandli. , Repairs/Replacement Of Parts Of Ats Panel Of 170 Hp Motor Of Unit No.2 At Lis Mandli. Disconnecting All The Electrical Connections. Repair To The Ats Of 170 Hp Motor By Way Of Draining Of The Existing/Old T-Oil From The Tank And Storing It In Barrel. Dismantling Of All The Burnt/Damaged Parts Of Starter And providing and Fixing Of New Parts I.E Contact Points (Fixed And Moving). Repairs To Its Moving Mechanism By providing and Fixing Of Sleeve To The Moving Rod. Reassembling All The Parts Of The Starter. Complete Rewinding Of The Coils And Lowering It In The Tank. Giving Heat Treatment To The Old T-Oil To Remove Moisture Content In It. Filling The Demoisturized T- Oil In The Tank Along With 30 Ltrs Fresh T-Oil. Making All The Electric Connections. Testing The Starter On No Load And Then On Full Load.Dismantling Of The Existing Damaged Cable By Way Of Replacing Of The Damaged/Worn Out Old Cables And Providing & Fitting Of 400 Sq.Mm Single Core Aluminium Conductor Pvc Sheathed Cable For 400Kva Transformer, Including Providing And Fixing Suitable Aluminium Lugs, Glands And Jointing Materials, Complete In All Respects For A Total Length Of 45Metres, Ensuring Uninterrupted Power Supply To Lis Mandli. Disconnecting The Power Supply Followed By The Complete Dismantling Of The Oil Circuit Breaker (Ocb) Unit Within The Lift Irrigation Pump House. The Job Includes Checking All Fixed And Moving Contact Assemblies For Pitting Or Erosion, Repairs/Providing And Fitting Of New Contact Assemblies To Ensure Minimal Contact Resistance. Cleaning And Checking The Integrity Of The annual rate contract Control Devices To Ensure They Can Effectively Quench The annual rate contract During The Trip. The Job Includes Servicing Of The Operating Mechanism, Including Spring Linkage And Moving Parts By Way Of Degreasing, Lubrication And Testing. The Job Further Includes The Replacement Of All Minor Insulation Parts. Giving Heat Treatment To The Existing T-Oil To Remove Moisture Content In It & Filling The Demoisturized T- Oil In The Tank Along With 10 Ltrs Fresh T-Oil, Followed By Testing The Breaker On No Load And Then On Full Load. Disconnecting The Electrical Supply To Pumping Unit No.1(10 Cusecs) And Then Decoupling Of Pump & Motor (200 Hp) From The Base Frame. Carriage & Shifting Of Dismantled Motor To Roadside Using Manual Labour And Then To Workshop By Carriage Vehicle.Further The Job Involves Extraction Of Rotor From Stator Followed By Cleaning Of Stator And Rotor Using Compressed Air, Organic Solvent, Ccl4 Etc. To Remove The Dust Particles /Silt Etc. Replacement Of Damaged/Broken Wedges, F-Class Insulation Paper Etc Wherever Required. Extraction Of Bearings From Their Housings And Cleaning By Kerosene Oil And Removing Silt/Dirt From Bearings. Varnishing The Rotor And Stator With Dr.Beck Compound Or Equivalent Make Of Varnish In Two Coats, Drying By Hot Air Process. Thereafter Checking The Ir Value Using Megger Meter. Refitting Bearings In Housings, Greasing Properly And Shifting Back Of Motor After Carrying Out The Repair To Site, Re-Assembling The Motor And Pump, Re-Installing The Same On Their Original Position At Lis Mandli. The Job Also Includes Servicing/Desilting Of Foot Valves At Lis Mandli Of Unit Nos.1,2&3 By Way Of Decoupling The Foot Valves By Cutting/Unfastening The Nuts And Bolts From Suction Pipes. Extraction Of Foot Valves Out Of Sump With Help Of Manual Labour. Dismantling Of Foot Valves After Unfastening/Cutting The Nuts & Bolts. Cleaning Of Foot Valves By Removing Mud And Silt. Then Checking The Discs For Proper Alignment And Balance To Fit In The Seats For No Leakage Of Water. Assembling The Foot Valves And providing and Fixing Of New Rubber Packing Sheets, Nuts And Bolts Etc. Lowering The Foot Valves In The Sump & Coupling With Suction Pipes By Providing New Rubber Packing Sheets, Nuts Bolts And Washers. Checking For Leakages. Complete Job Includes The Cost Of The Material, To & Fro Transportation Charges(Mechanical Carriage & Head Load) Of The Material, Skilled/Unskilled Labour Charges , Hiring Of Tools And Tackles Etc. Complete Job. Note:- The Firm Should Offer Rebate On Old Material/Parts. The Tenderers Are Requested To Visit The Site And Quote The Rate As Per Site Conditions. Any Modifications/ Alterations Of The Job, Absolutely Necessary If Required At The Time Of Execution May Be Done As Per Actual Site Conditions. , Rebate On Old Parts
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
22.
Defence #11104420 AOC
Tender For Repairs / Re-Novation Of Ofti And Ofti Work Shop Buildings Inside Factory Area At Ofmk.; 1 Site clearence 2 FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site 3 GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 mm and not exceeding 150 mm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site. 4 Demolition of cement concrete of any description and in any position not otherwise specifically provided for.Complete all as specified directed. 5 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. Complete all as specified directed. 6 Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified directed. 7 Dismantling floor,heartor wall tiling including cement mortar bedding but nor baking removing serviceable tiles to stores and rubbish off the premises.Complete all as specified directed and directed. 8 Taking down : Taking downcement or cement lime plaster, any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. 9 Removing building materials etc.other than spoilupto a distance of 1.0 Km, including loading, unloading and stacking at the destination. 10 Brick work with sub class ‘B’ bricks straight or curved in plan with 1:6 cement mortar.Complete all as specified and directed. 11 Stone Masonry : Walling of Squared Rubble regular coursed Stonemasonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed. 12 Damp proof course to horizontal or vertical surfaces In cement concrete 1:2:4, type B-0, 40 mm thickincluding necessary formwork . 13 Flush Pointing with 1:4 cement mortar to square rubble, coursed, well bonded and solidly hearted built in cement mortar as directed. 14 Vitrified tiles : Supply and laying of Light shade vitrified tiles 10 mm thick (Square/Rectangle) polished , area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Floor tile finishglossy/mat/ antiskid will be as decided by EIC. Complete all as specified and directed . Make : Johnson, Orient bell, AGL as approved by EIC. 15 GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed. 16 FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell 17 SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed. 18 Plastering : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed. 19 Rounding to edges of stone slabs / granite one edge,such as in steps, cooking platform, and other similar situations. Complete all as specified and directed. 20 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc. complete as directed by EIC. 21 Taking down wooden wall panelling of any description and similar work as directed. 22 Snap grid : Supply and fixing of 605x605 mm snap gridGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediatechannel with connecting clips across the intermediatechannel at 457 mm centre to centre. Complete all as specifiedand directed, Make : Armstrong 23 Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 24 POP ceiling : Providing 10 mm thick plaster of Paris(gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mmwith 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately). Complete all as specifiedand directed, Make : Armstrong 25 Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate boardof siliceous and calcareous material reinforced with cellulose fibre / PVC laminated gypsum tiles with MPL film on rear side, 8 mm thk.for fixing in 600 mm x 600mm grid,Make: Gyproc/ La gyp 26 Door shutter repair : Taking down door shutter of any description exc. 1 sqm and not exc. 2 sqmand repairing and adjusting to the required size including fixing builders hard ware and refixing to the same opening. complete all as specified and directed. 27 Dismantlingof structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed. 28 UPVC window / Ventelator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete all as specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, 29 UPVC window : Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drillingof holes for fixing hardwares and drainage of wateretc. After fixing frame the gap between frame andadjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified anddirected by Engineer-in-Charge. 30 UPVC door : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proofS.S. wire mesh (Two nos. glazed & one no. wire meshpanels) made of (big series) frame 116 x 45 mm & sash46 x 82 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazingbead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVCchambered frame, with in-built roller track and sashextruded profiles duly reinforced with 1.60 + 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionuPVC extruded glazing beads, uPVC extrudedinterlock and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extremepanels along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zincalloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, including drilling ofholes for fixing hardwares and drainage of water etc.After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof siliconsealent over backer rod of required size and ofapproved quality, complete all as specified anddirectd. 31 steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed 32 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 33 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.8 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 34 Wooden Wall panelling : S & F of Prelaminated particle board18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. Complete as specified and directed at site. 35 Wooden panelling frame work : S&F of battens frame work using wooden clean sawn 2nd class soft wood battens of cross sectional area exc. 15 & not exc. 25 sq.cm at a spacing of 35 centres. Complete as specified and directed at site. 36 PCC paving : PCC 1:4:8 in floors/ pavingoftype D-2, 1:4:8 with 40mm graded aggregate,100 mm thick.Complete all as specified and directed. 37 Earth work in excavation in all kind of soils by mechanical means (Hydraulic excavator) means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge 38 Soling (or sub base) of spread thickness 150 mm with broken boulders or quarried stone, inter sticesfilled, surface formed and rolled and consolidated torequired gradient and camber. Complete all as specified and directed. 39 Hard core with broken stone/boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed. 40 Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed 41 Stone sett flooring (M&L) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 42 Edge stones to flooring (M&L) with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep and and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 43 PCC paving : PCC 1:2:4 in floors/ pavingoftype B-2, with 40mm graded aggregate, 100 mm thick. Including finishing concrete surface even and smooth surface without using extra cement.Complete all as specified and directed. 44 Wearproof topping 20 mm thick using CC 1:2:4, as specified incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner). Complete all as specified and directed. 45 Supply of metalic floor hardener 46 Surface excavation not exceeding 30 cm deepand averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed 47 PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. oftype B-1, 1:2:4 (20 mm graded aggregate) 48 Smoth finish : Finishing cement concrete surface even and smooth using extra cement. 49 CC Paver blocks : S&F of Machine pressed precastconcrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement & pigment (Coloured)Complete all as specified and directed. 50 CC chequered tiles :S&F of cement concrete chequered tiles with grey pigment cement and pigments(Coloured tiles) for pavements. size of tile 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.Complete all as specified and directed. 51 PCC paving : PCC 1:3:6 in floors/ pavingof type C-2, with 40mm graded aggregate, 100 mm thick.Complete all as specified and directed. 52 Forming 12mm thick Expansion joints for 100 thick slabsfilled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A. ’ Complete all as specified and directed. 53 Structural steel (S&F) : Structural steel work confirming to Fe-410 W (Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including application of one coat of Zinc chromate primer paint .Make:TATA, Jindal 54 Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed. 55 Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed. 56 Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI basedcorrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed. 57 Supply only of liquid water proofing compound for incorporating concrete.Make. Fosrac, BASF, SIKA 58 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating. complete as specified and directed. 59 Kerb stone : Providing precast cement concrete using Type-B1, 1:2:4 20 mm graded aggregatein window or doorcills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets,etc. with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4. Complete with joints to match . Complete all as specified and directed. 60 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in roofkerbs or mud stops, rounded orchamfered on edges.complete as specified and directed. 61 PCC : Plain Cement Concrete (1:2:4) Type B2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed . 62 RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed. 63 REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. . 64 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 65 SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade A, including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 66 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 150 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 67 SWG PIPE : Supply & fixing of 150 mm dia Salt Glazed Stoneware drain pipeslaid in trenches including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 68 Earth work in excavation of all kind of soils by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Complete all as specified and directed . 69 Returning, filling in of excavated soils, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. 70 PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 71 PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 72 Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit iring, etc., and making good, cutting not exc 10 cm girth. Complete all as specified and directed. 73 Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces. Complete all as specified and directed. 74 S & F ofG.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 75 S & F ofG.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 76 S & F ofG.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches. 77 Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex 78 BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed. 79 NAHANI TRAPS : Supply & Fixing ofCI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4complete all as specified and directed at site. 80 GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified. 81 GRATING : Supply and fixing of grating doom 100 mm dia. of PTMT (min. weight 25 gms) 82 PVC D/E PIPE CONNECTION :Supply and fixing of PVC Double End Pipe connection.in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed. 83 ALUMINIUMPARTITIONS : Supply and fixing complete of anodised aluminium powder coated frames for partition frames and windows etc. all complete as directed by E.I.C. 84 ALUMINIUM WINDOW SHUTTERS : Supply and fixing complete of anodised aluminiumwindow and ventilator shutters powder coated fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary jointig cleats, glazing clips, rubber neoprane packing, handles 2 nos. in each door, hinges, anodised aluminiumsnap beading, screws etc. complete all as directed by E.I.C. 85 HINGES : Supply and fixing of extruded Al. alloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-21 of size 125mmincluding all as specified and directed . 86 Antique aldrop : Supply and fixing of 200 mm long Antique model Brass mixed heavy alloy, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.All as specified and directed and as approved by EIC. 87 Brass hinge: Supply and fixing of extruded brassalloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-11 of size 125mmincluding.All as specified and directed and as approved by EIC.. 88 Antique tower bolt : Supply and fixing of Antique model Brass mixed heavy alloy, barrel tower bolts of extruded section of size 200 mm and fixed all as directed.All as specified and directed and as approved by EIC. 89 Antique Door handle : Supply & fixing of Extruded Antique model Brass mixed heavy alloy, cast type polished bright handles 150 mm long, Complete all as specified and directed 90 TOWER BOLT : Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm and fixed all as directed. 91 BOW HANDLE: Supply & fixing of Extruded aluminium alloy handles 150 mm long, fabricated type, anodised. Complete all as specified and directed 92 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be easured separately), removing materials to store for keeping in safe custody for reuse at site and making good. 93 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) 94 point wiring:S&F / Drawing of cables in PVC pipe,OneLight point or onefan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FR PVC single core sheathed cable 95 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 5 amps independent, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 96 point wiring: S&F /Drawing of cables to One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 97 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 15 amps independent, with cables 4.0 sq.mm size of copper conductor cables FR PVC sheathed. 98 S & F of ceiling rose,3 phase/PVC/Polycorbonate, Isolate body 99 S & F ofswitch modular type of one module, 6 amps 100 S & F ofsocket, 2/3 pin combined, 6 amps, 2 Module 101 S & F ofswitch modular type of one module, 16 amps 102 S & F ofsocket, 2/3 pin combined, 16 amps, 2 Module 103 S & F ofFan step regulator 120 W, 2 Module 104 LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix 105 S & F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. 106 S & F of LED tube lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 107 LED Street Light :Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/Halonix.complete all as specified and directed 108 Exhaust Fan: Supplyand Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding ofsweep 250mm.complete all as specified and directed. 109 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 110 Industrial socket plug: Supply and fixing of 240 V, 20 amps, single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB. 111 MCB :Supply and fixing of MCB / Isolator, 240 V, single pole 40 amp 112 MCB :Supply and fixing of MCB / Isolator, 240 V, double pole 40 amp 113 MCB D.B : S & F of Sheet Metal enclousers for D.B ofsingle doorof SPN,8 way with 200A rated bus bar,240V 114 MCCB: Suppply and fixing of MCCB 3 pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA. 115 S & F of Modular metal flush box 6 module 116 S & F of Modular white cover plate with frame 3 module 117 S & F of Modular white cover plate with frame 4 module 118 S & F of Modular white cover plate with frame 6 module 119 S & F of Modular white cover plate with frame 8 module 120 EARTHING : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and directed 121 Earth continuity conductor : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip. complete all as specified and directed 122 Dismantlng ofAsbestos cement (corrugated,semi corrugated, etc.) sheets in roofcoverings. Sheets shall be deposited to stores as directed. 123 Cutting or uprooting grass on old CC/brick tiles or on old mud phuska,and Taking down old Taf felt and loose material from the roof, cleaning the bitumen surface by wire brushing, washing down & disposing the pealed off tar felt muck etc. for complete as directed. removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. Complete as specified and directed. 124 Surface painting : Removal of old tarfelt sheets,Wire brushing and cleaning top surface of roof tops and surface painting, with a layer of bitumen primer for bitumen membrane @ 0.50 ltr/sqm by the same membrane manufacturere of density at 25° C, 0.87-0.89 Kg/ltr and viscosity 70-160 cps and then left the surface 4 to 8 hours for drying.Complete as specified and directed. 125 Bitumen Tack coat / Seal coat : Applying surface bitumen coat Seal / Tack coatwith lndustrial bitumen 85/25 forwaterproofingtreatments at the rate of 1.2 kg / sqm . 126 Water proofing treatment (M&L) : Rendering water proofing treatment to RCC roof slabs including vertical surfaces with APP based polymetric membrane sheet, minimum 3 kg/sqm and minimum 3.0 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) evenly laid on primed surfaces by forced applicationby torch on treatment. The vital physical and chemical parameters of the membrane shall be : Tensile strength in longitudinal and transverse direction at 23° C as 650/450/5 cm.Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150° C. Cold flexibility shall be up to 2° c when tested in accordance with ASTM, D-5147. The laying of membrane shall be done through the authorised applicator of the manufacturer of membrane. Membrane make : STP / Dr. Fixt / IWL as approved by EIC. 127 Carrying and disposal of debris : Removing building materials etc. to a distance of 1.5 KM or under including loading, unloading and stacking at the destination. Complete all as specified and directed at site. 128 Rolling shutter : S&F ofSteel rolling shutters 1.25 mm thickness of lathe, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle. Complete all as specified and directed. 129 Rough excavation notexceeding1.5 m deepin drains etc in loose/soft soils andgetting out 130 Scarifying : Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc.400 sqm and the thickness Exc 50 mm and n.exc 100 mm deep 131 Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 132 Macadam : Premix bituminous, macadam with paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less).Complete all as specified and directed. 133 Pot holes : Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadamusing paving bitumen, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings,6.3 mmsizeand again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.Complete all as specified and directed. 134 Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 135 Applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5kg per 10 sq metre. Complete as specifiedand directed. 136 Bituminous premixed carpet, 2.5 cm consolidated thickness, with 0.34 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen)per 10 sq.m and mixed in mechanical hot mix plant and laid with mechanical paver and rolled using power roller 8-10 T capacity and compacted to required camber and gradient to uniform smooth surface. Complete as specifiedand directed. 137 Supply and fixing of Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete. 138 Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint and application of priming paint plaster coat. 139 Rendering synthetic enamel painting on new Steel surfacesof any description over 10 cm width or girth- TWO coats including one coat of red oxide Zinc chrome paint. Make: Asian paints/Berger 140 Complete removal existing treatment of of white washing onsurfaces of walls/ concrete. 141 Complete removal existing treatment of of white washing on surfaces of ceilings. 142 CHALK WHITENING : M&L - Chalk whitening (white cement-based, water-resistant, white wall putty) of plastered surfaces as preparatory to distempering on wall surfaces, Make : Birla wall care, complete all as specified & directed. 143 PRIMER : Priming plastered and other surfaces with alkali resistant priming paint. Make : Asion/Dulux- all as specified and directed . 144 WHITEWASH ON CEILINGS : M&L - White washing on ceilings- on old decorated surfaces- including preparation of surfaces – ONE coat of White Wash-complete all as directed. 145 WHITEWASH ON WALLS : M&L - White washing on Walls – on old decorated surfaces- including preparation of surfaces - TWO coats of White wash - complete all as directed. 146 PLASTIC EMULSION PAINT:Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint-complete all as directed. Make: Asian -Apcolite / Dulux-promise. 147 OBD : M&L - Rendering Oil Bound Distempering on old surfaces -including preparation of surfaces on walls - TWO Coats of OBD - complete all as directed. Make : Asian-tractor Uno / Berger-Butterfly / Indigo-gold. 148 External weather proof painting on walls : Material & Labour for applying Two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces. all as specified and directed, Brand : Asian apex,Berger weather shield, Nerolac Rain coat. 149 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting onOld painted Steel surfaces- surfaces of any description over 10 cm width or girth including preparation of surfaces-TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 150 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on Old painted Steel surfaces- surfaces of any description n.exc 10 cm width or girth including preparation of surfaces- TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 151 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on wooden surfaces - old surfaces of any description over 10 cm width or girth including preparation of surface - TWOCoats- all as specified and directed-Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 152 FRENCH POLISHING : French polishing on old surfaces of any description, width or girth –including cleaning and preparing the surface- One or more coats. all as specified and directed. Make : Sheenlac, sealer 153 Supply and fixing of Safety lever locks mild steel with 4 levers for rolling shutters as directed. 154 Fan Hook: Supply and Fixing of Fan hook with double anchor bolt complete fixing as per instructions of EIC. 155 IWC : IWC of approved make fixed with P trap Make: Hindware/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 156 CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware(Prime)/ Cera(Fountain). Complete all as specified and directed. 157 MIRROR : Mirror 5 mm thk. with bevelled edge fixed with concealed screws Make: Saint Gobain/ Nilkamal/ Casa Gold. Complete all as specified and directed. 158 Switch board box with frame plate and cover plate , metal flush box18 module: Supply and Fixing of covering plates with Metal Flush box andcover plate frames of 18 module of make Legrand/ Schneider/ Havellscomplete all as specified by the EIC 159 Concertina coil & 6 straight RBT strands : Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina cross type fencing, GI steel plate & GI core wireon wall top using concertina coils stretched to approx.6 meters length at site and clipped with three nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as C clips, R.B.T clips etc.). Including additional three horizontal R.B.T strands to be fixed with vertical portion of MS angle supports as directed in site. Complete all as specified and directed at site. 160 Accoustic sheets : supply and fixing of choice colourPolyester Fiber Acoustic Board / tiles, Thickness: 12mm, for insula-tion and accoustic purposes, 60x60 cm in size, fixed to wall / ceiling surfaces on snap grid orwith nails to timber frame work or with Z bar/clips etc as specified by manufacturer.Complete all as specified and directed. 161 Floor mat: supply and fixing of choice colourNylon carpet for floors minimum 6 mm thicknesshaving better accoustic co-efficient ,fixed to floor with approved adhesiveas specified by manufacturer.Complete all as specified and directed. 162 ACP wall lining : Supply and fixing of decorative choice colour solid finished Aluminum composit panel 4.0 mm thick sheeting on external wall surfaces upto 12.0 mter heights fixed over aluminium/MS framed wall surfaces as specified by manufacturer. Cost includes ACP panel, frame work, jointing glue and scafolding etc. Complete all as specified and directed. 163 UPVC window (Single glazed panel shutter & fixed wire mesh panel): Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)frame 47 x 50 mm & sash 47 x 68 mm both havingwall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area ofwindow upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel sectionmade from roll forming process of required length(shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension,EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixingframe to finished wall, plastic packers, plastic capsand necessary stainless steel screws etc. Including SS wire mesh panel with aluminium beeding fixed to outer face window using adjustable /removable clips. Profile offrame & sash shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be alsofusion welded including drilling of holes for fixinghardwares and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof siliconsealant over backer rod of required size and ofapproved quality, complete all as specified anddirected by Engineer-in-Charge. 164 WALL TILES : Supply & fixing of Coloured digital glazed ceramic tiles in vertical surface 300x600 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell. 165 PVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 11100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed. 166 PVC door shutter : S & F of Factory Made Solid WPVCDoor Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour. 167 Staircase railing : Supply and fixing of designed Stainless steel hand railing not less than 0.8 mtr height for stairs, balconies etc. using SS grade 304/316 members for balusters & rails etc. and covered with 12 mm thick tampered toughned glass. Design & model shall be as decided by EIC. Cost inclusive of glass, design and other mountings. Complete all as specified and directed. 168 Handicap grab bar : S&F of stainless steel anti slip vertical swing handicap bath room grab bar/rail with paper holder of min. 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 169 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 170 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 0.45 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 171 Wood Door : Supply and fixing of modern & designer soildTeakwood door shutters for Main Doors 32 mm finished thickness as decided by EIC . 172 EWC : Supply and fixing ofItalian Collection ceramic Floor Mount Western Commode, Rim less, One-piece for Bathrooms with Syphonic vortex Flushing system and soft closing seat cover including connection pipe.Make : Jaquar Fusion, Hindware Fabio, Cera cinova 173 WASH BASIN : Supply and fixing of Under counter Wash basin rectangle of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make : Jaquar(Continental)/ Cera(campa)/ Parryware(Aqiline). Complete all as specified and directed. 174 URINAL : Supply and fixing ofSensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 175 PILLAR COCK : S&F ofsensorbased table top model Pillar cock with auto closing system of make: Jaquar / Hindware/ Cera. Complete all as specified and directed. 176 CONCEALED STOP COCK : S&F of CP Concealed stop cock of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 177 2 WAY ANGLE COCK : S&F ofCP 2 way angle cock Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed. 178 EWC JET FAUCET : S&F of EWC jet faucet of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 179 BIB COCK : S&F ofCP Bib cock of make: Jaquar(Solo)/Parrywaare(Uno)/ Cera(Fountain). Complete all as specified and directed. 180 SOAP DISH : S&F of SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 181 Hand drier: Supply and fixing of plastic Automatic Hot air drierfor bath rooms of approved make. Make :Orchid / Dolphy / Bajaj. Complete all as specified and directed. 182 Liquid soap dispensar: Supply and fixing of Liquid soap dispensar for bath rooms of approved make. Make :Jaquar / Orchid / Dolphy. Complete all as specified and directed. 183 Toilet paper holder: Supply and fixing of stainless steel single toilet paper roll holder of approved make. Make :Jaquar continental / Parryware sigma/ Cera Icon. Complete all as specified and directed. 184 Urinal partition : Supply and fixing of HPL (High-Pressure Laminate) urinal partitions using 12 mm thick compact board of width 400 to 500 mm and height 1200 mm of approved make and fixing with stainless steel brackts. Complete all as specified and directed. 185 Bldg.Expansion joint : Preparation of joint by grinding of groove surfae, remoal of dust, providing polymer mixed cement mortar on both sidea of groove and crack filling if any in floor level, fixing of baker rod 25x25 mm to control depth of groove, Providing and applying Nitoseal PU50 of Fosroc or equivalant having MAF 25% or above to the groove 25x12 mm. Including fixing / covering of joint with APP based polymetric membrane sheet sufficient width. Complete all as specified and directed at site. 186 Forming V grooves on granite surfacesn,exc 10mmdeep and n exc 10mm on face in steps, cooking platform, and other similar situations etc. 187 Hiring / Engage of JCB for cleaning, moving and loading materials like sand, gravel, or demolitionand removal of debris and other miscellaneous purposes as directd. The rate includes diesel and driver required to run the vehicle. 188 Carpet grass : Supplly and laying of carpet grass on levelled soil surface including preparing the soil bedby loosning the base ground 100 mm thick and removing old unwanted grass if any and necessary watering as directed. 189 Supply and laying of red earth / soil in loose state which is free from debris, grass and other vegitation to be used for gardening purposes as directed. 190 Architectural design : Before commencement of work Contractor should take architectural consultancy servies for entrance arch at the entrance gate, building front elevations and garden designs by authorised institutions / authorised Designer. Complete all as directed by EIC
Contract Date: May 16, 2026 Contract Value : 3.98 Crore
Government Departments No of Bidders 4
23.
Health and Family Welfare #11073758 Technical Bid
Tender For Major Works At Girls Ashram Hostel Merpur Kotda Udaipur- 1 Dismantling Doors, Windows And Clearatory Windws Steel Or Wood Shutter Including Chowkhats And Holdfasts Etc. 2 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meter Lead: For Thickness Of Tiles 10Mm To 25Mm. 3 Dismantling Gi Pipes (External Work) Including Excavation And Refilling Trenches After Taking Out The Pipes And Including Stacking Of Pipes Within 50 Meter Lead: 4 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. 5 Grading Roof For Water Proofing Treatment With Water Proffing Compound. Cement Mortar 1:4 (1Cement : 4 Coarse Sand) 6 Providing & Laying Broken Glazed Titles On Roof ( Broken Glazed Tiles Not Less Than 9 Kg/Sqm) On Top Of Hot Bitumen @ 1.7 Kg/Sqm. (1.40 Kg Of Vg-40 (30/40 )Grade And 0.30 Kg/Sqm. Of Vg-10 (80/100) Grade) And Joints Filled With Cement Mortar 1 :2 (1 Cement:2 Marble Dust Mixed With Water Proofing Compund All Complete As Per Direction Of Engineer-In-Charge. 7 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) 8 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1Cement : 3-Fine Sand) 9 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete.New Plastered Surface (Three Or More Coats) 10 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). 11 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) For Area Of Each Slab From 2001 To 5000 Sq.Cm 12 Kota Stone Slabs 25 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete 13 Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Sqm Frame Is Made Of Pressed Steel Isi Section 80X25 Mmx 1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15X3Mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer In Charge 14 Providing And Fixing In Position Collapsible Steel Shutters With Vertical M.S. Channels 20 X 10 X 2Mm And Bracket With Flat Iron Diagonals 20 X 5Mm. Size With Top And Bottom Rail Of T-Iron 40 X 40 X 6Mm. With 40Mm Dia Steel Pulleys/Ball Bearing Complete With Bolts, Nuts Locking Arrangements Inside And Outside Stoppers, Handles Etc. As Per Specification Including Applying A Priming Coat Of Approved Steel Primer. (To Be Measured And Paid As Per Outer Dimension). 15 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded With 15X3 Mm Lugs 10Cm Long Embedded In Cement Concrete Blocks 15X10X10 Cm Of 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Require Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 16 Providing And Fixing M.S. Sheet 1Mm Thick Dabble Leaf Door Shutter In Angle Iron Frame 35X35X5Mm Suitabilly Diagonally Braced With 25X3Mm Flat Iron Above And Below Lock Rail Of Size 50X5Mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint Add Extra For Double Leaf Shutters. 17 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3Mm With Suitable Screw At Not Exceeding 150Mm Distance. 18 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc. 19 Repair Of Door, Window Shutters Including Cost Of Material And Labour For Change Of Damaged : Aldrop Of Mild Steel 12\ Long X12Mm Dia 20 Steel Hinges For Wooden Chowkhat 4\ Size. 21 Steel Handle 6\ Size 22 Labour Charges For Repair To Door / Window Without Using Any Material Such As Applying Randha (Finishing) Tightening Of Bolts & Screw Etc. 23 Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide Extra If Square,Rectangular Hollow Tubelar Sections Are Used Or Grill Made By Flats Only 24 Providing & Fixing Uv Stabilised Fiberglass Reinforced Plastic Sheet Roofing Upto Any Pitch Including Fixing With Polymer Coated „J‟ Or „L‟ Hooks, Bolts & Nuts 8Mm Dia. G.I Plain/Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out Of 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Voilet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Confoim To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified. 3.0Mm Thick (Wt. 5.0 Kg./Mtr. Sq.) 25 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: 26 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade Including All Scaffolding. New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm ). 27 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 28 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture : 29 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer In Charge In Skiriting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing In White Mixed With Pigment Of Matching Shade Complete. 30 Providing And Laying Ceramic Mat Floor Tiles (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown Of Any Size, Laid On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 31 P & F Indian Type White Glazed Vitreous China 1St Quality W.C. Orissa Pan (Is :2556 Mark) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor: Size 580X440Mm. 32 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1 Metre Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work Exposed On Wall) 15 Mm Nominal Size 33 20Mm Nominal Size 34 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings, This Included Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement , Trenching Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.(External Work).15 Mm Nominal Size 35 20Mm Nominal Size 36 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 75 Mm Dia 37 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 38 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 160 Mm Dia 39 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Coupler (Socket) 160 Mm Dia 40 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Plain Tee 160 Mm Dia 41 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Door Tee 110Mm Dia. 42 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Bend 45. 110Mm Dia. 43 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Bend 45. 160Mm Dia. 44 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Bend 87.5. 110Mm Dia. 45 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Bend 87.5. 160 Mm Dia. 46 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Door Bend (Top Side) 110Mm Dia. 47 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Pipe Clip 110Mm Dia. 48 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. Pipe Clip 160Mm Dia. 49 P & F Pvc Storage Tank Isi Marked (Is : 12701) Indicating The Bis License No), Of Approved Make With Cover, 25Mm Dia 1M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc., Complete Of Approved Design. 1000 Litres Capacity. 50 P & F Full-Way Valve (Is:778 Mark) Or Wheel Valve Of Approved Make. Gun-Metal 15Mm Nominal Bore. 51 P & F Full-Way Valve (Is:778 Mark) Or Wheel Valve Of Approved Make. Gun-Metal 25Mm Nominal Bore. 52 Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick C.C Bed Of 1:5:10, M-15 Grade C.C Floor & Rcc Slab Covering With M15 Grade C.C. Floor, 50 Mm Thick Stone Slab Partition Walls, 20 Mm Thick Plaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Stone Foot Rests Of Approved Design ,Two No. 450 Mm Dia Each Ferro Cement Cover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr:- Size 400 X140X150 Cm.(For 50 Users) With 115 Mm Thick Rcc (M-20) Slab With Tor Steel Reinforcement 10Mm Φ @15 Cm C/C Bothways Including Shuttering Complete In All Respect 53 Size 230 X110 X150 Cm.(For 20 Users) With 115 Mm Thick Rcc (M-20) Slab With Tor Steel Reinforcement 10Mm Φ @15 Cm C/C Bothways Including Shuttering Complete In All Respect. 54 P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall :Size 550 Mm X 400 Mm 55 P & F Looking Mirrors With P.V.C. Frame Of Approved Make As Per Direction Of Engineer-In-Charge Size 500X400Mm 56 P & F Grating Of Approved Quality/Make:Stainless Steel Sheet Size 125Mm Dia. 57 P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: Brass 400 Gm,15Mm Nominal Bore. 58 Construction Of Manhole In All Type Of Soil Inner Size 90 X 60 Cm. 300 Mm Thick Masonry In Cm 1:6, 10 Cm. Thick Cement Concrete 1:5:10 In Foundation, 20 Mm Thick Inside Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring, Making Channels, 80Mm Thick Stone Slab Covering With 40Mm Thick M-15 Grade C.C. Flooring, Cement Cover With Frame Of 450Mm Dia, Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within 50 Mtr. Lead.Depth Up To 0.5 M 59 Construction Of Chamber In All Type Of Soil With 300 Mm Thick Masonry In Cm 1:6 M,10 Cm Thick C.C. 1:5:10 In Foundation, 20Mm Thick Insider Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring , Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.-Do- Size 450 X 450Mm Depth Upto 0.5 M Cement Cover With Frame 60 Construction Of Soakage Well In All Type Of Soil With 300 Mm Thick Dry Masonry, Top And Bottom 300 Mm Course In Cm 1:6, 80Mm Thick Stone Slab, Jointing Of Slab In Cm 1 : 3, Ralthal, Kharanja, 40 Mm Thick M-15 Grade C.C Flooring , Earthwork Complete As Per Approved Drawing Including Disposal Of Earth Within A Lead Of 50 Mtr.: Size 300 Cm. Dia Outside & 300 Cm. Depth . 61 P & F Flush Cock / Flush Valve (Is : 9758 Mark) For Wc Of Approved Quality Make : (-Do-) Half-Turn Exposed 25Mm Nominal Bore. 62 P& F Waste Coulping With Fittings Of Approved Quality /Make: C.P Brass 32 Mm Dia 63 P& F Waste Pipe With All Fitting G.I(B Class) 32Mm 64 Construction Of Open Drain With 112Mm Thick Brick Masonry In Cm 1:4 Semi Circular S.W. Glazed Channel (Confirming To Is Standards) Fixed With Cement Mortar 1:1 Over A Bed Of 100Mm Thick C.C. 1:5:10, Filling Of Edged With M-15 Grade C.C. Flooring, 12Mm Cement Plaster 1:4, Over All Exposed Faces, Excavation & Disposal Of Earth With In A Lead Of 50 Mtr Complete As Per Approved Drawings : 150 Mm Drain,225Mm Av. Depth Width 15 Cm S.W. Glazed Channel. 65 Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden, To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes, But Excluding Cost Of Casing Pipes As Per Is : 2800 (Part I & Ii) 1979 Specifications. The Work Would Be Completed After Obtaining Sand Free Water. The Tube Well Should Have A Throughout Bore As Per Nominal Dia Of Casing Pipe: 150Mm 66 Supply Of Erw M.S. Black Casing Pipe Isi Marked (Is:4270/1992) Of Grade Fe410 Of Following Sizes At Site Of Work. 150 Mm Nominal Bore Of Pipe 67 S & F Tube Well Cover Of M.S.Sheet (6Mm Thick) With Nuts And Bolts Complete For Casing Size: 150Mm Dia 68 S & F M.S. Clamp, Set Of 50 ×6Mm Flat Iron With Nuts And Bolts Etc. For Holding The Riser Pipe Assembly Of Submersible Pump Set. 69 Providing & Fixing Of Hdpe Pipe Confirming To Is:4984:2021 For Water Supply Suitable For Submersible & Jet Pump With Required Fittings Ie Socket, Elbows, Tee Etc. Complete In All Respect. For Vertical Installation 63 Mm Od 6 Kg / Cm2 70 For Horizontal Installation 63 Mm Od 4 Kg/ Cm2 71 Sitc Of Radial / Mixed Flow Water And Anti-Corrosive Liquid Filled Submersible Motor Pump Sets Suitable For 100/150Mm Dia Borewell. The Size Of Adopter Fixed On Top Of The Motor Should Exceed The Top Of Coupler , For Safegaurd The Coupler. The Job Includes Labour Part Of Lowering Of Riser Pipe G.I./ H.D.P.E. With Rope, Cables & Pump, Installation Of Complete Fitting And Accessories, Jointing Of Electrical Cables Up To Starter. All Labour For Testing Of Submersible Pumps Set And Supply Of Water To Water Mains, Complete In All Respect. 100 Mm Diameter Submersible Pump Shall Have Following Hp Rating, Phase, Head Range, Discharge Range Respectively. 3.0 Hp, 1-Ø, (40 -170)Mtr, (60- 20) Lpm Copper Wound 72 Sitc Of Ip 54 Oem Fabricated Dol/Star-Delta Starter Panel With Switchgear Selection As Per Type-2 Coordination Chart And Made Out From 1.6 Mm Thick Powder Coated Crca Sheet, Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection(For Three Phase Pumps), Illuminated On / Off Push Buttons, Ammeter, Voltmeter, Indicating Lamps, 2P/4P Mcb Etc. Suitable For Following Rating Motors Complete In All Respect. For Three Phase Submersible / Mono Block Pump 3.0 Hp To 5.0 Hp ( Dol Starter ) 73 Providing & Laying Of Polypropylene Rope Confirming To Is:5175 For Submersible Pump Of Following Sizes. Complete In All Respect. 20Mm (Suitable For 90 Mm Od Pipe) 74 Supply And Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To(Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From Copper, Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, Existing Pipe / Open Trench / Cable Tray / On Surface Including Making Connection Etc. As Required. 10.0 Sq.Mm 3 Core Flat / Round 75 Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Virgin Material Pvc Conduit & ItS Isi Marked (Is:3419-1988) Accessories, Round Tiles, 1.2 Mm Thick Hot Dipped Galvanized Modular Box With Earth Terminal, 10A Modular Switch,Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Holder /3 Way Connector, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Short Point (Up To 3 Mtr.) 76 Medium Point (Up To 6 Mtr.) 77 Long Point (Up To 10 Mtr..) 78 Wiring Of 3/5 Pin 6 Amp. Light Plug Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade(Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Pvc Conduit & ItS Isi Marked (Is:3419-1988)Accessories, Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earth Terminal, 10 A Modular Switch, 3/5 Pin 6 A Modular Socket, Modular Face Plate With Grid Plate, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr On Board 79 Medium Point (Up To 6 Mtr.) 80 Long Point (Up To 10 Mtr..) 81 Supplying And Fixing Of Power Plug Point With Modular Accessories As Per Pwd Specification For Electrical Works, On Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earthing Terminal/Connector On Surface Or In Recessed With Suitable Size Of Modular Face Place With Grid Plate And Cover Plate Including Cost Of Isi Marked Modular 16 Amp. Switch (Is :3854) And 6/16 Amp. Socket Outlet (Is:1293) Making Connection , Testing , Etc. As Required. For Specification Of Wiring Accessories Refer Chapter E - 07 Related Item & For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 82 Providing & Fixing Of Following Modular Accessories As Per Pwd Specification For Electrical Works, Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Blanking Plate 83 Modular Mcb 6 A To 32 A Dp (Is:8832 Marked) 84 Providing & Fixing Of Modular Type 100W Step Fan Regulator Duly Isi Marked (Is 11037) With Cm/L No. Printed Made Out Of Unbreakable And Fire Retardant Virgin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including Making Connections, Testing Etc As Required. 5 Step Fan Regulator 2 Module 85 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules,Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 1 X 1.5 Sq.Mm 86 2 X 2.5 Sq. Mm. + 1X1.5Sqmm 87 2 X 4.0 Sq. Mm. + 1 X 2.5 Sq. Mm 88 2 X 6.0 Sq. Mm. + 1 X 2.5 Sq. Mm 89 4 X 10.0 Sq.Mm 90 4 X 6.0 Sq.Mm 91 1 X 16.0 Sq.Mm 92 1X 4.0 Sq.Mm. 93 Providing & Fixing Of Recessed/Surface Mounting Heavy Duty Horizontal Type Double Door ( Metal / Glazed )Distribution Board With Metal End Box Made Out From Galvanized Steel / Crca Sheet Not Less Then 1.2 Mm Thick Conforming To Is-8623-1 & 3 / Iec 61439- 1 & 3, Powder Painted Complete With Reversible Door (For Double Door Db Only )100 Amp. Insulated Copper Bus Bar/Shorting Link , Copper Neutral Link, Copper Earth Link , Color Coded Interconnecting Wire Set Of Suitable Rating And Din Bar,Masking Sheet, Making Internal Db Terminations With Copper Lugs, Ferrules, Detachable Gland Plate, Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Glazed Door (Three Phase) Ik-09 And Ip-43 With Metal End Box 6 Way 94 Glazed Door (Single Phase) Ik-09 And Ip-43 With Metal End Box 12 Way (12+2) 95 Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (B/ C/D Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution Board/Sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Single Pole Mcb (With B/C Curve Tripping Characteristics) 6 A To 32 A Rating 96 Double Pole Mcb(With B/C Curve Tripping Characteristics) 40 A Rating 97 Four Pole Mcb(With B/C Curve Tripping Characteristics) 50/63 A Rating 98 S&F Following Sizes Of Isi Marked ( Is:14927 P - Ii ) Upvc Trunking Along With Accessories Like Coupler, Inner, Outer, Elbow, Square Box, Tee, End Cap Etc. On Surface With Screws, Expansion Fasteners Etc. As Required. 32 Mm X 12 Mm 99 Making Of Hole In Wall (Brick/Stone) Of Required And Placing Np-2 Rcc Pipe Ring Of Required Size For Housing Exhaust Fan And Making Good The Same, With Cement Plaster Required Of Following Size. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . Up To 457 Mm Size 100 P & F 1.2Mm Thick M.S. Recessed Fan Box, Hexagonal/ Round Of Size 130 Mm Dia, Depth 75Mm, 12 Mm Dia Rod Fan Hook With 100 Mm Length Extended On Each Side . All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 101 Providing & Fixing Of Heavy Duty Capacitor Start, Copper Wound Double Ball Bearing 900/1400 Rpm Single Phase Exhaust Fan Conforming To Is:2312 Isi Marked In Existing Opening Including Making Connections Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 300 Mm Sweep(900/1400 Rpm) 102 P & F Of Gravity Louver Shutter Of Superior Quality Made Out Of Frame Of 18 Swg M.S. Sheet & Louvers Made From 24 Swg Ms Sheet With Enamel Paint Including Cost Of Nuts, Bolts, Etc As Required. Up To 380 Mm Size 103 Providing & Fixing Of Ip20 Smd Mid Power Led Batten Type Integrated Light Fixture Made From Powder Coated Extruded Aluminium Housing With In Built Driver , System Lumen Efficacy ≥ 110 Lm/Watt Output, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd 80 , Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K / 5700°K /6000°K/6500°K (As Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79 & Lm80) Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 1170Mm(+/-10%) Led Batten With Min. Lumen Output 2200 Lm 104 Providing & Fixing Of Ip-20 Led Recessed / Surface Mounted, Round / Sqaure Smd Mid Power Led Downlight With Power Coated Die-Cast Aluminum Housing With Uv Stabilized Non Yellowish Diffuser With Bis Complience 2.5 Kv Surge Protected Isolated Driver, With Short & Open Circuit Protection, Having Efficiency > 85% . System Lumen Efficacy Of ≥ 110 Lm / Watt, Thd 80, Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79 & Lm80) Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . Surface Mounting (With Extruded Alumn. Housing ) Minimum Lumen Output 1600 Lm 105 Minimum Lumen Output 1950 Lm 106 Sitc Of Ip20, 1X1 Led Surface/ Recessed Mounting Backlit & Smd Mid Power Type Led Light Fixture Not Less Than 35 Mm Housing Depth Made From Crca Sheet Steel Housing, High Purity / Transmisivity Uv Stabilized Non -Yellowish Diffuser For Uniform Light Distribution.Operating Voltage Range 140-285 V, Hv Cutoff - Lv Cutoff Should Be 300-100V High Efficiency With 4 Kv Internal Surge Protection Bis Certified Isolated Driver Having Efficiency > 85% , With Short & Open Circuit Protection (Integral With Light Fixture). System Lumen Efficacy Of ≥ 120 Lm/Watt ,Thd 80 , Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K / 5700°K /6000°K/6500°K (As Per Ansi Bin) As Required. Surface Moutning Minimum Lumen Output 3600 Lm 107 Providing & Fixing Of Bee Star Rated Copper Wounded Double Ball Bearing Capacitor Start, Aluminium Body & Metallic Blade Ceiling Fan Conforming To All The Performance Requirements Laid Down In Is 374:2019 Including All Amendments, As Applicable ; & Carry Bis Licensing (I.E. Isi Marking) With Down Rod Up To 80 Cm With Secondary Support Safety Cable ( Steel Rope) , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 1200 Mm Sweep Bee 1 Star Rated (Service Value >=4.0 To 108 Providing & Fixing Of Extra Down Rod Of 15 Mm Dia . Erw (Electrical Resistance Welded ) Of 1.6Mm Nominal Thick Medium Duty Steel Pipe Including Cutting, Threading, Drilling, Fixing Quarter Pin Etc As Required. 109 Providing & Fixing Of 450 Mm Sweep Oscillating Type Wall Mounting / Pedestal Type Fans With Three Speed, On And Off Position, Sintered Iron Bush Oil Impregnated, With Metal Front And Back 120 Or More Ribs Guard; Three No. Aluminium Blades, Minimum Air Delivery 100 Cum. / Minute , Minimum Service Value 1.11 Cum./Min/Watt, Noise Level Should Be 110 Providing & Fixing Of Of Double Ball Bearing, Copper Wounded Capacitor Start Single Phase Metallic Blade Fresh Air Fan, In Existing Opening Including Cost Of Hardware , Flexible 3 Core 1.5 Sq.Mm Copper Conductor ,Making Connections, Testing Etc. As Required. 300 Mm Sweep 111 Supply And Installation Of High Tensile Low Carbon Steel Rod Molecularly Bonded With 99.9 % Copper Thickness (250 Microns) And Confirming To Ul 467, Is/Iec 62561-2 Of Following Size And Length And As Per Point Mentioned (A), (B), [C), (D), (E) Below :- (A) Bore A Hole Of Dia. 100 Mm Of Required Length, Place The Rod In The Centre Of Hole (B) Filled With Anti Corrosive Conductive Compounds With The Permanent Sealings At Both The Ends, Cpri/ Erda Tested With Rms Capacity Of Minimum 30 Ka For Withstanding 1 Second .To Ensure The Moisture Content And Electrical Conductivity, 25 Kg For 2000 Mm & 50 Kgs For 3000Mm Of Resistance Lowering Earth Enhancement Material Shall Be Used As A Backfill Compound. The Compound Shall Be Tested Form Nabl Acredeated Lab For Low Resistivity ( Less Than 0.12 Ohm - Meter ) & High Conductivity In Nature With Carbon As A Major Content As Per Referance Of Is 3043-1987,Ieee 80-2013 (Clause 14.5D) , Ieee 837 & Ier 1956 With Latest Amendemnts © Connect The Rod With Copper Strip/Conductor/Wire With Suitable Clamp Made From Tinned Copper And Ss 304 Bolt (D) Place Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height 250 To 300 Mm. (D) Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book. (E) Test Certificates For Confirming Above Standards From Oem Is Mandatory. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 17.2 Mm Thick And 3 Mtr. Long 112 Supply & Laying Following Size Earth Wire In Horizontal Or Vertical Run In Ground/Surface/Recess Including Riveting, Soldering, Saddles, Making Connection With Gi/Cu Purity Purity >95% Thimble Etc. As Required. 8 Swg Copper Wire 113 Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (Uv Stablization Report Submitted For Uv Cover ) /Toughened Glass Cover And Secondary Lens On Each Led/ Integrated Lens Diffuser & Should Be High Power Led Of 3 To 5 Watt Each . The System Efficacy >=125 Lm/ Wt And Integrated Metal Case Potted Driver & Has A Unique Bis R Number ( As Per Is 15885) With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac & Low Voltage Cutoff @>=90 V Ac And Auto Resetting Safety , Power Factor >0.95 Driver Efficiency >85% ,Thd(I) 70 And Cct 5700K +355K. Surge Protection Shall Be Min ≥ 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs As Required. Led Street Light Fixture With Minimum Lumen Output 2500 Lm 114 Providing & Fixing Of Street Light Bracket Made Out From Following Size Of B Class , Medium Class G.I. Pipe Confirming To Is : 1239 P - 1 ( 2004 ) With Heavy Duty Pole Clamp, Saddles Suitable Fastners Etc. As Required. 32 Mm Dia. 115 Supply & Fixing Of Dry Powder Agent (As Per Is 4308:2019), Abc Type Fire Extinguisher (Stored Pressure Type) Conforming To Is:15683:2018 , Powder Coated Internal & External Surface Deep Drawn Cylinder Body Of Mild Steel Cr2 Grade Conforming To Is: 513, Squeeze Grip Forged Brass Release Valve With Inbuilt Safety Release Device, Diaphragm Type, 0 To 28 Bar Range Pressure Gauge, 450 Mm Long Epdm Discharge Tube, Qr Code For Product Traceability Including Fixing On Wall With Suitable Anchor Fasteners As Required Of Following Capacity. Test Certificates Of All The Parameters Along With Hydro Test & Burst Test (For Cylinder Body) Certificate From Oem / External Nabl Accrediated Lab Is To Be Submitted. 6 Kg 116 Sitc Of Ro Water System With Filteration Stages = Particilate Filter- Membrane Life Enhancer Filter- Sediment Filter- Pre Carbon Filter- Ro Membrane Filter- Post Carbon Filter. Input Power Rating -230V Ac, 50Hz, Percentage Of Rejection Tds-90% Or Better, Having Following Features (A) Double Purification By Ro With Ess Or Latest Technology With Tds Indicator. (B) Spin Welded Ro Membrane Housing To Prevent Tempering. (C) Push Fit Component For Leak Proof Performance. (D) Fully Automatic Operation With Auto Start And Auto Off. (E) Ss/Abs Construction For Corrosion Free Lifespan. (F) Equally Suitable For Water From All Borewells, Overhead Storage Tanks, Water Tankers And Even Municipal Taps. (G) Ro Membrane Flushing - Auto Flush@ Every Start, Every Stop And Every One Hour Of Working For One Minute, Complete In All Respect With Following Capacity. Purification Capacity - 50Lph, Duty Cycle 270-500 Liters/Day 117 Supply , Installation, Testing And Comissioning Of Is:1475 Marked Self Contained Drinking Water Cooler With Hermetically Sealed Compressor,Non Cfc Refrigerent Suitable For Operation On 230V/1Ph/50Hz Ac Supply,Full Stainless Steel (Ss304)Body (0.8 Mm Thick) And Tank (0.5 Mm Thick) , Stainless Steel Water Tray,Minimum Two Nos Brass Chrome Plated Faucets And Suitable Drainage System Complete In All Respect With Required Height Ms Fabricated And Painted Angle Iron Frame ( Cost Of Frame To Be Paid Extra )Complete In All Respect Of The Following Capacity. Cooling Capacity 150 Ltr./Hr. And Storage Capacity 150 Ltrs 118 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means Over Areas (Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50M And Lift Upto 1.5 M , Disposed Earth To Be Levelled And Neatly Dressed : All Kinds Of Soil 119 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). 120 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M15 Grade Nominal Mix 1: 2: 4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size). 121 Kerb Stones Of 1200X300X150, 1000X450X150, 1000X600X150, 600X300X150 Size (M-30) Providing And Laying Cement Concrete Kerb Stones Of Different Sizes In M-30 Grade (Manufactured With Fully Mechanised Dry Cast Process With Forced Action Mixer Whose Arms Revolve Along The Main Axis And Rotate About Its Own Axis Also, Having Humidity Sensor For Moisture Control Of W/C Ratio In Concrete Mix. Manufactured With Steel Moulds (Milled And Manufactured In Csi Diamond Or Csi Nitro Process For Accuracy) On Steel Base Plate Of Min 16 Mm Thick; Having Vibration And Pressing Action Both Together With The Help Of Multiple Synchronised Vibrators. Power Of Hydraulic Station Should Be Minimum 50Kw For Compaction And Cured In Controlled Chambers Having Humidity Control And Automated Air Circulation System) In Position To The Required Line, Level And Curvature Jointed With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Making Of Joints, Drainage Opening Wherever Required. 122 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means Over Areas (Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50M And Lift Upto 1.5 M , Disposed Earth To Be Levelled And Neatly Dressed : All Kinds Of Soil 123 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). 124 Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 125 Providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement. M20 Grade Nominal Mix / Design Mix 126 Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers (If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcement For Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc.M20 Grade Nominal Mix / Design Mix 127 Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation , Footings, Strap Beam, Raft , Bases Of Columns Etc. 128 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For : Columns, Pillars, Posts And Struts Etc. 129 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. Thermo-Mechanically Treated Bars (Conforming Of Relevent Is Code) 130 Random Rubble Stone Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Five Level Above 30Cm. Thick Walls In : Cement Mortar 1:6 ( 1-Cement : 6-Sand). 131 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish : 25 Mm Thick. 132 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade Including All Scaffolding. New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm ). 133 Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide Extra If Square,Rectangular Hollow Tubelar Sections Are Used Or Grill Made By Flats Only 134 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 135 Providing And Laying Cement Concrete Including Curing, Compaction Etc. Complete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Levelling Course Etc Up To Floor Five Level Excluding The Cost Of Centering And Shuttering. M15 Grade Nominal Mix 1: 2: 4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size).
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
24.
Health and Family Welfare #11053902 Technical Bid
Tender For Drugs And Consumables , Drugs And Consumables , Oxygen (Medicinal Gas) Inhalation , Oxygen(Medicinal Gas) Inhalation Should Be Certified For Medical Use Contains Not Less Than 99% V/V Of Oxygen, Contains Not More Than 5Ppm V/V Of Carbanmonooxide, Contains Not More Then 30Ppm V/V Of Carban Dioxide Should Be Free Of Halogens, Oxidising Substances & Water. , Halothane Inhalation 250 Ml Bottle , Ketamine (As Hydrochloride) Injection 50 Mg /Ml,10 Ml Vial , Nitrous Oxide Inhalation , Thiopentone Injection Powder 0.5 G , Propofol Injection 1% Vial (10 Mg/Ml , 10 Ml Vial) , Isoflurane Inhalation 100 Ml Vial , Sevoflurane Inhalation 250 Ml , Bupivacaine Injection 0.5%, 5Ml Amp. , Bupivaccine Heavy 5 Mg With Dextrose Monohydrate 80 Mg/Ml Injection 4 Ml Ampoule , Lignocaine Injection 2%, 30 Ml Vial , Lignocaine Jelly 2% W/V ( With Seprate Nosal), 30Gm Tube , Lignocaine Hydrochloride And Adrenaline Bitartarate Injection 20Mg/Ml And 0.01Mg/Ml Adrenaline, 30 Ml Vial , Atropine Injection 0.6 Mg/Ml, 1 Ml Ampoule , Glycopyrolate Injection 0.2 Mg/Ml, 1 Ml Ampoule , Diazepam Injection 5 Mg/Ml, 2 Ml Ampoule , Diazepam Tablet 5 Mg , Midazolam Injection 1 Mg/Ml, 5 Ml Vial , Midazolam Nasal Spray 1.25 Mg/Spray , Diclofenac Supositories 50 Mg , Diclofenac Sodium Gastro-Resistant Tablet 50 Mg , Diclofenac (Sodium) Injection 25 Mg/Ml ,3Ml Amp. , Diclofenac Gel 1%, 30 Gm Tube , Diclofenac + Paracetamol Tablet 50Mg+325Mg , Ibuprofen Tablet 200Mg , Ibuprofen Tablet 400 Mg , Ibuprofen Suspension 100 Mg/5 Ml. 60 Ml Bottle , Paracetamol Tablet 500 Mg , Paracetamol Injection 150 Mg/Ml, 2 Ml Amp. , Paracetamol Peaditric 125Mg/5Ml 60 Ml Bottle , Paracetamol Paediatric Oral Suspension 150Mg/Ml, 10 Ml Vial With Marked Dropper , Paracetamol Infusion 100 Mg/10 Ml, 100 Ml Bottle Ffs Technology - , Aceclofenac Tablet 100 Mg , Etoricoxilb Tablet 90 Mg , Morphine Injection 10 Mg/Ml, 1 Ml Ampoule , Morphine Tablet 20 Mg , Tramadol Capsule 50 Mg , Tramadol Injection 50 Mg/Ml, 2 Ml Ampoule , Tramadol Hydrochloride Capsule 100 Mg , Pentazocine Injection 30 Mg/ Ml, 1 Ml Ampoule , Fentanyl Injection 50 Mcg/Ml, 2Ml Ampoule , Pethidine Injection 50 Mg/Ml, 1Ml Ampoule , Thiocolchicoside Capsule 4 Mg , Midazolam Nasal Spray 1.25 Mg/Spray , Beclofen Tablet 10 Mg Tablet , Allopurinol Tablet 100 Mg , Sulfasalazine Tablet 500 Mg , Methotrexate Tablet 2.5 Mg , Methotrexate Tablet 5 Mg , Naxproxen (500Mg)+ Domperidone (10Mg) Tablet , Diacerein 50 Mg + Glucosamine Sulphate 750 Mg Tablet - , Cetrizine Syrup 5 Mg/5Ml, 60 Ml , Chlorpheniramine Tablet 4 Mg , Pheniramine Maleate Injection 22.75 Mg/Ml, 2 Ml , Hydroxyzine Tablet 10 Mg , Dexamethasone Tablet 0.5 Mg , Dexamethasone Injection 4Mg/Ml, 2 Ml Ampoule , Hydrocortisone ( Sodium Sucinate Powder) Injection 100 Mg Vial, With 2 Ml Distilled Water For Reconstitution , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Methyl Prednisolone Injection 1Gm, 1 Gm Vial With Diluent , Adrenaline Injection 1 Mg/Ml, 1:1000, 1 Ml Annual Periodical Maintenance , Levocetrizine Tablet 5 Mg , Nor Adernaline Injection 4Mg/Ml , Cyproheptadine Tablet 4 Mg , Monteleukast Tablet 5 Mg , Methyl Prednisolone Tablet 8 Mg , Antisnake Venom ( Dry Powder For Polyvalent Solution) Injection Vial With 10 Ml Diluent , Calcium Gluconate Injection 100 Mg/Ml, 10 Ml Annual Periodical Maintenance , Naloxone Injection 400 Mcg/Ml, 1Ml Ampoule , Pralidoxime (Pam) Injection 1 Gm Vial , Activated Charcoal Tablet 500 Mg , Carbamazepine Tablet 200 Mg , Carbamazepine Tablet 400 Mg , Carbamazepine Oral Solution 100Mg/5Ml, 30 Ml Bottle , Lorazepam Tablet 1 Mg , Lorazepam Tablet 2 Mg , Lorazepam Injection 4Mg, 2Ml , Magnesium Sulphate Injection 1 Gm /2Ml (50%W/V), 2 Ml Ampoule , Magnesium Sulphate Injection 2.5 Gm /5Ml(50%W/V), 5 Ml Ampoule , Phenobarbitone Tablet 30 Mg , Phenobarbitone Tablet 60 Mg , Phenobarbitone Injection 200 Mg/ Ml , Phenobarbitone Oral Solution 20 Mg/ 5 Ml,60 Ml Bottle , Phenytoin Tablet 100 Mg , Phenytoin Tablet 300 Mg , Phenytoin Oral Solution 25 Mg/Ml, 100 Ml Glass Bottle , Phenytoin (Sodium) Injection 100Mg, 2Ml Amp. , Sodium Valproate/Valproic Acid Enteric Coated Tablet 200 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 500 Mg , Sodium Valproate/Valproic Acid (Sodium)Controlled Released Tablet 300 Mg , Sodium Valproate Injection 100 Mg/Ml , Sodium Valproate Suspension 200 Mg/5 Ml, 100 Ml , Clobazam Capsule 10 Mg , Divalproex Sodium Tablet 500 Mg , Levetiracetam Tablet 500 Mg , Toperamate Tablet 50 Mg , Injection Levetricatum 100 Mg, 3 Ml - , Levitiracetam Oral Solution , Levitiracetam Oral Solution, 100Mg/Ml, 100Ml Bottle , Albendazole Chewable Tablet 400 Mg , Albendazole Oral Suspension 200 Mg/5 Ml,10 Ml Bottle , Levamasole Tablet 50 Mg , Levamasole Tablet 150 Mg , Amoxicillin Capsule 250 Mg , Amoxicillin Capsule 500 Mg , Amoxicillin Oral Suspension 125 Mg/5 Ml, 60 Ml Bottle , Amoxicillin + Pottasium Clavulanate Tablet 500 Mg + 125 Mg , Amoxicillin + Pottasium Clavulanate Dispersible Tablet 200 Mg +28.5 Mg , Amoxicillin + Clavulanic Acid Injection 1.2 Gm , 10 Ml Vial With Diluents , Amoxicillin + Clavulanic Acid Injection 250 Mg +50 Mg, Vial With Diluents , Ampicillin Sodium Injection 500Mg 2 Ml Vial With Diluent , Cefixime Tablet 200 Mg , Cefixime Oral Suspension 50 Mg/ 5 Ml, 30 Ml Bottle , Cefadroxil Oral Suspension 125 Mg/ 5Ml, 30 Ml Bottle , Cefotaxime Injection 250 Mg , Cefotaxime Injection 500 Mg 5 Ml Vial With Diluent , Cefotaxime Sodium Injection 1 Gm 10 Ml Vial With Diluent , Ceftriaxone Injection 250 Mg 2 Ml Vial With Diluent , Ceftriaxone Injection 1 G, 10 Ml Vial With Diluents , Benzathine Penicillin Injection Powder 12 Lacs Iu , Vial With Diluent , Cefoperazone + Sulbactam (1G+1G) Injection , Immipenum Injection 500 Mg , Imipenem And Cilastatin Injection (500 Mg+500 Mg) , Cefazolin Injection 1 Gm , Amikacin Injection 250Mg/ Ml, 2 Ml Vial , Amikacin Injection 50 Mg/ Ml, 2 Ml Vial , Gentamycin Injection 40 Mg/ Ml, 2 Ml Ampoule , Azithromycin Tablet 250 Mg , Azithromycin Tablet 500 Mg , Azithromycin Oral Suspension 40 Mg/Ml , 15 Ml Bottle , Levofloxacin Tablet 500 Mg , Ofloxacin Tablet 200 Mg , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Ciprofloxacin Injection 2Mg/Ml, 100 Ml Bottle For Infusion Ffs Technology , Doxycycline Capsules 100 Mg , Cotrimoxazole (Sulfamethoxazole + Trimethoprim) Tablet 800 Mg + 160 Mg , Co-Trimoxazole [Sulphamethoxazole (A) + Trimethoprim (B)] Oral Liquid 200 Mg (A) + 40 Mg (B)/5 Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Metronidazole I.V Infusion 5 Mg/Ml, 100 Ml Bottle For Infusion (Ffs Technology) , Metronidazole Suspension 200Mg/5Ml , 60 Ml Bottle , Cloxacillin Capsule 500 Mg , Nitrofurantoin Capsule 100 Mg , Vancomycin Injection 500 Mg , Linezolid Tablet 600 Mg , Norfloxacin Tablet 400 Mg , Fluconazole Tablet 150Mg 10*10 , Fluconazole Tablet 200 Mg 10*10 , Griseofulvin Tablet 250 Mg , Itraconazole Capsules 200 Mg , Amphotericin B Powder For Injection 50 Mg And Vial Has Sodium Deoxychlolate Or Liposomal Complex , Terbinafine Tablet 250 Mg , Acyclovir Tablet 200 Mg , Acyclovir Tablet 400 Mg , Acyclovir Tablet 800 Mg , Tinidazole Tablet 500 Mg , Ivermectin Tablet 6 Mg , Diethyl Carbamazine Tablet 100Mg , Flunarazine Tablet 10 Mg , Propranolol Tablet (Sr) 40 Mg , Propranol Tablet 20 Mg , Levodopa + Carbidopa Tablet 100 Mg + 10 Mg , Trihexyphenidyl Tablet 2 Mg , Bromocriptine Tablet 2.5 Mg , Ferrous Sulpahte + Folic Acid Syrup 100 Mg + 0.5 Mg/ 5 Ml In A Flavoured Base/Vehicle 50 Ml Bottle, Ropp Cap Bottle With Inert Liner & Bottle To Be Provided With A Dispenser To Dispense To 1 Ml, 1.5Ml And 2 Ml Each Time And Packed In A Mono Carton Note:- For Detailed Specifications Kindly See Below Attached Copy. , Elemental Iron 60 Mg +Folic Acid 500 Mcg, Sugar Coated And Red Color Tablet , Ferrous (Iron Sucrose) Injection 20 Mg/Ml , Folic Acid Tablet 5Mg , Hydroxycobalamin Injection 1 Mg/ Ml , Warfarin (Sodium) Tablet 2 Mg , Heparin Injection 1% , Enoxaprin Sodium Injection 60 Mg In Pfs , Phytomenadion Injection 1 Mg/0.5 Ml Water Based Single Dose Ampoule , Plasma Volume Expander Injection ( Each 100 Ml Contains Polygeline, Polypeptides Of Degaraded Gelatin, Cross Linked Via Urea Bridges 3.5 G ( Equivalent To 0.63 G Of Nitrogen) Nacl Ip 0.85 G, Kcl Ip 0.038 G Cacl2 Ip 0.070G Water For Injection Ip Q.S Electrolytes In M.Mol/Litre, 500 Ml Ffs , Glyceryl Trinitrate (Sublingual) Tablet 500 Micrograms , Glyceryl Trinitrate ( Niroglycerine) Injection 5 Mg/Ml, 5 Ml Ampule , Isosorbide Mononitrate Tablet 30 Mg (Sr) , Isosorbide Dinitrate Tablet (Sublingual) 5 Mg , Metoprolol Tablet 25 Mg , Metoprolol Tablet (Sr) 50 Mg , Carvediolol Tablet 3.125 Mg , Adenosine Injection 3 Mg/ Ml, 1 Ml Ampoule , Diltiazem Injection 5 Mg/Ml , Diltizem Hydrochloride Tablet 30 Mg (Modified Release), 10*10 , Amiodarone Tablet 100 Mg , Verapamil Tablet 40 Mg , Amiodarone Injection 150 Mg/ 3 Ml , Atenolol Tablet 50 Mg , Amlodipine Tablet 5 Mg , Amlodipine Tablet 10 Mg , Methyldopa Tablet 250 Mg , Methyldopa Tablet 500 Mg , Nifedipine Capsule(Sublingual) 5 Mg , Nifedipine Tablet Ip Sr/Er 10 Mg , Ramipril Tablet 5 Mg , Labetalol Tablet 100 Mg , Labetolol Injection 5Mg/Ml, 4Ml Amp. , Telmisartan Tablet 40 Mg , Telmisartan Tablet 80 Mg , Losartan + Hydrochlorothiazide Tablet (50 Mg + 12.5 Mg) , Olmesartan 20 Mg + Amlodipine 5 Mg + Hydrochlorothiazide 12.5 Tablet , Clinidipine Tablet 20 Mg , Hydrochlorthiazide Tablet 12.5 Mg , Chlorthalidone Tablet 6.25 Mg , Nebivalol Tablet 5 Mg , Enalapril Tablet 5 Mg , Dobutamine Injection 250Mg/5Ml , Dopamine Injection 40 Mg/ Ml In 5Ml Ampoule , Digoxin Tablet 0.25 Mg , Acetylsalicylic Acid Tablet 150 Mg , Acetylsalicylic Acid Tablet 75 Mg Gastro-Resistant (Enteric Coated/ Delayed Release) , Clopidogrel Tablet 75 Mg , Streptokinase Injection Powder 1500000 Iu , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 20 Mg , Rosuvastatin 10 Mg+ Fenofibrates 160 Mg Tablet , Tranexamic Acid Tablet 500 Mg , Tranexamic Acid Injection In Water For Injection 100 Mg/Ml, 5 Ml Ampoule , Mephentermine Injection 30 Mg/Ml, 1 Ml Amp. , Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet , Citicoline Tablet 500 Mg , Clotrimazole Pessaries 200 Mg , Clotrimazole Cream 2% W/W, 15 Gm , Clotrimazole Mouth Paint 1% W/V In Propylene Glycone Glycerian Base 15 Ml , Sertaconazole Cream 2% W/W, 15 Gm , Ketaconazole Lotion 2% W/V, 50 Ml , Acyclovir Eye Ointment 3% , 4.5 Gm Tube , Clindamycin Gel 1% W/W, 10Gm Tube , Clobetasol 0.05% + Gentamycin 0.1% Ointment 15 Gm Tube , Silver Sulfadiazine Cream 1%, 30 Gm Tube , Framycetin Cream 1%, 30 Gm Tube , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 50 Ml Dark Bottle , Benzoyl Per Oxide Gel 2.5%, 20 Gm Tube , Permethrin Lotion 5%, 50 Ml , Permethrin Cream 5%, 30 Gm , Betamethasone Dipropionate Cream 0.1% W/W , 5 Gm , Fluticasone Cream 0.01 % 10Gm , Calamine Lotion Ip-Calamine Ip-15% W/V, Zinc Oxide Ip-5%W/V,Glycerin Ip-5% W/V ,65Ml Bottle , Benzyl Benzoate 25% Lotion 100 Ml , Podophylline Resin Topical Solution 25% , 10 Ml Bottle , Fusidic Acid Cream 2%, 10Gm Tube , Coal Tar Solution 5% W/V, 100 Ml Bottle , Salicylic Acid Ointment 6%, 15 Gm Tube , White Petrolatum Jelly 100 %, 50 Gm Jar , Clotriamazole 1%+ Beclomethasone Dipropionate 0.025% Lotion 15 Ml , Mometasone Furoate Cream 0.1 % W/W , Mometasone Furoate Cream 0.1 % W/W, 10Gm Tube , Hydroquinone 2.0% W/W + Tretinoin 0.025% W/W + Mometasone Furoate 0.1% W/W In A Cream Base Q.S , Kojic Acid Cream 2 % , Hydroquinone 2%/4% + Tretinoin 0.025 % +Fluocinolone Skin Cream , Hydroquinone 4%+ Tretinoin 0.05% +Fluocinolone 0.01 % Skin Cream, 15Gm , Tacrolimus Ointment 0.03% W/W, 10 Gm , Tacrolimus Ointment 0.1% 10Gm Tube , Choline Salicylate Solution Bp Equivalent To Choline Salicylate 8.7 % W/W, Benzalkonium Chloride Solution Ip 0.01 % W/W, Lignocaine Hydrochloride Ip 2.0 % W/W Gel Base Q.S., 10 Ml Packing , Sunscreen Lotion Spf 26 ,100Ml Bottle , Clobetasone Butyrate(0.05 W/W + Miconazole(2.0 W/W) ,15 Gm Cream - , Halobetasol Propionate(0.5% W/W + Salicylic Acid (3% W/W) , 10Gm Ointment , Minoxidil Solution 5%, 60Ml Bottle , Gamma Benzene Hexachloride 1% Lotion,100 Ml , Sertaconazole Nitrate 2 % W/W+ Beclomethasone Dipropionate 0.025% W/W, 15Gm Tube , Cotrimazole 1%+ Beclomethasone Dipropionate 0.0025% Lotion 15 Ml Lotion 1%, 0.0025%, 15Ml , Mupirocin Cream 2% W/W,5Gm Tube , Isotretinoin Capsule 20 Mg , Methoxsalen Tablet 10 Mg , Triamcinolone Injection 20 Mg/ Ml , Triamcinolone Injection 40 Mg/Ml , Povidone Iodine Solution 5% ,500 Ml , Povidone Iodine Ointment 5%,15 Gm , Povidone Iodine Scrub (Povidone Iodine Cleansing Solution 7.5 %, W/V With Foaming Agent) 500 Ml , Povidine Iodine Scrub 7.5% W/V, 500Ml , Hydrogen Peroxide Solution 6%, 400 Ml Bottle , Cetrimide Solution 20% Concrete For Dilution, 500 Ml Plastic Bottle , Chlorhexidine Solution 5% Concrete For Dilution, 500 Ml , Bleaching Powder Containg Not Less Then 30% W/W Of Avialble Chlorine, 1Kg/25 Kg , Feracrylum 1% W/W Sterile Solution 100Ml Bottle , Feracrylum 3% W/W Gel , 15Gm Tube , Tritium Vulgare Extract And Phenoxyethanol Cream,32Gm Tube , Glutraldehyde Solution 2% - 2.5%, 1 Litre Pack , Potassium Permanganate Crystal For Solution 100 Gm , Bleaching Powder Containg Not Less Then 30% W/W Of Available Chlorine Powder - , Furosemide Tablet 40 Mg , Furosemide Injection 10 Mg/Ml, 2Ml Ampoule , Mannitol Intravenous Infusion 20% W/V, 100Ml Ffs Technology , Spironolactone Tablet 25 Mg , Torasemide Tablet 10 Mg , Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg Tablet , Disodium Hydrogen Citrate Oral Solution/Syrup 1.38 -1.45 Gm/ 5 Ml, 100 Ml Bottle , Sodium Bicarbonate Infusion 7.5% W/V, 10 Ml Ampoule , Alkalizer Mb6 500Ml (Potassium Citrate Magnisum Citrate Syrup & Vit B6) , Bethanecholchloride Tablet 25 Mg , Darifenacin Tablet 7.5 Mg , Silodosin Tablet/Capsule 8.0 Mg , Mirabegron Tablet 50 Mg , Pyridium Tablet 200 Mg , Aluminium Hydroxide 240 Mg + Magnesium Hydroxide 100Mg+ Simethicone 25 Mg + Magnesium Carbonate 60 Mg Chewable Tablet , Dried Aluminium Hydroxide Gel + Magnesium Hydroxide + Simethicone Oral Suspension 250 Mg+ 250 Mg+ 50 Mg/ 5 Ml, 170 Ml Bottle , Ranitidine Injection 25 Mg/Ml, 2 Ml Annual Periodical Maintenance , Ranitidine Syrup 150 Mg/10 Ml , Ranitidine Tablet 150 Mg, Film Coated , Omeprazole Capsule 20 Mg , Pantoprazole Injection 40 Mg, Vial With 10 Ml Diluent , Pantoprazole + Domperidone Special Repair (40Mg+30Mg) Capsule , Sucralfate 1Gm With Oxetacain 10Mg/10Ml Suspension , Simethicone Syrup 40Mg,60 Ml Bottle , Domperidone Tablet 10 Mg , Domperidone Suspension 1 Mg/Ml, 30 Ml Bottle , Cinnarizine Tablet 25 Mg , Metoclopramide Tablet 10 Mg , Metoclopramide Injection 5 Mg/Ml, 2 Ml Ampoule , Ondansetron Tablet 8 Mg , Ondansetron Injection 2Mg/Ml ,2Ml Ampoule , Ondansetron Oral Liquid 2 Mg/ 5 Ml , Ondansetron Oral Liquid 2Mg/5 Ml , 30 Ml Bottle , Promethazine Injection 25 Mg/Ml, 2 Ml Annual Periodical Maintenance , Promethazine (Hydrochloride) Elixir Or Syrup 5 Mg/5 Ml, 60 Ml Bottle , Doxylamine Tablet 10 Mg , Prochlorperazine Mouth Dissolving Tablet Flavored Base 5Mg , Anti-Haemorrhoidal Containing: Beclomethasone Dipropionate 0.025% W/W, Phenylephrine Hyderochloride 0.10% W/W, Lignocaine Hydrochloride 2.5% W/W In Soft Paraffin Base 20 Gm Tube , Dicyclomine Tablet 10 Mg , Dicyclomine Oral Solution 10Mg/5Ml , Mephenamic Acid + Dicyclomine Tablet 500 Mg +20 Mg , Drotaverine Tablet 80 Mg , Drotaverine Injection 40 Mg/ 2 Ml , Hyoscine Butyl Bromide Tablet 10 Mg , Hyoscine Butyl Bromide Injection 20 Mg/ Ml, 1 Ml Amp. , Bisacodyl Gastro-Resistant (Enteric Coated/Delayed Release) Tablet 5 Mg , Lactulose Solution 10 Gm/ 15 Ml, 60 Ml Bottle , Ispaghula Granules/ Husk/ Powder 100 Gm , Enema , Dioctyl Sulfosuccinate Sodium Liquid,100 Ml , Magnesium Hydroxide Liquid 100 Ml , Oral Rehydration Salts Powder For 1000 Ml Solution , Oral Rehydration Salts Powder For 200 Ml Solution , Zinc (Sulphate) Dispersible Tablet 20 Mg , Octreotide Injection 100 Mcg/Ml, Single Dose 1 Ml Vial , Levosulpride (Sr) 75 Mg + Rabeprazole (Ec) 20 Mg Capsule , Saccharomyces Boulardii 5 Cfu Sachets , Probiotic Capsule/Syurp (Vizylac/Sporolac) , Probiotic Syrup (Streptococus Faecalis 30 Million, Clostridium Butirium 2 Million,Bacillius Mesentiricus 1 Million,Lactic Acid Bacillus 50 Million) Suspension In 5Ml , Probiotic Capsule (Lactobacillius Blends) , Chymotrypsin+ Trypsin (1:6 ) Tablet 100K Au , Cyproheptadine Hcl Ip-2Mg, Tricholine Citrate-275 Mg, Sorbitol Solution (70%)(Non Crystallising) Ip-2 Gm, 200 Ml Bottle , Erythropoietin Injection 4000 Units/Ml, Single Dose 1 Ml Vial , Insulin (Soluble) Injection 40 Iu/Ml In 10 Ml Vial , Intermediate-Acting Insulin (Nph) Injection 40 Iu/Ml In 10 Ml Vial , Biphasic Isophane Injection 40 I.U/Ml, (30/70), 10 Ml Vial , Lantus Insulin (Insulin Glargine 100 Units/Ml) , Metformin Tablet 500 Mg , Metformin Tablet 1 Gm , Metformin Tablet Special Repair 500Mg , Metformin Tablet Special Repair 1 Gm , Glimipride Tablet 1 Mg , Glimipride Tablet 2 Mg , Teneligliptin Film Coated Tablet 20 Mg , Voglibose 0.3 Mg + Metformin 500Mg+ Glimipride 1 Mg Tablet , Vildagliptin Tablet 50 Mg , Empagliflozin Tablet 10 Mg , Glibenclamide Tablet 5 Mg , Clomifene Citrate Tablet 50 Mg , Medroxyprogesterone Tablet 10 Mg , Norethisterone Tablet 5 Mg , Micronized Progesterone Tablet 200 Mg , Mifepristone Tablet 200 Mg , Mifepristone Tablet 25 Mg , Cabergoline Tablet 0.5 Mg , Dienogest Tablet 2 Mg , α -Hydroxyprogesterone Injection 500 Mg , Hcg 5000 Iu(Human Chorionic Gonadotropin) Injection , Conjugated Estrogen Tablet 0.625 Mg , Ethamsylate Tablet 500 Mg Tablet - , Latrazole Tablet 2.5 Mg , Thyroxine Tablet 50 Mcg , Carbimazole Tablet 5 Mg , Ethinyestradiol Tablet 5 Mcg , Estrogens Cream 0.625 Mg , Ethinylestradiol Tablet (0.03 Mg+ Levonorgestrel (0.15) Tablet 0.03Mg, 0.15 , Copper Bearing Intra-Uterine Device Iucd 380 A & Iucd 375 - , Male Condom - , Non Harmonal Ormeloxifene 30Mg Tablet , Emergency Contraceptive Pill Levonorgestrel Tablet 1.5 Mg , Pregency Testing Kit - , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 150 Mcg/Vial , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 300Mcg/Vial , Injection Recombinant Anti-D Immunoglobulin 300Mcg Vial/Pfs , Anti Rabies Immunoglobulin Injection (Human) 150 Iu/Ml, 2Ml Vial , Hepatitis B Immunoglobulin Injection 1Ml. , Hepatitis B Immunoglobulin Injection 100 Iu, 1 Ml Vial - , Tetanus Toxoid Injection 0.5 Ml Ampoule , Rabies Vaccine Single Dose Rabies Vaccine 2.5 Iu Injection For Human Use Prepared In Chick Embryo/ Vero Cell/ Human Diploid Culture Single Dose With Diluent And Disposable Syringe With Needle , Decaravimab+ Miromavimab Injection (600 Iu) 3 Ml , Atracurium Besylate Injection 10 Mg/ Ml, 2.5 Ml Amp. , Succinyl Choline Injection 50Mg/Ml, 10Ml Vial , Neostigmine Injection 500 Mcg/ Ml, 5 Ml Ampoule , Vecuronium Injection 10 Mg Vial , Ciprofloxacin Eye Drops 0.3%, 10 Ml Plastic Bottle , Ciprofloxacin Opthalmic Ointment 0.3 % 5 Gm Tube , Tobramycin Opthalmic Solution 0.3% W/V, 5Ml , Natamycin Eye Drops 2%, 5 Ml , Acylovir Eye Oint 5%,5 Gm , Povidone Iodine 5% Eye Drops , Prednisolone Sodium Phosphate Eye Drops 1%, 5 Ml , Flurbiprofen Eye Drops 0.03%, 10 Ml Vial , Flouromethalone Eye Drops 0.1 % W/V,5 Ml Vial , Olopatadine 0.1% Eye Drops 5 Ml , Acetazolamide Tablet 250 Mg , Timolol Eye Drops 0.5%, 5Ml , Atropine Drops 1% , Homatropine Eye Drops 1% , Tropicamide + Phenylepherine Eye Drops 0.8% + 5%, 5 Ml Vial , Cyclopentolate Eye Drops 1% W/V , Sodium Carboxymethyl Cellulose Eye Drops 0.5% W/V, 10 Ml , Hydroxypropyl Methylcellulose Injection 2% , 3 Ml Pfs (Glass Syringe) , Hyaluronidase Injection 1500 Iu/Ml , Tryptan Blue Dye 0.06% W/V, 1 Ml Vial , Moxifloxacin Eye Drops 0.5% W/V ,5Ml , Ranibizumab Injection 10Mg/Ml , Travoprost 40 Mg/Ml 2.5Ml Vial Eye Drop , Xylometazoline Nasal Drops 0.05 %, 10 Ml , Xylometazoline Nasal Drops 0.1 %, 10 Ml , Saline Nasal Drops 0.65%, 10 Ml , Wax Dissolving Ear Drops (Paradichlorbenzene 2% W/V, Benzocain 2.7 % W/V, Chlorbutol 5% W/V, Turpentine Oil 15% Ear Drops ), 10 Ml , Clotrimazole 1% W/V + Lignocaine Hydrochloride 2% W/V Ear Drops, 5Ml Bottle , Clotrimazole Ear Drops 5 Ml Vial , Ichthoimol Glycerine Solution 10 Ml Vial , Ciprofloxacin(0.3%)+Dexametasone(0.1%) Ear Drops ,5Ml , Antibacterial & Anti Fungal Ear Drop (Beclomethasone 0.025% W/V +Chloramphenicol 5% W/V +Clotrimazole 1% W/V ,Glycerine Base), 10 Ml Ear Drops , Fluticasone Furoate Nasal Spray , Fluticasone Furoate Nasal Spray 27.5Mcg, 10Ml , Boro-Spirit Ear Drops,3% W/V Ear Drops 10 Ml , Methyl Ergometrine Tablet 125 Mcg , Methyl Ergometrine Injection 200 Mcg In 1 Ml Ampoule , Oxytocin Injection 5 Iu In 1 Ml Ampoule , Carboprost Injection 250 Mcg In 1 Ml Amp./ Vial , Misoprostol Tablet 200 Mcg , Misoprostol Tablet 25 Mg , Dinoprostone Gel 0.5 Mg, 3 Gm , Isoxsuprine Tablet 10 Mg , Isoxsuprine Injection 5 Mg/ Ml,2Ml Ampoule , Valethamate Injection 8 Mg/Ml , Betamethasone Injection 4Mg/Ml , Chlorpromazine (Hydrochloride) Tablet 100 Mg , Fluphenazine Injection 25 Mg, 1 Ml Ampoule , Haloperidol Tablet 5 Mg , Haloperidol Injection 5Mg/1 Ml, 1 Ml Annual Periodical Maintenance , Haloperidol Injection Long Acting 50 Mg , Risperidone Tablet 2 Mg , Risperidone Tablet 4 Mg , Risperidone Injection Long Acting 25 Mg , Quetiapine Tablet 50 Mg , Quetiapine Tablet Special Repair 100 Mg , Aripipralzole Tablet 10 Mg , Aripiprazole Tablet 15 Mg , Aripiprazole Tablet 5 Mg , Olanzapine Tablet 20 Mg , Olanzapine Tablet 10 Mg , Olanzapine Injection 405 Mg , Olanzapine Injection 10 Mg , Olanzapine Injection 210 Mg Long Acting , Olanzapine Injection 300 Mg Long Acting , Clozapine Tablet 100 Mg , Clozapine Tablet 50 Mg , Amitriptyline Tablet 10 Mg , Amitriptyline Tablet 25 Mg , Fluoxetine Capsule 20 Mg , Imipramine Tablet 25 Mg , Sertraline Tablet (Sr) 50 Mg , Sertraline Tablet 100 Mg , Escitalopram Tablet 10 Mg , Paroxetine (Cr) Tablet 25 Mg , Paroxetine Tablet (Cr) 12.5 Mg , Capsule Venalafaxine Extended Release 37.5 Mg , Capsule Venalafaxine Extended Release 75 Mg , Gabapentin + Nortriptyline (400/10Mg) Tablet , Mirtazapine Tablet 15 Mg , Dothiepin Tablet 25 Mg , Lithium Carbonate Tablet 300 Mg , Lithium Tablet 400 Mg Special Repair , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Donepezil Tablet 5 Mg , Donepezil Tablet 10 Mg , Clonazepam Tablet 0.5 Mg , Clonazepam Tablet 1 Mg , Donepezil Injection 10 Mg , Etizolam Tablet 0.50 Mg , Duloxetine Tablet 30 Mg , Bupropion Tablet 150 Mg , Buprinorphine Tablet 2 Mg , Buprinorphine Tablet 0.4 Mg , Disulfiram Tablet 250 Mg , Disulfiram Tablet 500 Mg , Nicotin Chewgum 2 Mg , Nicotin Chewgum 4 Mg , Naltrexone Tablet 50 Mg , Amisulpride Tablet 50 Mg , Pregablin 75Mg +Methylcobalmin 1500Mg +Nortriptylline 10Mg , Methylphenidate Tablet 5 Mg , Memantine Tablet 5 Mg , Tranylcypromine Tablet 5 Mg , Desvenlafaxine Tablet 50 Mg , Buprenorphine Transdermal Patch 10 Mcg/Hour , Buprenorphine Transdermal Patch 20 Mcg/Hour , Lacosamide Tablet 100 Mg , Blonanserin Tablet 4 Mg , Breviteracetam Tablet 50 Mg , Eeg Paste , Agomelatine Tablet 25 Mg , Vortioxetine Tablet 10 Mg , Melatonin Tablet 3 Mg , Tadalafil 10 Mg , Perampenel 2 Mg , Fluvoxamine 150 Mg , Ursodeoxycholic Acid Tablet 300 Mg , Cariprazine Tablet 1.5 Mg , Atomoxitine Capsule 10 Mg , Betahistine Tablet 8 Mg , Lamotrigine Tablet 25 Mg , Salbutamol Tablet 4 Mg , Salbutamol Syrup 2 Mg/5 Ml, 100 Ml Bottle , Salbutamol Inhaler Areosol 100 Microgram/ Dose, Mdi, Single Packing , Salbutamol Nebulizer /Respirator Sol. 2.5Mg, 2.5Ml Respule , Etophylline + Theophylline Tablet 231 Mg + 69 Mg (Sr) , Etophylline + Theophylline Injection 169.4 Mg + 50.6 Mg/2 Ml Ampoule , Budesonide Inhalation 200 Mcg/Dose, 200 Mdi/Dpi , Budesonide Nasal Spray 100 Mcg/Dose, Single Unit , Budesonide Respirator Solution For Use In Nebulizer 1 Mg, 2Ml Respule , Ipratropium Respirator Solution For Use In Nebulizer 250Mcg/ 1Ml, 2 Ml Respule , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg , Aminophylline Injection 25 Mg/ Ml, 10 Ml Ampoule , Budesonide + Formoterol Inhalation (200 Mcg + 6 Mcg), 120 Mdi , Cough Syrup Diphehydramine 14.08 Mg + Ammonium Chloride 138 Mg + Sodium Citrate 57.03Mg + Menthol Ip 1.14 Mg/5 Ml, 100 Ml Bottle 110 Ml Bottle , Cough Syrup Diphehydramine 14.08 Mg + Ammonium Chloride 138 Mg + Sodium Citrate 57.03Mg + Menthol Ip 1.14 Mg/5 Ml, 100 Ml Bottle - , Cough Syrup Ambroxol 15 Mg+ Terbutaline Sulphate 1.25 Mg+ Guaiphenesin 50 Mg+ Menthol 2.5 Mg, 100 Ml Bottle , Doxofylline Tablet 400 Mg , Dextromethorphan (15Mg/5Ml)+Chlorpheniramine Maleate (2Mg/5Ml) +Phenylephrine Hcl (5Mg/Ml) Oral Syrup, 100 Ml Bottle , Caffeine Citrate Injection 20 Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) , Caffeine Citrate Oral Solution 20 Mg/Ml,3Ml , Clarithromycin Tablet 500 Mg , N- Acetylcysteine Tablet 600 Mg , Glycopyrronium 25 Mcg + Formoterol Fumarate 12 Mcg Rota Caps , Oral Glucose 75 Gm , Dextrose Intravenous Infusion Ip 5 % W/V , 500 Ml Ffs Bottle , Dextrose Intravenus Infusion Ip 10% W/V, 500 Ml Ffs Bottle , Dextrose Intravenous Infusion Ip 25% W/V, 100 Ml Ffs Bottle , Dextrose 5 % W/V With Sodium Chloride 0.9% W/V For Intravenous Infusion 500 Ml Ffs Bottle , Multi Electrolyte Injection (Isolyte P Multiple Electrolyte & Dextrose Injection Type 1 ), 500 Ml Ffs Bottle , Potassium Chloride Oral Solution 10%, 100 Ml Bottle , Potassium Chloride (Solution) Injectable 15% (150Mg/Ml) , 10 Ml Amp. , Ringer Lactate (Solution ) For Injection ( Compound Sodium Lactate) 500 Ml Ffs Bottle , Normal Saline (Sodium Chloride) Injection Solution 0.9% Isotonic, 100Ml , Normal Saline Injection 3% , Normal Saline (Sodium Chloride) Injection 0.9% W/V, 500 Ml Bottle ( Ffs Technology) , Water For Injection 5Ml Ampoule , Injection Human Albumin 5% Infusion Solution 5% , Injection Human Albumin 20% Infusion Solution 20 , Ascorbic Acid Tablet 500 Mg , Pyridoxine Tablet 10 Mg , Pyridoxine Tablet 100 Mg , Vitamin A Oral Solution 100000 Iu/Ml, 100 Ml , B-Complex Tablet , Vitamin D3 Drops 400 Iu/Ml , Vitamin D3 Tablet (Chewable) 60000Iu , Calcium Salts 500 Mg+ Vitamin D3 250 Iu Tablet , Thiamine Injection 100 Mg/Ml, 2 Ml Vial , Calcium Phosphate Suspension/Syrup:- Each 5Ml Contains: Vit D3 (Cholecatciferol) Ip-200Iu Vitamin B12 (Cyanocobalamin) Ip 2.5Mcg, Calcium- 82Mg (As A Mixture Of Calcium Phosphats Calculated As 0.12G Ca3 (Po4) 2 Suspension/Flavoured Syrupy Base- Q.S. 200Ml Bottle. , Hematinic With Amino Acids Vitamin And Zinc Syrup 200 Ml Bottle, Each 10 Ml Contains: Ferrous Glycine Sulphate-216.50Mg, L-Histidine Hcl-25.0 Mg, Pyridoxine Hydrochloride Ip-1.5 Mg, Nicotinamide Ip-25.0 Mg, Folic Acid Ip-0.5 Mg, Cyanocobalamin Ip-2.5 Mcg, Zinc Ascorbate 50 Mg, Approved Colors Used , Multi Vitamin Infusion 10 Ml: Each Ml Contains Vitamin A (As Vitamin A Concentrate Oily Form) Lp 1100 Lu, Cholecalciferol Lp 100 Lu, Tocopheryl Acetate Lp 0.5Mg, Nicotinamide Lp 10Mg, Riboflavin Sodium Phosphate Lp 1.4Mg, Pyridoxine Hydrochloride Lp 1.65Mg, Thiamine Hydrochloride Lp 5.0Mg, Ascorbic Acid Ip 50.0Mg, L-Cysteine Hydrochloride Usp 0.2Mg, Benzyl Alcohol (As Preservative) Lp 1.0% V/V, Water For Injections Lp Q.S , Methylcobalamin Tablet 1500 Mcg , Pregabalin 75 Mg+ Methylcobalamin 1500 Mcg Tablet , Alfacalcidol Soft Gelatin Capsule 0.25 Mcg , Biotin Tablet 10 Mg , Thiamine Tablet 100 Mg , 10 Essential Amino Acid With Vitamins And Minerals Capsules (10X10) , Amino Acid Iv Infusion Minimum 10 Essential Amino Acids, 250Ml Bottle - , Artesunate Injection 60 Mg/Ml , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Tablet 250 Mg, Equivalent To 155 Mg Chloroquine Base , Chloroquine Phosphate Oral Solution 50 Mg/ 5 Ml, 50 Ml Bottle , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Primaquine Tablet 15 Mg , Quinine Sulphate Tablet 300 Mg , Quinine Dihydrochloride Injection 300 Mg/Ml, 2 Ml Ampoule , Sulfadoxine + Pyrimethamine Tablet 500 Mg + 25 Mg , Temphos 50% Ec 5 Liter Pack , Malathion Technical 95%, 250 Kg , Deltamethrin 2.5% Wp, 25 Kg , Cyphenothrin 5% Ecs (Insecticide/Adulticide For Fogging) , Bivalent Antigen Based Rapid Diagnostic Kit For Malaria , Pyrethrum Extract 2% , Dengue Ns1 Antigen Elisa Based Test Kit,96 Test/Kit - , Mac Elisa Igm Dengue Kit , Sofosbuvir 400 Mg Tablet + Ledipasvir 90 Mg Tablet , Sofosbuvir 400 Mg Tablet , Daclatasvir 60 Mg Tablet , Daclatasvir 30 Mg Tablet , Entecavir 1 Mg Tablet , Entecavir 0 .5 Mg Tablet , Ribavirin Capsules 200 Mg , Tenofovir Tablet 300 Mg , Sofosbuvir 400Mg+ Velpatasvir 100 Mg Tablet , Rtpcr Kits For Quantitative Viral Load Test For Hepatitis B Virus , Rtpcr Kits For Quantitative Viral Load Test For Hepatitis C Virus , Storage Vial 5 Ml , Racked Filter Pipette Micro-Tips(Sterile) 10 Ul , Racked Filter Pipette Micro-Tips(Sterile) 20 Ul , Racked Filter Pipette Micro-Tips(Sterile) 1000 Ul , Racked Filter Pipette Micro-Tips(Sterile) 200 Ul , Filter Pipette Micro-Tips (Sterile) 10 Ul , Filter Pipette Micro-Tips (Sterile) 20 Ul , Filter Pipette Tips (Sterile) 100 Ul , Filter Pipette Tips (Sterile) 200 Ul , Filter Pipette Tips (Sterile) 1000 Ul , Ethanol Imported (20 Bottles Per Bottle) 5 Liter Pack , Molecular Biology Grade Water As Per Requirement , Screw Capped Storage Vial 2Ml (500 Vials) Per Pack 2 Ml , 100 Well Micro Tube Storage Box , Para Film , Blue Nitrile Gloves , Single Channel Variable Volume Micropipette 0.5-10 Ul , Single Channel Variable Volume Micropipette 02-20 Ul , Single Channel Variable Volume Micropipette 05-50 Ul , Single Channel Variable Volume Micropipette 10-100 Ul , Single Channel Variable Volume Micropipette 20-200 Ul , Single Channel Variable Volume Micropipette 100-1000 Ul , 96 Well Qper Plates With Adhesive Optical Scaling Membrane , Individual Pcr Tubes 8-Tube Strips(Clear) , Optical Flat 8-Cap Strips 0.2Ml Tube Strips , 8 Channel Variable Value Micropipette 2-20 Ul , Micro Centrifuge Tubes Mctival (Sterile) 2 Ml , 96 Well Reversible Rack F 0.5 To 2.0Ml Vials , Rnase And Dnase Degradation Solution , Rnase And Dnase Degradation Solution Wipes , Dna Blood Extraction Kit , Viral Rna Extraction Kit , Purified Freeze € Dried Human Coagulation Factor Viii, Virus Inactivated Injection 250 Iu , Anti Hemophillic Factor Ix Vial Injection Size 500 Iu , Anti Hemophillic Factor Vii Injection 1Mg,Vial/Ampoule , Anti Hemophillic Factor Vii Injection 2Mg,Vial/Ampole , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 500 Iu,Vial/Ampoule , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 1000 Iu,Vial/Ampoule , Recombinant Anti Haemophilic Factor Viii (Rf Viii)Standard Half Life Injection 250 Iu , Recombinant Anti Haemophilic Factor Viii (Rf Viii)Extended Half Life Injection 500 Iu , Recombinant Anti Haemophilic Factor Ix(Rf Ix )Standard Half Life Injection 250 Iu , Recombinant Anti Haemophilic Factor Ix (Rf Ix)Extended Half Life 500 Iu , Emicizumab-Kxwh Injection 30 Mg/Ml , Emicizumab-Kxwh Injection 60 Mg/0.4 Ml , Anti Haemophilic Factor Ix Vial Injection 600Iu , Leuco Reduction Filter Bed Side For Packed Red Blood Cells - , Sanitary Napkin , Weekly Iron Folic Acid Tablet Each Tablet Containing 60 Mg Elemental Iron+500 Mcg Folic Acid, Sugar Coated ,Blue Colour , Iron And Folic Acid Tablet ( Wifs Junior ) Containing Dried Ferrous Sulphate Ip Equivalent To Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet. Tablet Are Sugar Coated And Pink Coloured Tablets With Only Edible Colours Used Tablet Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet , Salt Testing Kit , Oseltamivir Tablet 75 Mg , Oseltamivir Tablet 45 Mg , Oseltamivir Tablet 30 Mg , Oseltamivir Syrup (Each 1 Ml Reconstituted Suspension Contain 12 Mg Oseltamivir, 75 Ml Bottle) Syrup , Seasonal Influenza Quadrivalent/ Tetravalent Vaccine , Deferiprone Tablet 500 Mg , Deferasirox Tablet 500 Mg , Desferrioxamine Injection 500 Mg , Medroxyprogesterone Acetate Injection Ip (Dmpa ) 25 X 1X 1Ml (Contraceptive Injection For Im Use Only) , Single Blood Bags 350 Ml , Double Blood Bags 350 Ml , Triple Blood Bags 450 Ml , Quadruple Blood Bags 450 Ml , Double Blood Bag 450 Ml , Triple Blood Bags 350 Ml , Triple Blood Bag With Sagm 350 Ml , Triple Blood Bag With Sagm 450 Ml , Quadruple Blood Bag With Sagm 350 Ml , Quadruple Blood Bag With Sagm 450 Ml , Hiv Elisa (96 Test Each) , Hbsag Elisa (96 Test Each) , Hcv Elisa (96 Test Each) , Hiv Rapid (30 Test Each) , Hbsag Rapid (30 Test Each) , Hcv Rapid (30 Test Each) , Rpr/Vdrl (50 Test Each) , Reagents Anti-A, Anti-B, Anti-D Sera , Reagents Anti-Ab Serum , Reagents Antihuman Globulin Serum , Reagents Anti-A1 (Lectin) Serum , Reagents Bovine Albumin 22% , Aprepitant 80Mg (Kit Contains 3 Caps) , Aprepitant Kit 120 Mg , Bleomycin Injection 15 Mg, 15 Mg/Ml Vial , Capecitabine Tablet 500 Mg , Capecitabine Tablet 1000 Mg , Carboplatin Injection 150 Mg, 10 Mg/Ml Vial , Carboplatin Injection 450 Mg, 10Mg/Ml Vial , Cisplatin Injection 50 Mg, 1 Mg/Ml Vial , Cisplatin Injection 10 Mg , Cyclophosphamide Injection 1000Mg, 1.33Mg/Ml Vial , Cyclophosphamide Injection 500Mg, 10Mg/Ml Vial , Cyclophosphamide Tablet 50 Mg , Dacarbazine Injection 200 Mg, 10Mg/Ml Vial , Dacarbazine Injection 500 Mg , Docitaxel Injection 120 Mg, 20Mg/ 0.5 Ml Vial , Doxorubicin (Hydrochloride Powder) Aqueous Solution 10Mg/2Ml , Doxorubicin (Hydrochloride Powder) Aqueous Solution 50 Mg/ 2 Ml Vial , Epirubicin Injection 50 Mg, 2Mg/Ml Vial , Epirubicin Injection 10 Mg, 2Mg/Ml Vial , Etoposide Injection 100Mg, 20Mg/Ml Vial , Etoposide Capsule 50 Mg , 5-Fluorouracil Injection 500Mg, 50Mg/Ml Ampules , Fluorouracil Injection 1 Mg , Filgrastim Injection 300Mcg, 300Mcg/0.5 Ml Prefilled Syringe , Peg Filgrastim Injection 6 Mg , Geftinib Tablet 250 Mg , Gemcitabine Injection 200Mg, 100Mg/Ml Vial , Gemcitabine Injection 1000Mg, 10Mg/Ml Vial , Imatinib Tablet 400 Mg , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Lenalidomide Tablet 10 Mg , Letrozole Tablet 2.5 Mg , Oxaliplatin Injection 50Mg, 5Mg/Ml Vial , Oxaliplatin Injection 100Mg, 5Mg/Ml Vial , Paclitaxel Injection 260Mg, 10Mg/1.67 Ml Vial , Pemetrexate Injection 500Mg, 25Mg/Ml Vial , Tamoxifen Citrate Tablet 20 Mg , Tamoxifen Citrate Tablet 10 Mg , Vinblastine Injection 10 Mg, 1Mg/Ml Vial , Vincristine Injection 1 Mg, 1Mg/Ml Vial , Ateplase Injection 20 Mg , Ateplase Injection 50 Mg , Tenecteplase Injection 20 Mg , Rituximab Injection 500 Mg , Methotrexate Injection 50 Mg , Methotrexate Tablet 50 Mg , Zolidronic Acid Injection 4 Mg , Actinomycin Injection 0.5 Mg , Goserline Injection 10.8 Mg , Luperolide Injection 22.5 Mg , Degaralix Injection 240 Mg , Thalidomide Tablet 100 Mg , Exemestene Tablet 1 Mg , Sunitinib Tablet 50 Mg , Pazopanib Tablet 200 Mg , Dexamethasone Tablet 4 Mg , Dexamethasone Tablet 8 Mg , Erlotinib Tablet 100 Mg , Morphine Tablet 10 Mg , Morphine Tablet 30 Mg Special Repair , Buprinorphine Patch 5 Mg , Buprinorphine Patch 10 Mg , Buprinorphine Patch 15 Mg , Iohexol Injection 300 Mg , Zoledronic Acid Injection 4 Mg , Trastuzumab Injection 150 Mg , Trastuzumab Injection 450 , Onco Bcg Injection , Onco Bcg 80Mg Injection , Mitomycin Injection 40 Mg , Granisetron Injection 1 Mg , Leucovorin Injection 50 Mg , Bortezomib Injection 2 Mg , Ifosfamide Injection 1 Gm , Mesna Injection 400 Mg , Carfilzomib Injection 60 Mg , Bicalutamide Tablet 50 Mg , Sorafenib Tablet 200 Mg , Temozolamide Tablet 100 Mg , Temozolamide Tablet 250 Mg , Clindipine Tablet 10 Mg , Codon Set , Codon I/V Set Woth Air Vent & 0.2 Micron Filter , Granisetron Injection 3 Mg , Reteplase Injection 10.4 U(18.1 Mg) Kit , Meropenum Injection 125 Mg , Meropenum Injection 500 Mg , Piperacillin 1 Gm + Tazobactum 0.12Gm Injection , Piperacillin 4 Gm + Tazobactum 0.5Gm Injection,Vial Injection 4 Gm+ 0.5 Gm , Netilmycin Injection 25Mg/Ml , Ethamsylate Injection 250 Mg/2 Ml , Dns ( Sodium Chloride And Dextrose, Each 100 Ml Contains Dextrose 5 Gm, Nacl 0.9 G) , Calcium Syrup Each 5 Ml Contains Calcium 250Mg, Vitamin D3 125 Iu , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) , Ecg Electrodes (Neonate) , Umbilical Catheter No. 5, (5 Fr Length 37 Cm, -31Ml/Min Pvc , Umbilical Catheter No. 6 (6 Fr Length 37 Cm, -31Ml/Min Pvc , Oxygen Tubing, Suction Tubing (Different Colours) , Triway (Three Way Stop Clock) Lipid Resistant Pyrogen Free, Sterile, Latex Free , Bone Narrow Needle For Neonates 18 G , Blood Lancets For Glucometer , Grip Lock , Picc Line 24 G, 28 G , Suction Plain Catheter No. 6, Disposable Pyrogen Free , Suction Plain Catheter No. , 8 Disposable Pyrogen Free , Oxygen Hood For Neonates , T- Connector , Y- Connector For 8-10 Mm , Nasal Prongs Term & Preterm Single Patient Use With Twin Bore Nasal Pronges Sets, Extra Soft Medical Grade Nasal Tips , Nasal Prongs Preterm (Pead) 3.0 & 3.7 Mm - , Octopus Arc-Biannual Rate Contract Connector (Length 1-10 Cm 1.5*2.5, 2-10 Cm 1.5*2.8)Pur Vol- 0.57 Ml , Q-Way 6 Inches ,Sterlized Using Ethylene Oxide , Tegaderm 2, 3/8 Inch*2.3/4 Inch 6*7 Cm Tegaderm Tm Films Iv Transparent Film Iv Transparent Film Dressing Style(Latex Free) , Uro Bag (Neonates)- 100 Ml , Dyna Plast Adhesive Tape ( 10 Cm Width, 5 Cm Length) , Surfactant- Survanta(Synthetic)(25 Mg/1Ml), Exosurf (Bovine) , Micro Drip Set , Transpore 2 , Transpore 4 , Chest Drain (Adults) , Disposable Needle 24 , Anti Diptheria Serum , Td Vaccine , Erythromycin Tablet 250 Mg , Erythromycin Syrup 125 Mg/5 Ml, 60 Ml , Hepatitis B Vaccine (R Dna) I.P. , Urine Screening Through Dry Chemistry Rapid Testing Kit/Strips For Multiple Drug Uses:- 1. Morphine/ Opiates 2. Buprenorphine 3. Tramadol 4. D. Propoxyphene 5. Benzodiazepines Test Kit Kit , Nicotine Patches , 1.Nicotine Patches 7Mg 2. Nicotine Patches 14Mg , Nicotine Pastilles 2 Mg , Nicotine Pastilles 4 Mg , Tablet Vareniciline 0.5Mg , Tablet Vareniciline 1 Mg , Tablet Buspirone 5 Mg , Anti Rabies Vaccine Through Id Route, 1 Ml Vials Vaccine 1Ml. , Tenofovir 300 Mg+ Lamivudine 300 Mg Tablet , Dolutegravir Tablet 50 Mg , Dual Kits For Hiv And Syphilis - , Levofloxacin Tablet 250 Mg , Pyridoxine Tablet 50 Mg , Moxifloxacin Tablet 400 Mg , Cbnaat Tb Cartridges - , Cbnaat-Xdr Cartriges , Ethambutol Tablet 100 Mg , Ethambutol Tablet 400 Mg , Ethambutol Tablet 800 Mg , Clofazimine Tablet 100 Mg , Clofazimine Tablet 50 Mg , Cycloserine Capsule 250Mg , Delamanid Tablet 50 Mg , Bedaquiline (Bpq) - L Tablet , Ethinamide Tablet 250 Mg , Isoniazid Tablet 100 Mg , Isoniazid Tablet 300 Mg , 3 Hp Isoniazid Plus Rifapentine Fdc (300Mg/300Mg) Tablet , Rifapentine Tablet 150 Mg , Rifapentine Tablet 300 Mg , Rifampicin Tablet 150 Mg , Truenat Mtb Chips Test Kit , Truenat (Rip Chips) Test Kit - , Bbl Mgit Tubes For Use In Bactec Mgit 960 (7Ml) - 100 Tubes/Pkg Catalouge No 245122 , Bactec Mgit 960 Supplement Kit (100 Tests, Panta And Oadc Combined) Catalogue No: 245124 Kit - , Bactec Mgit 960 Sire Kit. One Kit Is Sufficient For 40 Test Catalogue No: 245123 , Genotype Mtbdr Si V2.0 96 Test 31796Am. Test Kits Composed Of 31796 A Genotype Mtbdr Si V2.0 - , Genotype Mtbdr Plus V2.0 30496 Am. Test Kits Composed Of 30496A Genotype Mtbdr Plus Version 2.0 And 51610 Genolyse - , Gt Blot 48 Reagent Kits , Genolyse 96 Test 51610 , 2Fdc (P) (H50 & R75) , 3Fdc Cp (A) (H75, R150 & E275) , 3Fdc (P) (H50, R75, Z150) , 4Fdc (A) (H75, R150, Z400 & E275) , Tablet Ethambutol 100 Mg 100 Mg , Rifampicin Tablet 300 Mg , Genolyse 96 Test 51610 - , Early Childhood Development (Ecd) Kit For Ashas - , Absorbant Cotton Gauze, 90 Cm X 18 Mtrs, Is No: 758:2023, Specification Mentioned Under Mdr-2017 As Amended From Time To Time ( 1X 5 Than) , Cotton Bandage Cloth, 15 Cm X 5 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) , Cotton Bandage Cloth, 10 Cm X 4 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) , Cotton Bandage Cloth, 5 Cm X 4 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) , Crape Bandages Bp(1 X 10 Rolls) 10 Cm X 4.5 Mtrs , Crape Bandages Bp(1 X 10 Rolls) 15 Cm X 4.5 Mtrs , Plaster Of Paris Bandages B.P. (1 X 10 Rolls) 10 Cm X 2.7 Mtrs, (High Strength) , Plaster Of Paris Bandages B.P (1 X 10 Rolls) 15 Cm X 2.7 Mtrs, (High Strength) , Cotton Wool Ip 100 Gm , Cotton Wool Ip 500 Gm , Orthopadding Cast/Zigzag Cotton Roll 4 , Orthopadding Cast/Zigzag Cotton Roll 6 , Disposable Syringes 2 Ml, (24G), Ribbon Pack , Disposable Syringes 5 Ml, (23G), Ribbon Pack, Reuse Preventable , Disposable Syringes 10 Ml. With Needle, Ribbon Pack , Disposable Syringes 2 Ml, (23G), Ribbon Pack , Disposable Syringes 1 Ml (23G), Ribbon Pack , Disposable Insulin Syringe (31G), Ribbon Pack , Disposable Syringe 20 Ml With Needle, Ribbon Pack , Disposable Syringe 50 Cement Concrete With Needle, Ribbon Pack , Disposable Syringes 2 Ml, (24G) Reuse Preventable , I.V. Canulas 24 With Luer Lock , I.V. Canulas 22 With Luer Lock , I.V. Canulas 20 With Luer Lock , I.V. Canulas 18 With Luer Lock , I.V. Canulas 16 With Luer Lock , I.V. Canulas 26 With Luer Lock , I.V.Sets Disposable With Air Vent , Blood Administration Set/Blood Transfusion Set. Transparent Cylindrical Drip Chamber With 200 Micron Filter. 150 Cm Long Smooth Kink Resistant Tubing. , Pedeatrics Iv Drip Set With Air Vent , Sterile Disposable Spinal Needle For Single Use 23G X 3 1/2 Inch , Sterile Disposable Spinal Needle For Single Use 25G X 3 1/2 Inch Clear/ Transparent Hub , Sterile Disposable Spinal Needle For Single Use 22 G X 3 1/2 Inch Clear/ Transparent Hub , Sterile Disposable Spinal Needle For Single Use 24 G X 3 1/2 Inch Clear/ Transparent Hub , Sterile Disposable Spinal Needle For Single Use 26 G X 3 1/2 Inch Clear/ Transparent Hub , Sterile Disposable Spinal Needle For Single Use 18 G X 3 1/2 Inch Clear/ Transparent Hub , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +17D , Endotracheal Tube, Cuffed No. 5.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.0Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +18D , Endotracheal Tube, Cuffed No. 6.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 6.0Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +19D , Endotracheal Tube, Cuffed No.6.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 6.5Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +20D , Endotracheal Tube, Cuffed No. 7.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 7.0Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +21D , Endotracheal Tube, Cuffed No. 7.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 7.5Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +22D , Endotracheal Tube, Uncuffed No. 4.5 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 4.5Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +23D , Endotracheal Tube, Uncuffed No. 2.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 2.5Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +24D , Endotracheal Tube, Uncuffed No. 3.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 3.0Mm - , Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +25D , Endotracheal Tube, Uncuffed No. 3.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 3.5Mm - , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +17D , Endotracheal Tube, Uncuffed No.4.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 4.0Mm - , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +18D , Endotracheal Tube, Uncuffed No. 5.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.0 Mm - , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +19D , Endotracheal Tube, Cuffed No. 5.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.5Mm - , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +20D , Endotracheal Tube, Cuffed No. 8.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 8.0Mm - , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +21D , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +22D , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +23D , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +24D , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +25D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +17D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +18D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +19D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +20D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +21D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +22D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +23D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +24D , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +25D , Infant Feeding Tube 4 , Infant Feeding Tube 5 , Infant Feeding Tube 7 , Infant Feeding Tube 9 , Infant Feeding Tube, Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile, Size: 6Fg , Infant Feeding Tube, Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile, Size: 8Fg , Infant Feeding Tube:Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile 10 Fg , Ryles Tube 8 , Ryles Tube 10 , Ryles Tube 12 , Ryles Tube 14 , Ryles Tube/ Nasogastric Tube (P.V.C) With Radio Opaque Lining. Size:16, Soft , Kink Resistant Pvc Tubing For Atraumatic Intubation, Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation, Four Lateral Eyes For Greater Efficiency, Radio Opaque Line, Marking At 50, 60, 70 Cm From Tip, Colour Coded Funnel, With Luer Connector/Closure, Length 105 Cm , Mucous Suction Trap , Foleys Catheter 8 , Foleys Catheter 10 , Foleys Catheter 12 , Foleys Catheter 18 , Foleys Ballon Catheter 2 Way ( Silicon Elastomer ) Non- Toxic Pyrogen Free Sterile For Single Use Only , Size 14, Single Sterile Packing , Foleys Ballon Catheter 2 Way ( Silicon Elastomer ) Non- Toxic Pyrogen Free Sterile For Single Use Only , Size 16, Single Sterile Packing , Urine Bag 2000 Ml, Single Unit Packing , Disposable Surgical Gloves No. 6.5, Isi Mark , Disposable Surgical Gloves No. 7, Isi Mark , Disposable Surgical Gloves No. 7.5, Isi Mark , Disposable Surgical Gloves No.6 , Isi Mark , Examination Gloves (Medium Size), Isi Mark , Micropore/Surgical Paper Tape 25Mm X 9.1Mtr. , Micropore/Surgical Paper Tape 50Mm X 9.1 Mtr. , Micropore/Surgical Paper Tape 75Mm X 9.1 Mtr. , Disposable Shoe Cover , Disposable Mask , Disposable Cap , Sterile Cord Clamp Non Toxic, Pyrogen Free Sterile For Single Use Only Single Unit Packing , Ecg Electrodes (Disposable Kit) Pack Of 6 , Ot Sponges With Radio-Opaque Thread (With 8 Layers 30 Cm X 30 Cm ) , Carbolic Acid 400 Ml , Opsite Eye Drape Sheet With Drain Pouch 70 Cm X 70 Cm , Blades For Eye Surgery Crescent , Blades For Eye Surgery Side Port 15° , Blades For Eye Surgery Keratones 2.8 Mm , Blades For Eye Surgery Implant 5.2 Mm , Karman/ Mtp Cannula No. 6, Single Unit , Karman/ Mtp Cannula No. 7, Single Unit , Karman/ Mtp Cannula No. 8, Single Unit , Mr Cannula No. 5 , Mr Cannula No. 6 , Mr Cannula No. 7 , Mr Cannula No. 8 , Disposable Sterile ,Powder Free Gloves For Eye Surgeries Surgical Gloves 6.5 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 6.5 , Disposable Sterile, Powder Free Gloves For Eye Surgeries Surgical Gloves 7 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 7 , Disposable Sterile, Powder Free Gloves For Eye Surgeries Surgical Gloves 7.5 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 7.5 , Ecg Paper 215 Mm*20 Mtr, Roll , Ecg Paper 50 Mm*20 Mtr, Roll , Ecg Paper 50 Mm*30 Mtr, Roll , Ecg Paper 60 Mm* 15 Mtr, Roll , Ecg Roll Big , Ecg Roll Small , Ecg Jelly 200 Ml Bottle , Ultrasound Jelly 200 Ml Bottle , Absorbable Gelatin Sponge, 80 X 50X 10 Mm, Single Unit , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 6 Cm X 11 Cm (3 To 6 Units Of Mesh In One Box). , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 15 Cm X 15 Cm (3 To 6 Units Of Mesh In Each Box) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 10Cm X 15 Cm Oval (1 Foil In Each Box) For Lap Of Hernia (Should Be Antibacterial) , Multilayer Tissue Separating Mesh With Polypropylene/Polyster And Polydioxanone /Collegen. 15Cm X 15 Cm Square /Circular , Surgical Spirit Bp 500 Ml , Sodium Hypochlorite Solution 10% , Acetone 400 Ml , Dodecylbispropylene Triamine 9.2Gm, Didecyldimethyl Ammonium Chloride 13.0 Gm For Fogging , Ortho-Phthaldehyde 0.55% W/W Solution For Sterlization, 5 Liter , Potassium Peroxomonosulphate 50% W/W Containig Aldehyde Free Disinfectant , 5 Kg , Dark Eye Glasses , Disposable Eye Patch , I.O Dye (Rhex Id Dye) Each (Indigo Blue Dye) , Surgical Blades11 (Pack Of 100) , Surgical Blades15 (Pack Of 100) , Surgical Blades20 (Pack Of 100) , Surgical Blades23 (Pack Of 100) , Surgical Blades 24 (Pack Of 100) , Oxygen Venti-Mask (Pvc/Disposable)Adult , Oxygen Venti-Mask (Pvc/Disposable)Medium , Oxygen Venti-Mask (Pvc/Disposable)Paed. , Nebulisation Set (Mask With Tubing With Chamber (Adult ) , Nebulisation Set (Mask With Tubing With Chamber (Paediatric ) , Diaper Paediatric (Extra Small Size For Neonates) , Disposable Adhesive Cannula Fixator , Patient Identification Band Mother & Child Size (Different Colours) , Patient Identification Band Adult Size (Different Colours) , Patient Identification Band Paediatric Size (Different Colours) , Suction Catheter No. 10 , Single Unit , Suction Catheter No. 16 , Single Unit , Negative Suction Drain/Closed Round Drain 12 , Negative Suction Drain No.14 , Negative Suction Drain No. 16 , Disposable Plastic Urine Pan , Disposable Plastic Bed Pan , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 5X 6 Cm , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 7X 9 Cm , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 6.5 Cm X 5 Cm (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 15.5 Cm X 8.5Cm (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 25 Cm X 10 Cm , (Pack Of 100) , Skin Stapler Standard ( Single Unit) , Airway Set Size 2, ( Single Unit) , Airway Set Size 3, ( Single Unit) , Airway Set Size 4, ( Single Unit) , Airway Set Size 5, ( Single Unit) , Ambu Bag Adult, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 7 K Pa ( 70 Cm H2O Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 1300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Ped, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 4 K Pa ( 40 Cm H2O Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Courtery Lead ( Single Unit) , Coutery Pad (Single Unit) , Lega Clip Size Lt 300 (Titanium Ligating Clips Medium Size Having Lateral And Transverse Grooves On The Inner Clips), (Single Unit) , Lega Clip Size Lt 400 (Titanium Ligating Clips Large Size Having Lateral And Transverse Grooves On The Inner Clips), (Single Unit) , Shoulder Immobilizer Standard , Pouch Arm Sling Standard , Centre Line , Cervical Collar Small Size (Soft) , Cervical Collar Medium Size (Soft) , Cervical Collar Large Size (Soft) , Hard Cervical Collar (Universal) Size , Chest Drain Catheter No.12 , Chest Drain Catheter No.14 , Chest Drain Catheter No.28 , Chest Drain Catheter No.32 , Chest Tube Drainage With Water Seal Bag No.28 , Chest Tube With Water Seal No.32 , Dj Stunt , Dj Stunt No.5.5 , Dj Stunt No. 6 French End Closed , Dj Stunt No 5/26 Both End Open , Dj Stunt No 6/26 Both End Open , Epidural Set , Guide Wire Teflon Coated J Tip , Guide Wire Teflon Coated V Straight Tip , Spc Set (Suprapubic Catheter Set) , Turp Loop , Skin Traction Set Standard Size , I.V. Flow Regulator Extension Sets , Blades For Eye Surgery Keratones 3.2 Mm , Balance Salt Solution (Bss For Eye Surgery) 500 Ml , Craner Wire Splint , Air Mattress , Bb Splint (Bohler- Braun) , Bed Side Pulley , Skeletal Traction , Disposable Needle 16 , Disposable Needle 23 , Disposable Needle 26 , Pmo Line , Troponin T, Sensitivity:-Not Less Than 95.8%, Direct Whole Blood Test Kit , 3D Mesh For Lap Ingunal Hernia A)Right Side B)Left Side - , Partial Absorble (10X6 Cm)Vicryl Mesh For Ipom , Tackers For Mesh Fixation (Non Absorable) , Measured Volume Fluid Infusion Set With 110Ml/150Ml Chamber - , Medical X-Ray Films(1X50) 8X10 , Medical X-Ray Films(1X50) 10X12 , Medical X-Ray Films(1X50) 12X15 , Medical X-Ray Films(1X50) 14X14 , Medical X-Ray Films(1X50) 14X17 , Agfa Cr Film (Dt2B)(1X100) 8X10 , Agfa Cr Film (Dt2B)(1X100) 10X12 , Agfa Cr Film (Dt2B)(1X100) 11X14 , Agfa Cr Film (Dt2B)(1X100) 14X17 , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle , Catgut Suture (Chromic Catgut)Usp 1, 76 Cm X 63 Mm, 3/8 Circle (12 Foils In Each Box) Round Body Needle - , Chromic Catgut Absorbable Suture Usp 1,76Cm Length 1/2 Circle 40Mm, Round Body Needle (12 Foils In Each Box) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle , Silk Sutupak Usp 1, 75 Cm (12 Foils In Each Box) , Silk Suture Usp 0, 76Cm X 45 Mm , 3/8 Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) , Silk Suture Usp 3-0, 90 Cm X 16 Mm , 3/8 Circle Type Of Needle- Cutting (12 Foils In Each Box) , Polyglactin (Violet) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box)Should Be Antibacterial , Polyglactin (Violet) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) Should Be Antibacterial , Polyglactin (Violet) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box)Should Be Antibacterial , Polyglactin (Plain) Vicryl Usp-1, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle Reverse Cutting - , Polyglactin Synthetic Braided Absorbable Suture, Usp-1, 90Cm Length, Violet 1/2 Circle 40Mm Round Body Needle (12 Foils In Each Box) , Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied (12 Foils In Each Box) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle (12 Foils In Each Box) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body (12 Foils In Each Box) , Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) , Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle.Should Be Antibacterial. , Knotless Control Device Polygecaprone 3/8 Circle Reverse Cutting Needle 24 Mm Spril Unidireectional 30Cm With Antibactreal Triclosan Coated 3/0 - , Knotless Control Device Polygecaprone 1/2 Circle , 40 Mm ,Taper Point,Ct,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 1/0 - , Knotless Control Device Polygecaprone 1/2 Circle , 36 Mm ,Taper Point,Ct,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 1 , Knotless Control Device Polygecaprone 1/2 Circle , 26 Mm ,Taper Point,Sh,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 2/0 , Silver Alloy Non-Gamma-2 Lathe Cut Alloy , Mercury Pure Triple Distilled , Cavity Varnish 5% Sodium Fluoride , Calcium Hydroxide, Powder , Topical Fluoride Apf Gel 1.25% , Gum Paint , Edta 17 % Paste Form. , Pulp Devitalizer , Rubber Dam Kit , Air- Rotor Diamond Burs No. 1 (Inverted Bur) , Air- Rotor Diamond Burs No. 1 (Straight End Taper) , Air- Rotor Diamond Burs No. 1 (Round) , Air- Rotor Diamond Burs No. 1 (Straight) , Air- Rotor Diamond Burs No. 1 (Flame) , Air- Rotor Diamond Burs No. 2 (Inverted Bur) , Air- Rotor Diamond Burs No. 2 ( Straight End Taper) , Air- Rotor Diamond Burs No. 2 (Round) , Air- Rotor Diamond Burs No. 2 (Straight) , Air- Rotor Diamond Burs No. 2 (Flame) , Air- Rotor Diamond Burs No. 3 (Inverted Bur) , Air- Rotor Diamond Burs No. 3 ( Straight End Taper) , Air- Rotor Diamond Burs No. 3 (Round) , Air- Rotor Diamond Burs No. 3 (Straight) , Air- Rotor Diamond Burs No. 3 (Flame) , K-Files - Size- 15-40 , Length:-21 Mm , Should Have Rubber Stopper , K-Files - Size- 15-40 , Length:-25 Mm , Should Have Rubber Stopper , K- Files Size- 45-80, Length:-25 Mm, Should Have Rubber Stopper , K-Files Size- 6, Length :- 21 Mm , Should Have Rubber Stopper. , K-Files Size- 6, Length :- 25 Mm , Should Have Rubber Stopper. , K-Files Size- 8, Length :- 21 Mm , Should Have Rubber Stopper. , K-Files Size- 8, Length :- 25 Mm , Should Have Rubber Stopper. , K-Files Size- 10, Length :- 21 Mm , Should Have Rubber Stopper. , K-Files Size- 10, Length :- 25 Mm , Should Have Rubber Stopper. , Niti Hand Files (21 Mm) Size- 15-40, For Curved Canals , H-Files , Size-15-40 , Length :-21 Mm, Should Have Rubber Stopper , H-Files , Size-45-80, Length :-25 Mm Should Have Rubber Stopper , Matrix Strips,Made From A Thin, Strong, Flexible, Transparent Material Such As Mylar , Barbed Broaches , Made Of Stainless Steel, Can Be Sterilized Length ‰¥ 21 , Articulating Paper Strip, Red Colored With Sufficient Thickness Double Side , Articulating Paper Strip, Blue Colored With Sufficient Thickness Double Side , Matrix Band Retainer , No. 1 , Matrix Band Retainer , No.8 , Matrix Band , No. 1, Toflemire , Matrix Band , No. 8, Toflemire , Paper Point 25 , Paper Point 30 , Paper Point 35 , Mini Plates Isi/ Iso/Ce/Marked. , Arch Bar Length 1Feet Isi/ Iso/Ce/Marked. , Air Rotor Cartridges (Nsk) Supertorque, Standard Head Isi/ Iso/Ce/Marked. , Composite Finishing Kit- Disc Type , Composite Finishing Kit With 12 To 24 Finishing Point Of Different Shapes. The Durable Abbresive Points Are Autoclavabal And Cost Effective, Comprehensive Selection Of Plain For Finishing And Polishing In One Kit, For Fast And Efficient Finishing The Use Of Conjunction With The Composite Polishing Kit, Average Speed 5000 To 12000 Rpm Kit - , Iopa Film Size 30 Mm X 40 Mm , Iopa Film Size 31 Mm X 41Mm , Formocresol Formalin, Cresol Glycerin ,Formocresol Formalin Bp 20% V/V , Cresol Ip 32% V/V , Glycerin Ip Qs , Dental Chair Covering Sterilized Cling Foil Rolls Isi/ Iso/Ce/Marked. , Small Cotton Rolls For Isolation Isi/ Iso/Ce/Marked(Length-37Mm, Dia-8-10Mm) , Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Pale Yellow Powder & Liquid 15Gm Powder & 10 To 13 Liquid , Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Yellow Brown Powder & Liquid 15Gm Powder & 10 To 13 Liquid , Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Dark Grey Powder & Liquid 15Gm Powder & 10 To 13 Liquid , Pit & Fissure Sealant ( 6 Ml Bottle) Solution With High Flouride Releasing, Low Viscocity, High Retention, Rapid Cure & Low Solubility Liquid 6 Ml , Calcium Hydroxide , Paste System Based And Catalyst -Radiopaque, 4 Gm Paste 4 Gm , Zinc Phosphate Cement , 20 Gm Powder And 10 Ml Liquid Powder & Liquid 20 Gm Powder And 10 Ml Liquid , Glass Ionomer Cement- Type-Ix, High Strenth For Posterior Teeth, Chemical Setting Without Shrinkage, Strontium Based, High Flouride Releasing, 12 To 15 Gm Powder And 5 To 10 Gm Liquid Powder & Liquid 12 To 15 Gm Powder & 5 To 10 Ml Liquid , Hybrid Composite Resin For Anteriors (All Shades), High Strength, Long Lasting Wear Resitance, Great Handling Without Stick, 4 Gm Isi/ Iso/Ce/Marked. 4 Gm , Mineral Trioxide Aggregate, 0.5 Gm Isi/ Iso/Ce/Marked. 0.5 G , Flowable Composite 2 Mg Syringe, Flowable Consistancy Thicsotrophic, Low Shrinkage, Radiopaque, Easily Polishability, Should Be Hybrid, Wear Resistance, Syringe Design To Eleminate Bubbles 2 Mg , Niti Rotory Files 4%, 21 Mm (Pkt Of 6) Refill Pack Of(#15,#20,#25,#30,#35,#40) 21 Mm , Niti Rotory Files 4%, 25 Mm (Pkt Of 6) Refill Pack Of (#15,#20,#25,#30,#35,#40) 25 Mm , Niti Rotory Files 6%, 21 Mm (Pkt Of 6) Refill Pack Of( #15,#20,#25,#30,#35,#40) 21 Mm , Niti Rotory Files 6%, 25 Mm (Pkt Of 6) Refill Pack Of( #15,#20,#25,#30,#35,#40) 25 Mm , Crown Cutting Kit, Set Of 14 Burs - , Adhesive Resin Cement (Dual Lock Composite Resin Cement), 4.5 Gm Isi/Iso/Ce Marked Cement 4.5 Gm , Etchant 37% Phosphoric Acid ( 9 Ml Syringe) Solution , Root Canal Spreader 15-40, 21 Mm Isi/Iso/Ce Marked , Root Canal Spreader 15-40, 25 Mm Isi/Iso/Ce Marked , Gutta Percha Point No. 20, Isi/Iso/Ce Marked , Gutta Percha Point No. 25, Isi/Iso/Ce Marked , Gutta Percha Point No. 30, Isi/Iso/Ce Marked , Gutta Percha Point No. 15-40, Isi/Iso/Ce Marked , Gutta Percha Point No. 45-80, Isi/Iso/Ce Marked , Absorbent Point No.15-40, Isi/Iso/Ce Marked Packet Of 200 , Absorbent Point No.45-80, Isi/Iso/Ce Marked Packet Of 200 , Stainless Steel Wire 26G. Soft Isi/Iso/Ce Marked , Gates Glidden Drill No.1 , Gates Glidden Drill No.2 , Gates Glidden Drill No.3 , Pillow Cover Cotton Size:48 X 70 Cm, Color - Violet , Pillow Cover Cotton Size:48 X 70 Cm, Color - Indigo , Pillow Cover Cotton Size:48 X 70 Cm, Color - Blue , Pillow Cover Cotton Size:48 X 70 Cm, Color - Green , Pillow Cover Cotton Size:48 X 70 Cm, Color - Yellow , Pillow Cover Cotton Size:48 X 70 Cm, Color - Orange , Pillow Cover Cotton Size:48 X 70 Cm, Color - Peach , Bed Sheet Size-150 X 240 Cm, Color:Violet , Bed Sheet Size-150 X 240 Cm, Color:Indigo , Bed Sheet Size-150 X 240 Cm, Color:Blue , Bed Sheet Size-150 X 240 Cm, Color:Green , Bed Sheet Size-150 X 240 Cm, Color:Yellow , Bed Sheet Size-150 X 240 Cm, Color:Orange , Bed Sheet Size-150 X 240 Cm, Color:Peach , Ot Linen Poplin- Green Color, Size : 90 X 90 , Ot Linen Poplin- Green Color, Size : 90 X 140 , Ot Linen Poplin- Green Color, Size : 140 X 210 , Ot Linen Poplin- Green Color, Size : 90 X 90 (With Oval) , Ot Linen Poplin- Green Color, Size : 90 X 140 (With Circular Hole Of Size 10€ Diameters In Centers Green Color) , Ot Linen Poplin- Green Color, Size : 130 X 180 (With Circular Hole Of Size 10€ Diameters In Centers Green Color) , Ot Linen Cotton White 88X88 Cm. With Hole Size 9 X 10 Cm. In Centre And Should Be Folded And Stitched So There Are No Loose Ends. , Ot Gown Poplin Length 130 X 135 Cms Arm’S Length 58 X 60 Back Open Type With Provision Of Tying With String At Back Arm Should Have Elasting Cuff Or Cord For Tying At Cuff End. The Inside Of Gown Should Be Inter Lock So That There Are No Loose Threads , Patient Dress Kurta Payjama (Striped Blue) Small. Kurta Length 70 X 80 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) , Patient Dress Kurta Payjama (Striped Blue) Medium. Kurta Length 80 X 90 Cms Arm Length 22X 24 Cms.V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) , Patient Dress Kurta Payjama (Striped Blue) Large. Kurta Length 100 X 105 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) , Doctor Dress Kurta Payjama (Blue) Small. Kurta Length 70 X 80 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) , Doctor Dress Kurta Payjama (Blue) Medium. Kurta Length 80 X 90 Cms Arm Length 22X 24 Cms.V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) , Doctor Dress Kurta Payjama (Blue) Large. Kurta Length 100 X 105 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) , Towel 56 X 115 Cms. White Color , Dental Sheet Green Cotton 45 X 45 Cms. , Aprons (Lab Coats ) (Small) Full Size, Full Sleeves , Aprons (Lab Coats) (Medium) Full Size, Full Sleeves , Aprons (Lab Coats) (Large) Full Size, Full Sleeves , Legging Each Leg Poplin 40 X 40 Cms. Green Color Bottom Closed , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color , Kurta, Petticoat Sets Large Size , Green Strip , Glass Lonomer Silver Reinforced Isi/Iso/Ce Marked , Glass Lonomer Luting Cement Isi/Iso/Ce Marked , Rubber Dam Sheet Isi/Iso/Ce Marked , Sterilization Rolls For Packing Instrument 15Cm X 200Mtrs , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , 6% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 30 , 6% Taper Gutta Percha Size 35 , 6% Taper Gutta Percha Size 40 , 4% Taper Gutta Percha Size 25 , Esthetic Fiber Post System , Pre Fabricated Metallic Post ( Cemented) , Pre Fabricate Metallic Post (Threaded) , Rubber Base Impression Material Addition Silicone Putty With Compatible Light Body 600-900Ml Putty With 50 Ml Light Per 300Ml Of Putty Isi/Iso/Ce Marked , Retraction Cord (Assorted Size Isi/Iso/Ce Marked , Bone Graft Material For Dental Purpose Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 1 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 1.5 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 2 Mm Isi/Iso/Ce/Marked , Resin Cement Isi/Iso/Ce Marked , Preadjusted Edgewise Stainless Steel Brackets Kit Containing Upper & Lower 2Nd Premolar To 2Nd Premolar Bondable Brackets With Upper Triple And Lower Double Weldable Buccaltubes,With Roth And Mbt Prescription And 0.022€And 0.018€ Slot (Leone/American Orth , Ni Ti Preformed Orthodontic Wire Round - 014 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 016 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 018 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 020 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -016X022 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -017X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -019X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 014 Inch (Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 016 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 018 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 020 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 016X022 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 017X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 019X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Blue Elastic Separators ( Leone/ American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Short Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Long Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Continous Types Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Yellow Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Blue Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Green Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Red Isi/Iso/Ce Marked , Colourless O Rings (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Expansion Screw 3 Pin (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Preformed Molar Bands Without Buccal Tubesisi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 2 Mm Thickness Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 3 Mm Thickness Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 19 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 20 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 21 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 23 Gauge Isi/Iso/Ce Marked , Tma Wire Lengths Rectangular - 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wire Lengths Rectangular - 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 6Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 7Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 8Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 10 Mm Isi/Iso/Ce Marked , Forsus Fatigue Resistant Device( 3 M Unitek ), Proprietary Itemisi/Iso/Ce Marked , Powerscope 2 (American Orthodontics Proprietary Item)Isi/Iso/Ce Marked , Etchant 37% Phosphate Acid In Gel Form 2-4 Gm, Isi/Iso/Ce Marked , Loose Preadjusted Edgewise Mbt Bracket 022 Slot Isi/Iso/Ce Marked Per Bracket , Bondable Buccal Tubes Upper And Lower Right And Left 1St Molars .022€ Mbt With Upper Triple And Lower Double Slot (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 2Nd Molars .022€ Mbt (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Ni-Ti Open Coil Spring0 10€X 030 (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marke , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 9Mm Isi/Iso/Ce Marked , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 12Mm Isi/Iso/Ce Marked , Eugenol 110 Ml Isi/Iso/Ce Marked , Zinc Oxide Powder 110 Gram Isi/Iso/Ce Marked , Naoci 5.25% Solution Isi/Iso/Ce Marked , Fiber-Reinforced Splinting Material- Bondable Reinforced Ribbon Fiber-Approx. 2Mm Width Isi/Iso/Ce Marked , Fixer & Developer Solution Set (Manual) To Make 13.5 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Air Rotor Spray Isi/Iso/Ce Marked Bottle , Disposable Patient Drape Sheets Size 1X1 Mtrs. , Single Use Syringes 10 Ml With Needle 23 G. X 1€ Length Sterile Isi/Iso/Ce Marked , Single Use Syringes 5 Ml With Needle 23 G. Sterile 1€ Length Isi/Iso/Ce Marked , Single Use Syringes 2 Ml With Needle 23 G. Sterile 1€ Length Isi/Iso/Ce Marked , Single Use Insulin Syringes With Needle Sterile Isi/Iso/Ce Marked , B.P. Blade Size 11 Isi/Iso/Ce Marked , B.P. Blade Size 15 Isi/Iso/Ce Marked , B.P. Blade Size 23 Isi/Iso/Ce Marked , Silk Suture Material (3-0) , N-95 Respirator Mask(Covid) , Ppe Kit(Covid) , Vtm Media(Covid) , Triple Layer Mask(Covid) , Hydroxy Chloroquine Tablet 200 Mg(Covid) , Lysol(5L)(Covid) , Sodium Hypochlorite(5L)(Covid) , Oxygen Cylinder(Covid) , Real Time Pcr Kit(Covid) , Covid19 Igm/Igm Rapid Test (Wondfo Sars-Cov-2 Antibody Test)(Covid) , Dead Body Cover(Covid) , Rapid Screening Kits For Covid-19 Test(Covid) , Denture Spirit-Surgical Spirit With Methyl Salicylate, Diethyl Phthalate And Caster Oil Dentured Alchol, 500 Ml Bottle(Covid) , Disposable Bed Sheet(Covid) , Thermal Scanner(Covid) , Tab Levocetrizine 5 Mg(Covid) , Spun Bond Non-Woven 3 Ply Face Covers(Covid) , Magna Pure 24 Total Na Isolation Kit, Pack Size-96(Covid) , Magna Pure 24 Processing Cartridge, Pack Size-48(Covid) , Magna Pure 24 Tip Ptark (Comes With Pierecing Tools)Pack Size-48(Covid) , Magna Pure Tip 1000 Ul, Pack Size-3840(Covid) , Framestrips With Flat Caps High Profile, Pack Size-120(Covid) , Magna Pure Sealing Foil,Pack Size-100(Covid) , Mplct Na Isolation Kit- Lysis/ Binding Buffer Refill, Pack Size-100Ml(Covid) , Handsanitizer (500 Ml)(Covid) , Framestrip With Flat Caps-Low Profile(Covid) , Magna Pure 96 External Lysis Buffer(Covid) , Light Cycler -480 Multiwell 11 Plate 96(Covid) , Light Cycler 8-Tube Strip Adapter Plate(Covid) , Manual Rna Extraction Kit-50 Test(Covid) , Oseltamivir 75 Mg , Covid Kavachâ„¢ Anti- Sars Cov-2 Igg Antibody Detection Elisa (96 Micro Well Coated Plate , Tocilizumab Injection 400 Mg/20 Ml(Covid) , Standard Q Covid19,Ag Test(Rapid Antigon Test) , Lc Prep Lysi/Bind Buff Dna,Mbp , Ramdesivir Injection 100Mg , Hydroxychlorine Tablet 400 Mg(Covid) 400 Mg , Dexamethasone 6 Mg Tablet(Covid) 6 Mg , Enoxaparin 40 Mg Injection(Covid) 40 Mg , Favipiravir(Covid) 400 Mg , Coronil Kit Coronil Kit Each Contains(80Tab+80Tab+20Ml) , Ayush Kwath Powder , Amphotericin B Powder For Injection 50 Mg Liposomal Complex,Vial Injection Powder 50Mg/Ml, 10Ml Vial , Tocilizumab 80 Mg , Oxygen Regulator With Humidifier Bottle,Rotameter And Key For B And D Type Cylinders , Disposable Ad Syringes 0.5Ml. , Nitrile Gloves(Large Size),Purple,Powder Free,Box Of 100 Pcs , Nitrile Gloves(Medium Size),Purple,Powder Free,Box Of 100 Pcs , Nitrile Gloves(Small Size),Purple,Powder Free,Box Of 100 Pcs , Tablet Posaconazole 100 Mg , Intravenous Immunoglobulin(Ivig) 10 Gm,100 Ml Bottle , Sars-Cov-2 Sequencing Kits Test Kit Kit , Corbevax Vaccine,10 Ml Vial , Zinc Oxide Cream 10% 10 Gm , Zinc Oxide Powder 100 Gm , Zinc Phosphate Cement , Powder And Liquid , Zinc Sulphate Dispersible Tablet 20 Mg , Zinc Sulphate Syrup 60 Ml , Zoledronic Acid Injection 4 Mg , Balloon Tamponade (Standard Size) , Miracle Mix(Standard Size) , Bonding Agent , Endo Files(Standard Size) , Orafill(Standard Size) , Pain Off(Standard Size) , Composite Syringes A1(Standard Size) , Composite Syringes B1(Standard Size) , Lignocaine Spray , Dycal(Standard Size) , Metapex(Standard Size) , Restoration Bonding Agent , Mixing Pad(Standard Size) , Coe-Pack(Standard Size) , Temephos 50% 1 Ltr , Pyrazinamide 500 Mg Tablet , Pyrazinamide 750Mg Tablet , Rifampicin 150 Mg Capsule , Rifampicin 300 Mg Capsule , Rifampicin 450 Mg Capsule , Isoniazid 300 Mg Tab. , Isoniazid 100 Mg Tab. , Ethanbutol 800 Mg Tab. , Ethanbutonl 400 Mg. Tab. , Ethanbutol 100 Mg Tab. , 4 Fdc (A) , 3 Fdc (A) , Inj. Streptomycetin 0.75 Gm , 3 Fdc Ped. (P) , 2 Fdc Ped. (P) , Pas Poder , Iec Jel Pack , Tharmocal Box , Falcon Tube 50 Ml , Tab. Pyridoxin 50 Mg , Inj. Kanamicine 18 M , Tab. Cyclocerin 500 Mg , Tab. Cyclocerin 250 Mg , Tab. Ethonamlde 250 Mg , Tab. Uvezolld , Tab. Clofazimine 100 Mg , Tab. Coprpcomycine 1 Mg , Tab. Delamanid 50 Mg , Tab. Moxifloxacin 400 Mg , Multi Drug Urine Screen Kits , Cotton Bandages(1 X 12 Rolls) 10 Cm X 4 Mtrs , Cotton Bandages(1 X 12 Rolls) 15 Cm X 5 Mtrs , Cotton Bandages(1 X 12 Rolls) 5 Cm X 4 Mtrs , Cotton Gauze Cloth(1 X 5 Than) 90 Cm X 18 Mtrs , Cotton Wool Ip 100 Gm , Cotton Wool Ip 500 Gm (Net) , Cotton Wool Ip 500 Gm , Disposable Cap , Disposable Surgical Gloves No. 6.5, Isi Mark , Disposable Surgical Gloves No. 7, Isi Mark , Disposable Surgical Gloves No. 7.5, Isi Mark , Disposable Surgical Gloves No.6 , Isi Mark , Disposable Syringe 20 Ml With Needle, Ribbon Pack , Disposable Syringe 50 Cement Concrete With Needle, Ribbon Pack , Disposable Syringes 1 Ml (23G), Ribbon Pack , Disposable Syringes 10 Ml. With Needle, Ribbon Pack , Disposable Syringes 2 Ml, (23G), Ribbon Pack , Disposable Syringes 2 Ml, (24G), Ribbon Pack , Disposable Syringes 5 Ml, (23G), Ribbon Pack, Reuse Preventable , Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 6.5 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) , Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 7 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) , Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 7.5 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) , Disposable Shoe Cover , Disposable Insulin Syringe (31G), Ribbon Pack , Disposable Mask , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle , Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle , Suture Catgut 3-0No. R.B. Needle , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle , Suture Silk 2-0No. R.B. Needle , Polyglactin (Plain) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Polyglactin (Plain) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Polyglactin (Plain) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body (12 Foils In Each Box) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle (12 Foils In Each Box) , Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) , Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied (12 Foils In Each Box) , Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) , Stadiometer , Wooden Stick (Oral Examination) , Bp Appratus , Weighing Machine (Digital) , Acetic Acid 100% , Swab Sticks For Vig Examanation , Torch , Mouth Mirror , Disttled Water , Wooden Tongue Depressor , Mantoux Test , Albumin (5X50Ml) , Alkline Phosphtase 4X24 + 4X6Ml) , Bilirubin Kit 4X60Ml) , Cholestrol Kit 5X30Ml) , Creatinine Kit (4X60M)L , Ggt (5X6.5Ml) , Glucose Kit (5X60Ml) , Hdl Kit (4X30Ml + 4X10Ml) , High Control For Semi Auto (1X5Ml) , Normal Control For Semi Auto (1X5Ml) , Sgot Kit (4X24Ml + 4X6Ml) , Sgpt Kit (4X24Ml + 4X6Ml) , Total Protein (5X50Ml) , Triglycerides Kit (4X24Ml + 4X6Ml) , Urea Kit (4X24Ml + 4X6Ml) , Uric Acid Kit (4X24Ml + 4X6Ml) , Wash Kit (4X50Ml) , Reagent For Fully Automatic Bio-Chemistry Analyser Bs400 Which Must Be In Liquid State Stable Form , Alkaline Phosphate 8X50 / 8X12.5Ml , Amylase 4 X 20 Ml/ 2 X 10 Ml , Bilirubin Total 8X50 / 8X12.5Ml , Bilirubin Direct 8X50 / 8X12.5Ml , Cholestrol 8X50Ml , Crp Fs 1X20 / 1X10Ml , Ck - Nack 4 X 20 Ml/ 2 X 10 Ml , Cpk - Mb 4 X 20 Ml/ 2 X 10 Ml , Creatinine 8X50 / 8X12.5Ml , D-Dimer 2X12Ml + 1X8Ml , Ferritin 2X20 / 1X10Ml , Glucose 8X50/8X12.5Ml , Hdl 4X20 / 2X10Ml , Hba1C 2X15 / 1X10 / 1X5Ml , Hba1C 3X20/ 2X10 / 1X10Ml , Hemolyzing Solution 500 Ml , Iron Tibc 4X20 / 2X10 , Ldh 8X50Ml + 8X12.5Ml , Ldl 4X20 / 2X10Ml , Lipase 4X20 / 2X10Ml , Ra Factor 2X20 / 1X8Ml , Acetec Acid 5% , Tablet Chlorine , Capillary Tubes , Card For Haemo Spot , Centrifuge Tube Stand 15 Ml(10*2) , Centrifuge Tube Stand 50 Ml(15*2) , Conical Flask 500 Ml , Coplin Jars , Covid Elisa Antigen Kit (Icmr Approved) , Crp 50 Test Kit (Qualitative) , Cryo Box With Lid , Cryo Vials 2 Ml , Cup For Bs400 Chemistry Analyzer , Diamond Marking Pencils , Disposable 3 Ply Mask , Disposable Alcohol Swab , Disposable Cap , Disposable Esr Pipette , Disposable Esr Tube (Westergen Method) , Disposable Gown , Disposable Shoe Cover , Distilled Double Dionized Water 5 Ltr , Distilled Triple Dionized Water 5 Ltr , Distilled Dionized Water 5 Ltr , Drums Tube , Ecg Jelly/Usg Jelly , Edta Vial (Non Vacuum) , Edta Vial (Vacuum) , Eppen Drop Vial ( Mct ) , Esr Black Vial (Non Vacuum) , Esr Black Vial (Vacuum) , Esr Stand , Face Shield , Falcon Tube Rack , Falcon Tube (All Size) , Filter Paper , Filter Tip 100 Micro Litre (1*960) , Filter Tip 20 Micro Litre (1*960) , Filter Tip 10 Micro Litre (1*960) , Filter Tip 200 Micro Litre (1*960) , Filter Tip 5 Micro Litre (1*960) , Floride Vial (Non Vacuum) , Floride Vial (Vacuum) , Gel Iec Pack , Glass Bottel Round , Glass Cover Slip 22 Mm , Glass Pipette 10Ml , Glass Pipette 2Ml , Glass Pipette 5Ml , Glass Slide , Glucostix 50 Sticks , Hand Sanitizer 5 Ltr (Ip Base) , Hb Pipette , Hb Tube , Hbsag Card , Hcv Rapid Card , Hiv Rapid Card , Insulated Sample Transportation Box , Lancet (Auto Destroyable/Safety Lancet) , Lancet (Twisted Round) , Leucoreduction Filter , Malaria Antigen Card , Mct Vials 1.5Ml , Mct Vials 2.0Ml , Measuring Cylender 20Ml , Measuring Cylender 100Ml , Measuring Cylender 500Ml , Measuring Cylender 1000Ml , Microscope Cover Glass 22 X 40 Mm , Multistix , N/10 Hcl 500Ml , Parafilm Tape , Pastuer Pipette , Ph Paper 5.0 To 7.5 , Plain Vial (Non Vacuum) , Plain Vial (Vacuum) , Ppe Kit (Citra & Drda Approved) , Pregnancy Cards , Ra Factor 50 Test Kits , Reversible Rack Mct , Rubber Teat For Pipette , Slide Storage Rack , Slide Storage Tray Pvc , Sodium Citrate Vials Non Vaccum , Sodium Citrate Vials Vaccum , Sodium Hypochloride 5 % 5 Ltr , Sst Vials Non Vaccum , Sst Vials Vaccum , Steel Rack For Test Tube 48 Hole , Sterile Swab Stick , Sterlum 500Ml , Stickers For Slide (Per Piece) , Test Tube Glass 12*100 , Test Tube Glass 12*75 , Test Tube Glass 15*150 , Test Tube Glass 25*150 , Test Tube Stand 1X 10 Slots , Test Tube 1X 30 Slots , Thermocol Box , Thermal Paper Roll , Tissue Paper Roll 20 Meter , Tourniquate , Sample Cup With Label (3 Screw, Sterile)/ Sputum Cup , Uristix 100 Strips , Vaccutainer , Vaccutainer Needle , Vtm Swab Stick (Standard Size) , Washing Brush . For Test Tube (Standard Size) , Widal Kit (Slide Method) , Wipes 1*280 Pc Lab Grade , Yellow Tips 1X1000 Nos , Zip Lock Pouch For 1 Ltr , Anti-D Igg 10 Ml , Anti-D Igm 10 Ml , Copper Sulphate Powder 500Gm , Dpx Mount , Ethanol Absolute , Fouchet Reagent , Giemsa Stain 125 Ml , Glacial Acetic Acid , H & E Stain (Haematoxillin Stain) , J.S.B 1 Stain , J.S.B 2 Stain , Lieshmen Powder 25 Gm , Lugal Iodine 125 Ml , Manual Rna Extraction Kit 50 Test (Icmr Approved) , Mathenol 2.5 Ltrs , Naoh Sodium Hydroxide , Oil Immersion 25Ml , Rapid Pap Stain Kit , Rapid Test Kit Igg, Igm, Ns1 For Dengue , Rtpcr Kits 96 Test For Covid-19 (Icmr Approved) , Siprit , Sodium Chloride , Sodium Dehydrogen Orthophosphate , Sodium Hydrogen Orthophosphate , Sodium Hypochloride 10% , Sulphar Powder 500 Gm , T3 Elisa (96 Test) , T4 Elisa (96 Test) , Tsh Elisa (96 Test) , Xylene , Anti Ab , Anti D ( Igg+ Igm) , Anti Human Sera/ Coombs Sera , Blood Grouping Plate , Bovine Albumin , Single Blood Bag 350 Ml , Triple Blood Bag 450 Ml , Double Blood Bag 350 Ml(Sagm) , Double Blood Bag 350 Ml , H.I.V Elisa 4Th Generation (96 Test) , Hb Strips , Hbsag Elisa 4Th Generation (96 Test) , Hcv Elisa 4Th Generation (96 Test) , Quadraple Blood Bags 450Ml , Single Blood Bag 350Ml , Vdrl Card , Absolute Alcohol 95% (500 Ml) , Acetone (500Ml) , Hiv Tridot Rapid Cards , Biological Indicator , Bunsen Burner , C.L.E.D Agar 500Gm , Carbol Fuchsin Powder (25 Gm) , Carbol Fuchsin (125 Ml) , Carbolic Acid 500Ml , Chemical Indicator , Concave Slide , Conical Flask 500Ml , Crystal Violet (125 Ml) , Cyto Brush With Spatula (100 Piece) , Glucose Broath , Gram Iodine Solution (125 Ml) , Haematoxylene Stain , Hydrogen Peroxide 3% (500Ml) , Indicator Tape For Steam Autoclave Process Verification , Kovacs Indole Reagent (100 Ml) , Lactose Monohydrate (500 Gm) , Leucoreduction Filter , Liquid Broath , Mac Conkey Agar 500Gm , Mac Conkey Broth Double Strength 500Gm , Methylene Blue 25 Gram (Powder) , Motility Test Medium , Mr Vp Medium 500Gm , Muller Hinton Agar 500Gm , Ph Strips , Sulphuric Acid 98.9% (500 Ml) , Xld Agar 500 Gm) , Xylose Lysine (100 Gm) , Young Broath Culture , Alp Kit , Aso Kit , Capillary Tubes For Ct(Pkts) , Cover Slip(Pkt.) Large(Pkts.) , Cover Slip Small (Pkts.) , Crp Kit , Diamond Pencil , Edta Vacutainer , Esr Tube , Filter Paper For Bt(Pkts) , Formalin (Ltrs.) , Glass Slide , Glucostrips , Grams Stain , Hemoglobin Strips/Hemoque , Ketac-Molar , Leishmans Stain , Lens Cleaner , Levolin Respules , Lugols Iodine , Mgg Giemsa Stain , Pap Smear Spectulla & Cyto Brush , Ph Strips(Pkts.) , Plain Vacutainer , Plastic Container For Urine , Pm Kits , Ra Kit , Rapid Pep Stain Kit , S.Albumin Kit , S.Calcium Kit , S.Protein , Semen Diluting Fluid (Bottles) , Sugar Kit , Suture (10.0) F 3719 Nylon , Toluidene Blue(500Ml.) , Torniquet , Tsh Card , Widal Kit , Zn Stain Kit , Micro Tips Large , Orthotoluedine Solution , Uristic , Lq080 10 Ml Cooked M Medium (10 Ml X 25) , Sterile Individual Packed Cotton Swabs , Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-10Ul , Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-20Ul , Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-200Ul , Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 100-1000Ul , Skirted Pcr Plate (96 Wells) , Sterile Transparent Sealant For Pcr Plate (96 Well) , Pcr Kits For Covid 19 Testing Compatible With Biorad Pcr , Mac Conkey Both Purple Single Strength W/ Bcp Media M 083 , Mac Conkey Both Purple Double Strength W/ Bcp Media M/96 , Elisa Ns1 Dengue Kit (96 Test) , Auromine - O (Per Gm) Powder , Broom Stick Stirrer(Pkt 100) , Heparin Lithimum Tube , Pernament Marker Pen Black , Methanol 5Ltr , Zip Lock Bag 20X25 Cm , Hydrochloric Acid (Mw36.46 ) , Slide Box (100 Slide Per Box) , Biohazard Symbol (Red) , Phenol Cristal , Cello Tape (5 Cm) , Potossium Permagnent (Kmno4) Cristal 50 Gm , Spirit Lamp , Spirit Alochloic , Squize Bottle (Small) , Squize Bottle (Big) , Ruber Band , Temp. Humidity Meter , Weighinj Scale Degital , Perafilm , Brosile Zar 5 Ltr , Brosile Zar 3 Ltr , Brosile Zar 500 Ml , Mac Conkey Broth Purple Single Strength W/ Bcp (Hi Media M083 1(500Gm.) , Mac Conkey Broth Purple Double Strength W/Bcp (Hi Media M 796 1(500 Gm.) , Ria- Tubes , Plastic Tube With Cap 2 Ml , Plastic Tube For Calcium Test , Bp Apparatus Digital , Bp Apparatus Marcury , Weighinj Scale For Blood Unit , Stethoscope , Dengue Ns1 Rapid Test Card , Dengue Igm+Igg Combo
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 11
25.
Educational and Research Institute #11047682 AOC
Supply Of It And Lab Equipment= 2 Computer Notebook Processor Make Intel/Amdprocessor Generation Min Intel 14Th Gen Core I5 / Amd Ryzen 5 8000 G Seriesnumber Of Cores Per Processor Min 4 Coreschipset Series Any Valuegraphics Type Integratedoperating System (Factory Pre-Loaded) Windows 11 Professional Type Of Ram Ddr5Ram Size (Gb) 8 Gb Minimumram Speed (Mhz) Min. 3200 Or Higherram Expandability Up To (Using Spare Dimm Slots In Gb) Min. 32 Gbcapacity Of Ssd (Gb) Min 512 Gb Ssdwireless Connectivity Integrated Gigabit Ethernetwi-Fi 6 Or Higher With Bluetooth Enabled 5.0 Or Higherled Backlight Monitor Size (Inches) Min 14 Inch With Integrated Cameradisplay Resolution (Pixels) Min. 1920 X 1080Panel Technology Ips/Tn/Wva Speaker, Wireless Connectivity, Ethernet Port 1 Qty, Bluetooth, Usb Port 2 Qty, Hdmi Port 1 Qty, Battery Warranty 5 Year, Web Camera Yeson-Site Oem Warranty 5 Year Onsite Oem Warrantyoem For Desktop Should Be Among The Listed Products In Gartner Magic Quadrant Or In Idc India Report During The Last 5 Years (In All Quarters) 3 Desktop Computer Processor Make Intel/Amdprocessor Generation Min Intel 14Th Gen Core I7 / Amd Ryzen 7 8000 G Seriesnumber Of Cores Per Processor Min 8 Coreschipset Series Compatible To The Required Configurationslots And Ports Minimum Requirement , Bidders Can Offer More As Per Their Product Designone Ethernet Rj-45One Display Portone Hdmione Audio Line Out3 Nos Usb 2.0 Ports4 Nos Usb 3.2 Ports (Including Type C)1 Pci Express X161 Pci Express X 11 M.2 Slots For Storagegraphics Type Integratedoperating System (Factory Pre-Loaded) Windows 11 Professional (Oem Declaration Regarding Genuine Activated Preloaded Windows 11 Professional) Type Of Ram Ddr5Ram Size (Gb) 16 Gb Minimumram Speed (Mhz) Min. 4800 Or Higherram Expandability Up To (Using Spare Dimm Slots In Gb) Min. 64 Gbcapacity Of Ssd (Gb) Min 512 Gb Ssdwireless Connectivity Integrated Gigabit Ethernetwi-Fi 6 Or Higher With Bluetooth Enabled 5.0 Or Highermonitor Size (Inches) Min. 23.8 Inch Or Higher And Should Be Same Oem For Which Desktop Is Offered, With Tco Certifieddisplay Resolution (Pixels) Min. 1920 X 1080Panel Technology Ips/Ledmouse Connectivity Wired Keyboard Connectivity Wired On-Site Oem Warranty 3 Year Onsite Oem Warrantycertification Bis, Ul, Rohs, Bee/Energy Star, Epr, Iso: 9001,Additional Requirement Bidder To Supply Factory Pre-Loaded Windows 11 Professional And Ms Office Academic Edition 2021 Along With Antivirus License Valid For 5 Years From Date Of Activation.Note: Licenses Of Software Shall Be Valid Till 5 Years Warranty. Bidder To Submit Confirmation From Microsoft To Supply Genuine License Software For All The Systems.Oem For Desktop Should Be Among The Listed Products In Gartner Magic Quadrant Or In Idc India Report During The Last 5 Years (In All Quarters)Audio With Built In Speaker In Monitor/Desktop 4 Computer Notebook Processor Make Intel/Amdprocessor Generation Min Intel 14Th Gen Core I7 / Amd Ryzen 7 8000 G Seriesnumber Of Cores Per Processor Min 8 Coreschipset Series Any Valuegraphics Type Integratedoperating System (Factory Pre-Loaded) Windows 11 Professional Type Of Ram Ddr5Ram Size (Gb) 16 Gb Minimumram Speed (Mhz) Min. 4800 Or Higherram Expandability Up To (Using Spare Dimm Slots In Gb) Min. 64 Gbcapacity Of Ssd (Gb) Min 512 Gb Ssdwireless Connectivity Integrated Gigabit Ethernetwi-Fi 6 Or Higher With Bluetooth Enabled 5.0 Or Higherled Backlight Monitor Size (Inches) Min 14 Inch With Integrated Cameradisplay Resolution (Pixels) Min. 1920 X 1080Panel Technology Ips/Tn/Wva Speaker, Wireless Connectivity, Ethernet Port 1 Qty, Bluetooth, Usb Port 2 Qty, Hdmi Port 1 Qty, Battery Warranty 5 Year, Web Camera Yeson-Site Oem Warranty 5 Year Onsite Oem Warrantyoem For Desktop Should Be Among The Listed Products In Gartner Magic Quadrant Or In Idc India Report During The Last 5 Years (In All Quarters) 5 Audio Visual Equipment Audio Visual Equipment In A Language Lab Enriching, Language Learning By Providing Engaging, Interactive, And Multi Sensory Experience 6 Recording Devices Recording Devices In A Language Lab Provide Valuable Opportunities For Listening, Speaking, Assessment, And Self Directed Learning They Enhance Language Acquisition By Offering Practice, Feedback, And Exposure To Authentic Language Content 7 Lcd Projector Type Of Display Poly Silicon Tft Active Matrixresolution 1024 × 768 Pixels (Xga) / 1280 × 800 Pixels (Wxga)Lens F= 1.80,Focal Length: 3.71 Mmcolor Reproduction Full Color, 16.77 Million Colorsbrightness Normal Power Consumption Mode:White Light Output 3100 Lumens (Iso 21118 Standard)Color Light Output 3100 Lumenseco Power Consumption Mode:White Light Output 1800 Lumens (Iso 21118 Standard)Contrast Ratio 3000 To 1 With Auto Iris On And Normal Power Consumption Modeimage Size 55.9 To 93.2 Inches (1.42 To 2.37 M)/ 60 To 100 Inches (1.52 To 2.54 M)Projection Distance 13.7 To 23.5 Inches (0.35 To 0.60 M)Projection Methods Front, Wall Or Ceiling-Mountedoptical Aspect Ratio(Width-To-Height) 4:3 Or Better Focus Adjustment Manualzoom Adjustment Digitalzoom Ratio(Tele-To-Wide) 1:1.35Internal Sound System 16 W Monauralnoise Level 35 Db (Normal Power Consumption Mode)28 Db (Eco Power Consumption Mode)Keystone Correction Angle Vertical: ± 5ºhorizontal: ± 5ºusb-B Port Compatibility Usb 1.1 And 2.0 Compliant For Usb Display Or External Mouseusb-A Port Compatibility One Usb 1.1 And 2.0 Compliant Port For Usb Device Input Or Epson Document Camera Display 8 Acoustic Panel1 Unit Type Piece2 Product Unit 100 Piece3 Color Black And White4 Product Type 3D Acoustic Wall Panel5 Application Floors & Roofs, Walls, Columns & Beams 9 Headphone, Microphone And Speaker Item Dimensions L Into W Into H7 Point 6 Into 4 Into 25 Point 8 Centimetresconnectivity Technology Wired 3 Point 5 Mmcolorblack 10 Upstechnical Specification Item Description Of Minimum Requirementrating In Kva (Kva) 2.0 Kvatechnology Igbt-Pwm With Or Without Inbuilt Isolation Transformerinput Power Single Phase 160V - 260V Signwave 50Hzinput Frequency Range 50 Hz +/- 6% Hzoutput Power Single Phase 230V +/-1%Output Frequency Range 50 Hz +/- 6% Hzout Wave Form Pure Signwavebackup Time (Minutes) Min. 60 Minutes On Full Loadminimum Vah (Vah) Min. Vah 3200Noise Level (1 Meter Distance Fro Ups) /=90%50% Overload Limit For Minimum 1 Minutes Yestotal Harmonic Distortion (Thd) (%) Maximum 3% 11 Multifunctional Laser Printer Printing Technology Lasercartridge Technology Cartridge Technology: Composite/ Separate Drum & Tonertype Of Printing Mono (Black Only), Duplexpaper Size A4/Legalduplexing Feature Yes For Both Print And Scanprint-Speed (A4) - Mono (Ppm) Min. 29 Ppm Or Higherscanning Feature Yesscan Auto Document Feeder Capacity Min. 30 Sheets Or Highermemory/Ram Size (Mb) Min. 256 Mb Or Highernetwork Connectivity Yestype Of Network Interface Ethernet 10/100Wireless Connectivity Yesno Of Paper Tray Min. 1Paper Tray Capacity Min. 150 Duty Cycle/Month (No Of Prints) Min. 20,000 Or Higher 12 Notice Board 3*4 Size Pinup Board 13 Sinewave Invertor 3 Kva With 150 Amp Tubular Battery With 2 Hr Backup Time Min 14 Led Screen 6X3 For Indoor 15 Led Screen 6X4 For Indoor 16 Digital Electronic Display Size 6*1.5 17 Bench Top Single Beam Uv Spectrophotometer 340-999 - Covers 190To 1100 Nm 4 Position Cuvette Holder Automatic Wavelength Selection 128X64 Graphical Lcd Printer Interface Usb Computer Interface With Professional Scanning Software Specifications : Wavelength Range : 190 - 1100Nm, Spectral Band Width : 18 Orbital Shaking Incubator: Size 580* 600 Mm Shaking Speed Range 20 To 250 Rpm Voltage 220-240V External Dimensions 800*1150*1300 Mm Chamber Volume 215 Ltrs 19 Manual Baby Mini Power Pack: Manual Bio World11 X 10 X 6 Cm (L X W X H)50 V100Ma 20 Mini Horizontal Gel Electrophoresis System: 1 Microtome Dimensions2. 300-400Mm3. Alloy Steel4. Min. 1Micron5. External Size 6.450Mm-350Mm 7.Thickness8.Max.60 Micron9.Trimming Thickness Range 10.10Um-40Um11.Vertical Stroke 21 Advance Rotary Microtomy (Latest Spencer ‘820’ Type ) (With Razer): 1. Microtome Dimensions2. 300-400Mm3. Alloy Steel4. Min. 1Micron5. External Size 6.450Mm-350Mm 7.Thickness8.Max.60 Micron9.Trimming Thickness 22 Compound Microscope: Type: Compound Microscopes.Head: Trinocular 30º. 360º Rotating. 48-75Mm Interpupilar. +/- 5Mm Diopter On Left Tube.Objective Magnification: Semi Plan 4X/0.10, 10X/0.25, S40X/0.65, Oil Immersion Objectives. 23 Laboratory Hot Air Oven: 1. Inner Size (Wxdxh)2.Heat Load3.0.75 Kw, 1.50 Kw, 2.25 Kw4.No. Of Shelves 2 5.Temperature Range 6.50Oc - 200Oc+/-2Oc 7.Insulation8.Mineral Wool9.Safety Device 10.Thermostat 11.Temperature Controller 12.Temperature Display13.By L-Shaped Glass Thermometer 14. Electrical Supply15. 220/230V Ac, 50/60Hz 24 Laboratory Eggs Incubator (Capacity 80 Lit):1.Temperature Range Ambient +5 To +90°C 2.Temperature Uniformity + / - 0.35°C At 37°C 3.Temperature Control Thermostat4.Display Thermometer5.Door Solid Door W/ Glass Window & Lock6.Exterior Ms Painted7.Interior Aluminum8.Safety Features Over-Temperature Thermostat9.Shelves Aluminum10.Power Supply 220 Volts 11. Optional - Caster Wheels12.Digital Timer 13.Fluorescent Lamp14. Incubation Of Co2 Air Mixture15.Combined Digital Temperature & Humidity Controller 25 Ph Meter (Digital) :1. Range Ph : 0 To 14Ph2. Mv Measurement : 0+/-1999 Mv3. Resolution Ph : 0.014. Accuracy Ph : 0.015. Calibration :Three Point Calibration6. Display : 4 Digit Led Display7. Power Supply: 230V Ac 50Hz +/- 10% 8.Temperature Range : 0 To 100 Degree C9. Standard Buffer Capsules : 4,7 &9.2Ph Buffer 4,7 &9.2 Supplied10. Operating Manual : Operating Manual 11.Electrode :1 Set Of Electrode, Stand & Clamp 26 Conical Flask 200 Ml :Insufficient Number Available 27 Electronic Balance : 1.Kern Pcb 6000-0Feature2.Ce Compliant Material3.Stainless Steel Platform4.Ac/Dc Input5.100 - 240 V Ac, Universal Plug Set 28 Gel Electrophoresis Assembly With Digital Power Pack :Dimension : 19.5Cm(L)X28.5Cm(B)X6.5Cm(H) Number Of Samples : 52Buffer Volume : 600Mlnumber Of Casting Tray :7X5Cm,13X6Cm,13X10Cm (1 No. Each) Number Of Combs : Multichannel Pipette Compatible Combs Height Adjustable Combs26-Wells 1.5Mm Thickness Comb (Well Width-3Mm,Interspace- 1.5Mm) (2 Nos.)No. Of Platinum Electrodes : Positive And Negative (Each One) Buffer Chamber With Safety Lid : 1 No.Gel Caster : 1 No. 29 Thermal Cycler :1.Europlug2.220-240 V, Europlug Feature3.Ce Compliant Usb Interface4.Eppendorf® 53840000125.Temp Measuring Range Accuracy: ±0.5 °C (At 20-45 °C) Parameter 6.24-100 °C Temp. Range7.300–1,500 Rpm Speed (Mixing)8. W × D × H 20.6 Cm × 30.4 Cm × 17.0 Cm9. Capacity 10 Holds 1 Block10.Stirrer Diam. 3 Mm Weight 6.3 Kg 30 Cooling Centrifuge :230 V Ac, Uk Plug Featurece Compliant To Hold 24 1.5/2.0 Ml Micro-Centrifuge Tubes Corning 6767-Hs Parameter 13300 Rpm16300 × G Technique(S) Centrifugation: Suitable L × W × H 23.5 Cm × 29.3 Cm × 21.6 Cm Weight 31 Gel Documentation Unit With Computer :64 Mega Pixel Camera 32 Micropipette :12 Channel10-100 Ltwelve Channel Variable Micropipette 0.5 Ml 33 Tips Of Micropipette :Round Polypropylene Tip100-1000Hl C3 Variable Volume Single Channel Micropipette Mechanical (02 Each) 34 Eppendorf Tubes :Safe Lock Tubes With Lid& Latch With Graduation Material Polypropylene(02 Each) 35 Pcr Tubes:Micro-Centrifuge Tube 0.2 Ml With Cap , Transparent , Pack Size - 1000 Pcs Thin-Wall Polypropylene Pcr Tubes With Attached Flip Caps For Labeling, Full-Height Wells. The Thin-Walled Polypropylene Tubes And Caps Have Tight Seals And Can Therefore Be Used For Low Reaction Volumes. 36 Deep Freezer: 1. Capacity Cooling (Ltrs) 5502.Temperature Range -18 Degree To -24 Degree C 3.Electrical Power Supply4.Electrical Power Supply Na5.Packing Delivery& Taxes 6.Capacity:527Liters. 7.Dimensions(Mm):920 8.Height X 1425 Width X 690 Depth 37 Laminar Air Flow :Material : Stainless Steel 38 Ph Meter1.Ph Range -2.00 To 16.00Ph.2.Big Screen & Large Lcd Display.3.With White Backlight.4.Memory - Up To 100 Readings.5.Usb Interface.6.0.01Ph Resolution.6. 3 Points Calibration 39 Soxhlet Apparatus With Heating Mantle:Item Weight 9 Kg 500 Gpackage Dimensions 67 X 34 X 31 Cm; 9.5 Kg 40 Autoclave :Surgical Sterilizer Aluminum Portable Auto Clave - 12X14 =24 Lt 41 Bottle Top Dispenser With Dual Inte Technology :Bottle Top Dispenser- Volume Range 0.5- 5 Ml Type Of Product : Ultimus Bottle Top Dispenser Coefficient Of Variation ±Ml 0.01 ±Mlambient Temperature : 20°C Increment : 0.1 Ml 42 Centrifuge :Item Weight 3 Kg 810 Gproduct Dimensions 20 X 21 X 26 Cm; 3.81 Kg Item Part Number Centfitem Height 26 Centimeters Item Width 21 Centimeters Wattage 150.00 43 Digital Chemical Balance :Surplus External Two Pan Laboratory Balance Weighing Scale Type- Bench Scale Material-Steelproduct Type Digital Analytical Balance Weighing Machine Monitor Display-Digitalpower Supply-Electric 44 Double Door Refrigerator :Net Total(Liter)322Net Width(Mm)600 Mmnet Case Height With Hinge(Mm)1715 Mmnet Depth With Door Handle(Mm)672 Mm Net Weight(Kg)59 Kg 45 D.O. Meter :Net Total(Liter)322Net Width(Mm)600 Mmnet Case Height With Temperature Range -5.0 To 50.0°C (23.0 To 122.0°F)Temperature Resolution 0.1°C (1°F)Temperature Accuracy ±0.2°C (±1°F) (Excluding Probe Error) Do Probe Hi 76407 With 4 M (13) Cable (Included)Automatic Shut-Off After Approx. 8 Minutesbattery Type/Life 1.5V Aa (4) / Approx. 500 Hours Of Use Environment 0 To 50°C (32 To 122°F); Rh Max 100% Dimensions 196 X 80 X 60 Mm (7.7 X 3.1 X 2.4 In.)Weight 500 G (1.1 Lb.) 46 Digital Ph Meter With Electrode (Lcd Display):1. Range Ph : 0 To 14 Ph2. Mv Measurement : 0+/-1999 Mv3. Calibration* :Three Point Calibration4. Buffer Recognition : Manual& Automatic5. Display : 4 Digit Led Display6. Parameters Displayed : Ph & Mv7. Power Supply : 230V Ac 50Hz +/- 10%8. Standard Buffer Capsules : 4,7 &9.2Ph Buffer 4,7 &9.2 Supplied9.Electrode :1 Set Of Electrode, Stand& Clamp 47 Digital Photoelectric Colorimeter :Type : Digital Photo Colorimeter Resolution : 0.01 Aabsorbance : 0- 1.99Aphoto Detector : Silicon Photodiode / Photo Cell Display : 2 Digit Led 48 Digital Potentiometer :Technical Specifications : Range 0 To  199.9 Mv 0 To  1999 Mv Resolution 0.1 Mv Repeatability  1 Mv Accuracy  1 Mv  1 Digit Operating Temperature 10 C To 45 C Display 3 Digit 0.5 Seven Segment Led Display With Auto Polarity Indication Power 230Vâ 10% Ac, 50 Hz. Dimensions 275 190 78Mm Weight2.5 Kg. (Approx) Standard Accessories Platinum Electrode : 1 No. Reference Electrode : 49 Distillation Apparatus:Spinning Band Typesteflon - Operates Up To 225 °C Stainless Steel – Operates Above 225 °C High Efficiency And High Temperature Bands Maximum Theoretical Plates Optional: 4 Place Or 8 Place Automatically Collect Fractions According To Vapor Temperature Vacuum Operation Optional Vacuum System 100-1 Mmhg Range Other Ranges Availableautomatic Control Of Vacuum Level. Vacuum Reduces Boiling Points. Ideal For Thermally Sensitive Samples Or High Boiling Materials Automatic Controller Provides Automatic Control Of The Entire Distillation Process Start The Distillation And Walk Away Pc Optional Control From Pc Perform A Distillation From A Pc Analyze Distillation Results Using Our “Data View” Program. Safety Marks Ce Marked Listed To Ul 6101.1 By Etl Listed To Csa C22.2 1010.1 By Etl C Tick (Australia/Nz)Safe For Laboratory Use Power (Distillation Unit Only) 1-22 Liter (115 V) 15 Amps 1-22 Liter (220 V) 8 Amps50 Liter (220V) 15 Amps Configured For Local Power Requirements And With Local Power Plug, 115 Or 220 V, 50/60Hz 50 Dryer And Temperature Controller :Applicationair Dryer & Freezers. General Specificationstemperature Range -50°C To 99°C.230Vac Standard. Other Models With 12Vdc, 24Vdc, 110Vac On Request. Panel Cutout: 29 X 71 Mm. Screw Terminals: Admit 1X2.5 Mm2 Wires. 51 Blower :Item Weight: 850 Gitem Dimensions Lxwxh: 20 X 40 X 20 Centimetres Net Quantity: 1 Countgeneric Name: Electric Air Blower 52 Chemical Thermometer :Included Components Thermometer Outer Material Glassspecification Met Ce Display Type Analogitem Length 30 Centimetersupper Temperature Rating 300 Degrees Celsius Response Time 500 Millisecondsreusability Reusableimmersion Depth 30 Centimeters 53 Calorie Meter Working (Operating) Temperature 15-70°Cresults Per Hour 10 Samples Per Hour Using 2 Oxygen Bomb Vesselsmeasuring Range Max 99Mj, 99,000,00 Joules Working Temperature Min 1°Cworking Temperature Max 50°C Oxygen Operating Pressure Max 40 Barbalance/Scale Interface Rs232, 1200 To 38400 Baud (Settable) 54 Beaker- 50Ml, 100Ml, 250Ml, 500Ml, And 1000Ml, Catering To Various Volume Crafted From High-Quality 3.3 Borosilicate Glass, The Low- Form Design With A Wide Base And Tapered Spout. 55 Funnel :A 125Mm Length Stem. Stem Has Diameter Measuring 16Mm. 56 Pipette :Laboratory Application Area, India Country Of Origin, 915 Mm Overall Length, Twisted Galvanized Iron Wire Material, 1 Pc Pack Of, Hard Nylon Bristles, 150X25 Mm Head Size. 57 Burette :Accuracy As Per Din Iso 385 Standardglass Key, 50 Ml Burette, Borosilicate Glass 3.3 Class-A, White Graduation 58 Burette Stand :Dimension Of Base: 300X150X30Mm. Rod: 700X10Mm. 59 Mortar Pestel:125Ml Capacity And Is 85 Mm In Diameter. The Pestle Is 95 Mm Long 60 Electronic Balance :Single Pan Balance 5 Weighing Capacity: 220 Gm Or More 6 Pan Size: 90 Mm In Diameter Or More 7 Display Readability : 0.1 Mg Or Less 8 Weighing Repeatability: +/- Transparent Three Door Draft Shield- Top As Well As Sides Sliding 17 Input Power Supply Requirements: 240 V 61 Burette Brush :915 Mm Overall Length, Twisted Galvanized Iron Wire Material, 1 Pc Pack Of, Hard Nylon Bristles, 150X25 Mm Head Size 62 Test Tube Brush :High Quality - Made Of Stainless Steel And Nylon Bristles Due To Which Easy To Clean, Will Not Rust. Durable, Strong But Soft Nylon Bristles For Cleaning. This Test Tube Brush Is Specialized Designed For Cleaning Bottle Neck Flasks. 63 Conical Flask :High Quality, Borosilicate 3.3 Glass Conical Flasks Lab Grade & Tested Glass 50 Ml Capacity 64 Volumetric Flask : Capacity Sg-100: 100Ml Sg-250: 250Ml Sg-500: 500Ml Sg-1000: 1,000Mlmaterial Glass Heat Resistance With Graduation 65 Wire Gauze: 120Mm*120Mm 66 Round Bottomed Flask Borosilicate Glass Is Type Of Glass With Silica And Boron Trioxide. Capacity 100 Ml Non Toxic 67 Periodic Table (Poster)140*100Cm 68 Gas Connection And Fitting In New Lab 250 Ft Gas Pipe Line With Rubber Pipe-100 Metre, Burner Brass- 48, Brass Gas Top Two Way 24, Copper Pipe-24 Copper Hos Pins- 24 Brass Line Volwes All With Isi Mark & Installation 69 Water Bath Digital :Water Bath With Selectable Openings 304 Stainless Steel 0.01.Resolution Electric Constant Temperature Water Bath For Lab Commerical.110V - 220V Lxt Panda Lxt Panda Digital Lab Water Bath, Thermostatic Water Bath With Selectable Openings 304 Stainless Steel 0.01.Resolution Electric Constant Temperature Water Bath For Lab Commerical.110V - 220Vless 70 Digital Ph Meter Range 015 Calibration-Ph Ut To 3 Pointtemperature Range 0 To 100C 71 Digital Blood Pressure Machine 1. A Digital Automatic Blood Pressure Monitor, Designed For Accurate And Convenient Monitoring Of Blood Pressure Levels At Home Or In A Clinical Setting.2. The Monitor Features A Large, Easy-To-Read Digital Display Screen That Shows Blood Pressure Readings. 72 Blower :Item Weight: 850 Gitem Dimensions Lxwxh: 20 X 40 X 20 Centimeters Net Quantity: 1 Countgeneric Name: Electric Air Blower 73 Single Needle Lock Stitch Sewing Machine : A3B Needle – Db×1 11-18# Auto Cutter – Yes Auto Reverse – Yes Thread Number – 2 Stitch Length (Mm) – 5 Height Of Pressure Foot – 5-13 Sewing Speed – 5000 Spm (Stitch Per Minute) A/M – Yes Volume (Mm) – 671 X 248 X 550 Power Consumption – 220 V Lubrication – Fully Automatic Lubrication 74 Over Lock /Inter Lock Sewing Machine :1.Application : Suitable For Light To Medium Fabric2.Stitch Type : Chain Stitch3.Needle Light : Led Type-3 Step 4.Differential Feed Ratio : 0.7 ~2.05.Needle System / Size : Dcx1# 9~146.Nos Of Loopers : 27.Nos Of Thread : 4 8.Lubrication Type : Automatic9.Stitch Length : 3.6 Mm10.Stitch Width : 4/6 Mm11.Feed Type : Differential 12.Pressure Foot Height : 5 Mm13.Up / Down Needle Position : Yes14.Sewing Speed Adjustments : Yes
Contract Date: May 18, 2026 Contract Value : 1.46 Crore
Local Bodies No of Bidders 4
Madhya Pradesh View Result →
26.
Housing Urban and Rular Development #10908306 AOC
Providing Basic Amenities And Beautification Of Dargoba Temple Campus, At-Dargoba Mandir, Pare, Tal-Khanapur, Dist-Sangli.-Cubic Metre Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Mechanical Means Cubic Metre Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (upto all leads and lifts) By Mechanical Means Cubic Metre Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed, excetra) (using ARTIFICIAL SAND). Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. with fine aggregate (Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND). Providing expansion joints in reinforced cement concrete framed structure (exterior column) with plain premoulded filler 25 milimetre thick with 75 milimetre wide and 1 milimetre thick stainless steel plate and finishing, excetra complete. (For Ground Floor) Providing second class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water manually, striking joints, on unexposed faces, racking out joints on exposed faces and watering, excetra complete. (using ARTIFICIAL SAND). Providing and laying cast in situ / Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, compaction, roughening if special finish is to be provided and curing excetra completet (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixe excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying cast in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete.With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying cast in situ / Ready Mix cement concrete M-25 of Trap / granite /quartzite/ gneissmetal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) using ARTIFICIAL SAND). Providing and laying in situ M-25 cement concrete of trap / granite / quartzite / gneiss metal with 15 percent plum of trap stones for retaining walls and jetty, excetra including necessary formwork, compacting, curing, bailing out water manually in tidal range, excetra complete. Providing and fixing in position thermo mechnically treated FE-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. For Ground Floor) Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water, striking joints on unexposed faces and watering, excetra complete. (using ARTIFICIAL SAND). Providing and fixing mild steel grill railing weighing 20 kilogram per square metre with polyvinyl chloride handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing polyvinyl chloride handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, excetra complete. (For Ground Floor) Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand / grit, ramming, watering, excetra complete. Filling in plinth and floors with contractors material / brought from outside and approved by Engineer In- Charge, in 15 centimetre to 20 centimetre layers including watering and compaction, excetra complete. Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying rubble stone flooring laid in cement mortar 1:3 as per drawing and technical specifications, excetra complete. (using ARTIFICIAL SAND). Providing sills of granite 20 milimetre to 25 milimetre thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard : 4923 YST 310 grade produced from iron ore and blast furnace route, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and painting complete. (For Ground Floor) 124610.70 Providing and fixing in position guard railing as per Drawing Number 15 type C dated 20-4-1979, with three rows of 40 milimetre diameter galvanised iron pipe 30 centimetre apart and fixed in mild steel channels of section 100 milimetre X 50 milimetre X 6 milimetre spaced 2.5 metre center to centre, 1:2:4 cement concrete bedding of size 45 centimetre X 30 centimetre X 30 centimetre as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. Providing leather finished polishing to granite stone slab by continuous grinding in four coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing, excetra complete. (For Ground Floor) Providing and applying priming coat over new / old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding, excetra complete. (For Ground Floor) Providing and applying two coats of lead / zinc base oil paint / bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface, excetra complete. (excluding primer coat). (For Ground Floor) Providing and laying in situ cement concrete M-30 with tremix treatment for 200 milimetre thickness for flooring with groove cutting of 4 milimetre wide 20 milimetre deep with necessary refilling with bitumen, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing auto closing pillar cock of pressmatic tap of approved make including all fixtures, fittings, excetra complete. (For Ground Floor) Providing and fixing 450 milimetre X 550 milimetre size superior type belgium mirror with 16 milimetre diameter nickel plated towel rod, excetra complete. (For Ground Floor) Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing 15 milimetre diameter ball cock medium type with polyvinyl chloride float including sockets and necessary fittings and tested as per municipal requirements, excetra complete. (For Ground Floor) Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 milimetre X 38 milimetre X 1.22 milimetre box type, 5 milimetre thick sheet glass louvers of approved quality, excetra complete. (For Ground Floor) Providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (For Ground Floor) Providing and fixing in position (as per Indian Standard 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts excetra complete. - With colour anodising without box. (For Ground Floor) Providing and fixing 30 milimetre thick polyvinyl chloride flush L door shutter consisting of panel of hollow polyvinyl chloride profile of 20 milimetre thickness consisting frame made out of mild steel tubes of 19 gauge thickness and size of 19 milimetre X 19 milimetre inserted inside the hollow section of stiles rails top and bottom rails and two milimetre X 19 milimetre mild steel tubes inserted horizontally inside the hollow profile section using 4/5 milimetre sheet using screws hollow profile shall be lipped with 10 milimetre (5 milimetre X 2) thick X 20 milimetre width on stiles and rails using solvent cement. The inner panel shall be laminated with 5 milimetre thick termite proof waterproof plain / prelam poly vinyl chloride sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening excetra Complete as per direction of Engineer in-charge, manufacturer’s specification and drawing. (For Ground Floor) Providing and fixing Orissa type colour glazed earthenware 625 milimetre X 450 milimetre water closet including trap, cast iron soil and vent pipe upto the out side face of wall including 100 milimetre diameter cast iron plug bend, 15 milimetre thick 10 litre polyvinyl chloride flushing cistern with all necessary pipe connection, excetra complete. (For Ground Floor) Providing and fixing oval type under counter wash hand basin of 16 inch X 22 inch size and of special colour shed having telephonic black / colour granite of 18 milimetre thick fixed on black kadapaa frame work, including cromium plated coupling, bottle-trap using approved make oval type wash basin as per detailed drawing or as directed by Engineer In-charge, excetra complete. (For Ground Floor) Providing and fixing 15 milimetre diameter screw down bib / stop tap of brass including necessary socket union nut complete. (For Ground Floor) Providing and fixing Ivory glazed earthenware full stall type urinal with poly vinyl chloride flushing cistern of 5 litres capacity with fitting inlet pipes and stop tap brackets for fixing the cistern 32 milimetre diameter poly vinyl chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection upto the outside face of the wall. (For Ground Floor) Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 centimetre to 20 centimetre thick including hand packing and compacting, excetra complete. Providing first class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 including scaffolding, racking joints pointing in cement mortar 1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying damp proof course 50 milimetre thick in M-20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compacting, excetra complete. Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55 percent aluminium, 43.4 percent zinc, 1.6 percent silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25- 30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturers product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre). (For Ground Floor) Providing internal cement plaster 12 milimetre thick in a single coat in cement mortar 1:5 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. (For Ground Floor) Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Providing and applying plastic emulsion paint of approved quality, colour and shade to new surfaces in three coats including scaffolding, preparing the surfaces (excluding primer coat), excetra complete. Providing and fixing Indian teak wood eaves boards 15 centimetre wide and 25 milimetre thick plain decorative type including scaffolding and painting with two coats, excetra complete. (For Ground Floor) Providing and laying cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed)With fine aggregate ( Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying rough shahabad stone flooring 50 milimetre to 60 milimetre thick and of required width in plain / diamond pattern on a bed of 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / burnt brick masonry and or tying by binding wire, excetra complete. (For Ground Floor) Providing and applying spray plaster made with finelly graded marble and quartz in 2 milimetre thickness in two coats using putty knife or trowel to newly plaster fairly even surface after minimum 30 days gap, in all positions including finishing the surface using zero number sand paper or fine emry paper gently level the area by moving paper in round circles removing the dust and clean the surface with dry cloth and scaffolding including all materials and labour, excetra complete. (For Ground Floor) Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing groove to required size at specified location as directed by Engineer, at junction of brick masonary wall and reinforced cement concrete beams or column, at junction of composite masonary, including scaffolding, finishing curing, excetra complete. Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth approved make excetra complete. (For Ground Floor) Providing and fixing false ceilling of plain asbestos cement sheets 4 milimetre thick with teak wood beadings 45 milimetre X 12 milimetre thick frame work of counrtry teak wood battens of size 70 milimetre X 60 milimetre at 1.00 metre center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to asbestos cement sheet and beading in two coats, excetra complete. excluding teak wood runner to be paid seperately). (For Ground Floor) Providing and laying in position flooring of telephone black amba white / cadbury brown / RBI red / ocean brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on a bed of 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3, curing and cleaning, excetra complete. (For Ground Floor) using ARTIFICIAL SAND). Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 milimetre thick and 75 centimetre high vertical support for Kadappa at one metre center to center of 25 milimetre thick both side polished Kadappa middle shelf and bottom of 20 milimetre thick one side polished Kadappa with facia patti of 20 milimetre X 50 milimetre Kadappa including all material, labour, cutting, fixing with cement mortar and araldite, all material labour cutting fixing with cement mortar and araldite curing polished and cleaning excetra complete. (For Ground Floor) Providing and fixing on walls / celling / floor, 15 milimetre diameter chlorinated polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) Providing and fixing on walls / celling / floor, 25 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) Providing and laying in trenches 15 milimetre diameter chlorinated poly vinyl chloride pipe including necessary excavation, fittings, refilling trenches, excetra complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. Providing and laying ceramic tiles of having sizes 30 centimetre X 45 centimetre and confirming corrosponding Indian standared for dado and skirting required position with ready made adhesive mortar approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry, cleanding, curing, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing screw down 15 milimetre diameter wheeled stop tap of brass including necessary sockets union nut complete. (For Ground Floor) Providing and fixing 10 centimetre cast iron nahani trap including cast iron grating, bend and piece of cast iron pipe upto the outside face of the wall complete. (For Ground Floor) Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at one kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre X 300 milimetre, making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Provoding and fixing high density polyethylen container one piece moulded water tank made out of high density polyethylen and built corrugated inclusive of delivery upto destination housing, fixing of accessaries such as inlet, outlet, overflow pipe inclusive of all Taxes - Capacity between 1000 litres to 20000 litres. (For Ground Floor) Providing and fixing poly vinyl chloride rain water pipes of 160 milimetre outer diameter and having wall thickness of 2.2 milimetre to 2.7 milimetre confirming to Indian Standard : 13592-1992 including proper rain water receiving recess with poly vinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall affixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the poly vinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge excetra complete. (For Ground Floor) Total-A Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune. Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Artificial Sand Compressive Strength of Cement Concrete Cube Sieve Analysis Test for Metal below 40 milimetre Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre Flekiness & Elongation Test for Metal below 40 milimetre Concrete Mix Design (with all tests on basic materials) for Grade M-25 Water Absorption, Compressive Strength, Efflorescence Test for Burnt Bricks Compressive Strength of Cement Mortar Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Sand Crushing Value / Compressive Strength, Water Absorption, Specific Gravity Test for Stone / Rubble Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar upto 16 milimetre) Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar above 16 milimetre) Liquid Limit & Plastic Limit for Plinth Filling Soil/Murum Compaction test (Proctor Density) Soil/Murum Compaction test Density by Sand Replacement Method Concrete Mix Design (with all tests on basic materials) for Grade M-30 Thickness, Mass per Running Metre of Aluminium Section Water Absorption, Modulus of Rupture Test for Ceramic / Vitrified Tiles Water Absorption, Modulus of Rupture Test for Natural stone/Kota/Marble/Granite/Tandoor etc) Wood density ,Moisture content Test Total B Total A+B
Contract Date: Apr 29, 2026 Contract Value : 2.65 Crore
Government Departments No of Bidders 1
Maharashtra View Result →
27.
Power #10907633 AOC
Construction Of New Test Lab Building At 33/11 Kv Sub Centre, Fatehabad And Other Related Civil Works. - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: (DSR 2.1) All kinds of soil (DSR 2.1.1) 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (DSR 2.6) All kinds of soil (DSR 2.6.1) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(DSR 2.8) All kinds of soil. (DSR 2.8.1) 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (DSR )(DSR 2.25) 5 Excavating, supplying, stacking and filling of local earth (excluding royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. NSI Based on(DSR 2.25(a)) 6 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (DSR 2.26) All kinds of soil (DSR 2.26.1) 7 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (DSR 2.28) All kinds of soil (DSR 2.28.1) 8 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (DSR 2.3) All kinds of soil (DSR 2.30.1) 9 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.31) 10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.2) 11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.3) 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8) 13 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.2.2) 14 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.2.3) 15 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Foundations, footings, bases for columns (DSR 4.3.1) 16 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) (DSR ) (DSR 4.10) 17 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. (DSR )(DSR 4.12) 18 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (DSR 5.1) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.1.2) 19 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (DSR 5.2) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2) 20 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.3) 21 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Suspended floors, roofs, landings, balconies and access platform (DSR 5.9.3) 22 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Shelves (Cast in situ) (DSR 5.9.4) 23 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR 5.9.5) 24 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Columns, Pillars, Piers, Abutments, Posts and Struts (DSR 5.9.6) 25 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Stairs, (excluding landings) except spiral-staircases (DSR 5.9.7) 26 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like (DSR 5.9.15) 27 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Edges of slabs and breaks in floors and walls 5.9.16 Under 20 cm wide (DSR 5.9.16.1) 28 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Weather shade, Chajjas, corbels etc., including edges (DSR 5.9.19) 29 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.12) 30 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.13) 31 Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR )(DSR 5.15) 32 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. (DSR 5.22) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6)/ (DSR 5.22A.6) 33 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) 34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2) 35 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) 36 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2) 37 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (DSR 6.13) Cement mortar 1:4 (1 cement :4 coarse sand) (DSR 6.13.2) 38 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab upto 0.50 sqm (DSR 8.2.1.1) 39 (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab over 0.50 sqm (DSR 8.2.1.2) 40 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (DSR 8.3) Granite work (DSR 8.3.2) 41 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (DSR )(DSR 8.4) 42 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR )(DSR 8.5) 43 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (DSR )(DSR 8.6) 44 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (DSR 8.14) Red sand stone - exposed face fine dressed with rough backing. 8.14.1 30 mm thick (DSR 8.14.1.5) 45 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : (DSR 8.28) Decorative veneer facings of approved manufacture (DSR 8.28.1) 46 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 18 mm thick (DSR 8.30.1) 47 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 25 mm thick (DSR 8.30.2) 48 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 8.31) 49 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR 9.1) Sal wood (DSR 9.1.2) 50 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 35 mm thick shutters (DSR 9.5.1.1) 51 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 30 mm thick shutters (DSR 9.5.1.2) 52 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (DSR 9.7) Second class teak wood (DSR 9.7.1) 53 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 35 mm thick (DSR 9.9.1.1) 54 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 30 mm thick (DSR 9.9.1.2) 55 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) (DSR 9.11) 5.0 mm thick(weight not less than 12.50 kg per sqm) instead of 4 mm thick(weight not less than 10 kg per sqm). (DSR 9.11.1) 56 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). (DSR )(DSR 9.12) 57 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). (DSR )(DSR 9.14) 58 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Panelled or panelled & glazed shutters : 9.16.1 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.1.2) 59 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Glazed shutters : 9.16.2 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.2.2) 60 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 12 mm thick (DSR 9.17.1) 61 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 18 mm thick (DSR 9.17.2) 62 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2) 63 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x12 mm (DSR 9.40.2.1) 64 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 25 mm dia (heavy type) (DSR 9.47.2) 65 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to steel windows by welding (DSR 9.48.1) 66 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 125x65x2.12 mm (DSR 9.57.1) 67 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 100x58x1.90 mm (DSR 9.57.2) 68 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 75x47x1.70 mm (DSR 9.57.3) 69 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 250x16 mm (DSR 9.62.2) 70 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 200x10 mm (DSR 9.63.2) 71 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 150x10 mm (DSR 9.63.3) 72 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 125 mm (DSR 9.66.1) 73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 100 mm (DSR 9.66.2) 74 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 75 mm (DSR 9.66.3) 75 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.1) 76 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.15.2) 77 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (DSR 10.16) Electric resistance or induction butt welded tubes (DSR 10.16.3) 78 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. (DSR )(DSR 10.17) 79 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR )(DSR 10.18) 80 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2) 81 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR )(DSR 10.28) 82 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (DSR 10.29) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides (DSR 10.29.2) 83 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (DSR 10.3) 4.0 mm thick glass panes (DSR 10.30.1) 84 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. (DSR )(DSR 11.2) 85 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 11.3) 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) 86 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (DSR 11.26) 25 mm thick (DSR 11.26.1) 87 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR )(DSR 11.27) 88 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR )(DSR 11.37) 89 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. (DSR 11.41) Size of Tile 600x600 mm (DSR 11.41.2) 90 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (DSR 11.48) Size of Tile 600x600 mm (DSR 11.48.2) 91 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (DSR 12.41) 110 mm diameter (DSR 12.41.2) 92 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 75 mm (DSR 12.42.1.1) 93 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 110 mm (DSR 12.42.1.2) 94 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (DSR 11.56) Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent (DSR 11.56.1) 95 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloyIS designation31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). (DSR 12.64) 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. (DSR 12.64.1) 96 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) 97 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:6 (1 cement: 6 coarse sand) (DSR 13.4.2) 98 15 mm cement plaster on rough side of single or half brick wall of mix:CEMENT PLASTER (IN COARSE SAND) (DSR 13.5) 1:4 (1 cement: 4 coarse sand) (DSR 13.5.1) 99 15 mm cement plaster on rough side of single or half brick wall of mix:CEMENT PLASTER (IN COARSE SAND) (DSR 13.5) 1:6 (1 cement: 6 coarse sand) (DSR 13.5.2) 100 12 mm cement plaster finished with a floating coat of neat cement of mix : (DSR 13.7) 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) 101 6 mm cement plaster of mix : (DSR 13.16) 1:3 (1 cement : 3 fine sand) (DSR 13.16.1) 102 Neat cement punning. (DSR )(DSR 13.18) 103 Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. (DSR ) (DSR 13.20) 104 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (DSR )(DSR 13.21) 105 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : (DSR 13.41) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre (DSR 13.41.1) 106 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.46) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.46.1) 107 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR )(DSR 13.80) 108 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour(DSR 13.81) Old work (one or more coats) (DSR 13.81.1) 109 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR )(DSR 13.88) 110 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR )(DSR 13.91) 111 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (DSR 13.99) One or more coats on old work (DSR 13.99.1) 112 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR 13.111.1) 113 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2) 114 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.5.1) 115 Renewal of old putty of glass panes (length) (DSR )(DSR 14.9) 116 Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR )(DSR 14.79) 117 Providing & fixing White vitreous china water closet squatting pan (Indian type) along withS or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (DSR 14.8) Orissa pattern W.C Pan of size 580x440 mm (DSR 14.80.2) 118 DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR )(DSR 14.82) 119 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (DSR 15.2) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (DSR 15.2.2) 120 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR )(DSR 15.3) 121 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7) In cement mortar (DSR 15.7.4) 122 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): (DSR 15.8) From brick work in cement mortar (DSR 15.8.3) 123 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area 3 sq. metres and below (DSR 15.12.1) 124 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.19) 125 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : (DSR )(DSR 15.24) 126 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) G.S. Sheet (DSR 15.28.1) 127 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR )(DSR 15.52) 128 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR )(DSR 15.56) 129 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. (DSR )(DSR 15.58) 130 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR )(DSR 15.60) 131 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. (DSR )(DSR 16.42) 132 Extra for providing and mixing hardening compound of approved quality as per manufacturers specification in cement concrete. (DSR )(DSR 16.44) 133 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR )(DSR 16.53) 134 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR )(DSR 16.68) 135 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (DSR 16.7) Made of G.I. wire of dia 4 mm (DSR 16.70.1) 136 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). (DSR )(DSR 16.75) 137 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. (DSR )(DSR 16.76) 138 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (DSR 16.78) With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 (DSR 16.78.2) 139 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR 16.91.1) 140 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (DSR 16.91.2) 141 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR 17.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR 17.1.1) 142 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (DSR )(DSR 17.7A) 143 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 550x400 mm (DSR 17.25.2) 144 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Semi rigid pipe 17.28.1 32 mm dia (DSR 17.28.1.1) 145 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR )(DSR 17.31) 146 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (DSR 17.69.1) 147 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 20 mm nominal dia Pipes (DSR 18.8.2) 148 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 25 mm nominal dia Pipes (DSR 18.9.3) 149 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 20 mm nominal bore (DSR 18.15.2) 150 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 20 mm nominal bore (DSR 18.16.2) 151 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 25 mm nominal bore (DSR 18.17.1) 152 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 20 mm nominal bore (DSR 18.17.1A) 153 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 32 mm nominal bore. (DSR 18.17.2) 154 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 20 mm nominal bore (DSR 18.21.1.2) 155 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 20 mm nominal bore (DSR 18.21.2.2) 156 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR )(DSR 18.48) 157 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (DSR )(DSR 18.65) 158 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : (DSR 19.5) 100 mm diameter (DSR 19.5.1) 159 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.1.1) 160 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.1.2) 161 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.1.3) 162 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1) 163 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.2.2) 164 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.2.3) 165 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (DSR 21.3.1) 166 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR 21.3.2) 167 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (DSR 21.3.3) 168 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With stainless steel cover plate minimum 1.25 mm thickness (DSR 21.4.1) 169 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With brass cover plate minimum 1.25 mm thickness (DSR 21.4.2) 170 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). (DSR )(DSR 21.5) 171 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. (DSR )(DSR 21.6) 172 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR )(DSR 21.18) 173 Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq mm frls pvc insulated copper conductor single core cable in surface /recessed medium class pvc conduit , with modular switch ,modular plate, suitable GI box and earething the pint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (DSR E&M 1.10)Group A (DSR E&M 1.10.1) 174 Wiring for light/power plug with 2x4 sq. mm FRLS PVC insulatted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR E&M 1.12) 175 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x2.5sq. Mm + 1x2.5 sq. mm eartrh wire (DSR E&M 1.14.2) 176 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x4sq. Mm + 1x4 sq. mm eartrh wire (DSR E&M 1.14.3) 177 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR E&M 1.21) 25mm (DSR E&M 1.21.2) 178 Supplying and fixing 6way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on Surface/recess,complete with tinned copper bus bar, heutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But with MCB/RCCB/Isolator) (DSR E&M 2022 2.3.1) 179 Supplying and fixing 5 amps to 32 amps rating,Single pole, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.10.1) 180 Supplying and fixing 63 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DSR E&M 2022 2.12.2) 181 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2022 5.2) 182 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required (DSR E&M 2022 19.1) 183 Concrete with 4cm gauge I class brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) 184 Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20) 185 Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) 186 Brick work in Super structure with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.19) 187 S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) 188 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29 c) 110 mm dia 189 Supply and fixing of power plug with 15A/250 voltflushtype switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mmsize with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 2018 PWD 1139 190 Supply and fixing ofLED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 2018 PWD 1413(A)CAT AA 191 S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) 192 S/F of 07 Watt LED bulb Syska or other equivalent make including cost of labour, T&P etc required for proper completion of the work (NSI) 193 Providing and lowering of 32 mm dia. uPVC column pipe Finolex/Ashirwad or equivalent make with column coupling socket etc. including cutting the pipe of required length, proper jointing the same including cost of all materials, labour, T&P etc required for proper completion of work.(NSI) 194 Supply and fixing support clamps for 32mm dia column pipes made out of MS flats, pairs of bolt-nuts etc complete with all material, labour, T&P. (CSI No. 19.24 e) 195 Supply & installation of electrical control panel of L&T / Havells or equivalent make for 1.5/2.00 pump set single phase submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31b) 196 Supply & Installation of 2.00 HP outlet 40mm dia. or more, Head 89/45, Discharge 2000/6000 LPH submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32c) 197 Supply and fixing of 2.5 mm2 for pump above 1 HP and up to 3 HP submersible cable Havels or equivalent make, for submersible pump complete in all respect. (CSI No. 19.33b) 198 Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34) 199 Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost when steel is to be provided by the department. (CSI No. 9.02) 200 Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b) as above but for 100 mm.PVC trap. 201 Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) 202 Providing and fixing 15 mm thick Industrial tiles size 600 x 600 mm to of Johnson Endura Meteor or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(NSI) 203 Providing and fixing 12 mm thick Industrial tiles size 300 x 300 mm or more of Kajaria or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (NSI) 204 Water proofing treatment over Roof, wall, Chajjas, Balcony etc. with Engineer Plus 7 layer waterproofing system at leakage, seepage area consisting of Surface preparation roughening of surface, opening of cracks in V groove in size of 5 mm to 10 mm width, Back filling of cracks with SBR Latex, 2 layer Spraying Mixture of Aquasil-99 and Aquaprime-99 (Take 20 liter clean water+ 1 liter Engineer Plus Aquasil-99 + 2 liter. Engineer Plus Aquaprime-99 in proportion 20:1:2 This solution should not sprayed over more than 40 sqm area, 3rd Laying 90GSM fiber glass mesh with proper overlap, 4th coat of brushable mortar prepared with Engineer Plus Aquaprime-99, water & cement (Aquaprime -99 @ 0.45 kg per sqm, water @0.45 kg per sqm & cement @0.68 kg per sqm.) in the proportion of 1:1:1.5 by weight, After 4th coat allow the coating to air cure for minimum four hours, after 4 hours interval apply, 2 coat of Flexicoat-99 mixed with Water (Flexicoat-99 @0.33 kg/sqm, water @0.66 Kg per Sqm) in the proportion of 1:2 by weight in 4 hours interval. After 6th coat allow the coating to air cure for minimum 4 hours. After 4 hours interval apply, 7th coat of Engineer Plus smartcoat-99 (Smartcoat-99 @ 0.45 Ltr/sqm & water @ 1.35Ltr/sqm in the proportion of 1:3). The surface will dry within 2 hours and surface would be fully water proof and usable after a period of 24 hours and the final appearance of the coating will be gray/milky white. The rates are included the cost of all chemicals, labours, and Required T&P for Proper completion of Work.
Contract Date: Apr 29, 2026 Contract Value : 36.93 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
28.
Housing Urban and Rular Development #10803700 Price Bid
E-Quotation No.5 For 2022-23 E Rate Quotation For Preparation Of Ssr For Various Item Which Is Mention In Notice , For Steel Structure / Tmt -Providing & Applyingduraclean- Wris An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coat Is Done Which Is Named As Duraguard A 3 Pack System , This Is A Blend Of Water Miscible Epoxy Andgives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance Etc.As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) For Concrete Surface -Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 10 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kleox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Scaffolding, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Grouting By Polyceramic Cementitious Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicgrout G 06 + 53 Grade Cement + Water As Per Requirementto Reduce The Porosityof Concrete / Masonry Structure And To Increase The Strength Of Structure Usinggrouting Pipes, Grouting M / C, Mixer Etc And All Relevant Safety With All Leads And Lifts, Material, Machinery, Labour, Scaffolding Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Top Terrace Waterproofing -- Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Waterproofing Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Waterproofing Of Concrete Surfaces Of Terrace To A Thickness Upto 5 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Of Existing Terrace Surface Upto Mother Slab Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. After Picc Apply A Poly Ceramic Cementitious Top Coat I.E Niccoat Pc + Kelmer A 60Of Dimple Chemicals & Services Pvt. Ltd After Finishing, After Top Coat Application, Pcc Will Be Done Up To 50 Mmthickness ( Or As Per Site Condition ) Of Desire Slope To Drain The Water And Kept Ponded For Continuous Period Of 3 Days To Detect Any Seepage / Leakage / Dampness If Any, The Surface Then Shall Be Cleared, Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Scaffolding, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 10 Mm Or As Per Surface Conditions Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, After Picc Apply A Poly Ceramic Cementitious Top Coat I.E Niccoat Pc + Kelmer A 60 Of Dimple Chemicals & Services Pvt. Ltd After Finishing It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Grouting By Polyceramic Cementitious Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicgrout G 06 + 53 Grade Cement + Water As Per Requirementto Reduce The Porosityof Concrete / Masonry Structure And To Increase The Strength Of Structure Usinggrouting Pipes, Grouting M / C, Mixer Etc And All Relevant Safety With All Leads And Lifts, Material, Machinery, Labour, Scaffolding Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Removal Of Vegetation / Plants:- Removal Of Vegetation & Plants By Its Roots From The Entire Surface Of Bridge With Manual Or Mechanical Means. After Removal Of Vegetation & Plants, Roots Shall Be Treated With Special Chemical I.E. Steripure Mbt 20 Of Dimple Chemicals & Services Pvt. Ltd. Top 50 Mm Shall Filled With High Strength Grout ( Nicgrout G 06Ofdimple Chemicals & Services Pvt. Ltd+ Cement 53 Grade ) Including Cost Of All Material, Machinery, Labour, Scaffolding, Etc.As Per Specification And As Directed By Engineer-In-Charge. , Providing & Applyingduraclean- Wris An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coat Is Done Which Is Named As Duraguard A 3 Pack System , This Is A Blend Of Water Miscible Epoxy Andgives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance Etc.As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 10 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas, Lift Jointsetc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Scaffolding, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Road Surfaces To A Thickness Upto 15 Mm Or As Per Surface Conditions And Also Treatment Of Pot Holes, Cracksetc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Keloxr 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar.Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 25 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Keloxr 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar.Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing And Applying Poly Ironite Ceramic Cementitious ( Picc ) Ofdimple Chemicals & Services Pvt. Ltd Ensure Self Curing, High Abrasion Resistant, Non-Shrink, High Compressive Strength, Low Porosity, Uv Resistant Coating Mortar On Existing Well Gsb Of 100 Mm Thickness, Get Compacted Andlevelled , Cure The Surfacethen Applyingself Curing Coating Picc Mortarin Properation Of 1;1 ( Nicomix Series : Metal ) For 50 Mm Thickness After Stamp The Surface By Special Concrete Stamping Mould As Per Specified Texture And Colour Etc. Next Day Apply Finish Coat Of Kelmer A60 Of Dimple Chemical & Services Pvt. Ltd Complete With All Leads And Lifts, Material, Machinery, Labour Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. ( Note- Gsb , Colour & Stamping Rates Not Included In This Ra ) , Masonry Bridge Repair Work:- Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For T-Pointing To A Depthupto 50 Mm Or As Per Surface Conditions And Raised On Stone Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Joints With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Top Coat Will Be Done With Kelmer A 60 + Niccoat Pc On Picc To Seal The Surface And Reduce The Porosity Etc Complete As Per Specification Including Cost Of All Material, Machinery, Labour, Scaffolding, Transportation Etc. With All Leads And Lifts As Directed By The Engineer-In-Charge. , Providing & Grouting By Polyceramic Cementitious Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicgrout G 06 + 53 Grade Cement + Water As Per Requirementto Reduce The Porosityof Concrete / Masonry Structure And To Increase The Strength Of Structure Usinggrouting Pipes, Grouting M / C, Mixer Etc And All Relevant Safety With All Leads And Lifts, Material, Machinery, Labour, Scaffolding Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Removal Of Vegetation / Plants:- Removal Of Vegetation & Plants By Its Roots From The Entire Surface Of Bridge With Manual Or Mechanical Means. After Removal Of Vegetation & Plants, Roots Shall Be Treated With Special Chemical I.E. Steripure Mbt 20 Of Dimple Chemicals & Services Pvt. Ltd. Top 50 Mm Shall Filled With High Strength Grout ( Nicgrout G 06Ofdimple Chemicals & Services Pvt. Ltd+ Cement 53 Grade ) Including Cost Of All Material, Machinery, Labour, Scaffolding, Etc.As Per Specification And As Directed By Engineer-In-Charge. , Providing & Applyingduraclean- Wris An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Filling Potholes For Concrete & Bitumen Roads To A Thickness Upto 75 Mm In A Ratio Of 1:1 ( Picc Mortar1 Part: Metal 6Mm 1Part ) Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Add Nikure 500 In To Above Morter For Normal Setting Of Dimple Chemicals & Services Pvt. Ltd. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Filling Potholes For Concrete & Bitumen Roads To A Thickness Upto 75 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Add Nikure 500 Of Dimple Chemicals & Services Pvt. Ltd. On Above Mortar Picc Will Be Ready To Traffic Load After 1 Hr Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing And Applying 30 Mm Thick Self Curing Ceramic Polymer Microconcrete Of Dimple Chemicals & Services Pvt. Ltd. Having Compressive Strength Above M30, Non Shrink, Impermeable, Filling Mortar In Cavities Like Beams, Column Etc. To Load Carrying R.C.C Member In One Or Two Layers ( Depending Upon The Site Condition ) On Cleaned Concrete Surface , Includinghoney Comb Area ( Using Manual / Mechanical Means ) . Mixingmortar Of Nicocil C80 And Fresh 53 Grade Cement With Required Water Cement Ratio For Desired Consistency And Applying And Finishing By Manual Trowelling , Curing After Curing Initial Setting Time Etc, As Per Manufacturers Specification Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Kelox R 101 ( Resin ) + Kelox H 404 ( Hardener ) A Water Miscible Epoxy Of Dimple Chemicals & Services Pvt. Ltd. For Bonding Old Concrete To New Picc Mortar, After Mixing Slowly In Predefined Ratio And Applying By Brush On The Surface. When It Is Tacky Then Apply The Picc Mortar Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coat Is Done Which Is Named As Duraguard A 3 Pack System Of Dimple Chemicals & Services Pvt. Ltd., This Is A Blend Of Water Miscible Epoxy Andgives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance Etc. Wrapping Will Be Done With Duramesh Of Dimple Chemicals & Services Pvt. Ltd. After 2 To 3 Hrs Of Wrapping Apply Final Coat Of Duraguard When Surface Is Tacky. This Coats Will Give The Thickness Approx. 350 Micron, As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coating Is Done Which Is Named As Bituminous Epoxy Of Dimple Chemicals & Services Pvt. Ltd. A 2 Pack System, Kelox Rb5050 & Kelox Rh4040 This Is A Blend Of Rapid Setting Bitumen Emulsion And Water Miscible Epoxy I.E. Modified Epoxy Resin And Special Hardener. Wrapping Will Be Done With Duramesh Of Dimple Chemicals & Services Pvt. Ltd. Gives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As Abrasion & Impact Resistance Followed By Top Coat With Bituminous Epoxy. This Coating Gives Better Performance As Compare To Coatings Specified In Is 10221 . Apply 2 Coats With A Thickness 1Mm ( Bituminous Epoxy + Duramesh+ Bituminous Epoxy ) As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) After Primer Application Final Coating Is Done Which Is Named As Bituminous Epoxy Of Dimple Chemicals & Services Pvt. Ltd. A 2 Pack System Kelox Rb 5050 Kelox Rh 4040, This Is A Blend Of Rapid Setting Bitumen Emulsion And Water Miscible Epoxy I.E. Modified Epoxy Resin And Special Hardener. Apply 2 Coats With A Thickness Of 300 Micron On Prepared Metal Surface Etc. It Gives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance, Corrosion Protection Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface . Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. Also Reduces Frictional Resistance To Flow Of Water. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Water Proofing Of Swimming Pool -- Providing And Applying Impermeable, Monolithic Application, Uv Resistant, Self Curing, Non Toxic, High Compressive Strength, Non Shrink, Polymer Based Cementitious Waterproofing Mortar Named As Poly Ironite Ceramic Cementitious ( Picc ) Which Consists Of Nicomix Series + 53 Grade Cement + Water Of Dimple Chemicals & Services Pvt. Ltd.For Resurfacing The Concrete Surfaces Of Swimming Pool To A Thickness Upto 10 Mm Or As Per Surface Condition And Also Treatment Of Lift Joints And Honey Combing Areas, Potholes Etc. By Removing Loose Material, Dust Particles, Grout Slurry By Breaking It With Manual / Mechanical Means. Removing Of Existing Embedded M.S. Bar If Any, Cleaning The Lift Joints, Honey Combing Areas And Entire Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removal Of Algae - Fungi Followed With High Pressure Water Jet. Apply Bond Coat Named As Kelox R 101 + Kelox H 404Which Is Water Miscible Epoxy Of Dimple Chemicals & Services Pvt. Ltd. Before Picc Application For Suitable Bond Between Old Surface To New Picc Mortar And Then Do The Picc Application Providing With Top Coat Of Niccoat Pc + Kelmer A 60 Of Dimple Chemicals & Services Pvt. Ltd. After Finishing, Complete As Per Specification Including Materials, Machinery, Labour , Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Applying Durabond Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique Blend Of Organic And Inorganic Materials Consisting Ceramic Ironite, Active Ceramic, Cement And Water Miscible Modified Epoxy. As This Contain Water Miscible Epoxy, Can Be Applied On Wet Surface With Better Bond Strength Between Old Concrete And Waterproofing Coating Material For External Surface Of Building. Crack Filling Will Be Done By Duraguardof Dimple Chemicals & Services Pvt. Ltd, Having Cold Weldling Properties Which Cn Stick Anything To Anything. Surface Cleaning Is Done To Remove Loose Material, Dust Particles By Breaking Using Manual And / Or Mechanical Means, Cleaning The Cracks, Small Potholes And Surface Preparation Will Be Done With Special Chemical Name Steripure 10Of Dimple Chemicals & Services Pvt. Ltd For Algae- Fungi Removal And Then Clean It With High Pressure Water Jet, Then Applying A Durabond Of 2 Coats A Special Type Of Coat Suitable To Bond Old To New Concrete Finishing, Complete As Per Specification Including Materials, Machinery, Labour, Scaffolding , Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Applying Duraclean Od Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Emulsification & Dispersion Of Oil And Grease Spilled On Any Surface ( Concrete, Metal Or Water ) .Apply By Brush Or Spray On The Surface To Be Cleaned, Wait For About 5 – 10 Minutes, Wash The Surface With High Water Presure Jet.Repeat Process For Heavy Spillage And Surfaces Soaked In Oil Till It Is De-Oiled. Wait For 24 Hrs And See Whether The Penetrated Oil Comes Out To The Outer Surface, If Yes Then Repeat The Step 2-4. Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Water Proofing Of Water Tank -- Providing And Applying Impermeable, Uv Resistant, Self Curing, Non Toxic, High Strength, Non Shrink, Polymer Based Cementitious Waterproofing Mortar Named As Poly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces Of Water Tank To A Thickness Upto 5 Mm Or As Per Surface Conditions And Also Treatment Of Lift Joints And Honey Combing Areas, Potholes Etc. Is To Be Done With Picc By Removing Loose Material, Dust Particles, By Breaking Using Manual And / Or Mechanical Means, Removing Of Existing Embedded M.S. Bar If Any, Cleaning Of Lift Joints, Honey Combing Areas And Surface Is To Be Done Using Special Chemical Named Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Algae- Fungi Removal Followed By Compressed Water Jet. Apply Primer Coat Name Kelox R 101 + Kelox H 404 A Water Miscible Epoxy Of Dimple Chemicals And Services Pvt. Ltd. Before Picc Application. Kelox Is A Bonding Agent Between Old To New Concrete Mortar. Top Coat Will Be Done With Niccoat Pc + Kelmer A 60 Of Dimple Chemicals & Services Pvt. Ltd., Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Impermeable, Anti-Wear Coating On Concrete & Bitumen Road :- Providing And Applying Bituminous Epoxy Coating Of Dimple Chemicals & Services Pvt. Ltd. Having High Abrasion Resistant, Anti-Skid, Impermeable, Non Shrink, High Compressive Strength, For Concrete And Bitumen Road Coating Etc. Including Cleaning Of Concrete / Bitumen Road Surface By Wire Brush, Water Jet, Air Blower Etc. ( Using Other Mechanical / Manual Means ) To Remove Existing Loose Particles, Dirt Etc. Then Do Bituminous Coating By Taking Kelox Rb 5050 Of Dimple Chemicals & Services Pvt. Ltd.In A Clean Container & Add Kelox Rh 4040 Of Dimple Chemicals & Services Pvt. Ltd.In It, Apply This Mixture By Wiper On The Cleaned Surface.Top Coat Is Done Using Ready To Use Product I.E. Nicomix Butacoat Of Dimple Chemicals & Services Pvt. Ltd. , After Bituminous Epoxy Coating Immediately Sprinkle Nicomix Butacoat On Bituminous Epoxy Coating To Provide Impermeable, Antiwear & Antiskid Surface. After 10-15 Min, Use Roller On Top Coat I.E. On Nicomix Butacoatfor Compaction. After 6 Hours, Coated Surface Is Ready To Take The Load Of Traffic Movement, Complete With All Leads And Lifts, Material, Machinery, Labour Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Bituminous Epoxy Coating Of Dimple Chemicals & Services Pvt. Ltd. An Impermeable, Excellent Bonding With Old Surface, Non Shrink Repair Coating For Concrete Terrace & Etp Plants Includs & Steel Structurebituminous Coating By Taking Kelox Rb 5050 In A Clean Container & Add Kelox Rh 4040 In It, Stirr Well To Get Homogeneous Mixture, Apply This Mixture By Brush Type Wiper On The Cleaned Surface I, E Dust And Loose Partical Free, No Algae Fungi, Non Oily Surface, Corrosion Free Etc. Bituminious Epoxy Coating Is A Two Pack System Consist Of Kelox Rb 5050 Is A Blend Of Bitumen Emulsion With Epoxy Resin And Kelox H 404 Is A Modified Hardener.It Ensures Strong Adhesion With Any Substrate Like Concrete Road, Bituminous Road, Metal, Wood Etc. Complete With All Leads And Lifts, Material, Machinery, Labour Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing& Applyinghigh Abrasive Resistant, Impermeable , High Strength, Non Shrink, Self Curing Poly Ironite Ceramic Cementatious ( Picc ) Of Dimple Chemical Services And Pvt Ltd, Which Consists Of Nicomix Series + 53 Grade Cement + Water I, E Piccmortar Mixing With Water Misible Epoxy I.E Kellox R 101 + Kelox H 404 Of Dimple Chemical Services And Pvt Ltdin The Ratio Of 80:20 ( Picc:Epoxy ) And Fill Thecracksfor 10 Mm Width & 10 Mm Depth With 1 Rmt Lengthon The Concrete Surface Ofroad, Industrial Floor Etc, Including Cleaning Of Cracks ( Using Manual / Mechanical Means ) , Power Tool Cleaning, Clean With Special Chemical Steripure 10 Of Dimple Chemical Services And Pvt Ltd For Alge Fungi Removal & Duraclean Od Of Dimple Chemical Services And Pvt Ltd For Oil Removalwith High Pressure Water Jet, Apply Bond Coat Of Water Misible Epoxy Of Keloxbefore Picc:Epoxy Application And Finishing, Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts And Any Other Incidental Charges As Directed By The Engineer In Charge. ( As Per Data Rate ) , Providing And Applying Duraclean Wr Of Dimple Chemicals & Services Pvt. Ltd. An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By Washing Or Mopping. Mesure Burr On The Surface, Spray Duraclean Wr On Surface To Be Cleaned, Wait For 5-10 Min And Then Wash It Off With High Pressure Water Jet. Again Mesure Burr On The Surface, Repeat The Process Till Burr Is Below 25 Micron Or 10% Of The Orignal Burr. Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Applying Clonon Of Dimple Chemicals & Services Pvt. Ltd. Clonon Is A Revolutionary Product Forbroad Spectrum Odour Remover.Clonon Contains A Proprietary Combination With Major Ingredilents Like Active Lodophor Solution, Benzalkonium Chloride Glutaraldhyde And Others, Clonon Product Main Features Of Odour Remover, No Added Fragrance , Debonds Nano Particles From Surface, Bacteria Killer, Quik Action, Non Toxic Chemicals, Ready To Use, No Stain And Residue , Does Not Contain Formaldehyde, Biodegradable Environmental Friendly.Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Laying In Situ Cement Concrete M -30 With Tremix Treatment For 200 Mm Thickness For Concrete Road With Uniform Sprinklingthe Nicocil R 90 Of Dimple Chemicals & Services Pvt. Ltd Using Travelfor Surface Hardening , High Abrasion Resistance And Low Porosity.Also Is Includinglaying Plastic Sheet For 125 Micron Thickness With Groove Cutting Of 4 Mm Wide And 20 Mm Deep With Necessary Refilling With Polysulphidesealant ( Pouring Grade ) Confirming To Bs : 5212 - 1989 Into Sawed Groove Widened At Top For Sealant Reservoir Of Specified Size And Shape As Per Detailed Drawing Including Fixing Polyethylene Foam Backer Rod Of Required Diameter ( Excluding Reinforcement ) With Coarsen And Fine Aggregate Using V.S.I.Qualityartificial Sand Etc. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Charges As Directed By The Engineer In Charge. ( Note- Construction Of Concrete Road As Per Instruction Of Engineer-In-Charge Or Requirement, Rate Of Construction Not Included ) , Providing And Applying Steripure S 30 Of Dimple Chemicals & Services Pvt. Ltd. Is Antibacterial, Antifungal Water Base Solution To Remove Algae-Fungi From Concrete , Masonry , Metal, Stone, Tile , Wood, Paver Block And All Composite Material Surface. Spray Steripure S 30 ( Prepar Dillusion In 1 Part Steripuri S30 : 9 Part Water ) On Surface To Be Cleaned, Wait For 15 - 20 Mins Then Wash The Surface With High Pressure Water Jet. This Unique Product Kills The Roots Of Algae-Fungi Which Can Be Removed From Surface By High Pressure Water Jet Cleaning. Re-Growth Of Algae-Fungi Is Stopped Due To Removal Of Roots. Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge. , Providing And Laying Of Rumble Strip Usingplastirib 2K 2 Component Cold Plastic Road Marking Material In Single Monolithic Application To Create Rumble Strip Raised Section 15 Mm - 20 Mm High , 200 To 300 Mm Wide And Spaced About 1 Meter Centre To Centre Of Roughly 6 Numbers At One Location, Across The Entire Carriageway. Each Rumble Marking Shall Be Made Complete With Drop On Solid Plus Reflective Glass Beads @ 350 Gm / Sqm Spread Throughout The Surface Of Marking. The Finished Surface Shall Be Levelled, Uniform , Free From Straks And Holes Including Surface Cleaning And Cost Of All Materials Etc. Complete. As Per Irc 99, These Rumble Strips Shall Be Applied As Traffic Calming Measure. , Kerb Stone / Vertical Surface Painting With Reflective Paint, Make Grade 1 ( As Per Is 164 ) Water Based Acrylic Paint, Preferably Mechnical Application For One Coat Priming Coat And 1 Uniform Retro Reflective Finish Coat In Required Colour. Yellow Retroreflecive Coat Shall Be Bright Yellow During Night With Minimum Rl ( Dry ) > 375 Mcd / M2 / Lux White Retroreflective Coat Shall Be Bright White During Night With Minium Rl ( Dry ) > 450 Mcd / M2 / Lux .Cleaning Of The Surface Thoroughly By Removing Flakes, Dust Deposits, Vegetation Growth, Pasted Paper Etc., Using Coir / Coil Brush, So As To Enable The Application Of Respective Primer Etc. , Providing And Applying 2 Component Cold Plastic Night Glow Paint Rolled On Surfacing Material Solvent Free, High Build Two Pack Seamless, Tough, Skid Resistant, Material Which Has Property Of Attaining 600 Microns Thickness In Single Coat Application White ( Or As Required Colour ) Based On Glass And Colour Retaining Acralic Cross Linking Resin System For Coloured Road Surfacing Including Surface Cleaning And Cost Of All Material Etc. Complete. ( All Inclusive On Bitumen Or Concrete Surface ) Night Glow Paint Shall Preferably Be Roller Applied. After Glow Finish Surface Shall Provide Minimum Of 8 Hrs Glow After Fully Absorbing Ambient Light ( Visibile Light Or Uv Light ) For 15 - 30 Min. Cleaning Of The Surface Thoroughly By Removing Flakes, Dust Deposits, Vegetation Growth, Pasted Paper Etc., Using Coir / Coil Brush, So As To Enable The Application Of Respective Primer Etc. , Augmented Wet Reflective Dot ( Awrd ) Marking System On Awrd On - Bituminous Surface Component Cold Plastic Road Marking Primer Supply And Application Awrd Road Marking System With Minimum Of 50% Of The Intended Road Marking The Surface Area To Be Covered With Dots Of Thickness Of 5+1 Mm, Each Dot Having Dia. Of 25 + 5 Mm Using Plastidot 2K 2 Component Cold Plastic Road Marking Material And Solid Plus 100 Drop Of Glass Beads With Ri 1.6. Performance Parameters Shall Comply With Rl Dry > 800 Mcd / Sqm / Lux & Rl Wet > 250 Mcd / Sqm / Lux , Measured Using Zehntner Gmbh / Esylux / Delta Make Reflectometer In Case Of Concrete / Worn Out Bituminous Surfaces Application Of 2 Component Cold Plastic Road Marking Primer Is Mandatory. , Augmented Wet Reflective Dot ( Awrd ) Marking System On Awrd On- Concrete Surface With Application Of Special 2 Component Cold Plastic Road Marking Primer Supply And Application Awrd Road Marking System With Minimum Of 50% Of The Intended Road Marking The Surface Area To Be Covered With Dots Of Thickness Of 5+1 Mm, Each Dot Having Dia. Of 25 + 5 Mm Using Plastidot 2K 2 Component Cold Plastic Road Marking Material And Solid Plus 100 Drop Of Glass Beads With Ri 1.6. Performance Parameters Shall Comply With Rl Dry > 800 Mcd / Sqm / Lux & Rl Wet > 250 Mcd / Sqm / Lux , Measured Using Zehntner Gmbh / Esylux / Delta Make Reflectometer In Case Of Concrete / Worn Out Bituminous Surfaces Application Of 2 Component Cold Plastic Road Marking Primer Is Mandatory. , Supplying And Fixing Of High Performance Moulded Shank Raised Pavement Marker / Cats Eye Made Of Reinforced Polycarbonate And Weather Protected Ip > 68 Abs Moulded Body Having 2 Compartment Scratch And Abrasion-Proof Prismatic Polycarbonate Lens Capable Of Providing A Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Per Wheel ( Per Axle ) Of 20000 Kg And Per Axle 40000 Kg Tested In Accordance To Astm 4280D & En 1463-1 And En 1463-2 And Morth. The Dimensions Of The Pavement Marker Being 100 X 100 X 18 Mm And Weight 140Gm, Pin 55 Mm Depth Dia 13 Mm In Star Shape For Better Gripfixing Will Be By Drilling Holes On The Road For The Shank To Go Inside, Without Nails And Using Cold Plastic-Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer. The Contractor And Manufacturer Shall Submit A Minimum 1 Yr Installation Warranty And 2 Years Reflectivity Warranty For Satisfactory Field Performance. , Supplying And Fixing Of Solar Road Studs ( High Performance ) Polycarbonate Body, Pavement Surface Mounted Compliant Withen1463 Part 3 Havinguni-Direction Or Bi-Directional With Solar Powered Led Illumination And Reflective Panel Having 1 ) Dimensions 115 X 100 X 8.5 Mm 2 ) Marker Shall Support A Load Of 20 Ton Tested In Accordance To En 1463 . 3 ) Waterproof And Dust Protection Ip > 68 4 ) Weight 117 Gram 5 ) Fixing Using 2 Coponent Cold Plastic Based Adhesive / Butyl Tape Or As Reccomended By Manufacturer 6 ) Working Temperature: Up To 80 Deg. C 7 ) The Contractor And Manufacturer Shall Submit A Technical Warraty Of 1 Yr. , Providing And Fixing 8 Mm Tinted Tuffan Glass With Fitting Inaluminium Section Of Size 100 Mm X 763 Mm Also Including Door Glass With Ss Handle Of Size 1.2M Height And 50Mm O.D. And 30Mm I.D. And Ss Door Hinges Of Size 150Mm Height And 80Mm Width On One Face, Fitting Glass With Silicone Tube Including Scaffolding And Fitting Charges Etc. Complete & As Directed By Enginner Incharge , Providing Concrete Resurfacing System Of High Strength High Abrasion Resistant Deck Crs Base Coat And Deck Crs Top Coat Of Approved Color With Antiskid / Rough Texture And With Approved Stencil Pattern Following By Deck Sealer Final Coat, Including Providing Surface Preparation By Using Grinder Machine / Hand Grinders On Serrated / Slurried Concrete Surface To Expose Original Hard Concrete Surface And Washing Area Thoroughly Including Removal Of Nails Erc Complete. Surface Will Be Open To Traffic After 72 Hours Of Application Of Deck Crs. Deck Crs Consumption 3.8-4 Kg / Sqm , Providing Concrete Resurfacing System Of High Strength High Abrasion Resistant Deck Crs Base Coat And Deck Crs Top Coat Of Approved Color With Antiskid / Rough Texture Without Any Pattern ( Plain ) And Followed By Deck Sealer Final Coat, Including Providing Surface Preparation By Using Grinder Machine / Hand Grinders On Serrated / Slurried Concrete Surface To Expose Original Hard Concrete Surface And Washing Area Thoroughly Including Removal Of Nails Erc Complete. Surface Will Be Open To Traffic After 72 Hours Of Application Of Deck Crs. Deck Crs Consumption 3.8-4 Kg / Sqm , Providing And Fixing 50 Mm Thick Door Shutter Using 25 Block Board 10 Mm Ply On Either Side Of Block Board , 4 Mm Thick Veneer On One Side With Melamine Polish And 1 Mm Thick Laminate On Other Side , Ss Hinges ( Brass ) 125 Mm , Tower Bolt 380 Mm , Mortise Lock , Concealed Door Closer Including Necessary Teak Wood Bedding , Fevical , Screw & Labour For Fixing Etc Complete As Directed By Engineer In Charge , Providing And Fixing 50 Mm Thick Main Entrance Door Partly Panelled And Partly Glazed Door Using 25 Mm Block Board , 10 Mm Ply Garjan On Either Side , Teak Wood Beading Covered With On Side 4 Mm Thick Rich Veneer With Melamine Polish, Floor Spring , Concealed Lock , 1.2 M Handle Pair Of 25 Mm Dia , Glass Pannels Of 0.40 X 0.40 Including Necessary Fevicol , Nails Screw And Labour For Fixing Etc Complete , Providing And Fixing High Quality Inter Locking Concrete Cobble Stone Finish Pavers In Circular Form Having Area Of 1.218 Sqm ( Approximately 71 Or 74 Nos. In One Circle ) , Made By Using Rubber Moulds Of 60 Mm Thickness, Tested And Certified By Csir-Cbri Of Having Strength Of 500 Kg / Sqm. Pavers Should Have 10 Mm Face Layer In White Cement With Pigment Of Lanxess Or Tata Make And Base Mix In M40 Grade Concrete. The Pavers Should Be Made Available In Various Sizes To Make A Circle Of Approved Finish And Design Of Standard Make On A Bed Of Crushed Sand Of 25 To 30 Mm Thick Including Skirting Joints And Cleaning As Directed By Engineer Incharge Etc. Complete. Prior Approval Of Superintending Engineer Will Be Necessary . , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size600 Mm X 450 Mm Light Duty Withstand To Carry A Load Of 5.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 600 Mm X 450 Mm Medium Duty Withstand To Carry A Load Of 12.50 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 600 Mm X 450 Mm Heavy Duty Withstand To Carry A Load Of 25.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 900 X 600 Mm Light Duty Withstand To Carry A Load Of 5.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 900 X 600 Mm Medium Duty Withstand To Carry A Load Of 12.50 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 900 X 600 Mm Heavy Duty Withstand To Carry A Load Of 25.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Glass Bricks Of Size 190 Mm X 190 Mm X 80 Mm Fitted Inside Already Prepared Ss / Ms Fabrication Using Silicon Glass Sealant Before Placing Of Bricks And After Placing Of Bricks To Create A Bond Between Fabrication Material And Glass Bricks, Finishing The Surface By Filling The Gap Between Glass Bricks With White Cement Etc. Including Loading And Unloading Of The Material As Directed By Engineer In Charge. , Supply, Providing Manufacturing And Fixing Of Interchangeble Plates Of Assigned Designation Post And Room Of Office, Judges And Subordinate Of Organization Of Providing 5 Mm Blue Frp Sheet For Base Surface And 5 Mm Frp Sheet Laser Cutting Latter Of White Color With Measuring , Marking, Cutting, Finishing Also With Fixing Of Letter On Based Surface By A Solvent By Providing Latters Name In Required Language Style, Type Font Including Interchangeble System For Easily Changing Of Plates As Per The Requirement For Pleasent And Elegant Look With Screw And Grip As Per Requirement And Direction Etc Complete. ( Size-0.65M*0.35 ) . , Supply, Providing Manufacturing And Fixing Of Interchangeble Plates Of Assigned Designation Post And Room Of Office, Judges And Subordinate Of Organization Of Providing 5 Mm Blue Frp Sheet For Base Surface And 5 Mm Frp Sheet Laser Cutting Latter Of White Color With Measuring , Marking, Cutting, Finishing Also With Fixing Of Letter On Based Surface By A Solvent By Providing Latters Name In Required Language Style, Type Font Including Interchangeble System For Easily Changing Of Plates As Per The Requirement For Pleasent And Elegant Look With Screw And Grip As Per Requirement And Direction Etc Complete. ( Size-0.25M*0.35 ) . , Providing & Fixing Ester Resin Material 5Th Km Structure As Per Irc-08-1980 With Chopped Strand Mat 350 Micron Gsm With H2o2, Cobolt Octate ( 3% ) , With Pigment & All Required Allied Accessories Front & Back Side Bonded With Type Iv Retro Reflective Sheeting & Lettering Etc Complete. The Contractor Has To Provide Outerdoor Test Certificate Of Type Iv Reflective Sheeting From The Retro Reflective Manufacture. For Fixing Structure Excavation Of 0.75 X 0.75 X 0.45 Mtr. & Filling The Soil Inside The Bags & That Bags Filled In The Structure As Directed Engineer In-Charge Etc Complete , Providing & Fixing Ester Resin Material 1St Km Structure As Per Irc-08-1980 With Chopped Strand Mat 350 Micron Gsm With H2o2, Cobolt Octate ( 3% ) , With Pigment & All Required Allied Accessories Front & Back Side Bonded With Type Iv Retro Reflectivesheeting & Lettering Etc Complete. The Contractor Has To Provide Outerdoor Test Certificate Of Type Iv Reflective Sheeting From The Retro Reflective Manufacture. For Fixing Structure Excavation Of 0.75 X 0.75 X 0.45 Mtr. & Filling The Soil Inside The Bags & That Bags Filled In The Structure As Directed Engineer In-Charge Etc Complete , Providing & Fixing Ester Resin Material 200 Mtr Structure As Per Irc-26-1967 With Chopped Strand Mat 350 Micron Gsm With H2o2, Cobolt Octate ( 3% ) , With Pigment & All Required Allied Accessoriesfor Fixing Structure Excavation Of 0.60 X 0.60 X 0.45 Mtr. & Filling The Soil Inside The Bags & That Bags Filled In The Structure As Directed Engineer In-Charge Etc Complete , Milling Of Bituminous Pavement Upto Depth Of 50 Mm By Cold Milling Machine Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead Charges Of 10 Km As Directed By Engineer In Charge , Milling Of Bituminous Pavement Upto Depth Of 100 Mm By Cold Milling Machine Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead 10 Km As Directed By Engineer In Charge , Dismantling Of Rigid Concrete Pavement Upto Depth Of 50 Mm Using Cold Milling Machine Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead 10 Km As Directed By Engineer In Charge , Re-Texturing Of Rigid Concrete Pavement Upto Depth Of 20 Mm Using Cold Milling Machine With Fine Milling Drum Of Width 1.5M Or Above Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead 10 Km As Directed By Engineer In Charge , Providing And Fixing Stainless Steel ( Grade 304 ) Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainlesssteel Nuts And Bolts Complete, I / C Fixing The Railling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixingh Accessories Such As Nuts, Bolts, Fasteners Etc. ) . , Providing Concrete Surfacing System With Deck Crs With Base Coat, Application Of Pattern In Stencil Followed By Top Coat And Sealer Including Surface Preparation Etc. Deck Crs Consumption About 4 Kg / Sqm As Per Manufacturers Specifications , Providing Concrete Surfacing System With Deck Crs With Base Coat Followed By Top Coat And Sealer Including Surface Preparation Etc. Deck Crs Consumption About 4 Kg / Sqm As Per Manufacturers Specifications , Providing And Fixing High Density Polypropylene Under Ground Water Tank Of Requiredsize With 5 Years Warranty Issued From Company, Also Shouldsubmit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge ( From 1000 To 3000 Litre ) , Providing And Fixing High Density Polypropylene Under Ground Water Tank Of Requiredsize With 5 Years Warranty Issued From Company, Also Shouldsubmit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge ( From 1000 To 3000 Litre ) , Providing And Fixingchevron Sign Boards In Rectangular Size Of 500X600 Mm Made Out Of ___Mm Aluminium Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting -Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retro Reflective Specified Background, Border And Back Side Retro Reflective Symbols, Letters, Numerals, Arrow As Per Irc 67-2012 Supported With Back Support Frame 25Mmx25mmx3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M.S. Angle Iron Post Of 65Mmx65mmx6mm, 3.45 Mtr Long, Dully Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25Cm Width Including G.I.Fixtures Etc. Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc. Complete.Class-B ( Type Iv High Intensity Micro Prismatic Grade Sheeting -Hip ) Shall Have 7 Years Writen Warranty From The Manufacturer Of The Retro Reflective Sheeting And Authorised Distributor / Converter Issued For Fiedl Performance Including The Screen Printed Area And Cut-Out Sheeting And Cut-Out From The Durable Transparent Overlay Film And This Warranty Certificate In Original & A Certified Copy Of 3 Year Outdoor Exposure Test Report From Third Party Test Lab For The Product Offered Shall Be Submitted By Contractor To Engineer Incharge. 500X600mmmade Out Of 3Mm Aluminium Composite Material With 0.25Mm Skin Thickness On Either Side , Providing And Fixing One Way Hazard Marker Sign Boards In Rectangular Size Of 300X900 Mm Made Out Of 4Mm Aluminium Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting -Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retro Reflective Specified Background, Border And Back Side Retro Reflective Symbols, Letters, Numerals, Arrow As Per Irc 67-2012 Supported With Back Support Frame 25Mmx25mmx3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M.S. Angle Iron Post Of 65Mmx65mmx6mm, 1.8 Mtr Long, Dully Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25Cm Width Including G.I.Fixtures Etc. Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc. Complete.Class-B ( Type Iv High Intensity Micro Prismatic Grade Sheeting -Hip ) Shall Have 7 Years Writen Warranty From The Manufacturer Of The Retro Reflective Sheeting And Authorised Distributor / Converter Issued For Fiedl Performance Including The Screen Printed Area And Cut-Out Sheeting And Cut-Out From The Durable Transparent Overlay Film And This Warranty Certificate In Original & A Certified Copy Of 3 Year Outdoor Exposure Test Report From Third Party Test Lab For The Product Offered Shall Be Submitted By Contractor To Engineer Incharge. 300X900mmmade Out Of 4Mm Aluminium Composite Material With 0.5Mm Skin Thickness On Either Side , Providing And Fixing Two Way Hazard Marker Sign Boards In Rectangular Size Of 450X900 Mm Made Out Of 4Mm Aluminium Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting -Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retro Reflective Specified Background, Border And Back Side Retro Reflective Symbols, Letters, Numerals, Arrow As Per Irc 67-2012 Supported With Back Support Frame 25Mmx25mmx3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M.S. Angle Iron Post Of 65Mmx65mmx6mm, 1.8 Mtr Long, Dully Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25Cm Width Including G.I.Fixtures Etc. Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc. Complete.Class-B ( Type Iv High Intensity Micro Prismatic Grade Sheeting -Hip ) Shall Have 7 Years Writen Warranty From The Manufacturer Of The Retro Reflective Sheeting And Authorised Distributor / Converter Issued For Fiedl Performance Including The Screen Printed Area And Cut-Out Sheeting And Cut-Out From The Durable Transparent Overlay Film And This Warranty Certificate In Original & A Certified Copy Of 3 Year Outdoor Exposure Test Report From Third Party Test Lab For The Product Offered Shall Be Submitted By Contractor To Engineer Incharge.450X900mmmade Out Of 4Mm Aluminium Composite Material With 0.5Mm Skin Thickness On Either Side , Providing And Fixing 8 Mm Tinted Tuffan Glass With Fitting Inaluminium Section Of Size 100 Mm X 763 Mm Also Including Door Glass With Ss Handle Of Size 1.2M Height And 50Mm O.D. And 30Mm I.D. And Ss Door Hinges Of Size 150Mm Height And 80Mm Width On One Face, Fitting Glass With Silicone Tube Including Scaffolding And Fitting Charges Etc. Complete & As Directed By Enginner Incharge , Encasement Of Columns And Beams By Placing 75 To 100 Mm Thick Free Flow High Strength Micro Concrete With Leak Proof Shuttering With All Equipments, Manpower Etc Complete , Providing And Applying Epoxy Mortar Epibond 11 In Areas Of Fixing Cracks, Charges For Repairing Of Full Depth Crack ( 30Mm Depth X 50Mm Width / Per Rmt ) On Pqc Pavement Using Cross Stitching Method As Per Specification Of Irc Sp : 83-2008. Making Chase Along Crack And Cleaning The Holes / Chase With Oil Free Compressed Air, Fixing Of Reinforcement In Holes Filled With Epoxy Resin In Enough Quantity For The Bar To Be Completely Coated When Inserted In The Hole, Chase Filling With Epoxy Epibond 11 ( 1:1:8 ) Resin+Hardner+Fine Sand As Per Manufacture Specification, Curing, Transportation, Required Machinery, Tool And Tackles Etc.Complete As Per Direction Of Eic. , Providing And Applying Volatile Corrosion Inhibiting Wax Powrthrow Ht Wax On Ht Lrpc Strands Before Embedment In Tendons, Lrpc Strands Of 12.7Mm & 15.2Mm , Tendon Duct Need To Be Lime Washed Prior To Insertion Of Lrpc Strands Coated With Wax. The Wax Must Be Hand Applied Using Gloves From The Pail Prior To Insertion On Strand In Duct. Powrthrow Ht Wax Is Bipolar In Nature Should Protect The Strand From Corrosion. As Per Jis Z 1535M Method Should Have Excellent Resistance To Corrosion Spots. And The Wax Should Show A Potential Change Of Minimum 120Mv As Per Corrosion Potential Test.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Maharashtra View Result →
29.
Defence #10788784 Price Bid
Tender For provision Of Certain Sanctioned Works At (Phase-Xv) Of Various Units At Tezpur And Misa Camp Area Under Ge (S) Tezpur - 1 Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. 2 Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting outincluding trimming the sides and forming bottom surfaces to required levels in soft/loose soilcomplete all as specified and directed. 3 Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed. 4 Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 5 M&L hardcore of broken stone or boulders gauge n.exc 63 mm, deposited, spread & levelled in layers n.exc 15 cm thick, watered & rammed to a true surfacecomplete all as specified and directed. 6 M&L 75mm thick PCC 1:3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with scaling compound grade A where required complete all as specified and as directed. 7 M & L for PCC 1:3:6 type D2 using 40 mm graded aggregate as in foundation filling and mass concrete, complete all as specified and directed. 8 M & L for PCC 1:3:6 type C1 using 20 mm graded aggregate as in copping and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. 9 Material and labour for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in foundation of brick pillar to support the pipe line including demolition of old PCC and removing the debris from site, complete all as specified and directed. 10 Material and labour for brickwork with subclass ‘B’ bricks laid in flat, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. 11 M&L for chequered cement concrete tiles of size 30 cmx 30 cm x25 mm thick with grey cement and pigment, top surface treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 12 M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 and finished evenand smooth without using extra cement complete all as specified and as directed. 13 Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 95 Sqmm 3.5 core complete all as specified and directed. 14 Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 50 Sqmm 3.5 core complete all as specified and directed. 15 Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified and directed .Note :- Punned thickness 18 cm shall only be considered for payment 16 Supply and lay in trenches bricks, for cable protection complete all as specified and directed. 17 S&F Pipes galvanized,50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed. 18 Dismantling and taking out from trenches/wall the existing old u/sGI pipe of 50mm bore including all fittings such as bends, elbow and Tees etc. of following sizes complete all as specified and directed. 19 Dismantling and taking out from trenches/wall the existing old u/sGI pipe of 80mm bore including all fittings such as bends, elbow and Tees etc. of following sizes complete all as specified and directed. 20 Dismantling and taking out from trenches/wall the existing old u/sGI pipe of 100mm bore including all fittings such as bends, elbow and Tees etc. of following sizes complete all as specified and directed. 21 M&L DI pipe of 150 mm bore with spigot and socket end rubber gas cate joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to existing line complete all as directed. Cost of joint included in the qoted rate, complete all as specified and directed. 22 M&L DI pipe of 100 mm bore with spigot and socket end rubber gas cate joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to existing line complete all as directed. Cost of joint included in the qoted rate ,complete all as specified and directed. 23 Supply and fixing sluice valve of size 150 mm(conforming to IS-14846-2000) long type CI body, gland thrust plate, hand wheel of grey cast iron, spindle of hightensile brass, nut body seal ring and wedge facing ring head, bronze bolt nut of high carbon steel, gasket of compressed fiber gland packing of jute having flanged & drilled type nominal pressure rating , PN 1.6 including jointing flanged joint with rubber fibre jointing ring bolt nut & washer complete all as specified and directed. 24 Supply and fixing sluice valve of size 100 mm(conforming to IS-14846-2000) long type CI body, gland thrust plate, hand wheel of grey cast iron, spindle of hightensile brass, nut body seal ring and wedge facing ring head, bronze bolt nut of high carbon steel, gasket of compressed fiber gland packing of jute having flanged & drilled type nominal pressure rating , PN 1.6 including jointing flanged joint with rubber fibre jointing ring bolt nut & washer complete all as specified and directed. 25 Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore. complete all as specified and as directed. 26 Material and Labour for DI fittings/specials such as Tees, bends (any type, radius and angle ) tapers any type, collars,tail pieces,caps and plugs up to 150 mm bore confirming to IS: 9523-2000 complete all as specified and as directed. 27 Material and labour for Run lead joint including jointing material for CI/DIof 100mm bore pipe complete all as specified and as directed. 28 Material and labour for Run lead joint including jointing material for CI/DIof 150mm bore pipe complete all as specified and as directed. 29 Cutting of existing upto 250 mm bore CI pipe in position for inserting new Tee, branches, sluice valves etc, complete all as specified and as directed. 30 M & L for construction of valve chamber and brick masanary in CM 1:6 of size 90cm x 90cm x 90cm (internal dinentions) with 15cm thick PCC foundation in PCC 1:4:8 type D2 using (40mm graded stone agreegate) 15mm thick plaster in cm 1:6, 3mm thick MS sheet cover including 40 x 40 x 6mm MS angle iron frame fixed in PCC coping, using PCC 1:2:4 type B1 (using 20mm graded stone agreegate) with necessary locking arrangement and pointed with two coats of synthetic enamel paint over a coat of redoxide primer on all exposed surfaces including necessary excavation and earth work in any type soil returning and filling in and ramming and removal of surplus soil upto a distance not exc 50 mtr, complete all as specified and directed. 31 Supply, commisioning,testing and lowering of Submersible pump set, electric driven 415 V, 50 HZ, 3 PH suitable for 200/300 mm dia bore well (Casing pipe size 200/300 mm)of capacity 20 HP (15 KW), Head 27 to 88 meter, at discharge range 500 to 1250 LPM suitable for pipe ofsize 100 mm complete all as specified and directed. 32 Supply , install, testing and commissioning of floor mounted LT outdoor panel board AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessoriestotally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for indoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick with CPRI Approved CRCA steel sheet of suitable Size with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , completeall as specified and directed:- BUSBAR(a)Copper bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos(b)Supply and fixing MCCB 4 pole 415 Volts of breaking capacity of 25 KA of 100 Amps with Fixed thermal and Fixed magnetic setting - 01 No(c)Supply and fixing On load change over 100Amps 4 pole 415 Volts - 01 NoINDICATING DEVICES(a) Supply and fixing LED Indicating lamps for Main Supplyindicating R, Y, B - 03 Nos.(b)Supply and fixing Digital Ampere Meter 31/2 digit display , incl CT having CTR 100/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos.OUTGOING FEEDERS(a)Supply and fixing MCCB of 4pole , 415volts of capacity 80 ampswith breaking capacity of 16 KAFixed thermal and fixed magnetic setting - 01 No.(b)Supply and fixing MCB SPN, 230 volts of capacity 16 amps of c curve of 10 KA -01 Nos.(c)Supply and fixing automatic star delta strater for 20 HP- 02 Nos 33 M&L for earthing complete with galvanised steel earth plate electrodesize 600x600x6.0mm thick buried directly in groundvertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised Iron strip of size 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised steel and GI Protection pipe light grade 40 mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI stripfrom top of earth plate up to 5.00 meter above ground level complete all as specified and as directed. 34 Supply, installation, testing, and commissioning of silent built in within an acoustic enclosure diesel engine driven generating set water cooled sound proof canopy as per CPCB-IV norms for power supply 415 volts, 03 Phase, 4 wire, 50 cycles / sec, 60 KVA (48 KW or next nearest higher capacity) at 0.8 power factor complete with alternator directly coupled to diesel engine, mounted on common base frame & complete with self starter, fuel tank capacity not less than 08 hours fuel requirement & battery as per OEM, battery leads, sound proof canopy etc. with features for automatic shutdown in the event ofa circuit failure condition arising from low oil pressure, high coolant temperature, over speed etc. & microprocessor based genset includingOEMin built fitted AMF panelwith complete all as specified and as directed for 60 KVA as per under mentioned features :- a) Alphanumeric LCD display with LED backlight b) Operator interface.c) Suitable to provide a record of most recent fault conditions & fault history.d) Complete alternator data viz, voltage ph - ph, ph - neutral, KVA, frequency etc.e) Complete engine data viz, starting battery voltage, engine temp, engine running hours, engine oil pressure etc.f) Control including provn of service adjustment & calibration of DG control functions.(A) Genset shall have followings Specifications :Prime mover Rating : 60 KVA/48 KW No of Phase : 03 Power Factor: 0.8 (LAG)(C) Alternator specifications : Voltage : 415 Volt, RPM / Frequency : 1500 / 50 HZ, Enclosure : IP 23, Voltage regulation (Max) : +/- 1 %, Insulation class : H Class(F) Size/type/Number of battery : As per manufacturere (OEM) recommendations.(G) OEM manufacutured Inbuilt type AMF Panel with suitable size MCCB - 02 Nos ( DG incomming and Main Incomming), heavy duty3 Pole contractor, Auto Manual switch, Digitial Amper Meter & Volt meter- 02 Sets (for DC battery current and AC for Mains), 3 Phase Indicators , CT`s , Suitable rating aluminium bus bar complete. Note:- (i) Anything missed out in the technical specifications but technically required for efficient working of DG Set is deemed to be included in the quoted rates.(ii) The quoted rate shall be deemed to be inclusive of first fill of engine oil & final successful acceptance test.(iii) The quoted rate shall be deemed to be inclusive of 12 Hrs test run at site as specified in the PS in presence of rep of Accepting Officer; all testing arrangements / equipment’s, resistive load including POL shall be made available by the contractor.are to be included. (iv) The quoted rate shall be deemed to be inclusive of the PCC foundation required for placing the DG set and it should be as per the manufacturers recommendation.(v) Contractor shall submit the specification of DG set and take prior take approval from GE before procurement of DG set.(vi) Contractor shall produce the plateform drg form OEM and take approval of GE.(vii) Contractor shall produce all test certifacte and Purchase voucher before claming the payment.(viii) AMF panel shall be inbult type as per OEM specification. 35 Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having storage capacity 80 ltrs and nominal cooling 40 ltrs capacity complete all as specified and as directed. 36 Supply and install Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hz capacity 320 Ltrs BEE 5 Star rated complete all as specified and as directed. 37 Supply & installing air cooled split type air conditioner (indoor and outdoor) electric driven complete with cordless remote control unit and built Air ioniser and Plasma filter for better indoor air quality with mimimum 5 star rating and EER 3.2 single phase of capaity 1.5 TRcomplete all as specified and as directed. 38 Supply and install refrigerator electric driven single phase, Double door of capacity 360 Ltrs BEE 5 Star rated complete all as specified and as directed. 39 Supply and install Voltage stablizer for automatic operation, single phase of capacity 1 KVA, of range140 V to 280 V with UV and OV cutoff complete all as specified and as directed. 40 Supply and install Voltage stablizer for automatic operation, single phase of capacity 4 KVAof range140 V to 280 V with UV and OV cutoff complete all as specified and as directed. 41 Supply and install Voltage stablizer for automatic operation, single phase of capacity 5 KVAof range140 V to 280 V with UV and OV cutoff complete all as specified and as directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
30.
Public Administrative Department #10788710 Price Bid
Tender For To Carry Out The Remaining Works Of Pune Municipal Corporation Jaysingrao Sasane Park On B.T. Kavade Road.-ITEM NO : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m.) By Manual Means ( SSR Item No : 21.01 ) (PMC Bhavan ) Unique No (15201) Rate List Year (2024-2025) ITEM NO : 2 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge ( SSR Item No : 78.36 ) (PMC Bhavan ) Unique No (17223) Rate List Year (2024-2025) ITEM NO : 3 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material ( SSR Item No : 3.01 ) (PMC ROAD ) Item Spec : (MORTH 401) Unique No (116) Rate List Year (2023-2024) ITEM NO : 4 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. ( SSR Item No : 21.38 ) (PMC Bhavan ) Unique No (15233) Rate List Year (2024-2025) ITEM NO : 5 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( SSR Item No : 24.04 ) (PMC Bhavan ) Unique No (15309) Rate List Year (2024-2025) ITEM NO : 6 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( SSR Item No : 25.13 ) (PMC Bhavan ) Unique No (15318) Rate List Year (2024-2025) ITEM NO : 7 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( SSR Item No : 25.72 ) (PMC Bhavan ) Unique No (15333) Rate List Year (2024-2025) ITEM NO : 8 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( SSR Item No : 26.33 ) (PMC Bhavan ) Unique No (15352) Rate List Year (2024-2025) ITEM NO : 9 Providing first class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering etc. Complete. ( SSR Item No : 27.02 ) (PMC Bhavan ) Unique No (15371) Rate List Year (2024-2025) ITEM NO : 10 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. ( SSR Item No : 32.11 ) (PMC Bhavan ) Unique No (15444) Rate List Year (2024-2025) ITEM NO : 11 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary ( SSR Item No : 35.26 ) (PMC Bhavan ) Unique No (15576) Rate List Year (2024-2025) ITEM NO : 12 Building (Bd-V : Water supply and sanitory fittings)Upvc sanitary pipes all 50 mm dia. ( SSR Item No : 49.V-357 ) (PMC Bhavan ) Unique No (18028) Rate List Year (2024-2025) ITEM NO : 13 Providing & Applying One Coat Oil Primer & Two Coats Of Oil Painting of selected in multi color shades for existing Kid’s Toy like Slide, Swing, Sea Saw etc. ( SSR Item No : 18 ) (PMC Garden ) Unique No (19518) Rate List Year (2024-2025) ITEM NO : 14 Air Walker DIMENSIONS :- 1060mm (Length) x 810mm (Width) x 1600mm(Height). SAFE AREA: - 2.0 M x 1.8 M Air Walker Equipment made from “B” class G.I. Pipe of different NB. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The bottom support of M.S. round plate of Ø250 mm & 10mm thick. The leg movement frame is of 32NB made from “B” Class G.I. pipe. This link is supported with MS flat of size 60X8mm. The handle frame is of 25NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm are made up from bright material. A24 circlips are used for assembly. The bearings used are “6205” permanent lubricated sealed bearing of repute brand likw SKF, FAG. High tensile steel galvanized nuts & bolts are used for assembly. The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. To build structure bushes are used which are made from M.S.seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. Bolt M8 X 16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 10 ) (PMC Garden ) Unique No (19631) Rate List Year (2024-2025 ITEM NO : 15 SHOULDER BUILDER Providing and fixing Shoulder Builder made from “B” Class G.I. pipe. The Center Pipe is of 100mm NB made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The handle movement frame is of 25 NB & 20 NB made from “C” Class G.I. pipe. To Join the centre pipe & handle movement frame seamless pipe of 130mm dia & 3mm thickness is used. The foundation used for fixing consists of three equal items i.e. 100mm NB made from “C” class G.I. Pipe, M.S. Round Plate of 250 mm dia & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. Closing caps made from top quality FRP material which is of 2 mm thickness. The pins used are made up of 25 mm dia bright bar. The bearing used are of “6201” & “6205” permanent lubricated sealed bearing of reputed make like SKF, FAG. The nut bolts used for assembly are made from S.S. material. The serclips used for assembly is of 25 mm diameter. The Poly Urethin plastic bush is used for handling. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3 m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 1 ) (PMC Garden ) Unique No (19622) Rate List Year (2024-2025 ITEM NO : 16 Single Chest Press DIMENSIONS:- 9000mm (L) x 650mm (W) x 2150mm. (H). SAFEAREA :- 2.0 M X 1.7 M. Chestpress equipment madeup of“B”ClassG.I.pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NBmadeup of“B”Class G.I. pipe. The bottom welded with supportof M.S.round plate of Ø250mm &10mm thickness.The connecting pipes are made up from 25NB “B”class G.I.pipe. The handle frame is made up from 25NB & 32NB “B”class G.I.pipe. To build structure bushes are used which are made from MS.seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush isused. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm&10mmthick. Main pipe supported with 25mm X 25mm M.S. angles of 2mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. Foundation cover Closing Cap is madefrom HDPE / LLDPE Material.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mmX 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.Closing Caps are made up of high quality HDPE / LLDPE material. Pins used of Diameter 25mm and 17mm are made up from bright material. The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand like SKF, FAG. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for locking is made up of A24mm & A16mm. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 11 ) (PMC Garden ) Unique No (19632) Rate List Year (2024-2025) ITEM NO : 17 Leg Press Providing and fixing Leg Press made from “B” Class G.I. pipe. The center pipe is of 100mm NB made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The remaining outer frame is of 40mm NB made from “C” class G.I. pipe. The foundation used for fixing is consist of three equal items i.e. 80mm NB made from “C” class G.I. pipe, M.S. Round plate of 250mm dia & 10mm thickness, 25 mm X 25 mm X 3mm M.S.angle. To join the centre pipe & outer frame seamless pipe of 130 mm dia & 3mm thickness is used. The seats are fitted on the outer frame is made up of FRP material of size 330 mm X 330 mm of thickness 3 mm & M.S. Plate of thickness 5mm and Size 250 mm X 200 mm is used to support it. The footrests is made from FRP/C.I./Aluminum casting material, its sizes are 130 mm X 300 mm & 5 mm thickness. The frame of footrests consists of 25 NB made from “C” class G.I. pipe. Closing caps made from top quality FRP material which is of 2 mm thickness. The inner bushes are made from seamless pipe, its diameter is60mm& 8mm thickness. The pins used in are made up of 25 mm diameter hardened bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make like SKF, FAG. The handles used are of Rubber grip. The Nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50 mm diameter. The serclip used for assembly are of 25mmdiameter. foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge. ( SSR Item No : 7 ) (PMC Garden ) Unique No (19628) Rate List Year (2024-2025) 2 48804 / Number 97608 ITEM NO : 18 DOUBLE POST SWING (Proving and Fixing) Rec. Age :- 4-14 yrs. The area :- 3.5 x 1.0m Safe play area :- 4. X 2.0m The leg supports of the single post swing is made up of 150 NB while the top bar is of 50 NB GI pipes. The GI pipes are powder coated. All pipes are ‘A’ class pipes, The two swings are made up of 10mm thick skid reinforced. The seats of the single support swing are made up of 10 mm thk rubber with anti skid. The rubber seat is suspended on 6mm thk gi chain. The ball bearings of brands like SKF, FAQ are mounted inside a specially designed nylon clamp. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per Engineer incharge Instructions ( SSR Item No : 3 ) (PMC Garden ) Unique No (19526) Rate List Year (2024-2025) ITEM NO : 19 WAVE SLIDE 2.1 MT (Proving and Fixing) (FRP)/ROTO MOLDING ( LLDPE /HDPE) Rec. Age :- 4 – 12 yrs. The area :- 4.8 m x 0.5 m Safe play area :- 5.8 m x 1.5 m Height :- 2.1m The wave slide chute is made up of 4 mm thick fiber reinforced plastic materials. The structure comprises of 20 NB and 25 NB powder coated GI pipe. The center support is made in 80 NB powder coated GI pipe. The ladder cum railing is made 20 NB and 25 NB GI pipes. The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet. The chute has its end such as it causes safe landing of the child. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per Engineer incharge Instructions. ( SSR Item No : 10 ) (PMC Garden ) Unique No (19533) Rate List Year (2024-2025) ITEM NO : 20 ROTO WAVE SLIDE – 2.1 m (Proving and Fixing) Age Group :- 4 – 12 yrs. Product Area :- 5.5 m x 1.0 m Safe Play Area :- 6.5 m x 2.0 m Material Specification: The ROTO Wave Slide is made up of Low Linear Density Poly Ethylene by Rotational molding process in one piece having shell thickness of 4-5 mm with UV stabilized. The slide is supported on a center support of 80 NB GI pipe. The landing supports of the slide are supported by two 20 NB pipes. The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. The triangular steps of the ladder are made up of 16 SWG GI sheets. The ROTO wave slide platform is made up of 14SWG GI sheet. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. This slide is designed as per ASTM & EN standards which are globally accepted standards. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per Engineer incharge Instructions. ( SSR Item No : 12 ) (PMC Garden ) Unique No (19535) Rate List Year (2024-2025) ITEM NO : 21 ANIMAL MGR (Proving and Fixing) Rec. Age : - 3 - 12 yrs. The area :- 1.5 m dia. Safe play area :- 2.5 m dia. The main frame the animal merry go round is made up of 25 NB & 40 NB pipes. The GI pipes are powder coated. The stand is made in NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The animal seats are made out of molded plastic in rotational molding process (LLDPE/HDPE). It accommodates 4 children at a time. All pipes are ‘B’ class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per Engineer incharge Instructions. SSR Item No : 18 ) (PMC Garden ) Unique No (19541) Rate List Year (2024-2025) ITEM NO : 22 STANDARD SEE-SAW – (Proving and Fixing) Age Group : - yrs. Product Area : - 2.5 m x 0.3 m Safe Play Area : - 3.5 m 1.3 m The seats of the see-saw are made from ROTO molded plastic. The lever is made up of 15, 20, 25 NB GI pipes and fitted on 40 NB GI pipe. The bearing used is of heavy duty bush type. All pipes are ‘B’ class pipes The Foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.45m and painting done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Work done should per Engineer incharge Instructions. SSR Item No : 21 ) (PMC Garden ) Unique No (19544) Rate List Year (2024-2025) ITEM NO : 23 Stamped Concrete :- Thin overlay approximately 1/32 to 5/ thicker application may be nessecery in some situations) stamped concrete overlays over M-20 concrete of 100 mm thicksurface, interior, applied smooth,textured or stamped in various patterns and designs using stamps and seamless texture skins, then antiqued, chemically stained or integrally colored and sealed with the appropriate coating. Systems sealers or protective top coats according to the job conditions and specifications. including the cost of M-20 concrete of 100 mm thickness) SSR Item No : 1.10 ) (PMC ROAD ) Unique No (204) Rate List Year (2023-2024) ITEM NO : 24 type Kerb: Providing & fixing Reinforced precast-L shape kerb stone Using 6 mm steel bars 4 number along the kerb length and mm steel bar 500 mm c/c vertical reinforcement , M-30 grade concrete with dimensions 350 mm high,125 mm thick with built base of 187 mm x 75 mm, including 2 numbers of 50 mm dia sleeves for services at the top of the base & with top external edge with rounding of 20 mm radius in highly superior quality surface & edge finish in 1 meter length & Painting as per direction Engineer - in - Charge. ( Including excavation for kerbing, lead lift and transportation of excavated material, P.C.C. below kerbing) SSR Item No : 1.01 ) (PMC ROAD ) Unique No (195) Rate List Year (2023-2024) ITEM NO : 25 Providing and erecting chain link fencing 1.6 M. height with G. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/ with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. SSR Item No : 46.39 ) (PMC Bhavan ) Unique No (16044) Rate List Year (2024-2025) ITEM NO : 26 Building (Bd-W : Water supply and sanitory fittings)Concentina Coil Wire SSR Item No : 49.W-09 ) (PMC Bhavan ) Unique No (18065) Rate List Year (2024-2025) ITEM NO : 27 Wall Painting art work : painting artistic work on any type surface and at any height using scaffolding with skilled artists per the instructions of site incharge.measurement will be as per actual max.size of art.rate for background apex paint and lettring will be paid seperately SSR Item No : 63.4 ) (PMC Bhavan ) Unique No (16694) Rate List Year (2024-2025)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 7
Maharashtra View Result →
31.
Power #10746293 Price Bid
Tender For Increasing Capacity 33 / 11Kv Sub Station Ujhani Town And Its 11 Kv Link Line In District Budaun-2 Part ( A ) - Increasing Capacity 3 Loading, Unloading And Safe Carriage Of The Following Materials From Any Electy. Store Center Of Electricity Store Division Of Bareilly Zone. 4 M.S. Channel 125X65mm 5 M.S.Angle 75X75x8mm 6 Ms Angles 50X50x6mm 7 33 Kv Lightening Arrestor 8 33 Kv 400 A Bus Isolator 9 33 Kv Vcb 800A 750 Mva 10 Control Pannel I / C For 33 Kv Single T / F 11 33 Kv O / D Ct Ctr 200 / 100 / 1 12 11 Kv Vcb I / C Ctr 600 / 300 / 5A 250 Mva 630 A 13 11 Kv Vcb O / Gctr 200 / 100 / 5A 350 Mva 14 11 Kv Cable 3X300 Sq. Mm Xlpe 15 11 Kv Cables 3X185 Sq. Mm Xlpe 16 11 Kv Cable Jointing Kit 17 Pcc Pole 8.5Mtr. Long 18 M.S.Channel 100X50x2240mm @ 9.6Kg / Mt. ( Top Channel & Dropper ) 19 M.S Angle Lron 65X65x6mm, 4300Mm Long @ 5.8 Kg / Mt ( Bracing ) 20 11Kv Disc Insulator 45Kn 21 Disc Fittings Dog / Racoon 45 Kn 22 Earthing Complete 23 Stay Set 16X1800 Mm Complete 24 Acsr Dog Conductor 25 Earthing Of Indoor & Outdoor Equipments Of Sub-Station After Proper Welding Of Joints And Painting Of Earth Strip Above Soil With Proper Clamp Etc. As Per Respo Approved Drawing & Resistance Of Earthing Should Be Not More Than 2O As Per As Per Details Given Below. Firm Have To Submitted Jointly Signed Resistance Testing Certificate Of Earthing. 26 Making Of Triangular Bridge By Using 32 Mm Ms Round Bar Electrode, Gi Strip 50X6mm And Gi Pipe 50 Mm Dia With Providing Of Well Type Pipe Earthing Upto 20 Mtr. Depth Below Ground Level Including Welding Etc. By Boaring Process At T / F Neutral And T / F Body Including Cost Of Gi Pipe Of Size 40 Mm Dia 15 Mtr. Long Of Isi Mark ( All The Required Material Will Be Supplied By The Contractor And Dully Checked By Ae ( Works ) . 27 Supply Of Gi Strip Of Size 50X6mm For Earthing Of All Newly Erected Structures And Equipments In Switchyard Including Cutting, Fixing & Proper Welding With Equipments. All La Will Be Seprately Earth Also As Per Respo Norms. ( All The Required Materials Will Be Provided By Firm And Will Be Inspected By Ae ( Works ) Before Installation. ) 28 Fabracation, Erection And Grouting Of The Following Structures As Per Resspo / Approved Drawing And Its, Plinth 30Cm Above Ground Leval As Directed By The Engineer Incharge ( All Steel Sections Will Be Provided By Deptt ) . 29 33 Kv Bus Isolator Structure 30 Lightening Arrestor Structure 31 33 Kv Vcb Structure 32 33 Kv Ct Structure 33 Fuse Set Structure 34 Post Insulator Structure 35 Installation Of Followig Equipments On Their Respective Structures Including Mechanical & Electrical Fixing After Proper Adjustment On Their Structure. 36 33 Kv Bus Side Isolator 37 Lightening Arrestor 38 33 Kv Vcb Complete 39 33 Kv Ct ( 03 Nos ) 40 33 Kv Fuse Set ( Will Be Provided By Firm ) 41 33 Kv Post Insulator ( Will Be Provided By Firm. ) 42 24 V Battery Set With Charger ( To Be Provided By Firm I.S.I. Mark Only Of Dc System With One Float Cum Boost Charger & Battery Set For 24V. System With 200A.H. Capacity With Cabinet ) . Including 3 Year Guarantee. 43 Complete Laying And Termination Of Copper Control Cables ( Fire Resistance ) From 5 Mva Power T / F, 33 Kv Vcb, 33 Kv Ct In The Out Door Switch Yard To The Transformer Relay Control Panel Inside The Control Room Including Cost Of All Materials And Labour Required For Proper Completion Of Works As Per Resspo Drawings, Including Cost Of Testing Of Transformer, Vcb, Ct, Relay Pannel & Proper Relay Settings As Per Requirement Etc. 44 Laying Of Dog Conductor Alongwith Cost Of All Required Calmps And Connectors Etc. As Per Resspo Approved Drawing Of L.A., C.T., V.C.B., Bus Isolator Etc. 45 Erection And Grouting Of Double Pole Structure Of Pcc Poles Including Stays For 11Kv Out Door Feeders, Complete In All Respect As Per Resspo Drawing Along With Grouting Material About 3 Meter 4 Dia G.I. Pipe Along With Required Elbow Shall Be Provided At D / P For Power Cable Including Provision Of 02 Nos. Feeders Name Plate On D / P. ( All Type Of Insulators, Steel, Stay Set With Wire, Earthing Rod, Clamps, Gi Pipe & Grouting Material Provided By The Firm Except Pcc Pole ) . 46 Making Of M.S. Angle Ladder Type Frame Of Angle ( 75X75x8mm ) & Gi Strip ( 50X6mm ) Near Power Transformer For Power Cable With Concreting Of The Same In The Ground And Proper Clamping ( 50X6mm ) Of The Same With Transformer Cable. 47 Making Of M.S. Angleframe Of ( 75X75x8mm ) In L Shape To Connect T / F Neutral By Flexible Copper Strip Including Cost Of Copper Strip & Will Be Connected To Newly Constructed Well Type Earthing For Power T / F Neutral As Per Respo Norms. 48 Laying Of 11Kv Cable Of Different Size From Power T / F To Control Room I / C And Control Room To Outside D / P. 11 Kv Cable Will Be Layed In Brick Trench Constructed Below 750Mm To The Ground Level Over The Ganga Sand. Brick Trench Will Be Constructed By Ist Class Bricks Covering Three Sides Of Cable, After Laying 11 Kv Cable Brick Trench Will Be Filed By Ganga Sand & Then Will Be Covered By Bricks & Backfill Of Soil Over Cable Trench As Per Respo Norms. 49 Erection Of 11 Kv Incoming And Outgoing Panel ( With Testing & Setting Of Relays ) In Substation Control Room Including Grouting Of Anchor Bolts Of Panel And Making Of Pocket For Power Cable To Insert In Panel From Trench And Complete Filling Of Control RoomS Tranches By River Sand. 50 Erection & Testing Of 1 No. Single T / F Control Panel In Substation Control Room Including Grouting Of Anchor Bolts Of Panel And Making Of Pocket For Control Cable To Insert In Panel From Trench And Complete Filling Of Control RoomS Tranches By River Sand. 51 Termination Of 11 Kv 3X300sqmm Size Xlpe Cable By Filling 11 Kv Heat Shrinkable Type Cable Boxes Including Proper Connection With Lv Side Of Transformer To Switch Gear Panelsby Providing Suitable Connectors. 52 Termination Of 11 Kv 3X185sqmm Size Xlpe Cable By Filling 11 Kv Heat Shrinkable Type Cable Boxes Including Proper Connection With Lv Side Of Switch Gear Panels To Double Poles Out Side S / S By Providing Suitable Connectors. 53 Hoisting Of 11 Kv Cable On Dp In Gi Pipe. 54 Painting Of The Fabicated Structures With One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Alumm. Paint / Green Paint Of Isi Mark Alongwith Earthing Strip Above Ground Level. 55 Shifting And Dragging Of 33 / 11 Kv 5 Mva Transformer From Road Side To Its Plinth Alongwith Its Erection Including Fixing Of All Assessories And Top-Up Of T / F Oil. 56 Repairing And Replacement Of Damage Gasket, Bushing Rod, Bushing .Breather, Silica Gel Etc By Repalcement. ( In Case Of Old & Used 5 Mva T / F ) 57 Centrifusing Of Transformer Oil In Case Of Old & Used Power Transformer. 58 Providing Of Rubber Matting Sheet 8 / 10Mm Of Good Quality As Per Standard Specification. 59 Comlete Repairnig Of Swichyard Fencing. 60 Part ( B ) - 11 Kv Line 61 Carriage Of Following Line Material For 11Kv Line From Store Centre To The Site Of Work Including Measuring, Weighing, Loading, Unloading At Both Ends And Proper Stacking At Safe Site 62 Stp 11Mtr. Long 63 11 Kv Cross Arm Channel V Type 64 11 Kv Pin Insulator 65 11 Kv Pin With Nut 66 11 Kv Disc Insulator 67 11 Kv Disc Fitting 68 Acsr Raccon Conductor 69 G.I. Wire 8 Swg 70 Stay Set Complete 71 Earthing Complete 72 Lt Xlpe Cable1x240 Mm 73 11 Kv 3X185mm Xlpe Cable 74 11 Kv 3X185mm Xlpe Cable Jointing Kit O / D 75 11 Kv 3X185mm Xlpe Cable Jointing Kit S / Through 76 Gaurding Angle 1.6Mtr. Long 77 M.S Angle Lron 65X65x6mm, 4300Mm Long @ 5.8 Kg / Mt ( Bracing ) 78 M.S.Channel 100X50x2240mm @ 9.6Kg / Mt. ( Top Channel & Dropper ) 79 F- Bracket With Bolt & Nut 80 Cross Arm Holding Clamp 81 Ms Channel 125X65x1300mm Tee Off 82 Erection Of The Following Supports Including Cutting, Making Holes, Fixing Of All Types Of Accessories Digging Of Pits Complete In All Respect, As Per Resspo Drawing. All Types Of Clamps, Nut, Bolt Washers And Stone Pad Would Be Provided By The Contractor. 83 Single Support Of S.T Pole 11 Mtr Long. 84 Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 85 End Type Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 86 Cable Exposer Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 87 Concreting Of Supports At The Time Of Erection Of Pole In 1:4:8 Concrete Ratio From Bottom Of Pole To Ground Leveland Plinthing Of Supports Upto 300Mm Above Ground Level By Using Cement, Sand & Coarse Aggregate In Ratio 1:4:8 As Per Resspo Drawing With Watering / Curing Properly Upto Proper Setting Of Plinthing. All Matrial Would Be Provided By The Contractor. 88 Erection Of Stay Set With Stay Wire, Stay Clamp & Stay Insulator Including With Grouting Of Stay Set By Concrete Of Ratio 1:4:8 As Per Resspo Norms Before Back Fitting Of The Pits Including Binding, Climbing, Clamping, Tightening And Nozzeling Of Stay Wire In All Respect As Per Resspo Norms. All Clamps, Nuts, Bolts, Stay Insulator, Cement. Brick, Ballast, Sand Etc Would Be Provided By The Contractor. 89 Laying And Sagging Of 3 Phase Acsr Raccon Conductor From Double Pole At 33 / 11 Kv Substation To Double Pole At Tapping Point Of 11 Kv Feeder Line Including Jumpering, Hoisting, Fixing Of All Type Of Insulators, Binding, Jointing And Its Clamping Etcin All Respect. 90 Earthing Of Each S.T Poles Of The Line Is To Be Done By Inserting The Ms Earth Rod ( 1800X20mm ) Into Soil By Hammering And Properly Fastning With Gi Wire To Each Support By Nut & Bolt. Earthing Rod Must Be 0.15Mtr.Above From The Plinth Of The Support. All Type Nut & Bolt Would Be Given By The Contractor. 91 Guarding Of Ht / Lt / Telephone Line / Road / River Crossing Etc. By Providing G.S Earth Wire 7 / 16 Swg / Gi Wire No. 8 / 10 And Making Net With Difference Of 1.00 Mtr. Completely Including Fixing Of Channel / Angle Etc. With Proper Locking At Each Support As Per Resspo Norms. All Type Nut &Bolts, Would Be Given By The Contractor. 92 Fixing Of Danger Board And G.I Barbed Wire On Each Pole Including Proper Clamping. All Material Would Be Provided By Firm. 93 Write Serial Number On Each Pole In English With Black Paint In Yellow Paint Background. All Material Would Be Provided Be Firm. 94 Laying Ofdouble Circuit 11 Kv 3X185 Sq. Mm Xlpecable In Normal Soil By Digging Of Trench 1250 Mm Deep, 750 Mm Wide Including Supply Of Required Material As Fine Sand, 1St Class Bricks, Stone Slab. Interaxial Spacing Between The Two Cable Should Be In Between 0.25 M To 0.40M. The Two Cables Should Be Seprated By A Partition Of Single Bricks ( All Thematerial Required For Laying Will Be Supplied By Thecontractor Except 11 Kv Xlpe Cable ) 95 Cable Laying By Drill Method In Single Circuit 96 Hoisting Of 11 Kv 3X185 Sq. Mm. Xlpe Cable On Double Pole In Gi Pipe Including Its Jumpering Complete Along With Cost Of A Class Gi Pipe Of Size 6 Dia 3 M Long, Clamps, Nuts And Bolts. 97 Fixing Of 11 Kv 3X185sqmm O / D & S / Th. 98 Painting Of Following Support Of Existing 11 Kv Line With One Coat Of Red Oxide Primer And Two Coats Of Aluminium White Paint Of Isi Mark And Top Danger Portion Of Each Support Must Be Painted By Providing Two Coat Of Post Office Red Paint ( 1.5Mtr Upper Portion Of Support. ) Paint And Material Would Be Given By Contractor To Complete Of Work. 99 Single Pole Structure Of 11 Mtr. St Pole. 100 Double Pole Structure Of 11 Mtr. St Pole. 101 Clearing Of The Line Route By Cutting Of Tree Branches During Erection Of Line And Also Upto The Time Of Energisation Completely As Per Direction Of Site Incharge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
32.
Rural Development #10733231 Price Bid
Conservation And Beautification Of Waghapur Lake Tal. Bhudargad Dist. Kolhapur- 1 Sub-work No. 1 -Desilting, Deweeding and Dewatering Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material up to a distance of 50 metres beyond the building area and stacking as directed ,including dewatering, preparing the bed for the foundation and necessary back filling with a vailable earth / murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 2 Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and backfilling with available earth soil / murum watering, ramming etc. complete. (Lift upto 1.5m) By Mechanical Means 3 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary forfoundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. ( prior approval of Super intending Engineer will be necessary) 4 Desilting the Lake in wet or dry condition excluding Conveying materials obtained from Lake beyond the work site, stacking, spreading,etc. complete 5 Conveying materials obtained from Lake including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves,grade sand section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500 m. inclusive, from the site of excavation to the site of deposition as directed.20 % to Farm 6 80 % to Dump Yard 7 Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and a like grass along roadside making the ground clean by showel and phavaras etc. complete. 8 Sub Work No. 2 - Gabion Wall Providing and Constructing gabion structure 1Meter high or required section madeup of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedged including placing inposition, fitting neatly with trap stone rubble (15 to 23 cm ) all loose ends to be securely tied (Excluding transportation) etc. complete. (In Dry condition and for under water installation extra cost to be considered) 9 Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. Layers including watering and compacting etc. complete. 10 Sub Work No. 3 - Earthen Bank Protection WorkExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 11 Excavation for foundation in hard murum and Boulders including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) By Mechanical Means 12 Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / ganite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 13 Providing andl aying Cast in situ / Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is tobe provided ( Excluding reinforcement and structural steel ) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 14 Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 15 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars,bindingwith wires or tack welding and supporting as required complete. 16 Filling in plinth and floors with approved excavated material in 15 cm. to 20cm. Layers including watering and compacting etc. complete. 17 Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc. complete. 18 Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. 19 Sub Work No. 4 - Ghat Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 20 Excavation for foundation in hard murum including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) By Mechanical Means 21 Providing soling using 80 mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 22 Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap / granite / quartzite / gneiss metal in foundation including necessary formwork, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) 23 Providing and laying insitu / ready mix M-20 cement concrete of trap / granite / quartzite / gneiss metal for approach slab / Rigid pavement including compacting ,finishing, curingetc. complete. (excluding reinforcement ) (with reversible drum type mixer /concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) 24 Providing selected hard murum filling including laying in layers of 15 to 20 cm with watering and compacting etc. complete. 25 Providing andl aying Cast in situ / Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is tobe provided ( Excluding reinforcement and structural steel ) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 26 Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 27 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars,bindingwith wires or tack welding and supporting as required complete. 28 Sub Work No. 5 - Stone Pitching Excavation for foundation in hard murum and Boulders including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) By Mechanical Means 29 Providing selected hard murum filling including laying in layers of 15 to 20 cm with watering and compacting etc. complete. 30 Providing dry rubble stone pitching 23 cm (about 9 inch) thick including all material, quarry spalls, labour etc. complete. 31 Sub Work No. 6 - PathwayExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 32 Providing dry / trap / granite / quart zite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 33 Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening the mif special finishis to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 34 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram / Sq. cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 35 Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap /granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items in cluding bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed. ), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 36 Providing and fixing Guard Railing of 1000 mm height as per Type D Drg. No. 15 dt . 20 - 4 -79 , and fixed in 40 x 40 x 6 mm iron, angle embedded in 1:2:4 cement concrete bedding patti as per detailed drawing, with 3 coats of approved of yellow and black paint. 37 Sub Work No. 7 - Public Toilet BlockExcavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) 38 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd�A-3/259) 39 Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) 40 Providing and laying in situ Cement Concrete M-10 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) PCC M - 10 41 Providing uncoursed rubble stone masonry of trap/ granite/ quartzite/ gneiss metal in CM 1:5 for foundation of piers, abutments, wings etc. including bailing out of water, striking joints, scaffolding and watering etc. complete. 42 Filling in plinth & floors with approved excavated materials in 15 cm layers including watering &compacting complete 43 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) R.C.C. LINTEL-150 44 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 45 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Slab M200 46 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete(including cost of binding wire). (Bd-F- 17/306)TOR Steel 47 Providing and fixing M40 grade tick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S.65241983 having 6mm dia.bars3 Nos. And stirrups @ 250 mmc/cand fixing in wall with 6 Nos of hold fast of 12mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . 48 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron holdfast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. 49 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50mm thick with 3mm diameter mild steel bar reinforcement,of approved design on both side, fixing in cement mortar 1:3 and curing etc. complet 50 Providing internal cement plaster 12 mm thick in a single coat in C.M.1:3 without neru finish to masonry , concrete surface in all positions including scaffolding and curing complete. 51 Providing and laying matt finish ceramic tiles of having size 30 cmx 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 52 Providing and laying cement concrete flooring 40mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cmx30cm or other size laid diagonally/square etc finishing smooth (with extra cement )in any colour as directed and curing etc.complete.with Crushed sand VSI Grade 53 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to correspondng I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 54 Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black back lite seat with all necessary pipe connection etc. complete. 55 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm. x 30cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 56 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. 57 Providing and fixing on walls/ceiling/ floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portionetc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 58 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.complete. 59 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/ waste pipe and with necessary fxtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer 60 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 61 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 62 Providing and fixing Bib cock stop tap of brass heavy of 15 mm dia. At site of work 63 Providing and fixing partition with kadappa stone of all size sand 25 mm thick polished on both side and edge stoorig in a lncluding fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete. 64 Name plate with wording as directed on plastered srface in oil painting 65 Providing and fixing orissa type colour glazed earthen ware 625x450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the outside face of wall including 100mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. 66 Sub Work No. 8 - Compound Chainlink FencingProviding and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle ( 50 x 50 x 6mm ) postat 2.5 m c/c including excavation of pits of foundation concrete fixing the posts in (1:4:8) cement concrete block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc.complete 67 Sub Work No. 9 - Beautification Work(Environmental Awareness, Benches, Solar Street Light, Dustbin, Sign Board, Open gym, Children Play Equipment) Providing and fixing VIP Bench CI Frame height 5.48 mêter and weight 30 kilogram Decorative Leg, Seat plates FRi Patrujan hot press size metre x 1.20 metre long, wood finish, both side PP Cap for fixing 12.5 milimeter Stainless steel Nut bolt toatal 9 seat plates etc complete. 68 Providing and Fixing Solar Street light. Power Output > 75 Wp at 16.4 +- 0.2 Volts at STC,Battery Capacit > 12.8V (nominal), 30 Ah at STC (1 Day Autonomy), Type of LED 20 Watt white LED Type,Ingress Protection IP 65 or Better,Indicator on The system - 2 LED Indicators Red and Green. 69 Providing and Fixing Pegwin Shape dustbin FRP 3 feet height, baok side door size 1 feet x 1 feet for removing garbage in fixing concrete etc. complete. 70 Providing and fixing road junction/ information sign boards of size 1.80 x 1.20 Meter Prepared 16 guage M.S.sheet on frame of size 40x40x5 mm with cross bracing of size 35x35 x 5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral /arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection includingtwo angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc. complete.Mild Steel Board with Engineering Grade. 71 Providing and fixing informatory sign boards of size 0.90 x 0.60 m made out of 14 guage Aluminum sheet bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including on frame of with angle iron frame of size 35 x 35 x 5 mm and two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in 1:4:8 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Alluminium sheet Type IV High Intensity Micro Prismatic Grade Sheeting 72 Providing and Fixing Open Gym Equipment.Providing and fixing Sit Up Board made from B class Galvanized Iron. pipe. The main frame is of 25 millimeter Nota bene made from C Class Galvanized Iron. Pipe, Perforated sheet of 2 millimeter thickness is welded on main frame. The remaining frame of the sit up board is of 40 millimeter and 50 millimeter Nota bene made from C class Galvanized Iron. pipe. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat. The top coat is done using the best quality brand paint or duly powder coated. 73 Providing and fixing Sky Walker made from B Class Galvanized Iron.Pipe. The main frame is Diameter 80 millimeter made from C class pipe. The outer ring of sky walker is Diameter 32 millimeter made from C Class Galvanized Iron Pipe. For connecting the handle frame to main pipe Diameter 60 millimeter C Class Galvanized Iron Pipe is used. The bottom support of Mild Steel, round plate of Diameter 250 millimeter X 10 millimeter thickness is welded at bottom. The leg movement frame is of 50 X 50 millimeter X 2 millimeter thick cyclic redundancy check square pipe. The handle frame is of Diameter 40 millimeter made from C* Class Galvanized. Iron Pipe. The foundation used for fixing is 80 X 40 millimeter X3 millimeter thickness C-Channel. The footrests is made from Aluminum casting material, its sizes are 130 X 310 X 5 millimeter Closing caps made from top quality Fibre-reinforced plastic material with 2 millimeter thickness and Plastic cap are used. The pins used bearing of reputed make (SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of 25 millimeter The powder coat is done by Poly urethane and epoxy powder with 60 to 70 micron thickness. 74 Providing and fixing cross trainer made from B class Galyanized Iron.pipe. The center pipe is of 80 millimeter Nola bene made Tram C Class Galvanised Iron. pipe, and the bottom support of Mild Steel Round plate of 250 millimeter dare an a rat ho tomieter thickness is welded at bottom. The handle frame is made up 25 millimeter Nota bene C Class Galvanized Iron. Round Pipe. The foundation used for fixing is consists of three equal items that is. 100 millimeler Nota bene made from C Class Galvanised Iron. Round Pipo, Mild Steel Round Plate of 250 millimeter diameter and 10 millimeter thickness, 25 millimeter X 25 millimeter Mild Steel Angle of 3 millimeter Thickness. To join the Centre pipe and handle Frame Seamless Pipe of 50 millimeter origin destination and 3 millimeter Mild Steel Angle of 3 millimeter Thickness is used. For the movement, Bushes are used and for it 60 millimeter origin - destinatior and 3 millimeter thickness. The footrests is made from Fibre-reinforced plastic/C.1/Aluminum casting material, its size are 130 millimeter X 300 millimeter and 300 millimeter and 5 millimeter thickness. For support of Footrest of Cross trainer 130 millimeter X 300 millimeter with § millimeter thickness Mild Steel Plate and 50 millimeter X 50 millimeter cyclic redundancy check Square pipe with 3 millimeter thickness is used.Closing caps made from top quality Fibre-reinforced plastic material which is of 2 millimeter thickness. The pins used is made up of 25 millimeter diameter Harden bright bar. The bearings used are of 6205 permanent lubricated sealed bearing of reputed make. The handles used for cross trainer are of Rubber grip. The nut bolts used for assembly are made from S.S. material. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated 75 Providing and fixing chest press made from B Class Galvanized Iron. Pipe. The Center Pipe is of 100 millimeter MB made from C Class Number Galvanised Iron. Round Pipe, and the bottom support of Mild Steel Round plate of 250 millimeter and 10 millimeter thickness is welded at bottom. The remaining frame is made up of 40 millimeter Not bene C class Galvanized Iron. Pipe. The handle frame is made up of 25 millimeter Nota bene C* Class Galvanised Iron. Pipe, The seat frame is made up of 40 millimeter Nota bene and 50 millimeter Nota bene C class Galvanized Iron. Pipe. For the assembly different bushes are used for fixing is consists of three equal items that is. 100 millimeter Nota bene made from C Class Galvanized Iron. Pipe, Mild Steel Round plate of 250 millimeter dia and 10 millimeter thickness and 25 millimeter X 25 millimeter X3 millimeter Mild Steel angle. The seats is fitted on the outer frame is made up of high quality Fibre-reinforced plastic material of size 330 millimeter X 330 millimeter of thickness 3 millimeter and Mild Steel Plate of thickness 5 millimeter and size 250 millimeter X 200 millimeter is used to support it. Closing caps are made from top quality Fibre-reinforced plastic material which is of 2 millimeter thickness. The pins used are made up of 25 millimeter and 17 millimeter dia solid bar. The bearing used are 6205 and 6203 permanent lubricated sealed bearing of reputed make. The nut bolt used for assembly are made from stainless steel material. The serclips used for assembly is of 25 millimeter diameter. The Poly Urethin plastic bush is used for handling. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated 76 Providing and fixing Back extension made from B Class Galvanized Iron Pipe. The main frame of diametre 90 millimeter made from C Class Galvanized Iron Pipe, and the leg movement frame is of diameter 40 millimeter made from C Class Galvanized pipe. The handle frame is of diametre 32 millimeter made from C class Galvanized Iron Pipe. The seats is fitt a on the frame is made up of high quality FRP material of size 330 millimeter × 300 millimeter of thickness 3 millimeter and Mild Steel Plate of thickness 5 millimeter and size 250 millimeter × 200 millimeter is used to support it. The Foundation used for fixing is consists of 25 millimeter × 25 millimeter Mild Steel angle of 3 millimeter thickness. The footrests. is made from Aluminum casting material, its sizes are 130 millimeter x 310 millimeter x 5 millimeter. For the support diameter 32 millimeter made from C Class Galvanized Iron Pipe. closing caps made from top quality FRP material with 2 millimeter thickness. The powder coat is done by Poly urethane and Epoxy powder with 60 to 70 micron thickness. 77 Providing and fixing Rower made from B Class Galvanized Iron. Pipe, The main frame is 80 millimeter X 40 millimeter and 40 millimeter X 40 millimeter cyolio redundancy check Pipe with 2 millimeter thickness. The handle frame Is of 25 Nota bene made from C class Galvanized Iron. Pipe. The Foundation used for fixing consists of three equal items that is. 40 millimeter Nota benc made from C class Galvanized Iron. Pipe, C channel of 75 millimeter X. 40 millimeter X 5 millimeter and 25 millimeter X 3 millimeter Mild Steel angle. To join the movement frame to main frame seamless pipe of 50 millimeter diametermeter and 3 millimeter thickness is used. The seats which are fitted on the main frame is made up of high quality Fiber-reinforced plastic material of size 330 millimeter X 330 millimeter of thickness 3 millimeter and Mild Steel plate of size 250 millimeter X 200 millimeter X 5 millimeter is used to support it. Closing caps are made from top quality Fiber-reinforced plastic material which is of 2 millimeter thickness. The pins used are made up of 17 millimeter diametermeter hardened bright bar. The bearings used are of 6203 permanent lubricated sealed bearing of reputed male. The handles used are of Rubber grip. The nut bolts. used for assembly are made from Stainless Steel material. The bushes (Stoppet) used to avoid the collusion made from poly urethane plastic material of 50: millimeter diamefermeter The serclips used for assembly is of 17 millimeter diametermeter. The foundation pipes are embedded in Cement Concrete stock and painting is done by attractive color spraying after proper surface treatment, shot blasting and intial coat of yellow primer surface is plied before top coat. ithe top. coat is done using the best quality brand paint or duly powder coated. 78 Providing and fixing uneven bar made, from B class Galvanized Iron Pipe. The main frame is: 115 milliteter-diametermeter made from C class pipe and. the bottom support: of Mild Steei Round Plate of Diametermeter 250 millimeter and 10 millimeter thickness is welded at bottom. The handle frame istof diametermeter 40 millimeter made from C class Galvanized Iron Pipe. The foundation ised for fixing is consists of three equal item that is diametermeter 90 millimeter made from C Class Galvanized Iron, Mild Steel Round Plate of diametermeter 250 millimeter and 10 millimeter thickness and 25 millimeter × 25 millimeter mild steel angle of 3 millimeter thickness. Closing caps are made from top quality Fiber Reinforcement Plastic material which is of 2 millimeter thickness. The Powder coat is done by Poly urethane and epoxy powder coat with 60 to 70 micron thickness. 79 Providing and fixing Weight Lift as directed by engincer-in-charge 80 Providing and fixing combination leg press + standing twister + seating twister as directed by engineer-in-charge 81 Providing and fixing Air walker made from B class Galvanized Iron pipe. The center pipe is of 80 millimeter Notabene made from C Class Galvanized Iron pipe, and the bottom support of Mild Steel round plate of 250 millimeter diameter & 10 millimeter thickness is welded at bottom. The leg movement frame is of 40 millimeter NB made from C Class Galvanized Iron pipe. The handle frame is of 25millimeter Notaben made from C Class Galvanized Iron pipe. The foundation used for fixing is consists of three equal items i.c. 80millimeter Notabene made from C Class Galvanized Iron pipe, Mild Steel Round plate of 250 millimeter diameter & 10millimeter thickness & 25millimeter X 25millimeter Mild Steel angle of 3 millimeter thickness. To join the centre pipe & leg movement frame seamless pipe of 60 millimeter diameter & 3millimeter angle of 3millimeter thickness. To join the centre pipe & leg movement frame seamless plpe of 60mlllimeter diameter & 3millimeter thickness & 60millimeter thickness.. The footrests is made from FRP/Cast Iron /Aluminum casting Hamaterial, its sizes are 130millimeter X 300millimeter X Smillimeter. For the support 50millimeter X 50millimeter X millimeter CRC square pipe is used. Closing caps made from top quality Fiber Reinforced Plastic material with 2 millimeter thickness. The pins used are made up of 25 millimeter diameter bright bar. The bearings used are6205 permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from Stainless Steel material. The serclips used for assembly are made from Stainless Steel material. The serclips used for assembly are of 25millimeter diameter. The foundation pipes are embedded in Cement Concrete, stock and painting is done by attractive color spraying afler proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint orduly powder coated 82 Providing and fixing Parallel bar of height 1.3 meter Galvanised Iron Pipes of A Class quality. The frathe of the parallel bar shall be of 40 milimeter Nominal Bore pipe. The vertical support pipe shall be embedded with holdfast in Cement Concrete:block of 0.3.X 0.3 X:0.3 meter below ground level. The total play area for the equipment shall be 0.9 X 0,5 meter painting is done by spraying after proper surface treatment and an initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. 83 Providing and fixing Super Max Multi Play System made for roto moulded FRP 4 Tanel slide 1.9 feet dia, with FRP panel made for roto moulded FR$ Tanel Spiral Slide 1.50 metre height, 6 feet length tanel bridge, FRP Panel, canopy made for roto moulded FRP size 3 x 3 feet with 7 feet length ladder including railing 25 millimeter NB Pipe, 10 feet height 80 millimeter diameter Tower Pol, 2milimeter thick platform percoated sheet size 3 x 3 feet, High Tension Blackning, Tanel Slide leg 40 millimeter pipe, Spiral slide main support 75 millimeter dia 5 feet length, all mild steel material used in P.P. Grade powder coating with forpeting process excetra complete 84 Providing and fixing Double Swing with 9 feet leg using 38 millimeter NB Pipe, 10 feet: Top Bar lengch 50 milimeter ISI Mark NB Pipe, Rubber Coated Chain with Suspension, attached rubber sheet, including S type Hook, moulded bearing clarap, P.P. grade powder coating with fospeting complete. including welding and handling charges with mild steel pocket excetra complete. 85 Sub Work No. 10 - Afforestrtion / Plantation -Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means 86 Filling fresh garden soil /silt & manure in excavated area including lead upto a distance of 50 mtrs (1/10 of unskilled labour) 87 Preparing Lawn:- Excavating the ground to a required depth of 30cms.removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure are in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly, well, levelling, watering on previous night. Planting required variety of lawn grass (Cynadon or paspallum) as directed and maintaining till well established by watering, weeding, clipping, rolling etc.complete 88 Preparing flower bed :- Hibiscus (8 x 10) Excavating the ground to required depth of 30cms removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proportion to a height of 40cms. Mixing garden soil & manure thoroughly well, levelling, watering on previous night. Planting well rooted shrubs 0.5 meters apart as directed and maintaining till well established by watering,weeding, stirring, replacing casualties etc.complete. 89 Preparing Shrubbery :- Plumeria Rubra (21 x 21) Excavating the ground to required depth of 30cms removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & MAnure in excavated area in 3:1 proportion to a height of 30cms.Mixing O garden soil & manure thoroughly well, levelling watering on previous night. Planting well rooted shrubs 0.5 meters apart as directed and maintaining till well established by atering,weeding, stirring, replacing casualties etc.complete 90 Mogra Plant/Creepers /Climbers -Excavation pit with size 0.30x 0.30x 0.30 removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.15 mt with fresh garden soil and manure in 3:1 propration.Mixing soil and manure thoroughly well levelling,watering on previous night .planting one or two year old healty plant as per specification Maintaning till well established by watering etc,complet , weeding pruning, sirring replacing casualties. Gardenia Lasmirals (Motha Mogara) 8 x 10 91 Jasmin (Mogara) 8 x 10 92 Planting large flowering /shady trees (ht.1.00 mt): Digging pit with size 0.9 m x 0.9 m x 0.9 m, removing and conveying unwanted stuff to a required distance as directed Filling the pit with approved excavated material upto to a height of 0.30 m and reamaining height of 0.60 m. with fresh garden soil and manure in 3:1 proporation mixing soil and manure throughly well leveling, as directed watering, previous night, planting two to three year old minimum 1.00 mtr height, helthy trees spaling as per specefications, Maintaing till well established by watering weeding,sirring of soil replacing of casualties etc complete, Delenia indica (Green Chafa) 21 x 21 93 Planting large flowering /shady trees (ht.2.00 mt): Digging pit with size 0.9 m x 0.9 m x 0.9 m, removing and conveying unwanted stuff to a required distance as directed Filling the pit with approved excavated material upto to a height of 0.30 m and reamaining height of 0.60 m. with fresh garden soil and manure in 3:1 proporation mixing soil and manure throughly well leveling, as directed watering, previous night, planting two to three year old minimum 2.00 mtr height, helthy trees spaling as per specefications, Maintaing till well established by watering ,weeding,sirring of soil replacing of casualties etc complete. Delonix Regia (Gulmohar) 14 x 16 94 Planting small and medium size ornamental /flowering plant Planting small and mediumsize ornamental or flowering plant. Digging pit with size 0.6 m x 0.6 m x 0.6 m, removing and conveying unwanted stuff soil and Farm Yard Manure up to a height of 0.60 m in 3:1 proportion, mixing soil and manure thoroughly well, leveling and watering previous night. Planting one or two year old healthy plant saplings as per specifications. Maintaining till well established by watering. Stirring of soil and manure, replacing of casualties etc. completePeepal 8 x 10 95 Rubber Plant 10 pot 96 Moringa (Shevga) 5 x 6 97 Sonchafa 8 x 10 98 Supply and installation of drip irrigation system all along the plantation /lawn area including all components and accessories etc complete 99 Bamboo Golden 13 x 13 - Excavation pit with size 0.30x 0.30x 0.30 removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 40 cm with fresh garden soil and manure in 3:1 propration.Mixing soil and manure thoroughly well levelling,watering on previous night .planting one or two year old healty plant as per specification Maintaning till well established by watering etc,complet , weeding pruning, sirring replacing casualties 100 Evergreen perennial typically grown- Excavation pit with size 0.25 x 0.25 x 0.25 removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 80 cm with fresh garden soil and manure in 3:1 propration.Mixing soil and manure thoroughly well levelling,watering on previous night .planting one or two year old healty plant as per specification Maintaning till well established by watering etc,complet , weeding pruning, sirring replacing casualtiesCanna (Kardal) 5 x 6 101 Snake Plant 10 pot 102 Arecaplam 13 x 13 103 Spider lilly 5 x 6 104 Weeping Fig 6 pot 105 Tulsi 5 x 6 106 Providing labour for plantation of different types of plants and trees, include excavating pit, watering the plant etc. Complete Mali 107 Mazdoor - Unskilled Heavy Male 108 Tree Cutter - Semi Skilled
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
33.
Public Administrative Department #10714170 Price Bid
Civil Work For Auditorium For Nagar Parishad, Dausa, Rajasthan Civil Work For Auditorium For Nagar Parishad, Dausa, Rajasthan EARTH WORKClearing Grass and Removal of Rubbish (Maximum 150mm) by manual means and disposal at a lead of 50 metres as per MoRT&H specification clause 201. 2 Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). In all type of soil. Upto 3.0 m depth. 3 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m. 4 Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.1.1 5 In ordinary rock. Depth upto 1.5 M. 6 Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.2.1 7 Carriage of Materials by mechanical transport including loading, unloading and stacking ::Upto 1 Km 8 Stone, boulders, gravelly materia 9 Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 10 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). 11 Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRT&H specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including all material, labour, machinery as per clause 710.1.4 of IRC:78 and clause 2200 of MoRT&H specification. 12 CONCRETE WORK 13 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 14 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 15 REINFORCED CEMENT CONCRETE 16 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix). 17 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (As per design mix) 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-30 Grade Concrete. 19 Reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folded plate and roofs having slope more than 15° upto two stories excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 20 Providing and laying upto two stories reinforced cement concrete in kerbs, steps and the like excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 21 Add extra for laying reinforced cement concrete above two stories (or 7.50 mtr height above plinth level) for every one storey or 3.00 m height or part thereof. 22 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 23 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 24 Suspended floors, roofs, landings, balconies and access platform. 25 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 26 Columns, Pillars, Piers, Abutments, Posts and Struts.22.1.5 27 Stairs, (excluding landings) except spiral-staircases. 28 Extra for shuttering in circular work (20% of respective centring and shuttering items). 29 Edges of slabs and breaks in floors and walls. Under 20 cm wide. 30 Weather shade, Chajjas, corbels etc., including edges. 31 Add extra for doing centering and shutteriing work for every additional height of 1 metre or part thereof beyond initial 7.5 metre height from plinth level. 32 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 33 BRICK / STONE MASONERY WORK 34 Brick work with FPS bricks of class designation 75 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). 35 Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand). 36 Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:3 (1 cement :3 coarse sand). 37 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 38 Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand). 39 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black Above 3601 Cm2 Slabs. 40 Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work. Moulding. 41 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 42 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 43 Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles 44 Providing and fixing Motive pieces all coloures for glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. Size 200 x 300mm. 45 P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm. 46 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) Size 300mm x 450mm. 47 Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete. (excluding the the cost of cement plaster on wall and pillar). Size 600mm x 1200mm 48 38mm thick wood block flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete. 49 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 50 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone. 51 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 52 ROOFING 53 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase. 54 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m². 55 Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimetre 0.80 mm thick 56 Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 57 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine/ coarse sand) 58 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand). 59 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 60 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 61 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) toplayer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand). Design on outer plaster. 62 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 64 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 65 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. 66 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 67 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8193, density 16kg/m3 , 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 68 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron). 69 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. 70 Providing and laying expansion joint complete as per drawing and technical specification and as per clause 2605 of MoRT&H Specification including all material, labour, machinary etc. 71 Fillar joint with 20m thick compressible fibre board. 72 Fillar joint with Joint sealing compound with coarse sand and 6 %bitumen by weight. 73 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: Hot finished seamless type tubes. 74 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 75 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 76 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S. tube. 77 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 78 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure A : 30 mm thick Decorative teak veneer both side. 79 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured). Decorative teak veneer both side. 80 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) Rectangular or square. 81 Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area ofthe shutter to be measured). 82 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 50 mm long. 83 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia. 84 Providing and fixing to existing door frames. 30mm thick factory made solid both side Pre-laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded Pre-laminated PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side Pre-laminated PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification & drawing (for W.C. and bathroom door shutter). 85 ALUMINIUM WORK 86 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). 87 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). 88 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 25 mm thick 89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basicitem) : With float glass panes of 5.50 mm thickness. 90 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate. 91 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. 355 X 19 mm. 92 INTERIOR WORK 93 FALSE CEILING 94 Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I, 95 Sanitary Items 96 Plumbing 97 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 98 15 mm nominal bore with 3 cm length. 99 15 mm nominal bore with 45 cm length. 100 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 101 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 102 15 mm nominal bore 103 20 mm nominal bore 104 25 mm nominal bore 105 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 106 25 mm nominal bore Horizontal 107 25 mm nominal bore Vertical 108 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 109 Sanitary 110 Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Upto 300 mm dia. 111 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 112 100 mm dia. pipe 113 125 mm diameter pipe 114 Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 115 100 mm diameter pipe 116 125 mm diameter pipe 117 Supplying pig lead at site of work. 118 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter 119 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 120 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With bricks with class designation 75 121 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With bricks class designation 75 122 Providing and fixing square-mouth S.W. gully trap grade A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With bricks class designation 75. 123 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design With bricks. 124 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design With bricks 125 Fixtures 126 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. 127 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. 128 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 129 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 130 Rectangular shape 453x357mm 131 Rectangular shape 1500x450 mm 132 Providing and fixing 100 mm sand cast Iron grating for gully trap 133 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 134 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet 135 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore 136 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 137 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-incharge and finished smooth. Granite Stone of approved shade 138 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 139 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 140 Internal work - Exposed on wall 15 mm dia. nominal bore 141 Internal work - Exposed on wall 20 mm dia. nominal bore 142 Internal work - Exposed on wall 25 mm dia. nominal bore 143 Internal work - Exposed on wall 32 mm dia. nominal bore 144 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia. nominal bore 145 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 20 mm dia. nominal bore 146 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 147 15 mm dia. nominal bore 148 20 mm dia. nominal bore 149 25 mm dia. nominal bore 150 32 mm dia. nominal bore 151 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 152 15 mm dia. nominal bore 153 20 mm dia. nominal bore 154 25 mm dia. nominal bore 155 32 mm dia. nominal bore 156 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 157 15 mm dia. nominal bore 158 20 mm dia. nominal bore 159 25 mm dia. nominal bore 160 32 mm dia. nominal bore 161 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 162 15 mm nominal bore 163 20 mm nominal bore 164 25 mm nominal bore 165 WATER HARVESTING SYSTEM 166 Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia Nominal bore 167 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work. 200 mm dia 168 Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. 169 Providing & lowering of G.I. flange pipe B Class including rubber washer and nuts of 8 mm dia complete in all respect. 50 mm dia 170 Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. 171 ELECTRICAL G-SCHEDULE 172 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & its accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 173 Short point (up to 3 mtr.) 174 Medium point (up to 6 mtr.) 175 Long point(up to 10 mtr..) 176 Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 177 Short point (up to 3 mtr.) 178 Medium point (up to 6 mtr.) 179 Long point(up to 10 mtr..) 180 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & its accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 181 On board 182 Short point (up to 3 mtr.) 183 Medium point (up to 6 mtr.) 184 Long point(up to 10 mtr..) 185 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 186 20 mm 187 25 mm 188 32 mm 189 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 190 3x 1.5 sq.mm 191 2 x 2.5 sq. mm. + 1x1.5sqmm 192 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 193 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 194 4 x 10.0 sq.mm 195 4 x 16.0 sq.mm 196 Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existingsurface or recessed conduit/casing capping including making connections as required. 197 RG - 6 198 RG -11 199 Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS-112C &113 C of approved make in existing surface or recessed conduit/casing capping. 200 Unarmoured 2 pair 201 Unarmoured 10 pair 202 Unarmoured 20 pair 203 Unarmoured 50 pair 204 Jelly filled armoured (PIJF) 5 pair 205 Jelly filled armoured (PIJF) 10 pair 206 Jelly filled armoured (PIJF) 20 pair 207 Jelly filled armoured (PIJF) 50 pair 208 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) Per phase isolation 209 2+8 Way 210 2+12 Way 211 Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 212 2.5 Sq. mm 4 core 213 4.0 Sq.mm 4 core 214 6.0 Sq.mm 4 core 215 10.0 Sq.mm 4 core 216 16.0 Sq.mm 4 core 217 25.0 Sq.mm 3.5 core 218 35.0 Sq.mm 3.5 core 219 50.0 Sq.mm 3.5 core 220 70.0 Sq,mm 3.5 core 221 95.0 Sq.mm 3.5 core 222 120.0 Sq.mm 3.5 core 223 150.0 Sq.mm 3.5 core 224 240.0 Sq.mm 3.5 core 225 300.0 Sq.mm 3.5 core 226 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 227 3.5 x 25.0 sq.mm 228 3.5 x 35.0 sq.mm 229 3.5 x 50.0 sq.mm 230 3.5 x 70.0 sq.mm 231 3.5 x 95.0 sq.mm 232 3.5 x 120.0 sq.mm 233 3.5 x 150.0 sq.mm 234 3.5 x 240.0 sq.mm 235 3.5 x 300.0 sq.mm 236 4 x 2.5 sq.mm 237 4 x 4.0 sq.mm 238 4 x 6.0 sq.mm 239 4 x 10.0 sq.mm 240 4 x 16.0 sq.mm 241 Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. Hot Dipped Galvanized. 242 150mm x 50mm x 1.6mm 243 300mm x 50mm x 1.6mm 244 450mm x 50mm x 2.0mm 245 600mm x 50mm x 2.0mm 246 Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 3000 mm long , 80/40 mm , terminal 14 mm G.I. strip 247 S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 248 8 SWG copper Wire 249 25mm x 3mm copper strip 250 50mm x 6mm copper strip 251 25mm x 3mm G.I. ( Hot Dipped) Strip 252 25mm x 6mm G.I. ( Hot Dipped) Strip 253 P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. ( supplied together with luminaire) Power consumption of =< 7w/10w/8w/12w/15w/18W with 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100 lm / Watt output suitable to replace 1x18W/ 2x18w/2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance. 254 Recessed mounting LED Downlight 18/20W 255 Surface Mounting LED Downlight 18/20W 256 P & F of IP20 LED Ceiling/ Recessed/ suspended mounting light fixture made form CRCA sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.High efficiency driver electronics having efficiency > 85% and in compliance to IEC standards.(integral driver). Power consumption of 40 W/50W/60W, 3000/3300/4200 lumens, system lumen efficiency of 70-80 lm / Watt output suitable for 2x36W FTL/ 2x36w CFL/3x36w CFL light fixtures, life time of 50000 burning Hours with 70% intial Lumens maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance. Surface Mounting 36W LED Light 2’x2’ with acrylic/ prismatic front cover 257 P & F energy efficient direct fit (Retrofit) LED tube system (with integral driver), on existing fixture. Power Consumption of18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K& 6000°K. 4 LED Tube shape fixture 18W. 258 P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries LED street light fixture 150 watt 259 Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. 9 Mtr. 260 Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014. Transformers described as above and as per the following continuous rating. 315KVA 261 Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 11 KV Incomer VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 25KA/3 and IAC A-FLR for 25kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 11 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-12 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on incomer, Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ratio with sec 1 of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter. 262 SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity : Radiator cooled and turbo charged 250 KVA at 0.8 pf 415V 50Hz 3-?. 263 Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i) Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii) Provision for fixing of combined CT PT Set (To be supplied by DISCOMs) (iii)TT Block (iv) 6mm Bakelite sheet on all sides. 264 Supply, Installation, testing and commissioning of 11 KV Double Pole structure With Air Break SWITCH having following specifications : (a) DP : Double pole structure made of two nos. 9 meter long PCC poles (400 Kg) & 7 nos. MS Channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per REC standards in all respect with nuts, springs washers, clamps as required. (b) GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3 phase, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 Nos pin insulator ,GI pipe of suitable length for operation.c) DO: 3 Nos. Horizontal/Vertical mounted 33KV Horn Gap fuse set / Drop Out fuse set, 33KV barrel fuses mounted on 6 Nos. Post insulators. (c) DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) LA:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required. (e) JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’ 265 FIRE ALARM G-SCHEDULE 266 SITC of microprocessor based 2 - wire loop (each loop accessing 90 addressable units ) Fire Alarm Control Panel. The Panel shall be able to give pin point location of addressable units via the address code for each unit. The Panel shall also be able to automatically switch off all control switches when-ever any Alarm is triggered. The Panel shall also be able to give voice announcement to individualized speakers. The Panel shall have built in sounder, Maintenance Free Batteries of minimum 15 Ah of 24 volts capable of minimum of 12 hours with battery charger, rectifier. Loop cards, LCD unit to indicate Fire / Fault Signal of individual unit, built in-built / external printer, to log all incoming data etc complete in all respect. 2-LOOP. 267 SITC Manual Call Point complete with , Glass, hammer and chain etc as required: Analogue addressable type 268 SITC Automatic commendable Control Switches for shutting downAC Plant, Power Supply, Gas Supply etc. Response Indicators. 269 SITC Fault Isolators for isolating shorted, dead wire and loose circuits between two successive Fault Isolators with automatic resetting arrangement. Analogue addressable type. 270 FIRE FIGHTING G-SCHEDULE 271 Sub Head - I - (Wet Riser System - Pumping Equipments)SITC of electric driven Sprinkler / Hydrant pump Suitable for automatic Operation consisting of the following-(A) Horizontal multi stage Centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary sluice value on the suction side ( all items to be matching the suction side of the pump) and pressure gauge sluice value and non return valve on the delivery side side ( all of the necessary dia) and including bypass arrangement for testing of pump.(B) Squirrel cage induction motor suitable for 415 V, 50 HZ, Ac supply of below mentioned HP for the above pump ,1450 RPM T.E.F.C confirming to IP:55 and flexible coupling and coupling guard with the pump. (C) Common bed plate fabricated from mild steel channel or cast iron type1620 LPM at 70 Mtr Head ( 50 HP Motor) 272 SITC of diesel engine drive Standby Pump suitable for automatic operation consisting of the following A, B, C. .The Diesel driven pump shall be suitable for following discharge:(A) Horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, sluice value on the suction side (all items shall be matching the suction side of the pump) and pressure gauge, sluice valve and non return valve on the delivery side (all of the necessary dia) and including bypass arrangement for testing of pump.(B) Water cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump, d cushy foot, damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically with a unit of battery of 12/24v, 88 Ah, 13/21 plate, Exhaust Pipe of minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumpingset, Supply, installation, testing, & commissioning of electric driven automatic pressurization pump setC) Horizontally mounted single stage centrifugal end delivery pump of below mentioned discharge with necessary sluice valve on the suction side (all items matching the suction side of the pump) and sluice valve, non return value, pressure gauge on the delivery side including by pass arrangement for testing of the working of the pumping set as required.1620 LPM at 70 Mtr Head ( 50 HP Engine) 273 SITC of Jockey pump having Squirrel cage induction motor suitable for 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM T.E.F.C type confirming to IP:55 and flexible coupling and coupling guard with the pump ,Common bed plate of fabricated mild steel channel or cast iron type. 180 LPM at 70 Mtr (15 HP). 274 Supplying & Installing cylindrical type air vessel, 250 mm dia 1.5M high of thickness 6.0 mm M.S. complete with air release valve, safety valve, pressure gauge etc.along with two coats of Red Oxide and two coat of post office red enamel paint as required. 275 Providing & fixing 100mm dia pressure Gauge on Pump DeliveryLine complete with shut off cock. 276 SITC of pressure switches for Main, Jockey, and standby pumps,including necessary wiring UPTO control panel and stop valve. 277 Sub Head - II - (Hydrants System) 278 Providing and fixing single headed hydrant valves with flanged inletISI marked with 63 mm female instantaneous outlet of gun metalcomplete with blank cap and chain conforming to IS : 5290 279 Providing . 63 mm dia 15 M long reinforced rubber hose pipeconforming to IS : 636-1962, Part –A & ISI marked with Gun Metalmale & female coupling wire wound with the pipe. 280 Providing & fixing (1.0 M x .45 M x 0.6 M ) OUTDOOR HOSECABINET suitable for accommodating hydrants made of not lessthan 16 swg. M. S. sheet having central opening glazed doorincluding necessary locking arrangement, painting (one coat primer& two coats of paint ) and housing 2 Nos. RRL hose pipe, 1 Nobranch pipe. 281 Providing and fixing Swinging Drum type hose reel ISI marked 30M(L) x 20 mm (dia) rubber lined pipe with shut off nozzle of 6 mm diaincluding the cost of 25 mm dia pipe connection from riser to hosereel , all sockets, nipples, elbows and 25 mm globe valve. 282 Providing and fixing ISI marked Three Way fire Brigade Inlet to wetRiser with non return valve complete in all respects 283 Providing, fixing, jointing and testing of Heavy Gauge (C class ) MSPipe ISI marked with accessories like tees, elbows, flanged joints,reducers, compressed asbestos gaskets, nuts and bolts includingfixing the pipe with suitable flat iron strip clamps /bracket, paintingetc. Complete as required for delivery/ suction manifold relating tothe pump including painting of two coats of Red Oxide and two coatof post office red enamel paint including all civil breakages andmaking good the same : 284 200mm dia 285 150 mm dia 286 80 mm dia 287 Sub Head - III - (Piping, Valves and Accessories) 288 MS (Medium duty B class) pipe with cleaning,wrapping and coatingof the pipe as per IS; 10221 in all kind of soil at 1.0 M depthincluding excavation as required. 289 150 mm dia 290 100 mm dia 291 80 mm dia 292 Providing & fixing Butterfly valve with Cast Iron Body, Cast Iron Discand Seat of Nitrile Rubber Bonded on Bakelite with hard back to PN1.6 rating with following sizes complete with bolts, washers andcompressed asbestos gasket as required 293 150 mm dia 294 100 mm dia 295 80 mm dia 296 Providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 297 200 mm dia 298 150 mm dia 299 80 mm dia 300 Carbon Dioxide type fire extinguisher with cylinder fully charge of 4.5kg capacity. 301 Providing, fixing, testing & commissioning of sprinkler heads of thefollowing type : Pendant type with quartziod bulb, operating temperature at 68 deg Cas per specifications. 302 Providing & fixing 10 SWG chrome plated brass 100 mm diadecorative flanges / escutcheon plates to be fixed at junction ofSprinkler piping with the false ceiling. 303 Sub Head - III - (Piping, Valves and Accessories) 304 Sub Head - IV (Fire Electrical Control Panel) 305 Supplying and making end termination with heavy copper lugs (pin/ring type) duty crimped with crimping tool, PVC tape etc of followingsize 306 1.5 Sq.mm 307 10.0 Sq.mm 308 35.0 Sq.mm 309 Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. 100mm x 50mm x 1.6mm 310 BOUNDARY WALL G-SCHEDULE 311 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 312 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 313 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 314 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix) 315 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-30 Grade Concrete. 316 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 317 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 318 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars 319 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing. 320 Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand) 321 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 322 EARTH WORK 323 Dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 324 Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). In all type of soil Upto 3.0 m depth. 325 EXTERNAL DEVELOPMENT 326 Compacting original ground 327 Loosening upto a level of 500 mm below the subgrade level watered, graded and compacted in layers by vibratory roller 8-10 tonne to meet requirement of table 300-2 for subgrade construction as per MoRT&H specification clause 305.3.4. 328 Loosening and recompacting original ground below embankment including Loosening leveling and recompacting original ground supporting embankment to facilitate placement of of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling by vibratory roller 8-10 tonne so as to achieve minimum dry density as given in table 300-2 for embankment construction as per MoRT&H specification clause 305.3.4. 329 Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. 330 CEMENT CONCRETE PAVEMENTS 331 Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, compacting with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 332 Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-30. 333 Providing and laying cast-in-situ cement concrete M-20 grade kerb stone channel top and bottom width 115 and 165 mm respectively, 250mm high laid with kerb laying machine, on 150 mm thick PCC M10 grade foundation (laid manually) as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. Using Concrete Mixer. 334 Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. 335 Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. 336 Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP4 class (with s/s ends) IS: 458 - 2003 (amended up to date) marked and pipes from 300 mm and upto 1800 mm manufactured through vertical casting process at all depths with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets, lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as per specification and / or as directed by Engineer. Note : E/w to be measured and paid separately. 300 mm internal diameter. 337 Horticulture Work 338 Grassing with Doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 7.5 cm apart in either direction. 339 Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 340 Ficus panda 341 Tecoma capensis ( Ratanjot) 342 Clerodendron inermii ( Choti Aari) 343 Tabernaemontana variegated ( Chandni) 344 Hamelia patens ( Firebush, Thal Kamal) 345 Hibiscus variegated ( Guddal) 346 Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 347 Wedelia trilobata ( SunFlower Family) 348 Alternathera green (Parrot Leaf) 349 Iresine herbstii (Blood Leaf) 350 Ophiopogon Black ( Lily Turf, Mondograss) 351 Asparagus myerii (Fox Tail) 352 Lantana sellowiana 353 Rhoeo spathacea Compacta‘ ( Oyster, Boat Lily) 354 Golden duranta 355 Pennisetum setaceum (Fountain Grass)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 1
34.
Educational and Research Institute #10712345 Price Bid
Design And Installation Of Gas Distribution System And Chilled Water Distribution System , Dual Cylinder, Semi-Automatic Change Over Panel For Methane Gas , Single Cylinder Tmb/Diborane Gas Cabinet With Inbuilt Valve Manifold Box Of One Stick Inlet And 3 Stick Outlets , Single Cylinder Oxygen (O2) Gas Panel , Single Cylinder Argon (Ar) Gas Panel , Single Cylinder Nitrogen [High Purity] Gas Panel , Dual Cylinder Gas Supply Panel With Semi-Automatic Change Over For Nitrogen (Industrial Pure) Gas , Dual Cylinder, Semi-Automatic Change Over Panel For Hydrogen Gas , Air Compressor With It’S Components For Oil Free Compressed Dry Air (Cda) , ¼” Diaphragm Valve The Valves Shall Be Manually Operated And Made Of Ss316l According To Astm A276 Specifications. The Maximum Working Pressure Of The Valve Shall Be 10 Bar. The Valves Shall Bear Leak Integrity Of 10^-9 Mbar Lit/Sec. The End Connections Shall Be Vcr End. , ¼” Ball Valve The Ball Valves Shall Be Manually Operated And Made Of Ss316l And Of Single Piece Construction. The Maximum Working Pressure Shall Be At Least 10 Bar Or Above. The End Connections Shall Be Double Compression End. , ¼” Tube For Process Gases: ¼” Tube Stainless Steel Electropolished With Necessary Fittings And Supports , ½“ X ¼“ Co-Axial Tube For Tmb/Diborane Process Gas: ½“ (Bright Annealed), ¼“ Tube Stainless Steel Electropolished With Necessary Fittings And Supports , ½” Tube For N2(Industrial Pure) And Cda: ½“ (Bright Annealed) Stainless Steel With Necessary Fittings And Supports , ¼” Tube For N2(Industrial Pure) And Cda: ¼“ (Bright Annealed) Stainless Steel With Necessary Fittings And Supports , Gas Detector (Sil 2 Certified) For Ch4 And H2: Lel Gas Detector (Single Sensor For Both H2, Ch4) With Its Accessories. , Gas Leak Detection System With Centralized Controller For Gas Handling System With Related Cables, Wiring, Plc, Hmi Panel (7” Display Or Higher) With Controller Card And Other Accessories. , Gas Distribution System Installation By Means Of Orbital Welding Followed By Testing (Pressure Hold Test & Helium Leak Check (Tmb/Diborane, Ch4, H2, Ar, O2, N2 (High Pure) Followed By Validation (Trace Oxygen, Trace Moisture & Trace Particle)). The Gas Line Connections Need To Be Tested And Validated For Pressure Hold Test, For 24 Hours, Helium Leak, Up To 1 X 10-9 He Mbar Lit Sec-1, Trace Moisture, Tested For Less Than 5 Ppm Impurities, Trace Oxygen Tested For Less Than 5 Ppm And Particles, Up To 0.1-Micron Level. , Support Structure For Gas Tube Lines: Unistruts For The Support Structure (Gi), Cable Tray/Conduits For Single Cables , Tube Clamps (Moc Ss With Pvc/Pp Inserts) , Anchor Bolts & Nuts And Fittings (Required For Above Mentioned Gas Lines) , Dual Cylinder Holding Structure: For Ch4, H2 & N2 (Industrial Pure) *Structure Should Have A Canopy To Safeguard It From Rain As It Will Be Kept In Open Balcony. Individual Cylinder Capacity Is 47 To 50 Liters. , Single Cylinder Holding Structure: For Ar, O2 & N2 (High Pure) *Structure Should Have A Canopy To Safeguard It From Rain As It Will Be Kept In Open Balcony. Individual Cylinder Capacity Is 47 To 50 Liters. , Exhaust Duct (From Gas Cabinet): 4” Exhaust Duct, 2Mm Thickness With Fittings And Accessories. , Exhaust Duct (For Mpcvd Vacuum Pump Outlet): 1.5” Exhaust Duct, 2Mm Thickness With Fittings And Accessories. , Dry/Wet Scrubber: *Available Space For Scrubber Installation Is 1 M X 1 M (Lx B) Will Be Kept In The Balcony As Shown In The Figure 1. , Blowers For Exhaust: * Designed For Flowrate As Per The Requirement Of Gas Cabinet/Panel And Cvd Vacuum Pump Outlet Exhaust. , Instrumentation Cables And Necessary Cable Trays: Cat6 Cable With Necessary Cable Lugs And Cable Tray. , 3” Pipe For Chilled Water: 3” Sch 10 Stainless Steel 304 Pipe With Insulation (Nitrile Rubber And Aluminium Cladding) With Necessary Gate Valves, Fittings And Supports , 1” Pipe For Chilled Water: 1” Sch 10 Stainless Steel 304 Pipe With Insulation (Nitrile Rubber And Aluminium Cladding) With Necessary Gate Valves, Fittings & Supports , Chilled Water Distribution System Installation Followed By Pressure Hold Test. Pressure Hold Test For Chilled Water Lines At The Site. Certified Up To 1.5 Times Of The Working Pressure By Keeping The System Under Pressure Using Ro Water/Nitrogen Gas For 24 Hours Without A Drop In Pressure.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
35.
Health and Family Welfare #10704912 Price Bid
Tender For Reagents And Consumables Supply Of Lab Reagents And Consumables , Semi-Automactic Bio-Chemistry Analyzer , Albumin(5X50ml) , Alkline Phosphtase 4X24 + 4X6ml) , Bilirubin Kit (4X60ml) , Cholestrol Kit (5X30ml) , Creatinine Kit(4X60m)L , Ggt (5X6.5Ml) , Glucose Kit (5X60ml) , Hdl Kit (4X30ml + 4X10ml) , High Control For Semi Auto (1X5ml) , Normal Control For Semi Auto (1X5ml) , Sgot Kit (4X24ml + 4X6ml) , Sgpt Kit (4X24ml + 4X6ml) , Total Protein (5X50ml) , Triglycerides Kit (4X24ml + 4X6ml) , Urea Kit (4X24ml + 4X6ml) , Uric Acid Kit (4X24ml + 4X6ml) , Wash Kit (4X50ml) , General Lab Chemicals And Consumables , Absolute Alcohol 70% (500 Ml) , Almunium Slide Tray , Anti Ab , Anti D ( Igg+ Igm) , Anti Human Sera/ Coombs Sera , Anti Sera Abo Rh/ Blood Group Test Kit (10Ml Each, Total 30Ml) , Anti-D Igg 10 Ml , Anti-D Igm 10 Ml , Aso 50 Test Titer Rapid Method , Band Aid , Beaker 1000Ml , Beaker 100Ml , Beaker 250Ml , Beaker 500Ml , Blood Grouping Plate , Blotting Sheet , Blue Tips , Bovine Albumin , Capillary Tubes , Card For Haemo Spot , Centrifuge Tube Stand 15 Ml(10*2) , Centrifuge Tube Stand 50 Ml(15*2) , Conical Flask 500 Ml , Coplin Jars , Copper Sulphate Powder 500Gm , Covid Elisa Anigen Kit (Icmr Approved) , Crp 50 Test Kit (Qualitative) , Cryo Box With Lid , Cryo Vials 2 Ml , Culture Swab Stick , Diamond Marking Pencils , Disposable Alcohol Swab , Disposable Esr Pipette , Disposable Esr Tube (Westergen Method) , Distilleddionized Water 5 Ltr , Distilled Double Dionized Water 5 Ltr , Distilled Triple Dionized Water 5 Ltr , Double Blood Bag 300 Ml , Dpx Mount , Durham Tube , Edta Vial (Non Vacuum) , Edta Vial (Vacuum) , Eppen Drop Vial ( Mct ) , Esr Black Vial (Non Vacuum) , Esr Black Vial (Vacuum) , Esr Stand , Ethanol Absolute , Falcon Tube , Filter Paper , Filter Tip 10 Micro Litre (1*960) , Filter Tip 100 Micro Litre (1*960) , Filter Tip 20 Micro Litre (1*960) , Filter Tip 200 Micro Litre (1*960) , Filter Tip 5 Micro Litre (1*960) , Floride Vial (Non Vacuum) , Floride Vial (Vacuum) , Fouchet Reagent , Giemsa Stain 125 Ml , Glacial Acetic Acid , Glass Bottel Round 1000Ml , Glass Bottel Round 500Ml , Glass Cover Slip 22 Mm , Glass Pipett10ml , Glass Pipett2ml , Glass Pipett5ml , Glass Slide , H & E Stain (Haematoxillin Stain) , H.I.V Elisa4th Generation (96 Test) , Hand Sanitizer 5 Ltr (Ip Base) , Hbsag Card , Hbsag Elisa 4Th Generation (96 Test) , Hcv Elisa 4Th Generation (96 Test) , Hcv Rapid Card , Hiv Rapid Card , Hydro Chloric Acid 500 Ml , Ice Gelpack , J.S.B 1 Stain , J.S.B 2 Stain , Kalazar Test Rapid Card , Lancet (Auto Destroyable/Safety Lancet) , Lancet (Twisted Round) , Leucoreduction Filter , Lieshmen Powder 25 Gm , Lugal Iodine 125 Ml , Malaria Antigen Card , Manual Rna Extraction Kit 50 Test (Icmr Approved) , Mathenol 2.5 Ltrs , Mct Vials 1.5Ml , Mct Vials 2.0Ml , Measuring Cylinder 1000Ml , Measuring Cylinder 100Ml , Measuring Cylinder 20Ml , Measuring Cylinder 500Ml , Microscope Cover Glass 22 X 40 Mm , Micropipette Single Channel Fixed Volume Fully Autoclavable (All Size Variants) , Micropipette Single Channel Variable Volume Fully Autoclavable (All Size Variants) , Micropipette 8 Channel Variable Volume Fully Autoclavable (All Size Variants) , Micropipette 12 Channel Variable Volume Fully Autoclavable (All Size Variants) , Multistix , N/10 Hcl 500Ml , Naoh Sodium Hydroxide , Og 6 , Oil Immersion 25Ml , O-Toluidine (500Ml) , Parafilm Tape , Pastuer Pipette , Ph Paper 5.0 To 7.5 , Plain Vial (Non Vacuum) , Plain Vial (Vacuum) , Potassium Permagnate , Ppe Kit (Citra& Drda Approved) , Pregnancy Cards/ Upt Cards , Qiaamp Dna Blood Mini Kit (250 Test) , Qiaamp Viral Rna Blood Mini Kit (250 Test) , Quadraple Blood Bags 450Ml , Ra Factor 50 Test Kits , Rapid Antigen Detection Card Test For Bacterial Meningitis , Rapid Pap Stain Kit , Rapid Test Card For Cephalosporin , Rapid Test Kit Igg, Igm, Ns1 For Dengue , Reversible Rack Mct , Rt-Pcr Flu Kit(192 Test) , Rt-Pcr Hbv Quantative Kit (192 Test) , Rt-Pcr Hcv Quantative Kit (192 Test) , Rtpcr Kits 96 Test For Covid-19(Icmr Approved) , Rubber Teat For Pipette , Salt Iodine Testing Kit , Sample Cup With Label (3 Screw, Sterile) , Single Blood Bag 350Ml , Siprit5 Leter , Slide Storage Rack , Slide Storage Tray Pvc , Sodium Chloride , Sodium Citrate Vials Non Vaccum , Sodium Citrate Vials Vaccum , Sodium Dehydrogen Orthophosphate , Sodium Hydrogen Orthophosphate , Sodium Hypochloride 10 %5 Ltr , Sodium Hypochloride 10% , Sst Vialsvaccum , Sst Vials Non Vaccum , Steel Rack For Test Tube 48 Hole , Sterile Swab Stick , Sterlum 500Ml , Stickers For Slide , Strip Test For Water Feacal Contamination , Sulphar Powder 500 Gm , T3 Elisa (96 Test) , T4 Elisa (96 Test) , Test Tube 30 Slots , Test Tube Glass12*100 , Test Tube Glass12*75 , Test Tube Glass15*150 , Test Tube Glass25*150 , Test Tube Stand 10 Slots , Thermal Paper Roll , Thermocol Box , Tissue Paper Roll 20 Meter , Tourniquate , Tsh Elisa (96 Test) , Uristix 100 Strips , Vaccutainer , Vaccutainerneedle , Vdrl Card , Vtm Swab Stick , Washing Brush . , Water Chlorination Test Kit , Water Contaminationtest Kit , Water Sample Collection Glass Bottle 1000Ml , Water Sample Collection Glass Bottle 500Ml , Widal Kit (Slide Method) , Wipes 1*280 Pc Lab Grade , Xylene , Yellow Tips 1/1000 Nos , Zip Lock Pouch For 1 Ltr , Absolute Alcohol 95% (500 Ml) , Acetone(500Ml) , Amikacin (100 Disk) , Amoxicillin (250 Disk) , Amoxy Clav (100 Disk) , Ampicillin (100 Disk) , Azithromycin (250 Disk) , Aztreonam (100 Disk) , Biological Indicator , Bunsen Burner , C.L.E.D Agar 500Gm , Carbol Fuchsin (125 Ml) , Carbolic Acid 500Ml , Cefapirome , Cefazolin (100 Disk) , Cefepime (100 Disk) , Cefixime (100 Disk) , Cefotaxime (100 Disk) , Cefoxitin (100 Disk) , Ceftazidime (100 Disk) , Ceftriaxone (100 Disk) , Cefuroxime (100 Disk) , Chemical Indicator , Ciprofloxacin (100 Disk) , Clindamycin (100 Disk) , Concave Slide , Conical Flask 500Ml , Cotrimoxazole , Crystal Violet (125 Ml) , Cyto Brush With Spatula (100 Piece) , Doxycycline (100 Disk) , Erythromycin (100 Disk) , Gatifloxacin (100 Disk) , Gentamicin (100 Disk) , Glucose Broath , Gram Iodine Solution (125 Ml) , Haematoxylene Stain , Imipenem (100 Disk) , Indicator Tape For Steam Autoclave Process Verification , Kovacsindole Reagent (100 Ml) , Lactose Monohydrate (500 Gm) , Leucoreduction Filter , Levofloxacin (100 Disk) , Linezolid (100 Disk) , Liquid Broath , Mac Conkey Agar 500Gm , Mac Conkey Broth Double Strength 500Gm , Meropenem (100 Disk) , Methylene Blue 25 Gram , Motility Test Medium , Mr Vp Medium 500Gm , Muller Hinton Agar 500Gm , Nalidixic (100 Disk) , Netlimicin (100 Disk) , Nitrofurantion (100 Disk) , Norfloxacin (100 Disk) , Nutrient Agar 500Gm , Ofloxacin (100 Disk) , Og 96 (125 Ml) , Oxidase Disc (50 Disk) , Papanicalaoum Solution –Orange Ii , Paraffin Wax (2 Kg) , Penicillin (100 Disk) , Pepanicolous Solution 2B , Peptone Water 500Gm , Petri Dish (500 Piece) , Ph Strips , Phenoloc Compound 40% (5 Leter) , Piperacillin/ Tazobactam (100 Disk) , Polypropolene Swab Tube , Safranine Solution (125 Ml) , Simmons’Scitrate Agar 100Gm , Sodium Chloride , Sparofloxacin , Sulbactum Cefaperazole , Sulphuric Acid (500 Ml) , Syabien Cascin Diagest Medium 100Gm , Tcbs Agar (500 Gm) , Teicoplanin (100 Disk) , Ticarcillin (100 Disk) , Tobramycin (100 Disk) , Triple Sugar Iron Agar (500 Gm) , Tryptone Soya Broth Culture Bottles 10*20Ml , Tryptone Soya Broth Culture Bottles 10*70Ml , Urea Base Agar 100Gm , Urea Solution 40% Sterile (5 Vial) , Urine Culture 50Ml Sterilize(100 Piece) , Vancomycin (10 St) , Xld Agar 500 Gm) , Xylose Lysine (100 Gm) , Young Broath Culture
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
36.
Power #10656217 Price Bid
Augmentation / Renovation And Modernization Of 33 / 11 Kv Receiving Station Sunjwan From 2X1.5 Mva To 2X3.15 Mva Along With, Erection Of New 33 Kv Line ( 2Nd Source ) From 33 / 11 Kv, 3X10 Mva, Receiving Station Channi Himmat To Receiving Station Sunjwan, Stabilization / Strengthening Of Existing 33 Kv Line ( 1St Source ) And Other Allied Works Relating To Receving Station Mes Sunjwan, Jammu On Turnkey Basis- 1 Substation Main Equipment 2 33 Kv Transformer Bay & Single Bus 33 Kv Line Bay 3 33 Kv Vcb ( 36 Kv, 1250A, 26.2 Ka, Outdoor Type ) 4 33 Kv Isolator Without Earthing Blade ( 36Kv, 1250A, Outdoor, 3 Poles, 25 Ka ) 5 33 Kv Current Transformer ( 33 Kv, 1F, Multi Ratio Multi Core, Outdoor ) ( 1 No. Per F ) 6 33 Kv Voltage Transformer ( 33 Kv / 110 V, 1F, Multi-Core, Outdoor ) , ( 1No. Per F ) 7 33 Kv Lightening Arrestors ( 30 Kv, 10Ka, Station Class, Zno, Polymer ) Gap Less 8 33 Kv Polymer Post Insulator36kv, 170Kv Impulse, Creepage Distance 1224M 9 33Kv C&R Panel Along Witho / C, E / F Relays, Diffrential Relay, Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps With Rs-485 Port, Dlms Compliant With Rs-485 Port ( For Power Transformers ) 10 33Kv C&R Panel Along Witho / C, E / F Relays, Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps With Rs-485 Port, Dlms Compliant With Rs-485 Port 11 Steel Structures 12 Galvanised Steel Structures 13 Galvanised Nuts & Bolts 14 Conductor And Hardware 15 200 Mm² Acsr Panther Conductor 16 T Clamps 17 Tension Fitting Suitable For 200 Mm Sq Conductor. 18 33 Kv Polymer Composite Disc Insulators 36 Kv, Min Falling Load 70 Kn, Lightening Impulse 170 Kv Positive And 180 Kv Negative, Creepage Distance 900 Mm. 19 Earth Wire 7 / 3.15 Mm Sq. 20 Gi Flat For Earthing 50X6mm & 25X3 Mm 21 3.15 Mva , 33 / 11 Kv Power Transformer 22 33 / 11Kv, 3.15 Mva Onan, Copper Wound, Out-Door Type, Conventional Power Transformer, Oil Filled With Oltc And All Accessories Including Ht And Lt Terminal Connections 23 Power Control Cables And Accessories 24 12 Core, 2.5 Mm Sq. 25 6 Core, 2.5 Mm Sq. 26 4 Core, 2.5 Mm Sq. 27 2 Core, 2.5 Mm Sq. 28 Lugs, Ferrules Etc. 29 Laying Of 33 Kv Line ( Approximately 1.9 Km ) 30 13 Mtr. Long St Poles ( St-410Sp69 ) 31 G.I Channel ( 100X50x6 ) Mm Sq, G.I Angle ( 65X65x6 ) Mm, G.I Angle ( 50X50x6 ) Mm Sq. Sq., G.I Flat ( 50X6 ) Mm Sq. 32 200 Mm2acsr Panther Conductor 33 P.G. Clamp For 200 Mm2 Acsr Panther Conductor 34 33 Kv Pin Insulators Polymer Type ( 10Kn ) 35 33 Kv Polymer Composite Disc Insulators 36 Kv, Min Falling Load 70 Kn, Lightening Impulse 170 Kv Positive And 180 Kv Negative, Creepage Distance 900 Mm. 36 Tension Fitting Suitable For 200 Mm Sq Conductor. 37 Galvanised Nuts And Bolts With Washers 38 33 Kv Danger Plates With Clamps 39 Anti-Climbing Device With Clamps 40 Earthing Complete ( Gi Pipe 40 Mm Or Gi Rod 20 Mm, 2.5 Mtr Long With Gi Strip ) 41 33 Kv Isolatorwithout Earthing Blade 42 Red Oxide Paint 43 Aluminum Paint. 44 Cement Bottoming ( 1:2:4 Mix As Per Rec Standards, 6 Cum / Pole ) 45 Aluminium Jointing Sleeevs 46 Insertion Of 11 Mtr St Poles In Existing 33Kv Line 47 11 Mtr. Long St Poles ( St-410Sp56 ) 48 G.I Channel ( 100X50x6 ) Mm Sq, G.I Angle ( 65X65x6 ) Mm, G.I Angle ( 50X50x6 ) Mm Sq. Sq., G.I Flat ( 50X6 ) Mm Sq. 49 200 Mm2acsr Panther Conductor 50 P.G. Clamp For 200 Mm2 Acsr Panther Conductor 51 33 Kv Pin Insulators Polymer Type ( 10Kn ) 52 33 Kv Polymer Composite Disc Insulators 36 Kv, Min Falling Load 70 Kn, Lightening Impulse 170 Kv Positive And 180 Kv Negative, Creepage Distance 900 Mm. 53 Tension Fitting Suitable For 200 Mm Sq Conductor. 54 Galvanised Nuts And Bolts With Washers 55 33 Kv Danger Plates With Clamps 56 Anti-Climbing Device With Clamps 57 Earthing Complete ( Gi Pipe 40 Mm Or Gi Rod 20 Mm, 2.5 Mtr Long With Gi Strip ) 58 Red Oxide Paint 59 Aluminum Paint. 60 Cement Bottoming ( 1:2:4 Mix As Per Rec Standards, 6 Cum / Pole ) 61 Aluminium Jointing Sleeevs 62 Guard Netting Of 33 Kv Lines 63 Guys For 33 Kv Lines 64 Galvanised Stay Set With 50X8 Mm Stay Clamp, Guy Insulators ( 2 Nos ) , Anchor Plate ( 300X300x8mm ) , Nut Bolts, 2 Nos Turn Buckles, 1.8 M Long, 20 Mm Diameter Solid Gs Stay Rod & 7 / 4.00 Mm Dia Gi Standard Wire Complete. 65 Common Miscellaneous Works 66 Development Of Land 67 Chain Link Fencing Of 33Kv Yard Of Substation By Way Of Mass Concreting In Foundations And Chain Link Fencing Of 6Ft. Height 68 33 / 11Kv Transformer Foundation 69 33Kv Equipment Foundation ( Breakers, Cts / Pts, Isolators, Las ) 70 Earthing Mat ( Gi Flat 50Mm X 8Mm ) 71 33Kv Yard Concreting / Metalling And Laying Of Gravels 20Mm ( Complete Bays ) 72 Yard Lightening ( Complete ) With 4 No. 9 Mtr Long St Poles ( St-410 ) , Sp-33, Fitted With 2 No. 60 W Led Lights On Each Pole, Complete With Control Gear Box, Earthing And Bottoming Of Poles. 73 Rcc Cable Trench ( 1:2:4 ) For Laying Of 11 Kv Xlpe Power Cables And Control Cables From Various Equipments To Control Room & From Control Room To Outgoing Structures Alongwith Rcc Duct Covers. 74 Earthing Electrode ( 3M Long 40Mm Dia Gi Pipe ) Through Gi Strip 75 Common Miscellaneous Equipments 33 / 11Kv Substations 76 A ) . Battery Bank 30 V, 100 Ah , Of 15 No. Cells Of 2 V Each, Sealed Maintenance Free Vrla Type, High Impact Polyprophelenecopolymer Container, Flame Retardant. B ) . 30V, 100 Ah , Float-Cum-Boost Charger With Full Wave Rectification For 220 V, 1Phase, 50 Hz Ac Input Supply . 77 Distribution Panel ( 30 V, Dc ) Made Of Crca Thickness Not Less Than 2Mm. Powder Coated, Degree Of Protection Ip43 For 2 No Battery Incoming Supply With 2 No 63 Amps Dp Mcbs For Incoming Supply Doublebusbar Of Adequate Size, 12 No Dp Dc Mcb ( 0-32A ) Including Indication Lamps And Cables And Other Accessories 78 Distribution Panel ( 415 V, Ac ) Made Of Crca Thickness Not Less Than 2Mm. Powder Coated, Degree Of Protection Ip43. 200 Amps Switch Fuse Disconnector For Incoming Supply And 5 No Tpn McbS ( 16-125 Amps ) And 5 No Dp Mcbs ( 0-32A ) , Rectangular Busbar Suitable For 200 Amps Continuous Supply Including Indication Lamps And Cables And Other Accessories 79 Rubber Mat 1Mx2m 3 Mm Thick For 33 Kv 80 Fire Extingiusherco2type Of 4.5 Kg Capacity For Control Room 81 3Sand Bucket Fire Extingiusher 82 Helmet 83 Rubber Gloves For 33 Kv Level 84 Rubber Gloves For 11Kv Level 85 Safety Belt 86 Safety Shoes 87 Hv Detectors For 33 Kv 88 Earthing Rod ( Set Of 3 Rods ) 89 Rmu Along With Out Going Cable 90 33 Kv Ring Main Unit : 3 Way Out Poor Type Rmu, Sf6 Insulated, Extensible Type, At 33 Kv System Voltage And Breaking Capacity 25 Ka For One Second, With Sf6 Circuit Breaker / Vcb Self Powered With O / C+ E / F Relay System Comprsing Of A ) One Nos 33 Kv, 630 Amp. Motorized Isolators Including Earthing Switches With Making Capacity 62.5 Ka, Having Mechnical On / Offb ) Two Nos 33 Kv, 200 Amp Motorized, Spring Operated, Circuit Breakers With Earthing Switchesc ) Cu Bus-Bar Of 630 Amp. Ratingd ) One No Numerical Aux. Self Powered Relay Having Non Directional O / C And E / F Protection ( For Each Circuit Breaker Feeder ) , Relay Should Have Minimum 7-Di & 8-Do. The Relay Shall Also Interface Via An Rs 232 / 485 Port In Orde O Send, As A Minimum, Real Time Readings Using The Modbus Protocol.E ) Incoming Isolators Shall Have Fpi With Electrical Reset Contact / Facility.F ) All Necessary Potential-Free Contacts For Indications Relevent To Rmu Monitoring And Control.G ) Capacitor Voltage Dividers Serving Live-Line Cable Indicators In Each Breaker & Isolator. 91 33 Kv 3 Phase Indoor Terminating Kit To Be Used With Cables-185Mm Sq. 92 33 Kv 3 Phase Out Door Terminating Kit To Be Used With Cables-185Mm Sq. 93 Cable Route Markers 94 Excavation In Any Type Of Soil Including Hard Laterit Soil 95 Refilling Of Excavated Soil 96 Sand For Cushioning Of The Cables In The Trench 97 Cement Tiles Of Size 300 Mm Lengthx 250 Mm Widthx 37 Mm Thick As A Protective Cover For Underground Cables 98 Earthing Of Rmu- Excavation Of Earth Pit Of Dia 650 Mm & Depth 3000 Mm, Installation Of Earthing Pipe Of 40 Mm Nominal Bore & 4 Mm Wall Thickness & Length 2.5 Mtr Long As Per Is 1239. Gi Strip For Neutral Earthing Of Size 75 Mmx10mm & 50 Mm X 6 Mm For Connection Of Rmu Body As Per Is 2629 / 85, Gi Nuts And Bolts, Refilled With Earth Enhancement Materials And Earth Chamber Made Of Brick Masonary With Rcc Slab Cover. 99 Cement Concrete 1:2:4 ( 1 Cement, 2 Coarse Sand, 4 Graded Graniticor Basaltic Stoe Aggregated 40 M Nominal Size Of Foundation ) 100 Centering And Shuttering Including Struttings, Propping Etc. & Removal Of Form Work 101 15 Mm Cement Plaster 1:4 For Foundations. 102 Wire Mesh Boundary Fencing Around The Rmu 103 33 Kv, 3 Core Xlpe Cable Armoured, 185 Mm2 104 Installation Of Capacitor Bank 105 12 Kv, 1.2 Mvar, Capacitor Bank With Vcb Panel With Complete Arrangement For Conection With 11 Kv Incomer Panel , Series Reactor, Isolator, Rvt, Surge Arrestors, Ht Cable With Termination Kits, Control Cables, Crca Cubicle Panel Etc With Structure, Foundation & Accessories. 106 33 Kv Ct / Pt 107 33Kv Ct / Pt Combined Unit, With Ct Ratio 100 / 5 & Ptr 33 Kv / 110 V / V3 , 3-Phase, 50 Hz, Onan Cooled, Outdoor Type. The Combined Unit, Cts And Pts Shall Be As Per Below Specifications.The Rated Burden Of Ct Shall Be 7 Vathe Rated Burden Of Pt Shall Be 20Va Per Phase With Proper Colour Coded Identification. Pts Shall Be Of Uniform Insulating And One Minute Power Frequency Dry Withstand Voltage 70Kv 108 Metering Cubicle For 3Phase 4 Wire Metering System Suitable For 3 Phase, Ht, Tri-Vector Meter With Sealing And Locking Facility Made Of Ms Sheet Steel Thickness Not Less Than 2Mm Duly Power Coat Painted Suitable For Indoor As Well As Outdoor As Per The Site Requirement. The Cubicle Shall Be Painted Through 7-Tank Process. The External Dimensions Should Be Adequate. Provided With Synthetic Or Semi Synthetic Gasket Firmly Glued To The Surface, Dust, Weather Andvermin Proof And Shall Comply Degree Of Protection Ip 65 Both The Chambers Having One Sided Hinged Door Arrangements. The Panel Shall Be Provided With Two No Ms Channels Of Size 100 X 50 Mm On The Front And Rear Sides Duly Welded And 4 No Of Lifting Hooks. It Should Be Possible To Take Meter Reading Manually, Through Cmri And Computer Without Opening Door. Including Supply And Fixing Of 75Mm Gi Pipe Between Ct / Pt Combined Unit And Metering Cubicle For Ct / Pt Wiring To Tri-Vector Meter. 109 Gichannel & Angle For Mounting Ct Pt Combined Units With Nuts And Bolts ( Size 100 X 50 X 5 Mm ) 110 3Ph4 Wire Ht Ct / Pt Operated Fully Static Smart Tri-Vector Energy Meters Dlms Compliant Category C With Rs232 Port . 33Kv / V3 / 110V / V3, Ph-N ( 3P, 4W ) Meters For Measurement Of Different Electrical Parameters Including Active Energy ( Kwh / Mwh ) , Reactive Energy ( Kvarh / Mvarh ) , Apparent Energy ( Kvah / Mvah ) Etc. ( Make L&T, Secure Or Abb ) . 111 Pvc Copper Wire Flexible Multi-Strand Of Required Size For Secondary Connections For Ct Wiring The Minimum Wire Size Shall Be 4 Mm2 ( Ryb ) And For Pt Wiring Minimum Wire Size Shall Be 2.5 Mm2 ( Ryb ) . 112 Copper Lugs Preferably Ring Type Duly Crimped For Termination Of Wires And Tapes 113 Acsr Jumpers With Hardware Fittings Like Acsr To Ct / Pt Unit Bush Clamp, Other Hardwares As Per Site Requirement 114 Earthing 40 Mm Gi Pipe Or 20 Mm Gi Rod, 2.5 Mtr For Ct / Pt Combination Unit. Earthing Of Metering Cubicle Through Two No 25 X 5 Mm Flat Iron. 115 11 Kv Indoor Switchgear 116 11 Kv Vcb Panel Board ( 12 Kv, 1250A, 25 Ka, Outdoor ) With O / C, E / F Relays ( Iec61850 ) , Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps, Dlms Compliant With Rs-485 Port ( 1 Incomer & 3 Outgoing ) 117 11 Kv Bus Coupler Along With Adaptor Panel 118 11Kv, Gapless Surge Arrestor, 9 Kv , 10 Ka , La With Polymer Housing, Stn. Type ( 4 / 5 / 6 Sets ) 119 100 Kva, 11 / 0.433Kv, 3-Phase Distribution Transformers With Bimetallic Terminal Connectors Energy Level-2, ( Aluminium Wound ) 120 11 Kv Isolater, Double Break, 3-Pole, 600 Amp, Horizental Mounting Type With Earth Switch 121 11Kv Horn Gap, 3-Phase, 3-Pole, 200 Amp 122 Pvc Armoured Cable ( Lt ) , 120Mm2 ( 3.5 Core ) 123 St Poles ( St-410 ) , Sp-33, 9 Mtrs.Long ( For 4 No. O / G Structures And 2 No. Aux Sub Station ) 124 Cement Bottoming 1:2:4 Mix As Per Rec Standards 0.5Cum Per Pole 125 Earthing Complete By Gi Pipe 40 Mm Or Gi Rod 20Mm 2.5 Mtr Long Through Gi Strip 126 Mccb-200 Amp With Enclosure 127 Galvanisedironoff Sorts 128 Earthing Of 100Kva Substation --Excavation Ofearth Pit Of Dia650 Mm & Depth 3000 Mm, Installation Ofearthing Pipe Of 40 Mm Nominal Bore & 4Mm Wall Thickness & Length 2.5 Mtr Long As Per Is 1239.Gi Strip For Neutral Earthing Of Size 75 Mm X10 Mm& 50 Mm X 6 Mmfor Connection Of Transformer Body, G.O Set & Lightening Arrestor As Per Is 2629 / 85, Gi Nuts & Bolts, Refilled With Earth Enhancement Materials And Earth Chamber Made Of Brick Masonary With Rcc Slab Cover. 129 11 Kv Xple Power Cables 130 11 Kv, 630 Mm² Single Core Xlpe Armoured, Frls. ( With One Spare Length ) 131 11 Kv, 3- Core, Xlpe 185 Mm² Armoured, Frls, 132 11 Kv Indoor Heat Shrinkabler Cable Termination Kits For 630 Mm Sq. Single Core Cable. Id / Od 133 11 Kv Outdoor Heat Shrinkabler Cable Termination Kits For 185 Mm Sq. Three Core Cable. Id / Od
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
Jammu And Kashmir View Result →
37.
Rural Development #10579130 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Gram Panchayat Shari Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
38.
Rural Development #10579078 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work N The Grampanchayat Jawala Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
39.
Educational and Research Institute #10575938 Price Bid
Tender For Supply Of Ctvs Implants / Instruments - Cardiothorecic Implants And Instruments , Ctvs Implants / Instruments , Silk1 No 75Cm , Silk1-0 R.C 75Cm , Silk3-0 R.B. 75Cm , Silk4-0 R.C. 75Cm , Silk4-0 R.B. 75Cm , Umblical Tape 75Cm , Pacing Wire 2-0 18 Mm 75Cm , Pacing Wire 2-0 26 Mm 75Cm , Surgical Steel 4 No Cutting 48Mm , Surgical Steel 4 No Blunt Point R.B. 45Mm , Surgical Steel 5 No Cutting48 Mm , Surgical Steel 5 No Blunt Point R.B. 45 Mm , Surgical Steel 6 No Cutting 48 Mm , Surgical Steel 6 No Blunt Point 45 Mm , Polyester 2-0 10X75cm 17.5 Mm , Polyester 2-0 10X75cm 17.5 Mm3x3x1.0 Pledget , Polyedter 2-0 10X75cm 26Mm , Polyedter 2-0 10X75cm 26Mm6x3x1.0 Pledget , Polyedter 2-0 10X75cm 26Mm3x3x1.5 Pledget , Polyedter 2-0 10X75cm 26Mm3x3x1.0 Pledget , Polyproplyne2-017.5 Mm D.A. 90 Cm , Polyproplyne2-017.5 Mm D.A. 150 Cm , Polyproplyne2-026 Mmd.A.90 Cm , Polyproplyne2-026 Mmd.A.150 Cm , Polyproplyne3-0 17.5 Mm D.A. 90 Cm , Polyproplyne3-0 25Mm D.A. 90 Cm , Polyproplyne3-0 26 Mm D.A.90 Cm , Polyproplyne4-0 13 Mm D.A.60 Cm , Polyproplyne4-0 16 Mm D.A.90 Cm , Polyproplyne4-017.5 Mmd.A. 90 Cm , Polyproplyne4-017.5 Mmd.A. 90 Cm Pledget 3X3x1.5 , Polyproplyne4-020 Mm D.A.90 Cm , Polyproplyne4-026 Mm D.A.90 Cm , Polyproplyne4-026 Mm D.A.90 Cm Pledget 3X3x.50 , Polyproplyne5-010 Mm D.A. 60 Cm , Polyproplyne5-010 Mm D.A. 75 Cm , Polyproplyne5-010 Mm D.A. 60 Cm Pledget 3X3x1.5 , Polyproplyne5-010 Mm D.A. 75 Cm Pledget 3X3x1.5 , Polyproplyne5-010 Mm D.A. 75 Cm Pledget 3X3x0.5 , Polyproplyne5-013 Mm D.A. 60 Cm Pledget 3X3x1.5 , Polyproplyne5-013 Mm D.A. 60 Cm Pledget 3X3x0.5 , Polyproplyne5-013 Mm D.A. 75 Cm Pledget 3X3x0.5 , Polyproplyne5-013 Mm D.A. 45 Cm , Polyproplyne5-013 Mm D.A. 75 Cm , Polyproplyne5-016 Mm D.A. 90 Cm , Polyproplyne5-016 Mm D.A. 90 Cmpledget 3X3x1.5 , Polyproplyne5-020 Mm D.A. 90 Cm , Polyproplyne6-010 Mm D.A. 60 Cm , Polyproplyne6-010 Mm D.A. 75 Cm , Polyproplyne6-010 Mm D.A. 60 Cm 3X3x1.5 , Polyproplyne6-010 Mm D.A. 60 Cm 3X3x0.5 , Polyproplyne6-013 Mm D.A. 60 Cm , Polyproplyne6-013 Mm D.A. 60 Cm Black Needle , Polyproplyne6-013 Mm D.A. 45 Cm , Polyproplyne6-013 Mm D.A. 75 Cm , Polyproplyne6-013 Mm D.A. 90 Cm , Polyproplyne6-011 Mm D.A. 60 Cm , Polyproplyne6-09 Mm D.A. 60 Cm , Polyproplyne6-09 Mm D.A. 75Cm , Polyproplyne7-09Mm D.A. 60Cm , Polyproplyne7-09Mm D.A. 75Cm , Polyproplyne7-09Mm D.A. 60Cm Black , Polyproplyne7-09Mm D.A. 60Cmp V Needle , Polyproplyne7-09Mm D.A. 60Cmc Cneedle , Polyproplyne7-010Mm D.A. 60Cm , Polyproplyne7-08Mm D.A. 60Cm Cc Needdle , Polyproplyne7-08Mm D.A. 60Cm P V Needle , Polyproplyne7-08Mm D.A. 60Cm Black , Polyproplyne8-06 Mm D.A.60 Cm , Polyproplyne8-06.5 Mm D.A.60 Cm , Polyproplyne8-09 Mm D.A.60 Cm , Polyproplyne8-010 Mm D.A.60 Cm , Polyglactin1 No R.B. 40 Mm A.M. 90 Cm , Polyglactin1 No R.B. 40 Mm A.M. 70 Cm , Polyglactin1 No R.B. 36 Mm A.M. 120 Cm , Polyglactin1 No R.B. 36 Mm A.M. 90 Cm , Polyglactin 1 No.R.C. 40Mma.M. 90 Cm , Polyglactin 1 No.Taper Cut 40Mma.M. 90 Cm , Polyglactin 1-0 No. R.B. 40Mma.M. 90 Cm , Polyglactin 1-0 No.Taper Cut 36Mma.M. 90 Cm , Polyglactin 1-0 No.R.C. 36Mma.M. 90 Cm , Polyglactin1-0 No R.B. 30 Mm A.M. 90 Cm , Polyglactin1-0 No R.B. 36 Mm A.M. 90 Cm , Polyglactin 2-0 R.B. 30 Mm A.M. 90 Cm , Polyglactin 2-0 R.B. 30 Mm A.M. 70 Cm , Polyglactin 2-0 R.B. 40 Mm A.M. 90 Cm , Polyglactin 2-0 R.C. 40 Mm A.M. 90 Cm , Polyglactin 2-0 R.B. 36 Mm A.M. 90 Cm , Polyglactin 3-0 R.C. 24 Mm A.M. 70 Cm , Polyglactin 3-0 R.B. 20 Mm A.M. 90 Cm , Polyglactin 4-0 R.B. 20 Mm A.M. 70 Cm , Polyglactin 5-0 R.B. 16 Mm A.M. 45 Cm , Pds 1 No Loop , Absorbable Tacker , Non Absorbable Tacker , Barb Sutures Polydiaxone 1-0 Rb , Barb Sutures Poluglecaprone / Polyglactin 2-0 , Barb Sutures Polydiaxone 2-0 , Barb ( Polydiaxonone Violet ) 30 Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 15 Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 30Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 2-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 2-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 25 Cm 2-0 1 / 2C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 3-0 3 / 8C. R.C. , Barb ( Polydiaxonone Violet ) 15 Cm 3-0 1 / 2 C.R.B. , Barb ( Pga-Pcl Und ) 36 Cm2-0 , Barb ( Polydiaxonone Violet ) 30 Cm 1-0 , Barb ( Pga-Pcl Und ) 30 Cm 3-0 , Barb ( Pga-Pcl Und ) 30 Cm 4-0 , Non-Oxidised Non-Regenrated Cellulose 10X10 Cm , Non-Oxidised Non-Regenrated Cellulose5x10 Cm , Non-Oxidised Non-Regenrated Cellulose 8X20 Cm , Membrane Oxygenator Efficient Heat Exchanger With Surface Coating. Small Adult 5 Ltr , Membrane Oxygenator Efficient Heat Exchanger With Surface Coating. Ped. 4 Ltr , Membrane Oxygenator Efficient Heat Exchanger With Surface Coating With Hardshell Venous Reservoir, Cardiotomy Filter And Integrated Arterial Filter. Neonatal 1.5 Ltr , Custom Tubing Pack , Silver Knitted Acetate Collagen-Coated Polyester Graft. Knitted, Woven.Antimicrobial.Reduce The Risk Of Graft-Related Infection Silver Acetate Does Not Promote Bacterial Resistance Validated Intended Use With Rifampicin Loading.Bovine Collagen.Water Permeability = 5Ml • Cm-2 • Min-1@120 Mmhgsizes40 Cm6, 7, 8, 10, , Silver Knitted Acetate Collagen-Coated Polyester Graft. Knitted, Woven.Antimicrobial.Reduce The Risk Of Graft-Related Infection Silver Acetate Does Not Promote Bacterial Resistance Validated Intended Use With Rifampicin Loading.Bovine Collagen.Water Permeability = 5Ml • Cm-2 • Min-1@120 Mmhgsizes70 Cm6, 7, 8, 10, , Silver Knitted Bifurgatedacetate Collagen-Coated Polyester Graft. Knitted, Woven.Antimicrobial.Reduce The Risk Of Graft-Related Infection Silver Acetate Does Not Promote Bacterial Resistance Validated Intended Use With Rifampicin Loading.Bovine Collagen.Water Permeability = 5Ml • Cm-2 • Min-1@120 Mmhgsizes50 Cm 12X6, 14X7, 16X8, 18X9 , Ptfe Ring Graft40 Cm Length 5, 6, 7, 8, , Ptfe Ring Graft75 Cm Length 5, 6, 7, 8, , Hmeand Bacterial Viral Twin Filter. European Ce , Bowei Dick Test 134 ° , Heart Stablizer Thin Mount With A Constant Low Profile Design For An Optimized Work Area.Stabilizer Allows A Vertical Drop Of The Flexlink Arm Into The Chest Cavity.Proprietary Technology Provides 180º Side-To-Side Range Of Motion Of The Arm.Integrated Channels Secure Tubing Away From The Work Area , Hearrt Positioner Active Suspension Technology Allows Normal Cardiac Motion And Maintains Stable Hemodynamics.Tissue-Conforming Suction Cup Uses Gentle Vacuum To Securely Lift And Hold The Heart.Designed For Apical Or Nonapical Placement , Hemofilter Adult , Hemofilter Ped. , Cabg Kit On Pumpannexure 1 , Double Valve Surgery Kitannexure 2 , Toff Surgery Kitannexure 3 , Sterile Collagen Sheets In Wet & Meshedform. Puretype 1&3Triple Helicalmembrane Bovine Originpreserved In A Mixture Of Iso Propyl Alcohol And Watergamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x10 , Sterile Collagen Sheets In Wet & Meshedform. Puretype 1&3Triple Helicalmembrane Bovine Originpreserved In A Mixture Of Iso Propyl Alcohol And Watergamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x10 , Sterile Collagen Sheets In Dryform. Puretype 1&3Triple Helicalmembrane Bovine Origingamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x10 , Sterile Collagen Sheets In Dryform. Puretype 1&3Triple Helicalmembrane Bovine Origingamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x20 , Sterile Porus Collagen Sheet In Dry Form ( Fish Origin ) 10X10 Cm , Sterile Porus Collagen Sheet In Dry Form ( Fish Origin ) 8 X 12 , Silicone Sheetpure Poly Siloxanebased Silicone Scar Managementproduct In Sheet Form.10X10 , Biofil Ab Sterils Medicated Collegan Particles5 Ml , Biofil Ab Sterils Medicated Collegan Particles10 Ml , Lipido-Colloid Contact Layer Impregnated With Silver Salts Urgotul Ag Silver Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles ( Cmc ) , Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Patented Lipido- Colloid Technology 10X12 , Lipido-Colloid Contact Layer Impregnated With Silver Salts Urgotul Ag Silver Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles ( Cmc ) , Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Patented Lipido- Colloid Technology 15X20 , Lipido-Colloid Foam Dressing With Adhesive Border Urgotul Sterile Self -Adherentpatented Tlc Matrix ( Lipido Colloid Technology ) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer , A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing.13X13 , Lipido-Colloid Foam Dressing With Adhesive Border Urgotul Sterile Self -Adherentpatented Tlc Matrix ( Lipido Colloid Technology ) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer , A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing.15X20 , Lipido-Colloid Foam Dressing With Adhesive Border Urgotul Sterile Self -Adherentpatented Tlc Matrix ( Lipido Colloid Technology ) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer , A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing.20X20 , Syringe For Pressure Injector Compatible With Imaxon Injector Zy6322 , Syringe For Pressure Injector Compatible With Imaxon Injector Art-700 , Y Adoptor For Pressure Injector Compatible With Imaxon Injector , Vessel Harvesting System , Vac Dressing Medium Npwtpolyurethene Foam Dressingwith Drape.Ruler. Trac Tubing.1 Ltr Cainester For Exudate Collection.Dgci, Fda And Ce Certified. Company Having Manufacturing And Import License. Compatible To Existing Machine , Vac Dressing Largenpwtpolyurethene Foam Dressingwith Drape.Ruler. Trac Tubing.1 Ltr Cainester For Exudate Collection.Dgci, Fda And Ce Certified. Company Having Manufacturing And Import License.Compatible To Existing Machine , Cainester500 Ml. Compatible To Existing Machine. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 5X7 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 6X10 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 9X15 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 9X20 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 9X25 Cm, It Should Have A Bsi Kitemark Certificate. , Polyurethane Film Peripheral Iv Dressing For Neonates Reinforced With Soft Cloth Border And Notch With Pattern Coated Acrylic Adhesive. It Has A Picture Frame Delivery System With 3 Extra Sterile Tape Strips For Additional Secural And And Complies With Iso-10993 Standards For Biocompatibility. Size: 3.8Cm X 4.5Cm. , Polyurethane Film Peripheral Iv Dressing Forpediatric Reinforced With Soft Cloth Border And Notch With Pattern Coated Acrylic Adhesive. It Has A Picture Frame Delivery System With 3 Extra Sterile Tape Strips For Additional Secural And And Complies With Iso-10993 Standards For Biocompatibility. Size: Size: 5Cm X 5.7Cm. , Polyurethane Film Peripheral Iv Dressing For Adult Reinforced With Soft Cloth Border And Notch With Pattern Coated Acrylic Adhesive. It Has A Picture Frame Delivery System With 3 Extra Sterile Tape Strips For Additional Secural And And Complies With Iso-10993 Standards For Biocompatibility. Size: 6.5Cm X 7Cm. It Should Be Approved By Hript And Hcipt Test. , Ioban 6650 , Pm Kit Doubleeuropean Ce / Usfda , Hme Filter , Ventilator Circuit 2 Water Trap With Mdi Adoptor Plain. Md / 5 Approved , Ventilator Circuit With Mdi Adoptor Single Water Trap. Md / 5 Approved , Bain Circuit Adult With Tubing. Md / 5 Approved , Bain Circuit Pediatric With Tubing. Md / 5 Approved , Dlt All Sizes , Act Crtidge , Snareadult , Snare , Catheter Mpa , Catheter Ma , Catheter Pigtail , Hydrophilic Coatedguide Wire 260 Cm Exchange Length.Should Available In 0.025, 0.032, 0.035, 0.038. Angled And Straight Tip. Fixed And Movable Core Ce Certified , Ptfe Guide Wire 260 Cm Exchange Length Extra Stiff ( Amplatzer Type ) .Should Available In 0.025, 0.032, 0.035, 0.038. Angled And Straight Tip. Fixed And Movable Core Ce Certified , Femoral Introducer Sheath 4, , 5, 6, 7 F With Punture Needle. Hydrophillic Coated.11 Cm Long. 18 G X 7 Cm Long Needle. 0.032 To 0.038 Guide Wire Compatible. Cross Cut Valve To Prevent Back Leak And Air Aspiration.Integral Side Port 3 Way Stopcock..Suture Eyefor Securing Sheath.Kink Resistantdialator Hub Lock Mechanism , Plasma Cassattee 10133 , Tyvek Roll3X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll4X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll6X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll8X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll10X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll14X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll16.5X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll20X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Multienzyme Solution. Anionic Multienzyme Solution With Sodium Tetraborate Decahydrate, Should Be Biodegradable And Free From Ethylene Glycol . Can Be Used Manually And Can Also Be Used In Aer. Effective In 3 Minutes. Pack Of 3.8 Liter , Dialyzer With Tubing1.4Single Use With Steam Sterlization. Filter And Tubing Should Be Same Manufacterur , Dry Bicarbonate Bag 650 Gm Bibag. Compatible With Fresenius Machine. , Citrosteril5 Ltr Each 100 Gm Citro Should Have 21 Gm Citric Acid. 1- Hydrate Lactic Acid And Malic Acid.Ph Value In Between 1.7 To 2.0 And Have Excellent Removal Oflimescale And Have Disinfection And Decalcification In One Process. , Diasafe , Long Term Chronic Dialysis Catheter Set Usfda / European Ce. Symetrical Tip. Antregrade / Retrograde. 15 Fr. 19 Cm , Long Term Chronic Dialysis Catheter Set Usfda / European Ce. Symetrical Tip. Antregrade / Retrograde. 15 Fr. 23 Cm , Dissector Grasping Forcep Maryland Medium Dia 5 Mm. Length 30 Cm With Plain Fiber Handle , Dissector Grasping Forcep Maryland Medium Dia 5 Mm. Length 40 Cm With Plain Fiber Handle , Atraumatic Grasping Forcep Fenestrated Double Slit Curve ( Sa ) Dia 5Mm Length 30 Cm With Fibre Handle Button Ratchet , Atraumatic Grasping Forcep Fenestrated Double Slit Curvedia 5Mm Length 40 Cm With Fibre Handle Button Ratchet , Atraumatic Grasping Forcep Fenestrated Medium ( Double Action ) Dia 5Mm Length 40 Cm With Fibre Handle Button Ratchet , Atraumatic Grasping Forcep Fenestrated Medium ( Double Action ) Dia 5Mm Length 30 Cm With Fibre Handle Button Ratchet , Needle Holder T.C. Curved Jaw Left Axial Handledia 5 Mm Length 30 Cm , Needle Holder T.C. Curved Jaw Left Axial Handledia 5 Mm Length 40 Cm , Atraumatic Grasper Allies ( Std Serration Jaw ) Serration, Dia 5Mm Length 30 Cm With Fiber Handle Button Ratchet , Allies ( Std Serration Jaw ) Grasping Forcep Fhbr 5Mm 40 Cm , Curve Scissor Metzabum Dia 5 Mm Length 30 Cm With Plain Fibre Handle , Curve Scissor Metzabum Double Action Dia 5 Mm Length 40 Cm With Plain Fibre Handle , 2 Way Suction Irrigation With Canula Dia 5Mm Length 30 Cm Shaft Non Insulated , 3 Way Suction Irrigation With Canula Dia 5Mm Length 40 Cm Shaft Non Insulated , Intermittent Catheters:With Lubricating Gel, Urine Collector, Made Of Dehp-Free Pvc, Silky Hydrophilic Coating, Based On Pvp, Blue Protective Catheter Sleeve, 1.3 Litre Urine Collection Bag Tip : Nelaton / Tiemann / Olive, All Size , Male / Female, All Sizes, Ce Approved. , Foley Catheter 2Way Made Of Silicon 6Fr, 8Fr, 10Fr, 12Fr, & 14Fr, 16Fr, 18Fr, 20Fr, 22Fr, 24Fr - Ce Approved, Transparent, Radiopaque Tip & Contrast Stripe, Valve For Luer & Luer-Lock Syringe Tips, Self Adhesive Documentation Labels, Sterile. , Infection Prevention Catheter ( Silicon ) Rusch :Made Of Silicone, Transparent, With Longitudinal Grooves For Drainage Of Urethral Secretion, With Prefilled Syringe For Balloon Inflation. Radiopaque Tip & Contrast Stripe Along The Catheter Shaft. Sterile, Single Use. Latex Free.Ce Approved. , Closed Urinary Drainage System, Rusch Infection Prevention Technology ( Silicon ) , Disposable 2000Ml, Length Of Tube 120Cm With Silicon Foley Catheter, Bacteria-Proof & Liquid-Tight Ventilation At The Bag, Flat Needle-Free Urine Sampling Port, Ce Approved. , Mechanical Rotatable Heart Valves For Both Aortic And Mitral Heart Position Available In Sizes 17 Mm To 33Mm. Bi-Leaflet And Rotatable. Protrusion Of Leaflets From The Housing Is 3.4Mm.Wall Clearance – 6.6Mm 85°. U.S Fda Approved.Pyrolytic Carbon. Patented Butterfly Upstream Pivot Design , Conduit Double-Velour Woven Fabric Offers Excellent Sealing Handling And Healing Characteristics.Collagen Impregnation Provides Uniform Tissue In-Growth And Biocompatibility. Rotatable Valve Attached. Cuff Configuration. Us. Fda Approved.Sizes: 19Mm To 33 Mm , Annuloplasty Tricuspid Ring Tarp Available In Sizes 25Mm To 35Mm. Tricuspid And Mitral Repair. Double Velour Cuff . Full Flexible Ring Can Be Tailored.Posterior Support.Flexible Design.Secure Ergonomic Holder And Handle.Open Holder Facilitates.Us. Fda Approved , Mitralrigid Rasr Ring Repair Solutions Available In Both Flexible As Well As Rigid Forms. Rigid Ring Is A Full 3D Ring Which Creates Natural Saddle Shape. Titanium Alloy Core.Polyester Cuff..Unique Triangular Core.U.S Fda Approved Rings.Sizes 22Mm To 34Mm. , Mitral Semi-Rigid Sarp Ringhas Three-Dimensional Flexibility. Preserve The Physiologic Movement Of The Valve Annulus.Sewing Ring Fabric: Polyester Double Velour.Core: Polyethylene.Sizes 24Mm-40Mm. Secure Ergonomic Holder And Handle Quickly Attach And Detach To Save Time During Implant.Solid, One-Piece Inner Core Resists Needle Penetration And Reduces The Potential For Suturing Through The Core.Usfda , Aortic Tissue Bioprostheticbiological Heart Valves For Aortic Heart Position Available In Sizes 19Mm-27Mm.Good Fluroscopic Visibility. Viv Ready Future Intervention. Triple Composite Porcine . Anti-Calcification Treatment Linx Ac Technology. Lowest Profile 9Mm. U.S Fda Approved.Low Pressure Glutarldehyde Fixation. Polyester Ring.Reduce Leaflet Stress. , Mitral Tissue Bioprostheticbiological Heart Valves For Mitral Heart Position Available In Sizes 25Mm-33Mm.Triple Composite Porcine Valves. Anti-Calcification Treatment Linx Technology. U.S Fda Approved.Low Pressure Glutarldehyde Fixation. Good Fluoroscope Visibility.Viv Ready Future Intervention.Lowest Profile 9Mm.Polyester Ring.Ratcheting System.Scalloped Inflow Surface. , The Endoscopic Harvesting System Should Be Designed For Use In Conjunction With The 7Mm Endoscope. Harvesting Cannula Should Have Four Lumens To House The Endoscope, C-Ring, Distal Lens Washer Tube & Bisector Bipolar Ligating Forceps For Ligation & Division Of Vessel Branches.C-Ring / Distal Lens Washer Should Be Independently Controlled By A C-Bisector Can Be Extended / Retracted Through The Main Cannula By Inserting It Into The Tool Adapter Port, And Rotated Independently.Bipolar Coagulation Should Be Achieved Using Electrosurgical Energy.Short Port Blunt Tip Trocar ( Btt ) Should Be Provided Which Is Used To Provide A Port Of Access For Insertion Of Endoscopic Instruments Into An Incision Site.Syringe Should Be Provided For Inflation / Deflation Of The Balloon. , Lb St. & Lb Bifurgated The World Only Dilatation Resistant , Gelatin Sealed , Koper Knitted Polyester Vascular Graft.Dramatically Reduced Dilatation , Superb Handling , Unique Rifampicin Ionic Bonding Options , Comprehensive Range Includes Supported Design . Gelsoft Plus , Lb Bifurgateed Bifurcate Grafts Has Unique Hydrolysable Gelatin Inpregnation , Proven Twillweave Base Fabric , Superb Handling , Excellent Suture Retention , Cardiothoracic And Abdominal Aplications . Gelweave , Lb St. Grafts Has Unique Hydrolysable Gelatin Inpregnation , Proven Twillweave Base Fabric , Superb Handling , Excellent Suture Retention , Cardiothoracic And Abdominal Aplications . Gelweave St , Branch Design , Aortic Arch Graftantegrade Flow Made Easy By The Perfusion Side Branch May Offer 1 ) Reduced Incident Of Temporary Neurological Deficits , Preventive Effect Against Embolic Stroke , Potential For Reduced Operating Time . Gelweave Plexus ( 4 Branches ) , Endovascular Stent Graft For Abdominal Aortic Aneurysms Approved At 90 Degree Neck Angulation, 2- Magnet Wire Cannulation For Contra Side, 3-Repositionability Of Graft Even After The Deployment, 4- Three Piece Stent Graft System Usfda. Anaconda , Endovascular Stent Graft For Thoracic Aortic Aneurysms And Disectons Graft With Length Upto 250Mm, 2- Dual Sheath For Minimise The Trauma , 3- Pre- Curved At Proximal End For Tortuous Anatomy, 4-Deliver System With Precise Deployment, -4Mm Tapering Across The Length I.E. 100 / 150 / 200 / 250Mmusfda / European Ce. Relay Plus , Frozen Elephent Trunk Gelatin Coating To Achieve Hemostasis & Prevent Ozzing, Antegrade Perfusion Branch, Shorter Circulatory Time, -Ring Stent For Better Conformability To Angulated Descending Aorta, - Sienna Collar To Achieve Distal Anstomosis, Plexus Braches Separtely For Supra Aortic Vessel Anastomosis, Delivery System- Ineer Melleable Shaft Allow To Suit For Different Anatomy, - Guide Wire Port To Ensure The True Lumen Insertion For Dissection, - Short Handle To Allow Better Visualization Of Operation Field. Thoraflex Hybrid. , Venous Sinus Self Expanding Nitinol Stent. Hybrid Designfor Radial Force With High Flexibility.Electro Polishing.Radiopaque Marker.Anti Jump Technique.Braided Sheath And Flexible Tip.Rounded Edges.Independent Ring System.High Vessel Wall.Flash Link.Open Cell Design.Introducer 10Fr. Guide Wire 0.035. 10, , 12, 14, 16, 18, Mm 60 / 80 / 120 / 150 Mm. 100 Cm , Venous Sinus Xl Self Expanding Nitinol Stent. Use In Ivc, Svc, And Aorta. Close Cell Design.High Radial Strength.Tantalum Marker .Anti Jump Technique.Radiopaque Marker.Braided Sheath And Flexible Tip.0.035. 14 & 16Mm Stent Should Have 6F Profile. 18Mm And Above Stent Should Have 10 F Profile.14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36 Mm 40 / 50 / 60 / 80 / 100 Mmx 100 Cm , Venous Sinus Obliquus Self Expanding Nitinol Stenthigh Flexible With Good Strength.Power Crown. Homogeneous Force Distribution.Anchor Ring. For Venous Obstruction Closeto The Bifurcation Of The Inferior Vena Cava. Anti Jump Technique.. Introducer 10F. Guidewire 0.03514, 16 80 / 100 / 150 Mm , Calcium Free ( Bss ) Balanced Salt Solutions In Non Pvc Bag 500 Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Periheral Line 1000Ml-1300Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Periheral Line 1400Ml-1600Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Periheral Line1800ml-2100Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Central Line 1000 Ml-1300Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Central Line 1400Ml-1600Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Central Line 1800Ml-2100Ml , Rfa Probe Catheter Compatiblewith Available Machine. Demonstration Mandate. , Variable / Adjustable Compression Wraps Are Designed To Aide People Living With Lymphedema, Chronic Edema, Non Elastic Adjustable And Reusable Compression Therapy Wrap Mimics The 50% Overlap Pre Shaped Curved Straps For Upper Limb ( All Sizes ) , Variable / Adjustable Compression Wraps Are Designed To Aide People Living With Lymphedema, Chronic Edema, Non Elastic Adjustable And Reusable Compression Therapy Wrap Mimics The 50% Overlap Pre Shaped Curved Straps For Both Hand & Leg ( All Sizes ) , A Latex Free Two-Component-System Consists Of An Padding Compression Bandage Which Facilitates The Wok Flow And A Cohesive Compression Bandage With Patented Safe Lock Technology Works On High Working Pressure & Low Resting Pressure And Is Also Washable & Resuable. Consisting Of Soft Compression Bandage ( 10 Cm X 3.5 M ) As First Layer ;Cohesive Compression Bandage ( 10 Cm X 6 M ) As Second Layer. , Compression System For Treatment Of Lymphological Indications Of Upper And Lower Extremities Consisting Of 2 Soft Compression Bandage , Elastic Conforming Bandages 4 Cm X 4 M, Soft Comression Bandages 10 Cm X 2.5 M X 0.2 Cm, Foam Rubber Pad Bandage 10 Cm X 1 M X 1 Cm, Short Strech Bandage 6 Cm X 5 M , Short Strech Bandage 8 Cm X 5 M, Short Strech Bandage 10 Cm X 5 M, Short Strech Bandage12 Cm X 5 M , 100% Cotton Wrap Having Lengthwise Elasticity About 90%, High Air Permeability, Textured Fabric, Cream Colored, Can Be Washed Up To 50 Times At 90 Degree Celcius 6 Cmx5 Mtr , 100% Cotton Wrap Having Lengthwise Elasticity About 90%, High Air Permeability, Textured Fabric, Cream Colored, Can Be Washed Up To 50 Times At 90 Degree Celcius 10Cmx5 Mtr , 100% Cotton Wrap Having Lengthwise Elasticity About 90%, High Air Permeability, Textured Fabric, Cream Colored, Can Be Washed Up To 50 Times At 90 Degree Celcius 8 Cmx5 Mtr , Bileaflet Prosthetic Heart Valve With Curved Leaflets - It Should Be Curved Pyrolytic Carbon Leaflets. Aerofoil Housing Profile. Innovative Hinge Mechanism. Titanium Housing Coated With Carbofilm. Soft Carbofilm Coated Swing Ring. Should Have An Opening Angle Of 80 Degree. Should Be Fda / Ce Approved. Should Be In Use Universally For At Least 15 Years. Should Be Available In Aortic And Mitral All Sizes. , Bieaflet Aortic Valve With Conduit - Should Have Dacron / Polyester. Should Be Collagen / Gelatin Impregnated To Control Hemostasis And Reduce The Hemorrhagic Complications. Should Have Mechanical And Bioprosthetic Heart Valve With Low Pressure Gradients And Leaflet Opening 75 Degree And More. Should Have Minimum Taper Conduit To Facilitate Strong Coronary Anastomosis. Should Not Have Any Pleats To Allow Easier Positioning And Attachment Of The Coronary Arteries. Wide Range Of Sizes 19Mm To 33Mm. Should Have Both Ce And Fda Approval. Dacron / Polyester Graft 24Mm To 34Mm. , Tricuspid Ring 3D Rigid – Annuloplasty Ring For Tricuspid Repair. Should Be Rigid Three Dimensional Annuloplasty Ring Incomplete In Shape To Avoid Interference To Conduction System. Height Should Be Less Than 3.5Mm. Additional Septal Lateral Compression. Should Have Titanium Core Encapsulated With Silicon And Covered With Polyester. Size – 26Mm – 34Mm. Should Be Us Fda / Ce Approved. , Mitral Ring Semi Rigid – Composite Annuloplasty Ring For Mitral. Semi Rigid Remodeling Ring With Anterior Flexibility, Posterior Semi Rigid. Should Have Polyester Knit Covering Silicon Core. Eyelet Design To Avoid Ring Dehiscense Alloy Encapsulated With Silicon Core And Has Polyester Knit Covering. Size – 26Mm – 34Mm. Should Be Us Fda / Ce Approved. , Pericardium Heart Valve With Carbofilm Coated Sewing Cuff ( Mitral ) The Valve Should Be Bovine Pericardium Made Of Double Sheet Structure Of Pericardium. The Leaflet Of Valve Should Be Fixed On A Flexible Polymeric Stent Can Tolerate Under Back Pressure Of 2.000Mmhg The Sweing Cuff Should Be Coated With Carbofilm To Improve Hemo-Compatibilty. The Tissue Should Be Fixed With Glutraldehyde And Then Neutralized With Homocystic Acid. It Should Be Stored In A Paraben Solution And Should Not Require Rinsing Of The Valve. Size 25 To 31Mm , Bovine Pericardium Heart Valve With Crown Design ( Aortic The Leaflet Of Valve Should Be Fixed On A Flexible Polymeric Stent Can Tolerate Under Back Pressure Of 2.000Mmhg 2. Low Profile Height 3. Sweing Cuff Diameter Should Be Less 4.The Tissue Anti Calcification Treatment Should Be Fixed With Octanediol Solution 5. The Tissue Used In The Valve Should Be 100% Bovine Pericardium Only. Size 19-29Mm , Radiofrequency Induced Thermotherapy Based Catheter For The Treatment Of All Grades Of Different Kinds Of Varicose Veins From The Very Small Spider Veins And Perforating Veins To Great Saphenous Vein ( Gsv ) , Catheters And The Needles Are Connected To The Central Unit Which Generates The High Frequency Signal. Tissue Is Heated Between 80°C And 120°C Using Catheter. Catheter Should Visual And Audible Indication For Pull-Back. All Types Of Catheters Should Be Use In Single Generator / Machine For Treatment Of Different Kinds Varicose Veins, , Bovine Pericardial Patch - 8 Cm X 8 Cm, Should Be Glutaraldehyde Free. Should Be Stored In Buffer Solution. , Bovine Pericardial Patch - 6 Cm X 6 Cm, Should Be Glutaraldehyde Free. Should Be Stored In Buffer Solution. , Bovine Pericardial Patch - 4 Cm X 4 Cm, Should Be Glutaraldehyde Free. Should Be Stored In Buffer Solution. , All In One Closed Iv Catheter System With Pre-Attached High Pressure Extension Set ( Up To 300Psi ) ; With Two Split Septum, Closed System Needle-Less Connectors; Catheter Made Up Of Vailone With Indwelling Time Of Up To 144 Hrs.; Needle Tip Encapsulated In Plastic Cap For Nsi Prevention; ‘Insta-Flash’ Technology For Instant Flash Back. 20, 22G , Dual Port Closed Needless Connector With Split Spetum And Transparent Housing , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With Heparinized Saline, Minimizing Break Loose Contamination, Pre Labelled And Pre Color Coded, Avoiding Medication Error, 10 Ml Diameter Barrel Size, Reducing Increased Flush Pressure, Heparin Is High Molecular Weight Heparin, Unfractionated, Compliance To Usp Standard. 5Ml 100 Iu , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With 0.9% Saline Solution Having Standard 10 Ml Syringe Diameter With Design To Minimize Syringe Induces Reflux. Should Be Latex & Pvc Free.The Saline Should Be Preservative Free. 10 Ml , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With 0.9% Saline Solution Having Standard 10 Ml Syringe Diameter With Design To Minimize Syringe Induces Reflux. Should Be Latex & Pvc Free.The Saline Should Be Preservative Free. 5 Ml , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With Heparinized Saline, Minimizing Break Loose Contamination, Pre Labelled And Pre Color Coded, Avoiding Medication Error, 10 Ml Diameter Barrel Size, Reducing Increased Flush Pressure, Heparin Is High Molecular Weight Heparin, Unfractionated, Compliance To Usp Standard. 5Ml 10 Iu , Sternum And Ribs Lock Plate Should Be Available In Different Sizes And Shapes To Be Supplied With Applier ( Gun ) . Sample Based Selection. Should Be Us Fda Approved , Sternum And Ribs Lock Screw 2.4Mm And 2.7Mm Diameter Cancellous Self Drilling Locking Screws With Applier. Should Be Available In Different Sizes Sample Based Selection. Should Be Us Fda Approved , Eptfe Cv Patch - They Are Soft And Pliable For Easy Surgical Positioning And Multidirectional Oriented Node Fiber Structure They Have Exceptional Strength. Available In 0.4Mm And 0.6Mm Thickness & 3Cm X 6Cm And 5Cm X 7.5Cm Width, Usage In Cardiac And Peripheral Repairs. No Preclotting And Excellent Biocompatibility , Eptfe Pericardial Membrane – 6.0 Cm X 12.0 Cms X 0.1Mm , Eptfe Pericardial Membrane – 12.0 Cm X 12.0 Cms X 0.1Mm , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv2 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv3 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv4 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv5 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv6 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv7 , Pta Dilatation Catheter Is A Semi-Compliant Balloon Catheter Consisting Of An Over The Wire ( Otw ) Catheter With An Angioplasty Balloon Fixed At The Distal Tip. Two Radiopaque Markers Delineate The Working Length Of The Balloon And Aid In Balloon Placement. In Tended To Dilate Stenoses In The Peripheral Arteries, To Treat Obstructive Lesions Of Native Or Synthetic Av Fistulae And / Or Re-Expand Endoluminal Stent Graft Elements In The Iliac Arteries. 3-12 Diameter Range And 20-300 Balloon Length. , Pta Dilatation Catheters Are Recommended For Use In Percutaneous Transluminal Angioplasty ( Pta ) Of The Renal, Popliteal, Tibi Al, Femoral, And Peroneal Arteries. To Facilitate Catheter Advancement Through The Vasculature And The Vessel Stenosis, Dual Layer Hydrophilic Coating Is Present On The Distal Segment Of The Shaft And The Balloon , Should Be Use In Percutaneous Transluminal Angioplasty Of The Femoral, Iliac, And Renal Arteries And For The Treatment Of Obstructive Lesions Of Native Or Synthetic Arteriovenous Dialysis Fistulae. High Performance Balloon Catheter Consisting Of An Overthe-Wire Catheter With A Balloon Fixed At The Distal Tip. The Proprietary Ultra Non-Compliant, Low Profile Balloon Is Designed To Provide Consistent Balloon Diameters And Lengths Even At High Pressures. Two Radiopaque Markers Delineate The Working Length Of The Balloon And Aid In Balloon Placement. The Coaxial Catheter Includes A Tapered Atraumatic Tip To Facilitate Advancement Of The Catheter To And Through The Stenosis , Should Be For The Treatment Of Atherosclerotic Lesions In Common And External Iliac Arteries With Reference Vessel Diameters Between 4.5 Mm And 12.0 Mm, And Lesion Lengths Up To 100 Mm. Balloon Expandable Vascular Covered Stent Is Comprised Of An Electropolished Balloon-Expandable Stent Made From 316L Stainless Steel, Encapsulated Between Two Layers Of Eptfe. The Covered Stent Is Supplied Pre- Mounted On An Over-The-Wire Delivery System With A Non-Compliant Balloon , Co2 Angiogaphy System. It Should Be Preset To 1.3Bar. It Should Enable A Safe Withdrawal Of Pure Medical Co2 From Gas Bottles. It Should Be A Two Stage Valve System. It Should Maintain A Safe And Constant Pressure. It Should Feature A Safety And Release Valve. Its Connectors Should Be Available In Various International Standards. It Should Have A 1.5M Length Gas Pipe Line With Connection To The Co2 Pressure Relief Valve. It Should Have A Special Stop Cock With 90Degrees Rotary Valve For Injection And Loading Procedure. It Should Have A Dose Chamber Adjustable In 20Ml Steps With A Locking Slider For Fixing The Desired Volume Setting. It Should Have A 1.5M Length Connection Tube To The Patient , Distaflo Cuff Bypass Graft Are Carbon Imregnated Inside And Promotes Natural Hemodynamics, Taper By 2Mm Over Distal End. Flex Small Beading For Torturous Anatomy And 18Mm Arteriotomy For Improved Flow And Increase Wall Shear Stress With Smooth Laminar Flow Available In 60, 70, 80 Cm Lengths , Soft Tissue Retractor And Protector With Green And White Rings , Perfadex Solution For Lung Transplant , Cell Saver Kit , Ecmo Disposable Kit Compatible With Existing Machine , Eco Active:Photocatalytic Dispersion Anti Bacterial Paint Free From Biocides And Pesticides It Should Produce Anti Bacterial, Anti Viral, Anti Fungal On The Surfaces Like, Furniture, Glass, Door, Walls Floor, Tiles Color Should Transluscent, Or Semi Transparent Should Clean Air & Surfaces Deodorise And Should Purifies The Air And Gives Permanent Effect For One Year With Detailed Proof No Flammable, Waterborne Invisible Ones Applied Density 1.01 Kg / L Does Not Create A Film, Yield : Around 20M2 / Lt, Application Temperature Between5 To 35 Degree And / Protect From Frost Test Report From International Acclaimed Certified Lab To Be Submitted. Product Should Be Make In India. The Product Should Be European Ce Certified. The Company Should Be En 1499:2013 , Alcohol Based, Quat Based Rapid Surface Wipes For Gadgets And Instruments For Surface Cleaning With Minimum Effectivity Time On Pathogens @ 30 Seconds To 5 Minutes Only And Ready To Use. The Wipe Size Should Be Min. 20Cm X 25Cm. Composition: - Each 100Gm Contains: 1-Propanol 30Gm 2-Propanol 45Gm Didecyle Dimethyl Ethyl Ammonium Chloride - 0.5Gm N-Alkyl Dimethylbenzyle Ammonium Chloride - 0.5Gm Poly Hexa Methylene Bigunide Hydrochloride- 0.5Gm • With Corrosion Inhibitors And Chelating Agents &Inert Ingredients Test Report From Nabl Certified Laboratory To Be Submitted. The Product Should Be Ce / Is Certified. The Product Should Be As Per En1500:2013 & Iso 9001 , Antimicrobial Sponge – It Should Be A Single Use Sterile Sponge Impregnated With 4% Chlorhexidine Gluconate Antiseptic Solution For Surgical Hand Disinfection And Skin Antisepsis. It Should Have Microbicidal Activity Against All Gram Negative And Gram-Positive Bacteria, Viruses And Fungi.Composition: -Chlorhexidine Gluconate-20% V / V With Organic Surfactant And Free From Sls With Moisturiser And Skin Softener. • Test Report From Nabl Certified Laboratory To Be Submitted. The Product Should Be Ce / Is Certified. The Product Should Be As Per En1500:2013 & Iso 9001. , Quat Base Aldehyde Free, Bleach Free, Rapid Surface Disinfectant For Medical Instruments & Electronic Devices. Composition: - Each 100Gm Contains: 1-Propanol 30Gm 2-Propanol 45Gm Didecyle Dimethylethyl Ammonium Chloride - 0.5Gm N-Alkyl Dimethylbenzyle Ammonium Chloride - 0.5Gm Poly Hexa Methylene Bigunide Hydrochloride- 0.5Gm • With Corrosion Inhibitors And Chelating Agents& Inert Ingredients. • Should Be Effective Against A Wide Variety Of Pathogenic Microorganisms Including Bacteria Antibiotic Resistant Bacteria, Virus, Fungus, Mould Etc. • Test Report From Nabl Certified Laboratory To Be Submitted. The Product Should Be Ce / Is Certified. The Product Should Be As Per En1500:2013 & Iso 9001. , Steriletransperantpolyurethaneadhesivecoatedsurgicalfilmwithsilverion Resistance To Ph Neutral Water Body Fluid, Detergent And Alcohol Transparent And Breathable Surface And Hold Drape Securely In Place Efficiencyupto24hr Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001 , Sterile Transperant Polyurethane Adhesive Coated Surgical Film With Povidone Iodine Resistance To Ph Neutral Water Body Fluid, Detergent And Alcohol Transparent And Breathable Surface And Hold Drape Securely In Place Efficiencyupto24hr Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Sodium Per Carbonate 43 Gm. Tetraacetyleehtylenediamine 22Gm. Oxygen Based Bleeching Agents>30% Non Ionic Surfactants <5% Phosphates <5% Edta And Salts Thereof, Enzymes Perfumes <5% Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Composition: Phosphoric Acid 25% And Cleaner. Instrument Strains Rust Remover With Chelating Agent With Amphoteric Solution Compatible With Manual And Ultrasonic Machine. Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001 , Composition: Chlorohexidinegluconate 20% V / W With Organic Surfactants And Free From Sls With Moisture And Skin Softener Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Nanosol Gel Polymer 60%C14, 30% C16, 5% C12, 5% C18, …….10% 68%C12, 32% C14………10% Inert Ingredient ………80% Usepa Registration Number Mandatory. Usepa Certificate Claim On N-Corona Virus To Be Submitted. Test Report From Internationally Acclaimed Certified Lab To Be Submitted. The Product Should Be Ce / Iso Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries. Certificate Should Be Authorized By A Member Of Multilateral Recognition Arrangement. American / European Certificate Of Free Sale Mandatory. Product Should Be Registered Under Fifra Section 3 ( C. ) 9 Under The Provisions Of Pr Notice 98-10. , Enzymatic Detergent Consists Of Neutral Ph. Or Low Alkaline To Which One Or More Enzyme Have Been Added Tosurfactant And Stabilizing Agent. Protease, Lipaseamylase Cellulose. Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries. , Nabo3-Nh2o 50% W / W Aldehyde Free, Biodegradable, Safe And Non-Hazardous. It Can Be Used For Sterilization In All Medicaldevice And Instrument Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries. , Chlorhexidine Gluconate 2% W / V Isopropyl Alcohol 70% V / V Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Amino Acid 5% 250Ml Without Sorbitol And Xylitol , L- Arginine 10 Gm Sachet ( L- Arginine 3.5 Gm ) , Integra Is Cannulawithout Injection Port With 10Cmextension Line . , Minoxidil 2% , Minoxidil 5% , Minoxidil 10 % , Podophyliin Toxin , Sulphur + Calamine , Sunscreen ( Octinoxate, Avobenzone , Oxybenzone ) Spf 30 , Clotrimazole 10Mg , ( Medium Chain Triglyceride ) , Budesonide 200 Mcg. , Formeterol 6Mcg.+ Fluticasone 250 Mcg. Inhalation , Formoterol 6 Mcg. + Budesonide 200 Mcg. , Formoterol 6 Mcg. + Budesonide 400 Mcg. , Leosalbutamol 50Mcg.+ Ipratopium 40Mcg. , Levosalbutamol Inhalation Solution 50Ml / Gm , Lignocaine 1% , 1.5% Hydrogen Peroxide , Fluticasone Ft , Midazolam 0.5Mg / 5Ml , Neomycin Sulphate And Bacitracin Zinc Ointment Usp 5 Mg + 500 Iu / Gm , Sodium Chloride 0.9% 3000Ml ( N.S ) , Sodium Chloride Bottel 100Ml , Magnesium Sulphate, Sulphacetamide, Urea 75 Gm , Clobetasol+Salicylic Acid 0.5%+6% , Heparin 50 Iu Benzyl Nicotinate 2 Mg , Fluticasone , Neomycin, Polmyxin And Bacitracin Zinc Ophthalmic 15 Gm Ip , Tacrolimus 0 .03%15 Gm , Tacrolimus 0 .1% 15 Gm , Zinc Oxide +Alo Vera +Semethicone , Omega 3Fatty Acid 50Ml , Caffiene Citrate Oral Solution , Mercunium Chloride , Salicylic Acid 16.7% + Lactic Acid 16.7% , Coloplast60 Gm , Eeg 400Gm , Diclofenac Each Transdermal Patch Contain 200 Mg Diclofenac , Povidone Iodine , Milk Low Birth Formula , Recombinant Human Growth Hormone 4Iu Vial With Syringe , Enterogermina 2Billion Spores 5Ml , Formeterol 20Mcg +Budesonide 0.5Mg , Levosalbutamol 2.5 Mg +Ipratropium 500 Mcg 2.5 Ml , N-Acetylcysteine ( Nac ) 200Mg / Ml , Budesonide 0.5Mg / Ml , Budesonide 1Ml , Glycopyrronium 25Mcg. Inhalation 2Ml. , Sodium Chloride 3 % , Tiotropium Bromide Dry Powder30 / Pack , Revolizer / Rotahaler Device , Root Canal Sealer ( Calcium Carbonate ) , Fosfomycin3gm , Hmffor Pretem , L-Arginine+Proanthocynadine Granules 3Mg , Polyethyene Glycol + Sodium Chloride+Sodium Bi Carbonate+Potassium Chloride , Racecadotril Sachet 30 Mg , Etanercept 25Mg / 0.5Ml , Polyethyene Glycol With Elctrolyte Approx 130Gm , Lidocaine10%20Ml , Superoxidized , Mesalazine , Glycerin2 Gm / Ml , Paracetamol 170 Mg Each Suppsitory Contain Paracetamol 170 Mg , Cefaclor Each 5 Ml Contain Cefaclor 125 Mg , Codienephosphate , Amlodipine Oral Solution 1 Mg / Ml , Artemether 40Mg + Lumefantrine 240 Mg 30Ml , B. Complex , Baclofen Oral Solution 5 Mg / Ml , Calcium Phosphate 200 Ml , Cefixime Oral Suspension50mg , Cefixime Oral Suspension 100Mg , Cefpodoxime Proxetil Oral Suspension 50Mg , Cefpodoxime Proxetil Oral Suspension 100Mg , Cefuroxime Axetil Oral Suspension 125Mg / 5Ml , Clarithromycin For Oral Suspension 125Mg / 5Ml , Cefoperazone 1Mg Inj. , Cyclosporine Oral Solution 100Mg / Ml , Rabbit-Atg ( Anti Thymocyte Globulin ) 250 Mg , Cyproheptadine200ml , Dextromethorphan Hcl + Chlorpheniramine , Diatrizoic Acid Salts & Meglumine 66% & Sodium 10% & Iodine Content 370 Mg / Ml 30 Ml , Drotavarine , Each 15 Ml Contains: Milk Of Magnesia 11.25 Ml+Liquid Paraffin 3.75 Ml170 Ml , Each 5 Ml Containing : Paracetamol 125 Mg + Ibuprofen 100 Mg 60 Ml , Enzyme 100 Ml , Esomperazole , Fluconazole Oral Suspension , Furosemide Oral Solution 10Mg / 30Ml , L-Carnitine 500Mg / 5Ml In 30 Ml , L-Carnosine 100Mg / 5Ml In 200Ml , Levofloxacin Oral Solution , Linezolid 100Mg / 5Ml In 30Ml , Mefenamice Acid 100Mg / 5Ml , Mefenemic Acid 50 Mg + Paracetamol 250 Mg / 60 Ml , Melatonin 60 Ml , Montelucast+Levocetrizine , Nitrofurantoin Oral Suspension 25Mg / 5Ml In 100 , Ondansetron Oral Suspension , Oxybutynin Oral Suspension5 Ml , Phenobarbitone 20Mg / 5Ml In 100Ml , Prednisoloneip 50Mg , Piracetam 500Mg / 5Ml In 100Ml , Potassium Magnesium Citrate , Ranitidine Oral Suspension , Rifaximin , Sodium Bicarbonate Oral Suspension , Sodium Picosulphate Oral Suspension , Sorbitol + Tricholine Citrate , Sucralphate , Triclofos Oral Suspension500 Mg / 5Mlin 30Ml , Ursodeoxycholic Oral Suspension 125Mg / 5Ml In 100Ml , Zinc Oral Suspension 20 Mg / 100 Ml , / Susp. Azithromycin Oral Suspension 100Mg / 5Ml , / Susp. Azithromycin Oral Suspension 200Mg / 5Ml , Midodrine 5Mg , Hydroxyurea 500Mg , Coq 300Mg ( Capsule Of Co-Enzyme Q10 With Lycopene, Selenium & Omega 3 Fatty Acid ) , Everolimus 5Mg , Everolimus 10Mg , Tacrolimus 0.25 , Nintedanib 150Mg , 6-Mercaptopurine 20 Mg , Acebrophylline Sr 200 Mg , Aceclofenac + Thiocolchicoside , Aceclofenac Sr 200 Mg , Aceclofenac+Paracetamol+ Serratiopeptidase ( 100+325+15 Mg ) , Afatinib 20 Mg , Afatinib 30 Mg , Afatinib 40 Mg , Alendronate Sodium 70 Mg , Alfuzosin 10 Mg , Alpelisib 150 Mg ( Monopoly ) , Alpelisib 200 Mg ( Monopoly ) , Alpelisib 250 Mg ( Monopoly ) , Amantidine 100Mg , Amisulpride 50 Mg , Apixaban 2.5 Mg , Apixaban 5Mg , Aripiprazole 10 Mg , Aripiprazole 5 Mg , Aspirinip 300 Mg , Aspirin Dispresible 325Mg , Atomoxetin 10 Mg , Atomoxetin 18 Mg , Atomoxetin 25 Mg , Atroxentine 250Mg ( Trientine Hcl ) , Axitinib 5 Mg , Bilastin 20 Mg , Biotin 5 Mg , Bosentan62.5 Mg , Bosutinib 500 Mg , Brivaracetam 50Mg , Buprinorphine 2 Mg , Calcium Acetate 667 , Calcium Folinate 15 Mg , Capmatinib 200 Mg ( Monopoly ) , Carbimazole 10 Mg , Cefixime + Potassium Clavulanate 200+125Mg , Cefpodoxime Proxetil 100Mg , Cefpodoxime 200Mg , Cefpodoxime Cv 375 , Chlordiazepoxide 25 Mg , Chlordiazsepoxide 10 Mg + Clidinium 25 Mg , Chlorthalidone 6.25 Mg , Cholchicine 0.5Mg , Cilostazol 50Mg , Cilostazol 100Mg , Clarithromycin 250 Mg , Clarithromycin 500Mg , Cilnidipine 5 Mg , Cilnidipine10 Mg , Cilnidipine 20 Mg , Clonazepam 0.25 , Clonazepam 1Mg , Clozapine 25 Mg , Clozapine 50 Mg , Clozapine 100 Mg , Cotriamazole 480Mgs , Cyproheptadine 4Mg , Cyproterone Acetate 2 Mg +Ethynil Estradiol. 035Mg , Dabigatran 150 Mg , Dabigatran 110 Mg , Dabrafenib 50 Mg , Dacomitinib 15 Mg ( Monopoly ) , Dacomitinib 30 Mg ( Monopoly ) , Dapagliflozin 10 Mg , Dapoxetine 30 Mg , Dapsone 100 Mg , Deflazacort 6Mg , Deflazacort 12 Mg , Desvenlafaxine 50Mg , Diclo & Sera& Para. , Diclofenac + Thiocolchicoside , Dienogest 2Mg , Diltiazemprolonged Released90mg , Dimethyl Fumarate120 Mg , Dimethyl Fumarate 240Mg , Disulfiram 125 Mg , Disulfiram 250Mg , Donepezil 5 Mg , Duloxetine Gastro Resistant 20 Mg , Duloxitine Gastro Resistant30 Mg , Dydrogesterone 10Mg , Eltrombopag 25Mg , Eltrombopag 50Mg , Empagliflazone 10Mg , Empagliflazone 25Mg , Entacapone 200 Mg , Erlotinib 150 Mg , Erlotinib 100Mg , Esomeprazole 40 Mg , Estradiolvalerate 2 Mg , Estradiolvalerate , Enzalupamide 40Mg , Ethynil Estradiol 0.02Mg+ Tab Desogestral 0.15Mg , Etizolam 0.5 Mg , Etoricoxib+Thiocolchicoside ( 60+8 Mg ) , Exemestane 25 Mg , Febuxostat 40 Mg , Febuxostat 80 Mg , Fexofenadine120 Mg , Fexofenadine180 Mg , Fingolimod 0.5 Mg , Fludrocortisone 100Mcg , Flunarizine 10Mg , Fluvoxamine 100 Mg , Fluvoxamine 50 Mg , Folinic Acid 15Mg , Formaline , Furosemide 20Mg + Spironolactone 50Mg , Glucosamine Hydrocloride + Diacerin 50 Mg , Ibrutinib 140Mg , Indomethacin 75 Mg Sr , Inositol + Myoinositol 1000Mg , Ivermectin 6 Mg + Albendazole 400 Mg , Ivermectin 6Mg , Ivermectin 12Mg , Ketoconazole 200 Mg , Lacosamide 50 Mg , Lamotrigine Dispersible 100Mg , Lapatinib 500Mg , Lenalidomide25mg , Lenalidomide 10 Mg , Lenvatinib 4 Mg , Lenvatinib 10 Mg , Levetiracetamip 250 Mg , Levodopa+Carbidopa 125 , Levodopa+Carbidopa+Entacapone 100Mg / 25Mg / 200Mg , Levofloxacin 750 Mg , Levosulpride 75Mg , Levothyroxine Sodium25 Mcg , Levothyroxine Sodium75 Mcg , Linaglipitin 2.5Mg , Linaglipitin 5Mg , Lopinavir 200Mg+Ritonavir 50 Mg , Loratadine 10 Mg , Lorlatinib 25 Mg , Lorlatinib 100 Mg , Megestrol Acetate 160 Mg , Melatonin 3 Mg , Melphalan 2Mg , Metolazone 5Mg , Methimazole5 Mg , Methimazole10mg , Methotrexate 7.5Mg , Methotrexate 15Mg , Methylphenidate 10 Mg , Methylprednisolone4mg , Methylprednisolone 16Mg , Methylprednisolone 8Mg , Meverberine 135 Mg + Chlordiazepoxide 10 Mg , Midostaurin 25 Mg ( Monopoly ) , Mirabegeron 25 Mg , Mirabegeron50 Mg , Mirtazapine 7.5Mg , Mirtazapine 15Mg , Mifepristone25mg , Montelukast 4Mg , Montelukast 5 Mg , Montelukast 10 Mg , Morphine10mg , Morphine30mg , Moxifloxacin400 Mg , Moxonidine 0.2 Mg , Moxonidine 0.3 Mg , N-Acetylecystine Effervescent Form, Orange Flavour, 600 Mg , Naltrexone50 Mg , Nebivolol 5Mg , Nebivolol 10Mg , Nicorandil 5Mg , Nicoumalone 1 Mg , Nicoumalone 3 Mg , Nicoumalone 4 Mg , Nifidipine 20Mg , Nifidipine 20Mg Sr , Nilotinib 150 Mg ( Monopoly ) , Nilotinib200 Mg ( Monopoly ) , Nilotinib 300Mg ( Monopoly ) , Nitazoxanide 500Mg , Nitrazepam 5Mg , Nitrazepam 10 Mg , Olaparib 50 Mg ( Monopoly ) , Olaparib 150 Mg ( Monopoly ) , Olmesartan Medoxomil 20 Mg , Orciprenaline 10 Mg , Osimertinib 80 Mg ( Monopoly ) , Oxcarbazepine 300Mg , Oxcarbazepine 450Mg , Oxazepam 15Mg , Pancreatin Gastroresistant 10, 000Mg ( With Proteiase & Amylase ) , Pantoprazole 20Mg , Paracetomol 650 Mg , Paroxetine 12.5Mg , Paroxetine 25Mg , Pazopanib 200Mg , Pazopanib 400Mg , Penicillin V 400Mg , Pentoxifylline Extended Release / Sr 400Mg , Perampanel 2 Mg , Perampanel 4Mg , Pheniramine 25 Mg , Phenozopyridine 200Mg , Pirfenidone 200 Mg , Pirfenidone 400 Mg , Piroxicam Dt 20Mg , Pomalidomide 2 Mg , Pomalidomide 4 Mg , Posacozazole 100Mg , Posacozazole 40Mg / Ml , Prasugrel 10Mg Tab , Prazosin 5Mg , Prednisoloneip 40Mg , Primidone 50 Mg , Primidone 250 Mg , Prochlorperazine 5Mg , Progesterone Only Pills , Propranolol 10Mg , Propranolol 40 Mg Sr , Propylthiouracil 100 Mg , Pyridoxine100 Mg , Ranolazine 500Mg , Rasagiline1mg , Regorafenib 40 Mg , Repaglinamide 0.5Mg , Repaglinamide 1Mg , Ribociclib 200 Mg ( Monopoly ) , Rifampicin 150 Mg , Rifampicin 450 Mg , Rifampicin 600 Mg , Rifaximin 200 , Rifaximin 550Mg , Rivaroxaban 10Mg , Rivaroxaban 15Mg , Rivaroxaban 20Mg , Rizatriptan 10Mg , Ropinirole 0.25Mg , Rosuvastatin 10Mg + Fenofibrate 160Mg , Ruxolitinib 5 Mg , Ruxolitinib 10 Mg , Ruxolitinib 15 Mg , Ruxolitinib 20 Mg , Selegiline 5Mg , Serratiopeptidase 10Mg , Serratiopeptidase 20 Mg , Sevelamer Carbonate 800 Mg , Sildosin + Dutasteride , Silymarin 70Mg. , Sitagliptine + Metformin ( 50 / 500 ) , Sildenafil 20 Mg , Sofosbuvir 400 Mg+ Velpatasvir 100 Mg , Solifenacin Succinate10 Mg , Sorafenib 200 Mg , Sultamicin 375 Mg , Sunitinib 12.5 Mg , Sunitinib 25 Mg , Sunitinib 50 Mg , Tacrolimus 1Mg , Tamsulosin + Dutasteride , Tapentadol50mg , Tegafur + Uracil 100 Mg , Tetrabenazine 25Mg , Ticagrelor 90Mg , Tofacitinib 5 Mg , Tolvapatan 15Mg , Topiramate50mg , Torsemide20mg , Tramadol 37.5Mg + Paracetamol 325Mg , Trametinib 0.5Mg + Davarafenide 150Mg ( Monopoly ) , Trimetazidine 35Mg , Trimetazidine 60Mg , Trypsin + Rutoside+Bromelain , Verapamil Hydrochloride Sustained Release 40 , Verapamil Hydrochloride Sustained Release 120 , Vildagliptin 50Mg , Voglibose 0.2 Mg Tab , Voglibose 0.3 Mg Tab , Warfarin 1Mg , Warfarin 2Mg , Warfarin 3Mg , Zinc 50Mg , Zolpidem 10Mg , Zonisamide 50Mg , Zonisamide 100 Mg , Tiotropium 9Mcg Inhaler , Human Albumin 20% In 50 Ml Vial , Tetanus Vaccine ( Adsorbed ) Ip In 0.5 Ml , Inj. Piperacillin 400Mg & Tazobactam 500Mg , Inj. Meropenam 1Gm , Inj. Ceftriaxone 1Gm , Usg Guided Nerve Stimilation Needle ( 360 Ultra ) , 811 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 812 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 813 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 814 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 815 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 816 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 817 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 818 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 819 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 820 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 821 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 822 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 823 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 824 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 825 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 826 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 827 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 828 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 829 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 830 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 831 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 832 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 833 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 834 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 835 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 836 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 837 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 838 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 839 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 840 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 841 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 842 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 843 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 844 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 845 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 846 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 847 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 848 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 849 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 850 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 851 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 852 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 853 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 854 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 855 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 856 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 857 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 858 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 859 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 860 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 861 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 862 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 863 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 864 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 865 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 866 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 867 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 868 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 869 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 870 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 871 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 872 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 873 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 874 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 875 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 876 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 877 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 878 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 879 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 880 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 881 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 882 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 883 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 884 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 885 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 886 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 887 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 888 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 889 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 890 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 891 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 892 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 893 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 894 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 895 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 896 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 897 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 898 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 899 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 900 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 901 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 902 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 903 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 904 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 905 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 906 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 907 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 908 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 909 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 910 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 911 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 912 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 913 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 914 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 915 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 916 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 917 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 918 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 919 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 920 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 921 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 922 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 923 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 924 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 925 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 926 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 927 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 928 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 929 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 930 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 931 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 932 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 933 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
40.
Housing Urban and Rular Development #10547526 Price Bid
Tender For Repairing And Renovation Work At Lok Kala Sangrahalaya District-Lucknow (U.P.)., 1 Reparing & renovation work at Lok Kala Sangrahalaya Distirct-Lucknow (U.P.) 2 RENOVATION WORK 3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 4 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 5 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. 6 Supply & filling of cinder in sunken portion of building including braking in to required sizes including supply of all material, T&P required size including of supply of all material , labour, T&P required for proper completion of work. 7 Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 9 Class-150 brick work in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work including supply of all materials, labour, tools and plants etc. required for proper completion of the work 10 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 11 Thermo-Mechanically Treated bars of grade Fe-500D or more in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 12 Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform 13 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 14 Dismantling existing plaster including disposal of refuseas directed by Engineer-in-charge within a distance of 60 meters.(200feet) 15 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarsesand. 16 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. 17 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 18 Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. 19 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. 20 Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. 21 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm(Anti skid/mat finished tile) 22 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm(Anti skid/mat finished tile) 23 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 24 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 25 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. 26 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 27 Providing and fixing aluminium work for doors, windows, ventilators and partitions witth extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to IS 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctins, i.e. att top, bottom and sides with required.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 28 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architecttural drawings and the directins of engineer-in-charge (Cost of aluminium snap beadingg shall be paid in basic item). With float glass panes of 8 mm thicness 29 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab upto 0.50 sqm) 30 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work 31 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 32 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. 33 Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- ections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 34 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm, of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. 35 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 36 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 37 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): 38 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 150 39 Providing and fixing Polyvinyl Chloride (PVC) pipes having thermal stability for hot & cold water supply including all PVC fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 40 90 mm dia 6 Kg Pressure 41 110 mm dia 6 Kg Pressure 42 160 mm dia 6 Kg Pressure 43 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. 44 Coupler 45 90 mm 46 110 mm 47 160 mm 48 Y Fitting without door 49 90 mm 50 110 mm 51 Single Tee without door 52 90 mm 53 110 mm 54 Single Tee with door 55 110 mm 56 160 mm 57 Bend 90° 58 90 mm 59 110 mm 60 Bend 45° 61 90 mm 62 110 mm 63 Bend 90° with door 64 90 mm 65 110 mm 66 P-Trap 67 N-Trap 68 Reducer Tee 69 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 300x16 mm 70 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mm 71 Providing and fixing ISI marked oxidised M.S. handles conforming to 1S:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 72 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm 73 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 74 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 75 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 76 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 77 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 78 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 79 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) 80 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 81 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. 82 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 83 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 84 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 85 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors,jointed with neat cement slurry mixed with pigment to match the shade of the tiles, includingrubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 86 REPAIR OF SANITARY WORK 87 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 88 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore 89 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 90 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. i) 32 mm dia 91 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms 92 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia 93 Providing and fixing toilet paper holder :C.P. brass 94 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. 95 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 96 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 97 25 mm nominal outer dia Pipes 98 32 mm nominal outer dia Pipes 99 40 mm nominal outer dia Pipes 100 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 101 15 mm nominal outer dia pipes 102 20 mm nominal outer dia pipes 103 25 mm nominal outer dia pipes 104 32 mm nominal outer dia pipes 105 Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 106 25mm dia, nominal bore 107 20 mm dia, nominal bore 108 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore 109 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 110 20 mm nominal bore 111 25 mm nominal bore 112 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore 113 Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. 114 Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore 115 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 116 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 117 Providing and fixing 100 mm sand cast Iron grating for gully trap. 118 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 119 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 120 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade 121 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 122 Providing & fixing soil, waste & vent pipes. 123 75 mm diameter 124 100 mm diameter 125 REPAIR OF ELECTRICAL WORK 126 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 127 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 128 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 129 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 130 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 131 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 132 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 133 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 134 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 135 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 136 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep 137 Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door 138 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door 139 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 140 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A 141 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 142 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. 143 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 144 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 145 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 146 Supply and fixing of LED Tube Light fitting suitable for up to 1X22 Watt LED Tube Light on surface complete in all Respect . 147 Supply and fixing of LED street light fitting having diecast aluminium body and diffuser/reflector with driver set suitable for 45 watt to 50 Watt confirming to IP 65 protection complete in all respect. 148 Supply and fixing 200 AMPfour pole Moulded case type on load change over switch with enclosure(also suitable for panel mounting with extra cost of bus bar) including the cost of labour, T & P , painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.- 149 Supply and fixing of 6 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect . 150 Supply and fixing of water tight oblong 10 Watt LEDbulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect. CAT. - AAA 151 Supply and Laying of 1800*900*12mm thick chequerd rubber matting of tested quality. complete in all respect. as per I.E. Rules. 152 Supply & erection of Wall FanAC 230/250 Volts, 50 Hz 50w 1350 rpm including nuts, bolts, mounting frame and other accessorieswith connections etc. complete as required. 153 Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. 154 Repairing of old ceiling fan 155 Supply Installation , testing and Commissioning ofSplit type air-conditioning system 1.5 TR with installation of indoor units, outdoor units, Outdoor Unit/Indoor with all fittings, installation of Copper Refrigerant piping (pair), as required , duly insulated with closed cell elastomeric nitrile insulation of 9 mm thickness12.7 mm / 9.5 mm- For 1.5 TR Unit,PVC Drain Water pipe with all fittings Make-Kisan Agro/Prince/Supreme 20 mm dia, laying of control cum transmission wiring between ODU & IDU, Stands for outdoor units(Small), Core Cutting Client Scope-Jheeriall complete as per direction of Engineer-in-charge. 156 GST Extra as applicable
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
41.
Rural Development #10527192 Price Bid
Supply Of Medicine And Material For Dho Zp Ahmednagar-1 Adhesive Plaster Cotton Based ( Hypo Allergic ) , Adhesive Plaster ( Zinc Oxide ) 7.5 Cm X 5 Mtr - Cotton Based Roll Of 7.5 Cm X 5 Mtr 2 Adhesive Plaster Cotton Based ( Hypo Allergic ) , Adhesive Plaster ( Zinc Oxide ) 10 Cm X 5 Mtr - Cotton Based Roll Of 10 Cm X 5 Mtr 3 Autoclave Indicator Tape , Label Size 6 Cm X 2.5 Cm Chemical Band : 4 Cm X 1 Cm With Green Colour & 5 Indicator On One Strip. 1 Box Contains 10 X 100 Mean 1000 Indicator Labls With Iso & C E Certification 4 Bandage Cloth As Per Schedule F-Ii Than , Bandage Cloth As Per Schedule Fii Of Drug And Cosmectic Act 1940 Than Of 100 Cm X 20 Mtr 5 Absorbant Surgical Gauze , Absorbent Surgical Gauze F Ii Drug And Cosmectic Act 1940 ( 50Cmx18 M ) In Than 6 Oxygen Tube With Nasal Prongs , Disposable Latex Free Super Soft Material Tube Non Toxic, Sterlized, Pyrogen Free Kink-Free, Crush-Resistant Tubing Long 7 Foot Tubing Nnon Flared Nostril Tips- Various Sizes - Adult, Paed & Neonetal Ce Marked Packed In One Palstic Bag With Label Containing Product Name .Mfg.Date, Exp.Date Mfg.By. 7 Rolled Cotton Bandage As Per Schedule F-Ii , Rolled Cotton Bandages As Per Schedule F Ii Drug & Cosmetic Act 1940 10 Cm X 4 Mtr 8 Rolled Cotton Bandage As Per Schedule F-Ii , Rolled Cotton Bandages As Per Schedule F Ii Drug & Cosmetic Act 1940 15 Cm X 4 Mtr 9 Rolled Cotton Bandage As Per Schedule F-Ii , Rolled Cotton Bandages As Per Schedule F Ii Drug & Cosmetic Act 1940 7.5 Cm X 4 Mtr 10 Makintosh Double Colour Water Proof Rubber , Rubber Makintosh Double Colour Rubber Sheeting, High Polymer ( 55% Grade A ) , Colour ( Green, Blue, Red ) , Thickness-0.4Mm, Width-110Cm Roll Of 30 Mtr I.S.Certified, Double Colour, Water Proof 11 Makintosh Double Colour Water Proof Rubber , Rubber Makintosh Double Colour Rubber Sheeting, High Polymer ( 55% Grade A ) , Colour ( Green, Blue, Red ) , Thickness-0.4Mm, Width-90Cm Roll Of 30 Mtr I.S.Certified, Double Colour, Water Proof 12 Urine Collection Bag , Urine Collection Bag - Disposable Sterile With Accurate Calibration Non Toxic, Tube Length 42Manufactured From Clinical Grade Pvc Sheet. Nsuper Smooth Kink Resistant Tube, Made From Medical Grade Pvc. With Connector. Nnon Return Valve And Drainage Outlet. Nprovided With Hanging & Carrying System. Ncapacity : 2000 Ml. Approx. Nsterile / Disposable / Individual Packed. 13 Suction Tube , Sterile Pvc Latex Free , Tube For Suction.Reusable 14 General Examination Gloves , Disposable Examination Gloves Made Of Soft Latex, Powder-Free; Highly Elastic And Tear-Resistant; Texturing Of The Finger Area Ensures Optimum Grip; Excellent Fit And High Tactile Sensitivity; With Astm, Iso & C E Approved Small / Medium / Large 15 Cotton Thread , Non Sterile Cotton Thread No. 10 Reel 16 Cotton Thread , Non Sterile Cotton Thread No. 20 Reel 17 Nebulisation Mask With Hudsons Chamber Pre-Sterilised Disposable , Soft, Clear Aerosol Mask With Anatomical Form Is Ideal For Long Term Use. Ngently Rolled, Feathered Edges With Integrated Nose Bridge For Extra Comfort. Nswivel Connector For Convenience Of Nebulization In Horizontal And Vertical Position Ensuring Patient Comfort. Nlarger Surface Area Provided By Unique Convex Cone Design, Ensures Maximum Capillary Action And Eliminates Medication Waste. Ngreater Nebulization Rate, Nebulizer 3Cc Within 10 Minutes. Ncomplete Set Consist Of: Aerosol Mask, Nebulizer Chamber, 2Mtr Multichannel Tube. 18 Plastic Appron , Plastic Apron Not Less Than 25 Microns , Non Boilable, Light Weight, Water Proof , Green Colour, Tie At Neck & Waist Length Upto Knee- Individually Packed 19 Disposable Insulin Syringes: 40 Unit. With Needle. Sterillised Non-Toxic. Unit 100 With Ce Certification , Disposable Insulin Syringe With 30Gx8mm , With Integrated Needle, Individually Npacked Marked 40 Iu / Ml 1 Ml / Disp.Insulin Syringes With Needle , , Ribbon Pack / Blister Pack Sterilised Non-Toxic Unit 40 With Ce Ncertification 20 Endotracheal Tube, Plain , Endotracheal Tube Plain - Pvc & Rubber Sizes 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11 21 Disposable Delivery Kit , Disposable Delivery Kit - •High Quality N•Sterilized Nspecifications: Nfor Doctors Use Ndisposable Head Cap. X 1 Ndisposable Face Mask With Filter X 1 Ndisposable P.V.C. Apron Full Length X 1 Ndisposable Shoe Cover X 2 Nfor Patient Use Ndisposable Pvc Drapes For Delivery Table-Length Upto Bucket ( W80cm X L140cm ) X 1 Ndisposable Delivery Sheet With Hole ( 100Cm X 100Cm ) X 1 Ndisposable Cord Clamp X 1 Ndisposable Hole Towel For Episiotomy Suturing ( 1 Mtrx ) X 1 Nfor Newborn Baby Ndisposable Wrapper For Newborn Baby X 1 22 Disposable Needle No. 26 , Disposable Sterile Needle No. 26 1 To 1.5 Disp.Sterilised Needles In Blister Pack / Riboon Pack Siliconised Sizes 26 G With Ce Certification 23 Disposable Plastic Gloves , Disposable Plastic Gloves Individually Packedmedical Grade Virgin P.V.C. / H.M.H.D. Dotted Excellent Grip Nlength: Free Size 11 1 / 2 / 29.21 Cm / 292.100Mm Ntype: Non Sterile / 50 Pcs / 100 Pcs Pack 24 Suture Needle Curved 1 / 2 Circle Round Body , Surgical Needle ( Suture Needles ) Curved Nround Bodied Different Sizes 6 To 10. 6 To 10 Is Certification 6 No. In One Pkt 25 Suture Needle Curved And Cutting 1 / 2 Circle , Surgical Needles ( Suture Needles ) Curved Ncutting Needle Different Sizes 6 To 10 Surgical Needles ( Suture Needles ) Curved Ncutting Needle Different Sizes 6 To 10 Is Certofication 6 No. In One Pkt 26 Suturing Needles Straight , Surgical Needle ( Suture Needles ) Straight Cutting Needles Different Sizes 6 To 10 6 To 10 , Is Certification 6 No. In One Pkt 27 Pricking Lancet, Pricking Lancet - Disposable / Single-Use N, Materials: Stainless Steel , The Ndisposable Lancet Is Sterilized By Ngamma Radiation Or E T O Sterilized . Nthe Lancet Comes With Smooth Tribevel Points. Quality In Accordance Nwith The Ce And Iso Standards 28 Pricking Lancet Needles, Disposable / Single Use Pricking Needle No. 24 The Disposable Lancet Needle Is Sterilized By Gamma Radiation. Made By Stainless Steel Ce & Iso Cerificate 29 Alcohol / Spirit Swab, Disposable Sterile Cotton Swab Sachet , 3Ml Sachet Containing Cotton Swab Of Isopropyl Alcohol 50 % By Volume And Rectified Spirit 20% By Volume Nor 3 Ml Sachet Containing Cotton / Cellulose Swab Of Isopropyl Alcohol 70% V / V 30 Ot Fumigation Solution 500 Ml, Hydrogen Peroxide 11% W / V With 0.01% W / V Silver Nitrate ) 31 Diazepam Tab, Tab. Diazepam 5 Mg 32 Diazepam Inj., Inj. Diazepam 5 Mg / Ml - 2 Ml 33 Pantoprazole Tab., Pantoprazole Tab. 40Mg 34 Promethazine Syrup, Sy Promethazine Hcl 5Mg / 5Ml 35 Adrenaline Inj., Inj. Epinephrine Hydrochloride Or Hydrogen Tartarate In 1 Mg / 1 Ml Ampoule / Inj. Adrenaline Bitartarate 1 : 1000 W / V 1 Ml. 36 Dexchlorpheniramine Maleate Syrup, Dexchlorpheniramine Maleate Syrup 2Mg / 5Ml 37 Tramadol Tab., Tab. Tramadol 50 Mg 38 Trimethoprim + Sulphamethoxazole Paed Tab., Tab. Cotrimazole ( Trimethoprim + Sulphametaxazole ) Paed Ntab. Cotrimoxazole ( Trimethoprim 20 Mg + Sulphametaxazole 100 Mg ) Paed 39 Trimethoprim + Sulphamethoxazole Susp., Sy. Cotrimaxazol - Each 5 Ml Contains Trimethoprim 40 Mg + Sulphamethoxazole 200 Mg - Bottle Of 50 Ml 40 Ampicillin Inj, Inj. Ampicilline 500 Mg. Inj. Ampicillin Powder For Injection: 500 Mg ( As Sodium Salt ) In Vial 41 Ampicillin Inj, Inj. Ampicillin Powder For Injection 1 G ( As Sodium Salt ) In Vial. 42 Amoxycillin Tab. Dt, Tab. Amoxycillin D T 125 Mg 43 Azithromycin Dt Tab. , Azithromycin Dt Tab 100 Mg. 44 Benzathine Penicillin Inj., Inj. Benzathine Penicillin 12 Lac Iu / Vial 45 Clotrimazole Vaginal Pessaries With Applicator, Tab Clotrimazole 100Mg Vaginal With Applicator 46 Syrup Furazolidone, Sy. Furazolidine 25 Mg / 5 Ml : 60 Ml. 47 Glyceryl Trinitrate Sublingual Tabs , Tab. Glyceryl Trinitrate 0.5 Mg 48 Isosorbide Dinitrate Tab, Tab. Isosorbide Dinitrate 5 Mg Aluminium Blister - Strip Of 10 Tablets 49 Isosorbide Dinitrate Tab, Tab. Isosorbide Dinitrate 10 Mg Aluminium Blister - Strip Of 10 Tablets 50 Ramipril Tab, Tab Ramipril 5 Mg 51 Enalapril Tab, Tab. Enalaprile Maleate 2.5 Mg 52 Enalapril Tab, Tab. Enalaprile Maleate 5 Mg 53 Amlodepin Tab, Tab. Amlodepin Besylate 2.5 Mg Aluminium Blister - Strip Of 10 Tablets 54 Amlodepin Tab, Tab. Amlodepin Besylate 10 Mg Aluminium Blister - Strip Of 10 Tablets 55 Nifedipine Cap ( Liquid ) , Cap.Nifedepine 5 Mg Aluminium Blister - Strip Of 10 Capsule 56 Nifedipine Cap ( Liquid ) , Cap.Nifedepine 10 Mg Aluminium Blister - Strip Of 10 Capsule 57 Metoprolol Tab, Tab Metoprolol 50 Mg 58 Atenelol Tab, Tab. Atenolol 25 Mg Aluminium Blister - Strip Of 14 Tablets 59 Atenelol Tab, Tab. Atenolol 50 Mg Aluminium Blister - Strip Of 14 Tablets 60 Atenelol Tab, Tab. Atenolol 100 Mg Aluminium Blister - Strip Of 14 Tablets 61 Frusemide Inj., Inj. Frusemide - 2 Ml Each 1 Ml Contains 10 Mg Furosemide 62 Frusemide Tab., Tab. Frusemide 40 Mg Aluminium Blister - Strip Of 10 Tab 63 Methyldopa Tab., Tab. Methyl Dopa 250 Mg Aluminium Blister - Strip Of 10 Tablets 64 Atorvastatin Tab, Tab. Atrovastatin 10 Mg 65 Glibenclamide Tab, Tab. Glibenclamide 2.5 Mg Aluminium Blister - Strip Of 10 Tab 66 Glibenclamide Tab, Tab. Glibenclamide 5 Mg Aluminium Blister - Strip Of 10 Tab 67 Etofylline + Theophylline Inj, Inj. Etophyllin 169.4 Mg + Theophyllin 50.6 Mg In 2 Ml - 2 Ml 68 Tab. Etophyllin + Theophyillin Sr, Tab. Etophyllin 231 Mg + Theophyllin 69 Mg S R Aluminium Blister - Strip Of 10 Tabs 69 Salbutamol Tab, Tab.Salbutamol Sulphate 4 Mg Aluminium Blister - Strip Of 10 Tab 70 Salbutamol Syrup, Sy. Salbutamol 2 Mg / 5 Ml = Bottle Of 100 Ml 71 Levo Salbutamol Respiratory Solution 0.0625 Mg / Ml, Levo Salbutamol Respiratory Solution 0.0625 Mg / Ml 72 Aminophylline Inj, Inj. Aminophyllin - 25 Mg Per Ml I.E. 250 Mg / 10 Ml W / V 73 Xylometazoline Nasal Drops, Xylometazoline Nasal Drops 0.05% Per Ml 74 Phenobarbitone Tab, Tab.Phenobarbitone Sodium 30 Mg 75 Phenobarbitone Tab, Tab.Phenobarbitone Sodium 60 Mg 76 Phenobarbitone Syrup, Sy Phenobarbitone 20 Mg Per 5 Ml - 60 Ml Bottle 77 Phenytoin Tab, Tab. Phenytoin Sodium 50 Mg 78 Phenytoin Tab, Tab. Phenytoin Sodium 100 Mg 79 Phenytoin Tab, Tab. Phenytoin Sodium 300 Mg 80 Phenytoin Tab, Tab. Phenytoin Sodium Er Tablet 300 Mg 81 Phenytoin Injection 25 Mg / 2 Ml Amp 82 Phenytoin Injection 50 Mg / 2 Ml Amp 83 Acetyl Salicylic Acid, Acetyl Salicylic Acid 300 Mg 84 Acetyl Salicylic Acid Tab.I.P , Tab. Aspirin ( Acetylsalicylic Acid ) 75 Mg Aluminium Blister Of 14 Tablets 85 Ethamsylate Tab, Tab. Ethamsylate 250 Mg 86 Anti Rabies Vaccine Im ( Human Tissue Culture ) , Anti Rabies Vaccine Tissue Culture 2.5 I U Per Vial Or Amp Or Purified Vero Cell Rabies Vaccine 2.5 Iu Per Vial Or Amp Or Anti Rabies Human Diploid Cell Vaccine Or Purified Chick Embryo Vaccine 2.5 I U Per Vial Or Amp I M Use. Sterile Water For Injection As Diluents Label Should Indicate For Im Use Ampoule / Vial Of 0.5 Ml 87 Anti Rabies Vaccine Im ( Human Tissue Culture ) , Anti Rabies Vaccine Tissue Culture 2.5 I U Per Vial Or Amp Or Purified Vero Cell Rabies Vaccine 2.5 Iu Per Vial Or Amp Or Anti Rabies Human Diploid Cell Vaccine Or Purified Chick Embryo Vaccine 2.5 I U Per Vial Or Amp I M Use. Sterile Water For Injection As Diluents Label Should Indicate For Im Use Ampoule / Vial Of 1 Ml 88 Lactulose Syrup, Lactulose Solution Contains Lactulose 667 Mg / Ml ( 10 G / 15 Ml ) . 89 Liquid Paraffin Bottle, Liquid Paraffin 500 Ml 90 Iron Sucrose - Ferric Hydroxide Complex With Sucrose Equivalent To Elemental Irons Inj, Inj. Iron Sucrose 50 Mg In 2.5Ml Ampoule 91 Anti-D Immunoglobulin Inj Mono / Polyclonal, Anti D ( Rho-D ) Immunoglobulin ( Human ) Ultra Filered Or Nano Filtered 300Mcg / 1500 Iu In Pfs / Single Dose Vial 92 Inj Magnesium Sulphate 50% W / V, Inj. Magenesium Sulphate50 % W / V - 2 Ml I.E. Each Ml Contain 500 Mg Magnesium Sulphate Per Ml 93 Misoprostol Tab, Tab Misoprostol 200 Mcg 94 Carboprost Inj, Inj Carboprost Tromethamine 250Mcg / Ml - 1 Ml 95 Methyl Prednisolone Tab, Tab Methyl Prednesolone 4 Mgtab Methyl Prednesolone 4 Mg 96 Hydrocortisone Sodium Succinate Inj., Inj. Hydrocortisone Sodium Succinate 100Mg; 97 Dexamethasone Tab., Tab Dexamethasone 0.5 Mg 98 Dextrose Inj I.V, I. V. . Dextrose Anhydrous 10%, Water For Inj. Qs. 500 Ml - Affs / Bfs / Ffs Technology 99 Dextrose Inj I.V, I.V. 25% Dextrose 100 Cc Affs Technology Ni. V. Dextrose 25% W / V - 100 Ml Affs / Bfs / Ffs Technology 100 Water For Injection, Sterile Water For Injection.5 Ml 101 Water For Injection, Sterile Water For Injection.10 Ml 102 Sodium Bicarbonate Inj., Inj. Sodabicarbonate 7.5 Mg / Ml ( 7.5% ) - 10 Ml Sodium Bicarbonate, Nonpyrogenic Solution Of Sodium Bicarbonate, In Water For Injection, It Contains No Antimicrobial Agent. Composition, Osmolarity, Ph And Ionic N ( Nahco3 ) ( G / L ) Osmolarity ( Mosmol / L ) ( Calc. ) *Ph Sodium Bicarbonate 103 Hydrogen Peroxide Ip, Hydrogen Peroxide 20 Volume 6% W / V 500 Ml 104 Surgical Spirit B.P., Surgical Spirit With Methyl Salicylate, Diethyl Phthalate And Castor Oil In Denatured Alcohol 105 Tr. Benzoin Bottle, Tincture Benzoin 500 Ml 106 Folic Acid Tab, Tab Folic Acid 5 Mg. 107 Iron + Folic Acid Tab, Feerous Sulphate 333-335 Mg ( Equivalent To 100 Mg Of Elemental Iron ) + Folic Acid I P 0.5 Mg 108 Iron + Folic Acid Tab , Ferrous Sulphate I P Equivalent To 30 Mg Of Elemental Iron + Folic Acid 250 Mcg 109 Cyanocobalamine Inj., Inj. Cyanocobalamin ( Vitamine B 12 ) 1000Mcg / Ml; Soln For Im Or Sc Inj; Contains Benzyl Alcohol.- 10 Ml 110 Calcium Gluconate Inj, Inj. Calcium Gluconate 100 Mg / Ml ( W / V ) 10 Ml 111 B Complex Injection, Each Ml Contains: Thiamine Hydrochloride 100 Mg, Riboflavin 5’ Phosphate Sodium 2 Mg, Pyridoxine Hydrochloride 2 Mg, Dexpanthenol 2 Mg, Niacinamide 100 Mg, With Benzyl Alcohol 2% As Preservative, In Water For Injection. Sodium Hydroxide And / Or Hydrochloric Acid May Have Been Used To Adjust Ph N 112 Vitamin A Capsule, Cap. Vitamin A 100000 Iu 113 Vitamin A Concetrated Solution, Concentrated Vitamin A Solution I P 1, 00, 000 I U Each Ml Contains Vitamin A I P Synthetic Equivalent To About 109500 I U / Gm - Bottle Of 100 Ml With Dropped Marked For Doses 114 Ascorbic Acid ( Vitamin C ) , Tab. Ascorbic Acid 100 Mg 115 Ascorbic Acid ( Vitamin C ) , Tab. Ascorbic Acid 500 Mg 116 Clotrimazole Lotion, Clotrimazole Lotion 1% V / V - 15 Ml 117 Clotrimazole Mouth Paint, Clotrimazole Mouth Paint 1% W / V - 15 Ml 118 Clotrimazole Dusting Powder, Clotrimazole Dusting Powder 1% W / W - 30 Gm 119 Metronidazole Gel, Metronidazole Topical Gel , 0.75%, - 45 Gm 120 Framycetin Sulphate Cream, Oint. Framycetin Skin 1 % W / W 100 Gm 121 Silver Sulphadiazine Cream , Silversulphadiazine Cream : Cream Sivlersulphadiazine 1% W / W 250 Gm 122 Benzyl Benzoate Lotion , Benzyl Benzoate Application 25 % W / W 100 Ml 123 Tr. Iodine Bottle, Tincture Iodine - Active Ingredientsiodine 2% Nsodium Iodide 2.4% , Alcohol 47% 124 Benzoic Acid 6% + Salicylic Acid Ointment 3%, Benzoic Acid 6% W / W + Salicylic Acid 3 % W / W Ointment - Tube Of 50 Gm 125 Betamethasone Ointment / Cream, Betamethasone Dipropionate 0.05% W / W - 15 Gm 126 Glycerine , Glycerin 500 Ml Glass Bottle N 127 Chloramphenicol Eye Applicaps, Chloromycetin Applicaps 1% W / W 128 Ciprofloxacin Eye Ointment , Ciprofloxacin Eye Ointment ( Ciprofloxacin Hydrocloride Equivalent To 3 Mg / G, Ciprofloxacin In An Anhydrous Ophth Oint Base ) 129 Inj. Pralidoxime Chloride 1 Gm ( Pam ) , Inj. Pralidoxime Chloride 1G / 20 Ml 130 Tab Hydrochlorothiazide 25 Mg, Tab Hydrochlorothiazide 25 Mg 131 Dicyclomine Hydrochloride Tab, Tab. Dicyclomine 10 Mg 132 Dicyclomine Hydrochloride Inj, Inj. Dicyclomine 10 Mg / Ml - 2 Ml 133 Escitalopram Tab, Tab. Escitalopram Oxalate 10 Mg 134 Clonazepam Tab, Tab. Clonezepam 0.5 Mg 135 Clonazepam Tab, Tab. Clonezepam 2 Mg 136 Nitrazepam Tab, Tab. Nitrazepam 5 Mg 137 Amitryptillin Hydrochloride Tab, Tab. Amitryptillin Hydrochloride 25 Mg Fc 138 Fluoxetine Cap, Cap. Fluoxetine Hydrochloride Equivalent To 20 Mg ( 64.7 Μmol ) Of Fluoxetine. The Pulvules Also Contain Dimethicone, Fd&C Blue No. 1, Fd&C Red No. 3, Fd&C Yellow No. 6, Gelatin, Sodium Lauryl Sulfate, Starch, And Titanium Dioxide 139 Imipramine Tab, Tab. Imipramine Hcl 25 Mg 140 Haloperidol Tab, Tab. Haloperidol 5 Mg 141 Donepezil Tab, Tab. Donepzil Hcl 5 Mg 142 Olanzapine Tab 5Mg, Tab. Olanzapine 5 Mg N 143 Olanzapine Tab 10Mg, Tab. Olanzapine 10 Mg N 144 Risperidone Tab, Tab. Resperidone 2 Mg 145 Trifluroperazine + Trihexyphenidyl Tab, Tab. Trifluperazine Hcl 5 Mg +Trihexyphenidyl Hcl 2 Mg 146 Betahistine Tab, Tab. Betahistine Hcl 16 Mg 147 Potassium Permangnate Packet, Potasium Permagnet Crystals 500 Gm 148 Saline Nasal Drop, Sodium Chloride 0.065% W / V Benzakonium Chloride Solution ( As Preservative ) 0.02%W / V Sterile Isotonic Aqueous Buffered Base Q.S. 149 Formaldehyde Tab, Tab Formaldehyde - 91% Paraformaldehyde N96% Paraformaldehyde- Paraformaldehyde 96% Tablets. ( A Single Tablet Consists Of Paraformaldehyde 1. 04 Gm. Eq. To Paraformaldehyde 1 Gm. ) = Available Strengths 250 Mg / 500 Mg / 1 Gm 150 Formaldehyde Solution, Formaldehyde 500 Ml 151 Benzalkonium Chloride I.P., Benzylkonium Chloride 50% W / V . - 500 Ml 152 Cetrimide + Chlorhexidine, Antiseptic Solution Containing = Cetrimide 3% W / V Chlorohexidine 1.5% W / V = 5 Ltr Jar 153 Dichloronetaxinol + Terpineol ( Soap Solution Base ) , Dichlorometxynol 1.88% + Terpineol 2% ( Soap Solution Base ) 5 Ltr Jar 154 Sodium Hypochlorite Sol., Sodium Hypochlorite Sol. Contains Not Less Than 4% And Not More Than 6% Sodium Hypochlorite. 155 Sodium Hypochlorite Sol. , Sodium Hypochlorite Sol. Contains Not Less Than 4% And Not More Than 6% Sodium Hypochlorite. 156 Urine Strips For Albumin & Sugar Reagent Covered / Protected With Nylon Mesh 157 Urine Strips For Sugar Albumin, Ph , Ketone &Blood Reagent Covered / Protected With Nylon Mesh 158 Hbsag Rapid Test 159 Pregeancy Test Kit ( Rapid ) 160 Anti Abd Kit 161 Test Tube Disposible With Cap , 5Ml , 162 Test Tube Disposible Without Cap , 5Ml , 163 Liquid Hand Wash Containg Non Lonic Surfactant ( Akyl Sodium Benzene Sulfonate ) 10% Buffered Ph7 ( + ) 1 ) With ) Fragrance And Colour Q.S. 164 Laboratory Cleaning Solution For Glass Plastic Floors Or Other Laboratory Utensils Contaning : Non Lonic Surfactant ( Akyl Sodium Benzene Sulfonate ) 12% Buffered Ph 7 ( + ) 165 Capillary Tube Bottle 166 Microcuvettes For Digital H.B.Meter ( Microcuvettes Compatable To Hemocue Company Digital H.B.Meter , Model No-Hemocue Hb201+ ) 167 Vdrl Test Kit , Set Of 3 Bottles 168 Ortho Toludine Soln 500 Ml Bott 169 Glacial Acetic Acid 5 % ( 1 Litre Bottle ) 170 Distilled Water ( 5 Litre Can ) 171 Examination Lamp 172 Mouth Mirror 173 Waist Measuring Tape 174 N- 95 Face Mask 175 Glucometer 176 Glucometer Strips 177 Propanalol 40 Mg 178 Propanalol 80 Mg 179 Propanalol 10 Mg 180 Clopidogrel 75Mg 181 Spironolactone 25Mg 182 Spironolactone 50Mg 183 Glimepiride 184 Metformin 750 Mg 185 Metformin 1000 Mg 186 Sodium Valproate Tab 200Mg 187 Sodium Valproate Tab 500Mg 188 Salbutamol Tab. 2 Mg 189 Salbutamol Respirator Solution For Use In Nebulizer 5Mg / Ml 190 Salbutamol Inhalation ( Mdi / Dpi ) 100 Mcg / Dose 191 Zinc Sulphate Dispersible Tab 20 Mg 192 Methylergometrine Tab. 0.125Mg 193 Cholecalciferol Tab.1000 Iu 194 Cholecalciferol Tab.60000 Iu 195 Vitamin A Capsule 5000 Iu 196 Vitamin A Capsule 50000 Iu 197 Phytomenadione ( Vitamin K1 ) Inj.10 Mg / 1 Ml 198 Activated Charcoal Powder 199 Snake Venom Antiserum Lyophilized Polyvalent 200 Pralidoxime Chloride ( 2 - Pam ) Inj. 25 Mg / Ml 201 Mefenamic Acid Capsule 250 Mg 202 Mefenamic Acid Capsule 500 Mg 203 Clotrimazole Drop 1% 204 Normal Saline Nasal Drops : Sodium Chloride Drops 05% W / V 205 Wax - Solvent Ear Drops : Paradichlorobenzene 2% + Chlorbutanol 5% + Benzocaine 2.7%+Turpentine Oil 15% Ear Drops - 10 Ml 206 Boro - Spirit Ear Drops 0.183Gm Boric Acid In 2.08 Ml Of Alcohol 207 Combo Ear Drops 208 Each Tab. Contain:* Sounth, Pippali Or Equivalent Formula 209 Each Tablets Contain * Chirata ( Swertia Chirata ) , *Saptapani ( Alstonia Scholaris ) , Kukti ( Picrohiza Kurroa ) , Sagargoti ( Caesalpinia Crista ) Or Equivalent Formula 210 Churna Contains :*Agasta Chhal ( Sesbania Grandifolla ) , Kantakarimool ( Solanum Xanthocarpum ) , *Akkalkara Mool ( Anacycius Pyrethrum ) , Kewanch Been ( Mucucna Pruriens ) , Umbar Chaal ( Ficus Glomeraga ) , Punarnava ( Boerhaavia Diffusa ) , Maricch Phal ( Piper Nigrum ) , Rewandachini ( Rheum Emodi ) , Lajjwani Panchag ( Mimosa Pudica ) , Saalam ( Orchis Mascula Or Longifolia ) , Neem Patra ( Azadircta Indica ) , Punnah ( Colophyllum Inophyllum ) , Shigru Phal ( Moringa Pterygosperma ) , Tulsi Patra ( Ocimum Scantum ) , Haritaki Phal ( Triminalia Chebula ) , Amalaki ( Emblica Officinate ) , Giloy ( Tinospore Cordifolia ) , Yashtimadhu ( Glycyrrhiza Glabra ) , * Jaifal ( Myristica Fragrans ) , Bhumi Amala ( Phyllanthus Niruri ) , Asheagandha ( Withanie Sommfera ) , Vidang ( Embelia Ribes ) Bharangi ( Clerodendron Serratum ) , *Chitrak ( Plumbago Zeylanicum ) , Bhunimba ( Andrographis Panniculata ) , Arjuna ( Terminalia Arjuna ) , Shatavari ( Asparagus Racrmosus ) , Dadim ( Pu Nica Granatum ) , Goksjur Mool ( Tribulus Terrrestries ) , *Vidarikand ( Pueraia Tuberosa ) Or Equivalent Formula 211 Each Capules Contains :* Dry Karela ( Momordics Charantia ) , * Neem Patra ( Azadiracta Indica ) , Tulsi ( Ocimum Scantum ) Kutki ( Pivtothiza Kurroa ) , Shudh Guggul ( Commlphora Mukul ) , Sounth ( Zingiber Officina ) Or Equivalent Formula 212 Each Film Coated Tablet Contains : Harade Ghana ( Terminelia Chebula ) , *Sonamukhi Ghana ( Cassia Angustifolia ) Or Equivalent Formula 213 Syrup 200 Ml Contains: *Amalki Shatavari, Yastimadhu, Jatamansi, *Shankh Bhasma Or Equivalent Formula 214 Each Tablet Contains: *Rasna, Guduchi, *Sunthi, Deodaru, Erandmoolm Or Equivalent Formula 215 Each Tablet Contains :* Aswagandha, *Prataplankeshwar Ras, Punarnava, Gokhur, Bilva, Jasad Bhasma Or Equivalent Formula 216 Each Tablet Contains: Gokshur, Shunthi, *Vaivarna, *Pashanbhead Or Equivalent Formula 217 Syrup 200 Ml Contains : Ashok Chhal, * Kalajeera, Nagarmotha, Sunthi, Daruhaladi, *Kamalphool, Harada, Baheda, Amala, *Aam Guthali Giti, Jire, Adulsa, Rakta Chandana Or Equivalent Formula 218 Syrup 200 Ml Contains :*Sapfed Chandan, Lal Chandana, Khas, *Kamala Phoola, Gulab Phool, *Dhaniya, Saunf, Ela, Musta, Guduchi, Neem, Shital Mirchi , Pittapadapa, Daru Haridam, Devdar, Ikshumool, Dhamasa, Kans Mool, Kush Mool, Darbh Mool, Gokshur, Sahdevi, Brahmi, Shankhpushpi, Gavjava, Jatamansi, Gorakh Moondi, Banafsha, Aawala, Haritaki, Bibhitak, Shatavari, Kawanch Beej, Talimkhana Or Equivalent Formula 219 Syrup 200 Ml Contains:* Sunthi, Shatavari, Aswagandha, Gulaphool, Badishep, Anardana, *Choona Nivali, Sugar Syrup Or Equivalent Formula 220 Syrup 200 Ml Contains * Varatika, Dugdhapashana Mouktika Sukti, Processed In Amalki, Guduchi, Punarnava Or Equivalent Formula 221 Ointment 30Gm Contains: Extracts Lajjalu ( Mimosapudika ) , Nirgundi ( Vitexni Gundo ) , Zergul ( Calendula Officinails ) , Bhringraja ( Eclipta Alba ) Powders ( Cinnamonumcamphora ) , Base Q.S. Or Equivalent Formula 222 Syrup Contain :* Hisara ( Capparis Spinus ) , Kasani ( Scichorium Intybus ) , Kakamachi ( Solanumnigrum ) , Kasmard ( Cassia Occidentals ) , Arjun ( Terminalia Arjuna ) , Biranijasiapha ( Achilea Milefolium ) , Javaka ( Tamarix Gallica ) , *Mandura Bhasma Processesed In Bhingraja ( Ecliptaalba ) , *Bhumiamalaki ( Phyianthus Amarus ) Punarnava ( Boerhasia Diffusa ) Guduchi ( Tinospora Cordifolia ) , Daruharidra ( Berberis Aristata ) , , Mulka ( Raphanous Sativas ) , Amalaki ( Emblica Officinails ) , Chitraka ( Pumbago Zeylenica ) , Vidanga ( Embolic Ribes ) , Haritaki ( Terminalia Chebula ) , Parpate ( Fumaria Officinais ) Or Equivalent Formula 223 Syrup 200Ml Contain *Barhi Indrayan Ki Jarh , Arjun Chal, Peepali, Dashmool, Rasna, Dewdaar , Sahinjana , Shwet Punarnawa , Nirgundi, Arni Ki Chal, Haritaki , Ajmoda , Chitrak, Suger, Water. Or Equivalent Formula 224 Gel Contains:* Exts. Nirgundi ( Vitex Nigundo ) , *Devdaru ( Cedrus Deodara ) , Sunthi ( Zingiber Officinails ) , Shallaki ( Boswelliaserrate ) , Pundia ( Mentha Arvensis ) , *Tvak ( Cinnamonum Zeylanicum ) , Sarala ( Pinus Roxburghil ) Gandhapurataila ( Gaultheria Fragrantissima ) , Base Or Equivalent Formula 225 Each 20 Gm Ointment Contains : Ghrut, *Raj, Sudha Churna, *Suvarna Gairik, Kapur, Kadunimb Oil, Kokam Oil Or Equivalent Formula 226 Each 20 Gm Cream Contains : Till Oil, * Rai ( Resina Fleva ) , Mayur Tutha, Distilled Water Or Equivalent Formula 227 Each Tablet Contains * Hardia Khanda Choorna Laghusutashekhar, *Sheetpuitta Prabhanjan, Muktashukti Pishti Or Equivalent Formula 228 Nerve Disorder Each Capsule Contains : Mahavatvidhwans Ras, Sameerpannag Ras, Ekangveer Ras, Soothekher Ras, Khurasani Owa ( Hyoscymus Nigerlinn ) Ext. Lajari ( Mimosa Pudica ) Or Equivalent Formula 229 Local Application Oil Contains : Nirgundi Pan, Ark Pan, Shatavari, Ashwagandha, Sahachar, Til Oil, Gandjapurav Oil, Pudina Ke Pool Or Equivalent Formula 230 Syrup Contains : Yashtimadhu, Vasa, Kantkari, Amalki, Kankol, Pushkar Mool, Sonnth, Pippali, Tulsi, Haridra, Sugar Base & Flavour Q.S. Or Equivalent Formula 231 Syrup Contains : Amalki, Guduchi, Shatavari, Balamool, Bhiamla, Draksha, Ashwagandha, Yashtimadhu, Chitrak, Vidang Or Equivalent Formula 232 Oil Contains : Clve Oil, Nilgiri Tel, Kapoor, Pudina Phool, Mustered Oil, Til Oil Or Equivalent Formula 233 Each Capsule Contains : Arjun, Maida Kaldi, Kandvel, Kukkutandatwak Bhasma Or Equivalent Formula 234 Each Capsule Contains Extract Of : Jamun Beej ( Syzgium Cumini ) , Gudmar ( Gymnema Sylvestere, Methi Dana ( Trigonella Foenum Gracenum ) , Giloy ( Tinispora Cardifolia ) , Amalki ( Embellica Offcinalis ) , Bimba ( Cocinia Indica ) , Karela ( Mimordica Charantia ) , Shudh Shiljit ( Asphaltum Punjabium ) , Process In Decoction Of Methidana Or Equivalent Formula 235 Each 30Gm Contains Extract Of Kutuja ( Holarrhena Pubesens ) Vidanga ( Embelia Ribes ) , Daruhalad ( Berberis Aristata ) , Samudra Lavana ( Sodium Salt ) , Bida Lavana ( Pottasium Salt ) , Nimbu Satva ( Citric Acid ) , Sharkara ( Dextrose ) Q.S. Or Equivalent Formula 236 Each 5Ml Contains Aqueous Extracts Of Adhatoda Vasaka ( Adulsa ) , Ocimum Sanctum ( Tulsi ) , Solanum Xanthocarpum ( Kantkari ) , Terminalia Belerica ( Behada ) , ?Glycyrrhizae Glabra ( Jeshtimadh ) , Zingiber Officinale ( Sunanth ) , Ammonium Chloride ( Navasara ) , Camphor ( Kapur ) , Peppermint Or Equivalent Formula 237 Each Tablet :* Hisara ( Capparis Spinosa ) , Kasani ( Cichorium Intybus ) , Kakamachi ( Solanum Nigrum ) , Arjun ( Terminalia Arjuna ) , Kasamarda ( Cassia Occidentalis ) Biranijasiapha ( Achilea Milefolium ) , Javaka ( Tamarix Gallica ) , *Mandura B Hasma Processesed In Bhingraja ( Eclipta Alba ) , *Bhumiamalaki ( Phyllanthus Amarus ) Punarnava ( Boerhasia Diffusa ) Guduchi ( Tinospora Cordifolia ) , Daruharidra ( Berberis Aristata ) , , Mulaka ( Raphanus Sativas ) , Amalaki ( Emblica Officinails ) , Chitraka ( Plumbago Zeylenica ) , Vidanga ( Embolic Ribes ) , Haritaki ( Terminalia Chebula ) , And Parpate ( Fumaria Officinais ) Or Equivalent Formula 238 Each Tube Contain Halad ( Termeric ) Mruddarshrungak , 25 Gm Or Equivalent Formula 239 Shatavari Kalpa Or Equivalent Formula 240 Mahanaryan Tail Or Equivalent Formula 241 Haridra Khand Or Equivalent Formula 242 Each Tablets Contain Guggul, Shankhabhasma, Yastimadhu, Shigru, Manjistha, Gilog, Maharasanadi Kwath, Amala Or Equivalent Formula 243 Vasavleha Or Equivalent Formula 244 Anu Tail Or Equivalent Formula 245 Trifala Guggul Or Equivalent Formula 246 Gokshuradi Guggul Or Equivalent Formula 247 Mahayograj Guggul Or Equivalent Formula 248 Yograj Guggul Or Equivalent Formula 249 Kaishor Guggul Or Equivalent Formula 250 Mahamangrasthidi Or Equivalent Formula 251 Jatadi Tail Or Equivalent Formula 252 Vishgarbh Tail Or Equivalent Formula 253 Panchendriaya Vardhan Tail Or Equivalent Formula 254 Chandra Prabha Vati Or Equivalent Formula 255 Arogya Vardhani Vati Or Equivalent Formula 256 Gandhak Rasayan Vati Or Equivalent Formula 257 Sukshma Trifala Or Equivalent Formula 258 Sarpagandhadi Vati Or Equivalent Formula 259 Tribhuan Kirti Vati Or Equivalent Formula 260 Sut Shakhar Vati Or Equivalent Formula 261 Shankh Vati Or Equivalent Formula 262 Sanjivani Vati Or Equivalent Formula 263 Dhatri Loha Or Equivalent Formula 264 Bhrami Vati Or Equivalent Formula 265 Guduchighan Vati Or Equivalent Formula 266 Chitrakadi Vati Or Equivalent Formula 267 Sukhsadhak Vati Or Equivalent Formula 268 Bakuchighan Vati Or Equivalent Formula 269 Kailas Jivan Or Equivalent Formula 270 Abhayarishata Or Equivalent Formula 271 Ashokarishta Or Equivalent Formula 272 Kutjarishta Or Equivalent Formula 273 Punarnavasav Or Equivalent Formula 274 Dashmularishta Or Equivalent Formula 275 Arjunarishta Or Equivalent Formula 276 Swas Kuthar Ras Or Equivalent Formula 277 Kamdudha Ras 500 Gm Or Equivalent Formula 278 Kumari Asav 500 Mlor Equivalent Formula 279 Sitopaladi Churna Or Equivalent Formula 280 Talisadi Churna Or Equivalent Formula 281 Hingvashtvak Churna Or Equivalent Formula 282 Avipittakar Churna Or Equivalent Formula 283 Trifala Churna Or Equivalent Formula 284 Balchatur Bhadra Churna Or Equivalent Formula 285 Swadishta Virechan Churna Or Equivalent Formula
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 17
Maharashtra View Result →
42.
Drinking Water Supply and Sanitation #10523073 Price Bid
Tender For Interception & Diversion (I&D) & Stp For Existing Drain In Dhampur Town/Npp, Distt Bijnor - Civil Works of 7.2 MLD STP and 7 KLD Septage Co-Treatment Facilities 2 Design, Construction, Supply of all materials, Erection and Commissioning of 7.2 MLD STP and 7 KLD Septage Co-Treatment Facilities with all the civil,LT/HT panel room, sub station building, DG set foundation, admin buidling, laboratories, meter room and campus development [Construction of Internal Road (CC Road, 3.6m wide, area approx 2000sqm),fiiling of earth if required]fully furnished administrative building having fully functional testing laboratory, PLC/SCADA Rooms, Power Generation building, Blower building, sludge handling system & other building required for technology proposed. OCEMS system at inlet & outlet of STP and master control station (MCS) at STP. Conference room suitable for 15 people, 4 rooms with a attached toilet for supervisory staff and a toilet block, drinking water cooler, all office rooms and conference room (Air Conditioned)., staff quarters as per requirement and specification, external water supply (20KL tank including tube well and pumping arrangement,sanitation work) etc. all complete for STP with co-treatment facilities. STP shall be based on SBR Technology OR any proven technology. The effluent quality for agricultural uses (PH-6.5 TO 8.3, SS-30 mg/l, Oil&Grease-10 mg/l, BOD-10mg/l) , COD-30 mg/l , Residual chlorine-nil , TKN-10mg/l, Nitrate N-10 mg/l, F.C.-230 MPN/100 ml, Dissolved P-5 mg/l (preferable 2 mg/l). ) shall be maintained asper CPHEEO manuals. Latest NGT norms for effluent discharge shall be adhered. The cost is inclusive of (Peak flow 24.11 MLD) (civil works). 3 INTERCEPTOR SEWERExcavation below G.L. upto depth as specified for laying sewer and manhole ordinary soil (earth, sand, loam and clay) including cutting of joints pits ramming dressing) leveling, refilling of trenches in 20 cm layer watering and ramming the same including (8% reduction due to excavation already taken in manhole and SCC) 4 (a)0.00 to 1.50 m 5 (b) 01.50 to 03.00 m 6 (c) 03.00 to 04.50 m 7 Provide and fix close timbering in trenches for the depth as specified below G.L. consisting of 40 mm thick approved country wood plank for polling board 125 x 75 mm eucalyptus-Safeda-Sal Wood wallers and 100 mm dia ballies for shuttering at 1.5 m C/C including all labour etc , complete 8 (a)1.5 to 3 m 9 (b) 03.00 to 06.00 m 10 Same as item No. 3 but for open timbering (No timbering for depth <1.50m) 11 (a) 1.50 to 03.00 m 12 Timbering left in trenches (No timbering for depth <1.50m) 13 Open Timbering left in trenches (used timbering) 0-3m depth 14 Closed Timbering left in trenches(used timbering)0-3m depth 15 Closed Timbering left in trenches(used timbering)3-6m depth 16 Supply of following sizes of RCC spigotted and socketed non pressure pipes( Dia. In mm ) with structural strength as per IS 458 : 2003 and its latest amendment(s).NP3 17 600 mm dia 18 700 mm dia 19 Carting following sizes of R.C.C. Hume pipe NP3 Class Socket / spigot rubber ring jointing and specials from store to the work lowering and laying the same in to the trenches upto depth as specified below G.L. true to alignment600 mm dia pipe 20 01.50 - 0 3.00 m 21 03.00 - 04.50 m 22 700 mm dia pipe 23 01.50 - 0 3.00 m 24 Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm gauge approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for the proper completion of work. 25 (c) 03.00 to 04.50 m 26 Filling granular material (well graded crushed rock or gravel maximum size 20mm) into the trenches for class B bedding (granular bedding) including watering compaction, labour T&P etc. for completion of work. 27 (b) 01.50 to 03.00 m 28 Supply (excluding cartage) of granular material (well graded crushed rock or gravel of maximum size 20mm)for class B bedding (granular bedding) 29 Construction of circular type brick masonry HD (HD25) manhole (with Extra Heavy Duty type manhole cover) with top slab made of cement concrete 1:1.5:3 with graded granite stone aggregate (12 mm nominal size), wall made of brick masonry using 1st class bricks having crushing strength between 100 to 149 kg/cm² in cement mortar 1:4 inside plastering 12 mm thick 1:4 finished smooth with neat cement, pinning, outside plaster 1:4 and making channels with cement concrete 1:2:4 graded granite stone aggregate (12 mm nominal size) complete with including Plastic Encapsulated M.S. foot Rest staggered at 0.375 mtr interval, including excavation, reinforcement. 30 1200mm internal dia., 3.30m deep 31 1500mm internal dia., 4.95m deep 32 Extra for every additional depth of 1 m or part there of in following size of circular manholes. 33 1200mm internal dia., 3.30m deep 34 1500mm internal dia., 4.95m deep 35 Dismantling/Cutting of Cement Concrete road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materialsas per direction of Engineer Incharge. 36 Reinstatement of Concrete road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials as per direction of Engineer Incharge. 37 Providing and erecting temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes hiring of Ballies and arrangement for traffic diversion such as traffic signals during construction at site as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). The rate is for unit length of pipe laying. 38 Disposal of Surplus Earth as per direction of Engineer Incharge. 39 Construction of Boundary Wall 2.0m ht. above plinth level 0.23m width with RCC Column @3m c/c with plinth beam and foundation avg. 2 m depth including reinforcement and RCC coping on top of wall with plaster (1:4) and painting (apex painting 3 coat) as per type design and drawing at the STP site 40 MS gate (3.6m wide with 1.50m wicket gate with 0.35 m x0.35m RCC piller) 41 Cnstruction of Intermediate Pumping Station (IPS) as per specification, accesory building & design approved by Engineer in Charge 42 Sewage Rising main from IPS Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as per direction of Engineer Incharge. 43 0.0 to 1.5 mtr. Depth (do - in all kindes of soil) 44 Supply of 400mm dia. DI K9 pipe and special for the pumping mains including all complete pipes conforming to IS : 8329- 400 mm 45 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.(400mm) 46 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete 150 mm 47 Carting of 400mm dia DI K9 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. 48 Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, withcast insitu RCCslab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing 49 Sluice valve, Air valve chambers 50 Dismantling/cutting of the BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 51 Reinstatement of the BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 52 Interception and diversion (I&D) Structure works 53 Cnstruction of Interception and Diversion Structure works as per specification, accesory building & design approved by Engineer in Charge 54 Treated Effluent line (400mm Dia DI K7) (STP to Disposal point (Khow river) 55 Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.0.0 to 1.5 mtr. Depth do - in all kindes of soil 56 Supply of 400mm dia. DI K7 pipe and special for the pumping mains including all complete Pipes conforming to IS : 8329- 400 mm 57 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.all complete required for completion of work (400mm dia) 58 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. all complete required for completion of work150 mm 59 Carting of 400mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. 60 Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, withcast insitu RCCslab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. 61 Sluice valve, Air valve chambers 62 Dismantling/cutting of BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 63 Reinstatement of BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 64 E/M WORKS 65 STP ( 7.2 MLD ) And Co Treat ment Plant ( 7 KLD ) 66 A. Design, Supply of all Materials, Erection, Testing,Commissioning and 3 month trial run Of Electrical, Mechanical & Instrumentation Equipments at STP (7.2 MLD )with all required electrical& mechanical works, PLC/SCADA work, electrification & street lighting work and Online Continuous Effluent Monitoring System (OCEMS) etc. all complete as per tender documentfor STP.The effluent quality for agricultural uses ( PH-6.5 TO 8.3,SS-30 mg/l, Oil & Greases -10mg/l, BOD- 10mg/l,COD-30 mg/l,Residual Chlorine-nil, TKN-10mg/l, Nitrate-10mg/l, FC-230MPN/100ml Dissolved P-5mg/l (preferable 2mg/l).) shall be maintained as per CPHEEO mannuals Latest NGT norms for effluent discharge shall be adhered. The rate is Considered for SBR Technology. The STP shall be capable to treat the raw sewage having minimum concentrationmentiond in CPHEEO mannual. Firm has to complete Design, Supply, Erection, Testing,Commissioning and 3 month trial run of Substation Work like HT Panel, Transformer & its associated equipments and DG Set Work with AMF Panelwith considering load of STP and MPS both.B. Design, Supply of all Materials, Erection and Commissioning and 3 month Trial Run of Co-Treatment Plant ( 7 KLD ) having manual screen with-SS 304 with bar size (50 mm x 10mm) and gaping 20 mm, Screw Pumps (2 Kl/h 1W+1S), Screw Press Machine (3 KL/H) with double cylinder having VFD for its operation , 1000 Lit. PVC tank for washing screw press machine. all type pipe and fittings, LT panel and cabling material,Dewatering Pumps (1W+ 1S), 2HP Blower with 6 Nos Diffusers etc complete. including Supply and 3 month trial run of 1 No. 1500 Lit. Cesspool Vehicle having 30 HP Reputed make Tractor (with Registration Certificate and insurance papers) 67 E./M. Works at MPS 68 Electrical Works 69 H.T.Panel( Comprising with 1 -I/C and 2 -O/G. (panels should be TYPE TESTED ASSEMBLY ( TTA) type only) 70 SITC of Indoor Type Floor mounted HT Panel with11 KV, 630/800 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- 71 Supply installation testing and commissioning of Incoming Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturers own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. (1set, included in STP costing) 72 Supply Installation Testing and Commissioning Outgoing Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturers own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) (2 sets, included in STP costing) 73 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. (included in STP costing)3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) -60 metersTrench making and covering of trench in all respect.- 60 metersSITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) - 4 sets11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down Voltage 45 KV - 2.5 SqmTransformer:Suitable capacitywith Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of suitable capacity rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. (included in STP costing) -- 2 Nos. 74 L.T. Panel (panels should be TYPE TESTED ASSEMBLY ( TTA) type only)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operatedon 415 ± 6 %volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming ACB panels and 1 outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii)C.Ts of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v)Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)Frequency meter-1 No.(vii)KWH meter - 1 No. (viii)2 Pole over current relay& one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 6 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 63 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 3 Nos. outgoing panels for miscellaneousworks, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incoming - 1 NO (G) Bus coupler arrangement in panels 75 LT Cable laying and jointing 76 Power and control cable-Supply of 185 sq. mm 3.5 core cable - 2 Run required for power fromeach Transformer to each L.T. panel , 50 sq. mm X3 core-1 run cable for power from starters to Motor including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation systemetc. complete in all respect. 77 Earthing 78 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. 79 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. 80 Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) 81 Charges of Electrical safety Clearance 82 Expenditure on B&L Form, Challan etc. 83 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing AMRUT Work Aligarh Sewarage) 84 STARTER PANEL 85 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 20 HP motor (To be fixed in composite panel of LT Panel) 86 Mechanical Works 87 PumpThesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 20 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (4W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 3110 lpmTotal Head= 16 M or as per designSpeed=980Quantity of pumps. 88 Guid Rail System 89 Guide rail system (Automatic coupling system) for 20 HP submersible pump setscomplete for above pump set.(6 Sets, included in item no. 51.01) 90 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (6 Sets, included in item no. 51.01) 91 Main piping and Valves.Main piping and valves 200 mm dia delivery, 350 mm diacommon header line. 92 Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable water 93 Material of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS 94 Motor Operated Sluice Valves 95 Sluice Valve 200 mm dia 96 Sluice Valve 350 mm dia 97 Reflux Valve 98 Reflux valve 200 mm dia N.B. 99 PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing taking 200mm pipe 60m and 350 mm pipe 15m . 100 200 mm, K9 delivery pipes for all six pumping plant 101 350 mm, K9 common header pipes 102 Specials like bend, tee, D Joint etc. 103 Nut Bolt, Washer Rubber packing etc 104 INSTALLATION, TESTING & COMMISSIONING 105 Installation & Commissioning of all 6 Nos. Pump set,Piping & Valves as mentioned in above. 106 Level Transmitter (For Hi-Lo cut-off & alarms) 107 SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. 108 Electro magnetic flow meter 109 SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 350 mm dia main header line. 110 E.O.T. Crane 111 SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. 112 Chequerred plate and guards 113 SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. 114 PAINTING 115 Painting of all pumps piping and valves with two coat enamel paint. 116 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR, 2019) 117 Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 118 Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan 119 IPS Campus with Solar Panel and LED Light of 3 sets. 120 D.G. SET AND ACCESSORIES 121 SITC of Radiator Cooled and Turbo charged Silent type suitable capacity DG set , engine ,alternator capable of developingat 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. (1 set, included in stp costing) 122 SITC of PLC Based Auto main failure (AMF) Panel forDG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect.(1 Set, included in stp costing) 123 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required.(2 Job, included in stp costing) 124 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. (2 Jobincluded in stp costing) 125 Supply & Laying 50 mm X 6mm sizeGI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. (1 Job, included in stp costing) 126 Providing and Laying cable for DG Set to Panel ( armored aluminium )-(1 Job, included in stp costing) 127 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 185 sq mm. (4 Jobs, included in stp costing) 128 SCREENS AND GATES: 129 Rising type thimble mounted CI Sluice Gates of reputed make at IPS 130 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at mid year peak discharge (1w+ 1s) 131 Packing and Frieght 132 Installation, Testing and Commissioning 133 AUTOMATION OF MPS 134 CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. 135 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 136 CE/UL certified intellignet Smart Energy Meter 137 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1) 138 160 AMP rating 139 Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. 140 CE/UL Certified Surge protector for control panel. 141 CE/UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters. 142 Security Survillance IP Camera with recorder 143 Installation, commissiong & testing of above automation work 144 Expenditure on Operation & Maintenance of MPS including automation, Diesel Consumption & Electricity Consuption During 3 month Trial and Run Period 145 E./M. Works at IPS Dhampur 146 Electrical Works 147 H.T.Panel( Comprising with 1 -I/C and 2 -O/G .(panels should be TYPE TESTED ASSEMBLY ( TTA) type only)SITC of Indoor Type Floor mounted HT Panel with11 KV, 630/800 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- 148 Supply installation testing and commissioning of Incoming Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturers own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. 149 Supply Installation Testing and Commissioning Outgoing Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturers own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) 150 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. 151 3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) 152 SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) 153 11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV 154 Transformer: 315 KVA with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of 315 KVA rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. 155 L.T. Panel (panels should be TYPE TESTED ASSEMBLY ( TTA) type only) 156 SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operatedon 415 ± 6 %volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming ACB panels and 1 No outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii)C.Ts of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v)Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)Frequency meter-1 No.(vii)KWH meter - 1 No. (viii)2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 3 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 400 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 2 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 100 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (E) 3 Nos. outgoing panels for miscellaneousworks, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (F)APFC Panel for total load.(G) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incoming - 1 NO (G) Bus coupler arrangement in panels 157 LT Cable laying and jointing 158 Power and control cable-Supply of 240 sq. mm 3.5 core cable - 2 Run required for power fromeach Transformer to each L.T. panel , 240 sq. mm X3 core-1 run cable for power from starters to 67 KW Motors & 35 sq. mm X3 core-1 run cable for power from starters to 15 KW Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation systemetc. complete in all respect. 159 Earthing 160 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. 161 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. 162 Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) 163 Charges of Electrical safety Clearance 164 Expenditure on B&L Form, Challan etc. 165 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing AMRUT Work Aligarh Sewarage) 166 STARTER PANEL 167 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 90 HP motor (To be fixed in composite panel of LT Panel) 168 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 20 HP motor (To be fixed in composite panel of LT Panel) 169 Mechanical Works 170 Large PumpsThesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 90 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+1S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 5750 lpmTotal Head= 40 M or as per designSpeed=980Quantity of pumps. 171 Guid Rail System 172 Guide rail system (Automatic coupling system) for 90 HP submersible pump setscomplete for above pump set.(3 Sets, included in item no. 94.01) 173 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (3 Sets, included in item no. 94.01) 174 Small Pumps 175 Thesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 20 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (1W+1S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump=2500 lpmTotal Head= 17 MSpeed=980Quantity of pumps. 176 Guid Rail System 177 Guide rail system (Automatic coupling system) for 20 HP submersible pump setscomplete for above pump set. (2 Sets, included in item no. 98.01) 178 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (2 Sets, included in item no.98.01) 179 Main piping and Valves. 180 200 mm dia delivery for small pumps and250 mm dia delivery for large pumps, 350 mm diacommon header line. 181 Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable water 182 Material of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS 183 Motor Operated Sluice Valves 184 Sluice Valve 200 mm dia 185 Sluice Valve 250 mm dia 186 Sluice Valve 350 mm dia 187 Reflux Valve 188 Reflux valve 200 mm dia N.B. 189 Reflux valve 250 mm dia N.B. 190 PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing . 191 200 mm, K9 delivery pipes for small pumping plants 192 250 mm, K9 delivery pipes for large pumping plants 193 350 mm, K9 common header pipes 194 Specials like bend, tee, D Joint etc. 195 Nut Bolt, Washer Rubber packing etc 196 INSTALLATION, TESTING & COMMISSIONING 197 Installation & Commissioning of allPump set,Piping & Valves as mentioned in above @5% of supplied items. 198 Level Transmitter (For Hi-Lo cut-off & alarms) 199 SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. 200 Electro magnetic flow meter 201 SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 350 mm dia main header line. 202 E.O.T. Crane 203 SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. 204 Chequerred plate and guards 205 SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition(3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. 206 PAINTING 207 Painting of all pumps piping and valves with two coat enamel paint. 208 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR, 2019) 209 Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 210 Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan 211 IPS Campus with Solar Panel and LED Light of 3 sets. 212 D.G. SET AND ACCESSORIES 213 SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 250 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. 214 SITC of PLC Based Auto main failure (AMF) Panel for 250 KVA DG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect. 215 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. 216 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. 217 Supply & Laying 50 mm X 6mm sizeGI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. 218 Providing and Laying cable for DG Set to Panel 240 sq mm X 3.5 core x 2 run( armored aluminium ). 219 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 240 sq mm. 220 SCREENS AND GATES: 221 Rising type thimble mounted CI Sluice Gates of reputed make at IPS 222 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at peak load of full discharge (working) 223 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at peak load of full discharge( standby) 224 Packing and Frieght 225 Installation, Testing and Commissioning 226 AUTOMATION OF IPS 227 CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. 228 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 229 CE/UL certified intellignet Smart Energy Meter 230 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1) 231 160 AMP rating 232 Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. 233 CE/UL Certified Surge protector for control panel. 234 CE/UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 235 Security Survillance IP Camera with recorder 236 Installation, commissiong & testing of above automation work 237 3 month trial run of automation work 238 Expenditure on Operation & Maintenance of IPS during 3 month Trial and Run Period 239 Expenditure onDiesel Consumption of IPS during 3 month Trial and Run Period 240 Expenditure on Electricity Consuption of STP, MPS & IPS as per actual UPPCL bill during 3 month Trial and Run Period
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
Uttar Pradesh View Result →
43.
Rural Development #10501963 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Khed Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
44.
Rural Development #10501960 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Sawali ( S ) Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Sawali ( S ) Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
45.
Rural Development #10501956 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Ghonsara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Ghonsara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
46.
Rural Development #10501838 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Satara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 / Yavat_Satara Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Satara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 / Yavat_Satara , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
47.
Housing Urban and Rular Development #10478642 Price Bid
Procurement Of Electrical Materials And Rewinding Of Motors Etc. To Maintain, Operation And Upkeepment Of Diu Water Supply Scheme In Diu District For The Year 2023-2024-Providing Open Well Horizontal Mono Block Pump Set With Cast Iron Body, Complete For Three Phase Submersible Motor Having For 3 Hp 3 Phase Open Well Horizontal Mono Block Pump Set Suitable For 85 Lpm To 270 Lpm @ 11 Mtr To 33 Mtr Head Suitable For 50 / 65 Mm Dia Delivery Pipe Cat.Ii ( Make: Duke / Kirloskar / Crompton ) As Directed By Engineer-In-Charge. 3 Providing Open Well Horizontal Mono Block Pump Set With Cast Iron Body, Complete For Three Phase Submersible Motor Having For 5 Hp 3 Phase Open Well Horizontal Mono Block Pump Set Suitable For 1350 Lpm To 310 Lpm @ 10 To 42 Mtr Head Suitable For 50 / 65 Mm Dia Delivery Pipe Cat.Ii ( Make: Duke / Kirloskar / Crompton ) As Directed By Engineer-In-Charge. 4 Providing Open Well Horizontal Mono Block Pump Set With Cast Iron Body, Complete For Three Phase Submersible Motor Having For7.5 Hp 3 Phase Open Well Horizontal Mono Block Pump Set Suitable For 1550 Lpm To 370 Lpm @ 13.5 Mtr To 42 Mtr Head Suitable For 65 / 75 Mm Dia Delivery Pipe Cat.Ii ( Make: Duke / Kirloskar / Crompton ) As Directed By Engineer-In-Charge. 5 Providing Open Well Horizontal Mono Block Pump Set With Cast Iron Body, Complete For Three Phase Submersible Motor Having For 25 Hp 3 Phase Open Well Horizontal Mono Block Pump Set Suitable For 1850 Lpm To 1075 Lpm @ 36 To 60 Mtr Head Suitable For 65 / 80 Mm Dia Delivery Pipe Cat.Ii ( Make: Duke / Kirloskar / Crompton ) As Directed By Engineer-In-Charge. 6 Providing Open Well Horizontal Mono Block Pump Set With Cast Iron Body, Complete For Three Phase Submersible Motor Having For 30 Hp 3 Phase Open Well Horizontal Mono Block Pump Set Suitable For 2450 Lpm To 1575 Lpm @ 40 To 51 Mtr Head Suitable For 80 / 100 Mm Dia Delivery Pipe Cat.Ii ( Make: Duke / Kirloskar / Crompton ) As Directed By Engineer-In-Charge. 7 Supplying Submersible Pump Set For Bore Of 150 Mm. Dia. Or More Having 3 Phase Motor Capacity About 20 H.P And Discharge Capacity Having ( 8 Stage ) 1000 To 900 Lpm Discharge At Head 59 To 64 Mtrs Suitable For 80Mm Dia. Delivery Pipe Cat.Iii ( Make: Kirloskar, Ksb, Duke ) As Directed By Engineer-In-Charge. 8 Supplying Submersible Pump Set For Bore Of 200 Mm. Dia. Or More Having 3 Phase Motor Capacity About35 H.P Discharge Capacity Having ( 6 Stage ) 1600 To 1150 L.P.M. Discharge At The Head 72 To 102 Mtrs. Suitable For 100 Mm Dia. Delivery Pipe Cat.Iii ( Make: Kirloskar, Ksb, Duke ) As Directed By Engineer-In-Charge. 9 Providing And Erecting Approved Make Three Pole Moulded Case Circuit Breaker Having Breaking Capacity / Strength Icu Of 35 K.A. At 415 V. Having Normal Current Rating 125A. With Fixed Thermal & Magnetic Release Suitable To Work On A.C. Supply 50 C / S. With All Internal Connections, Spreader Tinned Copper & Complete Erected In Existing 16 G.M.S. Housing. Ics=100% Of Icu Only Cat.Iii As Directed By Engineer-In-Charge. 10 Providing Approved Make Three Pole Moulded Case Circuit Breaker Having Breaking Capacity / Strength Icu Of 50 K.A. At 415V. Having Normal Current Rating Up To 250A. With Variable Thermal & Magnetic Release Suitable To Work On A.C. Supply 50 C / S. Ics = 100% Of Icu Only Cat.Iii As Directed By Engineer-In-Charge. 11 Provding Approved Make Three Pole Moulded Case Circuit Breaker Having Breaking Capacity / Strength Icu Of 50 K.A. At 415 V Having Normal Current Rating Up To 400A. With Variable Thermal & Magnetic Release Suitable To Work On A.C. Supply 50 C / S. With All Internal Connections & Complete Erected In Existing 16 G.M.S. Housing. Ics=100% Of Icu Only Cat.Iii As Directed By Engineer-In-Charge. 12 Supplying Electrical Insulation L.T. Tape Role With Isi Marked Having Nominal Width 1.8 Cms Nominal Length 9.0 Mtr Nominal Thickness 0.125 Mm And Having Self Adhesive Pvc. As Directed By Engineer-In-Charge. 13 Solderless Crimping Type Aluminium Lugs Conforming To Is Suitable For Cable Of Following Size Evenly Crimped With High Pressure Tool & Connected To Switchgear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manner. As Directed By Engineer-In-Charge. 16 Sq.Mm. 14 25 Sq.Mm. 15 35 Sq.Mm. 16 50 Sq.Mm. 17 70 Sq.Mm. 18 120 Sq.Mm. 19 150 Sq.Mm. 20 185 Sq.Mm. 21 225 Sq.Mm. 22 300 Sq.Mm. 23 Solderless Crimping Type Copper Lugs Conforming To Is Suitable For Cable Of Following Size Evenly Crimped With High Pressure Tool & Connected To Switchgear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manner, As Directed By Engineer-In-Charge. 6 Sq.Mm 24 10 Sq.Mm 25 16 Sq.Mm. 26 25 Sq.Mm. 27 35 Sq.Mm. 28 50 Sq.Mm. 29 70 Sq.Mm. 30 120 Sq.Mm. 31 Add Cost Of Leak Proof Complete Welding Surrounding Pipe And Coupling For Use As Column Pipe For Following Size As Directed By Engineer-In-Charge. 50Mm, 65Mm 32 80Mm, 100Mm, 125Mm 33 Cutting The Heavy Duty Pipe And Threading One End Of Pipe With 8 Tpi / 11 Tpi As Per Requirement And Including To And Fro Charges. As Directed By Engineer-In-Charge. 50Mm ( 2 ) Dia Pipe 34 65Mm ( 2.1 / 2 ) Dia Pipe 35 80Mm ( 3 ) Dia Pipe 36 100Mm ( 4 ) Dia Pipe 37 125Mm ( 5 ) Dia Pipe 38 Providing Isi Marked Pvc Insulated Pvc Sheathed Flat Flexible Submersible Copper Cable Approved Make Of Following Size As Directed By Engineer-In-Charge. 3 Core X 1.5 Sq. Mm. 39 3 Core X 2.5 Sq. Mm. 40 3 Core X 6 Sq. Mm. 41 Making Trench In Soft Soil Of Suitable Width Of 90 Cms Deep For Laying Cable Or Locating The Faultall Over The Run And Backfilling The Same And Making The Surface As Normal Ground. As Directed By Engineer-In-Charge. 42 Making Trench In Hard Murrum / Tar Road Of Suitable Width Of 90 Cms Or Requireddepth For Laying Any Size Of Cable Or Locating The Faultall Over The Run And Back Filling The Same And Making The Surface As Normal Ground. As Directed By Engineer-In-Charge. 43 Add If Additional Machineries Like Hammer Driller Or Jcb Use [ Add ] As Directed By Engineer-In-Charge. 44 Supplying & Erecting Funnel Type Earthing Having Earth Plate Of Following Size Burred In Specifically Prepared Earth Pit 3 Mtr. Below Ground With 40 Kg. Charcoal And Salt With Alternate Layers Of Charcoal & Salt, 20Mm Dia. G.I. Pipe With Funnel With A Wire Mesh For Watering & Bricks Masonry Block, C.I. Cover Complete As Per Para 7.3 Of Is 3043 With Necessary Length Of Double Galvanised Iron / Copper Earth Wire No 6 Swg Bolted With Lug To The Plate And Covered In 12Mm Dia. G.I. Pipe 2.5 Mtr Long Complete Connected To The Nearest Switch Gear With End Socket As Per Direction & Duly Tested By Earth Tester Confirming To Is ( As Per Drawing ) With Following Specification With 45 X 45 X 0.35 Cms. C.I. Earth Plate. As Directed By Engineer-In-Charge. 45 Supplying & Erecting Earth Pit Of Minimum Bore Dia. 150Mm Size Approved Make Earthing Electrode Consisting Pipe-In-Pipe Technology As Per Is 3043-1987 Made Of Corrosion Free G.I. Pipes Having Outer Pipe Dia Of 50Mm Having 80-200 Micron Galvanising, Inner Pipe Dia Of 25 Mm Having 200-250 Micron Galvanising, Connection Terminal Dia Of 12Mm With Constant Ohmic Value Surrounded By Highly Conductive Compound With High Charge Dissipation Suitable For Following Type Of Applications. For Electrical Installation Up To 11 Kv In Normal Soil. Length Of Pipe: 2.00 Mtrs Back Filling Compound: 1 No. Bag Of 25 Kg. As Directed By Engineer-In-Charge. 46 Rewinding Of Any Fan By Using Supper Enamelled Copper Wire And Over Hauling And Putting In Working Order With Original Speed With Guarantee For One Year Including Credit Of D.M. Retained By Agency, As Directed By Engineer-In-Charge. 47 Replacing Burnout Unserviceable Ball Bearing / Roller Bearing Suitable For Following Motors For Mono Block Pump Sets For 1 H.P. Motor / Pump. As Directed By Engineer-In-Charge. 48 Opening The Open Well Sub. Monopump Set For Fault Finding, Carry Out Required Repairs Refitting The Same With Necessary Oiling, Greasing & Overhauling & Making Pump Set In Good Working Condition. ( Excludes Cost Of Repairing. Includes To & From Transportation ) As Directed By Engineer-In-Charge. 1 Hp To 5 Hp. 49 7.5 Hp To 15 Hp. 50 20 Hp To 35 Hp. 51 Rewinding Of 230V Single Phase Motor As Per Original Winding Design By Using Super Enamelled Copper Wire And Putting The Same In Working Condition As Per Original Up To 0.5 Hp. As Directed By Engineer-In-Charge. 52 Rewinding Of 230V Single Phase Motor As Per Original Winding Design By Using Super Enamelled Copper Wire And Putting The Same In Working Condition As Per Original Up To 1.0 Hp. As Directed By Engineer-In-Charge. 53 Rewinding Of 3 H.P., 3 Phase 440V Motor As Per Original Winding Design By Using Super Enamelled Copper Wire And Putting The Same In Working Condition As Per Original. As Directed By Engineer-In-Charge. 54 Rewinding Of 5 H.P., 3 Phase 440V Motor As Per Original Winding Design By Using Super Enamelled Copper Wire And Putting The Same In Working Condition As Per Original. As Directed By Engineer-In-Charge. 55 Rewinding Single Phase 230V Motor For Open Well Horizontal Mono Pump Set By Using Polycab Copper Winding Wire & Putting The Same In Working Order For Pump Capacity Of 0.5 Hp - 230V. As Directed By Engineer-In-Charge. 56 Rewinding Single Phase 230V Motor For Open Well Horizontal Mono Pump Set By Using Polycab Copper Winding Wire & Putting The Same In Working Order For Pump Capacity Of 1 Hp - 230V. As Directed By Engineer-In-Charge. 57 Replacement Of Gun Metal / Bronze Bushing For Open Well Horizontal Submersible Pump Set 7.5 Hp To 15 Hp. As Directed By Engineer-In-Charge. 58 Replacement Of Gun Metal / Bronze Bushing For Open Well Horizontal Submersible Pump Set Above 15 Hp. As Directed By Engineer-In-Charge. 59 Replacing Gasket, Oil, Nuts, Bolts & Washers For Open Well Horizontal Submersible Pump Sets 7.5 Hp To 15 Hp. As Directed By Engineer-In-Charge. 60 Replacing Gasket, Oil, Nuts, Bolts & Washers For Open Well Horizontal Submersible Pump Sets Above 15 Hp. As Directed By Engineer-In-Charge. 61 Replacement Of Bronze / Carbon Thrust Bearing With Fibber Plate & Bushing Suitable For Open Well Horizontal Submersible Pump Set For 7.5 Hp To 15 Hp. As Directed By Engineer-In-Charge. 62 Replacement Of Bronze / Carbon Thrust Bearing With Fibber Plate & Bushing Suitable For Open Well Horizontal Submersible Pump Set For Above 15 Hp. 63 Replacement Of Cast Iron Impeller For Openwell Horizontal Submersible Pump Sets 7.5 Hp To 15 Hp. As Directed By Engineer-In-Charge. 64 Replacement Of Cast Iron Impeller For Openwell Horizontal Submersible Pump Sets Above 15 Hp. As Directed By Engineer-In-Charge. 65 Replacement Of Bronze / Gunmetal Impeller For Open Well Horizontal Submersible Pump Set 7.5 Hp To 15 Hp. As Directed By Engineer-In-Charge. 66 Replacement Of Bronze / Gunmetal Impeller For Open Well Horizontal Submersible Pump Set Above 15 Hp. As Directed By Engineer-In-Charge. 67 Opening The Submersible Pump Set For Fault Finding, Carry Out Required Repairs Refitting The Same With Necessary Oiling, Greasing & Overhauling & Making Pump Set In Good Working Condition. ( Excludes Cost Of Repairing. Includes To & From Transportation ) As Directed By Engineer-In-Charge. 1 Hp To 5 Hp. 68 7.5 Hp To 15 Hp. 69 20 Hp To 35 Hp. 70 Replacement Of Bronze / Carbon Thrust Bearing With Fibre Plate & Housing For 150 Mm Dia. 71 Replacement Of Bronze / Carbon Thrust Bearing With Fibre Plate & Housing For 200 Mm Dia. 72 Replacement Of Motor Bush, Upper / Lower With Sleeve With Following Material Bronze 150Mm Dia. 73 Replacement Of Motor Bush, Upper / Lower With Sleeve With Following Material Bronze 200Mm Dia. 74 Replacement Of Motor Bush, Upper / Lower With Sleeve With Following Material Rubber 150Mm Dia. 75 Replacement Of Motor Bush, Upper / Lower With Sleeve With Following Material Rubber 200Mm Dia. 76 Replacement Of Bronze Impeller With Neck Ring 150Mm Dia. 77 Replacement Of Bronze Impeller With Neck Ring 200Mm Dia. 78 Replacement Of Bowl Bearing / Bush Rubber 150Mm Dia. 79 Replacement Of Bowl Bearing / Bush Rubber 200Mm Dia. 80 Rewinding 3 Phase, 440V Motor For Open Well Horizontal Mono Pump Set By Using Polycap Copper Winding Wire & Putting The Same In Working Order For Pump Capacity Of 5 Hp - 440V 81 7.5 Hp - 440V 82 10 Hp - 440V 83 12.5 Hp - 440V 84 15 Hp - 440V 85 20 Hp - 440V 86 25 Hp - 440V 87 30 Hp - 440V 88 Rewinding Of Submersible Motor By Using Approved Make Pvc Insulated Copper Winding Cores Of Suitable Size Complete With Connection. Capacity Suitable For Pump Of Following Size. Dismantled Materials To Be Retained By Agency. 5 Hp. 89 7.5 H.P. 90 10 To 15 H.P. 91 16 To 20 H.P. 92 21 To 25 H.P. 93 26 To To 35 H.P. 94 46 To 54 H.P. 95 55 To 75 H.P. 96 Transformer Oil Having Good Resistance To High Electrical Stress, High Di-Electric Strength ( 50Kv ) Low Viscosity, Low Pour Point, High Flash Point And Excellent Thermal Properties For Efficient Heat Transfer And Cooling As Per I.S.335 -1972. As Directed By Engineer-In-Charge. 97 Providing Xlpe ( Is:7098 ) ( I ) -88 Isi Armoured Cable Multistrand Aluminium Conductor For 1.1 Kv. To Be Laidon Wall With Necessary Clamps Or In Existing Trench / Pipe Of Following Size Of Cables As Directed By Engineer-In-Charge. 3 1 / 2 Core 25 Sq. Mm ( 16 Sq. Mm 1 / 2 Core ) 98 3 1 / 2 Core 50 Sq. Mm ( 25 Sq.1 / 2 Mm Core ) 99 3 1 / 2 Core 70 Sq. Mm ( 35 Sq. Mm 1 / 2 Core ) 100 3 1 / 2 Core 120 Sq. Mm ( 70 Sq. Mm 1 / 2 Core ) 101 3 1 / 2 Core 150 Sq. Mm ( 70 Sq. Mm 1 / 2 Core ) 102 Disconnecting The Cable Connection And Providing Straight Joint With Pvc Mould Using Heat Shrink / Cast Resin Type Epoxy Compound Insulating Material And Making The Joint Complete Using Necessary In Line Connectors, Hardener, Earth Continuity Connection, Spacers Etc. And Reconnecting The Same & Ensure The Joint Resistance Within The Limits As Per Is. As Directed By Engineer-In-Charge. 10 To 25 Sq. Mm Cable. 103 35 To 95 Sq. Mm Cable. 104 120 To 300 Sq. Mm Cable. 105 Providing L&T Make Three Phase & Neutral Lt Heavy Duty Switch Disconnector Fuse Unit Cubical Type For Panel Mounting Complete With Operating Mechanism Suitable To Operate On 415V A.C., 23A Duty With Hrc Fuses Of Suitable Load Confirming To Is. 13947 ( Part I & Iii ) . Of Following Capacities. As Directed By Engineer-In-Charge. 63 Amp Cat. Iii 106 125 Amp Cat. Iii 107 250 Amp Cat. Iii 108 400 Amp Cat. Iii 109 Providing 415 V Mcb Three Pole For Motor & Inductive Load ( C Curve ) Having 10Ka Breaking Capacity & Confirms To Is: 8828 In Existing Box Having Following Capacity 40 Amp. Cat. Iii As Per Approved Make As Directed By Engineer-In-Charge. 110 Providing 415 V Mcb Three Pole For Motor & Inductive Load ( C Curve ) Having 10Ka Breaking Capacity & Confirms To Is :8828 In Existing Box Having Following Capacity 63 Amp. Cat. Iii As Per Approved Make As Directed By Engineer-In-Charge. 111 Providing Four Pole Miniature Isolator A.C. 22 Duty Confirms To Is 13947-3 In Existing Box For 40 Amp Cat. Iii As Per Approved Make As Directed By Engineer-In-Charge. 112 Providing Four Pole Miniature Isolator A.C. 22 Duty Confirms To Is 13947-3 In Existing Box For 63 Amp Cat. Iii As Per Approved Make As Directed By Engineer-In-Charge. 113 Providing Four Pole Miniature Isolator A.C. 22 Duty Confirms To Is 13947-3 In Existing Box For 100 Amp Cat. Iii 114 Providing Ac-3 Duty 3 Pole Power Contactor With 2 No & 2 Nc Aux Contacts Complete With 220V / 240V / 415V Operating Coil Suitable For 70A Rating ( L&T Make ) . 115 Providing Ac-3 Duty 3 Pole Power Contactor With 2 No & 2 Nc Aux Contacts Complete With 220V / 240V / 415V Operating Coil Suitable For 95A Rating ( L&T Make ) . 116 Providing Ac-3 Duty 3 Pole Power Contactors Spare Kits For 70A Rating ( L & T Make ) . 117 Providing Ac-3 Duty 3 Pole Power Contactors Spare Kits For 80 / 95A Rating ( L&T Make ) . 118 Providing Ac-3 Duty 3 Pole Power Contactor Thermal Over Load Relay For 80 To 110 Amp. ( L&T Make ) 119 Providing Operating Coil For Power Contactors For 70A / 110A ( L&T Make ) 120 Providing Fresh Air Fan 250 Mm Dia With Square Frame Make Of Abs Body With Louvers Cat. Ii As Per Approved Make As Directed By Engineer-In-Charge. 121 Supplying Led Lamps With Following Wattage Capacity Of 220 To 240 Voltage, Minimum 15000 Burning Hours Life, 500 V In Built-Surge Protection, Polycarbonate Diffuser, Mounting Suitable For E14 / E27 / B22 Lamp Holders, Pf >= 0.5 Led Lamps Integral Type, With Pc Diffuser Suitable Lamp Holder 5 To 8 Watts Cat. Iii Make: Wipro, Crompton, Philips, Bajaj, Osram As Directed By Engineer-In-Charge. 122 Supplying Led Lamps With Following Wattage Capacity Of 220 To 240 Voltage, Minimum 15000 Burning Hours Life, 500 V In Built-Surge Protection, Polycarbonate Diffuser, Mounting Suitable For E14 / E27 / B22 Lamp Holders, Pf >= 0.5 Led Lamps Integral Type, With Pc Diffuser Suitable Lamp Holder 16 To 20 Watts Cat. Iii Make: Wipro, Crompton, Philips, Bajaj, Osram As Directed By Engineer-In-Charge. 123 Supplying Led Indoor Fittings With Leds Of Wattage 0.2 Watt To 0.5 Watt Assembled On Single Mcpcb, With Housing Used As A Heat Sink Shall Be Made Of Thick Sheet Steel Conforming To Is: 513 / Crca / Aluminium Die Cast Powder Coated And High U.V. & Corrosion Resistance With Diffuser With Company Mark / Name 160V To 270V, Power Factor More Than 0.9, Thd < 15%, Cct 3000K To 6500K, Luminaire Efficacy> 85 Lumens / Watt Led, Led Driver Efficiency > 85 % ( Fitting Required Lm-79 & Lm-80 Certificates ) ( Note: Below Description Have Shown Ranges Of Wattage Capacity & Make Of Led Fittings. The Engineer In Charge May Select Any Wattage Capacity Between The Ranges Shown. ) Tube Light With Integral Driver 22-24 Watts, Surge- 2Kv, Ip-20, Conventional 4 Feet Cat. Iii ( Make: Wipro, Crompton, Philips, Bajaj, Osram ) 124 36-40 Watts, Surge- 2Kv, Ip-20, Conventional 4 Feet Cat. Iii ( Make: Wipro, Crompton, Philips, Bajaj, Osram ) 125 Supplying Led Street Light / Flood Light Fittings With High Power White Leds Wattage Of 3 Watt And Above Assembled On Single Mcpcb, Efficiency More Than 130 Lm / W And Corrosion Free High Pressure Die Cast Aluminum Housing With Smooth Finish Powder Coated And Heat Sink Extruded Aluminium With Diffuser And Polycarbonate Optics / Lenses, With Toughened Glass With Company Mark / Name Engraved Or Embossed 160 To 270V, Power Factor More Than 0.95, Thd <10%, Cct 3000K To 5700K, Uniformity Ratio >0.45, Luminaire Efficacy> 100 Lumens / Watt. Led Driver Efficiency > 85%. ( Fittings Required Lm-79 & Lm-80 Certificates ) ( Note: Below Description Have Shown Ranges Of Wattage Capacity Of Led Fittings. The Engineer In Charge May Select Any Wattage Capacity Between The Ranges Shown. ) ( A ) Street Light ( Ip-65 ) , Surge Protection- 4Kv Integral And, Light Must Have 440Vac Line Supply With Over-Voltage Protection. ( Iii ) Above 60 To 90 Watts Cat. Iii ( Make: Wipro, Crompton, Philips, Bajaj, Osram ) 126 Providing & Supplying Of Tinned Type Alluminium In Line Connector Conforming To Is Suitable For Cable Of Following Size Evenly Crimped With High Pressure Tool & Connecteddowells Make As Directed By Engineer-In-Charge. ( Incl. Gst ) 16 Sq.Mm. 127 25 Sq.Mm. 128 35 Sq.Mm. 129 50 Sq.Mm. 130 70 Sq.Mm. 131 120 Sq.Mm. 132 Providing & Supplying Of Tinned Type Copper Tube Heavy Duty In Line Connector Conforming To Is Suitable For Cable Of Following Size Evenly Crimped With High Pressure Tool & Connecteddowells Make As Directed By Engineer-In-Charge. ( Incl. Gst ) 10 Sq.Mm. 133 16 Sq.Mm. 134 25 Sq.Mm. 135 35 Sq.Mm. 136 50 Sq.Mm. 137 70 Sq.Mm. 138 120 Sq.Mm. 139 Providing & Supplying Phase And Voltage Controller Having 3Ph - 3W, 145V Ac, 47 - 63 Hz, O / P: 5A ( Res. ) Make: Gic ( L&T ) As Directed By The Engineer-In-Charge. ( Inc. Gst ) 140 Providing & Supplying Angle Grinder, Type Of Product: Angle Grinder, Switch Type: Back Switch, No Load Speed: 1000 Rpm, Size: 125Mm, Input Power: 220-240V, Wattage: 1100W, Make: Jcb Model No: Jcb-Ag1100-Em / Makita As Directed By Engineer-In-Charge. ( Incl. Gst ) 141 Providing & Supplying Rotary Hammer Drill, Type Of Product: Rotary Hammer, No Load Speed: 1300 Rpm, Impact Energy: 2.8 J, Input Power: 240V, Wattage: 800W, Size: 26Mm, Make: Jcb Model No: Jcb-Rh800-Em / Makita As Directed By Engineer-In-Charge. ( Incl. Gst ) 142 Providing & Supplying Impact Drill Machine, Capacity: 13Mm, 710W Comes With A Power Supply Cord Of 2M, 3200 Rpm., Power Input Of 710 W., Drilling Capacity Of 13Mm In Steel, 30 Mm In Wood And 16 Mm In Concrete. Weight 2.1 Kg Make: Makita Model No. Hp1630 / Woolf / Black & Decker As Directed By Engineer-In-Charge. ( Incl. Gst ) 143 Providing & Supplying Grinder Machine Blade For Metal Cutting Including All Taxes, Gst, Insurance, Transportation, Freight Charges, Octroi, Inspection Charges, Loading, Unloading, Conveyance To Departmental Stores Stacking Etc. Complete. As Directed By Engineer-In-Charge. ( Incl. Gst ) 144 Providing & Supplying Metal Drill Bit Set Of 25 Hss High Speed Steel Drill Bit Drilling Head For Power Drill Tool ( Size : 2Mm To 13Mm ) Make: Jk / Taparia / Jhalani As Directed By Engineer-In-Charge. ( Incl. Gst ) 145 Providing & Supplying Masonary / Rcc Drill Bit Set Of 3Mm -10 Nos., 4Mm-10 Nos., 5Mm-10 Nos., 6Mm-10 Nos., 7Mm-05 Nos., For Rotary Hammer Drill Make: Jk / Taparia / Jhalani As Directed By Engineer-In-Charge. ( Incl. Gst ) 146 Providing & Supplying Grinder Machine Blade For Sanding, Rust Removal & Polishing Of Metal Including All Taxes, Gst, Transportation, Freight Charges, Octroi, Inspection Charges, Loading, Unloading, Conveyance To Departmental Stores Stacking Etc. Complete. As Directed By Engineer-In-Charge. ( Incl. Gst ) 147 Providing & Supplying Single Sided Hcs Hacksaw Blade, Material: Carbon Steel, Colour: Silver, Length: 12 Inch Long Including All Taxes, Gst, Insurance, Transportation, Freight Charges, Octroi, Inspection Charges, Loading, Unloading, Conveyance To Departmental Stores Stacking Etc. Complete. As Directed By Engineer-In-Charge. ( Incl. Gst ) 148 Providing & Supplying Voltage Monitoring Series Sm 175 Ordering Information, Compact 17.5 Mm Wide, Protects Against Phase Loss, Phase Reversal & Phase Asymmetry, Multi-Voltage: Three Phase Three Wire @ 208 - 480 Vac, Selectable Under Voltage / Over Voltage & Asymmetry, Led Indication For All Faults & For Change In Settings During Run Time For Better Security, Adjustable Time Delay, 1 C / O Configuration, 415Vac Make: Gic ( L&T ) Model No. Mg53bh As Directed By The Engineer-In-Charge. ( Incl. Gst ) 149 Providing & Supplying Water Level Controller Having Supply: 85-270V Ac / Dc, 50 / 60Hz, 3Va ( Max. ) 10A @ 250V Ac ( No ) Wlca2m1 Selec Make Or Equivalent As Directed By The Engineer-In-Charge. ( Incl. Gst ) 150 Providing & Supplying Auto Switch +, Efficiently Operate Submersible, Monoset Pumps, And Motors, Automate The Whole Switch On And Switch Off Process, Input Supply: 415V 50Hz, Output: N-V, S1-S2 Potential Free, Auto On Delay Time: 45-60 Seconds ( Pre-Setted ) , Make: Gelco Model: Wtf As Directed By The Engineer-In-Charge. ( Incl. Gst ) 151 Providing & Supplying Mini Wlg Liquid Level Controller Having Supply Voltage: 220 / 415 Vac, Output Contact Rating: 5Amp, 240 Vac, Sencing Element: Ss Prod, Output Contact: 1 No, Trip Time Delay: 4 To 7 Sec, Enclosure: Pvc Box, Make: Gelco / Ellico As Directed By Engineer-In-Charge. ( Incl. Gst ) 152 Providing & Supplying Relay Unit For Jmp Star Delta Starter Upto 25 Hp. ( Incl. Gst ) 153 Providing & Supplying Black Mrf ( Patch ) Cushion Repair Compound, Thickness: 2Mm, Size: 1.5 Kg As Directed By The Engineer In Charge. ( Incl. Gst ) 154 Providing & Supplying Of Bitumen Cotton Tape, Width: 19Mm, Length: 10 Mtr. Standard Make As Directed By The Engineer In Charge. ( Incl. Gst ) 155 Providing & Supplying M.S. Clamp Having 4 / 5 Ft. Length, Width 4 Inches, Thickness 10 / 12Mm, Nut Bolts 4 Inches With Double Side Washer, Middle Round Dia 400Mm As Per The Design And Directed By The Engineer In Charge. ( Inc. Gst ) 156 Providing & Supplying M.S. Clamp Having 3 / 4 Ft. Length, Width 3 Inches, Thickness 10 / 12Mm, Nut Bolts 4 Inches With Double Side Washer, Middle Round Dia 150 / 160Mm As Per The Design And Directed By The Engineer In Charge. ( Inc. Gst ) 157 Providing & Supplying M.S. Clamp Having 2 / 3 Ft. Length, Width 3 Inches, Thickness 10 / 12Mm, Nut Bolts 4 Inches With Double Side Washer, Middle Round Dia 65 / 80 / 100Mm As Per The Design And Directed By The Engineer In Charge. ( Inc. Gst )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Daman And Diu View Result →
48.
Health and Family Welfare #10445489 Price Bid
Supply Of Medical Equipments/Chemicals/Staionery Etc. Supply Of Medical Equipments/Chemicals/Staionery Etc. , List Of Lab Instruments/Chemiclas/Staionery Etc. , Horrocks Apparatus , A) Horrocks Black Cup , B)Horrocks White Cup , C)Test Tube Rack , Glass Beaker , Flask(100Ml) , Flask(250Ml) , Pestle$Mortar , Centrifuge , Chloroscope , Test Tube Holder , Stirrer , Bunsen Burner , Innoculating Loop , Spirit Lamp , Height Measuring Tape , Height Measuring Stand , Stediometer , Slide , Shakirs Tape , Bp Apparatus , Pulse Oximeter , Stethoscope , Glucometer With Strips , Lactometer , Filter Paper , Burette And Pipette , Incubator,Electric , Ice Lined Refrigerator(I.L.R) , Haemoglobinmeter , Sound Level Meter , Water Sampling Bottle From Any Depth , Needle Shredder , Vaccine Carrier , Craft Water Testing Kit , Iodine Teting Kit , Mosquito Catching Kit , Clinical Thermometer , First Aid Kit , Otoscope , Ophthal Moscope , Auto Refractometer With Keratometer , Operating Microscope , Ab Scan , Direct Ophthalmoscope , Slit Lamp , Chemicals And Kits , Grams Iodine Solution(12Ml) , Sulphuric Acid Solution 20% (125Ml) , Methylene Blue Staining Solutiin(125Ml) , Carbol Fuschin Staining Solton(125Ml) , Safranine Solution (125Ml) , Acetone (125Ml) , Bleaching Powder(400Gm) , Immersion Oil , Leishman Stain(125Ml) , Sodium Hydrogen Phosphate(Na2 Po4 500Gms , Sodium Dihydrogen Phosphate(Na2 Hpo4 500Gms , Sodium Carbonate(Na2 Hc03) 500Gms , Sodium Bicarbonate(Na2 Hc03) 500Gms , Whats Mann No-1 Filter Paper(Chromatography) , Amino Acids Kit(All A.As)-Solids , Ninhydrin 25Gms , N-Butanol 500Ml , N-Propanol 500Ml , Dethylbarbituric Acid 100Gms , Sodium Diethyl Barbiturate 100Gms , Bromophenol Blue(Indicator) , Zinc Sulphate , Sodium Acetate 100Gms , Serum Creatinine , Serum Bilirubin , Alt/Ats(Sgot/Sgpt) , Alp(Alkaline Phosphatase) , Serum Uric Acid , Serum Triglycerides , Serum Hdl Cholesterol , Micropipette(5-50Ml) , Micropipette(100U-1 Ml) , List Of Models , Activated Sludge Process , Anthrax On Face , Berkefeld Filter , Biogas Plant , Broe Hole Latrine , Chicken Pox(Vesicular Stage) , Deep Well , Dental Caries , Drainage System , Goitre , Horrocks Apparatus , L.H Entamoeba Histolytica , H.L Dipotharium Latum , L.H Taenai Saginata , L.H Ancyclostoma Duodenal , L.H Taenai Solium , L.H Malaria(Plasmodium) , Kala-Azar , Measles , Pellagra , Pit Latrine , Prevention Of Typhoid Fever , Prevention And Control Of Cholera , Rapid Sand Filter , Sanitary House , Sanitary Well , Small Pox (Haemorrhage) , Skin Leprosy With Nodulation , Spread Of Typhoid Fever , Spread $Prevention Of Cholera , Spread Of Dysentery$ Diarrhea , Soil Testing Kit , Sanitary Slaughter House , Septic Tank , Sewage Disposal System , Sewage Treatment Plant , Slow Sand Filter , Step Well , Trench Latrine , Water Closet , Mango Toy , Egg , Amla , Mites , Rat Flea , Ticks , Culex , Black Fly , Anopheles , Sand Fly , House Fiy , Ades , Tapeworm , Schistosomia , Cyticercus , Liver Fluke , Echinococcus , Amoeba Proteus (Entomology Slides) , E. Histolotica , Malaria Parasite In Human Blood(All Stages) , Malaria Parasite Oocystin Mosquito , Malarla Parasite Signet Ring , Liver Fluke , Tapeworm Proglotid , Tape Worm Proglotid Mature , Ancylostoma , Pinworm , Hard Tick , Soft Tick , Anopheles Female , Anopheles Male , Anopheles Mouth Part Female , Anopheles Mouth Part Male , Anopheles Mouthpart Male , Anopheles Mouth Part Female , Anopheles Wings , Anopheles Larva , Anopheles Pupa , Culex Female , Culex Male , Culex Mouth Part Male , Culex Mouth Part Female , Culex Wings , Culex Larva , Culex Egg , Culex Pupa , House Fiy Female , House Fly Male , House Flymouth Part Male , House Fly Mouth Part Female , House Fly Wings , House Fly Egg , House Fly Pupa , Body Louse , Pubic Louse , Head Louse , Rat Flea Male , Rat Flea Fe Male , Pediculus Eggs , Bacteria Lactobacillus , Bacteria Vibrio Cholarae , Bacteria Shigella , Bacteria Staphylococcus , Bacteria Streptlococcus , Mite , Necator , Plasmodium Malariae , Plasmodium Falciparum , Plasmodium Vivex In Blood , Trichinella Spiralis Cyst In Muscles , Aedes Female , Aedes Male , Aedes Mouth Part Male , Aedes Mouth Part Female , Aedes Wings , Aedes Larva , Aedes Egg , Aedes Pupa , (A) Clinical Pharmacy , Special Drug Delivery Systems Like Metered Dose Inhalers, Spacers, Rotahalers, Nasal Sprays, Transdermal Patches, Insulin Infusion Pumps, Insulin Pen. , Samples Of Dosage Formulations Of Various Types Including Rational And Irrational Fdc, Essential Medicines. , Manikins For Demonstration Of Intravenous Injection, Enema, Local, Intramuscular Injections, Intracardiac Injection And Other Routes Of Drug Administration. , (B) Computer Assisted Learning Laboratory , Computers With Standard Configuration And Connected To The Internet, (Preferably Broadband) Along With An Av Aids (Multimedia Projector And Screen). The Pc Should Be Installed With Cal Programmes And Other Software For Teaching Experimental Pharmacology. (The Students Must Have Access To The National Essential Drug Lists, Standard Treatment Guidelines, Banned Drugs List Of The Cdsco, Pvpi, Who, Price Controlled Drugs List, Antibiotic Guidelines, Hospital Formulary, Adverse Drug Reactions, And Other Resource Material Which The Student Can Usefor Learning The Principles Of Rational Prescribing.) , Refrigrator , Window Curtains , Door Curtain , Handwash , Big Dustbins , Printers , Computer Cover , Key Holder/Hanger , Scissor , Red Pen , Blue Pen , Face Masks , Window /Split A.C (1.5 Ton) , Cup Set , Dinner Set , Photocopier , Notice Board , Writing Pads , Induction Stove , Smart T .V , Bed Sheet 6.5Ft X 4.5Ft , Pilo , Stabilizer For(Dead Body Deep Freezer) , Extension Board , Wall Clock , Articulated Skeleto , Pencil Battery , Remote Battery , Rubber Gloves (Big Size Till Elbow , Apron (For Dissection) , Plastic Coloured Shoes , Chain, Lock $ Key Set , Disarticulated Bones Set , Allotment Register , Ink For Ink Pad(Blu$Black) , Stapler Pin 10No , Quick Heal Antivirus 3 User/1Year , Ricoh Xerox Machine Mp2014ad , General Register 10 No , General Register 8 No , General Register 6 No , General Register 4 No , Cello Tape 2Inch , Issue Register 10 No , Dispatch Register 10 No , Printing Items , Examination Copy Printed12page(Rulling)9X11per1000 , A4 Size Paper(One Side)Per100 , A4 Size Paper(Both Side)Per100 , A3 Size Paper(One Side)Per100 , A3 Size Paper(Both Side)Per100 , A8 Size Paper(One Side)Per100 , A8 Size Paper(Both Side)Per100 , Spirit 500Ml , Cotton 500Gm , Sodium Hydroxide , Acetic Acid , Alcohol 70% , Alcohol 90% , Alcohol 90% , Alcohol 90% , Hydrocloride Acid 500Ml , Alcohol (Absolute) , Formaline , Glycerine , Hydrogen Peroxide 500Ml , Pipet 200 Micro Ltr. , Barcode Roll (Double Sticker) , Gloves No.65
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
49.
Educational and Research Institute #10433226 AOC
Supply Of Stationery, Chemicals, Equipments And Others , Stationery , Chair Towel (40X80 , Minimum 550Gsm) , Hand Towel (40X60 Cm, Minimum 300Gsm) , Stapler - 24/6 (Kangaro/Camlin) , Stapler Pin (24/6) , Stapler No-10 (Kangaro/Camlin) , Stapler Pin No-10 , Heavy Duty Stapler For 250 Pages ( Kangaro/ Camlin) , Heavy Duty Stapler Pin For 250 Pages ( Kangaro/ Camlin) , Room Spray , Attendance Register For Staff(50 Page) , Attendance Register For Students (48 Page) , Cotton File Tag (Pack Of 100Pcs.) , Permanent Marker (Thin 0.5 Mm) , Pencil (Hb) , Eraser , Sharpner , Magnetic Pin Holder , Grass Doormats (2X3 Feet) , Microfiber Doormats (2X3 Feet) , Cotton Doormats (2X3 Feet) , Calculator , Brass Desk Bell , Paper Weight , Button File (Pack Of 12Pcs.) , Scissors (10.2L X 10.2W Cm) , Envelope A3 , Envelope A4 , Envelope Dl , Transparent Cello Tape Roll (2Inch) , Brown Cello Tape Roll (2Inch) , Notice Board Pin (Pack Of 100Pcs.) , Notice Board (3.5X4feet) , Whitener Pen (Camlin/Reynolds/Doms) , Blue Stamp Pad (Camlin/Doms/Reynolds) , White Board Duster , Glass Marker Pen (Pack Of 5) , Equipments , Laboratory Refrigerator(Mininum 400) 02-08 Degree Celsius , Binocular Microscope With Led Light Source , Micropipette(Multichannel Of 8) , Micropipette(Multichannel)2-20 Micro , Micropipette(Multichannel)20-200 Micro , Micropipette(Multichannel)1000 Micro , Micropipette Stand , Vortex Mixer , Biosafety Cabinet Type 2A , Digital Thermometer , Microscope For Student-Led Binocular,10X,40Xand Oil Immersion And Inbuilt Battery Backup Power Source , Co2 Incubator , Microscope With Universal Condenser Containing Oil Immersion,Bright Field,Phase Contrast And Dark Ground , Microscope Binocular (Compound Binocular Microscope With Led And Max Magnigication Of 2500X) , Needle Destroyer , Automated Blood Culture System , Plain Slide (75Mmx25mmx1.2Mm , Cover Slip (22Mmx22mmx0.13Mm , Sterile Universal Container , Serological Slide For Aso,Rpr And Ra , Serological Slide For Widal Test , Slide For Vdrl (Pack Of 100Pcs.) , Sterile Swabs , Blotting Paper , Forceps , Bone Set Disarticulated , Bone Set Articulated , Glass Test Tube , Sprite Lamp(Standard Size) , Test Tube Stand (Minimum For 10 Tube) , Test Tube Holder , Lancet (Pack Of 100 Pcs.) , Glass Slide (Pack Of 100 Pcs.) , Dropping Bottle(60Ml) , Direct Ophthalmoscope(Heine Large Size) , Ab Scan (Nidek) , Led Vision Drum , Slide Rack (Minimum For 10 Slides) , Mannequin , Glass Stirring Rod (150X6mm) (Pack Of 100 Pcs.) , Pasture Pipette (5Ml) (Pack Of 10 Pcs.) , Test Tube Cleaning Brush , It And Electronics , All In One Pc (Monitor-23 Inch Processor- I5 13Th Generation, Ram- 16Gb Ddr5, Storage- 1024Gb Ssd, Preinstalled Windows 11 Pro And Preinstalled Microsoft Office 2024 Professional With Original Product Key) Brand Prefered: Acer, Hp, Dell, Asus , Laptop (15 Inch Display, Processor- I5 13Th Generation, Ram- 16Gb Ddr5, Storage- 1024Gb Ssd, Preinstalled Windows 11 Pro And Preinstalled Microsoft Office 2024 Professional With Original Product Key) Brand Prefered: Acer, Hp, Dell, Asus , Color Laserjet Printer Paper Size- A3+, A3, A4, A5, A6, B4, B5, Tabloid, Legal, Letter, Half Letter, 5X7, 4X6, 3.5X5; Envelopes: #10, Dl, C6, C4 Print Speed (Color)- 32Ppm Print Resolution- 4800 X 2400 Dpi Scanner Type- Flatbed Colour Image Scanner Scan Speed- Scan Speed (Flatbed / Adf (Simplex | Duplex)): 200Dpi, Black: 5 Sec / Up To 26.0 Ipm | 11.5 Ipm; 200Dpi, Colour: 10 Sec / Up To 9.0 Ipm | 6.0 Ipm Optical Resolution: 1200 X 2400 Dpi Maximum Scan Area: 297.18 X 431.8 Mm (11.7 X 17) Connectivity- Usb 2.0, Ethernet, Wi-Fi Direct, Wi-Fi Ieee 802.11B/G/N Prefered Brand: Hp, Canon, Epson, Brothers , Laserjet Printer Printer Output- Black Printer Type- Laser Functionality- Print And Scan Connectivity- Usb 2.0 Compatibility:Windows 11, Windows 10, Windows 8.1, Windows 7 Pages Per Minute - 35 (A4) Black Media Sizes Supported : A4 Prefered Brand: Hp, Canon, Epson, Brothers , Laserjet Printer Printer Output- Black Printer Type- Laser Functionality- Print, Auto Feeder And Flatbed Scan, Copy Connectivity- Usb 2.0, Wifi Compatibility:Windows 11, Windows 10, Windows 8.1, Windows 7 Pages Per Minute - 43 (A4) Black, Fpot- 5.7 Sec Media Sizes Supported A3; A4; A5; A6; B4 (Jis); B5 (Jis); 8K; 16K; Oficio 216X340mm Media Sizes, Custom Tray 1: 98 X 148 To 297 X 432 Mm; Tray 2: 148 X 210 To 297 X 354 Mm; Tray 3: 148 X 210 To 297 X 432 Mm Standard Media Sizes (Duplex) A3; A4; A5; B4 (Jis); B5 (Jis); Oficio 216X340mm; 8K; 16K Prefered Brand: Hp, Canon, Epson, Brothers , Pen Drive 64 Gb (Hp/Samsung/Acer/ Sanddisk With Minimum 30Mbps With Read And Write Speed) , Usb To Type C Cable , Spss Software , A3 Lamination Machine , A3 Spiral Binding Machine , Electrical , 6 Amp Extension Board With Minimum 5M Copper Wire , Fan Condenser2.5 , Aaa Battery , Aa Battery , 3 Star Refrigerator Minimum 235 Litre (Samsung/Lg/Haier/Whirlpool) , Split Air Conditioner 1.5 Ton, 5 In 1 Covertible, 5 Star, 4 Way Swing, Copper Wire Coil, With Large Indoor And Outdoor Unit (Voltas/Samsung/ Panasonic/ Godrej/ Haier/ O General/ Hitachi/ Blue Star) , Split Air Conditioner 2 Ton, 5 In 1 Covertible, 5 Star, 4 Way Swing, Copper Wire Coil, With Large Indoor And Outdoor Unit (Voltas/Samsung/ Panasonic/ Godrej/ Haier/ O General/ Hitachi/ Blue Star) , Sine Wave Inverter 24V/2000Va (Microtek/ Luminous/ V Guard/ Exide) , Battery 250Mah, 12V (Exide/Lumious/Microtek) , Television 50 (4K, Ultra Hd)- Samsung, Lg, Sony , Electric Trimmer , Ceiling Light (2X2 Feet) , Chemicals And Other Chemicals , Spirit (500 Ml) , Gauge Than , Leishmans Stain 250Ml , Double Distilled Water 5Kg , Tissue Paper Roll , Immersion Oil (Cedar Wood Oil )100Ml , Gloves (6.5/7.5 ) , Rbc Fluid (Haems Fluid ) 500 Ml , Wbc Fluid (Turks Fluid) 500 Ml , Abo Anteserum 10 Ml , Ns (Normal Saline ) 500Ml , Filter Paper (100 Pcs ) , Capillary Tube ( 100 Pcs ) , Lancet And Disposable Needle 22 , Xylene(Sulpher Free )75 Ml , N/10 Hcl 500Ml , Sodium Citrate (3.8 % ) 500 Ml , Double Oxalate ( 10 Gm) , Ecg Jelly (200 Ml ) , Ecg Paper Roll (Bpl Cardiart 108 T Odigi ) , Double Oxalate ( 20 Gm ) , Pepton Water Base Packet (500 Gm ) , Nutrient Broth Base Packet (500 Gm) , Muller Hinton Agar Base ( 500 Gm) , Lj Medium-Commercially Prepared , Lofflers Serum Slope , Sabouraud Dextrose Agar Base(500 Gm ) , Wilson And Blair Medium Base ( 500 Gm ) , Robertson Cooked Meat Medium Commercially Prepared , Sanitizer 1 Ltr , Cedarwood Oil 33Ml , Distilled Water, 1Ltr , Speite Alcohol 95% 500Ml , Formalin, Ltr 5Ltr , Hyemes Fluid (Rbc Dilu , Leishman Stain 250Ml , Elbow Gloves5 , Hand Gloves7 , Cotton Roll 500Gm , Hand Wash 500Ml , Serum Total Protein (Biuret Method)- 150Ml , Serum Urea (Berthelot Method- 75Ml , Serum Albumin (Bcg Method)- 75Ml , Serum Cholesterol (Chod/Pap)- 75Ml , Benedicts Reagent- 500Ml , Acetic Acid (1-3%) 500Gm , Ammonium Sulphate 500Gm , Ammonia Solution (Sp. Gr-0.91) , D-Glucose Anhydrous 500Gm , Hydrogen Peroxide (6.5% W/V) 400Ml , Benzidine Powder 25Gm , Silver Nitrate (N/10) 500Ml , Formalin (In Litre) , Spirit (In Litre) , Carbolic Acid(In Litre) , Glycerine (In Litre) , Thymol Powder (In Kg) , Hamemotoloxy & Eoxin Stain (In Litre) , 1% Hcl , Xylene , Wax ( Paraffin) , Plain Slide (Microscope) , Slide Cover Ship , Handwash (In Litre) , Glass Cleaner (500Ml) , Phenyl (Black) In Litre , Room Freshner , Bandage (4) , Scalpel Blade , Non Absorable Surgical , Wall Hanging , Tourniquet Rubber , Anti Abo, Rh , Glass Capillary Tube , Models , Herpes Simplex Virus , Rota Virus , Helical Structure Of Virus , Dna Model , Influenza Virus , Hiv-Virus , Polio Virus , Activated Sludge Process , Anthrax On Face , Deep Well , Horrocks Apparatus , L.H Entamoeba Histolytica , H.L Dipotharium Latum , L.H Taenai Saginata , L.H Ancyclostoma Duodenal , L.H Malaria(Plasmodium) , Kala-Azar , Measles , Pellagra , Prevention Of Typhoid Fever , Prevention And Control Of Cholera , Rapid Sand Filter , Sanitary House , Sanitary Well , Small Pox (Haemorrhage) , Skin Leprosy With Nodulation , Spread Of Typhoid Fever , Spread & Prevention Of Cholera , Spread Of Dysentery$ Diarrhea , Soil Testing Kit , Sanitary Slaughter House , Septic Tank , Sewage Disposal System , Sewage Treatment Plant , Slow Sand Filter , Step Well , Trench Latrine , Water Closet , Mango Toy , Egg , Amla , Culex , Black Fly , Anopheles , Sand Fly , House Fiy , Ades , Tapeworm , Schistosomia , Cyticercus , Liver Fluke , Echinococcus , Aedes Female , Aedes Male , Aedes Mouth Part Male , Aedes Mouth Part Female , Aedes Wings , Aedes Larva , Aedes Egg , Aedes Pupa , List Of Charts , Bacterial Cell And Bacterial Cell Wall , Gene Transfer-A. Conjugation, , Stock Culture Atcc Strains Of , Staphylococci Aureus , Staphylococci Albus , Streptococcus Pyogens , Enterococcus Faecalis , E. Coli , Klebsiella Pneumonia , Candidaalbicans , Aspergillus Fumigates , Proteus Mirabilis , Pseudomonas Aeruginosa , List Of Slides , Corynebacterium Diphtheriae-Alberts Stain , Mycobacterium Leprae-Afb Stain , Plasmodium Vivax , Plasmodium Falciparum , Gamatocytes Of P. Falciparum , Gamatocytes Of P.Vivax , Candida Albicans , L.D.Bodies , Microfilaria$W. Bancrofit , Cryptococcusneoformans , Aspergillus , Mucor , Rhyzopus , Bacillus Anthracis , Clostrdium Tetani , Histology Prepared Slide , Crockery , Cup And Soccer Set Of 6Pc(Borosil/Milton/Cello/La Opala) , Bone China Tray (Milton/Cello/La Opala) , Glass Set Of 6 , 1 Litre Plastic Water Bottel (Cello/Milton) , Steel Spoon , Dinner Set For 6 Person (Borosil/Larah/Cello/ Milton) , List Of Specimen , Round Worm , Hook Worm , Hydatid Cyst , Tape Worm , Guinea Worm
Contract Date: Aug 23, 2025 Contract Value : 13.48 Lakh
Boards / Undertakings / PSU No of Bidders 10
50.
Housing Urban and Rular Development #10427022 Price Bid
Construction Of Sump Well Pump Room And Sitc Of Rotary Lobe Pump Sets Along With Related Eandm Equipments At Rahim Khan Road Nizamuddin East New Delhi Under Ser-1 Civil And Electrical Work-SH-I Pump Set WorkSupplying, installation, testing and commissioning of Positive displacement Rotary Lobe Pump for draining/dewatering of storm water/sewer water compatiblefor VFD (variable frequency drive) having minimum discharge 500 m3 /hr at 68Hz and 170 m3/hr at 25 Hz for 10 mtr. head and 5 mtr. suction Lift capacity complete withGeared Motorwith minimum power 45 kW/60 HP, 4 Pole suitable for operation on 415 Volt 50 Hzas per additional specification etc. as required. 2 Supplying, fabrication & installation of45KW VFD AUTO CONTROL PANEL made out of CRCA sheet steel of thickness 2mm for load bearing members, 1.6mm for non load bearing section with necessary stiffeners as required. 3 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 4 250 m.m dia 5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required: 6 250 m.m dia 7 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 8 40 mm dia 9 80 mm dia 10 250 mm dia (wall thickness 6.3 mm) 11 450 mm dia (wall thickness 7.0 mm) 12 Fabrication, Supplying, Installation Testing & commissioning of automatic motorised Mechanical Coarse Bar Screen Suitable for channel dimension:i) Channel width: 1000mmii) Channel Depth: 3500 mmiii) Water Depth: 1500 mmiv) Bar Spacing: 20 mmv) Bar size : 12X6X50 mm vi) Angle: 75 Degreevii) MOC: SS304 Peak Flow/ Screen: 27MLDi/c Supplying, Installation, Testing & commissioning of 1No relay based control panel made out of 2mm thick CRCA sheet for 2Nos. Mechanical Coarse Bar Screen & 1No.Belt Conveyor etc. complete as required. - 13 Supplying, Installation, Testing & commissioning of Differential Level Sensorcomprises of Two Ultrasonic Level Sensors and One Differential Transmitter for Mechanical coarse bar screenetc. complete as required. 14 Supplying, Installation Testing & commissioning ofBelt Conveyor of size 600 mm width and2000mm Length i/c accessories for screen etc. complete as required. 15 Supplying, Installation Testing & commissioning of Gate Assy FG A101 Cast Iron Side Wall Embedded Oen Channel Gate (101) Size: 1000(W) X 1000 (H) mm Suitable for 1.75 m Seating water head (From invert Level) , Flush Bottom Closure Arrangement , Manually operated, Close Top Frame Gate etc. complete as required. 16 Supplying, Installation Testing & commissioning of Ultrasonic Level Transmitter with 4 ANSI PP Flange etc. complete as required. 17 Supplying, Installation Testing & commissioning of Local Control Stations for Pump Motors having following accessories i/c making connections etc. complete as required:a)DP MCB, 10kA, C-Curve for Control, 6A;: 1 No.b)Ampere meter, SIF-96, CI-1, Aux Supply 230V AC; 4-20mA I/P;1 No.c)Indicating Light-RED for ON;1 No.d)Indicating Light-AMBER for TRIP;1 No.e)Push Button with 1 NO contact - GREEN for VFD START;1 No.f)Push Button with 1 NC contact - RED for VFD STOP;1 No.g)Push Button with 1 NC contact - Mushroom head RED;1 No.h)Thermistor Relay 252 PMTG;1 No.i)Control Terminals, 2.5 sqmm; 6A;22 Nos. 18 SH-II Diesel Generator SetSupply, installation, testing and commissioning of Silent Type, CPCB IV + emission compliants Diesel Generating set having Prime Power Rating of 200 KVA, at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 Phase system & for 0.85 Load Factor with all necessary equipments and accessories and consisting of followings :(a)Diesel EngineDiesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C, 50 % RH & at 1000 meterMSL and conforming to BS 5514, BS 649, IS 10000(amended upto date), capable of taking 10 % overloading for 1 hourafter12hourofcontinuousoperation.Theenginewillbefittedcompletewithall accessories as per specifications .(b)Enginemountedinstrumentpanelfittedwithandhavingdigitaldisplayforthe following :-(i) Start stop switch with Key (ii) Water temperature indication (iii) lubrication oiltemperatureindication(iv)lubricationoilpressureindication(v) Batterycharging indication (vi) RPM indication (vii) Over speed indication (viii)Low lube oil trip indication(ix) Engine hour indication. 19 (c)AlternatorSynchronous alternator rated at 200 KVA, 415V, at 1500 RPM, 3 Phase, 50Hz, AC Supply with 0.8 lagging power factor at 40 Degree C, 50% Relative Humidity & at 1000m above MSL. The alternator shallbehavingSPDPenclosure,brushless,continuousduty,self-excitedandself-regulatedthrough AVR, confirming to IS: 4722 /BS : 2613suitable for tropical conditions and withF/H insulation.(d) Base Frame &foundation: Both the Engine & alternator shall be mounted on suitable baseframemadeofMSchannelwithnecessaryreinforcementwhichshallbeinstalledon suitablecementconcretefoundationandvibrationisolationarrangementasper recommendations of manufacturer.(e) Fuel Tank : Daily service fuel tank ofminimum 385 Ltr capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank & diesel engine with MS class C Pipe of suitable dia complete with valves, level indicators, and accessories as required as per specification.(f) Exhaust System : Dry exhaust manifold withsuitable exhaust residential gradesilencer . 20 (g) Starting system : 24V DC starting system comprising of starter motors, voltage regulator and arrangementforinitialexcitation,completewith suitableno. of batteries(25Plates,180 AmpsHour Capacitylead acid type) as required as per specification.(h) Acoustic Enclosure : Acoustic and weather proof enclosure with arrangement for fresh airintakeforcoolingoftheengineandalternator,extractiondischargeofhotairinto atmosphere as per specifications. 21 AMF Panel(i) Fabricating,Installation, Testing & Commissioningofautomaticmainsfailurecontrolincludingautobypasspanel,suitable for 200 KVAsilenttypeDGsetcompletewithrelays,timers,setofCTs,formeteringand protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH& Provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to Diesel Engine and elsewhere, if required, all complete and interlocking including the following :-(a) 3 nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release.(b)Auto / manual /test/off selector switch.(c) 2 nos. over voltage relay, 2 nos. reverse power relay and 2 nos. under voltage relay.(d)1 no. Auto mains failure relay(e) 3 sets of current transformer15P 10 accuracy for protection andclass 1, 15VA class-Ifor metering and. AMF Relay.(f) Energy analyzer unit to indicate current, voltage, frequency power factor and KWH.(g) Indicating lamps for load on mains and load on set.(h) Fuse for instruments.(i) Battery charger, complete with all accessoriesand Ammeter,voltmeter etc. 22 (j) Supply failure& restoration timer(k) Main supply failure monitor(l) Control unit with three impulse automatic engine start/stop and failure to start lock out.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator.(o)Aux. contactor 2NO+2NC(p) Audio/Video annunciation for :(i) High water temperature.(ii) Low lubricating oil pressure.(iii) Engine over speed(iv) Engine fails to start.(v) Full load/ Maximum load warning. 23 Main LT PanelSupplying, installation, testing & commissioning of LT panel of minimum front area 3.15 sq. mtr. and depth not less than 45 cm, made out ofCRCA Sheet Steel 2mm for section with necessary stiffeners as required. Free standing, self supported, floor mounting, single front, indoorinstallation, non draw out and compartmented. ISMC-100 fabricated channel frame with undrilled holes.Bottom with undrilled detachable 3mm gland plate as per order .Welding will be carried out with no external deposition of welded material in particular places and there will not be any gap between the welded materials.Siemens Grey RAL 7032CRCA Structures shall be pre-treated in seven tank chemical process, heated in baking oven.Minimum 60 micron of approved shade (RAL-7032).230V AC for Main LT Panel and Other Panels415+/- 5% , 50Hz+/-5%, 3 Phase 4 Wire 50KA – 1 Sec TPN Aluminum Electrolytic Grade ( E-91E) busbar shall be provided as per suitable sze, duly supported on SMC/DMC, busbar supports & insulated with color coded heat shrinkable sleeve. Power wiring will be through Vertical Bus -Bar and 1.1 KV grade PVC multistrand copper flexible cable . All control wiring will be done by 1.5 sq mm copper flexible PVC multi strand wire. CT wiring shall be carried out with 2.5 sq mm copper flexible PVC multistrand wire.1. All R,Y,B,N phases will be Red, Yellow , Blue & Black 2.All control wiring will be Grey colour. Earthing shall 24 be be with Green color wire.3.C.T. - Wiring through Red, Yellow, Blue, Black coloured wiring with shorting link type terminals.EPDM gasket provided at all joints, doors & covers to make panels dust & vermin proof (IP-52)Section-I(a) INCOMER :-1No. 4nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release. Ics=100%Icu i/c extended rotary handle and spreaders and all required accessaries Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch & back up HRC fuses/MCBs … complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set(b) 400 AOnload Change over SwitchIcs=100%Icu i/c extended rotary handle and spreaders and all required accessories- 1setIndicating lamp On, OFF, TRIP /R/Y/B/Ready to close complete 1set(c) OUT GOINGS:- 4Nos. 100A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etc complete as reqd. 25 Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch etc complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set3 Nos. 63A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etcwith indicating Lamps complete as reqd. 26 SH-III EI Work Supplying & Laying of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following size on cable tray as required. 27 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable (clamped with 40x3mm MS flat clamp) 28 3 X 50 sq mm (clamped with 25x3mm MS flat clamp) 29 Supplying, Laying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cableof 1.1 KV grade of following sizes on wall surface etc. as required. 30 4X25 Sq. mm. (clamped with 1mm thick saddle) 31 Supplying & Laying and fixing of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following sizedirect in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 32 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable 33 Supplying and Laying of XLPE insulated and PVC sheathed Copper conductor armoured Power Cable of 1.1 KV grade of following size on cable tray as required. 34 4x4 Sq.mm. 35 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 36 3½ X 240 sq. mm (62mm) 37 3 X 50 sq. mm (32mm) 38 4 X 25 sq. mm (28mm) 39 Supplying and drawing following size of PVC insulated copper conductor multicore cable of following size on cable tray as required. 40 10 core 1.5 sq.mm 41 24 core 0.5 sq.mm 42 4 core 0.5 sq.mm 43 2 core 1.5 sq.mm 44 6 core 0.5 sq.mm 45 3 core 0.75 sq.mm 46 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 47 100 mm width X 50 mm depth X 1.6 mm thickness 48 450 mm width X 50 mm depth X 2.0 mm thickness 49 EarthingEarthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 50 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 51 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithbrassnut,bolt,spring,washerexcavationandre-fillingetc.as required. 52 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 53 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithG.I.nut,bolt,spring,washerexcavationandre-fillingetc.as required. 54 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. asrequired. 55 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 56 Group C 57 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 58 3 x 4 sq. mm 59 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 60 25 mm 61 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 62 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 63 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 64 4 way (4 + 12), Double door 65 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 66 Single pole 67 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 68 63 amps 69 Supplying, Installation, testing & commissioning of weather proof LED Corrosion resistant battentype LED fitting of following wattagewith IP65 body made out of polycarbonate housing & opal diffuser with better thermal managementCCT-5700°KLumen Efficacy ≥110 Lm/W Power Factor≥ 0.95, CRI≥70, with constant current driver etc. complete as reqd. 70 36 Watt (4 feet ) 71 SITC of 450 mm heavy duty Exhaust Fan 1400 RPMsingle phase 240 Volt 50 Hz in the existing opening, complete with heavy duty louver/ shutter i/c making the hole to suit the size of the above fan, making good the damages, connection, testing, commissioning & earthing etc. as required 72 SITC of 600mmwall mounted fan having 3 nos. of blades, 1440RPM etc complete as reqd. 73 SH-IV AMCAMC for pump sets, Motor control panel and other accessories starting after satisfactory completion defect liability period from date of completion and commissioning of the pumping system.Annual Comprehensive maintenance for all 3 Nos. Pump sets, Motor, VFD Auto control panel, Mechanical Course Bar Screen, Differential Level sensor, Ultra Sonic Level Transmeter, Belt conveyor, Gate assembly including all accessories and consumables etc. all complete and as per site requirement as per Engineer-in-charge. 74 For 1st Year (Free Maintenance period) 75 For 2nd Year 76 For 3rd Year 77 Comprehensive maintenance of 200 KVA Silent type DG Set with AMF Panel. Annual Comprehensive maintenance of 200 KVA DG set and its accessories with AMF Panel i/c repairing, servicing, cleaning, checking and Descaling with replacment of following consumable parts i.e oil filter, fuel filter, air filters, coolant, lube oil, coolant filter, battery water, V Belts and batteries etc. complete and as per site requirement as per Engineer-in-charge. 78 For 1st Year (Free Maintenance period) 79 For 2nd Year 80 For 3rd Year 81 Civil WorkDemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 82 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 83 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 84 All kind of soil. 85 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 86 Providing and laying in position ready mixed or site batched design mix cement concrete for plai plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads: but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 87 Concrete of M10 grade with minimum cement content of 220 kg /cum 88 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 89 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 90 Suspended floors, roofs, landings, balconies and access platform 91 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick 92 Edges of slabs and breaks in floors and wallsAbove 20 cm wide 93 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slagcement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge;for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade withminimum cement content of 330 kg /cum 94 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 95 Thermo-Mechanically Treated bars of grade Fe-500D or more. 96 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 97 Cement mortar 1:4 (1 cement : 4 coarse sand) 98 12mm cement plaster of mix 1:4 (1cement:4 fine sand). 99 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 101 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 102 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre 103 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :Ordinary roack 104 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 105 Providing and fixing soil, waste and vent pipes : 100 mm dia. : 106 Sand cast iron S&S pipe as per IS: 1729. 107 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 108 Circular shape 450 mm dia 109 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 110 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 111 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 112 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 113 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm : 114 Sand cast iron S&S as per IS - 1729 115 Providing and fixing plain bend of required degree : 100 mm 116 Sand cast iron S&S as per IS - 1729 117 Providing and fixing single equal plain junction of required degree: 100x100x100mm, 118 Sand cast iron S&S as per IS-1729. 119 Providing and fixing terminal guard: 100mm : 120 Sand cast iron S&S as per IS:1729. 121 Providing and fixing collar:100mm : 122 Sand cast iron S&S as per IS:1729. 123 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 124 100mm : 125 Providing and fixing trap of self cleanising design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet and 100mm outlet : 126 Sand cast iron S&S as per IS:3989. 127 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 128 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 129 25mm dia nominal bore. 130 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tees including cutting andthreading the pipe etc. complete : 131 25 to 40mm nominal bore. 132 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 133 32mm dia nominal bore. 134 Providing and fixing C.P. brass bib cock of approved quality confirming to IS :8931 : 135 15mm nominal bore. 136 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931 : 137 15mm nominal bore. 138 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 139 25mm nominal bore. 140 Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats : 141 25mm nominal bore. 142 Providing and fixing brass ferrule C.I. mouth cover including boring and taping the main : 143 25mm nominal bore. 144 Providing and fixing unplasticised PVC connection pipe with brass unions : 45cm length : 145 15mm nominal bore. 146 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 147 Providing and fixing PTMT grating of approved quality and colour : Circular type : 148 100mm nominal dia. 149 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer : E.R.W. tubes. 150 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 151 Size of tile600x600mm. 152 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.Single socketed pipes : 153 110mm diameter. 154 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Bend 87. 5° : 155 110mm bend. 156 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Shoe (Plain) : 157 110mm Shoe. 158 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 159 Two or more coats on new work. 160 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : 161 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 162 Providing and laying in position ready mixedor site batched design mix cement concrete for plain cement concrete work;usingcoarse aggregateandfine aggregate derived from natural sources and usingrecycled concrete aggregate (RCA)as coarse aggregate and fine aggregate within thepermissible utilization,PortlandPozzolana / Ordinary Portland/Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concreteto improvedurability andworkabilitywithout impairing strength;including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering and finishingas per direction of the engineer-in-charge; for thefollowing grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level 163 Concrete of M25 grade with minimum cement content of 300 kg /cum.(Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 25% each). 164 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: 165 With 20x20 mm square bar 166 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 167 450 mm dia Ductile Iron Class K-9 pipes. *For use of bigger dia. pipes other than 450mm, net difference in basic rate as per applicable DSR shall be reimbursed to the contractor. 168 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) including applying of twice ( at base and top of mortar ) cement slurry @ 2.2kg/m2 (each time) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. 169 (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone. 170 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 171 Using rough Kota stone 172 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 173 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : 174 Red sand stone slab40 to 50 mm thick 175 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces 176 40 to 50 mm thick 177 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 178 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 179 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 180 Made of G.I. wire of dia 4 mm 181 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 182 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 183 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 Modified estimated cost after using correction factor on DSR-2023 on account of GST @0.973 vide O.M. dated 08.08.2024.(i.e. 9720555 *0.973 = 9458100 185 Carrying out structural analysis and design of all civil work, Design of all E&M works, foundation and superstructure of work such as pump-room, UGT and Delivery line upto Barapullah Drainage etc. all complete and submission of input data, check print structural drawing, 6 Nos. prints with soft copy of analysis and drawings as per direction of Engineer-in-Charge by approved structural consultant agency. The profile of structural consultant shall be got approved from NIT approving authority. The structural design shall be comprehensive to enable easy servicing of pumps and other heavy equipment’s etc. possible. The Hydrological data shall be provided to the consultant for drainage design.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
TenderDetail
Loading tenders