View Bid Results For Manufacturing Machinery Tenders

We found 348 Bid Results related to manufacturing machinery tenders. You can find Contractor details who won manufacturing machinery tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–7 of 348 tenders matching your filters

Water Resources and Irrigation #11491318 AOC

Contract Date: Ref. Documents Contract Value : ₹ 23.60 Lakh

Government Departments No of Bidders 1

Telangana View Result →

Drinking Water Supply and Sanitation #11348134 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Jharkhand View Result →

Drinking Water Supply and Sanitation #11315740 Technical Bid

Tender for Providing Services Of Heavy Duty Operator, Helper, Driver And Watchman For Government Machinery Working Under Deputy Engineer, Gate Manufacturing And Erection Sub-Division No. 1 Akola Working At Various Site For One Year.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

Educational and Research Institute #11299551 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

Rural Development #11141295 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Maharashtra View Result →

Drinking Water Supply and Sanitation #11105156 Technical Bid

Tender for Manufacturing, Erection, & Testing Of New Sliding Type Emergency Gate Of Size 0.9M X 0.9M. - 2 No.S Including Gate Leaf With Embedments & Screw Stem Hoist - Manufacturing With Qap, Fabrication, Erection, Commissioning & Testing As Per Standard Drawing / Approved Drawings & Specifications. Repairs & Painting Of Approach Bridge , Repairs To Existing Service Gates & Screw Stem Hoist - 2 No.S Including Labour , Material , Machining And Machinery Charges With Transportation & Local Handling At Site Etc Complete At Mandawi M.I. Tank, Tal. Kinwat & Dist. Nanded

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Maharashtra View Result →

Drinking Water Supply and Sanitation #11087677 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Jharkhand View Result →

Coal and Mines #11041956 AOC

Outsourcing Of Painting Of Machinery / Equipment At Alp Mine-1. M.S. Bolts & Nuts 2. Rivets, Washers & Screws 3. Dog Nails 4. Fish Plates, Nuts & Bolts For Fish Plates 5. Belt Jointing Pins 6. Cable Hooks And Signal Hooks 7. Belt Conveyor Rollers 8. Belt Sections 9. Resin Capsules 10. Cement Capsules 11. Gi Canisters 12. Blasting Gallery – Spacers 13. Radiator Repairs 14. Repairs And Rewinding Of Motors Of Ac & Dc 15. Repairs / Rewinding Of Transformers ( Welding / Lighting / Power ) 16. Gi Wire 17. Wire Mesh For Longwall Salvage 18. Manufacturing Of Supply Of Electrical Coils For Ac Motors Up To 6.6 Kv Grade And Transformer Coils Up To 33 Kv Grade 19. Repairs Of Rotors For Electric Motor 20. Lighting Cable 21. Steel Chock Manufacturing 22. House Wiring 23. All Types Of Fan Repairs 24. Shovel Bucket Welding 25. Repairs Of Pumps 26. Couplings Manufacturing 27. Special Steel And Alloy Castings ( Tooth Points, Track Pads, Mn Steel Casting ) 28. Manufacturing Of Fly Ash Bricks. ( Not To Be Manufactured At Stores Site. It Shall Be At Their Own Site ) . 29. Manufacturing Of Pump Components ( Spares ) . 30. Transformer Oil Filtration 31. Reconditioning Of Drill Bits And Drill Rods 32. Vulcanizing The Old Trailing Cables Of Drill Machines, Sdls, Lhds, Etc. ( Work Should Be Carried Out At The Respective Mine Premises ) . 33. Manufacturing Of Earth Clams, G.I Flats, G.I Bolts And Nuts. 34. Manufacturing Of Earth Pit Components And Erection. 35. Crimping Of Hydraulic Hoses. 36. Repairs To Hydraulic Pumps, Motors, Control Valves And Other Related Components 37. Refurbishing Of Lt & Ht Switches With Oem Spares Including Testing. 38. Manufacturing / Repairs Of Slip Rings & D-Contacts. 39. Furniture Repairs I.E., Cane Chairs, Table, Almirahs, Etc. 40. Repairs To Wet Grinders, Water Purifiers, And Water Coolers 41. Manufacturing Of Coupling Bolts Of All Sizes 42. Fabrication Of Oht Line Components Like Cross Arms, Clamps, Stay Wires, Cross Brassings, Base Plates Etc. 43. Manufacturing Of Haulage Rope Drum Rollers. 44. All Sizes Of Ventilation Doors.

Contract Date: Ref. Documents Contract Value : ₹ 67,980

Government Departments No of Bidders 1

Telangana View Result →

Rural Development #10906888 Price Bid

Tender for Providing Material To Gp Munjewadi For Constructing K.T.Weir @Munjewaadi As Per Following Boq To Gp Munjewadi, Tal.Jamkhed, Dist.Ahilyangar , Providing Following Material , Item No. 1 :Excavation In All Kinds Of Soils & Soft Murum Including Boulder Up To 0.6M Diameter (0.113Cum ) For Canal, Seating Of Embankment, Filter Drain / Catch Water Drain Etc. And Placing The Excavated Stuff Neately In Dump Area Or For Formation Of Service Road/ Embankment As Directed Including Cost Of All Material,Labour , Dressing Bed And Sides To The Require Level And Profile Etc. Complete With All Leads 15.0M And Lifts 6.0M As Per Specification. , Item No. 2 :Excavation In Hard Murum Including Boulder Up To 0.6M Diameter (0.113Cum ) For Canal, Seating Of Embankment, Filter Drain / Catch Water Drain Etc. And Placing The Excavated Stuff Neately In Dump Area Or For Formation Of Service Road/ Embankment As Directed Including Cost Of All Material,Labour , Dressing Bed And Sides To The Require Level And Profile Etc. Complete With All Leads 15.0M And Lifts 6.0M As Per Specification. , Item No. 3 :Excavation In Soft Rock Without Blasting Including Boulder Up To 0.6M Diameter (0.113Cum ) For Canal, Seating Of Embankment, Filter Drain / Catch Water Drain Etc. And Placing The Excavated Soft Rock Neately In Dump Area Or For Formation Of Service Road/ Embankment As Directed Including Cost Of All Material,Labour , Dressing Bed And Sides To The Require Level And Profile Etc. Complete With All Leads 15.0M And Lifts 6.0M As Per Specification. , Excavation In Hard Rock Of All Toughness By Blasting Including Boulders Above 0.6 M Dia.(0.113Cum) Minimising Damage To Side Slopes Of Excavation In Water Prism Area By Adopting Any One Or Combination Of Line Drilling/Pre-Splitting/Smooth Blasting Techniques And Placing The Excavated Rock Neatly In Approved Dump Area As Directed Including Cost Of All Materials, Machinery, Labour, Leveling Bed Etc., Complete With Lead Up To 15 M And Lift Up To 6 M. , Providing And Laying In Situ Cement Concrete Of Grade M-15 Of Trap / Granite / Gneiss / Quartzite / Graded Metal For Foundation And Bedding With Concrete Mixer Including Placing, Compacting, Curing With An Initial Lead Of 1 Km And All Lifts Etc. Complete As Directed.(A) M-15 (20 Msa) (Cement 5.64 Bags/Cum) , Providing Fabricating And Placing In Position Reinforcement Steel For Reinforced Cement Concrete Work Including Cutting, Bending, Hooking, Laying In Position And Tying M.S./ Hysd / Tmt Bars For Reinforcement Of As Per Detailed Drawing Etc. Complete As Directed. . , Providing And Fixing Straigh Needle K.T.Weir Gate-Manufacturing - Manufacturing With Qqp & Fabrication Of Kt Weir Needle Gate-Straight Type Size 2.15 X 0.5M-94 Kg. Weight As Per Relevant Indian Standards With All Metrial, Mild Steel Confirming To Is 2062, Rubber Seal Confirming To Is 4623 & Welding Electrodes Aws E6013 For General Weld Jonints, It Includes All Material, Labour Charges, Machinery Charges, J Km Lead Charges Of Transportation, Loading And Unloading Charges Of Gate Parts As Site, Inspection & Qulity Control Charges, Sand Blasing, Painting With One Coat Of Zinc Rich Primer On Dry Film To Give Total Dry Film Thickness 70 + -5 Microns And Coats Of Sloventless Coat Tar Epoxy Paint Applied To Give Minimum Dry Film Thickness Of 150+-5 Micron Per Coat As Per Is 14177. , Providing & Fabricating Structural Steel Work In Rolled Section Like Joist, Channels, Angles, Tees Tec. As Per Detailed Disign & Drawing Including Fixing In Pisition Without Anti Corrosive Paint &Over It Two Coat Of Oil Paint Of Approved Quality And Shade Etec.Complete. , Providing And Fixing Canal Information Board Of 1.2 X 0.75 M Prepared On16 Gauge M.S. Sheet With Angle Iron Frame Of Size 35 X 35 X 3 Mm With Cross Bracing Of Size 25 X 25 X 3 Mm Including Painting With One Coat Of Zinc Chromate Storing Primer And Two Coats Each Of Green/White Back Ground And Back Side Grey Store Enameled Bonded With Red Retro Reflective Sheet Engineering Grade, Border/ Letters/ Numeral/ Arrows Coated With Non Peal Able Crystal Clear Protective Transparent Coat Retaining 100% Reflection Including Two Angle Iron Post Of Size 50X50x5 Mm Of 3.65 M Long Inflated At Bottom Drilled On Top And Painted In White And Black Bonds Of 30 Cm With Four Numbers High Strength Of G.I. Bolts And Nuts Of Size10 Mm Dia. And 20 Mm Long Sheet And Angle Iron Post In One Piece Without Joints Including All Taxes, Conveying, Fixing In Ground With Cement Concrete In M-15 Block Of Size 60 X 60 X 75 Cm As Directed By Engineer- In-Charge. , Nala Degradation

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Maharashtra View Result →

10.

Housing Urban and Rular Development #10900458 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Jammu And Kashmir View Result →

11.

Railways #10882300 AOC

Supply Of Dynamic Wheel Balancing Machine (On Turnkey Basis) As Per Bid Document Part Ii Attached Below. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Comprehensive Annual Maintenance Contract For Dynamic Wheel Balancing Mac Hine [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 8 % ] ] At (Location) Sse/Wheel/Pl, Wr Maharashtra 1.00 Numbers 3 657933430011 Essential Non Stock --- Yes Tpi Agency Inr Spares (Y) Concomitant Accessories For Dynamic Wheel Balancing Machine As Per Bid Docum Ent Part Ii Attached Below [ Warranty Period: 30 Months After The Date Of Delivery ] ] Consignee Sse/Wheel/Pl, Wr Maharashtra 1.00 Set Inspection Details Stage Inspection Not Required 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 1 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 For All Items Completion : Within 330 Days Firm Shall Complete The Supply, Installation & Commissioning And Know - How Training To Concern Staff Of Consignee At Consignee Premises Within Stipulated Time Prescribed In Delivery Period. Payment Terms S.No Description Payment Terms 1 80% Payment Shall Be Made On Receipt Of The Items In Satisfactory Condition, Against Suppliers Challan Certiï¬Ed By Consignee Gazetted Oï¬Ƒcer, And Inspection Certiï¬Cate Issued By The Nominated Inspection Agency And After Successful Installation, Commissioning. Balance 20% Payment Shall Be Made After Issue Of Ptc(Proving Test Certiï¬Cate) (To Be Issued After One Month Performance Observation) By Consignee Subject To Submission Of Bank Guarantee For 10% Of The Contract Value For Warranty Obligations, Valid Beyond 6 Months Period Of Warranty. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His Oï¬€Er The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 1) The Contract Shall Be Governed By Latest Version (Along With All Correction Slip) Of Irs Conditions Of Contract And All Other Terms And Conditions Incorporated In The Tender Documents. (2) The Contract Shall Also Be Governed By Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before Tender Closing, Available As Public Documents Of Western Railway On Ireps Website (3)(A) It May Be Noted That Conditions Mentioned In Tender Schedule On Ireps Shall Prevail Over General Conditions Of Contract, Which In Turn Shall Prevail Over Irs Condition Of Contract. (B) Terms & Conditions/Speciï¬Cations Mentioned In Nit Shall Prevail Over Conditions Mentioned In Documents Attached With Nit. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 The Manufacturer Shall Have Valid Iso-9001 Certiï¬Cate On The No No Allowed Original Date Ofclosing Of Tender And A Copy Of Same Should Be (Mandatory) Submitted Along With The Bid (Dynamic Wheelbalancing Machine Shall Be In The Scope Of Iso Certificate). 2 1) The Bidder/ Manufacturer Must Have Supplied At Least 01 No No Allowed Numbers Of The Similar Or Higher Capacity Of Dwbm To Any Of Indian (Mandatory) Railway Production Unit Or Zonal Railways Or Other Government Organizations In Last 05 Years From The Date Of Closing Of Tender. Firm Must Upload Documentary Evidence Regarding The Past Successful Supplies Like Copies Of Receipt Note/Inspection Certiï¬Cate/Installation And Commissioning Report Etc. Along With The Oï¬€Er. (2) Performance Certiï¬Cate:Out Of The Item Supplied As Per Clause Above, The Bidder Shall, In Their Oï¬€Er, Submit Performance Certiï¬Cate Of At Least 01 Number Of Machine That Must Have Worked Satisfactorily For At Least One Year From The Date Of Commissioning.The Performance Certiï¬Cate Submitted By The Bidder Should Not Be More Than One Year Old I.E. It Should Have Been Issued Within One 01 Year From The Tender Closing Date Issued By The Actual End User Of The Machine. Page 2 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 3 Firm Shall Submit The Para-Wise/Item-Wise Compliance Of All The No No Allowed Parameters Mentioned In The Technical Speciï¬Cations Mentioned In (Mandatory) The Document Below. If There Is Any Deviation, The Same Shall Be Clearly Indicated In The Deviation Statement. A.Bid Document Part Ii 4 Firm Must Upload Documentary Evidence Regarding The Past No No Not Allowed Successful Supply Performance Like Copies Of Contract Order/Receipt Note/Inspection Certiï¬Cate, Installation And Commissioning Report Jointly Signed With The Actual User/Consignee, Ptc Etc. Along With The Offer, Failing Which The Offer Shall Be Liable To Be Rejected. 5 (1) Procurement Shall Be Done From Manufacturers (Oems) Or No No Allowed Authorized Agent / Dealer Of Oem. (2) Either Oem Should Quote (Optional) Directly Or Oem Can Give Tender Speciï¬C Authorization To Its Agent / Dealer To Quote On Their Behalf. (3) The Authorized Dealer Should Submit Valid Tender Speciï¬C Authorization, Along With The Oï¬€Er, Failing Which Their Offer Will Be Summarily Rejected. 6 Earnest Money Deposit (Emd): (1) Emd Shall Be Submitted By No No Allowed Tenderer As Speciï¬Ed In Tender Schedule, Along With Their Online (Optional) Oï¬€Er. There Shall Be No Exemption From Submission Of Emd For Any Tender Or By Any Tenderer Except Those Exempted. (2)Exemption To Submit Emd Will Be Given In The Following Cases : (A) Only Manufacturers Having Valid Udyam Certiï¬Cate Under Micro And Small Category Are Eligible For Exemption From Emd. (B) Other Railways And Government Departments. (C) Indian Ordnance Factories. (D) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them. (E) Vendors Registered With Railways For The Trade Group Of The Item Tendered. (F) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core, Subject To Approval Status Being Valid On The Date Of Tender Closing. (G) Vendors Registered With Railways For Supply Of Medicine, Medical Equipments And Consumables For These Items. (H) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued (I)Kvic And Acash For Items Supplied By Them. 5. Compliance Conditions Commercial-Compliance S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 The Bidder Conï¬Rms That Rates And Other Ï¬Nancial Terms Quoted In No No Not Allowed Relevant Columns Of Ï¬Nancial Bid Will Only Be Ruling Terms For Acceptance, And Such Terms Quoted Anywhere Else Should Be Ignored. (Denial Of This Condition Not Recommended) 2 Make In India Policy :- 1) As Per Clause 1800 Of Instructions To No No Allowed Tenderers And General Conditions Of Tender Indigenous Version 14 (Optional) Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 2) The Tender Will Be Governed By Railway Board Letter No.2020/Rs(G)/779/ 2 Dtd. 12/06/20 And 2015/Rs(G}/779/5(Vol.L) Dated 24/09/2020 & 2024/Rs(G)/779/3(E 3464799) Dt.25.06.2024 For Public Procurement (Preference To Make In India) 3 Please Enter The Percentage Of Local Content In The Material Being No Yes Allowed Oï¬€Ered. Please Enter 0 For Fully Imported Items, And 100 For Fully (Optional) Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Inspection By Tpi Agency At Oems Premises . Firm To Quote Place Of No No Not Allowed Inspection Clearly In Their Oï¬€Er So As To Enable This Oï¬Ƒce To Incorporate Place Of Inspection In Po.The Machine Shall Be Inspected And Tested During Diï¬€Erent Stages Of Its Manufacture Starting From Raw Material Till The Completion Of Machine As Per Annexure-I (Qap) Attached For Reference. Page 3 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 2 The Machine Shall Be Inspected And Tested During Diï¬€Erent Stages No No Allowed Of Its Manufacturing Starting From Raw Material , By The Purchaser (Mandatory) Or His Authorized Representative (Tpi) At The Suppliers Or His Sub- Suppliers Works For Which Bidder Has To Submit Qap Incorporating The Tests Along With Stage Inspections For The Tender Items And Tpi Will Carried Out Inspection At Manufactures Works As Per The Qap (Quality Assurance Plan) 3 Evaluation Criteria: 1) The Inter-Se-Position Of All Oï¬€Ers Received No No Not Allowed Will Be Decided On Total Value Of Tender Quoted By The Firm. 4 Road Delivery : In Case Of Road Delivery, The Date Of Delivery At No No Not Allowed Destination (Consignees End) Shall Only Be Treated As Delivery Date Irrespective Of F.O.R./F.O.T. Condition Mentioned Elsewhere In The Contract/ Tender. 5 Performance/Bank Guarantee: As Per Clause 0600 Of No No Not Allowed Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 6 Warranty / Guarantee Period:As Per Clause 1200 Of No No Not Allowed Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 7 Neft/Rtgs/Ecs Payment:As Per Clause 2900 Of Instructions To No No Not Allowed Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 8 Gst Compliance:-As Per Clause 0906 Of Instructions To Tenderers No Yes Allowed And General Conditions Of Tender Indigenous Version 14 Of June (Optional) 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 9 Security Deposit (Sd): 1.0 All Successful Tenderer Shall Deposit No No Allowed Security Deposit (Sd) Amount @5% Of Contract Value Rounded Oï¬€ To (Optional) Nearest Higher Rs.10, Subject To Maximum Rs. 50 Lakhs For Contract Value Up To Rs 50 Cr. In Case Of Contract Value Above Rs 50 Cr. Sd Will Be Rs 1 Cr. 2.0 There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Following: I. The Contract Value Up To Rs.25 (Twenty Ï¬Ve) Lakhs. Ii. Other Railways And Government Departments. Iii. Indian Ordnance Factories. Iv. Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them. V. In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued. Vi. Kvic And Acash For Items Supplied By Them. Vii. Vendors Registered With Railways For The Trade Group Of The Item Tendered For Orders Valued Up To Their Monetary Limit Of Registration. Viii. Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core, Subject To Approval Status Being Valid On The Date Of Tender Closing. Ix. Vendors Registered With Railways For Supply Of Medicine, Medical Equipments And Consumables For These Items. 3.0 Security Deposit (Sd) Shall Remain Valid For A Period Of 60Days, Beyond The Date Of Completion Of All Contractual Obligations. 4.0 Sd From Successful Tenderer Should Be Received In Purchase Oï¬Ƒce Within 21 Days From The Date Acceptance Letter Issued By Purchaser. In The Event Of Successful Tenderer (S) Failing To Deposit/Submit Sd In Acceptable Form Within The Prescribed Period As Aforesaid, The Emd Submitted By Such Successful Tenderers Shall Be Automatically Adjusted Towards Sd. In Case Where Available Emd Amount Is Less Than Required Sd And The Successful Tenderer Does Not Deposit The Balance Sd Amount Within Stipulated Time, Then Emd Shall Be Forfeited And Case Be Dealt With As That Of Withdrawal Of Oï¬€Er By The Tenderer. Page 4 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 10 Security Deposit (Sd): 5.0 Wherever Sd Has Been Exempted, For No No Allowed Any Reason, And The Supplier Fails To Supply Goods As Per Conditions (Optional) Of Contract, As Amended From Time To Time, Purchaser Shall Have Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By Way Of Penalty, An Amount Equal To Sd Amount, As Would Have Been Applicable If The Contract Was With A Non-Exempted Vendor. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 6.0 Apart From Claiming Damages From Vendors, In Case Of Failure To Comply With The Contractual Obligations, Railways Shall Record Poor Performance Of The Vendors For Taking Suitable Penal Action. 7.0 Sd Can Be Submitted In Following Format: A. Dd In The Name Of Chief Cashier/Wr/Ccg. B. Fixed Deposit Receipt Duly Discharged And Stamped In Favour Of Fa&Cao(S) (Stock Items) Or Fa&Cao(X) (Non Stock Items) Or Fa&Cao(C) Churchgate, Western Railway As The Case May Be. C. Bank Guarantee: In Case Bank Guarantee Is Submitted By Supplier/Contractor, The Same Should Be In The Proper Prescribed Format For Bg As Per Annexure Available On Web Site Www.Ireps.Gov.In Website Link Western Railway/Pcmm. The Stamp Duty Shall Be @Rs.5/- Per Thousand Or Part Thereof For The Amount Secured For Such Deed. The Title Holder Of The Bg Shall Be President Of India Acting Through The Pfa/Ccg.8.0 Risk Purchase Clauses Shall Not Be Applicable. 11 All The Conditions Of Nit Are Available On Ireps Web Site. No No Not Allowed 12 Mse Clause:- (A) (I) Mse Participating In The Tender As Stipulated At No No Allowed Para (B) Below , Will Be Exempted From Payment Oï¬€ Earnest Money. (Optional) (Ii) In Tenders Participating Mses, As Para (B) Below Quoting As Price Within Price Band Of L-1 + 15% Shall Be Allow To Supply A Portion Of The Requirement By Bringing Down Their Price To L-1 Price In A Situation Where L-1 Price Is From Someone Other Than Mse And Such Mses Can Together Be Ordered Upto 25% Value Out Of The Net Procurement Quantity. (B) (I) Mses, Who Are Interested In Availing Themselves Of These Beneï¬Ts, Will Enclosed With Their Oï¬€Er A Copy Of Udyam Registration Certiï¬Cate Only. Mse Beneï¬Ts Will Not Be Admissible Based On Any Other Document. (Ii) Further, As Per Gazette Notiï¬Cation Dt.18.10.2022, Incase Of An Upward Change In Terms Of Investment In Plant And Machinery Or Equipment Or Turnover Or Both, And Consequent Re-Classiï¬Cation, An Enterprise Shall Continue To Avail Of All Non- Tax Beneï¬Ts Of The Category (Micro Or Small Or Medium) It Was In Before The Reclassification, For A Period Of Three Years From The Date Of Such Upward Change. All Mses Shall Be Eligible For Beneï¬Ts Of Public Procurement Policy Irrespective Of Product Category Under With Mses Are Registered. However, Traders/Authorized Dealers Will Not Be Eligible For Such Beneï¬Ts. (Iii)The 25% Quantity Shall Be Considered To Mse Including Quantity For Women Owned Mses & For Sc/St Owned Mses As Per Extant Rules And Only Be Considered If Valid Certiï¬Cate Issued By Nominated Agencies Is Uploaded Along With Oï¬€Er. If Documents Are Not Uploaded This Beneï¬T Will Not Be Given Totenderer. Only Oem/Manufacturers Will Be Given Beneï¬T Of Mse, Trader/Authorised Dealer Are Excluded From The Purview Of This Policy 13 Land Border Condition (A): Attention Of The Bidders Is Drawn To Yes Yes Allowed Special Conditions Regarding Restrictions On Procurement From A (Mandatory) Tenderer (Bidder) Of A Country, Which Shares A Land Border With India, Attached With This Tender.Bidders Should Note That Compliance To Land Border Condition (B) Of This Tender Schedule Is Mandatory. Bidders Are Required To Attach Evidence Of Valid Registration, If Applicable To Them. Non-Compliance Shall Result In Summary Rejection Of Their Oï¬€Er. Any False Declaration And Non- Compliance Of The Above Would Be A Ground For Immediate Termination Of The Contract And Further Legal Action In Accordance With The Laws. 14 Land Border Condition (B) : I Have Read And Understood Special Yes Yes Allowed Conditions Regarding Restrictions On Procurement From A (Mandatory) Tenderer(Bidder) Of A Country, Which Shares A Land Border With India, Attached With This Tender. I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered, With The Competent Authority. I Hereby Certify That This Bidder Fulï¬Ls All Requirements In This Regard And Is Eligible To Be Considered. Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached. Page 5 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 Special Conditions S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 Special Instructions For Machinery & Plant (M&P) Items : As No No Not Allowed Per Clause 3900 Of Instructions To Tenderers And General Conditions Of Tender Indigenous Version 14 Of June 2024 Or Latest With All Corrigendums And Amendments, If Any, Issued Before The Tender Closing. 2 Delivery Terms: 1) Dispatch Of The Machine: The Supplier Should No No Not Allowed Normally Dispatch The Machine Only After The Foundation Is Ready For Installation And Commissioning Of The Machine On Arrival. General Arrangement, Foundation & Related Drawings Of Machine Will Be Sent By The Firm To The Consignee Before Supply Of Machine For Approval Of Approving Oï¬Ƒcer Of Consignee. 2) Mode Of Dispatch/Delivery: The Supplier Shall Be Responsible For Transportation, Unloading Of The Equipment On Receipt And Its Movement To The Site Of Installation Including Provision Of Road Mobile Crane, Forklift Etc. 3 Marking: Materials Are To Be Invariably Stamped With No No Not Allowed Manufacturers Name, Month & Year Of Manufacture As May Be Detailed In The Drawing/Speciï¬Cation Of The Material, So That Warranty Can Be Correctly Acted Upon. Technical-Compliances S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 1. The Cost Is Inclusive Of Design, Manufacture, Supply, Erection And No No Not Allowed Commissioning, Bidder May Quote Separately Along With Concomitant Accessories And List Of Tools For Each Machine For Successful Operation Of Machine. 2. Calibration Certiï¬Cate Shall Be Provided For Any Kind Of Gauging/Measuring Instrument Installed On Machine With Validity Of 12 Months From The Date Of Commissioning. 3. Before Starting Of Manufacturing Of Machine It Is Required To Submit General Arrangement Drawing For Approval. 4. Before Dispatch Of Machine The Supplier Has To Complete The Foundation Work ( In No Case Machine Will Be Accepted By Consignee If Foundation Is Not Completed) 5. The Machine Will Not Be Accepted At Consignees Premises Unless The Passed Quality/ Quantity Inspection Certificate Of Rites/Inspection Agency Is Produced. 2 Bidders Are Required To Submit Complete Details Including Values, No No Allowed Write-Up, Drawings, Sketch, Brochure Etc. As Per Requirement (Mandatory) Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical Oï¬€Er Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance Undertakings S.No. Description Confirmation Remarks Documents Required Allowed Uploading 1 1) Price Variation Clause:- Not Applicable. 2)I/We Agree To Supply The No No Not Allowed Tendered Stores At The Rates Quoted By Me/Us In Accordance With The Conditions Mentioned In This Tender & Its Documents And Conditions Available On Ireps. 3) I/We Also Conï¬Rm That Rates And Other Ï¬Nancial Terms Quoted In Relevant Columns Of Ï¬Nancial Bid Will Only Be Applicable For Acceptance. Such Terms Quoted Anywhere Else Shall Not Be Considered For Inter-Se Evaluation 6. Documents Attached With Tender S.No. Document Name Document Description 1 5041595.Pdf Itt & Gcc Version 14 June 2024 2 4674190.Pdf Land Border Condition 3 4674206.Pdf Land Border Condition Amendment 4 4911496.Pdf Delivery Schedule 5 5041600.Pdf Revised Irs Conditions Of Contract_Sept 2022 6 5041674.Pdf Bid Document Part Ii 7 5041680.Pdf Annexure-I(Qap) Page 6 Of 7 Run Date/Time: 24/09/2024 15:06:54Stores/Western Rly Tender Document Tender No 11245036 Closing Date/Time 18/11/2024 11:00 8 4674226.Pdf Tpi Condition The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Smm-M ( Ashok Kumar Meena ) , Concomitant Accessories For Dynamic Wheel Balancing Machine As Per Bid Docum Ent Part Ii Attached Below [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Contract Date: Apr 28, 2026 Contract Value : ₹ 50.20 Lakh

Government Departments No of Bidders 1

Maharashtra View Result →

12.

Housing Urban and Rular Development #10803700 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Maharashtra View Result →

13.

Rural Development #10780577 Price Bid

Tender For Concrete Bandhara At Washi Tarfe Devrukh-Boudhwadi Nearby Pwss Well Tal Sangmeshwar, Dist Ratnagiri - 1 Item No1:-Excavation in soil,soft murum, lime,shaduexceeding 1.50 m.in width including depositing the material as dieected with lead up to 15 m.and liftto 1.50 m. including. 2 Item No2:-Excavation in soft rock exceeding 1.50min widthincluding depositing the excavated naterial as directed with lead upto 15 m and lift upto 1.50m including dressing 3 Item No3:Excavation in hard rock exceeding 1.50m in width by blasting including depositing the excavated naterial as directed with lead upto 15 m and lift upto 1.50m includingdressing (This includes boulders of size more than 0.10 cum under other items) 4 Item No4:Providing and laying in situ cement concreteof grade M 15 ( Below 40 MSA ) of trap/ and bedding, compacting and curing, including Royalty of material etc. completestrength etc lifts including testing of concrete compressive with all leads and 5 Item No5:Providing & Cutting bending hooking laying in position and laying M S bars for reinforcement ofRCC work as per detailed drawing etc. complete. 6 Item No6:Constructing of embanking for Casing zone withselected material directly from borrow area including transporting the material with all leads and lifts laying in layers , watering and consolidation including royalty ofleveling ,spreading including material etc. complete.( Refilling gap of foundation ) 7 Item No7:Providing and fixing Road junction / Information sign board of size 1.20 m x 0.75 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc. complete. Spec. 8 Item No8:-Straight Needle K.T. Weir Gate-Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includesall materials, Labour charges, machinery 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micronper coat per IS 14177. 9 Contengencies Rs 10 Add GST 18% 11 Add Labour Insurance 12 Add Royalty

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

14.

Drinking Water Supply and Sanitation #10772798 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Rajasthan View Result →

15.

Water Resources and Irrigation #10626416 Price Bid

Augmentation Of Lwss Dharja In Gp Shamror Tehsil And Distt Solan Sub Head Laying Of Rising Main And Supply And Erection Of Centrifugal Pumping Machineries With Allied Accessories For Raw Water 1St And 2Nd Stage And Manufacturing Of M_S Shed

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Himachal Pradesh View Result →

16.

Metro Rail #10545528 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Rajasthan View Result →

17.

Educational and Research Institute #10502902 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Tamil Nadu View Result →

18.

Housing Urban and Rular Development #10491584 Price Bid

Theni District - Theni Block - Kottur Panchayat - Supply And Installation Of Machineries Required For Cseb Block, Concrete Block And Brick Manufacturing Unit Rate Contract For The Supply And Installation Of Machineries Required For Cseb Block, Concrete Block And Brick Manufacturing Unit At Kottur At Theni Block In Theni District Under National Rurban Mission Phase Iii 2018-19 , Fully Automatic Heavy Duty Fly Ash Brick Making Machine Stationary Type Hydraulic Opeareted With 10Hp Power Pack, Cooler, Plc Based Panel Board And All Concern Accessories ( 12 Bricks / Stroke, 1440-1800 Nos / Hour ) , 500 Kg Pan Mixer To Mix The Raw Material ( 20 Hp Motor ) , Hydraulic Pallet Truck ( Capacity 500 Kg ) , Wheel Barrows , 20 Feet Conveyor With Gear Box And Accessories , Designer Tiles / Paver Block Making Machine With 2Hp Vibrator Motor Stand Type , 250 Kg Color Mixer Muller Machine With 3Hp Branded Motor , 350 Kg Concrete Mixer With 5Hp Branded Motor Stand Type , Support Table , Earth Rammer , Paver Cutter , Wheel Barrows ( Trally ) , Rubber Moulds , Gst Amount For Providing Service To Government Contract Works For The Above Construction Works. { Gst Amount Is The Total Gst Amount For Total Overall Quoted Amount Above This Row In Column Bb For All Works In This Package }

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

19.

Housing Urban and Rular Development #10373373 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 10

Uttar Pradesh View Result →

20.

Educational and Research Institute #10372706 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

21.

Rural Development #10370743 Price Bid

Providing Following Materials For Work Constructing Mini Kt Weir Gut No 92 Khar Odha Kansewadi At Chikhalthanwadi Tal Shrigonda Dist Ahmednagar , Providing Following Materials For Work Constructing Mini Kt Wair Gut No 92 Khar Odha Kansewadi At Chikhalthanwadi Tal Shrigonda Dist Ahmednagar , Itemno.1:- Excavation In All Kinds Of Soil & Soft Murum Including Boulders Up To 0.6 M Diameter ( 0.113Cum ) For Canal, Seating Of Embankment, Filter Drains / Catch Water Drains Etc., And Placing The Excavated Stuff Neatly In Dump Area Or For Formation Ofserviceroad / Embankment As Directed Including Cost Of All Materials, Machinery, Labour, Dressing Bed And Sides To Required Level And Profile Etc. Complete With Leads As Below And All Lifts As Directed. A ) For 15 M Lead , Nala Trenching , Item No.2:- Excavation In Hard Murum Including Boulders Up To 0.6 M Diameter ( 0.113 Cum ) For Canal, Seatingofembankment, Filterdrains / Catch Water Drainsetc., And Placing The Excavated Stuff Neatlyin Dump Area Or For Formation Of Service Road / Embankment Including Cost Of All Materials, Machinery, Labour, Dressing Bed And Sides To Required Level And Profile Etc., Complete With Leads As Below And All Lifts As Directed. A ) For 15 M Lead , Itemno.3:-Excavationinsoftrockwithoutblasting Including Boulders Up To 0.6 M Diameter ( 0.113 Cum ) For Canal, Seating Of Embankment, Filter Drain / Catch Water Drains Etc., And Placing The Excavated Soft Rock Neatly In Dump Area Or For Formation Of Service Road Includingcostof All Materials, Machinery, Labour, Dressing Bed & Sides To Required Level And Profile Etc.Complete With Leads As Below And All Lifts As Directed. A ) For 15 M Lead , Itemno.4:-Excavation Inhardrock Of All Toughness Byblastingincludingbouldersabove0.6M Dia. ( 0.113Cum ) Minimizingdamagetosideslopesof Excavationinwaterprism Areabyadoptinganyone Orcombinationoflinedrilling / Pre-Splitting / Smooth Blastingtechniquesandplacingtheexcavatedrock Neatlyinapproveddumpareaincludingcostofall Materials, Machinery, Labour, Levelingbedetc., Complete With Leads As Below And All Lifts As Directed. A ) For 15 M Lead , Providing And Fixing In Position Tmt- Fe - 500 Bar Reinforcementofvariousdiametersforr.C.C.Pile Caps, Footings, Foundations, Slabs, Beamscolumns, Canopies, Staircase, Newels, Chajjas, Lintelspardis, Copings, Fins, Archesetc.Asperdetaileddesigns, Drawingsandschedules.Includingcutting, Bending, Hooking The Bars, Binding With Wires Or Tack Welding And Supporting As Required Complete As Directed. , Item No. 31:- Providing And Laying In Situ Cement Concrete Of Gradem-15Oftrap / Granite / Gneiss / Quartzite / Graded Metal Forpcc With Or Without Surface Reinforcement / Rcc Concreting Requiring Heavy Or Special Type Of Shuttering For Works Of Gallery, Sluice, Spillway Crest, Spillway Downstream Face, Energy Dissipating Structures, Intake Structures, Training Walls, Piers, Abutments Etc. With Concretemixer Withshutteringandscaffolding, Placing, Compacting, Curing With An Initial Lead Of 1 Km And All Lifts Etc. Complete As Directed. ( A ) M-15 ( 20 Msa ) ( Cement 5.64 Bags / Cum ) , Item No.118A:- Straight Needle K.T. Weir Gate-Manufacturing- Manufacturing With Qap & Fabrication Of Kt Weir Needle Gates - Traight Typesize2.15X0.5M-94Kg.Weightasper Relevant Indian Standards With All Material, Mildsteelconfirmingtois2062, Rubber Seal Confirming To Is 4623 & Weldingelectrodes Aws E6013for General Weld Joints. It Includes All Materials, Labour Charges, Machinery Charges, 1Km Lead Charges Of Transportation, Loading And Unloading Charges Of Gate Parts At Site, Inspection & Quality Control Charges, Sand Blasting, Painting With One Coat Of Zinc Rich Primer On Dry Film To Give Total Dry Film Thickness 70 + / - 5 Microns And 2 Coats Of Sloventless Coal Tar Epoxy Paint Applied To Give Minimum Dry Film Thickness Of 150+ / - 5 Micron Per Coat As Per Is 14177. , Providing And Fixing In Position M.S.Channel 150*75 Mm 14.4 Kg / M As Per Design & Drawing Including All Labour Etc , Providingandfixingcanalinformationboardof 1.2X0.75Mpreparedon16gaugem.S.Sheet Withangleironframeofsize35x35x3mmwith Cross Bracing Of Size 25X25x3 Mm Including Paintingwithonecoatofzincchromatestoring Primerandtwocoatseachofgreen / Whiteback Ground And Back Side Grey Store Enameled Bonded With Red Retro Reflective Sheet Engineering Grade, Border / Letters / Numeral / Arrowscoatedwithnon-Pealablecrystalclear Protectivetransparentcoatretaining100% Reflectionincludingtwoangleironpostofsize 50X50x5mmof3.65Mlonginflatedatbottom Drilledontopandpaintedinwhiteandblack Bonds Of 30 Cm With Four Numbers High Strength Ofg.I.Boltsandnutsofsize10mmdia.And20 Mmlongsheetandangleironpostinonepiece Without Joints Including All Taxes, Conveying, Fixing In Ground With Cement Concrete In M-15 Block Of Size 60X60x75 Cm As Directed.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

22.

Housing Urban and Rular Development #10370604 Price Bid

Tender For Miscellaneous Work In Govt. Ornate Garden At Aliganj, Lucknow COST OF PATHWAY TRACKING COST OF CHAIN LINK FANCING COST OF MS GATE (2 Nos) COST OF BOUNDARY WALL COST OF SUBMERSIBLE PUMP Pathway - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains. (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kind of Soil Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (2)With material conforming to Grade-ll (size range 53 mm to 0.075 mm) having CBR Value-25). Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm) Chainlink – Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement, Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade Earth excavation work for foundation upto 1.50 mtr. Depth and 30 mtr. lead complete. Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting. RCC work with cement approved coarse sand and 2cm gauge approved stone ballast in proportion 1:1%:3 in lintals of door and windows, excluding its fixing and binding of steel and including necessary centering & shuttering etc. and also i/c S/o material required for proper completion of work. Binding wire to be supplied by the contractor free of cost. (In Column) Support GATE 3.00X3.00M (2 Nos) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. all kind of soil Providing and laying of PCC 1:4:8 grade in foundation & pilnth with proper compecting. Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 154 coarse sand (zone-ill): 3 graded stone aggregate 20 mm Upto Plinth Beam in footing in Column upto plinth Above Plinth Beam a) in Column Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete Columns, Pillars, Piers, Abutments, Posts and Struts Providing & Laying of steel reinforcement i/c cutting, bending, placing and binding with wire complete 12 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand FM not less then 1.25) Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm) Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in- charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium shee including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer- incharge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment), BOUNDARY WALL: Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50m lead as per direction of engg-in-charge. in Cement Dismantling steel work manually/by mechanically means in built up sections without dismembering and stacking within 50m lead as per direction of engineer in charge. Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. cement mortar 1:4 (1 cement: 4 coarse sand) Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1) cement: 4 coarse sand) Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 kg/10 sqm) Painting with synthetic enamel paint of approved brand and manufacture to give lan even shade: Two or more coats on new work Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.1. clips to retain horizontal, including necessary bolts or 6 nos of G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in- charge, with reinforced barbed tape(R.B.T.)/Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (cost of M.S. Jangle, C.C. blocks shall be paid separately) TOTAL COST OF BOUNDARY REPAIRING WORK Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre below ground level. 300 mm dia Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to 15: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in- charge. 100 mm nominal size dia Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm Nominal Size dia Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge. Development of tube well in accordance with IS: 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, l/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in- charge. Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm Dia Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part 1), including necessary bolts & nuts of required size complete. 100 mm clamp Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per 15:2800 (part 1). 100 mm Dia Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm nominal size dia Electric logging of bore hole Supply and Installation of 1.5 HP Submersible pump set complete

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Uttar Pradesh View Result →

23.

Defence #10335556 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Rajasthan View Result →

24.

Tourism #10301450 AOC

Contract Date: Jun 12, 2026 Contract Value : ₹ 3.82 Crore

Government Departments No of Bidders 2

Goa View Result →

25.

Educational and Research Institute #10293210 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Private Organizations No of Bidders 2

Gujarat View Result →

26.

Drinking Water Supply and Sanitation #10284414 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Jammu And Kashmir View Result →

27.

Drinking Water Supply and Sanitation #10284412 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Jammu And Kashmir View Result →

28.

Drinking Water Supply and Sanitation #10284404 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Jammu And Kashmir View Result →

29.

Public Administrative Department #10251157 Price Bid

Providing Paver Block Road At Sapputhaikkal Street And Construction Of Strom Water Drainage At Poonga Nagar In Thittachery Town Panchayat , Ordinary Soil Ss20a Earth Work Excavating And Depositing On Bank With Initial Lead Of 10M And Initial Lift Of 2 M In M-Sand, Silt Or Other Loose Soil, Wet Sand Or Silt Not Under, Light Black Cotton Soil Sandy Loam And Ordinary Soil Including Excavated Earth Ss.20.A Morth No.301 , Cement Concrete Of Mix 1:4:8 (One Cement Four And Eight Aggregates) Using 40Mm Gauge Hard Broken Including Cost Conveyance Of All Materials To Site Including Labour Charges, Transporting And Placing In Position Including Shoring, Strutting Forming Protective Bunds, Cofferdams Bailing Out Of Water Labour For Mixing Compacting, Finishing And Curing, Working At Depths, Tools And Plants And Incidental Charges Such As Sheeting, Shoring And Bracing And Their Subsequent Removal Etc., Complete As Per Standard Specification. , Supplying & Erecting Centering For Sides & Soffiots Including Necessary Supports & Strutting Upto 3.29M Height For Plane Surfaces In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60Cm & 10 Gauge Stiffened, Welded With Steel Angle Of Size 25 X 25 X 3Mm For Boarding Laid Over Silver Oak Joists(Country Wood) Of Size 10 X 6.5Cm Spaced @ About 90Cm C/C And Supported By Casurina Props Of 10 - 13Cm Dia. Spaced @ 75Cm C/C Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. Rate For 10M2.For The Following Items.(Rcc Floor Slab, Roof Slab, Rectangular/ Square, Tee/ Ell Beams, Lintels, Staircase Waist Slabs, Landing Slabs, Landing Beam, Portico Beam Etc., ). , Grade Beam , Supplyingandfabrication Of Steel And Placing In Position Ms / Ribbed Tor Steel Grills For Rcc Works As Per Design Given Including Cost Of Steel And Gi Binding Wire In Floors Etc,. Complete Complying With Standard Specification In Force And As Directed By Department Officials.- , Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg/ Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About (5.0Cum), 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About (3.3 Cum), 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About (4.79Cum) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials) - , Plain Cement Concrete 1:2:4 (One Cement, Two Crushed Stone Sand (M- Sand) And Four Coarse Aggregates) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Chargesetc., Complete As Per Standard Specification , Providing Granolithic Floor Finish Of The Following Thickness With Plain Cement Concrete 1:2:4 (One Cement, Two M.Sand And Four Aggregate) Using 10 To 12Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl, Thread Lining, Curing Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. (The Rate Is Inclusive Of Necessary Planking For Panellingwherever Necessary And As Directed By The Departmental Officers) 40Mm Thick , Providing And Laying, Spreading And Compacting Graded Stone Aggregates To Wet Mix Macadam To A Required Thick Specification Including Premixing The Materials With Water At Omc In Mechnanical Mix Plant Carriage Of Mixed Material By Tipper To Site Laying In Uniform Layers With Pavers In Sub Base/Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Acheive The Desired Density Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete As Per Clause 406 Of Morth Rev-5 , Supplying And Laying Of Interlocking Paver Block Stone 63Mm Thickover A Base Layer Ofstone Dust Filling Incl. Cost Of Materialslaying And Labour Charges Etc Complete Complying With The Standardspecification And As Directed By The Departmental Officers , Manufacturing, Supplying And Fixing Precast Reinforced Cement Concrete Slabs Of Following Thickness In Rcc 1:11/2:3 (One Cement, One And Half Sand And Three Aggregates), Using Following Hbgs Jelly Including Cost Of Reinforcement Steel In Position But Including Cost Of Moulding Charges, Casting Of Slab, Finishing, Curing And Fixing In Position In All Floors Etc., Complete Complying With Standard Specification And As Directed.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

30.

Educational and Research Institute #10241569 Price Bid

supply of Machinery And Equipment Of Cnc Machining Trade , Schedule 1(Cnc Machines) , Cnc Tool Room Lathe/Cnc Turning Center , Vertical Machining Center With 4Th Axis , Schedule 2 (Cnc Software) , Cnc Simulator , Vmc Simulator , Cnc Simulation Software , Computer Aided Manufacturing Software

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Chandigarh View Result →

31.

Drinking Water Supply and Sanitation #10236715 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Rajasthan View Result →

32.

Housing Urban and Rular Development #10235078 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Tamil Nadu View Result →

33.

Public Administrative Department #10224642 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Trust & NGO No of Bidders 2

Tamil Nadu View Result →

34.

Housing Urban and Rular Development #10213638 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Tamil Nadu View Result →

35.

Drinking Water Supply and Sanitation #10209924 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Jammu And Kashmir View Result →

36.

Power #10207637 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

Tamil Nadu View Result →

37.

Housing Urban and Rular Development #10204751 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Tamil Nadu View Result →

38.

Housing Urban and Rular Development #10200585 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

39.

Power #10172978 AOC

Contract Date: Apr 23, 2026 Contract Value : ₹ 21.94 Lakh

Government Departments No of Bidders 3

Uttar Pradesh View Result →

40.

Rural Development #10171950 Technical Bid

Tender For Ktw Parsoda Tq.Vaijapur Dist.Chhatrapati Sambhajinagar - Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials, machinery. labour, dressing bed and sides to required level and profile etc. with 15m. lead and 6 m. lift. 2 Item no.2: Excavation in hard murum including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 15 m lead and 6 m. lift. 3 Item no.3: Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 15 m lead and 6 m. lift. 4 Item no.4: Providing and fixing in position TMT-FE-500 bar reinforcement steel of various diameter for R. C. C. pile, caps, footing, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintel, pardies, copings, fins, arches etc as per detailed design, drawing and schedules. Including, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete as directed. 5 Item no.5: Providing and laying in situ cement concrete of grade M. 150 (40 MSA) of trap/granite /gneiss/quartzite graded metal for PCC with or without surface reainforcement/ RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structurs, intake structurs, training walls, piers, abutment etc. with cement concrete mixer with shuttering and scaffolding, curing with an initial lead of 1 km. and all lifts etc, completed as directed. 6 Item no.6: Back filling upto ground level behind the ground level behind the canal structures etc. completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structeur etc. completed 7 Item no.7: Straight Needle K. T. weir Gate-Manufacturing with QAP & fabrication of K. T. weir needle gates- straight type size 2.15 x 0.50 M-94 Kg. weight as per relevent Indian Standard with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, labour charges, machinery charges, 1 km lead charges of transportation, including loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/-5 micron and 2 coats of sloventless coal tar epoxy paint applied to give munimum dry film thickness of 150+/-5 micron per coat as per IS 14177 8 Item no.8 Providing and fixing canal information board of size 1.20 x 0.75 m. prepared on 16 mm guage M. S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromite storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/ numeral arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement in M-15 block of size 60 x 60 x 75 cm as directed

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

41.

Educational and Research Institute #10140471 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 5

Tamil Nadu View Result →

42.

Public Administrative Department #10124737 Price Bid

Manufacturing And Supply Of Essential Spare Parts For Maintenance Of Machineries At Fabrication Shop-Ii.-1 Dead Centre Lathe 2 Right Hand Cutting Tool ( Size 4040 ) 3 Tool Bit ( 3 / 4X6, Grade S400, T42 ) 4 Tool Bit ( 5 / X6, Grade, S400, T42 ) 5 Tool Bit ( 1 / 2X6, Grade, S400, T42 ) 6 Left Hand Cutting Tool ( Size 4040 ) 7 Boring Tool ( Size 120 / 121 )

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

West Bengal View Result →

43.

Educational and Research Institute #10088358 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Tamil Nadu View Result →

44.

Housing Urban and Rular Development #10066879 Price Bid

Supply And Installation Of Cotton Gloves Manufacturing Machineries With All Accessories01.Supply And Installation Of Cotton Gloves Manufacturing Machineries With All Accessories – 1 No Sevaganapalli H / O Sevaganapalli In Hosur Block Krishnagiri District02.Supply And Installation Of Cotton Gloves Manufacturing Machineries With All Accessories – 1 No Thalapalli H / O Belathur In Hosur Block Krishnagiri District

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Tamil Nadu View Result →

45.

Housing Urban and Rular Development #10066874 Price Bid

Supply And Installation Of Paver / Solid Block Manufacturing Machinery With All Accessories 01.Supply And Installation Of Paver / Solid Block Manufacturing Machinery With All Accessories – 1 No At Thalapalli H / O Belathur In Hosur Block Krishnagiri District

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Tamil Nadu View Result →

46.

Drinking Water Supply and Sanitation #10030676 Technical Bid

Tender For E-Quotation For Seeking Firm Rates Of Plant & Machinery And Materials Category Items For Preperation/Amendment Of Schedule Of Rate For The Year 2026.- M 1055 - Pumpssupplying Submersible Pump Sets Confirming To Is 8034 And Motor Confirming To Is 9283. Pump Shall Be Suitable For Various Delivery Head And Discharge With Stainless Steel Pump Shaft And Polypropylene/ Noryl Impeller. Motor Suitable For Working On 415V+10%, 3Ph, 50 Hz, A.C. Supply With Cable Guard, Thrust Carbon/ Fiber Bearing To Withstand Entire Hydraulic Thrust, Water Proof Winding Shall Be Provided. The Pump Set Shall Be Suitable For Direct Coupling. Pump Shall Have Suitable Outlet As Per Manufacturers Design. Anti Thrust Stream Lined Non Return Valve Shall Be Provided With Pump. 3 Meter Submersible Copper Conductor Cable In Single/ Double Run Shall Be Provided With Each Pump. Submersible Pump Set 100 Mm Dia (With Polypropylene/ Noryl Impeller) Up To 20 Stages1 H.P. 1.5 Hp 2.5 Hp 3.0 Hp 4.0 Hp 5.0 Hp Submersible Pump 150 Mm Dia (With Bronze/Ss Impeller) Up To 8 Stages 1.5 Hp 2.0 Hp 3.0 Hp 4.0 Hp 5.0 Hp 6.0 Hp 7.5 Hp M 1056 - Pressure Guageproviding Fabricating, Testing And Commisioning Pressure Vessel Fabricating In M.S Plate On Providing Foundation Including Epoxy Paint Pressure Gauge (100 Mm Dia) Pressure Gauge (150 Mm Dia) Vacuum / Combination Gauge M 1057 - Lifting Equipmentchain Pulley Blocksupplying Triple Spur Gear Type Chain Pulley Block Suitable For Capacity As Below With 3 M Lift Complete With Load Chain And Hand Chain Suitable For Above Lift, Tested To 50% Over Load As Per Is 3832 Carrying Isi Mark. 20 M 1057 - Lifting Equipmentchain Pulley Blocksupplying Triple Spur Gear Type Chain Pulley Block Suitable For Capacity As Below With 3 M Lift Complete With Load Chain And Hand Chain Suitable For Above Lift, Tested To 50% Over Load As Per Is 3832 Carrying Isi Mark. 21 1 Tonne Capacity 22 2 Tonne Capacity 23 3 Tonne Capacity 24 Electric Operated Circular Or Rectangular Travelling Crane (Single Girder)Supplying Single Girder Electrically Operated Rectangular Over Head Travelling Crane With 6 M Lift Complete With Wire Rope Hoist, Class Ii Duty, All Three Motions Electrically Operated By Suitable Rating Motor Ip 54, Control Panel And Down Pendant Control Block. 25 5 Tonne Capacity 26 Above 6 M Up To 8 M Span 27 Above 8 M Up To 10 M Span 28 7.5 Tonne Capacity 29 Above 6 M Upto 8 M Span 30 Above 8 M Up To 10 M Span 31 10 Tonne Capacity 32 Above 6 M Up To 8 M Span 33 Above 8 M Up To 10 M Span 34 M 1058 - Lightening Arrester, Ab Switch, Insulators M 1058 - Lightening Arrester, Ab Switch, Insulators Lightening Arrestorsupplying, Erecting Approved Make Thyrite Type Lightening Arrestor Suitable For H.T. Supply With Necessary Ancillary Material Complete On Provided Cross Arm And Connected To Overhead Line. Suitable For 11 Kv Supply, Distribution Class Suitable For 22 Kv Supply, Distribution Class Suitable For 33 Kv Supply, Station Class Disc Insulator.Supplying, Erecting Porcelain Disc Type Insulators With Hardware Fittings Suitable For H.T. Overhead Line Complete Erected With Nuts And Bolts On Provided Cross Arm Suitable For 11Kv Line Suitable For 33Kv Line Pin Insulatorsupplying, Erecting Porcelain Pin Type Insulators With Hardware Fittings Suitable For H.T. Overhead Line Complete Erected With Nuts And Bolts On Provided Cross Arm Suitable For 11Kv Line Suitable For 33Kv Line Air Break Switch Without Earth Switchsupplying, Erecting Approved Make H.T. Outdoor Type Gang Operated Air Break Triple Pole Switch Of Required Capacity With 3 Post / Pin Type Insulator Per Phase , Mounted In Horizontal Or Vertical Position On Provided Cross Arm With Adequate Length Of G.I. Pipe For Operating Handle Erected On Extended Square Shaft. The Operating Handle Provided With Lock And Key At Suitable Height From Ground With Necessary Clamps Suitable For 11Kv Line 46 Suitable For 11Kv Line 47 Rocking / Tilting Type 48 Rotating Type 49 Suitable For 33Kv Line 50 Rocking / Tilting Type 51 Rotating Type 52 Air Break Switch With Earth Switchsupplying, Erecting Approved Make H.T. Outdoor Type Gang Operated Air Break Triple Pole Switch With Earth Switch Of Required Capacity With 3 Post / Pin Type Insulator Per Phase , Mounted In Horizontal Or Vertical Position On Provided Cross Arm With Adequate Length Of G.I. Pipe For Operating Handle Erected On Extended Square Shaft. The Operating Handle Provided With Lock And Key At Suitable Height From Ground With Necessary Clamps 53 Suitable For 11 Kv Line 54 Rotating Type 55 Suitable For 33 Kv Line 56 Rotating Type 57 Drop Out Fuse (Channel Mounted)Supplying, Erecting Approved Make Out Door Type Drop Out Fuse Channel Type With Insulator Complete With Fuse Holders Fuse Barrel With Metal Fittings, Fuse Element, With Working Current Up To 50 Amp, Capacity Complete Erected On Provided Cross Arm, Each Set Comprising 3 Units 58 Suitable For 11 Kv Line Suitable For 11 Kv Line Suitable For 33 Kv Line Horn Gap Fuse (Channel Mounted) Supplying, Erecting Approved Make Out Door Type Horn Gap Type Fuse With Insulator, Fuse Element, With Working Current Up To 50 Amp, Capacity Complete Erected On Provided Cross Arm, Each Set Comprising 3 Units Suitable For 11 Kv Line Suitable For 33 Kv Line M 1059 - Transformerpower Transformer (With Off Load Tap Changer) Any Isi Mark Supplying Outdoor Type Copper Wound Transformer Continuously Rated For 3Ph, 50 Hz, At Full Load And Temp. Rise Not Exceeding 45 Degree C By Thermometer In Oil And 50 Degree C By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Dy11, Ht Side Connected In Delta And Lt Side Connected In Star With Neutral Brought Out Connected To Provide Separate Earthing. The Transformer Shall Have Power Terminal Arrangement, Bushing/ Cable End Box On Ht Side And Cable End Box On Lt Side. 2 Nos Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer. The Transformer Should Have Following Standard Fittings. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specifications And The Load & No Load Losses Shall Be Limited To The Values Given Below Or As Per Is Or Norms Issed By Seb Which Ever Are Lower-1. Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge.2. Silica Gel Dehydrating Breather Charged With Silica Gel.3. Oil Drain Valve4. Oil Filter Valve5. Lifting Eyes/ Hooks6. Two Earthing Terminals7. Diagram And Rating Plate8. Air Vent9. Explosion Vent10. 100Mm Dia Thermo Meter With Thermometer Pocket11. Four Bi Directional Plain Roller. Power Transformer 11000/433 Volts With Off Load Tap Changer – 12.5% To +2.5% In Steps Of 2.5% As Per Bis Level-2. 63 Kva 100 Kva 160 Kva 200 Kva 250 Kva 315 Kva 500 Kva 630 Kva 750/800 Kva Power Transformer (With On Load Tap Changer)Supplying Outdoor Type Copper Wound Transformer Continuously Rated For 3Ph, 50 Hz, At Full Load And Temp. Rise Not Exceeding 45 Degree C By Thermometer In Oil And 50 Degree C By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Dy11, Ht Side Connected In Delta And Lt Side Connected In Star With Neutral Brought Out Connected To Provide Separate Earthing. The Transformer Shall Have Power Terminal Arrangement, Bushing/ Cable End Box On Ht Side And Cable End Box On Lt Side. 2Nos Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer. The Transformer Should Have Following Standard Fittings. The Oltc Should Be Suitable For Minimum 50 Operations Per Day. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specifications And The Load & No Load Losses Shall Be Limited To The Values Given Below Or As Per Is Or Norms Issued By Seb Which Ever Are Lower- 1. Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge.2. Silica Gel Dehydrating Breather Charged With Silica Gel.3. Oil Drain Valve4. Oil Filter Valve5. Lifting Eyes/ Hooks6. Two Earthing Terminals7. Diagram And Rating Plate8. Air Vent9. Explosion Vent10. 100Mm Dia Thermo Meter With Thermometer Pocket11. Four Bi Directional Plain Roller.12. Buchholz Relay13. Resistance Temp. Detector14. Marshalling Box15. Automatic Voltage Regulator (Avr)16. Remote Tap Changing Controller (Rtcc) Transformer 11000/433 Volts With On Load Tap Changer – 15% To +5% In Steps Of 1.25% With Rtcc, Avr And Marshalling Box And Other Specification 750/800 Kva 1000 Kva 1250 Kva 1600 Kva 2000 Kva M 1060 - Motorsfoot Mounted Motors Tefc 1500 Rpm Supplying Foot Mounted Tefc 1500 Rpm, Squirrel Cage Induction Motor, Conforming To Is 325 Having Continuous Rating Suitable For Operation At 415 Volts ± 10%, 3 Phase, 50 Hz ± 3% With “F” Class Insulation Temperature Rise Limited To Class “B” Insulation. Motors Conform To Is-12615 With Efficiency Level Ie3 And Provided With Enclosure Protection Class Ip-55. 15 Kw (20 Hp) 18.5 Kw ( 25 Hp) 22 Kw ( 30 Hp) 30 Kw ( 40 Hp) 37 Kw ( 50 Hp) 45 Kw ( 60 Hp) 55 Kw ( 75 Hp) 75 Kw ( 100 Hp) 90 Kw ( 120 Hp) 110 Kw ( 150 Hp) 132 Kw ( 180Hp ) 160 Kw ( 215 Hp ) M 1061 - Aluminium Cablecable - Aluminium Conductor Three Core, Xlpe / Pvc Insulated & Armoured Cable .Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Aluminium Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. 3 Core 2.5 Sq Mm 3 Core 4 Sq Mm 3 Core 6 Sq Mm 3 Core 10 Sq Mm 3 Core 16 Sq Mm 3 Core 25 Sq Mm 3 Core 35 Sq Mm 3 Core 50 Sq Mm 3 Core 70 Sq Mm 3 Core 95 Sq Mm 3 Core 120 Sq Mm 3 Core 150 Sq Mm 3 Core 185 Sq Mm 3 Core 240 Sq Mm 3 Core 300 Sq Mm 3 Core 400 Sq Mm Ht Aluminium Three Core 3.3 Kve Cable Xlpe Insulatedsupplying Ht Aluminium Three Core Cable Xlpe Insulated ,Insulation Screened With Extruded Semi Conducting Compound In Combination With Copper Tape (0.3 Ka For 1 Sec.) Cores Laidup Inner Sheath Of Pvc Tape ,Galvanised Steel Flat Strip Armoured,And Overall Pvc Sheathed Cable Conforming To Is :7098 /Ii/85 With Latest Amendments 3 Core 70 Sq Mm 3 Core 95 Sq Mm 3 Core 120 Sq Mm 3 Core150Sq Mm 3 Core 185 Sq Mm 3 Core 240Sq Mm 3 Core 300 Sq Mm 3 Core 400 Sq Mm M 1062 - Copper Cablecable 3 Core Pvc Insulated, Pvc Sheathed Copper Conductor Flat Submersible Cable .Supplying , Flat Flexible Submersible Cable With, Copper Conductor, Pvc Insulated, And Pvc Sheathed . 3 Core 1.5 Sq Mm 3 Core 2.5 Sq Mm 3 Core 4 Sq Mm 3 Core 6 Sq Mm 3 Core 10 Sq Mm 3 Core 16 Sq Mm 3 Core 25 Sq Mm 3 Core 35 Sq Mm Copper Conductor Three Core, Xlpe / Pvc Insulated & Unarmoured Cable Supplying Xlpe / Pvc Insulated, Unarmoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. 3 Core 1.5 Sq Mm 3 Core 2.5 Sq Mm 3 Core 4 Sq M 3 Core 1.5 Sq Mm 3 Core 2.5 Sq Mm 3 Core 4 Sq Mm 3 Core 6 Sq Mm 3 Core 10 Sq Mm 3 Core 16 Sq Mm 3 Core 25 Sq Mm 3 Core 35 Sq Mm Copper Conductor Three Core, Xlpe / Pvc Insulated & Unarmoured Cable Supplying Xlpe / Pvc Insulated, Unarmoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. 3 Core 1.5 Sq Mm 3 Core 2.5 Sq Mm 3 Core 4 Sq Mm 3 Core 6 Sq Mm 3 Core 10 Sq Mm 3 Core 16 Sq Mm 3 Core 25 Sq Mm 3 Core 35 Sq Mm 3 Core 50 Sq Mm 3 Core 70 Sq Mm 3 Core 95 Sq Mm Copper Conductor 3.5 Core, Xlpe / Pvc Insulated & Armoured Cable .Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark 3.5 Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner 3.5 Core 25 Sq Mm 3.5 Core 35 Sq Mm 3.5 Core 50 Sq Mm 3 .5 Core 70 Sq Mm 3.5 Core 95 Sq Mm

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Jharkhand View Result →

47.

Drinking Water Supply and Sanitation #10015147 AOC

Tender For Emergency Works To Be Carried Out At Mhaisal Lis-Tem No.1-Replacement Of Gland Sleeve Of V.T.Pumps 8.00 Labour Charges For Replacement Of Gland Sleeve Of V.T.Pumps As Per Manufacturers Instruction Manual With All Tools, Tackles, Consumables Such As Gland Packing Etc . This Job Includes Dismatling Of Bearing Housing Assembly, Head Shaft,Reconditioning Of All Parts, Refitting Bearing Housing Assembly, Motor With Alignment Test & Trial At Mhaisal Lis. Stage I- 4 Nos. Stage Ii- 4 Nos. 42839.15 Nos. 342713.20 2.00 Labour Charges For Replacement Of Gland Sleeve Of V.T.Pumps As Per Manufacturers Instruction Manual With All Tools, Tackles, Consumables Such As Gland Packing Etc . This Job Includes Dismatling Of Bearing Housing Assembly, Head Shaft,Reconditioning Of All Parts, Refitting Bearing Housing Assembly, Motor With Alignment Test & Trial At Mhaisal Lis Stage V-2 Nos. 47905.31 Nos. 95810.62 10.00 Gland Sleeve 10464.35 Nos. 104643.50 Item No.2-Replacement Of Damaged Cooling Coil Of V.T. Pumps 2.00 Job Work Of Replacement Of Damaged Cooling Coil Of V.T. Pumps As Per Manufacturers Instruction Manual With All Tools, Tackles, Consumables Such As Gland Packing Etc.This Job Includes Dismatling Of Bearing Housing Assembly, Reconditioning Of All Parts, Refitting Bearing Housing Assembly,Motor With Alignment Test & Trial For 72 Hrs Complete . Stage I- 1 Nos. Stage Ii- 1 Nos. 42839.15 Nos. 85678.30 2.00 Job Work Of Replacement Of Damaged Cooling Coil Of V.T. Pumps As Per Manufacturers Instruction Manual With All Tools, Tackles, Consumables Such As Gland Packing Etc.This Job Includes Dismatling Of Bearing Housing Assembly, Reconditioning Of All Parts, Refitting Bearing Housing Assembly,Motor With Alignment Test & Trial For 72 Hrs Complete . Stage V- 2 Nos. 47905.31 Nos. 95810.62 4.00 Cooling Coil 80593.61 Nos. 322374.43 Item No.3-Labour Charges For Removing & Refitting Of Rubber Expansion Joint With Gasket. 37 4.00 Rej Of1000 Mm 6495.31 Nos. 25981.24 4.00 Rej Of 1200 Mm 10203.02 Nos. 40812.08 30.00 Item No.4-Fabrication & Erection Of Safety Covers For Valve Floor Openings Of Size 810 Mm X 610Mm At Mhaisal Lis Stage I . 2480.00 Nos. 74400.00 30.00 Item No.5-Fabrication & Erection Of Safety Covers For Valve Floor Openings Of Size 300 Mm X 300Mm At Mhaisal Lis Stage I . 761.00 Nos. 22830.00 33.00 Item No.6-Fabrication & Erection Of Safety Covers For Valve Floor Openings Of Size 820 Mm X 510 Mm At Mhaisal Lis Stage Ii . 2257.00 Nos. 74481.00 7 Item No.7-Supply Of Fabricated M.S. Boxes Of Size 2 M X 1 M X 1 M And Sheet 3.15Mm Thickness @ Mhaisal Stage I To V, Dongarwadi & Banewadi. 27790.00 Nos. 194530.00 Item No.8-Job Work Of Repairing Of Butterfly Valve Of 1000 Mm Dia. 10 Labour Charges For Work Of Repairing Of Butterfly Valve(1000 Mm Dia.) As Per Manufacturers Instruction Manual With All Tools, Tackles Etc. This Job Includes Labours Required For Replacing Worn Out/Damaged Spares Like End Cover, Cottor Pin, Shaft Bearing,Drive Stub Shaft Seal,Thrust Face, O Ring Etc. With Satisfactory Test & Trial Etc. P.N-1.0 & 1.6 (Excluding Spare, Lifting Charges Extra As Applicable) @ Mhaisal Stage I & Ii 25165 Nos. 251650.00 10 Labour Charges For Replacement Of Disc Retaining Ri Ng And Disc Seal Of Butterfly Valve(1000 Mm Dia.) Having Pn-1.0 And 1.6 .This Includes Removing And Dismantling Of Disc Seal , Nuts , Bolts , Sundry Material With Machining Process @ Mhaisal Stage I & Ii 28790 Nos. 287900.00 Spares For Butterfly Valve @ Mhaisal Stage I & Ii 1 Nde Shaft 26681.13 Nos. 26681.13 1 De Shaft 35058.00 Nos. 35058.00 8 Dowel Pin 539.87 Nos. 4318.96 8 Keys 1140.99 Nos. 9127.92 8 Flanged Bush 13040.01 Nos. 104320.08 10 U Seal Reataining Bush 797.97 Nos. 7979.70 10 U Seal Reataining Washer 681.19 Nos. 6811.90 10 Bearing Bush 3230.81 Nos. 32308.10 400 Item 9-Transporation Of Material / Bfv From Mhaisal Stage 1&2 Site To Nearest Midc (To And Fro) By Tata 407.( 1 Trip 50 X 2 =100 Km, Therefore For 4 Trips- 400 Km) 25.00 Km 10000.00 Item 10- Repair Work Of Pumping Machinery & Allied Mechanical Equipments @Mhaisal Stage 6A,6B & Agalgaon-Jakhapur And Old & Extended Gavan, Nagewadi & Vajrachounde Lis Etc Manufacturing, Supply, Erection, Of Steel Staircase Arrangement For Eot Crane Repair Works @ Mhaisal 6A, 6B & Agalgaon-Jakhapur Lis. 38 1395.95 Supply Of Steel Of Various Sections As Per Requirement 53.00 Kg 73985.35 1395.95 General Fabrication & Erection For Above Structures By Means Of Marking, Cutting, Welding, Handling, Labour, Workshop Charges, Sundry Material Charges, With Leads & Lifts At Site Etc Complete For Various Types Of Work 35.00 Kg 48858.25 Painting Work 54.78 Providing Supplying And Applying 1 Coat Of Red Oxide To The Steel Structure As A Primary Coat Including Cleaning, Scrubbing For Preparing The Surface To Apply Paint With All Lift Etc Complete As Directed. 199.00 Sq. Mtr 10901.22 54.78 Providing And Applying Anticorrosive Coal Tar Epoxy Paint For In Two Coats Including Surface Preparation, Chipping The Welding, Cleaning Spatters, Dust Etc. Complete As Directed. 355.00 Sq. Mtr 19446.90 Repair Of Kinetic Air Valve For All Bove Site As Per Requirements 4 Supply Of Seasoned Wood With Natural Rubber Coating Small Ball For Kav 3838.00 Nos 15352.00 4 Supply Of Seasoned Wood With Vulcanite Coating Big Ball For Kav 2424.00 Nos 9696.00 4 Seat Ring For Large Orifice Of Kav 808.00 Nos 3232.00 4 Seat Ring For Small Orifice Of Kav 505.00 Nos 2020.00 4 Labour Charges For Repalcement Of Large Orifice / Small Orifice Float, Cover Plate, Seat Ring Of Air Valve /Kinetic Air Valve (On Rising Main Only)/Tamper Proof Air Valve/Surge Supression Air Valve Having P.N -1.0 & 1.6 Rating 893.00 Nos 3572.00 1 Job Work Of Overhauling Of Hsc Pump As Per Manufacturers Instruction Manual With All Tools,Tackles Etc.This Job Includes Labour Charges,Consumables Like Gland Packing,Grease,Sundry Material Etc.This Job Includes Removal Motor From Pump,Dismantling Of All Sub Assemblies Such As Bearing,Stuffing Box,Pipings,Shaft Setc.Reconditioning Of All Parts,Inspection Of All Parts & Replace These Part Sas Per Instructions Of Concerned Authority (Spares Cost Excluded)Refitting Of All Parts & Sub Assemblies.Test & Trial Etc. 6519.00 No 6519.00 2 Job Work Of Replacement Of Damaged Bearing Of Hsc Pump With All Tools,Tackles, Consumables Such As Gland Packing,Grease Etc.This Job Includes Removing Of Motor From Pump,Dismatling Of Bearing Housing Assembly, Reconditioning Of All Parts,Refitting Bearing Housing Assembly,Motor With Test & Trial Complete 4967.00 No 9934.00 1 Job Work Of Removing Of Motor Of Hsc Pump As Per Manufacturers Manual & Refitting It On Pump With Alignment With All Tools,Tackles & Sundry Material 4364.00 No 4364.00 4 Ball Brg No.6306 For Hsc Pump For 20 Hp 914.00 No 3656.00 4 Ball Brg No.6310 For Hsc Pump For 60 Hp 2479.00 No 9916.00 4 Transportation Of All Types Of Spares, Material , Generator Set, Welding Set Required For Repairing Work At All 4 Sites 2512.00 Trips 10048.00

Contract Date: May 21, 2026 Contract Value : ₹ 24.82 Lakh

Government Departments No of Bidders 3

Maharashtra View Result →

48.

Public Administrative Department #9970764 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 7

Maharashtra View Result →

49.

Drinking Water Supply and Sanitation #9970702 Price Bid

Tender for Providing Services Of Heavy Duty Operator, Driver, Helper And Choukidar For Government Machinery Working Under Deputy Engineer, Mechanical Hoist Manufacturing Sub Division, Amravati

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

50.

Defence #9929205 AOC

Contract Date: Jan 06, 2026 Contract Value : ₹ 23.55 Crore

Statutory Bodies & Commissions/Committees No of Bidders 7

Andhra Pradesh View Result →

TenderDetail

Loading tenders