tender for supply of a knock down storage product of overall size 900 mm width x 450 mm depth x 1 200 mm height and provided with two adjustable shelves. the sides and back shall be made f rom 0.6 mm thick crca sheet of is 513: grade cr2, while the top, shelves, bottom and doors s hall be fabricated from 0.8 mm thick crca sheet of is 513: grade cr2. all other components shall be made from 0.8 mm thick crca sheet of the same grade. the cutting and notching of panels shall be carried out using precision sheet laser cutting machines, and the bending of the panels shall be performed on fully automatic panel bender machines with auto loadi ng and unloading systems to ensure accuracy in forming both large and small panels. the hinged doors shall be mounted onto the body with pivot pin-type hinges, incorporating a recess type handle cum lock made of plastic with three-way locking mechanism consists of shooting bolt system to ensure security. shelves shall be adjustable at a pitch of one inch to suit storage requirements, with a uniform distributed load carrying capacity of 40 kg pe r shelf.and the unit shall be provided with four levellers of 15 mm height for proper align ment and stability. all machinery used in the production process i.e laser cutting machines , fully automatic panel bender machines with auto loading and unloading systems and 11-ta nk pre-treatment plant, shall be verified by irclass / rites vendor assessment report .to pr otect against corrosion, all metal components shall undergo an anti-rust surface treatment through an 11-tank pre-treatment process, followed by epoxy polyester powder coating as per required shade with a dry film thickness of 60 to 80 microns for long-lastin g durability and superior finish. the seller / company should be nabcb certified iso-9001:201 5, iso-14001:2015, ohsas-18001:2007, iso-45001:2018, iso-50001:2018 and iso-13485. other certifi cations ul-greenguard gold (with more than 100 products approved), griha, greenpro, india n design mark, fsc, pefc & sedex certified. the bidder should also be a member of bifma since last 18 years and one or more products of the oem should be certified as bifma compliant a s well as bifma level-1(one) certified and an official product link/screenshot of the produ ct listing?s must be provided from www.bifma.org? in each case. warranty: manufacturing defect: 01 year and service warranty: 04 years.