tender for providing material to gp munjewadi for constructing k.t.weir @munjewaadi as per following boq to gp munjewadi, tal.jamkhed, dist.ahilyangar , providing following material , item no. 1 :excavation in all kinds of soils & soft murum including boulder up to 0.6m diameter (0.113cum ) for canal, seating of embankment, filter drain / catch water drain etc. and placing the excavated stuff neately in dump area or for formation of service road/ embankment as directed including cost of all material,labour , dressing bed and sides to the require level and profile etc. complete with all leads 15.0m and lifts 6.0m as per specification. , item no. 2 :excavation in hard murum including boulder up to 0.6m diameter (0.113cum ) for canal, seating of embankment, filter drain / catch water drain etc. and placing the excavated stuff neately in dump area or for formation of service road/ embankment as directed including cost of all material,labour , dressing bed and sides to the require level and profile etc. complete with all leads 15.0m and lifts 6.0m as per specification. , item no. 3 :excavation in soft rock without blasting including boulder up to 0.6m diameter (0.113cum ) for canal, seating of embankment, filter drain / catch water drain etc. and placing the excavated soft rock neately in dump area or for formation of service road/ embankment as directed including cost of all material,labour , dressing bed and sides to the require level and profile etc. complete with all leads 15.0m and lifts 6.0m as per specification. , excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia.(0.113cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling/pre-splitting/smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, leveling bed etc., complete with lead up to 15 m and lift up to 6 m. , providing and laying in situ cement concrete of grade m-15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with concrete mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.(a) m-15 (20 msa) (cement 5.64 bags/cum) , providing fabricating and placing in position reinforcement steel for reinforced cement concrete work including cutting, bending, hooking, laying in position and tying m.s./ hysd / tmt bars for reinforcement of as per detailed drawing etc. complete as directed. . , providing and fixing straigh needle k.t.weir gate-manufacturing - manufacturing with qqp & fabrication of kt weir needle gate-straight type size 2.15 x 0.5m-94 kg. weight as per relevant indian standards with all metrial, mild steel confirming to is 2062, rubber seal confirming to is 4623 & welding electrodes aws e6013 for general weld jonints, it includes all material, labour charges, machinery charges, j km lead charges of transportation, loading and unloading charges of gate parts as site, inspection & qulity control charges, sand blasing, painting with one coat of zinc rich primer on dry film to give total dry film thickness 70 + -5 microns and coats of sloventless coat tar epoxy paint applied to give minimum dry film thickness of 150+-5 micron per coat as per is 14177. , providing & fabricating structural steel work in rolled section like joist, channels, angles, tees tec. as per detailed disign & drawing including fixing in pisition without anti corrosive paint &over it two coat of oil paint of approved quality and shade etec.complete. , providing and fixing canal information board of 1.2 x 0.75 m prepared on16 gauge m.s. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet engineering grade, border/ letters/ numeral/ arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of g.i. bolts and nuts of size10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in m-15 block of size 60 x 60 x 75 cm as directed by engineer- in-charge. , nala degradation