View Bid Results For Excitation System Tenders

We found 329 Bid Results related to excitation system tenders. You can find Contractor details who won excitation system tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–7 of 329 tenders matching your filters

Agriculture #11475879 Technical Bid

Tender For Motor Rewinding Work- 1 Electric Motor Rewinding Insulation Class- B0.5 Hp, 720, 960, 1440, 2900 Rpm Stator 2 0.75 Hp, 720, 960, 1440, 2900 Rpm Stator 3 1.00 Hp 720, 960, 1440,2900 Rpm Stator 4 2.00 Hp 720, 960, 1440,2900 Rpm Stator 5 3.00 Hp 720, 960, 1440,2900 Rpm Stator 6 5.00 Hp 720, 960, 1440,2900 Rpm Stator 7 7.5 Hp 720, 960, 1440,2900 Rpm Stator 8 10 Hp 720, 960, 1440,2900 Rpm Stator 9 11.5 Hp 720, 960, 1440, 2900 Rpm Stator 10 12.5 Hp 720, 960, 1440, 2900 Rpm Stator 11 15.00 Hp 720, 960, 1440, 2900 Rpm Stator 12 20 Hp To 120 Hp, 720, 960, 1440, 2900 Rpm Stator 13 Rotor 14 Rewinding Of Crane Duty Motor 15 Hp, 960 Rpm, Insulation Class- H Rotor 15 Stator 16 25 Hp, 960 Rpm, Insulation Class- H Rotor 17 Stator 18 Slipring Motor75 Hp, 1440 Rpm, Squral Cage Rotor Of Alluminium Binding Converted Into Copper Strip Binding And Dynamic Balancing With Certificate. 19 120 Hp To 250 Hp, 960,1440 Rpm Strip Binding Rotor 20 Stator 21 250 Hp, 585 Rpm, Strip Binding Rotor 22 Stator 23 265 Hp, 960 Rpm, Strip Binding Rotor 24 Stator 25 400 Hp, 720 Rpm, Strip Binding Rotor 26 Stator 27 Rewinding Of Cane Unloader Motor S-5 Duty 415 Volt15 Hp, 965 Rpm , 900 Starts/Stop Per Hour Rotor 28 Stator 29 25 Hp, 965 Rpm , 900 Starts/Stop Per Hour Rotor 30 Stator 31 Three Speed Motor Insulation Class - Fcentrifugal Motor 110 Kw Ac 1St Speed Upto 200 Rpm 32 2Nd & 3Rd Speed Upto 450 Rpm & 960 Rpm 33 Dc-Motor D-412 Kcp Centrifugal Machine 167 Kv, 1250 Rpm Rotor 34 Stator 35 Repair Of Core Assembly For 3 Speed Motor Of Centrifugal Machine 36 Buffing & Policing Of Rotor Commutator Of Dc Motor For D-412 Centrifugal Machine 37 Welding Machine Spares Rewinding Primary Coil 38 Secondary Coil 39 Choke Coil 40 D.C.Welding Machine Rectifier 230/24 Volt, 600 Amp. 41 Rewinding And Repairing Of Electronic Welding Machine 3 Phase 400 Amp. 42 D.G.Set Spares Rewinding166 Kva Alternator Of Dg Set 1500 Rpm, 50Hz, Pole Of Rotor 4 Nos. Complete Rewinding H Class Enamelled Copper Strip With Material And Labour And Dynamic Balancing With Test Certificate Rotor 43 Stator 44 320 Kva Alternator Of Dg Set 1500 Rpm Rotor 45 Stator 46 166 Kva Alternator Set Excitation System (Booster) 47 320 Kva Alternator Excitor Rotor 48 320 Kva Alternator Excitor Filed Coil 49 Rewinding And Repair Of Submersible Pump Motor 15 Hp 50 25 Hp 51 Complete Rewinding Of 1875 Kva Excitor Rotor (Jyoti Make) Of 1500 Kw Alternator With Satisfactory Testing & Trial On Load. 52 Other Rewinding Workbreak Thruster Mootor 53 Cooler Fan Single Speed / Three Speed 54 Exhaust Fan Single Phase / Three Speed 55 Rewinding Of Celling Fan 56 Brass Holder For Turbine Excitor 57 Copper Carbon Brush For Turbine Excitor 58 Repairing Of D.C. Excitor (Jyoti Make) 15 Kw With Packing & Cutting Of Commutator & Re-Soldering Of Lug Etc. Complete 59 Charges For Supply Of Diode Fixing Plate Alluminium For 1875 Kva Turbine Alternator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 3

Uttarakhand View Result →

Educational and Research Institute #11433319 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.12 Crore

Government Departments No of Bidders 1

Telangana View Result →

Power #11386313 Price Bid

Tender for Design, Manufacture, Supply, Installation, Testing And Commissioning Of Excitation System For The 1 X 2.5 Mw Malampuzha Power House Generation Circle Thrissur, Kseb Ltd

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Kerala View Result →

Power #11366553 Technical Bid

Tender for Procurement Of Rectifier Bridge Cooling Fan For Abb Excitation System At = Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

Chhattisgarh View Result →

Housing Urban and Rular Development #11319892 AOC

Contract Date: Jun 19, 2026 Contract Value : ₹ 1.28 Crore

Government Departments No of Bidders 3

Maharashtra View Result →

Housing Urban and Rular Development #11300693 AOC

Contract Date: Jun 17, 2026 Contract Value : ₹ 1.20 Crore

Statutory Bodies & Commissions/Committees No of Bidders 2

Goa View Result →

Petroleum and Natural Gas #11246304 AOC

Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - 9060C26a55 Rprc264060-Annual Maintenance Contract For Preventive; Abb Make Excitation System Of 22Mw Super- Critical Pac Motor; Annual Maintenance Contract (Amc); Quarterly; Yes

Contract Date: Ref. Documents Contract Value : ₹ 6.45 Crore

Boards / Undertakings / PSU No of Bidders 1

Haryana View Result →

Educational and Research Institute #11161433 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 10

West Bengal View Result →

Power #11146496 AOC

Bids Are Invited For Custom Bid For Services - Calling Of Service Engineer For Excitation System (Ge Vernova Make) Supervision Testing & Rectification During Re Commissioning Of Teesta V Power Station

Contract Date: Ref. Documents Contract Value : ₹ 49.73 Lakh

Boards / Undertakings / PSU No of Bidders 1

Sikkim View Result →

10.

Public Administrative Department #10894424 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttar Pradesh View Result →

11.

Power #10874447 AOC

Bids Are Invited For Purchase Of Spare Thyristor Bridge For Static Excitation System Of Kishanganga Power House. , Thyristor Total Quantity : 1

Contract Date: Ref. Documents Contract Value : ₹ 1.07 Crore

Boards / Undertakings / PSU No of Bidders 1

Jammu And Kashmir View Result →

12.

Public Administrative Department #10852137 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Trust & NGO No of Bidders 3

Maharashtra View Result →

13.

Power #10798749 AOC

Tender for Ttps - Es - Mrt I - Capital Overhauling Works Of Digital Excitation System,Grp,6.6Kv System And Lt System In Unit I For The Year 2025-26

Contract Date: Jun 30, 2026 Contract Value : ₹ 32,069

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

14.

Power #10788119 Price Bid

Corrigendum - TENDER FOR Design, Engineering, Manufacturing, Supply, Installation, Testing And Commissioning Of Microprocessor Based Governors And Digital Static Excitation System Of Latest Technology At 3X66 Mw Ramganga Power Station, Kalagarh.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Uttarakhand View Result →

15.

Power #10773753 Price Bid

Tender For Round ‘O’ Clock Routine, Preventive And Breakdown Maintenance Of Generator And Its Associated Auxiliaries, Excitation System, Transformers & Protection System As Per Scope Of Work Of 2X500 Mw, Btps, Anpara.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Uttar Pradesh View Result →

16.

Educational and Research Institute #10755196 Price Bid

Equipment Multimode Plate Reader , Supply Of Multimode Microplate Reader , Specifications For Multimode Microplate Reader General Wavelength Selectionshould Have Quadruple Monochromators. Should Have Two Excitation Monochromator And Two Emission Monochromator Forwavelength Selection. Detection Method Should Be Capable To Read Fluorescence, Time- Resolved Fluorescence, Luminescence And Uv-Visible Absorbance. Read Method Should Be Able To Perform End-Point, Kinetic, Spectral Scanning, Well-Area Scanning Assays. Microplate Typesshould Read 6, 12, 24, 48, 96 And 384-Well Plates Without Need For Any Adapters. Temperature Control Ambient +4°C To 45°C + 0.2°C At 37°C. It Should Also Have Condensation Control System To Minimize Condensation On Plate Lids During Incubation Process. The Incubation Should Be Through Natural Heat Convection To Prevent Edge Effects In Incubated Assays. Shaking It Should Have Linear, Orbital, Double Orbital Plate Shaking Modes. Also The Speed And Duration Should Be Programmable. Softwaresingle Integrated Windows Based Software For Reader Control And Data Analysis Should Be Supplied With The Instrument. The Software Should Be Able To Analyze The Data And Perform The Calculations. Software Must Have Quick Read Function To Enable Read The Plate Without Lengthy Protocol Definition. Automation It Should Be Upgradeable To Interface With Microplate Stacker And Also Compatible With Automated Co2 / O2 Incubator Upgradable It Should Be Upgradeable On Site To Include Anisotropy Integrated In The Same Instrument For Future Needs Absorbance Light Source Xenon Flash Lamp. Lamp Life Should Be At Least 1 Billion Flashes Wavelength Selection Monochromator Wavelength Range 230 - 999 Nm, 1 Nm Increment Bandpass4 Nm (230-285 M), 8 Nm (>285 M) Dynamic Range 0 - 4.0 Od Resolution0.0001 Od Pathlength Correctionpathlength Correction Facility Should Be Available As A Standard Feature. Monochromator Wavelength Accuracy +/- 2 Nm Monochromator Wavelength Repeatability +/- 0.2 Nm Od Accuracy< 1% At 2.0 Od Typical < 3% At 3.0 Od Typical Od Linearity < 1% From 0 To 3.0 Od Typical Od Repeatability< 0.5% At 2.0 Od Typical Stray Light 0.03% At 230 Nm Typical Reading Speed96: 11 Seconds 384: 22 Seconds Fluorescence Intensity Sensitivity Top: Fluorescein 2.5 Pm Typical (0.25 Fmol/Well 384-Well Plate) Bottom: Fluorescein 4 Pm Typical (0.4 Fmol/Well 384-Well Plate) Light Source Xenon Flash Lamp Wavelength Selection Double Grating Monochromators (Top And Bottom) Wavelength Range 250 – 900 Nm Dynamic Range 7 Decades ( 0 – 9,999,999 Rfu) Detection System Low Noise Pmt Gain Settingsshould Be Able To Program Auto Or Manual Gain Settings For Pmt Reading Speed 96: 11 Seconds; 384: 22 Seconds Time Resolved Fluorescence Light Source Xenon Flash Lamp Wavelength Range 250 – 900 Nm Sensitivity Europium 1200 Fm (120 Amol/Well In 384-Well Plate) Luminescence Sensitivity20 Amol Atp (Flash) 100 Amol Atp (Glow) Wavelength Range300 - 700 Nm Dynamic Range> 6 Decades ( 0 – 5,800,000 Rlu) Power Requirements Power100-240 Vac 50/60 Hz . 130 Watts Max Regulatory Regulatory Instrument Should Be Ce And Tuv Marked.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

Tamil Nadu View Result →

17.

Housing Urban and Rular Development #10598781 Price Bid

Special Repair Of Electrical Installation & Fans & Replacement Of Main Panel, Dbs & Cables & Providing Acs, Dg Set At Office Of The Sub-Divisional Magistrate ( Kalkaji ) , 37-Institutional Area Tughlakabad, New Delhi-110062. ( Sh:-Supply Installation Testing And Commissioning Of 125 Kva Dg Set ) . , Sub Head - Dg Set Providing , Installing , Testing & Commissioning Of Silent Type Diesel Generating Set Having Prime Power Rating Of 125 Kva , 415 Volts At 1500 Rpm , 0 . 8 Lagging Power Factor At 415 V Suitable For 50 Hz , 3 Phase System & Consisting Of The Following: ( A ) Diesel Engine: Diesel Engine 4 Stroke Water Cooled , Electric Start , Of Suitable Bhp At 1500 Rpm Under Ntp Conditions Of Bs:5514 Capable Of Taking 10% Over Loading For One Hour After 12 Hours Of Continuous Operation . The Engine Will Be Fitted Complete With All The Required Accessories . ( B ) Engine Mounted Instrument Panel Fitted With Accessories & Indicators To Indicate Necessary Parameters And Having Digital Display As Per Standard Design Of The Manufacturer . I ) Start-Stop Switch Ii ) Water Temperature Indication Iii ) Lubrication Oil Pressure Indication Iv ) Battery Charging Indication V ) Rpm Indication Vi ) Over Speed Trip Indication Vii ) Low Lub . Oil Pressure Trip Indication Viii ) Engine Hours Indication Ix ) Kwh Meter ( To View The Record Of Total Unit Generated Upto Date ) . , ( C ) Alternator: Synchronous Alternator Rated At 125 Kva , 415 Volts At 1500 Rpm , 3 Phase , 50 Hz , Ac Supply With 0 . 8 Lagging Power Factor At 40 Degree C , 50% Rh At 1000 Mtr . Msl & At Ntp Conditions . The Alternator Shall Be Having Spdp Ip 23 Enclosure , Brushless , Continuous Duty , Self-Excited And Self-Regulated Through Avr Conforming To Bs:2613 . Suitable For Tropical Conditions And With Class-H Insulation . ( D ) Base Frame & Foundation: Both The Engine & Alternator Shall Be Mounted On Suitable Base Frame Made Of Ms Channel With Necessary Reinforcement Which Shall Be Installed On Suitable Cement Concrete Foundation & Vibration Isolation Arrangement As Per Recommendations Of Manufacturer . ( E ) Fuel Tank: Daily Service Fuel Tank Of 330 Liters Capacity Fabricated Out Of 3 Mm Thick M . S . Sheet Complete With All Standard Accessories & Fuel Piping Between Fuel Tank & Diesel Engine With Ms Class C Pipes Of Suitable Dia . Complete With Valves , Level Indications & Accessories As Required As Per Specifications . ( F ) Exhaust System: Dry Exhaust Mainfold With Hospital Silencer As Per Cpcb Norms . , ( G ) Starting-System: 12V / 24V Dc Starting System Comprising Of Starter Motors: Voltage Regulator And Arrangement For Initial Excitation Complete With Maintenance Free Batteries As Recommended By Manufacturer Of Dg Set & As Required As Per Specifications . ( H ) Acoustic & Weather Proof Enclosure With Arrangement For Fresh Air Intake For Cooling Of The Engine & Alternator , Extraction , Discharging Hot Air In To The Atmosphere As Per Specifications . , Fabricating , Installation , Testing & Commissioning Of Automatic Mains Failure Panel Fabricated In 2 Mm Thick Crca Sheet Steel With Suitable Size Ms Base Channel , Floor Mounted For Existing Dg Set Of 125 Kva , Including Manual Bypass For Both Main And Dg Set Supply Complete With Aluminium Bus Bars , Suitable For 125 Kva Silent Type Dg Set Complete With Relays , Timers , Set Of Cts For Metering & Protection & Energy Analyser To Indicate Current , Phase & Line Voltages , Frequency & Provision For Overload , Short Circuit , Restriction Earth Fault , Under Frequency , Connection With Existing Control Cabling Of Dg Set To Amf Panel , All Complete & Inter Locking Arrangement Including The Following . A ) 250 Amp 50 Ka 4 Pole Mccb - 2 Nos . B ) 250 Amp On Load 4 Pole Change Over Switch-2 Nos . C ) 250 Amp 4 Pole Power Contactor- 2 Nos . D ) Auto / Manual / Test / Off Selector Switch E ) 3 Nos . Of Current Transformer 250 / 5 Amps For Metering . F ) Energy Analyzer Unit To Indicate Current Voltage Frequency G ) Indicating Lamps For Load On Mains And Load On Dg Set . , H ) Sp Mcb For Instruments . I ) Control Unit With Three Impulse Automatic Engine Start / Stop And Failure To Start Lockout . J ) On / Off / Control Circuit With Indicator . K ) Audio / Video Annunciation For High Water Temperature Low Lubricating Oil Pressure Engine Over Speed Engine Fails To Start Amf Panel As Described Above , Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) In Foundation Of Pump , Dg Set Etc . Including Form Work Etc . As Required . , Earthing With G . I . Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories , And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2 . 7 Meter Long Etc . With Charcoal / Coke And Salt As Required . , Providing & Fixing 25 Mm X 5 Mm G . I . Strip On Surface Or In Recess For Connections Etc . As Required . , Providing & Fixing 25 Mm X 5 Mm G . I . Strip In 40 Mm Dia G . I . Pipe From Earth Electrode Including Connection With G . I . Nut , Bolt , Spring , Washer Excavation And Re-Filling Etc . As Required . , Fabrication Supplying Installation Testing & Commissioning Of Cubical Feeder Pillar Panel Board , Dust , Damp And Vermin Proof , Compartmentalized Made Out Of 2 . 0 Mm Thick ( Ns ) Crca Sheet Duly Powder Coated , 300 Mm Deep Complete With 4 Strips Alu . Bus Bar Of 300Amps . Capacity Complete With Connection , Interconnections , Internal Wiring With Copper Conductor Cable Of Suitable Sizes , Earthing Etc . As Reqd . , Providing & Fixing Following Rating & Breaking Capacity And Pole Mccb With Thermomagnetic Release & Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel , Making Connections , Etc . As Required . , 100 A , 16 Ka , Tpmccb , 125 A , 16 Ka , Tpmccb , 250 A , 36 Ka , Fpmccb , Credit Item , Less Credit For Unserviceable 62 . 5 Kva Dg Set .

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Delhi View Result →

18.

Educational and Research Institute #10560896 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 14

West Bengal View Result →

19.

Educational and Research Institute #10475490 Price Bid

Supply And Installation Of The Scientific Equipment Multimode Reader On Buy Back Terms , Items , Multimode Reader ( Including Buy Back Of Thermofishervarioskan Flash, Purchased In 15 / 02 / 2013 ) 1. Spectrophotometer Consists Of Uv / Vis Range 96 Well Multi Scan Microplate Reader For Easy To Use For Any Photometric Absorption Or Turbidimetric Research Applications Including Dna, Rna And Protein Analysis As Well As Fluorescence Studies. Moreover, Multi-User Environments For Kinetic, Spectral, And Endpoint Measurements Assays. 2. Measure Fluorescence Intensity ( Fi ) , Time-Resolved Fluorescence ( Trf ) , Absorbance And Luminescence In End Point, Kinetic And Spectral Measurements In The Uv / Vis / Nir Range From Appropriate Microplate Formats. 3. For Fluorescence: Excitation Wavelength Range 200 – 1000 Nm, Emission Wavelength Range 270 – 840 Nm, Excitation Bandwidth 5 Nm And 12 Nm, Emission Bandwidth 12 Nm, Or Better 4. Pc Control And Analysis Using A Software ( Software Should Be Compatible With Windows11, 64 Bit Os, Compatible Computer And Operating System Will Be Included Along With The Machine ) 5. Interface For Stand-Alone Use, And Includes Ready-Made Protocols For Fluorescence Studies, Uv Based Nucleic Acid And Protein Quantification As Well As Colorimetric Protein Quantification 6. 6 Well To 384 Well Format, Also Compatible With Low Volume ( 2-10?L ) Analysis Plate For Nucleic Acid And Protein Estimation 7. Light Source: Xenon Flash Lamp 8. Linear Measurement Range: 0 – 4 Abs ( 96-Well Plate ) At 450 Nm, ± 2%, 0 – 3 Abs ( 384-Well Plate ) At 450 Nm, ± 2% Or Better 9. Software Type: Open License Software ( Multi-Instrument Software ) Or With Full Licence 10. Accuracy ( Photometric ) : < 1?L With 50?L ( 0.4 Mm Tip ) , < 0.2 ?L With 5?L ( 0.25 Mm Tip ) Or Better 11. Incubator Temperature: Ambient + 4°C To 45°C Or Better 12. Shaking: Orbital 13. Measurement Speed: Reads A 96-Well Plate In 15 S, A 384-Well Plate In 45 S, And A 1536-Well Plate In 135 S ( Minimum Times ) ) Or Better 14. Software Language: English 15. Including 96 Well Plate 20 Numbers And 48 Well Plate 20 Numbers 16. Securely Store, Access, Share, And Manage Data 17. Compatible Computer And Accessories18. Warranty 3 Year 19. Including All Other Accessories To Complete Installation , Additional 2 Year Amc Should Be Quoted As Optional. ( Rate / Year )

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Kerala View Result →

20.

Heavy Industries and Public Enterprises #10390733 AOC

Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore

Boards / Undertakings / PSU No of Bidders 1

Kerala View Result →

21.

Power #10372988 Price Bid

Maintenance Of Generator And Its Associated Auxiliaries Excitation System Grp Of 1X110 Mw Unit 7 Htpp Kasimpur For Two Years

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Uttar Pradesh View Result →

22.

Educational and Research Institute #10372706 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

23.

Housing Urban and Rular Development #10200585 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

24.

Educational and Research Institute #10160062 Price Bid

Name Of Work: Notice Inviting E-Tender For Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Of Civil Engineering, Electrical Engineering, Mechanical Engineering And Physics Laboratory Of Raipur Govt. Poytechnic, West Bengal. - 1 Compacting Factor Test Apparatus 2 Core Cutter Testing Apparatus 3 Digital Schmidst Rebound Hammer 4 Ultrasonic Pulse Velocity Test Apparatus 5 Rebar Locator 6 Piezometer Tube 7 U-Tube Manometer 8 U-Tube Differential Manometer 9 Current Meter 10 C.O.D Analyzer Kit 11 Plane Table With Tripod Stand With Accessories 12 Plotter Machine 13 All Geared Head Lathe Machine With All Standard Accessories 14 Cone Pulley- Back Gear Type Centre Lathe With All Standard Accessories 15 Radial Drill Machine 16 Arc Welding Equipment : Arc Welding Cable 17 Arc Welding Equipment : Arc Welding Holder 18 Arc Welding Equipment : Arc Welding Electrode 19 Arc Welding Equipment : Safety Welding Helmet 20 Arc Welding Equipment : Safety Glasses 21 Arc Welding Equipment : Chipping Hammer 22 Double Wheeled Bench Grinder ( For M / C Shop , Fitting & Welding Shop ) 23 Abrasive Cut Off Machine 24 Inductive Load Box 25 Digital Multimeter 26 Panel Mounted Ammeter 27 Table Top Ammeter 28 Extension Board ( Spike Guard ) 29 Single Phase Preventer 30 Transformer Oil 31 Contactor Block 32 Panel Mounted Digital Timer 33 Ferule Type Fuse 34 Arduino Project Kit 35 Contact Type Tachometer 36 Xlpe Cable ( Red ) 37 Xlpe Cable ( Yellow ) 38 Xlpe Cable ( Blue ) 39 Xlpe Cable ( Black ) 40 Xlpe Cable ( Green ) 41 To Measure Unknown Capacitance By Schering Bridge 42 Dc Power Supply 43 Cable Crimping Tool 44 Different Types Of Cable Lugs 45 3 Phase Variac 46 3 Phase Synchroscope 47 Different Pilot Devices: Push Button Switch ( No, Nc ) , Limit Switch, Selector Swich, Pressure Switch, Float Switch, Toggle Switch, Ryb Indicators, Emergency Stop Switch 48 Capacitor Bank 49 Different Types Of Power Insulator Used In Transmission And Distribution Line 50 Model Of Supply System Of 6.6 Kv / 400 V Substation To Housing Complex 51 Model Of Different Types Of Excitation System For Alternator 52 Pv System Used In Street Lighting 53 Working Model Of Power Generation By Wind Power 54 Different Models Of Circuit Breakers 55 Lightning Arrestor Model 56 Different Type Of Fuses Fitted In Study Board 57 Different Types Oflamps With Necessary Chock, Starter, Transformer 58 Study Of Electric Arc Welding Using Welding Transformer 59 Study Of Induction Heating Using Induction Heater 60 Vernier Caliper 61 Screw Gauge 62 Sperometer 63 Concave & Convex Mirror, Focal Length 20 Cm 64 Concave & Convex Mirror, Focal Length 50 Cm 65 Concave Surface 66 Glass Slab, Dim.- 7.5X5x1.8 ( Cm3 ) 67 Glass Slab, Dim.- 10X6x1.8 ( Cm3 ) 68 Wood, Metal Inclined Plane Aparatus For Determining Coefficient Of Static Friction Between Wood And Glass 69 Hooks Law Apparatus 70 Mercury 71 Magnet 72 Small Hollow Metal Cylinder 73 Small Crome Steel Bearing Balls 74 Linear Expansion Vertical Apparatus 75 Fly Wheel Apparatus

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 14

West Bengal View Result →

25.

Educational and Research Institute #10156235 Price Bid

Equipment , Purchase Of Equipment , Specifications For Inverted Fluorescent Cell Imager: 1) Imaging Channels: Bright Field Channel And Minimum 3 Fluorescence Channels (Must Include Blue, Green, And Red) 2) Illumination Light Sources – Minimum 3 Led Cubes (Must Include For Blue Channel, For Green Channel, For Red Channel) 3) Bright Field Channel: Multiple Green Leds 4) Excitation And Emission Spectra A) Blue Channel Excitation: 355/40 Nm; Emission: 433/36 Nm B) Green Channel Excitation: 480/17 Nm; Emission: 517/23 Nm C) Red Channel Excitation: 556/20 Nm; Emission: 615/61 Nm 5) All Dyes And Fluorescent Proteins With Compatible Excitation And Emission Spectra Should Be Used. 6) User Interface: Minimum 10.1 In. Color (26 Cm) Touch-Screen Lcd Monitor, With Anti-Glare And Anti-Fingerprint Treatment 7) Image Resolution: Minimum 1,280 X 768 Pixel Image Resolution, 80–180° Angle Tilt Range 8) Focusing Mechanism Of Coarse And Fine, Manual/Automated Adjustment 9) Monochrome Camera With 12 Bit Cmos, Minimum 3.2 Megapixels 10) Data Format; Jpeg, Tiff, Or Raw Image Files 11) Image Merging Capability – Images From Up To 4 Channels Can Be Overlaid 12) Data Storage: Minimum 4Gb Internal Memory 13) Data Export: Minimum 2 Usb Ports 14) Display Output: 1 Hdmi Port 15) Objective Of Minimum 20X With Numerical Aperture 0.40 16) Display Magnification Should Be Standard:Minimum 100X And Zoom With 700X 17) Maximum Imaging Area: 0.70 Mm2 Field Of View 18) Motorized Stage: Minimum 6 Mm Travel In X, Y Direction, Touch-Screen Or Software Control Of Travel Speed And Direction 19) Compatibility – Flasks: T25, T75, Or T225 & Multi-Well Plates: 6-, 12-, 24-, 48-, 96-, Or 384-Well Microplates, Petri Dishes: 35Mm, 60 Mm, Or 100 Mm 20) Slides: Chamber Slides Or Standard Glass Microscopy Slides 21) Integrated Onboard Software 22) Stand-Alone Android Operating System. 23) Warranty: 1 Year For The Instrument.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

26.

Power #10152320 Price Bid

construction of Katar Nallah Ph-Ii Mhs (1 X 100 Kw) At Limeking In Upper Subansiri District (Sh - Supplying, Erection, Testing And Commissioning Of Electro-Mechanical Equipment Complete On Lump Sum Fixed Tender)-Design and manufacturing Horizontal Francis Turbine to deliver 100 kW,1000 rpm at generator terminals with shaft, runner, casing, bearings, oil pressure units etc. and all other auxiliaries with 10% continuous over rating conforming to relevant international specifications. 3 Design, manufacturing and Supply of Synchronous Generators 100 kW 0.415 kV, 3 phase, 0.8 Pf, 50 HZ + 3%, 1000 rpm Brushless Excitation,class F insulation for rotor and classF insulation for stator, necessary terminal equipment like neutral grounding system LA/SC and other auxillary systems as required complete with 10% continous over rating suitable for above turbine. 4 Design, manufacturing and Supply of Generator/Turbine control panels including ACBs, protection, metering systems, all indicating instruments & switches, arrangement of power house lighting & auxillaries etc with one synchronising panel including provision for synchronising the power house with GRID. 5 Design, manufacturing and Supply of Electronic load controller of reputed make with delta connected ballast loads suitable for governing and regulation of above turbine-alternator system complete in all respect and GRID synchronising. 6 Main inlet valves suitable for fixing on penstocks for emergency closure (butterfly valve) complete with mounting flanges. 7 STATION AUXILIARIES 8 1.1 kV Power and Control cable with accessories as per site requirement. 9 24 Volts 200 AH D.C. Battery, Charger and Distribution Board. 10 Design, manufacturing and Supply of Station Service Board including bus bar, with MCCBs/ MCBs etc. of adequate capacities including 10 KVA Station Aux. T/F complete with all accessories as per site requirement. 11 Earthing of Power House & Switchyard equipment as per IS:3043 and IE Rules 1956 as amended upto date. 12 Any other items required for project completion and successful commissioning. 13 Erection, Testing & Commission

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Arunachal Pradesh View Result →

27.

Educational and Research Institute #10119418 AOC

Bids Are Invited For Upgradation Of Generator Excitation Control System And Generator Static Frequency Control System Total Quantity : 1

Contract Date: Ref. Documents Contract Value : ₹ 6.30 Crore

Government Departments No of Bidders 1

Karnataka View Result →

28.

Defence #10102034 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 1

Maharashtra View Result →

29.

Agriculture #10079043 Price Bid

Tender For Supply Of Veterinary Instrument / Equipment / Chemicals / Re Agent / Media Supply Of Veterinary Instruments / Equipments / Chemicals / Reagents / Media , Hematology Auto-Analyzer , 5 Part Veterinary Hematology Analyzer For Veterinary Use Only And Not For Human, With Feature Of Direct Mode To Select The Canine, Feline, Equine, Bovine, Ferret, Gerbil, Rabbit, Pig, Mini Pig And Guinea Pig, Goat, Sheep, Llama, Alpaca, Camel, Dolphin, Based On Laser Flow Cytometry, Optical Fluorescence And Laminar Flow Impedance Technology To Measure All 26 Parameters: Red Blood Cell – Rbc, Hematocrit - Hct%, Hemoglobin - Hgb, Mean Corpuscular Hemoglobin Concentration - Mchc, Mean Corpuscular Volume – Mcv, Mean Corpuscular Hemoglobin – Mch, Red Cell Distribution Width – Rdw, Reticulocyte Count % , White Blood Cell – Wbc, Neutrophils - % And Neutrophils Absolute Numbers, Lymphocytes - % And Lymphocytes Absolute Numbers, Monocytes - % And Monocytes Absolute Numbers, Eosinophils - % And Eosinophils Absolute Numbers, Basophils - % And Basophils Absolute Numbers, Platelets – Plt, Mean Platelet Volume – Mpv, Platelet Distribution Width – Pdw, Plateletcrit Value – Pct, Requiring Less Than 30 ?L Of Anticoaguled Whole Blood, With Other Important Parameters Reticulocyte Hemoglobin, Band Neutrophil And Reticulocyte Count Also, Also To Report For Other Parameters Like Nucleated Rbc, Band Neutrophil Etc If Presence Suspected In Sample, Requiring Two Reagent Kits One External And One On Board, With Results In Two Minutes, Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Standby Mode, External Printer Interface Facility To Get The Printouts With All Parameters Including Dot Plot, Integrate With The Laboratory Information Management System For Analyzer Operation As Well As Patient Information With Patient Records, Us Fda / Ce / Iso Approved , Trinocular Microscope , Trinocular Microscope: Head: Trinocular 30 Degree Inclined W / Photo Tube & C-Mount Eyepieces: Cfi E 10X ( 20Mm ) Objectives: Cfi E Plan Achromat 4X, 10X, 40X, 100X Oil Stage: Mechanical Stage With Slide Holder Condenser: E2 Abbe Condenser N.A. 1.25, Aperture Diaphragm With Position Guide Markings For Respective Cfi E Plan Objectives Focus: Coaxial Coarse / Fine Focus Controls Illumination: Led Illumination Misc: Dust Cover, Power Cord, Manual Warranty: 5 Year Mechanical And Electrical Camera Specifications: Screen ( Optional ) Mountable 11.6 Retina Display Screen ( Hardware Included ) Resolution ( Live ) : 1920X1080 - Captured 5 M.P. Sensor: 1 / 2.5 ( 0.5X C-Mount Recommended ) ; Aptina Mt9p031 Frame Rate: Hdmi ( 30Fps ) ; Usb 2.0 ( 15Fps ) Image Capture: High Speed Sd Card ( 4Gb ) Video Capture: Hdmi: 1080P, 30Fps To Sd Card Usb 2.0: 1080P, 15Fps To Pc Or Mac Exposure Time: 0.001 Sec - 10.0 Sec White Balance: Auto Settings: Gain, Gamma, Saturation, Contraction Built-In Software: Cloud 1.0 Pc Imaging Software: Captavision Imaging Software ( For Pc Only; Mac Os Not Supported ) Advanced Camera Controls: Live / Still Image Measurement And Annotation, Flat Field Correction; Extended Depth Of Focus ( Focus Stacking ) ; Image Stitching; Hdr ( High Dynamic Range ) Function Image Types: Jpeg, Bmp, Tiff And Raw Output Modes: Mode 1: Usb 2.0 / Mode 2: Hdmi System Compatibility: Windows Xp, Vista 7 And 8, And 10 ( 32 Or 64-Bit ) Mac Os X ( For Image Transfer To Mac Os X Only ) System Requirements: Intel Processor ( Core 2 Duo Or Higher ) ; 2Gb Memory Or More; Usb 2.0 Hi-Speed Port Power Supply: Dc12v / 1A , Reinforce Protection Glass 11. Stainless Steel Darkroom 12. 10 Positions Filter Wheel To Be Supplied With The 590Nm Interferential Filter With The System For Ethidium Bromide Application 13. Auto-Exposure, Auto Focus And Automatic Illumination Control 14. The Field Of View Should Be Approximately 21X26 Cm At The Uv Transilluminator ( Slide-Out, Uv 312Nm Excitable ) Level. The Transilluminator Should Be Slide Outdesign. 15. The Uv Transilluminator Is To Be Stained Free Compatible, As Well As For The Most Common Dna / Rna Dyes 16. The System Should Be Upgradable In Future With Up To 6-8 Excitation Channels In The Uv And Visible Area For A Large Array Of Applications Such As Dna Or Rna Gels, 1D Protein Fluorescent Gels, Stain Free Gels 17. A Complete Library That Contains The Excitation And The Emission Spectra Of The Main Fluorophores Used In Modern Molecular Biology Laboratory Should Be A Built-In Feature Of The Software. It Also Should Suggest The Best Possible System Configuration In Terms Of Light Source Excitation, Emission Filter And Sensitivity Level Of Applications To Ensure Reproducibility And Ease Of Use. 18. White Light Conversion Plate Should Be Supplied 19. Facility Must Be Available To Upgrade With Blue Conversion Screen For The Excitation Of The Syber Green And Of The Sybr Safe 20. Suitable Branded Desktop Computer Must Be Quoted As Optional 21. Service Engineer Should Be Available At Bhubaneswar 22. Warranty- 1 Year , Rnase Jap , Steri Sweep Molecular Grade , Petridsih Disposable, 100Mm , Bq Rapid Test Kit , Goat Pox Virus Antigen Rapid Test Kit , Hs Rapid Test Kit , Ppr Virus Antigen Detection Rapid Test Kit , Rd Virus Antigen Detection Rapid Kit , Rotheras Mixture Lr , Super Script™ Iii Platinum™ One-Step Qrt-Pcr Kit Catalog Number:11732020 Molecular Grade , Cryo-Container 3 Litres , ( Capacity-3 To 4 Lts Of Ln2 With Static Evaporation Loss Rate Of 0.135 Litres Per Day At Stp, 6 Canisters With Od 38 Mm, Height 120Mm. The Level Of Ln2 From Bottom Should Be About 20Cm. The Neck Diameter Should Be 50Mm. The Container Is Meant For Private Ai Practitioners & Should Be Sturdy ) , Cryo-Container 35 Litres , ( High Strength Aluminium Alloy Liquid Nitrogen Container, Neck Diameter About50mm, Loss Mass- 0.29 Litre Per Day, Static Holding Time-123 Days ) , Frozen Semen Straw Lifter-10 , Stainless Steel, L Shaped, Designed To Lift Semen Straws With Vertical Serrationsmade At The Tips ( 10’’ ) , Kit Bag, Nylon Fabricated Materials, Water Proof With Good Quality Chain Having Two Main Inside Partitions & One Outsidebox Pocket, With Hanging Handle & Back Carrying Belt, 12 Height, 21 Length, 7 Width, Able To Carry 10 Kg Weight , Burdizzo Castrator For Bull Calf, Made Up Of Stain Less Steel ( 19 Length ) For Bull Calf. Burdizoo Pattern Castrators For Large Animals Consist Of Two Jaws ( Upper Jaw And Lower Cord Stop Jaw ) With Two Levers Coupled With Nuts. Material Carbon Steel Length ( Total ) 19” Width Of Upper Jaws 75 Mm + / - 2 Mm Lower Jaw ( Cord Stop Jaw ) Cord Stop Of 5-8 Mm Ht. On Both Sides ( The Gap On Either Side Between The Upper Jaw And Lower Jaw ( Having Cord Stop ) Should Range Between 1 To 1.5Mm ) Other Requirements:- 1. Tenderer For Imported Castrators Should Submit Proper Letter Of Authority From Their Principals. 2. The Offered Product Should Be In Indian Market For At Least 2 Years. 3. List Of Actual Users To Whom Same Brand Is Supplied Should Be Submitted With Copy Of Ratecontract / Supply Order Etc. 4. The Castrators Should Be Guaranteed For Satisfactory Performance For A Period Of Minimum One Year From Date Of Supply, During Which The Bidder Shall Be Liable To Be Replaced The Castrators At His / Herown Cost, If Any Complaints Are Received From End User. 5. Castrator Should Not Leave Any Gap Between Upper And Lower Jaw During Castration. 6. The Castrator Should Be Supplied Along With Spanner. With The Help Of Spanner All The Nuts Ofcastrators Shall Be Alternatively Loosened And Tightened Five Times And Neither Nuts Nor Jaws Ofspanner Shall Show Any Sign Of Damage Or De Shape. 7 . Name Of Manufacturing Company Should Be Permanently Embossed / Etched On The Body Of Castrator. , Cryo-Container 50 Litres , ( Liquid Nitrogen Container 50L, Neck Diameter About50mm, External Diameter 500Mm, Height 790Mm, Loss Mass- 0.37 Litre Per Day, Static Holding Time-134 Days ) , Digital / Electronic Semen Thaw Unit 475 Ml Capacity ( For Bovine ) , Made Up Of Stain Less Steel, Thermoflax Model With One Side Handle, With Digital Display Temperature, Having A Plastic Canister Inside To Keep / Lift The Semen Straw, With A Power Cable To Heat, Dimension ( Lxwxh ) ( 4.7 X 4.2X 9.5 ) , Weight ( Empty ) -610G, Power-74W, Rated Frequency- 50Hz, Rated Voltage-220V Ac, Capacity-475 Ml , Frenchmini Empty Straw, Pvc Straw Of Different Colours.Pack Of 2000 Straws ( 0.25Ml ) . Total Length 133Mm + / - 0.25 0.5Mm, External Diameter 1.99Mm , Internal Diameter 1.63Mm, 0.25Ml -Low Absorption Alpha Type With Flouroscent Plug Technology For Precise Filling And Safety , Cryo Gloves , Can Withstand To Retrieve The Frozen Semen Straw From Liquid Nitrogencryo Container , Portable Veterinary Ultrasound Machine , 1. It Should Be Portable Veterinary Touch Screen Color Doppler Ultrasound Unit Having Minimum12” Lcd Led Backlit Screen Size And Should Not Be Weighing More Than 4 Kg Includingbattery. 2. It Should Be Meant Forcanine, Feline, Equine, Bovine, Lama, Pig, Sheep And Others And Should Have True Veterinary Software 3. It Should Have Intuitive Interface, Touch Pad And Touch Key Board 4. It Should Have Touch System To Select Imaging Modes Like: B, B+B, Power B, B+M, M, Cfm Andpw . 5. The Machine Should Offer Dual Cfm- B / Cfm, Adjustable Region Of Interest ( Roi ) , 6. Itshould Offer Image Orientation From Left – Right And Up & Down 7. It Should Have Battery Backup For Minimum 3 Hours And Charging Time Should Not Be More Than 3 Hours 8. It Should Have Minimum 2 Usb Connectors, Wi-Fi Compatibility To Send Images To Ipad And Other Smart Devices , Basic Dicom, Stereo Sound And Bluetooth Compatibility . 9. It Should Have Digital Touch Control For All The Operational Features Like- Adjustment Of Tgc, Gain, Brightness & Contrast, Image Orientation, Focus, Freq, Depth And Dynamic Range. 10. It Should Display Mi & Ti Indexing On The Screen By Default And Should Be In The Permissible Limit As Per Fda And Overall Safe. 11. The Machine Should Be Able To Generate Report Of The Animal Combined With Images To Further Send Through Digitally In Multiple Forms 12. The Ultrasound Machine Should Be Offering Absolutely Very High Image Quality Hence Should Be Using Digital Dual Beam Former And Computing And Should Be Using Minimum 128 Reception Channels And Around 60 Emission Channels Or More. 13. It Should Have 500Gb Hard Disc Capacity 14. The Machine Should Offer Both Portrait And Landscape Imaging View 15. The Machine Should Be Having Hdmi And Wi-Fi Compatibility 16. It Should Have 256 Grey Scale 17. The Machine Must Be Able To Take The Voice Command Of The User To Adjust Depth, Probe Frequency, Focus, Gain And Freeze In B Mode 18. It Should Be Provided With One Micro Convex Probe Having 5-7.5Mhz Frequency Suitable For Small Animal Abdomen 19. It Should Be Offered With Endo Rectal Probe Having Frequency Of 5-10Mhz And 600 Mm Footprint Of The Scanning Face Of The Probe For Large Animal Reproduction And Fetal Sexing On Animal. The Endo Rectal Probe Should Be Atleast 2.5 Meter Long. 20. It Should Have Digitized Tgc Upto 8 Adjustable Zones And Should Be Adjustable With Touch Only 21. The Ultrasound Machine Should Be Fully Compatible For Opu Operation On Animal And Offer Ergonomics Applications To Carry Out Ovum Pickup Successfully With Compatible Devices For Future Procurement. 22. The Machine Should Be Supplied In A Hard Plastic Carry Case Having Proper Housing For Machine And Accessories. 23. The Machine Should Have An Ergo Mount Adaptor For Mounting The Machine On Certain Device / Stand. 24. It Should Have Patient, Hospital And Reporting Format. 25. The Machine Should Be Ce Marked. 26. It Will Be Inevitable On The Part Of The Supplying Company To Arrange And Provide Extensive Clinical Training For Two Days On Animals To Teach About Topographic Anatomy Using Ultrasound And Different Applications Of The Machine For Its Ergonomic Purpose By A Qualified Veterinary Specialist At A Common Venue. 27. The Principal Maufacturing Company Of Offered Product Should Have Their Direct Office And Service Centre In India With Good Strength Of Engineers. 28. The System Offered Should Be Warranted For At Least One Year. , Cryo Can -1.5 Ltr, Capacity 1.5Lit, Material : Aluminium , Static Evaporation Rate : 0.05 Lit / Day To 0.1 Lit / Day , Cryo-Container 55 Litres , Capacity 55Lit, Material : Aluminium , Static Evaporation Rate : 0.43 Lit / Day To 0.45 Lit / Day , Jumbo-12, Capacity 47Lit, Canister : 11, Material : Aluminium , Static Evaporation Rate : 0.35 Lit / Day To 0.4 Lit / Day , Liquid Nitrogen Transfer Hose Pipe ( Non Insulated ) -5 Mt, 1 / 2 Inch Nb 5 Mt Long Flexible Non- Insulated Vacuum Hose Along With Gaskate. , Wide Mouth Container ( Storage Vat Of Frozen Semen Straws ) -390 Liters, •Wide Mouth Container Made Of Non-Magnetic Stainless Steel Of Approximate 390 Ltrs Capacity. •Should Have Capacity To Store More Than 3.9 Lacs Straws Of 0.25 Ml ( With Canisters ) •Static Holding Time: Minimum 30 Days •Internal Diameter: Approx. 770 Mm •Empty Weight: Not More Than 200 Kg •Total Weight ( Including Samples ) : Not More Than 520 Kg •Total Height: Max. 1320 Mm •Daily Evaporation Rate Should Be Less Than 10 Ltr. / Day . •Should Be With Temp. Indicator, Low Temperature Alarm, Level Indicator, Low Level Alarm Indicator. •Should Have Option Of Auto Filling & Interface For Remote Monitoring •Heavy-Duty Casters To Provide Mobility Within The Lab. •The Equipment Must Be Quoted With One-Year Warranty Including Installation. The Concern Should Have Experience Of Installing Successfully At Least ( 03 ) Five Such Systems In Cmu Graded Semen Labs In India, For Which Necessary Documents Must Be Attached. The Satisfactory Working Report From The User Also To Be Attached. , 5 Ply Corrugated Card Board Box, Size-355Mm X 305 Mm X30mm , Ss 316 Storage Tank, Capacity-200Liters, With Accessories Ss 316 Storage Tank, Capacity-200Liters, With Accessories •M.O.C Of All Contact Parts : Ss 316 •M.O.C Of All Non-Contact Parts : Ss 304 Type Of Tank : Torispherical Dish End Vertical Tank •Dia: 700Ø / Shell Ht.: 550 Mm •Shell / Dish Thickness: 4 Mm Steam Heating Jacketed Tank Dia.800Mm X 4Mm Thk. •Shell Thickness: 4 Mm - Ss 304 •Tank With Heat Insulation Jacket With Rockwool Insulation - Dia. 900 Mm •Shell Thickness : 2 Mm - Ss 304 •Tank Internal Surface Mirror Polished. • Volume Sensor-1 No • Ph Sensor-1 No Accessories •Temperature Sensor - 1 No. •Steam Inlet Valve3 / 4 - 1 No. •Steam Trap Assembly3 / 4 - 1 No. •Steam Safety Valve With Pr. Gauge 1 No. •Control Panel- 1 No. •Ss 316 Diaphragm Valve, Size:1 -2 Nos •Vent Filter With Electrical Heating, 10 Long 0.2 Micron P7 Pp Cartridge-1 No. •Sight Glass Assembly3- 2 Nos •1 Tc Compound Pr. Gauge With 4 Dial, -1 To 10 Bar Pressure- 1 No. , Non Invasive Multiplexed Biomass Sensor System, Automated, Continuous, Real Time, Multi Vessel Biomass / Od Monitoring With Working Volume Done To 10 Ml, Biomass Sensitive Range Less Than 0.01 To Greater Than 600 Od Units, 12 Mm Diameter , Peristaltic Pump-201Vnotor-Stepper With Motor Torque-10Kg, Rpm- 1 To 200, Tube Size- 1 To 8 Mm, Flow Rate- 0.8 To 1800Ml / Min, Discharge Pressure - 2Bar, Maximum Discharge Height- 10 Litres, Dimension- ( L-325 X W-170 X H-250 ) Mm , Peristaltic Pump-401Vnotor-Stepper With Motor Torque-1 / 6 Hp, Rpm- 20 To 240, Tube Size- 8 To 19 Mm, Flow Rate- 250 To 20000Ml / Min, Discharge Pressure - 3Bar, Maximum Discharge Height- 30 Litres, Dimension- ( L-500 X W-250 X H-400 ) Mm , Absorbent Cotton Ip 500Gm Pkt ( Each ) , 500 Gm, Absorbency Not More Than 10Sec. , Cover Slip -Glass / Disposable, , Circular / Rectangular-100 Nos / Pkt ( 100 Nos ) , Cover Slip -Glass, Optically Clear, Distortion Free Surfac, Circular & Rectangular-100 Nos / Pkt , Cryovial 1.8Ml / 4.5Ml, Pp, Pkt Of 100, Material-Plastic , Disposable Needle-Strile 18 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Needle-Strile 20 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Needle-Strile 22 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Syringe With Needle-Sterile, Graduated, 10Ml With 18 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 20Ml With 18 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 2Ml With 20 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 5Ml With 18 G Needle Packed Individually ( Each ) , Gauze Cloth , 100% Cotton, 90Cm X 16 Mtr ( Each ) , Gauze Cloth 90Cm X 16 Mtr Bandage 10 Cm X 3 Mtr ; 15 Cm X 3 Mtr , Haematocrit Tubes Acc. To Wintrobe, Soda Lime Glass, Straight Rim, Round Bottom, Double Numbered Scale In Red / White Colour, 105 Mm Subdivided In 1 Mm, Outside Diameter Approx. 6.5 Mm, Inside Diameter Approx. 2.9 Mm, In Cartons Of 20 Pcs. , Non -Absorbent Cotton Ip.500Gm Pkt ( Each ) , Pop Bandage 6 , Roller Bandage 10Cm X 3M, Gauze / Cotton, Pack Of 10 ( Pkt Of 10 ) , Roller Bandage 15Cm X 3M, Gauze / Cotton, Pack Of 10 ( Pkt Of 10 ) , Ph Paper , With Universal Indicator 1 To 14 , Glass Slides, Microscopic -Optically Clear, Distortion Free Surface , Bunsen Burner, Gear Type: Natural Gas, Material: Stainless Steel, Btu Output: 1200 Per Hour, Inlet Tube Od: 0.4375 Inches, Height:6 Inches , Digital Balance, Base On Electromagnetic Force Compensation Technology To Match The Highest International Standards . High Integrated Weighing Scale.Internal Adjustments Caliberation: Lb- C3 Type Caliberation. Motorized Internal Built In Weight Caliberation.Lb-C Series. Psas Fully Automatic Time And Temperature Controlled Internal Adjustments.Lb-C Series. Automatic External Caliberationlb-C / Lb Series Balance Protection.Smart Keystop Calliberation. Menu Lock ( Settings Password Protection ) . Overload Protection.Ip54protection Class. Overview: Display : Lcd High Contrast Display With Led Back Light. Large Glass Draft Shield With 3 Sliding Doors For Easy Acess To Items Being Weighted Key Pad Cover With Plastic Protection.. Tare Key Left / Right Sidefor User Friendly.Bubble Level Indication With Adjustableleg Uniform Surface Level.Balance Is Equipped With Rs232 Ouput Interface Connect Balance Pc Or Statistical Printer.Windows Direct Communication.. Usb Interface Optional. High Grade Materialconstruction Protects Against Chemicals And Rough Handling.Application: Piece Counting, Check Weighing , Percentage Weighing, Tantalization., Animal Weighing, Density Determination, Statistics, Custom Weighing Unit Formulation, Below Weigh Hook . Internal Caliberation: Model: Lb224c- Max- 220Gm, D-0.1 Mg, Pan Size-90Mm, Analaytical Balance:220Gm; Lb224c. External Calliberation:Lb224-220Gm D- 0.1 Mg, Pan Size 90Mm , Ai Tray, Stainless Stell 55-60Cm X25-30 Cm , Calf Puller Consist Of Precision Threaded Shaft Of 76 Long In Two Part With Breech Spanner For Pelvic Bones .Frictionjack Fittingwith Leg And Tractionbelt For Smooth Calf Delivery , Spay Snook Hook, Stainless Steel, Blunt 8 Inch Convex , Goblet Holding Forcep ( 18 ) , Stainless Steel, Lock Types Goblet Holding Forcep , Bipolar Thermocuttery Unit, Microcontroller Based Isolated Electrosurgical Generator Having Both Monopolar And Bipolar Outputs Designed For All Surgical Procedures, All Cut Modes Should Be Able To Adjust Output Power Depending On Tissue Density By Less Than 15% Or 5W, Whichever Is Greater. Should Have Three Coag Modes With Maximum Power Of 120W, It Should Have Three Bipolar Modes With Maximum Power Of 70W, The Unit Should Have Two Hand Switching And Two Footswitch Monopolar Outputs And One Hand Switching And Foot Switching Bipolar Output, The Unit Should Have Individual Digital Display Of Power For Bipolar, Monopolar Cut And Monopolar Coag. The Unit Should Not Have Rf Leakage Current More Than 150Ma. The Unit Should Not Have Rf Leakage Current More Than 150Ma. Two Years Of Comprehensive Warranty Including Bulbs Should Be Provided Along With Technical Support. It Should Follow International Safety Standard And Requirement With Ce Certification Or Usfda Approval. Operating And Service Manual Should Be Supplied. , Air Drill, High Speed Air Handpiece: 360, 000 Rpm Variable High Speed Handpiece, Low Speed Air Handpiece: Up To 20, 000 Rpm For Slow Speed Control., Complete Prophy Starter Kit, 3-Way Air Water Syringe: Allows The Operator The Ability To Rinse The Operative Site With A Stream Of Water Or Mist Or Dry / Blow Debris With A Stream Of Air. Foot Pedal Control: The Foot Switch Is A Durable Chrome-Plated Pedal. By Pressing Harder On The Foot Switch It Will Deliver More Power To The High Speed Handpiece Controlling The Speed Easily. , Burdizzo Castrator Small, Burdizoo Pattern Castrators For Small Animals Consist Of Two Jaws ( Upper Jaw And Lower Cord Stop Jaw ) With Two Levers Coupled With Nuts. Material For Small Animals:Material Carbon Steel Length ( Total ) 220-230 Mm Width Of Upper Jaws 42 Mm + / -2Mm Lower Jaw ( Cord Stop Jaw ) Cord Stop Of 5-8 Mm Ht. On Both Sides ( The Gap On Either Side Between The Upper Jaw And Lower Jaw ( Having Cord Stop ) Should Range Between 1To 1.5Mm ) Other Requirements:- 1. Tenderer For Imported Castrators Should Submit Proper Letter Of Authority From Their Principals. 2. The Offered Product Should Be In Indian Market For At Least 2 Years. 3. List Of Actual Users To Whom Same Brand Is Supplied Should Be Submitted With Copy Of Ratecontract / Supply Order Etc. 4. The Castrators Should Be Guaranteed For Satisfactory Performance For A Period Of Minimum One Yearfrom Date Of Supply, During Which They Shall Be Liable To Replace The Castrators At Their Own Cost, If Any Complaints Received From End User. 5. Castrator Should Not Leave Any Gap Between Upper And Lower Jaw During Castration. 6. The Castrator Should Be Supplied Along With Spanner. With The Help Of Spanner All The Nuts Ofcastrators Shall Be Alternatively Loosened And Tightened Five Times And Neither Nuts Nor Jaws Ofspanner Shall Show Any Sign Of Damage Or De Shape. 7. Name Of Manufacturing Company Should Be Permanently Embossed / Etched On The Body Of Castrator. , Drenching Gun, Usage / Application - Drenching For The Entire Herd, Automation Grade / Semi-Automatic, Finishing- Color Coated, Capacity- 23 Ml , Endo Tracheal Tube No 06, Size-6 Inch, Application- Hospital, Steribility- Sterile, Material- Pvc, Color- White Transparent , Endo Tracheal Tube No 08, Size-8 Inch, Application- Hospital, Steribility- Sterile, Material- Pvc, Color- White Transparent , Et Tube ( Size 2-12 ) , Size- 2Mm To 12 Mm, Cuff Type- Cuffed , Hartman Ear Forcep, Composition: Stainless, Customer Segment: Hospitals, Surgery Centers & Tissue Banks, Finish: Satin, Grade: Or, Item Type: Forceps, Length - Working ( Mm ) : 64, Length 1 - Tip / Jaw ( Mm ) : 6, Physician / Developer: Hartmann, Shape: Straight, Therapeutic Specialty: Otology, Usage: Reusable, Width 1 - Tip / Jaw ( Mm ) : 1.5 , Laryngoscope, Battery Handel, Throat Cannual, With 2 Attachment For Anesthesia. , Pm Kit, 1 ) Amputation Saw, Stainless Steel 2 ) Wire Saw With Handle, Stainless Steel ( Gigil Wire Saw ) 3 ) One Spare Wire For Wire Saw4 ) Post-Mortem Knife 5 ) Full Hand Gloves, Size-6 & 7 6 ) Post-Mortem Gloves, Latex, Size-6 & 77 ) Bone Hammer8 ) Bone Chisel9 ) Post - Mortem Scissor, Stainless Steel10 ) Scalpel, Stainless Steel11 ) Allis Tissue Forceps, Stainless Steel 1512 ) Sharpening Stone13 ) Probe, Stainless Steel14 ) Scissor, Dressing, Stainless Steel15 ) Bowel Scissors, Stainless Steel16 ) Retractor Four Prong Sharp 17 ) Retractor Four Prong Blunt 18 ) Dissecting Forceps, Toothed, Stainless Steel 19 ) Bone Holding Forceps, Stainless Steel 20 ) Abscess Knife, Stainless Steel22 ) Bone File23 ) Measuring Tape 24 ) Vice With Two Adjustable Jaws Made Of Iron For Cutting Heads Of Animal. , Small Animal Dental Instrument Set, D107 , Suture Cutting Scissor, Size- 6 Inch, Material- 304 Grade Stainless Steel, Material Grade- Aisi Grade, Automation Grade- Manual, Handle Type- Finger Ring , Opthalmoscope, Technical Specifications Of Opthalmoscope: 1. Dimensions: 5.12” L X 1.40” W X 3.75” H Without Eyecup ( With Eyecup: 1.45” L ) 2. Weight: 48 Lbs Without Eyecup; 50 Lbs With Eyecup 3. Focusing Range: -20 To +20 Diopters Other Features Of Opthalmoscope: 1. First Easy Entry Into Undilated Pupils 2. 5X Larger View Of The Fundus Vs. Standard Opthalmoscopes In An Undilated Eye 3. 25 Degree Field Of View Vs. Standard 5 Degree Field Of View 4. Greater Working Distance Improves Comfort For Both Practitioners And Patient 5. Patented Glare Extinguishment System Prevents Interference From Unwanted Glare And Reflections 6. Halogen Hpx Lamp Provides Bright 7. Compatible With All Existing Welch Allyn 3.5 V Power Sources 8. Digitally Capture, Store And Share Fundus Images By Combining With Eye Examiner For I Phone 4 / 4S, Eye Examiner For I Phone 6 / 6S And Eye Examiner For I Phone 6 Plus / 6S Plus Adapters 9. The Veterinary Pan Opthalmoscope Has A 3 Spot Sizes: Micro, Small And Large With Add On Magnifying Lens 10. One Year Warranty , Automatic Urine Analyzer , Veterinary Urine Analyzer For Veterinary Use Only And Not For Human For Species Canine, Feline And Equine, Based On Urine Strip Reflectance Technology To Measure All Parameters: Ph, Leu ( Leukocytes ) , Pro ( Protein ) , Glu ( Glucose ) , Ket ( Ketones ) , Ubg ( Urobilinogen ) , Bil ( Biliruben ) Single Test Urine Strip To Measure All Above Parameters, Very Light Weight And Not More Than 1 Kg With Calibration Strip For Calibration Of The Analyzer On Fix Frequency, Able To Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Maintenance Free And Ready To Use, Can Be Integrate With The Laboratory Information Management System ( Optional ) With In Built Thermal Printer To Printout All Parameters, Lcd Display For Operating The Analyzer Ce / Iso Approved , Automatic Blood Analyser, 5 Part Veterinary Hematology Analyzer For Veterinary Use Only And Not For Human, With Feature Of Direct Mode To Select The Canine, Feline, Equine, Bovine, Ferret, Gerbil, Rabbit, Pig, Mini Pig And Guinea Pig, Goat, Sheep, Llama, Alpaca, Camel, Dolphin, Based On Laser Flow Cytometry, Optical Fluorescence And Laminar Flow Impedance Technology To Measure All 26 Parameters: Red Blood Cell – Rbc, Hematocrit - Hct%, Hemoglobin - Hgb, Mean Corpuscular Hemoglobin Concentration - Mchc, Mean Corpuscular Volume – Mcv, Mean Corpuscular Hemoglobin – Mch, Red Cell Distribution Width – Rdw, Reticulocyte Count % , White Blood Cell – Wbc, Neutrophils - % And Neutrophils Absolute Numbers, Lymphocytes - % And Lymphocytes Absolute Numbers, Monocytes - % And Monocytes Absolute Numbers, Eosinophils - % And Eosinophils Absolute Numbers, Basophils - % And Basophils Absolute Numbers, Platelets – Plt, Mean Platelet Volume – Mpv, Platelet Distribution Width – Pdw, Plateletcrit Value – Pct, Requiring Less Than 30 ?L Of Anticoaguled Whole Blood, With Other Important Parameters Reticulocyte Hemoglobin, Band Neutrophil And Reticulocyte Count Also, Also To Report For Other Parameters Like Nucleated Rbc, Band Neutrophil Etc If Presence Suspected In Sample, Requiring Two Reagent Kits One External And One On Board, With Results In Two Minutes, Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Standby Mode, External Printer Interface Facility To Get The Printouts With All Parameters Including Dot Plot, Integrate With The Laboratory Information Management System For Analyzer Operation As Well As Patient Information With Patient Records, Us Fda / Ce / Iso Approved , Automatic Urine Analyzer , Veterinary Urine Analyzer For Veterinary Use Only And Not For Human For Species Canine, Feline And Equine, Based On Urine Strip Reflectance Technology To Measure All Parameters: Ph, Leu ( Leukocytes ) , Pro ( Protein ) , Glu ( Glucose ) , Ket ( Ketones ) , Ubg ( Urobilinogen ) , Bil ( Biliruben ) Single Test Urine Strip To Measure All Above Parameters, Very Light Weight And Not More Than 1 Kg With Calibration Strip For Calibration Of The Analyzer On Fix Frequency, Able To Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Maintenance Free And Ready To Use, Can Be Integrate With The Laboratory Information Management System ( Optional ) With In Built Thermal Printer To Printout All Parameters, Lcd Display For Operating The Analyzer Ce / Iso Approved , Otoscope / Auroscope, Otoscope Set , Inverter, Capacity: 900 Va / 12V; Maximum Bulb Load - 756 Watt, Protection: Mcb For Protection From Input Mains & Safety Alarm To Warn In Case Of Short Circuit, Display: Lcd Display For The Status Of Power Back-Up / Battery Charging Time In Hours And Minutes, Inverter Battery Capacity: 80 Ah - 150Ah, Battery Type: Tall Tubular Inverter Battery , Nominal Voltage: 12V; Rated Capacity At 27Oc: 200 Ah , Bench Platform Stainless Steel Weighing Balance ( Capacity 200Kg ) , Calibration- Internal, Weighing Capaciy Upto 200Kg, Material-Ms , Restraining Chain For Dog, Dog Restraint Heavy-Duty Tie-Out Chain Featuring Two ( 2 ) Snap Hooks, Lengths: 3 – 4 Meters, 3-5 Mm, Stainless Stell , Electric Water Heater, Capacity- 25-50 Litres, Max Rated Pressure- 5-10 Bar, Power ( Kw ) -2-4 , Stretcher Trolly For Small Animals, Stainless Steel Stretcher Trolley For Small Animal , Removable Stretcher, Attachment Hooks, Stainless Steel Tray, Possibility Of Integrating A Coloured Carpet With Frame, 4 Retractable Handles As Well As 4 Castors, 2 Of Which Have Brakes. , Muzzel For Dog Restrain, For Dog , Needle Destroyer, Input Electrical Supply- 1Ph, 230 Vac ( + / - 10% ) , 50 Hz ( + / -3% ) , Enclosure- Abs Plastic Injection Molded, Power Consumption- 100 Watts ( Minimum ) In Continuous Rating, Destruction Capacity- Needles Of Size Dia 0.4 Mm To 1.6 Mm, Syringe Cutter- Hardened Stainless Steel Cutter, Collection Tray Capacity- Maximum 200 Nos Of Cut Syringe Hubs & Swarf Of Destroyed Needles. Overall Dimensions- 230 ( L ) X 150 ( W ) X 95 ( H ) Mm. Weight In Kgs: 2.0 Approx. , Pet Hair Trimmer, Low Noise Cordless With 4 Comb Guides Scissors Pet Hair Trimmer , Pet Nail Cutter, Stainless Steel Sharpness Blades, Secure Grip Rubber Coated Non-Slip Handles, Safety Lock Mechanism, Safety Guard , Staining Rack, Designed For The Staining Of Upto 25 Microscope Slides , Travis For Pet ( Squeeze Cage ) , Heavy Duty Metal Cage To Restrain Pet Dog / Cat ( Length-30, Breadth-16, Height-20 ) , Ot Table, Side End Control Ot Table Is Mobile, Hydraulic Designed For Small Animal Surgery. Adjustable Height Functions. The Surface Of The Table-Top Should Beplain And Is Smooth And Easy To Clean And Disinfect. The Base And Column Of The Table Should Be Of High Quality Medical Stainless Steel. Non-Reflecting Surface, Antibacterial & Easy To Clean. Height Adjustment By Stepping Foot Pedal Downward. Lateral Tilts, Trendelenburg, And Are Realized By Handle Manually. Equipped With Drain System. , Ambu Bag, 265Mm With 85Mm Diameter. Volume: 1500Ml Weight: 190G Components: - Connector, Complete, Towards Patient Valve ( 24.3 ) . - Outer Cover ( 24.2 ) - Inner Bag ( 24.1 ) - Inlet Valve For Combined Air And Oxygen: Complete With Silicone Membrane And Tube Connector For The Oxygen Reservoir ( 24.7 To 24.10 ) , Infrared Lamp, Power- 300W-4000W, Voltage- 110V-440V , Instrument Cabinet, Material- Aluminium, Size / Dimension- ( H ) 1800 X ( W ) 900 X ( D ) 400 Mm, Finishing- Polished, Number Of Doors- 2 Doors, Lockable, Thickness- 1 Mm, Handle Material- Aluminium , Nebulizer, Usage / Application- Hospital, Operation Mode- Table Top, Type- Soft Mist Inhaler , Oxygen Cylinder, 10 Lt , Electric Orthopaedic Bone Drill Machine, One Handpiece, One Charger, Two Batteries, One Sterilizing Channel, One Drill Chuck , One Aluminium Alloy Box, Axial Run-Out Of Cincentricity Is Within 0.05Mm, Rotating Speed Of About 1100 Rpm, Rotated Torque 3.3N / M , Bone Cutter, Material- Stainless Steel, Length- 9 Inch, Steel Grade Ss410, Surface Finish- Dull, Working Type- Double Action , Bone Hammer, Bone Hammer- Nylon Faced, Material- Stainless Steel, Handle Material- Fiber Handle , Bone Holding Forceops, Type- Surgical Equipments, Material- Stainless Steel, Size- 150 - 280 Mm, , Cow Anti Kick Bar, Automation Grade- Manual, Weight-1.7 Kg , Electrical Dehorner, Material- Stainless Steel, -With 24 Volt Safety Transformer, -Including Dehorning Tip Ø 18 Mm, -Very High Heat Release , Electrical Plaster Cutter, Blade Size-42.5 Mm And 62.5 Mm, Includes- 1Spanner And 2 Blades , Digital X-Ray Machine , High Frequency X-Ray Machine Suitable For General Radiography. X-Ray Generator: - High Frequency X-Ray Generator Having Frequency Of 110Khz Or More Should Be Provided. - Power Output Of Generator Should Be 4.2Kw. - Radiographic Kv Range Should Be 40 To 120Kv. - Ma Range ( Rad. ) : 110Ma Or More. - Exposure Time ( Rad. ) : 9 Ms To 5Sec. - Mas Range ( Rad. ) : 1 To 200Mas. Control: Attractive And Ergonomically Designed Control Panel With Total Soft Touch Switches For Various Operations. Having Following Functions & Indications. • Machine On / Off Switch • Digital Display Of Kv And Mas. • Kv And Mas Increase And Decrease Switches. • Ready And X-Ray On Switch With Indicators • Bucky Selection Switch. • Stand By And Exposure Release Switch. • Self Diagnostic Program With Indicators For:- ? Earth Fault Error ? Kv Error ? Filament Error ? Tube Head Thermal Overload. • X-Ray On Indicator. • Incoming Voltage Indicator. • Anatomical Programming Up To 216 Pre-Programmed Functions In Which Automatic Selection Of Technical Factors Is Done According To The Body Part Selection. A 2-Step Hand Switch With Dual Action For Exposure Release With Retractable Cord Should Be Provided For Taking Images From A Safer Distance. X-Ray Tube: • Mono-Block Version X-Ray Tube Head Should Be Provided. The Mono-Block Consists Of Stationary Anode X-Ray Tube, H.V. Transformer, Filament Transformer, H.V. Rectifiers And Capacitors, All Immersed In High Grade Oil With High Dielectric Strength. Mono-Block Tube Head Should Be Protected For Thermal Overload. • Manual Lbd ( Light Beam Diaphragm ) With Should Be Provided With Provision Of Auto Shutoff. Stand: Mobile Stand With 4-Wheel Design, Which Ensures Easy Mobility And Steering. The Spring Balance Stand ( With Fixed Tube Head Column ) Should Be Very Light In Weight With Tube Arm, Which Is Very Easy To Maneuver And Allows Smooth Movements Of Tube Head In Vertical Plane. Lead Lined Cassette Storage Box. This Mobile Stand Is Made To Withstand All Jerks While In Use Offering Unparalleled Reliability. Sbm Stand Can Be Easily Moved On Floor And Lock Should Be Provided To Lock Its Movement On Floor. The Equipment Occupies Minimum Floor Area And Is Capable To Be Taken Through Elevators With Ease. Power Requirement: Single Phase 230V, Ac And 50 Hz., 15 Amps With Line Regulation Of ±10%. Other Requirements: • The Company Should Be Iso And Icmedcertified. • The Unit Should Be Approved By Aerb. • The Unit Should Beeuropean Ce Certified From Notified Body. • The Company Should Have A Local Service Center. • The Company Should Have Proven Track Record In Govt. Sector. , Dryview Laser Imaging Film • Blue 7-Mil Polyester Base • Daylight-Load Film Cartridges • 125 Sheets / Cartridge Choice Of Film Sizes • The Dryview 5700 Laser Imager Should Support The Following Film Sizes 14 X 17 Inch ( 35 X 43 Cm ) 11 X 14 Inch ( 28 X 35 Cm ) 10 X 12 Inch ( 25 X 30 Cm ) 08 X 10 Inch ( 20 X 25 Cm ) Automatic Image Quality Control ( Aiqc ) • Should Ensure Consistency From Film To Film • Automatic With No User Intervention Network Connectivity • Integrated Dicom Interface Should Support Printing From Dicom Print Modalitites Network Connection • 10 / 100 / 1000 Base-T Ethernet Connection To Mange ( Should Support Jumbo Frame ) Dicom Sop Classes Supported • Basic Grayscale Print Mangement Meta Sop Class • Basic Color Print Management Meta Sop Class • Presentation Lut Sop Class • Basic Automation Box Sop Class • Verification Sop Class Dimension / Weight • Height: 19 Inch ( 47 Cm ) • Width: 24 Inch ( 61 Cm ) • Depth: 26 Inch ( 66 Cm ) • Weight: 120 Lbs. ( 54 Kg ) Power • 100-120 Vac; 50 / 60 Hz • 200-240 Vac; 50 / 60 Hz Operating Environment • Temperature: 59 To 91° F ( 15 To 33° C ) • Humidity 20 To 80% Rh, Non-Condensing • Magnetic Field < 50 Gauss • Altitude:-100 To 10000 Ft ( -30.5 To 3048 Mts ) User Interface • Simplified User Panel • User Documentation And Languages Supported: - English ( Uk ) - English ( Usa ) , X Ray Flim Viewer, Specification • Luminance: Max 100000 Cd / M² • Film Density: Max 4.0 D According To En 25580 / Astm E 1390 • Control Range: 1 – 100% • Viewing Screen: 225 X 80 Mm ( 10 X 24 Cm ) • Rated Power: 70 W • Power Supply: 90 – 264 V Ac / 24 V • Dimensions: 315 X 62 X 150 Mm • Lifetime Of Leds: 40000 H • Colour Temperature Of Leds: 5000 K • Housing: Anodized Aluminium Profile With Cooling Fins – Completely Closed To The Environment • Viewing Screen: Crystal Glass With 95% Translucency, Thermally Cured, Anti-Reflective Coating

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 10

Odisha View Result →

30.

Educational and Research Institute #9921235 AOC

Supply Of Following Items For Setting Up Measurement And Instrumentation Lab For 4 Year B.Tech In Electrical Engineering Curriculum And Application For University Of Calcutta. , Experimental Set-Up For Calibration Of A Wattmeter Using Dc Potentiometer With Following Features/Items: Regulated Power Supply 2 Volts, 100 Ma To Operate The Potentiometer. Calibrated Electronic Standard Cell Voltage 1.0186 Volts. Regulated Power Supply 0-5 Volts/0.5 Amps With Milliammeter 0- 500Ma For Current Coil Of Wattmeter. Regulated High Voltage Power Supply 0-250 Dc Volts With Voltmeter 0-250 Volts For Pressure Coil Of Wattmeter. A Panel Mounting Wattmeter 0-125 Watt Is Required To Perform The Experiment Galvanometer For Null Balance. A Volt Ratio Box For Measurement Of Higher Voltage. Complete Circuit Diagram With Wattmeter Connections To Be Provided On The Front Panel Of The Instrument. With Standard Accessories , Experimental Set-Up For Low Resistance Measurement Using Kelvin’S Double Bridge With Following Features: Range: 0.2 Micro Ohm To 11 Ohms, With An Accuracy Of 0.05 % Required Accessories: Spot Reflecting Galvanometer. Dc Source 10 A With One Analog Current Meter. Attachment Of 1 Meter Length. Brass Clamp With Terminals For Zero Setting. With Standard Accessories , Experimental Set Up For Unknown Capacitance Measurement Using De-Sauty’S Bridge With Following Specifications: Source: Sine Wave Signal Of 1Khz. The Amplitude Of Ac Switch Indicating Lamp Is Provided On The Bakelite Board. Two Sockets Are To Be Provided For The Output Of Ac Signals. Detector: For Detecting Small Ac Signals In The Output, Null Detector Is Required As In-Built With Digital Display. Circuit Diagram:The Circuit Layout On The Board Is To Be Provided Out To Facilitate Convenient Working. 4 Or 5 Mm Socket Required For Making Connection. Features: R2 --- Three Decade Resistance Dials Having Value 10×1000, 10×100 And 10×10Ohms R1 ---- Single Decade Resistance Dial Having Value 10× 100 Ohms C1 ---- Unknown Capacitor. C2 ---- Two Fixed Standard Capacitors Having Value 0.01Mfd 0.1Mfd (Loss Free) With Standard Accessories , Experimental Set-Up For Calibration Of A 1-Phase Watt-Hour Meter With Following Scopes: • To Adjust & Calibrate A Single-Phase Energy Meter By Direct Loading Method • To Adjust & Calibrate A Single-Phase Energy Meter By Comparing With A Sub-Standard Meter Specifications: • Static Energy Meter Single Phase: Under Test (Local) Duly Mounted, Wired And Terminated • Static Energy Meter Single Phase: Sub-Standard Meter (Isi Mark) Duly Mounted, Wired And Terminated • Voltmeter: Moving Iron Ac Portable Of Class 1.0 Accuracy And Range 0 - 300 V Ac • Ammeter: Moving Iron Ac Portable Of Class 1.0 Accuracy And Range 0 - 10 A Ac • Wattmeter: Dynamometer Type Ac Single Phase, Multi-Range With Current Coil 5 / 10 Amp And Potential Coil 75 / 150 / 300 V Ac • Variac: Variable Voltage Transformer (Portable – Table / Floor Mounting Type With Enclosure) Input: 230V Ac And Output: 0–270V / 8 Amp Ac • Variable Load: Made Up Of 3 Load Resistors Of 70 Ohms / 700 W Each Duly Mounted And Connected / Terminated To Form Different Loads (35 To 210 Ohms) As Per External Connections • Digital Stop Clock: Portable With Start / Stop & Reset Operation • Set Of Necessary 4 Mm Spring Loaded Patch Cords For Interconnections • Detailed Instruction Manual Supply To Be Connected: 230V, 1Phase, 50 Hz, Ac Mains , Experimental Set-Up For Calibration Of A 3-Phase Watt Hour Meter With Following Specifications: • To Adjust & Calibrate A Three-Phase Energy Meter By Direct Loading Method • To Adjust & Calibrate A Three-Phase Energy Meter By Comparing With A Sub-Standard Meter Specifications: Static Energy Meter Three Phase: Under Test (Local) Duly Mounted, Wired And Terminated Static Energy Meter Three Phase: Sub-Standard Meter (Isi Mark) Duly Mounted, Wired And Terminated Voltmeter: Moving Iron Ac Portable Of Class 1.0 Accuracy And Range 0 - 300 V Ac Ammeter: Moving Iron Ac Portable Of Class 1.0 Accuracy And Range 0 - 10 A Ac Wattmeter: Dynamometer Type Ac Single Phase, Multi-Range With Current Coil 5 / 10 Amp And Potential Coil 75 / 150 / 300 V Ac Variac: Variable Voltage Transformer (Portable – Table / Floor Mounting Type With Enclosure) Input: 230V Ac And Output: 0–270V / 8 Amp Ac Variable Load: Made Up Of 3 Load Resistors Of 70 Ohms / 700 W Each Duly Mounted And Connected / Terminated To Form Different Loads (35 To 210 Ohms) As Per External Connections Digital Stop Clock: Portable With Start / Stop & Reset Operation Set Of Necessary 4 Mm Spring Loaded Patch Cords For Interconnections Detailed Instruction Manual Supply To Be Connected: 440 V, 3-Phase, 50 Hz, Ac Mains , Experimental Set Up For Calibration Of An Lvdt Using Screw Gauge With The Following Specifications: Measurement Range 10/20 Mm Excitation Frequency: 2.5 Khz Sensitivity: 10 Mv Dc/ Mm Linear Range: Full Scale Signal Conditioner Output: 0.1 V Dc Or Maximum Displacement Display: 3 1/2Digit Led With Polarity Indicator Micrometer Least Count: 0.01 Mm Inbuilt Regulated Dc Supply Power Supply: 220 V, 50 Hz With Standard Accessories , Experimental Set Up For Temperature Measurement And Calibration Of A Thermocouple Sensor With The Following Specifications: K Type Thermocouple With Digital Panel Meter Output For Monitoring Test Pins For Monitoring At All Stages Mercury Thermometer & Heater 10 Watts (Optional) 3.5 Digit Dpm As Temperature Indicator Interconnection: 2/4Mm Banana Sockets Dc Supply: Built In Ic Regulated Power Supplies 220V±10%,50Hz Mains Operated With Standard Accessories , Experimental Set Up For Calibration Of A Load Cell Sensor With The Following Specifications: Bridge Made Up Of 4 Strain Gauges Mounted On A Specially Alloy Materials Type Load Cell Built In Excitation Voltage For The Bridge 3.5 Digit Ssd For Direct Reading Stain In Kg. Built In Precision Signal Amplifier. Multi Turn Potentiometer For Zero Adjustment. Different Loads To Be Provided For Building Up Of Load. Test Pins For Monitoring At All Stage Outputs. Interconnection: 2/4Mm Banana Sockets Dc Supply: Built In Lc Regulated Power Supplies 220V ±10%, 50Hz Mains Operated With Standard Accessories , Experimental Set Up For Temperature Measurement And Calibration Of An Rtd Sensor With The Following Specifications: Mercury Thermometer And Heater 10W Rtd(Pt-100) Probe With Protect Cover Bridge Circuit For Transducer Differential Amplifier With Feedback Lead Compensation System Sockets To Be Provided To Study The Process To Find Out The Error Rate 3.5 Digit Digital Panel Meter As Temperature Indicator Interconnection: 2/4Mm Banana Sockets 220V, 50Hz Mains Operated With Standard Accessories , Experimental Set Up For Calibration Of A Bourdon Tube Using Dead Weight Tester With The Following Specifications: Instrument Oil Is Sae 10 Or 20 Or Equivalent. Plunger Element Is Clamped In An Ms Block. Block Is The Junction For Screw Assembly, Pressure Gauge And Oil Cup. Valves To Be Used At The Bottom Of The Pressure Gauge And Oil Cup To Control Oil Flow. The Unit Is To Be Mounted On A Base Plate With Three Leveling Screws. Different Known Weights To Be Provided For Calibration Experiments. With Standard Accessories

Contract Date: Apr 01, 2026 Contract Value : ₹ 3.00 Lakh

Boards / Undertakings / PSU No of Bidders 1

West Bengal View Result →

31.

Power #9916868 AOC

Bids Are Invited For Testing Service For On-Board /Commissioned Equipment/ Instrument Related To Plant - Electrical; Custom Filter, Deputation Of Service Engineer From Ms Bhel For Pss Tuning Of Excitation System Of Generating Unit 2 And 4 Of Chutak Power Station; Bharat ..

Contract Date: Ref. Documents Contract Value : ₹ 23.57 Lakh

Government Departments No of Bidders 1

Jammu And Kashmir View Result →

32.

Defence #9897001 AOC

Contract Date: Mar 20, 2026 Contract Value : ₹ 24.40 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Punjab View Result →

33.

Educational and Research Institute #9832816 AOC

PROCUREMENT OF MACHINERIES, INSTRUMENTS, TOOLS AND EQUIPMENTS ETC. RELATED TO ELECTRICAL ENGINEERING AND ELECTRONICS AND TELECOMMUNICTION ENGINEERING LABORATORIES AND WORKSHOPS OF MATHABHANGA GOVERNMENT POLYTECHNIC, MATHABHANGA, COOCH BEHAR, WEST BENGAL- 1 ANALOG ELECTRONICS LAB-I (3RD SEM) 2 50 MHz Dual Channel CRO• Automatic Measurements of Signal Parameters like .Pk-Pk, Average, Max. , Min., rms, top etc. Voltages and Frequency, Period,Width,Duty Cycle, Rise Time, Fall Rime • Waveform and Set up storage facility.• Colour Display. • Advanced features like sequential acquisition of up to 1000 trigger events should be possible.• Standard USB Host & Device Connectivity. • Standard 23 Automatic Measurement andMath Function Including FFT.• Education student Lab guide and professor slide set.DETAILED TECHNICAL SPECIFICATIONS:-a)No. Of Channels:2b)Bandwidth :50 MHzc)Maximum Input:400 V (peak ac + dc) d) Sample Rate :1 GSa/sece)Waveform Update Rate : 400 Waveforms/secf)Memory : 16 Kpts/Ch.g)Time Base : 5nsec / div. To 50 sec./div.h) Resolution : 8 bitsi) Display: 5.7 inch Colour QVGA TFT LCD Display.j)Trigger Modes: Force, Edge, and Video, Pulse width.k) Built In Interface : Standard USB 2.0 (Host and Device)l)Power Supply: 230 V AC Supply, 50 Hz. 3 Function Generatori)Itshould be a waveform / function generator which can be upgraded to an arbitrary waveform generator . It may also have the feature upgrade the frequency of operationii) Should have low harmonic distortion and jitter.DETAILED TECHNICAL SPECIFICATION:--• Frequenc : 1Hz. to 20 MHz for Sine , Square and PulseWaveforms and 1 Hz. to 20 MHz. for Noise• No. of Channels: 1• Frequency Resolution : 1Hz.• Amplitude : 1 mVpk-pk to 10 v (pk - pk) in 50 ohms. • Duty Cycle for Pulse : 0.01 % to 99.99 %• Standard Waveforms: Sine,Square,Ramp,Pulse,Triangle,•Operating Modes: Continuous,Modulate,. .• Modulation Types: AM,FM,PM,FSK,BPSK,PWM• AM : Source both Internal & External, Depth 0 to 120 %With 0.01 % resolution.• FM : Source both Internal & External, Deviation 1Hz to 15 MHz• PM: Source both Internal & External, Deviation 0 to 360 deg C.• PWM : Source both Internal & External. Deviation 0 % to 100 %.• Power Supply : 230 v,50 Hz. ac. 4 Digital MultimeterDC Voltage:400mV to 1000V , AC Voltage: 400mV to 1000V,DC Current: 4mA to 10A, AC Current: 4mA to 10A, Resistance: 100 ohm to 40Mohm, Resistance: 100 ohm to 40Mohm,Capacitance: 4nF to 200µF, Duty Cycle: 0.1% to 99.9%, Frequency: 10Hz to 10MHz, Temperature: 20oC to 750oC,Transistor Test: Yes (for NPN & PNP), Diode Test: Yes, Continuing Buzzer: Yes, Power Supply: 9V, Manual and Auto ranging,Display: 4½ Digit 5 To study the V-I characteristics of UJT Trainer kitVariable DC Power Supply 1.2V to 12V/500m,A DC Power Supply for DPM 5V/500m,A UJT (2N2646) UJT Characteristics UJT Relaxation Oscillator with two different Timing Capacitors ,DigitalMeters for Measuring Voltage and Current ,Set of Patch Chords & User Manual 6 To study the input and output characteristics and to find the h-parameters of a BJT for : —(a) C-E configuration,(b) C-C configuration,(c) C-B configurationHARDWARE SPECIFICATIONS :Dual Variable DC Power Supplies 0V to 12V/500mA and0V to 15V/500mA DC Power Supply for DPM 5V/500mAIndependent Base Limiting Resistors - 2 Nos.(low value) Independent Collector Resistor - 1 No. Transistor( NPN Type SL100) .All Inputs/Outputs through 2mm Sockets set with provision of Digital Multimeter for measuring input and output. 7 ANALOG ELECTRONICS LAB-II (4TH SEM) 8 Feedback Amplifier Trainer12 V DC supply with +/- 10%accuracy,configurable circuit,Inbuilt sine wave generator with frequency range 10 Hz to 10 KHz rangeand Amplitude variation 10mV to 4V, NPN transistor. Voltage Series & Shunt and Current Series & Shunt configurable operation. 9 Oscillator Trainer KITi) Hartley, Colpitt ,Wien Bridge Oscillator Trainer kit : i) NPN Transistor ii)On boardoscillator section,separate tank circuit (iii)Biasing Voltage :+12 V , -12 V ,+12V SMPS Adaptor provided with the trainer for power supply.Designed by considering all the safety standards. Provided with an extensive manual.Power Supply to Kit: 230VAC,50Hz, All interconnections are made using 2mm banana Patch cords 10 To determine the following characteristics of op-amp: —a) input offset voltage, b) slew rate, c) non-inverting gain, d) inverting gain e) adder, f) subtractor, g) differentiator, h) integratorandi) voltage followerTo adjust offset null, setup the closed loop amplifier using IC741 op-amp also to (a) dc gain (b) ac gain. The set complete with +/-12V DC regulated power supply with milli voltage source, Null arrangement and 2V/20V dual range digital voltmeter , In built sine wave,triangular wave & square wave Generator of1 KHz, 15V Vpp (approx.), DC Power Supply : 0 - 5 V (vary through (2No.) rotary switch for specific voltage level 11 DIGITAL ELECTRONICS LAB (3RD SEM) 12 Complete setup to implement encoder, decoder ,multiplexer andde-multiplexer5V D.C. at 100mA, IC regulated power supply,21 Input Switches for data input,IC For Multiplexing 74150 is provided on board with Combinational Circuit, IC For Demultiplexing 74154 is provided on board with Combinational Circuit, One Not Gate is provided on board using 7404 ,16 Output LEDs with driver circuit to observe the output of Multiplexer Demultiplexer, A Pulser to provide the pulses manually for triggering,230 V ±10% at 50 Hz A.C. Mains,necessary patch cords and user mannuals. 13 Complete setup to design / construct parity generator, checker andcomparatorDC Regulated Power Supply 5 VDC/150 ma,5 SPDT switches provided for selecting logic ‘1’ & logic ‘0’,2 output indicators,Sufficient no of 4mm Patch Cords for Interconnection,Power Cords 230v, 50Hz,necessary patch cords and user mannuals. 14 Complete setup to design / construct binary synchronous and asynchronous counterTrainer kit for binary Synchronous and Asynchronous counter. with power supply, display unit, patch cords, manuals and necessary IC. 15 Digital I.C TesterUniversal IC tester: 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display, suitable for testing of Analog IC, Digital IC and 7-segment display. 16 A/D & D/A Converter TrainerFEATURESAnalog To Digital Converter• 8-bit descrete ADC•12-bit monolithic ADC IC•On-board signal generator with adjustable amplitude levels•On-board LED bank to observe digital outputs•Power supply : +5V, ±12V GND•Interconnection is provided by 2mm connectors•Experimental manualDigital To Analog Converter•8-bit binary weighted resistors DAC•8-bit ladder type D to A converter•8-bit D to A converter using monolithic IC•Simple construction using Op-Amp and resistors•Onboard switches are provided for digital pattern generation•8-bit digital inputs ranges from 00 to FF•Variable frequency counter to study the settling timeSPECIFICATIONS•8-bit binary weighted and 4-bit ladder type DAC are constructed using discrete components•8-bit monolithic DAC having settling time in the range of ns, wide power supply range, low power consumption, full scale error ± 1LSB•8-bit digital ramp ADC constructed using discrete components•12-bit monolithic ADC having conversion time in the range of μs, industry standard pin out, wide input range•8 onboard switches to provide digital inputs to DAC•8-bit counter running on external clock frequency to study settling time of DAC• Built inlow frequency clock generator•1 KHz sine wave with adjustable amplitude level•Onboard variable DC voltage source for studying unipolar and bipolar modes of ADC •12 output LEDs to observe ADC outputs•ADA operates on DC power supply (+12V,-12V,+5V and GND)•Interconnection is provided by standard 2mm connector•Extensive experimental manual is provided with the kit EXPERIMENTSAnalog To Digital Converter• To study and measure resolution of ADC•To measure the conversion time of the ADC•To study full scale adjustment for unipolar and bipolar signals•To study the working of ADC 17 NETWORK ANALYSIS LAB ( 3RD SEM) 18 To study the series and parallelresonant circuitIndependent Resistors - 3 Nos. ,Independent Capacitors - 3 Nos.,Tapped Inductance. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User ManualWITH SIGNAL GENERATOR, COUNTER, DIGITAL METERS FOR INPUT & OUTPUT and user manual 19 To test and to measure the cut –off frequencies of the following: —(a) constant k-type low pass filter;(b) constant k-type high pass filterTwo Independent Passive LC Filter Networks (LPF & HPF) All Inputs/Outputs through 2mm SocketsSet of Patch Chords & User Manual 20 To study standing wave pattern for a transmission line of finite length with:(a) open termination,(b) shorted termination andmatched termination. 2.To measure the attenuation constant and phase shift constant for matched terminationTransmission Line Trainer Features:* 30-300 Mhz sweep source with detector* Calibrated attenuator* Displays standing waves/maxima-minima on CRO* Uses actual coaxial lines rather than simulated ones.* Impedance matching.* Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR.* Measure parameters of 50, 75 and 300 Ohms cables* Study Time Domain Reflectometry.* Study location and nature of discontinuities,Open/short, mismatched terminations, etc.* Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior.Technical Specifications:A. Frequency Domain AnalyzerFrequency range : 30-300 MHz typical LCD Display. Level : 100mV p-p Attenuator 50 Ohms : 0.5, 1, 2,4, 8,15 dB,Output Impedance : 50 Ohms Scope out : X-Y output to scopeB. Resistive Impedance Analyzer ,Characteristic Imp. : upto 800 ohms ,Display : LCD C. Time Domain ReflectometerPRR Short range : 10MHz typical,Pulse width : <10ns typical, PRR Long range : 100KHz typicalAmplitude : 1V nominal, Output Impedance : 50 OhmsAccessories:Lengths of 50 ohms and 75 ohms coaxial cable, 300ohms, parallel line, lossy line, Tee connectors, ,Standard load of 50and 75 ohms, Various capacitive and inductive loads, shorts, Balun 1:1 & 1:4, Operating manual, Mains cord 21 COMPUTER PROGRAMMING LANGUAGE LABORATORY (3RD SEM) 22 Computer Programming Language LaboratoryTURBO C++ Software 23 MICROPROCESSOR LAB (4TH SEM) 24 8085Microprocessor Trainer KitHigh performance 8085A CPU operating at 3 MHz.16 K powerful monitor FIRMWARE expandable to 32 K. 64 K user RAM. Expanded RAM accessible using bankWrite protect facility for RAM. 3.6 V Ni-Cad battery back up. Versatile Keyboard/Display controller using 8279. 24 highly reliable dual function keys. 6 digit seven segment LED display.Parallel I/O lines available through two 8255 chips. Serial I/O through 8251 USART, with on-board level shifters 1488,1489.Programmable communication parameters. Built-in audio cassette interface.3 channels of 16 bit timer/counters from 8253.Powerful 8085 interrupt capabilities. On-board EPROM programmer with ZIF socket for programming 2716 to7512 EPROMs and various EEPROMs. Normal and intelligent programming modes.On-board ADC,DAC, opto-isolator, reed relay and miniature speaker. On-board logic probe.Single stepping, break pointing and machine cycle single stepping facility. Monitor functions can be called through software interrupts. Large collection of application software provided. All address, data and control lines from the CPU, buffered and brought out on 50 pin connector. Additional Stepper motor of specification:Shaft type: 5 mm DCurrent rating: 1200 mA2Voltage rating: 4 VHolding torque: 44 oz·inSteps per revolution: 200Resistance: 3.3 Ohm2Inductance per phase: 2.8 mHNumber of leads: 6Lead length: 30 cm 25 Microprocessor 8086 Trainer KitINTEL 8086CPU AT 4.77 MHZ CLOCK SPEED,16KB for monitor EPROM upgradable to 64kb16KB RAM expandable to 64KBBattery backup provision for RAM upto 64KB16 x 2 (or) 20 x 4 Alphanumeric LCD display101 keys IBM compatible keyboard24 TTL I/O lines brought out to two nos., of 26 pin FRC connector1 number of standard RS232C compatible serial port brought out to a pin D type male connector.3 channel 16 bit counter/timer using 8253.Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB seriesof experiment boards and bus expansion.8 no’s of interrupt lines are terminated at a 10 pin connector.Kit operates with a single +5V/DC supplyThe kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover.Built-in line assembler & DisassemblerPowerful debugging monitor to develop user program. 26 ELEMENTARY COMMUNICATION ENGG. LAB 27 To study the amplitude modulation and demodulation Ttrainer kit Features of Amplitude Modulation and Demodulation Trainer:On-board message signal with variable Amp/Freq On Board carrier signal with variable Amp/Freq AM Modulation using MC 1496 IC Demodulation using Diode Detector and LPF,6th Order LPF,Op Amp Based Variable AmplifierInternal Power Supply +5V , +12V/ 500 mATechnical Specification :Message Signal:Sine wave Frequency 100 Hz to 2.8 KHz, Amplitude 0 to 3VCarrier Signal: Sine wave Frequency-28 KHz to 108 KHzAmplitude 2V,Modulation : Balanced ModulatorAmplifier : Op Amp BasedDemodulation : Diode Detector & LPFLow Pass Filter : 6th Order LPFSupply Voltage (Board) : +12V, +5V / DCSupply current : 100 mA (Minimum)Input Voltage : 230 V/ 50 Hz ACInterface connectors : 2mm socket 28 AM/FM Radio Receiver kitFrequency range: 400KHz ~ 1.5MHzIntermediate frequency: 455KHzInputs: RF signalOutput IF frequency: 455KHz adjustableIF filter: Dual tune LC, RF amplifier with variable gain ,Mixer (frequency converter),Local oscillator:Output Signal: Sine waveFrequency range: 400KHz ~ 1.5MHz ,Amplitude: Adjustable from 0Vpp ~ 2VppOutput impedance: 50 Ohm ,1st and 2nd IF amplifierCentral frequency: 455KHz, Load impedance: Variable R-L-CGain: 40db with automatic gain control, Diode envelope detectorDetection of the envelop with variable RC filter. Audio output:Amplifier with audio jack, Audio amplifier gain: 26Db, Receiving media :MW coil antennaFM radio receiver, Reception range: 88MHz ~ 108MHz with continuous tuningTuning circuit: Using GANG capacitorIntermediate frequency: 10.7 MHz with ceramic filterEXPERIMENTS:Study of double sideband AM reception using envelope diode detector,Study of single sideband AM reception using product detector,Study of image frequencies,Study of adjustment of receiver tuned circuits,Voice reception using DSB/ SSB AM receiver (super heterodyne receiver)Effects of switch faults FM detection output level: 77.5Vrms (typical)FM detection output distortion factor: 0.3% (typical)Audio amplifier: Gain up to 46DbReceiving media: Adjustable telescopic antennaPower supply: -12V,+12V,+5V,GNDOutput volume regulation, output load impedance of 8 OhmEXPERIMENTS AM radio receiverTo study AM radio receiverTo study of image frequencies for AMFM radio receiverTo study FM radio receiverTo measure the frequency response of Audio amplifier 29 Pulse code Modulation and Demodulation system trainerInbuilt variable DC and 1 kHz AC Modulating Signals, Facility for applying external AC or DC Modulating Signal, Modulating circuit consists of a Positive Clamper, Sample and Hold (S and H), Analog to Digital Converter (ADC), Parallel to Serial Converter and Control Signal Generator, Observation of binary coded analog information by the LED status for both Modulation and Demodulation, PCM Modulation technique using IC, Built-in Pulse Code Demodulation circuit using a Serial to Parallel Converter and Parallel Shift Register DAC, Low Pass Filter for both AC & DC, Observation of Modulated & Demodulated waveform, Provision to monitor output on CRO, Clock to be provided from the Pulse Code Modulator to Demodulator circuit, Built-in IC based DC Regulated Power Supply with indication for power ON & fuse, 4 mm Patch Cords – 4 nos, Supply required 230V, 50 Hz and 1 phase AC, Comprehensive instruction manual complete with theory and operating details. 30 Frequency Modulation andDemodulation kitFM Modulators :Audio Oscillator : Sine wave (10Vpp adjustable) Frequency (300 Hz - 3.4 KHz) FM Modulators : 3 nos. • Reactance Modulator : Carrier Frequency - 455 KHz (± 3KHz) Varactor Modulator : Carrier Frequency - 455 KHz (± 2KHz) VCO Based Modulator : Carrier Frequency - 10 KHz - 200KHz (adjustable) ,Mixer / Amplifier adjustment FM Demodulator:Detuned Resonant DetectorQuadrature DetectorFoster-Seeley DetectorRatio DetectorPhase-Locked Loop Detector (IC HEF4046 based)Phase-Locked Loop Detector (IC LM565 based), Low Pass Filter : 3.4 KHz Cut off Frequency Amplifier (with adjustable gain) 31 DPCM & ADPCM MODULATION / DEMODULATION KITDPCM & ADPCM MODULATION / DEMODULATION KITOn Board Signals:. Frequency: 500KHz, Amplitude: 0 to 4 v pp 32 CONSUMER ELECTRONICS LAB (4TH SEM) 33 Black & White TV Trainer kit with provision of fault findingSystem: CCIR-B, 625 lines, Power supply :230V Ac, 50 Hz, Regulation range170v Ac to 270v Ac.,Power consumption :70 watts,Gain Limited sensitivity:55 dB for Video & 25 dB for AudioSound output :2.0 watts maximum. Screen size :20 Diagonal. Channel :VHF 2 to 12, UHF 21 to 68,S-band and Hyper-band. Isolated shockproof chassis. Sections:Electronic tuner, VideoI.F Section, Sound I.F, Video amplifier, Horizontal oscillator, Horizontal driver and EHT, Verticaloscillator, and output, S.M.P.S power ,Controls: Volume, tone, Brightness, contrast. Distortion :10 to 15% in Live program due to expanded P.C.B. All parts are soldered on Tags on SINGLE PCB of size 19x15” with complete circuit diagramSCREEN PRINTED in different colors with FAULT CREATING FACILITIES to create more than 25 faults. Standard Accessories : 1. Frame with PCB mounting.2. Picture tube fitted in wooden cabinet 3. A Manual having 20 practical. 34 DTH TV and SET TOP BOX TRAINER KITPower supply 230 V ,50 Hz, Input frequency: KU Band, Output frequency: 950-1450 Mhz.Noise temp: 35 degree,DISH ANTENA ,LNBIF FREQUENCY: 70 MHz 35 Colour TV Trainer with provision of fault findingStandard : CCIR-B-PAL-G, 625 Lines Channels : 230, 2 - 4 VHP I (VL), 5 - 12 VHP III (VH), 12 - 100 : BAND IV & V, else : S BAND & HYPER BAND Picture Tube Size : 36 cms. Diagonal RF Input Impedance : 75 W (Ohm) 36 DIGITAL & MICROWAVE COMMUNICATION ENGG. LAB 37 Spectrum AnalyzerFrequency range:9 KHz to 26.5 GHz,Phase noise :-102dBc/Hz, Max third order dynamic range, 1 GHz: 111dB, Displayed average niose level,1GHz:-163dBm,Standard attenuator range/step:50dB/10dB,70dB/10 squaredb,Overall amplitude accuracy:+/- 0.50dB 38 Antenna Trainer 86 - 860 MHZSPECIFICATIONS:Radiation pattern plotting software• Stepper motor controlled receiver stand.Antenna Measurement System:RF Source•Source types :PLL Synthesized with integrated VCO• Frequency range :100MHz to 3GHz• Dynamic range :85dBm• Transmitted power min:-50dBm• Transmitted power max:+5dBm • Impedance :50W / SMA RF Detector• Detector type: logarithmicdetector• Frequency range : 1MHz to 8GHz• Resolution: 0.1dB• Dynamic range : 85dB (±3dB)• Noise level : -90dbm• Impedance: 50W /SMA• Representation of RF level : dBmDisplay•128x64 Graphic LCD Display with backlit. Keypad•15 Key Membrane Keypad for user entry.Stepper motor controller•1.80 Resolutions.List of Standard 22 Antenna Suppliedwith the setupWire Antenna1.Monopole Plane base ground2.Dipole (2nos.) 3.Yagi4.Folded Dipole 5.Vee Dipole6.Rectangular Loop 7.HelicalMicrostrip Antenna 1.Planar Dipole 2.Planar Monopole3.CMSA 4.TMSA5.2X1 ARRAY 6.Annular ring7.Chip Antenna8.RMSA9.RMSA- Circular PolarizedAperture Antenna 1.E- Horn2.Open ended Waveguide Rectangular Array Antenna 1.Broadside Array2.Collinear ArrayReflector Antenna 1. Corner reflectorSOFTWARE• Radiation pattern plotting and analysis software suitable for windows environment Antenna PositionerThe Transmitter and Receiver Antenna stand is made of special material which is inhert to EM frequency and it has engraved height and angle scale on It. It has facility to adjust the height and level. Universal plug and fix Antenna mounts are provided to hold the antenna assembly in vertical and horizontalorientation for co and cross polarization.ACCESSORIES • SMA (M) to SMA (M) 50W flexible cable : 02nos• USB cable ( Male A to Male B): 01no• 3 Pin 6 Amp Power chord: 01no • Manual : 01no • Software on CD: 01no EXPERIMENTS• Measure the variation of field strength /inverse square law• Prove the reciprocity theorem of antenna• Plot Radiation pattern of WIRED Antenna Omni directional antenna• Plot Radiation pattern of all Aperture Antenna• Plot Radiation pattern of all Reflector Antenna• Plot Radiation pattern of all Array Antenna• Measure co-polarization, cross polarization 39 Microwave Test Bench (KLYSTRONBased)Klystron Power Supply: Specifications:Input Voltage -230V+/- 10%, 50Hz AC, Beam supply- Voltage:200-450V continuously variable; Current:Regulation: better than 0.5% for +/-10% variation in mains supply voltage; Ripple: less than 5mV rms ,Repeller Supply -Voltage:-10V to -270V continuously variable with respect to klystron cathodeRegulation: better than 0.25% for +/-10% variation in mains supply volt , Heater Supply - 6.3V DC (regulated)Modulation- Square Wave : Frequency 500Hz to 2000Hz; Max. Amplitude- +110V peak to peak, Amplitude and frequency continuously variable; Sawtooth- Frequency 50Hz to 150Hz; Max. Amplitude- 60V peak to peak, Amplitude and frequency continuously variable.VSWR Meter: (Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Power : 230 Volts AC, 50Hz, mains supply) 40 ASK / PSK / FSK Modulation And Demodulation KitFEATURES•VLSI based design •Separate component and operational area •Acrylic cover for component safety •Modular organization of circuit functions •Test points to access signals at every stage of circuit operation •Multimedia based interactive e-manual Data Simulator: Onboard 8-bit variable NRZ-L pattern,Crystal Oscillator: 32.768 MHz,Data Clock: 256 KHz,Data Format: NRZ (L),Onboard Carrier Sine Waves : 1MHz (0°), 1MHz (180°), 500 KHz (0°),Power Supply: +12V, -12V, +5V, GND. 41 Microwave Test Bench (GUNN Based)Gunn microwave test bench:Gunn Power Supply (0 - 12 Volts variable,1 Amp. Max,Modulation Frequency: 1KHz +/- 10% (900-1100 Hz),Output Connector: BNC(F) for Gunn Oscillator & TNC(F) for Pin Modulator,Modulation: Square Wave, Frequency : 500Hz to 2000Hz)• Gunn Oscillator • Isolator• PIN modulator• Variable attenuator • Detector Mount• SWR meter(Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Powe : 230 Volts AC, 50Hz, mains supply) 42 1 GHz spectrum Analyser1 GHz spectrum Analyser with tracking generatorFrequency range: 150 KHz to 1000 MHzFreqency Resolution: 1 KHz CF entry 40 Hz sweep resolution at 2 KHz per Division,Frequency Display: 61/2 digitFrqency Control: Digital Phase LockResolution Bandwidth: 3 KHz, 30 KHz, 220 KHz, 4 MHz. 43 INDUSTRIAL ELECTRONICS LAB -I (5TH SEM) 44 Trainer Kit to study Reverse Recovery Characteristics of Power DiodesThe single Board trainer Kit should contain IC Regulated Power Supply, Different types power diodes, Digital Ammeter and Voltmeter and other necessary passive components 45 To study drive circuit of SCRIsolated 230 V/40 W AC Power Supply1.2 V to + 15 V/500 mA DC Power Supply* 0-18 V/500 mA,50 Hz, AC Power Supply* Variable frequency triggering pulses* DC Gate signal control, Pulse gate signal * Synchronous AC gate control signal through DIAC* UJT Triggering* 10:1 On- board resistive attenuator * Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 46 To study a single phase rectifier—output waveform with phase control circuitTrainer Kit to study Single Phase Full wave Bridge Rectifier for fixedDC output, Half Controlled and fully controlled rectification facilities with R and RL, loads 1000 Ohms 10 Watts, 14 ma @ 0.05 A inductive loads.The Single Board Trainer Kit contains :(i) Source for rectification of 4 to 24 V DC fixed and variable output @ a max of 500 ma helps to construct and study Series and Parallel resonance Circuit.(ii) Four Diodes and 4 SCRs in bridge configuration with gradual firing controls and necessary capacitive, inductive and Pie filter components.(iii) Digital Ammeter and Voltmeter. 47 To study a polyphase rectifierIsolated 230 V/40 W AC Power Supply Isolated stepped down 3 PH supply. * 3 Phase diode rectifier in open condition*Provision for Load& CRO output.* Electronic phase sequence finder.*Set of Patch Chords & user Manual 48 INDUSTRIAL ELECTRONICS LAB-II (6TH SEM) 49 Servo Regulator Stabilizer Study Kit500VA Servo stabilizer , 2 Amp Variac, Digital input & output meters, Lamp load, Set of Patch Chords & userManual. 50 To study a Jones chopperIsolated 230 V/40 W DC Power Supply, + 5 V/500 mA DC Power Supply* SCR Jones chopper* Gate firing pulses for Jones Chopper* 10:1 On-board Resistive Attenuator* Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 51 To study speed control of induction motor by voltage and frequency variationV/F CONTROLLER 1 HP, AC SQ. CAGE IND. MOTOR 1 HP,DIGITAL VOLT & AMMETER. 1 PHASE I/P & 3 PHASE O/P,3 PH & 1PH MCB PROTECTION 52 To study the speed control of DC motor by:(a) varying field current keeping armature voltage constant; and,(b) varying armature voltage keeping field current constant DC SHUNT MOTOR (FULL COPPER WINDING) .5 HP WITH BASE MOUNT FRAME 1 No VARIAC CONTROLLED 2 DC POWER SUPPLY ( 1 FOR FIELD & 1 FOR ARMATURE)DC VOLT & AMMETER DIGITAL………4 NosPANEL MOUNTED RPM METER………1 No.WHITE BAKELITE FRONT WITH CONN. DIAGRAM & WOODEN SAFETY BOX.METAL FRAME TABLE (Ply board with sun mica) CUM STAND FOR PANEL 53 Power Electronics Devices Trainer KitShould have Built in power supplyDC supply : +/- 12V, 500mA,Power supply 17V / 750mA,Regulated 13.5V/3A O/P mustbe provided as 12V Battery charging supply. Isolated DC supply +12V/ 300mA with isolated common.On board Inverter transformer of Primary : 230V & Secondaries 12-11-0-11-12/3AOn board Lamp load of 15W (100W) should be provided.AC supply : 230V AC line voltage must be made available on two banana 4mm socketsMust have Two pulse transformers of 1:1:1 are provided for isolation & supplying firing pulsesalong with required DC Power supply to experiment panel under test through 15 pin female ‘D’connector.R-L-C Load PanelMust have Load resistor of 10W / 40W --- 1no.Must have Centre tapped 3A choke 4mH/ 16mH each ----2nos.Must have Commutation capacitors of 10mF/100V -------4nos.Must have AC Paper capacitor of 4mF/440V ---1no. 54 PLC Trainer (EXPERIMENT 1-Use of simulation package for different function of PLC. EXPERIMENT 2- Verify function of logic gates by using PLC. EXPERIMENT 3- Write and verify ladder program for motor ON-OFF Control with two push button)HARDWARE SPECIFICATION:TTL Input Switches : 8 Nos,TTL Momentary Switches : 8 Nos., Proximity Switch : 1 No.,Optical Transducer (two state) : 1 No., Programmable LEDs : 8 Nos., Analog input 0 to 5V DC : 8 channels, Analog output 0 to 5V DC : 1 No., 4 to 20mA Transmitter : 1No., 4 to 20mA Receiver : 1No., Current Meter : 25mA FSD 1No.,Voltmeter : 10V FSD 1 No., Piezo Electric Alarm : 1 bit.Built-in power supply.Dedicated I/O interface card suitable for IBM computer suitable for ISA slot. SOFTWARE SPECIFICATION:This is a GUI based LADDER LOGIC SOFTWAREDRAG AND DROP (D&D) an instruction instead of typing an instruction. This eliminates errors in typing. All the instructions are displayed ON-SCREEN during Design time. Each and every element is directly addressed with their NAMES not by numbers or codes, which are very difficult to remember. Ex: At design time, you call a SWITCH#0 in your Ladder program by D&D the component called SWITCH#0, and that’s it, not by typing a few digits numbers or codes.Appropriate LIST boxes (input, output) open as you D&D an instruction in LADDER WORKSPACE.Ladder workspace is 24X100 instruction CELLs are available for your use.TOOL TIP features are available at the end of each instruction prompting you “what to do next”Very user friendly.Extensive ON-LINE HELP menu available.GUI based STATUS of the entire PLC is displayed during RUN TIME.Programs are saved, retrieved, edited by simply clicking on Menu list box.Extensive EDIT features are available. 55 Power Electronics Development TrainerSize of Breadboard : 172.5 mm × 128.5mmDC Power Supply :+5 V, -5 V 500 mA,+12V, -12 V 500 mA+15 V, 250 mA+35V, -35V, 250 mAAC Power Supply :18V-0V-18V ,0V-15VOn board Firing CircuitsFrequency range : 30Hz to 900Hz variableAmplitude : 12VPWM control of G1, G2, G3 and G4Duty cycle control of “Gate”Signal is 0 to 100%SCR Assembly : 4 SCRs 2P4M, 400V/2APower Devices : IGBT-G4BC20S, MOSFETIRFZ44N,UJT-2N2646, DIACDB3,TRIAC-BT136, PUT-2N6027Circuit Components on board : Electrolytic Capacitor 10µF, 63V,Electrolytic Capacitor 1µF, 63V ,Met. Capacitor 0.33µF, 63V ,Diode 1N4007, Inductor 220uH, 4.7µH, 10mH.Pulse transformer on board :2 nos. PT4502 1:1 and one is PT4503 1:1:1Load selector : 6 load resistances- 47E/7W,1K/1W, 1K/10W, 10K/10W,120E/5W, 2K2/2W.Test points : 10 nos (Gold plated)Power Supply (Mains) : 220V/110V, 50Hz/60HzIncluded Accessories :Bread boards : 2 nos.Connecting wires : 20 nos.2mm to 1mm Patch cords : 15 nos.2mm Patch cords (Red) 16” : 4 nos.2mm Patch cords (Black)16’’ : 4 nos.2mm Patch cords (Blue) 16’’ : 12 nos.Mains cord : 1 no.with i) Power Semiconductor Application Experiment Panel ii)CON / INV Panel iii)Triggering circuit / dv/dt Protection panel 56 ELECTRICAL & ELECTRONICS MEASUREMENT LAB (6TH SEM) 57 Digital LCR meterVariable measured- L,C,R and loss angle (D factor ) Measured frequencies: 1 KHz, 100KHzDisplay: 3⅟₂ digit , Resistance: 0 to 20 MΩ, 0.1 Ω , Capacitance: 0 to 20000μF, 0.1 pF Inductance: 0 to 20000 H, 0.1μH ,D factor: 0.01 to 8.0 with 1% error 58 Distortion Factor MeterFrequency : 20 Hz to 200KHz Distortion:0.1% to 100% f.s.d. in steps ,Input sensitivity: 100mV (r.m.s.), Input impedance: 1MΩ/160pF, Voltmeter range: 300μv to 300v f.s.d. in 13 range 59 To measure L & Q by Maxwell methodFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 60 To measure the unknown capacitance by Schering bridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 61 To measure the unknown frequency by Wein BridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER WITH FREQ. COUNTER & CRO SIG. O/P INBUILT& CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., BACKLIGHT LED & WOODEN HARD BOX 62 MICROCONTROLLER AND EMBEDDED LAB (5TH SEM) 63 Microcontroller Trainer Kit 1.Write a Simple Assembly Programs fora. Addition b. Subtraction b. Multiplication d. Division2. Write a Programs for (any two of the following)i. 4 x 4 Matrix Keypad Interfaceii. character based LCD Interfaceiii. Analog to Digital Conversion (On chip ADC)iv. Serial EEPROMv. Seven Segment LED Display Interfacevi. Interfacing With Temperature Sensorvii. Stepper Motor Interface8 BIT EMBEDDED MICROCONTROLLER TRAINERFEATURES•Single board design with various resources•Excellent training platform for embedded applications•Software development tools include assembler and ‘C’ compiler•Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS•Experimental board for 40 pin MCS51 and AVR family of microcontrollers•In-system programming (ISP) facility for many microcontrollers•Double RESET signal with manual key•Crystal frequency: 11.0592MHz•On-board RS232 compatible serial interface terminated in a 9 Pin D female connector•4×4 matrix keyboard•16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment•Four 7-segment LED displays•I2C EEPROM (24Cxx)•Real time clock (DS1307) with lithium battery and SRAM•8-high current output port (500mA) for driving external loads•Two 12V sugar cube relays•Continuous tone piezo buzzer•Temperature sensor socket with thermostat functions•Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591•All port-pins available on 10-pin box header•8 LEDs for easy logic state monitoring•8 input trigger switches using 8 push buttons•ISP programming with Flash ISP for AT89S51/52/8252/AVR•Infrared remote control receiver module IC supported•P89V51RD2BN•AT89S52 Installable software on CD•Programmers notepad : Free, open source, text editor•Flash ISP programmer software for 89SXX•Bascom basic compiler (demo version)•MIDE-51: An IDE for MCS-51 microcontroller•WinAVR : open source C compiler for AVR•Sample programs for peripherals DC 12V/500mA output power supplyEXPERIMENTS• Study of LED blink• Study of dancing light• Study of LCD display• Study of LCD-keyboard display• Study of 7 –segment display• Study of RC5 remote control test program• Study of analog to digital converter• Study of real time clock (RTC) 64 ADVANCE COMMUNICATION ENGINEERING LAB 65 To be familiar with the following network components:THIS WILL BE A FULL PACKAGE OF THE FOLLOWINGS:-** RJ5/CAT5CABLES 100 METERSRJ 45CONNECTORS 100 PCSCUTTER & CRIMPING TOOLS FOR RJ45/CAT-5CABLESCABLE TESTER/TRACKER…….. 4 PCSHUBS WITH ACCESSORIES & TOOL KIT NETWORK INTERFACE DIFFERENT CARD 66 COMPUTER NETWORK LAB 67 Network ComponentsCAT 5/5E/6 cable :100mtrs (Rs 2000/-), RJ 45 Connectors: 200pcs (Rs. 500/- )RJ 45 Crimping Tools: 05(Rs. 800/- each)LAN Cable Tester (RJ 45): 05 (Rs 1000/- each) 68 24 Port managed switchNo. of Ports: 10/100 Mbps 24 Ethernet ports, Switch Fabric: 32 Gbps, Form Factor: Rack Mountable,OS: LAN base Image, Console port: Availavble for configuration, Mac Address table: 4000 or higher, VLAN: Supported, MTU: 9100 with support for jumbo frames, Warranty: 3 years onsite comprehensive warranty including parts and labor plus onsite technical support with 24x7 69 24 Port Unmanaged switch24-port 10/100/1000Mbps Ethernet switch Wifi Router: 300 Mbps wireless router with 4 LAN ports and 1 WAN port 70 8 port HubExternal Power Supply, 8 Nos RJ-45 connectors for 10BASE-T/100BASE-TX,Ethernet Ports 8-Port, Capacity 1.6 Gbps, Wireless Speed 10 / 100 Mbps 71 Access points54 Mbps Access point for wifi network: No.of Channel: Dual channel for support upto 108 Mbps ( 2x54Mbps), Backbone connectivity: connect over Fast Ethernet through backbone switches, Security: Security enabled Wifi connectivity with option for Broadcast of SSID,Network:802.11 a/b/g/n network support, PoE: PoE enabled, Form factor: Wall or ceilling mountable with physical lock suppor. Warranty and support: 3 years on site comprehensive warranty including parts and labour plus on site technical support with 24 X 7 72 LAN TrainerEthernet (IEEE 802.3 wireless LAN (802.11),Token bus ( 802.4) Token ring ( 802.5), Data rate : 10/100 Mbps for ethernet, 1, 2, 5.5, 11 Mbps for wirless & LAN as per IEEE 802.11b, connectivity through RJ 45 connector. 73 Installation & commissioning of network(i) Laying ofOFC & CAT 6 Cable (ii) splicing (iii) Installation & network testing 74 INSTRUMENTATION AND CONTROL LAB (6th sem) 75 To measure displacement with LVDT ACTUAL LVDT WITHINSTRUMENTATION AMPLIFIERDC O/P WITH DIGITAL METER, 3and 1/2 digit LED display with polarity indicator, sensitivity of 10mV/mm in the range of 10mm. 76 To measure temperature with thermocoupleTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 77 To measure temperature with thermistorTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 78 To measure pressure with strain gauge STRAIN GAUGE SENSOR WITH WAIGHT LOADING SYSYTEM SAMPLE WEIGHTS.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR 79 To plot the Characteristics of RTD (PT-100)RTD 3 WAIR SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 80 Temperature controller with on-off controller, Temperature controller with PI controller, Temperature controller with PID controllerTemperature controller with facilities for P, I, D and relay control blocks, Operating temperature: Ambient to 90°C, Separate controls for P, I, D channel gains,Two settings for relay hysteresis, Fast 25W oven fitted with IC temperature sensor, Forced cooling option to ready oven for next experiment, Digital display of set and measured temperature on a 3½ digit built-in DVM, 0-9999 sec, timer on panel for a convenient temperature response experiment, Buffered output for recorder 81 CIRCUIT THEORY LAB 82 Determine the permeability of magnetic material by plotting its B-H curveHysteresis Loop Tracer/ BH Curve apparatus220volt AC, 50Hz supply 83 Series parallel resonance of R-L-C cktKit for Series parallel resonance of R-L-C ckt: The Set-up consist of Power supply (with variable frequency), audio oscillator with digital readout, digital RMS meters and different number of inductors (smoothly variable), capacitors, Rheostat, patch cord & manual. 84 SWITCH GEAR LAB 85 Speed control of Induction motor 1ph by using SCR3Φ, 400V ac, 50HZ.,1HP, 1440 rpm. Speed control using ac back to back configuration of SCRs and to note Speed vs. Load Characteristics at open loop condition. This unit should consist of AC 3Φ Induction Motor (1HP) coupled with a (i) DC Shunt Generator (1HP) for loading and (ii) a DC Tachogenerator to be used for speed feedback control. A DC meter must be provided for displaying the speed of the motor from the Tachogenerator with suitable AC Ammeter and Voltmeter for the measurement (AE Make Panel Type or digital) Sheet Metal enclosure with powder coating paint must be provided. (with foundation & Experiment Table) 86 C.T. & P.T. testing trainer kit C.T. & P.T.testing trainer kit - Variable AC voltage source (0-220V)& variable AC current source (0-25A), CT for 25/5A, PT for 220/110V, Autotransformer for voltage & current adjustment, MCB protection, To determine Ratio error, Phase angle error of CT & PT, with Burden box. , polarity check indicator , range selector switch. 87 Induction type electromagnetic relay* Over Current (IDMTL Electro- Mechanical Type , Model CDG-11 or equivalent) Relay,*PSM, TSM setting* Auxiliary Relay,* Counter /Timer,* D.W. Transformer, * Variac,* Knife Switch,* DC power supply for DC auxiliary relay and the relay,* Portable Ammeter.Necessary panel for the complete set up with wooden (teak wood) table (4x3x2.5) 88 Air Circuit BreakerCut section model 89 Transmission line protection simulation KitOver Current, Earth Fault, Over Voltage, Under Voltage, Directional, Differential, Distance protection 90 POWER PLANT LAB 91 Diesel generator power plantmodel of small diesel generator power plant 92 Hydro power plantmodel of micro Hydro power plant 93 Horizontal axis small wind turbinemodel 94 CSP plantmodel 95 MEASUREMENT LAB 96 Kelvin double bridgeCompletely self contained, stand alone unit with built in power supply, required meters, Standard Resistance, wooden bench, high sensitivity spot light type galvanometer, connecting patch chords and operating manuals. 97 RENEWABLE ENERGY LAB 98 Renewable Energy Labsolar PV plant- Model 99 Renewable Energy Labvertical axis small wind turbine- Model 100 ELECTRIC MACHINE LAB 101 VoltmeterVoltmeter (M.I type) 0-150V/300V/500V 102 VoltmeterVoltmeter (M.I type) 0-20V/50V 103 AmmeterAmmeter (M.I type) 0-5A/10A/20A 104 AmmeterAmmeter (M.I type) 0-1A/2A/5A 105 MultimeterAnalog Multi-meter of ISI marked: DC : 0-200 mV/ 1000 V & 0- 2mA – 10 A,AC : 0 – 200mV/1000V &0-2 mA – 20 A, Resistance : 0 – 200 Megaohm, with shock proof protection & other facilities and operatingmanuals. 106 MultimeterDigital Multi-meter of ISI marked: DC : 0-200 mV – 1000 V & 0-2mA – 10 A,AC : 0 – 1000 V & 0- 2mA– 20 A, Resistance : 0 – 200 Megaohm, with diodetesting, data hold, shock proof protection , auto power off etcfacilities and operating manuals. 107 WattmeterDynamometer Wattmeterof ISI marked : Low Power Factor ( 0.2 ) : Current Rating : 5/10 A , Voltage Rating : 150/300 / 600 V , with anti-parallax mirror , 120 mm scale length , knife edge pointer, mouldedBakelite body, portable. 108 VoltmeterVoltmeter (PMMC type) 0-150V/300V 109 AmmeterAmmeter (PMMC type) 0-2A/5A 110 StarterDC 3-point Starter : 220 V DC , 15 A 111 StarterDC 4-point Starter : 220 V DC , 15 A 112 DC Power SupplyDC Power Supply : Input : 415V, #-Phase AC, 50 Hz;Output : 220V DC , 5 KW of a standard make . 113 RheostatRheostat with sliding Jockey : 100 Ohm , 5 A 114 RheostatRheostat with sliding Jockey : 500 Ohm , 5 A 115 Digital Energy MeterDigital Energy Meter of ISI marked: Three Phase AC , 440 V , Maximum 30 A, 50 Hz with operatingmanual. 116 Digital MeggerDigital Megger for measuring insulation resistance of ISI marked: 250 / 500 V, Maximum 200 Mega ohmwith operating manual 117 VariacSingle Phase Variac of ISI marked : Input:– 230 V AC, Output : 0 – 270 V AC , 1 KVA, 50 Hzof a standard make 118 VariacThree Phase Variac of ISI marked : Input:– 415 V AC, Output : 0 – 500 V AC , 3 KVA, 50 Hzof a standard make 119 Clamp on MeterClamp on Meter of ISI marked : Digital type : For measuring Voltage ( AC/DC ), Current ( AC/DC ) , resistance, Power & Power Factor with operating manuals 120 Phase Sequence IndicatorPhase Sequence Indicator of ISI marked : 50 – 500 V AC, 25 – 60 Hz 121 Frequency MeterFrequency Meter of ISI marked: Digital Type : 240 V, 47 – 99 Hz 122 TransformerSingle-Phase Transformer : 1 KVA , 230 V/115V , 50 Hz( Air Cooled) 123 TransformerThree-Phase Transformer : 3 KVA , 415/230 V , 50 Hz 124 3-Ph Resistive LoadThree phase resistive load : 400 V , 6 KW 125 3-Ph Inductive LoadThree phase inductive load : 400 V , 3 KW 126 3-Ph Capacitive LoadThree phase capacitive load : 400 V , 3 KW 127 3-Ph StarterStar Delta automatic starter for 3 Phase,400 V, 5 Hpmotor 128 3-Ph DOL StarterDOL & Auto -Transformer Starter : 3-phase AC , 400V, 10A, 50 Hz 129 StroboscopeDigital Stroboscope - 10,000 rpm 130 DCGenerator Voltage build UPSupply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Building up Voltage in DC Generator ( Open Circuit / Saturation Characteristics: DC Shunt Motor of ISI marked : 2HP or 5HP, 220 V. Machines will have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and operating manual isalso must.(with foundation & Experiment Table) 131 Brake test in DC Series Motor Supply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , Spring balance & loadings, protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Brake test in DC Series Motor& load Characteristics: DC Series Motor of ISI marked : 2HP, 220 V.Machineswill have to be set on M.S.Channel base with suitable footing/ fixtures and screws etc. and operatingmanual is also must.(with foundation & Experiment Table) 132 Speed Controlof 3-Phase Squirrel cage Induction motorSupply, Installation , Commissioning & Testing with necessary & suitable ISI marked meters such as ammeter, voltmeter, frequency meter , starter, protective devices and all other accessories mounted on a standing panel board as per following specification :For Speed Controlof 3-Phase Squirrel cage Induction motorby – (i) volt /freq control method : Three phase Squirrel cage induction motor : 2HP, 400V with v/f controller.Machineswill have to be set on M.S.Channel base with suitablefooting/fixturesandscrewsetc.includingtheoperating manual.(with foundation & Experiment Table) 133 Load Test of an Alternator & % regulation at various loads with Unity Power factorSupply, Installation , Commissioning & Testing with suitable ISI marked ammeter, voltmeter, starter, star connected load , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Load Test of an Alternator and Determination of%-age regulation at various loads with unity power factor : DC Shunt Motor of ISI marked : 3HP, 220 V , AlternatorISI marked: 2 KVA, 415 V , 50 Hz.Machineswill have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and andoperating manual is also must.(with foundation & Experiment Table) 134 Measurement of Slip of 3-Phase induction motorSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter, stroboscope etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :Measurement of Slip of 3-Phase induction motor by –(i) Stroboscopic& (ii ) Tachometer methods and reversing the direction of rotation of the motor : Three phase squirrel cage induction motor of ISI marked: 2 HP , 415 V , 50 Hz .Machineswill have to be set on M.S.Channel base withsuitable footing/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 135 Synchronization of two 3-Phase alternatorsSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification : Synchronization of 3-Phase alternator ( 2 SETS ) by– (a) Three Lamp & (b) Synchroscope Methods : DC Shunt Motors of ISI marked : 5HP, 220 V ,Alternators of ISI marked: 3 KVA, 400 V, 50 Hz.Machineswill have to be set on M.S.Channel base withsuitable footings/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 136 POWER SYSTEM LAB 137 KIT FOR STUDY OF ACTIVE & REACTIVE POWERWITH SIMULATIOL KIT & LAPTOPStudy of Active & Reactive power with simulator Kit and Laptop with appropriate software, The kit should consist of variable Inductive & Capacitive load to observe change in active & Reactive power 138 MODEL OF VARIOUS TYPES OF TURBINES USED IN POWER GENERATING STATIONSModel Piece of each type of Turbine 139 PYRANOMETERMEASUREMENT OF SOLAR RADIATION BY PYRANOMETER 140 PHOTO VOLATIC SYSTEM USED IN STREET LIGHTWITH SOLAR PLATE,PV CELL,BATTERY,CHARGER 141 STUDY OF POWER SYSTEM OF 6.6 KV/400 V SUBSTATION USED FOR A HOUSING CONPLEXMODEL 142 D.C NETWORK ANALYSERD.C NETWORK ANALYSER FOR STUDY OF DIFFERENT TYPES OF FAULTS 143 DIFFERENT TYPE OF EXCITATIONS SYSTEM USED IN ALTERNATORSTATIC EXCITER,SHAFT MOUNTED,ROTATNG TYPE EXCITER & Brushless exciter ( Model only) 144 MISCELLANEOUS 145 MOTOR-ALTERNATOR SET FOR SYNCHRONISATION OF TWO ALTERNATOR WITH SYCHRONISING PANEL INCLUDING CHECK SYNCHROSCOPE & BULB ARRANGEMENT TO PERFORM TWO BRIGHT ONE DARK LAMP METHOD1.TWO SET OF D.C MOTOR 2.5 KW,230 VOLT,3000 R.P.M WITH SPEED CONTROL ARRANGEMENT 2. TWO SET OF 1 KVA,3 PHASE,440 VOLT,3000 R.P.M ALTERNATOR WITH BASE MOUNTING & EXCITATION SYSTEM. 146 PlierPlier of good quality 147 TesterTester Screwdriver of reputed brand 148 Screwdriver setScrewdriver set of reputed brand

Contract Date: Mar 12, 2026 Contract Value : ₹ 33.87 Lakh

Government Departments No of Bidders 9

West Bengal View Result →

34.

Power #9775968 AOC

Tender For Mtps-I - Es Circle - Mrt– Unit-Iv - Tg Area - Aoh Maintenance Works To Be Carried Out For The Year 2025-26 - Electrical Valve Actuators, Generator Transformer, Uat A & B And Dvr EquipmentS In Tg Area; 1 Charges for cleaning, disconnection of power cables and control cables, terminal tightness checking of actuator terminal blocks, local push button and lubricating the limit switch mechanism. 2 Charges for reconnection of power and control cables, setting of open/close limit/ torque switches, testing of modules, motors and checking of operation. 3 Charges for power/control cable jointing works for actuator. 4 Charges for Cleaning of Converter cubicles, Field Breaker cubicles, Regulation Cubicle and Field Flashing cubicles, AC/DC racks, Air conditioner units, checking the tightness ofAC / DC bus bar joints, terminal blocks in Converter panels, Field Breaker panel and Regulation Panel . 5 Charges for Opening/closing time and contact resistance measurement works of Field breaker main and FDR contacts, testing of relays, transformers & timers, carrying out the modification works for conducting the dummy load test in the Digital Excitation System and measurement of Rotor DC resistance and impedance measurement at standstill, barring gear speed and various speeds during rolling of turbine. 6 Charges for transporting the testing equipment to transformer yard, assisting for conducting OCC, SCC tests on GT, UAT’s (A& B) and its NGT, terminal tightness checking in marshaling boxes, metering and protection CT’s.

Contract Date: Aug 30, 2025 Contract Value : ₹ 2.30 Lakh

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

35.

Power #9775535 AOC

Tender for Ttps - Es - Mrt I - Annual Overhauling Works Of Digital Excitation System,Grp,6.6Kv System And Lt System In Unit Ii For The Year 2025-26

Contract Date: Mar 02, 2026 Contract Value : ₹ 32,072

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

36.

Defence #9749510 AOC

Contract Date: Mar 06, 2026 Contract Value : ₹ 10.17 Crore

Statutory Bodies & Commissions/Committees No of Bidders 5

Tamil Nadu View Result →

37.

Defence #9709858 AOC

Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Fuel Barge Puran; Di/Dr On Stbd Da Rra And Excitation Panel Onboard Fb Puran At Nsry (Kar); Service Provider

Contract Date: Ref. Documents Contract Value : ₹ 2.14 Lakh

Government Departments No of Bidders 6

Karnataka View Result →

38.

Heavy Industries and Public Enterprises #9680054 AOC

Bids Are Invited For Programmable Logic Controller System For Excitation System As Per Bhel Specification No. Cee/24019 R Total Quantity : 3

Contract Date: Ref. Documents Contract Value : ₹ 6.33 Lakh

Boards / Undertakings / PSU No of Bidders 3

Madhya Pradesh View Result →

39.

Power #9633245 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Rajasthan View Result →

40.

Educational and Research Institute #9620451 AOC

Laser Systems For Rydberg Excitation In Rb Atoms , Laser System For Rydberg Excitation In Rb Atoms (1013 Nm Laser) , Laser System For Rydberg Excitation In Rb Atoms (420 Nm Laser) , Dual Wavelength Cavity Compatible To 420 Nm And 1013 Nm Laser

Contract Date: Feb 20, 2026 Contract Value : ₹ 3.63 Lakh

Government Departments No of Bidders 2

Uttarakhand View Result →

41.

Power #9593209 Technical Bid

Tender for Availing The Services Of Expert Engineer Of M/S Bhel Edn For Testing & Servicing Of Brushless Excitation System (Davr) Of Unit 10/11 Ph-Iv On Oem Basis.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Madhya Pradesh View Result →

42.

Power #9550914 AOC

Bids Are Invited For Custom Bid For Services - Deputation Of Service Engineer For Excitation System Make-M/S Abb Type- Unitrol6000 At Nspcl Durgapur Pp3

Contract Date: Ref. Documents Contract Value : ₹ 10.62 Lakh

Boards / Undertakings / PSU No of Bidders 1

West Bengal View Result →

43.

Educational and Research Institute #9534195 AOC

Contract Date: Feb 17, 2026 Contract Value : ₹ 5.63 Lakh

Local Bodies No of Bidders 6

West Bengal View Result →

44.

Housing Urban and Rular Development #9502542 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Madhya Pradesh View Result →

45.

Power #9489489 Technical Bid

Tender For Overhauling of control protection and Static Excitation system equipment’s of 200MW Unit no. 13th, BTPS Obra.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Uttar Pradesh View Result →

46.

Power #9489488 Technical Bid

Overhauling Work Of Generator, Bus Duct And Its Auxiliaries Of 200Mw Unit No. 13 - Following works shall be carried out on Generator during O/H of unit no.13 2 O/H & preventive maintenance of 15.75KV bus duct inside T. G. Hall. 3 H2 Gas purging & recharging. 4 O/H work of Gen. P.T. cubicle protection metering & auxiliary PT cubical of R, Y, & B phases. 5 O/H work of earthing transformer & neutral grounding reactors: 6 Decoupling, removal, remounting alignment and coupling of AC/DC seal oil pumps 7 Attending leakage of oil from AC/DC seal oil pumps including replacement of seal if required. 8 Maintenance and greasing of bearings in A.C. seal oil pump. 9 Reconditioning of all 15.75kv bus duct perplex containers. 10 Monitoring and maintaining the level of hydraulic seal oil tank round the clock manually by opening and closing the adjacent valve after float valve (when required) from charging of Gen seal till completion of overhauling work. 11 Normalizing seal oil system and draining oil from Gen. casing and hydraulic seal oil tank round the clock (when required) from charging of Gen seal till completion of overhauling work. 12 Repair of cooling pipe circuit of mechanical seal of AC/DC Seal oil pump. 13 Fabrication and installation of ladder from 0m to 8m cable trench. 14 Repairing of fencing around earthing transformer and NGR. 15 Repairing of fencing around 15.75 bus duct excitation cable portion at zero meter near NGR. 16 Isolation and reconnection of 15.75KV bus duct outside T.G. Hall from manhole near A-Axis wall. 17 Preventive maintenance of slip ring carbon brushes, brush holder, neutral grounding transformer and reactor in 5x200MW units: 18 Bus Separation from Gen. Phases, Neutral 19 Work On Seal Oil/ Stator Water Cooler 20 H2 Gas Filling and Monitoring in Gen Casing 21 Changing excitation polarity 22 Removal and Remounting of Old PTs with new PTs of Generator 23 Replacement of Drainpipes of Hydrogen Gas cooler of Generator. 24 Repairing of oil pipeline of seal oil pump & associated works. 25 Arrangement for drain of expansion tank & associated works. 26 Replacement of Rubber Expansion bellows of phase/ neutral side of generator terminal. 27 Attending leakage in clarified cooling line/DM water line of stator water system 28 Replacement of gaskets from flanges and valves of various gas pipelines. 29 Miscellaneous works such as Welding and Fabrication jobs during Overhauling of unit 13 to be carried out as per site requirement. 30 Repairing Of leakage of 450mm pipeline. 31 Cleaning & Double coat painting work in Bus duct from general to a-axis of the turbine hall (phase & neutral side) with structure.( approx260 M2 ) 32 Cleaning & Double coat painting work in Neutral grounding transformer with reactor and fencing.(approx. 75 M2 ) 33 Cleaning & Double coat painting work in P. T. cubical box and its duct. (approx. 84 M2 ) 34 Cleaning & painting work of Generator Stator. (Approx. area 170 Sq.M.) 35 Painting and Cleaning work of Seal oil system (including Damper Tank, & all associated pipelines), expansion tank (including all associated pipelines), Gas system (including all associated pipelines), Excitation duct (Approx. area 400 Sq.M.)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Uttar Pradesh View Result →

47.

Housing Urban and Rular Development #9488962 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Uttar Pradesh View Result →

48.

Housing Urban and Rular Development #9481110 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Uttar Pradesh View Result →

49.

Public Administrative Department #9463829 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttar Pradesh View Result →

50.

Agriculture #9447919 Technical Bid

tender for Supply Of Avr For Jyoti Make Alternator In Season 2024-25 , Supply Of Avr For Jyoti Make Alternator In Season 2024-25 , Dual Channel Avr Panel For 1500 Kw Jyoti Make Alternator: 420V, 3 Phase, 4 Wire, 150 Hz (Analog Avr) Output : 100, 15 A Dc Panel Features: Provision Of Isolation Transformer, Auto To Auto Changeover System, Dfr Protection Follow Up Unit, Over Excitation Protection/ Over Voltage/ Under Voltage, Pulse Regulator Card Along With Ac Voltage, Dc Voltage, Dc Amp, Nul Meter And Fault Analyser System.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 2

Uttar Pradesh View Result →

TenderDetail

Loading tenders