View Bid Results For Environmental Site Tenders

We found 529 Bid Results related to environmental site tenders. You can find Contractor details who won environmental site tenders along with contract details in Bid awards announcements section.

Filters
Stage
418
75
36
Tender Publishing Platform
28
501
State / UT
32
48
48
48
46
38
37
27
25
25
21
20
20
19
15
13
12
10
9
8
7
6
5
4
3
3
3
3
2
1
1
1
1
Contract Value
117
41
280
91
Publish Date
3
0
0
0
0
Sector
26
278
62
38
25
22
19
16
13
9
6
6
5
5
4
4
4
2
2
2
1
1
1
1
1
1
1
Ownership
5
279
164
39
38
9
Within keyword
Active filters:
Showing 1–11 of 529 tenders matching your filters
1.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
3.
Defence #11427184 Technical Bid
Tender for Sch A Part-I To Xi Note: This Schedule Is Pre-Priced By Mes And The Rate Indicated Under Col 5 Signifies This Fact Only , Total Amount Of Sch ‘A Part I (Building & Structures) , Total Amount Of Sch ‘A Part Ii (Site Clearance, Excavation & Earthwork ) , Total Amount Of Sch ‘A Part Iii (Cooling Appliances & Air-Conditioning) , Total Amount Of Sch ‘A Part Iv (Internal Water Supply) , Total Amount Of Sch ‘A Part V (Internal Electric Supply) , Total Amount Of Sch ‘A Part Vi (Road / Path) , Total Amount Of Sch A Part-Vii (Area Drainage ) , Total Amount Of Sch A Part-Viii (Sewage Disposal ) , Total Amount Of Sch A Part-Ix (External Water Supply) , Total Amount Of Sch A Part-X (External Electric Supply) , Total Amount Of Sch A Part-Xi (Hot Water Supply) , Schedule A Part-Xii (Misc B/R And E/M Works) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only. Bidders Shall Insert Their Rate In Column-7 For That Purpose. , Supply And Fix Engineering Body Desert Cooler Electric Driven Single Phase 230 Volts, Having Nominal Air Flow Capacity Of 4500 Cum Per Hour,Tank Capacity 105 Ltrs,With Auto Louver Movement,With Min Ait Throw 15 Mtr Complete All As Specified And As Directed By Engr-In- Charge. Make:Kenstar Turbocool Neo Hc 105 Or Techno Commercial Equivalent Make. , Supply, Installation, Commissioning Refrigerator, Electric Driven (Single Phase),Capacity 340 Ltrs , Double Door, Smart Inverter Compressor Of Latest Model, Eco Friendly , Digital Display, Toughened Glass Shelves Complete With All Accessories All As Specified And Directed By Engineer In Charge. , Supply Installation, Commissioning Of Metal Top Deep Freezer Double Door Single Phase Storage Type Deep Freezer 320 Ltrs Cap Of Latest Model Complete With All Accessories All As Specified And Directed. , Supply And Fix Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 2.0 Kva All As Specified And Directed , Supply And Fix Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 3.0 Kva Complete Suitable For Inverter Type Ac All As Specified And As Directed. , Design, Fabricate, Supply, Install, Testing And Commissioning Of Complete Electrical Chimney/Electrical Hood With Filters Comprising Of Following Items. A) Supply,Install,Testing And Commisssioning Of Kitchen Hood Made Ss 304 Matt Finish 1 Mm Thick Wall Mounted Type With Removable Grease Stop And Fixing Brackets,Oil Drain Channel Of Size 36 X 72 Of Required Length Including Drain Collector & Connecting With Exhaust Ducting Etc Complete All As Specified And As Directed-2 Rm B) Supply And Install Removable Grease Stop Filters Suitable Size Complete All As Specified And As Directed- 02 Nos C) Supply,Install,Testing And Commissioning Exhaust Blower Of Capacity 1 Hp ,240 Volts Single Phase 1440 Rpm Connecting With Exhaust Ducting And Suitable Copper Cable Connecting Complete All As Specified And As Directed:-01 Nos D) Supply And Installation Collar Damper Of Suitable Size For Connecting Between Duct And Exhaust Hood Made Out Of 20 Swg Complete All As Specified And As Directed.-02 Nos E) Supply And Fix Anti Vibration Dush With Ms Fabricated Stand Frame Of Suitable Size For Resting Blower Complete All As Specified And As Directed. , Supply And Install Exhaust Ducting Of Size 500 Mm X 500 Mm Made Of Gi Sheet 24 Swg Including Connecting With Ceiling Mounted Exhaust Hood Up To Terrace With Ms Angle Frame 25 X 25 X 3 Mm Thick,Fixing Of Brackets With Nut Bolts,Gaskets Supporting Thread Rod,Channels Etc,Including Painting The Steel Surfaces With Two Coats Of Synthitic Enamel Paint Over One Coat Of Red Oxide Primer Complete All As Specified And As Directed. , S&F 15 Mm Bore Pillar Taps, Cast Copper Alloy With Capstan Heads, Fancy Type, Chromium Plated Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts Screwed For Iron Pipe And Fixed Complete All As Specified And As Directed. , S&F Health Faucet (Abs Body) Suitable For 15 Mm Dia Pipe With 1 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified. , S&F Two Way Bib Tap 15Mm Dia, With Wall Flange And Aerator Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed. , S&F Wall Mixer For Mixing Hot And Cold Water And Bend For Connecting To Shower,15 Mm Bore Screwed For Iron Pipe And Fixed Complete All As Specified And As Directed. , S & F Flush Cock, Push Type 15Mm Dia, Cast Copper Alloy, Fancy Type, Chromium Plated, For Iron/Cpvc Pipe Or Unions Complete All As Specified And As Directed. , S&F 15 Mm Bore Pillar Tap With Swan Neck, Cast Copper Alloy With Capstan Heads, Fancy Type, Chromium Plated Screwed Down With Long Screwed Shanks And Fly Nuts Screwed For Iron/Cpvc Pipe And Fixed Complete All As Specified And As Directed. , S & F In Replacement Square Profile Led Lighting Fixture With Extruded Polycorbonate,Environmental Friendly,Energy Efficient Ready To Use Pack Led Tube Light Fitting 20 Watt With Led Light Source 6500K With Uniform Light Output,With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. , S & F Square Profile Led Lighting Fixture With Extruded Polycorbonate,Environmental Friendly,Energy Efficient Ready To Use Pack Led Tube Light Fitting 10 Watt With Led Light Source 6500K With Uniform Light Output,With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. , Supply And Fixing In Factory Made Powder Coated Sheet Metal Enclosure, Tpn Vertical Distribution Boards With Mccb Four Pole 25 Ka, 100 annual periodical maintenance With Fixed Thermal And Magnetic Settings As Incomer Ip43 Protection Double Door : Plain 4 Way With Suitable Rated Busbar,Neutral Link, And Mcb Sp/Tp As Outgoings Complete All As Specified And Directed. Note :Mccb And Mcbs Are Not Included In This Item And Paid Separetely. , S&F In Replacement, Mccb 4 Pole, 415 V, Adjustable Type, 100 Amps With Breaking Capacity 25 Ka And Making Connection With Suitabl Size Of Copper Lugs Etc Complete All As Specified And As Directed. , M&L For Construction Of New Reinforced Cement Concrete Septic Tank For 50 Users Designed To Carry Sewage And Sludge Water, Plain Cement Concrete 1:4:8 Below Foundation, Reinforced Cement Concrete Roof Slab Including Beams, Etc, Using Tmt Crs Bars Grade Fe-500D/Fe-550D, With Vent Shaft , Manhole Opennings With Cover Connection, Including Excavation Earthwork In Any Type Of Soil/ Ordinary Rock Complete All As Shown On Td Drg. Afb/Td/228/2018(S) Sheet 1R/1 Of Ce (Af) Bangalore Zone And As Specified By Engineer-In-Charge. , M&L For Construction Of Soakage Well, Including Excavation In Any Type Of Soil/Ordinary Rock, Foundation In Plain Cement Concrete 1:3:6 Walls Of Honeycomb Masonry With Top Ring Of M-25 Concrete Including Intersepting Chamber Screen Chamber Made Of Fly Ash Brick Masonry In C:M 1:4, Rcc/Dwc Complete Filled With Brick Bats Of Size Of Size 1.80M Dia And 3.0 M Effective Depth All As Shown On Drawing No Cepz/2019/Td/03 Sheet No 1/2 And 2/2 And As Specified By Engineer-In-Charge. , S&F Of Grease Trap Of Capacity 500Lts Having Length X Width X Height Of 1150 X 939 X 765 Mm, To Be Installed Underground Complete All As Specified And As Directed By Engineer-In-Charge. Make : Supreme, Cat No Rlugtp0500gb And Equivalent Series As Approved By Engineer-In-Charge. Note: (A) Excavation, Plain Cement Concrete And Brickwork For Installing Grease Trap To Be Paid Separately Under Respective Items. , Cutting Existing 150 Mm Dia Di Pipe For Inserting Tee Of Size 150X150x50 Mm Including Lead Joint And Excavation Etc Complete All As Specified And Directed , M&L For Construction Of Valve Pit/Chamber Of Internal Dimensions 900 Mm X 900 Mm X 900 Mm, Using Plain Cement Concrete 1:4:8, Type D-2, Using 40Mm Graded Stone Aggregates For Foundation, 23 Cm Thick, Brick Wall Built In Cement Mortar (1:4) ,15 Mm Thick Rendering All Around The Brick Work In Cement Mortar (1:6), 75 Mm Thick Plain Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregates In Coping Including Necessary Form Work, 3 Coats Of White Wash On Rendered Surfaces And On Coping, 5 Mm Thick Mild Steel Top Sheet Cover With Frame Made Out Of 40X40x6 Mm Angle Iron, Locking Arrangement, Including Painting Of Steel Surface With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer All As Specified And As Directed. , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 110 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24, 450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Maharashtra View Result →
4.
Housing Urban and Rular Development #11353959 Technical Bid
Tender for Cleaning And Sweeping Of Roads And Berms By Mechanical Road Sweeping Machine (Mrsm) Having Dry And Wet Sweeping Modes, Equipped With Following Specifications: (I) Minimum Effective Sweeping Width: 3.0 Metres (Ii) Minimum Dust/Debris Collection Hopper Capacity: 4 Cum (Iii) Equipped With Integrated Water Spraying System. (Iv) Equipped With Particulate Matter Dust Filtration System. (V)The Mrsm Shall Operate In Compliance With All Graps Restrictions. Note: 1. The Hire Charges Of Mrsm Includes The Deployment Of Machine With Operator, Helper, Fuel, Lubricants, Def, Consumables, Maintenance, T&P Such As Broom,Safety Gear For Staff, Sweeping, Collection, Loading, Transportation And Disposal Of Swept Dust/Debris To Nearest Mcd Dustbin Or Approved Dumping Site As Directed By The Engineer-In-Charge. 2. The Item Rate Includes The Submission Of Gps-Based Geo-Tagged Photographs/Video Evidence Before And After Cleaning On Daily Basis And Compliance With All Directions Of Engineer-In-Charge And Applicable Guidelines Of Ngt , Cpcb And Caqm. 3. Any Challan And Penalty If Imposed Due To Non-Performance / Negligence On The Part Of Agency Shall Be Borne By The Agency Himself. 4. Nothing Extra Shall Be Paid For Collection Of Staggered Garbage/Filling Making Stack, Loading, Unloading Etc. And On Account Of Dumping Charges, Etc., Challan & Penalties Imposed By Caqm, Dpcc, Mcd, Ngt Etc. After Handing Over The Site To The Contractor Upto The Completion Of Work And These Charges Shall Be Borne By The Contractor Itself. The Work Shall Be Executed Complete In All Respects To The Entire Satisfaction To Engineer-In-Charge. 5. The Mrsm Will Be Deployed At Edges Of The Roads And The Rate Included Cleaning For A Width Of 3.0 Metres. Nothing Shall Be Extra Payable For Cleaning More Than 3.0 Metres Width. Rates Shall Be Reduced Proportionately If The Cleaning Width Is Less Than 3.0 Metres. 6. The Mrsm Should Display On Dda Duty During Operation. , Cleaning And Sweeping Of Roads, Berms, Footpaths, cement concrete Path/Cycle Track, Bell Mouths, Kerb Channel, Etc. Manually Including Collection Of Garbage, Wild Grass/Bushes, Rubbish, Silt, Waste Material Dead/Pet Animals/ Malba Etc. By Engaging Environmental Assistants As Per Applicable Norms, Complete As Per Direction Of Engineer-In-Charge With All The Necessary Tools, Plants & EquipmentS Required At Site. , Disposal Of Moorum, Building Rubbish, Malba, Garbage, Wild Grass/Bushes, Rubbish, Silt, Waste Material Dead/Pet Animals, Etc. By Mechanical Means Including Loading, Transporting, Unloading To Nearest Approved Municipal Dumping Grounds For All Leads And All Lifts, Complete As Per The Direction Of Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
5.
Housing Urban and Rular Development #11310662 Technical Bid
Tender for Manual Sweeping/Cleaning/Dusting Of All Types Of Covered Areas, Doors, Windows, Toilets,Coolers And All Types Of Fittings And Fixtures Of All Floors To Be Scrubbed And Well Cleaned Including Providing Handwash, Naphthalene Balls Etc. For Toilets And Phenyl, Washing Powder Etc. By Deputing Environmental Assistants Alongwith Supervisors With All Necessary And Safety Equipments. Vacuum Cleaning May Also Be Required At Some Locations. The Work Also Includes Collection & Disposal Of Garbage/Waste To Designated Dumping Ground All Complete As Per Direction Of Engineer-In-Charge. Note: - 1. Dumping Charges (If Any) And Cost Of Required Consumables As Mentioned Above Are Included In The Item And Nothing Extra Shall Be Payable On This Account. 2. Gps Photographs Of The Site (Each Building) After Cleaning Is Done, To Be Submitted To The Engineer-In-Charge For Every Cleaning Day For Which Nothing Extra Shall Be Payable. 3. Penalty At Double The Agreement Rate Will Be Imposed On The Agency For Non Satisfactory Cleaning, In Addition To Action As Per Other Terms And Condition Of The Agreement. 4. Any Challan Issued From Mcd, Cpcb, Ngtetc. For Non Cleaning/Dumped Garbage Etc. Shall Be Borne By The Agency/Contractor At His Own Construction , Manual Sweeping/Cleaning Of All Type Of Roads, Footpaths, Parking Area , Open Space Etc. By Deputing Environmental Assistants Alongwith Supervisors With All Necessary And Safety Equipments Including Collection And Disposal Of Garbage/Waste To The Designated Dumping Ground All Complete As Per Direction Of Engineer-In-Charge. Note: - 1. Dumping Charges (If Any) And Cost Of Required Equipments As Mentioned Above Are Included In The Item And Nothing Extra Shall Be Payable On This Account. 2. Gps Photographs Of The Site After Cleaning Is Done, To Be Submitted To The Engineer-In-Charge For Every Cleaning Day For Which Nothing Extra Shall Be Payable. 3. Penalty At Double The Agreement Rate Will Be Imposed On The Agency For Non Satisfactory Cleaning In Addition To Action As Per Other Terms And Condition Of The Agreement. 4. Any Challan Issued From Mcd, Cpcb, Ngtetc. For Non Cleaning/Dumped Garbage Etc. Shall Be Borne By The Agency/Contractor At His Own Construction , Providing & Supplying Of 20 Ltr. Bisleri/Aquafina/Kinley Water Jar For Drinking Purpose In Office As Per Direction Of Engineer-In-Charge. , Cleaning Of Terrace/Loft Water Storage Tank (Inside Surface Area) At All Heights With Coconut Brushes, Duster Etc., Removal Of Silt,Rubbish From The Tank And Cleaning The Tank With Fresh Water Disinfecting With Bleaching Powder @ 0.5Gm Per Litre Capacity Of Tank Including Marking The Date Of Cleaning On The Side Of Tank Body With The Help Of Stencil And Paint And Disposing Of Malba All Complete As Per Direction Of Engineer-In-Charge. (The Old Date Already Written On Tank Should Be Removed With Paint Remover Or Black Paint And If Date Is Not Written With The Stencil Or Old Date Is Not Removed Deduction Will Be Made @ Rs. 0.10 Per Litre) (If During Cleaning Any Gi Fittings Or Ball Cock Is Damaged That Is To Be Repaired By Contractor At His Own Cost And Nothing Extra Will Be Paid On This Account) Note: - 1. The Cleaning Of Tanks Is To Be Done Once In Year. 2. Water Sample Will Be Tested As Per Directions Of Engineer-In-Charge Before And After This Operation For Which Nothing Extra Shall Be Payable. 3. If Water Sample After Disinfection Fails, Remedial Measures Will Be Taken At The Cost Of Agency As Per Direction Of Engineer-In-Charge , Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600 Mm Dia 10 Metre Openable Length ( Total Length 90 M), Having 50 Nos Rounds Per 6 Metre Length, Upto 3 M Height Of Wall With Existing Angle Iron ‘Y Shaped Placed 2.4M Or 3.00 M Apart And With 9 Horizontal R.B.T. Reinforced Barbed Wire, Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal, Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron, All Complete As Per Direction Of Engineer-In-Charge, With Reinforced Barbed Tape(R.B.T.) / Spring Core (2.5 Mm Thick) Wire Of High Tensile Strength Of 165 Kg/ Sq. Mm With Tape (0.52 Mm Thick) And Weight 43.478 Gm/ Metre (Cost Of M.S. Angle, Cement Concrete Blocks Shall Be Paid Separately) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Cleaning Of Running Sewer Line By Diesel Running Vehicle Mounting Hydraulic Operated High Pressure Jetting Sewer Cleaning Machine Fitted With 6000 Litres Water Jetting Tank Capacity Including Skilled Operator, Supervising Engineer Etc. For Cleaning Of Sewer Lines. Jetting Inside Sewer Line From One Manhole To Another By High Pressure Jetting System Of 2200 Psi For Sewer Line From 150 Mm Dia Upto 300 Mm , Total= 5,440,547.40 , After Multiplying Gst Factor Of 0.973= 5,293,652.62 , Add: Cost Index @ (-) 0.09% On Dsr Items Only (I.E. 4, 5 & 6)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 8
6.
Defence #11286957 Technical Bid
Tender for Sch A Part- I To Ix: Note: This Schedule Is Pre-Priced By Mes And The Rate Indicated As Under Col 5 Signifies This Fact Only , Total Amount Of Sch ‘A Part I (Building & Structures) , Total Amount Of Sch ‘A Part Ii (Site Clearance, Excavation & Earthwork ) , Total Amount Of Sch ‘A Part Iii (Cooling Appliances & Air-Conditioning) , Total Amount Of Sch ‘A Part Iv (Dg Set) , Total Amount Of Sch ‘A Part V (Internal Electric Supply) , Total Amount Of Sch ‘A Part Vi (Road / Path) , Total Amount Of Sch A Part-Vii (Area Drainage ) , Total Amount Of Sch A Part-Viii (External Water Supply) , Total Amount Of Sch A Part-Ix (External Electric Supply) , Schedule A Part-X (Misc B/R And E/M Works) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only. Bidders Shall Insert Their Rate In Column-7 For That Purpose. , S&F Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 2.0 Kva Complete All As Specified And As Directed By Engr-In- Charge. Makes :- Automatic Electrical (Ae)/ Vinitec/ Aplab/ V Guard , S&F Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 3.0 Kva Complete Suitable For Inverter Type Ac All As Specified And As Directed. Makes :- Automatic Electrical (Ae)/ Vinitec/ Aplab/ V Guard/ Volina , Supply, Install, Testing And Commissioning Of Silent Diesel Engine Generating Set, 100 Kva/80 Kw, 1500 Rpm, 3 Phase, 415 V, 50 Hz, Power Supply Alternator Along With Fuel Tank, Control Panel., Battery And Complete Set Installed In Sound Acoustic Enclosure And Standard Accessories And Fittings With Power Factor 0.8, Plain Cement Concrete Foundation Suitable For The Generator Set As Per Manufacturers Instructions Complete With Standard Accessories And Microprocessor Based Integrated Dg Set Controller With Coupled To Alternator Rated At 100Kva/80 Kw At 415 Volts, Set Mounted On Channel Iron Base Frame Complete With Sub-Base With Batteries, Avm Pads And Std Panel All As Per Guideline Of Latest Cpcb Iv+ Norms All As Specified And Directed And Comprising Of The Following: , Note For Item No. 11.30 (I) Engine: Engine With Direct Injection, Water Cooled, 3 Cylinders, In-Line,4 Strokes Rated At Developing 126.8 Bhp @ 1500 Rpm For Continuous Duty Of Suitable For 100 Kva Alternator With Provision Of 10% Over Load For One Hour In Every 12 Hour Running Confirming To Bs 5514/ Iso 3046 Standard Totally Enclosed As Per Oem Specification And Directed By Engr-In-Charge. The Engine Has The Following Specification:- A) Mechanical Fip B) Mechanical Governor C) Turbocharger, Exhaust Manifold, Stainless Steel Exhaust Flexible Connection D) Radiator Cooled, With After Cooled E) Plate Type Lube Oil Cooler F) Filters G) Lube Oil H) Dry Type Replaceable Paper Element Air Cleaner J) Flywheel Housing And Flywheel To Suit Single Bearing Alternator K) Starting Motor-Electric, Battery Charging Alternator L) First Fill Lube Oil And Coolant (Ii) Alternator: Brushless Alternator, Self -Excited, Self -Regulated, Floor Mounted With All And / Or Roller Bearings, Statically And Dynamically Balanced Screen Protected Acoustic Enclosure Confirming To Is 4722 / Is 13364, Ip-23 Protection With H Class Insulation Limited Temperature Rise Of Class H, Automatic Voltage Regulator From No Load To Full Load, Ammeter Capacity Of Delivery 100 Kva, 415 Volts, 3 Phase, 50 Hz And Lagging For Ac Supply And Will Be Suitable For Tropical Conditions All As Per Oem And Directed By Engr-In-Charge. (Iii) Instrument Panel : Engine Instrument Panel Consisting Of On/Off Starting Switch With Key Lubricating Oil Pressure Gauge, Water Temperature Gauge, Battery Charging Indicating Lamp, Hour Meter With Rpm Indicator, Safety Control Against High Temperature Of Water, Over Speed Stop With Double Driver Adopter As Per Oem Specification And Directed By Enge-In-Charge. (Iv) Other Fittings: (A) Battery Charger : Battery Charger Having Electric Circuit Consisting Of Rectifiers, Capacitors And Resistance Etc. The Battery Charger Should Be Able To Charge 12 Volts 88 Ah Battery At A Time (V) Dg Set Shall Be Supplied Along With Acoustic Original Enclosure Of The Manufactures Suitable For 100 Kva Dg Set And All Connecting Accessories As Per Latest Cpcb Iv+ Norms , (Vi) The Diesel Oil, Lub Oil Etc. For Smooth Functioning Of Dg Set During Ph-I & Ph-Il Complete Testing And Full Tank Filing Of Diesel Oil After Ph-I & Ph-Ii Testing, Topping Of Lub Oil Etc. Required For Commissioning And Testing Of Dg Set. (Vii) Amf Panel: - Supply Installing Commissioning & Testing In Microprocessor Based Amf Panel Board Factory Made, Out Door Type Ip-65, Cubical Type, Vermin Proof, Dust Proof, Water Proof Made Out Of 3.15 Mm Thick Crca Sheet And Angle Iron Frame Of Size 50X50x6 Mm Inside Depth Not Less Than 50 Cm And Size Suitable To Accommodate The Following Accessories With Insulated Tpn Copper Busbar Of Rating Not Less Than 1.5 Times The Rated Capacity Of The Incomer Mccb Suitable For 100Kva Dg Set. Hinged Door With Locking Arrangement Duly Painted With Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Both Internally And Externally And Connecting With Cable With Lugs Including Internal Wiring With Copper Cable Of Suitable Size Using Lugs Compressing The Following Accessories All As Directed. (Notes : The Rate Quoted Shall Include For Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ) And Copper Bus Bar 240 Amps Duly Colour Sleeved Mounted On Epoxy Insulators-01 Set. Note:(I) Amf Panel Suitable For 100 Kva Dg Set To Connect With Grid Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. The Amf Panel Has The Following Specification:- A) 160A, 4 Pole Contactor For Alternator With Thermal Over Load Relay B) 160A, 4 Pole Contactor For Mains C) Mcb For Short Circuit Protection D) Indication Led (Dg On, Load On Dg, Main On, Load On Main, Battery Charge On) E) Push Buttons (Engine Start/Stop, Generator Contactor Close/Trip, Main Contactor Close/Trip If Provided, Fault Accept/Reset) F) Voltmeter & Ammeter And Other Connecting Accessories And Safety Features For Successful Auto Operation Of 100 Kva Dg Set. (Viii) Excavation, Earthwork And Provn Of Plain Cement Concrete Plinth Of Suitable Sizes For Installation Of Dg Set & Connected Accessories Complete As Per Oem/ Site Requirements. , S&F Square Profile Led Lighting Fixture With Extruded Polycorbonate, Environmental Friendly, Energy Efficient Ready To Use Pack Led Tube Light Fitting 20 Watt With Led Light Source 6500K With Uniform Light Output, With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. Make:Havells Led Pride Essential Cat No Lhexawp7un1w020 Or Equivalent Makes Cg/Philips/Wipro/Luker. , S&F Factory Made Powder Coated Sheet Metal Enclosure, Tpn Vertical Distribution Boards With Mccb As Incomer Ip43 Protection Double Door: Plain 6 Way With Suitable Rated Busbar, Neutral Link, And Mcb Sp/Tp As Outgoings Complete All As Specified And Directed. Note :Mccb And Mcbs Are Not Included In This Item And Paid Separately. , S&F Mccb 4 Pole, 415 V, Adjustable Type Thermal Magnetic Release, 125 Amps With Breaking Capacity 25 Ka And Making Connection With Suitable Size Of Copper Lugs Etc Complete All As Specified And As Directed. , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 110 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24,450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 50 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24,450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed , M&L For Cutting Of Existing 40 Mm Dia Pipe For Inserting Tee Of Size 40X40x20 Mm Including Lead Joint And Excavation Etc Complete, All As Specified And As Directed , Supply, Install, Testing And Commissioning, Factory Made And Tested (Including Cpri Type Test Certified) Lt Panel Board Out Door Type, Floor Mounted, Compartmentalised And Ip-63 Suitable For 415 Volts 3 Phase 4 Wire, 50 Hz Ac Supply System, All As Specified And Directed, Having Bus Bar Chamber With Insulated Aluminium Bus Bars 250 Amps Rating Installed On Porcelain Insulators. The Panel Shall Be Dust And Vermin Proof, Made Of 3.15Mm Crca Ms Sheet And With Base Frame Of 50X50x6mm Angle Iron , Powder Coated, Front And Rear Opening Type With Aprons For Cable Entry With Double Door Shutter And Locking Arrangement With And Including Following Items. (Notes : The Rate Quoted Shall Include Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ).Note: Panel Board Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. Incoming :- (A) Mccb 4 P, 415 Volt 160 Amps, 32Ka, 50 Hz With Fixed Thermal And Magnetic Setting -01 No Outgoing :- (B) Mccb 4 P, 415 Volt 125 Amps, 25Ka, 50 Hz -01 Nos. (C) Mccb 4 P, 415 Volt 63 Amps, 10 Ka, 50 Hz -02 Nos. (D) R,Y,B Indicators (E) Multifunction Digital Square Type Intelligent Panel Meter To Measure Voltage, Current, Frequency, & Power Factor - 01 No
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 13
Maharashtra View Result →
7.
Housing Urban and Rular Development #11278211 Technical Bid
Tender for Cutting/Clearing Of Unwanted Growth Of Vegetation I.E. Grass, Wild Bushes & Shrubs Etc. By Mechanical Means Including Dumping Of This Unwanted Growth By Excavating Small Pits At Site And Filling The Top Of Pits With Excavated Soil Including Dressing Of Surface All Complete As Per The Directions Of Engineer-In-Charge. Note: - 1. Dumping Charges (If Any) And Cost Of Required Equipments As Mentioned Above Are Included In The Item And Nothing Extra Shall Be Payable On This Account. 2. Penalty At Double The Agreement Rate Will Be Imposed On The Agency For Non Satisfactory Cleaning In Addition To Action As Per Other Terms And Condition Of The Agreement. 3. Any Challan Issued From Mcd, Cpcb, Ngt Etc. For Non Cleaning/Dumped Garbage Etc. Shall Be Borne By The Agency/Contractor At His Own Construction 4. Gps Photographs Of The Site After Cleaning To Be Submitted To Engineer-In-Charge On Every Cleaning Day , Manual Sweeping/Cleaning Of All Type Of Parking Area , Open Space Etc. By Deputing Environmental Assistants Alongwith Supervisors With All Necessary And Safety Equipments Including Collection And Disposal Of Garbage/Waste To The Designated Dumping Ground All Complete As Per Direction Of Engineer-In-Charge. Note: - 1. Dumping Charges (If Any) And Cost Of Required Equipments As Mentioned Above Are Included In The Item And Nothing Extra Shall Be Payable On This Account. 2. Penalty At Double The Agreement Rate Will Be Imposed On The Agency For Non Satisfactory Cleaning In Addition To Action As Per Other Terms And Condition Of The Agreement. 3. Any Challan Issued From Mcd, Cpcb, Ngt Etc. For Non Cleaning/Dumped Garbage Etc. Shall Be Borne By The Agency/Contractor At His Own Construction 4. Gps Photographs Of The Site After Cleaning To Be Submitted To Engineer-In-Charge On Every Cleaning Day , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. Note 1. The Rate Is Inclusive Of Collection Of Scattered Garbage/Malba Etc. , Segregation Of Solid Waste As Per Condition Of Dumping Site/Processing Plant, Disposal Of Solid Waste At Dumping Site I/C Dumping Charge If Any. All Complete As Per Direction Of Engineer-In-Chrage. 2. Any Challan Issued From Mcd, Cpcb, Ngt Etc. For Non Cleaning/Dumped Garbage Etc. Shall Be Borne By The Agency/Contractor At His Own Construction , Providing & Sprinkling Of Water As Per Mitigation Measure To Control Dust Pollution As Per Cpcb Guideline On Kaccha Ground By Water Tanker (Capacity 5000 Ltr. ) With Conventional Sprinkler Including The Cost Of Driver, Water, Fuel And Other Consumables Complete As Per Direction Of Engineer-In-Charge. Agency Will Have To Submit Gps Photographs Of The Site During Water Sprinkling For Which Nothing Extra Shall Be Payable. Note: - 1. Penalty At Double The Agreement Rate Will Be Imposed On The Agency For Non-Satisfactory Compliance, In Addition To Action As Per Other Terms And Condition Of The Agreement. 2. The Sprinkler May Be Required To Be Deployed At Site On Short Notice (Within 24 Hours) Or As Per Direction Of Engineer-In-Charge. 3. Any Challan From Mcd, Cpcb Etc. Issued For Non-Sprinkling Of Water Shall Be Paid By The Agency/Contractor At His Own Construction , Total =7,932,438.84 , After Multiplying Gst Factor Of 0.973= 7,718,262.99 , After Multiplying Gst Factor Of 0.973= 7,718,262.99
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
9.
Defence #11255202 AOC
Bids Are Invited For Provision And Laying Of Athletic Track With 400 M 8 Eight Lane Pur Type Sandwich System Iaw World Athletics Wa Class Ii Standard As Per Boq Attached , Removal Of The Concrete Structure And Complete Leveling To Ground Level As Per The Latest Existing Standard With Consideration To Ground Level Of Adjacent Areas To Preclude Water Stagnation , Earth Surface Excavation Which Includes Leveling Of The Highland And Rocky Area Inside Around Stadium Boundary With Consideration To Ground Level Of Adjacent Areas As Per Boq Attached , Earth Work In Surface Excavation In Foundation Trenches Drains As Per Plan With Dressing Of Sides Ramming Of Bottoms Lift Up To One And Half M As Per Boq Attached , Excavating Trenches Of Required Width For Pipe Cables Sockets And Dressing Of Sides Ramming Of Bottoms With Depth Upto One And Half M As Per Boq Attached , Earth Work In Rough Excavation Banking Excavated Earth In Layers Not Exceeding 20 Cm In Depth Breaking Clods Watering Rolling Each Layer With One And Half Tone Roller As Per Boq Attached , Providing And Laying In Cement Concrete Of Specified Grade Including Cost Of Centring And Shuttering As Per Boq Attached , 148 1 Cement 4 Coarse Sand 8 Graded Stone Aggregate 40 Mm Nominal Size As Per Boq Attached , Centring And Shuttering Including Sturting Propping And Removal Of Firm Works For Foundations Footings And Bases Of Columns As Per Boq Attached , Brick Work With Fps Bricks Of Class Designation 75 In Foundation And Plinth In Cement Mortar 14 1 Cement 4 Coarse Sand As Per Boq Attached , 12Mm Cement Plaster Of Mix 1 4 Cement 4 Coaster Sand As Per Boq Attached , 12Mm Cement Plaster Of Mix Neat Cement Punning As Per Boq Attached , Consolidation Of Subgrade With Power Roller Of 8 To 12 Ton Capacity To Required Slope Including Making Good Undulations Etc With Earth Or Quarry Spoils Etc As Per Boq Attached , Supply And Stacking Of Earth By Mechanical Transport Including Loading Unloading And Stacking At Site As Per Boq Attached , Construction Of Granular Sub Base By Providing Close Graded Material Or As Per Latest Guideline For World Athletic Specification As Per Boq Attached , Providing Laying One And Half Spreading And Compacting Graded To Wet Mix Macadam Wmm Specification As Per Boq Attached , Providing And Applying Tack Coat Using Cold Bitumen Emulsion Including Spraying The Bitumen With Mechanically Operated Spray Unit As Per Boq Attached , Providing And Applying Tack Coat Using Cold Bitumen Emulsion Including Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen As Per Boq Attached , Providing And Laying Bituminous Macadam Using Crushed Stone Aggregates As Per Latest Guideline For World Athletic Specifications As Per Boq Attached , Providing And Laying Bituminous Concrete Using Crushed Stone Aggregates Of Specified Grading Or As Per Latest Guideline For World Athletic Specifications As Per Boq Attached , Supply And Installation Of Fully Computerized Automatic And Single Key Operation Popup Sprinkler System Specifically Designed For Synthetic Sports Hockey Surfaces As Per Boq Attached , Supplying And Installation Of 50 H P Pumping Set With Electronic Controller Etc Or Equivalent Making Connections Suitable For Tw D C B Open Well The Jobs As Per Boq Attached , Construction Of R C C Storage Tank Sump Well Of 75000 Liters Capacity Complete Including All Excavation And Earth Work Disposal Of Surplus Soil As Per Boq Attached , Providing And Laying Of Dwc Sn8 Is 16098 Ii Pipes 300 Mm Dia Pipe In Underground System For Provision In Electrical Line And Sprinkler Line Sleeve Purposes And Drainage Outlet , Supply And Laying Rcc Drain Cover Of Size 600 X 600 X 60 Mm With 8Mm Rods Per Rate 100Mm Cc Over The Walls Of Drain At Proper Level For Ease Flow Of Water As Per Boq Attached , Supply And Laying Rcc Drain Cover Of Size 600 X 300 X 60 Mm With 8Mm Rods Per Rate 100Mm Cc Over The Walls Of Drain At Proper Level For Ease Flow Of Water As Per Boq Attached , Providing And Laying Minimum 15Cm Thick Cement Concrete Slab Over The Existing Sub Base With A Nominal Mix Of 115 3 1 Cement One And Half Coarse Sand 3 Graded Stone As Per Boq Attached , Providing And Fixing At Or Near Ground Level Precast Cement Concrete Kerb Stones 300 300 100Mm Of M 25Grade Of Of Specified Size Including Setting In Position In Kerbs Edging Etc As Per Boq Attached , Cricket Pitch Preparation Earth Work In Excavation By Mechanical Means Hydraulic Excavator Manual Means Over Areas Exceeding 30 Cm In Depth As Per Boq Attached , Supplying And Filling Of Good Earth Bought From Outside Stacking At Site At Site Upto 5Km Complete As Per Boq Attached , Carriage Of Earth By Mechanical Transport Including Loading Unloading And Stacking From 5Km To Source Location As Per Boq Attached , Supplying And Filling In Plinth With Sand Under Floors Including Watering Ramming Consolidating And Dressing Complete As Per Boq Attached , Carriage Of Sand By Mechanical Transport Including Loading Unloading And Stacking Upto10 Km As Per Boq Attached , Supply And Planting Selection One 1 Grass Incl Ploughing Dressing Breaking Of Clods Removal Of Rubbish Dressing And Supplying Doob Grass At 10 Cm Apart As Per Boq Attached , Extra For Manual Compaction Of Earth By Rammers Hand Roller In 250 Mm Layers Including Watering Etc If Required Borrow Pit Measurement As Per Boq Attached , Surface Dressing Of The Ground Including Removing Vegetation And Inequalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish Lead Up To 50 M And Lift Up To 1Point 5 M As Per Boq Attached , Skill Labor For Drying Breaking Clay Soil And Making In Proper Shape And Size As Well As Laying And Necessary Compaction Cum Soil Helper Technician As Per Boq Attached , Synthetic Track Providing And Laying Of Synthetic Athletics Track Sw Pur Type System With Min 14 Mm Thickness Which Should Comply With Environmental Compatibility As Per Boq Attached , High Stress Areas With A Minimum Thickness Of 20 Mm Of Finished Track Surface As Per Boq Attached , High Stress Areas With A Minimum Thickness Of 25 Mm Of Finished Track Surface As Per Boq Attached , Construction Of Sand Filling In Jumping Pits As Per Boq Attached , Construction Of Steeplechase Pit Inside North D Portion As Per Iaaf Drawing And As Directed By Engineer In Charge As Per Boq Attached , Supply Of Sports Track Field Equipment For Conducting Various Event A Pole Vault Box With Cover As Per Boq Attached , Take Off Board System For Ljtj As Per Boq Attached , Hammer Cum Discuss Throwing Ring With Cage As Per Boq Attached , Short Put Throwing Rings With Toe Board As Per Boq Attached , Aluminum Kerbing 400M Std Track As Per Boq Attached , Water Jump Hurdle For Steeple Chase Run As Per Boq Attached , Conversion Circle Reducer For Dch As Per Boq Attached Total Quantity : 63284
Contract Date: Ref. Documents Contract Value : 7.02 Crore
Government Departments No of Bidders 6
10.
Educational and Research Institute #11249071 Price Bid
Tender For supply of Drugs Consumables And Surgical Items In Bmc Sagar , Ibuprofen(200 Mg),Tablet , Clomiphene Citrate(50 Mg Tab),Tablet , Cyproterone Acetate (2Mg) + Ethinyl Estradiol(0.035Mg),Tablet , Disulfiram(250 Mg),Tablet , Ethinylestradiol (A) + Levonorgestrel (B), [0.03 Mg (A) + 0.15 Mg (B)](With Ferrous Fumarate 75 Mg),Tablet , Ethinylestradiol(Tablet 0.01 Mg),Tablet , Ethinylestradiol(Tablet 0.05 Mg 10X10),Tablet , Levonorgestrel Emergency Contraceptive(0.75Mg),Tablet , Micronised Progesterone(100 Mg),Tablet , Mifepristone-200Mg (1 Tab)+Misoprostol-200Mcg (4 Tab)(Combipack),Tablet , Misoprostol(100 Mcg 4 Tables / Pack),Tablet , Norethisterone(5Mg),Tablet , Sodium Valproate + Valproate(333 Mg + 145 Mg),Tablet , Acetaminophen 1000 Mg/100 Ml(10 Mg/Ml),Injection , Dextrose 25%(500Ml Ffs Bottle),Injection , Glycine Irrigation Solution(1.5% 3000 Ml Iv),Fluid , Linezolid(200Mg / 100Ml ),Infusion , Sodium Chloride N/2 Injection Ip (0.45%)(500Ml Ffs Bottle),Injection [110399] , Dacarbazine Usp 200 Mg(10Mg/Ml),Injection [202207215] , Amoxycillin And Potassium Clavulanate I.P.(1 Gm + 0.2 Gm /10 Ml Vial),Injection [120021] , Betahistine(16 Mg),Tablet [110401] , Carboplatin(150Mg 15 Ml Vial),Injection [120056] , Cefixime 200 Mg + Clavulanic Acid 125 Mg(Tab),Tablet , Cefoperazone 500Mg + Sulbactam 500Mg(Vial),Injection [120067] , Ceftriaxone 1000Mg + Sulbactam 500Mg(Vial),Injection [120325] , Cefuroxime( 250 Mg),Tablet [120432] , Cefuroxime( 500 Mg),Tablet [120431] , Cepodoxamine 200 Mg + Clavulanic Acid 125Mg Tab(200Mg + 125 Mg),Tablet [121197] , Clindamycin(1% W/W 10 Gm),Gel [120329] , Epirubicin(50Mg Vial),Injection [120121] , Imatinib Cap/Tab(100 Mg),Tablet Or Capsule [120165] , Ketoconazole Ointment 2% 15Gm Tube(15 Gm),Ointment [4460030] , Omeprazole 40Mg(Vial),Injection [120231] , Ursodeoxy Cholic Acid 300 Mg Tab [700392] , Vitamin D3 Granules(60000 Iu Sachet),Powder [120715] , Amikacin(100Mg / 2Ml Vial),Injection [110068] , Betamethasone 0.1%, 5Ml(5Ml),Drop [201135] , Carboxymethylcellulose Eye Drop Ip 1% W/V 10Ml Vial(Sodium Cmc Also Accepted),Eye Drop [1100336] , Cefotaxime Sodium(1 Gm Vial),Injection [110094] , Cefuroxime(1.5 Gm),Injection [140076] , Ciprofloxacin 0.3%(5Ml Vial),Eye And Ear Drop [202210020] , Ciprofloxacin 0.3%(5Ml Vial),Eye Drop [110330] , Diclofenac Sodium 75Mg Intended To Use Iv - Aqueous Formulation(1Ml Amp/Vial),Injection [202109030] , Dicyclomine(10Mg/Ml (2 Ml Amp)),Injection [110279] , Etiophylline And Theophylline(220 Mg/2Ml),Injection [110375] , Gentamicin Inj(40 Mg/Ml 2 Ml Amp),Injection [110114] , Hydrocortisone Sodium Succinate(100 Mg/Vial),Injection [110039] , Levetiracetam(250 Mg),Tablet [120655] , Lignocaine 2 %(21.3 Mg / Ml (30 Ml Vial)),Injection [110006] , Meropenem 250 Mg / Vial(250Mg/Vial),Injection [700502] , Mometasone 0.10% Ointment/Cream(Mometasone Furoate Also Acceptable),Ointment [120533] , Moxifloxacin 0.5% W/V(5 Ml),Eye Drop [120534] , Ondensetron(4Mg/2Ml, 2Ml Amp),Injection [140090] , Paracetamol 150 Mg/Ml(15 Ml Bottle With Dropper),Drop [110028] , Pentaprazole Inj Vial(40 Mg),Injection [110275] , Promethazine Inj 25 Mg/Ml (10 Ml Vail)(10 Ml Vail),Injection Solution For [4350207] , Ranitidine(50Mg/2Ml , 2Ml Amp),Injection [110278] , Tobramycin(0.3% 5Ml),Eye Drop [120293] , Xylometazoline(0.05% 10Ml),Nasal Drop [202109079] , Linezolid 200Mg/100Ml(100Ml Ffs Bottle),Injection [120182] , Amikacin(100Mg / 2Ml Vial),Injection [110068] , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection [110012] , Dicyclomine(10Mg/Ml (2 Ml Amp)),Injection [110279] , Etiophylline And Theophylline(220 Mg/2Ml),Injection [110375] , Frusemide(10 Mg/Ml (2 Ml Amp)),Injection [110266] , Methyl Prednisolone Sodium Succinate Inj( Usp - 125Mg ),Vial [4350112] , Paracetamol Inj(150Mg/Ml 2Ml Amp(2Ml Amp)),Injection [110029] , Tramadol(100Mg/Ml (2 Ml Amp)),Injection [120609] , Calamine Lotion((Contains Per 1000 Ml:- Calamine 150 Gm,Zinc Oxide 50 Gm, Bentonite 30 Gm, Sodium Citrate 5Gm, Liquified Phenol 5Ml, Glycerin 50 Ml Purified Waterfreshly Boiled And Cooled To Produced 1000Ml) 50 Ml Bottle),Lotion [110258] , Drotaverine(80 Mg),Tablet [700527] , Latanoprost Eye Drop(0.005%, 2.5Ml),Drop [120896] , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension [110136] , Phenylephrine Hydrochloride,(10 Mg/Ml),Injection [202207316] , Quetiapine(50 Mg),Tablet [120582] , Rabeprazole 20 Mg + Domperidone 10Mg(10 X 10),Tablet [120999] , Sodium Valproate(200Mg),Tablet [110066] , Travoprost Ip(0.004% W/V,),Eye Drop [202207369] , Piracetam(200Mg),Injection [202207317] , Piroxicam(20 Mg/Ml),Injection [202207318] , Pancreatin 170 Mg+Oxbile Extract 50 Mg + Ginger Oleoresin 2 Mg+Activated Charcoal 50 Mg(Tab)(Tablet (With Additional Content Acceptable)),Tablet [120902] , Cyclopentolate 1% W/V(5 Ml),Eye Drop [120456] , Moxifloxacin 0.5% +Loteprednol 0.5% W/V(0.5%+0.5% W/V),Eye Drop [202207298] , Nepafenac(1Mg/Ml),Eye Drop [120685] , Prednisolone(1% Eye Drop),Drop [202209079] , Proparacaine(0.50% 5 Ml /Vial),Eye Drop [120575] , Sodium Hyaluronate (Intraocular)(1% /Ml),Injection [202111019] , Amitriptyline(10 Mg),Tablet [120408] , Chlorhexidine Gluconate Mouthwash 0.2% W/V Solution(50Ml Bottle ),Solution [110248] , Clobetasol Propionate 0.05%(15 Gm Tube),Cream [120443] , Domperidone(1 Mg/ Ml 10 Ml With Dropper),Drop [120472] , Drotaverine(40 Mg),Tablet [110343] , Ondansetron(2Mg/5Ml 30Ml Bottle),Syrup Or Solution [110292] , Paraffin Liquid(Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Mg),Syrup [4700084] , Sucralfate(1Gm/5Ml),Syrup Or Suspension [140073] , Sucralfate 500Mg + Oxetacaine 10 Mg/5Ml Syrup/Suspension, 200Ml Bottle(500Mg+10/5Ml),Bottle [202109073] , Tranexamic Acid + Mefenamic Acid (500Mg + 250Mg),Tablet [140051] , Vitamin D3(800Iu/Ml),Drop [202109140] , Caffeine Citrate Inj(20Mg/Ml 3 Ml Amp/Vial ),Injection [987622] , Magnesium Sulphate Injection(I.P.50 % W/V 10 Ml Amp),Injection [120186] , Menadione Usp (Vitamin K3)(10 Mg/Ml (1 Ml Amp)),Injection [120192] , Vitamin B12 500 Mcg /Ml 10 Ml Vial(10 Ml Vial),Injection [120614] , Reusable Flexible Hollow Co2 Fiber(Dedicated Specially For Stapedotomy, One Shot, Stapedotomy, Glomus Tumor, Tymponostomy),Consumable [202403001] , Alfacalcidiol Capsule(0.25 Mcg (Soft Gelatin Capsule Also Acceptable)),Capsule [120315] , Clotrimazole (200Mg) + Clindamycin (100Mg)(Vaginal ),Pessary [202312001] , Vitamin A Cap Usp Soft Gelatin Capsule( 2 Lakh Iu),Capsule [120307] , Vitamin-E Usp(400 Mg),Capsule [120721] , Aspirin Low Dose(75Mg Tab),Tablet [110022] , Deferasirox Dispersible(100Mg),Tablet [120101] , Deferasirox Dispersible(500Mg),Tablet [110200] , Hydroxychloroquine(200 Mg),Tablet [20200301] , Sitagliptin(50 Mg),Tablet [120272] , Desflurane(240 Ml),Bottle [202207220] , Amoxicillin Trihydrate Dispersible 125 Mg Tab(125 Mg),Tablet [700405] , Artesunate Powder For Injection 120 Mg(Vial Of 1 Powder Injection With Appropriate Diluents),Injection [202209015] , Pralidoxime Chloride Injection I.P.-1Gm(20 Ml),Injection [120258] , Amphotericin B Inj Ip 50 Mg(Liposomal Amphotericin B Also Acceptable),Injection , Anti D Immunoglobulin For Iv/Im Use (Monoclonal)(150Mcg (1Ml Vial)),Injection [110312] , Anti Thymocyte Globulin (250Mg/5Ml),Injection [202109153] , Human Anti D. Immunoglobulin (Monoclonal)(300Mcg/Vial),Injection [110313] , Human Chorionic Gonadotropin(Injection 5000 Iu Vial Of 2 Ml Injection),Injection [202209063] , Leuprolide Depot Inj(3.75Mg),Injection [700758] , Rabies Immunoglobulin Inj-300 Iu((2Ml Vial / Pfs)),Injection [110315] , Tetanus Immunoglobulin(Usp/Ip 250 Iu/Vial),Injection [110317] , Glargine 100 Iu /Ml, 3Ml Cartridge Inj. (Firm Has To Supply One Compatible Pen With Every 20 Cartridges As And When Required Without Any Extra Cost)(100 Iu /Ml),Cartridges , Human Insulin Regular/Soluble(100Iu/Ml (10Ml Vial)),Injection [120708] , Human Insulin Regular/Soluble(40Iu/Ml (10Ml Vial)),Injection [110300] , Insulin Biphasic 30/70((30% Soluble Insulin & 70% Isophane Insulin) 100 Iu/Ml. 10 Ml Vial),Infusion [202209090] , Premix Insulin 30:70(40 Iu/Ml),Injection [202209088] , Chlorpheniramine Maleate(4Mg),Tablet [110048] , Sulfamethoxazole +Trimethoprim Suspension (200 Mg + 40 Mg) / 5 Ml Suspension(50 Ml Bottle),Suspension [110132] , Sulfamethoxazole +Trimethoprim Tab(200 Mg + 40 Mg),Tablet [110131] , Point Of Care Test Kit (Poct) For Sickle Cell Diagnostics(As Per Attached Specification),Consumable [202403003] , Td (Tetanus Diphtheria) Vaccine (Adsorbed) (For Adults And Adolescents As Per I.P.),Vaccine [202209092] , Dextrose(10% Inj 500 Ml Ffs Btl),Injection [110386] , Dextrose(25% 100 Ml Ffs Bottle),Injection [110387] , Normal Saline(0.9% (500Ml Ffs Bottle)),Infusion [110395] , Sodium Chloride Normal Saline(100Ml Ffs Bottle),Infusion [110396] , Albendazole Ip(400Mg),Tablet [110141] , Iron Folic Acid Sugar Coated (Blue Tablet) Ferrous Sulphate Ip Equivalent To 60 Mg Elemental Iron & 500 Mcg Folic Acid Ip(60 Mg + 500 Mcg),Tablet [110407] , Iron Folic Acid Sugar Coated Tablet Dried Ferrous Sulphate Ip Eq. To 45Mg Ferrous Iron And 400Mcg Folic Acid Ip (Pink Coloured Tab) -Wifs Junior Ifa Tablets (Detail Specification As Per Tender)(45Mg + 400Mcg),Tablet [110409] , Metformin(500 Mg),Tablet [110302] , Paracetamol(500Mg),Tablet [110027] , Zinc Dispersible(20Mg),Tablet [110421] , Empagliflozin(10Mg Tab),Tablet [120940] , Empagliflozin(25Mg Tab),Tablet [120941] , Linagliptin 2.5Mg+Metformin 500Mg(Tab),Tablet [120992] , Alprazolam(0.5Mg),Tablet [110365] , Atorvastatin(Ip 10 Mg),Tablet [110238] , Azithromycin(250Mg),Tablet [110083] , Azithromycin(500Mg Tab),Tablet [110084] , Clomipramine 25 Mg(Tablet),Tablet [120446] , Clonazepam 0.25 Mg(Tablet),Tablet [120332] , Clonazepam(0.5Mg),Tablet [120872] , Clozapine(25 Mg),Tablet [120452] , Diazepam(5 Mg),Tablet [110367] , Divalproex Sodium(250 Mg),Tablet [120471] , Escitalopram(5 Mg),Tablet [120481] , Escitalopram + Clonazepam(10 Mg + 0.5 Mg),Tablet [120483] , Fluoxetine(10 Mg),Tablet Or Capsule [110361] , Glimepride 2 Mg + Metformin 1000 Mg(Tab),Tablet [120967] , Haloperidol(5Mg),Tablet [110356] , Levocetirizine 5Mg(Mouth Dissolving Tablet Also Acceptable),Tablet [110046] , Lorazepam(1 Mg),Tablet [120657] , Losartan(25 Mg),Tablet [140020] , Mirtazapine 15 Mg(Tablet),Tablet [120532] , Ondansetron(Tab 4 Mg),Tablet [4710264] , Pantoprazole 40 Mg, Domperidone 10 Mg(Tab),Tablet [120243] , Paroxetine Cr(12.5 Mg),Tablet [120564] , Pioglitazone(30 Mg),Tablet [120568] , Piracetam(800Mg),Tablet [140032] , Primaquine(15Mg),Tablet [110163] , Rosuvastatin(10 Mg),Tablet [120590] , Trihexyphenidyl(2Mg ),Tablet [110191] , 2Fdc (P) (Isoniazid 50 Mg & Rifampicin 75 Mg )(Dstb-Cp (P)),Tablet [202403006] , Alfacalcidiol Capsule(0.25 Mcg (Soft Gelatin Capsule Also Acceptable)),Capsule [120315] , Artesunate 200 Mg (3Tab) + Sulphadoxine 750 Mg + Pyrimethamine 37.5 Mg Ip (2 Tab)(Age Group 15 Or Above),Combi Blister Pack [110155] , Baclofen(40 Mg Tab),Tablet [120638] , Betahistine(8 Mg Tab),Tablet [110400] , Carbimazole(10 Mg),Tablet [120324] , Cefpodoxime(50 Mg (Dt Tablet Also Acceptable)),Tablet [110095] , Clofazimine Cap(100 Mg),Capsule [20200917] , Clotrimazole Vaginal Tablet I.P. - 100Mg(Without Applicator),Tablet [120842] , Cycloserine(Capsule 125 Mg),Capsule [202209021] , Diltiazem(Sr Tablet 90 Mg 10X10),Tablet [202209038] , Enalapril Maleate Tab(5Mg),Tablet [110220] , Ethionamide 125 Mg(Dispersible),Tablet [202403009] , Ethionamide 125 Mg Tab(125 Mg),Tablet [20210157] , Ethionamide 250 Mg Tab(250 Mg),Tablet [20210158] , Etizolam(0.5Mg),Tablet [202109101] , Ketorolac(10 Mg Tablet),Tablet [202207082] , Methylcobalamin(1500 Mcg),Tablet [120995] , Moxifloxacin 100Mg(Dispersible),Tablet [202403010] , Neomycin Sulphate+Bacitracin Zinc(5Mg+500 Iu/Gm Ointment (15Gm Tube)),Tube , Nicotinamide(Tablet 50 Mg),Tablet [202209084] , Nifedipine Capsule(5Mg Cap),Capsule [110227] , Nitroglycerine(Glyceryl Trinitrate)(Sublingual Tab 0.5 Mg),Tablet [4710073] , Oseltamivir 12 Mg/Ml Syrup(75Ml Bottle),Syrup [120237] , Penicillin V(Phenoxymethyl Penicillin Potassium)(250 Mg),Tablet [110126] , Pyrazinamide(150 Mg),Tablet [202403012] , Pyrazinamide(400 Mg),Tablet [202403013] , Pyridoxine(100 Mg),Tablet [120744] , Sodium Valporate + Valproic Acid Cr (300Mg),Tablet [140040] , Sodium Valproate(500 Mg),Tablet [120390] , Sodium Valproate Oral Solution(200 Mg / 5 Ml),Solution [110067] , Teneligliptin + Metformin(20Mg + 500Mg (Extended/Sustained Release Also Acceptable)),Tablet [140047] , Tiotropium 18Mcg(30Cap. X 6 Pack With 1 Dispensing Device),Rotacaps [700300] , Trypsin -Chymotrypsin(1 Lac Iu),Tablet [202109021] , Beclomethasone 0.025 % + Fusidic Acid 2.0 % Cream(10 Gm),Tube [202109012] , Febuxostat(80Mg),Tablet [202109103] , Fluconazole(200 Mg),Tablet [120352] , Aceclofenac 100Mg+Paracetamol 325Mg Tab( ),Tablet [120002] , Ammonium Chloride+Diphenhydramine+Sodium Citrate(138Mg+14.08Mg+57.03Mg Each 5Ml Cough Syrup (Additional Composition Of Menthol Also Acceptable)),Syrup , Chloroquine Phosphate Tab.(250Mg),Tablet [110159] , Chlorthalidone(25Mg),Tablet [202209037] , Deferasirox Dispersible(250Mg),Tablet [120102] , Diclofenac Sodium(50 Mg),Tablet [110023] , Etophylline + Theophylline((77 Mg+23 Mg)),Tablet [4710329] , Folic Acid Tab(400 Mcg),Tablet [700668] , Losartan Potassium, Hydrochlorthiazide(50 Mg + 12.5 Mg),Tablet [120185] , Metronidazole Benzoate Oral Suspension(100Mg Of Base/5 Ml (60Ml Bottle)),Suspension , Metronidazole Tab(400Mg),Tablet [110135] , Rosuvastatin(20 Mg),Tablet [202109128] , Sitagliptin + Metformin(50Mg + 500Mg),Tablet [140038] , Sulfamethoxazole +Trimethoprim Tab(200 Mg + 40 Mg),Tablet [110131] , Amiodarone(100Mg Tab),Tablet [110208] , Beclomethasone Inhalation I.P 200 Mcg Per Dose(200 Metered Dose Container),Inhaler , Brimonidine Eye Drop 0.2%(5Ml),Vial [120876] , Budesonide Nebulising Suspension Containing Budesonide(0.5 Mg/2 Ml, 2Ml Amp),Suspension [110372] , Darifenacin(7.5 Mg),Tablet [202207034] , Deferiprone(500 Mg),Capsule [120786] , Formoterol 6Mcg + Budesonide 200Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120778] , Formoterol 6Mcg + Budesonide 400Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120779] , Formoterol + Budesonide(6 Mcg + 100 Mcg/Puff (120 Mdi)),Inhaler [120135] , Formoterol Fumarate 12Mcg + Fluticasone Propionate( 500 Mcg ),Rotacaps [120777] , Insulin Biphasic Lispro 25:75 100 Iu/Ml (3 Ml Cartridge)(Firm Has To Supply Compatible Pen Along With Cartridges As And When Required Without Any Extra Cost),Cartridges [120713] , Ipratropium Bromide(250 Mcg/Ml Respules/Ampoule),Inhalation [20200601A] , Levosalbutamol(100Mcg),Capsule For Inhalation [202407001] , Levosalbutamol 100 Mcg + Ipratropium Bromide(40 Mcg),Rotacaps [120783] , Levosalbutamol (1.25Mg),Ipratropium (500Mcg) Respule(3Ml),Ampule [120749] , Liposomal Amphotericin B(50 Mg),Injection [20220114] , Metoprolol Inj 1 Mg/Ml(5Ml Vial),Injection [110225] , Propranolol Tab(40 Mg),Tablet [110229] , Salbutamol Inhalation Ip 100Mcg/Dose(200 Metered Dose Container),Inhaler [110380] , Salbutamol Nebuliser Solution Bp-Sabutamol Sulphate Eq. To Salbutamol 1Mg Per Ml(2.5 Ml Amp),Solution [110379] , Salmeterol 25 Mcg + Fluticasone 125 Mcg(120Mdi),Inhaler [780120] , Salmeterol 25 Mcg + Fluticasone 250 Mcg Inhaler (120Mdi)(250 Mcg),Inhaler [120730] , Salmeterol 50Mcg +Fluticasone 250 Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120780] , Salmeterol 50Mcg +Fluticasone 500 Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120781] , Tiotropium 9Mcg 180 Doses Inhaler(180 Or More Doses Acceptable),Inhaler [700301] , Tiotropium 9 Mcg + Formoterol 6 Mcg + Ciclesonide 200 Mcg(Pack Of 180 To 200Mdi),Inhaler [120909] , Tobramycin(300Mg/5 Ml),Respule [202207366] , Torsemide(10Mg),Tablet [110270] , Venlafaxine(75 Mg),Capsule [110363] , Warfarin(1 Mg ),Tablet [202209075] , Acamprosate(333 Mg),Tablet [120631] , Alendronate(70 Mg),Tablet [202109148] , Amiodarone Tab(200Mg),Tablet [4710096] , Amisulpride(200 Mg),Tablet [120407] , Atorvastatin(5 Mg),Tablet [120319] , Clobazam(10 Mg),Tablet [120331] , Donepezil(5 Mg),Tablet [120646] , Escitalopram(20 Mg),Tablet [120482] , Etoricoxib (90Mg),Tablet [140012] , Fluvoxamine(100 Mg),Tablet [120491] , Fluvoxamine(50 Mg),Tablet [120490] , Hydrochlorthiazide(12.5 Mg),Tablet [120356] , Lamotrigine Dt(50 Mg),Tablet [120514] , Lamotrigine Dt Tab(100 Mg),Tablet [120513] , Memantine(10 Mg),Tablet [120659] , Mycophenolate (360Mg),Tablet [140026] , Sertraline(100 Mg),Tablet [120594] , Sertraline(50 Mg),Tablet [110362] , Spironolactone Tab 100Mg(10X10),Tablet [4710136] , Tenofovir Desoproxil Fumarate(300 Mg (Tdf) Tablet/Capsule),Tablet Or Capsule , Hpmc (Hydroxy Proply Methyl Cellulose) 2% W/V(2Ml Glass Prefilled Syringe),Syrings [120690] , Hydroxy Propyl Methyl Cellulose Injection 2%(3Ml Prefilled Syringe),Syrings [120855] , Bortezomib(3.5Mg Vial),Injection [120048] , Activated Charcoal(400Mg),Tablet [202202008] , Beclomethasone Dipropionate, Neomycin Sulphate, Miconazole Nitrate(0.025 % + 0.5 % + 2 % (5 Gm Tube)),Ointment [120040] , Betamethasone Valerate Oint 0.1%(15 Gm Tube),Ointment [4460003] , Bisacodyl(5Mg Tab),Tablet [110293] , Brimonidine Eye Drop, 0.1%(5Ml),Eye Drop [120877] , Calcitriol 0.25 Mcg + Calcium 500Mg+ Mecobalamin 1500Mcg+ Omega-3 Acid Ethyl Esters-60 Bp+ Folic Acid-400Mcg + Elemental Boron 1.5Mg(Capsule/Soft Gelatin Capsule),Capsule [20200511] , Calcium Carbonate(500 Mg),Tablet [110403] , Carboxymethyl Cellulose 0.5% Eye Drop(5 Ml),Eye Drop [122020] , Cefotaxime + Sulbactam 1000 Mg + 500 Mg Vial(1000 Mg + 500 Mg),Injection [120429] , Chewable Antacid Containing Magnesium Hydroxide Minimum 250Mg To 500Mg+Aluminimum Hydroxide Minimum 250Mg To 500Mg +Simethecon/Dimethicon Minimum 25Mg To 50Mg Tab(Additional Component Will Also Be Accept),Tablet [1100273] , Chloramphenicol 1%(5 Ml Vial),Eye Drop [4240001] , Dinoprostone Gel(0.5 Mg),Gel [120885] , Disodium Hydrogen Citrate 1.25Gm/5Ml 100 Ml(100 Ml),Syrup [120882] , Hydrocortisone Sodium Succinate Inj. 200Mg Vial( ),Injection [4350141] , Levothyroxine(100 Mcg),Tablet [4710079] , Levothyroxine(50 Mcg),Tablet [4710074] , Multivitamin Sugar Coated Tab Nfi Formula Multivitamin Sugar(Item With Additional Vitamin Will Also Be Considered And Film Coated Also Acceptable),Tablet [110412] , Nicotine (Nrt)(2 Mg Chewing Gum ),Gum [120542] , Nicotine (Nrt)(4 Mg Chewing Gum ),Gum [120543] , Pregabalin + Methylcobalamin(75 Mg + 750 Mcg),Tablet Or Capsule [120573] , Sodium Chloride N/2 Injection(0.45%(100Ml Ffs Bottle)),Injection [202202013] , Vitamin B1 10Mg, B2 10Mg, B6 3Mg, B12 15Mcg, Niacinamide 75Mg, Calcium Panthenol 50Mg(Folic Acid 1.5Mg, Vitamin C 150Mg, Biotin 100Mcg Or More),Tablet [120692] , Sodium Dichloroisocynaurate 35 Mg Tablet(Turnover Criteria Amended As Average Annual Turnover 2Cr. Only Gmp Certified Companies Also Eligible For This Consumable Item),Tablet [121002A] , Atropine Sulphate 1%(5 Ml Vial),Eye Drop [110325] , Bupivacaine Hydrochloride(0.5% (20 Ml Vial)),Injection [110010] , Dexamethasone Eye Drop(0.1%, 5Ml),Eye Drop [120883] , Flurbinprofen Eye Drop 0.03%(5 Ml Vial),Eye Drop [120888] , Glycopyrrolate Inj. - 0.2 Mg/Ml(1 Ml Amp),Injection [110013] , Heparin(1000Iu/Ml 5Ml Vial),Injection [110194] , Ketorolac Eye Drop 0.5%,(5Ml),Drop [202209091] , Lorazepam(2 Mg / Ml 2 Ml Vial),Injection [120658] , Midazolam(1Mg/Ml (10Ml Vial)),Injection [110014A] , Noradrenaline Bitartrate 2 Mg Base / 2 Ml Amp Injection(2 Ml Amp),Injection [121109] , Succinyl Choline(50Mg/Ml (10 Ml Vial)),Injection [110033] , Timolol Maleate I.P. 0.5 %W/V(5 Ml Vial),Eye Drop [987694] , Tropicamide + Phenylephrine Eye Drop 0.8% And 5%(5 Ml Vial),Eye Drop [120904] , Mannitol(20% 100 Ml Ffs Bottle),Injection [110269] , Darbepoetin(25Mcg),Injection [140078] , Darbepoetin(40Mcg),Injection [140079] , Ketorolac Tromethamine Ip(20 Mg (30 Gram) Gel),Tube [202207083] , Panitumumab(100 Mg Vial),Injection [202207131] , Rituximab(500Mg ),Injection [4350297] , Sachet Ompeprazole Ip Excipents Sodium Bicarbonate (Eq To Approx, 460 Mg, Sodium)((Sucralose, Sucrose, Xanthan Gum, Xylitol And Mint Flavour) 20 Mg Sachet),Sachet [202207339] , Ursodeoxy Cholic Acid(150 Mg Tab),Tablet [120733] , Doxketoprofen Trometamol(Equivalent To Dexketoprofen 25Mg + Paracitamol 325 Mg),Tablet , Framycetin Sulphate 1% Cream(30 Gm Tube),Cream [110251] , Ferric Carboxymaltose 50Mg/Ml(10Ml Vial),Injection [120704] , Amoxicillin(125 Mg/5Ml (30 Ml Bottle)),Suspension [110074] , Ampicillin Trihydrate Capsules(500Mg 10X10),Capsule [110081] , Cefopodoxime 50 Mg/5 Ml Suspension(30Ml),Bottle [202109017] , Chloramphenicol Ear Drop 5%(5 Ml Vial),Drop [4580001] , Cyproheptadine Hydrochloride Ip(2Mg Each 5Ml),Syrup [140072] , Deflazacort(6Mg),Tablet [202109094] , Diclofenac Sodium 25 Mg/Ml(3Ml Amp),Injection [110024] , Itraconazole(200Mg),Capsule [202109108] , Rabeprazole + Levosulpiride(20Mg +75Mg),Tablet Or Capsule [202109126] , Fluoro Metholone Eye Drop 0.1%(5Ml),Eye Drop [122022] , Fat Emulsion 20%(250 Ml),Injection [202401001] , Fluconazole Iv(2Mg/Ml (100Ml Bottle)),Infusion [120133] , Hydroxyethyl (6% Saline Solution For Infusion)(Starch 6%Ip 500 Ml Bottel),Infusion , Ivf Glutamine Dipeptide(100Ml),Injection [120796] , Busulphan(60Mg/10Ml),Injection [202203019] , Vinorelbine(10 Mg),Injection [202109136] , Allopurinol(100Mg),Tablet [110034] , Glycerine + Sodium Chloride Enema(15% + 15% 20-30 Ml /Pack),Enema [120498] , Bromhexine Hcl 4 Mg+ Guaiphensin 50 Mg + Terbutaline Sulphate 1.25 Mg/5Ml Syp(100 Ml Bottle),Syrup [120049] , Disodium Hydrogen Citrate 1.25Gm/5Ml 100 Ml(100 Ml),Syrup [120882] , Iron Folic Acid Syrup Ip, Each 1Ml Of Syrup Shall Contain Ferrous Sulphate Equivalent To Elemental Ferrous Iron (Derived From Ferrous Sulphate Ip): 20Mg And Folic Acid Ip 0.1Mg (50Ml Bottle)(As Per Attached Specification Annexure),Syrup [202401002] , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension [110136] , Salbutamol(2Mg / 5Ml (100Ml Bottle)),Syrup [121035] , Potassium Chloride 150 Mg/Ml Injection, 10 Ml Ampule(10 Ml Ampule),Injection , Water For Injection 5 Ml Amp [110435] , Erythropoietin(4000 Iu Inj Vial/Pfs),Injection [120127] , Tenecteplase 20Mg(20Mg),Injection [120770] , Amisulpride(100 Mg),Tablet [120405] , Aripiprazole(10 Mg),Tablet [120413] , Divalproex Sodium(500 Mg Tab),Tablet [120469] , Duloxetine(20 Mg),Tablet [120475] , Entecavir(0.5 Mg Tablet/Capsule),Tablet Or Capsule [20201195] , Mirtazapine(7.5 Mg),Tablet [120369] , Doxorubicin (Lyophilized)(10 Mg / Vial),Injection [120116] , Gemcitabine(200Mg/Vial),Injection [120141] , Fluocinolone Acetonide Ip( 0.1% W/W 30 Gm Cream),Tube [122021] , Gefitinib(250Mg),Tablet [120139] , Tamoxifen(20Mg),Tablet [110187] , 5-Fluro Uracil(500Mg),Injection [202109081] , Bendamustine(100Mg Vial),Injection [120822] , Cisplatin(50 Mg),Injection [202109024] , Cyclophosphamide Inj 500Mg/Vial(Each),Injection [4350189] , Cytarabine(100Mg),Vial [120726] , Hydroxy Urea(500Mg),Capsule [120159] , Methotraxate(50 Mg),Injection [202109115] , Pemetrexed(500Mg),Injection [120248] , Temozolomide(250Mg),Capsule [120287] , Zoledronic Acid(4Mg Vial),Injection [110189] , Human Albumin Solution I.P. 20%W/V(100 Ml Ffs Bottle/Glass Bottle),Bottle [110202] , Carboxymethyl Cellulose (1% Eye Drop, 5Ml),Eye Drop [120879] , Ciprofloxacin + Dexamethosone (0.3%+0.1%)(5Ml),Eye Drop [120079] , Fluticasone 50Mcg/Spray(70-120 Meter Dose Nasal),Spray [202109034] , Hyoscine Butylbromide(10Mg),Tablet [120162] , Metformin(1000Mg),Sr Tablet [140022] , Ofloxacin + Dexamethosone(0.3%+ 0.1% (10 Ml)),Eye Drop [120225] , Olopotadine(0.1% W/V (5 Ml Vial)),Eye Drop [110337] , Vildagliptin Tab(50 Mg),Tablet [4710516] , Water For Injection Inj 10 Ml Amp [4350073] , Ferrous Ascorbate 100Mg (Elemental Iron)+Folic Acid 1.5Mg(Tablet),Tablet [120846] , Cisatracurium(2Mg/Ml),Injection [202207201] , Cyanocobalamin (Vit B-12)(1,000 Mcg/Ml),Injection [202207210] , Polypropylene 1-0 Rb 1/2 Circle 30 Mm, L 70 Cm(12 Foils /Pkt),Needle [202307002] , Isosorbide Dinitrate Tab Ip(5Mg),Tablet [110236] , Prazosin Tab(5 Mg),Tablet [4710081] , Primaquin(2.5Mg),Tablet [110161] , Pyridoxine(25 Mg),Tablet [202312022] , Pyridoxine(40 Mg),Tablet [202209085] , Pyridoxine(50 Mg),Tablet [202312023] , Thyroxine Sodium 25 Mcg(100 Per Bottle),Tablet [120607] , Thyroxine Sodium Tab 100 Mcg (100 Tab Bottle)(100 Tab),Tablet [110310] , Thyroxine Sodium Tab(50Mcg(100 Tab Bottle)),Tablet [110309] , Bicalutamide(50Mg ),Tablet [120831] , Erlotinib(150 Mg),Tablet [120827] , Ascorbic Acid (Vitamin C)(100 Mg),Tablet [202012174] , Clotrimazole(1% 100 Gm),Powder [120448] , Diclofenac Sodium(50 Mg),Tablet [110023] , Folic Acid Tab(400 Mcg),Tablet [700668] , Salbutamol Sulphate(4Mg),Tablet [110377] , Vitamin A Syrup(100000 Iu/Ml With Market Spoon For 1Ml And 2 Ml (100 Ml Bottle)),Syrup Or Solution [110417] , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet [20200514] , Amantadine(100Mg),Tablet [202109150] , Bevacizumab100 Mg(4 Ml Vial),Injection [120691] , Clonazepam(2Mg),Tablet [120873] , Etanercept 25Mg/Vial(Pack Of 2 Vials),Injection [120852] , Filgrastim 300 Mcg(Prefilled Syrings),Vial [120132] , Haloperidol(10Mg),Tablet [4340017] , Intravenous Immunoglobulin(Ivig 10% (10Gm /100Ml)),Vial [120853] , Iv Human Immunoglobin 5% Iv Ig(5Gm/100Ml Each),Infusion [120802] , Ranibizumab 10Mg/Ml Injection(Intenvitral),Injection [120787] , Rituximab(100Mg),Injection [120268] , Thyroxine Sodium(75 Mcg),Tablet [120608] , Trastuzumab 440 Mg Injection(Vial),Injection [120837] , Primaquin(7.5Mg),Tablet [110162] , Sulfasalazine(1 Gm),Tablet [202207358] , Bortezomib(2Mg),Injection [120047] , Exemestane(25 Mg),Tablet [202212010] , Irinotecan Hydrochloride(100 Mg),Injection [120173] , Lenalidomide(25Mg),Tablet Or Capsule [120826] , Oxaliplatin(50Mg Inj 25 Ml Vial),Injection [120239] , Paclitaxel Nanoparticle/Protein Bound Particles Inj.(100Mg Vial),Vial [120242] , Pemetrexed(100 Mg Vial),Injection [120247] , Sorafenib(200Mg),Tablet [120275] , Sunitinib(50 Mg),Tablet Or Capsule [202212008] , Canagliflozin(100 Mg),Tablet [20200914] , Risperidone(50 Mg Injection Vial Of 2 Ml),Injection [202209082] , Acetylsalicylic Acid(150 Mg),Tablet [202209004] , Adrenaline(1 Mg / Ml (1 Ml Amp)),Injection [110043] , Ascorbic Acid (Vitamin C) Tab I.P.(500Mg),Tablet [120030] , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection [110012] , Calcium Citrate - 1000Mg (Elemental Ca Equivalent To 250 Mg And Vitamin D3 400 Iu)(-),Tablet [120695] , Combo Ear Drop(Chloramphenicol 5% W/V + Clotrimazole 1% + Lignocaine Hydrochloride 2%),Ear Drop [2021031] , Diazepam(5 Mg/Ml (2 Ml Amp)),Injection [110366] , Diclofenac 100Mg(Sr Tablet 10X10),Tablet [140010] , Doxycycline Dry Syrup(50 Mg/5 Ml),Suspension [202209025] , Doxylamine Succinate + Pyridoxine(10Mg+10Mg),Tablet [120117] , Elemental Iron 40 Mg, Ammonium Citrate 200 Mg, Cyanocobalamin 7.5 Mg, Folic Acid 0.5 Mg, Zinc Sulphate 7 Mg(Per 5Ml)(Iron Syrup 200 Ml),Bottle [987889] , Ethambutol(400 Mg),Tablet [202103054] , Ethambutol(800 Mg),Tablet [202103058] , Gabapantin300 Mg + Methylcobalamin 500 Mcg(300 Mg + 500 Mcg),Tablet [120989] , Gel Containing Choline Salicylate + Benzalkonium Chloride 9% + 0.02%(10 Gm),Gel , Isoniazid(100Mg(As Per Attached Specification)),Tablet [120705] , Isoniazid(300 Mg(As Per Attached Specification)),Tablet [120706] , Magnesium Suplhate(50 % W/V (2Ml Amp)),Injection [110345] , Methyl Prednisolone(8Mg),Tablet [120204] , Mupirocin(2% W/W (5 Gm Tube)),Ointment Or Cream Or Gel [110250] , Norfloxacin(100 Mg Dispersible Tablet),Tablet [202209027] , Ofloxacin Tab - 400 Mg(Ofloxacin Tab - 400 Mg),Tablet [700381] , Phenytoin Sodium(50 Mg/Ml (2Ml Amp)),Injection [110062] , Povidine-Iodine(Gargle 2% W/V 100 Ml Bottel),Bottle [202209047] , Rabeprazole(20 Mg),Tablet [120276] , Sodium Valproate Oral Solution(200 Mg / 5 Ml),Solution [202111020] , Water For Injection Ip(2 Ml Amp),Injection [110434] , Metoclopramide(10Mg),Tablet [110288] , Dexamethasone(4 Mg),Tablet [120104] , Diclofenac + Seratopeptidase(50Mg + 10Mg),Tablet [121033] , Doxylamine Succinate(10 Mg),Tablet [110286] , Fluconazole(50 Mg),Tablet [120350] , Glibenclamide(5 Mg),Tablet [120145] , Hydrochlorthiazide(12.5 Mg),Tablet [120356] , Isosorbide-5-Mononitrate(Tab.20 Mg),Tablet [110235] , Levetiracetam 500 Mg [120515] , Losartan(50 Mg),Tablet [4710032] , Metformine 500Mg + Glibenclamide 5Mg(Tab),Tablet [120707] , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension [110136] , Misoprostol(200Mcg),Tablet [110349] , Omeprazole Capsule(40 Mg),Capsule [120376] , Oseltamivir Cap(75Mg),Capsule [120235] , Paracetamol 500Mg + Chlorpheniramine 2Mg+ Phenylephrine 10Mg(500Mg+2Mg+10Mg),Tablet [202109068] , Telmisatran(20 Mg),Tablet [4710307] , Alfuzosin(10Mg),Tablet Capsule [202109149] , Citicoline(500Mg),Tablet [140007] , Fexofenadine + Montelukast (120Mg/10 Mg),Tablet [202109033] , Rifaximin(400Mg),Tablet [202109127] , Clopidogrel + Aspirin(75 Mg + 150 Mg),Capsule [120088] , Cycloserine(250Mg),Capsule [202312009] , Ethambutol(200 Mg),Tablet [202103053] , Ivabradine(5Mg),Tablet [120768] , Rifampicin(150 Mg),Capsule [202312003] , Rifampicin Cap(300 Mg),Capsule [700485] , Rifampicin Cap(450 Mg),Capsule [700486] , Rifapentine And Isoniazid Tablet(300Mg /300Mg),Tablet [202403014] , Artesunate(60 Mg /Vial),Injection [110148] , Alfacalcidol 0.25Mcg, Calcium 200Mg(0.25Mcg+200Mg),Capsule [140057] , Pyrazinamide(1000Mg),Tablet [202403011] , Azithromycin(200Mg/5Ml (15 Ml Bottle)),Syrup [110085] , Medroxy Progesterone Acetate(10 Mg),Tablet [120519] , Dydrogesterone(10 Mg),Tablet [110305] , Amikacin(500Mg/2Ml (2Ml Vial)),Injection [110070] , Ceftrioxone Usp(1Gm/Vial),Injection [110101] , Piperacillin + Tazobactam 1000 Mg + 125 Mg Vial 10 Ml Vial( ),Injection [120570] , Liquid Medical Oxygen(Not Less Than 99 % V/V Of Oxygen - Mars),Other Item [202301005] , Monthly Rental And Maintenance Charges Of Lmo Setup Per Site(Mars),Other Item , Transportation And Other Charges Per Cubic Meter Of Medical Oxygen(Mars),Consumable [202301011] , Aminophylline(25 Mg/Ml 10 Ml Vial),Injection [110370] , Betamethasone Sodium Phosphate(Ml Contain Betamethasone Sodium Phosphate Equal To 4Mg Of Betamethasone (1Ml Amp)),Injection [110035] , Calcium Gluconate 10%(10Ml Vial/Amp),Injection [110404] , Carboxymethylcellulose Sodium Eye Drop 0.5%(10Ml),Eye Drop [4240036] , Drotaverine(40Mg/2Ml (2Ml Amp)),Injection [110342] , Methyl Ergometrine Inj Meleate(0.2 Mg /Ml (1Ml Amp)),Injection [110347] , Moxifloxacin 0.5% W/V(5 Ml),Eye Drop [120534] , Moxifloxacine + Dexamethasone 0.5% + 0.1% W/V 5 Ml(-),Eye Drop [120536] , Ofloxacin 0.3% W/V Of Ofloxacin(5 Ml Vial),Eye Drop [110332] , Ondansetron(2 Mg/ Ml (2 Ml Amp)),Injection [110291] , Ondensetron(4Mg/2Ml, 2Ml Amp),Injection [140090] , Pheniramine Maleate(22.75 Mg/Ml (2 Ml Amp)),Injection [120250] , Promethazine 25 Mg/Ml(2 Ml Amp),Injection [120627] , Vitamin B12 Inj 500 Mcg/Ml(30 Ml Amp/Vial),Injection [120915] , Xylometazoline Nasal(0.1%W/V (10 Ml Vial)),Drop [120312] , Acyclovir(800Mg),Tablet [110168] , Betamethasone Dipropionate(0.05% (15Gm) Tube),Ointment Or Cream [110254] , Escitalopram 10 Mg Tab(10 Mg),Tablet [4710216] , Fusidic Acid Cream/Sodium Fusidic Ointment 2%(5Gm Tube),Tube [110252] , Gliclazide(80 Mg),Tablet [110297] , Levocarnitine-(500Mg),Tablet [202207283] , Metoprolol( 25Mg, Sustained Release ),Tablet Or Capsule [140024] , Moxonidine(0.2 Mg),Tablet [202207300] , Moxonidine(0.3 Mg),Tablet [202207301] , Phenytoin Sodium(100Mg),Tablet [110064] , Tacrolimus(0.1%W/W),Ointment [202207359] , Ibuprofen 100Mg + Paracetamol 125Mg Per 5 Ml Syrup(60 Ml Bottle),Syrup [987656] , Omeprazole(20Mg),Capsule [120230] , Cetuximab(500 Mg),Injection [202207016] , Linezolid Tab(600 Mg),Tablet [120751] , Abacavir(Tablet 300 Mg),Tablet [202209014] , Acyclovir 5%(5Gm ),Ointment Or Cream [110169] , Acyclovir Tab. Ip - 200Mg(Dt Tablets Also Acceptable),Tablet [110167] , Benzoyl Peroxide 2.5% 20 Gm(Ointment/Gel),Tube [120321] , Benzyl Benzoate Lotion 25%(100Ml Bottle),Bottle [700901] , Clindamycin(150 Mg),Capsule [202209019] , Clindamycin(300Mg ),Tablet Or Capsule [120776] , Clobetasol 0.05% + Gentamicin 0.1% Cream 10 Gm(10 Gm Tube),Cream [120082] , Clotrimazole (Vaginal Tab) 500 Mg(With Applicator),Tablet [1100145] , Daclatasvir(60 Mg Tab),Tablet [20201192] , Hydrocortisone 1% Ointment(15 Gm Tube),Ointment [202209011] , Levocetrizine(10Mg),Tablet [202109111] , Milk Of Magnesia+Liquid Paraffin (11.25Ml+3.75Ml) /15Ml(200Ml Bottle),Syrup [120208] , Phenobarbitone(30 Mg),Tablet [110061] , Phenobarbitone(60 Mg Tab),Tablet [120253] , Ramipril(5 Mg),Tablet [4710288] , Risperidone(1Mg),Tablet [120714] , Risperidone(2 Mg),Tablet [110359] , Sofosbuvir(400Mg Tab),Tablet [20201190] , Spironolactone(25Mg),Tablet [120761] , Ipratropium Bromide Inhaler 20Mcg Per Puff(200 Metered Dose Container),Inhaler , Ipratropium Bromide + Levosalbutamol(20Mcg+50Mcg, 200 Mdi),Inhaler , Aceclofenac + Paracetamol + Chlorzoxazone(100 Mg + 325 Mg + 500 Mg),Tablet , Acetazolamide Tab(250Mg),Tablet [110263] , Albendazole Suspension 200Mg/5Ml(10 Ml Bottle),Syrup [110140] , Amoxicillin 250Mg + Clavulanic Acid 50Mg Inj Vial [1350003] , Amoxicillin + Clavulanic Acid(200 Mg + 28.5 Mg),Tablet [120411] , Amoxycillin And Clavulanic Acid I.P.(500Mg + 125Mg),Tablet [110079] , Amoxycillin +Potassium Clavulanic(250Mg + 125Mg),Tablet [140001] , Ampicillin 250 Mg + Cloxacillin 250 Mg( Cap),Capsule [120972] , Ampicillin(500 Mg/Vial),Injection [110082] , Ampicillin Inj(250 Mg/Vial),Vial [110080] , Ampicillin Syrup (125 Mg / 5 Ml 30 Ml Bottle),Syrup [120024] , Atenolol(100Mg),Tablet [110215] , Atenolol(25 Mg),Tablet [120395] , Azithromycin 1Gm + Cefixime 400Mg((1 + 1 Tab)),Tablet [120841] , Benzathine Penicillin(6 Lakh Iu/Vial),Vial [110123] , Benzathine Penicilline 12 Lac Iu / Vial(Vial),Injection [110124] , Cefadroxil Syrup(125 Mg / 5 Ml 30 Ml Bottle),Syrup [120061] , Cefixime Syrup 50Mg/5Ml(30 Ml Bottle),Syrup [987605] , Cefpodoxime(200 Mg (Dispersible Tab Also Accepted)),Tablet [110096] , Chloroquine Phosphate Suspension Equivalent To Chloroquine 160Mg/10Ml(160Mg/10Ml (60Ml Bottle), Suspension/Syrup),Suspension , Clarithromycin(250 Mg),Tablet [202209018] , Cloxacillin(125 Mg / 5 Ml 40 Ml Bottle),Syrup [120336] , Cloxacillin Sodium Inj.(500Mg),Vial [120093] , Diazepam(10 Mg),Tablet [120462] , Diclofenac Sodium + Paracetamol +Serratiopeptidase(50 Mg +325 Mg + 10 Mg),Tablet , Diethylcarbamazine Tab(100Mg),Tablet [110143] , Fexofenadine(120Mg),Tablet [140013] , Fexofenadine(180Mg),Tablet [140014] , Furosemide Tab(40Mg),Tablet [110265] , Ivermectin Usp(6Mg),Tablet [4710242] , Ketoconazole(200Mg),Tablet [700508] , Mebendazole(100 Mg Tab),Tablet [120191] , Meropenem(1000 Mg (Vial)),Injection [120522] , Meropenem(500 Mg / Vial),Injection [110119] , Meropenem Inj 125Mg/Vial(Each),Injection [110118] , Meropenem + Sulbactum (1 Gm + 500 Mg)(1.5 Gm Injection Vial),Injection , Moxifloxacin( 400Mg),Tablet [120930] , Nevirapine(50Mg/5Ml),Syrup [202301013] , Nifedipine(10Mg Tab),Tablet [110228] , Norfloxacin(200 Mg),Tablet [140031] , Ofloxacin 200Mg +Tinidazole 600Mg(Tab),Tablet [120227] , Ondansetron(Drops) Syrup(2Mg/5Ml (10 Ml Bottle)),Syrup [700583] , Ornidazole Tab(500 Mg),Tablet [120377] , Paracetamol Oral Drops(100 Mg/Ml (15 Ml Bottle With Dropper)),Drop [120245] , Piperacillin + Tazobactam 2000 Mg + 250 Mg 20Ml Vial( 2000 Mg + 250 Mg 20Ml Vial),Injection [120569] , Pyrazinamide(500 Mg),Tablet [202012161] , Pyrazinamide 750Mg Tablet(10X10),Tablet [700666] , Quinine Sulphate(300Mg),Tablet [110165] , Riboflavin(Tablet 5 Mg 10 X 10),Tablet [202209086] , Secnidazole(500 Mg Tab),Tablet [120387] , Streptomycin Inj(0.75G),Injection [4350209] , Sulfamethoxazole And Trimethoprim(100 Mg And 20Mg),Tablet [110128] , Telmisartan(80Mg),Tablet [140045] , Tinidazole(300 Mg),Tablet [110138] , Tinidazole(500Mg),Tablet [110137] , Tramadol(50Mg),Tablet [110019] , Voriconazole(200Mg),Tablet [202203029] , Zidovudine(50Mg/5Ml),Syrup [202305004] , Zinc Sulphate Dispersible(10Mg),Tablet [110420] , Acyclovir Inj(250 Mg/Vial),Injection [4350007] , Adrenaline(1 Mg / Ml (1 Ml Amp)),Injection [110043] , Alpha-Beta Arteether(150Mg/2Ml),Injection [110156] , Amikacin(250Mg/2Ml),Injection [110069] , Artemether Inj 80Mg/Ml(1 Ml Amp),Injection [1350005] , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection [110012] , Bupivacaine Hydrochloride 0.25%(20 Ml Vial),Injection [120050] , Bupivacaine Hydrochloride(0.5% (20 Ml Vial)),Injection [110010] , Bupivacaine Hydrochloride (Not For Spinal Use) (0.5%)( 4Ml Amp/Vial),Vial , Cefazolin Inj(500Mg Vial),Injection [110086] , Cefepime 1Gm And Tazobactam 125 Mg Inj(Vial),Solution [4350434] , Cefepime(500Mg Injection),Injection [4350329] , Cefotaxime Sodium(250 Mg Vial),Injection [110092] , Ceftazidime 1Gm/Vial Inj(1 Gm/Vial),Injection [110098] , Ceftazidime Inj(500Mg/ Vial),Injection [110097] , Ceftazidime Powder For Injection 250 Mg(Vial Of 1 Powder Injection With Appropriate Diluents),Injection [202209016] , Ceftriaxone(500Mg Vial),Injection [110100] , Ceftriaxone+Tazobactum(1Gm+125Mg,Vial),Injection [110102] , Ceftriaxone+Tazobactum 250Mg+31.25Mg(Vial),Injection [4350437] , Ceftriaxone+Tazobactum(500Mg+62.5Mg Vial),Injection [120070] , Chloroquine Phosphate(40Mg/Ml (5 Ml Amp)),Injection [110157] , Chlorpheniramine Maleate(10Mg/Ml Inj 10 Ml ),Vial [110047] , Clindamycin 600Mg (150Mg/Ml),Injection [202109026] , Dexamethasone Sodium Phosphate(8Mg/2Ml (2Ml Vial)),Injection [110037] , Dicyclomine(10Mg/Ml (2 Ml Amp)),Injection [110279] , Dobutamine Hcl 50 Mg/Ml(5Ml Amp),Injection [1100242] , Dopamine Hcl 40 Mg/Ml(5Ml Amp),Injection [1100244] , Heparin Inj(5000Iu/Ml 5Ml Vial),Injection [110195] , Iron Sucrose Usp(100 Mg/5 Ml (5 Ml Amp)),Injection [110411] , Ketamine Hydrochloride(10Mg/Ml (10Ml Vial)),Injection [110003] , Ketamine Hydrochloride(50Mg/Ml (10 Ml Vial)),Injection [120177] , Lignocaine 2% + Adrenaline 5 Mcg/Ml(30 Ml ),Injection [110009] , Magnesium Sulphate Injection(I.P.50 % W/V (1 Ml Amp)),Injection [120187] , Methyl Ergometrine Inj Meleate(0.2 Mg /Ml (1Ml Amp)),Injection [110347] , Metoclopramide 5Mg/Ml(2 Ml Amp),Injection [110287] , Midazolam(1Mg/Ml (5Ml Amp)),Injection [110014] , Ondansetron(2 Mg/ Ml (2 Ml Amp)),Injection [110291] , Oxytocin Inj(5 Iu/Ml (1Ml Amp)),Injection [700482] , Pentazocine Lactate(30Mg/Ml (1 Ml Amp)),Injection [4350028] , Pheniramine Maleate(22.75 Mg/Ml (2 Ml Amp)),Injection [120250] , Promethazine 25 Mg/Ml(1Ml Amp),Ampule [120851] , Propofal(Injection 10 Mg/Ml 1 Ml /Vial),Injection [202209003] , Propofol Sodium 1%W/V(10Mg/Ml (20Ml Vial)),Injection [110004] , Thiamine(Injection 100 Mg/Ml 1 Ml/Vial),Injection [202209087] , Tramadol(50Mg/Ml (2Ml Amp)),Injection [110018] , Tranexamic Acid Injection Bp/Ip(100Mg/Ml (5Ml Amp)),Injection [110198] , Vitamin B Complex Injection(Nfi Formula 30Ml/Vial),Injection [120308] , Cetrimide 15% W/V + Chlorhexidine 1.5% W/V(1 Liter Bottle),Bottle [110247] , Bleomycin(15 Units / Vial),Injection [700299] , Carboplatin(450Mg 45Ml Multidose Vial),Injection [110172] , Gemcitabine(1.4 Gm Vial),Injection [110180] , Irinotecan(40Mg/Vial),Injection [120172] , Topotecan(4Mg/4Ml Vial),Injection [202209032] , Digoxin Tab(0.25Mg),Tablet [110241] , Atenolol(50Mg Tab),Tablet [110216] , Hydrochlorothiazid(12.5 Mg),Tablet [202209042] , Methyl Prednisolone(4Mg),Tablet [120202] , Methyl Prednisolone Tab(16 Mg),Tablet [120201] , Pioglitazone(15 Mg),Tablet [120567] , Atenolol(25 Mg),Tablet [120395] , Atorvastatin Ip(20 Mg),Tablet [110239] , Cinnarizine(25 Mg),Tablet [110402] , Glimepiride(1 Mg),Tablet [110298] , Glimepiride(2 Mg),Tablet [110299] , Iron Folic Acid Sugar Coated (Red Tablet) Ferrous Sulphate Ip Equivalent To 60 Mg Elemental Iron & 500 Mcg Folic Acid Ip(60 Mg + 500 Mcg ),Tablet [110408] , Iron Folic Acid Sugar Coated Tablet Dried Ferrous Sulphate Ip Eq. To 45Mg Ferrous Iron And 400Mcg Folic Acid Ip (Pink Coloured Tab) -Wifs Junior Ifa Tablets (Detail Specification As Per Tender)(45Mg + 400Mcg),Tablet [110409] , Ferric Carboxymaltose 50Mg/Ml(20Ml Vial),Injection [122030] , Nilotinib(200Mg),Tablet Or Capsule [4710425] , Cyclosporine(100Mg),Capsule [202203030] , Cyclosporine(100Mg/ Ml),Solution [202203028] , Cyclosporine(50Mg),Capsule [202203031] , Degludec 100 Iu /Ml(3Ml Cartridge With Pen Inj.),Injection [140080] , Extended Half Life (Ehl) - Recombinant Factor Ix (Rfix)- Glycopegylated (Nonacog Beta Pegol)(500Iu),Vial [202303007] , Extended Half Life (Ehl) - Recombinant Factor Viii (Rfviii)- Glycopegylated (Turoctocog Alfa Pegol)(500Iu),Vial [202303006] , Insulin Biphasic Aspart 30:70 100 Iu/Ml (Firm Has To Supply Compatible Pen Along With Cartridges As And When Required Without Any Extra Cost)(3Ml Cartridge),Cartridges , Recombiant Fviia(1Mg/Vial),Vial [120861] , Recombiant Fviii(1000 Iu/Vial),Vial [120267] , Recombinant Anti - Hemophilic Factor Viii(250 Iu Inj / Vial),Injection [120265] , Recombinant Anti - Hemophilic Factor Viii(500 Iu Inj / Vial),Injection [120266] , Diltiazem(30 Mg),Tablet [110217] , Aceclofenac 100Mg+Paracetamol 325Mg Tab( ),Tablet [120002] , Amoxycillin Dispersible Tablets Ip-Amoxicillin Trihydrate Ip Equivalent To Amoxicillin(250Mg),Tablet [120022] , Amoxycilline(500Mg),Capsule [110073] , Cefadroxil(500 Mg),Tablet [700154] , Cefixime(200 Mg Tab (Dt Tablet Also Acceptable) ),Tablet [4710186] , Cefixime(50 Mg Dt),Tablet [110088] , Cefixime + Ofloxacin(200 Mg + 200 Mg),Tablet [120976] , Cefixime Tab Ip(100Mg),Tablet [120065] , Cefpodoxamine(200 Mg Tab),Tablet [201392] , Cephalexine(250Mg),Capsule [110104] , Ciprofloxacin(500Mg),Tablet [4350032] , Ciprofloxacin + Tinidazole(250 Mg + 300 Mg),Tablet [120328] , Ciprofloxacin + Tinidazole(500Mg+600Mg),Tablet [120080] , Diclofenac Sodium 50Mg + Paracetamol(325Mg),Tablet [120108] , Doxycycline(100 Mg),Capsule [110113] , Erythromycin Stearate(500 Mg),Tablet [120125] , Ibuprofen 400Mg+ Paracetamol 325Mg Tablet( ),Tablet [4710399] , Levofloxacin(250Mg),Tablet [110116] , Levofloxacin(500Mg),Tablet [110117] , Norfloxacin Tab. - 400Mg [4710033] , Ofloxacin + Ornidazole(200Mg And 500Mg),Tablet [120226] , Sulfamethoxazole And Trimethoprim(800Mg + 160Mg),Tablet [110130] , Tranexamic Acid(500 Mg Tab),Tablet [110199] , Etoricoxib (90Mg),Tablet [140012] , Prednisolone Tab 20 Mg(Dispersible Tablet Also Acceptable),Tablet [110042] , Sulfasalazine(500 Mg),Tablet [202207150] , 3 Fdc (P) (Isoniazid 50Mg, Rifampicin 75 Mg, Pyrazinamide 150 Mg)(Dstb-Ip (P)),Tablet [202403008] , Suspension For Intratracheal Instillation(80Mg/Ml (Pack Size As Licensed)),Suspension , Aminoacid (Essential) Infusion(10% 100Ml Glass Ffs),Bottle [120014] , Palbociclib(125 Mg),Tablet Or Capsule [202207128] , Recombinant Fix(1000Iu/Vial),Vial [120860] , Recombinant Fix(250Iu/Vial),Vial [120858] , Recombinant F Ix(500Iu/Vial),Vial [120859] , Anti Snake Venom Polyvalent Inj 10Ml (Lyophilized)(10 Ml Vial),Injection [110314] , Equine Anti Rabies Immunoglobulin,(Not Less Than 300Iu/Ml),Injection [120122] , Aceclofenac(100Mg),Tablet [110021] , Bromhexine Hcl 4 Mg+ Guaiphensin 50 Mg + Terbutaline Sulphate 1.25 Mg/5Ml Syp(100 Ml Bottle),Syrup [120049] , Cetirizine(10 Mg),Tablet [110044] , Disodium Hydrogen Citrate 1.25Gm/5Ml 100 Ml(100 Ml),Syrup [120882] , Ofloxacin(200Mg),Tablet [4710048] , Ranitidine(150Mg),Tablet [110277] , Alpha-Beta Arteether(150Mg/2Ml),Injection [110156] , Cefoperazone 1000Mg + Sulbactam 1000Mg Inj(Vial),Injection [110091] , Cefoperazone 1Gm /Vial Vial [120428] , Clindamycin 600Mg (150Mg/Ml),Injection [202109026] , Colistimethate Sodium For Injection Ip(2 M Iu Vial),Injection [202207026] , Methyl Prednisolone(500Mg),Injection [20200516] , Vecuronium Bromide(2Mg/Ml (2Ml Amp/Vial)),Injection [700398] , Voriconazole(200 Mg/Vials),Injection [202207174] , Buppivacaine 5 Mg, Dextrose80 Mg / Ml(4 Ml Injection),Injection [987852] , Oxytocin Inj(5 Iu/Ml (1Ml Amp)),Injection [700482] , Phytomenadione Injection 10Mg/Ml(10Mg Ampule),Injection [202202012] , Quinine Dihydrochloride(300Mg/Ml (2Ml Amp)),Injection [120716] , Liquid Medical Oxygen(Not Less Than 99 % V/V Of Oxygen - Dean-Datia-Ramavati Chemical),Other Item [20230448] , Monthly Rental And Maintenance Charges Of Lmo Setup Per Site(10Kl Dean-Datia-Ramavati Chemicals),Other Item [20230449] , Transportation And Other Charges Per Cubic Meter Of Medical Oxygen(Dean-Datia-Ramavati Chemicals),Other Item [20230450] , Iodised Peptone 0.322Mg (Equivalent To 33 Mcg Of Iodine), Magnesium Chloride Ip 6.67Mg(Equivalent To 0.8 Mg Of Magnesium), Manganese Sulphate Bp 1.33 Mg (Eq. To 0.33 Mg Of Manganese), Sodium Metavanadate 0.22Mg. Zinc Sulphate Ip 10.71 Mg(Eq. To 2.5Mg Of Zinc), Pyrodoxine Hydrochloride Ip 0.25 Mg Cyanocobalamin Ip 0.167 Mcg, Nicotinamide Ip 3.33 Mg, Ethanol (95%) Ip 0.317 Ml. Syrup 300 Ml ),Bottle [120892] , Peptonised Iron 176.5 Mg(Equivalent To 30 Mg Of Elemental Iron,Protein (As Peptone) 100 Mg,Folic Acid 200 Mcg, Vitamin B12 2.5 Mcg 100Ml),Bottle [20200910] , Amorolfine(0.25% W/W 30 Gm),Cream [202207190] , Atorvastatin(40Mg),Tablet [120767] , Methylcobalamin/Mecobalamin(500 Mcg),Tablet [120367] , Mometasone Furoate 0.1% - Salicylic Acid 5%(Tube),Cream [202207181] , Pregabalin (Sr Tablet Also Acceptable)(150 Mg),Tablet [202209007] , Silodosin(4 Mg),Tablet Or Capsule [202207346] , Silodosin(8Mg),Tablet Or Capsule [202207347] , Tamsulosin + Dutasteride 0.4 Mg + 0.5 Mg(Tab),Tablet [120600] , Teneligliptin(20Mg),Tablet [140046] , Hepatitis B Immunoglobulin(100 Iu/Vial),Vial [110319] , Plasma Derived Factor Viii(250Iu/Vial),Vial [120862] , Plasma Derived Factor Viii 500 Iu / Anti Hemophillic Factor Viii 500 Iu(Vial),Vial , Tenecteplase(40Mg),Injection [120771] , Amisulpride(50 Mg),Tablet [120406] , Aripiprazole 15 Mg(Tablet),Tablet [120414] , Clonazepam(1 Mg),Tablet [120333] , Clozapine(50 Mg),Tablet [120453] , Each 5Ml Contain Potassium Citrate I.P. 1100 Mgmagnesium Citrate U.S.P. 375 Mg Pyridoxine Hydrochloride I.P 20 Mg Colour Caramel(Each Ml Contains Approx.L Meq, Magnesium Ion, 2Meq. Potassium Ion, 3Meq. Citrate Ion And 4Mg Of Pyridoxine Hydrochloride),Bottle [20200904] , Enalapril Maleate Tab(2.5Mg),Tablet [110219] , Febuxostat(40 Mg Tab),Tablet [120988] , Flunarizine(10 Mg Tab),Tablet [120353] , Fluoxetine Cap(20 Mg),Capsule [120134] , Hydroxyzine 10Mg/5Ml Syrup,(100Ml Bottle),Syrup [202109040] , Hydroxyzine(25 Mg),Tablet [202209012] , Olanzapine(10Mg Tab),Tablet [4710498] , Olanzapine( 5 Mg),Tablet [120556] , Paracetamol + Phenylephrine + Chlorpheniramine Maleate (125Mg+2.5 Mg+1Mg) /Ml(15 Ml Bottle With Dropper),Drop [120561] , Tramadol(100Mg),Tablet [120297] , Amlodipine(10 Mg),Tablet [110214] , Cinacalcet(30 Mg),Tablet [202207019] , Faropenem(300Mg),Tablet [202207057] , Fluconazole(150 Mg),Tablet [110146] , Fluvoxamine(25Mg),Tablet [202207065] , Itraconazole Cap(100 Mg),Capsule [110147] , Paracetamol Tab(650 Mg),Tablet [700757] , Sevelamer(400 Mg),Tablet [202207148] , Tolvaptan(30 Mg),Tablet [202207167] , Emicizumab(Each 30Mg/Ml Each Vial),Vial [202211175] , Pertuzumab 30 Mg/Ml(420Mg/14Ml),Injection [202207313] , Bupivacaine Hcl For Spinal Anaesthesia(0.5%(Heavy)),Injection [110011] , Fentanyl Citrate Inj 50 Mcg/Ml(2Ml Ampoule),Ampule [110016] , Mephentermine Inj 30Mg/Ml(10 Ml Vial),Injection [120194] , Morphine Sulphate(10 Mg),Tablet [120816] , Morphine Sulphate Inj. Ip 10Mg/Ml(1Ml Ampoule),Injection [4350111] , Naltrexone(50 Mg),Tablet [120664] , Acyclovir Inj(250 Mg/Vial),Injection [4350007] , Acyclovir Intervenous Infusion I.P(500Mg/Vial),Injection [700017] , Adenosine(6 Mg/ 2Ml ),Injection [2023012002] , Calcium Leucovorin(50 Mg/Vial Inj),Injection [700213] , Esmolol 100 Mg/Vial(10Mg/Ml),Injection [120484] , Pralidoxime (Pam) Inj(25 Mg/Ml),Injection [4350085] , Streptokinase Inj 15 Lac Iu(Vial/Amp),Injection [1100210] , Vasopressin(20 Iu / Ml),Injection [202207379] , Ambroxol Hcl 15Mg+Terbutaline Sulphate 1.25Mg+Guaiphenesin 50Mg 5Ml((Additional Composition Of Menthol Also Acceptable) 100Ml Bottle),Syrup [120825] , Azithromycin(100Mg/5Ml (15 Ml Bottle)),Suspension [120034] , Bromhexine Hcl 4 Mg+ Guaiphensin 50 Mg + Terbutaline Sulphate 1.25 Mg/5Ml Syp(100 Ml Bottle),Syrup [120049] , Bromhexine Hydrochloride(4Mg/5Ml Syrup (50Ml Bottle)),Syrup [110383] , Calcium Carbonate 625 Mg, Vitamin - D3 125 Iu / 5 Ml(100 Ml Syrup),Syrup [120052] , Cetirizine(5Mg/5Ml (60 Ml Bottle)),Syrup [120071] , Cetirizine Syrup (5Mg/5Ml 30 Ml Bottle)(30Ml Bottle),Syrup [110045] , Chlorpheniramine Oral Liquid 2 Mg/5 Ml(30 Ml Bottel),Liquid [202209009] , Cyproheptadine Hcl + Tricholine Citrate(2Mg + 275 Mg / 5 Ml (200Ml Bottle)),Syrup [120097] , Dextromethorphan Hydrobromide Syrup 13.5 Mg/ 5Ml(30 Ml Bottle),Syrup [700411] , Diclofenac(1%),Ointment Or Cream Or Gel [120106] , Domperidone(1 Mg/ Ml 10 Ml With Dropper),Drop [120472] , Domperidone Suspension 1Mg/Ml(30Ml Bottle),Suspension [110285] , Furazolidone(25Mg/5Ml (60 Ml Bottle)),Suspension [120137] , Glucose Pouch(75 Gm)(Powder),Powder [120840] , Glycerine Ip Solution (Who-Gmp Certification Exempted For This Item)(100 Ml ),Bottle , Glycerin Oral Liquid Ip (Repacking License Is Also Eligible)(30 Ml Bottel),Liquid , Ketoconazole Ointment 2% 15Gm Tube(15 Gm),Ointment [4460030] , Lignocaine Hydrochloride(2% W/V (30 Gm Tube)),Gel [110007] , Metronidazole 100Mg/5Ml(30Ml),Syrup [120719] , Milk Of Magnesia+Liquid Paraffin (11.25Ml+3.75Ml) /15Ml(200Ml Bottle),Syrup , Multivitamin Syrup 60 Ml (Each 5Ml Contains-Vitamin A (Palmitate) Ip 1600 Iu+Vitamin D3 Ip 200 Iu(+Vitamin B2 Ip 1.00Mg+Vitamin B6 Ip 0.50Mg+Niacinamide Ip 15.00Mg+D-Panthenol Ip 1.00Mg (20% Variability In Strength Or With Additional Contents Acceptable)),Syrup [120897] , Norfloxacin 100Mg Metronidazole 100Mg( Per 5Ml),Suspension [120554] , Norfloxacin + Tinidazole((100 Mg + 100 Mg)/5 Ml 30Ml Syrup),Syrup [120220] , Paracetamol(125 Mg/Ml),Drop [20200720] , Paracetamol 150 Mg/Ml(15 Ml Bottle With Dropper),Drop [110028] , Paraffin Liquid(Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Mg),Syrup [4700084] , Potassium Chloride Oral Solution 100Mg/Ml(200Ml Bottle),Bottle [110414] , Povidone Iodine(5% 100 Ml),Solution [110427] , Povidone Iodine + Metronidazole(5 % + 1 % ),Ointment [120577] , Povidone Iodine Ointment 5%(15Gm Tube),Tube [110430] , Povidone Iodine Ointment 5% 250Gm Jar( ),Each [4340018] , Povidone Iodine Solution-5%(500 Ml),Bottle [120688] , Promethazine 5 Mg/5Ml(60 Ml Bottle),Syrup [110050] , Silver Sulphadiazine Cream(Usp 1% W/W 25Gm),Tube [110262] , Tinidazole 150 Mg / 5 Ml(60 Ml Bottle),Suspension [110139] , Turpentine Oil (Repacking License Is Also Eligible)(50Ml Bottle),Bottle [202208032] , Zinc Sulphate/Gluconate 10 Mg Elemental Zinc / 5 Ml(10 Mg /5 Ml),Syrup [120618] , Ceritinib(150Mg),Tablet Or Capsule [202207015] , Secukinumab 150 Mg/Ml(Powder For Solution For Injection),Injection [202207342] , Anti Thymocyte Immunoglobulin (Rabbit)(5Mg/Ml (25Mg Vial)),Injection [202203018] , Anti Rabies Vaccine I.P. Inj. Human (Tissue Culture) For I/D And I/M Route 2.5 Iu With(1Ml Diluents),Vial [119316R] , Diosmin (450Mg) + Hesperidin(50Mg),Tablet [202207230] , Perindopril 8Mg + Amlodipine 5Mg(8Mg + 5Mg),Tablet [202207138] , Perindopril 8Mg + Indapamide 2.5 Mg(8Mg + 2.5Mg),Tablet [202207137] , Pregabalin(75Mg),Capsule [140067] , Clopidogrel(75 Mg),Tablet [4710026] , Buprenorphine 20 Mg Patch(Each Patch),Each [120830] , Fentanyl T.D. Patch T D(50 Micro Gram/Hour),Patch [202207239] , Airway, Nasopharyngeal, Sterile, Single Use, Set With 6.5Mm(External Diameter),Consumable [202208028] , Trucut Biopsy Needle(18 G Length 15 Cm Without Gun),Each [202406001] , Alprazolam(Tab 0.25Mg),Tablet [110364] , Atorvastatin + Asprin(10Mg + 75Mg),Tablet Or Capsule [140002] , Betamethasone(0.5 Mg),Tablet [110036] , Bisoprolol(5 Mg),Tablet [202109163] , Disodium Hydrogen Citrate(1.4Gm/5Ml)(200Ml),Syrup [120809] , Enalapril Maleate(Tab 10 Mg),Tablet [202209039] , Finofibrate(160 Mg),Tablet [202209040] , Hydrochlorothiazide Tab(25 Mg),Tablet [110267] , Ivermectin(Tab 12 Mg),Tablet [202209026] , Loperamide(2Mg),Tablet [120828] , Omeprazole + Domperidone 20 Mg + 10 Mg(Capsule),Capsule [120557] , Pantaprazole(40Mg Tab),Tablet [4710114] , Prednisolone(10 Mg (Dt Also Acceptable)),Tablet [110041] , Prednisolone (Dt Tablets Also Accepted)(5Mg),Tablet [120572] , Propranolol Tab(10 Mg),Tablet [110230] , Ramipril(2.5 Mg),Tablet [110231] , Sildenafil(50 Mg),Tablet [120732] , Tamsulosin(0.4Mg),Tablet [120282] , Torsemide(20Mg),Tablet [110271] , Warfarin(2 Mg),Tablet [202209076] , Warfarin Sodium(5 Mg),Tablet [110196] , Aceclofenac 100Mg+Paracetamol 325Mg Tab( ),Tablet [120002] , Beclomethasone Dipropionate, Clotrimazole, Neomycine Sulphate, Chlorocresol(0.025% + 1% + 0.5% + 0.1% W/W (5Gm Tube)),Ointment Or Cream [120039] , Benzoic Acid + Salicylic Acid(6% + 3% (15 Gm Tube)),Ointment [120320] , Betamethasone Valerate Cream 0.05%(15Gm Tube),Ointment [120042] , Carbamazepine(200 Mg),Tablet [110057] , Clindamycin(300Mg ),Tablet Or Capsule [120776] , Diclofenac Sodium 50Mg + Paracetamol(325Mg),Tablet [120108] , Domperidone(10Mg),Tablet [110284] , Doxycycline(100 Mg),Capsule [110113] , Ibuprofen(400Mg),Tablet [110026] , Levocetirizine + Monteleukast(5 Mg + 10 Mg),Tablet [120516] , Mupirocin(2% W/W (5 Gm Tube)),Ointment Or Cream Or Gel [110250] , Pantoprazole 40 Mg, Domperidone 10 Mg(Tab),Tablet [120243] , Risperidone(2 Mg),Tablet [110359] , Silver Sulphadiazine Cream Usp 1%(500 Gm Jar),Cream [700600] , Telmisartan(40 Mg),Tablet [110233] , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet [20200514] , Clarithromycin(500Mg),Injection [120774] , Colistinethate Sodium Inj Bp(1 Million Iu),Injection [700764] , Colistin Sulphate(12.5 Mg / 5 Ml 30 Ml Bottle),Suspension [120337] , Finasteride(1Mg),Tablet [202207058] , Levetiracetam(100Mg/Ml),Injection [202109043] , L Ornithine And L Aspartate(5Mg/10 Ml),Injection [202207277] , Mycophenolate(250 Mg),Tablet Or Capsule [202207114] , Sevelamer Carbonate(800Mg),Tablet [140035] , Sodium Bicarbonate Inj. - 7.5% W/V(10Ml),Ampoule [4350083] , Teicoplanin(200 Mg /Vial),Injection [120602] , Thiamine Hcl.2Ml(Each Ml Contains 50Mg) 50 Mg Inj(.),Injection [120950] , Tofacitinib(5Mg),Tablet [202207162] , Tramadol(50Mg/Ml (2Ml Amp)),Injection [110018] , Vancomycin Hydrochloride(250Mg Vial),Injection [120300] , Vancomycin Hydrochloride(500Mg),Injection [120302] , Amoxicillin And Clavulanic Acid I.P.(200+28.5Mg (30 Ml Bottle)),Syrup [110078] , Amoxycillin 250 Mg + Cloxacillin 250 Mg(250Mg + 250Mg),Capsule [120970] , Clopidogrel (75Mg) + Aspirin(75Mg Tab),Tablet [4710496] , Voglibose(0.3Mg (Mouth Dissolving Tablet Also Acceptable)),Tablet [120311] , Azithromycin(500 Mg/5Ml Inj ),Vial [120033] , Ivf (L-Alanine + L-Glutamine)(50 Ml),Injection [120798] , Chloroquine Phosphate Suspension Equivalent To Chloroquine(50Mg/5Ml (60 Ml Bottle)),Suspension [110158] , Dextromethorphan 10Mg/5Ml(100Ml Bottle),Syrup [120105] , Dextromethorphan Syrup(60Ml Bottle)(10Mg/5Ml),Syrup [120847] , Ibuprofen Syrup 100Mg/5Ml (60 Ml Bottle)(60 Ml Bottle),Syrup [110025] , Magnesium Hydroxide + Aluminium Hydroxide Simethecon 250 Mg + 250 Mg + 50 Mg/ 5 Ml 170 Ml Bottle(Syrup),Syrup [120518] , Ofloxacin Suspension 50Mg/5 Ml(30 Ml Bottle),Suspension [120224] , Vitamin B Complex Nfi Formula(100Ml Bottle),Syrup [120310] , Vitamin B Complex Nfi Formula(200Ml Bottle),Syrup [120309] , Diacerin 50Mg + Glucosamine 750Mg(Tab.),Tablet [202207225] , Labetalol(100 Mg),Tablet [110221] , Vitamin B1(Thiamine 100 Mg),Tablet [120613] , Vitamin D3 (Cholecalciferol)(400 Iu /Ml (100 Ml Bottle)),Syrup [120615] , Acyclovir 3%(Ointment),Ointment [202211096] , Alpha-Beta Arteether Inj 75 Mg /Ml 1Ml 1Ml Amp( ),Injection [120011] , Amiodarone 50Mg/Ml(3Ml Vial/Amp),Injection [1100207] , Carboprost(250 Mcg (1 Ml Amp/Vial)),Injection [110303] , Chloramphenicol + Dexamethasone 1% + 0.1%(Eyedrops-5 Ml Vial),Eye Drop [202204020] , Citicoline(250Mg/Ml),Injection [202207202] , Clotrimazole 1%W/V +Lignocaine 2%W/V Ear Drop 10Ml Vial Bfs/Ffs Squeeze(10Ml Vial),Vial [4790061] , Dobutamine(12.5 Mg / Ml 20 Ml Vial),Injection [110243] , Gatifloxacin(0.3% ),Eye Drop [120138] , Gentamicin 0.3%(10Ml),Eye And Ear Drop [20210223] , Gentamycin Sulphate 0.1%(15Gm Tube),Ointment Or Cream [120143] , Haloperidol Inj(5Mg/Ml (1 Ml Amp)),Injection [4350087] , Labetalol 5 Mg/Ml(4Ml Ampl),Injection [202209043] , Lantanoprost Eye Drop 0.005%(5Ml),Eye Drop [120895] , Medroxyprogesterone Acetate(Injection 150 Mg 1 Ml / Vial),Injection [202209064] , Methylprednisolone Acetate Ip(80Mg/2Ml),Injection [202207292] , Metronidazole(0.75 % Cream),Tube [202207294] , Moxifloxacin 0.5% W/V(5 Ml),Eye Drop [120534] , Moxifloxacin+ Ketorolac(0.5% W/V Plus .5% W/V),Eye Drop [202207299] , Normal Saline(Nasal Drops: Sodium Chloride Drops 0.05% W/V 10 Ml Vial),Drop [202209053] , Phenobarbitone(200 Mg/Ml),Injection [110060] , Piperacillin + Tazobactum(4.5 G),Injection [110127] , Salicylic Acid 6 % Ointment(6 % Ointment),Ointment [110261] , Sodium Thiopentone - 0.5 Gm Powder/Vial(20Ml Vial),Injection [4350057] , Sulfacetamide(20%),Eye Drop [4240002] , Tobramycin + Dexamethasone(0.3%W/V + 0.1%W/V (5Ml Vial)),Eye Drop [120292] , Tropicamide(1% 5Ml Vial),Eye Drop [110328] , Vitamin K1(1Mg/0.5Ml (0.5 Ml Amp)),Injection [110418] , Neostigmine(0.5Mg/Ml (1Ml Amp)),Injection [110322] , Extended Half Life (Ehl) - Recombinant Factor Viii (Rfviii)- Pegylated (Rurioctocog Alfa Pegol)(500Iu),Vial [202303005] , Human Albumin Solution 5%(250 Ml Bottel ),Injection [202209072] , Plasma Derived Activated Prothrombin Complex Concentrate(500 Units/Vial),Injection [120865] , Atracurium(10Mg/Ml ),Injection [110032] , Feracrylum 1% 100 Ml Solution(1% 100Ml),Solution [202109104] , Feracrylum 1% Gel(15Gm),Tube [20200512] , Ropivacaine Hydrochloride(0.2 % 2Mg/Ml),Injection [202207335] , Aceclofenac 100Mg+Paracetamol 325Mg + Serratiopeptidase 15Mg(10X10),Tablet [120857] , Cefepime(250 Mg/Vial),Injection [120397] , Ceftazidime(250Mg/Vial),Injection [120068] , Olmesartan Medoxomil( 20 Mg),Tablet [120997] , Surgical Spirit Ip(500 Ml),Bottle [120599] , Etomidate Vial (2Mg/Ml) -(10Ml Vial),Injection [202207054] , Aceclofenac 100 Mg +Paracetamol 325 Mg +Chlorzoxazone 250 Mg(100Mg+325Mg+250Mg),Tablet [202207187] , Cefuroxime 750Mg Powder For Solution For Injection(750Mg),Powder [700519] , Thiocolchicoside(4 Mg),Tablet Or Capsule [202207364] , Acarbose Tab(50Mg),Tablet [120001] , Aceborophylline(100 Mg ),Capsule [700389] , Aciclovir Tab 400 Mg(400 Mg Dt Tablet Also Acceptable),Tablet [4710112] , Adapalene(0.1%W/W),Gel [202109147] , Allopurinol(300 Mg),Tablet [202209006] , Amitriptyline Tab. Ip(25 Mg),Tablet [120016] , Artesunate + Sulphadoxine + Pyrimethamine(Age Group Of Less Than 1Year)(25 Mg (3 Tab) + 250 Mg (1 Tab) + 12.5Mg Tablets Ip(1Tab) (Dispersible Tablet Also Aceepted)),Tablet [110151] , Benzoyl Peroxide Gel 5%(15 Gm Tube),Tube [202209048] , Bromocriptine(2.5 Mg),Tablet [202207195] , Calcium Acetate(667 Mg),Tablet [140003] , Carbamazepine(100 Mg / 5 Ml 100 Ml Bottle),Syrup [110059] , Carbamazepine(200 Mg),Tablet [110057] , Carvedilol (12.5Mg),Tablet [202109088] , Chlordiazepoxide(10 Mg),Tablet [120439] , Chlordiazepoxide(25 Mg),Tablet [120438] , Chlorpromazine(100 Mg),Tablet [700452] , Chlorthalidone(12.5Mg ),Tablet [202209036] , Clobazam( 5 Mg),Tablet [120330] , Clobetasole Propionet 0.05% + Salicylic Acid 3%(15Gm Tube),Ointment [202207022] , Clobetasole Propionet 0.05% + Salicylic Acid 6%(15Gm Tube ),Ointment [202207023] , Clotrimazole 1% W/V(15Ml),Mouth Paint [120449] , Clotrimazole Vaginal Tablet I.P. - 100Mg(Without Applicator),Tablet [120842] , Dexamethasone(0.5Mg),Tablet [110038] , Dicyclomine(10Mg),Tablet [4710058] , Diloxanide Furoate(Tablet 500 Mg),Tablet [202209024] , Diltiazem Tablet(60 Mg),Tablet [120109] , Diphenhydramine Syrup(12.5Mg/5Ml (100 Ml Bottle)),Syrup [700582] , Donepezil(10 Mg),Tablet [120647] , Doxophylline(400 Mg),Tablet [120473] , Each Uncoated Chewable Tablet Contains Dride Aluminium Hydroxide I.P 240 Mg Magnesium(Hydroxide I.P 100Mg Activated Dimethicone I.P 25Mg Light Magnesium Carbonate Ip 60Mg),Tablet [120986] , Entecavir(1 Mg Tablet/Capsule),Tablet Or Capsule [20201196] , Ethamsylate Tab(250 Mg),Tablet [110197] , Ethamsylate Tab(500Mg),Tablet [120129] , Etiophylline +Theophylline((46.5+14)Mg / 5Ml (100 Ml Bottle)),Syrup [110374] , Etophylline + Theophylline Sr Tablet 231Mg + 69Mg( ),Tablet [120487] , Frusemide 20Mg + Spironolactone 50Mg(Tablet),Tablet [120136] , Gabapentin(300Mg),Tablet [202109037] , Glimepiride + Metformin Hydrocloride Sr(1 Mg + 500 Mg),Tablet [120496] , Haloperidol(1.5 Mg),Tablet [120652] , Hydroxychloroquine(400 Mg),Tablet [20200302] , Imipramine(25Mg),Tablet [202112010] , Lactulose(10Gm/15Ml (100 Ml Bottle)),Solution [110296] , Levetiracetam 100Mg/Ml Syrup/ Solution(100Ml Bottle),Syrup [202109044] , Lorazepam(2 Mg),Tablet [110368] , Luliconazole(1% W/W),Cream [202207286] , Metformin + Glimepiride(500 Mg + 2 Mg Tablet (Sr Form Also Acceptable)),Tablet [120524] , Methyl Ergometrine Maleate Tab(0.125Mg),Tablet [4710018] , Metoprolol(50Mg),Tablet [110226] , Metronidazole Tab(200 Mg),Tablet [110134] , Nitrofurantoin(100Mg),Tablet Capsule [120217] , Oseltamivir 30Mg(Capsule),Capsule [120234] , Oseltamivir(45Mg),Capsule [120236] , Oxcarbazepine(300 Mg),Tablet [120379] , Pentoxyfylline(400 Mg),Tablet [202207308] , Perindopril(8Mg),Tablet [202207139] , Phenytoin Sodium Oral Suspension - 25 Mg/Ml(100 Ml Bottle Suspension),Suspension [110065] , Povidone Iodine Vaginal(200 Mg),Pessary [110428] , Sitagliptin(100 Mg),Tablet [120271] , Sodium Valporate(300 Mg),Tablet [120598] , Tamoxifen(10 Mg),Tablet [120281] , Terbinafine Hcl 1% W/W(10Gm Tube ),Cream [202207361] , Ticagrelor(90Mg),Tablet [202207400] , Tricholine Citrate + Sorbitol(550 Mg + 7.15 G/10 Ml ),Syrup [120610] , Vildagliptin + Metformin(50Mg + 500Mg),Tablet [120305] , Vitamin D3 Drop 10Ml (Cholecalciferol 400 Iu)(10 Ml Drop),Drop [120916] , Voglibose(0.2 Mg),Tablet [202207172] , Zolpidem 10 Mg(Tablet),Tablet [120678] , Ethamsylate Inj(250Mg (2Ml Amp)),Injection [4350314] , Ethinylestradiol (A) + Levonorgestrel (B)(Tablet 0.03 Mg (A) + 0.15 Mg (B) 10X10),Tablet [202209061] , Fluconazole Eye Drop 3 Mg/Ml(10 Ml Vial), 5Ml Eye Drop(5 Ml Eye Drop),Drop [202209078] , Mebeverine Hydrochloride(200Mg),Tablet [202207289] , Methylcobalamine (Vitamin B12) 500 Mcg /Ml 3 Ml [120527] , Micronised Progestrone(200 Mg),Tablet [110308] , Cisplatin(10 Mg),Injection [202109023] , Cyclophosphamide Inj(200 Mg/Vial),Injection [120095] , Etoposide(100Mg Vial),Injection [110178] , Vinblastine(10Mg),Injection [4350303] , Vincristine Sulphate((1Mg/Ml) 1 Ml Vial),Injection [202401003] , Clindamycin(150Mg/Ml (2 Ml Vial/Amp)),Injection [110111] , Docetaxel(120Mg Vial),Injection [110175] , Docetaxel(20Mg),Injection [120113] , Docetaxel( 80Mg Inj (Docetaxel Concentrate Also Acceptable)),Injection [120114] , Enoxaparin (20Mg/0.2Ml)(0.2 Ml Prefilled Syringe ),Injection [4350435] , Epirubicin(100Mg/Vial),Injection [110177] , Imipenem 500 Mg With Cilastatin 500Mg(Vial/Amp),Injection [120789] , Oxaliplatin(100Mg),Injection [110184] , Paclitaxel Inj(100Mg ),Injection [120694] , Carvedilol(3.125 Mg),Tablet [120058] , Enoxaparin(40Mg Equivalent To- 4000 Iu Vial/Pfs),Injection [110192] , Enoxaparin(60Mg Equivalant To- 6000 Iu Vial/Pfs),Injection [110193] , Diphtheria Antitoxin 10000 Iu(10Ml Vial),Injection [110318] , Ciprofloxacin Inj 200 Mg/100 Ml(100 Ml Ffs Bottle),Infusion [110110] , Dextrose 5%(500Ml Ffs Bottle),Injection [110389] , Dextrose With Saline(5% + 0.9% (500Ml Ffs Bottle)),Injection [110390] , Electrolyte P (Multi-Electrolytes And Dextrose Injection Type I Ip) I/V Fluid (Each 100Ml Contains: Anhydrous Dextrose 5Gm Potassium Chloride 0.13Gm, Sodium Acetate 0.32Gm, Dibasic Potassium Phosphate 0.026Gm)(500 Ml Ffs Bottle),Injection [110394] , Mannitol Inj. 20% 350Ml Ffs Bottle [700315] , Metronidazole 500Mg/100 Ml(100 Ml Ffs Bottle),Injection [110133] , Ringer Lactate Ip I/V 0.24 % W/V Of Lactic Acid ( Eq. To 0.32% W/V Of Sodium Lactate), 0.6 % W/V Sodium Chloride, 0.04 % W/V Potassium Chloride And 0.027 % W/V Calcium Chloride(500Ml Ffs Bottle),Infusion [110398] , Amoxycillin +Clavulanic Acid((Amoxycillin 500 + Clavulanic Acid 100 Mg)/Vial),Injection [110077] , Ciprofloxacin(250Mg),Tablet [110107] , Ibuprofen(400Mg),Tablet [110026] , Imipenem 250Mg+Cilastatin 250Mg (Powder For Solution(1 Each)),Injection [120889] , Methyl Prednisolone Sodium Succinate Inj.1000Mg Vial(1000Mg Vial),Injection Solution For [4350231] , Metronidazole Tab(400Mg),Tablet [110135] , Paracetamol(500Mg),Tablet [110027] , Vancomycin Hydrochloride(1000Mg Vial),Injection [120301] , Needle Free(Connector),Consumable [202305002] , Titanium Chemo Port With Silicon Catheter (8 Fr) Length -60Cm-80Cm, Guide Wire, Peel-Away Desilet, Hubsite Needle(22 G * 20 -25.4Mm),Consumable [202403004] , Cefadroxil 250 Mg(Tab),Tablet [120396] , Cefixime(200 Mg Tab (Dt Tablet Also Acceptable) ),Tablet [4710186] , Cefixime Tab Ip(100Mg),Tablet [120065] , Cefopodoxime 50 Mg/5 Ml Suspension(30Ml),Bottle [202109017] , Cefpodoxime Tablet 100 Mg(Dt Tablet Also Acceptable),Tablet [120398] , Cephalexine(Each 5Ml Contains 125Mg (30Ml Bottle)),Syrup [110106] , Ciprofloxacin + Tinidazole(250 Mg + 300 Mg),Tablet [120328] , Diclofenac 50Mg +Paracetamol 325Mg+Chlorzoxazone 500Mg(Tab),Tablet [987680] , Diclofenac+Paracetamol+Chlorzoxazoe(50 Mg + 325 Mg + 250 Mg),Tablet [120464] , Dicyclomine Hydrochloride(20 Mg),Tablet [110281] , Furazolidone(100Mg),Tablet [1100112] , Multivitamin Sugar Coated Tab Nfi Formula Multivitamin Sugar(Item With Additional Vitamin Will Also Be Considered And Film Coated Also Acceptable),Tablet [110412] , Norfloxacine 400Mg And Tinidazole 600Mg(Tab),Tablet [120221] , Piroxicam(20Mg),Tablet Or Capsule [110031] , Sulfamethoxazole And Trimethoprim(400Mg + 80Mg),Tablet [110129] , Sulfamethoxazole And Trimethoprim(800Mg + 160Mg),Tablet [110130] , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet [20200514] , Beclomethasone Dipropionate, Clotrimazole, Neomycine Sulphate, Chlorocresol(0.025% + 1% + 0.5% + 0.1% W/W (5Gm Tube)),Ointment Or Cream [120039] , Bupropion(150 Mg),Tablet [120641] , Domperidone(10Mg),Tablet [110284] , Flunarizine(5 Mg),Tablet [110437] , Folic Acid Ip(5 Mg),Tablet [110406] , Levocetirizine + Monteleukast 2.5 Mg + 4 Mg / 5 Ml(60 Ml Bottle,Suspension),Suspension [121214] , Permethrin Lotion 5% W/V(60 Ml Bottle),Lotion [4000008] , Salbutamol Sulphate (2Mg/5Ml 60Ml)(60Ml Bottle),Syrup [110381] , Wax Solvent Ear Drops: Benzocaine(2.7% W/V 10 Ml Bottel Drop),Drop [202209054] , Wax Solvent Ear Drops:Paradichlorobenzene(2 % W/V 10 Ml Bottel),Drop [202209055] , Liquid Medical Oxygen(Not Less Than 99 % V/V Of Oxygen - Yash),Other Item [202301004] , Monthly Rental And Maintenance Charges Of Lmo Setup Per Site(Yash),Other Item [202212018] , Transportation And Other Charges Per Cubic Meter Of Medical Oxygen(Yash),Other Item [202301010] , Capecitabine(500Mg),Tablet [110171] , Cefixime Oral Suspension(100 Mg / 5 Ml (30 Ml Bottle)),Suspension [110090] , Ceftriaxone(250Mg Vial),Injection [110099] , Doxorubicin (Lyophilised)(50Mg Vial),Injection [110176] , Gentamicin 0.3% Eye/Ear Drops(5Ml Ffs Squeeze Vial),Eye Drop [130142] , Hyoscine Butylbromide 20Mg/Ml(1Ml Vial/Amp),Injection [110283] , Imatinib(400 Mg Tab),Tablet [110181] , Isoxsuprine(10Mg),Tablet [120174] , Letrozole(2.5 Mg),Tablet [120728] , Mifepristone(200 Mg),Tablet [110348] , Paclitaxel 260Mg(43.34Ml Vial),Injection [110185] , Permethrin Cream 5% W/V(60 Gm),Tube [202202011] , Azithromycin(200Mg/5Ml (15 Ml Bottle)),Syrup [110085] , Beclomethasone Dipropionate, Neomycin Sulphate, Miconazole Nitrate(0.025 % + 0.5 % + 2 % (5 Gm Tube)),Ointment [120040] , Betamethasone Dipropionate(0.05% (15Gm) Tube),Ointment Or Cream [110254] , Calcium Phosphate(2 : 1 Ratio (100 Ml Bottle)),Syrup(Each 5 Ml Contains :- Calcium 82 Mg + Vitamin D3 (Cholecalciferol) 200 Iu + Vitamin B12 (Cynocobalamin) 2.5 Mcg),Syrup [120699] , Chlorpheniramine 2Mg+ Dextromethorphan 10Mg /5Ml(100Ml),Syrup [202109019] , Clindamycin(1% W/W 10 Gm),Gel [120329] , Clotrimazole Cream - 1%(15 Gm Tube ),Cream [4150001] , Clotrimazole I.P.- 2%W/W(15Gm Tube),Cream Or Gel [110144] , Cyproheptadine Hydrochloride Ip(2Mg Each 5Ml),Syrup [140072] , Diphenhydramine(25Mg),Capsule [120110] , Gamma Benzene Hexachloride Solution/Lotion 1%((100 Ml)),Bottle [110256] , Hydrocortisone(Ointment 0.5% 15 Gm),Ointment Or Cream [202209010] , Hydroquinone 2% + Mometasone 0.1% + Tretinoin0.025%(5 Gm Tube),Cream [202207074] , Levosalbutamol 1 Mg / 5 Ml( Syrup),(100 Ml Bottle),Syrup [202207094] , Miconazole Cream I.P. 2% W/W(15 Gm Tube),Cream Or Ointment [110249] , Omeprazole(20Mg),Capsule [120230] , Omeprazole Capsule(40 Mg),Capsule [120376] , Omeprazole + Domperidone 20 Mg + 10 Mg(Capsule),Capsule [120557] , Ors Who Powder Glucose Anhydrous 13.5G/L, Sodium Chloride 2.6G/L, Potassium Chloride 1.5G/L, Trisodium Citrate 2.9G/L(As Per Attached Pack Specification),Powder [4520020] , Paracetamol Syrup/Suspension 125 Mg/5Ml (60Ml Bottle)(Syrup),Syrup [4700001] , Permethrin Cream 5% W/V(60 Gm),Tube [202202011] , Permethrin Lotion 5% W/V(60 Ml Bottle),Lotion [4000008] , Sertaconazole(2% W/W),Cream [202207345] , Vitamin A Syrup(100000 Iu/Ml With Market Spoon For 1Ml And 2 Ml (100 Ml Bottle)),Syrup Or Solution [110417] , Zinc Sulphate Syrup - 20Mg/5Ml(50 Ml Bottle),Syrup [4700009] , Aceclofenac(100Mg),Tablet [110021] , Amoxicillin Cap(250 Mg),Capsule [4070001] , Amoxycilline(500Mg),Capsule [110073] , Ampicillin(250 Mg),Capsule [120718] , Artesunate 150Mg (3Tab) + Sulphadoxine 500Mg + Pyrimethamine 25Mg ( 2 Tab )(Age Group 9 To 14 Years Combi),Tablet Combi Red Colour Blister Pack [110154] , Artesunate 50 Mg (3 Tab) + Sulphadoxine 500 Mg + Pyrimethamine 25 Mg (1 Tab)(Age Group Between 1-4 Year),Combi Blister Pack [110152] , Artesunate + Sulphadoxine + Pyrimethamine Ip(100 Mg(3Tab) + 750Mg + 37.5Mg (1Tab) (Age Group Between 5 To 8 Years)),Combi Blister Pack [110153] , Atorvastatin(40Mg),Tablet [120767] , Cephalexine(250Mg),Capsule [110104] , Cephalexine(500Mg),Capsule [110105] , Montelukast(5 Mg),Tablet [202209071] , Iron & Folic Acid With Vitamin B12 Capsules (Time Released) Each Timed-Release Capsule Contains:(Ferrous Fumarate (In Sr Form) Ip 200Mg Eq. To 64Mg Elemental Iron Cyanocobalamine Ip 15Mcg Folic Acid Ip 1.5Mg),Capsule [120937] , Anastrozole Tablet(1 Mg),Tablet [120832] , Gemcitabine(1000Mg Vial),Injection [120140] , L-Asparaginase 5000 Iu Lyophilized(Vial),Injection [120180] , Temozolomide(100Mg),Capsule [120285] , Temozolomide(20Mg),Capsule [120286] , Theophylline + Etophylline(35Mg+115Mg),Tablet [120740] , Erythropoietin(10000Iu Inj),Injection [4350419] , Pegfilgrastin(6 Mg/0.6Ml (0.6Ml Vial/Pfs)),Injection [202207312] , Rh-Erythropoetin(2000 I.U),Injection [110205] , Labetalol(20 Mg/4 Ml (4Ml Amp)),Injection [110222] , Cefotaxime Sodium(500 Mg/Vial),Injection [110093] , Inj Acetylcysteine 200 Mg/Ml (1 Ml Amp) , Inj Bupivacaine Heavy 4 Ml , Inj Clonidine 150 Mcg/Ml , Inj Dexmedetomidine 100 Mcg/Ml , Inj Digoxin 0.5 Mg/ 2Ml , Inj Dextomide 100 Mcg/Ml , Inj Doxycycline 100 Mg , Inj Diltiazem 5 Mg/Ml , Iohexol Injection 350 Mg Iodine/Ml(100 Ml Vial),Injection [202211184] , Iohexol Injection 350 Mg Iodine/Ml(20 Ml Vial),Consumable [20200729] , Inj Lidocaine 4% , Inj Lidocaine2% , Inj Lignocaine With Adrenaline 4% , Inj Lignocaine Hcl Preservative Free 50 Ml For Iv Use , Inj Multivitamin For Iv Use 10 Ml , Inj Milrinone 10 Mg/10 Ml , Inj Myopyrolate (Glycopyrrolate 0.5 Mg + Neostigmine 2.5 Mg) , Inj Netilmycin 50 Mg , Inj Nitroglycerine 5 Mg/Ml , Inj Sodium Valproate 500 Mg , Inj Tetanus Toxoid , Inj Tigecycline50 Mg , I/V Normal Saline 3% 100 Ml , I/V Normal Saline 1/2 0.45% 500 Ml , I/V Dextrose 50% 100 Ml , I/V Isolyte M 500 Ml , I/V Paracetamol 100 Ml , I/V Total Parentral Nutrition 2000 Ml , I/V Tinidazole 400 Ml , Distilled Water 500 Ml , Sevoflurane (250 Ml Bottle) , Isoflurane (250 Ml Bottle) , Water For Injection 50 Ml , Tab Pheniramine Maleate 25 Mg , Tab Antioxidant , Tab Bisacodyl 5Mg , Tab Cabergoline 0.25 Mg , Tab Cabergoline 0.5 Mg , Tab Cefodoxime 200 Mg , Tab Frusemide 40 Mg , Cap Hydroxy Urea 250 Mg , Tab Methylprednisolone 4 Mg , Tab Methylprednisolone 8 Mg , Tab Methylprednisolone 16 Mg , Tab Paracetamol+Tramadol , Tab Thicolchicoside 8 Mg , Tab Tadalafil 5 Mg , Tab Tadalafil 10 Mg , Tab Nortryptyline 10 Mg , Tab Nortryptyline 25 Mg , Tab Mitrazepine 7.5 Mg , Tab Mitrazepine 15 Mg , Tab Baclofen 10 Mg , Tab Baclofen 20 Mg , Tab Melatonin 3 Mg , Tab Melatonin 5 Mg , Tab Atomoxetine 10 Mg , Tab Etiozolam 0.25 Mg , Tab Etiozolam 0.5 Mg , Tab Clomiperamine 75 Mg , Tab Naproxen 250 Mg , Tab Naproxen 500 Mg , Tab Desvenlafexine 25 Mg , Tab Desvenlafexine 50 Mg , Tab L-Methylfolate 7.5 Mg , Tab Tropiramate 50 Mg , Tab Glycopyyrolate 2 Mg , Syp Antioxodant 100 Ml , Syp Paracetamol+Tramol 60 Ml , Syp Ciprofloxacin+Metronidazole 30 Ml , Syp Ofloxacin+Tinidazole 30 Ml , Syp Dicyclomine , Syp Phenobarbital 20 Mg/5 Ml , Syp/Tab Pyrimethamine+Sulfadiazine , Syp Caffeine Citrate , Syp Ranitidine 150 Mg , Drop Digoxin , Drop Multivitamin , Probiotic Sachet , Hmf ( Human Milk Fortifier) Sachet , K Binder (Calcium Polystyrene Sulphonate ) Powder 15 Gm , Mct (Medium Chain Triglyceride) Oil , Respule Acetylcysteine , Inhaler Salbutamol 50 Mcg + Beclomethasone 50 Mcg , Ear Drop Neosporin , Ear Drop Ofloxacin+Clotrimazole+Beclomethasone , Ear Drop Neosporin+Beclomethasone+Clotrimazole , Ear Drop Ofloxacin+Dexamethasone , Ear Drop Fluconazole , Nasal Drop Ciprofloxacin+Dexamethasone , Nasal Drop Botroclot (Haemocoagulase Solution) , Oint Magnesium Sulphate,Urea,Sulphacetamide,Proflavine , Oint Heparin , Inj Zolendronic Acid 4 Mg , Tab Formalin , Eto Indicator Tape , Microtome Blade , B.B Silk Size-3/0 (12 Foils/Pkt)(3/8Cir Rcut Needle 26Mm Length 76 Cm),Needle [700615] , B.B Silk With 1/2 Cir Rb/Cutting Needle 30 Mm Length 75 Cm Non Absorbable(Size 2-0, 12 Foils/Pkt),Consumable [700103] , B.B Silk With 1/2 Cir Rb Needle 20 Mm Length At Least 75 Cm Non Absorbable Surgical Suture Usp Size 3-0,(12Foils/Pkt),Needle [700104] , B.B Silk With 1/2 Cir Rb Needle Size:4/0 20 Mm(Length At Least 75 Cm, 12 Foils Per Packet),Needle [700469] , Chromic Catgut Suture(3/8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm(5/0 12 Foils/Pkt)),Sutures [700859] , Chromic Size - 1, (12 Foils/Pkt)(1/2 Cir Rb Needle 40 Mm, Length 76 Cm),Needle [700573] , Chromic Size - 1, 12 Foils/Pkt(1/2 Cir Rb Needle 45 Mm, Length 100 Cm),Needle [700557] , Chromic With 1/2 Cir Rb Needle 40 Mm Length 76 Cm (With Needle) ) Absorbable Surgical Sutures Usp,(Size 1, 12 Foils/Pkt),Surgical Material [987769] , Chromic With 1/2 Cir Rb Needle Absorbable Surgical Suture (12 Foils/Pkt)(40 Mm Length 76 Cm Size:1/0 ,Surgical Material),Consumable [202109009] , Chromic With St Rb Needle (12 Foils/Pkt)(60 Mm Length 76 Cm Size:2/0),Consumable [6450009] , Coated Polyster With 1/2 Cir Green Needle 17 Mm (Curved Reverse Cutting Or Curved Round Body Or Taper Cut) Size:2/0 Length 90Cm(.),Consumable [202212002] , Gloves Latex Autoclavable(8 No (Pair) Made Of Natural Latex Micro Rough Finish For Better Grip),Consumable [Mis59] , Nylon Suture,Macrofilment Spatulated, Micropoint Double Armed Size 10-0(12 Foils/Pkt),Sutures [700870] , Polyamide Size - 1/0, 12 Foils/Pkt(3/8 R Cutting Needle 45 Mm, Length 70 Cm),Needle [700570] , Polyamide Size - 2/0, 12 Foils/Pkt(3/8 R Cutting Needle 45 Mm, Length 70 Cm),Needle [700558] , Polyamide With Cd R Cut Extra Penetrating Needle (12 Foils/Pkt)(Size 4/0),Consumable [987778] , Polyglactin 30 Mm 1/2 Circle Round Body 90 Cm Size 1/0(12 Foils/ Pkt),Consumable [700332] , Polyglactin 40 Mm 1/2 Circle Round Body 90 Cm Size 1(12 Foils/ Pkt),Consumable [700333] , Polyglycolic Acid Absorbable Surgical Suture (12 Foils/Pkt)(1/2 Cir Rb Needle 20 Mm, Length 70 Cm Size -3/0),Needle [700562] , Polyglycolic Acid Absorbable Surgical Suture (12 Foils/Pkt)(1/2 Cir Rb Needle 40 Mm, Length 90 Cm Size -2/0),Needle [700561] , Sutures 6-0, Braided Coated Polyglycolic Acid / Polyglactin 910, Violet Absorbable Surgical Suture With Needle,1/4Th Micropoint Spatula 8Mm Double Arm(12 Foils/Packet),Sutures [202211187] , Chromic Catgut Suture (12 Foils/Pkt)(3/8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm Size 4/0),Needle [700612] , Poly Propylene Monofilament Sterile Precut With 1/2 Cir Rb Needle 30Mm Length 70Cm Non Absorbable Surgical Sutures Usp Size 2/0(Size:2/0 (12 Foils/Pkt)),Consumable [987776] , Poly Propylene Monofilament Sterile Precut With 1/2 Cir Rb Needle 30Mm Length 70Cm Size : 1/0(12 Foils/Pkt),Consumable [700265] , Poly Propylene Monofilament Sterile Precut With 1/2 Cir Rb Needle 40 Mm Length 70 Cm Size 1(12 Foils/Pkt),Needle [700329] , Chromic (12 Foils/Pkt)(3/8 Rb Needle 30 Mm, Length 76 Cm, Size - 2/0),Needle [700560] , Chromic Size - 1/0 (12 Foils/Pkt)(3/8 Cir Rb Needle 40 Mm, Suture Length 76 Cm),Needle [700572] , Chromic With 1/2 Cir Rb Needle 30 Mm Length 76Cm, 2-0 Usp, Absorbable Surgical Suture Surgical Material(12 Foils/Box),Surgical Material [987766] , Chromic With Cd Rb Needle 30 Mm Length 76 Cm Size:2/0(Absorbable Surgical Suture Surgical Usp, 12 Foils/Boxmaterial),Surgical Material [987770] , Turp Loop, Double Lumen Stem, Cutting Loop, Angled, 24 Fr. , Poly Propylene Mesh(15 X 15 Cm), Consumable [700330] , Poly Propylene Mesh (7.5 Cm X 15Cm), Consumable [987906] , Disposable Spinal Needle(23 No),Each [700128] , Spinal (L.P.) Needle Disposable(24G),Consumable [987783] , Spinal Needle(24 G),Consumable [700417] , Spinal Needle 26 G(Each),Needle [700484] , Ffr Catheter(Model- Comet Ii Pressure Guide Wire),Consumable [202309002] , Hip Joint Procedure Cooled Rf Kit - 100Mm Probe Length,(With 4Mm Active Tip),Consumable [202401020] , Ivus Catheter(Model- Opticross Hd (60 Mhz)),Consumable [202309001] , Knee Procedure Cooled Rf Kit - 75Mm Probe Length,(With 4Mm Active Tip),Consumable [202401018] , Laparoscopic Surgery Instruments:- 5 Mm Lap Hand Activated Curved Coagulating Shears Capable Of Sealing Blood Vessels Upto 7 Mm In Diameter With Ultrasonic Technology,(36 Cm And 45 Cm Shaft Length, Ergonomic Handle. ),Consumable [202402031] , Laparoscopic Surgery Instruments:- Articulating Rf Probe(35 Cm),Consumable [202402032] , Open Surgery Instruments:-17 Cm Shaft, Curved, Tapered Tip For Precise Dissection, Seals 5 Mm Vessels,(As Well As Lymphatic With16 Mm Active Blade & 240-Degree Activation, Triggers Support Multiple Hand Positions. ),Consumable [202402026] , Open Surgery Instruments:- 5Mm Diameter, 20Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting, Sealing, Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter,(With An Integrated Hand Piece And T),Consumable [202402030] , Open Surgery Instruments:-5 Mm Hand Activated Curved Coagulating Shears Capable Of Sealing Blood Vessels Upto 5Mm In Diameter,(23 Cm Shaft Length, Ergonomic Handle.),Consumable [202402027] , Open Surgery Instruments:- 9Cm Shaft, Curved, Tapered Tip For Precise Dissection, Seals 5 Mm Vessels,(As Well As Lymphatic With 16 Mm Active Blade & 240-Degree Activation, Triggers Support Multiple Hand Positions),Consumable [202402025] , Open Surgery Instruments:- Curved Blade Having Telescoping Shaft (10Cm-14Cm)(With Integrated Hand Activation Control Buttons),Consumable [202402028] , Open Surgery Instruments:-Dissecting Hook Having Telescoping Shaft (10Cm-14Cm)(With Integrated Hand Activation Control Buttons),Consumable [202402029] , Pull Back Sledge(Model- Sterile Pulback Sled),Consumable [202309003] , Reusable Co2 Fiber(Can Be Used With Flexible Endoscopy, For Use In Tumor Surgery In The Larynx, Pharynx, Nasal And Oral Structures And Specially For Use In Stenosis & Juvenile Papillomatosis),Consumable [202403002] , Rf Grounding(Pad),Consumable [202401011] , Si Procedure Cooled Rf Kit - 150Mm Probe Length,(With 4Mm Active Tip),Consumable [202401019] , Standard Rf Cannula Supporting 100Mm Length, 10Mm Active Tip,(20 Gauge),Consumable [202401015] , Standard Rf Cannula Supporting 100Mm Length, 5Mm Active Tip,(21 Gauge),Consumable [202401014] , Standard Rf Cannula Supporting 145Mm Length, 10Mm Active Tip,(20 Gauge),Consumable [202401017] , Standard Rf Cannula Supporting 145Mm Length, 5Mm Active Tip,(20 Gauge),Consumable [202401016] , Standard Rf Probe 100Mm Length,(20 Gauge, Reusable),Consumable [202401012] , Standard Rf Probe 145Mm Length,(20 Gauge, Reusable),Consumable [202401013] , Transducer Of Laproscopic(Handpiece ),Consumable [202402033] , Peripheral Inserted Central Catheter(4 Fr),Consumable [202203008] , Peripheral Inserted Central Catheter(5 Fr),Consumable [202203009] , Nasal Mask With Compatible Interface(Medium Size),Consumable [202402008] , Nasal Mask With Compatible Interface(Small Size),Consumable [202402007] , Reusable Tubes(For Bubble C-Pap),Consumable [202402009] , Airway, Oropharyngeal Guedel, Set With Size Of: No. 3(80 Mm),Consumable [2020765] , Airway, Oropharyngeal Guedel, Set With Size Of: No. 4(90 Mm),Consumable [2020766] , Blood Transfusion Set(Pediatric),Consumable [20201061] , Intravenous Set With Airway And Needle((Adult)),Surgical Material [6450089] , Non-Rebreathing Mask(Oxygen Mask With Reservoir Bag),Consumable [2020772] , Paediatric Drip Set(Set),Consumable [700116] , Urinary Drainage Bag Cap With Non Return Valve (Eo Sterile)(2 Litre, Each),Consumable [700876] , Heated Breathing Circuit(For Hfnc),Consumable [202302001] , Humidifier Chamber(For Hfnc),Consumable [202302002] , Personal Protective Suite With Tape Over Seam And Kit(As Per Attached Specification),Consumable [202102200] , Adult - Double Lumen Catheter Set(Size: 11.5 Fr-12 Fr, 13Cm To 15Cm (Curved)), Consumable [700824] , Adult - Double Lumen Catheter Set(Size: 11.5 Fr-12 Fr, 13Cm To 15Cm (Straight)), Consumable [700823] , A V Fistula Sterilized Twin Needle(17 G (Two Needle Pack)),Consumable [700786] , Central Venous Catheter Kit(Single Lumen),Kit [700210] , Femoral Catheters Double Lumen Kit Curved Double Lumen Catheter Set(12 F (Curved) Adult),Consumable [700228] , Fistula Sterilized Twin Needle(16 G (Two Needle Pack)),Consumable [700785] , Pressure Monitor(Line),Each [201280] , Triple Lumen Jugular Catheter Kit,(Size 12F, 16+/- 1Cm, Kit),Consumable [700869] , Foldable Iol Sterile Lens Pc+14D(Lens-2),Pc+16D(Lens-3),Pc+18D(Lens-5),Pc+19D(Lens-5),Pc+19.5D(Lens-5),Pc+20D(Lens-15),Pc+20.5(Lens-15),Pc+21D(Lens-13),Pc+21.5D(Lens-11),Pc+22D(Lens-11),Pc+22.5D(Lens-5),Pc+23D(Lens-5),Pc+24D(Lens-3),Pc+26D(Lens-2)((One Box Should Contain 100 Pieces As Per Specification Of Power Given),Lens(Attached Specification (100 Lens Per Box)),Consumable [Mis55] , Non Foldable Iol Sterile Lens Pc+14D (2),Pc+16D (3),Pc+18D (5),Pc+19D (5),Pc+19.5D (5),Pc+20D (15),Pc+20.5D (15),Pc+21D (13),Pc+21.5D (10),Pc+22D (10),Pc+22.5D (5),Pc+23D (5),Pc+24D (3),Pc+26D (2),Ac+19D(2)(Box),Lens [700427] , Adhesive Plasters Usp(7.5 Cm X 5 Mts/Roll),Consumable [6550014] , Adhesive Tape 7.5Cm X10(Mtr/Roll),Consumable [700446] , Sterile Disposable/Hypodermic Syringe For Single Use(5Ml (With Needle) :Is 10258 :2002 Marked),Consumable [Mis118] , Sterile Disposable/Hypodermic Syringe(Is 10258:2002 With Needle 10Ml),Consumable [Mis119] , Sterile Disposable/Hypodermic Syringe With Needle For Single Use(1Ml :Is10258),Consumable [Mis121] , Sterile Disposable/Hypodermic Syringe With Needle For Single Use(2Ml :Is10258 Marked:),Consumable [Mis122] , Disposable Syringe(50 Ml),Syrings [Mis44] , Baby Diapers Small(10 Diaper Per Pkt),Consumable [700431] , Adhesive Elastic Tape , Gutta Percha (Gp) With Universal Hand Files For Rtc(As Per Attached Specification),Kit [202209095] , Light Cure Composite(As Per Attached Specification),Kit [202209094] , Feeding Tube (Catheter)(10 G, Each),Consumable [700403] , Folys Catheter(Size 16 Plain),Consumable [202110007] , Infant Feeding Tube(10 G Each Piece, Each),Consumable [700748] , Infant Feeding Tube(7G Each Piece, Each),Consumable [7007481] , Infant Feeding Tube (Catheter) Size: 3G(No.),Consumable [700438] , Infant Feeding Tube (Catheter)(Size: 4G),Consumable [20200725] , Infant Feeding Tube((Catheter) Size: 5G),Consumable [6760003] , Infant Feeding Tube (Catheter) Size: 8G(Each),Consumable [987830] , Infant Feeding Tube(Size: 6G),Consumable [20200726] , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 16- 2 Way Each),Consumable [700851] , Nasal Prong((Each) (Adult)),Consumable [987746] , Nasal Prong Each,Consumable(Neonatal Size 01),Consumable [201397] , Nasal Prong Each,Consumable(Neonatal Size 02),Consumable [201398] , Suction Catheter Assorted(10 No/Each),Consumable [700441] , Suction Catheter Assorted 9 No/Each(Each),Consumable [700440] , Suction Catheter, Sterile(Size Fg 20 (Disposable, Sterile Each)),Consumable [700744] , Suction Catheter, Sterile(Size Fg 22 (Disposable, Sterile Each)),Consumable [700745] , Suction Catheter, Sterile(Size Fg 6 (Disposable, Sterile Each)),Consumable [700746] , Urinary Drainage Bag (Paediatric)(100 Ml / Pc, Each),Consumable [700567] , Collagen Sheets(10 X 10 Cm Sheet),Sheet [4390002] , Self Inflatable Bag With Mask /Adult Each 1000-1700Ml, With Oxygen Connecting Tube ,Should Be Supplied With A Carry Pouch, Should Be Complete With Required Autoclavable Valves And Other Accessories(Should Have Silicon Rubber Bellow To Withstand Autoclave At 134 Degree C) Should Be Multiple Times Autoclavable),Consumable [202308014] , Disposable Pricking Lancet (Pkt Of 200 Units)(Packet),Consumable [6120004] , Surgical Blade Isi Marked, Size 15(100 Per Packet),Surgical Material [Mis123] , Surgical Blade Isi Marked, Size 22(100/Pkt),Surgical Material [Mis124] , Surgical Blade Isi Marked, Size 23(100/Pkt),Surgical Material [Mis125] , Surgical Blade Isi Marked, Size 24(100/Pkt),Surgical Material [Mis126] , Leukoreduction Filter((Bed Side) Post Storage),Consumable [20250902] , Absorbent Bench Underpads (Absorbancy 340Ml),Consumable [20210204] , Disposable Kelly Pad Fabric: Non-Woven, Layered; Spunbound-Meltblown-Spunbound (Sms), Dimensions: Drape: L 76 Cm; W 77 Cm .Drain Pouch: L 38 Cm; W 38 Cm. Drain Tube: L 25 Cm; W 3 Cm,Fenestration Area: Reinforcement(Of Polycoated Fabric,Adsorbent On One Side And Impervious To Fluids On Another Side,With Drain Pouch And Drainage Tube,Packing: Sterile Pack; Double Packed With Outer Pouch Must Be Peel Off Made Of Medical Grade Paper),Consumable [20200748] , X- Ray Developer (22.5 Ltr.) Pkt , X- Ray Film Fixer(22.5 Ltr.) Pkt , Hub Cutter Non Electric Lockable Safety Portable Box For Disposal Of Hypodermic Needles(Cuts The Needle From The Hub Of Machine),Each [700828] , I.V Canulafixater(Transperent Material For Fixation Of I.V. Cannula),Consumable [20200724] , Kellys Pad( Rubber/Each),Consumable [700420] , Plastic Disposable(Shoe Cover),Consumable [202301004] , Synthetic, Monofilament, Nonabsorbable Polyprolene Mesh 7.5 X 15 Cm( Each),Consumable [202212001] , Disposable Sterile Gloves Bis Specification Gloves, Surgical Rubber,Made Of Hypoallergic Latex 100%,Electronically Tested Sterilized By Gamma Irradiatio Eto Is No:13422:1992 As Amended Upto , 7Inch/Pair(Pair),Consumable [6281066] , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized By Gamma Irradiation / Eto Is No : 13422:1992 As Amended Upto, 6 Inch / Pair(Pair),Surgical Material [6281063] , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized By Gamma Irradiation / Eto Is No : 13422:1992,As Amended Upto, 7.5 Inch / Pair(Pair),Consumable [700166] , Disposable Needles Is 10654:2002 (26 G (1 1/2 Inch)),Consumable [202110002] , Disposable Needles Is 10654:2002 (26 G (1 Inch)),Consumable [202110003] , Disposable Syringe With Needle(1Ml Each),Syrings [20201062] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I And B,Flow Wrap/ Blister Pkg Using Medical Grade Breathable Paper, Eto Sterilized(10Ml),Consumable [20200741] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I And B,Flow Wrap/ Blister Pkg Using Medical Grade Breathable Paper, Eto Sterilized(3Ml),Consumable [987824] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I,B, Flow Wrap/Blister Pack Using Medical Grade Breathable Paper, Eto Sterilized(5Ml),Syrings [700023] , Sterile Disposable Insulin Syringe With 31G Needle((Single Unit Pack) Is Marked, 100Iu),Syrings [202211182] , Sterile Disposable Insulin Syringe With 31G Needle((Single Unit Pack) Is Marked, 40 Iu),Syrings [202211180] , I.V Cannula Size With Injection Valve (Port)(18G),Consumable [700271] , I.V Cannula Size With Inj. Valve (Port)(22G),Consumable [121203] , I.V. Cannula With Injection Valve(20G),Consumable [700173] , Iv Cannula With Inj.Valve (Port)(Size 26G Each Consumable),Consumable [121126] , I.V Cannula For Single Use (Intravascular Catheters) Bis (Gauze 22,Length 25) Consumable(Each),Consumable [121201] , I.V. Cannula With Injection Valve(Size 24 G),Consumable [700179] , Disposable(Cap),Consumable [6940001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 6 Inch/Pair(Pair),Consumable [13001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7.5 Inch/Pair(Pair),Consumable [13004] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7 Inch/Pair(Pair),Consumable [13003] , Disposable Under Pad- Dimention Of Sheet 60*90 Cm(Inside)(Weight 80 Gm Unit),Consumable [121208] , Elbow Length Latex Gloves(Large),Consumable [Mis48] , Elbow Length Latex Gloves(Medium),Consumable [Mis49] , Elbow Length Latex Gloves(Small),Consumable [Mis50] , Utility Gloves(Large),Consumable [Mis161] , Utility Gloves(Medium),Consumable [Mis162] , Disposable Needle 20-G-No(Isi Marked Needle),Consumable [121114] , Disposable Syringe {Auto Disabled (Ad)/Re-Use Prevantion(Rup) Syringe}((For Vitamin K Inj)(1Ml With Needle 26G)),Consumable [121134] , Simcoe I/A Cannula,Direct,(Num),Consumable [Mis110] , Sterile Disposable Insulin Syringe Each (Graduation Upto 100 Units) 30G Needle(40 Units/Ml (30 G Needle, 40Units/Ml)),Syrings [202211181] , Adhesive Plasters Usp(7.5 Cm X 5 Mts/Roll),Consumable [6550014] , Cloth Based Surgical Adhesive Tape Roll(6 Inch X 10M / Roll),Consumable [Mis28] , Latex Examination Gloves (Medium)(100/Pkt)(Packet),Consumable [700555] , Latex Examination Gloves (Small) (100/Pkt)(Packet),Consumable [700556] , Paper Adhesive Microporous Surgical Tape 3 Inch X 5 M / Roll (10 Roll/Pkt)(3 Inch X 5 M / Roll (10 Roll/Pkt)),Consumable [700481] , Paper Adhesive Plaster Microporous Surgical Tape 1 Inch X 9 M / Roll(1 Inch * 9 M/Roll (Iso 13485:2016)),Consumable [700122] , Paper Adhesive Plaster Microporous Surgical Tape(2 Inch X 5M /Roll),Consumable [700124] , Paper Adhesive Plaster Microporous Surgical Tape(4 Inch X 9 M / Roll (Iso 13485:2016)),Consumable [700123] , Paper Adhesive Plaster Microporous Surgical Tape(6 Inch X 5M /Roll),Consumable [700125] , Absorbent Cotton Wool Ip 500 Grms (Each) Roll(Iso:13485:2016),Consumable [6550030] , Radio Opague Catheter With Ptfe/Polyurethine/Fep/Volex Material(Iv Safety Cannula With Luer Lock (G-22)),Consumable [121129] , Radio Opaque Catheter With Ptfe/Polyurethine/Fep/Volex Material(Iv Safety Cannula With Luer Lock (G-18)),Consumable [121127] , Radio Opaque Catheter With Ptfe/Polyurethine/Fep/Volex Material(Iv Safety Cannula With Luer Lock (G-20)),Consumable [121128] , Three Way Conector(100 Mm Extention),Consumable [20201108] , Neonatal(Probe),Consumable [202407004] , Disposable Syringe With Needle 10Ml(Each),Consumable [202212003] , Disposable Syringe With Needle(20Ml Each),Syrings [700443] , Disposable Syringe With Needle(3Ml Each),Syrings [700421] , Cuff For Adult(Size Lenght 22-42/45Cm And Width Minimum 12Cm),Consumable [202401005] , Cuff For Pediatric(Size Lenght 12-22Cm),Consumable [202401006] , Gauze Sponge/Each(Size 3 X 3 Inches),Consumable [202301005] , Flow Meter With Humidifier Bottle(As Per Attached Specification),Consumable [2020760] , Laryngeal Mask Airway (Lma)(No. 3),Consumable [2020767] , Laryngeal Mask Airway (Lma)(No. 4),Consumable [2020768] , Ventury Mask, With Percent O2 Lock + Minimum 2.0 M Tubing Size Adult(As Per Attached Specification),Consumable [2020764] , Umbical Cord Clamps(Plastic Material),Consumable [700322] , Skin Closure Stapler (35 Pins High Quality Medical Grade Plastic,Cartridge With Ss Rectangular Design Pins With Wire Diameter 0.60 Mm And Size After Closure( 7.2 X 4.3 Mm),Consumable [700266] , Titanium Adapter(Each),Consumable [202106005] , Transfer Set (Each),Consumable [202106006] , Absorbent Cotton Wool Ip 500 Grms (Each) Roll(Iso:13485:2016),Consumable [6550030] , Cannula Fixer Set(Piece),Each [700602] , Syringe With Luer Lock Technology(10 Ml Syringe),Syrings [202203011] , Syringe With Luer Lock Technology(5 Ml Syringe),Syrings [202203012] , Disposable Drape For Eye Surgery(Each),Consumable [202206003] , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(100 Ml),Bag [700675] , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(350 Ml),Bag [700676] , Close Wound Drainage Device Under Negative Pressure(Closed Wound Suction Unit) Size 200 Ml(Catheter Size 16, Each),Consumable [700568] , Close Wound Drainage Device Under Negative Pressure(Closed Wound Suction Unit) Size 200 Ml(Catheter Size 18, Each),Consumable [700569] , Double Lumen Polyurethane Cvp Catheter 4 To 5 Fr(Length 8 To 13 Cm,),Consumable [700865] , Endotracheal Tube No 5.5(Uncuffed),Each [201278] , I.V Cannula (Two Way) Size(16 Nos),Consumable [121202] , Iv Cannula With Inj Valve(16G),Consumable [Mis163] , Paclitaxal Administration(I.V Set),Consumable [202011052] , Triple Lumen Polyurethane Cvp Catheter 7 To 7.5Fr(G-14-16X18x18, Length 16-20 Cm, Each),Consumable [700867] , Triple Lumen Polyurethane Cvp Catheter 7 To 7.5 Fr(G-14-16X18x18x18, Length 15-16Cm, Each),Consumable [700866] , Triway Cannula(3 Way Stop Cock),Consumable [700180] , Abdominal Belt(32 Inch Each),Consumable [700537] , Abdominal Belt(34 Inch Each),Consumable [700680] , Abdominal Belt(36 Inch Each),Consumable [700677] , Abdominal Belt(38 Inch Each),Consumable [700679] , Non-Latex Purple Nitrile Gloves (As Per Attached Specification)(Large),Consumable [20200761] , Non-Latex Purple Nitrile Gloves (As Per Attached Specification)(Medium),Consumable [20200760] , Endotracheal Tube No 6.0(Uncuffed),Each [201279] , Endotracheal Tube,Soft Cuff Towards The Distal End Kink Resistant Inflation Tube Murphy Eye At Distal End With Polished Smoothness Standard 15 Mm Connector Sterile, Single Use Curved Shaped Blister Pack-Suiting The Shape Of Product(Size 3),Tube [700614] , Endotracheal Tube, Soft Cuff Towards The Distal End Kink Resistant Inflation Tube Murphy Eye At Distal End With Polished Smoothness Standard 15 Mm Connector Sterile, Single Use Curved Shaped Blister Pack-Suiting The Shape Of Product(Size 4 , Each),Tube [700613] , Endotracheal Tubes Size 9.5 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Line(Size 9.5 , Each),Consumable [700873] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I,B,Flow Wrap/ Blister Pack Using Medical Grade Breathable Paper, Eto Sterilized(2Ml),Consumable [20200740] , Blood Transfusion Set(Adult),Consumable [201396] , Disposable Scalp Vein Set(Size 20 No),Consumable [700114] , Disposable Scalp Vein Set Size 22 No(Each),Consumable [700115] , Disposable Suction Catheter(Size 12),Consumable [700113] , Disposable Suction Catheter(Size 14),Consumable [700112] , Endotracheal Tube No(2.5(Uncuffed)),Tube [20201060] , Endotracheal Tube No(3.5(Uncuffed)),Tube [202011003] , Endotracheal Tube No 3(Uncuffed),Consumable [202011005] , Endotracheal Tube No(4.0(Uncuffed)),Tube [202011004] , Endotracheal Tube No 4.5(Uncuffed),Tube [202011002] , Endotracheal Tube No 5.0(Uncuffed),Tube [202011001] , Intravenous Set With Airway And Needle (Children)(Surgical Material),Consumable [202011041] , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 18- 2 Way, Each),Consumable [700850] , Micro Volume(Drip Set),Digonstic [6600001] , Ryles Tube (Pvc) Size : Adult: 16(Each),Consumable [987829] , Ryles Tube (Pvc) Size : Adult(18, Each),Tube [700110] , Ryles Tube (Pvc) Size( Children: 10),Consumable [987828] , Ryles Tube (Pvc) Size(Children : 12),Tube [700111] , Ryles Tube(Size 14 Each Piece),Consumable [700750] , Scalp Vein Set(Size 24G, Disposable , Each),Consumable [700893] , Latex Examination Gloves (Large) (100/Pkt)(Packet),Consumable [700554] , Disposable Syringe With Needle(2Ml Each),Syrings [700422] , Disposable Syringe With Needle(5Ml Each),Needle [700437] , Hard Cervical Collar(Large),Consumable [202308008] , Hard Cervical Collar(Small),Consumable [202308009] , Pelvic Binder(Large),Consumable [202308010] , Pelvic Binder(Medium),Consumable [202308011] , Pelvic Binder(Small),Consumable [202308012] , Splints(Long Arm Splint),Consumable [202308001] , Splints(Long Leg Thomas Splint),Consumable [202308003] , Splints(Short Arm Splint),Consumable [202308002] , Splints(Short Leg Thomas Splint),Consumable [202308004] , Phaco(Handpiece),Consumable [202303019] , Reusable Autoclavable Phaco Tip(Size 2.2 Mm With 30 Degree Tips),Consumable [202303017] , Reusable Autoclavable(Tubing),Consumable [202303016] , Reusable Phaco(Sleve),Consumable [202303018] , Bcg(1 Ml Each),Syrings [700840] , Foleys Urinary Catheter 2 Way(Size 22 Each),Consumable [700743] , Follyscathator(Pediatrics),Consumable [202110006] , Follyscathetor 10 No(Pediatrics),Consumable [201282] , Follyscathetor 8 No(Pediatrics ),Consumable [201281] , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 14- 2 Way Each),Consumable [700849] , Latex Based Baloon (Capacity 30-50 Ml) Foleys Urinary Catheter(3 Way Size 20),Consumable [700874] , Latex Based Baloon Capacity (3Ml) Foleys Urinary Catheter Peadiatrics(2 Way Size 8, Each),Consumable [700852] , Latex Based Baloon Capacity (3Ml) Foleys Urinary Catheter Peadiatrics(Size 10 , Each),Consumable [700853] , Mva Kit (Mannual Vaccum Aspiration Kit)(As Per Attached Specification),Consumable [700890] , Wound Suction Catheter(No 18),Each [700148] , Airway, Nasopharyngeal, Sterile, Single Use, Set With 7.5 Mm(External Diameter),Consumable [202208029] , Hme Filter(As Per Specification),Each [20200503] , I.V Canulafixater(Transperent Material For Fixation Of I.V. Cannula),Consumable [20200724] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 4 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant),Tube [700565] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 5 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant),Tube [700566] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 7 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each),Tube [700563] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 8 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each),Tube [700564] , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized By Gamma Irradiation / Eto Is No : 13422:1992 As Amended Upto, 6.5 Inch / Pair(Pair),Consumable [700164] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 6 Inch/Pair(Pair),Consumable [13001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7.5 Inch/Pair(Pair),Consumable [13004] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7 Inch/Pair(Pair),Consumable [13003] , Femoral Catheters Single Lumen Set Adult(Size - 6F To 8F, Length 13 Cm To 15 Cm, Each),Consumable [700811] , Femoral Guide Wires : Straight/J Tip((0.325 Mm Size) Sterile: Ce/Iso13485 Marked),Consumable [700825] , Paediatric Epidural Set(19G Needle, Metal Stylet,22G Catheter,0.22Micron Epidural Catheter Lor Syringe)( ),Consumable [700456] , Spinal Needle(G-22 L-120 Mm),Consumable [700868] , Spectacles For Old Person(Bifocal),Consumable [202210002] , Spectacles For Old Person(Black Safety Goggles),Consumable [202210003] , Spectacles For Old Person(Presbyopia),Consumable [202210001] , Spectacles For School(Children),Consumable [202210004] , Disposable(24-G Each),Needle [700841] , Disposable Needles(Is 10654:2002 22G),Surgical Material [6451076] , Disposable Needles Is 10654:2002(23G),Needle [700843] , Disposable Needles Is(10654:2002 26 G),Needle [700394] , Hypodermic Needles For Single Use Bis Gauze(23 Length, 25 Mm +-1),Needle [700839] , Needle Hypodermic Size Is(10654:2002 23G),Needle [700174] , Needle Hypodermic Size Is(10654:2002 24G),Consumable [987786] , Epidural Set(20 N0.),Consumable [202012041] , Exchange Transfusion Catheter With Four Way Adaptor(Size- 4 Cm, L-40 Cm),Consumable [Mis52] , Hickman Catheter Single Lumen(4.2 Fr),Consumable [202203007] , Hickman Catheter Single Lumen(6.6 Fr),Consumable [202203006] , Long Line Silicon Catheter(G-24, Fr-2, L-30Cm),Consumable [Mis76] , Short Iv Catheter With Straight/J Tip Guidewire(L-20, Fr-2, G-22),Consumable [Mis108] , Short Iv Catheter With Straight/J Tip Guidewire(L-4, Fr-2, G-22),Consumable [Mis109] , Single Umbilical Catheter With Leur Lock(Fr-2 To Fr 2.5, L-40 Cm),Consumable [Mis111] , Single Umbilical Catheter With Leur Lock(Fr-3 To Fr 3.5 , L-40 Cm),Consumable [Mis112] , Single Umbilical Catheter With Luer Lock Stopcock(Fr-4, L-40 Cm),Consumable [Mis113] , Single Umbilical Catheter With Luer Lock Stopcock(Fr-5, L-40 Cm),Consumable [Mis114] , Plaster Of Paris Bandage 10 Cm X 2.7 Mtr / Roll(Roll),Bandage [700226] , Plaster Of Paris Bandage 15Cm X 2.7Mtr / Roll(Roll),Bandage [6030008] , Disposable Drape For Eye Surgery(Each),Consumable [202206003] , Abdominal Belt(32 Inch Each),Consumable [700537] , Abdominal Belt(34 Inch Each),Consumable [700680] , Abdominal Belt(36 Inch Each),Consumable [700677] , Abdominal Belt(38 Inch Each),Consumable [700679] , Blood Transfusion Set(Pediatric),Consumable [20201061] , Paediatric Drip Set(Set),Consumable [700116] , Endotracheal Tube No 5.0(Uncuffed),Tube [202011001] , Colostomy Bag , Collagen Dressing , Illeostomy Bag , Gigli Wire , Merocel (Standard Nasal Dressing) , Pigtail Catheter 8 , Pigtail Catheter With Needle No 10 , Pigtail Catheter With Needle No 12 , Pigtail Catheter With Needle No 14 , Pigtail Catheter With Needle No 16 , Pigtail Catheter With Needle No 18 , Pigtail Catheter With Needle 20 , Intercostal Chest Tube(Ictd) 24 No. , Icd Drain Bag Under Water Drain With Trochar , Chest Trochar With Cannula 22 No. , Chest Trochar With Cannula 28 No. , Chest Trochar With Cannula 30 No. , Chest Trochar With Cannula 32 No. , Romovac Suction Minivac Set Size No 08 , Romovac Suction Minivac Set Size No 10 , Romovac Suction Minivac Set Size 12 , Romovac Suction Minivac Set Size 16 , Romovac Suction Minivac Set Size 18 , Pvc Corrugated Drain , Epidural Set 16 Gauze , Epidural Set 18 Gauze , Epidural Catheter 16 Gauze , Epidural Catheter 18 Gauze , Pediatric Epidural Set 22 Gauze , Pediatric Epidural Set 24 Gauze , Nerve Stimulator Needle 05Cm , Nerve Stimulator Needle 10Cm , Central Venous Catheter (Double Lumen)/(Triple Lumen) , Flexometallic Endotracheal Tube No.5.0 , Flexometallic Endotracheal Tube No. 5.5 , Flexometallic Endotracheal Tube No. 6.0 , Flexometallic Endotracheal Tube No.6.5 , Flexometallic Endotracheal Tube No.7.0 , Flexometallic Endotracheal Tube No.7.5 , Pvc Endotracheal Tube Cuffed No. 5.0 , Pvc Endotracheal Tube Cuffed No. 5.5 , Pvc Endotracheal Tube Cuffed No. 6.0 , Pvc Endotracheal Tube Cuffed No. 6.5 , Pvc Endotracheal Tube Cuffed No. 7.0 , Pvc Endotracheal Tube Cuffed No. 7.5 , Pvc Endotracheal Tube Cuffed No. 8.0 , Spinal Needle 25 Gauze , Spinal Needle 27 Gauze , Ecg Electrode , Dynaplast 15Cm , Povidone Iodine Scrub 7.5% 500 Ml , Surgical Blade 11 No , Soft Cotton Roll 10 Cm , Soft Cotton Roll 15 Cm , Plaster Of Paris Powder , Intravenous Set (Adult) , Adult Diaper , 3-Way Foleys Catheter Size 18,20.22 , Metal Loops , Nichrome Wire Loop , Nichrome Wire Loop 0.5 , Nichrome Wire Loop 1 , Nichrome Wire Loop 2 , Nichrome Wire Loop Straight Wire , Magnetic Stirring Bars , Magnetic Rotors Oval Shape Bars , Magnetic Stirring Bar Retrievers , Blood Transfusion Set(Adult),Consumable [201396] , Follyscathator(Pediatrics),Consumable [202110006] , Folys Catheter(Size 16 Plain),Consumable [202110007] , Suction Catheter Assorted 9 No/Each(Each),Consumable [700440] , Disposable Surgeon Cap With Cable Tie(Each),Consumable [202206004] , Endotracheal Tube No(2.5(Uncuffed)),Tube [20201060] , Endotracheal Tube No(3.5(Uncuffed)),Tube [202011003] , Endotracheal Tube No 3(Uncuffed),Consumable [202011005] , Endotracheal Tube No(4.0(Uncuffed)),Tube [202011004] , Endotracheal Tube No 4.5(Uncuffed),Tube [202011002] , Umbical Cord Clamps(Plastic Material),Consumable [700322] , Disposable Spinal (L.P.) Needle(25G),Surgical Material [6451074] , Disposable Spinal Needle(22 No),Each [700130] , Electric Cautery Lead/Each-Disposable Electro Surgical Pencil-4Cm(Each),Each [120864] , Endotracheal Tube Internal With Radioopaque Line(Dia 2.5 Mm To 5 Mm, Each),Consumable [700872] , Hmef, Filter, Heat And Moisture Exchanger With Viral Filter (Hmef), High Efficiency(With Connectors,Single Use Certification Required For Viral Filtration),Consumable [2020761] , Mask Oxygen With Connection Tube, Reservoir Bag And Valve, High Concentartion(Adult),Consumable [202204018] , Mask Oxygen With Connection Tube, Reservoir Bag And Valve, High Concentartion, Paediatric/ Non-Rebreathing Mask(Oxygen Mask With Reservoir Bag),Consumable [202204019] , Nasal Prong(Adult),Consumable [2020771] , Nasal Prong Each,Consumable(Infant),Consumable [201399] , Nasal Prong Each,Consumable(Pediatric),Consumable [201400] , Non-Invasive Masks For Niv Therapy Large Size(As Per Attached Specification),Consumable [2020763] , Non-Invasive Masks For Niv Therapy Medium Size( As Per Attached Specification),Consumable [2020762] , Oropharyngeal Airway,(Size 1),Consumable [202208023] , Oropharyngeal Airway,(Size 2),Consumable [202208024] , Oropharyngeal Airway,(Size 5),Consumable [202208025] , Polyethylene High Pressure Extension Tube(Length - 150Cm),Consumable [Mis94] , Silicon Mask Adult Size 3 With Connection Tube, Reservoir Bag And Valve, High-Concentration, Adult(Bains Circuit),Consumable [202208026] , Silicon Mask Adult Size 4 With Connection Tube, Reservoir Bag And Valve, High-Concentration, Adult(Bains Circuit),Consumable [202208027] , Silicon Mask Size 0 Paediatric With Connection Tube, Reservoir Bag And Valve, High-Concentration, Paediatric(Jackson Rees Circuit),Consumable [2020769] , Silicon Mask Size 1 Paediatric With Connection Tube, Reservoir Bag And Valve, High-Concentration, Paediatric(Jackson Rees Circuit),Consumable [2020770] , Cloth Based Surgical Adhesive Tape Roll(1 Inch X 5 Mtr / Roll),Consumable [700887] , Cervical Collar/Each-Soft,(Medium Sized),Consumable [700430] , Compatible Filter Tips For M/S Sartorius Make Multi Channel Pipette (8 Channel) 10 Microliter - 100 Microliter:(1 Box Of 10 Packs),Consumable [202401025] , Compatible Filter Tips For M/S Sartorius Make Multi Channel Pipette (8 Channel) 30 Microliter - 300 Microliter:(1 Box Of 10 Packs),Consumable [202401026] , Compatible Filter Tips For M/S Sartorius Make Multi Channel Pipette (8 Channel) 5 Microliter - 50 Microliter:(1 Box Of 10 Packs),Consumable [202401024] , Bss (Balance Salt Solution ) 500 Ml. Bottle , Alcohol (Absolute)(500 Ml),Consumable [122008] , Bile Esculin Agar(100 Gm),Consumable [121021] , Bile Salt Agar(100 Gm),Consumable [121020] , Blood Agar Powder(500 Grm),Consumable [Mis19] , Carbolic Acid Phenol(500Ml),Consumable [121186] , Cetrimide Agar(100 Gm),Consumable [121022] , Cled Agar(500 Gm),Consumable [121014] , Edta Solutions K3(500 Ml Bottle),Consumable [700752] , Fouchets Reagent(100 Ml Bottle),Consumable [Mis56] , Gram Staining Kit(125Ml X 4),Consumable [800101] , H2so4 (Sulphuric Acid)(25% 500 Ml Bottle),Consumable [700535] , Macconckeys Agar(500Grm),Consumable [Mis77] , Methylated Spirit(500 Ml Bottle),Consumable [121189] , Methyl Blue For (Z N)(125 Ml Bottle),Consumable [Mis80] , Nutrient Agar(500 Grm),Consumable [Mis88] , Nutrient Broth(500 Gm),Consumable [121008] , Phenolic Compound/Phenol Crystal Chemical Name: Phenol, Chemical Structure: C6h5oh, Molecular Wt: 94.11, Melting Point:40 C+2 Purity: 99.5%(500 Gm Glass Bottle),Consumable [121190] , Sabourauds Dextrose Agar Powder(100Gms),Consumable [Mis104] , Absorbable Gelatine Sponge(Ip 80Mm X 50Mm X 10Mm),Consumable [6270001] , Films Of Size 10X12 Inches Compatible Films To Dr System(10X12 Inches),Film [202111003] , Films Of Size 11X14 Inches Compatible Films To Dr System(11X14 Inches),Film [202111002] , Films Of Size 14X17 Inches Compatible Films To Dr System(14X17 Inches),Film [202111001] , Films Of Size 8X10 Inches Compatible Films To Dr System(8X10 Inches),Film [202111004] , Sterile Alcohol(Swabs),Consumable [202203014] , Tourniquet With Belt (Good Quality Pairs)(Each),Consumable [700237] , Covid-19 (Sars-Cov-2)(Specific Rapid Antigen Test Kit),Kit [20210402] , Hiv Kit(Card),Kit [5400014] , Viral Transport Media With Swabs(As Per Attached Specification),Consumable [Mis1005] , Widal Slide Test(4X5ml With Control),Consumable [73001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 6.5 Inch/Pair(Pair),Consumable [13002] , Trypan Blue(0.06% 1 Ml),Solution [140104] , Disposable Sharp Collection Containers(1.5 L),Consumable [700246] , Disposable Sharp Collection Containers(5 Ltr),Consumable [700294] , Disposable Three Layer Surgical Mask(As Per Attached Specification),Mask [700454] , Falcon Tube (Conical Bottom)(50Ml Each Plastic Containers With Air Tight Screw Cap Printed Graduation),Consumable [121187] , Nebulization Mask-Kit(Adult),Mask [700025] , Nebulization Mask - Kit(Pediatrics),Consumable [700323] , Oxygen Mask Adult(Standard Size),Mask [6601029] , Oxygen Mask Paediatric(Standard Size),Mask [4390003] , Plain Vial With Screw Cap (12X75),Consumable [7410047] , Safe Delivery Kit-1 Plastic Desposable Gown (Non Woven Plastic Laminated, Leak Proof)-2(4*4),(2) Disposable Goggles For Protection Of Eyes-2 (Free Size),(3) Face Mask-2 Free Size (4) Plastic Disposable Cap (Non Woven Plastic Laminated,Leak Proof)((-1Pair,(5)Long Gloves Elbow Length-2Pairs(6 1/2 And 7) (6)Disposable Shoe Covers Till Calf (Plastic)-2Pair Umbical Cord Clamps- Plastic Material(1Pair)(Free Size)(As Per Attached Specification))),Consumable [121130] , Screw Cap Vial With O Ring (2Ml),Screw Cap,Leak Proof Self Standing/Flat Bottom With O Ring, Un Graduated,Polypropylene/Polyethylene,2Ml Capacity Each(Each),Consumable [130011] , Sputum Container(100 Per Box),Consumable [121191] , Sterile(Gauze),Consumable [202203013] , Test Tube, Leak Proof, Ungraduated, Polypropylene/Polyethylene Capacity 5Ml Each(Each),Consumable [130010] , Urinary Drainage Bag Cap With Non Return Valve (Eo Sterile)(2 Litre, Each),Consumable [700876] , White Translucent Puncture Proof Container Size(2 Litre),Consumable [202011047] , Anti Hcv Antibody Kits (Elisa)(As Per Attached Specification),Consumable [202012033] , Cotton Crape Bandage(10Cm X 4M),Consumable [987731] , Cotton Crape Bandage(15Cm X 4M),Consumable [987730] , Hcv Kit Card(Test),Digonstic [5400015] , Hiv (Rapid)(Whole Blood Finger Prick Test Kit),Consumable [121198] , Serum Creatinine(100 Ml Bottle (2 X 50 Ml)),Consumable [700735] , Troponin 1 Kit(10 Test Per Pack),Consumable [700550] , Uric Acid(50 Ml(2 X 25 Ml),Consumable [121133] , Blood Urea Reagent Kit(200Ml (2X100ml)),Consumable [Mis20] , Leishman Stain(500 Ml Bottle),Consumable [Mis75] , Rpr Test Kit(100 Test),Kit [Mis103] , Bilirubin Kit (Colorimeter Semi Auto)(4X60 Ml 480 Test/Kit),Consumable [987758] , Cholesterol Kit End Point Enzymatic Kit(5X20ml 200 Test/Kit),Consumable [987759] , Serum Amylase(2X25 Ml),Consumable [20210732] , Triglyceride Kit Enzymetic(5X20ml 200Test/Kit),Consumable [987761] , Calibration Instrument/Rod(Make Thorasys),Consumable [202401010] , Humidification Water Chamber:Consumable [202402001] , Mouth Piece Filter For Fot Consumable [202401009] , Nasal Cannual Prongs-(Extra-Large > 5 Kg),Consumable [202402006] , Nasal Cannual Prongs-(Extra Small < 1 Kg),Consumable [202402002] , Nasal Cannual Prongs-(Large < 2-5 Kg),Consumable [202402005] , Nasal Cannual Prongs-(Small < 1-2 Kg),Consumable [202402003] , Cyphenothrin(5% Ec),Consumable [20210225] , Cr System Cassette Size(10X12),Consumable [202210021] , Cr System Cassette Size(14X17),Consumable [202210022] , Cr System Cassette Size(8X10),Consumable [202210023] , Cr System Film(Size 10X12),Consumable [21100202] , Cr System Film(Size 14X17),Consumable [21100203] , Cr System Film(Size 8X10),Consumable [2110021] , Films Size(10X12 Inches),Consumable [202402035] , Films Size(8X10 Inches),Consumable [202402034] , Black-Braided Silk With 1/2 Cir Cutting Needle 30Mm Length 75 Cm(1/0 12 Foils/Pkt),Consumable [Mis18] , Bone Wax Sterilised(2.5 Gm/Packet)(Consumable),Consumable [121124] , Catgut Chromic With 1/2 Cir Cutting Needle 12Mm(Length 70Cm No.3-0, 12 Foils Per Pakt),Consumable [700458] , Chromic Catgut (12 Foils/Pkt)(Size:1/0 Length At Least 150 Cm),Consumable [987772] , Polyamide Mono Filament (Nylon) With 1/2 Cir Cut Needle 20/16 Mm Length 70 Cm Size 2/0(12 Foils/Pkt),Consumable [121206] , Measure Volume(Drip Set),Each [700117] , Iohexol Injection 350 Mg Iodine/Ml(50 Ml Vial),Injection [202211183] , Bio Medical Waste Bins Blue (15 Liter),Consumable [202011031] , Bio Medical Waste Bins Blue (25 Ltr),Consumable [202011035] , Bio Medical Waste Bins Blue(40 Ltr),Consumable [202011038] , Bio Medical Waste Bins Red(15 Ltr),Consumable [202011034] , Bio Medical Waste Bins Red(25 Ltr),Consumable [202011033] , Bio Medical Waste Bins Red(40 Ltr),Consumable [202011037] , Bio Medical Waste Bins Yellow(15 Liter),Consumable [202011032] , Bio Medical Waste Bins Yellow(25 Ltr),Consumable [202011036] , Bio Medical Waste Bins Yellow(40 Ltr),Consumable [202011039] , Ecg Jelly 250 Gms(Bottle),Jelly [700024] , Echo Jelly 250Ml Bottle(Bottle),Jelly [700199] , Sanitizing Agent(50 Ml),Bottle [202209093] , Electrolyte Concentrate(10 Litre/Pack),Consumable [202208022] , Urine Container Size Of The Container Shall Be 30Ml Disposable(50 Per Pkt),Consumable [7004071] , Usg Gel(250 Ml Bottle),Consumable [700740] , 0.2 Ml Pcr Tube(Sterile, Flat-Cap Shaped),Consumable [20200826] , Acid Fast Staining Kit (Carbol)(125Ml X 3),Consumable [800102] , Columbia Blood Agar Base(500 Gm),Consumable [121013] , Cristensens Urea Agar Base(100 Gm),Consumable [121016] , Diluent For Dna Extraction/ Ethanol, Molecular(Biology Grade 500Ml),Consumable [2020777] , Glucose Phosphate Broth(100 Gm),Consumable [121015] , Imipenem 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121025] , Isopropanol, Molecular(Biology Grade 500Ml),Consumable [20200827] , Muller Hinton Agar(500 Gm),Consumable [121009] , Multipurpose Labelling(Tag),Consumable [2020787] , Nalidixic Acid 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121028] , Para Film Sealing Film, Quantity 510 Roll, Rate Should Be Quoted For Per Roll, Parafilm, 100 Mm Width, 58M Length, Should Withstand At Temprature Between -40Deg C To +50Deg C(100 Mm Width, 58M Length),Consumable [202011049] , Piperacillin 100 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [0121035] , Potassium Permanganate, Powdered(Analytical Grade 500 Gm),Consumable [20200829] , Rnase/ Dnase Away Solution, For Complete Removal Of Rnase/ Dnase Contamination From Work Surfaces, Pipettes And Equipments(Should Be Stable At Room Temperature),Consumable [2020783] , Salmonella Shigella Agar(100 Gm),Consumable [121017] , Selenite F Broth(100Gm Pack),Consumable [121007] , Simmons Citrate Agar(100 Gm),Consumable [121011] , Swab Stick With Tube-Sterile(70-80 Mm Length 10- 15 Mm Diameter), Unit 1(100/Pkt , Packet),Consumable [700685] , Tcbs Agar(100 Gm),Consumable [121019] , Teicoplanin 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121034] , Triple Sugar Iron Agar(100Gm Pack),Consumable [121006] , Test Card For Abg Machine(For Abg M/C),Consumable [202302003] , Therma Col Box For Falcon Tube (Box Size Should Contain Minimum 2 Falcon Tube (9X6x6)(Box Size Should Contain Minimum 2 Falcon Tube (9X6x6)),Consumable [202011097] , Bmw Polybags Blue Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210608] , Bmw Polybags Blue Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210609] , Bmw Polybags Blue Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210607] , Bmw Polybags Red Colour(Sizes 28 Kg (As Per Attached Specification)),Bag [20210612] , Bmw Polybags Red Colour(Sizes 45 Kg (As Per Attached Specification)),Bag [20210613] , Bmw Polybags Red Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210610] , Bmw Polybags Yellow Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210605] , Bmw Polybags Yellow Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210606] , Cr System Cassette For Konica Minolta(Size 10X12),Consumable [202308024] , Cr System Cassette For Konica Minolta(Size 14X17),Consumable [202308023] , Cr System Cassette For Konica Minolta(Size 8X10),Consumable [202308025] , Cr System Film For Konica Minolta Size(Size 10X12),Consumable [202308021] , Cr System Film For Konica Minolta Size(Size 14X17),Consumable [202308020] , Cr System Film For Konica Minolta Size(Size 8X10),Consumable [202308022] , Compatible Feno(Sensor Circassia Ab),Consumable [202401008] , Mouth Piece Filter For Feno(Make Circassia Ab),Consumable [202401007] , Indelible Ink Marker(Pen),Consumable [Con210101] , G6pd Deficiency(Test Kit - 10 Test),Consumable [5400011] , Reagent For Hdl Cholestrol Test(100 Ml (4 X 25)),Consumable [700856] , Abdominal Drain(Set 32 No),Each [Mis05] , Disposable Circuit For Ventilator(As Per Specification),Surgical Material [20200504] , Disposable Nasal Canula Compatible For Heated Humidified High Flow Oxygen Therapy(Adult Size),Consumable [20200844] , Disposable Nasal Canula Compatible For Heated Humidified High Flow Oxygen Therapy(Neonatal Size),Consumable [20200845] , Bmw Polybags Blue Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210608] , Bmw Polybags Blue Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210609] , Bmw Polybags Blue Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210607] , Bmw Polybags Red Colour(Sizes 28 Kg (As Per Attached Specification)),Bag [20210612] , Bmw Polybags Red Colour(Sizes 45 Kg (As Per Attached Specification)),Bag [20210613] , Bmw Polybags Red Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210610] , Bmw Polybags Yellow Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210605] , Bmw Polybags Yellow Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210606] , Blood Grouping Kit Having Anti Sera A Monoclonal(10 Ml Vial), Anti Sera B Monoclonal(10 Ml Vial) And Anti Sera D Monoclonal(10 Ml Vial),Consumable [20201039] , Solubility Test Kit (For Sickle Cell), As Per Attached Specification, Control Sample Is Not Mandatory Acessories Required- 1. Dropper 2.Test Tube (Standard Size)/Vial 3. Reading Stand 4.Micropipette With Tip/Capillary Tube 5.Lancet(6.Alcohol Swab , Kit),Kit [131145] , Malaria Bivalent Antigen-Detecting Rapid Diagonstic Tests(Rdts) For P.F And Pv (10 Card, 10 Capillary,1 Buffer Solution,10 Alcohol Swab,10 Sterile Lancet(0.15 Mm To 0.75Mm Diameter Needle Based Lancet Mounted On Small Non Metallic Pedastal For Pricking,(Pack Of 10 Test., Rate Shall Be Quoted For Pack Of 10),Specification Attached),Consumable [20200730] , Dual Testing Kit For Hiv And Syphilis Screening, Rapid Diagnostic Test Kit(Total No. Of Test 900000),Consumable [20250901] , Serum T3 Kit, Elisa(96 Test Kit Each),Consumable [700551] , Serum T4 Kit, Elisa(96 Test Kit Each),Consumable [700552] , Serum Tsh Kit, Elisa(96 / Pkt),Consumable [700553] , Cover Slip With Isi Marked Size:18X18mm(+/- 1.00Mm),Thikness 0.13.. To 0.17Mm(Pkt Of 50 Pieces),Consumable [700416] , Blood Bag Double 350Ml(As Per Attached Specification),Each [121210A] , Blood Bag Triple 350Ml As Per Attached Specification(Each),Bag [121200] , Blood Bag Triple -Sagam 350Ml(Each),Bag [121212] , Blood Bag Triple -Sagam 450Ml(As Per Attached Specification),Each [121211] , Leukoreduction Filter (Lab Side) Prestorage(As Per Attached Specification),Consumable [20250903] , Minicap (Capd) With Povidon Iodine(Each),Consumable [202106004] , Quadruple Blood Bags As Per Attached Specification(Each),Consumable [121204] , Single Blood Bag(As Per Attached Specification),Each [121213] , Soda Lime 5 Kg. Pkt , Top And Bottom Bags For Leukoreduction(As Per Attached Specification),Consumable [20250904] , Dpx Mountant , Xylene Rectified , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (0.5 - 10 Microliter):(1 Box Of 10 Packs),Consumable [202401027] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (100 - 1000 Microliter):(1 Box Of 10 Packs),Consumable [202401029] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (10 - 100 Microliter):(1 Box Of 10 Packs),Consumable [202401028] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (20 - 200 Microliter):(1 Box Of 10 Packs),Consumable [202401031] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (2 - 20 Microliter):(1 Box Of 10 Packs),Consumable [202401030] , Sanitary Napkins(As Per Attached Specification/Pack Of 6 Pads),Consumable [Mis106] , Antibody Screening(11 Cell Panel),Consumable [202402021] , Antibody Screening(3 Cell Panel),Consumable [202402020] , Antibody Titre(Na),Consumable [202402018] , Blood Grouping(Forward),Consumable [202402012] , Blood Grouping(Reverse),Consumable [202402013] , Cross Matching(Na),Consumable [202402014] , Direct Coombs Test(Dct),Consumable [202402017] , Indirect Coombs Test(Ict),Consumable [202402016] , Phenotyping(Na),Consumable [202402019] , Rare Blood Grouping Testing(Na),Consumable [202402015] , Weak D Testing(Na),Consumable [202402022] , Dengue Ns-1 Elisa (Antigen) Kit(Pack Of 96/As Per Attached Specification In Tender),Consumable [700473] , Hiv (Rapid) Test Kit-2(As Per Attached Specification),Kit [202303009] , Basic Fuchsin Chemical Name:Pararosaniline Hydrochloride,Chemical Structure C20h20cin3 Mol Wt:337.86 Dye Content: Approx 85% 88% Dye Content Must Be Mentioned Color: Metalic Green(25 Gms Glass Bottle),Consumable [121138] , Formaldehyde 40% (Conc. Formaline)(1 X 30 Lit),Consumable [710021] , Glacial Acetic Acid (Liquid) (100 Ml Bottles),Consumable [202110008] , N/10 Hcl (100 Ml),Consumable [202110010] , Sulphuric Acid(500Ml Glass Bottle),Consumable [121192] , Pyrethrum Extract 2%(25 Litre Drum)(As Per Specification Attached In Tender),Chemical , Acetic Acid - Solution(3% 100 Ml Bottle),Consumable [987846] , Acetone Detection Kit(100 Gm),Powder [Mis07] , Albumin Reagent Kit, 200Ml(4*50 Ml),Consumable [121135] , Alkaline Phosphatase(100 Ml (5 X 20)),Consumable [700855] , Aso Kit(25 Test/Packet),Consumable [Mis10] , Auto Pippets Fixed Volume(1000 Micro Liters Each),Consumable [Mis12] , Auto Pippets Fixed Volume(10 Micro Liters Each),Consumable [Mis11] , Auto Pippets Fixed Volume(20 Micro Liters Each),Consumable [Mis13] , Barium Chloride 10%(500 Ml Bottle),Consumable [Mis14] , Crp Test Kit(Latex/Card),Kit Of 25 Tests(25 Test / Kit),Consumable [Mis33] , Field Stain A(500Ml),Consumable [5410005] , Field Stain B(500Ml),Consumable [Mis53] , Formaldehyde Solution(Analytical Grade 500Ml),Consumable [20200830] , Glucose Kit (God/Pod)(350Ml),Consumable [Mis60] , Hdl Kit Ppt(2X50ml 200 Test/Kit),Consumable [987760] , Ldh Kit Pack(50 Ml Bottle),Consumable [700603] , Platelet Dilution Fluid(100 Ml),Consumable [Mis91] , Ra Factor Rapid Kit 1)Should Be Based On Latex Agglutination Slide Test 2)Qualitative And Semi Quantative Testing Facility Possible 3)Test Speed Must Be Less Than 2 Minutes(Test),Consumable [700756] , Rbc Dialuation Fluid(500 Ml Bottle),Consumable [Mis98] , Safranine (Gram Stain)(500 Ml Bottle),Consumable [Mis105] , Semen Dilution Fluid(100 Ml Bottle),Consumable [Mis107] , Sgot(25 Ml),Consumable [700736] , Sgpt100 Ml(4 X 25),Consumable [700854] , Sodium Citrate 3.8%(500 Ml Bottle),Consumable [Mis115] , Total Protein Test Kit(100 Ml Bottle),Consumable [700429] , Urea Kit Berthelot(100 Test/Kit),Consumable [Mis142] , Wbc Diluting Fluid(500 Ml Bottle),Consumable [Mis144] , N-95 Mask (Without Exhalation Valve)(As Per Specification),Consumable [20200710] , Salt Testing Kit(As Per Attached Specification , Kit),Consumable [6400013] , Capillary Tube(100 Pieces),Consumable [202301003] , Ecg Paper (Chemical Coated)(80Mmx 20 Mtr Each),Consumable [700538] , Face Sheild(As Per Specification),Consumable [20200505] , Fixer Powder (Fixer With Hardner) (22.5 Ltr/Pkt)(22.5Ltr/Pkt),Consumable [202011099] , Gram Iodine (Gram Stain)(100Ml Bottle),Consumable [700186] , Lugols Iodine (5% Solution) (Potassium Iodine-10% W/V And Iodine-5% W/V(100 Ml Bottle),Consumable [202212004] , Micro Pipette Tips 5-300Ul(100 Per Pack),Consumable [80002] , X-Ray Film Fixer(Powder To Make 13.5 Liters-Pkt),Consumable [700539] , X-Ray Film Fixer(Powder To Make 9 Liters-Pkt),Consumable [700540] , Disposable Adhesive Eye Dressing With Non Adherent Pad(Each),Consumable , Dead Body Bags(As Per Attached Specification),Consumable [20200823] , Big Repackaging Box Specifications(24-Inch Length X18 Inch Width X 18 Inch Height),Consumable [202305007] , Packing Kit Each Kit Contains As Per Specification(1. Plastic Bori- 10 Quantity, 2. Carton Tape- 01 Quantity, 3. Marker- 01 Quantity, 4. Plastic Rope- 01 Quantity),Consumable [202012183] , Sleeve (Cp) Green For 3Fdc Drugs (Type - A)(As Per Attached Technical Specification),Consumable [202305010] , Sleeve (Cp) Green For 3Fdc Drugs (Type - B)(As Per Attached Technical Specification),Consumable [202305011] , Sleeve (Cp) Green For 3Fdc Drugs (Type - C)(As Per Attached Technical Specification),Consumable [202305012] , Sleeve (Ip) Red For 4Fdc Drugs (Type - A)(As Per Attached Technical Specification),Consumable [202305008] , Sleeve (Ip) Red For 4Fdc Drugs (Type - B)(As Per Attached Technical Specification),Consumable [202305009] , Films Of Size 10X12 Inches Compatible Films To Dr System(10X12 Inches),Film , Films Of Size 11X14 Inches Compatible Films To Dr System(11X14 Inches),Film , Films Of Size 14X17 Inches Compatible Films To Dr System(14X17 Inches),Film , Films Of Size 8X10 Inches Compatible Films To Dr System(8X10 Inches),Film , Bmw Polybags Blue Colour For Sizes 18Kg(As Per Attached Specification),Consumable , Bmw Polybags Blue Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210608] , Bmw Polybags Blue Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210609] , Bmw Polybags Blue Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210607] , Bmw Polybags Red Colour For Sizes 18Kg(As Per Attached Specification),Consumable , Bmw Polybags Red Colour(Sizes 28 Kg (As Per Attached Specification)),Bag [20210612] , Bmw Polybags Red Colour(Sizes 45 Kg (As Per Attached Specification)),Bag [20210613] , Bmw Polybags Red Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210610] , Bmw Polybags Yellow Colour For Sizes 18Kg(As Per Attached Specification),Consumable [Mis203] , Bmw Polybags Yellow Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210605] , Bmw Polybags Yellow Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210606] , Sodium Hypochlorite 5% Solution(5 Ltr),Solution [4630027] , Cpk-Mb Kit (Kinetic)(25 Test/Kit),Consumable [Mis31] , Poc Kit For Syphilis (As Per Attached Specification)(10 Test Per Pack),Consumable [Mis92] , Alcohol Based Hand Sanitizer(500 Ml Bottle),Contain , Isopropyl Alcohol Not Less Than 75% V/V Or Ethanol Not Less Than 80% V/V , Hydrogen Peroxide,0.125%V/V , Glycerol 1.45 % V/V, Distilled Water/Purified Water / De-Mineralised Water(500 Ml Bottle),Consumable [202202008] , Alcohol Based Hand Sanitizer (500Ml Bottle With Dispenser),Contain, Isopropyl Alcohol Not Less Than 75% V/V Or Ethanol Not Less Than 80% V/V , Hydrogen Peroxide,0.125%V/V, Glycerol 1.45 % V/V, Distilled Water/Purified Water / De-Mineralised Water(500Ml Bottle With Dispenser),Consumable [202202004] , Micro Centrifuge Tube 1.5 Ml , Polypropylene Tubes, Resistance To Chemicals, Mechanical Stress And Temperature Extremes,(Autoclavable, Dnase Rnase/Endotoxine Free),Consumable [2020775] , Test Tube Stand, Polypropylene, 3 Tier(For Keeping 10 Ml Vtm Vials/ Tier),Consumable [20200834] , Liquid Paraffin(500 Ml, Bottle),Solution [4410002] , Cold Sterilant Solution(5 Ltr Can),Consumable [202301002] , Fogger Solution 5 Lit Cane Containing Of Hydrogen Peroxide(I.P-11.0% W/V And Silver Nitrate Dilute-0.01% W/V),Consumable [202301001] , Glutaraldehyde Solution 2% In 5 Litre Can (2 Strips/Vials Per Each Can)(5 Litre Can),Consumable [700591] , Hiv (Rapid) Test Kit-3(As Per Attached Specification),Kit [202303010] , Collection Tube Polystrene(100 Per Pack),Consumable [80001] , Cryogenic Vials(1.8Ml Sterile External Thread),Consumable [202202009] , Micro Centrifuge Tube2 Ml Polypropylene Tubes, Resistance To Chemicals,(Mechanical Stress And Temperature Extremes, Autoclavale, Dnase Rnase/ Endotoxin Free),Consumable [2020776] , Screw Cap Vial With O Ring (2Ml),Screw Cap,Leak Proof Self Standing/Flat Bottom With O Ring, Un Graduated,Polypropylene/Polyethylene,2Ml Capacity Each(Each),Consumable [130011] , Steralised And Autoclavable Culture Tube Flat Bottom, 5Ml (Plastic)(Each),Consumable [130012] , Sterile Pasteur(Pipettes 3Ml),Consumable [20200831] , Glucometer Strips 1 Should Be Able To Use Capillary Blood Samples 2 Should Have Expiry As Printed On The Label Of The Supplied Box(3 All Strips Should Have At Least One Year Expiry Date From The Date Of Supply 1 Glucometer Free With Each 1 Thousand Strips Rate Should Be Quoted For 50 Strip/Packet),Consumable [700610] , K3 Edta Evacuated Blood Collection Tube(3Ml (100 Tube/Pkt)),Consumable [202407003] , Sanitary Napkins(As Per Attached Specification/Pack Of 6 Pads),Consumable [Mis106] , Cresol With Soap Solution Ip(5 Liter Jar),Consumable [2020105] , Amikacin 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121024] , Amoxyclav (Amoxycillin/Clavulanic Acid) 20/10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121029] , Ampicillin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121042] , Azithromycin 15 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121048] , Brain Heart Infusion Broth(500 Gm),Consumable [121012] , Cary Blair Medium Base(100 Gm),Consumable [121018] , Cefazoline 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121041] , Cefoperazone 75 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121038] , Ceftazidime 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121040] , Ceftriaxone 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121032] , Cefuroxime 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [0121033] , Chloramphenicol 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121046] , Ciprofloxacin 5Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121031] , Clindamycin 2 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121051] , Colistin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121037] , Co Trimoxazole(Sulpha/Trimethoprim) 25 Mcg (23.75/1.25)(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121026] , Doxycycline Hydrochloride 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121045] , Erythromycin 15 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121050] , Gentamicin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121030] , Levofloxacin 5 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121049] , Nitrofurantion 300 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121027] , Norfloxacin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121036] , Penicillin 10 Units(50-100 Disc Per Pack),Consumable [121052] , Piperacillin/Tazobactam 100/10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121039] , Polymyxin B(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121044] , Sabroud Dextrose Agar With Chlorophenicol(100 Gm),Consumable [121010] , Teicoplanin 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121034] , Tetracycline 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121047] , Tobramycin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121043] , Vancomycin 30 Mcg(50-100 Disc Per Pack),Consumable [121053] , Hbs-Ag Elisa Test Kit(As Per Attached Specification),Kit [202307001] , Hiv Elisa Test Kit, Pack Size 96 Wells Per Kit(1 Kit Containing 96 Wells (As Per Attached Specification)),Consumable [202011053] , Conventional Medical X-Ray Film-Polyster Based Imaging Film 30.5Cmx30.5Cm (12X12)(Size-50 Sheet In One Packet),Consumable [7004063] , Conventional Medical X-Ray Film-Polyster Based Imaging Film 35.6Cmx35.6Cm (14X14)(Size-50 Sheet In One Packet),Consumable [7004062] , Conventional Medical X-Ray Film-Polyster Based Imaging Film 35.6Cmx43.2Cm (14X17)(Size-50 Sheet In One Packet),Consumable [7004061] , Conventional X-Ray Film 10X12(50 Sheet/Pack),Consumable [7004065] , Conventional X-Ray Film 12X15(50 Sheet/Pack),Consumable [7004064] , Conventional X-Ray Film 8X10(50 Sheet/Pack),Consumable [7004066] , Truenat (Mtb Chips),Consumable [202306001] , Truenat (Rif Chips),Consumable [202306002] , Bag(Spikes),Consumable [202305001] , Bacillus Thuringiensis Var Israeliensis(5% Wp),Consumable [202208001] , Sputum Container(100 Per Box),Consumable [121191] , Electric Cautery Lead/Each-Disposable Electro Surgical Pencil-4Cm(Each),Each [120864] , Dengue Ns-1 Elisa (Antigen) Kit(Pack Of 96/As Per Attached Specification In Tender),Consumable [700473] , Blood Bag Triple -Sagam 450Ml(As Per Attached Specification),Each [121211] , Bacillus Thuringiensis Var Israeliensis 5%(As (Aqueous Suspension)),Consumable [202208002] , Collection Tube Polystrene(100 Per Pack),Consumable [80001] , Liquid Paraffin 50Ml(Bottle ),Consumable [700549] , Screw Cap Vial With O Ring (2Ml),Screw Cap,Leak Proof Self Standing/Flat Bottom With O Ring, Un Graduated,Polypropylene/Polyethylene,2Ml Capacity Each(Each),Consumable [130011] , Steralised And Autoclavable Culture Tube Flat Bottom, 5Ml (Plastic)(Each),Consumable [130012] , Inj Ganciclovir500 Mg , Solution Hydrogen Peroxide 500 Ml , Sol. Sodium Hypochloride Solution 5%(500 Ml Bottle) , Liquid Paraffin Heavy (Grm6362-500Ml) , Liquid Paraffin Light (Grm1310 -500Ml) , Absolute Alcohol 500Ml , H2o2 100Ml , Indian Ink Dye Grm5259/ 23Ml , Lugols Iodine S-01 (125Ml) , Xylene (Hi-Lr) As078 (500Ml) , Ph Buffer (100Ml) , Alpha Naphthoilamine R009-100Ml , Sulfanilic Acid R015-100Ml , Acetic Acid Mb052-500Ml , Petroleum Jelly Grm1810-500G , Ninhydrin Reagent Mb234-25G , Cornmeal Agar (Cma) M-146 (500 Gm) , Hi-Crome Candida Differential Agar M-1297A (100Gm) , Muller Hinton Agar (500 Gm Pack) , Nutrient Agar (500Gm Pack) , Sabouraud Dextrose Agar (Mh-063) -100 Gm Pack , Triple Sugar Iron Agar (500 Grmpack) , Tcbs Agar (100 Grmpack) , Rpmi(1640) Medium (500Gm) , Potato Dextrose Agar (Pda) Sm-096-100 Grm Pack , Dermatophyte Test Medium (Dtm) -100 Gm , Of Media (M-395)-500 Gm , Gelatin (M920-500G) , Lysine Decarboxylase Broth M-376-500G , Nitrate Agar M4395-500G , Esculin Agar M1386-500G , Nitrate Broth M439-500G , Skimmed Milk Media-100Gm , Fluorescence - Denitrification Medium M565-500G , Blood Agar Base M073 -500Gm , Fluconazole 25Mcg (Sd 232)-1 Packet Of 5 Vial (Each Vial Of 100 Disc ) , Amphotericin B 20Mcg -1 Packet Of 5 Vial (Each Vial Of 100 Disc) , Caspofungin 32Mcg Em119-10St-1 Packet Of 5 Vial ( Each Vial Of 100 Disc ) , Clotrimazole Em 141 10St-1 Packet Of 5 Vial (Each Vial Of 100 Disc ) , Cefoxitine Disk (1Micro Gram) 1 Packet Of 5 Vial ( Each Vial Of 100 Disc ) , Actidione (Cycloheximide) Ms5583-1G , Micro Pippet(100-1000 Microliter) , Loop Sterilization Burner , Mannitol Salt Agar Smh118-500Ml , Thioglycolate Medium Base-M1616 500G , Ferric Chloride , Hichrome Chromogenic Coli Form Agar M1991i , Glass Mccartney Bottle With Lid , Andrades Peptone Water500g , Sugar Fermentation Media , Glucose Fermentation Media , Sucrose Fermentation Media , Lactosefermentation Media , –Maltose Fermentation Media , Enzymic Strips , 1 Cefotaxime / Cefotaxime+ Clavulanic Acidem099 , 2 Ceftazidime/ Ceftazidime+ Clavulanic Acid Em098 , Anti Fungal Agent , 1 Amphotericine B , 2 Fluconazole , 3 Ketoconazole , 4 Nystatin , Octa Disk Combi I Combi 7 , Antibiotic Zone Scalepw297 , Candida Agar M1602 , Pipettes , Pipettes 100Ul , Pipettes 1000Ul , Solution Bottle Sterile , Solution Bottle Sterile Tcp 037 , Solution Bottle Sterile Tcp 038 , Solution Bottle Sterile Tcp 040 , Test Tube Racks , Test Tube Large , Test Tube Medium , Test Tube Small , Filter Paper (Whatman No.1) , Cellulose Nitrate Membrane , Forceps , Surgical Blades No.22 , Scissors , S.S. Petri Plate Carrier With Handlela659 , Screw Tubes , Durham’Stube Long , Wash Bottles , Disposable Plastic Flexi Loops , Hand Sanitizer 500 Ml , Liquid Hand Wash 500 Ml , Suction Tube With Tip Vaccum (Vaccu Suck Yankaur) , Dialyser (1.6 M2) , Hd Av Line (Tubing Set) , Part A (Acetic Acid) Solution , Part B (Bicarbonate) Hd , Citric Acid Solution 50% , Autoclavable Bags For Waste Disposable (Medium) , Autoclavable Bags For Waste Disposable (Large) , Tissue Paper Roll , Ph Papers , Marker Pen Wide/Narrow/Tip , La483 , Ceiling Tap For Lab. Ware , Glass/Slide Pencil/Marker , Slide Staining Jar , Coplin Jar , Slide Staining Racks , Cover Slipenglish Glass , Hand Washing Solution , Glass Ware Washing Solution , Environmental Sanitizer & Spray Pump Co014 , Hi Gas Burner , Niddle Cutter , Hi Loop Electric Sterilizerla832 , Colony Counter La660 , India Ink , Urea Solution Fd2535x , Cedar Wood Oil , Paraffin Oil , Antisera , Antiserasalmonella , Antisera Vibrio- , Antisera E.Coli , H2o2 , Gram Negative Broth , Selenite F Broth , Dtm , Sds , Rcm , Hand Gloves , Powder Free Surgical Gloves , Mantoux Test 5 Tu 10Tu , Thayer Martin Medium , Tinsdale Medium , Lj Media , Loffler’Sserum Slop , Dca Agar , Xld Agar , Ss Agar , Of Sugar Media , Tcbs Agar , Ashdown’S Media , Gas Fumigation Sachet , Cetrimide Agar , Congo Red Agar , Tryptic Soya Broth , Bile Aesculin Agar , 2 Ply Absorbent Tissue Roll Lab. Grade , Purple Nitrile Gloves With Beaded Cuffs, Textured Finger Tips With Minimum 6 Mm Thickness , Absorbant Tissue Roll 2 Ply X 50 Mtr , Aluminium Foil 72 Mtr , Sodium Hypochlorite , Iso Propanol Absolute(500 Ml) , Ethanol Absolute (500 Ml) , Racked Filter Tips 1000Ul Compatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Racked Filter Tips 200 Ulcompatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Racked Filter Tips 100 Ulcompatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Racked Filter Tips 10 Ulcompatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Filter Tips 100-1200 Ul (D1200) Proprietory Item For Gilson Multichannel Pipette , Hard Shell 96 Well Plates, Low Profile, Thin Wall, Skirted , White Serial No Hsp9655 Proprietory Item For Biorad Cfx-96 Real Time Pcr , Microseal ‘B’ Pcr Plate Sealing Film Adhesive Optical Serial No Msb1001 Proprietory Itemfor Biorad Cfx-96 Real Time Pcr , Microamp Optical 96-Well Reaction Plate (N8010560) Proprietory Item Quant Studio 5 Applied Biosystem Real Time Pcr , Microamp Optical Adhesive Filmproprietory Item , Elisa Reader Print Rolls 3” , Magmax Viral Isolation Kit With Plastic Consumables Proprietory Item Make Thermofisher (Quant Studio 5) , Kingfisher Duo Prime Deep Well 96 Plateproprietory Item (95040455/A48424/95040450/ A48305) , Kingfisher Duo 12 Tip Comb , Kingfisher Duo Elution Strip , Kingfisher Duo Elution Cap , Total Nucleic Acid Extraction Kit Qiagen Proprietory Item , Stool Dna Extraction Kit , Conical Bottom Eppendorf Tube Dna/ Rna Free(1.5 Ml) , Cryovials Screw Cap Withstand -80 C , Cryotags Withstand -80 C , Falcon Tubes (50 Ml) , Falcon Tubes (15 Ml) , Parafilm Roll , Borosil Screw Cap Bottle 1000 Ml , Borosil Screw Cap Bottle 500 Ml , Borosil Screw Cap Bottle 250 Ml , Borosil Conical Bottom Flask 250 , Borosil Conical Bottom Flask 500 , Measuring Cylinder 100 Ml , Measuring Cylinder 1000 Ml , Plastic Spray Bottles 500 Ml , Laboratory Grade Hand Wash (500 Ml) , Chlorine Based Gas Fumigation Agent For Virology Lab Disinfection , 0.5 Ml Pcr Strip With Caps (8 Strip ) Proprietory For Cfx 96 , Test Tube (Capacity – 20Ml) , Beaker (Capacity – 50Ml) , Beaker (Capacity – 100Ml) , Beaker (Capacity – 250Ml) , Beaker (Capacity – 500Ml) , Beaker (Capacity – 1000Ml) , Test Tube Brush , Sprit Lamp , Glass Pipette (10 Ml) , Urino Meter , Pap Pen For Immuno Histochemistry (Ihc) , Polymer Kit , Hrp +Dab 15 Ml. , Micro Pippets Variable Vol. , Anti Er 3 Ml. Rtu , Anti Pr 3 Ml. Rtu , Immuno Histo Chemistry Wash Buffer 6 X 20 Ml. , Antigen Retrieval Solution , Immuno Histo Chemistry (Ihc) Slide 100 / Pk , Anti Hertu N 3 Ml. Rtu , Heparin Tube , Sodiumcitrate Tube , Biomedical Dustbin Set With 4 Colours , Accu Pipette(Tarson) Cat. No. 030090 , Micropipette Stand , Micropipettetips (05-10 ?L) , Micropipettetips (10-200 ?L) , Micropipettetips (200-1000 ?L) , Micropipettetips (50-100 ?L) , Micropipettetips (05-10 ?L) , Micropipettetips (10-200 ?L) , Micropipettetips (50-100 ?L) , Beaker (10-100 Ml) , Beaker(100-1000 Ml) , Test Tube Rack , 0.25 Micrometer Syringe Filter , Mini Cooler , Oil Emulsion(1X 250 Ml) , Para Film Role , Starlabs Diamond Tip Glass Marking Pencil , Freezer Tapes , Blood Transportation Box , Dialyser (1.8 M2) , Dna Extraction Kit , Rtpcrhpv Genotyping (16,18,45 Multiplex) Probe Pcr Kit , Molecular Grade Ethanol (96-100%) , Propane(Iso Propyl Alcohol) , Coplin Staining Jar , Molecular Biology Grade Water , Liquid Based Cytology , Slide Stand , Measuring Cylinder , 8-Strip Tube & Optically Clear Flat Caps For Pcr ( Thermo Fisher) , Pcr Tubes (0.2Ml) (Thermo Fisher) , 1.2 Ml Pcr Tube , 0.5Ml Pcr Tube , Pcr Cooler , Pcr Plates (Thermo Fisher) , Opticalsealingfilm (Thermo Fisher) , Pcr Tube Stand , Forcep , Pbs 10X , Tris Edta , Lb Agar Media , Naoh Pellet , Chloroform , Ethanol 70 % , Acetone , Methanol , Hplc Water , Weighingbalance (Mg) , Capillaries , Safety Goggles( Formolecular Lab) , Micropipettetips (200- 1000 ?L) , Glass Slide , Coverslip(Large &Small Size) , Surgicalheadcap , Surgical Mask , Surgicalgloves , Lugal’S Iodine (100Ml) , Acetic Acid Glacial(99.5 %) , Nitrile Gloves , Ph Strips ( Ph Meter) , Distilled Water , Rotar (15 Ml-50 Ml) , Forcep 10 , Pipette (Autoclavable) (10?L, 200?L,1000?L) , Vortex Mixer(Brand-Spinix) , Petri Plates (Autoclavable) , Loop , Spirit Lamp , Cotton Bundles , Discarders Glass , Incubator , Autoclavable Bags 50 , Measuringbeaker (All Size) , Test Tube (Glass Ria Vial 5 Ml) , Testing Cup (1.5 Ml) , Diffd5 (Agappe Mispa Count Xplus) , Diffc5 (Agappe Mispa Count Xplus) , Diffl5 (Agappe Mispa Count Xplus) , Diffp5 (Agappe Mispa Count Xplus) , Diluent (Dx3) (Agappe Mispa Count X ) , Lyse (Lx3) (Agappe Mispa Count X ) , Probe Cleaner(Agappe Mispa Count X ) , Electrophoresis Chamber , Etbr(Ethidium Bromide) , Agar Powder (Bacteriological) , Tris Hcl , Petri Plates , Media Agrose, Acrylamide, Cellulose , 4 Mobile Phase- Rinse, , Diluent , Seal Wash , 10%Isopropanol , Optical Adhesive Film -25 Covers , Optical 96 Well Reaction Plate Thermofisher , Carboyl Fushion , Propidium Iodide , Ethydium Bromide , Acridine Orange , Sonicator (Water Bath) , Acetonitrile Ethyl Acetate , Hexane , Butanol , Formic Acid , Monobromobimane (Mbb) Probe , Cystein / Glutathione (Thiol Standerd) , Elisa Kit For Ferritin Assay , No. 41 Whatman Filter Paper , Polypropylene Tube , Elisa Kit For Vegf , 20 Ml Glass Vial With Cap , Tris Hcl Buffer , 100 Ul Proteinase K , 5 Mm Cacl2 , 10 Ml Of A 30 % H2o2 Solution , Pig Pancreatic Enzyme , Porcine Lipase , Glass Flask 100 Ml. , Cotton Gowns , Plastic Free Cgloves , Sample Vials: Polypropylene Or Teflon Vials , Digestion Vessls : Teflon Digestion Vessels For Sample Preparation , Zinc Salt (Eg. Zinc Acetate Or Zinc Chloride) , Trupcr Hpv 16 & 18 Detection , Norgens Human Papillomavirus (Hpv) (High And Low Risk) Taqman Pcr Detection , Nucleic Acid Extraction Kit , Magmax Ffpe Dna / Rna Ultra Kit , Rnase Free Microfuge Tubes (1.5 Ml) , Human Il - 1 Beta Elisa , Human Il - 1 Alpha Elisa , Human Tnf - Alpha Elisa , Human Cox - 2 Elisa , Human Cox - 1 Elisa , Human Papillomavirus (Hpv) (High And Low Risk) Taqman Pcr Detection , Tissue Homogenizer , Hepatits B Quantitative Rt Pcr (Hbv Dna) (96 Rxn) , Hpv Genotyping Rt Pcr Kit (96 Rxn) , Stool Dna Extraction , Total Nucleic Acid Extraction Kit , Gentera Rna Advantage / Rna Later Solution (100 Ml) , Respiratory Virus Panel Rt Pcr , Filter Tips 100-1200 Ul (D1200)Gilson (D1200) , Tbe Buffer Tris Base (500 Gm.) , Boric Acid For Molecular Biology 99.5 % (1 Kg.) , Agarose Powder (500 Gm.) , Edta Disodium Salt Dehydrated(500 Gm) , Orange Blue Loading Dye 6 X (3 Ml.) , 100 Bp Dna Ladder (250 Gm.) , Red Protein Gel Stain (500 Ul) , Micropipette Stand , H1n1 /Inf A/B Rt Pcr
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
13.
Housing Urban and Rular Development #11223251 Technical Bid
Tender for Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical &-Hospital Division , Jammu Supply, Installation, Testing & Commissioning Of Medical Grade Online Double Pass Reverse Osmosis(Ro) Plant Of 500 Lph Capacity For Dialysis Along With Allied Works On Turnkey Basis At Sdh Jagti Mhdj/E-Nit 10 Of 2026-27 Dated: 20.04.2026 Due : 29.04.2026 Name Of The Bidder/ Bidding Firm / Company : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. 0.0 Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Rates Inclusive All Taxes Excise Duty Gst Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes In Rs. P Total Amount With Taxes Total Amount In Words , Medical Grade Double Pass Reverse Osmosis System Of 500 Litre Per Hour Capacity For Dialysis Unit, Along With Allied Works In Sub District Hospital Jagti, Jammu On Turnkey Basis. Complete Job As Per Site Condition In All Respect (A Turnkey Job) As Per Technical Specifications/Scope Of Work Mentioned In E-Nit At Serial No. 1 , Provided And Fixing Of Civil & Structural Works-Rooftop Shed (15Ft X 12Ft) The Civil Works Will Comprise Design, Fabrication, And Execution Of A Structurally Sound Rooftop Shed Engineered To Withstand Environmental Loads And Ensure Long-Term Service Life. Job Includes Providing And Fixing Of Elevated Reinforced Cement Concrete Base Slab: Height: 6 To 8 Inches (150-200 Mm) Above Rooftop Level. Material: M25 Grade Reinforced Cement Concrete (Rcc) With Fe-500 Tmt Bars, Conforming To Is 456:2000.Slope: 1:100 Slope Towards Drainage Points For Effective Water Runoff. Drainage System: 4-Inch Diameter Pvc Pipes (Reputed Brand), Integrated With The BuildingS Rainwater Disposal Network. Boundary Walls Construction: 230 Mm Thick Brickwork (Masonry Parapet Walls) On All Four Sides, Fixed At 2 Feet (600 Mm) Height. Plaster: Interior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives Exterior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives. Tiling Interior: 100% Vitrified Tiles (Is-Compliant) With 100 Mm High Skirting. Roofing & Cladding Material: Color-Coated Corrugated Galvanized Iron (Cgi) Sheets, 0.40 Mm Thick, For Both Roofing And Wall Cladding. Support Structure: Mild Steel (Ms) Angle Posts (50X50x5 Mm), Conforming To Is 2062 Grade, Finished With Red Oxide Primer And Synthetic Enamel Paint. Fixing: Secured With Galvanized J-Hooks And Epdm Washers. Roof Slope: Cgi Sheets On The Roof Installed With A 1:100 Slope To Align With The Drainage System, Ensuring Proper Water Runoff. All Steel Members Conforming To Is 2062 Grade, Red Oxide Primer + Synthetic Enamel Paint Finish. Secured With Galvanized J-Hooks + Epdm Washers. Access Door 1.2 M (4 Feet) Wide Ms Framed Powder-Coated Door With Heavy-Duty Lock System. Interior Finishing 100% Vitrified Tiles, Reputed Make, Is-Compliant. Skirting Up To 100 Mm Height. Electrical Works • Wiring & Distribution Concealed Wiring With Frlsh Copper Cables As Per Is 694. 10 Sq.Mm Copper Cable Dedicated To Ro Plant. Job Includes Fixtures & Accessories Ceiling Fan, Exhaust Fan, Switchboards, Lighting. 16A & 6A Sockets Of Reputed Make. Double Pole Mcbs For Safety. , Supply, Installation, Testing And Commissioning Of 5Kva Online Ups With In Build Isolation Ups/Inverter System & Stabilizer (If Required) For Power Back Up Of Ro Plant At Dialysis Centre Of Sdh Jagtifor Uninterrupted Power Supply With Maximum Battery Backup Of Load To The System Along With 2-Years Warranty. Description Of Technical Specifications: • Power Backup • 5 Kva Online Ups, Reputed Make, 4-5 Hours Backup. • Directly Connected To Ro Plant. • Range 160 - 280Vac • Pwm Technology & Igbt Based • Pure Sine Wave Output With Thd 3% • Power Factor 0.8 • Large Input Operating Range, Eliminates Unnecessary Battery • D I S C H A R G E • Ups Startup Without Battery • Multi-Functional Lcd/Led Display • In-Built Galvanic Isolation • Automatic Battery Charge In Ups Off Mode • Static Bypass And Cold Start • Emi/Rfi And Noise Filter • Generator And Solar Compatible • Auto-Restart Function • Extended Backup Time Suitable Charger • Protection: Output Short Circuit, Low Voltage Of Battery, Over Or • Lack Of Input Voltage, Overload And So On • Standard: Iec/En62040-1, 62040-2, 62040-3, Complying To Ce, Bis, Rohs, • Iso:9001, Iso:14001 • Battery Rack Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Jammu And Kashmir View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
19.
Defence #11200248 Price Bid
Tender for Sch A Part-I To Xii Note: This Schedule Is Pre-Priced By Mes And The Rate Indicated Under Col 5 Signifies This Fact Only , Total Amount Of Sch A Part-I (Building And Structures) , Total Amount Of Sch A Part-Ii (Site Clearance, Excavation And Earthwork) , Total Amount Of Sch ‘A Part Iii (Internal Water Supply) , Total Amount Of Sch ‘A Part Iv (Internal Electric Supply) , Total Amount Of Sch ‘A Part V (Road, Path And Culverts) , Total Amount Of Sch ‘A Part Vi (Sewage Disposal) , Total Amount Of Sch ‘A Part Vii (Area Drainage) , Total Amount Of Sch A Part-Viii (External Water Supply) , Total Amount Of Sch A Part-Ix (External Electric Supply) , Total Amount Of Sch A Part-X (Lightning Protection) , Total Amount Of Sch A Part-Xi (Air Conditioning & Cooling Appliances) , Total Amount Of Sch A Part-Xii (Dg Set) , Schedule A Part-Xiii (Miscellaneous B/R And E/M Works) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 5 Signifies This Fact Only. , S & F Square Profile Led Lighting Fixture With Extruded Polycorbonate,Environmental Friendly,Energy Efficient Ready To Use Pack Led Tube Light Fitting 20 Watt With Led Light Source 6500K With Uniform Light Output, With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. , Supply And Fixing In Factory Made Powder Coated Sheet Metal Enclosure, Tpn Vertical Distribution Boards With Mccb As Incomer Ip43 Protection Double Door : Plain 4 Way With Suitable Rated Busbar, Neutral Link, And Mcb Sp/Tp As Outgoings Complete All As Specified And Directed. Note :Mccb And Mcbs Are Not Included In This Item And Paid Separately. , S&F Mccb 4 Pole, 415 V, Adjustable Type Thermal Magnetic Release, 100 Amps With Breaking Capacity 25 Ka And Making Connection With Suitable Size Of Copper Lugs Etc Complete All As Specified And As Directed. , M&L For Preparation Of Road Surface And Applying Thermoplastic Reflective Paint For Marking Of Minimum 2.0 Mm Thick Single Coat As A Centre Line Or Edge Line Etc, Road Marking N Exc 100 Mm Width Using Thermo Plastic Paint (Hot Application) White/Yellow By Indigenous Modern Propelled Road Marking Machine As Directed Including All Ingredients Such As Binder, Glass Beads, Titanium Dioxide, Calcium Carbonate, Inter Fillers Etc, Thermoplastic Requirement For Glass Beads Shall Be Confirming To Bs-6086 Of Most Specification Including Spraying Of Glass Beads Etc Complete All As Per Manufacturers Instructions And Complete As All Specified And Directed. , M&L For Construction Of Valve Pit/Chamber Of Internal Dimensions 900 Mm X 900 Mm X 900 Mm, Using Plain Cement Concrete 1:4:8, Type D-2, Using 40Mm Graded Stone Aggregates For Foundation, 23 Cm Thick, Brick Wall Built In Cement Mortar (1:4) ,15 Mm Thick Rendering All Around The Brick Work In Cement Mortar (1:6), 75 Mm Thick Plain Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregates In Coping Including Necessary Form Work, 3 Coats Of White Wash On Rendered Surfaces And On Coping, 5 Mm Thick Mild Steel Top Sheet Cover With Frame Made Out Of 40X40x6 Mm Angle Iron, Locking Arrangement, Including Painting Of Steel Surface With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer All As Specified And As Directed. , Cutting Existing 80 Mm Dia Pipe For Inserting Tee Of Size 80X80x40 Mm Including Lead Joint And Excavation Etc Complete All As Specified And Directed , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 110 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24, 450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed. , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 50 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24, 450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed. , Supply, Install, Testing And Commissioning, Factory Made And Tested (Including Cpri Type Test Certified) Lt Panel Board Out Door Type, Floor Mounted, Compartmentalised And Ip-63 Suitable For 415 Volts 3 Phase 4 Wire, 50 Hz Ac Supply System, All As Specified And Directed, Having Bus Bar Chamber With Insulated Aluminium Bus Bars 300 Amps Rating Installed On Porcelain Insulators. The Panel Shall Be Dust And Vermin Proof, Made Of 3.15Mm Crca Ms Sheet And With Base Frame Of 50X50x6mm Angle Iron , Powder Coated, Front And Rear Opening Type With Aprons For Cable Entry With Double Door Shutter And Locking Arrangement With And Including Following Items. (Notes : The Rate Quoted Shall Include Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ).Note: Panel Board Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. , Incoming:- (A) Mccb 4 P, 415 Volt 200 Amps, 36Ka, 50 Hz With Fixed Thermal And Magnetic Setting -01 No Outgoing:- (B) Mccb 4 P, 415 Volt 100 Amps, 25Ka, 50 Hz -03 Nos. (C) R,Y,B Indicators (D) Multifunction Digital Square Type Intelligent Panel Meter To Measure Voltage, Current, Frequency, & Power Factor - 01 No , Supply, Install, Testing And Commissioning Of Silent Diesel Engine Generating Set, 125 Kva/100 Kw, 1500 Rpm, 3 Phase, 415 V, 50 Hz, Power Supply Alternator Along With Fuel Tank, Control Panel., Battery And Complete Set Installed In Sound Acoustic Enclosure And Standard Accessories And Fittings With Power Factor 0.8, Plain Cement Concrete Foundation Suitable For The Generator Set As Per Manufacturers Instructions Complete With Standard Accessories And Microprocessor Based Integrated Dg Set Controller With Coupled To Alternator Rated At 125Kva/100 Kw At 415 Volts, Set Mounted On Channel Iron Base Frame Complete With Sub-Base With Batteries, Avm Pads And Std Panel All As Per Guideline Of Latest Cpcb Iv+ Norms All As Specified And Directed And Comprising Of The Following: Make: Kirloskar/Greeves/Cummins , (I) Engine: Engine With Direct Injection, Water Cooled, 3 Cylinders, In-Line,4 Strokes Rated At Developing 1551 Bhp @ 1500 Rpm For Continuous Duty Of Suitable For 125 Kva Alternator With Provision Of 10% Over Load For One Hour In Every 12 Hour Running Confirming To Bs 5514/ Iso 3046 Standard Totally Enclosed As Per Oem Specification And Directed By Engr-In-Charge. The Engine Has The Following Specification:- A) Mechanical Fip B) Mechanical Governor C) Turbocharger, Exhaust Manifold, Stainless Steel Exhaust Flexible Connection D) Radiator Cooled, With After Cooled E) Plate Type Lube Oil Cooler F) Filters G) Lube Oil H) Dry Type Replaceable Paper Element Air Cleaner J) Flywheel Housing And Flywheel To Suit Single Bearing Alternator K) Starting Motor-Electric, Battery Charging Alternator L) First Fill Lube Oil And Coolant (Ii) Alternator: Brushless Alternator, Self -Excited, Self -Regulated, Floor Mounted With All And / Or Roller Bearings, Statically And Dynamically Balanced Screen Protected Acoustic Enclosure Confirming To Is 4722 / Is 13364, Ip-23 Protection With H Class Insulation Limited Temperature Rise Of Class H, Automatic Voltage Regulator From No Load To Full Load, Ammeter Capacity Of Delivery 125 Kva, 415 Volts, 3 Phase, 50 Hz And Lagging For Ac Supply And Will Be Suitable For Tropical Conditions All As Per Oem And Directed By Engr-In-Charge. (Iii) Instrument Panel : Engine Instrument Panel Consisting Of On/Off Starting Switch With Key Lubricating Oil Pressure Gauge, Water Temperature Gauge, Battery Charging Indicating Lamp, Hour Meter With Rpm Indicator, Safety Control Against High Temperature Of Water, Over Speed Stop With Double Driver Adopter As Per Oem Specification And Directed By Enge-In-Charge. , (Iv) Other Fittings: (A) Battery Charger : Battery Charger Having Electric Circuit Consisting Of Rectifiers, Capacitors And Resistance Etc. The Battery Charger Should Be Able To Charge 12 Volts 88 Ah Battery At A Time (V) Dg Set Shall Be Supplied Along With Acoustic Original Enclosure Of The Manufactures Suitable For 125 Kva Dg Set And All Connecting Accessories As Per Latest Cpcb Iv+ Norms (Vi) The Diesel Oil, Lub Oil Etc. For Smooth Functioning Of Dg Set During Ph-I & Ph-Il Complete Testing And Full Tank Filing Of Diesel Oil After Ph-I & Ph-Ii Testing, Topping Of Lub Oil Etc. Required For Commissioning And Testing Of Dg Set. (Vii) Amf Panel: - Supply Installing Commissioning & Testing In Microprocessor Based Amf Panel Board Factory Made, Out Door Type Ip-65, Cubical Type, Vermin Proof, Dust Proof, Water Proof Made Out Of 3.15 Mm Thick Crca Sheet And Angle Iron Frame Of Size 50X50x6 Mm Inside Depth Not Less Than 50 Cm And Size Suitable To Accommodate The Following Accessories With Insulated Tpn Copper Busbar Of Rating Not Less Than 1.5 Times The Rated Capacity Of The Incomer Mccb Suitable For 125Kva Dg Set. Hinged Door With Locking Arrangement Duly Painted With Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Both Internally And Externally And Connecting With Cable With Lugs Including Internal Wiring With Copper Cable Of Suitable Size Using Lugs Compressing The Following Accessories All As Directed. (Notes : The Rate Quoted Shall Include For Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ) And Copper Bus Bar 240 Amps Duly Colour Sleeved Mounted On Epoxy Insulators-01 Set. Note:(I) Amf Panel Suitable For 100 Kva Dg Set To Connect With Grid Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. The Amf Panel Has The Following Specification:- A) 200A, 4 Pole Contactor For Alternator With Thermal Over Load Relay B) 200A, 4 Pole Contactor For Mains C) Mcb For Short Circuit Protection D) Indication Led (Dg On, Load On Dg, Main On, Load On Main, Battery Charge On) E) Push Buttons (Engine Start/Stop, Generator Contactor Close/Trip, Main Contactor Close/Trip If Provided, Fault Accept/Reset) F) Voltmeter & Ammeter And Other Connecting Accessories And Safety Features For Successful Auto Operation Of 125 Kva Dg Set. (Viii) Excavation, Earthwork And Provn Of Plain Cement Concrete Plinth Of Suitable Sizes For Installation Of Dg Set & Connected Accessories Complete As Per Oem/ Site Requirements. , Supply And Fix Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 2.0 Kva Complete All As Specified And As Directed By Engr-In- Charge. Makes :- Automatic Electrical (Ae)/ Vinitec/Aplab/V Guard , Supply And Fix Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 3.0 Kva Complete Suitable For Inverter Type Ac All As Specified And As Directed. Makes :- Automatic Electrical (Ae)/ Vinitec/Aplab/V Guard / Volina , S&F Two-Way Bib Taps 15Mm Dia, With Wall Flange And Aerator Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed. Make: Cat No. F1015161 Of Cera Or Techno Commercially Equivalent Model Of Appendix C Makes.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 9
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
23.
Tourism #11175186 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation In Trenches For All Leads & Lifts In All Type Of Strata Comprising Of Any Type Of Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Convenient As Permitted Excluding Blasting In All Conditions Such As Dry, Moist, Foul, Saturated, Submerged, Etc,. Including Dressing Of Sides, Planking & Strutting, Timbering ,Ramming Of Bottom ,Pumping And Bailing Out Water ,Barricading Danger Lighting Guarding, Getting Out Excavated Soil & Stacking As Directed By Engineer For All Leads & Lifts Etc. Complete , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Supplying And Filling In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. Moorum , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-30 Grade Of Concrete , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. I.Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc.String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Providing And Fixing Exposed Laterite Stone Of 100 Mm Thk For Dado ,Laid On Cement Mortar Paste 1:4 (1 Cement : 4 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Stone Including Rubbing Including Applying Acrylic Varnish Etc Complete. As Per Designs And The Directions Of The Engineer-In-Charge. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Vitrified Floor Tiles In Different Sizes Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In Colours And Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigment Etc., Complete. 600X 600 Mm Dark Shades , Providing And Laying Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Lakha Red , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid . Plain White Makrana Slab 25Mm Thick , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : White Makrana Marble , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete). , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 30 Cm Lx 40 Cm H X 15 Cm T , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Steel Bars & Disposal Of Unserviceable Within 50 , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. 12 Mm Cement Plaster 1 :3 ( 1 Cement : 3 Sand) , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surfaces Etc. 50 X 12 Mm , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 250 X 16X 5Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Providing And Fixing 150 Mm. Bright Finished Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutter Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete , Providing And Applying Decorative Plastering For A Window Sorrounding, Using 1:4 Morter Mixture With Bricks Chips,Featuring A 300Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer. (The Job Involves Applying A Decorative Finish Over Underlying Structure, Incorporation Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Double Piller At The Corner (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center For Hall(Ht 2.10 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 200Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Arch Of Span Of 3Mt., Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering Ofr Cornice At Ceiling In Hall Of Ht 0.40Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Construction And Installation 6Mt Height Replica Of Shree Suptakoteswar Stumb Using Sadhahalli Grey Granite Stone With Intricate Carvings, Moulding As Per Drawing. The Structure Should Have 6Mt Ht. With 2.5 X2.5X0.70 Mt Ht At Base And Stumb Of 1.50X1.50X5.25 Mt Height At Top As Per Details Drawings And Direction By The Engineer. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A 150Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Padma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Cornice ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Adhopadma For Sajja), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Electrical Works , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 1/2 Core 70Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 1.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core 2.5 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 70 Sq. Mm. , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(K) 12 Way (8+36), Double Door, Horizontal Type Cat B , Supplying And Fixing 40 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C -- With Cat B Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.(C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.A) 20 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.B) 25 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Requiredd) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Requireda) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredb) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(C) 6 Module (200Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredsitc Of Wall Fan,600 Mm Sweep, With All Accessories. , Supply Installation Testing And Commissioning Of 8-10 W Spot Light Cob Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supply Installation Testing And Commissioning Of W 80W Flood Light Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =600X1500(H),Lamp Base- G9, Wattage- 7X42w Max, Complete With All Accessories. , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =1200X1500(H),Lamp Base- G9, Wattage- 12X42w Max, Complete With All Accessories. , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineerincharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately). , Supply Installation Testing and Commissioning of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 400Mm. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo Separate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip65, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of Aluminium Profile For Neon Flex , Supply Installation Testing and Commissioning of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv , Supply Installation Testing and Commissioning of High Quality Dmx Decoder, Power Input : Dc 24V , Supply Installation Testing and Commissioning of Pvc Insulated Multi Core Electrical Un Armoured Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete For Both Power And Dmx. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of Ip65 I Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System Quick Lock High Impact Materials - Long-Lasting And Reliable , Supply Installation Testing and Commissioning of Ip65 I Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Female Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options. - 12 Nos Of 6/10A Sp Outgoing Mcbs. - 1No Of 32A Tpn Incoming Mcb. , Supply Installation Testing and Commissioning of Ip Driver Box Made Up Of Pvc / Upvc And Ivory Connectors For The Internal Terminations And External Outgoing Connecting Points, Fiber / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. , Supply Installation Testing and Commissioning of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. , Supply Installation Testing and Commissioning of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. , Supply Installation Testing and Commissioning of Programming Charges , Supply Installation Testing and Commissioning of Additional Accessories For Installing The Lights As Per The Final Drawing/Site Condition Consisting Of Clamps, Brackets, Angles, Conduits, Joints, Hardwares Like Fasteners, Nut & Bolts Etc., , Street Light Panel: Supply, Installation, Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 100A Tpn Mcb As Incommer And 11 Nos Of Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based Programmable Digital Almac Timer As Directed By Engineer In-Charge
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
24.
Defence #11162655 Technical Bid
Tender for Material & Labour For In Replacement Of Light/Fan Point Wiring With 1.5 Sq Mm (Nominal Area), Pvc Insulated Unsheathed (Frlsh), 1100 Volts Grade, Multi-Stranded Copper Conductor, In And Including Pvc Casing Capping Of Adequate Size With All Fittings And Accessories Including Pvc Boxes For Housing The Switches ( Make Of Box Prestoplast,Prestoteak), Including Pvc Insulated And Unsheathed (Frlsh)Single Core Multi-Stranded Copper Conductor Cable Of Size 1.5 Sq Mm Green In Colour As Earth Continuity Conductor Connected To Common Earth Dolly Upto Ceiling Rose/Light Point Complete All As Specified And Directed. , All As Per Item No 1 Here In One Bell/Buzzer Point Controlled By One Bell Push Complete All As Specified And As Directed . , All As Per Item No. 1 Here In Before One 3 Pin Socket Outlet, 6 Amps On The Same Board With Other Switches, With Cables 1.5Sq. Mm Size Complete All As Specified And Directed. , All As Per Item No. 1 Here In Before But For One 3 Pin Socket Outlet 6 Amps Three Pin Controlled By One Switch On Independent Board Complete All As Specified Directed. , All As Per Item No. 1 Here In Before But For One 5 Pin Socket Outlet 16 annual periodical maintenance And 6 annual periodical maintenance Multipurpose Independent Using 2.5 Sqmm Copper Conductor Cable (Multi-Strand) Pvc Insulated And Unsheathed Cable And 2.5 Sqmm Copper (Multistrand) Pvc Insulated And Unsheathed Earth Wire With Pvc Boxes Complete All As Specified. , M&L For Point Wiring For One Socket Outlet 16 annual periodical maintenance On Independent Board With 4 Sq Mm (Nominal Area), Pvc Insulated Unsheathed (Frlsh), 1100 Volts Grade, Multi-Stranded Copper Conductor, In And Including Pvc Casing Capping Of Adequate Size With All Fittings And Accessories Including Pvc Boxes For Housing The Switches ( Make Of Box Prestoplast,Prestoteak), Including Pvc Insulated And Unsheathed (Frlsh)Single Core Multi-Stranded Copper Conductor Cable Of Size 4 Sq Mm Green In Colour As Earth Continuity Conductor Connected To Common Earth Dolly Complete All As Specified And Directed. , S&F Socket Outlet 2 In 1, 5 Pin, 5 annual periodical maintenance Flush Type , S&F Socket Outlet 2 In 1, 5 Pin, 5 And 15 annual periodical maintenance Flush Type , Supply & Fixing Switch Piano Flush Type (Isi Marked), Single Pole, One Way 15 Amp, 240 Volts Complete All As Specified & Directed. , Supply And Fixing In Replacement Of Ceiling Rose, Surface Bakelite, 65Mm X 50Mm , Two To Three Terminals Complete All As Specified & Directed. , Supply & Fixing Switch Piano Flush Type (Isi Marked), Single Pole, One Way 5 Amp, 240 Volts Complete All As Specified & Directed. , S&F Bell/Buzzer Push 5/6 Amp,Flush Type Complete All As Specified & As Directed. , S&F Call Bell Ding Dong Electric Ac, 240 Volt, 50 Hz, Surface Type Complete All As Specified & As Directed. , Supply And Fixing Lamp Holder, Insulated Body With Pack Plate Suitable Batten Fitting On Wall Duly Grouted/Fixed In Solid Block Wall Or On Wooden Board Complete All As Specified And Directed. , Supply & Fixing Modular Switch 1 Way 6A,1 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Switch 1 Way 16A,1 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Socket, 6A - 5 Pin Combined 2 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Socket 6A/16A - 5 Pin Combined 2 Module, 240 Volts Complete All As Specified & Directed. , S&F Modular White Cover Plate With Frame 03 Module , S&F Modular White Cover Plate With Frame 04 Module , S&F Modular White Cover Plate With Frame 06 Module , S&F Modular Surface Mounted Plastic Flush Box 3 Module , S&F Modular Surface Mounted Plastic Flush Box 4 Module , S&F Modular Surface Mounted Plastic Flush Box 6 Module , Supply And Fixing Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed. , Supply And Fixing Led Light Fitting With High Out Put Diffuser 4 Feet, 20 Watt 220 V Ac Decorative Type With Driver Holder Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Led Tube Rod With High Out Put Diffuser 4 Feet,20 Watt 220 V Ac Decorative One Side Connection Type With Driver Holder Complete All Asspecified & Directed. , Supply And Fixing Led Batten, 220V, Ac Decorative Box Type With Holder Suitable For Fixing Led Tube Light 20/22 Watt Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Warm White) 220 V Ac With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Sitecomplete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Cool Day Light) 220 V Ac With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Sitecomplete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Downlighter Round 18 W (White/Warm White) Type & Driver Incl Integrated Electronic Driver Including Taking Down Old Unsv One Complete All As Specified And Directed , S&F In Replacement Downlighter Surface Mounted Square 1X1 Type 18 W (White/Warm White) Type & Driver Incl Integrated Electronic Driver Including Taking Down Old Unsv One Complete All As Specified And Directed , S&F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light Made Up Of Innovative Die Cast Aluminium Housing High Power Led As Lighting Source With Ip - 66 Power Consumption 35 Watt Complete Input Voltage Of 150-240 Volt (Nominal Rated Voltage 240 Volt) Complete Including Twisted 3 Core Copper Cable Of Size 1.5 Sqmm Dia For Connecting Phase, Neutral And Earth From Ceiling Rose To Light Length As Required At Site,Gi Bracket 25 Mm Dia Pipe And 02 Numbersclmaps, All Fixing Arrangements Such As Fastners, Bilts, Nuts Washers Etc All As Specified And Directed. , S&F In Replacement Led Bulkhead Fitting 10 Watt (Endura Ruby) With All Accessories And Including Connenting Up With Twin Core Twisted With Flexible Copper Conductor Cable With Suitable Size Of 230 Volts , 50 Hz Complete All As Spicified And Directed. , S&F Led Rechargeable Lamp 12 Watt, Cdl, B-22 Cap, (Pin Type), 230W, providing fixing Not Less Tha 0.85 (Min) Complete All As Specified And Directed. , S&F Wire For Circuit/Sub Main Wiring With 1100 Volts Grade Double Core Pvc Insulated And Unsheathed Cable With Multistranded Copper Conductor 4 Sqmm, On Surface Or Recessed Or Drawn In Pvc Casing Capping/Pvc Pipe Along With 4 Sqmm Single Core Copper Conductor Multi Stranded Cable As Earth Continuity Conductor Complete All As Specified And As Directed.(Note: One Rm Pvc Casing Capping/Pvc Conduit ,One Run Of 4 Sqmm Earth Wire And 2 Run Of 4 Sqmm Cable Shall Be Measured As One Run.) , S&F Wire For Circuit/Sub Main Wiring With 1100 Volts Grade Double Core Pvc Insulated And Unsheathed Cable With Multistranded Copper Conductor 6 Sqmm, On Surface Or Recessed Or Drawn In Pvc Casing Capping/Pvc Pipe Along With 6 Sqmm Single Core Copper Conductor Multi Stranded Cable As Earth Continuity Conductor Complete All As Specified And As Directed.(Note: One Rm Pvc Casing Capping/Pvc Conduit ,One Run Of 6 Sqmm Earth Wire And 2 Run Of 6 Sqmm Cable Shall Be Measured As One Run.) , Material & Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600X600x6 Mm Thick Buried Directly In Ground (Earth Pit Not Less Than 2.25M Deep Below The Ground Level) With Top Edge Of The Plate Not Less Than 1.5Mtr Below The Normal Ground Level Connected To Galvanised Wire 4Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanised Iron.Earth Wire Protected By Gi Pipe 15 Mm Bore(Medium Grade) And Connected To Main Switch Board Or Main Control Board As Directed And As Specified And Shown In Electrical Plate No. 3 Of Ssr Part I (2009) Including Necessary Concrete Pit In Plain Cement Concrete (1:3:6) Type C1, Pre-Cast Reinforced Cement Concrete (1:2:4) Type B1 Cover Slab 40 Cm X 40Cm X 5Cm Reinforced With 8Mm Dia Tmt Bars @ 15Cm C/C With One Handle For Lifting Made Out Of 8Mm Dia Bar, Funnel, Wire Mesh, 20Mm Dia Gi Pipe Medium Grade For Watering, Charcoal Or Coke And Salt In Alternate Layers Including Necessary Excavation And Earth Work In Any Type Of Soil And Testing Complete All As Directed By Engineer-In-Charge. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 8 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed To Wall On Pvc Board Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 4 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed To Wall On Pvc Board Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 4 Way 200 annual periodical maintenance Rated Busbar Triple Pole And Neutral Fixed To Wall On Pvc Board Complete All As Specified And Directed. , S&F Mcb Tpn Having Braking Capacity 10Ka, 63 Amps, 240 V Complete All As Specified And Directed. , S&F Mcb Spn Having Braking Capacity 10Ka, 32 Amps, 240 V Complete All As Specified And Directed. , S&F Mcb Sp Having Braking Capacity 10Ka, 6 To 32 Amps, 240 V Complete All As Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 63/100 Amps With Ultimate Breaking Capacity 16 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 125 Amps With Ultimate Breaking Capacity 16 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S&F In Replacement Of Distribution Board Vertical Type Tpn 415 Volt For Fixing 4 Pole Mccb, Double Door Ip 43 Protection, 4 Way With Copper Bus Bars, Neutral Links , Earth Link, Earthing Studs, Blanking Plates, Interconnection Between Incomer Mccb And Bus Bar Duly Prewired Fixed Flush To Wall / Other Surface Complete All As Specified And As Directed. , S&F Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb Of Capacity 20A Complete All As Specified And Directed , Taking Down Of Defective Geyser Of Any Capacity From Different Locations For Repair Including Removing Of Electric Connection, Pipe Fitting Without Any Damage And Refixing The Same After Repair In Same/Desired Location Complete All As Specified & Directed. Note :- The Parts Required For Repair Shall Be Measured Separately Under Relevent Item , S&F Copper/Ss Body Inner Shell Suitable For Water Storage Heater (Geyser) Of 50 Ltr Capacity As Per Sample Including Taking Down Old Unsv Steel/Copper Tank Complete All As Specified And As Directed , S&F Outer Body Of Water Storage Heater (Geyser)Of 50 Ltr Capacity As Per Sample Including Taking Down Old Unsv Outer Body Complete All As Specified And As Directed , S&F Copper/Ss Body Inner Shell Suitable For Water Storage Heater (Geyser) Of 25 Ltr Capacity As Per Sample Including Taking Down Old Unsv Steel/Copper Tank Complete All As Specified And As Directed , S&F Outer Body Of Water Storage Heater (Geyser)Of 25 Ltr Capacity As Per Sample Including Taking Down Old Unsv Outer Body Complete All As Specified And As Directed , M&L For Glass Wool Packing Required For Cover The 25/50 Ltrs Copper Inner Shell To Avoid The Heat Conduction Including Taking Out Old Packing All As Specified & Directed. , S&F Heating Coil 1500 Watt In Existing Storage Water Heater(Geyser) Suitable For 25 Ltrs Capacity All As Specified & Directed. , S&F Heating Coil 2000 Watt In Existing Storage Water Heater(Geyser) Suitable For 25/50 Ltrs Capacity All As Specified & Directed. , S&F Thermostat Range Of 30-80 Degree, As Per Site Requirement, Size As Per Sample All As Specified & Directed. , S&F Non Return Valve Brass Suitable Of 15 Mm Dia Including Taking Down All As Specified & Directed. , S&F Indicator Lamp Red/Green Colour Suitable For Storage Water Heater Any Capacity All As Specified & Directed. , S&F Steel Pipe Connection 45 Cm Long Both End Brass Suitable For Hot Water Supply And Screw Down 15 Mm Gi Pipe Complete All As Specified & Directed. , S&F Steel Pipe Connection 60 Cm Long Both End Brass Suitable For Hot Water Supply And Screw Down 15 Mm Gi Pipe Complete All As Specified & Directed. , M&L For Replacement Of 12 X 100 Mm Bolts Grouting In Bricks Masonary Wall With 1:4 Cm For Mounting Geyser All As Specified & Directed. , S&F Geyser Base Plate Front & Rear Suitable For Existing Geyser Of Capacity 25/50 Ltrs Complete All As Specified & Directed. , S & F Incl Leakage Testing Galvanised Steel Water Tubing Medium Grade 15 Mm Dia Bore With All Fittings Such As Bends, Elbow, Socket, Reducer Etc, Laid Under Floor / Trenches All As Specified & Directed. , S&F 15Mm Bib Tap Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed All As Specified & As Directed By Engr-In-Charge. , Taking Down Of Defective Exhaust Fan Any Capacity/Make/Model/Size From Its Original Locations For Repair Including Sealing Of Cable End , Dismantling Blades, Clamps With Bush, Louvers & Motors, Refixing The Same After Repair & Assembling Complete Set In Same Location Etc Including Testing Complete All As Specified & Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Suitable For Exhaust Fan 200 Mm Sweep Plastic Body. , S&F In Repair/Replacement Of Fan Blade Suitable For Exhaust Fan 200 Mm Sweep Plastic Body. , S&F In Repair/ Replacement Of Old Unservisable Of Frame Made With Engineering Plastic Complete Suitable For 200 Mm Exhaust Fan Plastic Body White Colour All As Directed , Supply Only Louvers Suitable For Exhaust Fans 225/230 Mm Sweep. , Supply Only Louvers Suitable For Exhaust Fans 300Mm Sweep. , Supply Only Louvers Suitable For Exhaust Fans 450Mm Sweep. , S&F In Repair/Replacement Of Exhaust Fan Motor Metal Body Suitable For Exhaust Fans 300 Mm Sweep. , S&F In Replacement Of Old Unservisable Of Frame With Three/Four Legs Suitable For 300 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , S&F In Replacement Of Old Unservisable Of Fan Blade With Split Pin Suitable For 300 Mm Exhaust Fan Of Smoke Grey Colour All As Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Metal Body Suitable For Exhaust Fans 450 Mm Sweep. , S&F In Replacement Of Old Unservisable Of Frame With Three/Four Legs Suitable For 450 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , S&F In Replacement Of Old Unservisable Of Fan Blade With Split Pin Suitable For 450 Mm Exhaust Fan Of Smoke Grey Colour All As Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Metal Body Suitable For Exhaust Fans 225/230 Mm Sweep , S&F In Replacement Of Old Unservisable Of Frame With Three Legs Suitable For 225/230 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , S&F In Replacement Of Old Unservisable Of Fan Blade With Split Pin Suitable For 225/230 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , Supplying, Laying, Jointing & Testing Cable Xlpe Insulated Screened Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables (Heavy Duty) With Stranded Aluminum Conductor, 1100 Volts Grade, Of Size 16 Sqmm 4 Core As Per Is 7098 Pt-Ii Laid In Trenches / Ducts / Encased In Gi Pipe / Fixed To Pole Complete All As Directed And Specified. , Description All As Per Item No 82 Above But Of Size 16 Sqmm 2 Core , Taking Down Point Wiring Carefully Copper/ Aluminum (Light,Fan, Socket Or Power) Complete (Fittings Such As Switches Ceiling Rose, Pendents, Regulators, Sockets Etc) , Taking Down Main Switches, Dbs Alongwith Existing Board And Removing The Same From The Site And Making Good The Disturb Surfaces / Portion Of The Wall Etc All Specified And Directed By Eic. , Excavation In Trenches In Any Type Of Soil Not Exc 1.5 Mtrs Wide And Not Exc 1.5 Mtr In Depth For Laying Of Pipe/ Cables/ Poles Etc And Getting Out Any Type Of Soil Complete All As Specified And As Directed. , Returning Fitting In Any Type Of Soil Including Spreading Leveling Watering And Well Ramming In Layers N.Exc 25 Cm Complete All As Specified And As Directed. , Removing Excavated Soils To A Distance N.Exc. 50 Mtr And Depositing Where Directed At A Level Not Exc 1.5 M Above The Starting Point Complete All As Specified And As Directed. , M & L For Laying Of Fine, Clean Sand (River Sand) Free From Sharp Materials And Stone Particals In Trenches For Cushioning Of Cable 8 Cm Thick Under Cable And 15 Cm Thick Over The Cable Including Gently Punning Complete All As Specified And Directed. Note:- The Total Thickness Of Sand Shall Be Measured 18 Cm After Punning. , Supply And Laying Un-Reinforced Precast.Concrete Cable Protection Cover Of Class Lv, Type-1, Flat Size 250Mm X 150Mm X 40 Mm, Local Made Super Quality Complete All As Specified And Directed. , Supply And Laying Galvanised Tube Light Grade Isi Marked Of Size 40 Mm Dia Incl All Fittings In Trenches/Fixed On Pole/Wall/Floor Or Laid In Position Including Repairing Of Demolished Cemented Portion Complete All As Specified And Directed. , S&F Led Driver Suitable For 18W Led Light Complete All As Specified And Directed. , S&F Led Driver Suitable For 36W Led Light Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
25.
Defence #11162654 Technical Bid
Tender for Material & Labour For Light/Fan Point Wiring With 1.5 Sq Mm (Nominal Area), Pvc Insulated Unsheathed (Frlsh), 1100 Volts Grade, Multi-Stranded Copper Conductor, In And Including Pvc Casing Capping Of Adequate Size With All Fittings And Accessories Including Pvc Boxes For Housing The Switches ( Make Of Box Prestoplast,Prestoteak), Including Pvc Insulated And Sheathed (Frlsh)Single Core Multi-Stranded Copper Conductor Cable Of Size 1.5 Sq Mm Green In Colour As Earth Continuity Conductor Connected To Common Earth Dolly Complete All As Specified And Directed. , All As Per Item No. 1 Here In Before But For One 3 Pin Socket Outlet 5/6 Amps Three Pin Controlled By One Switch On Independent Board Complete All As Specified And Directed. , All As Per Item No. 1 Here In Before One 3 Pin Socket Outlet, 5/6 Amps On The Same Board With Other Switches, With Cables 1.5Sq. Mm Size Complete All As Specified And Directed. , All As Per Item No. 1 Here In Before But For One 5 Pin Socket Outlet 15/16 annual periodical maintenance And 5/6 annual periodical maintenance Multipurpose Independent Using 2.5 Sqmm Copper Conductor Cable (Multi-Strand) Pvc Insulated And Unsheathed Cable And 2.5 Sqmm Copper (Multistrand) Pvc Insulated And Unsheathed Earth Wire With Pvc Boxes Complete All As Specified. , All As Per Item No. 1 Here In Before One Light Point Controlled By Two Two-Way Switch 5/6 annual periodical maintenance Complete All As Specified And As Directed . , All As Per Item No. 1 Here In Before One Bell/Buzzer Point Controlled By One Bell Push Complete All As Specified And As Directed . , Supply & Fixing Switch Piano Flush Type (Isi Marked), Single Pole, One Way 5/6 Amp, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Switch Piano Flush Type (Isi Marked), Single Pole, One Way 15/16 Amp, 240 Volts Complete All As Specified & Directed. , S&F Socket Outlet 2 In 1, 5 Pin, 5/6 annual periodical maintenance Flush Type , S&F Socket Outlet 2 In 1, 5 Pin, 5/6 And 15/16 annual periodical maintenance Flush Type , S&F Switch Socket Combination 2 In 1, 5 Pin, 5/6 And 15/16 annual periodical maintenance Flush Type Universal Complete All As Specified And Directed. , S&F Switch Socket Combination 2 In 1, 5 Pin, 5/6 annual periodical maintenance Flush Type Universal Complete All As Specified And Directed. , S&F Switch Socket Combination With Box 2 In 1, 5 Pin, 5/6 And 15/16 annual periodical maintenance Flush Type Universal Complete All As Specified And Directed. , S&F Switch Socket Combination With Box 2 In 1, 5 Pin, 5/6 annual periodical maintenance Flush Type Universal Complete All As Specified And Directed. , Supply Only Pvc Self Adhesive Insulation Tape Multi Colour Of 12.5 Mm Thick For Electric Wire Complete All As Specified And Directed. , S&F Led Driver Single Phase Input Voltage 220 Volt-240 Volt Ac 50 Hz, providing fixing Not Less Than 0.95, Suitable For 36/20/15 Watt Led Light As Per Site Requirement Complete All As Specified And Directed. , Supply And Fixing In Replacement Of Ceiling Rose, Surface Bakelite, 65Mm X 50Mm , Two To Three Terminals Complete All As Specified & Directed. , S&F Bell/Buzzer Push 5/6 Amp,Flush Type Complete All As Specified & As Directed , S&F Call Bell Ding Dong Electric Ac, 240 Volt, 50 Hz, Surface Type Complete All As Specified & As Directed. , Supply & Fixing Modular Switch 1 Way 6A,1 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Switch 1 Way 16A,1 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Socket, 6A - 5 Pin Combined 2 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Socket 6A/16A - 5 Pin Combined 2 Module, 240 Volts Complete All As Specified & Directed. , S&F Modular White Cover Plate With Frame 02 Module , S&F Modular White Cover Plate With Frame 03 Module , S&F Modular White Cover Plate With Frame 06 Module , S&F Modular Metal Flush Box 1/2 Module , S&F Modular Metal Flush Box 3 Module , S&F Modular Metal Flush Box 6 Module , Supply And Fixing Led Light Fitting 4 Feet (Cool White) 1 X 20 Watt 220 Volt Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Size From Ceiling Rose Complete All As Directed. , Supply And Fixing Led Light Fitting 4 Feet ( Warm White ) 1 X 20 Watt 220 Volt Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Size From Ceiling Rose Complete All As Directed. , Supply And Fixing Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Led Tube Rod 4 Feet,20 Watt 220 V Ac Complete All As Specified & Directed. , Supply And Fixing Of Batten Suitable For Fixing Led Lights 20 Watt, 220V, Ac With Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , S&F Downlighter Round 18 W (White/Warm White) Recess Mounting Type & Driver Of Various Sizes As Per Site Requirement Incl Integrated Electronic Driver Including Taking Down Old Unsv One Complete All As Specified And Directed , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Cool White) Surface Mounting Type With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Site Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Warm White) 220 V Ac Surface Mounting Type With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Site Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Cool White) 220 V Ac Recessed Mounting Type With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Site Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Warm White) 220 V Ac Recessed Mounting Type With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Site Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F Led Lamp 5 Watt, 230W, B-22, providing fixing Not Less Than 0.85 (Min). , S&Fled Lamp 9 Watt, Cool White/Warm White, 230W, B-22 , providing fixing Not Less Tha 0.85 (Min) Complete All As Specified And Directed. , S&F Led Lamp 12 Watt, Cool White/Warm White, 230W, B-22 , providing fixing Not Less Tha 0.85 (Min) Complete All As Specified And Directed. , S&F Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light Made Up Of Innovative Die Cast Aluminium Housing High Power Led As Lighting Source With Ip - 66 Power Consumption 45 Watt Complete Input Voltage Of 150-240 Volt (Nominal Rated Voltage 240 Volt) Complete All As Specified And Directed. , S&F Led Bulkhead Fitting 10 Watt (Endura Ruby) With All Accessories And Including Connenting Up With Twin Core Twisted With Flexible Copper Conductor Cable With Suitable Size Of 230 Volts , 50 Hz Complete All As Specified And Directed. , S&F In Repair Supply And Fixing Post Top Lantern Led Type 20 Watt 230 Watt Volts Ac Outdoor Type With Decorative Post Top For 360 Degree Indirect Light Ip 65 Protection With Impact And Corrosion Resistant Complete With Driver And Lamp Complete All As Specified And Directed.Model No Rubyminipt15wled830psymtopc , S&F Decorative Garden Light Pressure Die Cast Powder Coated Housing With Pc Diffuser Efficient High Output Led With Ip 65 Protecton Of Capacity 10 Watt (Cdl/Ww) With All Accessories And Including Connection Up With Twin Core Twisted With Flexible Copper Conductor Cable Suitable Size Of 230 Volts 50 Hz Complete All As Specified And Directed. , Supplying, Laying, Jointing & Testing Cable Xlpe Insulated Screened Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables (Heavy Duty) With Stranded Aluminum Conductor, 1100 Volts Grade, Of Size 25 Sqmm 4 Core As Per Is 7098 Pt-Ii Laid In Trenches / Ducts / Encased In Gi Pipe / Fixed To Pole Complete All As Directed And Specified. , Supplying, Laying, Jointing & Testing Cable Xlpe Insulated Screened Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables (Heavy Duty) With Stranded Aluminum Conductor, 1100 Volts Grade, Of Size 16 Sqmm 4 Core As Per Is 7098 Pt-Ii Laid In Trenches / Ducts / Encased In Gi Pipe / Fixed To Pole Complete All As Directed And Specified. , S&F In Replacement Of 1100 Volts Grade Heavy Duty Isi Marked Cable Pvc Insulated Stranded Aluminium Conductor One Twin Core Cable Flat Or Circular Of Size 16 Sqmm Served With Inner Sheathing Of Pvc Tape & Overall Pvc Sheathed In Service Connections Complete All As Specified And Directed. , Description All As Per Item No. 49 Above But One Twin Core Cable Flat Or Circular Of Size 10 Sqmm Complete All As Specified And Directed. , Description All As Per Item No. 49 Above But One Twin Core Cable Flat Or Circular Of Size 6 Sqmm Complete All As Specified And Directed. , Description All As Per Item No. 49 Above But One Twin Core Cable Flat Or Circular Of Size 4 Sqmm Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 4 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed On Wall Duly Grouted In Solid Block Wall Or On Wooden Board Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 8 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed On Wall Duly Grouted In Solid Block Wall Or On Wooden Board Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 12 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed On Wall Duly Grouted In Solid Block Wall Or On Wooden Board Complete All As Specified And Directed. , S&F Mcb Spn Having Braking Capacity 10Ka, 32 Amps, 240 V Complete All As Specified And Directed. , S&F Mcb Sp Having Braking Capacity 10Ka, 6 To 32 Amps, 240 V Complete All As Specified And Directed. , S&F Mcb Tpn 63 Amps 415 V Complete All As Specified And Directed. , S&F Mcb Tp 40 Amps 415 V Complete All As Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 63/100 Amps With Ultimate Breaking Capacity 16 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 125 Amps With Ultimate Breaking Capacity 16 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 160 Amps With Ultimate Breaking Capacity 36 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S&F Mccb Dbs Vtpn Type Double Door In Wall / Nitch When Mcbbs ,To Be Used Four Pole And Neutral, 8 Way,415 Volt With Rated Bus Bar ,Suitable For Flush Mounting And Surface Mounting With 160 Amps Copper Bus Bar For Each Phase And 2 Neutral Bar, 2 Earth Bar, And Cable Ties For Cable Managent,Fully Insulated Busbar And Shrouded Neutral Bar ,Improved Pan Assembly For Ease Of Installation ,Prefitted Masking Sheet, Reversible Door For Ip 43 &Ip 54 Dbs With Provision For Dpx3 160 Mccb As Incomer, And Tpn /Spn/Dp/Sp Out Going . Complete All As Specified And Directed. Ip :54 Protection , Excavation In Trenches In Any Type Of Soil Not Exc 1.5 Mtrs Wide And Not Exc 1.5 Mtr In Depth For Laying Of Pipe/ Cables/ Poles Etc And Getting Out Any Type Of Soil Complete All As Specified And As Directed. , Returning Fitting In Any Type Of Soil Including Spreading Leveling Watering And Well Ramming In Layers N.Exc 25 Cm Complete All As Specified And As Directed. , Removing Excavated Soils To A Distance N.Exc. 50 Mtr And Depositing Where Directed At A Level Not Exc 1.5 M Above The Starting Point Complete All As Specified And As Directed. , M & L For Laying Of Fine, Clean Sand (River Sand) Free From Sharp Materials And Stone Particals In Trenches For Cushioning Of Cable 8 Cm Thick Under Cable And 15 Cm Thick Over The Cable Including Gently Punning Complete All As Specified And Directed. Note:- The Total Thickness Of Sand Shall Be Measured 18 Cm After Punning. , Supply And Laying Un-Reinforced Precast.Concrete Cable Protection Cover Of Class Lv, Type-1, Flat Size 250Mm X 150Mm X 40 Mm, Factory Made Of Specified Make , Complete All As Specified And Directed. , Supply And Laying Galvanised Tube Light Grade Isi Marked Of Size 40 Mm Dia Incl All Fittings In Trenches/Fixed On Pole/Wall/Floor Or Laid In Position Including Repairing Of Demolished Cemented Portion Complete All As Specified And Directed. , Supply And Fix In Replacement Electronic Meters Single Phase Temper Proof Lcd Display With Polycarbonate Cover 230 V, 10-60Amp, Accuracy Class-I 50Hz, Conforming To Is 13779, Ip-54, With Parameters To Show Data, Time, Current Reading, Load, Pf, Voltage And Kwh Complete All As Specified And Directed. , Taking Down Of Defective Geyser Of Any Capacity From Different Locations For Repair Including Removing Of Electric Connection, Pipe Fitting Without Any Damage And Refixing The Same After Repair In Same/Desired Location Complete All As Specified & Directed. Note :- The Parts Required For Repair Shall Be Measured Separately Under Relevent Item Of Sch A , S&F Copper/Ss Body Inner Shell Suitable For Water Storage Heater (Geyser) Of 25 Ltr Capacity As Per Sample Including Taking Down Old Unsv Steel/Copper Tank Complete All As Specified And As Directed , S&F Outer Body Of Water Storage Heater (Geyser)Of 25 Ltr Capacity As Per Sample Including Taking Down Old Unsv Outer Body Complete All As Specified And As Directed , M&L For Glass Wool Packing Required For Cover The 25 Ltrs Copper Inner Shell To Avoid The Heat Conduction Including Taking Out Old Packing All As Specified & Directed. , S&F Heating Coil 2000/1500 Watt (Round/Trinangle Type) In Existing Storage Water Heater(Geyser) Suitable For 25 Ltrs Capacity All As Specified & Directed. , S&F Thermostat Range Of 30-80 Degree, As Per Site Requirement, Size As Per Sample All As Specified & Directed. , S&F Non Return Valve Brass Suitable Of 15 Mm Dia Including Taking Down All As Specified & Directed. , S&F Steel Pipe Connection 60 Cm Long Both End Brass Suitable For Hot Water Supply And Screw Down 15 Mm Gi Pipe Complete All As Specified & Directed. , M&L For Replacement Of 12 X 100 Mm Bolts Grouting In Bricks Masonary Wall With 1:4 Cm For Mounting Geyser All As Specified & Directed. , M&L Base Plate Suitable For Hanging Of Geyser Of Capacity 25 Ltr , Taking Down Of Defective Exhaust Fan Any Capacity/Make/Model/Size From Its Original Locations For Repair Including Sealing Of Cable End , Dismantling Blades, Clamps With Bush, Louvers & Motors, Refixing The Same After Repair & Assembling Complete Set In Same Location Etc Including Testing Complete All As Specified & Directed , M&L For Rewinding Of Exhaust Fan Motor 150/225/230/250 Mm Sweep 240 Volt Ac After Dismantling Complete Motor Assay, Bearning, Bushings, Removal Of Burnt Copper Wire, Cleaning Of Core Inserting Proper Insulating Paper In Slots Winding With Copper Wire As Per Existing Gauge And Assemble Complete Set Complete All As Specified And Directed , M&L For Rewinding Of Exhaust Fan Motor 300/450 Mm Sweep 240 Volt Ac After Dismantling Complete Motor Assay, Bearning, Bushings, Removal Of Burnt Copper Wire, Cleaning Of Core Inserting Proper Insulating Paper In Slots Winding With Copper Wire As Per Existing Gauge And Assemble Complete Set Complete All As Specified And Directed , S&F In Repair/Replacement Fan Blade Suitable For Exhaust Fan 150/225/230/250 Mm Sweep Metal/Plastic Body , S&F In Repair/Replacement Fan Blade Suitable For Exhaust Fan 300/450 Mm Sweep Metal Body . , S&F In Repair/Replacement Ball Bearing Of Exhaust Fan Of 150/225/230/250 Mm Sweep As Per Existing Type Complete All As Specified And Directed , S&F In Repair/Replacement Ball Bearing Of Exhaust Fan Of 300/450 Mm Sweep As Per Existing Type Complete All As Specified And Directed , S&F In Repair/Replacement Capacitor Of Cap 1/1.5/3.15 Mfd Sutitable For Exhaust Fan Of 150/225/230/250/300/450 Mm Sweep As Per Existing Type Complete All As Specified And Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Suitable For Exhaust Fans 150/225/230/250 Mm Sweep Plastic/Metal Body. , S&F In Repair/Replacement Of Exhaust Fan Motor Suitable For Exhaust Fans 300/450 Mm Sweep Metal Body. , Material & Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600X600x6 Mm Thick Buried Directly In Ground (Earth Pit Not Less Than 2.25M Deep Below The Ground Level) With Top Edge Of The Plate Not Less Than 1.5Mtr Below The Normal Ground Level Connected To Galvanised Wire 4Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanised Iron.Earth Wire Protected By Gi Pipe 15 Mm Bore(Medium Grade) And Connected To Main Switch Board Or Main Control Board As Directed And As Specified And Shown In Electrical Plate No. 3 Of Ssr Part I (2009) Including Necessary Concrete Pit In Plain Cement Concrete (1:3:6) Type C1, Pre-Cast Reinforced Cement Concrete (1:2:4) Type B1 Cover Slab 40 Cm X 40Cm X 5Cm Reinforced With 8Mm Dia Tmt Bars @ 15Cm C/C With One Handle For Lifting Made Out Of 8Mm Dia Bar, Funnel, Wire Mesh, 20Mm Dia Gi Pipe Medium Grade For Watering, Charcoal Or Coke And Salt In Alternate Layers Including Necessary Excavation And Earth Work In Any Type Of Soil And Testing Complete All As Directed By Engineer-In-Charge. , S&F Wire For Circuit/Sub Main Wiring With 1100 Volts Grade Double Core Pvc Insulated And Unsheathed Cable With Multistranded Copper Conductor 4 Sqmm, On Surface Or Recessed Or Drawn In Pvc Casing Capping/Pvc Pipe Along With 4 Sqmm Single Core Copper Conductor Multi Stranded Cable As Earth Continuity Conductor Complete All As Specified And As Directed.(Note: One Rm Pvc Casing Capping/Pvc Conduit ,One Run Of 4 Sqmm Earth Wire And 2 Run Of 4 Sqmm Cable Shall Be Measured As One Run.) , S&F Wire For Circuit/Sub Main Wiring With 1100 Volts Grade Double Core Pvc Insulated And Unsheathed Cable With Multistranded Copper Conductor 6 Sqmm, On Surface Or Recessed Or Drawn In Pvc Casing Capping/Pvc Pipe Along With 6 Sqmm Single Core Copper Conductor Multi Stranded Cable As Earth Continuity Conductor Complete All As Specified And As Directed.(Note: One Rm Pvc Casing Capping/Pvc Conduit ,One Run Of 6 Sqmm Earth Wire And 2 Run Of 6 Sqmm Cable Shall Be Measured As One Run.)
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 1.10 Lakh
Government Departments No of Bidders 4
Madhya Pradesh View Result →
27.
Tourism #11099606 AOC
Tender For Civil Works , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directedwithin A Lead Of 50M.All Kinds Of Soil , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : All Works Upto Plinth Level , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For :Foundations, Footings, Bases For Columns , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-20 Grade Of Concrete , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Electrical Work , Supply Of 6M Decorative Single Arm Cameroon Pole With 72W Sabik Ø480mm Crown Tm Pc:- 6M Height Designer Decorative Single Arm Pole Made In Combination Of Steel Pipe Which Is Fabricated Using 114 Mm(+/-3%)Dia Grooved Pipe X 4Mm Thick Base Section With Minimum Height Of 2000Mm. The Pole Is To Be Provided With A Surface Mounting Suitable Base Plate Dia Of 350 Mm And Suitable Thickness As Per Is Standards And Structural Reports. Decorative Knob On The Top Is Made Of Cast Aluminium In Single Piece Of Minimum Height 360Mm. The Pole Should Be Provided With An Inbuilt Junction Box To Fix Four-Way Connector And 6A Mcb At The Bottom - The Inbuilt Box Should Have A Flush Door Of Suitable Size. The Decorative Pedestal To Be Mounted On A Suitable Size Steel Plate. The Pole Shall Be Hot Dip Galvanized. . The Suitable Size Foundation Bolt Shall Be Supply Along With The Pole Of En 8 Grade. The Manufacturer Needs To Provide A Structural Analysis For Structural Stability Of The Pole With The Relevant Is Standards Is 1239/1161/E250 Needs To Be Clearly Mentioned. The Same Needs To Be Confirmed In Form Of Test Certificates From The Manufacturer. Internal Wiring Backelite Sheet And Mcb Included Please Refer The Attached Drawing No - Cameroon 6M Sa Tm Pole. Including 72W Post Top Fixture Suitable To Mount 72W ± 10% With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. The Led Used Should Be High Power Epoxy Leds (Make- Osram/Bridgelux/Nichia/Cree) With Macadam /= 5 And Cri /= 70 And Cct 4000K. The Luminaire Should Have System Efficacy (Lumens/Watt) 110 Lumens/Watt. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Internal Testing Equipments Especially 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report For Led Used In The Fixtures. Similar To Model No. Sabik Ø480mm Crown Tm Pc Clear Sl. The Luminaire Should Be Rohs Compliant As Per Government Notification And With A Valid Bis Number. Luminaire Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Street Light Panel: Supply Installation Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 63A Tpn Mcb As Incommer And 11 Nos Of 16 A Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based 25 A Programmable Digital Almac Timer As Directed By Engineer In-Charge. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 36W And System Lumen Output Of Not Less Than 2910 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Reytek, Leksa, La-Lumirie,Phillips,Havells As Directed By The Engineer Incharge. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 18W And System Lumen Output Of Not Less Than 1490 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 500Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 12W And System Lumen Output Of Not Less Than 980 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 36W And System Lumen Output Of Not Less Than 3020 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 18W And System Lumen Output Of Not Less Than 1550 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of Static White 3000K Neon Flex With Diffused And Homogenous Light Suitable For Outdoor Applications Of Façade Lighting. Silicon Extrusion Flexible Tubes With Side Bending Option. Silicon Extrusion Technology Having Advanced Process, With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Additionally, With High Grade Appearance, Soft Bend Flexibility, Strong Impact Resistant And High Weather Resistance. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M. On Field Cuttable And Assembly, With Endcap Sealed By Gluing Process. Power Consumption Should Be Between 12~14W/M And Have Atleast 120 Leds Per Meter With 120° Beam Angle. Ingress Protection Should Be Ip 67. And Ik Rating Ik07. Size 10Mm X20mm Side Bend. Dimmable Available With Pwm Signal. Operating Temperature: -10°C To 45°C. The Fixture Shall Have Input Voltage For 24V Dc, With External High Efficiency Driver Having Power Factor 0.90, Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided. The Lumen Maintenance L70@ 25 °C Of The Led Shall Not Be Less Than 70% Of The Initial Lumen After 30,000 Burning Hours, With Suitable Aluminium Mounting Profile. * Power Supply: Dc 24V * Operating Temperature Range: -10°C To +45°C * Led Make: Cree/ Osram/ Lumiled/ Seoul/ Nichia/Sanan/Epistar Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Installation Testing And Commissioning Of Smart Lighting Panel , Supplyof 3M Decorative Single Arm Cameroon Pole With 72W Sabik Ø480mm Crown Tm Pc:- 6M Height Designer Decorative Single Arm Pole Made In Combination Of Steel Pipe Which Is Fabricated Using 114 Mm(+/-3%)Dia Grooved Pipe X 4Mm Thick Base Section With Minimum Height Of 2000Mm. The Pole Is To Be Provided With A Surface Mounting Suitable Base Plate Dia Of 350 Mm And Suitable Thickness As Per Is Standards And Structural Reports. Decorative Knob On The Top Is Made Of Cast Aluminium In Single Piece Of Minimum Height 360Mm. The Pole Should Be Provided With An Inbuilt Junction Box To Fix Four-Way Connector And 6A Mcb At The Bottom - The Inbuilt Box Should Have A Flush Door Of Suitable Size. The Decorative Pedestal To Be Mounted On A Suitable Size Steel Plate. The Pole Shall Be Hot Dip Galvanized. . The Suitable Size Foundation Bolt Shall Be Supply Along With The Pole Of En 8 Grade. The Manufacturer Needs To Provide A Structural Analysis For Structural Stability Of The Pole With The Relevant Is Standards Is 1239/1161/E250 Needs To Be Clearly Mentioned. The Same Needs To Be Confirmed In Form Of Test Certificates From The Manufacturer. Internal Wiring Backelite Sheet And Mcb Included Please Refer The Attached Drawing No - Cameroon 6M Sa Tm Pole. Including 72W Post Top Fixture Suitable To Mount 72W ± 10% With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. The Led Used Should Be High Power Epoxy Leds (Make- Osram/Bridgelux/Nichia/Cree) With Macadam /= 5 And Cri /= 70 And Cct 4000K. The Luminaire Should Have System Efficacy (Lumens/Watt) 110 Lumens/Watt. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Internal Testing Equipments Especially 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report For Led Used In The Fixtures. Similar To Model No. Sabik Ø480mm Crown Tm Pc Clear Sl. The Luminaire Should Be Rohs Compliant As Per Government Notification And With A Valid Bis Number. Luminaire Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Installation Testing And Commissioning Of Junction Box Including Terminations Of Size 130 X130 X 77 Mm Of Make Hensel , Charges For Installation Testing And Commissioning Of All Light Fixtures Of Façade Illumination Of Shantadurga Temple And Mahamaya Temple. , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core25sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core10sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Supply And Making Cable End Terminations With Compression Gland And Aluminium Lugs For Following Sizes Of Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. (4) 2 X 10Sq.Mm , Supply And Making Cable End Terminations With Compression Gland And Aluminium Lugs For Following Sizes Of Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. (6) 2 X 25Sq.Mm , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs. D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately).(A) In Soily Strata , Supplying And Laying 25 Mm X 5 Mm Gi Strip In 40 Mm Dia Gi Pipe From Earth Electrode As Required , Supply, Installation, Testing & Commissioning Of Diesel Generator Set 25Kva @20 Kwe With Volvo Eicher Engine, Canopy Made Of Composite Polymer-Based Material, Glass Reinforced Polymer (Grp) Acoustic Enclosure Which Can Be Recycled When Replaced Having Canopy Dimension Of 2825X1090x1425mm (Lxwxh) With Total Canopy Weight Not Exceeding 900Kg. Output Continuous Rating 3 Ph, 415V, 50 Hz 0.8 P. F A.C Supply. A Totally Enclosed Water Cooled 4-Cylinder Engine Developing 38 Bhp At 1500 Rpm With 10% Overload For 1Hour In 12 Hours. The Generator Canopy Shall Be Of Non-Metallic, Non-Rusting I.E. Corrosion Free, Weatherproof, Material Suitable For Coastal And High Humidity Conditions. The Dg Set Shall Comply With Cpcb Iv+ Noise Norm With Sound Absorbing Material To Restrict Sound Level Up To 75Db At 1.0M With The Silencer Positioned Inside The Canopy. The Canopy Shall Maintain Certified Sound Level For Minimum Of 15 Years. The Inbuilt Tank Fuel Capacity At 85 Litres & Maximum Fuel Consumption 5.3 Ltr/ Hr @ 75% Loading. The Generator & Panel Canopy Material Shall Contain Fire Resistant, Additives With Self -Extinguishing And Non -Conductive Properties. The Controller Should Be Fixed In Grp Panel Box Having Metal Hinges With Ss Finish Should Be Welded From Inside Of Box Size Of 650X450x200mm With Box Having Powder Coated In Ral9001 Mounted At Rear Side At Height Of 954Mm From Ground Level. The Dg Should Come With Low Vibration As Per Is8528 Part 9 & Should Be Aesthetically Pleasing In Colour Combination Of White & Anthracite Grey For Canopy With Ral9001 -Ral 7016 Respectively With Base Frame Size Of 285Mm Made Up Of 2.5Mm Thickness In Ral 9005 Maintaining 2 Coat Of Primer & 1 Coat Of Painting Process Thickness 80Microns. All The Painting Shall Be Done By Qualified Painters. Reference To Cat No- Grp Pkgvef-Iv25 Paikane Make Or Equivalent. , Supplying And Erecting Outdoor Type 5 To 7 W Led Focus Light Fitting Complete With Ip67, 24Vdc, 60W Driver, / Power Supply (If Any), Connecting Wire, Including Gear Box And Junction Box For Cable Connectionwith All Necessary Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Beam Angle Requirement As Per Gtdc With 3000K Cct Of Suitable Make Wipro,Legero,Bajaj,Jaquar,Vin Led,K-Lite,Philips Complete With All Required Accessories . , Supplying And Erecting 15 W Wall/Column-Mounted Rectangular Type Led Downlight Ip 65 Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,With 3000K Cct Of Suitable Make Wipro,Legero,Bajaj,Jaquar,Vin Led,K-Lite,Philips. Complete With All Required Accessories . , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 40W And System Lumen Output Of Not Less Than 3250 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 24W And System Lumen Output Of Not Less Than 1950 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 15W And System Lumen Output Of Not Less Than 1180Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 40W And System Lumen Output Of Not Less Than 3320 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.-Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 24W And System Lumen Output Of Not Less Than 1950 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 12W And System Lumen Output Of Not Less Than 1550 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of Static White 3000K Neon Flex With Diffused And Homogenous Light Suitable For Outdoor Applications Of Façade Lighting. Silicon Extrusion Flexible Tubes With Side Bending Option. Silicon Extrusion Technology Having Advanced Process, With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Additionally, With High Grade Appearance, Soft Bend Flexibility, Strong Impact Resistant And High Weather Resistance. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M. On Field Cuttable And Assembly, With Endcap Sealed By Gluing Process. Power Consumption Should Be Between 10~14W/M And Have Atleast 120 Leds Per Meter With 120° Beam Angle. Ingress Protection Should Be Ip 67. And Ik Rating Ik07. Size 10Mm X20mm Side Bend. Dimmable Available With Pwm Signal. Operating Temperature: -10°C To 45°C. The Fixture Shall Have Input Voltage For 24V Dc, With External High Efficiency Driver Having Power Factor 0.90, Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided. The Lumen Maintenance L70@ 25 °C Of The Led Shall Not Be Less Than 70% Of The Initial Lumen After 30,000 Burning Hours, With Suitable Aluminium Mounting Profile. * Power Supply: Dc 24V * Operating Temperature Range: -10°C To +45°C * Led Make: Cree/ Osram/ Lumiled/ Seoul/ Nichia/Sanan/Epistar Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supplyof Decorative Post Top Led Luminaire Is Designed With A Robust Die-Cast Aluminium Housing And A Clear Injection Moulded Polycarbonate Diffuser,Ensuring Long Life And Durability Against Outdoor Environmental Conditions. It Features An Ingress Protection Rating Of Ip65 And An Impact Resistance Of Ik08, Making It Both Dust-Tight And Resistant To Heavy Impacts. The Luminaire Is Aesthetically Designed With An Overall Diameter Of 460 Mm And A Height Of 785 Mm, And It Is Suitable For Mounting On A Ø 60 Mm Pole Pipe. Top Cover Made Of Spun Aluminium With Decorative Knob On Top Made Of Die Cast Aluminium As Shown In The Drawing For Unique And Better Aesthetics. The Luminaire Should Have Effective Heatsink For Thermal Management For Longer Life Of The Leds. The Luminaire Shall Be Provided With Type V Optics To Provide Uniform Photometric Distribution Suitable For Typical 360 Degree Illumination And Facilitate Minimum Glare, With Degree Of Protection As Ip65 Lamp Compartment. The Design Of The Fixture Has To Be The Same Aesthetics As Shown In The Drawing. The System Ac Wattage Of The Luminaire Shall Be 45W (± 10%) With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. Colour Temperature (Cct) Of 3000K, Colour Rendering Index Cri /= 70 And Residual Flux Of 70% (L70) @ 50,000 Hours At Ta Of 25°C. The Luminaire Shall Be Suitable For Operating Within Temperature Range From - 10°C To + 45°C. The Led Used Should Be High Power Leds (Make- Osram/Bridgelux/Nichia/Cree/Lumiled) With Macadam /= 5. The Luminaire Should Be Designed To Operate At Any Voltage From 140V To 280V, With Power Factor = 0.95 And Shall Be Provided With Optional Built In Over Voltage And Under Voltage Protection And Internal Surge Protection Of 4/4 Kv In Both Common & Differential Modes And External Surge Protection Of 10 Kv, Electrical Class I. The Driver Arrangement Should Be Such That It Can Be Easily Maintained Without Opening The Ip65 Lamp Compartment. All The Mounting Hardware Shall Be Ss304/316 Grade For Better Life. The Luminaire Shall Comply With Safety Requirements Of Applicable Bis Standard And The Bidder Shall Submit A Copy Of Valid Bis Certificate. Overall Outer Dimensions Of Luminaire Shall Be Ø460mm (±3%) And 785Mmh (±3%) Height And The Shape Shall Be As Per The Sketch Attached Herewith. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Valid Iso 9001:2015. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report Along With The Tender. Similar To Model No. Columba Pt 45W Opal Led 30K . The Luminaire Should Be With A Valid Bis Number. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Charges For Installation Testing And Commissioning Of All Light Fixtures Of Poles And Compund Lights Of Kelbai Temple.
Contract Date: May 31, 2026 Contract Value : 2.23 Crore
Government Departments No of Bidders 3
28.
Educational and Research Institute #11098868 AOC
Tender For Iehe Bhopal Invites Online Tender For Supply Of Sound System In The Institute , Sound System , Wall Mount Cabinet Loudspeaker General Requirements: The Loudspeaker Shall Be A Cost-Effective, 12W General-Purpose Cabinet Speaker Designed For Indoor Surface-Mount Applications. It Must Be Suitable For Both High-Quality Speech Intelligibility And Background Music Reproduction Acoustic Performance: Rated Power: 12W, With Adjustable Power Tappings At 12W, 6W, And 3W To Allow For 3 Db Step Adjustments. Sound Pressure Level (Spl): Must Provide A Maximum Special Of 102.0 Db At 6W/1M (1 Khz) And A Sensitivity Of 91.7 Db At 1W/1M (1 Khz). Frequency Range: The Effective Frequency Range Shall Be From 150 Hz To 15 Khz. Opening Angles: Horizontal: 184° (1 Khz) / 86° (4 Khz). Vertical: 66° (1 Khz) / 58° (4 Khz). Electrical Specifications: Input Voltage: Designed For 100 V Line Systems. Rated Impedance: 833 Ohms. Connection: Shall Feature A 4-Pole Push-In Terminal Block On The Rear Panel For Easy On-Site Wiring And Power Tapping. Durability: The Unit Must Be Tested For 100 Hours Of Continuous Operation At Rated Power In Accordance With Iec 268-5 Standards. Mechanical Construction Enclosure Material: The Main Body Shall Be Constructed From Solid Mdf (Medium Density Fiberboard) Covered In Durable, Easy-To-Clean Black Vinyl. Front Grille: The Front Shall Be Abs Plastic Covered With A Fine Woven Cloth In Matching Black. Baffle Design: Shall Feature An Angled Front Baffle To Optimize Sound Distribution Within The Listening Area. Mounting: The Rear Panel Must Include Three Keyholes For Quick And Secure Wall Mounting. Dimensions: 445 Mm X 151 Mm X 150 Mm / 111 Mm Environmental Limits: Operating Temperature: -5 °C To +55 °C, Storage Temperature: -40 °C To +70 °C , Wireless Microphone System General System Requirements: Classification: The System Shall Be An Entry-Level Professional Wireless Microphone System Designed For Ruggedness And Ease Of Use In Daily Operations. Ease Of Setup: The System Must Include A One-Button Automatic Frequency Scanning Function To Identify The Clearest Available Channel. Transmitter Synchronization Shall Be Achieved Via An Infrared Data Link To Ensure Error-Free Setup. Frequency Management: The System Shall Provide 32 Preset Channels, With Compatible Groups Of Eight Channels For Simultaneous Multi-Channel Use. Operating Bands: The System Shall Be Available In Multiple Rf Frequency Bands, Including: A Band: 618-634 Mhz. B Band: 678-694 Mhz. C Band: 516-532 Mhz. E Band: 850-865 Mhz. Receiver Specifications Type: Synthesized Pll With True Antenna Diversity To Ensure Stable Rf Reception. Chassis: The Receiver Must Feature A True Rack-Mountable Metal Chassis Suitable For Professional Installation. Rf Performance: Sensitivity: 1.0 Μv For 12 Db Sinad. Image Rejection: Greater Than 55 Db. Audio Outputs: Balanced Output: 20 Dbv (Max @ 40 Khz Deviation). Unbalanced Output: Adjustable From 8 Mv To 0.755V Rms. Display: Front-Panel Backlit Lcd Displaying Channel, Frequency, And Battery Status. Handheld Transmitter Construction: The Transmitter Shall Feature A Rugged Metal Body Designed To Withstand The Rigors Of Daily Use. Microphone Capsule: Equipped With A Cardioid Dynamic Capsule (Pl22) For Effective Feedback Control And Ambient Noise Rejection. Battery Life: Must Operate For A Minimum Of 14 Hours Using Two Aa Alkaline Batteries. User Interface: Features A Backlit Lcd Display And A Dedicated Mute Function To Protect The Audio Channel. Bodypack Transmitter Construction: Compact And Rugged Metal Enclosure. Input Connector: Industry-Standard Ta4F Connector For Compatibility With Various Lapel Or Headworn Microphones. Antenna: Flexible External 1/4 Wave Antenna. Acoustic & Environmental Performance System Frequency Response: 80 Hz - 18 Khz ± 2 Db Signal-To-Noise Ratio: 100 Db A-Weighted Total Harmonic Distortion: 1.0%, 0.4% Typical (Ref 1 Khz, 40 Khz Deviation) , Professional Gooseneck Microphone General Requirements: The Microphone Shall Be A Professional-Grade, High-Quality Electret Condenser Gooseneck Microphone Designed For Public Address Applications Such As Lecterns, Podiums, And Open Conferences. It Must Feature A Sleek, Slender, And Unobtrusive Design To Maintain A Clear Line Of Sight For The User. Acoustic & Technical Performance Transducer Type: Electret Condenser. Polar Pattern: Unidirectional (Cardioid) To Ensure High Front-To-Back Rejection, Providing More Gain Before Feedback. Frequency Response: Wide Range From 20 Hz To 18,000 Hz. Sensitivity: 7.5Mv/Pa Power Requirement: Operable Via A Dc Power Source Ranging From 1.5V To 9V. Mechanical Specifications Overall Length: 585 Mm (Approximately 23 Inches) Output Connector: Built-In 3-Pin Xlr Male Socket For Secure And Standard Professional Connectivity. Optional Accessories (Compatibility) To Ensure System Flexibility, The Microphone Must Be Compatible With The Following Manufacturer-Specific Accessories: Microphone Base: A Sturdy, Heavy-Duty Die-Cast Aluminium Base With An Integrated On/Off Switch, Led Indicator, And Built-In Housing For 2 Times 1.5V Um-3 Aa Cells To Power The Condenser Element. Mic Stand Adaptor: A Rugged Aluminium Die-Cast Body With A Female Xlr Connector For Direct Mounting And A Male Xlr Bottom Connector For Cable Attachment. It Must Include A 10-Meter Shielded Cable And A Threaded Brass Ferrule 5/8 27 Tpi For Standard Stand Mounting. , Mixer Amplifier General System Requirements Type: The Unit Shall Be A Professional 120W Mixer Amplifier With Integrated Usb And Bluetooth Capabilities, Designed For Public Address And Background Music Applications. User Interface: The Amplifier Shall Feature A Simplified User Interface With Preferred Setting Indicators (Colored Pins) For All Front-Panel Knobs To Ensure Ease Of Operation For Non-Technical Users. It Must Include An Led Vu Meter For Visual Output Level Indication And A 6.3 Mm Headphone Socket For Monitoring The Mixer Output. Reliability: The Unit Shall Have No Moving Parts (Such As Hard Drives) To Ensure Long-Term Operational Reliability. Audio Inputs And Media Source Microphone/Line Inputs: Four (4) Balanced Inputs, Switchable Between Microphone And Line Level Sensitivity. Switchable Phantom Power Must Be Available To Support Condenser Microphones. Priority Handling: Input 1 Shall Have The Capability To Take Priority Over All Other Inputs Via Contact Closure (Push-To-Talk) And Include An Optional 2-Tone Chime To Precede Announcements. Music Source: Integrated Media Player: Must Support Playback Of Mp3 And Wav Files (From 32 Kbit/S) Via A Usb Pen Drive (Up To 32Gb Capacity). Wireless Streaming: Built-In Bluetooth For High-Quality Audio Streaming From Mobile Devices. Remote Control: The Unit Must Be Supplied With An Ir Remote Control For The Integrated Music Source. Aux Input: A Separate Stereo Cinch Input, Internally Converted To Mono, With A Sensitivity Of 200 Mv To 300 Mv. Audio Performance And Output Output Power: 120W Rated Output Power. Loudspeaker Outputs: Constant Voltage: 100 V. Low Impedance: 4-Ohm. Call-Only Output: A Dedicated 100 V Call-Only Channel For Priority-Only Areas Or 3-Wire Remote Volume Control Override. Frequency Response: 80 Hz To 18 Khz (+1/-3 Db At -10 Db Ref. Rated Output). Distortion: 1% At Rated Output Power (1 Khz). Tone Control: Dedicated Bass And Treble Controls Providing Max ± 8 Db Adjustment. System Protection: An Integrated Limiter Circuit Must Be Included To Protect The Output Stage From Signal Clipping And Overload. Insert Feature: A Pair Of Rca Cinch Connectors Shall Be Provided To Allow The Unit To Be Used As A Separate Pre-Amplifier And Power Amplifier. Mechanical And Environmental Dimensions: 100 Mm X 430 Mm X 290 Mm (Standard 19 Wide, 2U High). Mounting: Suitable For Both Stand-Alone Use And 19 Rack Mounting. Operating Temperature: -5 °C To +45 °C. Compliance: The Unit Shall Comply With Iec 62368-1 (Safety), Cispr 32 (Emc Emission), And En 55103-2 (Emc Immunity). , Mixing Console General Requirements The Mixing Console Shall Be A Compact, Versatile 6-Channel Analog Mixer Designed For A Wide Range Of Professional Audio Applications. It Must Feature High-Quality Microphone Preamplifiers And A Rugged Construction Suitable For Both Portable And Fixed Installations. Audio Inputs And Processing Input Channels: The Unit Shall Provide A Total Of 6 Line Inputs, Configured As 2 Mono And 2 Stereo Channels. Microphone Preamplifiers: The Console Shall Include 2 Microphone Inputs Featuring Discrete Class-A D-Pre Preamps With An Inverted Darlington Circuit For Superior Sound Quality. Switchable +48V Phantom Power Must Be Available For All Microphone Inputs. Channel Processing: Mono Inputs (Ch1-2) Shall Include A 26Db Pad For High-Level Sources. Each Mono Channel Shall Feature A High-Pass Filter (Hpf) Set At 80Hz With A 12Db/Octave Slope. Equalization For Mono Channels Shall Consist Of A 2-Band Eq: High (10Khz Shelving) And Low (100Hz Shelving) With Pm15 Db Adjustment. Output And Bus Section Buses: The Console Shall Feature 1 Stereo Bus. Outputs: Stereo Out: Provided Via 2 Xlr-3-32 And 2 Phone Jacks (Balanced). Headphones: One (1) Stereo Phone Jack Output With A Dedicated Level Control. Monitoring: Visual Monitoring Shall Be Provided By A 2 Times 7 Point Led Level Meter (Peak, +6, +3, 0, -3, -10, -20Db). Technical Performance Frequency Response: Pm 0.5Db From 20Hz To 20Khz (Referenced To Nominal Output Level @ 1Khz). Total Harmonic Distortion (Thd): 0.01% @ +8Dbu (20Hz To 20Khz), Gain Knob: Min 0.003% @ +18Dbu (1Khz), Gain Knob: Min Hum & Noise: Equivalent Input Noise Of -128 Dbu (Mono Input Channel, Rs: 150Ω, Gain Knob: Max) Crosstalk: -88Db @ 1Khz. Mechanical And Electrical Specifications Chassis: The Unit Shall Be Housed In A Robust, Impact-Resistant, Powder-Coated Metal Chassis. Power Supply: External Ac Adapter: Pa-130 (120V 60Hz) Or Mu18 (100-240V 50/60Hz) Or Equivalent. Power Consumption Shall Be Approximately 12W. , Indoor Wi-Fi6 Access Point General System Requirements Type: The Unit Shall Be A High-Performance, High-Speed 11Ax (Wi-Fi 6) Indoor Dual-Band Ceiling-Mounted Wireless Access Point (Ap). Standard Support: The Wireless Access Point (Ap) Shall Strictly Adhere To The Ieee 802.11Ax (Wi-Fi 6) Standard. Radio Configuration: The Unit Must Be A High-Power Industrial Ceiling-Mounted Ap Featuring 2X2 Mimo Technology For Both 2.4 Ghz And 5 Ghz Bands. Performance: The System Must Provide A Combined Wireless Data Rate Of Up To 3 Gbps To Support High-Speed Applications Such As 4K/8K Streaming And Vr/Ar. User Capacity: The System Shall Support A High Density Of Users, Accommodating Up To 128 Concurrent Users (Max 64 Users Per Band). Advanced Features: The Ap Shall Support Multi-User Mimo (Mu-Mimo), Orthogonal Frequency Division Multiple Access (Ofdma), Bss Color Bit, And Dynamic Cca-Sd For Improved Interference Management. Hardware Specifications Chipset: The Ap Shall Be Equipped With A High-Performance 4-Core Qualcomm Chipset. Ram: 512Mb Ddr3. Antenna: Integrated Internal 4X4Dbi Dual-Band Mimo Antennas. Combined Rate: A Concurrent Wireless Rate Of Up To 3000 Mbps. Physical Interfaces: 1 X 10/100/1000Mbps Wan/Poe Port. 1 X 10/100/1000Mbps Lan Port. 1 X Reset Button. Provision For A Dc2.0 12V 1.5A Power Connector. Support For Power Over Ethernet (Poe) Following Ieee 802.3Af/802.3At Standards. Thermal Management: The Unit Shall Feature A Heat Sink With A Snap-On Structure And Special Surface Coating To Optimize Heat Dissipation. Indicators: Led Status Lights For Power, Cloud Connection, Lan Speed, 2.4Ghz Status, And 5.0Ghz Status. Audio & Network Management Quality Of Service: Must Support Wmm (Wireless Multimedia Prioritization). Roaming: Support For Seamless Roaming To Ensure Uninterrupted Connectivity For Mobile Clients. Deployment: Flexible Deployment Options Including Standalone Mode, Mobile App Management, And Zero Touch Provisioning (Ztp). Network Management: Support For Vlan Settings, Cloud Access (In Gateway Mode), And System Logging. Management: Support For Remote Configuration And Management. Maintenance: Features For Backup/Restore Configuration, Factory Reset, Scheduled Reboots, And Lifetime Firmware Upgrades. Security Requirements Encryption: Must Support Wi-Fi Protected Access 3 (Wpa3) And Wired Equivalent Privacy (Wep) 64-Bit, 128-Bit, And 156-Bit. Access Control: Integrated Mac Address Filtering And Wireless Access Control To Identify Authorized Devices. Management Security: Secure Socket Layer (Ssl) For Remote Management Login And The Ability To Block Ssid Broadcasting. Environmental & Reliability Operating Limits: Working Temperature: -10°C To 55°C. Storage Temperature: -40°C To 70°C. Humidity: 5% To 95% Non-Condensing. Protection: Esd: Air ±8K, Touch 6K. Electrical Surge: Common Mode 2K, Differential Mode 1K. Power Efficiency: Maximum Power Consumption Shall Not Exceed 16 Watts. Oem Warranty And Support Local Presence: The Original Equipment Manufacturer (Oem) Must Have An Authorized Service Center Or Registered Office In Madhya Pradesh (Proof Of Gst/Msme/Registration Required With Bid). Warranty: A 2-Year On-Site Hardware Replacement Warranty Is Required, With New Hardware Provided Within 12 Hours Of A Call Lock (No Refurbished Or Repaired Products). Technical Support: On-Site Support Must Be Available Within 6 Hours Of A Request. Future Warranty & Support: Oem Must Have Warranty And Support Pack Purchase Option Before Expiry Of Warranty Period For Next Years. Service Availability: The Oem Must Provide A 24X7 1800-Series Toll-Free Number With Support Available In The Local Hindi Language. Product Life Cycle: The Quoted Product Must Have A Life Cycle Of No Less Than 5 Years From The Date Of Supply, Including Lifetime Free Firmware And Technical Assistance. Certifications: The Product Must Be Ce, Fcc, Rohs, Iec 15408 And Iso 9001. Certified. Bidder Must Have To Submit Compliance On Oem Letter Head Along With Maf. , Network Wall Mount Rack Must Have To Supply And Installation Of 15U 500X550 Network Wall Mount Rack With Glass Door And Lock With Hardware, 6 Socket Industrial Pdu 15Amp With Mcb, Cable Manager, Fan, Hardware And Etc. , Goosneck Mic Cable, Speaker Cable In Meter, Installation And Accessories Complete Job Work With Required Cables, Frpvc Conduit, Accessories, Fitting, Installation And Etc.
Contract Date: Jun 09, 2026 Contract Value : 2.02 Lakh
Local Bodies No of Bidders 3
Madhya Pradesh View Result →
29.
Power #11055259 AOC
Tender Document For Sub-Station and Transmission Line [PACKAGE-C8(1B)]-TECHNICALSPECIFICATION FOR 12kV, 800A, 18.4kA, MULTI PANEL (Incoming, Bus Coupler with Adaptor Panel and Outgoing) SHUNT TRIP, INDOOR TYPE SCADA COMPATIBLE SWITCHGEAR WITH MOTOR OPERATED SPRING CLOSING VACUUM CIRCUIT BREAKER- 1 ELECTRICAL PART : 2 WBSETCL Assessed Quantities: 3 245KV 40KA for 3sec Gas Insulated Switchgear - i)2500 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker for line and Transformers & 2500A for Bus coupler Bay iv) CT with current ratio 1600-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification v) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc. vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 4 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 5 LA for Line bay ( one number per phase - to be installed within GIS) 6 CompleteTransformer Bays 7 Buscoupler Bay 8 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 9 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 10 Portable UHF PD monitoring System - The analyser shall have 6 channel input withinherent PD location accuracy of 0.5m., colour display unit and user friendly interface for detailed analysis.The system includes allaccessoriesto monitorPD, UHF cables,required software and other accessories to complete as per Technical Specification. 11 Dew Point Meter as per Technical Specification 12 145KV 31.5KA for 3sec Gas Insulated Switchgear i)2000 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker iv) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc.v) CT with current ratio 1000-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 13 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 14 Complete Transformer Bays for LV side of 160 MVA 220/132 KV Transformer & HV side of 50 MVA 132/33 KV Transformers 15 Bus coupler Bay 16 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 17 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 18 36 KV, 31.5KA for 3sec Indoor, floor mounted drawoutSwitchgear Assembly (2500A Bus rating with Copper Bus Bar) with VCB suitable for EHV cable entry withtripple termination arrangement and bus earthing arrangement from both side, Line earthing arrangement and dead line status and corresponding electrical and mechanicalinterlocking arrangementas per technical specification and requirement comprising of - 19 Outgoing Feeder Bays, 1250A Circuit Breaker ratingas per Techspec. 20 LV side of50MVA 132/33KV Transformer Bays (2000 A Breaker Capacity) CT Ratio 2000-1000/1A 3 coreas per Tech spec 21 HV side of6.3 MVA 33/11KV Transformer Bays(1250 A Breaker Capacity ) as per Tech Spec 22 Station service transformer bay (1250A Circuit Breaker rating) 23 Bus section Bay (2500 A Breaker Capacity) 24 (i)2(two) set of 3 phase Bus PT - 5 limb, (One set each for Main Bus-I & Main Bus-II) with isolation arrangement.as per Tech Spec. (ii) Other required equipment & accessories like Bus Earthing arrangement etc. to complete the system . 25 12 KV, 1600 A, 25 KA, 30 V DC, SCADA compatible, VCB Switchgear includingProtection Relays, ,control & annunciation equipment and other accessories complete as per technical specification (uploaded for Nandanpuronly) Cable and bus earthing shall be electrically and mechanically interlocked with associated breaker as per interlock requirement. but rating should be as per BOQrequirement comprising of - 26 Outgoing Line Bays (CT Ratio 400-200/1) 2 coreVCB rating 1250A 27 Incoming Transformer Bays(CT Ratio 600-400/1A) 4 core VCB rating 1250A 28 Bus section Bay VCB rating 1600A 29 (i) 3(Three) set of 3 phase Bus PTwith isolation arrangement must be mounted above incomer switchgearpanel. (ii) Other required equipment and accessories like Bus earthing arrangement etc to complete the system 30 Electric Overhead Travelling Crane (E.O.T.) 31 Electric Overhead Travelling Crane (E.O.T.)- For 220 KV GIS Building 5.0 Metric Ton capacity or maximum weight of GIS shipping unit whichever is higher -complete with all accessories as per technical specification and requirement. 32 Transformers : 33 160 MVA, 220/132/33 KV, 3 Phase ,Auto Transformer suitablefor NIFPSwith Bushing CTs and NCTS andRTCC panel alonwith BCUand other accessories as per technical specification ofAuto Transformer. 220KV & 132KV bushingshall be of RIP/RIS type. 34 Nitrogen injection type Fire Prevention and ExtinguishingSystem including reservoir tank andall required accessories for 160 MVA, 220/132/33 KV, 3 Phase Power Transformer 35 50 MVA, 132/33 KV, 3 Phase, 2 winding Power Transformerwith Bushing CTs and NCTsincluding RTCC panel alongwith BCU and alongwith all accessoriesin line with technical specification of Power Transformer.132 KVbushingshall be of RIP/RIS type. 36 6.3 MVA, 33/11 KV, 3 Phase, 2 winding Power Transformer with Bushing CTs and NCTs in line with technical specification of Power Transformer . As per Tech spec 37 STATION SERVICE TRANSFORMER: 315 KVA, 33/0.415 KV, 3Ph, 2-Windingas per technical specification andrequirement 38 EARTHINGTRANSFORMER: 33KV, 3 Ph ,fault current rating of874 Amp for 30 secas per Technical Specification and requirement 39 Isolators : As per Technical specification 40 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITHOUT EARTHING SWITCH (excluding insulators) for HV side of 160 MVA Transformers(water proof mechanism housing with auxiliary switch) 41 Solid Core Insulator for each set of above Isolators 42 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITH EARTHING SWITCH (excluding insulators) for Line bay(water proof mechanism housing with auxiliary switch) 43 Solid Core Insulator for each set of above Isolators 44 132KV, 1250 A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with Earth Switch for line feeder, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 45 Solid coreInsulator for each set of above Isolators 46 132KV, 1250A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with out Earth Switch for Transformers, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 47 Solid coreInsulator for each set of above Isolators 48 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - forHV side of 33/11KV Transformer & Earthing Transformer(excludingInsulators ) 49 Solid coreInsulator for each set of above Isolators 50 33KV, 2000 A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - for LV side of 132/33 KV Transformer,(excludingInsulators ) 51 Solid coreInsulator for each set of above Isolators 52 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assembly with Horn-gap fuse units to be mounted on same structure of isolator ( for Station service Transformers ) as per Tech. Specification(excluding insulator) 53 Solid Core Insulator for each set of above Isolators 54 LIGHTNINGARRESTORAs per Technical specification 55 198 KV, single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos. 160 MVA Transformersas per technical specification and as per requirement. (Polymer type) 56 198 KV class polymer type LA at Composite Tower 57 120 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless for 2 nos 160MVA Transformers,2 nos 50MVA Transformerand line bays (Polymer type) 58 42 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos 50MVA transformer, 3 Nos 6.3 MVA 33/11 KV Transformer &2 nos.315KVA station serviceTransformer) ((Polymer type) 59 12 KV, 3 phase 10KA,Station class GapelessLA (LV side of 3nos. 6.3MVA Transformers) (Polymer type) 60 220 V Battery & Charger( As per technical Specification ) 61 VRLA Battery SET - 800AH 220 Voltas per Tech Spec. 62 Battery Health monitoring system forabovementioned 220V batteries as per Technical Specification. 63 Battery Charger - 220Volt. suitable for above Battery set in line with Technical Specification(Float Charger capacity - 80A and Float cum Boost Charger capacity - 150A) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also. 64 VRLA BATTERY SET -75 AH 30 VoltCapacity will be as per design or75 AH whichever is higher as per uploadedtech spec 65 Battery Charger - 30Volt. Foalt cum Boost Charger Float charger capacity 35A or as per design whichever is higher as per Tech Spec ( uploaded) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also.(as per uploaded spec.) as per uploaded spec 66 PROTECTION PANEL ( SIMPLEX REAR Open Door type ) inclusive of all relays, Annunciator (Minimum 24 windows or more as per scheme requirement, with RS485 port for Modbus Communication, Auxiliary AC and DC Supply as well as Dedicated AC Fail and DC Fail windows) at each panel and other accessories as per specificaction and requirement. (Protection Panels will be installed in Relay Room.) 67 Protection panel with BCU and Breaker Control Switch for 220 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 68 Protection Panel with BCU and Breaker Control Switch for 220 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, Circulating Curent Protection Relay in addition to all other Transformer HV Protection relays are to be considered in HV side Panel). 69 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 220 KV Bus Coupler complete as per Tech. Spec. 70 220 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 71 Protection panel with BCU and Breaker Control Switch for 132 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 72 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. 73 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, HV REF Protection Relay in addition to other Transformer HV Protection relays are to be considered in HV side Panel) 74 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 132 KV Bus Coupler complete as per Tech. Spec. 75 132 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open Detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 76 Protection Panel with BCU and Breaker Control Switch for 33 KV Line Feeder as per Tech. Spec. 77 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/0.415 KV Station Service Transformer (S.S.T.) as per Tech. Spec. Panel schematics will be similar to Line Feeder Panel, along with addtitional S.S.T. Supervision Relays. 78 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 132/33 KV Transformer as per Tech. Spec. 79 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/11 KV Transformer (considering HV REF Protection Relay, HV Over-current Relay and all other accessories alongwith space and provision for future Transformer Differential Relay) as per Tech. Spec. and actual requirement. 80 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both side Bus PTs) and Breaker Control Switch for 33 KV Bus Section bay as per Tech. Spec. 81 Meter Panel without meter( As per drawing uploaded) 82 XLPE Copper Cableas per Technical Specification 83 220 KV 630 Sq. mm single Core Copper Cable AL sheath forLine from Composite Tower To GIS- Single phase connection with double run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 84 220 KV 630 Sq. mm single Core Copper Cable AL Sheath for HV side of 160 MVA TransformersSingle phase connection with single run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 85 220 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) forLine bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 86 132 KV 630 Sq. mmsingle core Cu cable AL sheath (as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 160 MVA, 220/132/33 KV Transformers - Single phase connection with doublerun cable for each phase - The actual length will be decided after finalisation of LUP drawing. 87 132 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 50MVA, 132/33 KV Transformers and Line bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 88 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer - Single phase connection with double run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 89 33 KV 240 Sq.mmThree Core copper cable for three 33/11KV 6.3MVA Transformer , two 315KVA Transformer - Three Phase Connection with single run cable - The actual length will be decided after finalisation of LUP drawing. 90 11 KV 400 Sq.mm 3 coreCopper for 33/11KV 6.3MVA Transformer - Three Phase Connection with singlerun cable - The actual length will be decided after finalisation of LUP drawing. 91 Outdoor End Termination Kit/ cable sealing end and other required accessories for above XLPE cables as per requirement and specification : 92 For 220KV 630 Sq.mmsingle core copper cable for Line 93 For 220KV 630 Sq.mmsingle core copper cable forTransformer 94 For 220KV 400 Sq.mmsingle core copper cable for Line 95 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 96 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 97 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 98 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 99 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 100 Indoor End Termination Kit for above XLPEcable : Dry Plug-In type GIS Indoor Termination kitwith all its accessories complete. This includes cable connecting contact plates and cable terminal box at GIS termination of type-A, Fig -3 as per IEC 60859 with support structure and insulator as per approved drawing, technical specification /requirement as per the following cables. For 33 : Dry Heat Shrink type as per approved drawing, technical specification /requirement as per the following cables. 101 For 220KV 630 Sq.mmsingle core copper cable for Line 102 For 220KV 630 Sq.mmsingle core copper cable forTransformer 103 For 220KV 400 Sq.mmsingle core copper cable for Line 104 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 105 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 106 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 107 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 108 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 109 Generator 110 DG set 100KVA with all accessoriesas per Technical specification 111 Communication Equipment (As per technical specification, BOQ and mentioned Annexure) 112 Fibre Optic Terminal equipment ( with minimum five redundantdirections with MSP protection)/Optical Line Terminal Equipment (SDH-STM 4) for the Sub Station Reduntant Power Supply card and Control card etc. complete to meet Tech. Spec. Requirement in all respect ( should be compatible with FO equipment at BAPL,SLDC & Backup SLDC for data and voice communication and carrier aided protection). 113 E1 Interface cards( Minimum 16 interfaces/card) 114 Ethernet Interfaces10/100 Mbps with Layer-2 switching ( Minimum 8 interfaces/card) 115 Equipment Cabinets 116 Main Distribution Frame (100 pairs) 117 Pre-connectorised optical fibre patch cords as per requirement 118 E-1 Port Interfacing Cable 119 EPAX (with cabinet)To be suitable both for FO Equipment and PLCC equipment with 2 digit, 3 digit & 4 digit Station numbering facility and programmable features such as using analog telephone & Laptop with (4 x 8 nos.) Local Subscribers 120 Digital Teleprotection Coupler suitable for integration with SDH terminal equipment to communicate on G 703 (E1, 2 Mbps) with minimum eight commands as per Technical Specification requirement. 121 Telephone Receiver (2-wire) for connection with EPAX,to be installed at different rooms of GIS cum Control& office building, C-type quarter, Colony buildings, Security room at main gate and other areas as per direction of Site-In-Charge. 122 Telephone cable (armoured) for all2-wire telephones & other requirements as per specification and as per requirement 123 STP Data Cable(CAT 6) with flexible GI conduit pipe for data transfer and for connecting IP phones (placed at Control room, communication room, Sub-Station In-charges room etc.) with FO Panel 124 Two no. licensed software for configuration of SDH and DPC to be handed over in two pendrive to Communication wing 125 48V, 300AH VRLA type Battery 126 48V, 60A Battery Charger 127 48V DCDB as per technical specification 128 Integration withexisting Fiber Optic System at connecting Sub-Stationon optical channel (STM-4), in consultation with the OEM, whose equipment is installed at other end. i) for voice & data communication ii)for carrier aided protection purpose -with supply of equipment and material(SFP,Patchcord, etc) as required. Intigration of new SDH, with existing SDH at connecting substation must not affect repoting of existing SDH at NMS, for which necessay action needs to be taken. 129 SAS system (as perindicative Scheme diagram, Technical Specification and requirement) -Monitoring & Control of the Sub Station from a far end Operting Station in addition to local unit 130 Rack mounted Main Server (Intel XeonSilver 4215processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-1, for connection FO port to be considered). 131 Rack mountedStandbyServer (Intel Xeon Silver 4215 processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-2, for connection FO port to be considered). 132 Local HMI (client Terminal) with 32 Monitor (LED) 133 Remote HMI PC with monitor (32LED) and necessary software for remote control and monitoring via local substation Gateway ,shall support IEC60870-5-104and IEC 61850 protocol. Remote HMI shall 100% replication of local substation HMI in all respect . 134 MainGateway (Intel Xeon Silver 4215 processor or higher)-Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol. 135 Standby Gateway (Intel Xeon Silver 4215 processor or higher)- Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol 136 Disturbance Recorder Cum Engineering Workstation PC (Industrial Grade) withMonitors (24 size- LED) 137 1 no PC with monitor (24 size LED) and necessary software for remote end to fetch DR data from relays and to configure all relays . 138 Rack mounted complete GPS unit, to be mounted in server panels . 139 Laser Colour Printer (suitable for at least A3 size) 140 Dot Matrix Printer 141 PRP Compliant, managed 20 FO port Ethernet Switch, industrial grade. 142 SAS application software with required license (suitable for 8000 signals, with life time validity) and other relevant operating & system software for running the scheme successfully. 143 Redundant Inverter of 5KVA or higher capacity in HOT-STANDBY Mode, on220V station battery , to feed SERVER, GATEWAY, HMI, Engineers WorkStation,Monitors, Ethernet Switches, KVM Switches,Printers, MODEM/ROUTER, etc. 144 Cabling System -Multimode / Single Mode Dual Window armoured fibre optic approach cable as required with HDPE duct, Flexible GI Conduit, all other power & control cables, Jacks, connectors and any other hardware to meet functional / performance requirement. 145 LIU having minimum 12 ports. 146 Red Box having minimum 4 RJ45 & 2 FO ports. 147 Remote Monitoring & control (wherever required) of Station Auxilliary System like Fire Fighting System, Air Conditioning System, Battery System, Lighting System, ACDB, 220V & 48V DCDB,replica of annunciator with buzzer & reset arrangement,& fire fighting annunciatoretc. complete as per technical specification requirement. For auxilliary system, AUX BCU to be mounted in separate panel. 148 Premium quality Integrated Control console deskwith chairs and other furnituresfor HMI Workstations, DR PC, telephones, storing of log sheets & manuals etc. suitable for three operators 149 Data Integration with SLDC and Back up SLDC End Including programme as per technical specification and also as per site requirement by directly communication with agency engaged for AMC of SCADA at SLDC and Back up SLDC End. 150 Router cum firewall shall be provided at local end for remote data transmission . 151 Network panel and other material / equipment / accessories required for successful completion ofthe job . 152 Automated notification in the form of SMS - i) SMS is required to be sent to 5 (five) mobile numbers at a time. ii) When required, any number can be deleted or altered. For that easy interface is to be provided. A log (with user-id and time) for the same is also required to be maintained. iii) The type of disturbaces or trippings for which SMS to be sent must be cofigurable. iv) All required hardwares and softwares to establish the system is under scope of the bidder. v) ISP connection in the name of WBSETCL and any formalities (if required) is to be done by the Bidder.SIM will be provided by WBSETCL. vi) After handing over the system, any recurring charges for SIM will be borne by WBSETCL. 153 Vendor Assessed Quantities: 154 ACDISTRIBUTION BOARD(comprising of Main ACDB, Sub-ACDBMLDB,DB) complete as per technical specificationand as per requirement. In addition to incomers from 2 nosStation Transformer, and Diesel Generator, suitable incomer for Solar Roof Top plant (40 kWp capacity) is to be considered as per requirement for GIS building and 11 KV room . 155 DCDISTRIBUTION BOARD (220 V DC)complete as per technical specificationand as per requirement 156 30V DCDB (with single source) for 11 KV System as per uploaded Tech spec 157 Control cable 1.1KV grade( Cupper ) as per TECH Spec and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing . Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 158 19 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 159 16 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 160 12 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 161 8 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 162 4 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 163 5 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification.(For all CT, PT & CVT connection. For CT individual colour coded cables are to be used for individual core). 164 4 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification. 165 5 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 166 3 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 167 2 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 168 POWERCABLE-Multi Core, PVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing (Allcablesshall be of Copper only.)Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 169 1C X 500 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 170 3.5C X 185 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 171 4C X 16 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 172 4C X 25 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 173 4C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 174 4C X 35 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 175 2C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 176 1C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 177 2C X 4 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 178 ACSR CONDUCTORwith accessoriesas per Technical Specification and as per requirement 179 ACSR Moose 180 ACSR Panther 181 Earth /Shield wirefor LM down comer 182 ALUMINIUM TUBULAR PIPE (Schedule 80) as per Technical Specification and as per requirement 183 3 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 184 2.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 185 1.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 186 CLAMPS,CONNECTORS,BUNDLE SPACER, Hardware fittings & accessoriesincluding equipment connectors(SUITABLE FOR SCH. 80) and as per approved ACSR conductor as per Technical Specification and as per requirement 187 220KV System 188 132KV System 189 33 KV System 190 11KV System 191 0.4KV System 192 Solid Core POSTINSULATOR& Anti fog type Disc insulatorwithhardware fittings and accessories as per Technical Specification andrequirement 193 220KV System 194 132KV System 195 33 KV System 196 11KV System 197 ILLUMINATION SYSTEM 198 ILLUMINATION SYSTEM COMPLETE (Both Indoor & outdoor)GIS building control building switchyard periphery C type building B type buildingPump House, Security Goomty / Barrack, DG Room,other area installation including light pole with foundation worketc as per technical specificationandrequirement. Allluminaire used shall be of LED type (irrespective of the type mention in specification) and all fans shall be of energy efficient BLDC type. 199 Dehumidifier as per specification 200 Dehumidifier with suitable capacity & size for 33 KV Switchgear Roomas per approved drawing 201 Direct Stroke Lightning Protection for GIS building(considering Roof Top Solar Plant), Control builting, FFPH, as per relevant IEC. 202 Furnitures and Gadgets for Conference Room - Premium quality furnitures of reputed brand like Godrej or equivalent are to be considered. However, before procurment of furnitures and gadgets, written approval from WBSETCL site-in-charge is to be taken. 203 Conference table suitable for 30 person 204 Executive High Back chairs 205 Digital Audio / visual projector - 4K resolution, 2 nos USB 2.0 and 2 nos HDMI 2.0 ports (Preferred make - Sony, Epson, JVC, Panasonic) 206 64 or higher Interactive smart whiteboard of reknowned make 207 Meeting room Audio system (microphones - 30 nos., wall mounted speakers, amplifiers, other required hardwares & softwares) - (Make Harman, Sennheiser or equivalent) 208 Decorative dimmable LED lights (average 500 lux level) 209 High quality window blinds matching with room interior 210 AIR CONDITIONING SYSTEM COMPLETE as per Technical Specification and as per requirement (All machines must be of same make.) 211 RelayRoom and SAS Room & communication Room- Ductable Air Conditioning System is to be considered. -All machines must be ofsame make . Considering continuous operation ,machines must be of Industrial gradeand refrigerent must be of R32 or better environmental standards .as per spec 212 5star rated Split type Non-Ductable AC for Battery & Chargerroom, In-Charge Room, Conference room DB Room etcAll machines must be ofsame make . Considering continuous operation, machines must be of Industrial grade / 5 star rated split and refrigerent must be of R32 or better environmental standards as per spec 213 FIRE FIGHTING & FIRE PROTECTION SYSTEM - As per Tech spec 214 Fire hydrant system in ring formation along the periphery of switchyard covering entire portion (Entire 132 KV Switchyard &220 KV switchyard), GIS building, Control Building etc as required. 215 Portable fire extinguisher & bucket at key locations of switchyard ,control room, GIS building, office area ,residential and other building and near each Power Transformer as per Technical spec . and as per requirement. 216 Fire Alarm System (Concealed cabling is preferred ) - i) Smoke & heat detection system covering all the rooms of GIS cum Control room building ii) adequatebeam detector with redundancyfor GIS room - as per technical specification & requirement 217 CCTV Survelliance system (as perTech specification ) - The system shall be capable to integrate with central control centre. The actual quantity shall be finalised depending on the approved design . 218 Fixed Bullet camera (short range) with all accessories -as per technical specification. 219 Fixed Bullet camera (long range) with all accessories -as per technical specification. 220 Fixed Dome camera with all accessories-as per technical specification. 221 PTZ camera with all accessories-as per technical specification. 222 IP Based Outdoor Thermal Camera with all accessories as per technical specification 223 VMS management server with 30 days recording facility for minimum 40 cameras (with MS Windows professional operating system) -as per technical specification. 224 Video surveillance software and license for 40 cameras or more (which shall be valid for lifetime) -as per technical specification. 225 40 4K Display, 24 x 7 operation; as per technical specifications 226 2 KVA online UPS with 30 minute backup-as per technical specification. 227 24 Port PoE 1G Network Switch with 4 nos SFP Ports along with 1G SM SFP Modules; as per technical specifications 228 Required number of Industrial Grade 4 Port 1G Network Switch with 2 Nos. SFP Ports along with 1G SM SFP Modules; as per technical specifications 229 Media Converter, PTZ keyboard with joystick, cabinet, junction box, POE injector, LIU, power supply, Indoor floor mount rack, outdoor rack, clamp, connector and hardware for camera fixing etc. -as per technical specification. 230 All types of armoured fibre optic cables, CAT 6 cables, armoured copper cables, HDMI cable, HDPE conduits, PVC straight pipe and accessories etc. required to complete the system-as per technical specification. 231 Computer Table, rolling Chair, additional mounting pole and Other tit-bit materials not specified above but required for successful completion of CCTV surveillance systemas per site requirement. 232 NEXT GENERATION FIREWALL/ CYBERSECURITY GATEWAY and all required hardwares & software for integration with remote Control Command & Centre AS PER TECHNICAL SPECIFICATIONS. 233 One additional viewing unitsat In-Charge Room with all required hardware and software 234 SUBSTATION EARTHING SYSTEM : As per Technical specification 235 32mm dia or higherMS rod for main earthmat grid,corner mesh and periphry for outdoor switchyard . The actual quantity shall be finalised depending on the approved design (Only design quantity with lap length without any wastage for main mat, periphry& corner mesh will be considered for payment.) The Earthmat design is to be done considering earth resistivity of 30 Ohm-m oractual measured value whichever is higher. 236 32mm dia or higherMS rod for riser below and aboveground auxiliary Mat fencing and gate earthing bending length and overlapping length as per requirement & as per approved drawing 237 GS flat for riser above ground / cable trench & other areas.Rod/pipe electrode , test link and other materials etc. - as per requirement, technical specificationand approved design/layout including earthpit. 238 Earthing for GIS enclosure and GIS building as per manufacturers recommendation including civil work. 239 Earth Link Box, SVL, Earth Strip, earth continuity cable for single bondwherever required for Earthing of allXLPE Cablecomplete at cable conductor junction point etc as per technical requirement / as per approved drawings. 240 Earth Strip and other accessories including lugs for link box etc wherever required for Earthing of allXLPE Cablecompletei as per technical requirement / as per approved drawings. 241 3 ph Earth Link Box with SVLas per technical requirement / as per approved drawings. 242 3 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 243 1 ph Earth Link Box with SVL as per technical requirement / as per approved drawings. 244 1 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 245 6.6 KV/3.8 KV Copper Bonding Cableas per technical requirement / as per approved drawings. 246 1.1KV Grade 240 sqmm CopperEarth continuity Cableas per technical requirement / as per approved drawings. 247 GRID CONNECTED ROOF TOP SOLAR POWER SYSTEM (As per Technical Specification) 248 5kWpSolar Roof Top plant (at the roof of GIS & Control building) having high quality mono. crystalline type solar PV module from reputed brand (as mentioned under WBSETCL Makers list), Mounting structures (Fixed Type) with Civil pedestals including civil work as per requirement. 249 i) High quality inverter from reputed brand as mentioned under WBSETCL Makers list) suitable for 40kWp solar roof top plant. ii ) All other required accessories- Data logger with CPU, LCD monitor, UPS,Metering,Junction box & distribution boxes, Type-II Surge protective device, string monitoring uints, pyrano.meter with sensors, all Cables, hardware, earthing & lightning protection materials, required furnitures & cabinets, conduits etc. to complete the system of 40kWp grid connected plant 250 Essential spares necessary for operation, routine maintenance and testing of equipment supplied for 3 years to be covered under Annual Maintenance Contract. 251 MISCELLANEOUS ITEMS -As per Technical specification 252 i) Glow signboard for name of the substation- minimum size 50 sq ft, ii) schematic SLD on glow signboard iii) Danger plate, phase plate, bay nameplate etc iv) Statutory caution boards made of mild steel of 250 mm x 200 mm and at least 2 mm thick and vitreous enamelled, white on both sides and with inscription in signal red colour on front side as required. v) Shock treatment chart in local and English language duly mounted on wooden frame with glass as required vi) Safety Slogans - to be put up in Offices and Sub-station premises (Site-in-charge may select the slogans from WBSETCL Safety Manual, Version 2.0, Page 18)vii) WBSETCLLOGO & Sub-Station Nameat main gate of Sub-Station entry with good quality durable materials 253 Ferrules & lugs, GI conduit, Cu flexible wires for panel earthing etc. 254 .Angle, Channel and other hardwares for installation of panels, DBs etc. 255 Supply of itemsfabrication marker, tags,Protection cover tiles, PVC warning tape, route marker, jointing marker, clamps connector etc as per specification & approved drawing 256 Trefoil clamp suitable for approved XLPE cable 257 Bay marshalling kiosk, dummypanel, junction box, , Lighting & other Distribution Boards etc. As per requirement& as per Technical specification 258 Bay marshalling kiosk, 259 Dummypanel, 260 Junction box, (CT,PT,CVT as per requirement 261 Distribution Boards as per requirement 262 Cable Tray (Ladder type & perforated type etc ) as per requirement for indoor cable trench and and as per requirement within GIS building 263 Industrial type Exhaust Fans and mechanised louvers of required quantity for 220KV & 132KV GIS Hall, 33 KV indoor switchgear& 11 KV Switchgear Room as per requirement & as per Tech Spec 264 HDPE Pipes 265 200 mm Dia 266 150 mm Dia 267 One storage type RO + UV + UF water purifier for office building 268 Spares:- Spare relays including test jack are to be delivered after duly tested at CTD WBSETCL on chargeble basis. All materias will be as per scheme of this project ) 269 Distance Protection relay (as approved at 220 KV Line bay for Main-1 potection) 270 Distance Protection relay (as approved at 220 KV Line bay for Main-2 potection) 271 Distance Protection relay (as approved at 132 KV Line bay for Main-1 potection) 272 Distance Protection relay (as approved at 132 KV Line bay for Main-2 potection) 273 Transformer differential Relay(same as approved for 220 KV Transformer bay) 274 Transformer differential Relay(same as approved for 132 KV Transformer bay) 275 BCU (same as approved for 220KV bays ) 276 BCU (same as approved for 132KV bays ) 277 BCU (same as approved for 33KV bays ) 278 BCU (same as approved for auxilliary system) 279 PRP Compliant, managed Ethernet Switch, industrial grade. (same as approved for SCADA Systeml) 280 Over Current& Earth fault Relay 281 Bus Bar Differential Relay (One Central Unit and one Peripheral Unit) 282 Trip Relay 283 VT selection Relay 284 Spares: Spare are to be delivered at nearest store in consultation with in charge All materias will be as per scheme of this project. 285 220KV GIS Circuit Breaker complete mechanism 286 220KV GIS Disconnector complete mechanism 287 220KV GIS High speed earth switch complete mechanism 288 132KV GIS Circuit Breaker complete mechanism 289 132KV GIS Disconnector complete mechanism 290 132KV GIS High speed earth switch complete mechanism 291 33KV CT - same as supplied for Line bay 292 33KV CT - same as supplied for 50 MVA Transformer bay 293 Safety Equipment 294 Full Body Safety Harness with Twin rope lanyard, length < 3 meter with waist belt and accessories as per IS - 3521 295 First aid box complete with all items (as perAnnexure in line with WBSETCL Safety Manual, Version 2.0) - to be placed at Control Room & Maintenance Room 296 Discharge cum earthing rod - Highly insulated FRP telescopic type with all accessories suitable for 245 KV system or higher,CPRI type tested as per IEC - 1230:1993 & IEC - 1235 with tested epoxy earthing rod for 10 KV /ft for 1 min as per IEC- 855 297 Safety Helmet - Made of Polyethylene/ glass fibre reinforced with head band, cradle, strap fittings with withstanding temp of 50oC as per IS – 2925 (Suitable stand / Racks are to be provided to store the helmets. Helmets are to be colour coded for visitors, technical staff and others) 298 Gum Boot made of Rubber (Suitable stand / Racks are to be provided for storage.) 299 Renowned make High Voltage Detector - Suitable for 11 KV to 245 KV , 50 HZ system with sensing level 1 mtr. for 132/220/ 400 KV system complete with HV probe, 5.0 mtr telescopic insulation stick with visual LED and Buzzer indication as per IS - 13771/ IS - 2071 300 Safety shoes - Double density PU sole, leather with hard Toe cap, Non-woven Eva lining, anti static /electric shock proof Insole (with minimum electrical resistance and high voltage of 18 KV), conforming to IS – 15298 301 Hand Gloves - Made of soft quality rubber, seamless latex, shock proof, for electrical purpose suitable upto33 KV -system as per IS - 4770 302 Electric Arc Protection Suit - FR suit compatible to wearwith hood, jacket, face shield, trouser etc complaint with NEFA- 70 E standard as per IEC - 61482-1-1-2007/9 303 Insulating mat - High density insulating matsasper IS - 15652 with ac(rms) kv 3.3, sizes of rolls 5000 mm X 1000 mm (to cover entire operating length of 33KV switchgear, DB room & Panel room) 304 Safety Ladder - Single step self supporting type with complete Fiber glass, 3 inch wide, antiskid fibre steps, non - slip fibre glass shoes with thick rubber pad, Height 8 ft 305 Safety Torch / Search Light - Body:- Fibre glass, PCB - glass epoxy to meet all weather condition, Circuitry - IC Control, Charge -220 Volt AC, Light Source - 12 V Halogen Bulb, 55 watt, Power source - 12 volt, 7 AH sealed battery, Extra jack tobe provided for direct lightning by 12 volt DC, Continuous run - 2 hr High beam Rechargeable Hand Held Search light 306 Lifting Rope - Hemp Rope / Sisal Rope / Manila Rope - One inch dia., 30mtr long 307 Passenger Elevator (6 person capacity, ) - For GIS & Control buildingcomplete in all respect as per technical specification and as per requirement. 308 Industrial grade Vacuum Cleaner of reputed make 309 Civil Part: 310 Supply, fabrication, galvanisaton of variousswitchyard & equipment structures,LM-Lattice type ( 35Mtr or 50 Mtr-based on DSLP Calculation), XLPE cable supporting structure completeas per approved electrical layoutdrawings and technical specification (Electrical & civil) and as per requirement complete. (including Nuts & Bolts and foundation bolts) 311 Switchyard Structures including Nuts & Bolts 312 Foundation Bolts for switchyard structures including nuts, washers and anchor plates (Foundation Bolts shall be galvanisedupto threaded length from top) 313 Supply, fabrication of various structures (MS FLAT, MS Plate, Insert plate, Angles, Transformer Rail, Channels, ISMB, Chequred plate, MS grating for GIS Building, Transformer, Cable trench , drain etc. as per approved drawings, technical specification (Electrical & civil) andrequirement complete.
Contract Date: May 11, 2026 Contract Value : 242.30 Crore
Government Departments No of Bidders 3
West Bengal View Result →
30.
Housing Urban and Rular Development #10954262 Technical Bid
Tender for Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical &-Hospital Division , Jammu Supply, Installation, Testing & Commissioning Of Medical Grade Online Double Pass Reverse Osmosis(Ro) Plant Of 500 Lph Capacity For Dialysis Along With Allied Works On Turnkey Basis At Sdh Bishnah Mhdj/E-Nit 02 Of 2026 Dated: 07.04.2026 Due : 17.04.2026 Name Of The Bidder/ Bidding Firm / Company : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. 0.0 Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Rates Inclusive All Taxes Excise Duty Gst Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes In Rs. P Total Amount With Taxes Total Amount In Words , Medical Grade Double Pass Reverse Osmosis System Of 500Litre Per Hour Capacity For Dialysis Unit, Along With Allied Works In Sub-District Hospital, Bishnah On Turnkey Basis. Complete Job As Per Site Condition In All Respect. (A Turnkey Job) As Per Technical Specifications/Scope Of Work Mentioned In E-Nit At Serial No. 1 , Provided And Fixing Ofcivil & Structural Works-Rooftop Shed (15Ft X 12Ft) The Civil Works Will Comprise Design, Fabrication, And Execution Of A Structurally Sound Rooftop Shed Engineered To Withstand Environmental Loads And Ensure Long-Term Service Life. Job Includes Providing And Fixing Of Elevated Reinforced Cement Concrete Base Slab: Height: 6 To 8 Inches (150-200 Mm) Above Rooftop Level. Material: M25 Grade Reinforced Cement Concrete (Rcc) With Fe-500 Tmt Bars, Conforming To Is 456:2000.Slope: 1:100 Slope Towards Drainage Points For Effective Water Runoff. Drainage System: 4-Inch Diameter Pvc Pipes (Reputed Brand), Integrated With The BuildingS Rainwater Disposal Network. Boundary Walls Construction: 230 Mm Thick Brickwork (Masonry Parapet Walls) On All Four Sides, Fixed At 2 Feet (600 Mm) Height. Plaster: Interior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives Exterior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives. Tiling Interior: 100% Vitrified Tiles (Is-Compliant) With 100 Mm High Skirting. 2. Roofing & Cladding Material: Color-Coated Corrugated Galvanized Iron (Cgi) Sheets, 0.40 Mm Thick, For Both Roofing And Wall Cladding. Support Structure: Mild Steel (Ms) Angle Posts (50X50x5 Mm), Conforming To Is 2062 Grade, Finished With Red Oxide Primer And Synthetic Enamel Paint. Fixing: Secured With Galvanized J-Hooks And Epdm Washers. Roof Slope: Cgi Sheets On The Roof Installed With A 1:100 Slope To Align With The Drainage System, Ensuring Proper Water Runoff. All Steel Members Conforming To Is 2062 Grade, Red Oxide Primer + Synthetic Enamel Paint Finish. Secured With Galvanized J-Hooks + Epdm Washers. Access Door 1.2 M (4 Feet) Wide Ms Framed Powder-Coated Door With Heavy-Duty Lock System. Interior Finishing 100% Vitrified Tiles, Reputed Make, Is-Compliant. Skirting Up To 100 Mm Height. Electrical Works • Wiring & Distribution Concealed Wiring With Frlsh Copper Cables As Per Is 694. 10 Sq.Mm Copper Cable Dedicated To Ro Plant. Job Includes Fixtures& Accessories Ceiling Fan, Exhaust Fan, Switchboards, Lighting. 16A& 6A Sockets Of Reputed Make. Double Pole Mcbs For Safety. , Supply, Installation, Testing And Commissioning Of 5Kva Online Ups With Inbuild Isolation Ups/Inverter System & Stabilizer (If Required) For Power Back Up Of Ro Plant At Dialysis Centre Of Sdh Bishnah For Uninterrupted Power Supply With Maximum Battery Backup Of Load To The System Along With 2-Years Warranty. Description Of Technical Specifications: • Power Backup • 5 Kva Online Ups, Reputed Make, 4-5 Hours Backup. • Directly Connected To Ro Plant. • Range 160 - 280Vac • Pwm Technology & Igbt Based • Pure Sine Wave Output With Thd 3% • Power Factor 0.8 • Large Input Operating Range, Eliminates Unnecessary Battery • D I S C H A R G E • Ups Startup Without Battery • Multi-Functional Lcd/Led Display • In-Built Galvanic Isolation • Automatic Battery Charge In Ups Off Mode • Static Bypass And Cold Start • Emi/Rfi And Noise Filter • Generator And Solar Compatible • Auto-Restart Function • Extended Backup Time Suitable Charger • Protection: Output Short Circuit, Low Voltage Of Battery, Over Or • Lack Of Input Voltage, Overload And So On • Standard: Iec/En62040-1, 62040-2, 62040-3, Complying To Ce, Bis, Rohs, • Iso:9001, Iso:14001 • Battery Rack Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
31.
Housing Urban and Rular Development #10954260 Technical Bid
Tender for Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical &-Hospital Division , Jammu Supply, Installation, Testing & Commissioning Of Medical Grade Online Double Pass Reverse Osmosis(Ro) Plant Of 500 Lph Capacity For Dialysis Along With Allied Works On Turnkey Basis At Sdh Kot Bhalwal Mhdj/E-Nit 03 Of 2026-27 Dated: 08.04.2026 Due : 17.04.2026 Name Of The Bidder/ Bidding Firm / Company : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. 0.0 Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Rates Inclusive All Taxes Excise Duty Gst Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes In Rs. P Total Amount With Taxes Total Amount In Words , Medical Grade Double Pass Reverse Osmosis System Of 500Litre Per Hour Capacity For Dialysis Unit, Along With Allied Works In Sub-District Hospital, Kotbhalwal On Turnkey Basis. Complete Job As Per Site Condition In All Respect. The Technical Specification/ Scope Of Work Includes Following. As Per Annexure A Technical Specification/ Scope Of Work At Serial No. 1 , Provided And Fixing Ofcivil & Structural Works-Rooftop Shed (15Ft X 12Ft) The Civil Works Will Comprise Design, Fabrication, And Execution Of A Structurally Sound Rooftop Shed Engineered To Withstand Environmental Loads And Ensure Long-Term Service Life. Job Includes Providing And Fixing Of Elevated Reinforced Cement Concrete Base Slab: Height: 6 To 8 Inches (150-200 Mm) Above Rooftop Level. Material: M25 Grade Reinforced Cement Concrete (Rcc) With Fe-500 Tmt Bars, Conforming To Is 456:2000.Slope: 1:100 Slope Towards Drainage Points For Effective Water Runoff. Drainage System: 4-Inch Diameter Pvc Pipes (Reputed Brand), Integrated With The BuildingS Rainwater Disposal Network. Boundary Walls Construction: 230 Mm Thick Brickwork (Masonry Parapet Walls) On All Four Sides, Fixed At 2 Feet (600 Mm) Height. Plaster: Interior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives Exterior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives. Tiling Interior: 100% Vitrified Tiles (Is-Compliant) With 100 Mm High Skirting. 2. Roofing & Cladding Material: Color-Coated Corrugated Galvanized Iron (Cgi) Sheets, 0.40 Mm Thick, For Both Roofing And Wall Cladding. Support Structure: Mild Steel (Ms) Angle Posts (50X50x5 Mm), Conforming To Is 2062 Grade, Finished With Red Oxide Primer And Synthetic Enamel Paint. Fixing: Secured With Galvanized J-Hooks And Epdm Washers. Roof Slope: Cgi Sheets On The Roof Installed With A 1:100 Slope To Align With The Drainage System, Ensuring Proper Water Runoff. All Steel Members Conforming To Is 2062 Grade, Red Oxide Primer + Synthetic Enamel Paint Finish. Secured With Galvanized J-Hooks + Epdm Washers. Access Door 1.2 M (4 Feet) Wide Ms Framed Powder-Coated Door With Heavy-Duty Lock System. Interior Finishing 100% Vitrified Tiles, Reputed Make, Is-Compliant. Skirting Up To 100 Mm Height. Electrical Works • Wiring & Distribution Concealed Wiring With Frlsh Copper Cables As Per Is 694. 10 Sq.Mm Copper Cable Dedicated To Ro Plant. Job Includes Fixtures& Accessories Ceiling Fan, Exhaust Fan, Switchboards, Lighting. 16A& 6A Sockets Of Reputed Make. Double Pole Mcbs For Safety. , Supply, Installation, Testing And Commissioning Of 5Kva Online Ups With Inbuild Isolation Ups/Inverter System & Stabilizer (If Required) For Power Back Up Of Ro Plant At Dialysis Centre Of Sdh Kotbhalwal For Uninterrupted Power Supply With Maximum Battery Backup Of Load To The System Along With 2-Years Warranty. Description Of Technical Specifications: • Power Backup • 5 Kva Online Ups, Reputed Make, 4-5 Hours Backup. • Directly Connected To Ro Plant. • Range 160 - 280Vac • Pwm Technology & Igbt Based • Pure Sine Wave Output With Thd 3% • Power Factor 0.8 • Large Input Operating Range, Eliminates Unnecessary Battery • D I S C H A R G E • Ups Startup Without Battery • Multi-Functional Lcd/Led Display • In-Built Galvanic Isolation • Automatic Battery Charge In Ups Off Mode • Static Bypass And Cold Start • Emi/Rfi And Noise Filter • Generator And Solar Compatible • Auto-Restart Function • Extended Backup Time Suitable Charger • Protection: Output Short Circuit, Low Voltage Of Battery, Over Or • Lack Of Input Voltage, Overload And So On • Standard: Iec/En62040-1, 62040-2, 62040-3, Complying To Ce, Bis, Rohs, • Iso:9001, Iso:14001 • Battery Rack Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
32.
Housing Urban and Rular Development #10954259 Technical Bid
Tender for Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical &-Hospital Division , Jammu : Supply, Installation, Testing & Commissioning Of Medical Grade Online Double Pass Reverse Osmosis(Ro) Plant Of 500 Lph Capacity For Dialysis Along With Allied Works On Turnkey Basis At Sdh R.S. Pura. Mhdj/E-Nit 04 Of 2026-27 Dated: 08.04.2026 Due : 17.04.2026 Name Of The Bidder/ Bidding Firm / Company : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. 0.0 Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Rates Inclusive All Taxes Excise Duty Gst Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes In Rs. P Total Amount With Taxes Total Amount In Words , Medical Grade Double Pass Reverse Osmosis System Of 500Litre Per Hour Capacity For Dialysis Unit, Along With Allied Works In Sub-District Hospital, R.S. Pura On Turnkey Basis. Complete Job As Per Site Condition In All Respect (A Turnkey Job) As Per Technical Specifications/Scope Of Work Mentioned In E-Nit At Serial No. 1 , Provided And Fixing Ofcivil & Structural Works-Rooftop Shed (15Ft X 12Ft) The Civil Works Will Comprise Design, Fabrication, And Execution Of A Structurally Sound Rooftop Shed Engineered To Withstand Environmental Loads And Ensure Long-Term Service Life. Job Includes Providing And Fixing Of Elevated Reinforced Cement Concrete Base Slab: Height: 6 To 8 Inches (150-200 Mm) Above Rooftop Level. Material: M25 Grade Reinforced Cement Concrete (Rcc) With Fe-500 Tmt Bars, Conforming To Is 456:2000.Slope: 1:100 Slope Towards Drainage Points For Effective Water Runoff. Drainage System: 4-Inch Diameter Pvc Pipes (Reputed Brand), Integrated With The BuildingS Rainwater Disposal Network. Boundary Walls Construction: 230 Mm Thick Brickwork (Masonry Parapet Walls) On All Four Sides, Fixed At 2 Feet (600 Mm) Height. Plaster: Interior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives Exterior: Cement Mortar Plaster (1:4 Ratio) With Waterproofing Additives. Tiling Interior: 100% Vitrified Tiles (Is-Compliant) With 100 Mm High Skirting. 2. Roofing & Cladding Material: Color-Coated Corrugated Galvanized Iron (Cgi) Sheets, 0.40 Mm Thick, For Both Roofing And Wall Cladding. Support Structure: Mild Steel (Ms) Angle Posts (50X50x5 Mm), Conforming To Is 2062 Grade, Finished With Red Oxide Primer And Synthetic Enamel Paint. Fixing: Secured With Galvanized J-Hooks And Epdm Washers. Roof Slope: Cgi Sheets On The Roof Installed With A 1:100 Slope To Align With The Drainage System, Ensuring Proper Water Runoff. All Steel Members Conforming To Is 2062 Grade, Red Oxide Primer + Synthetic Enamel Paint Finish. Secured With Galvanized J-Hooks + Epdm Washers. Access Door 1.2 M (4 Feet) Wide Ms Framed Powder-Coated Door With Heavy-Duty Lock System. Interior Finishing 100% Vitrified Tiles, Reputed Make, Is-Compliant. Skirting Up To 100 Mm Height. Electrical Works • Wiring & Distribution Concealed Wiring With Frlsh Copper Cables As Per Is 694. 10 Sq.Mm Copper Cable Dedicated To Ro Plant. Job Includes Fixtures& Accessories Ceiling Fan, Exhaust Fan, Switchboards, Lighting. 16A& 6A Sockets Of Reputed Make. Double Pole Mcbs For Safety. , Supply, Installation, Testing And Commissioning Of 5Kva Online Ups With Inbuild Isolation Ups/Inverter System & Stabilizer (If Required) For Power Back Up Of Ro Plant At Dialysis Centre Of Sdh R.S. Pura For Uninterrupted Power Supply With Maximum Battery Backup Of Load To The System Along With 2-Years Warranty. Description Of Technical Specifications: • Power Backup • 5 Kva Online Ups, Reputed Make, 4-5 Hours Backup. • Directly Connected To Ro Plant. • Range 160 - 280Vac • Pwm Technology & Igbt Based • Pure Sine Wave Output With Thd 3% • Power Factor 0.8 • Large Input Operating Range, Eliminates Unnecessary Battery • D I S C H A R G E • Ups Startup Without Battery • Multi-Functional Lcd/Led Display • In-Built Galvanic Isolation • Automatic Battery Charge In Ups Off Mode • Static Bypass And Cold Start • Emi/Rfi And Noise Filter • Generator And Solar Compatible • Auto-Restart Function • Extended Backup Time Suitable Charger • Protection: Output Short Circuit, Low Voltage Of Battery, Over Or • Lack Of Input Voltage, Overload And So On • Standard: Iec/En62040-1, 62040-2, 62040-3, Complying To Ce, Bis, Rohs, • Iso:9001, Iso:14001 • Battery Rack Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
34.
Housing Urban and Rular Development #10803700 Price Bid
E-Quotation No.5 For 2022-23 E Rate Quotation For Preparation Of Ssr For Various Item Which Is Mention In Notice , For Steel Structure / Tmt -Providing & Applyingduraclean- Wris An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coat Is Done Which Is Named As Duraguard A 3 Pack System , This Is A Blend Of Water Miscible Epoxy Andgives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance Etc.As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) For Concrete Surface -Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 10 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kleox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Scaffolding, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Grouting By Polyceramic Cementitious Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicgrout G 06 + 53 Grade Cement + Water As Per Requirementto Reduce The Porosityof Concrete / Masonry Structure And To Increase The Strength Of Structure Usinggrouting Pipes, Grouting M / C, Mixer Etc And All Relevant Safety With All Leads And Lifts, Material, Machinery, Labour, Scaffolding Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Top Terrace Waterproofing -- Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Waterproofing Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Waterproofing Of Concrete Surfaces Of Terrace To A Thickness Upto 5 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Of Existing Terrace Surface Upto Mother Slab Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. After Picc Apply A Poly Ceramic Cementitious Top Coat I.E Niccoat Pc + Kelmer A 60Of Dimple Chemicals & Services Pvt. Ltd After Finishing, After Top Coat Application, Pcc Will Be Done Up To 50 Mmthickness ( Or As Per Site Condition ) Of Desire Slope To Drain The Water And Kept Ponded For Continuous Period Of 3 Days To Detect Any Seepage / Leakage / Dampness If Any, The Surface Then Shall Be Cleared, Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Scaffolding, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 10 Mm Or As Per Surface Conditions Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, After Picc Apply A Poly Ceramic Cementitious Top Coat I.E Niccoat Pc + Kelmer A 60 Of Dimple Chemicals & Services Pvt. Ltd After Finishing It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Grouting By Polyceramic Cementitious Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicgrout G 06 + 53 Grade Cement + Water As Per Requirementto Reduce The Porosityof Concrete / Masonry Structure And To Increase The Strength Of Structure Usinggrouting Pipes, Grouting M / C, Mixer Etc And All Relevant Safety With All Leads And Lifts, Material, Machinery, Labour, Scaffolding Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Removal Of Vegetation / Plants:- Removal Of Vegetation & Plants By Its Roots From The Entire Surface Of Bridge With Manual Or Mechanical Means. After Removal Of Vegetation & Plants, Roots Shall Be Treated With Special Chemical I.E. Steripure Mbt 20 Of Dimple Chemicals & Services Pvt. Ltd. Top 50 Mm Shall Filled With High Strength Grout ( Nicgrout G 06Ofdimple Chemicals & Services Pvt. Ltd+ Cement 53 Grade ) Including Cost Of All Material, Machinery, Labour, Scaffolding, Etc.As Per Specification And As Directed By Engineer-In-Charge. , Providing & Applyingduraclean- Wris An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coat Is Done Which Is Named As Duraguard A 3 Pack System , This Is A Blend Of Water Miscible Epoxy Andgives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance Etc.As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 10 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas, Lift Jointsetc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Concrete Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Scaffolding, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Road Surfaces To A Thickness Upto 15 Mm Or As Per Surface Conditions And Also Treatment Of Pot Holes, Cracksetc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Keloxr 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar.Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces To A Thickness Upto 25 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Keloxr 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar.Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing And Applying Poly Ironite Ceramic Cementitious ( Picc ) Ofdimple Chemicals & Services Pvt. Ltd Ensure Self Curing, High Abrasion Resistant, Non-Shrink, High Compressive Strength, Low Porosity, Uv Resistant Coating Mortar On Existing Well Gsb Of 100 Mm Thickness, Get Compacted Andlevelled , Cure The Surfacethen Applyingself Curing Coating Picc Mortarin Properation Of 1;1 ( Nicomix Series : Metal ) For 50 Mm Thickness After Stamp The Surface By Special Concrete Stamping Mould As Per Specified Texture And Colour Etc. Next Day Apply Finish Coat Of Kelmer A60 Of Dimple Chemical & Services Pvt. Ltd Complete With All Leads And Lifts, Material, Machinery, Labour Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. ( Note- Gsb , Colour & Stamping Rates Not Included In This Ra ) , Masonry Bridge Repair Work:- Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For T-Pointing To A Depthupto 50 Mm Or As Per Surface Conditions And Raised On Stone Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Manual Or Mechanical Means. After That, Clean The Joints With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removing Of Algae Fungi Followed By High Pressure Water Jet And Compressed Air Blower. Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404 Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Top Coat Will Be Done With Kelmer A 60 + Niccoat Pc On Picc To Seal The Surface And Reduce The Porosity Etc Complete As Per Specification Including Cost Of All Material, Machinery, Labour, Scaffolding, Transportation Etc. With All Leads And Lifts As Directed By The Engineer-In-Charge. , Providing & Grouting By Polyceramic Cementitious Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicgrout G 06 + 53 Grade Cement + Water As Per Requirementto Reduce The Porosityof Concrete / Masonry Structure And To Increase The Strength Of Structure Usinggrouting Pipes, Grouting M / C, Mixer Etc And All Relevant Safety With All Leads And Lifts, Material, Machinery, Labour, Scaffolding Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Removal Of Vegetation / Plants:- Removal Of Vegetation & Plants By Its Roots From The Entire Surface Of Bridge With Manual Or Mechanical Means. After Removal Of Vegetation & Plants, Roots Shall Be Treated With Special Chemical I.E. Steripure Mbt 20 Of Dimple Chemicals & Services Pvt. Ltd. Top 50 Mm Shall Filled With High Strength Grout ( Nicgrout G 06Ofdimple Chemicals & Services Pvt. Ltd+ Cement 53 Grade ) Including Cost Of All Material, Machinery, Labour, Scaffolding, Etc.As Per Specification And As Directed By Engineer-In-Charge. , Providing & Applyingduraclean- Wris An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Filling Potholes For Concrete & Bitumen Roads To A Thickness Upto 75 Mm In A Ratio Of 1:1 ( Picc Mortar1 Part: Metal 6Mm 1Part ) Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Add Nikure 500 In To Above Morter For Normal Setting Of Dimple Chemicals & Services Pvt. Ltd. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applying Impermeable, High Compressive Strength, Monolithic Application, Excellent Bond Strength, Anti-Skid, High Abrasion Resistance, Uv Resistance, Self-Curing, Non-Toxic Polymer Based Cementitious Mortar Named Aspoly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Filling Potholes For Concrete & Bitumen Roads To A Thickness Upto 75 Mm Or As Per Surface Conditions And Also Treatment Of Honey Combing Areas Etc. Cleaning Will Be Done By Remove All Loose Particles, Dust Particles Or Any Other Foreign Material / Particles Using Breaker, Wire Brush, High Pressure Water Jet, Compressed Air Jet ( Manual Or Mechanical Means ) . Applybond Coat A Water Miscible Epoxy Named As Kelox R 101 + Kelox H 404Of Dimple Chemicals & Services Pvt. Ltd. ( Using Manual / Mechanical Means ) Before Picc Application, It Ensure Strong Adhesion With Old Surface To New Picc Mortar. Add Nikure 500 Of Dimple Chemicals & Services Pvt. Ltd. On Above Mortar Picc Will Be Ready To Traffic Load After 1 Hr Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing And Applying 30 Mm Thick Self Curing Ceramic Polymer Microconcrete Of Dimple Chemicals & Services Pvt. Ltd. Having Compressive Strength Above M30, Non Shrink, Impermeable, Filling Mortar In Cavities Like Beams, Column Etc. To Load Carrying R.C.C Member In One Or Two Layers ( Depending Upon The Site Condition ) On Cleaned Concrete Surface , Includinghoney Comb Area ( Using Manual / Mechanical Means ) . Mixingmortar Of Nicocil C80 And Fresh 53 Grade Cement With Required Water Cement Ratio For Desired Consistency And Applying And Finishing By Manual Trowelling , Curing After Curing Initial Setting Time Etc, As Per Manufacturers Specification Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Kelox R 101 ( Resin ) + Kelox H 404 ( Hardener ) A Water Miscible Epoxy Of Dimple Chemicals & Services Pvt. Ltd. For Bonding Old Concrete To New Picc Mortar, After Mixing Slowly In Predefined Ratio And Applying By Brush On The Surface. When It Is Tacky Then Apply The Picc Mortar Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coat Is Done Which Is Named As Duraguard A 3 Pack System Of Dimple Chemicals & Services Pvt. Ltd., This Is A Blend Of Water Miscible Epoxy Andgives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance Etc. Wrapping Will Be Done With Duramesh Of Dimple Chemicals & Services Pvt. Ltd. After 2 To 3 Hrs Of Wrapping Apply Final Coat Of Duraguard When Surface Is Tacky. This Coats Will Give The Thickness Approx. 350 Micron, As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) . After Primer Application Base Coating Is Done Which Is Named As Bituminous Epoxy Of Dimple Chemicals & Services Pvt. Ltd. A 2 Pack System, Kelox Rb5050 & Kelox Rh4040 This Is A Blend Of Rapid Setting Bitumen Emulsion And Water Miscible Epoxy I.E. Modified Epoxy Resin And Special Hardener. Wrapping Will Be Done With Duramesh Of Dimple Chemicals & Services Pvt. Ltd. Gives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As Abrasion & Impact Resistance Followed By Top Coat With Bituminous Epoxy. This Coating Gives Better Performance As Compare To Coatings Specified In Is 10221 . Apply 2 Coats With A Thickness 1Mm ( Bituminous Epoxy + Duramesh+ Bituminous Epoxy ) As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness 40 Micron On Prepared Metal Surface. Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) After Primer Application Final Coating Is Done Which Is Named As Bituminous Epoxy Of Dimple Chemicals & Services Pvt. Ltd. A 2 Pack System Kelox Rb 5050 Kelox Rh 4040, This Is A Blend Of Rapid Setting Bitumen Emulsion And Water Miscible Epoxy I.E. Modified Epoxy Resin And Special Hardener. Apply 2 Coats With A Thickness Of 300 Micron On Prepared Metal Surface Etc. It Gives Properties Like Ant Rodent, High Corrosion Resistance, Chemical Resistance As Well As High Abrasion & Impact Resistance, Corrosion Protection Etc. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Providing & Applyingduraclean- Wr Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By High Pressure Waterjet Cleaning / Grinding, Wire Brush, Washing Or Mopping Also Removing Loose Particles ( Using Other Mechanical / Manual Means ) . Measure The Burr On The Surface By Burr Measuring Gauge, If The Burr Is Above 25 Microns Repeat The Cleaning Till Burr Is Below 25 Microns. Apply Duracap Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique One-Pack Cold Metalizing Process Consisting Of Blend Of Active Ceramic, Alumina And Modified Polymer. Duracap Forms A Dot Matrix Coating On The Surface, Which Gives Better Adhesion With Substrates. Apply 2 Coats With A Thickness Upto 40 Micron On Prepared Metal Surface . Duracap Ensures Good Corrosion Resistance, Its A Weldable Primer Also Work As A Uv Reflector Etc. Also Reduces Frictional Resistance To Flow Of Water. As Per Manufacturers Specification ( Using Other Manual / Mechanical Means ) Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Chargesas Directed By The Engineer In Charge. , Water Proofing Of Swimming Pool -- Providing And Applying Impermeable, Monolithic Application, Uv Resistant, Self Curing, Non Toxic, High Compressive Strength, Non Shrink, Polymer Based Cementitious Waterproofing Mortar Named As Poly Ironite Ceramic Cementitious ( Picc ) Which Consists Of Nicomix Series + 53 Grade Cement + Water Of Dimple Chemicals & Services Pvt. Ltd.For Resurfacing The Concrete Surfaces Of Swimming Pool To A Thickness Upto 10 Mm Or As Per Surface Condition And Also Treatment Of Lift Joints And Honey Combing Areas, Potholes Etc. By Removing Loose Material, Dust Particles, Grout Slurry By Breaking It With Manual / Mechanical Means. Removing Of Existing Embedded M.S. Bar If Any, Cleaning The Lift Joints, Honey Combing Areas And Entire Surface With Special Chemical Named As Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Removal Of Algae - Fungi Followed With High Pressure Water Jet. Apply Bond Coat Named As Kelox R 101 + Kelox H 404Which Is Water Miscible Epoxy Of Dimple Chemicals & Services Pvt. Ltd. Before Picc Application For Suitable Bond Between Old Surface To New Picc Mortar And Then Do The Picc Application Providing With Top Coat Of Niccoat Pc + Kelmer A 60 Of Dimple Chemicals & Services Pvt. Ltd. After Finishing, Complete As Per Specification Including Materials, Machinery, Labour , Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Applying Durabond Of Dimple Chemicals & Services Pvt. Ltd. Is A Unique Blend Of Organic And Inorganic Materials Consisting Ceramic Ironite, Active Ceramic, Cement And Water Miscible Modified Epoxy. As This Contain Water Miscible Epoxy, Can Be Applied On Wet Surface With Better Bond Strength Between Old Concrete And Waterproofing Coating Material For External Surface Of Building. Crack Filling Will Be Done By Duraguardof Dimple Chemicals & Services Pvt. Ltd, Having Cold Weldling Properties Which Cn Stick Anything To Anything. Surface Cleaning Is Done To Remove Loose Material, Dust Particles By Breaking Using Manual And / Or Mechanical Means, Cleaning The Cracks, Small Potholes And Surface Preparation Will Be Done With Special Chemical Name Steripure 10Of Dimple Chemicals & Services Pvt. Ltd For Algae- Fungi Removal And Then Clean It With High Pressure Water Jet, Then Applying A Durabond Of 2 Coats A Special Type Of Coat Suitable To Bond Old To New Concrete Finishing, Complete As Per Specification Including Materials, Machinery, Labour, Scaffolding , Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Applying Duraclean Od Of Dimple Chemicals & Services Pvt. Ltd. Is An Organic Polymer For Emulsification & Dispersion Of Oil And Grease Spilled On Any Surface ( Concrete, Metal Or Water ) .Apply By Brush Or Spray On The Surface To Be Cleaned, Wait For About 5 – 10 Minutes, Wash The Surface With High Water Presure Jet.Repeat Process For Heavy Spillage And Surfaces Soaked In Oil Till It Is De-Oiled. Wait For 24 Hrs And See Whether The Penetrated Oil Comes Out To The Outer Surface, If Yes Then Repeat The Step 2-4. Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Water Proofing Of Water Tank -- Providing And Applying Impermeable, Uv Resistant, Self Curing, Non Toxic, High Strength, Non Shrink, Polymer Based Cementitious Waterproofing Mortar Named As Poly Ironite Ceramic Cementitious ( Picc ) Of Dimple Chemicals & Services Pvt. Ltd. Which Consists Of Nicomix Series + 53 Grade Cement + Water For Resurfacing Of Concrete Surfaces Of Water Tank To A Thickness Upto 5 Mm Or As Per Surface Conditions And Also Treatment Of Lift Joints And Honey Combing Areas, Potholes Etc. Is To Be Done With Picc By Removing Loose Material, Dust Particles, By Breaking Using Manual And / Or Mechanical Means, Removing Of Existing Embedded M.S. Bar If Any, Cleaning Of Lift Joints, Honey Combing Areas And Surface Is To Be Done Using Special Chemical Named Steripure 10 Of Dimple Chemicals & Services Pvt. Ltd. For Algae- Fungi Removal Followed By Compressed Water Jet. Apply Primer Coat Name Kelox R 101 + Kelox H 404 A Water Miscible Epoxy Of Dimple Chemicals And Services Pvt. Ltd. Before Picc Application. Kelox Is A Bonding Agent Between Old To New Concrete Mortar. Top Coat Will Be Done With Niccoat Pc + Kelmer A 60 Of Dimple Chemicals & Services Pvt. Ltd., Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Impermeable, Anti-Wear Coating On Concrete & Bitumen Road :- Providing And Applying Bituminous Epoxy Coating Of Dimple Chemicals & Services Pvt. Ltd. Having High Abrasion Resistant, Anti-Skid, Impermeable, Non Shrink, High Compressive Strength, For Concrete And Bitumen Road Coating Etc. Including Cleaning Of Concrete / Bitumen Road Surface By Wire Brush, Water Jet, Air Blower Etc. ( Using Other Mechanical / Manual Means ) To Remove Existing Loose Particles, Dirt Etc. Then Do Bituminous Coating By Taking Kelox Rb 5050 Of Dimple Chemicals & Services Pvt. Ltd.In A Clean Container & Add Kelox Rh 4040 Of Dimple Chemicals & Services Pvt. Ltd.In It, Apply This Mixture By Wiper On The Cleaned Surface.Top Coat Is Done Using Ready To Use Product I.E. Nicomix Butacoat Of Dimple Chemicals & Services Pvt. Ltd. , After Bituminous Epoxy Coating Immediately Sprinkle Nicomix Butacoat On Bituminous Epoxy Coating To Provide Impermeable, Antiwear & Antiskid Surface. After 10-15 Min, Use Roller On Top Coat I.E. On Nicomix Butacoatfor Compaction. After 6 Hours, Coated Surface Is Ready To Take The Load Of Traffic Movement, Complete With All Leads And Lifts, Material, Machinery, Labour Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing And Applying Bituminous Epoxy Coating Of Dimple Chemicals & Services Pvt. Ltd. An Impermeable, Excellent Bonding With Old Surface, Non Shrink Repair Coating For Concrete Terrace & Etp Plants Includs & Steel Structurebituminous Coating By Taking Kelox Rb 5050 In A Clean Container & Add Kelox Rh 4040 In It, Stirr Well To Get Homogeneous Mixture, Apply This Mixture By Brush Type Wiper On The Cleaned Surface I, E Dust And Loose Partical Free, No Algae Fungi, Non Oily Surface, Corrosion Free Etc. Bituminious Epoxy Coating Is A Two Pack System Consist Of Kelox Rb 5050 Is A Blend Of Bitumen Emulsion With Epoxy Resin And Kelox H 404 Is A Modified Hardener.It Ensures Strong Adhesion With Any Substrate Like Concrete Road, Bituminous Road, Metal, Wood Etc. Complete With All Leads And Lifts, Material, Machinery, Labour Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. , Providing& Applyinghigh Abrasive Resistant, Impermeable , High Strength, Non Shrink, Self Curing Poly Ironite Ceramic Cementatious ( Picc ) Of Dimple Chemical Services And Pvt Ltd, Which Consists Of Nicomix Series + 53 Grade Cement + Water I, E Piccmortar Mixing With Water Misible Epoxy I.E Kellox R 101 + Kelox H 404 Of Dimple Chemical Services And Pvt Ltdin The Ratio Of 80:20 ( Picc:Epoxy ) And Fill Thecracksfor 10 Mm Width & 10 Mm Depth With 1 Rmt Lengthon The Concrete Surface Ofroad, Industrial Floor Etc, Including Cleaning Of Cracks ( Using Manual / Mechanical Means ) , Power Tool Cleaning, Clean With Special Chemical Steripure 10 Of Dimple Chemical Services And Pvt Ltd For Alge Fungi Removal & Duraclean Od Of Dimple Chemical Services And Pvt Ltd For Oil Removalwith High Pressure Water Jet, Apply Bond Coat Of Water Misible Epoxy Of Keloxbefore Picc:Epoxy Application And Finishing, Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts And Any Other Incidental Charges As Directed By The Engineer In Charge. ( As Per Data Rate ) , Providing And Applying Duraclean Wr Of Dimple Chemicals & Services Pvt. Ltd. An Organic Polymer For Conversion Of Unwanted Substrate ( Burr ) On Metal Surface Crystal Structure Modification To Remove Oxide By Washing Or Mopping. Mesure Burr On The Surface, Spray Duraclean Wr On Surface To Be Cleaned, Wait For 5-10 Min And Then Wash It Off With High Pressure Water Jet. Again Mesure Burr On The Surface, Repeat The Process Till Burr Is Below 25 Micron Or 10% Of The Orignal Burr. Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Applying Clonon Of Dimple Chemicals & Services Pvt. Ltd. Clonon Is A Revolutionary Product Forbroad Spectrum Odour Remover.Clonon Contains A Proprietary Combination With Major Ingredilents Like Active Lodophor Solution, Benzalkonium Chloride Glutaraldhyde And Others, Clonon Product Main Features Of Odour Remover, No Added Fragrance , Debonds Nano Particles From Surface, Bacteria Killer, Quik Action, Non Toxic Chemicals, Ready To Use, No Stain And Residue , Does Not Contain Formaldehyde, Biodegradable Environmental Friendly.Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge , Providing And Laying In Situ Cement Concrete M -30 With Tremix Treatment For 200 Mm Thickness For Concrete Road With Uniform Sprinklingthe Nicocil R 90 Of Dimple Chemicals & Services Pvt. Ltd Using Travelfor Surface Hardening , High Abrasion Resistance And Low Porosity.Also Is Includinglaying Plastic Sheet For 125 Micron Thickness With Groove Cutting Of 4 Mm Wide And 20 Mm Deep With Necessary Refilling With Polysulphidesealant ( Pouring Grade ) Confirming To Bs : 5212 - 1989 Into Sawed Groove Widened At Top For Sealant Reservoir Of Specified Size And Shape As Per Detailed Drawing Including Fixing Polyethylene Foam Backer Rod Of Required Diameter ( Excluding Reinforcement ) With Coarsen And Fine Aggregate Using V.S.I.Qualityartificial Sand Etc. Complete As Per Specification Including Cost Of All Materials, Machinery, Labour, Insurance Charges As Directed By The Engineer In Charge. ( Note- Construction Of Concrete Road As Per Instruction Of Engineer-In-Charge Or Requirement, Rate Of Construction Not Included ) , Providing And Applying Steripure S 30 Of Dimple Chemicals & Services Pvt. Ltd. Is Antibacterial, Antifungal Water Base Solution To Remove Algae-Fungi From Concrete , Masonry , Metal, Stone, Tile , Wood, Paver Block And All Composite Material Surface. Spray Steripure S 30 ( Prepar Dillusion In 1 Part Steripuri S30 : 9 Part Water ) On Surface To Be Cleaned, Wait For 15 - 20 Mins Then Wash The Surface With High Pressure Water Jet. This Unique Product Kills The Roots Of Algae-Fungi Which Can Be Removed From Surface By High Pressure Water Jet Cleaning. Re-Growth Of Algae-Fungi Is Stopped Due To Removal Of Roots. Complete As Per Specification Including Materials, Machinery, Labour, Insurance Charges Transportation With All Leads And Lifts As Directed By The Engineer In Charge. , Providing And Laying Of Rumble Strip Usingplastirib 2K 2 Component Cold Plastic Road Marking Material In Single Monolithic Application To Create Rumble Strip Raised Section 15 Mm - 20 Mm High , 200 To 300 Mm Wide And Spaced About 1 Meter Centre To Centre Of Roughly 6 Numbers At One Location, Across The Entire Carriageway. Each Rumble Marking Shall Be Made Complete With Drop On Solid Plus Reflective Glass Beads @ 350 Gm / Sqm Spread Throughout The Surface Of Marking. The Finished Surface Shall Be Levelled, Uniform , Free From Straks And Holes Including Surface Cleaning And Cost Of All Materials Etc. Complete. As Per Irc 99, These Rumble Strips Shall Be Applied As Traffic Calming Measure. , Kerb Stone / Vertical Surface Painting With Reflective Paint, Make Grade 1 ( As Per Is 164 ) Water Based Acrylic Paint, Preferably Mechnical Application For One Coat Priming Coat And 1 Uniform Retro Reflective Finish Coat In Required Colour. Yellow Retroreflecive Coat Shall Be Bright Yellow During Night With Minimum Rl ( Dry ) > 375 Mcd / M2 / Lux White Retroreflective Coat Shall Be Bright White During Night With Minium Rl ( Dry ) > 450 Mcd / M2 / Lux .Cleaning Of The Surface Thoroughly By Removing Flakes, Dust Deposits, Vegetation Growth, Pasted Paper Etc., Using Coir / Coil Brush, So As To Enable The Application Of Respective Primer Etc. , Providing And Applying 2 Component Cold Plastic Night Glow Paint Rolled On Surfacing Material Solvent Free, High Build Two Pack Seamless, Tough, Skid Resistant, Material Which Has Property Of Attaining 600 Microns Thickness In Single Coat Application White ( Or As Required Colour ) Based On Glass And Colour Retaining Acralic Cross Linking Resin System For Coloured Road Surfacing Including Surface Cleaning And Cost Of All Material Etc. Complete. ( All Inclusive On Bitumen Or Concrete Surface ) Night Glow Paint Shall Preferably Be Roller Applied. After Glow Finish Surface Shall Provide Minimum Of 8 Hrs Glow After Fully Absorbing Ambient Light ( Visibile Light Or Uv Light ) For 15 - 30 Min. Cleaning Of The Surface Thoroughly By Removing Flakes, Dust Deposits, Vegetation Growth, Pasted Paper Etc., Using Coir / Coil Brush, So As To Enable The Application Of Respective Primer Etc. , Augmented Wet Reflective Dot ( Awrd ) Marking System On Awrd On - Bituminous Surface Component Cold Plastic Road Marking Primer Supply And Application Awrd Road Marking System With Minimum Of 50% Of The Intended Road Marking The Surface Area To Be Covered With Dots Of Thickness Of 5+1 Mm, Each Dot Having Dia. Of 25 + 5 Mm Using Plastidot 2K 2 Component Cold Plastic Road Marking Material And Solid Plus 100 Drop Of Glass Beads With Ri 1.6. Performance Parameters Shall Comply With Rl Dry > 800 Mcd / Sqm / Lux & Rl Wet > 250 Mcd / Sqm / Lux , Measured Using Zehntner Gmbh / Esylux / Delta Make Reflectometer In Case Of Concrete / Worn Out Bituminous Surfaces Application Of 2 Component Cold Plastic Road Marking Primer Is Mandatory. , Augmented Wet Reflective Dot ( Awrd ) Marking System On Awrd On- Concrete Surface With Application Of Special 2 Component Cold Plastic Road Marking Primer Supply And Application Awrd Road Marking System With Minimum Of 50% Of The Intended Road Marking The Surface Area To Be Covered With Dots Of Thickness Of 5+1 Mm, Each Dot Having Dia. Of 25 + 5 Mm Using Plastidot 2K 2 Component Cold Plastic Road Marking Material And Solid Plus 100 Drop Of Glass Beads With Ri 1.6. Performance Parameters Shall Comply With Rl Dry > 800 Mcd / Sqm / Lux & Rl Wet > 250 Mcd / Sqm / Lux , Measured Using Zehntner Gmbh / Esylux / Delta Make Reflectometer In Case Of Concrete / Worn Out Bituminous Surfaces Application Of 2 Component Cold Plastic Road Marking Primer Is Mandatory. , Supplying And Fixing Of High Performance Moulded Shank Raised Pavement Marker / Cats Eye Made Of Reinforced Polycarbonate And Weather Protected Ip > 68 Abs Moulded Body Having 2 Compartment Scratch And Abrasion-Proof Prismatic Polycarbonate Lens Capable Of Providing A Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Per Wheel ( Per Axle ) Of 20000 Kg And Per Axle 40000 Kg Tested In Accordance To Astm 4280D & En 1463-1 And En 1463-2 And Morth. The Dimensions Of The Pavement Marker Being 100 X 100 X 18 Mm And Weight 140Gm, Pin 55 Mm Depth Dia 13 Mm In Star Shape For Better Gripfixing Will Be By Drilling Holes On The Road For The Shank To Go Inside, Without Nails And Using Cold Plastic-Based Adhesive As Per Manufacturers Recommendation And Complete As Directed By The Engineer. The Contractor And Manufacturer Shall Submit A Minimum 1 Yr Installation Warranty And 2 Years Reflectivity Warranty For Satisfactory Field Performance. , Supplying And Fixing Of Solar Road Studs ( High Performance ) Polycarbonate Body, Pavement Surface Mounted Compliant Withen1463 Part 3 Havinguni-Direction Or Bi-Directional With Solar Powered Led Illumination And Reflective Panel Having 1 ) Dimensions 115 X 100 X 8.5 Mm 2 ) Marker Shall Support A Load Of 20 Ton Tested In Accordance To En 1463 . 3 ) Waterproof And Dust Protection Ip > 68 4 ) Weight 117 Gram 5 ) Fixing Using 2 Coponent Cold Plastic Based Adhesive / Butyl Tape Or As Reccomended By Manufacturer 6 ) Working Temperature: Up To 80 Deg. C 7 ) The Contractor And Manufacturer Shall Submit A Technical Warraty Of 1 Yr. , Providing And Fixing 8 Mm Tinted Tuffan Glass With Fitting Inaluminium Section Of Size 100 Mm X 763 Mm Also Including Door Glass With Ss Handle Of Size 1.2M Height And 50Mm O.D. And 30Mm I.D. And Ss Door Hinges Of Size 150Mm Height And 80Mm Width On One Face, Fitting Glass With Silicone Tube Including Scaffolding And Fitting Charges Etc. Complete & As Directed By Enginner Incharge , Providing Concrete Resurfacing System Of High Strength High Abrasion Resistant Deck Crs Base Coat And Deck Crs Top Coat Of Approved Color With Antiskid / Rough Texture And With Approved Stencil Pattern Following By Deck Sealer Final Coat, Including Providing Surface Preparation By Using Grinder Machine / Hand Grinders On Serrated / Slurried Concrete Surface To Expose Original Hard Concrete Surface And Washing Area Thoroughly Including Removal Of Nails Erc Complete. Surface Will Be Open To Traffic After 72 Hours Of Application Of Deck Crs. Deck Crs Consumption 3.8-4 Kg / Sqm , Providing Concrete Resurfacing System Of High Strength High Abrasion Resistant Deck Crs Base Coat And Deck Crs Top Coat Of Approved Color With Antiskid / Rough Texture Without Any Pattern ( Plain ) And Followed By Deck Sealer Final Coat, Including Providing Surface Preparation By Using Grinder Machine / Hand Grinders On Serrated / Slurried Concrete Surface To Expose Original Hard Concrete Surface And Washing Area Thoroughly Including Removal Of Nails Erc Complete. Surface Will Be Open To Traffic After 72 Hours Of Application Of Deck Crs. Deck Crs Consumption 3.8-4 Kg / Sqm , Providing And Fixing 50 Mm Thick Door Shutter Using 25 Block Board 10 Mm Ply On Either Side Of Block Board , 4 Mm Thick Veneer On One Side With Melamine Polish And 1 Mm Thick Laminate On Other Side , Ss Hinges ( Brass ) 125 Mm , Tower Bolt 380 Mm , Mortise Lock , Concealed Door Closer Including Necessary Teak Wood Bedding , Fevical , Screw & Labour For Fixing Etc Complete As Directed By Engineer In Charge , Providing And Fixing 50 Mm Thick Main Entrance Door Partly Panelled And Partly Glazed Door Using 25 Mm Block Board , 10 Mm Ply Garjan On Either Side , Teak Wood Beading Covered With On Side 4 Mm Thick Rich Veneer With Melamine Polish, Floor Spring , Concealed Lock , 1.2 M Handle Pair Of 25 Mm Dia , Glass Pannels Of 0.40 X 0.40 Including Necessary Fevicol , Nails Screw And Labour For Fixing Etc Complete , Providing And Fixing High Quality Inter Locking Concrete Cobble Stone Finish Pavers In Circular Form Having Area Of 1.218 Sqm ( Approximately 71 Or 74 Nos. In One Circle ) , Made By Using Rubber Moulds Of 60 Mm Thickness, Tested And Certified By Csir-Cbri Of Having Strength Of 500 Kg / Sqm. Pavers Should Have 10 Mm Face Layer In White Cement With Pigment Of Lanxess Or Tata Make And Base Mix In M40 Grade Concrete. The Pavers Should Be Made Available In Various Sizes To Make A Circle Of Approved Finish And Design Of Standard Make On A Bed Of Crushed Sand Of 25 To 30 Mm Thick Including Skirting Joints And Cleaning As Directed By Engineer Incharge Etc. Complete. Prior Approval Of Superintending Engineer Will Be Necessary . , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size600 Mm X 450 Mm Light Duty Withstand To Carry A Load Of 5.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 600 Mm X 450 Mm Medium Duty Withstand To Carry A Load Of 12.50 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 600 Mm X 450 Mm Heavy Duty Withstand To Carry A Load Of 25.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 900 X 600 Mm Light Duty Withstand To Carry A Load Of 5.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 900 X 600 Mm Medium Duty Withstand To Carry A Load Of 12.50 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Fiber Reinforced Cover To Inspection Chamber With Frame Of Fibrocast Or Equivalent Make Of Size 900 X 600 Mm Heavy Duty Withstand To Carry A Load Of 25.00 M.T. With 2 Years Warranty Issued From Company, Also Should Submit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge. , Providing And Fixing Glass Bricks Of Size 190 Mm X 190 Mm X 80 Mm Fitted Inside Already Prepared Ss / Ms Fabrication Using Silicon Glass Sealant Before Placing Of Bricks And After Placing Of Bricks To Create A Bond Between Fabrication Material And Glass Bricks, Finishing The Surface By Filling The Gap Between Glass Bricks With White Cement Etc. Including Loading And Unloading Of The Material As Directed By Engineer In Charge. , Supply, Providing Manufacturing And Fixing Of Interchangeble Plates Of Assigned Designation Post And Room Of Office, Judges And Subordinate Of Organization Of Providing 5 Mm Blue Frp Sheet For Base Surface And 5 Mm Frp Sheet Laser Cutting Latter Of White Color With Measuring , Marking, Cutting, Finishing Also With Fixing Of Letter On Based Surface By A Solvent By Providing Latters Name In Required Language Style, Type Font Including Interchangeble System For Easily Changing Of Plates As Per The Requirement For Pleasent And Elegant Look With Screw And Grip As Per Requirement And Direction Etc Complete. ( Size-0.65M*0.35 ) . , Supply, Providing Manufacturing And Fixing Of Interchangeble Plates Of Assigned Designation Post And Room Of Office, Judges And Subordinate Of Organization Of Providing 5 Mm Blue Frp Sheet For Base Surface And 5 Mm Frp Sheet Laser Cutting Latter Of White Color With Measuring , Marking, Cutting, Finishing Also With Fixing Of Letter On Based Surface By A Solvent By Providing Latters Name In Required Language Style, Type Font Including Interchangeble System For Easily Changing Of Plates As Per The Requirement For Pleasent And Elegant Look With Screw And Grip As Per Requirement And Direction Etc Complete. ( Size-0.25M*0.35 ) . , Providing & Fixing Ester Resin Material 5Th Km Structure As Per Irc-08-1980 With Chopped Strand Mat 350 Micron Gsm With H2o2, Cobolt Octate ( 3% ) , With Pigment & All Required Allied Accessories Front & Back Side Bonded With Type Iv Retro Reflective Sheeting & Lettering Etc Complete. The Contractor Has To Provide Outerdoor Test Certificate Of Type Iv Reflective Sheeting From The Retro Reflective Manufacture. For Fixing Structure Excavation Of 0.75 X 0.75 X 0.45 Mtr. & Filling The Soil Inside The Bags & That Bags Filled In The Structure As Directed Engineer In-Charge Etc Complete , Providing & Fixing Ester Resin Material 1St Km Structure As Per Irc-08-1980 With Chopped Strand Mat 350 Micron Gsm With H2o2, Cobolt Octate ( 3% ) , With Pigment & All Required Allied Accessories Front & Back Side Bonded With Type Iv Retro Reflectivesheeting & Lettering Etc Complete. The Contractor Has To Provide Outerdoor Test Certificate Of Type Iv Reflective Sheeting From The Retro Reflective Manufacture. For Fixing Structure Excavation Of 0.75 X 0.75 X 0.45 Mtr. & Filling The Soil Inside The Bags & That Bags Filled In The Structure As Directed Engineer In-Charge Etc Complete , Providing & Fixing Ester Resin Material 200 Mtr Structure As Per Irc-26-1967 With Chopped Strand Mat 350 Micron Gsm With H2o2, Cobolt Octate ( 3% ) , With Pigment & All Required Allied Accessoriesfor Fixing Structure Excavation Of 0.60 X 0.60 X 0.45 Mtr. & Filling The Soil Inside The Bags & That Bags Filled In The Structure As Directed Engineer In-Charge Etc Complete , Milling Of Bituminous Pavement Upto Depth Of 50 Mm By Cold Milling Machine Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead Charges Of 10 Km As Directed By Engineer In Charge , Milling Of Bituminous Pavement Upto Depth Of 100 Mm By Cold Milling Machine Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead 10 Km As Directed By Engineer In Charge , Dismantling Of Rigid Concrete Pavement Upto Depth Of 50 Mm Using Cold Milling Machine Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead 10 Km As Directed By Engineer In Charge , Re-Texturing Of Rigid Concrete Pavement Upto Depth Of 20 Mm Using Cold Milling Machine With Fine Milling Drum Of Width 1.5M Or Above Including All Levelling And Slope Sensors, Self-Loading Of Milled Material By Discharge Conveyor Onto Transport Vehicle Including Lead 10 Km As Directed By Engineer In Charge , Providing And Fixing Stainless Steel ( Grade 304 ) Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainlesssteel Nuts And Bolts Complete, I / C Fixing The Railling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixingh Accessories Such As Nuts, Bolts, Fasteners Etc. ) . , Providing Concrete Surfacing System With Deck Crs With Base Coat, Application Of Pattern In Stencil Followed By Top Coat And Sealer Including Surface Preparation Etc. Deck Crs Consumption About 4 Kg / Sqm As Per Manufacturers Specifications , Providing Concrete Surfacing System With Deck Crs With Base Coat Followed By Top Coat And Sealer Including Surface Preparation Etc. Deck Crs Consumption About 4 Kg / Sqm As Per Manufacturers Specifications , Providing And Fixing High Density Polypropylene Under Ground Water Tank Of Requiredsize With 5 Years Warranty Issued From Company, Also Shouldsubmit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge ( From 1000 To 3000 Litre ) , Providing And Fixing High Density Polypropylene Under Ground Water Tank Of Requiredsize With 5 Years Warranty Issued From Company, Also Shouldsubmit Test Report From Manufacturer Etc. Including All Labours, Accessories, Leads, Lifts And As Directed By Engineer In Charge ( From 1000 To 3000 Litre ) , Providing And Fixingchevron Sign Boards In Rectangular Size Of 500X600 Mm Made Out Of ___Mm Aluminium Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting -Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retro Reflective Specified Background, Border And Back Side Retro Reflective Symbols, Letters, Numerals, Arrow As Per Irc 67-2012 Supported With Back Support Frame 25Mmx25mmx3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M.S. Angle Iron Post Of 65Mmx65mmx6mm, 3.45 Mtr Long, Dully Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25Cm Width Including G.I.Fixtures Etc. Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc. Complete.Class-B ( Type Iv High Intensity Micro Prismatic Grade Sheeting -Hip ) Shall Have 7 Years Writen Warranty From The Manufacturer Of The Retro Reflective Sheeting And Authorised Distributor / Converter Issued For Fiedl Performance Including The Screen Printed Area And Cut-Out Sheeting And Cut-Out From The Durable Transparent Overlay Film And This Warranty Certificate In Original & A Certified Copy Of 3 Year Outdoor Exposure Test Report From Third Party Test Lab For The Product Offered Shall Be Submitted By Contractor To Engineer Incharge. 500X600mmmade Out Of 3Mm Aluminium Composite Material With 0.25Mm Skin Thickness On Either Side , Providing And Fixing One Way Hazard Marker Sign Boards In Rectangular Size Of 300X900 Mm Made Out Of 4Mm Aluminium Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting -Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retro Reflective Specified Background, Border And Back Side Retro Reflective Symbols, Letters, Numerals, Arrow As Per Irc 67-2012 Supported With Back Support Frame 25Mmx25mmx3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M.S. Angle Iron Post Of 65Mmx65mmx6mm, 1.8 Mtr Long, Dully Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25Cm Width Including G.I.Fixtures Etc. Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc. Complete.Class-B ( Type Iv High Intensity Micro Prismatic Grade Sheeting -Hip ) Shall Have 7 Years Writen Warranty From The Manufacturer Of The Retro Reflective Sheeting And Authorised Distributor / Converter Issued For Fiedl Performance Including The Screen Printed Area And Cut-Out Sheeting And Cut-Out From The Durable Transparent Overlay Film And This Warranty Certificate In Original & A Certified Copy Of 3 Year Outdoor Exposure Test Report From Third Party Test Lab For The Product Offered Shall Be Submitted By Contractor To Engineer Incharge. 300X900mmmade Out Of 4Mm Aluminium Composite Material With 0.5Mm Skin Thickness On Either Side , Providing And Fixing Two Way Hazard Marker Sign Boards In Rectangular Size Of 450X900 Mm Made Out Of 4Mm Aluminium Sheet Bonded With White Retro Reflective Sheeting Of Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting -Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retro Reflective Specified Background, Border And Back Side Retro Reflective Symbols, Letters, Numerals, Arrow As Per Irc 67-2012 Supported With Back Support Frame 25Mmx25mmx3mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Of M.S. Angle Iron Post Of 65Mmx65mmx6mm, 1.8 Mtr Long, Dully Painted With Flat Oil Paint Having Alternate Black And White Bands Of 25Cm Width Including G.I.Fixtures Etc. Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc. Complete.Class-B ( Type Iv High Intensity Micro Prismatic Grade Sheeting -Hip ) Shall Have 7 Years Writen Warranty From The Manufacturer Of The Retro Reflective Sheeting And Authorised Distributor / Converter Issued For Fiedl Performance Including The Screen Printed Area And Cut-Out Sheeting And Cut-Out From The Durable Transparent Overlay Film And This Warranty Certificate In Original & A Certified Copy Of 3 Year Outdoor Exposure Test Report From Third Party Test Lab For The Product Offered Shall Be Submitted By Contractor To Engineer Incharge.450X900mmmade Out Of 4Mm Aluminium Composite Material With 0.5Mm Skin Thickness On Either Side , Providing And Fixing 8 Mm Tinted Tuffan Glass With Fitting Inaluminium Section Of Size 100 Mm X 763 Mm Also Including Door Glass With Ss Handle Of Size 1.2M Height And 50Mm O.D. And 30Mm I.D. And Ss Door Hinges Of Size 150Mm Height And 80Mm Width On One Face, Fitting Glass With Silicone Tube Including Scaffolding And Fitting Charges Etc. Complete & As Directed By Enginner Incharge , Encasement Of Columns And Beams By Placing 75 To 100 Mm Thick Free Flow High Strength Micro Concrete With Leak Proof Shuttering With All Equipments, Manpower Etc Complete , Providing And Applying Epoxy Mortar Epibond 11 In Areas Of Fixing Cracks, Charges For Repairing Of Full Depth Crack ( 30Mm Depth X 50Mm Width / Per Rmt ) On Pqc Pavement Using Cross Stitching Method As Per Specification Of Irc Sp : 83-2008. Making Chase Along Crack And Cleaning The Holes / Chase With Oil Free Compressed Air, Fixing Of Reinforcement In Holes Filled With Epoxy Resin In Enough Quantity For The Bar To Be Completely Coated When Inserted In The Hole, Chase Filling With Epoxy Epibond 11 ( 1:1:8 ) Resin+Hardner+Fine Sand As Per Manufacture Specification, Curing, Transportation, Required Machinery, Tool And Tackles Etc.Complete As Per Direction Of Eic. , Providing And Applying Volatile Corrosion Inhibiting Wax Powrthrow Ht Wax On Ht Lrpc Strands Before Embedment In Tendons, Lrpc Strands Of 12.7Mm & 15.2Mm , Tendon Duct Need To Be Lime Washed Prior To Insertion Of Lrpc Strands Coated With Wax. The Wax Must Be Hand Applied Using Gloves From The Pail Prior To Insertion On Strand In Duct. Powrthrow Ht Wax Is Bipolar In Nature Should Protect The Strand From Corrosion. As Per Jis Z 1535M Method Should Have Excellent Resistance To Corrosion Spots. And The Wax Should Show A Potential Change Of Minimum 120Mv As Per Corrosion Potential Test.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Maharashtra View Result →
35.
Drinking Water Supply and Sanitation #10787620 Price Bid
Tender For Renovation Of Lighting/Electrification System Of Ias Bungalow And Hasanpur Reservoir Ndmc Area, Djb; 1 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(a)3 x 2.5 sqmm 2 (b) 3 x 4 sqmm 3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit as required.2 x 10 + 1 x 6 sqmmearth wire. 4 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group B ) 5 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable with 1.5 sqmm FRLS PVC insulated copper conductor single core cable with earth wirein the existing surface/recessed steel/PVC conduit including dismantling as required. 6 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way double door( L&T/Siemens/Hagger and DJB approved make ) 7 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole ( L&T/Siemens/Hagger and DJB approved make ) 8 Supplying and fixing following 63 amp, double pole, 240 volts, DP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.(L&T/Siemens/Hagger and DJB approved make ) 9 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 5/6 amps switch 10 (b) 3 pin 5/6 amp socket outlet 11 (c) 15/16 amps switch 12 (d) 6 pin 15/16 amp socket outlet 13 Supplying and fixing the following size/modules G.I box along with modular base and cover plate for modular switches in recess etc as required.6 module ( 200mm x 75 mm ) 14 Supplying andfixing of suitable size G.I box with modular plate and cover in front or surface in recess including providing and fixing 6 pin 5/6 & 15/16A modular socket outlet and 15/16 A modular switch, connection etc 15 Supplying and fixing of brass batten/angle holder including connections etc as required 16 Supplying and fixingstepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required 17 Supplying and fixing of following sizes of medium class PVC conduit/Batten along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 20mm 18 (b) 25 mm 19 Supplying of 48 ( 1200 mm ) ceiling fan with all accessories and making connection etc as reqd. at site ( Havells/ CG / Orient/DJB approved ) 20 Supplying of 36 watt Higher Wattage Decorative ultra slim aluminum LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. ( Make : Crompton/Havells/DJB approved ) 21 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE alumium conductor cable of 1.1 KV grade as required 4 x 16 sq. mm ( 28 mm ) 22 New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. 120 watt 23 Installation of LED light 120 Watts on street light Pole after erection with all safety measures with the help of skilled labour/technician as required. 24 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) 25 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1.KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm 26 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 27 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 28 Supplying and fixingof 65 mm dia G.Istreet light pole , 4.5 mtr long approx heavy duty complete with 65/32 reducer including1 x 1 G.I base plateetc. as reqd.at site 29 Erection of G.I pole of length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre 30 Supplying and fixing of 32 mm dia X 1.80 metres long G.I. pipe(medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to therequired shape, 1 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finishpaint etc. This also include supply & fixing of 2 Nos,32 mm dia X 1.80 metres long G.I. pipe with bend for junction box. 31 Supply of SMC junction boxes anti-corrosive water resistant, UV protected, High temp resistant, weatherable and suitable for all kinds of climatic conditions. Self-colour fire retardant and high dielectric strength maintenance free. Make: Bajaj / Hensel / Syntex/Other DJB approved make 32 Installation of junction boxes on the each pole with the help of clamps, nut & bolts etc. The junction boxes should have Mini SP C-series MCB of 6 A 33 Supply of XLPE insulated, PVC sheathed Al. conductor Armoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 4C x 25 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved. 34 Supply of XLPE insulated, PVC sheathed Al. conductor Armoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 4C x 16 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved. 35 Supply of XLPE insulated, PVC sheathed Al. conductor Armoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 3 x 6 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved. 36 Painting of street light poles with Primer and 2 Coats of High gloss Enamel Paint. Make:- Asian/Berger/Nerolac. 37 Supplying of100 watt flood light fittingpressured dia cast housing with IP65 protection efficient high 220-240V output emitter LED for better distribution with dimension 447 X 163 x 327 mmand 6500 colour with lumens 15500 with all accessoires etc as etc as reqd. at site.( Make : Crompton/Havells/DJB approved ) 38 Installation of LED light flood light 100 Wattswith all safety measures with the help of skilled labour/technician as required. 39 Supplying and fixing of angle frame of suitable size ( 50 x 50 ) including excavation and repairing the same etc as reqd. at site. 40 Supplying ,installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 3 output (1output per phase) and suitable for three phase supply power supply connections Incomer -200 amp MCCB 36 KA– 1 No., outcomer - 100 amp - 3 nos 36 KA , TPN Amp - 3 nos DP MCB-6 No. , 3 No’s indicating LED fittings with 6 amp SP MCBs - 10 nos etc as required 41 Supplyingand laying of 40 mm HDPE flexible PVC pipe complete with all accessories i/c jointing and making good the same etc as reqd. at site 42 Installation of ceiling fanwith all safety measures with the help of skilled labour/technician as required. 43 Supplyingand laying of 2 x 2 PVC Heavy duty box complete with all accessories i/c jointing and making good the same etc as reqd. at site( Syntex make ) 44 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required for 2 runs. 45 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. as required. 46 Providing and laying earth connectionFRL Som earth electrode with 6 SWG dia G.I wire in 15 mm G.I Pipe FRL som earth electrode including connection with G.I thimble excavationand refilling as required. 47 Loading, unloading, cartage and transportation charges for the abovepole upto the side i/c charges of heavy labour etc. as per site requirement. 48 Testing and commission of complete work in the presence of Engineer-in-charge with full satisfaction.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 6
36.
Defence #10735412 AOC
Tender For Comprehensive Maintenance Of Otm Accn At Dscc Under Ge Dronachal; 1 Demolition of Brick or Stone Masonry built in cement mortar etc completecomplete all as specified and directed. 2 M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge 3 M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge 4 Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) incl tiling if any complete all as specified and directed 5 M&L forcement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as infoundation, filling, subbase and mass concrete complete all as specified & directed. 6 M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed 7 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 8 M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:4) complete all as specified and directed. 9 M&L glazed ceramic colour tiles, in vertical surfaces350x 250x 7 mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:3) as in backing coat complete all as specified and directed. 10 M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished,area of each tile not exceeding 0.36 Sqm as in floors over and including 20mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified& directed 11 M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished,area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM 1:4 set& jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed. 12 M&L Sand filling under floor/pavementor in foundation including watering and consolidation 13 M&L machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006of 60 mm thickness M-35 grade with grey cement andpigment (reflective type) complete all as specified and as directed. 14 M&L Granite of 20mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps,jambs,pillars, window cills,cooking platforms, wash basin counter and likeover and icluding 20 mm screed bed in CM 1:3all as specified and directed. 15 M&LPCC 1:2:4 type B1(using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, mass filling/ levelling coarse as it bedding coarse and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed 16 M&L for Taking down of cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed 17 M&L for 20 mm thick rendering in CM 1: 4 on faces of brick or concrete surface, shall be done in two coats comprising 5mm thick in CM 1:4 mixed with water proofing compound @3% by weight of cement and over a backing coat of 15mm thick in CM 1:4and finished with trowel to an even and smooth surfaces without using any extra cement complete all as specified and directed.Note : Water proofing compound shall be measured and paid in respective item 18 Supply only Integral water proofing compound 19 M&L for 15 mm thick renderingbrick or concrete surface in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. 20 M&L for 10mm thick rendering onfair faces of brick or concrete surface in cm 1:3 finishing the surfaces fair & even without using extra cement as in ceiling complete all as specified and directed. 21 M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement basedputty complete all as specified and directed. 22 M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by the Engr-in Charge. 23 M&L for prepration of new ceiling surfaces, applying 3coat of white wash on ceiling all as specified. 24 Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge 25 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge 26 Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips(Glass pan, floor hydraulic spring handles, mortice lock and tower bolt will be measured and paid separately) area exc 1.50 sqm but n.exc 4.00 sqm each 27 S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified. 28 Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solovent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in M.S. frame welded sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site as per specification and drawing. 29 S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. 30 Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed. 31 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed 32 S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed 33 M&L12mm thick Prelaminated particle board, exterior grade,prelaminated both side with decorative choice lamination , fixed to aluminium door, partitions complete all as specified and as directed. 34 S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified. 35 S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kgaluminium extruded section body complete all as specified and as directed. 36 S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed 37 S&F for 150 mm aluminium handles, cast type, anodised complete all as specified. 38 S&F for ISI Marked 200mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified. 39 S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. 40 S&F for 100mm Mild steel butt hinge complete all as specified and directed. 41 S&F 4-levers Aluminium Mortice lock, vertical type, size 100 mm complete all as specified and directed 42 M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 43 S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified. 44 Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any positionincluding cover filletscomplete all as specified and directed 45 S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specifiedcomplete all as specified and as directed. 46 M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paidseparately) complete all as specified and directed 47 Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as spfd. 48 Dismantling timber scantlings 40 sq. cm and over in section, for unframed work in any position complete all as specified and as directed. 49 S&F steel work as in rafter, purlins, posts tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) including postspecial shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 Complete all as specified and as directed. 50 S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steelsheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas,fixedwith self tapping screws complete all as specified & directed 51 S&F in repair 6mm thick coloured polyicarbonate sheet (ISI marked) with shelf drilling steel screw with washer on roof and joint of two sheet will be filled with silicon weather proof sealent and cover with aluminum strip of size of 50x3 mm top and bottom and fixed with shelf drilling steel screw with washer on roof complete all as specified and directed. 52 S&F in repair for 3 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with bolts and washer in roof, wall etc complete all as specified. 53 Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 54 Supplying and laying of GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. 55 Taking up or down 20mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 56 Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. 57 Taking up or down 25mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 58 Supplying and laying of GI tubing Dia 25mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. 59 S&F 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. 60 S & F in repair of ISI marked 15mm bore stop valves/angle valve concealed fancy type cast copper alloy, chromium plated with long shank and cup , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. 61 S&F 15 mm Pillar taps, cast copper alloy, chromium plated fancy type, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed by engr in charge.Make : Prayag or equivalent 62 Supply and fixing in repair for ISI marked 15mm bore, fancy type bib tap of chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. 63 S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. 64 S & F for in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge 65 S&F brass chromium plated tubular towel ring complete all as specified and as directed by the Engineer-in-Charge 66 S & Fbrass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge 67 S&F in repair for vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm,waste coupling, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by the Engineer-in-Charge. 68 S&F in repair vitrous china white oval type under counter WHB of size not less than 195x600x425mm of first quality fixed all as specified and directed. 69 S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge. 70 S&F in repair vitreous china wash down water closed pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed. 71 Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge 72 S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader complete all as specified and directed. 73 S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall with PVC clamps complete all as specified. 74 S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified. 75 Supply & Fixing repair PVC Bath Cabinet mirrorcomplete all as specified and as directed by the Engineer-in-Charge 76 S&F in repair brass CPwall mixer for mixinghot and cold water screwed down for iron pipe and fixed. 77 S&F in repair brass CP centre hole mixer for (WHB) mixinghot and cold water screwed down for iron pipe and fixed 78 S&F in repair waste coupling 40mmsuitable size for kitchen sink of PTMT (half or full threaded) complete all as specified and directed 79 S&Fin repair40mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed. 80 S&F in repair 32mm bore PVC waste pipe for wash basin one mtr long complete all as specified and directed. 81 S&Fin repair 100mm dia CPgrating (Minimum weight 25 gms) all as specified and directed. 82 S&Fin repair PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified and directed. 83 S&F in repair Plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 84 S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd & directed 85 S&F in repair for replacement of Jet spray with holder on EWC in repairs all as specifie and directed complete Make : As per sample approved by GE 86 S&F in repair health faucets CP with 1.2 mtr long CP flexible pipe complete all as specified and as directed. 87 S&F in repair two way C.P. Bib cock 15mm dia complete all as specified and as directed. 88 Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed 89 Hoisting & Fixing 500 Ltr rotational moulded polyethylene water stotage tanks(cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. 90 Hoisting & Fixing 1000 Ltr rotational moulded polyethylene water stotage tanks(cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. 91 M & L for preparation of old plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required sharde & colour, as per manufacturers specification over a coat of 1mm thick putty complete all as specified and directed by the Engr-in Charge. 92 M & L for preparation of old plastered/unplastered surfaces of Ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required sharde & colour, as per manufacturers specification over a coat of 1mm thick putty complete all as specified and directed by the Engr-in Charge. 93 M&L for preparation of old plastered/unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. 94 M&L preparation of old surface of ceiling and applying Two coat white wash complete all as specified and as directed 95 S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified 96 M&L Preparation of old decorated surfaces of wall/ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand removing stopping nails and applying two coat of plastic emulsion on walls/ceiling over primer and a coat of 1mm thick white cement based wall care putty all around including complete sanding of existing surface treatment with sand paper or iron patti / flat / mechanical sanding machine complete all as specified and directed. 97 M&L for Preparation of old painted surfaces of Steel/ steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified. 98 M&L for preparations ofold wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified and directed. 99 Waterproofing of terrace with Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnaum Product code 5662 OR Berger PU RoofKoat 100 (A) Surface Preparation(i) All surfaces should be dry and free from contamination such as oil, grease, loose particles, decayed matter, moss, algal growth, laitance and all traces of shutter release oils and curing compounds.(ii) All loose and de-bonded concrete/ screed shall be removed and proper repairing to be carried with polymer modified mortar. Washing the roof-terrace surface and making it dust free.(iii) The careful sealing of existing cracks & joints before the application is extremely important for log lasting waterproofing results. Clean concrete cracks / hairline cracks, of dust, residue or other condemnation. Fill all prepared cracks with acrylic flexible crack filler Dr. Fixit Cracks-X Paste OR Asian SmartCare CrackSeal OR Berger Homeshield Crackfill Paste.(iv) Cracks more than 5mm fill all repaired with Polymer modified cement sand mortar in the ratio of 1:3 duly admix with Dr. Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus @ 10% by weight of cement.(v) Pre wet the surface prior to application of primer and allow surface water to evaporate to make surface saturated dry (SSD) condition 101 (B) Bond Coat(i) Applying Dr Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus a SBR latex based bonding chemical used for repairs & waterproofing, at a ratio 1:1 one part chemical one part cement. Make sure bond coat is done properly and spreader evenly to the entire surface with brush or roller. 102 (C) Pre-Coat Application(i) Applying one coat of Dr. Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus with cement @ 1:1.5 one part chemical, one and a half part cement and lay 45 GMS fiber mesh on still wet coat of URP. Make sure fiber mesh sticks to the surface evenly. 103 (D) Primer Application(i) Apply one coat of acrylic based primer Dr. Fixit Primeseal Primer OR Asian PU Magnum Resin & Asian PU Magnum Hardner OR Berger SealOPrime (diluted with water in the ratio of 2:1) spreading at the rate of 8-10 /Sq.mt /Litre. Allow the primer to air cure for 4-6 hours.(E) Coating Application(i) Stir well before use. Apply 1st coat of Dr. Fixit HydroShield PUD plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. 104 (E) Coating Application (Contd(ii) Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat and 3rd coat at 90° to the second coat. Ensure there are no pinholes or air bubbles on the membrane surface. (iii) Apply second coat of Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/ Coat. Ensure there are no pinholes or air bubbles on the membrane. (iv) Apply third coat of Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/ Coat to achieve total dry film thickness of 800 to 1000 microns at forced coverage @ 2- 2.1 /litre/Sq.mt in 3 coats. Ensure there are no pinholes or air bubbles on the membrane. (v) Make sure glass fibre mesh is completely embedded. Surface should be smooth after the application. Check to see no void surface is left untreated / uncoated.(vi) All the concrete / masonry pedestals present on the roof, constructed for supporting the water tanks or pipe lines or dish antenna/solar panel, etc., also should be coated with extra coat of same material incorporating reinforcing fabric.(vii) Allow the system to air cure for 7 days prior to carry out ponding test.Note:- System comes with 10 years waterproofing warranty from Manufacturer or Authorized Applicator. 105 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. 106 M&L for point wiring with and incl 1.5 sqmm (nominal area) PVC insulated multi-stranded copper conductor FRLSH in and incl PVC casing and capping ISI marked 20/30 mm size or as required at site incl with its fittings and fixture such as tees, bends, elbows and juction boxes all moduler type surface mountingetc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal complete all asspecified and directed.Note :- Modular PVC Surfacemounting boxes and for mounting switch ,socket withmodular frame plate and covercomplete all as specified and directed 107 (a) One light/Fan/Exhaust fan point controlled by one switch. 108 (b) One 3 pin socket outlet 5 Amps on independent board. 109 (c)One 3 pin socket outlet on same board. 110 M&L for wiring complete 2.5 Sq.mm single core multi standard copper conductor FRLS PVC insulated 650/1100 Volts drawn through non metalic rigid PVC casing capping including necessary accessories like bends lees and elbows etc fixed on wall/ceiling including sunken type pressed steel terminal boxes of suitable size with plastic laminated white/coloured top sheet cover 2 mm thick including 1.5 Sq.mm FRLS PVC insulated copper green wire for earth wire complete for 3/5 pin 15 Amps switch socket combination complete all as directed by Engineer-in-Charge. 111 S&F in repairs modular switch flush single pole one way 6 Amps. 112 S&F in repairs socketmodular outlet 5 pin with gang box 6 Amps 113 S&F in repairs socket modular outlet 5 pin 15 Amp with gang box multipurpose. 114 S&F in repairs modular switch flush single pole one way 15/20 Amps. 115 S&F in repairs sheet metalsingle pole and neutral encloserwith a two pin and earth plug and socket complete with one MCB SPN 20 amps, 240 V. 116 S & F in repairs Modular AC Box With 20A SP MCB, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top 117 Supply and fixing in repair of MCCB forDPX 415 Volts 100 Amps 4 pole with breaking capacity of 25 KALegrand/ Schinider/ C&S 118 Supply & Fixingin repairs MCB DB TPN 415 Volts 200 Amps rated bus bar having 4 way single door shutter. 119 Supply & Fixingin repairs MCB DB SPN240 Volts 200 Amps rates bus bar having 4 way double door shutter. 120 Supply & Fixing in repairs MCB DB SPN 240 Volts 200 Amps rates bus bar having 8 way double door shutters. 121 S&F in repairs MCB TPN 415 Volts of capacity 63 Amps complete all as directed by Engineer-in-Charge. 122 S&F in repairs MCB SPN 240 Volts of capacity 40 Amps complete allas directed by Engineer-in-Charge. 123 S&F in repairs MCB SP 240 Volts of capacity 5 to 30 Amps complete allas directed by Engineer-in-Charge. 124 S&F sub main wiring4 Sqmm with three runs of 4 sqmm single core multi stranded copper conductor in PVC conduit including all fitting fixed on wall/ceiling including4 Sqmm PVC insulated copper earth wire connected to earth including taking down, complete all as directed by Engineer-in-Charge. 125 S&F sub main wiring6 Sqmm with three runs of 6 sqmm single core multi stranded copper conductor in PVC conduint including all fitting fixed on wall/ceiling including6 Sqmm PVC insulated copper earth wire connected to earth including taking down, complete all as directed by Engineer-in-Charge. 126 Supply & fix in repairs recess mounted LED 15 Watt Ultra slim recess-mounting round LED downlighter designed with excellent thermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished in epoxy powder-coated white to deliver high-efficacy light output and uniformity, utilising edge-lit technology. 127 Supply & fix in repairs ceiling mounted LED light fitting 36 Watt Recess-mounting ultra-slim LED 2x2 edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge. . 128 Supply & fixin repairsceiling mounted LED light fitting 36 Watt surface panel ultra-slim LED 2x2 edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge. . 129 S&F in repairs LED flood light fitting 150 watt LED floodlight luminaire High-efficiency IP65 innovative LED floodlight with pressure die-cast aluminium housing and toughened glass in the front with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventional system 130 Supply & fixin repairs Wall mounted LED - 20 W Linear Aluminium High Lumens output LED batten made from aluminium extruded channel, powder coated with opaque diffuser for glare free light complete with accessories all as specified and directed. 131 Supply & fix in repairs Wall mounted LED batten 10 watt LED - Linear Batten made from Polymer extruded channel, with opaque diffuser for glare free light, complete with accessories all as specified and directed. 132 S&F in repairs LED lamp 9/10 W, 230VAC, 50Hz, cool white single phase with all fitting and fixing accessories complete all as specified and directed. 133 S&F in repairs LED inverter lamp 20 W, 230VAC, 50Hz, cool white single phasewith all fitting and fixing accessories complete all as specified and directed. 134 S & F in repairs modular stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd 135 S&F in replacement piano type switch single pole 230 volt flush type 5 Amps 136 S&Freplacement piano type switch single pole 230 volt flush type 16 Amps.(Normal switch) 137 S&F in replacement switch socket combination withpvc gangbox 6/16 Amp as per existing ISI mark.(Normal type) 138 S&F in replecement switch socket combination with pvc gangbox6 Amp as per existing ISI mark. 139 Supply and fixing in ,replacement ELCB 63 Amps, 4 pole 140 S & F in repairs Modular Metal flush box 3 module 141 S & F in repairsModular White cover plate 3 module 142 S & F in repairs Modular Metal flush box 6 module 143 S & F in repairsModular White cover plate 6 module 144 S& Fin replacement of PVC 3 Pin plug top 15 Amp complete as specified 145 S& Fin replacement of PVC 3 Pin plug top 5 Amp complete as specified 146 S&F energy saving and enviornment friendly long life LED security light fitting 1 x 36W LED, versatile, pressure die cast aluminium IP-66 protection with high power LED as light source and arcylic cover etc incl all accessories prewired complete including mounting on bracket and necessary connection to ceiling rose etc & suitable bolts and nuts with washers, connecting with PVC insulated multi stranded copper flexible cable of size 0.5 Sqmm three core from ceiling rose to fittingincluding taking down the old one, complete all as specified and directed. 147 M & L for Servicing of1200/1400 mm ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes and painting including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge. 148 M & L for Servicing of 250/300/350mm Exhaust Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge. 149 Supply and fix building security light bracket, bend to 120 degree angle, made out of 32 mm bore, galvanised iron, light grade tubing (approx 1.2 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc.and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed. 150 Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron wire of4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and earth wire protected by galvanized pipe light grade 40 mm bore and thorugh test point including necessary earth work and excavation in any type of strata, andGI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm kdia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete 151 M&L earthing complete with copper plate of 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level withcopper strip 20 x 3 mm as earthing lead including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixedin continuous layer 15 CM all around the plate and balance pit will be filled with vigitable soil approved byengineer in charge, PCC (1:3:6 ) type C1 in chember ,Precast 50 mm thick in cement ( 1: 2:4) type B.1 with CI framewith cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe of suitable size protection for earthing lead from earth pit to test point complete & making connection 152 M&L for installing and commissioning Copper coatedChemical Earthing electrode oflength 3 mtr, inner dia of 40 mm and outer pipe of dia 76 mm with minimum thickness of 250 micron, after boring 20 metre deep, 150 mm in diain hard/soft soil with help of boring machine,filling the bore hole withblack cotton soil upto 17 mtrs level i.e below the electrode bottom level, filling remaining portion by pouring suitable chemical bentonide compoundduly mixed with water and filling earth enhancement material (minimum approx. 30 kg) into the augured hole in slurry form and allowed to set, covering of the composite structure (earth electrode + earth enhancement material), covering remaining portion with backfill soil/ material, welding copper strip with existing head of earth electrode including necessary PCC earth pit work and including all necessary nut, bolts, washers etc complete 153 Taking down unserviceable geysers of any capacity and make from each location by disconnecting and sealing all electrical and water lines for annual maintenance/servicing. Overhauling, dismantling the same for repair/replacement of unserviceable parts, including brazing to inner tank, cleaning, taking out sludge from inner tank and washing with cleaning solution and reassembling and refixing the same in each original location/ position, connecting all electrical and water connections including provn of 2.5 Sqmm 3 core sheathed multi-stranded copper conductor flexible cable from connector block to geyser and testing complete all as specified and directed. (NOTE (a) New parts shall be measured and paid separately under Supply only rates here-in-after. (b) Minor parts, if any, not mentioned in the schedule but required for smooth functioning of geysers are deemed to be included in the rate of the item.) 154 Supply only PVC inlet pipe, 15mm bore, 450 long including both end check /end nuts and washers. Make 155 Supply only PVC steel braided outlet connection pipe, 15mm bore, 450 mm long including both ends check nut & washer complete. 156 Supply only heating element of any type 1500 Watts. 157 Supply only heating element of any type 2000 Watts. 158 Supply only thermostat of any type suitable for 25 ltrs capacity geyser. 159 Supply only internal assembly complete with packing ring, bolts, nuts & washers suitable for 25 ltrs capacity geyser. 160 Supply only thermal cut off ISI marked suitable for 50/35/25 ltrs capacity geyser. 161 Supply only fusible plug made of brass having lead alloy fuse suitable for 25 ltrs capacity geyser. 162 M & L for painting geyser of capacity 25 ltrs complete, in situ, with two coats of synthetic enamel paint, white, by spraying including filling cavities with filler, denting after scrubbing down old paint using emery paper, cleaning, washing etc. and writing MES No complete all as specified and directed. 163 S&F in repairs change over 32 Amps 4 pole 415 V complete all as directed by engr-in-charge. 164 S&F in repairs change over 63 Amps 4 pole 415 V complete all as directed by engr-in-charge. 165 Attending daily complaints of DSCC and 14 Acre land area by deputing adequate number of Skilled teams of qualified Electrician and helper any time of the day ( Minimum 01 Skilled Electrician & 02 Helper ) for repair / tightening of end terminals of street light fitting, Flood light, LED strip on poles , High Mast light , Post top lanten of any size/capacity at anyheightand repair the street lights, Flood lights and Post Top lanten having minor faults i.e loose connections, carbon deposition , Shiftingand refixing the same etc and makethe light functional.After rectifying the defects of the electricalsystemreplace the U/S items such as street light , flood lights, LED strips, MCBs TPN ,connection plate , thimbles and timmersmall pieces of electrical cables PVC insulated copper multistranded conductor of sizes 2.5 Sqmm to 6 Sqmm twin core and length not increasing 1.5 mtrs completeall as specified and directed by Engr-in-Charge. (Complaint slip shall be part of the bill) and In Addition one 16 mtrs hight hydraulic vehicle with driver & operatorof the same team will opearte and manage day to day street light Complaints and update the status of complaints on daily basis and confirmed throgh concerned JE E/M daily as per directed by Engr-in Charge. 166 Note:- (i)Complaint shall be done within 24 hrs afterintimation by JE E&M Engineer-in-Charge failling whichpenalty of Rs 250 per day per complaint will be levied on contractor.(ii) One supervisorwill report to JE E/M , Engineer -in-Charge on daily basis with complaint register. (iii) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge.(iv)This item pertains to attending complaints ofstreet light/flood light/LED strips on poles/High mast, MCB, & timer panel including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge.(v)Items shall be measured and paid seperately under respective item of Sch A 167 S&F in repair of Automatic Street Light Switch Three phase with Nature Switch-03 as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load5 KW equally distributed over 3 phase (4 KW/Phase). The contractor rating 25 Amps (4-pole) and MCB(single pole) rating : 20-25 Amps(SP-03 Nos), complete all as specified and directed.Make. Nature Switch Model No SWADEEP-02EC 5 KW3P or equivalent makes in Legrand/L&T/GE. 168 M & L for replacement of LED aviation light luminaries comprising of aluminium housing with polycarbonate enclosure complete Make : Bajaj/Philips/Havells complete after taking down the old unserviceable one all as directed. 169 M&L for taking down High Mast light fittings mounting on cage from High mast pole of 12.5/16/20 mtrs heightfor repairing of LED/MH light fitting of any size/type and reinstalling the fitting/cage back to its position after carrying out repairs all as directed by EIC (Cost of LED spare parts will be measure seperately) 170 M&L for rewinding ofexisting burntmotor 2 HP of high mast light fitting with replacement winding wire and refixing the same alongwith proper alingment with steel rope etcincluding electrical connection and testing complete all as directed by Engr-in-charge. 171 Supply and replacement of Existing High mast panelfront door openable with 3.0 mmthickness MS sheet of size 0.9x0.6x0.6mpowder coating paint including locking arrangement , Panel internal wiring of suitable size wire alongwith 63 Amp MCCB as incomer and 03 Nos 40 Amps MCB as outgoing and mounting on 40x40x6 mm MS angle and grouted in PCC completeincluding one coat synthetic enamel paint complete all as per directed by Engr-in-charge 172 Supply and fixingin replacementoutdoor type IP66 thermoplastic polycarbonate cable entry junction box of size 155 x 210 x 92 mm, weather proof with knockouts for cable entry- black colour with necessary cable connector link inside the box and fixing arrangement by clamp, nut bolts etc fixied on pole/ walls complete all as specified and as directed. Make - 173 Supply & fixing in replacement of new generation energy saving and environmental friendly long life LED street light 60 watt made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07by using 2 core PVC insulated cable aluminium conductor 2.5 Sqmm approx 2 m length complete all as specified and directed.Make : Havells, Cat No-ENDURAPEARLNEOL60WLED757PASYTOPC or equivalent of Philips/Jaquar. 174 S&F in repairs aluminium strip of size 25 x 4 mm fixed to wall/ pole with aluminium saddles andscrews for roof/ down conductor above ground/ buried in ground/ drawn in conduit/ fixed to poles or any other indicated situation for loop earthing including connected upto test terminal point complete all as specified and directed.Note : - Insulators/conduit/pipe shall be measured and paid separately under appropriate items here in after 175 S&F in repairs Copper strip of size 20 x 3 mm fixed to wall with copper saddles andscrews drawn in conduit/ fixed to poles or any other indicated situation for loop earthing including connected upto test terminal point complete all as specified and directed.Note : - Insulators/conduit shall be measured and paid separately under appropriate items here in after 176 S&F in repairs fixing Galvanised iron strip of size 32 x 6 mmfixed to wall with Galvanised iron saddles andscrews / buried in ground/ drawn in conduit/ fixed to poles or any other indicated situation for loop earthing including connected upto test terminal point complete all as specified and directed.Note : - Insulators/conduit/pipe shall be measured and paid separately under respective item of works
Contract Date: Apr 25, 2026 Contract Value : 21.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Madhya Pradesh View Result →
37.
Rural Development #10733231 Price Bid
Conservation And Beautification Of Waghapur Lake Tal. Bhudargad Dist. Kolhapur- 1 Sub-work No. 1 -Desilting, Deweeding and Dewatering Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material up to a distance of 50 metres beyond the building area and stacking as directed ,including dewatering, preparing the bed for the foundation and necessary back filling with a vailable earth / murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 2 Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres. from the building area including dewatering and backfilling with available earth soil / murum watering, ramming etc. complete. (Lift upto 1.5m) By Mechanical Means 3 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary forfoundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. ( prior approval of Super intending Engineer will be necessary) 4 Desilting the Lake in wet or dry condition excluding Conveying materials obtained from Lake beyond the work site, stacking, spreading,etc. complete 5 Conveying materials obtained from Lake including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves,grade sand section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500 m. inclusive, from the site of excavation to the site of deposition as directed.20 % to Farm 6 80 % to Dump Yard 7 Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and a like grass along roadside making the ground clean by showel and phavaras etc. complete. 8 Sub Work No. 2 - Gabion Wall Providing and Constructing gabion structure 1Meter high or required section madeup of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedged including placing inposition, fitting neatly with trap stone rubble (15 to 23 cm ) all loose ends to be securely tied (Excluding transportation) etc. complete. (In Dry condition and for under water installation extra cost to be considered) 9 Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. Layers including watering and compacting etc. complete. 10 Sub Work No. 3 - Earthen Bank Protection WorkExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 11 Excavation for foundation in hard murum and Boulders including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) By Mechanical Means 12 Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / ganite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 13 Providing andl aying Cast in situ / Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is tobe provided ( Excluding reinforcement and structural steel ) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 14 Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 15 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars,bindingwith wires or tack welding and supporting as required complete. 16 Filling in plinth and floors with approved excavated material in 15 cm. to 20cm. Layers including watering and compacting etc. complete. 17 Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc. complete. 18 Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. 19 Sub Work No. 4 - Ghat Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 20 Excavation for foundation in hard murum including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) By Mechanical Means 21 Providing soling using 80 mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 22 Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap / granite / quartzite / gneiss metal in foundation including necessary formwork, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) 23 Providing and laying insitu / ready mix M-20 cement concrete of trap / granite / quartzite / gneiss metal for approach slab / Rigid pavement including compacting ,finishing, curingetc. complete. (excluding reinforcement ) (with reversible drum type mixer /concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) 24 Providing selected hard murum filling including laying in layers of 15 to 20 cm with watering and compacting etc. complete. 25 Providing andl aying Cast in situ / Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is tobe provided ( Excluding reinforcement and structural steel ) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 26 Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, coverblocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 27 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars,bindingwith wires or tack welding and supporting as required complete. 28 Sub Work No. 5 - Stone Pitching Excavation for foundation in hard murum and Boulders including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) By Mechanical Means 29 Providing selected hard murum filling including laying in layers of 15 to 20 cm with watering and compacting etc. complete. 30 Providing dry rubble stone pitching 23 cm (about 9 inch) thick including all material, quarry spalls, labour etc. complete. 31 Sub Work No. 6 - PathwayExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 32 Providing dry / trap / granite / quart zite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 33 Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening the mif special finishis to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 34 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram / Sq. cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 35 Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap /granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items in cluding bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed. ), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 36 Providing and fixing Guard Railing of 1000 mm height as per Type D Drg. No. 15 dt . 20 - 4 -79 , and fixed in 40 x 40 x 6 mm iron, angle embedded in 1:2:4 cement concrete bedding patti as per detailed drawing, with 3 coats of approved of yellow and black paint. 37 Sub Work No. 7 - Public Toilet BlockExcavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) 38 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd�A-3/259) 39 Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) 40 Providing and laying in situ Cement Concrete M-10 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) PCC M - 10 41 Providing uncoursed rubble stone masonry of trap/ granite/ quartzite/ gneiss metal in CM 1:5 for foundation of piers, abutments, wings etc. including bailing out of water, striking joints, scaffolding and watering etc. complete. 42 Filling in plinth & floors with approved excavated materials in 15 cm layers including watering &compacting complete 43 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) R.C.C. LINTEL-150 44 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 45 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Slab M200 46 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete(including cost of binding wire). (Bd-F- 17/306)TOR Steel 47 Providing and fixing M40 grade tick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S.65241983 having 6mm dia.bars3 Nos. And stirrups @ 250 mmc/cand fixing in wall with 6 Nos of hold fast of 12mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . 48 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron holdfast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. 49 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50mm thick with 3mm diameter mild steel bar reinforcement,of approved design on both side, fixing in cement mortar 1:3 and curing etc. complet 50 Providing internal cement plaster 12 mm thick in a single coat in C.M.1:3 without neru finish to masonry , concrete surface in all positions including scaffolding and curing complete. 51 Providing and laying matt finish ceramic tiles of having size 30 cmx 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 52 Providing and laying cement concrete flooring 40mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cmx30cm or other size laid diagonally/square etc finishing smooth (with extra cement )in any colour as directed and curing etc.complete.with Crushed sand VSI Grade 53 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to correspondng I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 54 Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black back lite seat with all necessary pipe connection etc. complete. 55 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm. x 30cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 56 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. 57 Providing and fixing on walls/ceiling/ floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portionetc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 58 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.complete. 59 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/ waste pipe and with necessary fxtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer 60 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 61 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 62 Providing and fixing Bib cock stop tap of brass heavy of 15 mm dia. At site of work 63 Providing and fixing partition with kadappa stone of all size sand 25 mm thick polished on both side and edge stoorig in a lncluding fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete. 64 Name plate with wording as directed on plastered srface in oil painting 65 Providing and fixing orissa type colour glazed earthen ware 625x450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the outside face of wall including 100mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. 66 Sub Work No. 8 - Compound Chainlink FencingProviding and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle ( 50 x 50 x 6mm ) postat 2.5 m c/c including excavation of pits of foundation concrete fixing the posts in (1:4:8) cement concrete block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc.complete 67 Sub Work No. 9 - Beautification Work(Environmental Awareness, Benches, Solar Street Light, Dustbin, Sign Board, Open gym, Children Play Equipment) Providing and fixing VIP Bench CI Frame height 5.48 mêter and weight 30 kilogram Decorative Leg, Seat plates FRi Patrujan hot press size metre x 1.20 metre long, wood finish, both side PP Cap for fixing 12.5 milimeter Stainless steel Nut bolt toatal 9 seat plates etc complete. 68 Providing and Fixing Solar Street light. Power Output > 75 Wp at 16.4 +- 0.2 Volts at STC,Battery Capacit > 12.8V (nominal), 30 Ah at STC (1 Day Autonomy), Type of LED 20 Watt white LED Type,Ingress Protection IP 65 or Better,Indicator on The system - 2 LED Indicators Red and Green. 69 Providing and Fixing Pegwin Shape dustbin FRP 3 feet height, baok side door size 1 feet x 1 feet for removing garbage in fixing concrete etc. complete. 70 Providing and fixing road junction/ information sign boards of size 1.80 x 1.20 Meter Prepared 16 guage M.S.sheet on frame of size 40x40x5 mm with cross bracing of size 35x35 x 5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral /arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection includingtwo angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc. complete.Mild Steel Board with Engineering Grade. 71 Providing and fixing informatory sign boards of size 0.90 x 0.60 m made out of 14 guage Aluminum sheet bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including on frame of with angle iron frame of size 35 x 35 x 5 mm and two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in 1:4:8 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Alluminium sheet Type IV High Intensity Micro Prismatic Grade Sheeting 72 Providing and Fixing Open Gym Equipment.Providing and fixing Sit Up Board made from B class Galvanized Iron. pipe. The main frame is of 25 millimeter Nota bene made from C Class Galvanized Iron. Pipe, Perforated sheet of 2 millimeter thickness is welded on main frame. The remaining frame of the sit up board is of 40 millimeter and 50 millimeter Nota bene made from C class Galvanized Iron. pipe. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat. The top coat is done using the best quality brand paint or duly powder coated. 73 Providing and fixing Sky Walker made from B Class Galvanized Iron.Pipe. The main frame is Diameter 80 millimeter made from C class pipe. The outer ring of sky walker is Diameter 32 millimeter made from C Class Galvanized Iron Pipe. For connecting the handle frame to main pipe Diameter 60 millimeter C Class Galvanized Iron Pipe is used. The bottom support of Mild Steel, round plate of Diameter 250 millimeter X 10 millimeter thickness is welded at bottom. The leg movement frame is of 50 X 50 millimeter X 2 millimeter thick cyclic redundancy check square pipe. The handle frame is of Diameter 40 millimeter made from C* Class Galvanized. Iron Pipe. The foundation used for fixing is 80 X 40 millimeter X3 millimeter thickness C-Channel. The footrests is made from Aluminum casting material, its sizes are 130 X 310 X 5 millimeter Closing caps made from top quality Fibre-reinforced plastic material with 2 millimeter thickness and Plastic cap are used. The pins used bearing of reputed make (SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of 25 millimeter The powder coat is done by Poly urethane and epoxy powder with 60 to 70 micron thickness. 74 Providing and fixing cross trainer made from B class Galyanized Iron.pipe. The center pipe is of 80 millimeter Nola bene made Tram C Class Galvanised Iron. pipe, and the bottom support of Mild Steel Round plate of 250 millimeter dare an a rat ho tomieter thickness is welded at bottom. The handle frame is made up 25 millimeter Nota bene C Class Galvanized Iron. Round Pipe. The foundation used for fixing is consists of three equal items that is. 100 millimeler Nota bene made from C Class Galvanised Iron. Round Pipo, Mild Steel Round Plate of 250 millimeter diameter and 10 millimeter thickness, 25 millimeter X 25 millimeter Mild Steel Angle of 3 millimeter Thickness. To join the Centre pipe and handle Frame Seamless Pipe of 50 millimeter origin destination and 3 millimeter Mild Steel Angle of 3 millimeter Thickness is used. For the movement, Bushes are used and for it 60 millimeter origin - destinatior and 3 millimeter thickness. The footrests is made from Fibre-reinforced plastic/C.1/Aluminum casting material, its size are 130 millimeter X 300 millimeter and 300 millimeter and 5 millimeter thickness. For support of Footrest of Cross trainer 130 millimeter X 300 millimeter with § millimeter thickness Mild Steel Plate and 50 millimeter X 50 millimeter cyclic redundancy check Square pipe with 3 millimeter thickness is used.Closing caps made from top quality Fibre-reinforced plastic material which is of 2 millimeter thickness. The pins used is made up of 25 millimeter diameter Harden bright bar. The bearings used are of 6205 permanent lubricated sealed bearing of reputed make. The handles used for cross trainer are of Rubber grip. The nut bolts used for assembly are made from S.S. material. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated 75 Providing and fixing chest press made from B Class Galvanized Iron. Pipe. The Center Pipe is of 100 millimeter MB made from C Class Number Galvanised Iron. Round Pipe, and the bottom support of Mild Steel Round plate of 250 millimeter and 10 millimeter thickness is welded at bottom. The remaining frame is made up of 40 millimeter Not bene C class Galvanized Iron. Pipe. The handle frame is made up of 25 millimeter Nota bene C* Class Galvanised Iron. Pipe, The seat frame is made up of 40 millimeter Nota bene and 50 millimeter Nota bene C class Galvanized Iron. Pipe. For the assembly different bushes are used for fixing is consists of three equal items that is. 100 millimeter Nota bene made from C Class Galvanized Iron. Pipe, Mild Steel Round plate of 250 millimeter dia and 10 millimeter thickness and 25 millimeter X 25 millimeter X3 millimeter Mild Steel angle. The seats is fitted on the outer frame is made up of high quality Fibre-reinforced plastic material of size 330 millimeter X 330 millimeter of thickness 3 millimeter and Mild Steel Plate of thickness 5 millimeter and size 250 millimeter X 200 millimeter is used to support it. Closing caps are made from top quality Fibre-reinforced plastic material which is of 2 millimeter thickness. The pins used are made up of 25 millimeter and 17 millimeter dia solid bar. The bearing used are 6205 and 6203 permanent lubricated sealed bearing of reputed make. The nut bolt used for assembly are made from stainless steel material. The serclips used for assembly is of 25 millimeter diameter. The Poly Urethin plastic bush is used for handling. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated 76 Providing and fixing Back extension made from B Class Galvanized Iron Pipe. The main frame of diametre 90 millimeter made from C Class Galvanized Iron Pipe, and the leg movement frame is of diameter 40 millimeter made from C Class Galvanized pipe. The handle frame is of diametre 32 millimeter made from C class Galvanized Iron Pipe. The seats is fitt a on the frame is made up of high quality FRP material of size 330 millimeter × 300 millimeter of thickness 3 millimeter and Mild Steel Plate of thickness 5 millimeter and size 250 millimeter × 200 millimeter is used to support it. The Foundation used for fixing is consists of 25 millimeter × 25 millimeter Mild Steel angle of 3 millimeter thickness. The footrests. is made from Aluminum casting material, its sizes are 130 millimeter x 310 millimeter x 5 millimeter. For the support diameter 32 millimeter made from C Class Galvanized Iron Pipe. closing caps made from top quality FRP material with 2 millimeter thickness. The powder coat is done by Poly urethane and Epoxy powder with 60 to 70 micron thickness. 77 Providing and fixing Rower made from B Class Galvanized Iron. Pipe, The main frame is 80 millimeter X 40 millimeter and 40 millimeter X 40 millimeter cyolio redundancy check Pipe with 2 millimeter thickness. The handle frame Is of 25 Nota bene made from C class Galvanized Iron. Pipe. The Foundation used for fixing consists of three equal items that is. 40 millimeter Nota benc made from C class Galvanized Iron. Pipe, C channel of 75 millimeter X. 40 millimeter X 5 millimeter and 25 millimeter X 3 millimeter Mild Steel angle. To join the movement frame to main frame seamless pipe of 50 millimeter diametermeter and 3 millimeter thickness is used. The seats which are fitted on the main frame is made up of high quality Fiber-reinforced plastic material of size 330 millimeter X 330 millimeter of thickness 3 millimeter and Mild Steel plate of size 250 millimeter X 200 millimeter X 5 millimeter is used to support it. Closing caps are made from top quality Fiber-reinforced plastic material which is of 2 millimeter thickness. The pins used are made up of 17 millimeter diametermeter hardened bright bar. The bearings used are of 6203 permanent lubricated sealed bearing of reputed male. The handles used are of Rubber grip. The nut bolts. used for assembly are made from Stainless Steel material. The bushes (Stoppet) used to avoid the collusion made from poly urethane plastic material of 50: millimeter diamefermeter The serclips used for assembly is of 17 millimeter diametermeter. The foundation pipes are embedded in Cement Concrete stock and painting is done by attractive color spraying after proper surface treatment, shot blasting and intial coat of yellow primer surface is plied before top coat. ithe top. coat is done using the best quality brand paint or duly powder coated. 78 Providing and fixing uneven bar made, from B class Galvanized Iron Pipe. The main frame is: 115 milliteter-diametermeter made from C class pipe and. the bottom support: of Mild Steei Round Plate of Diametermeter 250 millimeter and 10 millimeter thickness is welded at bottom. The handle frame istof diametermeter 40 millimeter made from C class Galvanized Iron Pipe. The foundation ised for fixing is consists of three equal item that is diametermeter 90 millimeter made from C Class Galvanized Iron, Mild Steel Round Plate of diametermeter 250 millimeter and 10 millimeter thickness and 25 millimeter × 25 millimeter mild steel angle of 3 millimeter thickness. Closing caps are made from top quality Fiber Reinforcement Plastic material which is of 2 millimeter thickness. The Powder coat is done by Poly urethane and epoxy powder coat with 60 to 70 micron thickness. 79 Providing and fixing Weight Lift as directed by engincer-in-charge 80 Providing and fixing combination leg press + standing twister + seating twister as directed by engineer-in-charge 81 Providing and fixing Air walker made from B class Galvanized Iron pipe. The center pipe is of 80 millimeter Notabene made from C Class Galvanized Iron pipe, and the bottom support of Mild Steel round plate of 250 millimeter diameter & 10 millimeter thickness is welded at bottom. The leg movement frame is of 40 millimeter NB made from C Class Galvanized Iron pipe. The handle frame is of 25millimeter Notaben made from C Class Galvanized Iron pipe. The foundation used for fixing is consists of three equal items i.c. 80millimeter Notabene made from C Class Galvanized Iron pipe, Mild Steel Round plate of 250 millimeter diameter & 10millimeter thickness & 25millimeter X 25millimeter Mild Steel angle of 3 millimeter thickness. To join the centre pipe & leg movement frame seamless pipe of 60 millimeter diameter & 3millimeter angle of 3millimeter thickness. To join the centre pipe & leg movement frame seamless plpe of 60mlllimeter diameter & 3millimeter thickness & 60millimeter thickness.. The footrests is made from FRP/Cast Iron /Aluminum casting Hamaterial, its sizes are 130millimeter X 300millimeter X Smillimeter. For the support 50millimeter X 50millimeter X millimeter CRC square pipe is used. Closing caps made from top quality Fiber Reinforced Plastic material with 2 millimeter thickness. The pins used are made up of 25 millimeter diameter bright bar. The bearings used are6205 permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from Stainless Steel material. The serclips used for assembly are made from Stainless Steel material. The serclips used for assembly are of 25millimeter diameter. The foundation pipes are embedded in Cement Concrete, stock and painting is done by attractive color spraying afler proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint orduly powder coated 82 Providing and fixing Parallel bar of height 1.3 meter Galvanised Iron Pipes of A Class quality. The frathe of the parallel bar shall be of 40 milimeter Nominal Bore pipe. The vertical support pipe shall be embedded with holdfast in Cement Concrete:block of 0.3.X 0.3 X:0.3 meter below ground level. The total play area for the equipment shall be 0.9 X 0,5 meter painting is done by spraying after proper surface treatment and an initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. 83 Providing and fixing Super Max Multi Play System made for roto moulded FRP 4 Tanel slide 1.9 feet dia, with FRP panel made for roto moulded FR$ Tanel Spiral Slide 1.50 metre height, 6 feet length tanel bridge, FRP Panel, canopy made for roto moulded FRP size 3 x 3 feet with 7 feet length ladder including railing 25 millimeter NB Pipe, 10 feet height 80 millimeter diameter Tower Pol, 2milimeter thick platform percoated sheet size 3 x 3 feet, High Tension Blackning, Tanel Slide leg 40 millimeter pipe, Spiral slide main support 75 millimeter dia 5 feet length, all mild steel material used in P.P. Grade powder coating with forpeting process excetra complete 84 Providing and fixing Double Swing with 9 feet leg using 38 millimeter NB Pipe, 10 feet: Top Bar lengch 50 milimeter ISI Mark NB Pipe, Rubber Coated Chain with Suspension, attached rubber sheet, including S type Hook, moulded bearing clarap, P.P. grade powder coating with fospeting complete. including welding and handling charges with mild steel pocket excetra complete. 85 Sub Work No. 10 - Afforestrtion / Plantation -Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means 86 Filling fresh garden soil /silt & manure in excavated area including lead upto a distance of 50 mtrs (1/10 of unskilled labour) 87 Preparing Lawn:- Excavating the ground to a required depth of 30cms.removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure are in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly, well, levelling, watering on previous night. Planting required variety of lawn grass (Cynadon or paspallum) as directed and maintaining till well established by watering, weeding, clipping, rolling etc.complete 88 Preparing flower bed :- Hibiscus (8 x 10) Excavating the ground to required depth of 30cms removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proportion to a height of 40cms. Mixing garden soil & manure thoroughly well, levelling, watering on previous night. Planting well rooted shrubs 0.5 meters apart as directed and maintaining till well established by watering,weeding, stirring, replacing casualties etc.complete. 89 Preparing Shrubbery :- Plumeria Rubra (21 x 21) Excavating the ground to required depth of 30cms removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & MAnure in excavated area in 3:1 proportion to a height of 30cms.Mixing O garden soil & manure thoroughly well, levelling watering on previous night. Planting well rooted shrubs 0.5 meters apart as directed and maintaining till well established by atering,weeding, stirring, replacing casualties etc.complete 90 Mogra Plant/Creepers /Climbers -Excavation pit with size 0.30x 0.30x 0.30 removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.15 mt with fresh garden soil and manure in 3:1 propration.Mixing soil and manure thoroughly well levelling,watering on previous night .planting one or two year old healty plant as per specification Maintaning till well established by watering etc,complet , weeding pruning, sirring replacing casualties. Gardenia Lasmirals (Motha Mogara) 8 x 10 91 Jasmin (Mogara) 8 x 10 92 Planting large flowering /shady trees (ht.1.00 mt): Digging pit with size 0.9 m x 0.9 m x 0.9 m, removing and conveying unwanted stuff to a required distance as directed Filling the pit with approved excavated material upto to a height of 0.30 m and reamaining height of 0.60 m. with fresh garden soil and manure in 3:1 proporation mixing soil and manure throughly well leveling, as directed watering, previous night, planting two to three year old minimum 1.00 mtr height, helthy trees spaling as per specefications, Maintaing till well established by watering weeding,sirring of soil replacing of casualties etc complete, Delenia indica (Green Chafa) 21 x 21 93 Planting large flowering /shady trees (ht.2.00 mt): Digging pit with size 0.9 m x 0.9 m x 0.9 m, removing and conveying unwanted stuff to a required distance as directed Filling the pit with approved excavated material upto to a height of 0.30 m and reamaining height of 0.60 m. with fresh garden soil and manure in 3:1 proporation mixing soil and manure throughly well leveling, as directed watering, previous night, planting two to three year old minimum 2.00 mtr height, helthy trees spaling as per specefications, Maintaing till well established by watering ,weeding,sirring of soil replacing of casualties etc complete. Delonix Regia (Gulmohar) 14 x 16 94 Planting small and medium size ornamental /flowering plant Planting small and mediumsize ornamental or flowering plant. Digging pit with size 0.6 m x 0.6 m x 0.6 m, removing and conveying unwanted stuff soil and Farm Yard Manure up to a height of 0.60 m in 3:1 proportion, mixing soil and manure thoroughly well, leveling and watering previous night. Planting one or two year old healthy plant saplings as per specifications. Maintaining till well established by watering. Stirring of soil and manure, replacing of casualties etc. completePeepal 8 x 10 95 Rubber Plant 10 pot 96 Moringa (Shevga) 5 x 6 97 Sonchafa 8 x 10 98 Supply and installation of drip irrigation system all along the plantation /lawn area including all components and accessories etc complete 99 Bamboo Golden 13 x 13 - Excavation pit with size 0.30x 0.30x 0.30 removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 40 cm with fresh garden soil and manure in 3:1 propration.Mixing soil and manure thoroughly well levelling,watering on previous night .planting one or two year old healty plant as per specification Maintaning till well established by watering etc,complet , weeding pruning, sirring replacing casualties 100 Evergreen perennial typically grown- Excavation pit with size 0.25 x 0.25 x 0.25 removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 80 cm with fresh garden soil and manure in 3:1 propration.Mixing soil and manure thoroughly well levelling,watering on previous night .planting one or two year old healty plant as per specification Maintaning till well established by watering etc,complet , weeding pruning, sirring replacing casualtiesCanna (Kardal) 5 x 6 101 Snake Plant 10 pot 102 Arecaplam 13 x 13 103 Spider lilly 5 x 6 104 Weeping Fig 6 pot 105 Tulsi 5 x 6 106 Providing labour for plantation of different types of plants and trees, include excavating pit, watering the plant etc. Complete Mali 107 Mazdoor - Unskilled Heavy Male 108 Tree Cutter - Semi Skilled
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
38.
Public Administrative Department #10730816 Price Bid
Proposed Furniture Work At Kusumagraj Smarak In P.No.12 Nashik West Division.-1 COLLECTION counter Providing & fixing COLLECTION counter as per design of 0.9 m width & 1.2 in height with drawers above in 19mm thk. waterproof ply for frames, sliders & drawer facia,6mm thk. plywood for back & drawer bottoms with 12mm plywood for drawers, drawer side with bte lipping to all exposed edges of plywood including 1.mm thk. Laminate on top & 1mm thk laminate on sides & front of drawer facia & sliding shutters with necessary tower bolts castors handles, locks,etc.complete.with oil paint to all exposed surfaces of ply & lipping. Additional item Spec. no. as directed by Spec.No.: RA 22-23 A GROUND FLOOR 2 Providing and fixing vertical/roller blindes for window as approved by engineer in charge and architect GEM ID - 5116877-93262266948 Spec.No.: QUOTATION ATTACHED A GROUND FLOOR 3 GODREJ -ENTERPRIES TABLE 1200X600 X750 Enterprise 1200 Table without CPU Hanger size shall be 1200 Width mm x 600 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Spec.No.: AS PER QUTATION A GROUND FLOOR 4 GODREJ MAKE REVOVING CHAIR THRILL FULL BACK 1. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area .The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are *HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) *FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features · Up-Down adjustment- 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. 4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment 5. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 6. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). 7. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 113.5-123.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM. Spec.No.: AS PER QUTATION A GROUND FLOOR 5 GODREJ MAKE RELFEX CHAIRS WITH STACKEBALE TYPE 4 METAL LEG . SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholstery in product catalog). * SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D) * BACK SIZE : 53.0 cm. (W) x 39.0cm. (H) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. 3. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm andØ1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. Desk let support frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and welded to mainframe. Spec.No.: AS PER QUTATION A GROUND FLOOR 6 GODREJ MAKE GAIN 8 FT HIGHT GLASS DOOR BOOK RACK- 2325 H x 900 W x 450 D GAIN PRO STORAGE (BOOK RACK) 2325 H x 900 W x 450 D EACH UNIT SIZE Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form arow of storage.(Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered)Legs fitted with screw type leveler.Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 450W/600W and 0.8mm CRCA for 900W/1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS-513Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock -3 Way locking provision. Click action mechanism. #NAME? positions. Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).Material to be supplied by certified ISO 50001:2018, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 13485:2016, AIOTA member. Item should have at least one of the GRIHA/GREENGAURD/GREENPRO/ GREEN ASSURANCE Certifications adhering to standard environmental practices. Valid test certificate should be available for the item under consideration. Also, OEM must have dedicated toll free service number. Spec.No.: AS PER QUTAION A GROUND FLOOR 7 UPBEAT Discussion Table without wire manager-Size-900 Dia.750H MM Upbeat is a Complete office Furniture setup solution, designed to cater to the various settings in an office space.19mm thick both sided laminated MDF top Metal leg with epoxy powder coating Spec.No.: AS PER QUTATION A GROUND FLOOR 8 Excavation for foundation in earth, soil of all types, sand,gravel and soft murum, including removing the excavatedmaterial up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.5 m.) By Mechanical Means Spec.No.: Bd.A.1 PageNo. 259 I.NO 21.0 2 A GROUND FLOOR 9 Excavation for foundation in hard murum includingremoving the excavated material upto distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming,watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec.No.: Bd.A.2 PageNo.269 I NO 21.0 6 A GROUND FLOOR 10 Filling in plinth and floors with Contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Spec.No.: Bd.A.11 Page 253 21.37 A GROUND FLOOR 11 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Spec.No.: Bd.A. 12 PAGE 254 21.38 A GROUND FLOOR 12 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.E.4 Page No. 289 and B-7, Page No.38 I.NO.24.08 A GROUND FLOOR 13 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.6 Page No. 300 and B.7, Page No.38 I.NO.25.50 A GROUND FLOOR 14 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering,ormwork, cover blocks,laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.8 Page No. 302 and B.7, Page No.38 I.NO.25.70 A GROUND FLOOR 15 Providing and laying Cast in situ/Ready Mixcement concrete M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/Concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd.F.9 Page No. 303 and B.7, Page No.38 I.NO.26.05 A GROUND FLOOR 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec.No.: Bd. F. 12 Page No. 304 and B -7, Pg 38 I.NO.26.23 A GROUND FLOOR 17 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps,footings, foundations, slabs, beams columns, canopies,staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No.: Bd.F.17, Page No.306 I.NO.26 0.33 A GROUND FLOOR 18 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec.No.: As director by engineer in c harge and BDG- 2 and 5 I.NO.27.12 A GROUND FLOOR 19 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Spec.No.: As director by engineer inch arge and BDG- 2 and 5 I.NO.27.13 A GROUND FLOOR 20 Providing uncoursed rubble masonry of trap / granite /quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete. Spec.No.: Bd.H.1 Page No.329 I.NO.28.0 1 A GROUND FLOOR 21 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Spec.No.: As directed by Engineer in c harge. I.NO. 31.04 A GROUND FLOOR 22 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. Spec.No.: Bd. L.2 Page No. 368 I.NO.32 0.03 A GROUND FLOOR 23 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec.No.: Bd.L.7 Page No. 369 I.NO.32. 11 A GROUND FLOOR 24 Providing neeru finish to plastered surfaces in all positions including. Spec.No.: Bd. L.10, Page 370 I NO. 32. 15 A GROUND FLOOR 25 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. Spec.No.: Bd.M. 12 Page No.385 I.NO.33 0.42 A GROUND FLOOR 26 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Spec.No.: Bd.M. 12 Page No.385 I.NO.33 0.43 A GROUND FLOOR 27 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Spec.No.: As directed by Engineer in c harge. I.NO.35.25 A GROUND FLOOR 28 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Spec.No.: Bd.P.6 Page No. 414 I.NO.36. 12 A GROUND FLOOR 29 Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kgs/M2 and minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Spec.No.: As directed by Engineer in c harge. I.NO.38.45 A GROUND FLOOR 30 Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec.No.: As directed by Engineer inch arge. I.NO.39.02 A GROUND FLOOR 31 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. Spec.No.: BD-T-53 Page No. 509 As dire cted by Engineer in charge I.NO.39.29 A GROUND FLOOR 32 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . Spec.No.: As directed by Engineer in c harge. i. no.39.56 A GROUND FLOOR 33 Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. Spec.No.: As directed by Engineer in c harge. i. no.39.82 A GROUND FLOOR 34 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec.No.: Bd.V.8 Page No. 554 I.NO.41. 400 A GROUND FLOOR 35 Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. Spec.No.: Bd.V.9 Page No. 555 I. NO.41 0.48 A GROUND FLOOR 36 Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete. Spec.No.: Bd.V.14 Page No. 557 I.NO.41 0.52 A GROUND FLOOR 37 Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe. Spec.No.: Bd.V.23 Page No. 562 I. NO.4 1.57 A GROUND FLOOR 38 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Spec.No.: Bd.V.30 Page No. 565 I. NO.4 1.63 A GROUND FLOOR 39 Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and Spec.No.: BdV41 PAGE NO 573 I NO 42.07 0 A GROUND FLOOR 40 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete. Spec.No.: Bd.V.43,Page No.574 I.NO.42. A GROUND FLOOR 41 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Spec.No.: As directed by Engineer inch arge. I.NO.42.200 A GROUND FLOOR 42 Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. Spec.No.: As directed by Engineer in c harge. I.NO.42.320 A GROUND FLOOR 43 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.: BD.V 5 page 551 and as direc ted by Engineer in charge I.NO.42.550 A GROUND FLOOR 44 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.: BD.V 5 page 551 and as direc ted byEngineer in charge I.NO.42.580 A GROUND FLOOR 45 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec.No.: BD.V 5 page 551 and as direc ted by Engineer in charge I.NO.42.600 A GROUND FLOOR 46 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Spec.No.: BD.V 32 A page 551 and as di rected by Engineer in charge I.NO.42.670 0 A GROUND FLOOR 47 Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. Spec.No.: As directed by Engineer Inch arge I.NO.42.860 A GROUND FLOOR 48 CARTING UN WANTED MATERIAL FROM SITE UP TO 5 KM Spec.No.: AS DIRECTED (LEAD CHRGES FOR 5 KM) A GROUND FLOOR 49 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. Spec.No.: As directed by Engineer inch arge. I.NO.46.090 A GROUND FLOOR PART B (ELECTRICAL) 1 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories (PWD DSR 2023-24, 1-7-18) 2 Point wiring for ceiling fan in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories (PWD DSR 2023-24, 1-7- 19) 3 Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories (PWD DSR 2023-24, 1- 7-20) 4 Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories (PWD DSR 2022-23, 1-7-25) 5 Providing and fixing PVC trunking (PVC casing-ncapping) of size 25 mm with accessories on wall/ceiling (PWD DSR 2023-24, 1-2-7) 6 Providing and fixing HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling (PWD DSR 2023-24, 1-2-4) 7 Concealing of provided G.I. pipe/H.G. screwed conduit/PVC pipe in wall/floor/false ceiling (PWD DSR 2023-24, 1-1-13) 8 Providing and fixing mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking (PWD DSR 2023-24, 3-1) 9 Providing and fixing mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking (PWD DSR 2023-24, 3-2) 10 Providing and fixing mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking (PWD DSR 2023-24, 3-3) 11 Providing and fixing LED 22W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete (PWD Elec 2023-24, 2-1-18). 12 Providing and fixing LED square / circular Max. W down lighter / Panel Light having pressure diecast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens,(PWD DSR 2023-24, 2-1-5) 13 Providing and fixing LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, etc complete (PWD DSR 2023-24, 2-1-5) 14 Providing and fixing Ceiling fan 230 V A.C. 50 cycles 1400 mm etc complete (PWD DSR 2023- 24, 2-9-3) 15 Providing and fixing modular type electronic step regulator for fan etc complete. (PWD DSR 2023- 24, 2-10-9) 16 Providing and fixing fan clamp of 30 x 5 mm. M. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. (PWD DSR 2023-24, 2-10- 3) 17 Providing and fixing ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected (PWD DSR 2023-24, 2-10-6) 18 Providing and fixing bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator (PWD DSR 2023-24, 2-9- 19 Providing and fixing exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials (PWD DSR 2023-24, 2-9- 13) 20 Providing, fixing and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board (PWD DSR 2023-24, 5-3-3) 21 Providing, fixing and marking DPMCB 40A to 63A, B- series (for lighting) in provided distribution board (PWD DSR 2023-24, 5-3-9) 22 Providing, fixing single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs (PWD DSR 2023-24, 5-4-7) 23 Providing and fixing single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, (PWD DSR 2023-24, 5-4-9) 24 Providing, fixing testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete (PWD DSR 2023-24, 3-2-9) 25 Providing, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete(PWD DSR 2023-24, 3-2-13) 26 Providing and fixing PVC insulated PVC round sheathed 2.5 sq.mm 3 core flexible multi stranded copper Industrial cable for voltage grade up to kV (PWD DSR 2023-24, 1-3-15) 27 Providing and fixing copper pipe suitable for refrigeration system having size 12 mm complete. (PWD DSR 2023-24, 3-2-26) 28 Providing and fixing bracket for split type AC 29 Providing and fixing copper pipe suitable for refrigeration system having size 16 mm complete. (PWD DSR 2023-24, 3-2-27) 30 Providing and fixing Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 12 mm (PWD DSR 2023-24, 4-2-3) 31 Providing and fixing Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 16 mm (PWD DSR 2023-24, 4-2-4) 32 Providing and fixing rigid PVC pipe 20 mm dia.with PVC accessories for drain (PWD DSR 2023-24, 1-2-3) 33 Providing and fixing meter box with all accessories complete. 34 Providing, laying and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe (PWD DSR 2023-24, 7-1-28) 35 Providing, fixing and testing earthing with galvanised iron earth plate size 60 x 60 x 0.6 cm complete with all accessories of GI materials and recording the results (PWD DSR 2023-24, 9-1-1) 36 Providing and fixing GI earth wire of high purity of different sizes used for earthing. (PWD DSR 2023- 24, 9-2-5)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
42.
Road Transport and Highways #10561192 Price Bid
Consultancy Services For Feasibility Study And Detailed Engineering Including Preparation Of Detailed Project Report For Reconstruction Of Major Bridge Across Beas River At Dehra At Rd 59/375 Including Approaches And Realignment In The State Of Hp . , Remuneration For Local Staff ( Inclusive Of Per Diem Allowance ) , Team Leader Cum Senior Bridge Engineer , Bridge Structural Engineer , Highway Cum Pavement Engineer , Material-Cum-Geotechnical Engineer- Geologist , Senior Survey Engineer , Senior Geologist , Environmental Specialist , Quantity Surveyor/ Documentation Expert , Sub Professional Staff ( To Be Assessed By Consultant As Per Requirement Of Assignment And One Sub-Professional Be A Fresh Graduate ) , Position , Position , Position , Position , Position , Position , Position , Support Staff ( Inclusive Of Per Diem Allowance ) Note: To Be Assessed By Consultant As Per Requirement Of Assignment , Office Manager , Typist , Office Boy , Night Watchman , Transportation ( Fixed Costs ) , The Vehicles Hired By The Consultant Shall Include The Cost For Rental , Drivers , Operation , Maintenance , Repairs , Insurance , Etc . , Duty Travel To Site ( Fixed Costs ) , Trips , Office Rent ( Fixed Costs ) The Rent Cost Includes Maintenance , Cleaning , Repairs , Etc . , Office Rent , Office Supplies , Utilities And Communication ( Fixed Costs ) , Office Supplies Drafting , Supplies Computer , Running Costs , Domestic And International Communication , Office Furniture And Equipment ( Rental ) , Office Furniture And Equipment , Reports And Document Printing , Monthly Report ( 3 Copies Per Month ) , Inception Report & Qap , Environment And Social Impact Screening Report , Draft Feasibility Report , Final Feasibility Report , Strip Plan With L . A . Reports , Draft La And Clearances I Report , Final La And Clearances I Report , Draft Environmental Assessment Report& Rap , Final Environmental Assessment Report& Rap , Draft Detailed Design Report & Drawings Etc . , Draft Emp , Draft Bidding Document , Final Detailed Project Report With Bill Of Quantities , Cost Estimates , Updated Drawings Etc . , Final Emp , Final Bidding Documents , Draft 3 ( A ) , 3 ( A ) And 3 ( D ) & 3G Notification For Land Acquisition ( 3 Copies Each ) , La & Clearances Ii Report , Survey And Investigation A . Topographical Survey ( Fixed Rate ) , Topographic Survey Including Hire Charges For Equipment ( Gps , Total Station , Auto Level Etc . ) And Supply Of Survey Teams Comprising Of Project Survey Filed Staff Etc . Inclusive Of Cost Of Materials , Labourer . , Detailed Topographic Surveys Using Mobile/ Aerial Lidar Or Better Technology , Investigation ( Fixed Cost ) ( Lumpsum ) , Road And Bridge Inventory , Fwd Test And Pavement Evaluation , Roughness Survey , Axle Load Survey , Material Survey And Investigation , Sub Grade Investuigation , Traffic Survey , Socio Economic And Census Survey/Studies , Land Acquisition Studies , Any Other Investigations/Surveys , Sub-Soil Investigation ( Boring ) ( Rate/M ) , A ) In Soil Other Than Hard Rock , B ) In Hard Rock , Net Work Survey And Gpr , Net Work Survey Of The Existing Highways As A Repository For Civil Work As Per Directions From Authority . , Gpr Survey For Detection Of Under Ground Utilities , Fixing Boundary Pillars , Procuring And Fixing Boundary Pillars And Its Installation , Complete In All Respect As Per Irc:25 , 1967: Wherever The Proposed Alignment Follows The Existing Alignment , The Boundary Pillars Shall Be Fixed At An Interval Of 200M On Either Side Of Proposed Right Of Way . Wherever There Is A Proposal Of Realignment Of The Existing Highway And/Or Construction Of New Bypasses , Consultant Shall Fix Boundary Pillars Along The Proposed Alignment On The Extreme Boundary On Either Side Of The Project Highway At 50 M Interval , Land Acquisition Team Including Support Staff And Logistics/Transportation , Ex-Land Revenue Inspector/Officer Or Equivalent , Ex-Kanoogo/Girdwar Or Equivalent , Ex-Patwari Or Equivalent , Typist ( 2 Nos . ) , Peon , Logistics For Land Acquisition Team , Computer Including NecessaryPeripherals ( 2 Nos . ) , Printers ( 2 Nos . ) , Vehicles ( Bolero Or Equivalent ) With Monthly Running Limit Of 4000 Km , Estimate Of Expatriateconsultants ( Name And Position To Be Filled In Below Columns By The Bidder ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Moblization And Demoblization- International Airfares ( Fixed Costs ) ( To Be Filled By Bidders In Below Columns ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Moblization And Demoblization-Inland Travel In Home Country ( Fixed Costs ) , Other Miscellaneous Expenses ( Like Da , Internal Travel Expenses Other Incidentals ) ( Fixed Cost )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
Himachal Pradesh View Result →
43.
Road Transport and Highways #10540425 Price Bid
Consultancy Services For Balance Works Of Land Acquisition Plan , Forest Clearance Proposals And Other Pre Construction Activities In Respect Of Detailed Project Report ( Dpr ) For Sainj-Luhari-Jalori-Banjar-Aut Road Excluding Jalori Pass Tunnel , Of Nh- , Remuneration For Local Staff ( Inclusive Of Per Diem Allowance ) , Team Leader Cum Senior Highway Engineer , Senior Bridge Engineer , Highway Cum Pavement Engineer , Material Cum Geotechnical Engineer Cum Geologist , Senior Survey Engineer , Traffic And Safety Expert , Environment Specialist , Quantity Surveyor/Documentation Expert , Land Acquisition Expert , Utility Expert , Sub Professional Staff ( To Be Assessed By Consultant As Per Requirement Of Assignment And One Sub-Professional Be A Fresh Graduate ) , Position , Position , Position , Position , Position , Position , Position , Support Staff ( Inclusive Of Per Diem Allowance ) Note: To Be Assessed By Consultant As Per Requirement Of Assignment , Office Manager , Typist , Office Boy , Night Watchman , Transportation ( Fixed Costs ) , The Vehicles Hired By The Consultant Shall Include The Cost For Rental , Drivers , Operation , Maintenance , Repairs , Insurance , Etc . , Duty Travel To Site ( Fixed Costs ) , Trips , Office Rent ( Fixed Costs ) The Rent Cost Includes Maintenance , Cleaning , Repairs , Etc . , Office Rent , Office Supplies , Utilities And Communication ( Fixed Costs ) , Office Supplies , Drafting Supplies , Computer Running Costs , Domestic And International Communication , Office Furniture And Equipment ( Rental ) , Office Furniture And Equipment , Reports And Document Printing , Monthly Report ( 3 Copies Per Month ) , Inception Report & Qap , Environment And Social Impact Screening Report , Draft Emp , Final Emp , Strip Plan With L . A . Reports , Draft La And Clearances I Report , Final La And Clearances I Report , Draft Environmental Assessment Report& Rap , Final Environmental Assessment Report& Rap , Draft Detailed Design Report & Drawings Etc . , Draft Bidding Documents , Updated Final Detailed Project Report With Bill Of Quantities , Cost Estimates , Updated Drawings Etc . , Final Bidding Documents , Draft 3 ( A ) , 3 ( A ) And 3 ( D ) & 3G Notification For Land Acquisition ( 3 Copies Each ) , La & Clearances Ii Report , Survey And Investigation A . Topographical Survey ( Fixed Rate ) , Topographic Survey Including Hire Charges For Equipment ( Gps , Total Station , Auto Level Etc . ) And Supply Of Survey Teams Comprising Of Project Survey Filed Staff Etc . Inclusive Of Cost Of Materials , Labourer . , Detailed Topographic Surveys Using Mobile/ Aerial Lidar Or Better Technology , Investigation ( Fixed Cost ) ( Lumpsum ) , Traffic Survey , Land Acquisition Studies , Any Other Investigations/Surveys , Sub-Soil Investigation ( Boring ) ( Rate/M ) , A ) In Soil Other Than Hard Rock , B ) In Hard Rock , Fixing Boundary Pillars , Procuring And Fixing Boundary Pillars And Its Installation , Complete In All Respect As Per Irc:25 , 1967: Wherever The Proposed Alignment Follows The Existing Alignment , The Boundary Pillars Shall Be Fixed At An Interval Of 200M On Either Side Of Proposed Right Of Way . Wherever There Is A Proposal Of Realignment Of The Existing Highway And/Or Construction Of New Bypasses , Consultant Shall Fix Boundary Pillars Along The Proposed Alignment On The Extreme Boundary On Either Side Of The Project Highway At 50 M Interval , Land Acquisition Team Including Support Staff And Logistics/Transportation , Ex-Land Revenue Inspector/Officer Or Equivalent , Ex-Kanoogo/Girdwar Or Equivalent , Ex-Patwari Or Equivalent , Typist ( 2 Nos . ) , Peon , Logistics For Land Acquisition Team , Computer Including NecessaryPeripherals ( 2 Nos . ) , Printers ( 2 Nos . ) , Vehicles ( Bolero Or Equivalent ) With Monthly Running Limit Of 4000 Km , Estimate Of Expatriateconsultants ( Name And Position To Be Filled In Below Columns By The Bidder ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Moblization And Demoblization- International Airfares ( Fixed Costs ) ( To Be Filled By Bidders In Below Columns ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Position ( Value= 0 ) , Moblization And Demoblization-Inland Travel In Home Country ( Fixed Costs ) , Other Miscellaneous Expenses ( Like Da , Internal Travel Expenses Other Incidentals ) ( Fixed Cost )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Himachal Pradesh View Result →
45.
Housing Urban and Rular Development #10528764 Price Bid
Request For Proposal For Independent Engineer Services Operation And Maintenance Of Barmer-Sindari-Jalore Of Sh-16 And Ahore-Bali-Mundara ( Sanderao To Mundara ) Section Of Sh-16 ( Total Length 178 Km ) Under Rship Tranche-I, Package-02 On Annuity Mode Under Design, Build, Finance, Operate And Transfer ( “Dbfot” ) Basis In The State Of Rajasthan , I . Remuneration For Local Professional Staff , Key Personnel ( Professional Staff ) , Team Leader Cum Senior Highway Maintenance Engineer , Resident Cum Highway Engineer , Sub-Professional , Financial Expert , Road Safety Expert , Legal Expert , Assistant Highway Engineer , Survey Engineer , Environmental Engineer , Assistant Bridge Engineer , Quantity Surveyor , Htms / Toll Expert , Support Staff , Office Manager , Office Boy ( 2 Nos . ) , Iii . Transportation ( Fixed Rate On Rental Basis ) For 3000 Km Approx . , Tata Indigo / Maruti Dezire Or Equivalent ( Not More Than 2 Year Old ) , Duty Travel To Site ( Fixed Costs ) : Professional And Sub-Professional Staff , Site To Pwd Hq For Key Professionals / Sub Professional , Office Rent ( Fixed Costs ) Minimum 200 Sqm Area Of Office Shall Be Rented At Jalore Town , Jalore , Office Supplies , Utilities And Communication ( Fixed Costs ) , Office Supplies , Drafting Supplies , Computer Running Costs , Domestic And International Communication Etc . , Office Furniture And Equipment ( Rental ) , Reports And Document Printing , Monthly Reports ( In 3 Copies ) , Quarterly Reports ( In 3 Copies ) , Other Reports ( In 3 Copies ) , Contingencies ( Fixed Rs . 10 , 00 , 000 / - ) The Provisions Of Contingency Shall Be Operated With The Specific Approval From The Competent Authority In Pwd .
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
46.
Educational and Research Institute #10502902 Price Bid
Supply Of Library Books , Library Books , Introduction To Database Management System P.K. Yadav , Database Management Systemp.K. Yadav , Concepts Of Database System P.K. Yadav , Software Project Managementrajiv Chopra , Software Testing Rajiv Chopra , Software Testing And Quality Assurance Rajiv Chopra , An Integrated Approach To Software Engineering Rajiv Chopra , Internet Of Things ( Iot ) Rajiv Chopra , Object Oriented Software Engineeringrajiv Chopra , Introduction To Microprocessor Rajiv Chopra , Requrements And Estimation Techniques Rajiv Chopra , Fundamentals Of Computing Rajiv Chopra & Rishbh Anand , An Introduction To Automata Theory & Formal Languages Adesh K. Pandey , Introd. To Automata Theory & Formal Lang.Adesh K. Pandey , Fundamentals Of Compiler Designadesh K. Pandey , Concepts Of Complier Designadesh K. Pandey , Concepts Of E-Commerceadesh K. Pandey , Internet Fundamentalsadesh K. Pandey , Network Security & Administrationadesh K. Pandey , Internet & Web Designingadesh K. Pandey &Er.Neha Dutta , Introduction To E-Commerce & Erpadesh K. Pandey , A Textbook Of Compiler Designadesh K. Pandey , Elements Of Compiler Designadesh K. Pandey , Theory Of Automata And Computationadesh K. Pandey , Theory Of Computationadesh K. Pandey , Fundamentals Of Electronics Commerce Adesh K. Pandey , Internet Programming Using Javapandey & Pandey , Fundamentals Of Computer Programming In Cs.K.Jha , System Analysis & Designs.K.Jha , Programming In Cs.K.Jha , Pc Organization S.K.Chauhan , Pc Upgrading Maintenance & Trouble Shooting Guide , Neural Network & Fuzzy Logicvinoth Kumar And R.Saravana Kr. , Soft Computingk.Vinoth Kumar , Fundamentals Of Soft Computingk.Vinoth Kumar , Computer Concepts & Programming In Camit Kumar Mishra , Basic Computer Engineeringamit Kumar Mishra , Introduction To Computer Systemamit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , A Textbook Of Computer Architecture Amit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , Computer System And Programming In C Amit Kumar Mishra , Computer Architecture & Organizationamit Kumar Mishra , Information Security And Cyber Laws Amit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , Computer Architecture Amit Kumar Mishra , Computer Programming Amit Kumar Mishra , Fundamentals Of Computer And Programming Amit Kumar Mishra , Software Engineeringbali And Bali , Fundamentals Of Software Engineeringbali And Bali , Thinking In C++ Rajesh Kocher & Sunil K. Pandey , Learn Autocadrajesh Kocher & Sunil K. Pandey , Fundamentals Of Computer Programming And Itsunil K. Pandey& V.K. Jain , Object Oriented Programing With C ++ Sunil K. Pandey& Rajesh Kochher , Programming Language Nitin Upadhyay , The Design & Analysis Of Algorithmsnitin Upadhyay , Data Structures And Algorithms Using C Nitin Upadhyay , Question Bank In Computer Sciencenitin Upadhyay, Pankaj Sharma , Computer Networks Dr. Sanjay Sharma , Elements Of Computer Networks Dr. Sanjay Sharma , Computer Networks Dr. Sanjay Sharma , A Course In Computer Networksdr. Sanjay Sharma , Introduction To Computer Networks Dr. Sanjay Sharma , Computer Networks-I Dr. Sanjay Sharma , Advanced Computer Networksdr. Sanjay Sharma , Computer Networks-Ii Dr. Sanjay Sharma , Principles Of Computer Networks Dr. Sanjay Sharma , Digital Logic Design Dr. Sanjay Sharma , A Textbook Of Computer Network Dr. Sanjay Sharma , Fundamentals Of Computer Network Dr. Sanjay Sharma , Introduction To Web Technologypankaj Sharma , Fundamentals Of Web Technologypankaj Sharma , Working With Artificial Intelligencepankaj Sharma , Web Engineering Pankaj Sharma , Manet And High Speed Networkspankaj Sharma , Computer Organization Pankaj Sharma , Computer Architecture & Organizationpankaj Sharma , System Programmingpankaj Sharma , Expert System Pankaj Sharma , Information Security & Cyber Lawspankaj Sharma , System Programming & System Admin. Pankaj Sharma , Rapid Application Devlop.Using Visual Basic & Visual C++Pankaj Sharma , Parallel Algorithms Pankaj Sharma , Pattern Recognitionpankaj Sharma , Web Developmentpankaj Sharma , Information Storage & Managementpankaj Sharma , Web Engineering Pankaj Sharma , System Administration Pankaj Sharma , Information Security Pankaj Sharma , Cloud Computing Pankaj Sharma , Introduction To Web Engineering Pankaj Sharma , Web Administration Pankaj Sharma , Dot Net Framework With C# Programming Dr. Lalit Arora , Object Oriented System With C++ Dr. Lalit Arora , Object Oriented System With Javadr. Lalit Arora , Internet & Javadr. Lalit Arora , C# Using .Net Frameworkdr. Lalit Arora , Java Programming & Web Site Designdr. Lalit Arora , Object Oriented Techniques Java Dr. Lalit Arora , Object Oriented Programing Using C ++Dr. Lalit Arora , It Skills And Technology Dr. Lalit Arora , Concept Of Programming And Oopsdr. Lalit Arora, Dr. Raj Kumar & Dr. Anjali , Computer Organization & Architecture Dr. Lalit Arora, Dr. Raj Kumar & Dr. Anjali , Computer Graphicsudit Agarwal , Introduction To Computer Graphicsudit Agarwal , Data Structures Using C Udit Agarwal , Data Structures Udit Agarwal , Software Engineeringudit Agarwal , Distributed Systems Udit Agarwal , Distributed Computing Udit Agarwal , Data Mining And Data Warehousingudit Agarwal , Computer Graphics And Multimedia Udit Agarwal , Programming For Problem Solving Udit Agarwal , Operating Systemvijay Shukla , Multimedia System, Technology & Communication Sujata Pandey , Data Mining & Data Ware Housing , Network Programmingkadambri Agarwal , Programming Languages Kadambri Agarwal , Network Technologykadambri Agarwal , System Network Administration Kadambri Agarwal , Graph Theoryk.Patrai , Discrete Structures & Graph Theoryk.Patrai , Mobile Computingvishnu Sharma , Advances Mobile Computingvishnu Sharma , A Course In Electrical Technologyj.B Gupta , A Course In Electrical Technology-Ij.B Gupta , A Course In Electrical Technology-Iij.B Gupta , A Course In Electrical Technology-Iiij.B Gupta , Generation & Economic Considerationsj.B Gupta , A Course In Electrical Powerj.B Gupta , A Course In Power Systems J.B Gupta , Theory & Performance Of Electrical Machinej.B Gupta , Utilization Of Electric Power & Electric Tractionj.B Gupta , Utilization Of Electrical Energy And Traction J.B.Gupta, R. Manglik, R. Manglik , Switchgear & Protectionj.B Gupta , A Course In Electrical Installation Estimating & Costingj.B Gupta , Fundamentals Of Electrical & Electronics Engineering J.B Gupta , Transmission & Distribution Of Electrical Powerj.B Gupta , Basic Electrical Engineeringj.B Gupta , Basic Electricity J.B Gupta , Electrical Measurements & Measuring Instrumentsj.B Gupta , Electrical Machines-Ij.B Gupta , Electrical Machine - Iij.B Gupta , An Integrated Course In Electrical Engineering J.B Gupta , Explanation / Solutions To An Integrated Course In Electrical Engineering J.B Gupta , An Integrated Course In Electrical Engineering Volume I J.B Gupta , An Integrated Course In Electrical Engineering Volume Ii J.B Gupta , Question Bank In Electrical Engineeringj.B Gupta , Question Bank In Electrical Engineering Volume I J.B Gupta , Question Bank In Electrical Engineering Volume Ii J.B Gupta , A Text Book Of Electrical Engineeringj.B Gupta , Electrical Science J.B Gupta , Electromechanical Energy Conversionj.B Gupta , Electromechanical Energy Conversion- Ij.B Gupta , Electromechanical Energy Conversion- Iij.B Gupta , Electrical Machines ( Ac, Dc Machine ) J.B Gupta , A Text Book Of Electrical Technologyj.B Gupta , Electrical Machines & Automatic Controlj.B Gupta & Hasan , Elements Of Power Systems J.B Gupta , Power System Analysis J.B Gupta , Fundamentals Of Switchgear & Protectionj.B Gupta , Electrical Engineering Materials & Semiconductor Devices J.B Gupta , Basic Electrical & Electronics Engineering J.B Gupta , Electrical Machines-Ij.B Gupta , Electrical Machines-Ii J.B Gupta , Electrical Technologyj.B Gupta , Basic Electrical Engineeringj.B Gupta , Fundamentals Of Electrical Engineering J.B Gupta , Elements Of Electrical Engineering J.B Gupta , Basic Electrical Engineering J.B Gupta , A Textbook Of Electrical Science J.B Gupta , A Textbook Of Electrical Engineering Rajeev Manglik , Power System & Protectionn.K.Datta , Theory & Performance Of Electrical Machine Design Dr. N.K.Datta , Principles Of Electrical Machine Designr.K. Agarwal , Electrical Engineering Materialsrakesh Dogra , Electrical Engineering Drawing-Isurjit Singh , Electrical Engineering Drawing-Iisurjit Singh , Electrical Measurements & Measuring Instrumentsm.L.Anand , Basic Electrical Engineeringtarlok Singh , Installation Commissioning & Maintain. Of Elect. Equip.Tarlok Singh , Electrical Measurement & Measuring Instrumentstarlok Singh , Elements Of Electrical & Electronics Engineering Tarlok Singh , Utilization Of Electric Energytarlok Singh , Electrical Machine-Itarlok Singh , Electrical Machine-Iitarlok Singh , Electrical Power-Iitarlok Singh , Fundamentals Of Electrical Engineering Tarlok Singh , Electrical Science Tarlok Singh , Transmission & Distributiontarlok Singh , Modern Electric Traction Tarlok Singh , Energy Managementdr. Sanjeev Singh, Umesh Rathore , Basic Instrumentation System & Programmable Logic Controllerumesh Rathore , Industrial Instrumentationumesh Rathore , Programmable Logic Controller And Microcontrollers Umesh Rathore , A Textbook Of Electrical Workshop Practices Umesh Rathore, Naresh Kumar Sharma , A Textbook Of Energy Science & Engineering Umesh Rathore , Fundamentals Of Managementdr. R.C.Bhatia , Sub-Station Engineering Design, Concepts & Computer Applications Er. R.S.Dahiya , An Introduction To Electric Traction Sachidananda Mallik & Rupali G. Nazar , Fundamentals Of Managementrenu Rana , Special Electrical Machines Simmi P Burman , High Voltage Engineering Simmi P Burman & Nikita Gupta , Electrical Engineering Laboratory Practice P. Tiwari & S. Sairola , Ehv-Ac, Hvdc Transmission And Distribution Engineering Sanjay Kumar Sharma , Basic System Analysissyed Hasan Saeed & Faizan Arif Khan , Power Quality Simmi P. Burman & Bipin Singh , Scada And Energy Management System Er. Tanuj Kumar Bisht , Computer Aided Design Of Electrical Machines V.K. Maurya, Ritu Raj Jallan, Shasya Shukla , A Textbook Of Power System Operation And Control K. Nisha , Electromagnetic Field Theory Syed Hasan Saeed & Faizan Arif Khan , Installation Maintenance And Repair Of Electrical Machines And Equipments Madhvi Gupta , Electrical Engnineering Design, Drawing & Estimation Madhvi Gupta, Ankit Agarwal , Control Systems S.P. Meher , Fundamentals Of Smart Grid Technology Bharat Modi, Anu Prakash & Yogesh Kumar , Electric Vehicle Dr. Nitesh Tiwari , Ssc-Je-Question Bank In Electrical Engineering J.B.Gupta , Ace Academy Gate 2024 Ace Publication , Gate / Ese / Psus Electrical Handbook Ace Publication , Ace Academy Ese Vol 1And Vol 2 Ace Publication , Yct Electrical Engineering Je-Vol And Vol 2 Yct Publications , Yct Electrical Engineering Ae-Vol And Vol 2 Yct Publications , Basic Electrical Engineering Vol 1S Chand Publication, B L Theraja , Ac & Dc Machine Vol 2 S Chand Publication, B L Theraja , Transmission And Distribution Utilisation S Chand Publication, B L Theraja , Electronics Devices And Circuits S Chand Publication, B L Theraja , Power Electronics Khanna Publications, Dr. Ps Bhimbra , Fundamentals Of Electrical Circuits Mc Graw Hill, Charles K.Alexander , Objective Electrical Technology V.K.Mehta, Rohit Mehta , Principles Of Power System V.K.Mehta, Rohit Mehta , Principles Of Electrical Machines V.K.Mehta, Rohit Mehta , Control Of Machines New Age International , Sk Bhattacharya , Linear Integrated Circuits New Age International , Sk Bhattacharya , Programmable Logic Controllerpearson, John.R.Hackworth , Principles Of Electromagnetics Oxford, Sadiku & Kulkarni , A Course In Electrical & Electronics Measurements And Instrumentation Dhanpat Raj & Co , A K Sawhney , Fundamentals Of Digital Circuits Phi, A.Anand Kumar , Power Electronics Devices Circuits And Applicationpearson, Muhammad H. Rashid , Electrical Power System C.L.Wadhwa, New Age International , Modern Power System Analysis Mc Graw Hill, D.P.Kothari , Electrical Machinery Khanna Publications, Dr. Ps Bhimbra , Generalized Theory Of Electrical Machines Khanna Publications, Dr. Ps Bhimbra , Electronics Devices And Circuits S.Salivahanan, Mc Graw Hill , Micro Controller Principles And Applications Ajit Pal, Eastern Economy Edition , Power Plant Engineering Mc Graw Hill, P K Nag , Power System Engineering Lp, R.K.Rajput , Non Conventional Energy G D Rai, Khanna Publication , Basic Electrical And Electronics Engineering Mc Graw Hill, D.P.Kothari , Repair And Maintenance Bpb Publications, Shashi Bhushan Sinha , Electrical Applications Haynes , Electronic Devices And Circuitsj.B.Gupta , Basic Electrical And Electronics Engineeringj.B.Gupta , Linear Integrated Circuitsj.B.Gupta , Fundamentals Of Analog Electronicsj.B.Gupta , Basic Electronics J.B.Gupta , Electrical & Electronics Engineering J.B.Gupta , A Textbook Of Basic Electronics J.B.Gupta, Rajeev Manglik, Rohit Manglik , Analog Devices And Circuits J.B.Gupta , Fundamentals Of Electronics Devices & Circuits J.B.Gupta , Electronic Devices & Circuits Dr. Sanjay Sharma , Analog & Digital Electronicsdr. Sanjay Sharma , Signal & Systemsdr. Sanjay Sharma , Digital Signal Processing Dr. Sanjay Sharma , Electronics Circuits Dr. Sanjay Sharma , Digital Electronics Dr. Sanjay Sharma , Digital Communications Dr. Sanjay Sharma , Fundamentals Of Electronic Devicesdr. Sanjay Sharma , Digital Communication Dr. Sanjay Sharma , Digital Signal Processing Dr. Sanjay Sharma , Principle Of Digital Signal Processingdr. Sanjay Sharma , Analog & Digital Communication Dr. Sanjay Sharma , Signal & System Dr. Sanjay Sharma , Fundamentals Of Communication Engineering Dr. Sanjay Sharma , Communication Engineeringdr. Sanjay Sharma , Digital Electronics And Logic Design Dr. Sanjay Sharma , Digital Circuits & Systems Dr. Sanjay Sharma , Wireless Communication Systems Dr. Sanjay Sharma , Electronic Circuits Dr. Sanjay Sharma , Digital Electronics & Design Aspects Dr. Sanjay Sharma , Electronic Devices Dr. Sanjay Sharma , Signals & Systems Dr. Sanjay Sharma , Digital Design Dr. Sanjay Sharma , Analog And Digital Electronics Dr. Sanjay Sharma , A Textbook Of Electronics Engineering Dr. Sanjay Sharma , Fundamentals Of Digital Electronics Dr. Sanjay Sharma , Fundamentals Of Digital Image Processing Dr. Sanjay Sharma , Digital Image Processing Dr. Sanjay Sharma , Wireless Communication System Dr. Sanjay Sharma , Mobile Computing Dr. Sanjay Sharma , Switching Theory And Logic Design Dr. Sanjay Sharma , Essentials Of Computer Networks Dr. Sanjay Sharma , Data And Computer Communications Dr. Sanjay Sharma , Fundamentals Of Switching Theory & Logic Design Dr. Sanjay Sharma , Essentials Of Analog Communication Dr. Sanjay Sharma , Data Communication And Computer Networks Dr. Sanjay Sharma , A Textbook Of Data Communication And Networks Dr. Sanjay Sharma , Essentials Of Wireless Communication Dr. Sanjay Sharma , Fundamentals Of Electronics Engineering Dr. Sanjay Sharma , Wireless Communicationsdr. Sanjay Sharma , Electronic Devices & Circuits Dr. Sanjay Sharma , Fundamentals Of Digital Signal Processing Dr. Sanjay Sharma , Fundamentals Of Analog Communication Dr. Sanjay Sharma , A Textbook Of Signals & Systems Dr. Sanjay Sharma , Solid State Devices & Circuits Dr. Sanjay Sharma , Electronics-I Dr. Sanjay Sharma , Signal Processing And Linear Systems Dr. Sanjay Sharma , Emerging Domain In Electronics Engineering Dr. Sanjay Sharma , Circuits & Systemsk.M.Soni , Circuit Analysis And Synthesis K.M.Soni , Advanced Control Systemsk.M.Soni , Network Analysis & Systhesisk.M.Soni , Network Analysisk.M.Soni , Network Theory K.M.Soni , Fundamentals Of Network Analysis & Synthesis K.M.Soni , Basic System Analysisk.M.Soni , Signals And Systems K.M.Soni , Digital Electronicsb.R.Gupta And V.Singhal , Consumer Electronicsb.R.Gupta , Power Electronicsb.R.Gupta And V.Singhal , Introduction To Electric Drivesb.R.Gupta And V.Singhal , Question Bank Electronics & Communicationengineeringb.R.Gupta And V.Singhal , Fundamentals Of Electric Drives And Control B.R.Gupta And V.Singhal , Industrial Electronics & Instrumentationsunil Kumar , Optical Fiber Communicationsapna Katiyar , Satellite Communicationsapna Katiyar , Advanced Communication Systemsapna Katiyar , Electronic Switchingsapna Katiyar , Introduction To Optical Communicationsapna Katiyar , Telecommunication Networkssapna Katiyar , Fundamentals Of Optical Fiber Communicationsapna Katiyar , A Textbook Of Optical Fiber Communication Systems Sapna Katiyar , Introduction To Satellite Communcation Sapna Katiyar , Tv And Satellite Communications Sapna Katiyar , Vlsi ( Technology, Design & Basics Of Microelectronics ) Sapna Katiyar , 8051 Microcontroller & Embedded Systemsampath K. Venkatesh , Digital Circuit System Using Vhdlneelu Chaudhary And Shipra Gupta , Digital Logic & Design Pratima Manhas And Shaveta Thakral , Digital Electronicspratima Manhas And Shaveta Thakral , Vlsi Design Pratima Manhas & Shaveta Thakral , Introduction To Microprocessors & Interfacingaashutosh Gupta , Electromagnetic Fields & Wavesr.Gowri , Wireless Communicationaman Kundra And Amrita Sandhu , Trouble Shooting & Maintenance Of Elect. Equipmentsk.Sudeep Singh , Fundamentals Of Television & Radar Engineering K.K Sharma , Fundamentals Of Radar, Sonar & Navigation Engineering K.K Sharma , Fundamentals Of Data Communicationk.K Sharma , Digital & Analog Communicationk.K Sharma , Microwave & Radar Engineeringk.K Sharma , Antenna & Wave Propagation A.K.Gautam , Principle Of Communication Engineering A.K.Gautam , Communication System-Ia.K.Gautam , Microwave Engineering A.K.Gautam , Control System Hasan Saeed , Digital & Analog Communicationbrijesh Verma , Mobile Communicationbrijesh Verma , Telemetry & Data Transmissionr.N.Baral , Electronics Devices & Circuits-I M.L.Anand , Bio-Medical Signal Processing Rakesh Kumar , Medical Electronics O.N. Pandey & Rakesh Kr. , Instrumentation And Process Control O.N. Pandey , Electromagnetic Field Theory Parul Dawar , Digital Circuit And Systems Shipra Gupta , Vlsi Designc.P Verma , Introduction To Vlsi Circuits & Systems Deepak Garg , Vlsi Technology Deepak Garg , Fundamentals Of Vlsi Design Deepak Garg , Basics Of Vlsi Design With Vhdl Deepak Garg , Microprocessor & Interfacingn. Marriwala , Embedded System Design N. Marriwala & Ritu Khullar , Fundamentals Of Radar & Navigation Sachin Gupta , Optical Communication Sachin Gupta , Microwave And Radar Engineeringravi Garg & Ankaj Gupta , Antenna And Wave Propagation Prashant Pandey , Digital Electronics Preeti Sehrawat , Electronic Circuits M. Elangovan , Electromagnetics And Antennas H. Singh , Optoelectronics & Optical Communication Satyajit Das , Control Systems Engineering Dr. S. Panda, S. Padhy & S.R. Das , Microcontroller And Embedded Systems Ankaj Gupta , Microprocessors And Microcontrollers Ankaj Gupta , Fundamentals Of Microprocessors And Embedded Systems Ankaj Gupta , Microprocessors Shweta Goyal & Swati Gargust , Industrial Electronics And Control Of Drives Shweta Goyal & Swati Gargust , Engineering Economics And Industrial Management Dr. R.K. Singal & Er. Rishi Singal , Microwave & Radar Engineering Er. Rajesh Dhiman , Embedded Systems Anurag Arora , Wireless Sensor Networks Sunil Gupta & Dr. Harsh K. Verma , Probability, Random Variables And Stochastic Methods Himanshu Chaurasiya & Dr. K.M. Soni , Relational Database Management System Pooja Sharma & D.S. Sehrawat , Semiconductor Devices And Circuits C.S. Murlidharan Sharma , Industrial Power Electronics Partha K. Ganguly , An Insight To Matlab & Simulink Dr. Shailender Gupta & Bharat Bhushan , Fundamentals Of Optical Communication & Networks Shila Ghosh, Somali Sikder , Digital Image Processing Ketki Kshirsagar, Rajeshree Shinde , Embedded System & Microcontroller Manish Verma & K.B. Singh , Electronic Design Automation & Logic Synthesissarita Chauhan , Artificial Intelligence For Engineers Malvika Gupta, Medha Malik , Principles Of Electronics Dr. S.K. Bhattacharya , Machine Learning Dr. Himanshu Sharma , Strength Of Materials R.S.Khurmi S.Chand & Company Ltd, New Delhi , Strength Of Materials S.Ramamirtham Dhanpat Rai , Engineering Mechanics R K Bansal Laxmi Publications Pvt.Ltd. , Building Materials P.C.Varghese Prentice-Hall Of India ( P ) Ltd., I Edition , Building Construction Dr. B.C. Punmia Laxmi Publications ( P ) Ltd New Delhi. , Building Construction S.C.Rangwala Charotar Publishing House, Vii Edition , Surveying Volume I Punmia.B.C. Ashok K.Jain & Arun K. Jain Lami Publications Private Limited, 16Th Edition , Surveying Volume Ii & Iii Punmia.B.C, Ashok Jain & Arun K. Jain Lami, Publications Private Limited., 15 Th Edition, , Fundamentals Of Surveying S. K. Roy Phi Learning Private Limited , Building Planning And Drawing Dr.N.Kumaraswamy Charotor Publishing House , Building Planning And Construction G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , A Guide To Civil Engineering Drawing V.R.Thothathri , Theory Of Structures S. Ramamrutham Dhanpat Rai Publications, New Delhi , Theory Of Structures B.C. Punmia, Ashok Jain & Arun Jain Laxmi Publications , Analysis Of Structures V.N. Vazirani & M.M. Ratwani , Fluid Mechanics R.K. Bansal Lakshmi Publications , Hydraulics, Fluid Mechanics And Hydraulics Machines S. Ramamirtham Dhanpat Rai & Sons, New Delhi , Hydraulics, Fluid Mechanics And Hydraulics Machines K.R. Arora Standard Publishers & Distributors, New Delhi , Highway Engineering S.K.Khanna And C.E.G Justo Nem Chand And Bros, Roorkee. , Highway Engineering Rangwala Charotor Publishing House Pvt. Ltd , A Text Book Of Transportation Engineering S P Chandola S Chand & Company Ltd , Bridge Engineering Rangawala Charotor Publishing House , Reinforced Concrete Design N Krishnaraju New Age International Publications, 2012 , Is 456-2000 , Steel Structures Hand Book Sp16 , Limit State Design Of Reinforced Concrete B C Punmia Laxmi Publications, 2007 , Design Of R C C And Structural Elements ( Rcc Vol I ) S S Bhavikatti, New Age International Publications, 2011 , Environmental Engineering B C Punmia Lami Publications, 2010 , Waste Water Engineering B C Punmia , Laxmi Publications, 2010 , Environmental Engineering A.Kamala, D.L.Kanthraotata Mcgraw Hill Publishing Company Ltd., New Delhi , Concrete Technologym.S. Shetty S.Chand & Company Pvt. Ltd. New Delhi. , Soil Mechanics And Foundation Engineering B C Punmia Laxmi Publications ( P ) Ltd., 2005 , Civil Engineering Drawings.C. Rangwala Charotor Publishing House , Construction Management Sanga Reddy. S Kumaran Publications, Coimbatore , Steel Structures Dr.Subramaniam , Town Planning S.C. Rangwala , Principles And Practice Of Town And Country Planninglewis B. Keeble Estates Gazette, University Of Michigan, 2010 , Estimating & Costing L.N.Dutta Dhanpat Rai & Sons , Estimating & Costingrangawala , Charotor Publishing , Quantity Surveying & Valuation N.A.Shaw Khanna Publishers; , Civil Engineering Competitionsbooks R.Agor Khanna Publishers; , Civil Engineering ( Objective Type ) P Jaya Rami Reddy , Laxmi Publications , Reinforced Concrete Design S.Unnikrishna Pilla & Devadas Menon, Mc Graw Hill Publications , Limit State Design Of Steel Structures S K Duggal , Mc Graw Hill Publications , Basic And Applied Soil Mechanics , Gopal Ranjan & A S R Rao, New Age International Publications , Fluid Mechanics And Fluid Power Engineering Dr. D.S Kumar , Basics Of Mechanical Engineering Dr. D.S Kumar , Mechanical Engineering ( Objectives ) Dr. D.S Kumar , Refrigration And Air Conditioner Dr. D.S Kumar , Total Quality Management Dr.K.C.Arora , Engineering Drawing , Ps Gill , Textbook Of Machine Drawing, Ps Gill , Geomatric Dimensioning And Tolerancing , Ps Gill , Computer Aided Drafting Using Autocad , Ps Gill , Learning Autocad , Ps Gill , Auto Cad 2D Design Fundamentals , Ps Gill , Auto Cad 3D Models Fundamentals Ps Gill , Operation Research , Ap Verma , Textbook Of Industrial Management , Ap Verma & N.Mohan , Industrial Engineering And Management , Ap Verma , Stem Tables Rk Singal , Manufacturing Practices ( Workshop Practices ) Rk Singal , Engineering Metrology And Instrumention , Rk Rajput , Strength Of Materials , Rk Rajput , Textbook Of Material Science , Callister , Workshop Technology , Virendra Narula , Manufacturing Process , Virendra Narula , An Intoduction To Nc And Cnc , S.Vishal , Computer Aided Manufacturing, S.Vishal , Automobile Engineering , Km Moeed , Manufacturing Process I Sandy Khippal , Manufacturing Process Ii Sandy Khippal , Principals Of Powder Meatallurgy , Ps Gill , Inspection And Quality Control, Ap Verma , Automation Of Robotics, Khushdeep Goyal , Industrial Automation And Robotics, Khushdeep Goyal , Cnc Machines And Automation , Khushdeep Goyal , Production Planing And Control , Rk Singal , Theroy Of Machines , Rk Singal , Data Book For Designing Machine Elements , Arunkumar , Entreprenurship Development, Ranbirsingh , Unconventional Manufacturing Process , Rahul Jain , Mechanics Of Solids , Timoshenko , Engineering Mechanics , Timoshenko , Mechanics Of Solids , Egor P Popov , Fluid Mechanics And Fluid Power Engineering, Frank M White , Matlab For Dummies , John Mueller , Machine Learning For Dummies , John Mueller , Thermodynamics , Cengel , The Functional Aspects Of Communication Skills, Dr. P. Prasad , Professional Communication, Dr. P. Prasad , Universal English ( In The Twenty-First Century ) Dr. P. Prasad , Effectual Communication Skills , Bhupender Kaur , Engineering Physics, Dr. Abhijit Nayak , Essentials Of Physicsdr. Rakesh Dogra , Engineering Physics ( Aicte ) Dr. Rakesh Dogra , Applied Physics- Imanpreet Singh , Applied Physics -Iimanpreet Singh , Laser Systems & Applications, Dr. Rajesh Mishra , Engineering Physics-I, Dr. Rajesh Mishra , Fundamentals Of Polymer Science & Technology, Anshu Srivastava & Shakun Srivastava , Nuclear Science, Chanchal Garg , Petrochemicals, Anjana Srivastava , Impact Of Science Technology On Society, Ishwar Singh , Introduction To Bioscience , Dr. O.N. Pandey , Introduction To Bioscience Sweety Israni , A Textbook Of Nanoscience , Dr. Rakesh Kumar & Dr. Kamala Pati Tiwary , Professional Communicationdr. Raavee Tripathi , Technical Writing , Dr. O.N. Pandey , Engineering Economics , Dr. O.N. Pandey , Numerical Analysis Dr. Surbhi Gupta & Dr. Abhilasha Sharma , Business Environment , Anita Sengar , Numerical Methods , Girish Nayyar , Human Values And Professional Ethics , Smriti Srivastava , Discrete Mathematical Structures , Adesh K. Pandey & Rakesh Dube , Effective Technical Communication , Dr. Bharti Kukerja, Dr. Anupama Jain , Human Behaviour , Dr. Amit Jain , Organisational Behaviour , Er. Ishwar Singh, Dr. Bratpal Singh , Universal Human Values And Professional Ethics , Dr. Ritu Soryan , Soft Skills , Dr. Ritu Soryan , Communication Skills, Dr. Ritu Soryan , Constitution Of India , Richa Chaudhary, Arunima Mishra, Imran Khan , Concise Engineering Physics , Dr. Shiva Kant Pathak , Discrete Mathematicsanjana Gupta , Discrete Structures, Adesh K. Pandey , Discrete Structure, Kalika Patrai , Applied Mathematics- I, Dr. Hari Arora , Applied Mathematics- Ii, Anita Sachdeva & Hari Arora , Applied Mathematics- I, Dr. J.S.Bindra And K.S.Gill , Applied Mathematics- Ii, Dr. J.S.Bindra And K.S.Gill , Applied Mathematics- Iii, Dr. J.S.Bindra And K.S.Gill , Elements Of Engineering Mathematics- I Dr. V.P. Mishra , Elements Of Engineering Mathematics- Ii, Mishra & Mishra , Elements Of Engineering Mathematics- Iii, Mishra & Mishra , Engineering Mathematics-I , Mishra & Mishra , Question Bank In Engineering Mathematics , Mishra & Mishra , A Textbook Of Applied Mathematics-I, Dr. Hari Arora , A Textbook Of Applied Mathematics-Ii , Dr. Hari Arora , A Textbook Of Applied Mathematics-Iii , Dr. Hari Arora , A Textbook Of Applied Mathematics-Iv , Dr. Hari Arora , A Textbook Of Engineering Mathematics-Ii , Dr. Hari Arora , A Textbook Of Engineering Mathematics-I ( Calculus & Linear Algebra ) , Dr. Hari Arora , Applied Mathematics-Ii ( Previous Year Papers ) Dr. Hari Arora , Numerical Methods And Optimization Dr. Hari Arora , Probability & Statistics Dr. Hari Arora , Differential Equations And Complex Analysis Dr. Hari Arora , Numerical Methods For Engineers And Scientists Dr. Hari Arora , Engineering Mathematics-Iii Amit Gupta , Mathematics ( Cbse ) ( Class - Ix ) Upadhyay & Upadhyay , Mathematics ( Cbse ) ( Class - X ) Upadhyay & Upadhyay , Mathematics ( Cbse ) ( Class - Xi ) Upadhyay & Upadhyay , Mathematics For Mechanical Engineering ( A Solution Manual ) Salman Hussien Omran, Laith Jaffer Habeeb , A Textbook Of Finite Element Method , Pushpam Kumar Sinha , Engineering Chemistry , Dr. Sunita Rattan , Engineering Chemistry With Experiments , Dr. Sunita Rattan , Comprehensive Engineering Chemistry, Dr. Sunita Rattan , Experiments In Applied Chemistry , Dr. Sunita Rattan , Theory & Practical Of Engineering Chemistry, Dr. Sunita Rattan , A Textbook Of Engineering Chemistry , Dr. Sunita Rattan , Engineering Chemistry ( With Experiments ) , Dr. Sunita Rattan , Applied Chemistry- I, Dr. Raman Rani Mittal , Applied Chemistry- Ii, Dr. Raman Rani Mittal , Engineering Chemistry, Dr. Renu Gupta , New Course Engineering Chemistry, Dr. S.K. Bhasin , New Course Engineering Chemistry , Dr. S.K. Bhasin , Realm Of Space Science , Rajeev Garg , A Textbook Of Engineering Chemistry , Dr. Sunita Rattan , A Textbook Of Engineering Chemistry , Dr. Rajshree Khare , Applied Physics ( Theory & Experiments ) , Ritika Sorot Chauhan, Kavindar Tiwari , Applied Chemistry ( Theory & Experiments ) , Dr. Babita Bhardwaj , Junior English Revised , Haydn Richards => Limited
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
47.
Science and Technology #10497941 Price Bid
Tender For Supplying And Laying Of Electrical Cable From Substation To Waste Plastic Plant. -Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal / Coke And Salt As Required. 2 Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required 3 Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. 4 Laying Of One Number Additional Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required. 5 Above 185 Sq. Mm And Upto 400 Sq. Mm 6 Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. 7 Above 185 Sq. Mm And Upto 400 Sq. Mm 8 Supplying And Making Cable Route Marker With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Of Size 60 Cm X 60 Cm At The Bottom And 50 Cm X 50 Cm At The Top With A Thickness Of 10Cm Including Inscription Duly Engraved As Required. 9 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required 10 3½ X 240 Sq. Mm ( 62Mm ) 11 Providing 15Mm Thick Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) At All Levels. 12 Providing, Laying And Fixing Following Dia G.I. Pipe ( Medium Class ) In Ground Complete With G.I. Fittings Including Trenching ( 75 Cm Deep ) And Re-Filling Etc As Required 13 150 Mm Dia 14 Supplying And Laying Of Following Sizedwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc.Conforming Tois 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 15 120 Mm Dia ( Od-120 Mm & Id-103 Mm Nominal ) 16 Supplying And Laying Of Following Size Isi Marked Pvc Insulated And Pvc Sheathed / Xlpe / Frls ( Flame Proof, Water Proof ) Aluminium Conductor Steel Armoured Cable Of 1.1Kv Grade As Required. 17 3.5 X 240 Sqmm 18 Supplying & Febrication, Installation, Testing And Commissioning Of 4 Poles, Lt Indoor / Outdoor Panel With Double Wall Housing With Spacing About 6 Inchs With Each Other ( Duble Wall Cubical Panel For Environmental Protection ) Made Of 2 Mmthick Crca-Ms Sheet Suitable Housing Of 600 Mm Deep With Mounting Arrangement, 1000 A 4 Strip Aluminioum Busbar Duly Sleeved Making Suitable Hole For Cable Entries Detachble Gland Plates At Bottom Painting With Supierior Quaility . Bus Bar With Heat Shirnk Sleeves Etc, Dust And Vermin Proof Ip 65 Standred Having The Switch Gears And Metering Facility Compelete With Connections & Inter Connections Painting Etc.As Required. ( Every Seperate Feeder Name Plate Fabrication And Installation Work And About 2 Feet Height Solid High Quality Angle Iron Stand Is Also Included In This Item ) . The Panel Must Be Factory Fabricated.The Drawing Of The Panel Fabricated And After Fabrication The Same Will Be Inspected And Aproved By Engineer-In-Charge Before Its Dispatch From Factory To Site.Panel Must Be Provided With Mentioned Below ( As 12.01 ) Items. 19 Incoming:-A. 400 A, Four Pole Mccb Adjustable Thermal & Adjustable Magnetic Setting, Breaking Capacity 36 Ka, -01 No. C. Vipf Multi Function Meter ( Hpl / Havells ) - 01 No. D. Cts-1200 A / 5A- 01 Sete. Indicator Lamp- 01 Set Outgoing:-A. 250 A, Four Pole Mccb, Breaking Cap-25 Ka-02 Nos.B. 200 A, Four Pole Mccb, Breaking Cap-25 Ka-02 Nos. Note:- Dismentaling The Old Panels, Cables & Switchgears And Fixing Of New Panels, All Cable And Supplying & Fixing Of New Switchgears Installaton, Testing Snd Commissionning & Other Fixing Works Are Included With The Same. 20 Supplying & Febrication, Installation, Testing And Commissioning Of 4 Poles, Lt Indoor / Outdoor Panel With Double Wall Housing With Spacing About 6 Inchs With Each Other ( Duble Wall Cubical Panel For Environmental Protection ) Made Of 2 Mmthick Crca-Ms Sheet Suitable Housing Of 600 Mm Deep With Mounting Arrangement, 1200 A 4 Strip Aluminioum Busbar Duly Sleeved Making Suitable Hole For Cable Entries Detachble Gland Plates At Bottom Painting With Supierior Quaility . Bus Bar With Heat Shirnk Sleeves Etc, Dust And Vermin Proof Ip 65 Standred Having The Switch Gears And Metering Facility Compelete With Connections & Inter Connections Painting Etc.As Required. ( Every Seperate Feeder Name Plate Fabrication And Installation Work And About 2 Feet Height Solid High Quality Angle Iron Stand Is Also Included In This Item ) . The Panel Must Be Factory Fabricated.The Drawing Of The Panel Fabricated And After Fabrication The Same Will Be Inspected And Aproved By Engineer-In-Charge Before Its Dispatch From Factory To Site. Panel Must Be Provided With Mentioned Below ( As 12.01 ) Items. 21 Fittd With:-A. 1000 A, Four Pole Acb With Microprocesser Release Ipr 1 + ( 4 Pole ) Auto Electrical Drawout & Adjustable Magnetic Setting, Breaking Capacity 50 Ka, With All Acceossories Etc.Reqiuired. ( Legrand / Havells / L&T ) -01 No. 22 Supplying & Febrication, Installation, Testing And Commissioning Of 4 Poles, Lt Outdoor Panel With Double Wall Housing With Spacing About 6 Inchs With Each Other ( Duble Wall Cubical Panel For Environmental Protection ) Made Of 2 Mmthick Crca-Ms Sheet Suitable Housing ( 1050 Mm X 550 Mm ) Of 500 Mm Deep With Mounting Arrangement, 1000 A 4 Strip Aluminioum Busbar Duly Sleeved Making Suitable Hole For Cable Entries Detachble Gland Plates At Bottom Painting With Supierior Quaility . Bus Bar With Heat Shirnk Sleeves Etc, Dust And Vermin Proof Ip 65 Standred Having The Switch Gears And Metering Facility Compelete With Connections & Inter Connections Painting Etc.As Required. ( Every Seperate Feeder Name Plate Fabrication And Installation Work And About 2 Feet Height Solid High Quality Angle Iron Stand Is Also Included In This Item ) . The Panel Must Be Factory Fabricated.The Drawing Of The Panel Fabricated And After Fabrication The Same Will Be Inspected And Aproved By Engineer-In-Charge Before Its Dispatch From Factory To Site.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Uttarakhand View Result →
49.
Water Resources and Irrigation #10457859 Price Bid
Providing And Fixing Of Open Gym Equipments At Kalindi College Premises In Patel Nagar Assembly Constituency 24--- 1 Providing And Fixing Of Air Walker / Health Walker. Health Walker Of Size 1070X 615X1509mm Fabricated With Main Post Of 114Mm “C” Class G.I. Pipe Made Of Hot Roller Tubular Steel And Hot Dipped Galvanized And Powder Welded Coated Using Akzo Nobel Of 60-80 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury And Base Plate Cover To Be Made From Virgin Llpde Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm Colourful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Made Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-Incharge. Equipment To Be Fitted With In Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welded Points Prior To Finishing. All Complete As Per The Technical Specifications To Manufacture The Item. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 2 Providing And Installation Of Surf Board / Air Swing. Surf Board In Pair Of Size 1150 X 900 X 1250Mm Fabricated With Main Post Of 114Mm Dia And “C” Class G.I. Pipe As Per Is-1239 Andrest Of The Pipe 40Mm Dia“C” Class G.I. Pipe As Per Is-1239 And Powder Coated Using Akzo Nobel Or Equivalent Of 60-80 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Of Nylon Alloy With Rounded Edges To Prevent Any Impact Of Injury And Base Plate Cover To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm Colorful And Uv Resistant And Environmental Friendly Or Frp Material Of Same Specification, Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Closed By Gi / Lldpe / Frp Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete After Deep Excavation Work Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate. All Complete As Per The Technical Specifications Tomanufacture The Item.Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 3 Providing And Fixing Of Shoulder Twirl Double / Big Shoulder Wheel. Big Shoulder Wheel Seated Chest Press Of Size 857X850x1815mm Fabricated With Main Post Of 114Mm And “C” Class G.I. Pipe Made Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nodel Of 60-80Mm Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welding Points Prior To Finishing. All Complete As Per The Technical Specifications To Manufacture The Item. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 4 Providing And Fixing Of Hand Rower / Rower Machine. The Main Frame Of Hand Rower Size: 1475X860-80X1065mm With Main Post Of 114Mm Dia And 4 Mm Thick “C” Class G.I. Pipe And Frp ( Fiber Reinforced Plastic Seat With Backrest Is Fixed Over 40Nb Galvanized Bend Pipe. This Bend Pipe Is Further Linked To 114Nb Base Pipe &, With Help Of Connecting Links. Connecting Links Are Made Up Of 25Nb G.I. Pipes With Specially Designed Metal Bush At Ends. The Paired 25Nb Pipe Handle With Rubber Grip At The End Is Fixed Over One Of The Connecting Link. The Rolling Frame Is Made By 40 Nb & 20 Nb G.I. Pipes. Connecting Links Are Hinged In Between Seat Frame And Base Frame With Specially Designed Bush Bearings. A Suitable Pvc / Rubber Grip Is Provided Forthe Pipe Ring. The G.I. Pipe To Be Used Of Standard Make And C-Class . Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 5 Providing And Fixing Of Knee Back Stretch / Leg Stretch Of Size1200x550x900mm Fabricated With Main Post Of 114Mm And 4.00Mm Thick “C” Class G.I. Pipe Made Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nobel Of 80-120Mm Micron Thick, Frp / Hdpe / Lldpe ( Fiber Reinforced Plastic / High Density Poly Ethylene / Linear Low Density Poly Ethylene ) Seat With Backrest Is Fixed Over 40Nb Galvanized Bend Pipe. This Bend Pipe Is Further Attached To 114Nb Main Supporting Pipe. The Paired 25Nb Pipe Handle With Rubber Grip At The End Is Fixed Over 40Nb Pipe Frame. The Rolling Frame Is Made By 40 Nb & 20 Nb G.I. Pipes.Rolling Frame Is Hinged At The One End Of 40 Nb Bend Pipe Frame With Specially Designed Bush Bearing. A Suitable Pvc / Rubber Grip Is Provided For Foot Rest On Rolling Frame. All Pipes Are Uniformly Powder Coated Up To Minimum 60-80 Micron Thickness To Avoid Corrosion. All Open Ends Of Pipe Been Closedby Gi / Hdpe Caps For User Safety Against Entrapment. Handle For Rotating The Ring Fixed Over The Pipe Ring. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Each 46000 / -Excavation In Earth At Site 6 Providing And Fixing Of Hip Twister Double / Waist Twister. The Waist Twister Of Size Size1840x1840x2000mm Fabricated With Main Post Of 114Mm “C” Class G. I. Pipe Made Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated Using Akzo Nodel Of 60-80Mm Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint Are Applied At All Welding Points Prior To Finishing. Rotating And Base Plate Cover To Be Made From Virgin Llpde Manufactured By Rotational Moulding With Minimum Thickness Of Plastic Of 8Mm Colourful And Uv Resistant And Environmental Friendly. Bearing Used Shall Be Made Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted With Inbuilt Limiter To Prevent Unwanted Movement. All Complete As Per The Technical Specifications To Manufacture The Item. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site. 7 Providing & Fixing Of Dualsky Walker / Double Cross Walker. Double Cross Walker Of Size 160- 800 X 60-800 X 160-800 Mm Fabricated With Main Post Of 114Mm Dia And “C” Class G.I. Pipe As Per Is1239 And Rest Of The Pipe 40Mm Dia “C” Class G.I. Pipe As Per Is-1239 And Powder Coated Using Akzo Nobel Or Equivalent Of 60-80 Micron Thick. All Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Pedals Shall Be Made Up Of Nylon Alloy With Rounded Edges To Prevent Any Impact Or Injury And Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Each 83000 / - Rotational Moulding With Minimum Thickness Of Plastic As 8Mm Colorful And Uv Resistant And Environmental Friendly Or Frp Material Of Same Specification, Bearing Used Shall Be Maintenance Free, Duly Oil Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters To Prevent Unwanted Movement. All Open Ends Of Pipe To Be Closed By Gi / Lldpe / Frp Caps For User Safety. Theequipment To Be Fixed On Ground With Concrete After Deep Excavation Work Of Minimum Strength M-25 And J Shape Welded Bolts And Once The Concrete Is Set, Fix The Equipments On To It And Cover With The Base Plate. Complete Equipment To Be Fix In C:C Block ( 1:1 ½ :3 ) Of Size 50 X 50 X50 Cm After Deep Excavation In Earth At Site.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
50.
Road Transport and Highways #10434493 Price Bid
Consultancy Services For Balance Works Of Land Acquisition Plan , Forest Clearances Proposals And Other Pre Construction Activities In Respect Of Detailed Project Report ( Drp ) For Sainj-Luhri-Jalori-Banjar-Aut Road Excluding Jalori Pass Tunnel Of Nh-3 , Remuneration For Local Staff ( Inclusive Of Per Diem Allowance ) , Team Leader Cum Senior Highway Engineer , Senior Survey Engineer , Environmental Specialist , Quantity Surveyor/ Documentation Expert , Land Acquisition Expert , Utility Expert , Sub Professional Staff ( To Be Assessed By Consultant As Per Requirement Of Assignment And One Sub-Professional Be A Fresh Graduate ) , Position , Position , Position , Position , Position , Position , Position , Support Staff ( Inclusive Of Per Diem Allowance ) Note: To Be Assessed By Consultant As Per Requirement Of Assignment , Office Manager , Typist , Office Boy , Night Watchman , Transportation ( Fixed Costs ) , The Vehicles Hired By The Consultant Shall Include The Cost For Rental , Drivers , Operation , Maintenance , Repairs , Insurance , Etc . , Duty Travel To Site ( Fixed Costs ) , Trips , Office Rent ( Fixed Costs ) The Rent Cost Includes Maintenance , Cleaning , Repairs , Etc . , Office Rent , Office Supplies , Utilities And Communication ( Fixed Costs ) , Office Supplies Drafting , Supplies Computer , Running Costs , Domestic And International Communication , Office Furniture And Equipment ( Rental ) , Office Furniture And Equipment , Reports And Document Printing , Monthly Report ( 3 Copies Per Month ) , Updated Environment And Social Impact , Strip Plan With L . A . Reports , Draft La And Clearances I Report , Final La And Clearances I Report , Draft Environmental Assessment Report& Rap , Final Environmental Assessment Report& Rap , Updated Bill Of Quantities , Updated Cost Estimates , Draft 3 ( A ) , 3 ( A ) And 3 ( D ) & 3G Notification For Land Acquisition ( 3 Copies Each ) , La & Clearances Ii Report , Investigation ( Fixed Cost ) ( Lumpsum ) , Land Acquisition Studies , Any Other Investigations/Surveys , Fixing Boundary Pillars , Procuring And Fixing Boundary Pillars And Its Installation , Complete In All Respect As Per Irc:25 , 1967: Wherever The Proposed Alignment Follows The Existing Alignment , The Boundary Pillars Shall Be Fixed At An Interval Of 200M On Either Side Of Proposed Right Of Way . Wherever There Is A Proposal Of Realignment Of The Existing Highway And/Or Construction Of New Bypasses , Consultant Shall Fix Boundary Pillars Along The Proposed Alignment On The Extreme Boundary On Either Side Of The Project Highway At 50 M Interval , Land Acquisition Team Including Support Staff And Logistics/Transportation , Ex-Land Revenue Inspector/Officer Or Equivalent , Ex-Kanoogo/Girdwar Or Equivalent , Ex-Patwari Or Equivalent , Typist ( 2 Nos . X6months ) , Peon , Logistics For Land Acquisition Team , Computer Including NecessaryPeripherals ( 2 Nos . X6 Months ) , Printers ( 2 Nos . X 6 Months ) , Vehicles ( Bolero Or Equivalent ) With Monthly Running Limit Of 4000 Km , Estimate Of Expatriateconsultants ( Name And Position To Be Filled In Below Columns By The Bidder ) , Position , Position , Moblization And Demoblization- International Airfares ( Fixed Costs ) ( To Be Filled By Bidders In Below Columns ) , Moblization And Demoblization-Inland Travel In Home Country ( Fixed Costs ) , Other Miscellaneous Expenses ( Like Da , Internal Travel Expenses Other Incidentals ) ( Fixed Cost )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Himachal Pradesh View Result →
TenderDetail
Loading tenders