View Bid Results For Anti Vibration Pad Tenders

We found 542 Bid Results related to anti vibration pad tenders. You can find Contractor details who won anti vibration pad tenders along with contract details in Bid awards announcements section.

Indian Tenders
24
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
432
74
36
Tender Publishing Platform
162
380
State / UT
33
73
49
48
48
40
32
29
23
20
20
19
16
15
13
13
13
11
9
8
8
7
6
5
3
3
2
2
2
1
1
1
1
1
Contract Value
188
137
142
75
Publish Date
0
0
0
0
0
Sector
25
159
102
42
35
34
32
26
19
13
12
11
9
9
8
6
5
5
4
2
2
2
2
1
1
1
Ownership
6
292
163
53
30
3
1
Within keyword
Active filters:
Showing 1–11 of 542 tenders matching your filters
1.
Public Administrative Department #11501779 AOC
Bids Are invited for Kay Rotary Twin Lobe Air Blower For Bed Material Conveying System , Safety Valve Dead Weight Type For Bed Ash Conveying Blower, Model No. 1016 Ac , Set Of Gear For Bed Ash Conveying Blower , Model No. 1016Ac , Oil Level Glass For Bed Ash Conveying Blower, Model No. 1016 Ac , Casing For Bed Ash Conveying Blower, Model No. 1016 Ac , Discharge Silencer For Bed Ash Conveying Blower, Model No. 1016 Ac , Suction Silencer For Bed Ash Conveying Blower, Model No. 1016 Ac , Common Base Frame With Slide Rail For Bed Ash Conveying Blower, Model No. 1016 Ac , V-Belt Guard For Bed Ash Conveying Blower, Model No. 1016 Ac , Anti Vibration Pads For Bed Ash Conveying Blower, Model No. 1016 Ac Total Quantity : 42
Contract Date: Ref. Documents Contract Value : ₹ 24.12 Lakh
Government Departments No of Bidders 1
Rajasthan View Result →
Gujarat View Result →
3.
Railways #11340380 AOC
Supply Of supply and commissioning of centrifugal pumping unit as per schedule of requirements , supply and commissioning of centrifugal pump motor set (with base &coupling) of discharge @ 21840lpm at a total head of 55 m. coupled with electric motor3phase 415 volt 50hzof capacity 100hp/7 5kw ,1475 rpm,4pole,ci impeller. the pump motor set will be installed on ms fabricated base frame couple d with flexible coupling with coupling guard. the base frame with anti-vibration padis to be installed over c c foundation in ratio1:2:4 of required size as per site conditions. body earthing of pump set to be done with one no. gi strip of size(25x5)mm &connected by suitable size/types of nuts/bolts to the earth system. make -ksb/kirloskar/crompton greaves/cri. [ warranty period: 30 months after the date of delivery ] ] , supply and commissioning of centrifugal pump motor set (with base &coupling) of discharge @ 12480 lpm at a total head of 18 meter coupled with electric motor 3phase 415 volt50hz of capacity20hp /15kw,1500rpm,4 pole ,ci impeller. the pump motor set will be installed on ms fabricated base frame coup led with flexible coupling with coupling guard. the base frame with anti-vibration pad is to be installed over cc foundation in ratio1:2:4 of required size as per site conditions. body earthing of pump set to be done wi th one no. gi strip of size(25x5)mm &connected by suitable size/ types of nuts/bolts to the earth system. m ake-ksb/kirloskar/crompton greaves/cri [ warranty period: 30 months after the date of delivery ] ]
Contract Date: Jun 24, 2026 Contract Value : ₹ 6.33 Lakh
Government Departments No of Bidders 1
Assam View Result →
Bihar View Result →
5.
Defence #11281747 Technical Bid
Tender For Provision Of Defi Md Accommodation At Kota Mil Stn; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 4 Lump sum price worked out by the contractor for ROAD, PATH, CULVERT AND HARD STANDINGas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 5 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 7 Lump sum price worked out by the contractor for FENCINGas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 8 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 9 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 10 Lump sum price worked out by the contractor for LIGHTING PROTECTION as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 11 Lump sum price worked out by the contractor for FIRE FIGHTINGas listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 12 Lump sum price worked out by the contractor for LIFT WORKas listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 13 Lump sum price worked out by the contractor for HOT WATER SUPPLYas listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 14 Lump sum price worked out by the contractor for DG SETSas listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 15 Lump sum price worked out by the contractor for SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORKas listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 16 Sch A Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes:(i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XVSITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORK schedule). 17 INTERNAL WATER SUPPLYS&F for 15mm dia sink mixer (wall mounted) with 150mm long swivel spout,connecting legs and wall flangerswith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2014511 / Hindware Cat Part No F690058 / Parryware Cat Part No G3335A1 or equivalent make as mentioned in Appx B. 18 S&F for 15mm dia single lever center hole basin mixerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F1015451 / Hindware Cat Part No F690012 / Parryware Cat Part No G4863A1 or equivalent make as mentioned in Appx B. 19 S&F for 15mm dia wall mixture with bend pipe for overhead showerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2002401 / Hindware Cat Part No F330020 / Parryware Cat Part No G3316A1 or equivalent make as mentioned in Appx B. 20 INTERNAL ELECTRIFICATIONS&F ofmodular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005as specified in IS 732: 2019 etc complete all as specified and directed 21 S&F for modular type 1 module RJ-11 telephone socket with shutter etc complete all as specified and directed 22 S&F for modular type 1 module co-axial type TV socket etc complete all as specified and directed 23 S & F for 16 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 24 S & F for 25 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 25 S & F for 32 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 26 S & F for 40 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 27 S&F forSingle Phase Dual Source Pre Paid Meter, Class 1.0, RS485,10/60A Direct,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 28 S&F forThree Phase Dual Source Pre Paid Meter, Class 1.0, RS485, 5A CT operated,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 29 S&F of Sheet metal enclosure distribution board VTPN4 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 30 S&F of Sheet metal enclosure distribution board VTPN6 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 31 S&F of 160A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply etc complete all as specified and directed by engineer-in-charge. 32 S&F for 12W LED Downlight having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed . 33 S&F for LED light fitting with high 10 watt 220 V AC decorative wall type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed . 34 S&F for 10W LED bulk head light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed. 35 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 600 mm sweep. Min air delivery 115 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directed by engineer-in-charge. 36 Supply and fix Wall Mounting Fan, steel body AC single Phase, 230V,With Sweep Size, 200mm ; Motor Speed 84CMM, 3 blades, and frame and louvers etc complete all as specified and directed by engineer-in-charge. 37 Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type BUILDING PANEL (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge.The BUILDING PANEL shall comprise of the following:(A) Bus bar Chamber(i) 01 Set (3L + N) of copper busbar of rated capacity 400A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connections. 38 (B) Incoming:- (i)320A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 No.(ii) Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 No.(iii) LED phase indicators (Red, Yellow, Blue)- 01 Set 39 (C) Outgoing:-(i)40A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, havingtrip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 08 Nos(ii) LED phase indicators (Red, Yellow, Blue)- 08 Sets 40 SEWAGE DISPOSALS&F for DWCPE (SN8) 180mm outer dia and 163 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8)with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 41 S&F for DWCPE (SN8) 200mm outer dia and 175 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 42 S&F for DWCPE (SN8) 300mm outer dia and 260 inner dia of pipe for depth 1.65mm to 2.3m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 43 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-7 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 44 S&F forNonclog submersible (sewage disposal), pump set, electric driven 415 Volts 3 Phase 50 Hz, supply comprising of pump with cast iron impellors, submersible motor of suitable capacity, coupling, at discharge 3360 to 480 LPM and minimum discharge should be less than 480 LPM at minimum head 14 m.including chain pully block of two MT capacity 01 Noandsuitable arrangement for hanging the motor through chain of requirement of delivery of pump connected to main pipe line by suitabe HDPE pipe of size 150mm Dia for required length with necessary connection etc all as specified and as directed. 45 Supply,installing, testingand commissioningout door type LT feeder piller box of suitable size 750X750X450 mm, pedestal mounted, CPRI type test totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and paintedto both internal and External surfaces with powder coating paint in heatprocess of sheet and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and includingfollowing accessories and mounted on PCC Platform made out of100 mm thick PCC (1:3:6),0.45 Mtr all round the panel board etc complete with the following items :- 46 Incoming:- (i) Copper bus bar made up of copper strip100 amps duly mounted on bakelite insulatorssleevings of standard colour code - 01 Set. (04 No strips for Phases & Neutral)(ii) MCCB TPN 415 Volts,63 Amps, 50 Hz, breaking capacity 25 KA with fixed thermal & magnetic setting ( For Incomming ) - 01 No.Outgoing:-(i) MCB TP 415 volts 32 Amps, breaking capacity 16 KA with fixed thermal & magnetic setting ( For FPB2 ) - 03 Nos(2 nos for pump 1 nos for spare). (ii) FASD Starter for 15 HP Motor with single phase preventer, OLP and dry run protector- 02 Nos 47 (iii) Analogue type modular volt meterof range 0-500 volts -01 No(iv)Volt meter selector switch-01 No.(v) Analogue typeAmmeter of range 0-200 Amp-01 No(vi) Ammeter selector switch-01 No(set of three)(vii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (Red, Orange, Blue) - 01 set(viii) CT 200/5 Amps - 3 Nos 48 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 49 S&F forPVC insulated and sheathed 1100 volts grade flat type submersible 06 sqmm cable three core multi stranded conductor etc complete all as specified and directed . 50 M&L for Making drill hole by trenchless technologyof suitable size under road for laying pipe line of size150mm bore at 1 metre depth from the road level etc complete all as specified and directed.Note :- Drill hole (trenchless) shall be done without disturbing top surfaces of road by appropriate machine. 51 M&L for steel gate 5.45 m wide and 2.70 m height with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 52 EXTERNAL WATER SUPPLY Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 100mm bore class K-9 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 53 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-9 IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 54 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 55 Supply and fix CI foot valve with leather washer, ofsize 100 mm , lift and swing, single door, IS 4038 marked one with each pump suction line complete all as specified and directed. 56 M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primerfor the size of chamber 1200 mm x 1200 mm x 1200 mm (internal dimention) complete all as specified and directed. 57 Supply, install,commissioning and testing of Horizontal split case cetrifugal pump set 1450 RPM having an output of minimum 1100 LPM at a head of 45 mtr coupled to 3 phase 415 volt squirel case induction motor of adequate capacity complete all as ditected by Engr-in-charge with and including following :-(a) Necessary cable for interconnection between starter panel & pump set with 1100 volt rated copperinsulated unarmoured cable of minium 10 sqmm 3 core cable(b) Single phase preventer (current sensing type)(c) Necessary light grade GI pipe protection for cabling from pump set to LT panel.(d) Bourden pressure gauge.(e) MS pipe flanged type class B of size 100 mm bore upto foot valve from suction end of pump.(f) PCC foundation in type B-2, 1:2:4 using 20mm graded aggregate, 20cm above ground level and 30cm below grond level including grouting of eye bolts nut etc. for pump set of adequate size or as per manufacturers recommendations.Note: All other items/material requiredfor fixing pumpset shall be included in cost quoted.(ii) Foundation drawing shall be approved by GE/ Eng-In- Charge before fixing the pump set. 58 Supply, installations, testing and commissioning of factory made LT Indoor cubical typepanel boardhaving 150 Amp rated copper bus bar with neoprene rubber gasket and locking arrangement, dust,weather and verminproof , free standing, floor mounting type self ventilation with wire mesh,totally enclosed busbar chamber fully comparted type, front openable hinged independent door for each compartment with locking arrangement and common openable hinged door from rear side of suitable size made out of 2mm thick CRCA sheet duly painted with seven tank process,415 V,TPN,50Hz both side properly welded MS angular supported with chanel frame of size 50mm,at all vertical corner grouted in PCC 1:3:6 (Type-C1 using 20mm graded stone aggregate) and connecting the incomming/outgoing feeder by providing brass cable glands and Lugs complete all as specified and directed comprising of followings accessories:- 59 Incoming:- (i) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal Setting-01 No.Outgoing:-(i)MCCB 3 Pole 63 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with adjustable thermal Setting - 02 Nos (ii) Single phase preventor -02 Nos(iii) On load Change over switch 4 pole of current raring 63 A (open execution type) - 01 No(iv)MCB SPN 10 Amp C curve, 10 KA capacity - 01 No(v) fully automatic Star-delta starter 15 HP or recommended by manufacturer of motor -02 Nos(vi) LED Indicator lamp (R,Y,B)- Set of Three.(vii) Multifunctional meterDigital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase -0 1No. 60 M&L for construction of header of ERW pipe having size dia 300 mm and length 2.5 m with two inlet connection of size 100 mm & three otlet connection having size 150 mm complete monting on RCC base/plinth etc complete all as specified and as directed by Engr-in-charge. 61 EXTERNAL ELECTRIFICATIONBoring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe upto 100mm dia complete all as specified and directed.Note :- GI pipe shall be measured and paid separately. 62 Taking out existing HT XLPE U/G cables, 11000 V grade from trenches/ducts/ poles etc of size 120 Sq. mm 3 Core etccomplete all as specified and directed. 63 Dismantling and taking down existing transformer mounted on four pole structure and shifting to nearest suitable location including its fixing on newly constructed platform and making all connection, testing as per requirementetccomplete all as specified and directed. 64 Dismantling and taking down existing 4-pole structure etccomplete all as specified and directed. 65 Dismantling and taking down existing 03 Nos of LT Panels, refixing at specified locationincluding connecting etc complete all specified and directed. 66 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 240 Sq. mm 3.5 Core etc complete all as specified and directed. 67 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 185 Sq. mm 3.5 Core etc complete all as specified and directed. 68 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size upto 95 Sq. mm 3.5 Core etc complete all as specified and directed.Note For item No. 57 to 63 :- The old material obtained from site shall be deposite by contractor in MES store yard without any extra cost as directed by GE. 69 M&L for construction of plateform of size 3500 x 3500 x 1200mm with brick construction in cement mortar 1:4 PCC (M-10 nominal mix) in foundation, 100mm thick RCC M-25 grade slab, with 8mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side XPM Jali fixed on angle iron 40x 40x6 mm post upto height of 8 feet above ground level and openable gate with locking arrangment including making provision for entry and exit of HT/LT cables and steps made to access to the top of plateform including plastering to bricks masonary complete including painting with 2 coats of whitewash on plastered surface and painting steel surface with 2 coats of red oxide primeretc complete all as specified and directed. 70 Supply & fix HT 11 KV, outdoor type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complee with drop out fuse having 12 insulators of rating upto 200 Amps etc complete all as specified and directed. 71 Supply and fixing lightning arrestor HT 11 KV, 10 KA station class etc complete all as specified and directed. 72 Supply & errect 2 pole structure on 11 mtr PCC pole consisting of pole with anti-climbing device, PCC foundation & cross arms (Bracings) etc for one incoming and one out going. etc complete all as specified and directed. 73 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station (CSS) ,315KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply .Package substation will have the following equipment :- 74 HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos 75 (vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 SetTRANSFORMER315 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 955W and Max Losses @ 100% Load 2750 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be conforming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 500 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)500 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB)(ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 76 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust. 77 construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 78 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station , (CSS) 400KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply.Package substation will have the following equipment :-HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the 79 RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos.(vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set 80 TRANSFORMER400 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 1150W and Max Losses @ 100% Load 3330 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 630 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)630 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) (ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 81 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robustconstruction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 82 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge(Panel 1 - Near mains transformer GTC Area):- 83 INCOMING :-(i) S&F ACB 4 Pole 630 amps ,415 Volt electrical drawout type of breaking capacity not less than50 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 750 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBsOUTGOING:-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of block )(ii) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(ivDigital volt meter 0-400 V with selector switch - 01 No.(v)LED Indicating Lamps R,Y,B - 01 Set of three 84 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2 - Near Chambal Vihar Main Tfr Panel):-INCOMING :-(a) S&F MCCB 4 Pole 500 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(b) Aluminium electrolite Busbar 600 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 85 OUTGOING:-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of blocks)(ii) S&F MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Street light timer using Power contactor 32 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(iv)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(v)Digital volt meter 0-400 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 86 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1A - LT PANEL FOR 3 X BLOCKS GTC):-INCOMING :-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 87 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 04 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 88 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2A - LT PANEL FOR 2 X BLOCKS CHAMBAL VIHAR):-INCOMING :-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 89 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 03 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 90 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1B & 2B):-INCOMING :-(i) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range-01 No incoming.(ii) Aluminium Electrolite Busbar 300Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 91 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series. - 01 Nos (for PH Panel)(ii) MCCB 4 pole 40 Amp, 415 V, 16 KA, C-series- 02 Nos (sewage PH +spare).(iii) MCB TPN 25Amp, 230 V, 10 KA, C-series - 07 Nos (Lifts+fire fighting+Street lights)(iv)Street light timer using Power contactor 25 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(v) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(vi) Digital volt meter 0-500 V with selector switch - 01 No. (vii) On load Change over switch 4 pole of current raring 63-100 A (open execution type) - 01 No.(viii)LED Indicating Lamps R,Y,B - 01 Set of three 92 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel D - DOE Area):-INCOMING :-(i) S&F MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0)-01 No incoming.(ii) Aluminium Electrolite Busbar 150 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 93 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series - 02 Nos (for Bldg + Spare)(ii) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (Garages + Spare).(iii) MCB SPN 10 Amp, 230 V, 10 KA, C-series - 02 Nos (Security light + Spare)(iv) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(v) Digital volt meter 0-500 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 94 M&L for factory made busbar box 750 Amps rated Aluminium busbar, 3 phase, 4 wire, 415 Volt of size not less than 300mm x 200mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wal by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 95 M&L for factory made busbar box 600 Amps rated Aluminium busbar, 1 phase, 245 Volt, size not less than 200mm x 150mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wall by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 96 Supply and fixing poly carbonatejunction box , weather and vermin proof of size 250X250X160 including provn of 4 Nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitabely mounted on bus bar insulators ,including one No. MCB SP 6 Amps for light control,drilling of holes.Provn of suitable size of GI nuts, bolts, double washer and FI clamps ofsuitable sizefor taking connections and fixing on LT steel tubular poles complete with locking arrangementcomplete all as specified and directed. 97 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5Sqmm 1100 Volt , draw through LT steel tubular polesfor connection to street light from junction boxetc complete all as specified & directed. 98 S&F for Cable route indicator, duly engraved with LT CABLE 1100 VOLT on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size etc complete all as specified & directed. 99 M&L for Precast PCC (1:2:4) type B-1 cable path indicators of size 300x100x500mm rounded top having engraved in capital letters HT Cable embedded in position in PCC(1:3:6) Type C-1, using necessary formwork and including provision of two coats of cement base paint on exposed concrete surface and writing HT Cable in black synthetic enamel paint etc complete all as specified & directed. 100 M&L fordecorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watts including LED lamp etc complete all as specified & directed. 101 M& L for shifting of 33 KV HT cable to a safe distance from proposed building, supply, laying, testing & commisioning of 33 KV cable in replacement with new as per estimate provided by State electricity deptetc etc complete all as specified & directed. 102 FIRE FIGHTINGS&F forAutomatic air release valve 50mm dia suitable for domestic water with 25mm gun metal stop valveetc complete all as specified & directed. 103 S&F forbranch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090etc complete all as specified and directed. 104 S&F forfix Valve, stop, screwed, 25 mmdia pipeetc complete all as specified and directed. 105 S&F for6 kg capacity Multipurpose dry chemical powder (ABC) type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/charged .etc complete all as specified and directed. 106 S&F forCO2 type fire extinguisher of 3 Kgs capacity with steel cylinder with a discharge valve and confirming to IS : 15683.Extinguisher shall be painted with red enamel apint and fixed to wall with bracket etc complete all as specified and directed. 107 S&F for9 Ltr capacity Foam type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/chargedetc complete all as specified and directed. 108 S&F fortesting of Star-Delta starter Panel for fire fighting pump motor etc complete all as specified and directed. 109 Supply, installation, testing & commissioning ofFIRE SIGNAGES for indication/information of fire exit, alarm panel, fire extinguishers fire axe, hose reel, hydrents, lifts of size 300mmx100mm etc complete all as specified and directed. 110 DG SETSSupply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 180 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 111 (A) Engine (prime mover) : Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. 112 (C) Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate.(D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1No 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications.(F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - 113 (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running (iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- 114 AC voltmeter - 01NoVoltmeter selector switch OFF/RY/YB/BR - 01NoFrequency meter - 01NoAC voltmeter of suitable scale - 01NoAmmeter selector switch OFF/R/Y/B - 01NoCurrent transformers of suitable ratio - 01NoBattery charger consisting of - 01No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01NoMains supply voltage monitor - 01NoSet of DC control relays and timers - 01NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01No 115 01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 116 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 117 Supply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 125 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 118 (A) Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. (C)Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate. 119 (D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1Nos 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications. 120 (F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running(iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- AC voltmeter -01 NoVoltmeter selector switch OFF/RY/YB/BR - 01 No 121 Frequency meter - 01 NoAC voltmeter of suitable scale - 01 NoAmmeter selector switch OFF/R/Y/B - 01 NoCurrent transformers of suitable ratio - 01 NoBattery charger consisting of - 01 No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01 NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01 NoMains supply voltage monitor - 01 NoSet of DC control relays and timers - 01 NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01 No01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. 122 KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 123 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 124 Supply, installations, testing of electric chimney of size 60cm havingsuction capacity of 1200 cum per hour with filterless technology sealed motor and insulationfor oil deposit and water vapour alongwith self autoclean feature after 30 cycles of operation and minimum 5 year warranty etc etc complete all as specified and directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Rajasthan View Result →
6.
Power #11279749 AOC
Bids Are invited for Suction Filter for Regenerative Blower Model No.M5175 Make Everest , Set of Lip Seal and O Ring for Regenerative Blower Model No.M5175 Make Everest , Set of Bearing for Regenerative Blower Model No.M5175 Make Everest , Set of Rotor with shaft for Regenerative Blower Model No.M5175 Make Everest , Set of Gears with Hub Complete with Hardware for Regenerative Blower ModM5175 , Suction Silencer for Regenerative Blower Model No.M5175 Make Everest , Set of Gasket for Regenerative Blower Model No.M5175 Make Everest , Bellow for Regenerative Blower Model No.M5175 Make Everest , NRV for Regenerative Blower Model No.M5175 Make Everest , Pressure Relief Valve for Regenerative Blower Model No.M5175 Make Everest , Blower Pulley for Regenerative Blower Model No.M5175 Make Everest , Motor Pulley for Regenerative Blower Model No.M5175 Make Everest , Discharge Silencer for Regenerative Blower Model No.M5175 Make Everest , Anti Vibration Pad for Regenerative Blower Model No.M5175 Make Everest , Suction Filter for CPU Blower Model No.M5225 Make Everest , Set of Lip Seal and O Ring for CPU Blower Model No.M5225 Make Everest , Set of Bearing for CPU Blower Model No.M5225 Make Everest , Set of Gears with Hub Complete with Hardware for CPU Blower Model No.M5225 , Suction Silencer for CPU Blower Model No.M5225 Make Everest , Set of Gasket for CPU Blower Model No.M5225 Make Everest , Bellow for CPU Blower Model No.M5225 Make Everest , NRV for CPU Blower Model No.M5225 Make Everest , Pressure Relief Valve for CPU Blower Model No.M5225 Make Everest , Blower Pulley for CPU Blower Model No.M5225 Make Everest , Motor Pulley for CPU Blower Model No.M5225 Make Everest , Discharge Silencer for CPU Blower Model No.M5225 Make Everest , Anti Vibration Pad for CPU Blower Model No.M5225 Make Everest Total Quantity : 100
Contract Date: Ref. Documents Contract Value : ₹ 22.62 Lakh
Boards / Undertakings / PSU No of Bidders 1
Uttar Pradesh View Result →
7.
Defence #11245043 AOC
Bids Are invited for Anti Vibration Mounting Pad (Q3) Total Quantity : 6
Contract Date: Ref. Documents Contract Value : ₹ 11,250
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
8.
Railways #11239495 AOC
Supply Of Anti Vibration Mounting Pad (Cusy Foot) B Series With Cast Steel Top, 5/8 Inch Tappered Hole 5/8 Inch X 50Mm Long Ht Bolt With Spring Washer, Conf. To Rdso Spec No. Rdso/Pe/Spe/Ac/0084- 2008 (Rev-1), Suitable For D.G. Set Base Frame Of Rajdhani/Shatabdi High Capacity Power Cars.Anti Vibration Mounting Pad (Cusy Foot) B Series With Cast Steel Top, 5/8 Inch Tappered Hole 5/8 Inch X 50Mm Long Ht Bolt With Spring Washer, Conf. To Rdso Spec No. Rdso/Pe/Spe/Ac/0084- 2008 (Rev-1), Suitable For D.G. Set Base Frame Of Rajdhani/Shatabdi High Capacity Power Cars.,Anti Vibration Mounting Pad (Cusy Foot) B Series With Cast Steel Top, 5/8 Inch Tappered Hole 5/8 Inch X 50Mm Long Ht Bolt With Spring Washer, Conf. To Rdso Spec No. Rdso/Pe/Spe/Ac/0084- 2008 (Rev-1), Suitable For D.G. Set Base Frame Of Rajdhani/Shatabdi High Capacity Power Cars. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]
Contract Date: Jun 08, 2026 Contract Value : ₹ 27.48 Lakh
Government Departments No of Bidders 1
Haryana View Result →
9.
Defence #11192596 AOC
Tender For Provn Of Central Mi Room At Nimu; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 43 2 Lump sum price worked out by the contractor for (SITE CLEARANCE, EXCAVATION & EARTH WORK)as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 44 3 Lump sum price worked out by the contractor for (INTERNAL ELECTRIFICATION)as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 50 4 Lump sum price worked out by the contractor for (INTERNAL WATER SUPPLY)as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 52 5 Lump sum price worked out by the contractor for (ROAD, PATH & HARDSTANDING)as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 54 6 Lump sum price worked out by the contractor for (SEWAGE DISPOSAL)as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 55 7 Lump sum price worked out by the contractor for (AREA DRAINAGE)as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 56 8 Lump sum price worked out by the contractor for (SHED FOR DG SET)as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 58 9 Lump sum price worked out by the contractor for (HOT WATER SUPPLY)as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 59 10 Lump sum price worked out by the contractor for (EXTERNAL ELECTRIFICATION)as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 65 11 Lump sum price worked out by the contractor for (EXTERNAL WATER SUPPLY)as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 66 12 SCH A PART - XII (MISC B/R & E/M ITEMS) (REFER BOQ)Note: This schedule is not pre-priced by MES and the rate indicated as Rs 0.00 under Col 5 signifies this fact only 13 INTERNAL ELECTRIFICATIONS&F Double door three phase prewired distribution board vertical DB VTPN 8 way with acrylic door made out of CRCA sheets 1.6 mm thick,phosphatised powder coated with copper Bus Bar 200 Amps, 415 V,IP 43/IK09, Earth Stud, Din Rail, Polymide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box ,ground terminal blocks ,duly prewired with thimbled flame retardant copper conductors and poly layer for protection in and includingMCCB4 pole 63 Amp rating repturing capacity 16 KA.(Note:- Single Phase MCBs are to be measured and paid for seperately) 14 S&F LED building security light, pressure die cast aluminum housing, 20/25 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 5 mtr from groundwith MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge.NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate. 15 S&F new wall mounted fan of approved make and type complete all as specified and as directed. 16 S&F TV Co-axial socket 1 module, complete all as specified and as directed. 17 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps 18 INTERNAL WATER SUPPLYS&F single piece Vitreous china wash down water closet pan Pedestal Pattern white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flushing system , pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as spd & directed complete all as specified and directed by Engr-in charge.. 19 S&F CP Grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) dia of outlet is 100 mm complete all as specified and directed by Engr-in charge. 20 S&F hand shower (health faucet ) with 8mm dia and 1 meter long CP flexible tube and wall hookcomplete all as specified Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge 21 S&F Soap dish (S/S), any type, fixed to plugs with chromium plated brass screws, all as specified and directed by Engr-in charge. 22 ROAD, PATH & HARD STANDINGM&L for wet mix macadam (WMM) for 150mm thick (compacted thickness) laid in two layers of 75mm each grading as per table 400-13 of MoRTH (Ministry of Road Transport & Highways) specification of Road and Bridge works 2013. Manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and conslidating required gradient and camber. The finished surface tolerance to be as per table 900-1 of MoRTH specification for road and bridge works 2013 complete all as specified and directed by Engr-in-Charge. 23 M&L for applying thermoplastic paint marking 2.5mm thick centerline ,stop line,dashes,arrows etc and n exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint ofapproved colour confirming to BS 3262-1989 with special applicater machine all as per manufacturers instructionof any colour on road surfaceincluding cleaning with gunny bags removing all loose dirt/dust complete all as specified and directed. 24 M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users. 25 M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3M Dia and 3 M Depth. 26 EXTERNAL ELECTRIC SUPPLYS&F Polycarbonate junction boxes IP 65 protection of size 0.200 x 0.250 x 0.155 m complete with 1 Nos MCB SP 2.5 Amp & 4 way industrial connector including clamp made out of MS flat 30x5mm connection from junction box to street light fitting with three single core PVC insulated, PVC sheathed wire 2.5 Sqmm copper & PVC conduit 20 mm dia complete all as specified and directed by Engr-in-charge. 27 Excavation in trenches by cutting of road crossing/PCC hard standing, under boundary wallfor laying of pipe/cable including making good the existing surface with same finish to match the original finish complete all as specified and directed by Engr-in-charge. 28 S&FHT/LT MS cable route indicator 4 dia fixed with two Nos of nut, bolt and washers and provision of PCC 1 : 4 : 8 type D-2 using 40 mm grade stone aggregate of not less than 0.018 cum in each at base buried under the groundincl necessary earth work complete all as specified and directed by Engr-in-charge. 29 Supply, installation, testing and commissinoning LT panel board suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz indoortype, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 2 mm thick CRCA sheetduly powder coated and shall be CPRI Approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, cable alleys, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, glands, AI bus bar duly covered with heat shrink sleeves colour coaded duly fixed onDMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length, incoming and outgoing MCCBs shall have extended bus bar links and mounted on 50x50x5mm sizeMS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate ) in foundation design subject to approved of AGE (I) Nimu to sent the site requirementcomplete all as specified and directed including comprising of following :- 30 (a) MCCB 400 Amps, FP, 36 KA, 415 volts, 50Hz - 01 No (I/C)(b) MCCB 200 Amps, FP, 25 KA, 415 volts, 50Hz - 02 No ( CHS)(c) MCCB 125 Amps, FP, 16 KA, 415 volts, 50Hz - 04 Nos (APFC, TPN DB -02, Spare )(d) MCB SPN 40 Amps, 10 KA, 220 volts, 50Hz - 03 Nos (Garage,Street light, Spare-1)(e) On load Chengeover 400 Amps 4 pole -01 No (f)Digital voltmeter, with VSS - 01set(g) Digital Ammeter, with CTs & ASS - 01 set(h) LED phase indication lamps RYB - 01 set(j)Single phase Rotary Automatic Light controller Nature switch with voltage range 120-440V,AC,20 Amps,IP-65,50HZ-01 Nos(k) Copper bus bar TPN 600 Amps rating - 01 set 31 Labour for boring underground upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified. 32 EXTERNAL WATER SUPPLYM&Lfor cutting existing GI pipes and insertion of new Tee branches of suitable size to take branch connection of 50mm dia PP-R.Note : Suitable size of Tee branch is deemed to be included in the quoted rate. 33 Construction of stone masonary valve pit chamber of size 90cm x 90 cm x 90 cm (internal dimension) including all necessary excavation and earthwork in hard / dense soil and disposal of surplus soil to a distance not exceeding 50 meters & deposting the same as directed includingPCC in foundation of the mixture (1:4:8) D-2 stone masonary in cement motor 1:4 rendering 15mm thick in cement mortar 1:4 internally finished even and fair and pointing flush externally as the work proceeds in the same mortar as of stone masonary including mild steelframe (made out ofangle in 40x40x6mm) MS steel cover 3.15 mm thick with handle and locking arrangement with ginges angle iron flat as requiredat site including painting of all posed MS work with two coat of synthetic enamel paint over a coat of red oxide primer and painting all the steel surfaces embedded in PCC with two coats of black bituminuos paint andall other relevant work complete . 34 M&L for providing tracer/anti freezing cable of capacity 20W/m required to keep the pipe warm upto avoiding freezing all as specified including electrical wiring cable for connection of suitable size 35 (CENTRAL HEATING SYSTEM)Electric Hot Water Generator : Supply, installation, testing and commissioning ofpackage type electric Hot Water generator constructed out of MS sheet having top open-able cover for easy access and removal of heaters. The HWG shall be suitable for indoor mounting. The generator shall be provided with 50mm thick fibre glass insulation 32 kg density finished with 0.8mm / 22G aluminium cladding sheet. The generator shall have electrical capacity of 50 kW. The heater shall be electrical resistance type, copper tube with chromium plating. The generator shall be complete with float valve, pressure gauge with ball valve, master and bank thermostats, etc. The generator shall be suitable for 3 phase, 415+ 10% Volts, 50 Hz. AC supply. The generator shall complete with self-contained incoming isolation, ammeter, voltmeter, contactors for heater banks in three steps complete with manual/auto rotary switches. 36 Notes:- (i) Allneccassary accessories required for the proper fucntioning of Hot Water Genearator are included in price.(ii) The prices should include lifting, shifting and positioning of units at Site.(iii) Hot Water Genearator installation to done as per Manufacturer recommendation with all installation requirements i.e Foundation, Vibration Isolator,Insulationetc as recommended by Manufacturer for the Ambient Temperature of Site. ODU installation is included in ODU price which includes the Civil Struture, Mechanical Structureetc as recommended byManufacturer.(iv) The Contractor/OEM will shall submit the Hot Water Generator capacity/Burner Capacity conforming to relevant IS Code(v) OEM should submit the Installation and Maintenance Schedule/ Manual for the Boiler. 37 GLYCOL CIRCULATION CENTRIFUGAL PUMPS: Supply, Installation, Testing & Commissioning of PN16 ratedAxial Split Coupled Vertical Inline water pump set with CI casing, Bronze Impeller, SS Shaft and externally flushed outside type balanced mechanical seal and non overloading motor, as per specifications and drawings. with Suitable HP, TEFC squirrel cage induction motor with IE3 type class F insulation, Motor shall be rating of IP 55, operating on 415 ±10% volts, 3 phase, 50Hz AC Supply. The external flush line must be used for the purpose of heat dissipation from the mechanical seal.Pumps with performance characteristics as given below:The internal components of pumps including mechanical seal shall be suitable to sustain a fluid temperature of -25 Degree Celcius to 120 Degree Celcius. Vendor shall be provide antivibration arrangement for pumps . 38 The scope also shall include following below mentioned:(i) Electrical by pass starter for pump setas recommended by OEM. (ii) 25 mm thick polyviny nitrile rubber insulation duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump.(iii) Pressure gauges 150 mm dia -03 Nos (iv) Mounting frame with antivibration pads (In case pumps are inline, anti vibration system shall be as per Manufacturers recommendation) (v) RCC/Cement concrete foundation for the pump unit. (In case pumps are inline, foundation shall be as per Manufacturers recommendation).Pump capacity are as under:Capacityand pump headnot less than flow 25 USGPM , Head 20 mtr (Refernce Model No. : Armstrong : Series 4300 - 40-150 - 2p - 1.5 kW) each including the Triple duty valve and End Suction guide. 39 EXPANSION TANK and Pressurisation Unit:Supply, Installation, Testing and commissioning of INSULATED PRESSURISED CLOSED WATER EXPANSION TANK suitable for total volume ofGlycol - Water Solution, circuit along with necessary accessories such as along with necessary accessories such as 2 Nos pumps (1working +1standby) with Pressure Transmitter andinterconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc.with Pressure Transmitter andinterconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc. The tank shall be pre-charged. Expansion tank Shall be with replaceable heavy duty butyl rubber bladder. The tankconnections should be as per OEM recommendationsand 20 mm drain and charging valve connection to facilitate the on site charging of nitrogen in the tank.The tank shall be fitted with lifting rings and a floor mounting skirt for vertical installation. The tank must be constructed in accordance with IS-STANDARD 2825-1969 (withlates Revision)and Rated at PN 16 . The complete system shall be sourced from single manufacturer and supplied and installed with all accessories and safety fixtures required for proper functioning of the complete hydronic system.The tank shall be duly painted in approved colour shall be complete with pressure switches and power distribution and control panelIP55 Control Panel, Pressure Transmitter, interconnecting piping & wiring. (Tank capacity 500 Ltrs). Hot Glycol - Water closed vessel pressurized expansion tank as described above shall be duly Insulated with 50 mm thick PUF/Nitrile Rubber insulating material or Equivalent U valueInsulating Material and cladded with aluminium Sheet (20G). Electrical by pass starter for pump setas recommended by OEM. 40 Expansion Tank of 500 Lts capacity 41 PRESSURIZATION UNIT: for Pump Set -03 Nos with Control Panel and accessories. 42 Make Up TANK: Supply, installation, testing and commissioning of factory made Make up Water Tank, Rectangular/Circular shape, of 4 mm thick MS sheet (IS 2062), of capacity of 550 litres complete with inlet, outlet, overflow, drain pipe of MS and vent with flame arrestor. Tank will be provided with supports made out of minimum 50mm angle iron duly painted, to keep tank base at minimum (1000mm) above FFL. Service platform shall be provided as per recommendations of OEM. The tank shall be provided with remote indication of levels provided level switches for on-off operation of tranfer pump. Extra high level and extra low level alarm shall be provided. Tank and structure shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.Make up Water tank as describedabove should beduly Insulated with 50 mm thick PUF/Nitrile Rubber insulating material and cladded with aluminium Sheet (20G). 43 Supply, Installation, Testing and Commissioning ofSteel plate Radiator( Wall Mounted) confirming EN- 442 , working pressurerange from 10-13 bar having workinh temparture of 110°C, complete with top grill side cover as standard along with inlet ,outlet valve, Air purge valve andwith threaded plug, flow regulator as per OEM.The below desired capacity should be calculated at Altitude of 3600 mts above sea level. Capacity calculation sheet to be provided to Engineer in Charge. The below mentioned capacity is at INLET TEMP: 75 Degree Celcius , OUTLET TEMP: 65 Degree Celcius. Referemcwe Model Series. 44 1.5 kW, Type: 33- DKEK, Length is 1000 mm and Height is 600 mm of Radiator. 45 2.5 kW, Type: 33- DKEK, Length is 1000 mm and Height is 600 mm of Radiator. 46 3.5 kW,Type: 33- DKEK, Length is 1600 mm and Height is 600 mm of Radiator. 47 5 kW,Type: 33- DKEK, Length is 1600 mm and Height is 900 mm of Radiator. 48 5 kW,Type: 33- DKEK, Length is 2000 mm and Height is 600 mm of Radiator 49 M & L for Pre-insulated MS pipe,Class C havingminimum thicknes of PUF insulation as mentioned below and of density 36 Kg/Cum and 26 gauge AL cladding complete suitable for above ground as per sizes shown.The pipes should be insulated with closed cell puf of density 36±2 Kg/Cum of below mentioned thickness. The Pipe should be workable in the temp. range of-50 Degree Celciusto120 Degreec Celcius. Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 50 80 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 51 65 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 52 50 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 53 40 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 54 20 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 55 Buried under ground/Exposed to Ambient:80 mm with 50 mm PUF thicknes and HDPE Cladding, 26 Gauge Al Cladding. 56 Cabel Tray :-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/Ground/wall with M.S. suspenders as per IS code including bolts & nuts, painting suspenders etc. as required of size 150 mm width X 50 mm depth X 1.6 mm thickness 57 Supplying, fixing, testing and commissioning of following diameter valves (PN-16 Rating) (Complete with Flanges integral or welded, fittings, Nuts, Bolts & Gaskets (PN-16 Rating), strainers (Complete with flanges integral or welded, fittings, Nuts, Bolts & Gaskets (PN-16 Rating), gauges etc for condenser water circulation as per specifications. Insulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as specified. Butterfly Valve ( Insulated Valves) with CI body SS disc nitrile sheet & O ring, Complete with fittings, Nuts, Bolts & Gaskets.Butterfly Valve ( Insulated Valves) with CI body SS disc nitrile sheet & O ring, Complete with fittings, Nuts, Bolts & Gaskets. 58 80 mm dia Butterfly Valve 59 65 mm dia Butterfly Valve 60 50 mm dia Butterfly Valve 61 Supplying, fixing, testing and commissioning of Y-STRAINER (Insulated Valves) of Ductile CI Body flanged ends with stainless steel strainer forhot water circulation including Insulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as specified of size 50 mm dia Y strainer. 62 Supplying, fixing, testing and commissioning of NON - RETURN VALVE (Insulated Valves) with duel plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating forhot water circulation includingInsulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as sepcified of size 50 mm dia NRV. 63 Supplying, fixing, testing and commissioning of Automatic Air Purge Valves forhot water circulation headeras specified of size Automtic Air Purge Valve 20 mm dia. 64 Supplying, fixing, testing and commissioning of Air Separator compleate allas specified of size 50 mm dia. 65 Supplying, fixing, testing and commissioning of water pressure gauge (100 mm dia) bourdon type with brass ball valve of 3/8 dia and SS tubing, socket.Range (0-50) / (0-100) as required by Engineer In Charge. 66 Supplying, fixing, testing and commissioning of Mercury in glass industrial thermometer in SS-304 casing with 0.5 C least count, range 0-50 C. Brass oil filled thermowell of 1/2 size as required by Engineer In Charge. 67 Electrical distribution Panel Supply, installation, commissioning and testing of factory made, CHS Plant, indoor type made out of CRCA sheet 2 mm thick, frame factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated painting having thickness not less than 100 microns provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system, floor mounted and grounting the legs of panel in PCC foundation 1:4:8 complete as all directed suitable for and including the following :- 68 INCOMERS(i) Bus Bar TPN Al extensible type main bus bars of minimum of 600 A capacity (As per capacity of corresponding incoming / Bus couplers) , and auxilliary bus bars ofsuitable capacity with heat shrunk coloured sleeves and i/c SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of50kA .(ii)MCCB 400 Amps, 415 Volt, 36 KA, 4 Pole,Microprocessor release- 01 No for incoming (Extended Rotary Operating Handle, Phase Spreader links and Phase barriers ) Make: Legrand/Schenider/SimensOUTGOINGS(i) 3Nos- 125A ,25 KA TPNMCCB/ACBwith Microprocessor release (3# Hot Water Generator)(ii) MCB 10 Amp,TPN,10KA, C curve - 06, 3 Nos for Pumps , 2 Nos for Pumps ,01 Nos for glycol transfer pump(iii) LED Phase indication lamps (01 Set) with 2Amp back up MCB,Breaker ON/OFF indicating light with 2A MCB, test terminal block set, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required. - 2 Set (iv) Digital Ammeter with in built ASS,metering C.T.sCAST RESIN type, 15VA, and accuracy class-1of 800/5A for measuring current in each phase - 01 Set.(v) All accessories prewired with appropriate size copper strip or wire and thimbles etc. all as required including foundations as per Manufacturers recommendations all as directed by Engnr-in-Charge.Note : Contractor will submit the drawing for approval of panel to GE before execution. 69 LT CABLES : Supply & Laying/ fixing of following size XLPE insulated and PVC sheathed AI conductor armoured cable/unarmoured as required of 1.1 KV grade complete as require (ISI Marked) (in ground/in pipe/in duct/on surface/on cable tray)Note for 49.01 to 49.04 :- Cable shal withstand temperature variation (-) 35 °C to (+) 35 °C at appx 3500 mtr above sea level. 70 3.5 Core x 70 sq.mm. (Electric Hot Water Generator) 71 4.0 Core x 10 sq.mm. (Pump) and (Pressurization Unit) 72 2 Core x 10 sq.mm. (Pump) 73 2 Core x 6 sq.mm (Pressurization Unit) 74 Earthing complete with Copperearth plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including Copper strip of size 32x6 mm up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of brass and protected by light grade 40mm dia upto 7.5 mtr long GI pipe connected to main controlboard and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing making test point and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified & directed by Engr-in-charge 75 S&F rubber matting conforming to IS-15652-2006 complete as required. of size2m x 1m x 25 mm 76 Glycol - Water SolutionSupplying of Ethylene glycol concentrate along with the necessary additives and inhibitor in cognition in sealed barrels complete all as directed.NOTE;- (i) The glycol concentrate shall be mixed with potable water supplied by contractor and filled in central heating system pipe line after proper leak test of entire circuit. The glycol water mixture ratio shall be 45 : 55 and freezing temperature shall be - 45 Degree Celcius (ii) First charge of glycol is included in the quoted rate. First Charge Include Charge in CHS pipe lineStorage Tank. (Glycol 45 % ,Water 55 %) 77 For CHS 78 Supply of Gycol for running of Plant for 12 months 79 GLYCOL CIRCULATING PUMP: Supply, Erection, Testing and Commissioning ofTransfer pumps for the capacity of 5 LPM 5 meter head for Glycol Fluidtransfer with base frame foundation, bolts coupling coupling guard,TEFC, (OEM design HP for the required Flowand Head ) andother accessories for proper function of the pump. 80 OXYGEN GAS MANIFOLD : Supply , installation , testing and commission 4+4 oxygen manifold with middle frame, tail pipe, NRV and ESSAB make 10x14 regulator complete all as specified and directed by Engr in charge . 81 Supply, installation , testing and commission 3 cylinder emergency inlet for oxygen complete all as specified and directed by Engr in charge . 82 Supply , installation , testing and commission automatic control panel with Analog Display 02 for oxygen complete all as specified and directed by Engr in charge. 83 S&F of copper tubing of size 15 mm OD, EN -13348 Grade , 0.9 mm wall thickness including proper saddling , clamping and insertion of branches connections including all fitting for medical use, complete all as specified and directed by Engr in charge. 84 S&F of copper tubing of size 12 mm OD, EN -13348 Grade , 0.9 mm wall thickness including proper saddling , clamping and insertion of branches connections including all fitting for medical use, complete all as specified and directed by Engr in charge. 85 S&F BS type gas outle with probe for oxygen for medical compleate all as specified and directed by Engr in charge 86 S&F 1/2 Brass ball valve with end fittings including all fittings for medical usecomplete all as specified and directed by Engr in charge. 87 S&F BPC flow meter (0-15 LPM) including humidfire bottle complete all as specified and directed by Engr in charge . 88 S&F 3/8 Brass ball valveincluding all fittings for complete all as specified and directed by Engr in charge. 89 STAND BY DG SET : Supply,install, test and commissioning of silent Diesel Engine Generating set 415 volts, 3 phase, 4 wireengine as per IS08528 conforming to CPCB Norms IV, and alternator as per IS08528 of capacity 400 KVA at NTP with control panel having meters, sound proof canopy etc with foundation (As per OEM design) including all accessories as per manufactures standard and as per the details given below and independent relay panel for automatic on mains failure:- AC Generator should be suitable for ambient conditions at nimu Leh area. 90 (A) Alternator : Standard design alternator rated at 400 KVA (320KW)net output at power factor 0.8, AC, 3 phase 4 wire, 415 V, 50 Cycles/Second, 1500 RPM self excited, self regulated, screen protected, drip proof IP 23 enclosure, brush less design, voltage regulation ± 2.5 % rated voltage from no load to full load and frequency regulation within ± 1.5 % tolerence. (B)DIESEL ENGINE : Vertical diesel engine of suitable capacity, closed circuit as per BS-649 or IS-1002 direct injection type, Electric starting system having rated speed 1500 RPM. The DG set Shall be capable for running with 10% over loading for 01 hour in every 12 hours as perBS-5514/BS-649. Engine shall be multi cylinder, multi stroke, direct injection andequipped with all standard fitting as per manufactures recommendations and mounted on common base frame with following Specifications.(a) Fly wheel with housing (i) Common base frame of sturdy design suitable for anti vibration mounting and permanent concrete foundation for mounting engine and alternator as per manufacturers instructions (b) Cooling system (i) Radiator with fan & belts & guard, rubber hoses and thermostat. (ii) Cooling water pump centrifugal type . 91 (c) GOVERNER : Electronic Governer (d) ELECTRIC STARTING SYSTEM : Electric Self starter , 24 volts DC(12 volt, 150 AH battery 2 Nos)charging alternatoraspermanufacturers design,copper leads with lugs of adequate size complete with initial charging of maintenance free battery 2X12 volt 150 AH capacity. (e) GENERATOR MONITORING PANEL : Comprising of following :- (i) Microprocessor based genset controller for metering, monitoring, governing and protection. (ii) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) (iii) Alternator protection parameters like under voltage, over current, under frequency, over frequency (alarm & shut down) (f) ACCESSORIES:AVM Pads built or separately mounted to manufacturer base frames. (g) COUPLING ARRANGEMENTS: Fixed coupling, flywheel to suit fixed coupling and fly wheel housing.(h) EXHAUST SYSTEM : should have equipped with emission control device as per latest Govt norms. Silencer complete with exhaust pipe of suitable size upto and out side the building all covered with asbestos rope of suitable size all as specified and as directed.(j) FUEL TANK: Daily service fuel tank of capacity suitable for 8 hours continuous operation made out of 3 mm thick (heat retardant) sheet with indicating gauge, built inside the acoustic enclosures or as per manufacturers design 92 (C)ACOUSTIC ENCLOSURE : All as per CPCB norms IV and OEM of DG Sets design.(D)AMF Panel : Supply, install, testing and commissioning of AMF Panel outdoor type, cubical body,dust and vermin proofmade up of CRCA sheet painted with two coats of synthetic enamelled paint over a coat of red oxide primer confirming to IP 45 with front and rear opening with louvers andmounted on floor with PCC pedestal pillars with a clearance of atleast 0.3 m above ground level with glands sockets etc with provision of cable entry from bottom all pre wired and connected complete with following accessories:-(i) Microprocessor based Panel -01 No(ii) Power Contactor heavy duty suitable for generator and mains (iii) Over load relay for genset (iv) Suitable rating isolating switch MCCB for both DG & main supply.(v) Multi functioning meter to indicate voltage, current, frequency, P F, KW & KWH etc (vi) Emergency stop push button.(vii)Set of indicaters : - (a)Low lube oil pressure (b) DG Set over load(viii) Push button to start, stop (ix) Mode selector switch i.e Auto/Manual/Test/ OFF.(x) Set of Instrument fuse (xi)Set of aluminium bus bar of 600 Amps capacity 3 ph, 4 Wire system (xii) Automatic battery charging unit with DC voltmeter, Ammeter and selector switch for trickle/ Boost charging.(xiii) By Pass arrangement of main supply when AMF circuit fail due to any fault with provision of suitable rating change overs and switches. 93 The following items are deemed to be included in the rate quoted for all DG sets:- (i) DHPP for testing purpose shall be supplied by the contractor without any extra cost to Department. (ii)The contractor shall arrange for artificial load (water load/Electrical load) for testing for final testing of DG Set at site and the cost is deemed to be including in above offer. (iii) Testing of sound level should carried out at the site in presence of Engineer-in-Charge(iv) One set of latest Spare part catalogue with price, exploded view of parts and users manual are deemed to be included in the quoted rate.(v) All civil works including foundation for DGSet as per manufacturers drawing/ specification, foundation for AMF panel shall deemed to be included in the quoted rate.(vi) The rate quoted is deemed to be included for initial filling of radiator coolant and lubricating oil upto level.
Contract Date: May 29, 2026 Contract Value : ₹ 5.74 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Ladakh View Result →
Bihar View Result →
11.
Power #11168099 Price Bid
Tender for Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Stay Wire 7/10 Swg , Plain Cement Concrete Pole 8.5 Mtr , Plain Cement Concrete Pole 11 Mtr , St Pole 13 M- Is 410 Sp- 72 , Stay Set 16X1800 , Acsr Dog Conductor , Acsr Weasel Conductor , A.B.Cab. L.T. (3X95)+ (1X70)+ (1X16)Sq.Mm , A.B.Cab. L.T. (3X120) , 11 Kv H.T.Xlpe Cable 3X185sq.Mm , Lt Abc 3X50+1X35+1X16 Sq.Mm , 33 Kv H.T. Xlpe Cable 3X300 Sq.Mm. , Earth Rod 2540X20 Mm , 11 Kv completion Poly. Disc Insulator 45 Kn , 11 Kv Composite Polymer Pin Insulator , 33 Kv Polymer Disc Insulator (B&S) 70 Kn , 33 Kv Composite Polymer Pin Insulator , 33 Kv Disc Fitting (B&S) Dog/Racoon 70 Kn , Ms Channel 100X50 Mm , 33 Kv Cross-Arm 100X50 Mm V-Type , Disc Fitting 45 Kn (T&C) , Gi Wire 4Mm/ 8 Swg , Gi Wire 5 Mm/6 Swg , 11 Kv G.I. X-Arm Angle 65X65x6 Mm V-Type , 33 Kv Gi Pin With Nut , M.S. Guarding Angle 1.8Mtr , 33 Kv Xlpe Cable Box 3X300 , G.I. Bracing Angle 65X65x6x2700mm , Droper Channel 100X50mm , Top Channel (125X65x65x6mm) 33 Kv Line , Stay Set Gi 20X1800 Mm , 3-Ph Distribution Box , V Type X Arm Angle , 11 Kv Vcb Outgoing , 11 Kv Cable Box O/D 3X185sq.Mm , M.S. Angle 75X75x6 Mm , M.S. Angle 65X65x6 Mm , Ms Channel 125X65 Mm , 11 Kv Ct/Pt Ctr200/5Amp , 11 Kv Metering Cubical , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , Stay Wire 7/10 Swg , Stay Set 16X1800 , Stay Set Gi 20X1800 Mm , 11 Kv completion Poly. Disc Insulator 45 Kn , M.S. Angle 65X65x6 Mm , 11 Kv Composite Polymer Pin Insulator , Ms Channel 100X50 Mm , Lt Abc 3X50+1X35+1X16 Sq.Mm , 33 Kv Polymer Disc Insulator (B&S) 70 Kn , 33 Kv Cross-Arm 100X50 Mm V-Type , 33 Kv Disc Fitting (B&S) Dog/Racoon 70 Kn , Disc Fitting 45 Kn (T&C) , 11 Kv G.I. X-Arm Angle 65X65x6 Mm V-Type , 33 Kv Gi Pin With Nut , M.S. Guarding Angle 1.8Mtr , 33 Kv Composite Polymer Pin Insulator , G.I. Bracing Angle 65X65x6x2700mm , Droper Channel 100X50mm , Top Channel (125X65x65x6mm) 33 Kv Line , Stay Set Gi 20X1800 Mm , 3-Ph Distribution Box , V Type X Arm Angle , 11 Kv Vcb Outgoing , Ms Angle 75X75x6 Mm , Ms Channel 125X65 Mm , 11 Kv Ct/Pt Ctr200/5Amp , 11 Kv Metering Cubical , Erection & Fixing Of Single Pole Structure Of Following Pole Of 11 Kv Line Along With X-Arm And Pin Insulator After Digging Of Suitable Pits Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Stone Pad, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Plain Cement Concrete Pole 8.5 Mtrs , Plain Cement Concrete Pole 11 Mtrs , St Pole 13 Mtrs , Erection Of 11Kv Double-Pole Structure After Digging Of Suitable Pits On Following Pole With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Plain Cement Concrete Pole 8.5 Mtrs , Plain Cement Concrete Pole 11 Mtrs , Erection Of 33Kv Double-Pole Structure After Digging Of Suitable Pits On St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Erection Of 33Kv Tri-Pole Structure After Digging Of Suitable Pits On St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Erection Of 33Kv Four-Pole Structure After Digging Of Suitable Pits On St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Erection & Fixing Of 33Kv St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Grouting Of Following St/Pcc Supports In cement concrete 1:3:6 (Cement, Sand & 40Mm Brick Ballast) Grouting Will Be Done In The Block Of Size (450X450)Mm X1/6Th Of Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With cement concrete 1:3:6 (Cement, Core Sand And Stone Grit) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials, As Per Direction Of Site Incharge. , Plain Cement Concrete Pole 8.5 , Plain Cement Concrete Pole 11 Mtr. Long , Stp 13 Mtrs Long , Construction Of T/F Plinth Suitable For 160/250/400 Kva T/F (Size 2X2x1.5 Mtr) After Digging Of Earth And Construction With 14 Bag Cement, Fine Sand, Coarse.Sand, Brick Ballast, 1St Class Bricks 6000, Stone Ballast (40Mm), Ms Channel 125X65mm (54 Kg), Ms Twisted Bar 20 Mm (50 Kg) & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction Of Site Incharge. (All Matreial/ Labour/ T&P Use For Construction Of Plinth Will Be Provided By Contractor) , Safe Dismantling, Loading, Transportation, Unloading, Re-Erection, Testing And Commissioning Of 25/63/100/250 Kva Distribution Transformers Of 11/0.4 Kv Rating, Including Complete Shifting From Existing Location To New Site As Per Departmental Instructions; The Scope Of Work Shall Include Disconnection Of Ht/Lt Lines, Removal And Refixing Of All Associated Technical Accessories Such As Go Switch Set, Drop Out Fuses, Lightning Arrestors, Ht/Lt Bushings, Earthing Arrangements, Breather, Conservator Connections, Oil Level Indicators, Silica Gel, Protection Devices And All Allied Fittings; Proper Handling Using Suitable Capacity Crane/Chain Pulley Block, Providing Required T&P, Skilled Labour, Safety Measures To Avoid Any Mechanical/Electrical Damage, Checking Of Transformer Oil Level And Filtration If Required, Tightening Of All Connections, Re-Alignment, Replacement Of Minor Damaged Components, And Ensuring Proper Earthing And Guarding; Including Carriage Of Transformer And Accessories On Suitable Vehicle Over All Types Of Roads, Complete Installation On Plinth/Structure, Connection With Existing Network, Testing Of Ir Value, Ratio Test And Trial Run For Satisfactory Operation, Strictly As Per Relevant Standards And Direction Of Engineer-In-Charge; The Rate Shall Be Inclusive Of All Labour, Tools & Plants, Transportation, Insurance, Loading-Unloading, And Incidental Charges Required To Complete The Work In All Respects. , 25 Kva Transformer On Double Pole , 63 Kva Transformer On Double Pole , 100 Kva Transformer On Double Pole , 250 Kva Transformer On Plinth , Complete Earthing System For 25 Kva, 63 Kva And 100 Kva Distribution Transformers, Comprising Of Supply And Installation Of Suitable Size G.I./Copper Earth Electrodes (Pipe/Rod Type Of Standard Length) Driven Or Installed In Earth Pit Of Required Dimensions, Including Excavation And Backfilling With Layers Of Charcoal/Coke And Common Salt, Watering Arrangement With G.I. Pipe And Funnel With Wire Mesh, And Construction Of Brick Masonry Chamber With Ci/Rcc Cover; Providing And Laying Of G.I. Strip/Wire Of Required Size From Transformer Body, Neutral And Lightning Arrester (If Applicable) To Earth Electrode, Including All Connections With Nuts, Bolts, Washers, Lugs And Proper Clamping, Testing Of Earth Resistance And Ensuring Value Within Permissible Limits As Per Relevant Standards; The Scope Includes All Materials Such As G.I. Pipe/Rod, G.I. Strip/Wire, Charcoal, Salt, Bricks, Cement, Sand, Ci/Rcc Cover, Etc., And All Labour, Excavation, Refilling, Watering, Transportation, Handling, Testing, And All Tools & Plants (T&P) Required For Complete And Satisfactory Installation As Per Respo/Standard Specifications And Direction Of Engineer-In-Charge. , Providing And Installation Of Maintenance-Free Chemical Earthing System For 250 Kva Distribution Transformer, Comprising Of Supply And Erection Of Approved Make Chemical Earth Electrode (Gi/Copper Bonded, Of Standard Length And Diameter) Installed In Drilled/Bored Hole Of Required Depth In All Types Of Soil, Including Backfilling With Highly Conductive Earthing Compound (Bfc/Graphite Based) To Achieve Low And Stable Earth Resistance; Providing Separate And Distinct Earthing For Transformer Body, Neutral And Lightning Arrester (If Applicable) Using Required Number Of Chemical Electrodes Interconnected Where Necessary; Construction Of Earth Pit Chamber With Brick Masonry, Plastering And Heavy Duty Ci/Rcc Cover With Provision For Watering/Inspection; Providing And Laying Of Gi Strip (E.G., 50×6 Mm) Or Suitable Copper Strip From Transformer Body, Neutral Point And La To Respective Earth Electrodes, Including All Connections With Nuts, Bolts, Washers, Lugs, Clamps And Anti-Corrosive Treatment; Testing Of Earth Resistance To Ensure Values Within Permissible Limits As Per Is/Respo Standards And Ensuring Long-Term Stability Without Frequent Maintenance; The Scope Includes Cost Of All Materials Such As Chemical Electrodes, Backfill Compound, Gi/Copper Strips, Bricks, Cement, Sand, Covers, Water, Etc., And All Labour, Drilling, Installation, Refilling, Carriage, Loading/Unloading, Handling, Testing, Commissioning And All Tools & Plants (T&P) Required For Complete And Satisfactory Execution Of Work As Per Standard Specifications And Direction Of Engineer-In-Charge. , Construction Of Safety Fencing (Ms) Size 3X3x2 Mtr. For Dist. Transformer 11/0.4 Kv Sub Station, With Supply Of Material Required For Ms Fencing (50X50x3 Mm) M.S. Wire Mesh Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Angle/T-Iron To Be Fitted On Vertical Posts. Pickets (If Required) Fitted To Rail And Gate To Facilitate Entry And Exit. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Angle 65X65x6mm. Such Post Shall Be Kept Preferably At Distance Of 800-1000 Mm. And Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. (All Matreial/ Labour/ T&P Use For Construction Of Plinth Will Be Provided By Contractor) , Providing, Installing, Testing And Commissioning Of Tailless Unit Suitable For 250 Kva Distribution Transformer, Including Dismantling Of Existing Tail Connections (If Any), Supply And Fixing Of Required Lt/Ht Connectors, Busbar Arrangements, Insulated Sleeves, And Necessary Termination Accessories; Complete Modification Of Transformer Lt Side To Tailless Configuration Ensuring Proper Phase Segregation, Insulation And Mechanical Strength; Including Providing And Fixing Of Suitable Size Aluminium/Copper Lugs, Glands, Ferrules, Heat Shrink Sleeves, Pvc Insulation Tape, Nut-Bolts, Washers And All Jointing Materials As Required; Making Proper Cable Terminations, Dressing And Clamping Of Cables With Gi Clamps; Providing And Ensuring Effective Earthing Of The Tailless Unit With Gi Strip/Wire And Connecting To Existing Earthing System; Including Painting Of Modified Portion With Suitable Anti-Corrosive Paint; Complete Testing For Continuity, Insulation Resistance And Proper Load Transfer; The Work Shall Be Carried Out As Per Relevant Is Standards, Respo/Departmental Specifications And As Directed By Engineer-In-Charge; The Rate Shall Include Cost Of All Materials, Labour, Tools & Plants (T&P), Handling, Loading/Unloading, Transportation, And All Incidental Works Required To Complete The Job In All Respects. , Providing, Laying, Jointing And Commissioning Of 140/200 Mm Dia (Od) Pn-4, Pe-80 Grade Uv Stabilized Hdpe Pipe In 6.0 Mtr Standard Length By Trenchless (Hdd/Drilling) Method For Underground Cable Protection, Including Excavation Of Suitable Size Launching And Receiving Pits, Alignment And Preparation Of Bore Path, Drilling, Reaming And Insertion/Pulling Of Hdpe Pipe, Jointing By Butt Fusion/Electrofusion With All Necessary Fittings Such As Couplers, Bends And End Caps, Ensuring Proper Alignment And Leak-Proof Joints; Including Providing And Laying Of Warning Tape, Route Markers And Identification System; Complete With All Required Tools & Plants (T&P) Such As Hdd Machine, Drilling Machine, Compressor, Generator, Welding Machine, Including All Consumables, Loading/Unloading, Handling And Safe Stacking At Site; Including Dewatering (If Required), Traffic Control, Barricading And Safety Measures; Also Including Restoration Of Road, Footpath, Drain Or Any Other Surface Under Row (Right Of Way) Conditions To Original Condition And Disposal Of Surplus Earth/Muck; Complete In All Respects As Per Relevant Is Standards, Respo/Departmental Norms And Direction Of Engineer-In-Charge, With All Material, Labour, T&P, Transportation And Incidental Charges Included In The Rate. (Rate Will Be Charge As Per Actual Length Of Work) , 200 Mm Dia For 33 Kv Line , 140 Mm Dia For 11 Kv Line , Laying Of Following Cable Undergound Into Hdpe Pipe, Spare Cable Shall Be Left In The Loop Shape At Both Ends As Per Respo/Norms, As Per Direction Of Site Incharge.(Rate Will Be Charge As Per Actual Length Of Work) , 11 Kv H.T.Xlpe Cable 3X185sq.Mm , 33 Kv H.T. Xlpe Cable 3X300 Sq.Mm. , Manually Digging Excavation Of Trench Of Size 0.50 M Width × 1.00 M Depth In All Types Of Soil Including Dressing, Levelling And Disposal Of Surplus Excavated Earth Within Specified Lead As Per Respo/Drawing Norms And Direction Of Engineer-In-Charge; Supplying And Laying Of Brick Masonry (Class Designated) In Cement Mortar For Side Protection, Providing And Filling Of Sand Cushioning At Bottom And Around The Laid Cable, Followed By Laying Of Plain Cement Concrete (Plain Cement Concrete) Of Required Grade For Base And Protective Covering Over Trench; Thereafter, Placing And Proper Alignment Of Xlpe Cable Within The Complete Trench, And Covering The Trench With Brick/Cc Slab Protection Including Backfilling With Excavated Earth In Layers, Watering, Ramming And Proper Compaction Complete In All Respects; The Scope Of Work Includes Cost Of All Labour, Materials (Bricks, Sand, Cement, Aggregates, Water Etc.), Handling, Loading/Unloading, Carriage, And All Tools & Plants (T&P) Required For Excavation, Laying And Finishing Works, With All Safety Precautions, As Per Standard Specifications And Directions Of Site In-Charge. (The Firm Will Be Fully Responsible For This Work And Taking Necessary Permission), As Per Direction Of Site Incharge (Rate Will Be Charge As Per Actual Length Of Work). , Laying And Installation Of 11 Kv Grade, 3 Core × 185 Sq.Mm Xlpe Insulated, Armoured Aluminium Conductor Cable In Underground Trench In Double Circuit Formation, Including Careful Handling, Dressing And Alignment Of Cable Along The Route As Per Respo/Drawing Norms And Direction Of Engineer-In-Charge; Laying Of Cable Over Prepared Sand Bed, Maintaining Proper Spacing Between Circuits, And Ensuring Identification And Phase Marking; Providing Extra Length Of Cable At Both Ends In Loop Formation For Future Jointing/Termination (Spare Cable To Be Left In Loop Shape At Each End) As Specified; Covering Of Cable With Sand Cushioning, Protective Bricks/Tiles/Cc Slabs And Backfilling Of Trench With Excavated Earth In Layers, Watering, Ramming And Proper Compaction Complete In All Respects; Including Supply Of All Consumables Such As Sand, Bricks, Cable Markers, Route Indicators, Etc., And All Labour, Loading/Unloading, Carriage, Handling Charges, Testing Prior To Commissioning, And All Tools & Plants (T&P) Required For Safe And Proper Execution Of Work As Per Standard Specifications And Site Instructions. , Providing & Fixing Of G.I. Pipe 6Dia Class-B Over 11Kv/33 Kv Xlpe Cable Before Mounting The Cable At Double Pole. The Work Includes Fitting Of Clamps, Sealing Of Top And Bottom Of Pipe And One End Of Pipe Is To Be Burried Under Earth About 500Mm Earch Including Mounting And Clamping The Cable On Double Pole Structure And Making Connection With Overhead Line At Both Ends, As Per Direction Of Site Incharge. , Making And Filling Of 11Kv/33Kv Cable Jointing Kit, Indoor/Outdoor Type, After Duly Plumbing And Taping Of Suitable Xlpe Cable, Providing, Fixing And Crimping Of Proper Size Good Quality Lugs, Including Cost Of Lugs And Tape Etc., As Per Respo Norms, And As Per Direction Of Site Incharge. , 11Kv Cable Jointing Kit 3X185 Sq.Mm. , 33Kv Cable Jointing Kit 3X300 Sq.Mm. , Laying , Stringing And Final Sagging Of Acsr Weasel Conductor, As Per Respo/ Drawing Norms And As Per Direction Of Site Incharge. , Laying , Stringing And Final Sagging Of Acsr Dog Conductor, As Per Respo/ Drawing Norms And As Per Direction Of Site Incharge. , Laying And Stringing Of Following Lt Aerial Bunched Cable (Abc) On St/Pcc Poles, Including Proper Hanging, Dressing And Fixing Of Cable With Necessary Clamps, Supports, Nuts & Bolts (To Be Arranged By The Contractor), Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Lifting, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Lt Aerial Bunched Cable (Abc) (3×95 + 1×70 + 1×16 Sq.Mm) , Lt Aerial Bunched Cable (Abc) (3×120 + 1×95 + 1×16 Sq.Mm) , Fabrication Of Guarding Angle Other Requisites Material For Guarding By Drawing 02Nos G.I Wire And Making Loop At Suitable Distance As Per Respo Drawing/Norms By Providing Holding Clamps, 02Nos. Eye Bolts Made Of M.S. Round Size 12Mm Dia-100Mm Long & Cross Arm Clamps Made Of M.S. Flat Of Size 50X6mm And Bolts As Per Norms Of Respo Norms, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. As Per Direction Of Site Incharge. (Only Guarding Angle & Gi Wire Will Be Provided By Department). , G.I. Wire 4Mm/ 8 Swg , G.I. Wire 5Mm/ 6 Swg , Grouting & Fixing Of Stay Set (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Stay Set (16X1800) , Stay Set Gi (20X1800) , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of Insulation Piercing Connector (Ipc) Complete In All Respects, Including Proper Installation, Tightening And Ensuring Safe And Reliable Connection, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Lt Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Dead & Clamp , Suspension Clamp , F-Bracket With Clamp , Cross Arm Holding Clamp , Providing And Fixing Of Nut & Bolts As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing And Fixing Of Lt Fuse Set Complete On 25/63/100 Kva Transformer In All Respects, Including Proper Mounting, Connection, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Eye Hook Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Stone Pad 300X300x75 Of Approved Quality And Specified Size At Pole/Support Locations, Including Excavation Of Suitable Size Pit, Preparation Of Base, Dressing, Leveling, And Proper Placement In Line And Level As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge, Including Refilling, Ramming And Consolidation To Ensure Stability; The Scope Of Work Includes Cost Of All Labour, Loading/Unloading, Carriage, Alignment And All Incidental Works Required For Complete Execution, And All Tools & Plants (T&P), Equipment And Tackles Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Danger Board Of Approved Design, Size And Material With Proper Statutory Warning Sign And Lettering, Complete With Suitable M.S. Clamp, Nuts, Bolts And Washers, To Be Rigidly Mounted On Pole/Structure At Required Height Ensuring Proper Alignment And Visibility, As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Drilling Of Holes, Fitting, Tightening, Handling, Loading/Unloading, Carriage To Site, And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Barbed Wire Of Approved Quality And Specification In Position, Stretched And Secured On Poles/Structures With Suitable Binding Wire, Staples, Clamps Or Other Approved Means, Maintaining Proper Tension, Alignment And Height As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site, Cutting, Jointing, Tightening And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Stay Insulator Of Approved Make, Type And Rating In Stay Set Assembly, Including Proper Placement Between Stay Wire Lengths, Making Necessary Connections, Tightening And Ensuring Correct Alignment And Insulation As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site, Cutting, Jointing And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of I-Bolt Of Approved Size And Quality For Guarding Angle, Complete With Nuts, Bolts, Washers And Necessary Accessories, Including Drilling Of Holes In Angle/Pole As Required, Proper Insertion, Fitting, Tightening And Ensuring Correct Alignment And Rigidity As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Number Plate Of Approved Size, Design And Material With Proper Painting/Printing Of Identification Number And Lettering, To Be Securely Mounted On Pole/Structure At Suitable Height Ensuring Proper Alignment And Visibility, As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Drilling Of Holes, Fixing With Suitable Clamps, Nuts, Bolts Or Binding Wire As Required, Handling, Loading/Unloading, Carriage To Site And All Incidental Works Necessary For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of 11 Kv Draw Out Fuse Set Of Approved Make And Rating, Complete With All Standard Accessories, Mounted On Pole/Structure With Suitable Clamps, Nuts, Bolts And Connectors, Including Proper Alignment, Tightening And Making Necessary Electrical Connections For Safe And Reliable Operation As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site, Erection, Testing And Commissioning And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment, Tackles And Testing Instruments Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of 11 Kv Smc Danger Board Of Approved Design, Size And Material With Proper Statutory Warning Sign And Lettering, Complete With Suitable Clamps, Nuts, Bolts And Washers, To Be Rigidly Mounted On Pole/Structure At Required Height Ensuring Proper Alignment And Visibility As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Drilling Of Holes, Fitting, Tightening, Handling, Loading/Unloading, Carriage To Site And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing Paint And Carrying Out Painting Of Pole With Approved Quality Paint System, Including Thorough Surface Preparation By Cleaning, Scraping, Wire Brushing And Removal Of Rust, Dirt And Loose Materials, Applying Primer Coat Where Required And Finishing With Two Or More Coats Of Approved Paint Of Specified Shade, Including Marking/Numbering If Directed, Complete In All Respects As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage Of Materials To Site And All Incidental Works Necessary For Satisfactory Completion, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Construction Of Meter Room Of Internal Size 8× 8× 10 Height, Including Setting Out, Excavation Of Foundation In All Types Of Soil, Dressing And Disposal Of Surplus Earth Within Specified Lead; Providing And Laying Plain Cement Concrete Of Required Grade For Foundation Base, Followed By Construction Of Brick Masonry In Cement Mortar Of Approved Class For Foundation And Superstructure Walls Of Required Thickness, Including All Leads And Lifts; Providing Reinforced Cement Concrete Lintel And Roof Slab (Solid Slab) Of Required Thickness Using M-20 Grade Concrete With Centering, Shuttering, Vibration And Curing Complete, Including Reinforcement Steel As Per Design; Providing Internal And External Plastering In Cement Mortar Of Required Thickness, Smooth Finishing, And Curing; Providing Flooring With Cement Concrete Or Ips Finish, Including Base Preparation And Finishing; Supplying And Fixing Of Ms/Steel Door With Frame, Including Holdfasts, Hinges, Locking Arrangement And Painting; Providing Ventilators With Ms Grill, Including Fixing; Complete Internal And External Painting/Whitewashing With Approved Quality Paint; Providing Necessary Provisions For Meter Installation Such As Cable Entry Points, Sleeves, Earthing Arrangement, Foundation Bolts And Fixtures; The Scope Includes Cost Of All Materials Such As Bricks, Cement, Sand, Aggregates, Steel, Doors, Grills, Paint, Water, Etc., And All Labour, Tools & Plants (T&P), Scaffolding, Curing, Carriage, Loading/Unloading, Handling And All Incidental Works Required For Complete Construction As Per Standard Specifications And Direction Of Engineer-In-Charge. , Laying Of Power/Control Cable Of Specified Size In Trench/Duct/On Surface Along Approved Route, Including Excavation Of Trench, Sand Cushioning, Proper Dressing, Alignment, Clamping, Identification Tagging, Protective Covering With Bricks/Tiles (Where Required), Backfilling, Ramming, Leveling, And Disposal Of Surplus Earth; Including Handling, Shifting, Straightening, And Pulling Of Cable With Due Care To Avoid Damage And Maintain Required Bending Radius; Complete In All Respects As Per Standard Specifications And Direction Of Engineer-In-Charge, All Materials, Tools & Plants (T&P), Equipment And Tackles Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing Services For Cutting/Trimming Of Trees And Branches Interfering With Lt/Ht Electrical Lines, Including Clearance Of Vegetation For Safe Operation And Maintenance Of Lines, Complete In All Respects As Per Departmental Standards And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Machinery, Safety Arrangements, Cutting, Stacking And Disposal Of Cut Material, Protection Of Existing Utilities, Obtaining Necessary Permissions From Concerned Authorities, And All Allied Works Required For Proper Completion Of The Work As Per Directions Of The Engineer-In-Charge. , Safe Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
12.
Public Administrative Department #11166172 AOC
Bids Are Invited For Sc395050000 Spacer Sleeve , Sc395050064 Splined Shaft Trax 4X4 - Sc395050064 Splined Shaft (Trax 4X4) , Sc395050061 Oil Seal 45X62x8 - Sc395050061 Oil Seal (45X62x8) , Sc395050004 T R Brg Cup Cone Part Lm603049 11Abc - Sc395050004 T R Brg(Cup/Cone Part)Lm603049/11Abc , Sc395050006 Oil Seal68x80x9 , Sc395050005 Oil Seal72x86.2X18 10 - Sc395050005 Oil Seal72x86.2X18/10 , Sc395050003 Thrust Washer Pressure Disc - Sc395050003 Thrust Washer(Pressure Disc) , Sc395050001 Hose Turbo Out-Inter Cooler Fm2.6Cr Rfr - Sc395050001 Hose (Turbo Out-Inter Cooler) Fm2.6Cr Rfr , Sc395050002 Hose Bpts To Intake Manifold Bsvi Rfr - Sc395050002 Hose(Bpts To Intake Manifold) Bsvi Rfr , Sc395050028 Hose Bpts To Intake Manifold Bsvi Rfr - Sc395050028 Hose(Bpts To Intake Manifold)Bsvi Rfr , Sc395050024 Brake Switch , Sc395050025 Clutch Switch Bs Iii , Sc395050029 Spring For Clutch Pedal , Sc395050026 Hose For P Sensor Inlet Rfr Bsvi - Sc395050026 Hose For P Sensor Inlet(Rfr Bsvi) , Sc395050027 Hose For P Sensor Out Let Rfr Bs Vi No 27 Moc Ss 316 - Sc395050027 Hose For P Sensor Out Let(Rfr Bs Vi)No 27 Moc Ss 316 , Sc395050008 Uj Kit Uj Kit M Sona3220533 - Sc395050008 Uj Kit (Uj Kit(M Sona3220533) , Sc395050007 Wiper Blade Assly Trax Rfr - Sc395050007 Wiper Blade Assly(Trax Rfr) , Sc395050014 Wiper Arm Assly Trax Rfr - Sc395050014 Wiper Arm Assly (Trax Rfr) , Sc395050015 Led Head Lamp Rh Gfr Bsvi - Sc395050015 Led Head Lamp Rh (Gfr Bsvi) , Sc395050019 Restoring Spring For C.Pedal Gfr Bsvi - Sc395050019 Restoring Spring For C.Pedal(Gfr Bsvi) , Sc395050018 Return Hose Assly For Power Stg Grl2016 - Sc395050018 Return Hose Assly For Power Stg, (Grl2016) , Sc395050021 Suction Hose Stg Pump M16 - Sc395050021 Suction Hose (Stg Pump M16) , Sc395050017 Return Line Hose Assly P.Stg Gfr Bsvi0 - Sc395050017 Return Line Hose Assly P.Stg(Gfr Bsvi0 , Sc395050020 Oil Pressure Line Pump- T Conn Gfr Bsvi - Sc395050020 Oil Pressure Line (Pump- T Conn)Gfr Bsvi , Sc395050023 Sp.Washer For Lower Control Arm Front , Sc395050022 Sp.Washer For Lower Control Arm Rear , Sc395050009 Front Rubber Buffer , Sc395050011 Trailing Arm Rubber Bush On Chassis , Sc395050010 Trailing Arm Rubber Bush On Axle , Sc395050013 Upper Link Rubber Bush , Sc395050012 Upper Control Arm Rubber Bush , Sc395050059 Lower Control Arm Rubber Bush Front , Sc395050060 Lower Control Arm Rubber Bush Rear , Sc395050055 Anti Roll Bar Rubber Bush Front , Sc395050051 Anti Roll Bar Rubber Bush Rear , Sc395050053 Brake Hose 4X4 - Sc395050053 Brake Hose (4X4) , Sc395050069 Wahser Cup Type For Steering Bush Mtg - Sc395050069 Wahser (Cup Type For Steering Bush Mtg) , Sc395050052 Bottom Hose Radiator To Engine Bv - Sc395050052 Bottom Hose Radiator To Engine (Bv) , Sc395050063 Radiator Hose Lower Bv - Sc395050063 Radiator Hose Lower (Bv) , Sc395050068 Vehicle Speed Sensor Rear 4X2 Abs - Sc395050068 Vehicle Speed Sensor Rear (4X2) Abs , Sc395050067 Vehicle Speed Sensor Front 4X4 Abs - Sc395050067 Vehicle Speed Sensor Front (4X4) Abs , Sc395050066 Vehicle Speed Sensor Bv - Sc395050066 Vehicle Speed Sensor (Bv) , Sc395050056 Cam Nut Fml - Sc395050056 Cam Nut (Fml) , Sc395050054 Cam Bolt , Sc395050057 Engine Mounting Rubber T1 Bs-Vi , Sc395050058 Gear Box Mounting Rubber T1 2.6 Bs-Vi , Sc395050065 Spring Holder , Sc395050033 Description Hose Thermostat To Radiator Tfr Bs-Vi - Sc395050033 Description Hose(Thermostat To Radiator) (Tfr Bs-Vi) , Sc395050040 Outside Rear View Mirror Lh 4Ptmtg Gfr - Sc395050040 Outside Rear View Mirror Lh(4Ptmtg)(Gfr) , Sc395050049 Outside Rear View Mirror Rh 4Ptmtg Gfr - Sc395050049 Outside Rear View Mirror Rh(4Ptmtg)(Gfr)) , Sc395050045 Transfer Case Bellow Assemble Gfr Bs-Vi - Sc395050045 Transfer Case Bellow Assemble(Gfr Bs-Vi , Sc395050047 Power Streeing Pump Vane Pump M S Rane - Sc395050047 Power Streeing Pump(Vane Pump)M/S Rane , Sc395050034 Inner Ball Joint Assembly Lh , Sc395050041 Inner Ball Joint Assembly Rh , Sc395050038 Obj , Sc395050046 Radiater Assembly Rfr Bs-Vi - Sc395050046 Radiater Assembly(Rfr Bs-Vi) , Sc395050036 Lower Arm Ball Joint , Sc395050044 Ventilated Brake Disk , Sc395050070 Combination Switch Wi Variable Int Gfr - Sc395050070 Combination Switch Wi Variable Int(Gfr) , Sc395050073 Brake Booster Force Gurkha , Sc395050074 Viscous Fan Force Gurkha , Sc395050072 Gear Shifting Knob Force Gurkha , Sc395050071 Description Front Wheel Hub Force Gurkha , Sc395050075 Water Pump Assy Force Gurkha , Sc395050031 Clutch Plate Assembly , Sc395050030 Axle Oil Ll 85W90 , Sc395050048 Power Streeing Oil , Sc395050032 Dpf Assembly Spare - Sc395050032 Dpf Assembly(Spare) , Sc395050050 Rack And Pinion Steering Gear Box Assembly - Sc395050050 Rack & Pinion Steering Gear Box Assembly , Sc395050035 Lambda Sensor M S Bosch T1 Bs-Vi - Sc395050035 Lambda Sensor(M/S Bosch)T1 Bs-Vi , Sc395050037 Nox Sensor Up Streamfm2.6 Cr Bsvi , Sc395050043 Kit Lining Set-Io S Bi-29937648 - Sc395050043 Kit Lining Set-Io/S Bi-29937648) , Sc395050042 Kit Lining Set Bi-29937647 - Sc395050042 Kit Lining Set(Bi-29937647) , Sc395050090 Main Filter Td2000 Crdi Force Gurkha , Sc395050089 Pre Filter Td2000 Crdi Force Gurkha , Sc395050107 Oil Filter Assy Fleetguard Force Gurkha - Sc395050107 Oil Filter Assy(Fleetguard) Force Gurkha , Sc395050094 Rpm Sensor Bosch Td2200 Iv Edc17 Force - Sc395050094 Rpm Sensor(Bosch) Td2200 Iv Edc17 Force , Sc395050088 Thermostat Assembly Fm 2.6Cr Bsvi Cd - Sc395050088 Thermostat Assembly (Fm 2.6Cr Bsvi Cd) , Sc395050087 Vibration Damper Grl Force Gurkha , Sc395050086 Shifting Shaft 4X2 4X4 Force Gurkha - Sc395050086 Shifting Shaft (4X2/4X4)Force Gurkha , Sc395050106 Cap With Bellow Assly Force Gurkha , Sc395050085 Rubber Bellow For Driveshaft Force Gurkh , Sc395050081 Rear Door Latch Power Force Gurkha - Sc395050081 Rear Door Latch (Power) Force Gurkha , Sc395050084 Nner Handle Assy Of Cab Door Lh Gfr Force Gurkha - Sc395050084 Nner Handle Assy Of Cab Door Lh(Gfr) Force Gurkha , Sc395050083 Description Inner Handle Assy Of Cab Door Rh Gfr Force Gurkha - Sc395050083 Description Inner Handle Assy Of Cab Door Rh(Gfr) Force Gurkha , Sc395050082 Inner Handle Assy Of Rear Door Rh Tfr Force Gurkha - Sc395050082 Inner Handle Assy Of Rear Door Rh(Tfr) Force Gurkha , Sc395050091 Thermostat Valve Assembly Force Gurkha , Sc395050076 Clutch Plate Force Gurkha , Sc395050092 Concentric Slave Cylinder G-28 G.Box Force Gurkha - Sc395050092 Concentric Slave Cylinder (G-28 G.Box) Force Gurkha , Sc395050077 Engine Oil Bs6 Force Gurkha , Sc395050080 Coolant Bs6 Force Gurkha , Sc395050079 Brake Oil Force Gurkha , Sc395050078 Gear Oil Force Gurkha , Sc395050093 Front Wheel Hub Cap Force Gurkha , Sc395050101 Breather Hose Tfr Force Gurkha - Sc395050101 Breather Hose(Tfr) Force Gurkha , Sc395050100 Gear Shifting Cable Spare Force Gurkha - Sc395050100 Gear Shifting Cable (Spare) Force Gurkha , Sc395050099 Gear Selection Cable Spare Force Gurkha - Sc395050099 Gear Selection Cable (Spare) Force Gurkha , Sc395050098 Gear Shifter Assy With Cables G28 Force Gurkha - Sc395050098 Gear Shifter Assy With Cables(G28) Force Gurkha , Sc395050096 Hand Brake Cable Lh Gfr Force Gurkha - Sc395050096 Hand Brake Cable Lh(Gfr) Force Gurkha , Sc395050095 Hand Brake Cable Rh Gfr Force Gurkha - Sc395050095 Hand Brake Cable Rh(Gfr) Force Gurkha , Sc395050105 Bundytube Boost Mc2-Humc2 Gfr Bsvi Force Gurkha - Sc395050105 Bundytube(Boost Mc2-Humc2)(Gfr Bsvi) Force Gurkha , Sc395050104 Valve 2 Way Check Force Gurkha , Sc395050103 Wheel Arch Covering Front Lf Gfr Force Gurkha - Sc395050103 Wheel Arch Covering Front Lf(Gfr) Force Gurkha , Sc395050114 Plunger Joint Cover Force Gurkha , Sc395050113 Plunge Joint Vl107 Force Gurkha , Sc395050112 Upper Arm Ball Joint Assly Force Gurkha , Sc395050102 Wheel Arch Covering Front Rh Gfr Force Gurkha - Sc395050102 Wheel Arch Covering Front Rh(Gfr) Force Gurkha , Sc395050111 Assly Brake Caliper Compelet Lh Plus Rh Force Gurkha - Sc395050111 Assly Brake Caliper Compelet(Lh+Rh) Force Gurkha , Sc395050110 C.V.Joint Bell Assy Force Gurkha , Sc395050109 Bleeder Screw For Rear Brake Assly Force Gurkha , Sc395050108 Hex Bolt Force Gurkha , Sc395050115 Slotted Locking Ring M45x1.5 Force Gurkha , Sc395050116 Bundytube Boost Mc-1Humc1 Gfr Bsvi For Force Gurkha - Sc395050116 Bundytube(Boost Mc-1Humc1)(Gfr Bsvi) For Force Gurkha , Sc395040115 Brake Pad Force Traveller Bs-Iv Type Vehicle Total Quantity : 2617
Contract Date: Ref. Documents Contract Value : ₹ 37.74 Lakh
Government Departments No of Bidders 1
Tamil Nadu View Result →
Madhya Pradesh View Result →
14.
Power #11144553 Technical Bid
Tender for Supply Of Electrical Spares And Minor Stores/Hardware Items From The Original Equipment Manufacturer, Their Authorized Dealer/Local Representative Or Local Ssi Units Registered Firms/Suppliers Already In The Trade For The Year 2026-27 , Hardware Fitings And Accessories,Clamps And Connectors For Acsr /Aaac Conductor , Single Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Ultimate Tensile Strength Of (H/W) 7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Ultimate Tensile Strength Of (H/W) 7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Line Type ) , Single Suspension Hardware Fitting For Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Ultimate Tensile Strength Of (H/W) 7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Suspension Hardware Fitting For Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Ultimate Tensile Strength Of (H/W) 7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Line Type ) , Single Tension Hardware Fitting For Acsr Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg,Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550 Kg , Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Station Type ) , Single Tension Hardware Fitting For Acsr Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg,Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550 Kg , Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Line Type) , Single Tension Hardware Fitting For Acsr Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg,Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550 Kg , Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Station Type ) , Single Tension Hardware Fitting For Acsr Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg,Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550 Kg , Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Line Type) , Double Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators.,Uts Of Hardware =7000Kglikely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc.. (Station Type) , Double Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators.,Uts Of Hardware =7000Kglikely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Line Type ) , Double Suspension Hardware Fitting For Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators.,Uts Of Hardware =7000Kglikely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc.. (Station Type) , Double Suspension Hardware Fitting For Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators.,Uts Of Hardware =7000Kglikely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Line Type ) , Double Tension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Of Hardware = 9000Kg. Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Station Type) , Double Tension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Of Hardware = 9000Kg. Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc ( Line Type) , Double Tension Hardware Fitting For Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Of Hardware = 9000Kg. Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Station Type) , Double Tension Hardware Fitting For Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Of Hardware = 9000Kg. Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc ( Line Type) , Single Tension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg, Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Tension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg, Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Line Type) , Single Tension Fitting For Acsr Twin Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg, Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Tension Fitting For Acsr Twin Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg, Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Line Type) , Single Suspension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Suspension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Line Type) , Single Suspension Fitting For Acsr Twin Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Suspension Fitting For Acsr Twin Moose Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc (Line Type) , Single Suspension Hardware Fitting For Aaac Panther Conductor 37/3.15Mm Conforming To Is 2486 (Part-I) Amended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Hardware =7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Single Tension Hardware Fitting For Aaac Panther Conductor Conforming To Is 2486 (Part-I) Amended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Hardware = 9000Kg Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Double Suspension Hardware Fitting For Aaac Panther Conductor Conforming To Is 2486 (Part-I) Amended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Double Tension Hardware Fitting For Aaac Panther Conductor Conforming To Is 2486 (Part-I) Amended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 7000Kg Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Compression Type Repair Sleeve Suitable For Aaac Panther Conductor Of 37/3.15Mm Designation With Body And Keeper Made Of Aluminum Alloy For Providing Reinforcement Of Conductor With Broken/Damaged Aluminum Strands. Repair Sleeve Should Conform To Is: 2121/1981 (With Latest Amendments Up To Date) And Should Present A Smooth Surface After Compression Min Failing Load = 95% Uts Of Conductor = 7654Kg Compression Pressure = 100Tons For Al Electrical Resistance At 20Oc =75% Of Measured Resistance Of Equivalent Length Of Conductor Corona Formation Voltage = 110% Of Max Line To Ground Voltage , Compression Type Repair Sleeve Suitable For Acsr Panther Conductor Of 37/3.15Mm Designation With Body And Keeper Made Of Aluminum Alloy For Providing Reinforcement Of Conductor With Broken/Damaged Aluminum Strands. Repair Sleeve Should Conform To Is: 2121/1981 (With Latest Amendments Up To Date) And Should Present A Smooth Surface After Compression Min Failing Load = 95% Uts Of Conductor = 7654Kg Compression Pressure = 100Tons For Al Electrical Resistance At 20Oc =75% Of Measured Resistance Of Equivalent Length Of Conductor Corona Formation Voltage = 110% Of Max Line To Ground Voltage , Compression Type Repair Sleeve Suitable For Acsr Zebra/Moose Conductor Of 37/3.15Mm Designation With Body And Keeper Made Of Aluminum Alloy For Providing Reinforcement Of Conductor With Broken/Damaged Aluminum Strands. Repair Sleeve Should Conform To Is: 2121/1981 (With Latest Amendments Up To Date) And Should Present A Smooth Surface After Compression Min Failing Load = 95% Uts Of Conductor = 7654Kg Compression Pressure = 100Tons For Al Electrical Resistance At 20Oc =75% Of Measured Resistance Of Equivalent Length Of Conductor Corona Formation Voltage = 110% Of Max Line To Ground Voltage , 4R Stock Bridge Type Vibration Damper Suitable For Aaac :Panther (Of 37/3.15Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , 4R Stock Bridge Type Vibration Damper Suitable For Aaac Panther (Of 37/2.88Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , 4R Stock Bridge Type Vibration Damper Suitable For Acsr Panther (Of 37/3.15Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , 4R Stock Bridge Type Vibration Damper Suitable For Acsr Panther (Of 37/2.88Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , Mid Span Compression Joint For Acsr Panther (Of 37/3.15Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load (Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Acsr Panther (Of 37/2.88Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load (Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Aaac Panther (Of 37/3.15Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load (Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Aaac Panther (Of 37/2.88Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load (Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Acsr Zebra (Of 54/7/3.18Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load (Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Acsr Moose (Of 54/7/3.18Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load (Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve = Extruded Al Tube Of 99.5 % Purity , Inner Sleeve = High Tensile Steel, Elect Resistance At 20Oc = 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts = Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Armour Rods Helically Twisted Suitable For Acsr Panther To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Material Al/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Armour Rods Helically Twisted Suitable For Acsr Zebra To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Material Al/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Armour Rods Helically Twisted Suitable For Acsr Panther To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Material Al/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Armour Rods Helically Twisted Suitable For Aaac Panther To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Material Al/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Disc Insulator 70Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 70Kn B&S Type, Without Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 90Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 90Kn B&S Type, Without Anti Fog(Reputed Make/ Already Use In Pdd) , Disc Insulator 120Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 120Kn B&S Type, Without Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 160Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 160Kn B&S Type, Without Anti Fog (Reputed Make/ Already Use In Pdd) , Gi Nuts And Bolts Of Sorts (16Mmx35mm/ 40Mm/45Mm/50Mm & 65Mm) Heavy Duty , Gi Nuts And Bolts Of Sorts (10Mmx75mm) Heavy Duty , Gi Nuts And Bolts Of Sorts (10Mmx50mm) Heavy Duty , Gi Nuts And Bolts Of Sorts (12Mmx50mm) Heavy Duty , Aluminium Cable Tray Of Size 400 Mm X3000 Mm , Aluminium Cable Tray Of Size 300 Mm X2500 Mm , M.S. Angle Iron Of Size (45X45x5)Mm , M.S. Angle Iron Of Size (50X50x5) Mm , Steel Tor Of Dia 8Mm , 10Mm, 12Mm For Cable Ducts , Spring Washers 16Mm Heavy Duty , G. I Wire Swg No. 8/ 4.06Mm Dia , Red Oxide Enamel Paint (Asian, Nerolac/ Berger) , Al. Paint (Asian, Nerolac/ Berger) , Smoke Grey Enamel Paint (Asian, Nerolac/ Berger) , Yellow/White Paint (Asian, Nerolac/ Berger) , Cement Permier (Asian, Nerolac/ Berger) , Al. Alloy As Per Is: 617 Of 1975 Pg Clamps 3 Bolt Type Conforming To Is: 5561-1970 (Amended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor. Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 Pg Clamps 3 Bolt Type Conforming To Is: 5561-1970 (Amended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor. Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 Pg Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor. Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 T-Clamps 3 Bolt Type Conforming To Is: 5561-1970 (Amended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor. Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided , Al. Alloy As Per Is: 617 Of 1975 T- Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor.Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 T- Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor.Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Ct Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Ct Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975 Bimetallic Ct- Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther With Clamp Sutitable For 132/33Kv CtS Of Ae Mumbai, Sct Gaziabad, Bhel Vidhyut Control Andhra, Mehru Bhiwadi/ Laxmi Engg Bhopal, Jyoti.Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Ct Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Ct Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Isolator Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor With Pad Terminals Suitable For 132/33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S, Gr Power, Skipper, Bimco.Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Isolator Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etc Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Isolator Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etc Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Isolator Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etc Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Isolator Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etc Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Isolator Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etc Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Mettalic Breaker Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Breakers Of Sf 6 Type-Abb,Cgl, Siemens, Bhel/Vcb Type- S&S, Gec Alsthom, Bhel, Abb, Siemens, Megawin Etc. Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Breaker Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv Breaker Of Sf6 - Cgl, Abb, Siemens , Bhel Vcb- S&S, Gec Alstom, Bhel, Abb, Siemens, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Breaker Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 132Kv /33Kv Breaker Of Sf6 - Cgl, Abb, Siemens , Bhel Vcb- S&S, Gec Alstom, Bhel, Abb, Siemens, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Mettalic Twin Breaker Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Breakers Of Sf 6 Type-Abb,Cgl, Siemens, Bhel/Vcb Type- S&S, Gec Alsthom, Bhel, Abb, Siemens, Megawin Etc. Likely Makes: Rul, Zi, Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Twin Breaker Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv Breaker Of Sf6 - Cgl, Abb, Siemens , Bhel Vcb- S&S, Gec Alstom, Bhel, Abb, Siemens, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Twin Breaker Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 132Kv /33Kv Breaker Of Sf6 - Cgl, Abb, Siemens , Bhel Vcb- S&S, Gec Alstom, Bhel, Abb, Siemens, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv La , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv La , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv La , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Twin Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv La , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Twin Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv La , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Twin Pad Clamp (Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kv La , P.I. Clamp For Acsr Zebra Conductor , P.I. Clamp For Acsr Panther Conductor , P.I. Clamp For Acsr Moose Conductor , P.I. Clamp For Acsr Moose Conductor , Twin Bushing Clamp Acsr Moose For 132/33Kv Transformer 1200Amp Without Poles , Twin Bushing Clamp Acsr Moose For 220/132Kv Transformer 1200Amp Without Poles , Isolator Jaw 1600Amp For 33Kv Isolator , Isolator Jaw 2500Amp For 33Kv Isolator , Isolator Jaw 1600Amp For 132Kv Isolator , Isolator Jaw 2500Amp For 132Kv Isolator , 245Kv, 50C/S , 1600 Amp, 40Ka For One Second, Ac Motor Operated Horizontal Double Break, Outdoor Type 3 Pole Isolators Without Earthing Blades , 245Kv, 50C/S , 1600 Amp, 40Ka For One Second, Ac Motor Operated Horizontal Double Break, Outdoor Type 3 Pole Isolators With One Earthing Blades , 145Kv, 50C/S , 2000 Amp, 31.5Ka For One Second, Ac Motor Operated Horizontal Double Break, Outdoor Type 3 Pole Isolators Without Earthing Blades , 145Kv, 50C/S , 2000 Amp, 31.5Ka For One Second, Ac Motor Operated Horizontal Double Break, Outdoor Type 3 Pole Isolators With One Earthing Blades , 36Kv, 50C/S , 2500 Amp, 25Ka For One Second, Ac Motor Operated Horizontal Double Break, Outdoor Type 3 Pole Isolators Without Earthing Blades , 36Kv, 50C/S , 2500 Amp, 25Ka For One Second, Ac Motor Operated Horizontal Double Break, Outdoor Type 3 Pole Isolators With One Earthing Blades , Jumpers Cone For Acsr Panther , Jumpers Cone For Acsr Zebra , Spacers For Acsr Zebra , Spacers For Acsr Moose , Spacers For Acsr Panther , Earth Wire Tension Clamp , Electrical Items And Spares , Shunt Capacitor Fuse 40A With Spring Complete Assembly , Silcagel Crystal Size 8- 8 Mesh , Silcagel Breather Box 10Kg , Aluminium Tape , Chemical Jelly , Grease , Distilled Water , Transformer Oil Sampling Bottle , Welding Electrodes Swg 8No As Per Is: 814 Of 2004 , Welding Electrodes Swg 10No As Per Is: 814 Of 2004 , Search Light With 300-500Mtr. Focus Make Flash, Equivalent Etc , Led Flood Light Complete 90/100Watt (Philips, Syska, Havells, Crompton, Bajaj Make) , Led Flood Light Complete 140/150Watt (Philips, Syska, Havells, Crompton, Bajaj Make) , Led Flood Light Complete 1900/200Watt (Philips, Syska, Havells, Crompton, Bajaj Make) , Led Street Light Fitting 190/200Watt (Philips, Syska, Havells, Crompton, Bajaj Make) , Led Lamp 9 Watt (Philips, Havells, Crompton, Bajaj/Reputed Make) , Led Lamp 15 Watt (Philips, Havells, Crompton, Bajaj /Reputed Make) , Led Lamp 18 Watt (Philips, Havells, Crompton, Bajaj /Reputed Make) , Led Lamp 45 Watt (Philips, Havells, Crompton, Bajaj/Reputed Make) , Lamp Holder Pendant/Angular (Anchor,Havells,L&T,Philips/Reputed Make) , Led Tube 4 Pin 18 Watt (Philips, Havells, Crompton, Bajaj/Reputed Make) , Mcb 5-10 annual periodical maintenance Two Pole (Havells, Anchor,Standard, Hpl) , Mcb 10-16 annual periodical maintenance Two Pole (Havells,Anchor,Standard, Hpl) , Mcb 10-16 annual periodical maintenance Four Pole(Havells,Anchor,Standard, Hpl) , Mcb 32 annual periodical maintenance Four Pole(Havells,Anchor,Standard, Hpl) , Mcb 63 annual periodical maintenance Four Pole(Havells,Anchor,Standard, Hpl) , Mccb 100 Amp, 4 Pole, Ics= 100% Icu (Havells, Standard, L&T) , Mccb 200/400/600Amp,4Pole,Ics=100% Icu(Havelles,Standard,L&T) , Main Iron Clad Switch Tpn 415V,400A , Rubber Mat 1Mtr X2mtr= 12Mm Thick , Cable Ferrules A To Z And 0 To 9 , Single Core 300Sq Mm 33Kv Heat Shrinkable Cable Kit Outdoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Single Core 300Sq Mm 33Kv Heat Shrinkable Cable Kit Indoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Copper Mesh (30Cmx5cm) , Copper Wire 8Swg , Copper Thimbles 8Mm , Copper Thimbles 10Mm , Alumunium Thimbles 2.5 / 6 Mm , Alumunium Thimbles 8 / 10 Mm , Fhelmet , Starter 36Watts , Tube Four Pin 36 Watts , Choke 36Watts , Rubberized Cork Sheet 6Mm , Rubberized Cork Sheet 10Mm , O-Rings For Bushings/Inspection Plates Of Transformer 5Mm-10Mm Diameter , Rubber Sealings For Marshalling Kiosks/Control & Relay Panels , Cooling Fans Of 3 Phase 50Mva , 33Kv Vaccum Interrupter Suitable For 33Kv Vcb Of Bhel,Abb,Gec Alstom,Seimens,Megawin, S&S Make , Thermal Overload Relay Seimens Make With Range 0.8-1.2 annual periodical maintenance , Thermal Overload Relay Seimens Make With Range 1.2A-2.5 annual periodical maintenance , Thermal Overload Relay Seimens Make Of 4A Max With Range 0.1-1Amp And 1.5A-1.2A , Mn2 Thermal Overload Relay With Start And Off/Reset Relay Of Range 0.9-1.5A L&T Make , Relay 500V,2A, Fuse 6Amp. Mn2 Make L&T , Relay 415V,3.2-5A,Class 10A Mn2 Makesiemens 3Ua50 00-1F , Relay 415V,Lth=10A,Le=4A Mn-A1 Make L&T , Dc Change Over Relay Dcco, Make Abbrxme-1-Rk221-052-Annrk711004 , Dc1 Supervision Make Abb Tsr-In352 , Anti Pumping Relay Make Schrack/Abb Or Equi , Auxillary Relay, Voltage Selection Relay 75A, Rxpsu14n-Imyn563646-Dau, Aux Voltage:110V Dc, Case Size:2S 12C, Contacts:13No+1Nc, Reset Type:Electrical, Flag:Yes, Make Abb , Auxillary Relay, Tc-1 Supervision Relay195, 7Pj1321-5Aa210aa0, Aux Voltage:24-23V Dc, Contacts:2C/O, Reset Type:Self Make Siemens , Numerical Relay, Dir. O/C & E/F Protection Relay67/67N 7Sj6611-5Eb90-1Fgo-Lor, Aux Supply:110/250V Dc, Case Size:1/3 19,16 Bi, 7 Bo,1 Life Contact,4*I, 4*U,Ct:1A, Vt:110V/220V,50Hz, Iec61850, 100 Mbit Ethernet, Electrical, Double, Rj45-Connector Make Siemens , Thermostat Make Apt/Veilco/Eq , Auxiliary Air Break Contactor Of Ac2/Ac3 Duty Cycle Number Of Poles 03, Voltage 415V, annual periodical maintenance 0-2 A, Contacts 2No+2Nc,Make Siemens , Magnetic Control Contactor Make Andrew Yule Power 44W Volt 110V Dc Ith 10A Is 13947 Iec 947 , Contactor 415V, 12Amp Lth 10Amp,Le 4Amp Mnx12 Make L&T , Contactor 415V, 12Amp Lth 10Amp,Le 4Amp Mna1 Make L&T , Contactor 415V, 20Amp 3Tf31 01-0A Make Siemens , Contactor 415V, 9Amp Lth 10Amp,Le 4Amp Mnx9 Make L&T , Auxillary Contactor 3Th3022-0B-F4, Aux Supply:110V Dc, Contacts:20O-2Nc 89Ax Make Siemens , Cooling Fans 3 Phase Motor,415V,560Watt,900Rpm,0.9Amp/1Amp(Size 600Mm) , Cooling Fans 3 Phase Motor,415V,700Watt,550Rpm,1.5Amp(Size 600Mm) , Digital Oti 90-250V Ac/Dc, Range 0-150Degree Make Precimeasure Control Banglore , Digital Wti Meter Make Precimeasure Control Banglore , Megawatt Meter , Digital Megawatt Meter, Bezel Size: 96*96Mm, 4-1/2 Digits, Aux Supply:110V Dc, Accuracy:0.5, Ctr:1200:800-400/1A Ptr:33Kv/110V Make Ae , Mvar Meter Digital Mvar Meter, Bezel Size:96*96Mm, 4-1/2 Digits, Aux Supply: 110V Dc, Accuracy:0.5, Ctr:1200-800-400/1A Ptr:33Kv/110V Make Ae , Ammeter Digital Ammeter, Bezel Size:96*96Mm, Aux Supply:110V Dc, Accuracy: 0.5, Range:1200-800-400/1A, Inbuilt Selector Switch Make Ae , Selector Control Switch Er Make 1224 Swiso , Digital Ac Ammeter,Makeae Digital 4, Range 0-600A, Ct Ratio 600/1A, Size 130X130 Mm. , Electronic Hooter, Aux. Supply 110V Dc, Freq. 48-63 Hz, O/P95-105 Db Size 96X96x82 Mm. , Lubricator Make Sae80w/90 Type Oil , Glass Sleeves , Crc Bottle , Teflon Tape , Single Core 63Sq Mm 33Kv Heat Shrinkable Cable Kit Outdoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Single Core 63Sq Mm 33Kv Heat Shrinkable Cable Kit Indoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Fan Contactor Seimens Ice 158.1 Auxiliary Contactor 2No+2Nc & 4No+ 4Nc , Seimens 3Ta6702 2 To 10A, Auxilairy Contactor 3No+2Nc,Cs3-P Iec947 En60947 V=6Kv Ac-1 690V-1A Ac-15 , Solder Flux , Single Core 300Sq Mm 33 Kv Voltage Grade,Al Conductor, Pvc Insulated, Sheathed, Armoured, Xlpe Cable Likely Make Havelles Etc , Pvc Unarmoured Copper Control Cable 2.5Mm Sq 2 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 2 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 4 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 6 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 8 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 10 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 12 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 16 Core , Pvc Copper Wire 1 Mmsq , Pvc Copper Wire 1.5 Sqmm , Pvc Copper Wire 2 Sqmm , Pvc Copper Wire 4 Sqmm , Pvc Copper Wire 6 Sqmm , Copper Glands 19/25/32Mm , Switch 5A , Switch 15A , Socket 5 Pin, 5A , Socket15 Pin, 5A , Fan Regulator 10A , Dp Switch 32A , Pvc Tape Roll , Indicating Pygmy Lamp 220V/110V Dc, Pin Type / Screw Type , Semaphore Indicator For Isolator S89a Ntc12, Aux Supply:110V Dc, With 3Kohm, 6W External Resistor Make Dav , Push-Button & Indicating Lamp For Ann. Accept 3Sb50 00-0Ab01+ 3Sb54 00-0A, Normal Actuator With Plastic Front Ring And Black Holder Contact (1N0+1Nc) , Auxillary Switch 8No+ 8Nc Make Shirka/Shubhada/Eq , Local Remote Switch Make Shirka/Switron/Kaycee , Rotary Switch, Local Remote Switch 8 Ways, Handle:Pistol Grip, Position:Local/Remote, Stay Put, (Local-4Ways, Remote-4 Ways), 25A; Lockable Type, Bezel Size:75 Sq.Mm , Limit Switch 3Se3 023-0A, Contacts:1No+2Nc Make Siemens , Control Switch Bcs 3 Position ,Pistol Grip 16 Ways Make Switron , Control Switch Bcs 3 Position ,Pistol Grip 20 Ways Make Switron , 3 Core 95 Sq Mm 11Kv Xlpe Cable , Sf-6 Gas Cylinder Of 9Kg , Sf-6 Gas Cylinder Of 11Kg , Nitrogen Cylinder Of 16Kg Containing 9Kg Gas , O2 Cylinder Refilling , Anti Rodent Device , Control Switch For Panels Reputed Make , Hrc Fuse 2Amps , Hrc Fuse 4Amps , Hrc Fuse 6Amps , Hrc Fuse 10Amps , Hrc Fuse 10Amps , Hrc Fuse 32Amps , Hrc Fuse 32Amps , Hrc Fuse 100Amps , Fuse 3Nw20nnsf+3Nwns10, Aux Voltage:110V Dc, Rating:10A Make Siemens , Fuse 3Nw20nnsf+3Nwns4, Aux Voltage:110V Dc, Rating:10A Make Siemens , 33Kv Phase Limb Of 33Kv Circuit Breaker (Abb Make) , Breather Box For 133.33 Mva/160 Mva/150Mva, 220/132 Kv Transformer (Bhel/Abb Make) , Breather Box For 50 Mva,132/33 Kv Power Transformer (Bhel/Cgl/Ece/Emco Make) , Numerical O/C And E/F Relay Make:Easun Reyrolle , Model: Mit 114,Poles:4No,Volt: 43-280V Dc,Amp:1A , Numerical Differential Relay For Power Transformer Protection Make Ashida,Er/Reputed Make , Master Trip Relay B24,110/125 V Dc Make Er/Reputed , Master Trip Relay B24,220 V Dc Make Er/Reputed , Master Trip Relay 86, Rxmvb2-1Myn563035-Ad Make Abb , Trip Relay Supervision Relay 95 Tsr-1N352-001-As, Make Abb , 33Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt :33Kv/√3/110V/√3 , Frequency:50Hz, Rating: -/1A,Accuracy Class: 0.2S, Standard: Is 14697, Iec 62053-22 , 66Kv Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt 66Kv/√3/110V/√3 , Frequency:50Hz, Rating: -/1A , 132 Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt 132Kv/√3/110V/√3 , Frequency:50Hz, Rating: -/1A,Accuracy Class: 0.2S, Standard: Is 14697, Iec 62053-22 , 220 Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt : 220Kv/√3/110V/√3 , Frequency:50Hz, Rating: -/1A,Accuracy Class: 0.2S, Standard: Is 14697, Iec 62053-22 , 2 Pole Heavy Duty Rotary Switch With Off 5Amp Make Key Cee Equivalent Etc For C&R Panel , Shunt Tripping/Closing Coil 110V/220V Dc, Suitable For 33Kv Vcb Of Bhel, Abb, Megawin, Alstom, Siemens, S&S, Cgl & Aluminum Industries Ltd.Make,Equivalent Make Etc , Shunt Tripping/Closing Coil 110V/220V Dc,Suitable For 66Kv Sf6 Of Bhel, Abb, Megawin, Alstom, Siemens, S&S, Cgl & Aluminum Industries Ltd.Make,Equivalent Make , Spring/Charging/Closing Coil 220V/110V Dc, Suitable For 33Kv Vcb Bhel, Abb, Megawin, Alstom, Siemens, S&S, Cgl & Aluminum Industries Ltd.Make , Shunt Tripping/Closing Coil 220V Dc(Make Jyoti) ,Suitable For 33 Vcb Of Abb Make , Shunt Tripping/Closing Coil 220V Dc(Make Jyoti) ,Suitable For 132 Sf6 Of Abb Make , Tnc Switch 110/220V Dc 4Ways , Tnc Switch 110/220V Dc 8Ways , Tnc Switch 110/220V Dc 12Ways , Vrla Battery 12V,80/160Ah Along With Charger , Space Heater Sh100w240, Rating:100W 240V Ac Make Apt Control , Resistor Unit For Master Trip Relay 86 Rxtma-1Nrk711004-Aa Make Abb , Geared Motor For 100-130V Dc/Ac 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Geared Motor For 220-250V Dc For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Geared Motor For 220-250V Ac For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Spring Charge Motor 230V Ac/Dc , 1.8A, Type Sg105, Insulation Class B, Rpm 60 For 36Kv Vcb Make Agni/Shreem/Reputed Make , Spring Charge Motor 230V Ac/Dc For 36 Kv Megawin Circuit Breaker Type Msp36 , Spring Charge Motor 230V Ac/Dc 2.5A For 132 Kv Sf6 Circuit Breaker (Siemens Make) , Auxilliary Contactor 110V Dc For 36 Kv Megawin Circuit Breaker Type Msp36 , Operating Coil 24V Dc maintenance of For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Vd4 maintenance of Opening Coil 48V Dc For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Open Coil Mo1(110V-132V Dc) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Open Coil Mo1(220-250V Dc/220V-250V Ac) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Shunt Closing Release-Mc 24V Dc For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Vd4 Mc Closing Coil(48V Ac-Dc) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mc Closing Coil(110-132V Dc) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mc Closing Coil(220-250V Dc/220-250V Ac) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mu Coil Assembly 24V Dc Undervoltage For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mu Coil Assembly 48V Ac- Dc Undervoltage For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mu Coil Assembly(110-132V Dc/110-127V Ac) Undervoltage For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Vd4 Mu Coil Assembly(220-250V Dc/220-250V Ac) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly 24Vcc Additional Trip For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly(48Vca-Vcc) Additional Trip For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly(110-127Vca/110-132Vcc) Additional Trip For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly 220-250Vca/220-250Vcc) Additional Trip For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Shock Absorber Assembly For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Acsr Zebra Conductor , Acsr Panther Conductor , Acsr Moose Conductor , El3 Drive Complete(Operating Mechanism) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Transformer Oil , Motor Operated Change Over Ac240v/Dc220v 100 annual periodical maintenance (Breaker Type) , Singhle Phase 50 C/S, Outdoor Metal Oxide Gapless Type ,30Kv(Rms) Surge Arrester Including Surge Counter/Monitor,Insulating Base Plate And All Associated Assessories Auxilliares , 33Kv Post Insulators Solid Core Type, Power Frequency Withstand Voltage 95Kvp Dry Lightning Impulse Withstand Voltage ± 170 (Kvp) , 132Kv Post Insulators Solid Core Type, Power Frequency Withstand Voltage 275Kvp Dry Lightning Impulse Withstand Voltage ± 650 (Kvp) , Single Phase 50 C/S, Outdoor Metal Oxide Gapless Type, 120Kv (Rms) Surge Arrestor Including Surge Counters/Monitors, Insulating Base All Associated Accessories, Auxiliaries. , Single Phase, 50 C/S 145Kv Current Transformers (900-600-300/1-1-1-1-1 A Or As Per Site Specifications), 31.5Ka For One Second, Rated Dynamic Current 100Ka(Peak), Class A Insulation, Burden 20 Va , Single Phase, 50 C/S 132Kv Capacitor Voltage Transformers (132/√3) Kv/ (110/√3)V, One Min Power Freq Withstand 275Kvrms , Single Phase, 50 C/S 36Kv Current Transformers (1200-600-300 /1-1-1 A Or As Per Site Specifications) , 25Ka For One Second, Rated Dynamic Current 25Ka(Peak), Class A Insulation, Burden 20 Va , Single Phase, 50 C/S Outdoor 33Kv Pt (33/√3) Kv/ (110/√3)V With Highest System Voltage36kv, One Min Power Freq Withstand 70Kvrms , Marshalling Kiosk With Kiosk Frames Mild Steel Structural Sections For Pressed And Shaped Cold-Rolled Sheet Steel, Thickness Not Less Than 2.0 Mm. Frames Shall Be Enclosed In Cold-Rolled Sheet Steel Of Thickness Not Less Than 1.6 Mm. Doors And Covers Shall Also Be Cold Rolled Sheet Steel Of Thickness Not Less Than 1.6 Mm. Complete Structures Shall Be Rigid, Self Supporting, Free From Flows, Twists And Bends. Dust And Vermin Proof Construction And Shall Be Provided With A Degree Of Protection Of Ip: 55, With Copper Bar Earthing. Finishing Paint On Panels Shall Be Of Shade 692 (Smoke Grey) Of Is: 5. The Inside Shall Be Properly Stoved. The Paint Thickness Shall Be At Least 50 Microns , Single Phase 36Kv 50 C/S, Outdoor Metal Oxide Gapless Type, 120Kv (Rms) Surge Arrestor Including Surge Counters/Monitors, Insulating Base All Associated Accessories, Auxiliaries , T&P Items And Safety Equipments , Turn Table For Acsr Panther/Zebra Conductor With Capacity Of 3Mt Made Of Mild Steel With Double Ball Bearing Likely Makes Pee, Zi, Honeywell, Burma Etc , Four Sheeve Pulley Steel Frame Forged Swivel Hookwith Capacity Of 5Mt As Per Is 8610 Pulley Material And Ball Bearing Of Gun Metal Bush With Open Type Pulley Isi Mark Suitable For 12Mm Steel Rope , Bolted Type Come Along Clamp Suitable For Aaac/Panther Conductor 37/3.15Mm With Al Alloy Clamp And Groove Inside For Conductor Gripping. Hook And Eye Bolt Of Galvanized Carbon Steel, Locking Bolts Made Of High Tensile Steel Is: 2121 Tension Limits = 2495Kg Likely Makes Pee, Zi, Honeywell, Burma Etc , Bolted Type Come Along Clamp Suitable For Aaac/Panther Conductor 37/2.88 Mm With Al Alloy Clamp And Groove Inside For Conductor Gripping. Hook And Eye Bolt Of Galvanized Carbon Steel, Locking Bolts Made Of High Tensile Steel Is: 2121 Tension Limits = 2495Kg Likely Makes Pee, Zi, Honeywell, Burma Etc , Bolted Type Come Along Clamp Suitable For Zebra Conductor 54/7/3.18Mm With Al Alloy Clamp And Groove Inside For Conductor Gripping. Hook And Eye Bolt Of Galvanized Carbon Steel, Locking Bolts Made Of High Tensile Steel Is: 2121 Tension Limits = 2495Kg Likely Makes Pee, Zi, Honeywell, Burma Etc , Bolted Type Come Along Clamp For Earth Wire Size 7/3.66Mm Groove According To Size Of Earth Wire Bolts Of High Tensile Steel Likely Makes Pee, Zi, Honeywell, Burma Etc , Snatch Galvanized Pulley Size 6 Dia Pulley On Ball Bearing/Gun Metal Bush With Swivel Hook Open Type With Side Locking Suitable For Use In Trans Line Stringing. , Al Alloy Snatch Roller Pulley Size 8Dia Pulley On Ball Bearing/Gun Metal Bush With Swivel Hook Open Type With Side Locking Suitable For Use In Trans Line Stringing Likely Makes Pee, Zi, Honeywell, Burma Etc , Snatch Roller Pulley Size 6Dia Pulley On Ball Bearing/Gun Metal Bush With Swivel Hook Open Type With Side Locking Suitable For Use In Earthwire Stringing Likely Makes Pee, Zi, Honeywell, Burma Etc , Tool Kit , D-Shackle Heavy Duty , Chain Block Pulley Heavy Duty 5 Ton , Avo Meter Likely Make Motwani, Waco, Riken Etc , Hook On Meter Likely Make Motwani, Waco, Riken Etc , Insulating Hand Gloves Make Crystal Etc Tested For 220 Kv, 132 Kv , 33Kv Level , Safety Helmet Isi Marked , Safety Belt Isi Marked , Safety Vest Isi Marked , Rain Coat Of Duck Back Make Etc , Safety Shoes Of Reputed Make Etc , Fixed Piller Drill Machine 40Mm , Polypropylene Rope ½, ¾& 1 / Garware Make , Manila Rope ¾ & 1 Dia , Steel Wire Rope Sling 16Mm Dia Isi Make 2 Mtr. Long Heavy Duty , Steel Wire Rope Sling 16Mm Dia Isi Make 5 Mtr. Long Heavy Duty , Steel Wire Rope Sling 16Mm Dia Isi Make 10 Mtr. Long Heavy Duty , Steel Wire Rope Of Dia 16 Mm , Discharge Rod Suitable (Complete With Connecting Lead & Clamp) For 220Kv Voltage Level , Discharge Rod Suitable (Complete With Connecting Lead & Clamp) For 132Kv Voltage Level , Discharge Rod Suitable (Complete With Connecting Lead & Clamp) For 33Kv Voltage Level , Hydraulic Conductor Cutter , Hydraulic Compressor Manually Operated For Jointing Aaac/Acsr Conductor With Operating Handle Pressure Gauge, Tools Accessories Kit And Weather Proof Cover For Protection. Capacity: 100 Ton, Make: Techo Scient/Reputed Make. , Hydraulic Compressor Motorised For Jointing Aaac/Acsr Conductor With Operating Handle Pressure Gauge, Tools Accessories Kit And Weather Proof Cover For Protection. Capacity: 100 Ton, Make: Techo Scient/Reputed Make. , Compressor Die Sets Suitable For Above Hydraulic Compressors , Drum Lifting Jack Mechanical 3 Ton Capacity , Single Sheeve Pulley Both Open And Close 5 Ton Capacity , Double Sheeve Pulley 5 Ton Capacity , Three Sheeve Pulley , Petrol Chain Saw Cutter , Earthing Roller , Equilizer Pulleys 10 Ton , Earth Wire Pulley , Single Sheeve Roller Aluminium, Rubberized Dia 300/400 Mm , Single Sheeve Roller Aluminium, Dia 450/600 Mm , Twin Aerial Roller, 150Mm (Rubberized) Aluminium , Twin Aerial Roller, 150Mm (Rubberized) Nylon (P.P) , Patta Clamp , Kitto Clamp , Turn Buckle Capacity 5 Ton , Joint Proctector For Various Conductors , Sagging Winch Machine 10 Ton , Single End Socks , Double End Socks , Earth Wire Socks , Power Winch Machine 5 Mt , Sag Plate , Single Pulley 150Mm Dia (Aluminiun/ P.P) , Automatic Clamp For Conductor/ Opgw , Crow Bar, 30Mm To 32 Mm , Derrick Pole, S-Type Roller , Air Compressor With Ac Single Phase Air Cooled 12 Cfm Compressor And Tank Pressure 100 Psi Make Maxair/Reputed Make , Paint Spray Gun 45Psi , Old Cotton Saree , Digital Mutltimeter (Mutli Functional Meter) , Military Grade Binocular (Reputed Make) Magnification Between 7X To 12 X And Objective Lense Diameter , Axe/Sickle , Professional Chain Saw 58Cc, 20 Inches, 3.75 Hp , Bush Cutting Machine Heavy Duty (Reputed Make) , Meggar , Earth Tester , Digital Insualtion Tester , Earth Test Field Kit , Oil Bdv Kit , Thermovision Camera Having Resolution 640*480, Wavelength 8-14Um, Thermal Sensitivity =0.05°C , Automatic Identification Lens With Manual/Electric/Automatic Focusing, Fov- 25°X19°; High Brightness Sunlight Screen, With 4X Digital Zoom, Hdmi Output, 500Million Pixels, Laser Positioning Points Displayed On The Image,With 32Gb Memory Space, Video Recording, Temp Range: -2O Degree To 650 Degree Centigrade, Having Rechargaeble Liyhium Ion Battery , Primary Injection Kit With 1000 Amperes Rating Accuracy ±0.5% Power Supply(Ac) 220V±10%·25A, 50Hz/60Hz Or 110V±10%·50A, 50Hz/60Hz Current Output (Ac) 1000A·5V Or 500A·10V Capacity 5Kva The Current Output Waveform Distortion ≤5% Dual Protection Overload Electronic Protection And Software Protection Range 0-1100A Resolution 0.1A, Accuracy 0.5%, Secondary Measurement Range 0-6A Resolution 0.001A, Accuracy 0.5%, Current Duration 1000A Range 1000A 2-3Minutes 500A 3-6Minutes 500A Range 500A 2-3Minutes Continuous Output 0-400A With Timer Range 0.0001～999.99S Resolution 0.001S Accuracy 0.2% ±2 Words Standard Standard Iec61010-1;Iec 61326-1 Communication Port Rs232 Cable Length 2X6m, 70Mm² , Cgi Sheet , Spanner Set , Fire Fighting Equipments , Refilling Of Dry Powder 10Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Dry Powder 15Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Dry Powder 25Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Dry Powder 50Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Abc Type 2Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Abc Type 5Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Abc Type 10Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Mechanical Foam Type 50 Ltrs (Make Freeze Fire/Reputed Make) , Refilling Of Co2 Type 4.5 Kg , Refilling Of Co2 Type 10 Kg , Refilling Of Co2 Type 12.2 Kg , Refilling Of Co2 Type 22.5 Kg , Hose Pipe For Dcp 10 Kg , Hose Pipe For Dcp 25 Kg , Hose Pipe For Dcp 50 Kg , Hose Pipe For Abc 2 Kg , Hose Pipe For Abc 5 Kg , Hose Pipe For Abc 10 Kg , Hose Pipe For Mechanical Foam Type 50 Ltrs. , Hose Pipe For Co2 4.5 Kg , Hose Pipe For Co2 22.5 Kg , Wheel Set For Dcp 25 Kg , Wheel Set For Dcp Co2 22.5 Kg , Wheel Set For Dcp/Mechanical Foam 50 Kg , Union Cap For Dcp 10Kg , Union Cap For Dcp 25Kg , Union Cap For Dcp 50Kg , Dry Powder Fire Extinguisher 25 Kg Trolly Mounted Filled With Bc Dry Powder Fitted With Hose Pipe/ Nozzle Is No: 10658 Used On B & C Class Of Fire Make Cease Fire,Savemax,Reputed Make , Abc Stored Pressure Multipurpose Type Fire Extinguisher 6Kg Wall Mounted Filled With Map Mono Ammonium Phosphate Powder 90% Complete With Hose Pipe/ Nozzle Is No: 14609 Used On A, B & C Class Of Fire Make Cease Fire,Savemax,Reputed Make , Abc Stored Pressure Multipurpose Typefire Extinguisher 9Kg Wall Mounted Filled With Map Mono Ammonium Phosphate Powder 90% Complete With Hose Pipe/ Nozzle Is No: 14609 Used On A, B & C Class Of Fire Make Cease Fire,Savemax,Reputed Make , Carbon Dioxidetype Fire Extinguishers Seamless 4.5 Capacity Wheel Type Fitted With Isi Marked Value, Hose/Horn Filled With Co2 Gas Applicable On Class B,C Fires Is 15683 Make Cease Fire,Savemax,Reputed Make , Mechanical Foam 50 Ltrs. Fire Extinguishertrolly Mounted Filled With Afff Concentrate Fitted With Hose Pipe/ Nozzle Is No: 13386 Used On A & B Class Of Fire Make Cease Fire,Savemax,Reputed Make
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jammu And Kashmir View Result →
15.
Railways #11106294 AOC
Supply Of anti vibration mount pad , anti vibration mount pad, part no.5018053-11mn55. make-machweld, cummins, plasser ]
Contract Date: May 18, 2026 Contract Value : ₹ 1.78 Lakh
Government Departments No of Bidders 1
Madhya Pradesh View Result →
16.
Railways #11089285 AOC
Supply Of Anti Vibration Mounting Pad (Conical Mount) As Per Sidwal Part No. Sr-075-1023 Or Similar With S.S Fixing Bolt, Hex. Head Full. Thread M12 X 100Mm, Conf. To Rdso Specn. No. Rdso/Pe/Spec/Ac/0061-2005 (Rev -1), Suitable For Lhb Type Rmpu Of Ac Coaches.Anti Vibration Mounting Pad (Conical Mount) As Per Sidwal Part No. Sr-075-1023 Or Similar With S.S Fixing Bolt, Hex. Head Full. Thread M12 X 100Mm, Conf. To Rdso Specn. No. Rdso/Pe/Spec/Ac/0061-2005 (Rev -1), Suitable For Lhb Type Rmpu Of Ac Coaches.,Anti Vibration Mounting Pad (Conical Mount) As Per Sidwal Part No. Sr-075-1023 Or Simil Ar With S.S Fixing Bolt, Hex. Head Full. Thread M12 X 100Mm, Conf. To Rdso Specn. No. Rdso/Pe/Spec/ Ac/0061-2005 (Rev -1), Suitable For Lhb Type Rmpu Of Ac Coaches. [ Warranty Period: 30 Months Aft Er The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]
Contract Date: May 14, 2026 Contract Value : ₹ 24.42 Lakh
Government Departments No of Bidders 1
Uttar Pradesh View Result →
17.
Educational and Research Institute #10970079 AOC
Tender for Supply, Assembly, Installation And Commissioning Of Anti-Corrosion Plating And Testing Centre , Process Tank , Supply Of Pp Tank Size As Per Tsc Ms Reinforcment Box Pipe 48*48*3 Mm Thickness Tank Size- L-400 * W-600 * H-900 * Thk-12Mm. (Rochlene/ Simona Germany) , Pp Barrel Made With 10 Mm Thickness Pp Sheet (Simona Make) With Self-Rotation Gear Box Motor Arrangement. Hole Dia. 2Mm. Loading Capacity 3~5 Kg. , Igbt Rectifier , Supply Of Rectifiers Having Rating 12-Volt -150 Ampere , Copper Part , Copper Pipe Dia. 25 Mm Thickness 3 Mm For Anode Bar Length- 600 Mm. , Flexible Single Core Dc Copper Cable 120 Sq.Mm For Anode And Cathode Connection Rectifier To Tank , Copper Tin Plated Thimble 120 Sq.Mm , Ss Hardware For Busbar Connection , Heater Ss And Teflon , Supply Of Ss-304 Heater For 3 Kw Rating Each Soak, Anodic With Level Sensor. , Supply Of Teflon Heater Having A Rating Of 3 Kw Each As Per Tsc With Level Sensor , Temp. Controller Box With Pt-100 Sensor, Tic, Timer And Buzzer , Filter , Pp Plate Type Filter Unit With Magnetic Pump (6,000 Capacity) , Upvc Pipeline With Valve And Fitting For Filter Pipeline , Fume Exhaust System , Supply Of Pp Frp Blower Having Capacity Of 3000 Cfm Complete With Base Frame, 5 Hp Motor, Belt, Guard And Anti-Vibration Pad. , Supply Of Ppgl Frp Scrubber Having Capacity Of 3000 Cfm Complete Pp Pump Inlet/Outlet Connection, Drain Connection With Drain Valve, Dia. - 1000 Mm, Height- 1800 Mm, Thickness - 8 Mm , Supply Of Pvc 5 Mm Thick Inlet And Outlet Ducting Having Diameter Of 250 Mm , Cooling System For Zinc Tank , Air Cooled Chilling Plant Having Capacity 1 Ton With Circulation Pump , Supply Of Titanium Cooing Coil For Acid Zinc And Acid Barrel Tank , Supply Of Ms Cooing Coil For Alkaline Zinc Plating Tank , Supply Of Ss-316 Cooing Coil For Zinc Nickel Plating Tank , Interconnecting Auto Control Pipeline Moc Upvc Chilling Plant To Cooling Coil , Titanium Basket And Anode Plate , Titanium Basket Made With 1.2 Mm Thickness Pe
Contract Date: May 16, 2026 Contract Value : ₹ 41.11 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
Gujarat View Result →
19.
Power #10889666 AOC
Bids Are invited for Supply Of Anti Vibration Pad - Supply Of Anti Vibration Pad Refer Annexure A For Detailed Information , Supply Of Flexible Hose - Supply Of Flexible Hose Refer Annexure A For Detailed Information , Supply Of Check Valve For Inline Mounting - Supply Of Check Valve For Inline Mounting Refer Annexure A For Detailed Information , Supply Of Flexible Hose - Supply Of Flexible Hose Refer Annexure A For Detailed Information , Supply Of Minimess Coupling - Supply Of Minimess Coupling Refer Annexure A For Detailed Information , Supply Of Pressure Relief Valve With Manifold Block - Supply Of Pressure Relief Valve With Manifold Block Refer Annexure A For Detailed Information , Supply Of Breather Filter - Supply Of Breather Filter Refer Annexure A For Detailed Information , Supply Of Oil Heater - Supply Of Oil Heater Refer Annexure A For Detailed Information , Supply Of Check Valve For Inline Mounting - Supply Of Check Valve For Inline Mounting Refer Annexure A For Detailed Information , Supply Of Three Way Change-Over Ball Valve - Supply Of Ball Valve Refer Annexure A For Detailed Information , Supply Of Ball Valve - Supply Of Ball Valve Refer Annexure A For Detailed Information , Supply Of High Pressure Filter Element Df On 330 - Supply Of High Pressure Filter Element Df On 330 Refer Annexure A For Detailed Information , Supply Of Check Valve For Inline Mounting - Supply Of Check Valve For Inline Mounting Refer Annexure A For Detailed Information , Supply Of Safety Shut Off Block - Supply Of Safety Shut Off Block Refer Annexure A For Detailed Information , Supply Of Needle Valve - Supply Of Needle Valve Refer Annexure A For Detailed Information , Supply Of Ball Valve - Supply Of Ball Valve Refer Annexure A For Detailed Information , Supply Of Pressure Relief Valve - Supply Of Pressure Relief Valve Refer Annexure A For Detailed Information , Supply Of Temperature Control Valve - Supply Of Temperature Control Valve Refer Annexure A For Detailed Information ,
Contract Date: Ref. Documents Contract Value : ₹ 1.02 Crore
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
20.
Heavy Industries and Public Enterprises #10869456 AOC
Bids Are Invited For Anti Vibration Mounts As Per Drawing J4b1613404001 , Na A , Na B , Na C , Na D , Anti Vibration Mounting Pad Total Quantity : 10
Contract Date: Ref. Documents Contract Value : ₹ 39,237
Government Departments No of Bidders 4
Rajasthan View Result →
21.
Housing Urban and Rular Development #10825500 Price Bid
Repairing Of Fire Downcommer And Wet Riser System At Scvr Iti Dheerpur Delhi , Repairing Of Down Comer Leakage On The Various Location Of R . C . C Etc And Repairing The Leakage Point By Cutting The R . C . C Floor & Welding To Make It Leakage Free Etc . Complete As Reqd . , Supplying , Installation , Testing And Commissioning Of Electric Driven Terrace Pump Suitable For Automatic Operation And Consisting Of Following , Complete In All Respects , As Required: ( Terrace Pump ) ( A ) Horizontal Type , Multistage , Centrifugal , Split Casing Pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft , Mechanical Confirming To Is : 1520B ) Suitable Hp Squirrel Cage Induction Motor Tefc Type Suitable For Operation On 415 Volts , 3 Phase , 50 Hz , Ac Supply With Ip55 Class Of Protection For Enclosure , Horizontal Foot Mounted Type With Class-F Insulation , Conforming To Is-325 . ( C ) M . S . Fabricated Common Base Plate , Coupling , Coupling Guard , Foundation Bolts Etc . As Required . ( D ) Suitable Cement Concrete Foundation Duly Plastered And With Anti Vibration Pads . ( Makes:- Kirloskar , Wilo , Kds ) A ) 450 Lpm At 35 M Head , Supplying And Fixing Single Headed Hydrant Valve With Instantaneous Single Headed Stainless Steel Coupling Of 63 Mm Dia With Cast Iron Wheel Isi Marked Conforming To Is 5290 ( Type -A ) With Blank Gunmetal/Stainless Steel Cap And Chain As Required : ( Lifeguard/Safeguard/Bharat/Agni/Safedge Make ) , Supplying And Fixing 63 Mm Dia , 15 M Long Rrl Hose Pipe With 63 Mm Dia Male And Female Couplings Duly Bound With Gi Wire , Rivets Etc . Conforming To Is 636 ( Type-A ) As Required : ( Safeguard/Bharat/Agni/Safedge Make ) A ) Stainless Steel ( Grade 304 ) , Supplying And Fixing Of External Hose Cabinet Of Size 900Mm X 600Mm X 500Mm Made Of 2Mm Thick Ms Sheet With 6Mm Thick Glazed Glass Doors I/C Necessary Locking Arrangement Suitable To Accommodate External Hydrant With Butterfly Valve/ Sluice Valve , 2 Nos . 15 Mtr . Long Hose Pipe , 1 No . Branch Pipe , Mounted On Wall Or Raised Bric Platform & Duly Painted With Post Office Red Externally And White Internally With Synthetic Enamel Paint Complete In All Respect , For Hydrant , Etc As Required ( For External And On Terrace ) . ( Safeguard/Bharat/Agni/Safedge Make ) , Supplying & Fixing 63 Mm Dia Gun Metal Short Branch Pipe With 20 Mm Nominal Internal Diameter Size Nozzle Conforming To Is 903 Suitable For Instantaneous Connection To Interconnect Hose Pipe Coupling As Required : Stainless Steel ( Grade 304 ) ( Safeguard/Bharat/Agni/Safedge Make ) , Supplying And Fixing First-Aid Hose Reel With Ms Construction Spray Painted In Post Office Red , Conforming To Is 884 With Upto Date Amendments , Complete With The Following As Required As Per Cpwd Specifications Part-V-2006 . ( Safeguard/Padmini/ Agni/Safedge Make ) A ) 30M . Long 20Mm ( Nominal Internal ) Dia Water Hose Thermoplastic ( Textile Reinforced ) Type-2 As Per Is:12585 B ) 20Mm ( Nominal Internal ) Dia Gun Metal Globe Valve & Nozzle . C ) Drum And Brackets For Fixing The Equipments On Wall . D ) Connections From Riser With 25 Mm Dia Stop Valve ( Gun Metal ) & M . S . Pipe , Providing , Installation , Testing And Commissioning Of Non-Return Valve Of Following Sizes Confirming To Is: 5312 Complete With Rubber Gasket , Gi Bolts , Nuts , Washers Etc . As Required : ( Makes:- Sant/Zoloto/Advance/Lifeguard ) A ) 150Mm Dia , 100 Mm Dia , 80 Mm Dia , Supplying , Fixing , Testing And Commissioning Of Butterfly Valve Of Pn 1 . 6 Rating With Bronze/Gunmetal Seat Duly Isi Marked Complete With Nuts , Bolts , Washers , Gaskets Conforming To Is 13095 Of Following Sizes As Required : ( Makes:- Sant/Zoloto/Advance/Lifeguard ) A ) 150 Mm Dia , 100 Mm Dia , 80 Mm Dia , Providing , Laying , Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 3589/Is 1239 Including Welding , Fittings Like Elbows , Tees , Flanges , Tapers , Nuts Bolts , Gaskets Etc . And Fixing The Pipe On The Wall/Ceiling With Suitable Clamp/Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : ( Make:- Jindal Hissar , Tata , Surya Parkash ) A ) 25Mm Dia . , 50 . Mm Dia . , 80Mm Dia . , 100Mm Dia . , 150Mm Dia . , Providing Laying , Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 1239/3589 I/C Fittings Like Elbows , Tees , Flanges , Tapers , Nuts Bolts , Gaskets Etc . In Ground Including Welding , Excavation & Providing Cement Concrete Blocks As Supports , Anticorrosive Treatment With Coaltar/Asphalt Tape As Per Is 10221 , Refilling The Trench Etc . Of Following Sizes Complete As Required . ( Make:- Jindal Hissar , Tata , Surya Parkash ) A ) 150Mm Dia , Supplying And Fixing Of Fire Brigade Connection Of Cast Iron Body With Gun Metal Male Instantaneous Inlet Couplings Complete With Cap And Chain As Reqd . For Suitable Dia Ms Pipe Connection Conforming To Is 904 As Required : ( Make :- Life Guard , M-Tech , New Age ) A ) 4 Way - 150 Mm Dia M . S . Pipe , 2 Way - 100 Mm Dia M . S . Pipe , Provision For Supplying And Fixing Of Pressure Gauge Made Of Brass Burden Tube , Movement And Socket , Pressed Steel M . S . Casing , Stove Enameled Black Finish , Accuracy +/- , Temp . Limit . 90 Degree Celsius . ( Make:-H-Guru/ Indloss / Equivalent ) , Providing & Fixing Of Pressure Switch In M . S . Pipe Line Including Connection Etc . As Required . ( Make:-H-Guru/ Indloss / Equivalent ) , Provision For Providing And Fixing Gunmetal Single Acting Air Release Valve With Screwed Inlet 25 Mm Dia . ( Make:-H-Guru/ Indloss /Lifeguard , Equivalent ) , Supplying And Fixing Orifice Plate Made Out Of 6 Mm Thick Stainless Steel ( Grade 304 ) With Orifice Of Required Size To Be Fitted Between Flange & Landing Valve Of External And Internal Hydrants To Reduce Pressure At The Outlet To The Level Of 3 . 5 Kg/Cm2 Complete As Required . , Provision For Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank , Isi : 12701 Marked , With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet , Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank . Make ( Syntex/Vectus/Ganga ) , Supplying And Fixing Air Vessel Made Of 250Mm Dia , 8Mm Thick Ms Sheet , 1200Mm , In Height With Air Release Valve On Top And Flanged Connection To Riser , Drain Arrangement With 25Mm Dia Gun Metal Wheel Valve , With Required Accessories , Pressure Guage And Painting With Synthetic Enamel Paint Of Approved Shade As Required . , Provision For Scraping The Existing Paint & Rust With The Help Of Emery Paper From The Ci/Ms Pipe Of 100 Mm Dia & Applying To Or More Coats Of Synthetic Enamel Paint Of Approved Brand & Manufacturer To Give & Even Shade Complete Etc As Reqd At Site ( Asian/ Nerolac/ Burger Make ) , Provision For Supplying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Power Cable Of 1 . 1 Kv Grade Of Following Size On Wall Surface As Required . ( A ) 3 X 10 Sq Mm ( Makes:- Polycab , Havells , Finolex ) , Provision For Supplying & Fixing Of 7 . 5 Hp Dol Starter With 380/415 Volts . Coil Relay Range 9 To 13 Amp On The Wall I/C Connection Testing Etc . As Required ( Make : Bch/L & T ) , Credit Of Material Against Above Work I ) Fire Fighting Motor/Water Supply Assorted Size , Valves Assorted Size 65 Mm / 80Mm/100 Mm/ 150Mm , Rrl Hose Pipe Coupling , Hose Reel , Hose Cabinet Assorted Size , Fire Brigade Connection , Pressure Gauge , Cable Assorted Size Of Above Work
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Delhi View Result →
22.
Power #10774240 Price Bid
Tender For Annual Rate Contract For Supply Of Spares Of M/S Elgi Make Air Compressors For Various Power Plants Of Rvun I.E. Ctpp-O&M, ,Chhabra, Ctpp-Sc, Chhabra, Stps(O&M), Suratgarh ,Stps-Sc, Suratgarh, Ktps, Kota, Katpp, Jhalawar, Dcpp, Dholpur - Mechanical Items 2 107315-EXPANSION VALVE (B740104) Part No.B000500010111 3 115014-COMPRESSOR MTZ125(B680111) Part No.B000500010077 4 24V DC SOLENOID VALVE Part No.10450200 5 90 Deg Elbow CPLG-E18-E22 Part No.B004700770016 6 9BD 1/4 BSP 12 68 GIMC PG Part No.B212311 7 A/E PKG, 225 TRB GR:2, VI3.6 Part No.X990463 8 ACTUATER ASSLY.(Without Diapharam Type) Part No.B011501070001 9 ACTUATOR REPAIR KIT HB Part No.B009401070011 10 ACTUATOR REPAIR KIT WITH SPRING Part No.B015401070005 11 ADAPTER NUT PRESSURE SWITCH Part No.10461090 12 After Cooler Assembly Part No.01034469B 13 After Cooler Assy Part No.15302436 14 After Cooler Assy SS20 Part No.B011301290007 15 AIR END Assy Part No.X019259 16 AIR END ASSLY E-37 Part No.X039106 17 AIR END ASSY (E-160-5.5) Part No.X990500 18 Air Filter ASS F6 Open Type Part No.B004700770036 19 Air Filter Element 90 TO 132 Part No.B574609 20 AIR FILTER ELEMENT (1390 CFM) Part No.B005700730003 21 Air Filter Element 10S - Horizon Series E11/15 Part No.B574603 22 Air Filter Element 12S Horizon Series - New Part No.B574604 23 Air Filter Element EG18-22 Part No.B005700770005 24 ANTI VIBRATION MOUNT PAD PC 140 C (Air End) Part No.B141433 25 Anti Vibration Mount PAD Pc 182b (Motor Side) Part No.B141429 26 Auto Drain Float Type Part No.B001305630001 27 AUTO DRAIN VALVE KIT F5 & F6 B000306040013 Part No.B001302940001 28 AVM (ANTI VIBRATION MOUNT) NO.2 NH1X Part No.41041X020 29 B D V Assy (E132)1/2 Part No.A010029 30 BDV Kit - E1320-37-45 HOR Part No.220371089 31 BDV Kit (Service Kit for VVF15) Part No.B009401070003 32 BOLT HEX M10X45 8.8 ZBP 5-8M Part No.906148 33 BREATHER VALVA ASSLY. A020030 Part No.411380 34 Bush ADOPTOR REDUSOR 5/8 Part No.10461030 35 CHECK VALVE Part No.B004101070001 36 CHECK VALVE ASSLY DELY Part No.41031X006 37 Circlip Internal 20mm 100 Dia Part No.917220 38 COLLER LUBE OIL Part No.41041X014 39 CONNECTOR HOSE ADOPTOR 1/2 Part No.22343137C 40 Connector Rubber CCVA-Duct Part No.410420006 41 Connector Set FOR NEURON II Part No.00897903R 42 COUPLING ROTEX-28 Part No.B005400590005 43 Coupling TMS 1/4 x 1/4 T Part No.22047683A 44 Coupling TMS 1/4X1/8 NPT Part No.22047683P 45 Cylinder 100 Dia - Disc Valve Type Part No.00021010A 46 D/v Packing Small DIA 100 Part No.519220 47 Dia 150 Suction Hose WIT Endcuff Part No.B010306260001 48 DIFFERENTIAL PR. (OIL FILTER) Part No.B010700770001 49 DIFFRENTIAL PRE.SWITCH (SEPARATOR) Part No.B221901 50 DISC VALVE ASSLY. DIA .60 CYL A070017 Part No.313810 51 Disc Valve Assy 100 Dia A020569 Part No.A020042 52 DISC VALVE GASKIT SMALL 60 DIA D/V Part No.524070 53 Disc Valve Repair Kit 100 Dia Part No.22400989 54 DISCHARGE HOSE AIR END TO OIL TANK E-160-5.5 Part No.15301622 55 DISCHARGE HOSE AIR END-OIL TANK E132-5.5Part No.15303514 56 Drive Coupling 60/40.430 - E37-HOR Part No.B545922 57 Drive Coupling Bore 48/38.115 Part No.B545902 58 DRIVE COUPLING DIA 80/60 Part No.B548313 59 Drive Coupling Element Rotex 48 - EG37-45 Part No.12437520 60 DRIVE COUPLING INSERT Part No.B005401170007 61 Elbow TMS 1/4 X 3/8NPT Part No.22047681C 62 ELBOW 37FL/90M 7/8UNFX1/2NPT Part No.22343136C 63 ELBOW TMS 1/4 X 1/4 Npt Part No.22047681B 64 Element Filter B Type Part No.317820 65 ELEMENT SEPARATOR Part No.10350060 66 ELEMENT SEPARATOR (E160-5.5) Part No.B677701 67 ELEMENT SEPARATOR E-132-5.5 Part No.10454350 68 ELGI Air Lube UT OIl 208 LTR 998103 Part No.998069 69 ELGi Air Lube XD - 210 Ltr 998121 Part No.998055 70 EMERGENCY SWITCH/STOP Part No.8940030 71 FILTER AIR INTAKE Part No.410420001 72 GASKET BIG CYL TO D/V DIA100 Part No.519210 73 GASKET MIST SEPARATOR Part No.415400383 74 GZHD- Automatic Drain Valve(B130101) Part No.B001303900001 75 HEX NIPPLE 1/4 Npt Part No.22037903A 76 HEX. Nipple 1/2x14 NpT Part No.220370540 77 High Sump Pressure Switch (INDFOSS) Part No.B182011 78 HINGE- M8-(DHFM-60) Part No.41041X287 79 HOSE - 1 1/4 OIL COOLER OUT Part No.15303928 80 Hose - 1 1/4In Oil Cooler In Part No.15302546 81 Hose 1-1/4 OIL COOLER TO OIL FILTER INLET Part No.10445060 82 Hose 1-1/4 Oil Injection 015310983 Part No.15304655 83 HOSE ASSLY 1 1/4( OIL FILTER-OIL TANK) Part No.10343270 84 HOSE ASSLY 1/2X1000 Part No.15400998 85 HOSE ASSLY OIL FILTER-AIR END ASSLY 132-5.5 Part No.15400154 86 HOSE ASSLY. ( OILFILTER-AIR END ) Part No.10450470 87 Hose Assy (Mpv After Cooler) Part No.15301628 88 HOSE Assy . 32 NB (Metalic Elbow) E110-100 OUT LET Part No.10445120 89 HOSE WITH METALLIC BELLOW Part No.10450520 90 HOSE WITH METALLIC BELOW 50NB Part No.15400624 91 INTAKE VALE ASSY (E 160-5.5) Part No.B009801070010 92 Intake Valve Kit (NC 3) Part No.10331209 93 Intake Valve Assly- Nc 3 E30-37, Horizon Part No.B009806750002 94 Intake Valve KitE-132-5.5 Part No.10331109 95 INTAKE VALVE KIT (E-160-5.5) Part No.B009401070004 96 Intake Valve Kit 3 - E30-45 HOR - 12S Horizon Part No.10331219 97 Intercooler Assly SS20 Part No.B011301290006 98 KIT - TUBES & ACCESSORIES OA2 Part No.412400534 99 KIT AIR PIPING OA2 Part No.412400531 100 KIT CCVA OW2 Part No.412400502 101 KIT DISCHARGE VALVE RR80/3CDB Part No.72403739 102 KIT LUBRICATION PIPING OA2 Part No.412400532 103 KIT OIL FILTER Part No.10440229 104 Kit, Gasket and Sealing Part No.72403419 105 KIT, SPARES, 1 YR TRC2507 Part No.72403399 106 LOW WATER PRESSURE SWITCH (DANFOSS) Part No.B185103 107 M P V KIT E-132-160-5.5 Part No.B009301070004 108 MINIUM PRESSURE VALVE 1 1/4 Part No.22021052A 109 Mist Seperator NH20_NH31 Part No.410420133 110 Moisture Separator MS150 Part No.A010103 111 MPV KIT ( with Check Valve MPVL 65F) Part No.B009301070012 112 MPV with Check Valve - MPVL80F Part No.B009301070009 113 MPV WITH CHECK VALVE- MPVL65 Part No.B009301070003 114 Multi Tap Transformer - 50VA (400/24V) Part No.8937046 115 Neuron-II Controller PLC Part No.00897701N 116 NRV Assy 1/4 ROCD Part No.B441701 117 O/C (oil cooler) and A/C (After cooler)Assy WC 100-180HP Part No.10344690 118 Oil Cooler & After Cooler Assy Part No.B007700690004 119 Oil Cooler Assy Part No.15302437 120 OIL COOLER ASSY. (E-160) Part No.01034469A 121 Oil Filter - SpinOn - E/EG11-75 Part No.B004800770001 122 OIL FILTER ELEMENT 180 LPM ( E-90,110,160) Part No.B407701 123 OIL FILTER HEAD ASSLY. 360LPM Part No.15303640 124 Oil Sight Glass 1 1/2 Bsp 1500-400 Part No.15306517 125 OIL Sight Glass 11/2NPT Part No.A010018 126 O-RING ID 47.2X3.5 Part No.10451500 127 O-RING ID 80.0X3 Part No.15402871 128 O-RING ID69.4X3.5 Part No.15402687 129 Pipe Assy Contg No. 2 Ss15ts 10 Part No.334010 130 Pipe Assy Contg No.3 Ts 10/12 Part No.334020 131 PIPE ASSY.WATER LINE Part No.10445130 132 PIPE CONNECTOR PCDIN 32 Part No.B005604660007 133 PIPE CONNECTOR PCNB 100 VITON Part No.B005604660012 134 PIPE COUPLING 1 1/2 STY12 Part No.B56XX07 135 Pipe Ret Line 20/16 Tandem Part No.10454710 136 Pipe Return Line Part No.15301053 137 Piston Assy Dia 60 TS / HP(TRC1000) Part No.413120 138 Pkg Big Dia 60 D/V (TRC1000)MN Part No.524060 139 Plastic Tubing Dis 10*1.5 Blue Part No.919242 140 Plug Hex 3/4 Bsp HV20/25/30 Part No.510740 141 Pr Transmeter 16 Bar E75-160 Part No.00897901c 142 Pr. Regulator Aircon Part No.B158002 143 Pr. Regulator Aircon Kit PR934 Part No.B158004 144 PR. SWITCH KP 36 ( 2 TO 14 BAR) Part No.B001800510002 145 PRESSURE REGULATOR Part No.B001501070001 146 Pressure Regulator (PRNE 1.2mm) Part No.B001501070002 147 Pressure Relief Valve Part No.B012806660008 148 Pressure Relief Valve Assy 1/2 Part No.A010019 149 PRESSURE RELIF 1 VALVE ASSLY Part No.B012806660001 150 Pressure Transmitter 0-16 Bar M Part No.00897902N 151 QUICK FITTING ELBOW 3/8-10(PART NO.920609) Part No.920611 152 Reverse Rotation Switch Part No.8941151 153 Rubber Elbow 8x7 Part No.220375380 154 Safety Valve 90-132 Kw 13 Bar Part No.B012806160003 155 Seal Oil B50*72*12 Trc 1000B Part No.420360 156 Separator Element 12S Hor - E30-45 Part No.10451050 157 SHUTTEL VALVE (E-132) Part No.B011001070001 158 Silencer Blow Off NH1X Part No.410320149 159 SLEEVE FOR 6X4 MM TUBE Part No.959763 160 Sleeve, Gearcase Side NH20 Part No.410420118 161 Solenoid Value 240VAC NO E30-37-45 HOR Part No.B738207 162 SOLENOID VALVE 220V A/C Part No.B007300990007 163 SOLENOID VALVE 110V - NH42 Part No.B007300820001 164 SOLENOID VALVE 240 V NC Part No.B738208 165 SOLENOID VALVE NC 24V 50HZ Part No.B007300990004 166 SOLONEID VALVE ASSLY 4 WAY Part No.B73XX04 167 STAND PIPE ADOPTOR 1/4 Part No.15400598 168 STAND PIPE ADOPTOR 1/8 Part No.15400702 169 Strainer Oil NH1X Part No.41041X019 170 TEE MALE Part No.10445040 171 TEE PIPE 1/2 NPT Part No.22047680C 172 Tee Pipe 1/4 Part No.22047680A 173 TEE Run Taper MALE 1/4 Part No.22037106A 174 TEE; BRANCH; TM; 1/4X1/4NPT Part No.22047682A 175 TEMP. CONTROLLER-172808B009400010260 Part No.B710101 176 Temp. Sencer 0-150 Part No.00897902C 177 Temperature Switch LE 150 Part No.B171901 178 Thermal Valve 155 Part No.220322920 179 Thermal Valve ELEMENT 125 F Part No.220310800 180 Thermal Valve Housing Part No.220377200 181 TRANSFORMER 30VA ELRD150-400 Part No.B008604850001 182 TUBE RETURN LINE - 1.7 Part No.10363080 183 TUBINGS 6MM Part No.920620 184 Valve Air Intake 6 Aircon Part No.A010106 185 Valve Assy Breather Aluminum Part No.A020030 186 Complete Overhauling Kit of ELGI make compressor Model No. SP20400 (Disp. Vol-1230 lpm) T/B FAB. No.- CKJT600003 Part No.022402139 187 WASHER, SPRING M10 Part No.996110 188 NUT HEX M10 Part No.948010 189 Airend Assy. X990357 Part No.X990068 190 TMS Elbow 1/4x1/4(TEE) 22047681B Part No.22047681D 191 Inter cooler Part No.216130 192 Valve assembly, safety 3/4BSP B841701 Part No.B8441701 193 Valve assembly, drain 1/4BSP Part No.A020045 194 Pipe assembly No. 1 Pressure line 70407340 Part No.445860 195 Pipe assembly No. 2 Pressure line 70407350 Part No.320930 196 Farul with nut 10mm Part No.220374440 197 After Cooler Part No.103469B 198 Hose MPV to Cooler Part No.15400319 199 Hose MOF to Airend Part No.15400923 200 Pipe Coupling 1 1/2 Part No.B55xx07 201 Pre Filter for Air Filter Part No.B015403266 202 Anti Vibration Mount Pade (Airend & Motor Side) Part No.B001406190004 203 Oil Return Line Part No.15403077 204 Oil Sight Glass 1/8 Part No.B004606240001 205 BDV assy (E160.5.5) Part No.A010029 Part No.B00940107003 206 MPV KIT-10S-1-1/4-e30-37-45 HOR Part No.220210529 207 Air end return line fittingPart No.JLKI 208 Air End Assembly X990484 Part No.X990484 209 Rubber Reducer Part No.015305798 210 RDS mounting connector Part No.015403668 211 Air Filter Life Indicator Part No.B012400770001 212 1/4 BSP Straight fitting Part No.B009606780009 213 Run Tee 1/4 Part No.B009606780017 214 Multi Tap Transformer (500VA) Part No.0008937081 215 Multi Tap Transformer (100VA) Part No.0008937071 216 Thermistor Controller Part No.018362741 217 Single Mode Power SupplyPart No.B012701600041 218 Kit inlet valve Assembly Installed on Cylinder Head Part No.72403729 219 Oil Return Line Assembly Part No.15401395 220 Compressor Emerson / Danfoss 115895 KCM 5191512040422 Part No.B000500010121 221 Fan Motor1820031512040223Part No.B760103 222 Old Description & Part No.DRIER FILTER(Part No. B690101)New Description & Part No.:-225205-DRIER FILTER 0605010067 Part No.B006900010006 223 Condenser (Cooler) for ELRD 1254W0603000081 Part No.B000500010141 224 Kit Check Valve Part No.41041X032 225 GASKETKIT GEARCASE Part No.410420012 226 SEAL KIT OIL PRESSURE RELIEF VALVE Part No.41041X035 227 KIT CAPACITY CONTROL VALVE/ Gasket water pipe Part No.410420010 228 DISC COUPLING SM 220 Part No.B005401050012 229 SPACER MOTOR SIDE Part No.410420159 230 LEG MAIN MOTOR Part No.41031X197 231 INDICATOR OIL LEVEL Part No.41041X028 232 DIFFUSER ASSEMBLY Part No.410420174 233 PRESSURE RELIEF VALVE ASSEMBLY Part No.41031X007 234 RELIEF VALVE OIL PRESSURE Part No.B15XX01 235 SWITCH BLOW OFF PRESSURE Part No.B182010 236 PLASTIC TUBING DIA. 12 X 2 BLUE Part No.919252 237 PLASTIC TUBING DIA. 12 X 2 BLUEcorrected as DIA 6X1 BLU Part No.919226 238 Quick Fitting Elbow 1/4-10 Part No.920606 239 Quick fitting Connection 1/4-10 Part No.920506 240 Quick fitting Connection 3/8-10 Part No.920509 241 Quick fitting Connection 1/2-12 Part No.920512 242 PUMP LUBE OIL Part No.B12XX01 243 SHAFT WITH BULL GEAR,PINION GEAR Ist STAGE,PINION GEAR 2nd STAGE Part No.A410057 244 AIR BLOCK 1st STAGE Part No.A410053 245 AIR BLOCK 2ndSTAGE Part No.A410054 246 HOT GAS BY PASS VALVE Part No.B750101 247 HIGH PRESSURE SWITCH Part No.B180101 248 LOW PRESSURE SWITCH Part No.B180102 249 Quick Fitting Elbow 1/2-12 Part No.920612 250 Reducer (1 X 1 1/2 ) Part No.22037901G 251 Manifold 1/4Part No.10460950 252 S S T Bolt Clamp DIA-199 Part No.B505304 253 S S T Bolt Clamp DIA-225 Part No.B505305 254 Airend Assy (E160-5.5) Part No.X990060 255 Elbow Male 11/2 X 11 / 2 Part No.10445030 256 TMS Couplng 1 1/2 X 11/2 22047683K Part No.220476200 257 Complete Overhauling Kit of ELGI make compressor Model No. THPC500(Disp. Vol-500 lpm) T/B FAB. No.- 66459 Part No.X020012A 258 Kit disc valve assy. 60DA070017 Part No.72400980 259 Intake Valve Assly. 3 E-30-45 NO B009806750002 Part No.A010270 260 Display PCB E-15 Part No.10866219 261 Separator Element 12S Hor - E30-45 317 CFM Part No.10451060 262 Kit Tune Up - TS07HN Part No.K0206101 263 Cylinder 100 Dia - SS07H Part No.00021010D 264 Cylinder 60 Dia - TS05/07 -NH Part No.210110 265 Piston W /Gudgen Pin 100 Dia Part No.20494560 266 Kit Piston/GP /Circlip 60 Dia -TS Part No.22455969 267 Cylinder Head 100 Dia TS05/07H Part No.00021238C 268 210120 Cylinder Head 60 Dia TS07HN Part No.210120 269 Con Rod Crank Shaft Assy W/Brg - TS07HN Part No.20362530 270 Gasket Free End Cover SS07/10 Part No.425460 271 Gasket Fly End Cover SS07/10 Part No.425470 272 Oil Seal TS 05/07/10/15, SS 07/10 Part No.420350 273 Rubber Beading Part No.432330 274 Oil Level Indicator 1 1/4BSP Part No.513440 275 Valve Flat 100 Dia TS/ SS Part No.310070 276 Valve Flat 60 Dia TS07HN Part No.310080 277 KIT PR.SWITCH RETROFIT TS 220 Part No.22458379 278 FILTER ASSY I/L AIR B TYPE Part No.A020024 279 SV ASSY 1/4BSP 14KSC TS Part No.A020196 280 HOSE ASSY PVC& WIRE SS03/TS03NZ Part No.A020216 281 HOSE ASSY PVC&WIRE SS03/TS03NZ Part No.A020217 282 SV ASSY ? INCH BSP 16.2 KSC TS Part No.A020241 283 NRV AND CONNECTOR ASSY Part No.A020559 284 KIT PR. GAUGE RETROFIT TSLB Part No.22459279 285 VALVE ASSY BALL 3/4BSP Part No.B312716 286 VALVE ASSY BALL 3/8BSP Part No.B312725 287 RAC UNIT TS07 HN 100X60 Part No.X020758 288 A/C PIPE B/D TS07HN NEW FITT Part No.20365650 289 PR PIPE LINE ASSY 220L Part No.20496930 290 STARTER DOL 7.5 HP 415V Part No.518901530 291 117201-HAND SHUTOFF VALVE Part No.B011000010001 292 350 Dia Sucker Fan - 60 Hz Part No.18400036 293 Actuator Kit (W/0 Diapragm) Piston Type - F4 (B015401070005) Part No.B009401070008 294 ACTUATOR SPRING PISTON TYPE (B015401070005) Part No.B015001070001 295 ADAPTER FOR TEMP SWITCH Part No.30449400 296 Adapter Inlet Part No.15400589 297 Air End (132-5.5) X990462 Part No.X990030 298 AIR FILTER ASSY E37 Part No.B476702 299 AIREND PKG 2.70:1 E10 2BOLT FL Part No.X019255 300 ANN PCB ASSLY EPSAC Part No.8766219 301 Auto Drain Valve Internal - F2 - EG11-22 B001305630001 Part No.B001305480003 302 C/R Con Rod Crank Shaft Assy WB - TRC1000B Part No.70301130 303 CIRCLIP INTERNAL 18 MM Part No.917218 304 CONE ERMETO 1 BSP (000419240) Part No.00041924A 305 CONROD&C/SHAF ASSY;W/B TRC2507 Part No.70301140 306 CONTROL LINE TUBE E 30 Part No.15303179 307 Cyl Dia 60 D/v M/c TRC 1000 MN Part No.00021011A 308 DAMPENING PIPE ( INTER COOLER) Part No.428190 309 DISC VALVE ASSY DIA 100 (MODI) Part No.A020569 310 DISCHARGE PIPE ASSLY Part No.15303515 311 Ermeto, 3/4X1 BSP (00041017A) Part No.410170 312 FILTER ASSLY - OIL BATH - TS/SS (A070009) Part No.A070009 313 FILTER UNIT (184X184) Part No.18400062 314 Gasket 0.8 C/case to Cyl Bp 07/10 Part No.00041004C 315 Gasket Fly End S 10 Part No.431980 316 Gasket Free End TS 10 Part No.431990 317 GASKIT 0.4C/CASE TI CYL TS05 Part No.00041004B 318 GASKIT CYL TO CYL HEAD Part No.445610 319 HEAD DIA127 M/C HV Part No.215150 320 HOSE DISCHARGE (AIR END TO OIL TANK) Part No.15310767 321 Hose 1-1/4 Oil Injection 015402283 Part No.15304655 322 Hose 1-1/4 Oil Injection (000959438) Part No.15304655 323 Hose 1-1/4 Oil Injection (015305799) Part No.15304655 324 HOSE ASSLY TV TO O/C KIT-F5F6WC Part No.12473579 325 HOSE ASSLY. MPV TO A. COLLER EE 160-110 Part No.15300312 326 HOSE ASSY OC TO TV KIT- F5F6 WC Part No.12473589 327 HOSE ASSY 1/2 IN BDV E 90-110 Part No.15401740 328 HOSE ASSY O/C TO TV F5F6 WC Part No.15307093 329 Hose Assy Tank to MPV Kit - F6 WC Part No.12473609 330 HOSE ASSY TV TO A/E KIT-F6 WC Part No.12473629 331 HOSE ASSY- TV TO AIREND F6 WC Part No.15307355 332 HOSE ASSY. TV TO OIL COOLER WC Part No.15307092 333 HOSE ASSY.Tank to MPV F6 WC Part No.15307356 334 HOSE MED. PR. 1/2X32 Part No.22032027H 335 HOUR TOTALIZER H 57-55 24 V AC Part No.8938031 336 Intake Valve Kit Part No.B009401070009 337 KEY WOODRUFF Part No.420440 338 KIT IC MOS OA2 Part No.412400530 339 MIMIC PCB EPSAC WITH 0.5 M CABLE Part No.8766234 340 MULTI TAP TRANSFORMER 50 V Part No.8937048 341 NUT ERMETO 1 BSP (00041928A) Part No.419280 342 NUT HEX M10 8 ZBP Part No.948010 343 OBS PISTON RINGS DIA 197 Part No.22401079 344 OBS Piston Rings Dia127 TRC250 Part No.72403479 345 OBS PISTON RINGS DIA60 Part No.22401039 346 Oil and After Cooler Assy Part No.15307125 347 OIL FILTER ASSLY E-110 (015303640) Part No.B487702 348 PISTON & GP DIA60 TS05/07 Part No.477730 349 Piston Assy 100 Ss/TS 07 10 15 (TRC1000) Part No.413110 350 Piston Assy 127 HV TRC2507 Part No.428900 351 Piston Assy 197 HV20/25TRC2000 Part No.445850 352 Piston Ring Set Dia 100 MNUG (TRC1000)(022401059) Part No.72404039 353 Piston Ring Set Dia 60 MNUG (TRC1000) Part No.72404049 354 PRESSURE GAUGE 0-16 KG Part No.B212110 355 PRESSURE TRANSMETER 1TO6 BAR Part No.8979024 356 Rubber Elbow 4 16 S Part No.220375400 357 RUBBER PIPE BEND ID 76 Part No.B906701 358 Safety Valve 3/4BSP 6.5Bar Part No.B841701 359 Safety Valve 3/8 Bsp Part No.A020002 360 Seal Oil 85x110x13 Nh1 x Part No.41041X017 361 SPLIT COOLER E-37 Part No.B007700690010 362 STAINER ELEMENT 6CD 3UC Part No.325520 363 STUD M12X45 C/CASE TO 50CYL Part No.514560 364 STUD M12X54 60CYL Part No.514550 365 STUD M12X70 SS02/03/05 TS02/03 Part No.518830 366 Temperature Gauge 40-125 Part No.B202101 367 THERMAL VALVE BLOCK-F5 & F6-MA Part No.15305128 368 VALVE ASSLY .PRESSURE RELIF 1 Part No.A010107 369 Valve Assy Disc Dia60 Part No.A070017 370 WASHER CU HEAD TO CAP NUT Part No.439270 371 WASHER SPRING REC SEC M10 ZBP Part No.996110 372 WATER SEPRATOR W/O DRAIN 21/2 Part No.B000306040010 373 Drive Coupling Insert UCW 295 Part No.B05401170007 374 Stud M16x60 crank case and cylinder Part No.465300 375 Ring,spacer-bearing Part No.471280 376 Bearing,ball ,single row SKF 6310 Part No.903361 377 Gasket -free end cover Part No.445570 378 Cover free end Part No.329170 379 Gasket-fly end cover Part No.445880 380 cover ,fly end Part No.329150 381 washer spring M12 Part No.996112 382 Bolt hex M12x40 Part No.906185 383 Gasket -crank case to dia 197 cylinder 0.75mm Part No.445600 384 Gasket -crank case to dia 197 cylinder 0.4mm Part No.00044560A 385 Cylinder dia 197 Part No.320920 386 Washer spring M16 Part No.996116 387 Nut hex M16 Part No.948016 388 Gasket -crank case to dia 127 cylinder 0.75mm Part No.00042843A 389 Gasket -crank case to dia 127 cylinder 0.4mm Part No.00042843B 390 Gasket -crank case to dia 127 cylinder 0.2mm Part No.00042843C 391 Cylinder dia 127 Part No.214670 392 Head, dia 197 cylinder Part No.216100 393 Bolt , Hex, M16x110 dia 197 cylinder head Part No.906226 394 Gasket dia 127 cylinder to cylinder head Part No.440680 395 Bolt , Hex, M12x110 dia 127 cylinder head Part No.906197 396 Washer copper -inlet and discharge valve Part No.439260 397 valve assembly inlet Part No.A070072 398 Valve asssmbly discharge Part No.A070071 399 Plug inlet valve Part No.319290 400 Plug discharge valve Part No.319300 401 Valve assembly suction unloader Part No.A070073 402 Nut cap Part No.439280 403 Nipple hex 1x1 BSP Part No.432090 404 Elbow 1 BSP Part No.972055 405 Pipe 1 BSP breather Part No.438460 406 Socket 1 BSP Part No.20484920 407 Ring packing,Drain plug Part No.521960 408 Plug assembly, drain 1/2 BSP Part No.A020034 409 Ring, packing,dipstick Part No.474750 410 Dipstick with chain Part No.70400730 411 Gasket,dia 197 cylinder head to suction bend Part No.445730 412 Bend, suncton Part No.320790 413 washer spring,1/2 Part No.996205 414 Gasket air intake strainer to dia 197 cylinder head flange Part No.445730 415 Strainer with mounting flange,air intake Part No.330880 416 Gasket,Dia 197 cylinder head flange Part No.445730 417 Gasket,Dia 127 cylinder head flange Part No.445330 418 Bolt, hex, M10x40 Part No.906147 419 Key word ruff Part No.70401790 420 Cooling fan and Pulley assembly Part No.A070077 421 Washer Part No.70400150 422 Nut, castle M16x1.5 Part No.400090 423 Pin split 1/4 Part No.965498 424 Gasket dia 127 cylinder head flange to del. Manifold Part No.445330 425 Manifold delivery Part No.330660 426 Plate dummy,Delivery flange Part No.471290 427 Gasket,delivery flange Part No.445330 428 Flange with pipe,delivery Part No.70400770 429 Air Filter Element Part No.41041x013 430 Inter cooler drain silencer Part No.410320150 431 DISCHARGE VALVE ASSLY.(MOD-A0700710)A070071 Part No.MOD-A0700710 432 SS T Clamp Part No.B013704300005 433 Scavenging Line Lube Part No.15316211 434 panel View PVP4002711-PK4 C5D Part No.8901019 435 Bolt,Hex 1/2 UNCx1.25 Part No.000907247
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
23.
Youth Affairs and Sports and Culture #10721205 Price Bid
Rate For First-Aid & Consumables Items 2025 , Item Wise Boq 15.0 Boq_Ver3.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Director Sports And Youth Welfare, T.T. Nagar Stadium Bhiopal Name Of Work: Rate For First-Aid & Consumables Items 2025 Contract No: Name Of The Bidder/ Bidding Firm / Company : Price Schedule (Domestic Tenders - Rates Are To Given In Rupees (Inr) Only) (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevant Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Product Name & Specification Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder In Rs. P Excise Duty Amount In Inr Rs. P Gst Amount In Inr Rs. P Freight Charges ( Unloading & Stacking) In Rs. P Any Other Taxes In Rs. P Any Other Duties/Levies In Rs. P Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Name Of Manufacturer/ Brand Total Amount Without Taxes In Rs. P Total Amount With Taxes Col (14) = Sum (8) To (13) In Rs. P Total Amount In Words , Firstaid & Consumables , Arm Sling , Shoulder Immobilization Sling , Shoulder Support With Movement Limitation , Clavicle Support , Adjustable Abduction Shoulder Support , 15-Degree Abduction Shoulder Support , 45-Degree Abduction Shoulder Support , Elastic Elbow Support , Elbow Support With Silicone Pads , Elastic Elbow Support With Pads , Epicondylitis Elbow Strap , Elbow Mobilization Orthosis , Wrist And Forearm Immobilization Support , Wrist Support , Carpal Tunnel Wrist Support , Thumb Support , Soft Cervical Support , Cervical Immobilization Collar , Posture Correction T-Shirt , Back Orthosis For Vertebral Extension , Taylor Brace For Hyperkyphosis , 4-Point Spinal Hyperextension Brace , Flexible 4-Point Spinal Hyperextension Brace , Abdominal Support Bandage , Basic Lumbar Stabilizing Support , Economical Lumbar Support , Lumbar Support With Massage Pad , Lumbar Stabilizing Support , Lumbar Orthosis With Tension Straps , Adjustable Lumbar Stabilizing Support , Sacroiliac Stabilizing Brace , Maternity Support Belt , Hip Joint Orthosis (Hip) , Hip Joint Orthosis (Thigh) , Elastic Knee Support - Basic , Elastic Knee Support - Top Silicone Band , Elastic Knee Support - Steel Spiral , Elastic Knee Support - Open Patella , Patella Support Knee Brace , Elastic Knee Support With Patellar Ring , Patellar Tendon Support , Patellar Lateralization Knee Support , Patellar Tendon Pain Relief Knee Brace , Physiological Knee Orthosis , Short Functional Knee Brace , Long Rigid Knee Brace (4-Point) , Short Knee Brace With Rom Limit , Short Functional Knee Brace , Rigid Acl Brace With Hinges , Rigid Acl Brace With Hinges - Comfort , Dynamic Pcl Knee Brace , 4-Point Acl/Pcl Knee Brace , Hyperextension Knee Brace , Lightweight Oa Knee Brace , Oa Knee Brace With Wrap , Soft Oa Knee Brace With Rom , 4-Point Oa Knee Brace , Pcl Immobilisation Brace , Universal Knee Immobilizer , Compression Ankle Support , Silicone Ankle Support , Elastic Ankle Support With Strap , Achilles Tendon Support With Silicone Pad , Elastic Achilles Tendon Support , Foam-Gel Ankle Brace , Lace-Up Ankle Brace , Adjustable Ankle-Foot Drop Brace , Standard Walker Boot , Rom Adjustable Walker Boot , Fixed Walker Boot , Pneumatic Air Walker Boot , Silicone Foot Support - Heel Soft , Silicone Foot Support - Insole , Toe Spreader , Forefoot Cushion , Performance Elbow Support , Performance Lumbar Support , Performance Knee Support For Soft Tissue Compression , Sporty Ankle Support , Shoulder Immobilization Brace - Kidz , Knee Immobilization Brace - Kidz , Wrist Immobilization Brace - Kidz , Ankle Foot Immobilization Brace - Kidz , Ankle Orthosis For Stabilisation - Kidz , Orthopedic Insole - Sport , Orthopedic Insole - Comfort , Orthopedic Insole - Comfort Pro , Orthopedic Insole - Carbon , Anti-Embolism Calf Stocking , Anti-Embolism Thigh Stocking , Anti-Embolism Thigh Stocking With Waist Attachment , Surgical Compression Calf Stocking White , Surgical Compression Thigh Stocking White , Surgical Compression Calf Stocking Brown , Surgical Compression Thigh Stocking Brown , High Compression Calf Stocking White , High Compression Thigh Stocking White , High Compression Calf Stocking Brown , High Compression Thigh Stocking Brown , Adjustable Lower Leg Compression Wrap , Adjustable Ankle Foot Compression Wrap , Premium Adjustable Lower Leg Compression Wrap , Premium Adjustable Upper Leg Compression Wrap , Adjustable Arm Compression Sleeve , Adjustable Hand Compression Wrap , Waist To Mid-Thigh Compression Garment , Breast To Ankle Compression Garment , Breast To Knee Compression Garment , Breast To Mid-Thigh Compression Garment , Waist To Thigh Compression Garment , Breast To Thigh Compression Garment , Compression Belt , Compression Bra , Digital Wrist Blood Pressure Monitor , Digital Upper Arm Blood Pressure Monitor , Digital Upper Arm Blood Pressure Monitor (Bluetooth) , Digital Upper Arm Blood Pressure Monitor On Arm (No Hose/Cable) , Digital Upper Arm Blood Pressure Monitor With Ecg Function , Glucometer With Strips , Body Composition Monitor , Bmi Scale , Ankle Tens , Knee And Elbow Tens , Digital Tens/Ems Unit , Digital Tens/Ems Device With Heat , Menstrual Relax , Foot Massager , Footbath Massager , Facial Sauna , Clinical Thermometer , Ear Thermometer , Non-Contact Thermometer , Hearing Amplifier , Heated Under Blanket , Electric Blanket , Back & Neck Heating Pad , Steam Vapouriser , Nebulizer , Ir Lamp - 100W , Ir Lamp - 150W , Ir Lamp - 300W , Ir Lamp Replacement Bulb - 100 W , Ir Lamp Replacement Bulb - 150 W , Air Purifier - 26Msq , Air Purifier - 54Msq , Air Purifier - 106Msq , Yoga Strech Mat - With Vibration & Heat , Infrared Massager , Physio Gun , Pulse Oximeter , Analogue Weighing Scale , Digital Weighing Scale , Hypervolt Go 2 , Hypervolt 2 Pro , Hypervolt 2 , Normatec 3 Leg Package - Standard , Normatec Premier , Normatec Go , Normatec 3 Hip Attachment , Normatec Arm Attachment , Vyper 3 Eu , Hypersphere Mini Black , Hypersphere Black , Venom 2 Back , Venom 2 Leg , Venom Go , Venom 2 Right Shoulder , Venom 2 Left Shoulder , Venom Pod Shoulder Right , Venom Pod Shoulder Left , Heated Hypervolt Head Attachment , Hypervolt Charger Head Eu/Usa/India , Hypervolt Head Attachments , Hypervolt Case , Hypervolt Go 2 Charging Dock , Hypervolt 2 Charging Dock , Hypervolt 2 Pro Charging Dock , Hypervolt Eva Case Black One Size , Venom Go Case , Venom Go Refill Pack , Normatec Carry Case , Hyperice Carry Case (Normatec) , Pulse Carry Case Black One Size (Normatec) , Normatec 3 Backpack , Theragun Elite , Theragun Prime Plus , Theragun Pro Plus , Theragun Relief , Theragun Sense , Theragun Mini , Theragun Mini 2.0 , Theraface Pro , Therabody Recoverytherm Cube , Therabody Hot And Cold Knee , Achedaway Mini Scraper , Achedaway Heated Muscle Scra , Achedaway Cupper , Achedaway Cupper Duo , Compex Sp 5.0 , Compex Sp 8.0 , Game Ready Grpro 2.1 , Mueller Revive™ M4 , Mueller Revive™ M2 , Portable Heat, Cold, Contrast & Compression Therapy Machine (Mueller Therm X) , Mueller Therm X Garments Each , Clx Loop Red , Clx Loop Green , Clx Loop Blue , Clx Loop Black , Clx Loop Silver , Clx Loop Gold , Resistance Loop 12” - Red , Resistance Loop 12” - Green , Resistance Loop 12” - Blue , Resistance Band – Very Light – 1.5 Mtr (Yellow) , Resistance Band – Light – 1.5 Mtr (Red) , Resistance Band – Medium – 1.5 Mtr (Green) , Resistance Band – Heavy – 1.5 Mtr (Blue) , Resistance Band – Extra Heavy – 1.5 Mtr (Black) , Resistance Band – Super Heavy – 1.5 Mtr (Silver) , Resistance Band – Maximum Resistance – 1.5 Mtr (Gold) , Active Recovery Kit Eu/La Beginner , Active Recovery Kit Eu/La Adv , Resistance Band – Very Light – 5.7 Mtr (Yellow) , Resistance Band – Light – 5.7 Mtr (Red) , Resistance Band – Medium – 5.7 Mtr (Green) , Resistance Band – Heavy – 5.7 Mtr (Blue) , Resistance Band – Extra Heavy – 5.7 Mtr (Black) , Resistance Band – Super Heavy – 5.7 Mtr (Silver) , Resistance Band – Maximum Resistance – 5.7 Mtr (Gold) , Yellow Tubing Thera-Band 25Ft , Red/Medium Thera-Band Tubing 25Ft Disp Box , Green/Hvy Thera-Band Tubing 25Ft Disp Box , Blue/Ext Hvy Thera-Band Tubing 25Ft Disp Box , Black/Special Hvy Thera-Band Tubing 25Ft Disp Box , Silver/Super Hvy Thera-Band Tubing 25Ft Disp Box , Yellow Tubing 100 Ft , Red Tubing 100 Ft , Green Tubing 100 Ft , Blue Tubing 100 Ft , Black Tubing 100 Ft , Silver Tubing 100 Ft , Yellow Tubing W/Soft Handle , Red Tubing With Soft Handle , Green Tubing With Soft Handle , Blue Tubing With Soft Handle , Black Tubing With Soft Handle , Silver Tubing With Soft Handle , Resistance Tubes Light Retail , Resistance Tubes Heavy Retail , Red Tubing Loop W/Padded Cuff , Green Tubing Loop W/Padded Cuff , Blue Tubing Loop W/Padded Cuff , Black Tubing Loop W/Padded Cuff , Rehab And Wellness Station , Door Anchor , Accessories Kit , Assist Strap , Sports Handle , Exercise Handle , 18/45Cm Yellow Exercise Ball , 22/55Cm Red Exercise Ball , 26/65Cm Green Exercise Ball , 30/75Cm Blue Exercise Ball , 33/85Cm Silver Exercise Ball , Pro Series Gym Ball Yellow , Pro Series Gym Ball Red , Pro Series Gym Ball Green , Pro Series Gym Ball Blue , Mini Ball Yellow , Silver Stability Disc 13” , Blue Stability Trainer , Green Stability Trainer , Black Stability Trainer Inflate , Rocker Board , Wobble Board , Flexbar-Yellow , Flexbar-Red , Flexbar-Green , Flexbar-Blue , Finger Flexion Exercise Disc Red , Finger Flexion Exercise Disc Green , Finger Flexion Exercise Disc Blue , Finger Flexion Exercise Disc Black , Finger Flexion Xtrainer Assorted Disc Pack , Yellow Hand Exerciser Ball , Red Hand Exerciser Ball , Green Hand Exerciser Ball , Blue Hand Exerciser Ball , Black Hand Exerciser Ball , Tan Soft Weight Ball (0.5Kg) , Yellow Soft Weight Ball (1Kg) , Red Soft Weight Ball (1.5Kg) , Green Soft Weight Ball (2Kg) , Blue Soft Weight Ball (2.5Kg) , Black Soft Weight Ball (3Kg) , Red Ankle Weight - 1 Kg Pair (0.5Kg Each) , Green Ankle Weight - 1.4 Kg Pair (0.7Kg Each) , Blue Ankle Weights - 2.2 Kg Pair (1.1Kg Each) , Shoulder Pulley , Stretch Strap , High Resistance Band Light And Medium (Color: Orange And Green) , High Resistance Band Medium And Heavy (Color: Green And Blue) , High Resistance Band Heavy And X Heavy (Color: Blue And Purple) , Digi-Flex Hand Exercisers - Tan, Xx-Light - Finger (0.75 Lbs) / Hand (2.5 Lbs) , Digi-Flex Hand Exercisers - Yellow, X-Light - Finger (1.5 Lbs) / Hand (5.0 Lbs) , Digi-Flex Hand Exercisers - Red, Light - Finger (3.0 Lbs) / Hand (10.0 Lbs) , Digi-Flex Hand Exercisers - Green, Medium - Finger (5.0 Lbs) / Hand (16.0 Lbs) , Digi-Flex Hand Exercisers - Blue, Heavy - Finger (7.0 Lbs) / Hand (23.0 Lbs) , Digi-Flex Hand Exercisers - Black, X-Heavy - Finger (9.0 Lbs) / Hand (31.0 Lbs) , Digi-Flex Hand Exercisers - Silver, Xx-Heavy - Finger (11.0 Lbs) / Hand (38.0 Lbs) , Digi-Flex Hand Exercisers - Gold, Xxx-Heavy - Finger (13.0 Lbs) / Hand (45.0 Lbs) , Digi-Flex Hand Exercisers - Set Of 5 (Yellow, Red, Green, Blue, Black), No Rack , Digi-Flex Hand Exercisers - Set Of 5 (Yellow, Red, Green, Blue, Black), With Metal Rack , Digi-Flex Hand Exercisers - Set Of 8 (Tan, Yellow, Red, Green, Blue, Black, Silver, Gold), No Rack , Digi-Flex Hand Exercisers - Set Of 8 (Tan, Yellow, Red, Green, Blue, Black, Silver, Gold), With Metal Rack , Mvp Balance System, 10-Ball Set (2 Each Yellow - Black), No Rack , Plastic Adjustable Multi Slant And Calf Stretcher Board , Finger Weights, Multicolor, Set Of 10 , Wobble Ball, 18 , Pronation/Supination Wrist Exercise Wheel , Gel-Hand Exercise Balls - 6-Piece Set (Tan Through Black) , 360 Stick Vibration Exerciser , Inflatable Exercise Sensi-Ball - Orange - 22 (55 Cm) , Inflatable Exercise Sensi-Ball - Green - 26 (65 Cm) , Inflatable Exercise Sensi-Ball - Red - 30 (75 Cm) , Inflatable Exercise Sensi-Ball - Blue - 34 (85 Cm) , Inflatable Exercise Sensi-Ball - Red - 39 (95 Cm) , Inflatable Exercise Saddle Roll (Peanut Gym Ball) - Yellow - 16 Dia X 35 L (40 Cm Dia X 90 Cm L) , Inflatable Exercise Saddle Roll (Peanut Gym Ball) - Orange - 20 Dia X 39 L (50 Cm Dia X 100 Cm L) , Inflatable Exercise Saddle Roll (Peanut Gym Ball) - Green - 24 Dia X 43 L (60 Cm Dia X 110 Cm L) , Inflatable Exercise Saddle Roll (Peanut Gym Ball) - Red - 28 Dia X 47 L (70 Cm Dia X 120 Cm L) , Inflatable Exercise Saddle Roll (Peanut Gym Ball) - Blue - 32 Dia X 51 L (80 Cm Dia X 130 Cm L) , Inflatable Exercise Sensi-Saddle Rolls - Yellow - 16 Dia X 35 L (40 Cm Dia Cm X 90 Cm L) , Inflatable Exercise Sensi-Saddle Rolls - Orange - 20 Dia X 39 L (50 Cm Dia X 100 Cm L) , Inflatable Exercise Sensi-Saddle Rolls - Green - 24 Dia X 43 L (60 Cm Dia X 110 Cm L) , Inflatable Exercise Straight Rolls - Yellow - 16 Dia X 35 L (40 Cm Dia X 90 Cm L) , Inflatable Exercise Straight Rolls - Orange - 20 Dia X 43 L (50 Cm Dia X 100 Cm L) , Inflatable Exercise Straight Rolls - Green - 24 Dia X 53 L (60 Cm Dia X 110 Cm L) , Donut Ball - Yellow - 18 Dia X 10 H (45 Cm Dia X 25 Cm H) , Donut Ball - Orange - 22 Dia X 12 H (55 Cm Dia X 30 Cm H) , Donut Ball - Green - 26 Dia X 14 H (65 Cm Dia X 35 Cm H) , Donut Ball - Red - 30 Dia X 16 H (75 Cm Dia X 40 Cm H) , Donut Ball - Blue - 34 Dia X 18 (85 Cm Dia X 45 Cm H) , Theraputty Standard Exercise Putty, 6 Piece Set (Tan, Yellow, Red, Green, Blue, Black), 4 Oz , Val-U-Putty Exercise Putty, 6 Piece Set, 1 Lb. , Power-Web - 14 - Level 1 - Tan , Power-Web - 14 - Level 2 - Yellow , Power-Web - 14 - Level 3 - Red , Power-Web - 14 - Level 4 - Green , Power-Web - 14 - Level 5 - Blue , Power-Web - 14 - Level 6 - Black , Power-Web Combo - 14 - Level 1 & 3 - Tan/Red , Power-Web Combo - 14 - Level 2 & 4 - Yellow/Green , Power-Web Combo - 14 - Level 3 & 5 - Red/Blue , Power-Web Combo - 14 - Level 4 & 6 - Green/Black , Power-Web Jr - 7 - Level 2 - Yellow Junior , Power-Web Jr - 7 - Level 3 - Orange Junior , Power-Web Jr - 7 - Level 3 - Red Junior , Power-Web Jr - 7 - Level 4 - Green Junior , Double Massage Ball 8Cm*16Cm , Spiky Massage Ball 6Cm , Spiky Massage Ball 7Cm , Spiky Massage Ball 8Cm , Spiky Massage Ball 9Cm , Spiky Massage Ball 10Cm , Lacrosse Foot Massager Ball - 60Mm , Lacrosse Foot Massager Ball - Peanut Roller Plain 15Cm , Lacrosse Foot Massager Ball - Peanut Roller Spiky 15Cm , Acupressure Hemisphere Massage Ball - 8Cm , 8 Hand Pump , Manual Compression Therapy Wrap Knee , Manual Compression Therapy Wrap Elbow , Manual Compression Therapy Wrap Ankle , Manual Compression Therapy Wrap Wrist , Rigid Ankle Immobilization Walker Long , Rigid Ankle Immobilization Walker Short , Semi-Rigid Ankle Immobilization Walker Long , Semi-Rigid Ankle Immobilization Walker Short , Bunion Correction Splint , Instant Hot Pack, Disposable - 5 X 7 Case Of 24 , Instant Hot Pack, Disposable - 4.5 X 9 Case Of 24 , Instant Hot Pack, Disposable - 6 X 9 Case Of 24 , Instant Cold Pack, Disposable (5.5 X 7) , Reusa/Eu/Australiable Hot/Cold Gel Pack (14Cm X 18 Cm) , Reusa/Eu/Australiable Hot/Cold Gel Pack With Adjustable Brace , Reusa/Eu/Australiable Hot/Cold Foot Ice Pack Hot Cold Therapy , Cotton Crepe Bandage 6 Cm X 4 Mtr , Cotton Crepe Bandage 8 Cm X 4 Mtr , Cotton Crepe Bandage 10 Cm X 4 Mtr , Cotton Crepe Bandage 15 Cm X 4 Mtr , Iv Cannula Fixator 4.5 Cm X 6 Cm , Plaster Of Paris Bandage 7.5 Cm X 2.7 Mtr , Plaster Of Paris Bandage 10 Cm X 2.7 Mtr , Plaster Of Paris Bandage 15 Cm X 2.7 Mtr , Plaster Of Paris Slab 10 Cm X 60 Cm , Plaster Of Paris Slab 15 Cm X 75 Cm , Plaster Of Paris Slab 15 Cm X 100 Cm , Cast Padding 10 Cm X 3 M , Cast Padding 15 Cm X 3 M , Adhesive Hospital Tube 2.5 Cm X 8 M , Adhesive Hospital Tube 5 Cm X 8 M , Adhesive Hospital Tube 7.5 Cm X 8 M , Adhesive Hospital Tube 10 Cm X 8 M , Adhesive Hospital Tube Classic 2.5 Cm X 9 M , Adhesive Hospital Tube Classic 5 Cm X 9 M , Adhesive Hospital Tube Classic 7.5 Cm X 9 M , Adhesive Hospital Tube Classic 10 Cm X 9 M , Adhesive Tape Spool 1.25 Cm X 1 M X 1 Spool , Adhesive Tape Spool 2.5 Cm X 1 M X 1 Spool , Adhesive Tape Spool 2.5 Cm X 5 M X 1 Spool , Adhesive Tape Spool 5 Cm X 5 M X 1 Spool , Adhesive Tape Spool 7.5 Cm X 5 M X 1 Spool , Adhesive Tape Spool 10 Cm X 5 M X 1 Spool , Microporus Hypoallergenic Non Woven Tape 1.25 Cm X 9 Mtr , Microporus Hypoallergenic Non Woven Tape 2.5 Cm X 9 Mtr , Microporus Hypoallergenic Non Woven Tape 5 Cm X 9 Mtr , Microporus Hypoallergenic Non Woven Tape 7.5 Cm X 9 Mtr , Microporus Hypoallergenic Non Woven Tape 10 Cm X 9 Mtr , Gamjee Roll Non Sterile 10 Cm X 2.7 M , Gamjee Roll Non Sterile 15 Cm X 2.7 M , Medicated Dressing (Band-Aid Strips) Regular 70 Mm X 19 Mm - Box(100Pcs) , Medicated Dressing (Band-Aid Strips) Wash Proof 70 Mm X 19 Mm - Box(100 Pcs) , Medicated Dressing (Band-Aid) Spot 22Mm - Box(200 Pcs) , Belladonna Plaster 17 Cm X 11 Cm , Capsicum Plaster 17 Cm X 11 Cm , Corn Cap 22 Mm X 70 Mm X 4S , Gauze Swab T-17 - 5 Cm X 5 Cm X 8 Ply , Gauze Swab T-17 - 7.5 Cm X 7.5 Cm X 8 Ply , Gauze Swab T-17 - 10 Cm X 10 Cm X 8 Ply , Paraffin Gauze Dresssing 10 Cm X 10 Cm X 1S , Paraffin Gauze Dresssing 10 Cm X 10 Cm X 10S , Paraffin Gauze Dresssing 10 Cm X 10 Cm X 20S Tin , Paraffin Gauze Dresssing 10 Cm X 30 Cm X 1S , Chlorhexidine Gauze Dresssing 10 Cm X 10 Cm X 1S , Chlorhexidine Gauze Dresssing 10 Cm X 10 Cm X 10S , Chlorhexidine Gauze Dresssing 10 Cm X 30 Cm X 1S , Combine Dressing 10 Cm X 10 Cm X 1S , Combine Dressing 10 Cm X 20 Cm X 1S , X-Ray Detectable Abdominal Pad 25 Cm X 25 Cm X 8 Ply , X-Ray Detectable Abdominal Pad 25 Cm X 40 Cm X 8 Ply , X-Ray Detectable Abdominal Pad 25 Cm X 25 Cm X 12 Ply , X-Ray Detectable Abdominal Pad 30 Cm X 30 Cm X 10 Ply , X-Ray Detectable Abdominal Pad 30 Cm X 30 Cm X 12 Ply , Plaster Of Paris Bandage 7.5 Cm X 2.7 Mtr , Plaster Of Paris Bandage 10 Cm X 2.7 Mtr , Plaster Of Paris Bandage 15 Cm X 2.7 Mtr , Kinesiology Tape , Elastic Adhesive Bandage 8 Cm X 1 Mtr , Elastic Adhesive Bandage 8 Cm X 2/3 Mtr , Elastic Adhesive Bandage 8 Cm X 4/6 Mtr - Tin , Elastic Adhesive Bandage 10 Cm X 1 Mtr , Elastic Adhesive Bandage 10 Cm X 2/3 Mtr , Elastic Adhesive Bandage 10 Cm X 4/6 Mtr-Tin , Rigid Athletic Tape 1 X 15 Yd , Rigid Athletic Tape 1.5 X 15 Yd , Rigid Athletic Tape 2 X 15 Yd , Premium Rigid Athletic Tape 1.5 X 15 Yd , Premium Rigid Athletic Tape 2 X 15 Yd , Rigid Strapping Tape 1 X 15 Yd - Brown , Rigid Strapping Tape 1 X 15 Yd - White , Rigid Strapping Tape 1.5 X 15 Yd - Brown , Rigid Strapping Tape 1.5 X 15 Yd - White , Rigid Strapping Tape 2 X 15 Yd , Economy Rigid Athletic Tape 1.5 X 15 Yd , Porous Rigid Athletic Tape 1.5 X 15 Yd , Zinc Oxide Rigid Athletic Tape 1 X 10.9 Yd , Zinc Oxide Rigid Athletic Tape 1.5 X 10.9 Yd , Zinc Oxide Rigid Athletic Tape 2 X 10.9 Yd , Rigid Cohesive Bandage 1.5 X 15 Yd , Elastic Strapping Tape 1.5 X 7.5 Yd , Lightweight Elastic Adhesive Bandage 1.5 X 7.5 Yd , Lightweight Elastic Adhesive Bandage 2 X 5 Yd , Lightweight Elastic Adhesive Bandage 2 X 7.5 Yd , Lightweight Elastic Adhesive Bandage 3 X 5 Yd , Lightweight Elastic Adhesive Bandage 3 X 7.5 Yd , Elastic Adhesive Sports Tape 2 X 7.5 Yd , Elastic Adhesive Sports Tape 3 X 7.5 Yd , High-Strength Elastic Adhesive Bandage 1 X 5 Yd , High-Strength Elastic Adhesive Bandage 2 X 5 Yd , High-Strength Elastic Adhesive Bandage 3 X 5 Yd , Elastic Adhesive Bandage 2 X 5 Yd , Elastic Adhesive Bandage 3 X 5 Yd , Elastic Adhesive Bandage 4 X 5 Yd , Cohesive Elastic Bandage 1 X 6Yd , Cohesive Elastic Bandage 2 X 6Yd , Cohesive Elastic Bandage 3 X 6Yd , Cohesive Elastic Bandage 4 X 6Yd , Cohesive Elastic Bandage 6 X 6Yd , Cohesive Compression Bandage , Cohesive Stretch Wound Compression Tape 2 X 5 Yd , Cohesive Compression Bandage 3 X 5 Yd , Plantar Fasciitis Support Tape | Reg - 7 Applications , Finger Protection Tape , Foam Underwrap Tape , Prewrap - Underwrap Paper , Adhesive Abrasion Protection Tape Roll 2 X 10 Yd , Adhesive Abrasion Protection Tape Roll 4 X 10 Yd , Adhesive Abrasion Protection Tape Roll 6 X 10 Yd , Dynamic Tape , Fixomull , Foam Padding With Adhesive , Silicon Gel Sheet , Moleskin Padding Roll - 24 X 4 5/8 , Latex-Free Moleskin - 1 X 5 Yd , Latex-Free Moleskin - 2 X 5 Yd , Silicone Scar Tape Roll - 1.6 X 60 , Medical Silicone Tape - 2Cm X 1.5Mtr , Mouthguard W/O Strap , Mouthguard With Strap , Ice Bag 9 , Cotton Roll Pack Small , Cotton Roll Pack Big , Cotton Bandage 4” , Cotton Bandage 6” , Band Aid Strips Box(100Pc) , Tape Adherant Spray , Tape Remover Spray , Skin On Skin Spenco 200Pc , Adhesive Felt Pad 5 Cm X 5 Cm (Pck Of 5) , Adhesive Felt Pad 10 Cm X 10 Cm (Pck Of 5) , Precut Adhesive Felt Pad 5 X 5 Cm With 2.5 Cm Diameter Hole (Pck Of 5) , Precut Adhesive Felt Pad 10 X 10 Cm With 4 Cm Diameter Hole (Pck Of 5) , Precut Adhesive Felt Pad 10 X 10 Cm With 5.5 Cm Diameter Hole (Pck Of 5) , Generic Scissiors – 6 Ss , Generic Scissiors – 8 Non Stick , Angled Taping Scissiors – Standard - Ss , Angled Taping Scissiors – Standard - Non Stick , Angled Taping Scissiors – Premium - Ss , Angled Taping Scissiors – Premium - Non Stick , Angled Bandage Scissors , Kinesiology Scissors , Volini Spray 60Ml , Volini Gel 30Gm , Drez Spray 40Gm , Neck & Back Pain Relief Patches Heat Wraps - 10 Count , Vicks Vaporub Chest Rub & Balm - 50Gm , Mistress Spray , Relispray Nitron Cool Spray , Deep Freeze Spray , Deep Freeze Gel , Deep Heat Spray , Deep Heat Gel , Sweatblock Antiperspirant Lotion For Hands & Feet – 50Ml , Sweat Block Antiperspirant Gel For Face – 50G , Magnesium Oil Spray , Fitogal Horse Balsam , Betadine Solution 100Ml , Betadine Oinment 20 Gm , Silverex Ionic Gel/ Soframycin - 20Gm , Sevlon Liquid 100Ml , Dettol Antiseptic Liquid - 250 Ml , Mycoderm Antiseptic Powder - 150 Gm , Instant Bleeding Stopper Powder , Steri-Strip - 6 Mm X 100 Mm, Pack Of 10 , Silicone Foam Wound Dressing 10X10cm – Sterile, Waterproof, Pack Of 5 , Spirit (Isopropyl Alcohol 99.9% Pure) - 300 Ml , Hand Sanitizer Gel - 55 Ml , Hand Sanitizer Liquid - 500 Ml , Alco Swab Alcohol Gauze Box - 100Pc , Hand Sanitizer Dispenser - 2 L , Hand Sanitizer Dispenser - 1 L , Germ Protection Wet Wipes Pack , Wet Wipes , Ultra Sound Gel - 250 Ml , Ultra Sound Gel - 5 Ltr. , Massage Cream Naqi 500Ml , Massage Cream Uk Sports , Olivia Massage Cream , Blue Nitrile Examination Gloves Box - 100Pcs , Latex Medical Examination Hand Gloves Box - 100 Pcs , Pre-Sterilized Surgical Skin Marker Set - 10Pcs , Disposable Mask Pack - 25 Pcs , Disposable Shoe Cover - 100 Pairs , Pocket Cpr Mask/Cpr Kit , Disposable Bedsheet Non-Woven Fabric (White, 35X72inch, 30 Gsm) - 100 Pcs , Tissue Paper Napkin , Toilet Tissue Roll , Reusable Non-Woven Kitchen Towels Roll , Tissue Paper Roll , Tissue Paper Napkins Pull Box , Face Tissue Box , Cloth Napkin - 45Cm X 45 Cm , Hand Towel , Body Towel , Microfiber Cleaning Cloth , Reusable Zip Lock Storage Bags - 45 Count (15 Each - S, M, L) , Eco-Friendly Garbage Bags - 1 Roll (15 Bags, 24 X 32) , Wheel Chair - Basic , Wheel Chair - Heavy Duty Steel , Wheel Chair - Premium , Powered Wheel Chair - Basic , Powered Wheel Chair - Premium , Walking Stick , Walking Stick - L Type , Walking Stick - Folding , Walking Stick - Quadripod , Walking Stick - Tripod , Elbow Crutch - Adjustable , Axillary Crutch (Pair) , Walker - Basic , Walker - Premium , Walker - Front Wheels , Hernia Belt , Stockinette 10Mtr - 5Cm , Stockinette 10Mtr - 7.5Cm , Stockinette 10Mtr - 10Cm , Stockinette 10Mtr - 12.5Cm , Stockinette 10Mtr - 15Cm , Compression Sleeve - Arm , Compression Sleeve - Calf And Shin , Compression Sleeve - Thigh , Air Mattress , Finger Cot Splint , Thumb Spika , Scortal Support , Silicone Heel Gel Sleeve Pair , Soft Gel Finger Tube (Length 6 X Diameter-0.59) , Heel & Lace Pads Box - 2000 Pcs , Silicone Foot Arch Support , Sitting Wedge , Analogue Upper Arm Blood Pressure Monitor , Oconnor Tweezer Dexterity Test By Oconnor , Distance Measuring Laser Tool – 150M , Distance Measuring Laser Tool – 100M , Distance Measuring Laser Tool – 50M , Kestrel Pocket Wind Meter , Babinski Reflex Hammer , Lactate Testing Kit , Lactate Test Strips - 25 , Moist Pack Set (4Pcs) , Reusa/Eu/Australiable Hot And Cold Ice Gel Pack With Adjustable Strap , Hydrocollator Unit , Cupping Set , Mini Pedal Exerciser With Resistance Adjustment & Digital Display , 40 Foldable Trampoline Rebounder , 45” Trampoline Rebounder With Adjustable Handle , 50 Trampoline Rebounder With Adjustable Handle , Jumping Trampoline With Enclosure Net - 16 Ft. , Exercise Gym Ball Base With Resistance Band Handle , Portable Hand Pump , Portable Foot Pump , Balance Pods , Sport Balance Trainer , Exercise Balance Pad , Hot And Cold Eyes Mask , Cool Eyes , Adjustable Aerobic Stepper , Mulligan Mobilization Belt , Peripheral Drop , Chiropractic Adjusting Tool - Standard , Chiropractic Adjusting Tool - Expert , Chiropractic Adjusting Tool - Pro Select , Vicks Inhaler , Candid Dusting Powder - 250 Gm , Candid Activ Talc - 100 Gm , Disposable Manual Shaving Razor - 10 Pcs Pack , Coagulant Spray , Battery 1.5V Aa , Battery 1.5V Aaa , Battery 9V , Torch Light , Emergency Rechargeable Led Lantern , Hair Dryer , Mosquito Bat , Hit Spray Flying Insect Killer , Room Spray , Velcro Straps Set (Small, Medium, Large) , Whistles With Lanyard , Compass For Directions , Silicone Ice Tray , Olive Oil – 1L , Olive Oil – 5L , Paraffin Wax (Slab) – 1 Kg , Paraffin Wax (Pellets) – 500Gm , Podiatry Kit , Oxygen Concentrator - 5Lpm , Portable Oxygen Can Pack - 6L With Mask, Tube & Elastic Strap , Yoga Mat 4Mm , Yoga Mat 6Mm , Yoga Mat 8Mm , Yoga Mat 10Mm , Gym Mat - 6 Mm - 36”X75” , Foam Roller (12) , Foam Roller (18) - Plain , Foam Roller (18) - Textured , Foam Roller (36) , Foam Roller Half Round (36) , Foot Roller Green Apac , Green Roller Massager , Portable Roller Massager , Yoga Belt / Strap - White , Yoga Block / Bricks Eva - Big 6 X 9 X 3 , Yoga Block / Bricks - Small 4 X 9 X 3 , Wooden Massager Stick - 10 Beads , Wooden Massager Stick - 20 Beads , Peanut Shaped Massage Ball , Wooden Body Massager With Accu Wheels , Wooden 6 Ball Pain Relife Roller , 4 Wheel Wooden Soft Roller , Acupressure Wooden Ball , Acupressure Wooden Roller - Big , Acupressure Wooden Roller - Small , Kansya Wand Wooden Massager Jimmy - Big Bronze , Kansya Wand Wooden Massager Jimmy - Small Bronze , Bolster , Acupressure Beak Roller - Wooden , Acupressure Beak Roller - Plastic , Acupressure Mat Block - Wooden , Acupressure Mat Block - Super With Copper , Acupuncture Needles With Tube 13Mm , Acupuncture Needles With Tube 25Mm , Acupuncture Needles With Tube 40Mm , Acupuncture Needles With Tube 50Mm , Acupuncture Needles With Tube 60Mm , Acupuncture Needles With Tube 75Mm , Acupuncture Needles With Tube 100Mm , Acupuncture Needles With Tube 125Mm , Foam Plyometric Box (20 X 24 X 30) , Foam Plyometric Box Set Of 4 (6, 12, 18, 24) , Wooden Plyometric Box S (12 X 14 X 16) , Wooden Plyometric Box M (16 X 20 X 24) , Wooden Plyometric Box L (20 X 24 X 30) , Wobble Board For Standing Anti-Fatigue Foam Pad , Wobble Wooden Balance Board - Circular , Rocker Wooden Balance Board - Rectangular - 180* , Rocker Wooden Balance Board - Rectangular - 360* , Balance Board Trainer Wooden - Skate , Interlocking Exercise Foam Mats -120Sqft (30Tile) , Rubber Tile 20 X 20 X 10Mm , Rubber Tile 20 X 20 X 20Mm , Exercise Mat - 25Mm X 75Cm X 180Cm , Gym Mat - 50Mm X 90Cm X 180Cm , Combat Mat - 55Mm X 2 Mtr X 1 Mtr , Crash Mat - 18 X 6’ X 4’ , Dumbbell Vinyl - 0.5 Kg , Dumbbell Vinyl - 1 Kg , Dumbbell Vinyl - 1.5 Kg , Dumbbell Vinyl - 2 Kg , Dumbbell Vinyl - 3 Kg , Dumbbell Vinyl - 4 Kg , Dumbbell Vinyl - 5 Kg , Dumbbell Vinyl - 7.5 Kg , Dumbbell Vinyl - 10 Kg , Medicine Ball - 1Kg , Medicine Ball - 2Kg , Medicine Ball - 3Kg , Medicine Ball - 4Kg , Medicine Ball - 5Kg , Medicine Ball - 6Kg , Medicine Ball - 7Kg , Medicine Ball - 8Kg , Medicine Ball - 9Kg , Medicine Ball - 10Kg , Weight Cuff - 0.5 Kg , Weight Cuff - 1 Kg , Weight Cuff - 1.5 Kg , Weight Cuff - 2 Kg , Weight Cuff - 3 Kg , Weight Cuff - 4 Kg , Weight Cuff - 5 Kg , Rack For 6 Dumbbell Vinyls , Rack For 6 Medicine Balls , Adjustable Kettlebell With 6 Plates (5 Lbs Each) , Kettlebell Rack - 49?X19?X40? - Capacity 350Kg , Kettlebell - 2 Kg , Kettlebell - 4 Kg , Kettlebell - 6 Kg , Kettlebell - 8 Kg , Kettlebell - 12 Kg , Kettlebell - 16 Kg , Kettlebell - 20 Kg , Kettlebell - 24 Kg , Kettlebell - 28 Kg , Kettlebell - 32 Kg , Kettlebell - 40 Kg , Index Knobber W/ Cone , Index Knobber W/ Cap , Index Knobber W/ Ball , Index Knobber Pressure Tool Set (Wood) , Index Knobber Ii , Knobble , Knobble Ii , Jacknobber , Jacknobber Ii , Backnobber , Backnobber Ii , Vibrassager , Palmassager , Orbitmassager , Intraoral Tmj Trigger Point Release Tool , Hip Wrap With Hot/Cold Therapy And Trigger Point Massage , Knee Joint Model With Flexible Ligaments , Hip Joint Model With Ligaments , Shoulder Joint Model With Ligaments , Foot Joint Model With Ligaments , Hand Joint Model With Ligaments , Human Joint Models Set Of 5 - (Knee, Hip, Shoulder, Foot, Hand) , Elbow Joint Model With Ligaments , Human Spine Model With Pelvis, Nerves & Stand – Flexible With Herniated Disc , Ice Box - 4.5L , Ice Box - 26L , Ice Box - 28L , Ice Box - 45L , Ice Box - 49L , Ice Box - 52L , Ice Box - 66L , Ice Box - 10L Bag , Ice Box - 47L With Wheels , Ice Box - 56L With Wheels , Ice Box - 61L With Wheels , Ice Box - 94L With Wheels , Compact Ppe Waist Pack , Athletic Trainer Waist Pack , Modular Storage Pack , Sideline Sling Response Bag , Large Modular Storage Pack , Medical Utility Bag , Emergency Response Medical Bag , Athletic Trainer Briefcase , Compact Medical Supply Bag , Medium Medical Supply Bag , Athletic Trainer Shoulder Bag , Premium Medical Supply Bag , Versatile Medical Response Bag , Customizable Large Medical Bag , Large Multi-Use Roller Bag , Medical Device Roller Bag , Large Medical Supply Bag , Extra-Large Medical Supply Bag , Mat - Foldable Ruler , Functional Hop Test And Jump Assessment Mat – 600Cm × 20Cm , Functional Movement & Balance Assessment Mat – Sebt, Ybt, Ckcue, Wblt, Squat & Lunge Testing Tool , Hand Evaluation - 3-Piece Set - Features Lite 200 Lb Hydraulic Hand Dynamometer & 50 Lb Hpg , Hand Evaluation - 7-Piece Set - Features Lite 200 Lb Hydraulic Hand Dynamometer & 30 Lb Mpg , Hand Evaluation - 3-Piece Set - Features Standard 200 Lb Hydraulic Hand Dynamometer & 50 Lb Hpg , Hand Evaluation - 3-Piece Set - Features Hires, Large Head, Hand Evaluation Set (Dyna, Pinch, Gonio) , Hand Evaluation - 7-Piece Set - Features Digital Lcd Er 300 Lb Hydraulic Hand Dynamometer & 60 Lb Mpg , Wrist Evaluation - 4-Piece Set - Features 500 Lb , Hand Evaluation - 3-Piece Set - Features Hd 200 Lb Hydraulic Hand Dynamometer & 50 Lb Hpg , Hand Evaluation - 7-Piece Set - Features Hd 200 Lb Hydraulic Hand Dynamometer & 30 Lb Mpg , Hand Evaluation - 8-Piece Set - Sensory Evaluators (Baseline/Touch-Test) , Hand Evaluation - 8-Piece Set - Features Lite 200 Lb Hydraulic Hand Dynamometer & 50 Lb Hpg , Hand Evaluation - 8-Piece Set - Features Hd 200 Lb Hydraulic Hand Dynamometer & 50 Lb Hpg , Hand Evaluation - 8-Piece Set - Features Standard 200 Lb Hydraulic Hand Dynamometer & 50 Lb Hpg , Hand Evaluation - 8-Piece Set - Sensory Evaluators , Pinch Gauge - Mechanical - Blue - 30 Lb Capacity , Pinch Gauge - Mechanical - Red - 60 Lb Capacity , Pinch Gauge - Mechanical - Gold - 2 Lb Capacity , Pinch Gauge - Mechanical - Silver - 10 Lb Capacity , Hand Dynamometer - Hd - 200 Lb Capacity , Pinch Gauge - Hydraulic - Hd - 50 Lb Capacity , Pinch Gauge - Hydraulic - Lite - 50 Lb Capacity , Pinch Gauge - Hydraulic - Hires Gauge - Er 100 Lb , Pinch Gauge - Hydraulic - Standard - 50 Lb Capacity , Pinch Gauge - Hydraulic - Digital Lcd Gauge - Er , Pinch Gauge - Hydraulic - 100 Lb Analog Output , Pinch Gauge - Hydraulic - Hires Gauge - 50 Lb , Hand Dynamometer - Standard - 200 Lb Capacity , Hand Dynamometer - Lite - 200 Lb Capacity , Hand Dynamometer - Hires Gauge - 200 Lb , Hand Dynamometer - Hires Gauge - Er 300 Lb , Hand Dynamometer - Digital Lcd Gauge - Er 300 Lb , Hand Dynamometer - 300 Lb Analog Output Signal, , Wrist Dynamometer - Analog 500 Lb Capacity, With Knob Grip & Mount Bracket , Wrist Dynamometer - Digital Lcd 500 Lb Capacity, With Knob Grip & Mount Bracket , Hand Dynamometer - Accessory - Case Only For Standard And Digital Gauge , Hand Dynamometer - Accessory - Case Only For , Wrist Dynamometer - Accessory - Knob Grip Handle , Wrist Dynamometer - Accessory - Shovel Handle , Wrist Dynamometer - Accessory - Lever Handle , Wrist Dynamometer - Accessory - Rod Handle , Wrist Dynamometer - Accessory - Mounting Bracket For Tabletop Or Wall , Wrist Dynamometer - 500 Lb Capacity Analog Output Signal, No Gauge , Hand Dynamometer - Standard 200 Lb Capacity - Reverse Gauge Exercise/Feedback Model , Pinch Gauge - Hydraulic - Standard - 50 Lb Capacity - Reverse Facing Gauge , Smedley Spring Dynamometer, Adult, 220 Lb. , Smedley Spring Dynamometer, Child, 110 Lb. , Smedley Digital Hand Dynamometer , Dynamometer - Pneumatic Squeeze Bulb - 30 Psi Capacity, No Reset , Dynamometer - Pneumatic Squeeze Bulb - 30 Psi Capacity, With Reset , Dynamometer - Pneumatic Squeeze Bulb - 15 Psi Capacity, No Reset , Dynamometer - Pneumatic Squeeze Bulb - 15 Psi Capacity, With Reset , Dynamometer - Pneumatic 3-Bulb Combo Kit - 30 Psi Capacity, With Reset , Manual Muscle Tester - Mechanical - Includes 3 Push, 2 Pull Attachments - 2.2 Lb Capacity , Manual Muscle Tester - Mechanical - Includes 3 Push, 2 Pull Attachments - 5 Lb Capacity , Manual Muscle Tester - Mechanical - Includes 3 Push, 2 Pull Attachments - 10 Lb Capacity , Manual Muscle Tester - Mechanical - Includes 3 Push, 2 Pull Attachments - 60 Lb Capacity , Manual Muscle Tester - Mechanical - Includes 3 Push, 2 Pull Attachments - 22 Lb Capacity , Manual Muscle Tester - Electronic - Includes 3 Push, 2 Pull Attachments - 50 Lb Capacity , Manual Muscle Tester - Electronic - Includes 3 Push, 2 Pull Attachments - 100 Lb Capacity , Manual Muscle Tester - Electronic - Includes 3 Push, 2 Pull Attachments - 250 Lb Capacity , Manual Muscle Tester - Electronic - Includes 3 Push, 2 Pull Attachments - 500 Lb Capacity , Gauge Tester With Push-Pull Dynamometer , Manual Muscle Tester - Accessory - Small Curved Push Pad , Manual Muscle Tester - Accessory - Straight Push Pad , Manual Muscle Tester - Accessory - Large Curved Push Pad , Manual Muscle Tester - Accessory - Small Flat Circular Push Tip , Manual Muscle Tester - Accessory - Small Pull Hook , Manual Muscle Tester - Accessory - Medium Pull Hook , Manual Muscle Tester - Accessory - Threaded Oval Spring Hook , Manual Muscle Tester - Accessory - Single Grip Handle , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Digital Lcd Gauge - 500 Lb Capacity , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Analog Gauge - 500 Lb Capacity , Manual Muscle Tester - Accessory - Dual Grip Handle (Also For Wrist , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Analog Gauge - 50 Lb Capacity , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Analog Gauge - 100 Lb Capacity , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Analog Gauge - 250 Lb Capacity , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Digital Lcd Gauge - 50 Lb Capacity , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Digital Lcd Gauge - 100 Lb Capacity , Manual Muscle Tester - Hydraulic - Includes 3 Push, 2 Pull Attachments - Digital Lcd Gauge - 250 Lb Capacity , Back-Leg-Chest Dynamometer - Standard Platform - 660 Lb Capacity , Back-Leg-Chest Dynamometer - Standard Platform - 330 Lb Capacity , Back-Leg-Chest Dynamometer - Standard Platform - 165 Lb Capacity , Back-Leg-Chest Dynamometer - Oversize Platform - 660 Lb Capacity , Back-Leg-Chest & Manual Muscle Tester Accessory - Standard Lifting , Back-Leg-Chest & Manual Muscle Tester Accessory - Oversize Lifting , Cable Tensiometer - 660 Lb Capacity , Cable Tensiometer - 330 Lb Capacity , Cable Tensiometer - 165 Lb Capacity , Manual Muscle Tester - Accessory - Single Grip , Manual Muscle Tester - Accessory - Ankle Cuff , Manual Muscle Tester - Accessory - Thigh Cuff , Manual Muscle Tester - Accessory - Wrist Cuff , Manual Muscle Tester - Accessory - Shoulder Harness , Back-Leg-Chest Dynamometers Accessory - Lifting Chain, 1 Foot Length , Back-Leg-Chest & Manual Muscle Tester Accessory - Snap Oval For Lifting Platform , Back-Leg-Chest & Manual Muscle Tester Accessory - Threaded Oval For Manual Muscle Tester Connection , Manual Muscle Tester - Accessory - 7-Piece Pack With 3 Push And 4 Pull Accessories , Electronic Pinch Gauge , Pinch Gauge - Hydraulic - 5-Level Pinch Clinic Mode - 50 Lb Capacity , Pinch Gauge - Hydraulic - 5-Level Pinch Feedback Mode - 50 Lb Capacity , Wrist Inclinometer , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Push Attachments Only , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Dual Handle Only , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Lite Hydraulic Hand Dynamometer With Push , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Standard Hydraulic Hand Dynamometer With Push , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Hd Hydraulic Hand Dynamometer With Push , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Lite Hydraulic Hand Dynamometer With Push Attachments And Dual Handle , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Standard Hydraulic Hand Dynamometer With Push Attachments And Dual Handle , Hydraulic Hand Dynamometer To Manual Muscle Tester Combo - Hd Hydraulic Hand Dynamometer With Push Attachments And Dual Handle , Wall Growth Chart , Plastic Goniometer - 360 Degree Head - 12 Inch , Plastic Goniometer - 360 Degree Head - 8 Inch , Plastic Goniometer - 360 Degree Head - 6 Inch , Plastic Goniometer - Pocket Style - 180 Degree , Plastic Goniometer - Rulongmeter Style - 360 Degree Head - 6 Inch Arms , Finger Goniometer - Metal - Standard - 6 Inch , Finger Goniometer - Metal - Deluxe - 6 Inch , Plastic Goniometer - Finger - Flexion To Hyper- , Finger Goniometer - Plastic - 1-Finger Design - 6 , Finger Goniometer - Metal - Small - 3.5 Inch , Finger Goniometer - Metal - 1-Finger Design - 6 Inch , Metal Goniometer - 180 Degree Range - 18 Inch , Plastic Absolute+Axis Goniometer - 360 Degree Head - 12 Inch Arms , Plastic Absolute+Axis - Attachment Only For 12 Inch , Metal Absolute+Axis Goniometer - Digital 180 Degree Range, 9 Inch Arms , Plastic Goniometer - 6-Piece Set , Hi-Res Measuring Set (1 Ea: 8, 12 360 Goniometer, 6 Pocket Goniometer, 60 Tape) , X-Ray Radiopaque Goniometer - 180 Degree Range - , X-Ray Radiopaque Goniometer - 180 Degree Range - , X-Ray Radiopaque Goniometer - 180 Degree Range - , Metal Goniometer - 180 Degree Range - 8 Inch Legs , Metal Goniometer - 180 Degree Range - 14 Inch , Metal Goniometer - 180 Degree Range - 6 Inch Legs - , Metal Goniometer - 6-Piece Set , Digital Plastic 360 Degree 10 Inch Goniometer , Metal Goniometer - 360 Degree Range - 14 Inch , Gravity Inclinometer , Bubble Inclinometer , Digital Inclinometer , Functional Finger Motion Gauge , Universal Inclinometer With Clip , Universal Inclinometer With Headband , Large Joint Protractor , Posture Evaluation - 2-Piece Set - Evaluator And , Posture Evaluator , Posture Grid , Posture Evaluation - 3-Piece Set - Protractor, , Sit N Reach Trunk Flexibility Box , Sit N Reach Trunk Flexibility Box - Deluxe , Body Level , Scoliosis Meter - Metal , Isom Measurement Chart , Adjustable Wall Goniometer , Scoliosis Meter - Plastic Economy , Medical Skinfold Caliper , Economy Plastic Skinfold Caliper , Skinfold Caliper - Accessory - Calibration Block Only , Economy Plastic Skinfold Caliper, Slim-Guide Style , Medical Skinfold Caliper - Deluxe Dual-Sided Model , Hand-Held Body Fat Monitor (Metric Only) , Hand-Held Body Fat Analyzer - Palm-Size - Baseline , Credit-Card Style Body Fat Analyzer , Acuangle Adjustable-Feet Inclinometer , Scale - Body Fat Scale , Measurement Tape With Gulick Attachment, 60 Inch , Measurement Tape With Gulick Attachment, 72 Inch , Measurement Tape With Gulick Attachment, 120 , Measurement Tape With Hands-Free Attachment, , Measurement Tape, 60 Inch , Measurement Tape, 72 Inch , Measurement Tape, 120 Inch , Finger Circumference Gauge, 6 Inch Maximum , Finger Circumference Gauge, 15 Cm Maximum , Finger Circumference Gauge, 6 Inch / 15 Cm , Multi-Filament Pen, 4 Monofilament Sizes , Monofilament - Retracting Filament - 1 Gram , Monofilament - Retracting Filament - 10 Gram , Monofilament - Retracting Filament - 100 Gram , Monofilament - Retracting Filament - 3-Piece Set (1,10 And 100 Gram) , Folding Monofilament, 1 Gram , Folding Monofilament, 10 Gram , Folding Monofilament, 100 Gram , Folding Monofilament, 3-Piece Set (1, 10, 100) , Dolorimeter - 2 Pound Capacity , Dolorimeter - 5 Pound Capacity , Dolorimeter - 22 Pound Capacity , Dolorimeter - 60 Pound Capacity , Dolorimeter - 10 Pound Capacity , Cleanwheel Sterile Disposable Neurological , Cleanwheel Non-Sterile Disposable Neurological , Aesthesiometer - Plastic - 2-Point Discriminator , Aesthesiometer - Plastic - 2-Point Discriminator , Aesthesiometer - Stainless Steel - 2-Point , 2-Point Disk-Criminator, 2 Disk Set, Metal Tips , 2-Point Discrim-A-Gon, 2 Disk Set, Plastic Tips , Multi-Setting Two-Point Discriminator , Tactile Monofilament - Protective Case - 2 , Tactile Monofilament - Protective Case - 6 , Tactile Monofilament - Protective Case - 24 , Tactile Monofilament - 2-Piece Set - Normal - 2.83, , Tactile Monofilament - 5-Piece Set - Hand - 2.83, 3.61, 4.31, 4.56, 6.65 Gram , Tactile Monofilament - 6-Piece Set - Foot - 2.83, 3.61, 4.31, 4.56, 5.07, 6.65 Gram , Tactile Monofilament - 20-Piece Set - Complete , Tactile Monofilament - 2-Piece Set - Protective Sensation - 4.56, 5.07 Gram , Tactile Monofilament - Leap Program - Disposable - 5.07 - 10 Gram - Single Unit , Tactile Monofilament - Ada Program - Disposable - 5.07 - 10 Gram - Single Unit , Windmill Type Spirometer , Accessory - 100 Plastic Mouthpieces , Accessory - 500 Paper Mouthpieces , Accessory - 1000 Paper Mouthpieces , Accessory - 250 Paper Mouthpieces , Fold-Up Monofilament, Evaluator Hand Set With Case (Set Of 5: 2.83, 3.61, 4.31, 4.56, 6.65) , Fold-Up Monofilament, Evaluator Foot Set With Case (Set Of 6: 2.83, 3.61, 4.31, 4.56, 5.07, 6.65) , Fold-Up Monofilament, Evaluator Set With Case (Set Of 20: 1.65 Through 6.65) , Fold-Up Monofilament, Normal Limit Set , Fold-Up Monofilament, Protective Sensation (Set) , Fingertip Pulse Oximeter, Standard , Fingertip Pulse Oximeter, Deluxe , Fingertip Pulse Oximeter, Pediatric , Fingertip Pulse Oximeter, Taa Compliant , Lite Pedometer, Step Only, Includes Strap , Standard Pedometer, Step, Distance & Calorie , Deluxe Pedometer, Step, Distance, Calorie, Activity Time, Includes Strap , Bims Digital 5-Position Grip Dynamometer, Clinic , Bims Digital 5-Position Grip Dynamometer, Deluxe , Bims Digital 5-Position Pinch Dynamometer, Clinic , Bims Digital 5-Position Pinch Dynamometer, Deluxe , Bims Digital 5-Position Dynamometer, 3-Piece Hand Evaluation Set, Clinic Model , Bims Digital 5-Position Dynamometer, 3-Piece Hand Evaluation Set, Deluxe Model , Bims Digital 5-Position Dynamometer, 3-Piece Hand Evaluation Set, Functional Model , Hand Dynamometer - 300 Lb Dial Gauge And Analog , Pinch Gauge - Hydraulic - 50 Lb Dial Gauge And Analog Output Signal , Wrist Dynamometer - 500 Lb Capacity Dial Gauge & Analog Output Signal , 24-Hour Combination Stopwatch/Clock , Wristwatch Blood Pressure And Pulse Monitor , Electronic Blood Pressure Monitor , 9 Hole Pegboard , Volumetric Measuring Device - Hand Set, 3X5x9 Inch , Volumetric Measuring Device - Arm Set, 7X7x30 Inch , Volumetric Measuring Device - Foot Set, 5X13x9 Inch , Volumetric Measuring Device - Forearm Set, 6X6x24 , Volumetric Measuring Device - Partial Leg Set , Volumetric Measuring Device - Large Partial Leg Set, 8X13x16 Inch Cavity , Pinch Gauge - Hydraulic - 5-Level Pinch - Additional , Plastic Goniometer - Hires 360 Degree Head - 12 , Plastic Goniometer - Hires 360 Degree Head - 8 , Plastic Goniometer - Hires 360 Degree Head - 6 , Plastic Goniometer - Pocket Style - Hires 180 Degree Head - 6 Inch Arms , Plastic Goniometer - Rulongmeter Style - Hires 360 Degree Head - 6 Inch Arms , Plastic Goniometer - Finger - Hires Flexion To Hyper- , Plastic Absolute+Axis Goniometer - Hires 360 Degree Head - 12 Inch Arms , Plastic Goniometer - Hires 6-Piece Set , Xtender Hires 360 Isom Goniometer , Tactile Monofilament - Ada/Leap/Lops - Disposable W/Sleeve - 5.07 - 10 Gram - 1 Ea. , Monitor Exercise Feedback Device , Digital Timer , Whey Gold - 100% Whey Protein Isolate - 30G Protein Per Serving - 1Kg , Whey Gold - 100% Whey Protein Isolate - 30G Protein Per Serving - 2Kg , Whey Gold - 100% Whey Protein Isolate - 30G Protein Per Serving - 4Kg , Whey Protein - Ultra Premium Whey Blend - 25G Protein Per Serving & 5.5G Bcaa - 1Kg , Whey Protein - Ultra Premium Whey Blend - 25G Protein Per Serving & 5.5G Bcaa - 1.8Kg , Whey Protein - Ultra Premium Whey Blend - 25G Protein Per Serving & 5.5G Bcaa - 2Kg , Whey Protein - Ultra Premium Whey Blend - 25G Protein Per Serving & 5.5G Bcaa - 4Kg , Biozyme Iso Zero Low Carb - 27G Protein Per Serving - 1Kg , Biozyme Iso Zero Low Carb - 27G Protein Per Serving - 2Kg , Biozyme Iso Zero Low Carb - 27G Protein Per Serving - 4Kg , Biozyme Performance Whey- 25G Protein Per Sachet - Box Of (5 X 36Gm Sachet) , Biozyme Performance Whey - 25G Protein Per Serving - 1Kg , Biozyme Performance Whey - 25G Protein Per Serving - 2Kg , Biozyme Performance Whey - 25G Protein Per Serving - 4Kg , Biozyme Whey Protein - 25G Protein Per Serving - 1Kg , Biozyme Whey Protein - 25G Protein Per Serving - 2Kg , Biozyme Whey Protein - 25G Protein Per Serving - 4Kg , Biozyme Gold - 26G Protein Per Serving - 1Kg , Biozyme Gold - 26G Protein Per Serving - 2Kg , Biozyme Whey Pr - 30G Protein Per Serving - 1Kg , Biozyme Whey Pr - 30G Protein Per Serving - 2Kg , Fuel One - Lean Muscle Mass - 24G Protein Per Serving - No Maltodextrin - 1Kg , Fuel One - Lean Muscle Mass - 24G Protein Per Serving - No Maltodextrin - 2Kg , Raw Whey Protein 80% - 24G Protein Per Serving - 1Kg , Raw Whey Protein 80% - 24G Protein Per Serving - 2Kg , Raw Whey Protein 80% - 24G Protein Per Serving - 4Kg , Whey Performance - 24G Protein Per Serving - 13 Rich Vitamins - 1Kg , Whey Performance - 24G Protein Per Serving - 13 Rich Vitamins - 2Kg , Whey Performance - 24G Protein Per Serving - 13 Rich Vitamins - 4Kg , 100% Micellar Casein - 24G Protein Per Serving, 5.6G Bcaa - 1Kg , 100% Micellar Casein - 24G Protein Per Serving, 5.6G Bcaa - 2Kg , Whey Energy - 24G Protein Per Serving, No Added Sugar - 1Kg , Whey Energy - 24G Protein Per Serving, No Added Sugar - 2Kg , Biozyme Clear Whey Isolate - 20G Protein Per Serving - 540Gm , 20G Protein Bar - Pack Of 6 , 10G Protein Bar - Pack Of 6 , High Protein Gold Gainer - 27G Protein Per Serving, Mass Gainer, No Added Sugar - 1Kg , High Protein Gold Gainer - 27G Protein Per Serving, Mass Gainer, No Added Sugar - 3Kg , High Protein Gold Gainer - 27G Protein Per Serving, Mass Gainer, No Added Sugar - 5Kg , Weight Gainer - 12G Protein Per Serving, Combination Of Proteins, Carbohydrates And Fats - 1Kg , Weight Gainer - 12G Protein Per Serving, Combination Of Proteins, Carbohydrates And Fats - 2Kg , Weight Gainer - 12G Protein Per Serving, Combination Of Proteins, Carbohydrates And Fats - 3Kg , Weight Gainer - 12G Protein Per Serving, Combination Of Proteins, Carbohydrates And Fats - 5Kg , Carb Blend - 72G Carbs Per Serving, Balanced Glycogen - 3Kg , Bulk Gainer - 17.6G Protein Per Serving, 27 Vitamins And Minerals - 1Kg , Bulk Gainer - 17.6G Protein Per Serving, 27 Vitamins And Minerals - 3Kg , Bulk Gainer - 17.6G Protein Per Serving, 27 Vitamins And Minerals - 5Kg , Mass Gainer Xxl - 18G Protein Per Serving - 1Kg , Mass Gainer Xxl - 18G Protein Per Serving - 2Kg , Mass Gainer Xxl - 18G Protein Per Serving - 3Kg , Mass Gainer Xxl - 18G Protein Per Serving - 5Kg , Super Gainer Black - 12G Protein Per Serving, Digestion & Testo Blend - 1Kg , Super Gainer Black - 12G Protein Per Serving, Digestion & Testo Blend - 2Kg , Super Gainer Black - 12G Protein Per Serving, Digestion & Testo Blend - 3Kg , Super Gainer Black - 12G Protein Per Serving, Digestion & Testo Blend - 5Kg , Fuel One Max Gainer - 1Kg , Fuel One Max Gainer - 3Kg , Biozyme 5 In 1 Multivitamin - 90 Tabs , Testo Surge Black - 60 Tabs , Testo Surge Black - 90 Tabs , Mb-Vite Daily Multivitamin - 30 Tabs , Mb-Vite Daily Multivitamin - 60 Tabs , Mb-Vite Daily Multivitamin - 90 Tabs , Mb-Vite Daily Multivitamin - 120 Tabs , Fish Oil (1000 Mg) - 30 Capsules , Fish Oil (1000 Mg) - 60 Capsules , Fish Oil (1000 Mg) - 90 Capsules , Fish Oil (1000 Mg) - 120 Capsules , Fish Oil (1000 Mg) - 180 Capsules , Fish Oil Gold - 3X Strength - 60 Capsules , Strongher Women Multivitamin - 60 Tabs , Zma - 60 Tabs , L-Arginine - 90 Capsules , Wrathx Pump - 300Gm , Pre Workout Wrathx - 340Gm , Pre Workout Wrathx - 510Gm , Pre Workout 200 Extreme - 3000Mg L-Citrulline, 2000Mg Beta Alanine - 100Gm , Pre Workout 200 Extreme - 3000Mg L-Citrulline, 2000Mg Beta Alanine - 200Gm , Pre Workout Crea Xtreme - 200Gm , Pre-Workout Ripped - 250Gm , Pre Workout Alter Ego - 250Gm , Pre -Workout 200 - 100Gm , Bcaa 2:1:1 Ratio 5000Mg Power - Box Of (7Gm X 28 Sachets) , Bcaa Pro - 240Gm , Bcaa Pro - 250Gm , Bcaa Pro - 450Gm , Bcaa Pro - 500Gm , Bcaa Gold - 450Gm , Creatine Monohydrate - 100Gm , Creatine Monohydrate - 250Gm , Creatine Monohydrate - 280Gm , Creatine Monohydrate - 400Gm , Creapro - 100Gm , Creapro - 250Gm , Citrulline Malate - 100Gm , Eaa 8000 - 340Gm , Eaa 6000 - 250Gm , One Sports Hydra 8 - Rehydration Formula - 5 Electrolytes, Bcaas, Vitamin C And Zinc - 15Tabs , One Sports Hydra 8 - Rehydration Formula - 5 Electrolytes, Bcaas, Vitamin C And Zinc - 20Tabs , One Sports Hydra 8 - Rehydration Formula - 5 Electrolytes, Bcaas, Vitamin C And Zinc - 60Tabs , Sports Energy Gel - 500 Mg Electrolytes, 75 Mg Caffeine, 85 Kcal - 35Gm - Pack Of 5 , Energy Bars - 200Kcal - Pack Of 6 X 40G , L-Glutamine - 5G Of Glutamine Per Serving - 250Gm , Hydr8 Isotonic - Instant Energy Boost, Rapid Rehydration, Faster Recovery - 1Kg , Liquid L-Carnitine - Boosts Cellular Energy, Fat Metabolism & Weight Management - 300Ml , Liquid L-Carnitine - Boosts Cellular Energy, Fat Metabolism & Weight Management - 450Ml , Liquid Carnitine Pro - Triple The Strength, Enhanced Fat Metabolism - 450Ml , Mb Fat Burner Pro - Convert Fat Into Energy, Suppresses Appetite, Boosts Natural Weight Loss - 60 Tablet , Cla 1000 Fat Burner (Conjugated Linoleic Acid Soft Gelatin Capsules) - 90 Capsules , L-Carnitine L-Tartrate - 30 Capsules , L-Carnitine L-Tartrate - 60 Capsules , L-Carnitine L-Tartrate - 90 Capsules , Biozyme Shred - 90 Capsules , Bottle Pro, 2 L , Cyclone Shaker, 700 Ml , Stainless Steel Shaker, 750 Ml , Insulated Steel Bottle, 1 L , Mens Multivitamin – 30 Tablets , Mens Multivitamin – 60 Tablets , Womens Multivitamin – 30 Tablets , Womens Multivitamin – 60 Tablets , Essential Multivitamin – 30 Tablets , Odourless Wild Fish Oil 1500Mg – 40 Capsules , Odourless Wild Fish Oil 1500Mg – 60 Capsules , Odourless Wild Fish Oil 1500Mg – 90 Capsules , Odourless Wild Fish Oil 1500Mg – 200 Capsules , Odourless 4X Strength Wild Fish Oil 1800Mg – 60 Capsules , Odourless Wild Fish Oil 1000Mg – 150 Soft Capsules , Odourless Wild Fish Oil 1000Mg – 200 Soft Capsules , Clinical Strength Deep Sea Krill Oil – 30 Capsules , Collagen+ Hyaluronic Acid – 30 Tablets , Collagen Glow Powder – 90G Oral Powder , Vegan Collagen Builder – 30 Tablets , Biotin+ – 30 Tablets , Biotin+ – 60 Tablets , Glutathione+ – 30 Soft Capsules , High Strength Cranberry – 30 Capsules , Iron – 30 Tablets , Mens Endurance Boost – 30 Tablets , Magnesium – 60 Tablets , High Strength Magnesium Glycinate & Citrate – 90G Oral Powder , Magnesium, Calcium + D3 – 60 Tablets , Vitamin D – 90 Tablets , Vegan Calcium + Vitamin D – 60 Tablets , Calcium + Vitamin D – 90 Tablets , Heart Health – 30 Soft Capsules , Co Enzyme Q10 – 50 Capsules , Joint Repair – 60 Tablets , Glucosamine Sulfate+ – 60 Tablets , Liver Detox – 30 Tablets , Liver Detox – 60 Tablets , High Strength Milk Thistle – 30 Tablets , Lutein & Zeaxanthin Eye Health+ – 30 Tablets , Metabolism+ – 60 Tablets , Immunity Booster+ – 30 Tablets , Probiotic+ Prebiotic Gummies – 30 Gummies , Plant Protein – 500G , Ultra Omega-3 (Epa 525Mg & Dha 400Mg) – 30 Tablets , Ultra Omega-3 (Epa 525Mg & Dha 400Mg) – 90 Tablets , Advanced Multivitamin For Sports, Unflavoured – 30 Tablets , Advanced Multivitamin For Sports, Unflavoured – 90 Tablets , Shilajit With 80+ Trace Minerals – 10G , Shilajit With 80+ Trace Minerals – 20G , T Boost, Unflavoured – 60 Tablets , T Boost, Unflavoured – 120 Tablets , Multivit Men, Unflavoured – 30 Tablets , Multivit Men, Unflavoured – 90 Tablets , Advanced Multivitamin For Women, Unflavoured – 30 Tablets , Advanced Multivitamin For Women, Unflavoured – 90 Tablets , Liver Detox With Silybin Milk Thistle Extract – 75 Tablets , Glutathione + Nutroxsun, Unflavoured – 30 Tablets , Joint Ease With 1500Mg Of Glucosamine & 1200Mg Of Chondroitin – 90 Tablets , Vegan Omega 3 6 9 – 90 Softgels , Advance Calcium Vitamin D3 & K2mk7, Unflavoured – 90 Tablets , Ashwagandha With 600 Mg Of Ksm-66 – 60 Capsule , Aceclofenac (100Mg) + Paracetamol (325Mg) – Strip Of 15 Tablets , Aceclofenac (100Mg) + Paracetamol (325Mg) + Serratiopeptidase (10Mg) – Strip Of 10 Tablets , Amoxycillin – Strip Of 10 Tablets , Azithromycin – Strip Of 5 Tablets , Olopatadine 0.2% – Eye Drop 5Ml , Ivermectin (6Mg) + Albendazole (400Mg) – Strip Of 1 Tablets , Cefexime – Strip Of 10 Tablets , Cetirizine (5Mg) + Paracetamol (325Mg) + Phenylephrine (10Mg) – Strip Of 10 Tablets , Chloramphenicol – Strip Of 10 Capsule , Trypsin Chymotrypsin (100000Au) – Strip Of 20 Tablet , Chlorzoxazone (500Mg) + Diclofenac (50Mg) + Paracetamol (325Mg) – Strip Of 10 Tablet , Cholecalciferol-60000Iu – Strip Of 4 Capsule , Ondansetron (4Mg) – Strip Of 10 Tablet , Elemental Iron (100 Mg) + Folic Acid (1.5 Mg) – Strip Of 10 Tablet , Camphor-25Mg + Chlorothymol-5Mg + Eucalyptol-125Mg + Menthol-55Mg + Terpineol-120Mg – Strip Of 15 Capsule , Levocetirizine (5Mg) + Montelukast (10Mg) – Strip Of 15 Tablets , Levocetirizine (5Mg) – Strip Of 10 Tablet , Levocetirizine (10Mg) – Strip Of 10 Tablet , Ammonium Chloride-138Mg + Diphenhydramine-14.08Mg + Sodium Citrate-57.03Mg – Syrup 100Ml , Alpha Lipoic Acid-100Mg + Folic Acid-1.5Mg + Mecobalamin-1500Mcg + Pyridoxine Hydrochloride-3Mg – Strip Of 10 Capsule , Metronidazole – Strip Of 10 Tablet , Cholecalciferol-1000Iu + Magnesium-250Mg – Strip Of 10 Tablet , Moxifloxacin-0.5%W/V – Eye Drop 5Ml , Loteprednol Etabonate (0.5% W/V) + Moxifloxacin (0.5% W/V) – Eye Drop 5Ml , Calcium Pantothenate (50 Mg) + Cyanocobalamin (15 Mcg) + Nicotinamide (45 Mg) + Riboflavine (10 Mg) + Thiamine Mononitrate (10 Mg) + Vitamin B6 / Pyridoxine (3 Mg) – Strip Of 30 Tablets , Ofloxacin (200Mg) + Ornidazole (500Mg) – Strip Of 10 Tablet , Pantoprazole – Strip Of 15 Tablets , Paracetamol – Strip Of 10 Tablet , Piroxicam (20Mg) – Strip Of 10 Tablet , Carboxymethylcellulose-0.5%W/V – Eye Drop 10Ml , Diclofenac (50Mg) – Strip Of 10 Tablet , Diclofenac (50Mg) + Paracetamol (325Mg) – Strip Of 10 Tablet , Dicyclomine (20Mg) + Paracetamol (325Mg) – Strip Of 10 Tablet , Vitamin D3 / Cholecalciferol(60000.0 Iu) – Strip Of 12 Capsule Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
24.
Power #10666568 Price Bid
Supply Of 63Kva Silent Diesel Generator Set Supply Of 63 Kva Silent Diesel Generator Set , Supply Of 62 . 5/63 Kva Generator Set , Supply , Installation , Earthing , Cable Laying , Termination , Testing And Commissioning Of Jakson/ Cummins / Koel ( Green ) / Eicher / Mahindra / Crompton Greeves / Ashok Leyland/ Volvo Make ( Those Makes Among The Above List Who Meets Specification Herein ) 415V , 50 Hz 3 Phase , 4 Wire , 1500 Rpm , 0 . 8 Pf . , Outdoor Type 62 . 5/63 Kva Silent Dg Set , Conforming To Latest Revision Of Bs 5514 For Engines And Bs 5000 For Alternator Complete With All Accessories Like :A . Fuel Tank . B . Battery With Leads . C . Standard Control Panel Control Panel Including Power Board . D . Residential Silencer . E . First Fill Of Lube Oil . F . Anti Vibration Mountings And Avm Pads . G . Acoustic Enclosure ( Designed To Meet Stringent Latest Moef/ . Cpcb-Ii Norms ) . H . Side Canopy . I . Interconnecting Cables . J . Fuel/Coolant/Exhaust Pipes . K . Cc Foundation As Per Requirement . L Piping And Pumping Installation Required For Fuel System . Including All Accessorie . . S .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
25.
Banking and Finance #10607564 Price Bid
E-Tender For Procurement Of Equipments For Siep -1 Pre- Vocational Unit 2 Children Wall Bar -n(•tThe Size should be : 85*52*168cmn•tMust be Use full for children to do standing and sitting training with the help of wall bars and muscle strength training as well as trunks traction and extension training.) 3 Children PT Stool(adjustable) -n(•tMust be use full for Used for children PT training.n•tIt must have Wheelsn•tIt should have Blue Leather Sitting) 4 Finger Correcting Board -n(•tUsed to correct fingers flection contracture and adduction malformation.n•tIt should have 4 holes) 5 Finger Correcting Board(with universal wheel) -n(•tUsed to correct fingers flection contracture and adduction malformation.n•tIt should have 3 holesn•tIt Should have 3 or 4 Wheels) 6 Hydraulic children step trainer -n(•tSize Must be: 70*56*97cmn•tWeight not more than: 29kgn•tUse full for lower limbs range of motion and muscle power training.) 7 Training Quoit -n(•tIt must be Use full for hand-eye coordination and perceptionn•tIt must be Use full Cognition training.) 8 Word cognitive puzzle –n(•tWeight not more than : 3.3Kgn•tMaterial must be: wooden) 9 Cognition Toys – n(•tSize should be: 30*30*30cmn•tWeight not more than: 8.7kgn•tShape must contain following:n-tCube 5pcsn-tCylinder 5pcsn-tTriangular 5pcsn-tCuboid 5pcsn•tIt must be use full for perception function training.) 10 Intelligence develop assembly – n(Size must be: 32.2*28.7*23.5cm) 11 PHYSIO-OCCUPATIONAL THERAPY UNIT 12 Treadmill- 2HP Noiseless AC motor 13 Short wave diathermy- 500W with valve 14 Bolsters of different sizes 15 Puzzle - Body parts with two facial expressions with box, Animal, Birds, fruits, transports, Different shapes 16 Shoulder CPM 17 Lower extremity CPM 18 CP chair 19 Static cycle 20 Bed cycle 21 weighing scale 22 texture fruit tree 23 Ball pool (48X 48) 24 perdue peg board 25 exercise mats - 6X3 26 exercise frame - rope mess, pip ladder and rock climbing board 27 Trampoline (48 Inch) 28 Quadriceps Table with detachable backrest 29 Stethoscope 30 blood pressure appratus 31 Goniometer – 180 & 360 degree 32 Electronic stopwatch 33 Digital weighting machine 34 Treatment trolley 35 Stainless steel stools 36 Tables 37 Chairs 38 Waiting chairs 39 Cupboards 40 Computer 41 Printer & scanner 42 Muscle stimulator Combo- with Current -Galvanic, Interrupted Galvanic, Faradic, Surged Faradic and TENS 43 Micro control 4 channel tens 44 Weight cuff- 1/4 kg, 1/2 Kg, 1 Kg, 1.5 kg -n(•tStrengthens weak muscles through load resisting exercises of both upper and lower limbs. n•tLead shots filled cuff is double sewn and had long wrap around straps to hold weight cuff securely in Place. n•tA full set consists of 4 color coded cuffs i.e. Capacity: 250 gm, 500 gm, 1 kg, 1.50 kg) 45 Thera band- different colors and ranges – n(•tTheraBand Rubber Latex Less Bands should be supplied with 5 feet length, 4-inch width of different colour (Yellow, Red, Green, Blue, Black) - Set of 5n•tIt should be Latex Less, No Scent, No Powdern•tColour-coded Progressive Resistance system should allow users to recognize improvement as it happens – when the patient grows stronger they can move up to the next color, for strength training and physical therapy programs. Colour-coded levels should be increasing in difficulty from Yellow to Black) 46 Thera putty with different colors & ranges – n(The system should have following parameters:n•tColours options : Tan, Yellow, Red, Green, Blue, Greyn•tWeight must be: 100grams eachnHigh Resistance Level)n 47 Portable shoulder exerciser with pronation supination arrangement 48 Grip exerciser 49 Hand Gym Kit Board –n(Laminated exercise boards with storage drawer, have several holes to fix Pegs and springs. The unit permits active flexion and extension exercises of the finger and grip.nSpecification:nHand Gymkit Board consists, One finger Disc, One Roller, Three Spring loaded Knobes, 3 pegs to support finger and 3 Sets of Springs of different tensions) 50 Wrist roll -n(The unit should have following parameters:n•tOne piece SS roll with three different diameters i.e. 30mm, 40mm and 50mm to be fitted on a laminated board n•tBoard size: 25cm x 80cm long with adjustable friction control mechanismn•tControllable from zero to maximum for flexion and extension exercises of wrist and forearm) 51 Rope pulley handle set –n(Shoulder Pulley Unit with rope adjustment system (Wall Mounting)n•tShoulder Pulley unit should provide exercises of the Elbow and shoulder. n•tTubular steel constructed unit should come with Pulleys, Nylon Rope, Handles and Wall fixing frame.n•tPulleys: Two, Nylon pulley n•tHandles: Two, spring steel wire handle with plastic grip.n Rope/Cord: Interwoven Nylon cord of suitable length.) 52 Upper extremity work station -n(should have facility of peg board, pinch tree, pipe assemble unit PVC, 25 holes peg board, multi shape peg board, hand tool test frame, finger dexterity board, door latch board, dressing board set, shoulder deduction ladder, bilateral shoulder ladder, hand exercise board Velcro, hand gym board, trolley with lock) 53 Vestibulator with facility of Platform swing, flexion disc, frog swing, Lycra swing , Bolster swing rectangular 54 Vestibular board - 3.6 X 2.6 X 7 – n(Vestibular Board should be of large size for rocking the body on board stimulates balance control with Vestibular Responses. nThe top should be of thickly upholstered and covered with rexine and washable fabric cover) 55 Scooter board – n(•tBoard with 4 Wheels (90cm Long x 30cm wide): It should help the child to learn body control, shifting weight, changing directions and maintain balance. Wooden Scooter Board with foam padded top should be used in a sitting, kneeling or prone position for developing strength of the upper and lower extremities.n•tIt should have ply-wood base, supported on 25mm x 25mm angular iron frame.n•tIt should have high density Foam padded top is 25mm thick & to be covered with nylon fabric in two Colours.n•tIt should be fitted with (4) four, 50mm dia castors.n•tBoard Size should be: 90cm long x 30cm wide) 56 Wedges of different sizes – n(•tWedges with set of four size: A: 15x60x70cm; B: 20x60x70cm; C: 25x60x70cm; D: 30x60x70cm) 57 Post box with 25 plates -n(•tSorting, Matching & Posting Box unit should measure an individual basic level of function in the area of colour identification and Eye-hand co-ordination.n•tConstruction of the box should be Laminated Wooden with five multicolour plastic plates fixed at the top with five Slots to Post matching colour plates there in.n•tIt should have 25 well-polished plastics plates in 5 different colors to sort, match and post.n•tBox should come with five compartments to be fitted with sliding door to store plates and also works as posting box.n•tIt should be Natural polished finish with laminated tops & door.) 58 Door latch board –n (The frame set provides learning opportunity and progressive development of dexterity. nWith six laminated doors, opening in different directions. nEach door opens into a shelf where a reward or toy can be kept. nCommon hardware of different designs, generally used in the home is used to familiarize Patient. Size of laminated unit is 26x18x5 deep.)nnn 59 Floor seater – n(•tFloor sitter should be useful for the child who cannot sit up on his own, and who needs his shoulders and upper trunk supported.n•tThese Floor Sitters must offer support in seating a child at floor level. This must allow the child to be independent, with hands free for play, while maintaining optimal erect trunk alignment.n•tConstruction: It should have Wooden Corner Seat, with broad base that help to prevent tipping.n•tSeat & Back should have Sitter with foam padded Seat, Sides and Back support.n•tAccessories should include abductor block, hip positioning belt & removable tray should be integral part of the floor sitter.nSeater should be finished in natural wood polish. Seat & Back to be covered with multi-colour Rexene) 60 Stand in table with Standing Metal Frame – n(Basic standing frame, with comfortably supports weight- bearing parts of the body. nIt Helps to prevent atrophy of leg muscles, improves range of motion, helps improve circulation, lessens muscle spasms and contractions n Three straps should be provided for heel, ankle and pelvic support) 61 Tunnel – n(•tCrawling tunnel Non-folding, Aluminum sheet with windows on sides and inner area padded with foam should be suitable hospitals with multiple patients.n•tTunnel Set of three parts with windows on sides are padded with soft Eva foam inside. n•tIt should be made in three parts of 90cm long each, all the three tunnels should be fixed together to make a single tunnel of 2.75 meter length.n•tInside Diameter should be 50cm dia.) 62 Treatment Plinth– 63 Wooden blocks of different heights- set of 6– 64 Peanut ball– n(•tIt can help you achieve muscle and tension release for all parts of the body.n•tPeanut shape design, convenient to use.n•tSuitable for yoga, Pilates, etc., help you has better fitness effect.n•tMade of durable PVC material for long term using.n•tFeatures: Peanut Shape, Inflatable, Explosion-proof, Durable, Fitness Tooln•tSize: 45cm x 95cm/17.72 x 37.40 (Approx.) 65 Staircase– n(•tStep arrangement: FOUR 15cm steps on one side, leading to platform size 75cm x 75cm. First step moves into the second to make it a bus step of 30cm height. 7.5cm steps on the other side. Steps are 75cm wide & 23cm deep (approx.).n•tFitted with 2 sets of handrails at different height to accommodate Adults & children. n•tSteps and Platform are made of commercial board of 12 mm thickness & covered with non-slip matting. n•tSides & Supporting frame of Steps are made of commercial board of 18mm thickness with hardwood reinforcement. n•tHand Rails & supporting bars are made of solid hardwood. Stairs finished natural) 66 Parallel bars with platform-n(•tParallel Bars should have adjustable Height & Width with PVC. n•tOuter uprights of thick steel tubing0 of 50mm dia. with Powder coating finish. n•tPlatform: Tubular steel reinforced platform with incline on both ends & is covered with non-slip matting. n•tLength: about 10feet n•tAdjustments: Should be easily done by means of setting Pins at the required holes & should be stabilized by tightening the screws. n•tFinish: Working Parts are with powder coated / chrome plated finish & wooden parts with Natural polish finish.n•tCovered with non-slip matting.n•tPostural Training Mirror: Mirror should be of size 175cm x 53cm (approx.) and should be protected by hardwood polished frame with back covered by ply board. n•tStand: Mirror should be fitted on tubular stand with powder coated finish) 67 Suspension framenSuspension Frame (with Accessories) without Bedn(•tSuspension Frame set for complete Suspension with Slings & Ropes. n•tTop Mesh should facilitate suspension at any desired point in relation to the patient and as required in each individual case. n•tConstruction: Tubular steel frame with 6mm thick Rod-mesh at Top and on Upper Sides. n•tLegs should be fitted With Rubber/PVC Shoes.n•tSizes: Overall sizes 210cm long x 110cm (approx.) wide at the base, 50cm (approx.) wide at the top & 190cm (approx.) high.) 68 Stability Disc–n(It should have balance Cushion - an Inflatable cushion that must come with 2 different surfaces that introduce an element of stability to a workout, must be ideal for both balance and core training. The balance cushion must allow users to exercise and working to stay balance; with constant micro movements that will strengthen the core muscles and improve postures. It should have the benefits of using Balance Cushion. Strengthen core muscles and improve postures required. Diameter- 33 cm required. Colors required: - Lime Green(Spiky Surface), Blueberry (Smooth Surface)) 69 Vibrator (with 6 attachments) – n(•tThe unit should be able to vibrate against the body and stimulate the nerves for a relaxing feeling.n•tIt should give horizontal circular motion which effectively relieves muscular fatigue and pain.n•tIt should have following two speeds:n•tHigh with rpm 3500n•tLow with rpm 1500n•tIt should have cooling system for continuous use so that massage can be done for long time.n•tIt should have durable body for professional use.n•tIt should be heavy duty and the weight should be above 2.5 kg.nIt should have two handles for applying pressure on the chest/muscle group.) 70 Ramp and curb– n(CURBS AND RAMP (without handrails) Hardwood constructed training set consists of ONE ramp and THREE nested curbs stored below the ramp. The ramp graduates from 20mm to 200mm and is 84 X 44. The curbs are 40x 40x 6, 36x 36x 4 and 32x 32x 2 respectively. Natural wood finish with anti-slip safety mats on ramp and curbs without handrails) 71 Balls for ball pool– n(It should have brightly colored balls encourage movement plus give child visual & tactile feed-back and support. * Size of ball should be of 7cm or 8cm dia with different colors) 72 Ankle exerciser-n(Painted aluminum boot with strap to hold the foot is mounted ona laminated base with Stainless steel sheet bracket having two springs for ankle (Dorsi and Plantar flexion) exercises. nResistance can be increased further by tightening springs nut. nDegree of flexion can be measured and recorded) 73 Walker with 4 castors - non folding-n(Walking Aid Folding & Adjustable HeightnLight weight, painted aluminum tubular construction, folds easily and quickly. Height of frame is adjustable from 75 c.m. to 90 c.m. by slipping locking pins in proper notch. Fitted with soft PVC hand grips and shoes) 74 Circle balance disc-n(•tThe board should have encourages Balance and Neuromuscular Re-education, Rhythm, Coordination and Vestibular responses. Children can use it in kneeling or standing position.n•tTop Diameter should be 51cm round, cushioned top covered with rexine.n•tBase must be fitted with semi-circular base, 60mm height.n Hand-Holds must be of Two, Side holds to be provided for stability) 75 Board for lower extremity - standing exercise 76 Foot placement ladder– n(•tIt should be useful in early walking with balance training. n•tShould be of wooden floor ladder with adjustable dividers, n•tShould offer various walking patterns. n•tSteps should be of equal size and alternately placed for right-left progression.n•tBeams & Dividers should be made of Teak-wood with size 96 long x 27 wide.n•tBeams should be finished in natural wood. n Adjustable 16 Divider bars should be finished in different enamel colours) 77 Graded spring set– n(•tSuspension Springs should be made out of best steel wire, with chrome plated finish; the rope is fitted in the spring to avoid overstretching.n•tTension of the springs must be: A. 5 kg-7kg., B.8kg-10kg., C. 12Kg-15kg. D. 18kg-20kg., E. 22kg-25kg.n•tSet should consist of ONE spring each (A+B+C+D+E) with S hooks.n•tIt should be Suitable for Extension, Flexion and Suspension activities.n It should be Full Set of 5 springs) 78 Long Handle thick grip spoons-n(•tIt should have stainless Steel long handled spoons, with smooth spoon tips.n•tThe spoons must help child/baby to master fine motor skills.n•tThese spoons must be easy to clean and maintain.n It should have set of 05 pieces) 79 Tactile balls for grip-n(•tIt should have Bumpy sensation when these are squeeze by hands. Knobby surfaces and bright colours should promote sensory and tactile exploration and it must help develop fine motor skillsn•tIt should have soft and squeezable material easy for small hands to grab and promote hand-eye coordinationn•tIt should have soft, knobby surface to provide massage stimulation for little ones. n•tIt should be supplied with Set which includes (06) toys in assorted colours and shapes (Round, Square, Cone, Pyramid & Rectangle etc.).n•tIt should be BPA, Latex and Phthalate freen•tIt should be helpful to build and define childs gross motor skillsn It must be Capture childrens interests and Hearts) 80 Lotca battery test-n(•tIt should have the plan to provide the appropriate therapy. n•tThe DLOTCA (Dynamic Lowenstein Occupational Therapy Cognitive Assessment) battery must design to offer this type of critical assessment. n•tThe DLOTCA battery must measure the cognitive abilities of those with neurological impairments or injuries.n•tIt should have a set of minimum 28 sub-tests analyses the cognitive areas pertaining to: Orientation, Awareness, Spatial Perception, Visual Perception, Vasomotor Construction, Praxis and Thinking Operations. n•tThe DLOCTA should be supplied with full kit with the following Components: Instruction manual authored by top leaders in the occupational therapy field Test booklets and score sheets Card and shape sets for various sub-tests.nPegs and peg-boards must have followings…n•tTen 1 x 1 natural wood blocks.n•tFour 1 x 1 blue wood blocks.n•tTwo 1 x 1 orange wood blocks.n•tThree 1 x 1 green wood blocks.n•tOne 1 x 1 yellow wood block.n•tButter-fly puzzle. Photo book.n•tSafety scissors.n•tPencil, paper and envelope.n•tCarrying bag.n•tThe kit is compact for easy transportation weighingn•t8.5 pounds and measuring 4.5 x 10.5 x 16.5 inches.) 81 Minnesota test-n(•tIt should measure manual dexterity of the Arm and Hand for manipulative work, utilizing a broad range of shoulder motion.n•tTest should involve Turning, Placing or moving the discs in a prescribed manner. Requires unilateral & bilateral movements.n•tTests should include 60 two colored plastic cylinders, plastic board, record forms and carrying case) 82 Exercise frame - rope mess, pip ladder and rock climbing board 83 Tilt Table– 84 Wobble Board– n(•tAnti-Slip Wooden Wobble Balance Board for Fitness & Training Rehabilitation Exercisen•tHigh Quality Material And Durable: Consisting of quality wood and tough plastic base, highn•tStrength, enduring for daily training.n•tStrength Stability: The balance board also enhancing the muscle strength of waist and n•tAbdomen, beautifying the hip muscle.n•tRotatable: The can support 360 degree horizontal rotating when placing it on flat ground.n•tKeep Balance: Stimulating posture conditioning, strengthening the stability of the vestibular.n•tOrgans and improving the bodys balance.n•tWidely Usage: The balance board is suitable to be used for hemiplegia stroke and other post-balance rehabilitation training.n•tWarranty not applicable for this product) 85 Cryo Therapy Unit–n(•tTherapeutic device should be capable to produce a real deep thermal shock effect.n•tThe thermal shock is a physiological stress should produce by sudden or rapid temperature variations in the local tissues.n•tThe system should not only allow performing cry therapy or hyperthermia separately but also and above all thermal shock therapy in a dynamic and controlled way.n•tHyperthermia, transdermal cryothermica and thermal shock can be modulated in depth and intensity.n•tShould be equipped with a treatment head based on the technology of Peltier cells capable of generating heat or subtracting heat in a range from +45°C to -18°C.n•tA special sensor should transmit the target temperature and the local body temperature should appears on the LCD screen in real-time to inform the operator how the therapy is acting on the patient.n•tAll the functions should be visualized on a large color LCD in addition to the usual and traditional keys and buttons,n•tShould be possible to adjust every parameter on the touch screen.n•tThe versatile Windows CE operating system should ensure possible upgrading.n•tShould have availability of a wide range of preset protocols with body maps. n•tThe screen should show the body parts to be treated and the unit should suggest the parameter values to set after selection of pathology is chosenn•tShould have free memories for entering customized protocols.n•tTemperature: from +45°C to -18°Cn•tShould have Colour touch screen displayn•tCompact unit with dimensions: 41 x 42 x 18 cm or smallern•tLight Weight: Not more than 9 kgn•tSafety class: class I type B, class IIa) 86 Electrical traction with 3 fold Bed-n(•tThe traction unit should consist of set of mechanisms for relieving pressure on the skeletal system.n•tIt should have a large LCD display panel showing all parameters.n•tIt should have at least 8 different modes (a) Intermittent (b) Static (c) Progressive/ intermittent (d) Progressive/ Static (e) Progressive/ Regressive (f) Cyclic /Intermittent (g) Cyclic / Static (h) Cyclic tn•tIt should consist of automatic calibration of traction force to maintain correct traction force.n•tIt should have high/low force range of 1-90 kg/0-89 kg.n•tIt should be possible to apply cervical as well as lumber traction with the machine.n•tIt should have adjustable hold and rest time range of 0 –99 sec.n•tIt should have selectable ramp steps of 2-8 steps with selectable pause time of 2-20 sec. for each step.n•tIt should have 5 different pulling speeds.n•tIt should have memories storage of at least 30 treatment patterns.n•tIt should have timer of 90 minutes.n•tIt should be supplied with Fixed Height Traction bed (Indigenous).n•tShould be supplied complete with Traction Unit, Cervical Harness ,Pelvic Harness, Spreader Bar, Patient Switch) 87 Treatment couch– n(HIGH-LOW TREATMENT TABLE (Electrical)nElectric, variable height, three section table is suitable for all treatments, including manipulation both ends elevate so that the back or legs can be raised without turning the patient. One ends also lower -20 deg. for some postural drainage & manipulation techniques and more comfortable sitting. The foam padded top is 195 cm long and 70 cm wide. Table height is adjustable from 50 cm to 90 cm. Frame-work in light blue oven baked finished) 88 Pain Relief System -n(•tCombination therapy unit with Heat, magnetic force and micro vibrations.n•tThe system should be modern with touch button operation.n•tThe system should consist of two channel unit with 2 hot packs for simultaneous use.n•tIt should have flexible heating pads emitting dry heat so that it can be used over clothes in normal conditions.n•tThe heating pads should have four steps temperature control from 35º to 60ºC.n•tMaximum temperature should not exceed 65 deg for patient protectionn•tIt should provide vibrations through flexible heating pads which help in the stimulation of blood flow on painful areas.n•tThe system should have three different types of micro vibrations as below :notRipple wave: - 70 vibrations per secondnotRandom wave: - 120 vibrations per secondnotBig wave: - 60 vibrations per secondn•tIt should also provide Magnetic force for improving the blood flow.n•tMicro vibration should be from alternating magnetic fieldn•tIt should have digital timer of 30 minutes duration.n•tIt should be supplied with an imported trolley and should work on 240 V/50 Hz power supply.n•tIt should UL, and ISO 13485 approved for patient safety) 89 Wheel Chair for Children– n(The system should have following parameters:n1.tPediatric Wheelchair, Aluminum Chair frame, fixed armrest, Detachable footrest, Drop-back handle, solid castor, pneumatic rear wheel, Anti-tippers.n2.tLoading weight should be minimum 100 kg) 90 Club foot Passive exerciser & Therapy System – n(•tThe CPM should be for treatment of the idiopathic club foot which should restores or maintains ankle and subtalar mobility in addition to preventing fibrosis and periarticular soft tissue changes.n•tThe CPM should be used in the post-operative phase of treatment.n•tThree dimensional movements should be possible:n•tPlantar flexion to Dorsi-flexionn•tAdduction-Varus to Abduction-Valgusn•tPlantar flexion-Adduction-Varus to Dorsi-flexion-Abduction-Valgusn•tDigital controls should allow easy programming.n•tAt rest or working the machine should maintain a light axial traction which off-loads the pressures which are applied to the ankle mortise to avoid any deformation of the tibio-talar joint line.n•tThe machine should be equipped with a system which reverses the movement when abnormal forces are detected.n•tIt should be European CE approved) 91 Children Medical Cycle-n(•tUpright Ergometer for physical abilities such as workload etc. n•tIt should be able to work continuous work load range from 7-1000 watt.n•tIt should work for minimum five minutes at a peak load of 1000 watt for short period.n•tThe work load should be adjustable @ 1 watt increment.n•tIt should have 7 inch touch screen programmable LCD display to show various parameters such as distance, torque, power, energy and time on its control panel.n•tIt should provide workload in hyperbolic, linear and fixed torque modes.n•tIt must have eddy current electro-magnetic braking system.n•tIt should have USB interface.n•tWorkload accuracy should be = 5%.n•tIt should display distance, torque and time on its control panel.n•tIt should have Rotatable height adjustable handlebar redundant, rotate at 360 degrees for comfortable at every seating height. n•tIts seat should be sleeplessly adjustable.n•tIt should comply with MDD 93/42/EEC, incl. IEC.) 92 Ultrasound- 1 and 3 MHz Frequency – n(Digital Dual Pre Programmable Ultrasound therapy unit with constant digital LCD display adjustable treatment should be supplied having following parameters: n?tNominal Frequency: 1MHz & 3MHzn?tPower Density : 0-3W/cm2 (Approx.)n?tMix Acoustic output: 15W (Approx.)n?tUltrasonic Output : Continuous- 2.5 W/cm, Pulse- 3.5 W/cmn?tPulse Frequency: 8hz, 16hz, 50hz, 10hzn?tPulsed Ratios: 1:1,1:4,1:7,1:10n?tTimer: 0-99 minutesn?tVoltage:220 V,50Hz±10%nAccessories to be supplied:n•t1 pair - Ultrasound Head (1Mhz) & Wiren•t1 pair - Ultrasound Head (3Mhz) & Wire n•t1 pc - Main Cord) 93 Computerized Interactive Dynamometer System:-n(Computerized interactive dynamometer system should have following specifications;n•tThe system should comprise of user-friendly and easy-to-control rehabilitation robot to allow rehabilitation Training with dynamically changing resistance, diagnostics, patient evaluation and interactive games.n•tThe system should be upgradable to make use of reactive electromyography (EMG) for neuro exercise. n•tSingle joints or functional and dynamic joint movement should be trained with isolating extensions. n•tThe robotic system should be suitable to provide Kinesitherapy for orthopedic, neurological and cardiac patients of Adult and Pediatric age groups. n•tShould have dedicated exercise program for patients with severe paresis and muscle atrophy. n•tSystem should offer active exercises on all extension for Patients with innerved muscles but severe atrophy n•tThe device should offer exercises for dexterity training with dynamically changing resistance: concentric with elastic resistance and weight simulation.nn•tShould have inbuilt games and dynamic resistance exercises and to improve movement coordination. n•tShould have the facility to upgrade with games working with reactive electromyography n•tShould have tablet mounted on a retractable arm with height adjustable lifting column and preloaded Software application for quick setup and operationn•tShould be mounted on wheels with brakes for easy transportation and immobilization of the robot n•tEach extension should support a maximal applied weight of at least 30 kg. n•tThe rotation axis height of head should be at least 720-1070 mm and rotation limits should be at least 270 degree clockwise and anticlockwise with accuracy at least ±2 deg and Maximum torque: at least 60 Nm with measurement accuracy at least ±0.2 Nm.n•tShould be supplied with changeable extension parts for training and exercise of different joints including Shoulder, Elbow, Hip, Knee, Functional upper limbn•tShould include following extensions easy to mount in any orientation by plug and rotate method and automatic detection by the software: n•tElbow pronation/supination dynamic extension - n•tSteering wheel dynamic extension - n•tUpper limb universal extensionn•t Lower limb universal extension n•tThe system have facility for bioelectric measurements for diagnostic and reactive electromyography with clip electrode for EMG Measurement n•tSystem should have adjustable Range of motion, rotational torque and speed to suit different patient conditions. n•tThe software should provide summary and detailed extension specific information about all performed exercises after every training. n•tSystem Should allow following exercises and diagnosis :na.tContinuous passive motion nb.tProgressive Continuous Passive Motionnc.tSpring (Elastic) exercises:nd.tIsotonic exercises (weight lifting)ne.tDynamic reversalnf.tPrioperception – Hidden/Visibleng.tReactive electromyography trigger and hold nh.tReactive electromyography trigger and release ni.tEMG Biofeedback nj.tDiagnostic EMG nk.tThe software should have three primary game categoriesni.tOrthopedic – acting like concentric exercisesnii.tReactive EMG – acting like reactive electromyography trigger and holdniii.tIsometric EMG – acting like EMG biofeedbacknl.tAt least two games should be provided: Space shooter and Bubble.ni.tSpace shooter a game where the patients control the movement of a spaceship. nii.tBubble- a logic game where patients control the position of a bubble gun launching different color bubbles to form patterns. nThe system should meet the requirements of ISO60601-1-2 for electromagnetic compatibility, including immunity. Should have Class I protection against electric current, Medical device class: class IIa Applied part types: B, BF. ) 94 Lymphatic drainage system 95 BONE GROWTH STIMULATOR 96 Two Channel Combination Therapy With Dual Frequency Ultrasound-n(The Main unit should have:-n•t2 channels electrotherapy unit with 4 electrodes & 1 channel dual frequency ultrasound (1 or 3MHz).n•tColoured touch-screen large LCD for all parameters setting.n•tSimultaneous monitoring of 2 electrotherapy & one ultrasound channel with independent and combined n•tThe unit should operate on100 - 240 VAC 50 Hz.n•tWeight of equipment should be approximately 3.5 Kg for ease of moving.n•tIt should have body diagram with associated clinical programsn•tIt should also have port for attaching vacuum unit. n•tSafety class according to IEC 60601-1: Class 1, Type BFn•tUnit should be European CE approved.nElectrotherapy specifications:n•tDigital Timer: 1-60 minutesn•tIt should also have provision of I/T curve measurement n•tIt should also have setting range for AQ mode whenever vacuum unit is attached.n•tIt should have approximately 28 preset and 120 free program memories n•tVector Sweep 0°, 15°, 30° or 45°nIt should have following setting range:n-tParameter setting range for 2-Pole Interferential moden•tOutput mode: Constant, Sweepn-tParameter setting range for EMS moden•tOutput mode: Surge Independent, Surge Co-Cont., Surge Alternaten-tParameter setting range for Russian moden•tOutput mode: Surge Independent, Surge Co-Cont., Surge Alternaten•tCarrier frequency: 2.5 kHz n•tDuty: 10 to 100% (10% steps)n-tParameter setting range for Hi-Voltage moden•tOutput mode: Constant, Sweep, Burst, Surge Independent, Surge Co-Cont.,n•tSurge Alternaten•tPolarity: positive, negative, alternaten-tParameter setting range for TENS moden•tOutput mode: Constant, Sweep, Burst, Surge Independent, Surge Co-Cont., Surge Alternaten•tWaveform setting: Symmetrical waveform, asymmetrical waveformn•tPolarity: positive, negative, alternaten-tParameter setting range for Micro current moden•tPolarity: positive, negative, alternaten-tParameter setting range for Galvanic moden•tOutput mode: Continuous, Interruptedn•tPolarity: positive, negativen-tParameter setting range for Faradic moden•tPolarity: Positive, negativen•tFrequency: 20 to 250 Hz (10-Hz steps)n-tParameter setting range for Diadynamic moden•tOutput mode: DF, MF, CP, CP-ISO, LP, RSn•tPolarity: positive, negativen•tFrequency: 50 Hz or 100 HznUltrasound specifications:n•tBeam Non-uniformity Ratio (BNR) which prevents hot spots & tissue damage should be less than 5.0 and must be mentioned on the technical literature.n•tEffective Radiating Area (ERA) for large probe should be max. 5 cm2 & for small probe should be max. 1.0 cm2n•tFrequency: 1 & 3 MHz from same headn•tMode: Continuous & pulsed; duty cycle 5-50%n•tMax. Intensity: 3w/cm2in pulsed mode & 2 w/cm2 in continuous mode.n•tDigital Timer: 1-30 minutesn•tMemory capacity of: 18 preset & 10 free Programsn•tUS Probe should be IPX7 protected.nCombination Therapy:n•tIt should work in combination of Ultra sound and electrotherapy with dedicated single electrode of channel 2 as return electrode for electrotherapy and active as US probe.nIt should be supplied with following accessories:nUltrasound head large and small with probe holder, Electrode Cable – 2 pcs., Rubber Electrode, 60x50mm, 2pcs/pack – 2 Pack , Electrode Sponge A, 80x65mm, 2pcs/pack – 2 Pack, Strap (L), 80x1200mm – 2 pcs., Strap (S), 80x600mm – 2 pcs, Ultrasound gel (250 ml), Power Supply Cord (220-240V, Type F) – 1 pc., MCR (Micro current) Probe (2pcs/set to be used), HV/DC ProbenVacuum Unitn•tVacuum unit for enhancing the operability of electrotherapy units especially in abdominal & back regions. n•tThe unit should consist of 2 channel vacuum system for 4 vacuum electrodes.n•tIt should have blow out vacuum system which eliminates the need of water reservoir & reducing maintenance.n•tThe unit should have 2 vacuum modes: Continuous mode & int ermittent mode for patient comfort & skin massage.n•tThe unit should have vacuum strength up to 100 mm Hgn•tThe unit should operate on 100 - 240 VAC with 50 Hz frequency power supplyn•tMain unit should be supplied with:- 4 rubber electrode, 4 electrode sponge, 2 electrode cable, 4 straps (2 large and 2 small), 4 Vacuum electrode, 4 Electrode sponges for Vacuum electrode, Power supply cord.) 97 AUDIOLOGY & SPEECH THERAPY UNIT 98 Single Portable Unit -Pure tone Audiometer with facilities of free field audiometry & speech audiometry with-nFrequency range for AC- 125Hz to 8000HznFrequency range for BC- 250Hz to 6000HznDynamic range (1000Hz)- -10dB HL to 120 dB HLnShould be European CE/ANSI/ISI approved 99 Non-sedated diagnostic BERA with 2 channel and VEMP, ABR & SSR facilities and computer accessibility through USB portal 100 Video Oto-scope with computer accessibility 101 Acoustic booth 15’x12’x 7’ with inner partition, double door, magnetic seal, silenced ventilation 102 Visi-pitch with all accessories 103 Bio feedback system for stammering therapy with all accessories 104 Speech therapy materials (Local purchase) 105 Mattress 6’ x 6’ 106 Group Hearing aid with loop induction system 107 Mattress 6’ x 6’ 108 PSYCHOLOGY UNIT 109 Binet Kamat Intelligence Test (BKT) 110 Intelligence Scale for Indian Children 111 Bhatia Battery of Performance Intelligence Test 112 Diagnostic Test of Learning Disability (DTLD) 113 Diagnostic Test of Reading Disorder (DTRD) 114 Behavioural Checklist for Screening the Learning Disabled (BCSLD) 115 Swarup-Mehta Test of Thinking Strategies (TTS) 116 Thematic Apperception Test (TAT) 117 Non-Verbal Group Intelligence Test (NVGIT) 118 Rorschach Ink Blot Test 119 (DAP:IQ)Draw-A-person Intellectual Ability Test for Children Adolescents and Adults 120 Conduct Disorder Scale (CDS) 121 Revised Hamilton Rating Scale for Depression (RHRSD) 122 Indian Adaptation of the Multidimensional 123 Aptitude Battery - MAB – II 124 Child Sexual Behaviour Inventory (CSBI) 125 Teachers Job Satisfaction Scale 126 ADHD Symptoms Rating Scale (ADHD-SRS) 127 CHILD & ADOLESCENT SYMPTOM INVENTORY-4R (CASI-4R) 128 Multiscore Depression Inventory for Children (MDI-C) 129 Stop Watch [Timer] Racer Electronics [SWE] 130 Gifted and Talented Evaluation Scales 131 Test of Memory and Learning - Second Ed. (TOMAL-2) 132 Early Childhood Inventory-4 (ECI-4) 133 Slosson Full-Range Intelligence Test (S-FRIT) 134 Bender Visual-Motor Gestalt Test - Second Edition (BGT - II) 135 Stroop Color and Word Test (Children) 136 Personality Inventory For Children 2nd Ed. 137 Seguin Form Board Test with Manual & Answer Sheets. 138 Childhood Autism Rating Scale - Second Edition (CARS 2) 139 Children’s Color Trails Test (CCTT) 140 Intelligence Test for Adult 141 State-Trait Anger Expression Inventory-2™(STAXI-2) 142 Multi-dimensional Anxiety Questionnaire (MAQ) 143 Substance Abuse Subtle Screening Inventory (SASSI-3) 144 Suicidal Ideation Questionnaire (SIQ) 145 Relaxation Chair 146 ISAA & INCLEAN TOOLS for ASD 147 BLOOD DISORDER DISABILITY UNIT 148 Thalassemia Rapid test 149 Blood Gas Analyzer 150 Methylene Blue Chemical – 151 Urine Analyzer– 152 VISUAL UNIT 153 Hand held slit lamp 154 Direct Ophthalmoscope 2.8 v 155 Trial set power cotted/Stereo Acuity Test material 156 Trial frame for both adult and paediatric 157 Distance vision testing drum remote control motorised movement 158 VS-V Universal Vision Screener (for school going children also) 159 Tele Binocular Equipment 160 LED Vision Chart 161 Snellen Chart/Eye Testing Drum 162 Automatic Matrix Auto Refractometer R-20 for eye Examination 163 Near Vision Drum 164 Acuity Digital Vision Tester 165 Keratometer&Keratoscope tools 166 Brallier (Braille Type Writer) 167 Orbit Reader (Braille Embossed Reader) 168 Pen Scanner 169 Magnifiers for low vision (NIEPVD) 170 MAGIC software for low vision 171 Electronic Mobility Cane/White Cane 172 TEACHING LEARNING MATERIAL-n(N.B.-All TLM should be made of Nontoxic, Hygienic material ensuring safety of children. Toys should not have any sharp edges to prevent any possible injury to children.) 173 Rattle toys-(Age Group 0 to 3 Years) 174 Fruit Tray-(Age Group 0 to 3 Years) 175 Parts of body-(Age Group 0 to 3 Years) 176 Building Towers-(Age Group 0 to 3 Years) 177 Different Balls-(Age Group 0 to 3 Years) 178 Zig saw Puzzle-(Age Group 0 to 3 Years) 179 Dolls-(Age Group 0 to 3 Years) 180 Wooden Blocks-(Age Group 0 to 3 Years) 181 Drum-(Age Group 0 to 3 Years) 182 English Alphabets & Numbers- (Age Group 3 To 6 Yrs.) 183 Flash Card of Alphabets & Numbers- (Age Group 3 To 6 Yrs.) 184 Eye hand coordination (Beads)- (Age Group 3 To 6 Yrs.) 185 Abacus– (Age Group 3 To 6 Yrs.) 186 Shape, Size, Colour, Concept &. puzzle box – (Age Group 3 To 6 Yrs.) 187 Zig saw Puzzle– (Age Group 3 To 6 Yrs.) 188 Colour book with crayon holder– (Age Group 3 To 6 Yrs.) 189 Easel and Board– (Age Group 3 To 6 Yrs.) 190 Magic Slate– (Age Group 3 To 6 Yrs.) 191 Blowing toys– (Age Group 3 To 6 Yrs.) 192 Picture and Ward Cards - (Age Group 7 To 11 Yrs.) 193 Assembly Kit- (Age Group 7 To 11 Yrs.) 194 Number Cards- (Age Group 7 To 11 Yrs.) 195 Zig Shaw Puzzle - (Age Group 7 To 11 Yrs.) 196 Telling Time Kit - (Age Group 7 To 11 Yrs.) 197 Count and Match - (Age Group 7 To 11 Yrs.) 198 Puzzle body parts - (Age Group 7 To 11 Yrs.) 199 Coloring Books with Crayons– (Age Group 7 To 11 Yrs.) 200 Beads– (Age Group 7 To 11 Yrs.) 201 Magic Slate– (Age Group 7 To 11 Yrs.) 202 Duplicate Currency– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 203 General Knowledge Flash Cards– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 204 Mobile Phone– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 205 Calculator– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 206 Digital Watch– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 207 Number Cubes– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 208 Multiplication Tactile Board– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 209 Worksheet, Pen & Duster, Story Books– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 210 Coloring Books with Crayons– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 211 Kitchen Set– (Age Group 12 To 15 Yrs. & 16 To 18 Yrs.) 212 SPORTS MATERIALS 213 Recreational Gaming Play Station 214 Eye Convalescence System –with Bed 215 EMG Biofeedback With Pelvic Floor Rehabilitation For Urinary Incontinence
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
Odisha View Result →
26.
Petroleum and Natural Gas #10607103 Price Bid
Electrical Equipment Maintenance Contract At Begumpet Afs - 1 2 1 Daily Work Schedule : A Pumps & Motors Leak From Gland / Mechanical Seals Check For Noise, Vibration, And High Temperature Check And Tighten Loose Foundation Bolts. Check Coupling Guards Check Lube Oil Level, Top Up If Reqd. Discharge Pressure. Check & Note Motor Current ( Includiing Submersible Water Pump ) Note Running Hours B D.G Sets Check No Load Operation Of Generator For 10 Mts Check All Meters, Fuses And Indicators. Rectify Faults, If Any. Cooling System, Radiator Water Condition, Leaks, Surface Temperature Check Lube Oil Condition, Leaks. Drain Water / Sediments From Fuel Tank / Filter. Operate Dg Set In Case Of Power Failure. Check For Leaks Of Oil, Diesel & Water C Power Cum Motor Control Centre Monitor Max. Demand, Monitor / Distribute Load So Demand Is Always Restricted Within Contract Demand. Check All Indication Lamps And Meters On Pmcc Panel Check For Any External Damages To Handle Or The Panel D Main Light Distribution Board Check All Indication Lamps And Meters On Pmcc Panel Check For Any External Damages To Handle Or The Panel Check For Any Hot Spots E Compressor Clean Compressor. Check Oil Level In Crank Case. Replenish If Needed. Check Compressor Belt Tension. Drain Water From Air Receiver. F Ups Monitor At Admin & Store Check All Indication Lamps On Ups Unit Is Working. Check For Proper Input & Out Put Of The Ups Unit. Visually Check The Battery Bank For Any Swelling Or Leak. Refuellers Head Lights Side Indicators Parking Lights Tail Lights High Beam-Low Beam ( Dipper ) Funtion Correctly Brake Lights Control Panel Lights Cabin Lights Brake Interlock Lights Anti-Collision Lights Working On Cabin / Tank Top Flasher Working Properly. Flood Lights On Platform Workig ( If Provided ) Reverse Lights & Reverse Alarm System Working Horn Condition Of Junction Boxes Ok Dynamo / Alternator Charging Wipers ( Rainy Season ) 2 Weekly Work Schedule A Batteries At Ups & Dg Set B Fire Alarm System C Continuity Checks For Refueled D Emergency Shut Off Switch 3 Monthly Work Schedule Pumps & Motors B D.G Sets Check On Load Operation. Bearing Condition ( Lubrication, Noise, Temp ) Condition Of Cable Sealing And Terminal Box Check For External Damages, Foundation Pad, Mounting Bolts & Tighten If Necessary Check All Meters, And Safety Trips. Condition Of Guards On Moving Parts. C Power Cum Motor Control Centre / Admin Building Power Panel D Main Light Distribution Board E Compressor F Emergency Shut Off Switch G Street Lights, Hoarding Lights & Veteran Points, All Building Lights H All Ceiling, Wall Mount, Exhaust & Pedestal Fans Check For Proper Mounting Of Fan Check For Satisfactory Operation Of Fans I.E., Flow Of Air Check For Abnormal Noise Or Vibration. Check For Switches And Cable Connection. I Flp Fittings And Junction Boxes At All Sheds And Pump Check All Cover Bolts Are Properly Tightened Check Condition Of The Cable Gland And Seal At Entrance Check For Corrosion Effects On Wire Gauge Around Flp Lamps Check For Cleanliness & Dryness Of Flp Lamp Glass Cover. Check Lamp Brightness / Blackening. Check For External Damages, Overheating, Sparking And Circuiting. Check Operation Of Switches, Circuits, Lamp Fixture Supports. Continuity Checks For Bonding Connection At Tank Form Earth Pits Maintenance , Refuellers Cables Insulation Test D.G Sets
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Telangana View Result →
27.
Defence #10603100 Price Bid
Operation & Comprehensive Annual Maintenance Contract Of External / Internal Electrification, Elevator & Misc Equipments At Drdo Complex, Development Enclave, Delhi Cantt -No. 1 Modular Type Switches / Sockets / Fan Regulators / Telephone / Lan / Tv Front Plates And Anodised Gi Boxes / Buzer 2 Frls Insulated Copper Conductor Wires 3 Frls Conduits ( Pvc / Ms ) & Accessories 4 Metal Clad Sockets 5 Mcbs 6 Cb Distribution Boards 7 Light Fixtures 8 Exhaust Fans 9 Ceiling Fans 10 Buzzers 11 Telephone Cables 12 Mv Switchgear 13 Measuring Instruments 14 Mv Panels 15 Ht Cables 16 Mv & Control Cables 17 Cable Glands 18 Cable Lugs 19 Gi Pipe 20 Maintenance Free Earth Station 21 Tvss 22 Vacuum Circuit Breakers & Sfu 23 Capacitors 24 Lt Cts / Pts 25 Electronic Meters 26 Power Factor Control Relay 27 Heat Shrinkable Jointing Kits 28 Battery / Battery Charger 29 Capacitor Switching Conductors 30 Power System Relays 31 Twisted Pair / Control Cables 32 Street Light Fixtures 33 Telephone Sockets 34 Pvc Conduits & Accessories 35 Acbs / Mcbs / Tpn Sfus 36 Underground Cables 37 Fire Extinguishers 38 Horizontal Centrifugal Fire Water Pumps 39 Raw Water / Treated Water / Soft Water Pumps 40 Motors 41 Pressure Switch 42 D.I. Pipes 43 Mechanical Joint Fittings 44 Underground Pipe Protection 45 Ci Slim Seal Butterfly Valves 46 Electrically Operated Butterfly Valves 47 Dual Plate Check Valves ( Nonreturn ) 48 Gun Metal Gate Valves 49 Earth Station 50 Sluice Valves 51 Air Valves 52 Valves 53 Ms Pipe 54 Led Indications 55 Relays 56 Anti-Vibration Pads 57 Pressure Gauges 58 Digital Flow Meter 59 Mccb 60 Geysers 61 Frls Copper Conductor Wires 62 Multi Detectors 63 Control / Monitor Modules 64 Manual Call Points & Loop Sounders 65 Faultlsolators 66 Siren 67 M C P 68 Control Panel - Fas 69 Repeater Panel 70 Battery ( Sealed Maintenance Free ) 71 Ups 72 Sensor Fire Alarm And Detection System Addressable, Digitally, Conventional 73 Fire Alarm Control / Repeater Panel 74 Detector & Devices ( Hooter, Mcp, Control / Relay / Monitor Module, Fault Isolators Etc. ) 75 Response Indicator 76 Pa System 77 Talk Back System Audio Video System For Auditorium 78 Acoustic Ceiling 79 Acoustic Wall Panelling 80 Sound Reducing Door 81 General Lighting 82 Video Door Phone System 83 Telephone Equipment 84 Epabx 85 Krone Boxes It -Networking 86 Lan / Cat-6 Cable, Patch Cord, Patch Panel, Fiber Cable, Liu, Pigtails Etc. 87 Network Switches 88 Racks
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Delhi View Result →
28.
Housing Urban and Rular Development #10598804 Price Bid
Upgradation Of Existing Fire Fighting Down Comer System And supply installation testing and commissioning Of Manual Operated Fire Alarm System At In Licensing Unit Building At Police Station Defence Colony , New Delhi , Sub Head-I- Upgradation Of Downcomer SystemSupplying , Installation , Testing And Commissioning Of Electric Driven Terrace Pump Suitable For Automatic Operation And Consisting Of Following , Complete In All Respects , As Required: ( Terrace Pump ) ( A ) Horizontal Type , Multistage , Centrifugal , Split Casing Pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft , Mechanical Confirming To Is : 1520 . ( B ) Suitable Hp Squirrel Cage Induction Motor Tefc Type Suitable For Operation On 415 Volts , 3 Phase , 50 Hz , Ac Supply With Ip55 Class Of Protection For Enclosure , Horizontal Foot Mounted Type With Class-F Insulation , Conforming To Is-325 . ( C ) M . S . Fabricated Common Base Plate , Coupling , Coupling Guard , Foundation Bolts Etc . As Required . ( D ) Suitable Cement Concrete Foundation Duly Plastered And With Anti Vibration Pads . ( E ) 450 Lpm At 35 M Head . , Providing & Fixing Of Pressure Switch In M . S . Pipe Line Including Connection Etc . As Required . , Providing Laying , Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 1239/3589 I/C Fittings Like Elbows , Tees , Flanges , Tapers , Nuts Bolts , Gaskets Etc . In Ground Including Welding , Excavation & Providing Cement Concrete Blocks As Supports , Anticorrosive Treatment With Coaltar/Asphalt Tape As Per Is 10221 , Refilling The Trench Etc . Of Following Sizes Complete As Required . , 100 Mm Dia . , Providing , Laying , Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 3589/Is 1239 Including Welding , Fittings Like Elbows , Tees , Flanges , Tapers , Nuts Bolts , Gaskets Etc . And Fixing The Pipe On The Wall/Ceiling With Suitable Clamp/Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : , 100 Mm Dia , 25 Mm Dia , Supplying , Fixing , Testing And Commissioning Of Butterfly Valve Of Pn 1 . 6 Rating With Bronze/Gunmetal Seat Duly Isi Marked Complete With Nuts , Bolts , Washers , Gaskets Conforming To Is 13095 Of Following Sizes As Required : , 100 Mm Dia , Providing , Installation , Testing And Commissioning Of Non-Return Valve Of Following Sizes Confirming To Is: 5312 Complete With Rubber Gasket , Gi Bolts , Nuts , Washers Etc . As Required : , 100 Mm Dia , Supplying , Fixing , Testing & Commissioning Of Double Flanged Sluice Valve Of Rating Pn 1 . 6 With Non Rising Spindle , Bronze/Gun Metal Seat , Isi Marked Complete With Nuts , Bolts , Washers , Gaskets And Conforming To Is 780 Of Following Sizes As Required . , 100 Mm Dia , Providing & Fixing Of Pressure Switch In M . S . Pipe Line Including Connection Etc . As Required , Supplying And Fixing First-Aid Hose Reel With Ms Construction Spray Painted In Post Office Red , Conforming To Is 884 Complete With The Following As Required . 20 Mm Nominal Internal Dia Water Hose Thermoplastic ( Textile Reinforced ) Type -2 As Per Is: 12585 20 Mm Nominal Internal Dia Gun Metal Globe Valve & Nozzle . Drum And Brackets For Fixing The Equipmets On Wall . Connections From Riser With 25 Mm Dia Stop Gun Metal Valve & M . S . Pipe And Socket . , 30 Mtr . , Supplying And Fixing Of Fire Brigade Connection Of Cast Iron Body With Gun Metal Male Instantaneous Inlet Couplings Complete With Cap And Chain As Reqd . For Suitable Dia Ms Pipe Connection Conforming To Is 904 As Required : , 2 Way-100 Mm Dia M . S . Pipe , Supplying And Fixing 63 Mm Dia , 15 M Long Rrl Hose Pipe With 63 Mm Dia Male And Female Couplings Duly Bound With Gi Wire , Rivets Etc . Conforming To Is 636 ( Type-A ) As Required : , Stainless Steel ( Grade 304 ) , Supplying And Fixing Single Headed Internal Hydrant Valve With Instantaneous Stainless Steel Coupling Of 63 Mm Dia With Cast Iron Wheel Isi Marked Conforming To Is 5290 ( Type -A ) With Blankgunmetal/Stainless Steel Cap And Chain As Required : , Single Headed Stainless Steel , Fabrication Supply Installation Testing And Commissioning Of Hose Cabinet Of Size 750 Mmx600mmx250mm Made Of 1 . 6Mm Thick ( Double Door ) Ms Sheet With 6 Mm Thick Glass Doors Including Necessary Locking Arrangements ( 30 X 24 X 10 ) Suitable For 2 Nos . 15 Mtr . Hose And 1 No . Short Branch Pipe . Complete Etc . As Required . , Supplying & Fixing 63 Mm Dia Short Branch Pipe With 20 Mm Nominal Internal Diameter Size Nozzle Conforming To Is 903 Suitable For Instantaneous Connection To Interconnect Hose Pipe Coupling As Required : , Stainless Steel ( Grade 304 ) , Supplying And Fixing Air Vessel Made Of 250 Mm Dia , 8 Mm Thick Ms Sheet , 1200 Mm In Height With Air Release Valve On Top And Flanged Connection To Riser , Drain Arrangement With 25 Mm Dia Gun Metal Wheel Valve With Required Accessories , Pressure Gauge And Painting With Synthetic Enamel Paint Of Approved Shade As Required . , Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank , Is : 12701 Marked , With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet , Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank . , Circular Tank , Painting ( One Or More Coats ) On Rain Water , Soil , Waste And Vent Pipes And Fittings With Synthetic Enamel Paint Of Approved Brand And Manufacture And Required Colour On Old Work . , One Or More Coats On Old Work , Credit For Following Dismantle Items . , 100Mm Butterfly Valves , Hose Reel Drum , 2 Way Fire Brigade Connection , Double Door Hose Cabinet , Terrace Pump , Scrap Polyethylene 2000 Ltrs . Circular Water Tank . , Sub Head-Ii- Sitc Of Manual Fire Alarm SystemSupplying , Installation , Testing & Commissioning Of Main Control And Indicating Panel Made Out Of 16 Swg Ms Sheet To Accommodate The Following Items Duly Powder Coated In Approved Colour With Louvers For Ventilation , Locking Arrangement , Audio And Visual Indication For Fire Alarm And Public Address System , Monitoring System Including Connections , Interconnections Etc Complete As Required . 10 Zone Panel For Fire Alarm System 250 Watt Amplifier Racks Suitable For Operation On 230V Ac/24V Dc Supply Conforming To Iec-268-3 Complete With All Accessories As Required - 2 Nos . ( One To Act As Standby ) Talk Back Master Station With Led Ptt ( Press To Talk ) Push Button For Operation On 230V Ac/24 V Dc Supply Conforming To Iec-268 For Simplex Mode Of Operation/Communication Suitable For 20 Nos . Talk Back Unit -1 Set . Announcement Control Desk Suitable For Selection Of Different Zones Selectively And On All Call Switch With Visual Indication Etc . Complete As Required -1 Set . Amplifier Change Over Switch For Inter Changing Amplifier -1 No . Monitor Panel For Loudspeaker Complete With Output Selector , , On/Off Switch , Fuse , Visual Indications Etc . Complete As Required- 1 No . Gooseneck Microphone With Stand And On/Off Switch- 1 No . Main On/Off Switch , Fuse Indication Lamps , Dc And Ac Voltmeters & Ammeters , Terminal Blocks Etc . Complete As Required -1 Set . Battery Charger Trickle Cum Boost To Take Complete Load Of Fire Alarm & Pa System Complete With All Accessories Including Providing & Fixing Of 2 Nos . 12 Volt , 60 Ah Each Sealed Maintenance Free Batteries -1 Set . , Supplying , Installation , Testing & Commissioning Sector Panel Suitable For Following Zones , Complete With Visual Indications For Short Circuit Fault , Open Circuit Fault , Fire Condition And All Other Standard Facilities As Per Is:2189 With Mimic Diagram For All Area/Zone Covered , Complete With All Connections , Interconnections As Required . , 4 Zone , Supplying , Installation , Testing & Commissioning Of Smoke Detector With Built In Led And Mounting Base Complete With All Connect
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Delhi View Result →
29.
Water Resources and Irrigation #10558790 Price Bid
Supplying, Installation, Testing & Commissioning of Mix-flow type Electric Pump Sets & equipments with all accessories etc. including development of Substation for New Pump House at Jahangirpuri drain near Gopalpur Regulator RD-1135m.- 1 Supplying, installation, testing and commissioning of totally enclosed fan cooled squirrel cage 3-Phase induction motor confirming to protection IP 55 Horizontal foot mounted suitable for open duct on 415+/- 10%, 3-Phase 50HZ +/- 5% AC supply with Ambient 50°C class F insulation 55 KW/75 HP , 6 Pole , 980 RPM with performance standard confirming to IS 12615 coupled with suitable size standard Coupling to MF 35x35 Size Pump set having 1400 m3/hr discharge at 10 mtr head and CI casing, SS Impeller, SS shaft, SS shaft sleeve with Gland packed shaft sealing complete with all standard accessories mounted on frame of suitable size with complete grouting or mounted on suitable cushyfoot vibration mounting pad completed etc. as required at site(Motor Make:- Kirloskar/Crompton/ A.B.B./ Siemens) (Pump Make:- Kirloskar/ Wilo/ Flowmore/KSB) 2 Supplying, installation, testing and commissioning of totally enclosed fan cooled squirrel cage 3-Phase induction motor confirming to protection IP 55 Horizontal foot mounted suitable for open duct on 415+/- 10%, 3-Phase 50HZ +/- 5% AC supply with Ambient 50°C class F insulation 75 KW/100 HP , 8 Pole , 740 RPM with performance standard confirming to IS 12615 coupled with suitable size standard Coupling to MF 40x45 Size Pump set having 2000 m3/hr discharge at 10 mtr head and CI casing, SS Impeller, SS shaft, SS shaft sleeve with Gland packed shaft sealing complete with all standard accessories mounted on frame of suitable size with complete grouting or mounted on suitable cushyfoot vibration mounting pad completed etc. as required at site(Motor Make:- Kirloskar/Crompton/ A.B.B./ Siemens) (Pump Make:- Kirloskar/ Wilo/ Flowmore/KSB) 3 Supplying , installation, testing and commissioning of Sound Proof Steel enclosure Water Cooled Engine coupled with Alternator 320KVA/256 KW silent DG Generator set including Base frame, Radiator/Heat Exchanger/Fuel Tank/ Control Panel /AMF panel, fuel piping foundation, all interconnections, loop Earthing, Silencer completed all as per CPWD/CPCB norms with standard accessories etc. as required.(Make:- Crompton Greaves/ Kirloskar/ Cummins or as approved by Engineer-in-charge) 4 M.S. Pipes:-Manufacturing , Supplying, erection & commissioning of Mild Steel ERW, (Electric Resistance welded) Pipe fabricated/manufactured out of Fe410 Mild Steel Grade 330 as per IS: 3589 of reputed & approved make , including painting with epoxy paint inside and outside surface with two coats of anticorrosive paint of approved brand and manufacture : all conforming to relevant IS codes: complete in all respect and with upto date amendments in relevant IS codes:(Pipe make:- Jindal/ Surya/ Tata or as approved by Engineer-in-charge)1200mm nominal dia pipes of 12mm thick complete as required at site. 5 350mm nominal dia pipes of 8mm thick complete as required at site. 6 400mm nominal dia pipes of 8mm thick complete as required at site. 7 450mm nominal dia pipes of 8mm thick complete as required at site. 8 MS Flanges:- Manufacturing, Supplying, fixing & welding of following sizes M.S. Flanges etc complete. as requiredat site. 1200mm dia. & 25mm thickness. 9 350mm dia. & 20mm thickness. 10 400mm dia. & 20mm thickness. 11 450mm dia. & 20mm thickness. 12 MS Bends:-Manufacturing, Supplying, fixing & welding of following sizes M.S. Bends etc. complete. as requiredat site. 1200mm dia. 13 350mm dia. 14 400mm dia. 15 450mm dia. 16 MS Dummy Flanges:-Manufacturing, Supplying & fixing of M.S. Dummy Flanges etc. of following sizes complete as required at site. 1200mm dia. & 25mm thickness. 17 350mm dia. & 16mm thickness. 18 400mm dia. & 25mm thickness. 19 C.I. Sluice Valves:-Providing & Fixing of following sizes Cast Iron Sluice gate Valve suitable for Pressure 1.0 PN complete in all respects as required at site. (Make: - Kirloskar/Kartar/Sant or as approved by Engineer-in-charge)350 mm nominal dia. 20 450 mm nominal dia. 21 C.I. Non Return Valves :-Providing & Fixing of following sizes Cast Iron Non Return Valve suitable for Pressure 1.0 PN complete in all respects as required at site. (Make: - Kirloskar/Kartar/Sant or as approved by Engineer-in-charge)350 mm nominal dia. 22 400 mm nominal dia. 23 Nut/Bolts/Washers:-Manufacturing & Supplying of Nuts,Bolts & Washers etc. of size 7/8 x 6 as required at site. 24 Rubber Gaskets:-Manufacturing, Supplying & Fixingof Rubber Gaskets of thickness 6mm or more for following sizes M.S. Pipelines Flanges as required at site.1200mm nominal dia. 25 350mm nominal dia. 26 400mm nominal dia. 27 450mm nominal dia. 28 Vaccum Pump:-Supplying, Installation, Testing and Commissioning of DV-50 Vaccum Pump sets having C.I. casing and C-40 shaft with 10 H.P. energy efficiency LV motor, 3 phase, 415volt 50hz, 1500RPM +/- 5%, TEFC induction motor mounted on suitable size M.S.base frame coupled on existing foundation withall accessories like ML 1.5 starter, anti vibration mounting pad, coupling, nut-bolts & packing etc. complete in all respect i/c providing, fitting & testing ofheavy class M.S. pipe of 50mm dia.of requiredlength with necessary Gate valve and mountings etc.for chargingof pump sets. ( Pump:- Kirloskar make or as approved by Engineer-in-charge) (Motor:- Kirloskar/Crompton /ABB or as approved by Engineer-in-charge) (Pipe make:- Jindal/ Surya/ Tata or as approved by Engineer-in-charge) 29 Supplying, installation, testing & commissioning of Energy efficient 630 KVA, 11/0.433 KV, 3 phase, 50Hz, Dyn11, outdoor ONAN type, copper wound Transformer with off load tap changing arrangement on HV side , Tapping range +5% to -10% in steps of 2.5%having Cable boxes on HV/LV side suitable for 3 x 240 Sq.mm. XLPE Cable of 11 KV grade with accessories, buckholz relay i/c first filling of filtered dehydrated oil and confirming to IS 335& Transformer losses as per IS 1180 level-2 & as per specification attached complete in all respects as required at site. • Max Continuous Rating = 630 KVA • Voltage Ratio = 11/0.433 KV• Tapping (Range/ Step) off Circuit Tap Changer = +5% to -10% in step of 2.5% off load • Insulation Class = A Class • Application of the Transformer = Distribution• Vector Group = Dyn 11• Temperature Rise at Rated Load over Ambient of 40°/50° C• Cooling = ONAN(Make:- Kirloskar/Schenider/ABB or as approved by Engineer-in-charge) 30 Supplying, Installation, Testing and Commissioning of Indoor Type Floor Mounted metal clad, 11KV VCB Panel with 1 No. VCB for ICOG System (Incoming-Outgoing System), Totally Enclosed. Horizontal drawout, Horizontal/Vertical Isolation type Breaker as per IS 13118 & as ammended upto date and additional specifications as mentioned below, manually charged and motorized /manually closing breaker suitable for use on 11 KV, 3 Phase, 50 Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated Aluminium Bus Bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4NC and equipped with following switchgears and accessories i/c connections suitable for 3 x 95 sqmm XLPE 11 KV cable (cable entry frombottom/top/side) (MAKE:- Kirloskar/ L&T/ Crompton/Schenider)1. All CTs and PTs shall be cast resin type.2. 2. All PTs should be Fixed type.Detailed Specifications:-1 Nos. 800A TP Electrically drawout type Vacuum Circuit Breaker, 11KV, 20KA/3 seconds suitable for 630A TP, EDO, 18.4KA/1 second with following accessories:a)Spring Charge Motor, 240V A.C, Closing Coil 24V DC, Shunt Trip Coil 24V DC, Operation Counter with Mechanical ON/OFF Push Buttonb)Mechanical Indicator ON/OFF, Aux. Contacts 4NO + 4NC, Spring Charge/Discharge,Mechanical Spring Charging Device.c)Mechanical Emeregency Push Button2. 1 No. 11 KV / 110V PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-15 kV), digital type, selector switch for voltmeter and protection fuses / MCB for HT metering up to 12 KV on incomer.3. 1 No. Microprocessor based numerical relay with O/L,E/F and S/C protection.4. 1 sets of 3 nos dual core dual ratio CTs 50/50/5/5A of 15 VA burden and accuracy class - 0.5 for metering and class 5P 10 for protection.5. Flush mounted Type High Speed Tripping Relay,6. Flush mounted Type DC Operated Auxiliary relay for Transformer Faults with Three Pair of Relay Element7. 1 Nos. Anti Pumping relay8. Annunciator Set 8 Window Type with Hooter for Fault Indication9. Supplying, Installation, Testing and Commissioning of Power pack with 220 volt AC input & 24 volt DC continuous output suitable for closing / tripping / indication of 1 No. HT Panel Boards with 2 Nos. 12 volts each maintenance free batteries of 100 AH each, charging unit, capacitor bank for emergency delivering for Trip system complete with suitable capacity of Ammeter & voltmeter i/c connections with 2.5 sqmm FRLS insulated copper conductor cable etc. as required. 31 Fabrication Supply Installation Testing and Commissioning of Main L.T Panel suitable for 415 Volt, 3 Phase 4 Wire System, 50Hz AC Supply. Panel Shall be fabricated out of 1.6MM thick CRCA Sheet for load bearing and non load bearing members, Gland Plate shall be fabricated out of 2MM thick CRCA Sheet. Panel shall be Powder coated with RAL 7032 Shade for Doors and Body and have suitable solid links for Incoming ond Outgoing of the ACB with Electrical Grade Aluminium of 1000 Ampere Capacity supported on DMC/SMC Bus Bar Supports. Earthing shall be done with 25 X 5MM G.I Strip running acroos the Panel Length. The Control Wiring for Metering and Display Instruments shall be done with PVC Insulated 1.1KV Grade multi stranded copper wire of 2.5 Sqmm. Proper Ventilation system for heat disipation shall be provided with Panel including ventialtion fan and louvers. The Panel Shall not be less than 1875 X 2000 X 750 m.m or Cm³(H,L&D) The Panel shall be fitted with the following switchgear & instruments as mentioned below:-Incoming:-a)1000A TP ACB, Manually Type with following protection features such as Overload and Shor Circuit protectionb)Digital Type Multifuntion Meter, bearing Cl 1 Accuracy without RS485 Portc)Phase Indication Lamps for R-Phase, Y-Phase and B-Phase, 240V A.Cd)ACB ON and OFF Indication Lampse)6A SP MCB, 10KA Breaking Capacity for Protection and Control Circuitf)1 Set of 1000/5 CT, CL-1.0, 15VA Burden Tape WoundOutgoing:-a)55KW Star Delta Starter with ML4 contractors and 200A TP MCCB 36KA Breaking Capacity with suitable Handle and Spreaders: 4 Nosb)30KW Star Delta Starter with ML3 contractors and 200A TP MCCB 36KA Breaking Capacity with suitable Handle and Spreaders: 4 Nosc)400A TP MCCB, 36KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 4 Nosd)200A TP MCCB, 25KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 1 Nos.e)125A TP MCCB, 25KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 1 Nos.f) 100A TP MCCB, 25KA Breaking Capacity having Thermal Magnetic Release with O/L and S/C Protection : 4 Nos. 32 Supplying, installation, testing & commissioning of Cubical Type Phase sequence corrector suitable for 415 Volt, 3 Phase 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 2mm thick CRCA sheet of size for frame work and covers, having Gland plate less than 3mm including cleaning and finishing complete with powder coating in approved shade, having links not less 600A capacity. the Bus Bar support (wherever required) with short curcuit withstand capacity of 31 MVA for 1 sec.Entire panel shall have a common Earth Bus of suitable size at the Rear with 2 Nos. Earth stud, solid connections from main Bus Bar to switch Gears with requires size of Aluminium Bus Bar (wherever required) and control wiring shall be done with 2.5 sq.mm PVC insulated copper conductor single core cables. Including providing and fixing the following switch Gear.A) Materiala) 580A Three Pole Power Contactors, AC3 Duty, Coil voltage 220 V A.C: 2 Nos. (Make:- ABB/L&T/C&S)b) LED type indication Lamps RYB (3 set) Aux. Supply: 220V A.Cc) Control Miniture Circuit Breaker (3 Nos.) SP, 10KA : 6Ad) Single Phase Digital Type Ampere Metre, 3 Phase 4 wire system, Flush type 96 Sq.mm. (1 Nos.) Class-1 accuracy, CT-Input-5A, Aux. Volt-220V,ACe) Ampere Selector Switch (1No.) Rating : 6Af) Single Phase Digital Type Volt Metre, 3 Phase 4 wire system, Flush type 96 Sq.mm. (1 Nos.) Class-1 Accuracy, Range:- 0-500 V, Aux. Volt:220V, A.Cg) Voltage Selector Switch (1No.) Rating : 6Ah) Current transformer 600/5A, Single Ratio, Single Core, 1Ø (3 Nos.) , Tape wound, CL-1.0 & 15VAi) LED type Indication LampsON/OFF (2 set) Aux. Supply: 220V A.Cj) Auto/ Manual selector switch (2 Nos.), Rating : 6Ak) Phase Sequence correction relay (1 Nos.) Aux Volt :220V, A.Cl) Audio Indication for Phase sequence Reversal(1 Nos.) Hooter : 220V A.C.m) On Delay Timer (1 Nos.) Aux Volt :220V, A.C 33 SITC of 200KVAR APFC Panel made out of 1.6mm Thick CRCA Sheet duly powder coated complete with suitable size of Al. Bus Bars & internal wiring with suitable size of Copper wire including Providing and Fixing following Switchgear and Metering instruments complete as required. Panel size shall not be less than 1575m.m or Cm³*1900*350.. the Capacitors Shall be Divided as per the mentioned Pattern for 200KVAR SystemA) MaterialMain Incomer:-a) 400A TP MCCB, Thermal based Release with O/L & S/C Protection: 1 Nos.b) Rotary Operating Mechanism: 1 Nos.c) Phase Spreaders: 1 Setd) 12 Stage APFC Relay, Microprocessor Based, with Different Display Parameters.e) Phase Indication Lamps, 220V-240V AC : 3 Nos.2) Outgoing:-a) 63A TP MCCB, Thermal Magnetic Release with O/L & S/C Protection, with ROH and Spreaders: 6 Nosb) 40A TP MCCB, Thermal Magnetic Release with O/L & S/C Protection, with ROH and Spreaders: 2 Nos.c) 25A TP MCCB, Thermal Magnetic Release with O/L & S/C Protection, with ROH and Spreaders: 2 Nos.3) 200 KVAR Capacitor, MPP and Cylindrical Type:-a) 25KVAR Capacitor Bank: 6 Nos.b) 15KVAR Capacitor Bank: 2 Nos.c) 10KVAR Capacitor Bank: 2 Nos.4) Capacitor Duty Contactors of Various Ratings for Capacitor Switching:-a) Capacitor Duty Contactors for 25KVAR Cap. Bank , MOC 25 or Equivalent : 6 Nosb) Capacitor Duty Contactors for 25KVAR Cap. Bank , MOC 15 or Equivalent : 2 Nosc) Capacitor Duty Contactors for 25KVAR Cap. Bank , MOC 10 or Equivalent : 2 Nosd) Side Mounting Block : 10 Nose) Push Button with Element Set for Manual Start & Stop of Capacitor Bank : 10 Setsf) Indication Lights for Capacitor ON Indication : 20 Nos.g) 4 Ventilation Fans with Louvers for Cross Air Ventilation : 1 Nosh) Auto/Manual Selector Switch for Auto/Manual mode of Operation : 1 Nos. 34 Copper Conductor LT Cables:-Supplying, Laying and fixing of following sizes P.V.C. insulated and P.V.C. sheathed/ XLPE CopperConductorarmoured Cable of 1.1 KV grade as per IS:1554 or amendment up-to-date on surface including connection making, taping etc. complete as required. (Make:- National/Grandlay/ Glouster/ Poly-Cab/ Havells/ Phinolex or as approved by the Engineer-in-charge)4C x 10 sqmm. 35 4C x 120 sqmm 36 4C x 150 sqmm 37 Aluminium Conductor LT Cables:-Supplying, Laying and fixing of following size P.V.C. insulated and P.V.C. sheathed/ XLPE AluminiumConductorarmoured Cable of 1.1 KV grade as per IS:7098 or amendment up-to-date on surface including connection making, taping etc. complete as required. (Make:- National/Grandlay/ Glouster/ Poly-Cab/ Havells/ Phinolex or as approved by the Engineer-in-charge)3.5C x 300 sqmm 38 3.5C x 150 sqmm 39 Aluminium Conductor HT Cables:-Supplying, Laying and fixing of following size P.V.C. insulated and P.V.C. sheathed/ XLPE AluminiumConductorarmoured Cable of 11 KV(E) grade as per IS:7098 or amendment up-to-date on surface including connection making, taping etc. complete as required. 3.5C x 300 sqmm(Make:- National/Grandlay/ Glouster/ Poly-Cab/ Havells/ Phinolex or as approved by the Engineer-in-charge) 40 Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 x 16 sq. mm 41 4 x 35 sq. mm 42 4 x 10 sq. mm 43 Supply and making outdoor end jointing with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 11 KV grade as required.3C x 300 sq. mm 44 Supplying & fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth busbar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 6 way, Double door 45 8way, Double door 46 Supplying and fixing metal box of 100mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 47 Supplying, installation, testing & commissioning of energy efficient LED Flood light luminaries of system wattage 72 watt complete with mounting brackets & accessories i/c connections complete as required.(Make:- Bajaj/Philips/Crompton/Halonix) 48 Supplying and fixing followingpiano type switch/socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch 49 15/16 amp switch 50 3 pin 5/6 amp socket outlet 51 6 pin15/16 amp socket outlet 52 Supplying and fixing (two module) stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required. 53 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, , miniature circuit breaker suitable for inductive load of folloeing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole 54 Single pole and neutral 55 Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVS insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular plate, sitable GI Box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Group C) 56 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.2x2.5 sq.m + 1x2.5 sq.m earth wire 57 2 x 4 sq. mm +1 x 4 sq.mmearth wire 58 Supplying, installation, testing and commissioning ofHeavyduty following sizes exhaust fan 900 RPM totally enclosed heavy duty motor with die castaluminium rotor suitable for operation on 240 volts 50 Hz AC single phase Supply including installation of exhaust fan in the existing opening, making good the damages as required. .(Bajaj, Usha, Khaitan, Havells, Orient ) or as approved by Engineer-in-charge.450 mm Sweep 59 Supplying, installation, testing and commissioning of 1200 mm sweep AC electric ceiling fan capacitortype with double ball bearing complete with down rod, canopies, shackles, blades but without regulator suitable for operation on 230/240 volts, 50 Hz single phase AC supply including wiring the down rod of standard lenth up to 1 mtr with 2x1.5 sq. mm PVC insulated copper conductor with fan sheet etc. as required.(Make:- Bajaj/ Usha/ Khaitan/ Havells/ orientor as approved by Engineer-in-charge) 60 Supplying, installation, testing & commissioning of prewired Indoor decorative 18/20 watt LEDbatten extruded aluminum housing& opal diffuser. IP20 complete with all accessories including connection making etc. as required. (Make:- Bajaj/ Halonix/ Havell’s/ Crompton/ Phillipsor as approved by Engineer-in-charge) 61 Supplying and fixing of following size P.V.C. insulated sheathed /XLPE Aluminum conductor cable of 1.1 KV Grade armoured as per IS:7098 on surface as required. (National,Grandlay, Glouster, Poly-Cab, Phinolex or as approved by Engineer-in-charge). 2 x 10 sq.mm 62 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. 63 Providing and fixing 25 x 5 mm G.I.strip on surface or in recess including connection etc. as required. 64 Providing and laying 6 SWG G.I wire on surface or in recess for loop earthing along with existing surface/recessed/conduit/submain wiring/cable etc. as required. 65 Supplying, Installation, Testing and commissioning of 7.5 Tonne capacity Single Girder E.O.T. Crane comprising of Main Girder, End carriages -02 nos with long travel motors – 02 Nos, 01 Nos 5 Tonne capacity Wire Rope Electric Hoist, pendant controlled along with brakes, limit switches and electric panel. All motors i.e. Hoisting/ Lowering, cross travel and long travel shall be compatible with VVVF drive and the speeds can be adjusted from zero to maximum speed. The complete system includes erection of columns, LT Girders, LT rail/ Sq Bar, 01 no DSL system (Shrouded type)(MAKE: - GLOBE/ WH BRADY/ GARLIC) 66 Supplying, Installation, Testing and commissioning ofNew Generation Energy Saving & Environment friendly long versatile pressure die cast aluminium IP 66 roadway luminaire with high power 150 Watt LED street lights complete with all accessories etc. as required.(Make:- Phillips/Bajaj/Crompton/Halonix/ Havells or as approved by Engineer-in-charge) 67 Supplying, Installation, Testing and commissioning ofNew Generation Energy Saving & Environment friendly long versatile pressure die cast aluminium IP 66 roadway luminaire with high power 100 Watt LED Flood lights complete with all accessories etc. as required.(Make:- Phillips/Bajaj/Crompton/Halonix/ Havells or as approved by Engineer-in-charge). 68 Fabrication & installation of S.S. Bar Screen/ Jaal inside Suction side of Pump Sump in slightly inclined position of required height with M.S. Platform etc. for ease of removal of foreign materials, hyacinth, jute, bags etc. from the suction side completed etc. as required at site.Construction, maintenance and subsequent removal of earthen bundies including cost of excavation earth filling of E.C. bags with earth, stitching and placing in position for care and diversion of all kinds of water entering or flowing in the drain and pumping out surface as well as under groung seepage water to keep the construction area completely dry for execution of entire work including its execution of work in or under water and or liquid mud wherever required with round the clock watch & ward/maintenance of earthen bundies to keep the working area/site dry complete as per specification & direction of Engineer-in-charge. 69 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500 D or more. 70 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 71 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cementconcrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverableseparately). All works upto plinth level. 72 Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 73 Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as Nuts, Bolts,fasteners etc.).
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Delhi View Result →
30.
New and Renewable Energy #10553288 Price Bid
Rate Contract For Spares For Epiroc Make U/G Equipment , Rate Contract For Spares For Epirocmake U/G Equipment , Cable, 1-Core Part No.-0017206030 , Cable, 1-Core Part No.-0017206040 , Cable, 1-Core Part No.-0017206050 , Cable, 1-Core Part No.-0017206070 , Cable, 1-Core Part No.-0017207120 , Cable, 1-Core Part No.-0017210030 , Cable, 4-Core Part No.-0017230722 , Kabel, 4-Ledare Part No.-0019840529 , Prot Hose Part No.-0070402406 , Slang Part No.-0070402410 , Protection Hose Part No.-0070402412 , Protection Hose Part No.-0070402413 , Plastic Tube Part No.-0070600204 , Plastic Tube Part No.-0070600209 , Water Hose Part No.-0075400568 , Water Hose Part No.-0075400569 , Hydraulic Ho Part No.-0075500556 , Hydraulic Ho Part No.-0075500557 , Protection H Part No.-0075500563 , Warning Label Part No.-0088000775 , Mounting Rail Part No.-0090140002 , Rubbermoulding Part No.-0090700501 , Pin Part No.-0101136200 , Pin Part No.-0101136400 , Pin Part No.-0101146000 , Pin Part No.-0101195128 , Cylindric Pi Part No.-0101195163 , Parallell Pi Part No.-0101195170 , Pin Part No.-0101231600 , Pin Part No.-0101268000 , Pin Part No.-0101829100 , Pin Part No.-0102022200 , Pin Part No.-0102040500 , Pin Part No.-0102041000 , Cyl.Pin Part No.-0102041500 , Pin Part No.-0102045800 , Pin Part No.-0102046000 , Pin Part No.-0102046900 , Pin Part No.-0102047300 , Pin Part No.-0102047600 , Parallel Pin Part No.-0102048200 , Parallel Pin Part No.-0102062600 , Pin Part No.-0102095151 , Pin, Grooved Part No.-0106621700 , Spring Pin Part No.-0108110310 , Spring Pin Part No.-0108119300 , Spring Pin Part No.-0108119800 , Spring Pin Part No.-0108120000 , Spring Pin Part No.-0108124000 , Spring Pin Part No.-0108132200 , Spring Pin Part No.-0108133200 , Spring Pin Part No.-0108135300 , Spring Pin Part No.-0108136100 , Spring Pin Part No.-0108136200 , Spring Pin Part No.-0108136300 , Spring Pin Part No.-0108136600 , Spring Pin Part No.-0108137000 , Spring Pin Part No.-0108139000 , Spring Pin Part No.-0108139400 , Spring Pin Part No.-0108139500 , Spring Pin Part No.-0108139600 , Spring Pin Part No.-0108139700 , Spring Pin Part No.-0108139900 , Spring Pin Part No.-0108140000 , Spring Pin Part No.-0108140100 , Spring Pin Part No.-0108140200 , Spring Pin Part No.-0108141500 , Spring Pin Part No.-0108142300 , Spring Pin Part No.-0108142700 , Spring Pin Part No.-0108149400 , Spring Pin Part No.-0108152100 , Spring Pin Part No.-0108152400 , Spring Pin Part No.-0108169039 , Spring Pin Part No.-0108169064 , Spring Pin Part No.-0108169077 , Spring Pin Part No.-0108332200 , Spring Pin Part No.-0108333200 , Spring Pin Part No.-0108335300 , Spring Pin Part No.-0108335900 , Spring Pin Part No.-0108339200 , Spring Pin Part No.-0108340000 , Spring Pin Part No.-0108342300 , Saxpinne Part No.-0111122900 , Saxpinne Part No.-0111125300 , Split Pin Part No.-0111128100 , Split Pin Part No.-0111130700 , Split Pin Part No.-0111137700 , Split Pin Part No.-0111145300 , Locking Clip Part No.-0111168605 , Lassprint Part No.-0111168608 , Ring Pin Part No.-0111168611 , Ring Pin Part No.-0111168613 , Ring Pin Part No.-0111168614 , Pin Part No.-0111168615 , Bolt Part No.-0113223100 , Bolt Part No.-0113241300 , Pin Part No.-0113241500 , Blind Rivet Part No.-0129310300 , Blindnit Part No.-0129310400 , Blind Rivet Part No.-0129310800 , Blind Rivet Part No.-0129312500 , Blind Rivet Part No.-0129320700 , Blind Rivet Part No.-0129327044 , Screw, Hex Head Part No.-0144320303 , Screw, Hex Head Part No.-0144320503 , Hexagon Screw Part No.-0144320603 , Screw, Hex Head Part No.-0144320703 , Hex. Head Screw Part No.-0144320803 , Screw, Hex Head Part No.-0144320903 , Hexagon Screw Part No.-0144321103 , Screw, Hex Head Part No.-0144321203 , Screw, Hex Head Part No.-0144324116 , Screw, Hex Head Part No.-0144324118 , Screw, Hex Head Part No.-0144324290 , Screw, Hex Head Part No.-0144324294 , Hexagon Screw Part No.-0144324303 , Hexagon Screw Part No.-0144324305 , Screw, Hex Head Part No.-0144324503 , Screw, Hex Head Part No.-0144324603 , Screw, Hex Head Part No.-0144324703 , Screw, Hex Head Part No.-0144324803 , Screw, Hex Head Part No.-0144324903 , Screw, Hex Head Part No.-0144325103 , Hexagon Screw Part No.-0144325303 , Screw, Hex Head Part No.-0144328203 , Screw, Hex Head Part No.-0144328403 , Screw, Hex Head Part No.-0144328503 , Screw, Hex Head Part No.-0144328603 , Screw, Hex Head Part No.-0144328703 , Screw, Hex Head Part No.-0144328803 , Screw, Hex Head Part No.-0144329003 , Screw, Hex Head Part No.-0144329103 , Hexagon Screw Part No.-0144329203 , Screw, Hex Head Part No.-0144329703 , Hexagon Screw Part No.-0144330403 , Screw, Hex Head Part No.-0144332603 , Screw, Hex Head Part No.-0144336003 , Screw, Hex Head Part No.-0144336203 , Screw, Hex Head Part No.-0144336303 , Screw, Hex Head Part No.-0144336503 , Screw, Hex Head Part No.-0144336603 , Screw, Hex Head Part No.-0144336703 , Screw, Hex Head Part No.-0144336803 , Screw, Hex Head Part No.-0144337003 , Hexagon Screw Part No.-0144337203 , Screw, Hex Head Part No.-0144337703 , Capscrew Part No.-0144337903 , Screw, Hex Head Part No.-0144400032 , Capscrew,Hex Part No.-0144400084 , Hexagon Screw Part No.-0144400122 , Screw, Hex Head Part No.-0144400124 , Screw, Hex Head Part No.-0144400126 , Screw, Hex Head Part No.-0144400129 , Hexagon Screw Part No.-0144400135 , Capscrew,Hex Part No.-0144400175 , Hexagon Screw Part No.-0144400195 , Hexagon Screw Part No.-0144400199 , Hexagon Screw Part No.-0144400201 , Hex. Head Screw Part No.-0144400206 , Hex. Head Screw Part No.-0144400214 , Hex. Head Screw Part No.-0144400215 , Screw, Hex Head Part No.-0147120503 , Screw, Hex Head Part No.-0147120703 , Screw, Hex Head Part No.-0147120803 , Screw, Hex Head Part No.-0147121303 , Screw, Hex Head Part No.-0147124203 , Screw, Hex Head Part No.-0147124303 , Screw, Hex Head Part No.-0147124403 , Screw, Hex Head Part No.-0147124603 , Screw, Hex Head Part No.-0147124702 , Screw, Hex Head Part No.-0147124703 , Screw, Hex Head Part No.-0147124803 , Screw, Hex Head Part No.-0147124903 , Screw, Hex Head Part No.-0147125003 , Screw, Hex Head Part No.-0147125103 , Screw, Hex Head Part No.-0147125203 , Screw, Hex Head Part No.-0147125303 , Screw, Hex Head Part No.-0147125403 , Screw, Hex Head Part No.-0147125603 , Screw, Hex Head Part No.-0147125803 , Screw, Hex Head Part No.-0147125903 , Screw, Hex Head Part No.-0147126203 , Screw, Hex Head Part No.-0147131903 , Screw, Hex Head Part No.-0147132003 , Screw, Hex Head Part No.-0147132103 , Screw, Hex Head Part No.-0147132203 , Screw, Hex Head Part No.-0147132303 , Screw, Hex Head Part No.-0147132403 , Screw, Hex Head Part No.-0147132503 , Screw, Hex Head Part No.-0147132603 , Screw, Hex Head Part No.-0147132703 , Screw, Hex Head Part No.-0147132712 , Screw, Hex Head Part No.-0147132803 , Screw, Hex Head Part No.-0147132903 , Screw, Hex Head Part No.-0147133003 , Screw, Hex Head Part No.-0147133103 , Screw, Hex Head Part No.-0147133203 , Screw, Hex Head Part No.-0147133303 , Screw, Hex Head Part No.-0147133403 , Screw, Hex Head Part No.-0147133503 , Screw, Hex Head Part No.-0147133603 , Screw, Hex Head Part No.-0147134303 , Screw, Hex Head Part No.-0147135603 , Screw, Hex Head Part No.-0147135703 , Screw, Hex Head Part No.-0147135803 , Screw, Hex Head Part No.-0147135903 , Screw, Hex Head Part No.-0147136003 , Screw, Hex Head Part No.-0147136103 , Screw, Hex Head Part No.-0147136203 , Screw, Hex Head Part No.-0147136303 , Screw, Hex Head Part No.-0147136403 , Screw, Hex Head Part No.-0147136503 , Screw, Hex Head Part No.-0147136505 , Screw, Hex Head Part No.-0147136603 , Screw, Hex Head Part No.-0147136703 , Hex. Head Screw Part No.-0147136712 , Screw, Hex Head Part No.-0147136803 , Screw, Hex Head Part No.-0147136812 , Screw, Hex Head Part No.-0147136903 , Screw, Hex Head Part No.-0147137003 , Screw, Hex Head Part No.-0147137103 , Screw, Hex Head Part No.-0147137203 , Screw, Hex Head Part No.-0147137303 , Screw, Hex Head Part No.-0147137503 , Screw, Hex Head Part No.-0147137703 , Screw, Hex Head Part No.-0147137903 , Screw, Hex Head Part No.-0147137912 , Screw, Hex Head Part No.-0147138103 , Screw, Hex Head Part No.-0147138203 , Hex Head Cap Part No.-0147139703 , Screw, Hex Head Part No.-0147139803 , Hex Head Cap Part No.-0147139903 , Screw, Hex Head Part No.-0147140003 , Screw, Hex Head Part No.-0147140103 , Screw, Hex Head Part No.-0147140203 , Screw, Hex Head Part No.-0147140303 , Screw, Hex Head Part No.-0147140307 , Screw, Hex Head Part No.-0147140309 , Screw, Hex Head Part No.-0147140403 , Screw, Hex Head Part No.-0147140503 , Screw, Hex Head Part No.-0147140603 , Screw, Hex Head Part No.-0147140703 , Hex Head Cap Part No.-0147140803 , Screw, Hex Head Part No.-0147140903 , Screw, Hex Head Part No.-0147141003 , Screw, Hex Head Part No.-0147141103 , Screw, Hex Head Part No.-0147141112 , Screw, Hex Head Part No.-0147141303 , Screw, Hex Head Part No.-0147141503 , Screw, Hex Head Part No.-0147141512 , Screw, Hex Head Part No.-0147141703 , Skruv, Sexkant Part No.-0147141800 , Screw, Hex Head Part No.-0147141803 , Screw, Hex Head Part No.-0147141903 , Screw, Hex Head Part No.-0147142003 , Screw, Hex Head Part No.-0147143803 , Hex Head Cap Part No.-0147144003 , Screw, Hex Head Part No.-0147144103 , Screw, Hex Head Part No.-0147147303 , Hex Head Cap Part No.-0147147403 , Screw, Hex Head Part No.-0147147603 , Screw, Hex Head Part No.-0147147703 , Screw, Hex Head Part No.-0147147803 , Screw, Hex Head Part No.-0147147903 , Screw, Hex Head Part No.-0147148003 , Screw, Hex Head Part No.-0147148103 , Screw, Hex Head Part No.-0147148203 , Screw, Hex Head Part No.-0147148303 , Screw, Hex Head Part No.-0147148403 , Screw, Hex Head Part No.-0147148503 , Screw, Hex Head Part No.-0147148703 , Hex Head Cap Part No.-0147148803 , Hex Head Cap Part No.-0147148903 , Screw, Hex Head Part No.-0147149103 , Screw, Hex Head Part No.-0147149203 , Screw, Hex Head Part No.-0147149403 , Screw, Hex Head Part No.-0147149503 , Screw, Hex Head Part No.-0147149603 , Screw, Hex Head Part No.-0147149903 , Screw, Hex Head Part No.-0147150003 , Screw, Hex Head Part No.-0147150103 , Screw, Hex Head Part No.-0147154803 , Screw, Hex Head Part No.-0147155003 , Screw, Hex Head Part No.-0147155303 , Screw, Hex Head Part No.-0147155403 , Screw, Hex Head Part No.-0147155503 , Screw, Hex Head Part No.-0147155703 , Screw, Hex Head Part No.-0147155903 , Screw, Hex Head Part No.-0147156403 , Screw, Hex Head Part No.-0147157103 , Screw, Hex Head Part No.-0147157403 , Hex Head Cap Part No.-0147164303 , Screw, Hex Head Part No.-0147195776 , Screw, Hex Head Part No.-0147195796 , Hexagon Screw Part No.-0147195827 , Screw, Hex Head Part No.-0147195865 , Screw, Hex Head Part No.-0147195884 , Screw, Hex Head Part No.-0147195899 , Screw, Hex Head Part No.-0147196026 , Screw, Hex Head Part No.-0147196028 , Screw, Hex Head Part No.-0147196069 , Sexkantsskru Part No.-0147196119 , Screw, Hex Head Part No.-0147196136 , Screw, Hex Head Part No.-0147196180 , Screw, Hex Head Part No.-0147196181 , Screw, Hex Head Part No.-0147196228 , Screw Part No.-0147196264 , Hex Head Cap Part No.-0147196285 , Flange Screw Part No.-0147300017 , Standard Scr Part No.-0147300025 , Flange Screw Part No.-0147300033 , Flange Screw Part No.-0147300034 , Screw Part No.-0160099611 , Screw, Slotted Part No.-0160099613 , Screw, Slotted Part No.-0160124400 , Screw, Slotted Part No.-0160603600 , Screw, Slotted Part No.-0160603900 , Screw, Slotted Part No.-0160604100 , Screw, Slotted Part No.-0160604200 , Screw, Slotted Part No.-0160605900 , Screw, Slotted Part No.-0160606100 , Screw, Slotted Part No.-0160606200 , Screw, Slotted Part No.-0160606300 , Screw, Slotted Part No.-0160608400 , Screw-Slotte Part No.-0162156727 , Screw, Slotted Part No.-0162417400 , Screw, Slotted Part No.-0162420500 , Screw, Slotted Part No.-0162432200 , Screw, Slott Part No.-0162436000 , Set Screw Part No.-0190324101 , Set Screw Part No.-0192117000 , Set Screw Part No.-0192120400 , Set Screw Part No.-0194132000 , Set Screw Part No.-0196120300 , Set Screw Part No.-0196124200 , Set Screw Part No.-0196131800 , Set Screw Part No.-0196155210 , Set Screw Part No.-0196155224 , Hex Sock. Screw Part No.-0211110272 , Hex Sock. Screw Part No.-0211110501 , Screw Part No.-0211110603 , Screw Part No.-0211117003 , Screw Part No.-0211117300 , Screw Part No.-0211117303 , Screw Part No.-0211117403 , Screw Part No.-0211117600 , Screw Part No.-0211117703 , Hex Sock. Screw Part No.-0211117803 , Screw Part No.-0211120303 , Screw Part No.-0211120503 , Screw Part No.-0211120700 , Screw Part No.-0211120703 , Screw Part No.-0211120800 , Screw Part No.-0211120803 , Screw Part No.-0211121103 , Skruv Part No.-0211121200 , Screw Part No.-0211121400 , Screw Part No.-0211121500 , Screw Part No.-0211121503 , Screw Part No.-0211122300 , Skruv Part No.-0211124303 , Screw Part No.-0211124403 , Screw Part No.-0211124603 , Screw Part No.-0211124703 , Screw Part No.-0211124903 , Skruv Part No.-0211125000 , Skruv Part No.-0211125100 , Screw Part No.-0211125103 , Screw Part No.-0211125203 , Screw Part No.-0211125403 , Screw Part No.-0211132003 , Screw Part No.-0211132303 , Screw Part No.-0211132503 , Screw Part No.-0211132603 , Screw Part No.-0211132703 , Screw Part No.-0211136003 , Screw Part No.-0211136203 , Screw Part No.-0211136303 , Screw Part No.-0211136403 , Screw Part No.-0211136503 , Screw Part No.-0211136703 , Screw Part No.-0211136803 , Screw Part No.-0211136903 , Screw Part No.-0211140203 , Screw Part No.-0211140303 , Screw Part No.-0211143800 , Screw Part No.-0211143900 , Screw Part No.-0211144000 , Screw Part No.-0211147703 , Screw Part No.-0211149700 , Hex Sock. Screw Part No.-0211195733 , Screw Part No.-0211196044 , Screw Part No.-0211196078 , Screw Part No.-0211196081 , Screw Part No.-0211196082 , Screw Part No.-0211196083 , Screw Part No.-0211196084 , Screw Part No.-0211196085 , Screw Part No.-0211196086 , Screw Part No.-0211196272 , Screw Part No.-0211196278 , Screw Part No.-0211196280 , Screw Part No.-0211196281 , Screw Part No.-0211196285 , Screw Part No.-0211196288 , Screw Part No.-0211196289 , Screw Part No.-0211196291 , Screw Part No.-0211196292 , Screw Part No.-0211196294 , Screw Part No.-0211196295 , Screw Part No.-0211196298 , Screw Part No.-0211196302 , Screw Part No.-0211196303 , Screw Part No.-0211196305 , Screw Part No.-0211196307 , Screw Part No.-0211196309 , Screw Part No.-0211196314 , Screw Part No.-0211196323 , Screw Part No.-0211196328 , Screw Part No.-0211196329 , Screw Part No.-0211196333 , Screw Part No.-0211196334 , Screw Part No.-0211196336 , Screw Part No.-0211196337 , Screw Part No.-0211196340 , Screw Part No.-0211196341 , Screw Part No.-0211196345 , Screw Part No.-0211196347 , Screw Part No.-0211196348 , Screw Part No.-0211196351 , Screw Part No.-0211196354 , Screw Part No.-0211196383 , Screw Part No.-0211196388 , Screw Part No.-0211196391 , Hex Sock. Screw Part No.-0211196402 , Hex Sock. Screw Part No.-0211196435 , Skruv Part No.-0211196518 , Hex Sock. Screw Part No.-0211196558 , Screw Part No.-0211528800 , Screw Part No.-0211529300 , Screw Part No.-0211532800 , Schrew Part No.-0211533100 , Screw Part No.-0211536300 , Screw Part No.-0211536500 , Hex Sock. Screw Part No.-0211537900 , Hexagon Screw Part No.-0215000380 , Hex Sock. Screw Part No.-0216110008 , Hex Sock. Screw Part No.-0216110011 , Screw Part No.-0216124300 , Screw Part No.-0216124703 , Screw Part No.-0216124900 , Sexkanthalsk Part No.-0216195761 , Wing Screw Part No.-0223132202 , Shoulder Scr Part No.-0223400046 , Shoulder Scr Part No.-0223400051 , Tapping Screw Part No.-0226030600 , Tapping Screw Part No.-0226030700 , Tapping Scre Part No.-0226031000 , Gängande Skruv Part No.-0226032600 , Tapping Screw Part No.-0226035005 , Gängande Skruv Part No.-0226035101 , Gängande Skruv Part No.-0226035107 , Tapping Screw Part No.-0226330023 , Tapping Scre Part No.-0226332005 , Screw Part No.-0226991512 , Sq. Neck Bol Part No.-0226991519 , Welding Bolt Part No.-0228100010 , Screw, Drive Part No.-0244414300 , Screw Part No.-0244416400 , Screw, Drive Part No.-0244416600 , Stud Part No.-0246195490 , Pinnskruv Part No.-0246195648 , Stud Part No.-0246195652 , Stud Part No.-0246288811 , Threaded Rod Part No.-0248997918 , Thread.Rod Part No.-0248997927 , Threaded Rod Part No.-0248997954 , Thread.Rod Part No.-0248997986 , Threaded Rod Part No.-0248998009 , Threaded Rod Part No.-0248998035 , Gangad Stang Part No.-0248998068 , Thread Insert Part No.-0259001100 , Thread Insert Part No.-0259006800 , Thread Insert Part No.-0259008400 , Thread Insert Part No.-0259008600 , Thread Inser Part No.-0259015007 , Thread Insert Part No.-0259015010 , Thread Inser Part No.-0259031006 , Thread Inser Part No.-0259031009 , Thread Insert Part No.-0259031100 , Gänginsats Part No.-0259200900 , Threadinsert Part No.-0259201000 , Threadinsert Part No.-0259201300 , Threadinsert Part No.-0259201400 , Threadinsert Part No.-0259203900 , Threadinsert Part No.-0259204500 , Threadinsert Part No.-0259204600 , Gänginsats Part No.-0259205800 , Thread Insert Part No.-0259206100 , Gänginsats Part No.-0259206200 , Thread Insert Part No.-0259207303 , Threadinsert Part No.-0259208200 , Nut Part No.-0261109011 , Hexagon Nut Part No.-0261109012 , Nut Part No.-0261109028 , Mutter M20x1 Part No.-0261109911 , Nut Part No.-0261211000 , Nut Part No.-0261211100 , Nut Part No.-0261211200 , Nut Part No.-0261211400 , Nut Part No.-0261211600 , Mutter Part No.-0266111504 , Mutter Part No.-0266210700 , Nut Part No.-0266210800 , Mutter Part No.-0266211000 , Mutter Part No.-0266211100 , Nut Part No.-0266211200 , Mutter Part No.-0266211400 , Nut Part No.-0266211600 , Hexagon Nut Part No.-0268413805 , Cap Nut Part No.-0277112814 , Cap Nut Part No.-0277113004 , Cap Nut Part No.-0277131000 , Slotted Nut Part No.-0281136600 , Lock Nut Part No.-0291111000 , Lock Nut Part No.-0291111200 , Lock Nut Part No.-0291111400 , Lock Nut Part No.-0291112804 , Lock Nut Part No.-0291112807 , Lock Nut Part No.-0291112812 , Lock Nut Part No.-0291112813 , Låsmutter Part No.-0291112814 , Låsmutter Part No.-0291112815 , Lock Nut Part No.-0291112816 , Låsmutter Part No.-0291112818 , Lock Nut Part No.-0291112819 , Lock Nut Part No.-0291112820 , Lock Nut Part No.-0291112821 , Låsmutter Part No.-0291112822 , Låsmutter Part No.-0291112825 , Låsmutter Part No.-0291112826 , Lock Nut Part No.-0291112828 , Låsmutter Part No.-0291112830 , Lock Nut Part No.-0291112842 , Lock Nut Part No.-0291112843 , Lock Nut Part No.-0291112844 , Locknut Part No.-0291112845 , Lock Nut Part No.-0291112866 , Lock Nut Part No.-0291118001 , Lock Nut Part No.-0291118002 , Lock Nut Part No.-0291118549 , Låsmutter Part No.-0295310500 , Lock Nut Part No.-0295310600 , Lock Nut Part No.-0295311300 , Vingmutter Part No.-0296111000 , Wing Nut Part No.-0296111100 , Bl.Rivet Nut Part No.-0298100019 , Wheel Nut Part No.-0299100005 , Hjulmutter Part No.-0299100006 , Hjulmutter Part No.-0299100008 , Wheel Nut Part No.-0299100009 , Wheel Nut Part No.-0299100010 , Plain Washer Part No.-0300027406 , Plain Washer Part No.-0300027413 , Plain Washer Part No.-0300027416 , Plain Washer Part No.-0300027417 , Plain Washer Part No.-0300027434 , Plain Washer Part No.-0300027449 , Plain Washer Part No.-0300027464 , Bricka Part No.-0300027474 , Plain Washer Part No.-0300027483 , Plain Washer Part No.-0300027491 , Plain Washer Part No.-0300027493 , Plain Washer Part No.-0300027502 , Plain Washer Part No.-0300027507 , Plain Washer Part No.-0300027528 , Plain Washer Part No.-0300027605 , Plain Washer Part No.-0300027609 , Plain Washer Part No.-0300027626 , Rundbricka Part No.-0300027632 , Plain Washer Part No.-0300027678 , Plain Washer Part No.-0300800500 , Plain Washer Part No.-0300800600 , Plain Washer Part No.-0300801000 , Plain Washer Part No.-0300801100 , Plain Washer Part No.-0300801900 , Plain Washer Part No.-0300802200 , Plain Washer Part No.-0301212101 , Plain Washer Part No.-0301230900 , Plain Washer Part No.-0301231500 , Plain Washer Part No.-0301231800 , Plain Washer Part No.-0301232100 , Plain Washer Part No.-0301233500 , Plain Washer Part No.-0301234300 , Plain Washer Part No.-0301234400 , Washer Part No.-0301235800 , Plain Washer Part No.-0301236400 , Plain Washer Part No.-0301237100 , Plain Washer Part No.-0301237800 , Plain Washer Part No.-0301238600 , Plain Washer Part No.-0301239400 , Plain Washer Part No.-0301240500 , Plain Washer Part No.-0301240504 , Plain Washer Part No.-0303115900 , Plain Washer Part No.-0303127401 , Plain Washer Part No.-0303127404 , Sfärisk Bricka Part No.-0304101200 , Sfärisk Bricka Part No.-0304106200 , Square Washe Part No.-0306200009 , Spacer Sleeve Part No.-0324100030 , Spacer Sleeve Part No.-0324113000 , Spacer Sleeve Part No.-0324120102 , Sleeve Part No.-0324125300 , Spacer Sleeve Part No.-0324127300 , Spacer Sleeve Part No.-0324146300 , Adjust. Washer Part No.-0324155016 , Adjust. Wash Part No.-0324155040 , Adjust. Washer Part No.-0324155147 , Adjust. Washer Part No.-0324155148 , Spacer Ring Part No.-0324155156 , Support Ring Part No.-0324155161 , Backup Ring Part No.-0324155185 , Back- Up Rin Part No.-0324155187 , Back-Up Ring Part No.-0324155189 , Back-Up Ring Part No.-0324155190 , Spacing Scre Part No.-0324180012 , Spacing Nut Part No.-0324180044 , Spacing Screw Part No.-0324180047 , Speric Washer Part No.-0333050002 , Con.Washer Part No.-0333050003 , Conical Wash Part No.-0333050008 , Speric Washer Part No.-0333050024 , Spring Washer Part No.-0333213000 , Spring Washer Part No.-0333213600 , Spring Washer Part No.-0333217421 , Spring Washe Part No.-0333217429 , Spring Washer Part No.-0333217434 , Spring Washe Part No.-0333217457 , Spring Washer Part No.-0333223000 , Lock Washer Part No.-0333311401 , Låsbricka Part No.-0333312000 , Låsbricka Part No.-0333312700 , Låsbricka Part No.-0333313200 , Lock Washer Part No.-0333317415 , Lock Washer Part No.-0333520008 , Lock Washer Part No.-0333520009 , Lock Washer Part No.-0333520010 , Lock Washer Part No.-0333520013 , Lock Washer Part No.-0333520016 , Lock Washer Part No.-0333520017 , Låsbricka Part No.-0333610500 , Lock Washer Part No.-0333610600 , Lock Washer Part No.-0333610700 , Lock Washer Part No.-0333611300 , Lock Washer Part No.-0333612300 , Circlip Part No.-0335110425 , Circlip Part No.-0335110430 , Circlip Part No.-0335111800 , Circlip Part No.-0335111900 , Circlip Part No.-0335112700 , Circlip Part No.-0335113200 , Circlip Part No.-0335113300 , Circlip Part No.-0335114100 , Circlip Part No.-0335114300 , Circlip Part No.-0335114500 , Circlip Part No.-0335114600 , Circlip Part No.-0335114700 , Circlip Part No.-0335115100 , Circlip Part No.-0335115200 , Circlip Part No.-0335115600 , Circlip Part No.-0335115800 , Circlip Part No.-0335116000 , Circlip Part No.-0335116100 , Circlip Part No.-0335116200 , Circlip Part No.-0335116900 , Circlip Part No.-0335117800 , Circlip Part No.-0335118200 , Circlip Part No.-0335118400 , Circlip For Part No.-0335210502 , Circlip Part No.-0335212402 , Circlip Part No.-0335212700 , Circlip Part No.-0335213000 , Circlip Part No.-0335213200 , Circlip Part No.-0335213202 , Circlip Part No.-0335213600 , Circlip Part No.-0335213700 , Circlip Part No.-0335214000 , Circlip Part No.-0335214100 , Circlip Part No.-0335214200 , Circlip Part No.-0335214300 , Circlip Part No.-0335214600 , Circlip Part No.-0335214700 , Circlip Part No.-0335215100 , Circlip Part No.-0335215200 , Circlip Part No.-0335215400 , Circlip Part No.-0335215500 , Circlip Part No.-0335215800 , Circlip Part No.-0335216200 , Circlip Part No.-0335216500 , Circlip Part No.-0335216600 , Circlip Part No.-0335216900 , Circlip Part No.-0335217100 , Circlip Part No.-0335217300 , Circlip Part No.-0335217600 , Circlip Part No.-0335217800 , Circlip Part No.-0335218000 , Circlip Part No.-0335218200 , Circlip Part No.-0335218400 , Circlip Part No.-0335220400 , Circlip Part No.-0335221700 , Retaining Ring Part No.-0335310800 , Retaining Ri Part No.-0335311000 , Retaining Ri Part No.-0335311300 , Lock Ring Part No.-0335350010 , Lock Ring Part No.-0335350026 , Lock Ring Part No.-0335350132 , Circlip Part No.-0335357600 , Flat Key Part No.-0337000943 , Key Part No.-0337208300 , Key Part No.-0337530500 , Key Part No.-0337723700 , Key Part No.-0337752300 , Flat Key Part No.-0337810700 , Key Part No.-0337820600 , Key Part No.-0337826600 , Flat Key Part No.-0337829500 , Spring Part No.-0339100007 , Ring Spring Part No.-0339100008 , Ring Spring Part No.-0339100010 , Clamping Uni Part No.-0339100021 , Pipe Clamp Part No.-0346022100 , Clamp Part No.-0346100002 , Clamp Part No.-0346100003 , Pipe Clamp Part No.-0346100006 , Clamp Part No.-0346100007 , Pipe Clamp Part No.-0346100017 , Pipe Clamp Part No.-0346100019 , Pipe Clamb Part No.-0346100024 , Pipe Clamp Part No.-0346100029 , Pipe Clamp Part No.-0346100041 , Clamp Part No.-0346100201 , Pipe Clamp Part No.-0346100202 , Clamp Part No.-0346100203 , Clamp Part No.-0346100204 , Clamp Part No.-0346100205 , Pipe Clamp Part No.-0346100209 , Clamp Part No.-0346100241 , Clamp Part No.-0346100242 , Clamp Part No.-0346100243 , Pipe Clamp Part No.-0346100314 , Pipe Clamp Part No.-0346100519 , Pipe Clamp Part No.-0346210500 , Clamp Part No.-0346257100 , Pipe Clamp Part No.-0346290012 , Pipe Clamp Part No.-0346290013 , Pipe Clamp Part No.-0346300010 , Clamp Part No.-0346300055 , Pipe Clamp Part No.-0346300057 , Clamp Halves Part No.-0346300097 , Cover Plate Part No.-0346300217 , Cover Plate Part No.-0346300225 , Clamp Halves Part No.-0346300238 , Clamp Halves Part No.-0346300241 , Clamp Halves Part No.-0346300247 , Cover Plate Part No.-0346300248 , Slangklämma Part No.-0347405217 , Hose Clip Part No.-0347610020 , Hose Clip Part No.-0347610042 , Hose Clip Part No.-0347610052 , Hose Clip Part No.-0347610300 , Hose Clip Part No.-0347610500 , Hose Clip Part No.-0347610600 , Slangklämma Part No.-0347610900 , Slangklämma Part No.-0347611300 , Slangklämma Part No.-0347611400 , Slangklämma Part No.-0347612000 , Ball Joint Part No.-0357100001 , Ball Knob Part No.-0362110900 , Narrow V-Bel Part No.-0367010032 , Narrow V-Bel Part No.-0367010062 , Chain Part No.-0369100009 , Lifting Eye Part No.-0371110002 , Lifting Eye Part No.-0371110003 , Lifting Eye Part No.-0371110006 , Shackle Part No.-0372410010 , Cup Spring Part No.-0384300016 , Cup Spring Part No.-0384300019 , Spring Part No.-0384331200 , Spring Part No.-0384343300 , Disc Spring Part No.-0384350800 , Disk Spring Part No.-0384354600 , Compress.Spr Part No.-0384500027 , Tryckfjader Part No.-0384500029 , Compress.Spr Part No.-0384500045 , Vibr. Damper Part No.-0392110002 , Vibr. Damper Part No.-0392110004 , Vibr.Damper Part No.-0392110010 , Vibr.Damper Part No.-0392110034 , Vibration Da Part No.-0392110043 , Vibr. Damper Part No.-0392110045 , Dämpare Part No.-0392111002 , Vibr. Damper Part No.-0399999905 , Damper Part No.-0399999907 , Damper Part No.-0399999908 , Damper Part No.-0399999909 , Insert Tool Part No.-0462701034 , Flanged Bear Part No.-0500000009 , Glidlager Part No.-0500032400 , Glidlager Part No.-0500129600 , Plain Bearing Part No.-0500420400 , Flange Bearing Part No.-0500450003 , Flange Bearing Part No.-0500450007 , Bushing Part No.-0500450011 , Flange Bearing Part No.-0500450012 , Flange Bearing Part No.-0500450023 , Flange Beari Part No.-0500450033 , Flange Bushi Part No.-0500450060 , Plain Bearing Part No.-0500450082 , Plain Bearing Part No.-0500450091 , Flange Beari Part No.-0500450094 , Flanged Bear Part No.-0500450119 , Bearing Part No.-0500450122 , Flanged Bear Part No.-0500450130 , Flanged Bear Part No.-0500450131 , Bushing Part No.-0500452003 , Bushing Part No.-0500452006 , Bushing Part No.-0500452007 , Bushing Part No.-0500453620 , Bearing,Sp.P Part No.-0501000008 , Ledlager Part No.-0501000009 , Bearing,Sp.Pl. Part No.-0501000016 , Bearing,Sp.Pl. Part No.-0501000017 , Bearing Part No.-0501000028 , Bearing Sp.L Part No.-0501000039 , Bearing Part No.-0501000051 , Bearing Part No.-0501000055 , Bearing Part No.-0501000069 , Bearing,Sp.P Part No.-0501000072 , Bearing Part No.-0501000900 , Bearing Part No.-0501001200 , Bearing Part No.-0501001300 , Bearing,Sp.Pl. Part No.-0501001400 , Bearing Part No.-0501001500 , Bearing,Sp.Pl. Part No.-0501001600 , Bearing Part No.-0501001900 , Bearing Part No.-0501001901 , Bearing Part No.-0501002000 , Bearing Part No.-0501002100 , Bearing,Sp.P Part No.-0501002302 , Bearing Part No.-0501100009 , Rod End Part No.-0501100505 , Rod End Part No.-0501100509 , Ball Bearing Part No.-0502109060 , Ball Bearing Part No.-0502109070 , Ball Bearing Part No.-0502109088 , Ball Bearing Part No.-0502109194 , Ball Bearing Part No.-0502110900 , Ball Bearing Part No.-0502111000 , Kullager Part No.-0502111500 , Kullager Part No.-0502111700 , Ball Bearing Part No.-0502122600 , Ball Bearing Part No.-0502122601 , Ball Bearing Part No.-0502123600 , Ball Bearing Part No.-0502155003 , Ball Bearing Part No.-0502210500 , Roll.Bearing Part No.-0502310500 , Ball Bearing Part No.-0502310700 , Bearing Unit Part No.-0502801016 , Bearing Unit Part No.-0502801017 , Bearing Housing Part No.-0502801021 , Ball Bearing Part No.-0503210900 , Ball Bearing Part No.-0504020015 , Ball Bearing Part No.-0504060001 , Kullager Part No.-0504210400 , Ball Bearing Part No.-0504020013 , Roll.Bearing Part No.-0508110046 , Roller Beari Part No.-0508110103 , Roller Bearing Part No.-0508110139 , Roll.Bearing Part No.-0508230500 , Roll.Bearing Part No.-0508232301 , Roll.Bearing Part No.-0509012102 , Roll.Bearing Part No.-0509012103 , Roll.Bearing Part No.-0509012107 , Roll.Bearing Part No.-0509012111 , Roll.Bearing Part No.-0509012112 , Roller Beari Part No.-0509012129 , Rlr Bearing Part No.-0509012130 , Roller Beari Part No.-0509012131 , Roller Beari Part No.-0509012132 , Roll.Bearing Part No.-0509022100 , Roll.Bearing Part No.-0509022200 , Roll.Bearing Part No.-0509022300 , Roll.Bearing Part No.-0509022800 , Needle Carr. Part No.-0515010007 , Needle Carrier Part No.-0515010011 , Needle Carr. Part No.-0515144500 , Need.Bearing Part No.-0515310007 , Needle Beari Part No.-0515310044 , Need.Bearing Part No.-0516150400 , Need.Bearing Part No.-0516150401 , Need.Bearing Part No.-0516153800 , Need.Bearing Part No.-0516162300 , Needle Beari Part No.-0516400025 , Need.Bearing Part No.-0516404500 , Needle Beari Part No.-0516404700 , Need.Bearing Part No.-0516404900 , Inner Ring Part No.-0516410005 , Inner Ring Part No.-0516410025 , Inner Ring Part No.-0516410026 , Inner Ring Part No.-0516413501 , Inner Ring Part No.-0516413901 , Ball Part No.-0517142000 , Smörjnippel Part No.-0544210600 , Fettnippel Part No.-0544215300 , Grease Nipple Part No.-0544216200 , Smörjnippel Part No.-0544256200 , Threaded Pipe Part No.-0551000093 , Pipe Part No.-0560020018 , Pipe Part No.-0560100303 , Elbow Part No.-0560100603 , Elbow Part No.-0560100900 , Elbow Part No.-0560101003 , Elbow Part No.-0560130403 , Bend Part No.-0560130503 , Elbow Part No.-0560130903 , Pipe Fitting Part No.-0560440095 , Pipe Fitting Part No.-0560440101 , Bend Part No.-0562040012 , Pipe Part No.-0564000048 , Pipe Part No.-0564000058 , T-Pipe Part No.-0564000603 , T-Pipe Part No.-0564000703 , T-Pipe Part No.-0564001003 , T-Pipe Part No.-0564013703 , Sleeve Part No.-0570015101 , Sleeve Part No.-0570015104 , Sleeve Part No.-0570015107 , Sleeve Part No.-0570015112 , Sleeve Part No.-0570015113 , Sleeve Part No.-0570015114 , Sleeve Part No.-0570015115 , Sleeve Part No.-0570015116 , Sleeve Part No.-0570015117 , Pipe Socket Part No.-0570016001 , Pipe Socket Part No.-0570016003 , Sleeve Part No.-0570025007 , Sleeve Part No.-0570025008 , Sleeve Part No.-0570025009 , Sleeve Part No.-0570025010 , Sleeve Part No.-0570025011 , Sleeve Part No.-0570025025 , Sleeve Part No.-0570025026 , Sleeve Part No.-0570025027 , Sleeve Part No.-0570025029 , Sleeve Part No.-0570025030 , Sleeve Part No.-0570025032 , Sleeve Part No.-0570025035 , Sleeve Part No.-0570025036 , Sleeve Part No.-0570025038 , Hose Coupling Part No.-0570025042 , Sleeve Part No.-0570025050 , Sleeve Part No.-0570025051 , Sleeve Part No.-0570025052 , Nipple Part No.-0570500006 , Straight Nipple Part No.-0570500502 , Straight Nipple Part No.-0570500503 , Straight Nipple Part No.-0570500512 , Straight Nipple Part No.-0570500518 , Nipple Part No.-0570501001 , Nipple Part No.-0570501006 , Nipple Part No.-0570501007 , Nipple Part No.-0570501009 , Nipple Part No.-0570501010 , Nipple Part No.-0570501011 , Nipple Part No.-0570501012 , Nipple Part No.-0570501013 , Nipple Part No.-0570501014 , Nipple Part No.-0570501016 , Nipple Part No.-0570501017 , Nipple Part No.-0570501018 , Nipple Part No.-0570501019 , Nipple Part No.-0570501020 , Nipple Part No.-0570501021 , Nipple Part No.-0570501022 , Nipple Part No.-0570501024 , Nippel Part No.-0570501030 , Nippel Part No.-0570501031 , Nippel Part No.-0570501034 , Straight Nipple Part No.-0570501049 , Straight Nipple Part No.-0570501050 , Straight Nipple Part No.-0570501095 , Straight Nipple Part No.-0570501096 , Straight Nipple Part No.-0570501097 , Straight Coupl. Part No.-0570501105 , Straight Coupl. Part No.-0570501106 , Nipple Part No.-0570502007 , Nipple Part No.-0570502008 , Nipple Part No.-0570504002 , Nipple Part No.-0570504003 , Nipple Part No.-0570504004 , Nipple Part No.-0570504005 , Nipple Part No.-0570504006 , Nipple Part No.-0570504007 , Straight Nipple Part No.-0570504015 , Nipple Part No.-0570504105 , Nipple Part No.-0570504106 , Nipple Part No.-0570508005 , Nipple Part No.-0570509001 , Nipple Part No.-0570509002 , Nipple Part No.-0570509003 , Nipple Part No.-0570509004 , Nipple Part No.-0570509008 , Nipple Part No.-0570509012 , Nipple Part No.-0570509013 , Nipple Part No.-0570509014 , Nipple Part No.-0570509015 , Nipple Part No.-0570509016 , Nipple Part No.-0570509018 , Nipple Part No.-0570509019 , Nipple Part No.-0570509020 , Nipple Part No.-0570509021 , Nipple Part No.-0570509023 , Nipple Part No.-0570509025 , Nipple Part No.-0570509026 , Nipple Part No.-0570509027 , Nipple Part No.-0570509028 , Nipple Part No.-0570509030 , Nipple Part No.-0570509033 , Nipple Part No.-0570509034 , Nipple Part No.-0570509045 , Nipple Part No.-0570511001 , Nipple Part No.-0570511003 , Nipple Part No.-0570512001 , Nipple Part No.-0570512003 , Nipple Part No.-0570512004 , Nipple Part No.-0570512005 , Nipple Part No.-0570512010 , Nipple Part No.-0570516005 , Adapter Sleeve Part No.-0570519002 , Adapter Sleeve Part No.-0570519003 , Adapter Sleeve Part No.-0570519004 , Adapter Sleeve Part No.-0570519005 , Adapter Sleeve Part No.-0570519006 , Adapter Sleeve Part No.-0570519007 , Adapter Sleeve Part No.-0570519008 , Test Connect Part No.-0570519105 , Test Connection Part No.-0570519106 , Test Connection Part No.-0570519107 , Test Connection Part No.-0570519108 , Test Connect Part No.-0570519109 , Test Connect Part No.-0570519110 , Straight Nipple Part No.-0570700006 , Nipple Part No.-0570700007 , Cap Part No.-0570700008 , Cap Part No.-0570700009 , Cap Part No.-0570700010 , Cap Part No.-0570700011 , Cap Part No.-0570700019 , Cap Part No.-0570700033 , Joint Nipple Part No.-0570700104 , Nipple Part No.-0570700901 , Nipple Part No.-0570700905 , Elbow Nipple Part No.-0570700906 , Swivel Elbow Part No.-0570700908 , Swivel Elbow Part No.-0570700910 , Nipple Part No.-0570700913 , Swivel Elbow Part No.-0570700914 , Swivel Elbow Part No.-0570700915 , Nipple Part No.-0570700918 , Swivel Part No.-0570700919 , Swivel Part No.-0570700921 , Swivel Elbow Part No.-0570700922 , Nipple Part No.-0570700925 , Swivel Part No.-0570700926 , Nipple Part No.-0570700928 , Nipple Part No.-0570701715 , Rak Nippel Part No.-0570702503 , Nipple Part No.-0570702507 , Nipple Part No.-0570702508 , Nipple Part No.-0570702509 , Nipple Part No.-0570702510 , Nipple Part No.-0570702511 , Nipple Part No.-0570702516 , Nipple Part No.-0570702518 , Nipple Part No.-0570702519 , Nipple Part No.-0570702520 , Nipple Part No.-0570702521 , Nipple Part No.-0570702522 , Nipple Part No.-0570702523 , Nipple Part No.-0570702524 , Nipple Part No.-0570702525 , Nipple Part No.-0570702529 , Nipple Part No.-0570702531 , Nipple Part No.-0570702534 , Nipple Part No.-0570702535 , Straight Nipple Part No.-0570702540 , Nipple Part No.-0570702541 , Nipple Part No.-0570702544 , Straight Nipple Part No.-0570703309 , Nipple Part No.-0570704107 , Elbow Nipple Part No.-0570704113 , Elbow Nipple Part No.-0570704114 , Elbow Nipple Part No.-0570704115 , Elbow Nipple Part No.-0570704116 , Elbow Nipple Part No.-0570704117 , Elbow Nipple Part No.-0570704118 , Elbow Nipple Part No.-0570704119 , Elbow Nipple Part No.-0570704121 , Elbow Nipple Part No.-0570704124 , Nipple Part No.-0570704125 , Elbow Nipple Part No.-0570704126 , Elbow Nipple Part No.-0570704127 , Nipple Part No.-0570704129 , Nipple Part No.-0570704132 , Elbow Nipple Part No.-0570704135 , Elbow Nipple Part No.-0570704136 , Elbow Nipple Part No.-0570704137 , Elbow Nipple Part No.-0570704146 , T-Nipple Part No.-0570704902 , T-Nipple Part No.-0570704903 , T-Nipple Part No.-0570704908 , Reducing Bushin Part No.-0570705701 , Reducing Bus Part No.-0570705705 , Reducing Bus Part No.-0570705707 , Reducing Bushin Part No.-0570705710 , Reducing Bushin Part No.-0570705712 , Reducing Bus Part No.-0570705713 , Nut Part No.-0570706503 , Test Connection Part No.-0570706510 , Test Connection Part No.-0570706519 , Test Connection Part No.-0570706522 , Adapter Part No.-0570707307 , Coupling Part No.-0570710004 , Slangkopplin Part No.-0570710008 , Slangkopplin Part No.-0570710009 , Slangkopplin Part No.-0570710010 , Slangkopplin Part No.-0570710011 , Slangkopplin Part No.-0570710012 , Slangkopplin Part No.-0570710013 , Slangkopplin Part No.-0570710016 , Slangkopplin Part No.-0570710017 , Slangkopplin Part No.-0570710018 , Slangkopplin Part No.-0570710019 , Slangkopplin Part No.-0570710020 , Slangkopplin Part No.-0570710021 , Hose Nipple Part No.-0571002062 , Quick Coupli Part No.-0571017002 , Slangledning Part No.-0574000010 , Slangledning Part No.-0574000016 , Slangledning Part No.-0574000021 , Slangledning Part No.-0574000023 , Slangledning Part No.-0574000039 , Hydraulic Ho Part No.-0574000074 , Slangledning Part No.-0574000097 , Slangledning Part No.-0574006307 , Slangledning Part No.-0574006378 , Hyd. Hose Part No.-0574006389 , Slangledning Part No.-0574006406 , Slangledning Part No.-0574006450 , Slangledning Part No.-0574006454 , Slangledning Part No.-0574006463 , Hydraulic Ho Part No.-0574006468 , Slangledning Part No.-0574006471 , Hydr. Hose Part No.-0574006496 , Slangledning Part No.-0574006497 , Hydr. Hose Part No.-0574006513 , Hydraulic Ho Part No.-0574006517 , Hydr. Hose Part No.-0574006541 , Slangledning Part No.-0574006542 , Hydr. Hose Part No.-0574006544 , Hyd. Hose Part No.-0574006563 , Hydr. Hose Part No.-0574006566 , Hydr. Hose Part No.-0574006571 , Slangledning Part No.-0574006588 , Slangledning Part No.-0574006591 , Slangledning Part No.-0574006596 , Hydr. Hose Part No.-0574006621 , Hydr. Hose Part No.-0574006622 , Slangledning Part No.-0574006629 , Hydr. Hose Part No.-0574006707 , Hydr. Hose Part No.-0574006857 , Slangledning Part No.-0574025311 , Slangledning Part No.-0574025511 , Slangledning Part No.-0574025611 , Slangledning Part No.-0574026011 , Slangledning Part No.-0574027811 , Slangledning Part No.-0574031411 , Slangledning Part No.-0574031711 , Slangledning Part No.-0574032011 , Slangledning Part No.-0574032311 , Slangledning Part No.-0574032811 , Slangledning Part No.-0574125411 , Slangledning Part No.-0574126011 , Slangledning Part No.-0574126211 , Slangledning Part No.-0574127211 , Slangledning Part No.-0574127511 , Slangledning Part No.-0574127611 , Slangledning Part No.-0574127711 , Slangledning Part No.-0574128111 , Slangledning Part No.-0574128311 , Slangledning Part No.-0574128511 , Slangledning Part No.-0574128611 , Slangledning Part No.-0574129711 , Slangledning Part No.-0574131611 , Slangledning Part No.-0574132111 , Slangledning Part No.-0574156315 , Slangledning Part No.-0574204372 , Slangledning Part No.-0574204378 , Slangledning Part No.-0574225334 , Slangledning Part No.-0574225511 , Slangledning Part No.-0574225518 , Slangledning Part No.-0574226911 , Slangledning Part No.-0574227311 , Slangledning Part No.-0574227611 , Slangledning Part No.-0574228011 , Slangledning Part No.-0574228311 , Slangledning Part No.-0574228411 , Slangledning Part No.-0574228511 , Slangledning Part No.-0574228611 , Slangledning Part No.-0574228811 , Hydraulich Part No.-0574229411 , Slangledning Part No.-0574231411 , Slangledning Part No.-0574232611 , Slangledning Part No.-0574253711 , Hydraulic Ho Part No.-0574325711 , Slangledning Part No.-0574326111 , Slangledning Part No.-0574326311 , Slangledning Part No.-0574326411 , Hydraulic Ho Part No.-0574326811 , Slangledning Part No.-0574328311 , Slangledning Part No.-0574328511 , Slangledning Part No.-0574328611 , Slangledning Part No.-0574328711 , Slangledning Part No.-0574329511 , Slangledning Part No.-0574333111 , Slangledning Part No.-0574333211 , Slangledning Part No.-0574333411 , Slangledning Part No.-0574351511 , Slangledning Part No.-0574353411 , Hydraulic Ho Part No.-0574426311 , Slangledning Part No.-0574453611 , Hydraulic Ho Part No.-0574454011 , Slangledning Part No.-0574601311 , Slangledning Part No.-0574601911 , Slangledning Part No.-0574780272 , Pipe Coupl. Part No.-0580000200 , Pipe Coupl. Part No.-0580001311 , Pipe Couplin Part No.-0580001350 , Pipe Couplin Part No.-0580001490 , Pipe Couplin Part No.-0580020133 , Pipe Coupl. Part No.-0580040400 , Pipe Coupl. Part No.-0580140200 , Coupling Part No.-0580200200 , Coupling Part No.-0580201407 , Pipe Coupl. Part No.-0580220200 , Pipe Coupl. Part No.-0580223701 , Pipe Couplin Part No.-0580240200 , Pipe Couplin Part No.-0580250105 , Pipe Couplin Part No.-0580250144 , Pipe Couplin Part No.-0580250146 , Pipe Couplin Part No.-0580250147 , Pipe Couplin Part No.-0580250149 , Coupling Part No.-0580460200 , Coupling Part No.-0580840014 , Koppling Part No.-0580840017 , Pipe Couplin Part No.-0581000076 , Sleeve Part No.-0581202512 , Coupling Part No.-0582000700 , Cutting Ring Part No.-0584000400 , Cutting Ring Part No.-0584002400 , Cutting Ring Part No.-0584002500 , Cutting Ring Part No.-0584002700 , Cutting Ring Part No.-0584006200 , Cutting Ring Part No.-0584006600 , Cutting Ring Part No.-0584006700 , Cutting Ring Part No.-0584006800 , Cutting Ring Part No.-0584007100 , Nut Part No.-0584200400 , Nut Part No.-0584202200 , Nut Part No.-0584202400 , Nut Part No.-0584202500 , Nut Part No.-0584202600 , Nut Part No.-0584202700 , Nut Part No.-0584206200 , Nut Part No.-0584206500 , Nut Part No.-0584206600 , Nut Part No.-0584206700 , Nut Part No.-0584206800 , Nut Part No.-0584207400 , Hexagon Nipple Part No.-0603410803 , Sexkantsnipp Part No.-0603420029 , Hexagon Nipple Part No.-0603422500 , Hexagon Nipple Part No.-0603510600 , Hexagon Nipple Part No.-0603512500 , Bushing Part No.-0605830100 , Bushing Part No.-0605830403 , Bushing Part No.-0605850500 , Bushing Part No.-0605850900 , Bushing Part No.-0605851200 , Bushing Part No.-0605851403 , Bushing Part No.-0605852500 , Bushing Part No.-0605852703 , Bushing Part No.-0605853403 , Bushing Part No.-0605853603 , Bushing Part No.-0605870070 , Bushing Part No.-0605871100 , Bushing Part No.-0605880500 , Bushing Part No.-0605880906 , Bushing Part No.-0605881400 , Bushing Part No.-0605881406 , Bushing Part No.-0605881600 , Bushing Part No.-0605883205 , Bushing Part No.-0605883500 , Straight Ada Part No.-0606000001 , Rormuff Part No.-0607110080 , Socket Part No.-0607110503 , Pressure Screw Part No.-0627420006 , Press.Screw Part No.-0627420303 , Pressure Screw Part No.-0627420900 , Pressure Scr Part No.-0627420903 , Thrust Screw Part No.-0627421700 , Pressure Screw Part No.-0627422403 , Pressure Scr Part No.-0627510005 , Press.Screw Part No.-0627511000 , Banjo Connec Part No.-0627850061 , Flange Part No.-0633330700 , Flange Part No.-0633330900 , Flange Half Part No.-0638050002 , Flange Part No.-0638050033 , Flange Half Part No.-0638051500 , Flange Half Part No.-0638052100 , Flange Half Part No.-0638052700 , Flange Half Part No.-0638054500 , Flange Half Part No.-0638054700 , Flange Half Part No.-0638056500 , Flange Half Part No.-0638057100 , Gasket Part No.-0650010114 , Gasket Part No.-0650100118 , Gasket Part No.-0653050068 , Gasket Part No.-0653090506 , Gasket Part No.-0653090511 , Gasket Part No.-0653100300 , Gasket Part No.-0653102600 , Gasket Part No.-0653103300 , Gasket Part No.-0653104100 , Gasket Part No.-0653105500 , Gasket Part No.-0653105700 , Gasket Part No.-0653107000 , Gasket Part No.-0653107600 , Gasket Part No.-0653110000 , Gasket Part No.-0653110100 , Packning Part No.-0653111500 , Gasket Part No.-0653112400 , Gasket Part No.-0653112800 , Gasket Part No.-0653113100 , Gasket Part No.-0653116200 , Gasket Part No.-0653116300 , Gasket Part No.-0653117400 , Gasket Part No.-0653119500 , Gasket Part No.-0653903800 , Gasket Part No.-0657570300 , Seal Washer Part No.-0661100013 , Seal Washer Part No.-0661100500 , Seal Washer Part No.-0661101200 , Seal Washer Part No.-0661101400 , Seal Ring Part No.-0661101500 , Seal Washer Part No.-0661101600 , Sealring Part No.-0661100500 , Seal Washer Part No.-0661102000 , Bondedseal 3/8 Part No.-0661102600 , Seal Washer Part No.-0661103000 , Seal Washer Part No.-0661103300 , Seal Washer Part No.-0661103400 , Seal Washer Part No.-0661103800 , Seal Washer Part No.-0661104900 , Seal Washer Part No.-0661105400 , Seal Washer Part No.-0661105600 , Seal Washer Part No.-0661106200 , Seal Washer Part No.-0661107000 , Ring Part No.-0661150018 , Ring Part No.-0661150036 , Back-Up Ring Part No.-0661150037 , Back-Up Ring Part No.-0661150038 , Back-Up Ring Part No.-0661150044 , Back-Up Ring Part No.-0661150046 , Back-Up Ring Part No.-0661150047 , Back-Up Ring Part No.-0661150049 , Back-Up Ring Part No.-0661150050 , Back-Up Ring Part No.-0661150065 , Back-Up Ring Part No.-0661150066 , Back-Up Ring Part No.-0661150067 , Back-Up Ring Part No.-0661150068 , Back-Up Ring Part No.-0661150069 , Back-Up Ring Part No.-0661150076 , Back-Up Ring Part No.-0661150077 , Back-Up Ring Part No.-0661150095 , Back-Up Ring Part No.-0661150300 , Back-Up Ring Part No.-0661151000 , Back-Up Ring Part No.-0661151200 , Back-Up Ring Part No.-0661151400 , Back-Up Ring Part No.-0661152000 , Back-Up Ring Part No.-0661152600 , Back-Up Ring Part No.-0661152700 , Back-Up Ring Part No.-0661153000 , Back-Up Ring Part No.-0661153600 , Back-Up Ring Part No.-0661153900 , Back-Up Ring Part No.-0661154000 , Back-Up Ring Part No.-0661154700 , Back-Up Ring Part No.-0661156800 , Back-Up Ring Part No.-0661201400 , O-Ring Part No.-0663210026 , O.Ring Part No.-0663210030 , O-Ring Part No.-0663210053 , O-Ring Part No.-0663210054 , O-Ring Part No.-0663210055 , O-Ring Part No.-0663210058 , O-Ring Part No.-0663210061 , O-Ring Part No.-0663210062 , O-Ring Part No.-0663210063 , O-Ring Part No.-0663210075 , O-Ring Part No.-0663210081 , O-Ring Part No.-0663210086 , O-Ring Part No.-0663210109 , O-Ring Part No.-0663210115 , O-Ring Part No.-0663210150 , O-Ring Part No.-0663210158 , O-Ring Part No.-0663210166 , O-Ring Part No.-0663210167 , O-Ring Part No.-0663210168 , O-Ring Part No.-0663210171 , O-Ring Part No.-0663210178 , O-Ring Part No.-0663210180 , O-Ring Part No.-0663210186 , O-Ring Part No.-0663210209 , O-Ring Part No.-0663210215 , O-Ring Part No.-0663210217 , O-Ring Part No.-0663210266 , O-Ring Part No.-0663210306 , O-Ring Part No.-0663210332 , O-Ring Part No.-0663210356 , O-Ring Part No.-0663210358 , O-Ring Part No.-0663210360 , O-Ring Part No.-0663210363 , O-Ring Part No.-0663210364 , O-Ring Part No.-0663210367 , O-Ring Part No.-0663210372 , O-Ring Part No.-0663210390 , O-Ring Part No.-0663210392 , O-Ring Part No.-0663210430 , O-Ring Part No.-0663210431 , O-Ring Part No.-0663210464 , O-Ring Part No.-0663210494 , O-Ring Part No.-0663210531 , O-Ring Part No.-0663210543 , O-Ring Part No.-0663210558 , O-Ring Part No.-0663210559 , O-Ring Part No.-0663210560 , O-Ring Part No.-0663210576 , O-Ring Part No.-0663210577 , O-Ring Part No.-0663210596 , O-Ring D=179 Part No.-0663210600 , O-Ring Part No.-0663210633 , O-Ring Part No.-0663210661 , O-Ring Part No.-0663210662 , O-Ring Part No.-0663210665 , O-Ring Part No.-0663210666 , O-Ring Part No.-0663210750 , O-Ring Part No.-0663210799 , O-Ring Part No.-0663210846 , O-Ring Part No.-0663210877 , O-Ring Part No.-0663210897 , O-Ring Part No.-0663210914 , O-Ring Part No.-0663210917 , O-Ring Part No.-0663210936 , O-Ring Part No.-0663210937 , O-Ring Part No.-0663210971 , O-Ring Part No.-0663210979 , O-Ring Part No.-0663210989 , O-Ring Part No.-0663211000 , O-Ring Part No.-0663211064 , O-Ring Part No.-0663211121 , O-Ring Part No.-0663211131 , O-Ring Part No.-0663211190 , O-Ring Part No.-0663211223 , O-Ring Part No.-0663211262 , O-Ring Part No.-0663211344 , O-Ring Part No.-0663211345 , O-Ring Part No.-0663211346 , O-Ring Part No.-0663211367 , O-Ring Part No.-0663211368 , O-Ring Part No.-0663211400 , O-Ring Part No.-0663211493 , O-Ring Part No.-0663211500 , O-Ring Part No.-0663211600 , O-Ring Part No.-0663211801 , O-Ring Part No.-0663211900 , O-Ring Part No.-0663212000 , O-Ring Part No.-0663212101 , O-Ring Part No.-0663212200 , O-Ring Part No.-0663212700 , O-Ring Part No.-0663212800 , O-Ring Part No.-0663212901 , O-Ring Part No.-0663213100 , O-Ring Part No.-0663213300 , O-Ring Part No.-0663213301 , O-Ring Part No.-0663213400 , O-Ring Part No.-0663213500 , O-Ring Part No.-0663213501 , O-Ring Part No.-0663213800 , O-Ring Part No.-0663214000 , O-Ring Part No.-0663214200 , O-Ring Part No.-0663214300 , O-Ring Part No.-0663214400 , O-Ring Part No.-0663214501 , O-Ring Part No.-0663214600 , O-Ring Part No.-0663214700 , O-Ring Part No.-0663214701 , O-Ring Part No.-0663215000 , O-Ring Part No.-0663215200 , O-Ring Part No.-0663215400 , O-Ring Part No.-0663215500 , O-Ring Part No.-0663215800 , O-Ring Part No.-0663216300 , O-Ring Part No.-0663311700 , O-Ring Part No.-0663312000 , O-Ring Part No.-0663312700 , O-Ring Part No.-0663314000 , O-Ring Part No.-0663314300 , O-Ring Part No.-0663611500 , O-Ring Part No.-0663612100 , O-Ring Part No.-0663612300 , O-Ring Part No.-0663612400 , O-Ring Part No.-0663612700 , O-Ring Part No.-0663613400 , O-Ring Part No.-0663613401 , O-Ring Part No.-0663613500 , O-Ring Part No.-0663613501 , O-Ring Part No.-0663613600 , O-Ring Part No.-0663613800 , O-Ring Part No.-0663613900 , O-Ring Part No.-0663614001 , O-Ring Part No.-0663614100 , O-Ring Part No.-0663614200 , O-Ring Part No.-0663614300 , O-Ring Part No.-0663614400 , O-Ring Part No.-0663614600 , O-Ring Part No.-0663614701 , O-Ring Part No.-0663614900 , O-Ring Part No.-0663615100 , O-Ring Part No.-0663615300 , O-Ring Part No.-0663615500 , O-Ring Part No.-0663616000 , O-Ring Part No.-0663616200 , O-Ring Part No.-0663616600 , O-Ring Part No.-0663616700 , O-Ring Part No.-0663617100 , O-Ring Part No.-0663713400 , O-Ring Part No.-0663713700 , O-Ring Part No.-0663714200 , O-Ring Part No.-0663714500 , O-Ring Part No.-0663714800 , O-Ring Part No.-0663716200 , O-Ring Part No.-0663903201 , O-Ring Part No.-0663903900 , O-Ring Part No.-0663904500 , O-Ring Part No.-0663905001 , O-Ring Part No.-0663905101 , O-Ring Part No.-0663905501 , O-Ring Part No.-0663905600 , O-Ring Part No.-0663907601 , O-Ring Part No.-0663907800 , O-Ring Part No.-0663907801 , O-Ring Part No.-0663909600 , O-Ring Part No.-0663909900 , O-Ring Part No.-0663910400 , O-Ring Part No.-0663910401 , O-Ring Part No.-0663910700 , O-Ring Part No.-0663911200 , O-Ring Part No.-0663911400 , O-Ring Part No.-0663911801 , O-Ring Part No.-0663913200 , O-Ring Part No.-0663915001 , O-Ring Part No.-0663915800 , O-Ring Part No.-0663916900 , O-Ring Part No.-0663917500 , O-Ring Part No.-0663917600 , O-Ring Part No.-0663918201 , O-Ring Part No.-0663919001 , O-Ring Part No.-0663919101 , O-Ring Part No.-0663919500 , O-Ring Part No.-0663919600 , O-Ring Part No.-0663919701 , O-Ring Part No.-0663920200 , O-Ring Part No.-0663920300 , O-Ring Part No.-0663920500 , O-Ring Part No.-0663922500 , O-Ring Part No.-0663937501 , O-Ring Part No.-0663939301 , O-Ring Part No.-0663982200 , O-Ring Part No.-0663987400 , Seal Ring Part No.-0665001012 , Sealring Part No.-0665001016 , Kolvstångstätn. Part No.-0665001018 , Kolvstångstätn. Part No.-0665001023 , Piston Seal Part No.-0665002016 , Kolvtätning Part No.-0665002018 , Piston Seal Part No.-0665002022 , Kolvtätning Part No.-0665002030 , Kolvstångstätn. Part No.-0665003004 , Piston Seal Part No.-0665070025 , Seal Part No.-0665070026 , Sealing Part No.-0665070045 , Piston Rod Seal Part No.-0665070069 , Piston Seal Part No.-0665070140 , Piston Seal Part No.-0665080014 , Seal Part No.-0665080017 , Kolvtätning Part No.-0665080021 , Kolvtätning Part No.-0665080034 , Seal Ring Part No.-0665090014 , Seal Part No.-0665100012 , Seal Part No.-0665100016 , Seal Part No.-0665100017 , Seal Part No.-0665100040 , Seal Part No.-0665100046 , Sealing Part No.-0665100068 , Cup Seal Part No.-0665100072 , Gasket Part No.-0665700111 , Wiper Part No.-0665909913 , Wiper Part No.-0665909914 , Wiper Part No.-0665909929 , Wiper Part No.-0665909933 , Wiper Part No.-0665910013 , Wiper Part No.-0665910014 , Avstrykare Part No.-0665910016 , Avstrykare Part No.-0665910017 , Wiper Part No.-0665910086 , Wiper Part No.-0665910088 , Scal Ring Part No.-0665911000 , Avstrykare Part No.-0665911701 , Avstrykare Part No.-0665917000 , Avstrykare Part No.-0665917001 , Avstrykare Part No.-0665918100 , Avstrykare Part No.-0665921400 , Avstrykare Part No.-0665921800 , Wiper Part No.-0665922400 , Wiper Part No.-0665923200 , Wiper Part No.-0665923201 , Wiper Part No.-0665925801 , Wiper Part No.-0665926200 , Guide Ring Part No.-0665930034 , Guide Ring Part No.-0665930046 , Guide Ring Part No.-0665930064 , Guide Ring Part No.-0665930065 , Guide Ring Part No.-0665930066 , Guide Ring Part No.-0665930067 , Guide Ring Part No.-0665930086 , Seal Ring Part No.-0666200034 , Seal Ring Part No.-0666220700 , Radial Lip S Part No.-0666232900 , Seal Ring Part No.-0666262200 , Radial Lip Seal Part No.-0666425100 , Radialtätning Part No.-0666470400 , Rad.Lip Seal Part No.-0666600010 , Radialtätning Part No.-0666600019 , Rad.Lip Seal Part No.-0666600025 , Rad.Lip Seal Part No.-0666600030 , Radial Seal Part No.-0666600037 , Lip Seal Part No.-0666600039 , Radial Lip S Part No.-0666600048 , Radial Lip S Part No.-0666600056 , Radial Lip S Part No.-0666600059 , Radialtatnin Part No.-0666600063 , Seal Part No.-0666600064 , Radial Lip S Part No.-0666600066 , Radial Lip S Part No.-0666600067 , Radial Lip S Part No.-0666600071 , Radial Lip S Part No.-0666627100 , Rad.Lip Seal Part No.-0666630200 , Rad.Lip Seal Part No.-0666633700 , Seal Ring Part No.-0666643900 , Radial Lip Seal Part No.-0666651800 , Seal Part No.-0666664500 , Rad.Lip Seal Part No.-0666671800 , Rad.Lip Seal Part No.-0666715501 , Radial Lip Seal Part No.-0666718400 , Rad.Lip Seal Part No.-0666718801 , Rad.Lip Seal Part No.-0666719001 , Axial Seal Part No.-0666800010 , Axial Seal Part No.-0666800013 , V-Ring Part No.-0666800017 , Sealring Part No.-0666800023 , Axial Seal Part No.-0666800024 , Axial Seal Part No.-0666800025 , Axial Seal Part No.-0666800026 , Seal, Axial Part No.-0666800027 , Axial Seal Part No.-0666800034 , Axial Seal Part No.-0666800104 , Axial Seal Part No.-0666800704 , Seal Ring Part No.-0666803400 , Axial Seal Part No.-0666804901 , Axial Seal Part No.-0666809201 , Axial Seal Part No.-0666809602 , Axial Seal Part No.-0666809603 , Axial Seal Part No.-0666809702 , Axial Seal Part No.-0666810011 , Seal Part No.-0666810017 , Seal Part No.-0666810053 , Seal Ring Part No.-0666810055 , Seal Ring Part No.-0667114800 , Seal Part No.-0667120600 , Seal Part No.-0667127200 , Seal Ring Part No.-0667411100 , Pistonring Part No.-0680420500 , Piston Ring Part No.-0681521100 , Plug Part No.-0686310300 , Plug Part No.-0686311601 , Plug Part No.-0686370300 , Plug Part No.-0686370600 , Plug Part No.-0686370900 , Plug Part No.-0686371000 , Plug Part No.-0686371200 , Plug Part No.-0686371602 , Plug Part No.-0686371606 , Plug Part No.-0686371607 , Plug Part No.-0686371629 , Plug Part No.-0686371802 , Plug Part No.-0686371803 , Plug Part No.-0686420103 , Plug Part No.-0686420400 , Hexagon Plug Part No.-0686423019 , Hexagon Plug Part No.-0686425500 , Plug Part No.-0686610100 , Plug Part No.-0686644200 , Plug Part No.-0686644203 , Plug Part No.-0686644207 , Plug Part No.-0686644403 , Plug Part No.-0686644704 , Protecting Plug Part No.-0686901054 , Protection Plug Part No.-0686911000 , Plug Part No.-0686925004 , Cap Part No.-0686925022 , Plug Part No.-0686925026 , Plug Part No.-0686925027 , Cap Part No.-0686925028 , Cap Part No.-0686925029 , Cap Part No.-0686925060 , Cap Part No.-0686925061 , Cap Part No.-0686925062 , Cap Part No.-0686925063 , Protec.Cap Part No.-0686925064 , Protec.Cap Part No.-0686925065 , Protection Cap Part No.-0686925227 , Cap Part No.-0687310800 , Plate Part No.-0690111600 , Plate Part No.-0690318100 , Wire Marker Part No.-0694499000 , Cable Lug Part No.-0694511016 , Cable Lug Part No.-0694511017 , Cable Lug Part No.-0694511021 , Cable Lug Part No.-0694511022 , Cable Lug Part No.-0694511026 , Cable Lug Part No.-0694511027 , Cable Lug Part No.-0694511030 , Cable Lug Part No.-0694511031 , Flat Pin Sleeve Part No.-0694528501 , Cable Lug Part No.-0694550500 , Cable Lug Part No.-0694550800 , Cable Lug Part No.-0694551100 , Kabelsko Part No.-0694552000 , Cable Lug Part No.-0694553200 , Cable Lug Part No.-0694553500 , Kabelsko Part No.-0694553800 , Kabelsko Part No.-0694554000 , Kabelsko Part No.-0694554200 , Kabelsko Part No.-0694560001 , Reducer Part No.-0697974528 , Adapter Part No.-0697974531 , Adapter Part No.-0697974544 , Enlarger Part No.-0697974563 , Adapter Part No.-0697974566 , Reducer Part No.-0697974571 , Reducer Part No.-0697974572 , Reducer Part No.-0697974576 , Enlarger Part No.-0697974579 , Enlarger Part No.-0697974580 , Låsmutter Part No.-0697980913 , Låsmutter Part No.-0697980914 , Lock Nut Part No.-0697980915 , Låsmutter Part No.-0697980916 , Lock Nut Part No.-0697980917 , Lock Nut Part No.-0697980918 , Avslutn.Propp Part No.-0697981018 , Avslutn.Propp Part No.-0697981019 , End Plug Part No.-0697981020 , End Plug Part No.-0697981021 , End Plug Part No.-0697981022 , End Plug Part No.-0697981054 , Cable Gland Part No.-0698514006 , Kabelförskruvn. Part No.-0698514008 , Kabelförskruvn. Part No.-0698514014 , Cable Gland Part No.-0698514059 , Cable Gland Part No.-0698514060 , Cable Gland Part No.-0698514061 , Cable Gland Part No.-0698514062 , Cable Gland Part No.-0698514063 , Cable Gland Part No.-0698514064 , Cable Gland Part No.-0698514065 , Cable Gland Part No.-0698514066 , Cable Gland Part No.-0698514091 , Cable Gland Part No.-0698514092 , Cable Gland Part No.-0698514113 , Cable Gland Part No.-0698514140 , Cable Gland Part No.-0698514141 , Cable Gland Part No.-0698514162 , Cable Gland Part No.-0698514170 , Cable Gland Part No.-0698514171 , Cable Seal Part No.-0698514808 , Cable Str.-Way Part No.-0698514809 , Cable Str.-Way Part No.-0698514820 , Box Part No.-0698521100 , Adapter Part No.-0698612608 , Märkhylsa Part No.-0699100000 , Märkhylsa Part No.-0699100100 , Märkhylsa Part No.-0699100300 , Märkhylsa Part No.-0699100400 , Märkhylsa Part No.-0699100500 , Märkhylsa Part No.-0699100600 , Märkhylsa Part No.-0699100700 , Märkhylsa Part No.-0699100800 , Märkhylsa Part No.-0699100900 , Märkhylsa Part No.-0699121300 , Märkhylsa Part No.-0699123100 , Märkhylsa Part No.-0699123200 , Märkhylsa Part No.-0699123300 , Märkhylsa Part No.-0699123700 , Filter Plug Part No.-0803501204 , Hand Pump Part No.-0805000001 , Check Valve Part No.-0823005016 , Check Valve Part No.-0823005017 , Check Valve Part No.-0823005018 , Check Valve Part No.-0823005019 , Check Valve Part No.-0823005020 , Check Valve Part No.-0823005021 , Check Valve Part No.-0823005022 , Check Valve Part No.-0823005023 , Check Valve Part No.-0823005024 , Check Valve Part No.-0823009006 , Check Valve Part No.-0823009007 , Check Valve Part No.-0823009013 , Valve Part No.-0830100767 , Safety Valve Part No.-0830100768 , Safety Valve Part No.-0830100776 , Safety Valve Part No.-0830100844 , Safety Valve Part No.-0834119405 , Safty Valve Part No.-0834119406 , Manometer Part No.-0872100024 , Gauge Part No.-0872100041 , Pressure Gauge Part No.-0872100095 , Control Valve Part No.-1011351080 , El-Motor Part No.-1080234009 , Motor 5,5Kw Part No.-1080288590 , El.Motor Part No.-1080288591 , Circuit Brea Part No.-1081042055 , Kabelsko Part No.-1088000109 , Cable Lug Part No.-1088000124 , Flat Pin Sleeve Part No.-1088000301 , Cable Lug Part No.-1088000304 , Flat Pin Sleeve Part No.-1088000306 , Flatstiftshylsa Part No.-1088000307 , Flat Pin Sleeve Part No.-1088000409 , Kabelsko Part No.-1088018001 , Enlarger Part No.-1088025415 , Gasket Part No.-1088049805 , Assembly Strip Part No.-1088130101 , Bulb Part No.-1089028901 , Solenoid Part No.-1089035161 , Pressure Swi Part No.-1089038953 , Press.Switch Part No.-1089039742 , Soleniod Val Part No.-1089062117 , Fuse Part No.-1089903710 , Contact Block Part No.-1089962205 , Outlet Sect. Part No.-1261050044 , Pr.Red.Valve Part No.-1261100004 , Plug Part No.-1261100005 , End Piece Se Part No.-1261100006 , Spring Set Part No.-5731505487 , Connector Part No.-1261100010 , Sealing Set Part No.-1261100013 , Assy Set Part No.-1261100030 , Sealing Set Part No.-1261100031 , Seal Kit Part No.-1261100057 , Guard Part No.-1503007500 , Damper Part No.-1503020300 , Seal Part No.-1503023400 , Safety Valve Part No.-1503126702 , Silencer Part No.-1503217500 , Cover Part No.-1503246100 , Seal Cord Part No.-1503246700 , Inlet Silenc Part No.-1503285700 , Housing Part No.-1503286000 , Couling Fan Part No.-1503289200 , Valve Kit Part No.-1503580060 , Pr.Rel.Valve Part No.-1503617660 , Pressure Val Part No.-1513040081 , Valve Part No.-1604707982 , Gasket Part No.-1613133027 , Thermostate Part No.-1613688303 , Spring Part No.-1613900400 , Check Valve Part No.-1613900501 , Scavenge Lin Part No.-1613900610 , Gasket Part No.-1613901000 , Lever Gauge Part No.-1613902000 , Pulley Part No.-1613903103 , Lock Part No.-1616494600 , Termostat Part No.-1619733300 , Termostat Part No.-1622706402 , Air Receiver Part No.-2235159800 , Coupling Part No.-2235410313 , Clamp Part No.-2235550152 , Bearing Ring Part No.-2653232294 , Eccentric Lock Part No.-2653232369 , Drain Hose Part No.-2653232492 , Seal Part No.-2653232534 , Sealing Plug Part No.-2653232567 , Plug Part No.-2653232583 , Clip,Retainer Part No.-2658384249 , O-Ring Part No.-2801146430 , Seal Part No.-2807192355 , Seal Part No.-2807192405 , Oi Sep. Kit Part No.-2901000401 , Oil Separato Part No.-2901034301 , Separator Part No.-2901052300 , Oil Sep. Kit Part No.-2901077901 , Repair Kit Part No.-2910301900 , Service Pak Part No.-2912430605 , Serv.Pak 100 Part No.-2912430706 , Spherical Be Part No.-3030049400 , Seal Kit Part No.-3030064590 , Check Valve Part No.-3030067180 , Seal Kit Part No.-3030073390 , Boom/Swing C Part No.-3030076380 , Relief Valve Part No.-3030076780 , Restrictor N Part No.-3030082500 , Parallel Cyl Part No.-3030077700 , Parallel Cyl Part No.-3030077800 , Basket Cylin Part No.-3030077900 , Basket Bolt Part No.-3030078100 , Working Sect Part No.-3030078502 , M.Rel.Valve Part No.-3030078581 , Sep.S.Valve Part No.-3030078582 , Seal Kit Ret Part No.-3030078583 , Anti Load Ch Part No.-3030078586 , Seal Kit Spo Part No.-3217983446 , Seal Kit Part No.-3030078592 , Seal Kit Part No.-3030078594 , Spacer Part No.-3030080500 , Spacer Part No.-3030080600 , Glide Plate Part No.-3030084200 , Shim Plates Part No.-3030084400 , Glide Plate Part No.-3030084500 , Glide Plate Part No.-3030084600 , Shim Plates Part No.-3030085100 , Overc.Valve Part No.-3030091480 , Seal Kit Part No.-3030097590 , Instr. Plate Part No.-3030102700 , Distance Part No.-3030106200 , Valve Part No.-3030122400 , Bult Part No.-3030143500 , Seal Kit Part No.-3030143890 , Seal Kit Part No.-3030144290 , Swivel Part No.-3030146200 , Basket Servi Part No.-3030151400 , Styrplatta Part No.-3030154000 , Styrplatta Part No.-3030154100 , Glide Plate Part No.-3030157200 , Bearing Plat Part No.-3030157300 , Bearing Plat Part No.-3030157400 , Bearing Pla Part No.-3030157500 , Seal Kit Part No.-3030169190 , Basket Part No.-3030179200 , Direct.Valve Part No.-3035331295 , Aux. Contact Part No.-3035331373 , Overload Pro Part No.-3035331454 , Control Box Part No.-3035332351 , Relay Part No.-3035332387 , Extractor Part No.-3091045590 , Hydraulic Ho Part No.-3115000003 , Strap Part No.-3115021200 , Diaphragm Part No.-3115025900 , Valve Part No.-3115026200 , Stop Ring Part No.-3115026800 , Washer Part No.-3115027300 , Gear Wheel Part No.-3115027400 , Coupling Part No.-3115027700 , Side Bolt Part No.-3115028500 , Dome Nut Part No.-3115028600 , Piston Part No.-3115028800 , Shim Part No.-3115029701 , Shim Part No.-3115029702 , Shim Part No.-3115029703 , Shim Set 0,1 Part No.-3115029790 , Mandrel Part No.-3115031200 , Mandrel Part No.-3115031300 , Mandrel Part No.-3115031400 , Extender Part No.-3115031800 , Gasket Part No.-3115032700 , Key Adaptor Part No.-3115034300 , Key Adapter Part No.-3115034400 , Socket Part No.-3115064400 , Driver Part No.-3115071100 , Gear Wheel Part No.-3115080400 , Shaft Part No.-3115082100 , Shaft Compl. Part No.-3115082180 , Shaft Compl. Part No.-3115082181 , Washer Part No.-3115082300 , Sleeve Part No.-3115082400 , Drain Plug Part No.-3115083924 , Sealing Set Part No.-3115083990 , Seal Kit Part No.-3115083991 , Sealing Set Part No.-3115084400 , Sealing Set Part No.-3115084500 , Sleeve Part No.-3115096700 , Seal Kit Part No.-3115097000 , Bushing Part No.-3115097100 , Spring Ring Part No.-3115101074 , Mandrel Part No.-3115101900 , Seal Set Part No.-3115102600 , O-Ring Set Part No.-3115103291 , Cylinder Part No.-3115104700 , Bearing Part No.-3115104800 , Gear Housing Part No.-3115105080 , Bearing Part No.-3115105500 , Gear Wheel Part No.-3115105600 , Hydr.Motor Part No.-3115105884 , Sealing Set Part No.-3115105892 , Sealing Set Part No.-3115106500 , Gasket Part No.-3115107000 , Mandrel Part No.-3115109400 , Plate Part No.-3115109700 , Tool Part No.-3115110000 , Tool Part No.-3115110100 , Mandrel Part No.-3115111300 , Assembl.Tool Part No.-3115112600 , Assembly Tool Part No.-3115112700 , Seal Kit Part No.-3115115600 , Stud Part No.-3115116500 , Bushingcom Part No.-3115120690 , Lock Wire Part No.-3115120800 , Restriction Part No.-3115122600 , Flush.Tube Part No.-3115126700 , Front Head Part No.-3115131880 , Retainer Part No.-3115132000 , Ch.Bushing Part No.-3115132290 , Diaphragm Part No.-3115132400 , Bearing Part No.-3115134000 , Damp.Piston Part No.-3115135300 , Spring Part No.-3115135400 , Stop Ring Part No.-3115143400 , Kit Cop 1238 Part No.-3115143690 , Side Bolt Part No.-3115145700 , Connec.Piece Part No.-3115145800 , Nipple Part No.-3115145900 , Plug Part No.-3115146000 , Front Head Part No.-3115146280 , Retainer Part No.-3115146300 , Stop Ring Part No.-3115146600 , Press Ring Part No.-3115146800 , Rot Chuck Part No.-3115146900 , Driver Part No.-3115147000 , Seal Part No.-3115147600 , Sealing Set Part No.-3115147690 , Front Head Part No.-3115155580 , Driver Part No.-3115158200 , Mandrel Part No.-3115160300 , Nipple Set Part No.-3115160391 , Pulse Unit Part No.-3115160802 , Arm Part No.-3115161100 , Assembl.Tool Part No.-3115162700 , Valve Cover Part No.-3115163600 , Valve Plung Part No.-3115163800 , Cartridge Part No.-3115164800 , Coil Part No.-3115164801 , Seal Kit Part No.-3115164802 , Seal Kit Part No.-3115164803 , Coupling Part No.-3115165300 , Piston Guide Part No.-3115167101 , Piston Guide Part No.-3115167200 , Piston Guide Part No.-3115168001 , Coupling Part No.-3115168400 , Seal Kit Part No.-3115169090 , Overhaul Kit Part No.-3115169091 , Seal Kit Part No.-3115169093 , Overhaul Kit Part No.-3115169094 , Seal Washer Part No.-3115169500 , Seal Washer Part No.-3115169700 , Rot.Chuck Part No.-3115173281 , Nozzle Part No.-3115174606 , End Piece Part No.-3115175500 , Filler Part No.-3115182180 , Diaphragm Part No.-3115182201 , Valve Piston Part No.-3115182300 , Plug Part No.-3115182500 , Piston Guide Part No.-3115183300 , Side Bolt Part No.-3115183600 , Protection Plug Part No.-3115187000 , Assembl.Tool Part No.-3115187700 , Sealing Set Part No.-3115187890 , Seal Kit Part No.-3115187900 , Seal Kit Part No.-3115188000 , Seal Kit Part No.-3115188090 , Assemb.Plate Part No.-3115189700 , Assy.Plate Part No.-3115189800 , Mandrel Part No.-3115189900 , Mandrel Part No.-3115190300 , Diaphragm Part No.-3115192602 , Connect. Plate Part No.-3115515200 , Rotat.Chuck Part No.-3115201480 , Conn. Plate Part No.-3115201901 , Gear Wheel Part No.-3115202200 , Guide Part No.-3115202300 , Driver Part No.-3115203100 , Piston Guide Part No.-3115203500 , Ring Part No.-3115204101 , Stud Part No.-3115204500 , Bushing Part No.-3115204600 , Lock Ring Part No.-3115205100 , Seal Housing Part No.-3115205200 , Sealing Set Part No.-3115205300 , Sealing Set Part No.-3115205400 , Sealing Set Part No.-3115205500 , Driver Part No.-3115206500 , Sealing Set Part No.-3115207290 , Sealing Set Part No.-3115207490 , Valve Cover Part No.-3115207604 , Valve Cover Part No.-3115207605 , Valve Cover Part No.-3115207703 , Valve Cover Part No.-3115207704 , Valve Cover Part No.-3115207705 , Flush.Head Part No.-3115207900 , Spacer Ring Part No.-3115209100 , Valve Seat Part No.-3115209900 , Valve Cone Part No.-3115210000 , Side Bolt Part No.-3115211301 , Conn. Plate Part No.-3115211400 , Sealing Set Part No.-3115211600 , Guide Part No.-3115211800 , Repair Set Part No.-3115211890 , Guide Part No.-3115211900 , Repair Set Part No.-3115211990 , Flush. Head Part No.-3115212000 , Flush. Head Part No.-3115212100 , Stop Ring Part No.-3115212200 , Stop Ring Part No.-3115212380 , Piston Guide Part No.-3115212400 , Piston Part No.-3115212600 , Piston Part No.-3115212900 , Piston Kit Part No.-3115212990 , Spacer Ring Part No.-3115214700 , Stud Part No.-3115214800 , Stud Part No.-3115214900 , Sealing Set Part No.-3115215000 , Check Valve Part No.-3115215300 , Mandrel Part No.-3115216300 , Ass.Fixture Part No.-3115216880 , Check Valve Part No.-3115219681 , Stud Part No.-3115222100 , Side Bolt Part No.-3115222200 , Guide Part No.-3115222302 , Pressing Too Part No.-3115222880 , Drill Collar Part No.-3115223100 , Drill Collar Part No.-3115223200 , Drill Collar Part No.-3115223300 , Exten.Tool Part No.-3115224700 , Press Tool Part No.-3115225000 , Press Tool Part No.-3115225100 , Press Tool Part No.-3115225200 , Press Tool Part No.-3115225300 , Press Tool Part No.-3115225600 , Press Tool Part No.-3115225800 , Mandrel Part No.-3115226200 , Flush Head Part No.-3115227301 , Clamp Part No.-3115227500 , Holder Part No.-3115227580 , Drill Collar Part No.-3115227900 , Flush.Head Part No.-3115229600 , Flush. Head Part No.-3115229700 , Flush.Head Part No.-3115231500 , Gear Housing Part No.-3115234080 , Piston Guide Part No.-3115236200 , Drill Collar Part No.-3115236300 , Seal Part No.-3115237200 , Extr.Piston Part No.-3115237300 , Socket Part No.-3115237900 , Tube Cover Part No.-3115238000 , Valve Cone Part No.-3115238300 , Valve Seat Part No.-3115238400 , Cup Seal Part No.-3115238500 , Cup Seal Part No.-3115238600 , Mandrel Part No.-3115239300 , Plug Part No.-3115240100 , Press.Tool Part No.-3115241000 , Press.Tool Part No.-3115241100 , Guide Ring Part No.-3115242300 , Flush. Head Part No.-3115242700 , Stop Ring Part No.-3115242800 , Cover, Compl Part No.-3115242980 , Rot.Chuck Part No.-3115243100 , Piston Part No.-3115243300 , Seal Housing Part No.-3115243580 , O-Ring Part No.-3115245002 , Side Bolt Part No.-3115245500 , Side Bolt Part No.-3115245600 , Cup Seal Part No.-3115246200 , Guide Part No.-3115246300 , Valve Cover Part No.-3115246800 , Diaphragm Part No.-3115247200 , Tight. Tool Part No.-3115251900 , Shim 0,10 Part No.-3115254101 , Shim 0,15 Part No.-3115254102 , Shim 0,50 Part No.-3115254103 , Guide Part No.-3115254500 , Interm.Shaft Part No.-3115254700 , Shaft Part No.-3115254800 , Gear Wheel Part No.-3115255100 , Bushing Part No.-3115255200 , Sealing Set Part No.-3115255400 , Sealing Set Part No.-3115255900 , Intermed. Part Part No.-3115258345 , Interm. Compl. Part No.-3115258381 , Diaphr.Supp. Part No.-3115259500 , Seal Housing Part No.-3115259780 , Tube Part No.-3115261520 , Accumulator Part No.-3115261590 , Plug Part No.-3115261710 , Plug Part No.-3115261720 , End Piece Part No.-3115261800 , Guide Part No.-3115262000 , Piston Guide Part No.-3115262600 , Extend.Piece Part No.-3115264800 , Rot.Chuck Part No.-3115264980 , Driver Part No.-3115265000 , Side Bolt Part No.-3115265200 , Side Bolt Part No.-3115265300 , Cup Seal Part No.-3115269300 , Screw Part No.-3115270210 , Accumulator Part No.-3115270480 , Accumulator Part No.-3115270880 , Sealing Set Part No.-3115272100 , Disass.Tools Part No.-3115272480 , Mandrel Part No.-3115273700 , Mandrel Part No.-3115273900 , Guide Sleeve Part No.-3115274200 , Lock Ring Part No.-3115274500 , Cup Seal Part No.-3115274600 , Seal Housing Part No.-3115276080 , Seal Housecomp Part No.-3115276680 , Seal Housing Part No.-3115277180 , Seal Housecom Part No.-3115277280 , Seal Housing Part No.-3115277380 , Seal Kit Part No.-3115279000 , Seal Kit Part No.-3115281300 , Piston Part No.-3115282300 , Seal Housing Part No.-3115282780 , Damp.Piston Part No.-3115283100 , Regulat. Pin Part No.-3115283200 , Piston Part No.-3115283800 , Valve Piston Part No.-3115284800 , Assembl.Tool Part No.-3115285980 , Seal Set Part No.-3115286900 , Front Part C Part No.-3115287181 , Front Part C Part No.-3115287183 , Extr.Piston Part No.-3115287300 , Cover, Compl Part No.-3115287480 , Damp. Piston Part No.-3115288300 , Pipe Part No.-3115288600 , Connect. Plate Part No.-3115288780 , Pressure Screw Part No.-3115288800 , Pressure Scr Part No.-3115288900 , Overhaul Kit Part No.-3115290001 , Sealing Kit Part No.-3115290002 , Accumulator Part No.-3115290080 , Diaphr.Supp Part No.-3115290100 , Spring Part No.-3115290300 , Driver Part No.-3115291100 , Front Part Part No.-3115292700 , Seal Kit Part No.-3115293800 , Anvil Part No.-3115294002 , Ventilator Part No.-3115294500 , Drill Collar Part No.-3115294700 , Cover Compl. Part No.-3115294981 , Front Part Part No.-3115295000 , Front Head C Part No.-3115295080 , Front Head C Part No.-3115295081 , Front Head Part No.-3115295083 , Front Head Comp Part No.-3115295085 , Extr. Piston Part No.-3115296400 , Guide Part No.-3115296500 , Seal Kit Part No.-3115296600 , Gear Housing Part No.-3115296780 , Rot.Ch.Bushi Part No.-3115600488 , Seal Kit Part No.-3115296900 , Damp.Piston Part No.-3115297100 , Seal Housing Part No.-3115297280 , Piston Guide Part No.-3115297500 , Seal Housing Part No.-3115297680 , Sela Kit Part No.-3115297800 , Piston Part No.-3115298101 , Seal Ring Part No.-3115298800 , Stop Ring Part No.-3115299000 , Mandrel Part No.-3115300400 , Seal Ring Part No.-3115300500 , Tool Set Part No.-3115301597 , Front Head Part No.-3115301810 , Guide Part No.-3115301901 , Stop Ring Part No.-3115302001 , Distans/Spac Part No.-3115302101 , Flushing Hea Part No.-3115302201 , Side Bolt Part No.-3115302301 , Wiper Part No.-3115302400 , Front Part C Part No.-3115303280 , Cover Compl. Part No.-3115303380 , Cover Compl. Part No.-3115304080 , Cup Seal Part No.-3115304400 , Seal Retaine Part No.-3115304600 , Attachment Part No.-3115304700 , Seal Ring Part No.-3115304800 , Stud Part No.-3115304900 , Dome Nut Part No.-3115305000 , Stud Part No.-3115305200 , Valve Cover Part No.-3115305300 , Valve Cover Part No.-3115305400 , Stud Part No.-3115305500 , Stud Part No.-3115305600 , Dowel Part No.-3115306100 , Sleeve Part No.-3115306400 , Drill Collar Part No.-3115306500 , Sleeve Part No.-3115307200 , Stud Part No.-3115307300 , Stud Part No.-3115307400 , Stud Part No.-3115307500 , Spacer Part No.-3115307600 , Coupling Part No.-3115307700 , Seal Kit Part No.-3115308000 , Seal Retain Part No.-3115308100 , Bushing Part No.-3115308700 , Piston Part No.-3115309101 , Piston Guide Part No.-3115309300 , Piston Guide Part No.-3115309400 , Piston Part No.-3115309600 , Gear Wheel Part No.-3115310300 , Valve Piston Part No.-3115311100 , Damp.Piston Part No.-3115311500 , Nozzle D 1,7 Part No.-3115312200 , Seal Housec Part No.-3115314080 , Connection Part No.-3115314700 , Valve Piston Part No.-3115314800 , Connect. Pla Part No.-3115314900 , Stop Ring Part No.-3115315800 , Extr. Piston Part No.-3115316500 , Piston Part No.-3115317000 , Piston Part No.-3115317100 , Guide Sleeve Part No.-3115317800 , Mandrel Part No.-3115318200 , Fixture Part No.-3115318300 , Cup Seal Part No.-3115318400 , Wiper Part No.-3115318500 , Flushing Hea Part No.-3115319080 , Flush Head C Part No.-3115319081 , Cover Part No.-3115319100 , Spacer Part No.-3115319200 , Side Bolt Part No.-3115319300 , Stud Part No.-3115319400 , Guide Part No.-3115319600 , Guide Part No.-3115319603 , Guide Part No.-3115319700 , Guide Part No.-3115319703 , Wiper Part No.-3115319800 , Seal Retaine Part No.-3115319900 , Guide Plate Part No.-3115320200 , Pressing Too Part No.-3115320300 , Assembly Too Part No.-3115320400 , Connection P Part No.-3115320910 , Nut Part No.-3115321400 , Seal Ring Part No.-3115321900 , Reg. Plug Part No.-3115322300 , Seal Kit Part No.-3115322690 , Mutter Part No.-3115322700 , Grouting Uni Part No.-3115323000 , Sealing Kit Part No.-3115323090 , Attachment Part No.-3115323200 , Pin Part No.-3115323400 , Wiper Part No.-3115323600 , Cylinder Sle Part No.-3115323801 , Stoppring/St Part No.-3115323901 , Bushing Part No.-3115324300 , Piston Part No.-3115324400 , Seal Ring Part No.-3115324500 , Front Part Part No.-3115324600 , Front Part C Part No.-3115324680 , Front Part C Part No.-3115324682 , Front Part Comp Part No.-3115324682 , Cylinder Part No.-3115324800 , Guide Part No.-3115325100 , Seal Ring Ho Part No.-3115325200 , Stop Washer Part No.-3115325400 , Stop Ring Part No.-3115325500 , Flushing Ada Part No.-3115325600 , Bushing Part No.-3115325700 , Liner Part No.-3115325800 , Damping Piston Part No.-3115325901 , Back Up Ring Part No.-3115326100 , Rot.Chuck Part No.-3115326200 , Cover Part No.-3115326300 , Driver Part No.-3115326400 , Driver Part No.-3115326401 , Back Up Ring Part No.-3115326500 , Gear Wheel Part No.-3115326600 , Valve Seat Part No.-3115326900 , Liner Part No.-3115327000 , Seal Housing Part No.-3115327200 , Guide Housin Part No.-3115327300 , Piston Guide Part No.-3115327400 , Seal Housing Part No.-3115327500 , Piston Part No.-3115327601 , Valve Piston Part No.-3115327700 , Valve Cover Part No.-3115600275 , Valve Cover Part No.-3115600277 , Wear Plug Part No.-3115328000 , Side Bolt Part No.-3115328100 , Wiper Part No.-3115328201 , Wiper Part No.-3115328202 , Cup Seal Part No.-3115328301 , Seal Kit Part No.-3115328401 , Seal Kit Part No.-3115328402 , Seal Kit Part No.-3115328602 , Seal Kit Part No.-3115328605 , Wiper Part No.-3115328802 , Wiper Part No.-3115328805 , Seal Ring Part No.-3115328901 , Seal Ring Part No.-3115328902 , Seal Ring Part No.-3115328905 , Seal Ring Part No.-3115328906 , Seal Ring Part No.-3115328907 , Seal Ring Part No.-3115328909 , Seal Ring Part No.-3115328910 , Seal Ring Part No.-3115328911 , Seal Ring 324 13 Part No.-3115328913 , Seal Ring Part No.-3115328917 , Seal Ring 322 13 Part No.-3115328923 , Seal Ring Part No.-3115329002 , Seal Ring 342 13 Part No.-3115329018 , Guide Part No.-3115329400 , Flushing Hea Part No.-3115329580 , Guide Part No.-3115329700 , Guide Part No.-3115329800 , Set Of Seals Part No.-3115331300 , Set Of Seals Part No.-3115331400 , Dome Nut Part No.-3115331500 , Stud Part No.-3115331800 , Stud Part No.-3115331900 , Stud Part No.-3115332000 , Dome Nut Part No.-3115332200 , Rot.Chuck,Co Part No.-3115332480 , Flush Head C Part No.-3115332580 , Guide Part No.-3115332600 , Stop Ring Part No.-3115332701 , Driver Part No.-3115333000 , Piston Guide Part No.-3115336200 , Cup Seal Part No.-3115336300 , Cup Seal Part No.-3115336500 , Guide Part No.-3115336800 , Flushing Head Part No.-3115337001 , Stop Washer Part No.-3115337100 , Stop Ring Part No.-3115337200 , Cop Grease, Part No.-3115342300 , Bottle Conne Part No.-3115342502 , Charging Hose Part No.-3115342503 , Manometer Part No.-3115342504 , Manometer Part No.-3115342505 , Manometer Part No.-3115342506 , Regulator Part No.-3115342507 , Needle Valve Part No.-3115342508 , Connection Part No.-3115342510 , Piston Part No.-3115342600 , Piston Part No.-3115342700 , Driver Part No.-3115343100 , Rot.Chuck,Co Part No.-3115343280 , Gear Housing Part No.-3115343400 , Seal Retaine Part No.-3115343601 , Shaft Part No.-3115343900 , Damping Pist Part No.-3115344100 , Guide Part No.-3115344200 , Flushing Hea Part No.-3115344300 , Connection P Part No.-3115344410 , Flushing Hea Part No.-3115344800 , Flushing Ada Part No.-3115344900 , Cover Cpl Part No.-3115345080 , Conn.Plate Part No.-3115345500 , Holder Plate Part No.-3115345700 , Hydraulic Motor Part No.-3115347380 , Hydraulic Mo Part No.-3115347382 , Hydraulic Motor Part No.-3115347383 , Hydraulmotor Part No.-3115347384 , Hydraulic Motor Part No.-3115347385 , Hydraulic Mo Part No.-3115347386 , Seal Kit Part No.-3115347390 , Liner Part No.-3115347400 , Liner Part No.-3115348800 , Mandrel Part No.-3115349000 , Guide Ring Part No.-3115349300 , Mandrel Part No.-3115349400 , Damping Pist Part No.-3115349700 , Hydraulmotor Part No.-3115350482 , Seal Kit Part No.-3115350599 , Hydraulic Mo Part No.-3115350781 , Hydraulmotor Part No.-3115350782 , Hydraulmotor Part No.-3115350783 , Hydraulmotor Part No.-3115350784 , Seal Kit Part No.-3115350790 , Guide Part No.-3115350800 , Guide Part No.-3115351500 , Bushing Part No.-3115351700 , Guide Part No.-3115351800 , Flushing Hea Part No.-3115351900 , Retaining Ring Part No.-3115352000 , Wrench Adapt Part No.-3115352100 , Cover Compl. Part No.-3115352480 , Seal Retaine Part No.-3115352800 , Hydraulic Mo Part No.-3115352983 , Seal Kit Part No.-3115353700 , Hydraulmotor Part No.-3115354381 , Seal Kit Part No.-3115354390 , Kolv Part No.-3115354400 , Seal Kit Part No.-3115354500 , Mutter/Nut Part No.-3115354800 , Rotation Chu Part No.-3115355000 , Frontdel Part No.-3115355400 , Shims 0,50 Part No.-3115355903 , Diaphragm Part No.-3115357200 , Piston Guide Part No.-3115357400 , Seal Kit Part No.-3115359000 , Stop Ring Part No.-3115359200 , Diaphragm Part No.-3115359300 , Accumulat. Assy Part No.-3115359481 , Hydraulic Motor Part No.-3115566983 , Hydraulic Motor Part No.-3115566981 , Piston Part No.-3115360000 , Seal Housing Part No.-3115360180 , Seal Kit Part No.-3115360200 , Piston Guide Part No.-3115360301 , Flush Hose Part No.-3115360500 , Spacer Part No.-3115361000 , Side Bolt Part No.-3115361100 , Stud Part No.-3115361200 , Stud Part No.-3115361300 , Guide Piston Part No.-3115361900 , Piston Guide Part No.-3115362000 , Motor Bracke Part No.-3115362100 , Stop Ring Part No.-3115362200 , Rot.Chuck,Co Part No.-3115362380 , Flushing Tub Part No.-3115362500 , Piston Part No.-3115363504 , Gear Housing Part No.-3115371100 , Bushing Part No.-3115374400 , Valve Part No.-3115376800 , Extractor 45 65 Part No.-3115380400 , Seal Kit Part No.-3115500019 , Seal Kit Part No.-3115500020 , Piston Guide Part No.-3115500139 , Seal Kit Part No.-3115502300 , Gear Housingv Part No.-3115503581 , Cover Part No.-3115503610 , Cover Compl. L Part No.-3115503680 , Side Bolt Part No.-3115504000 , Front Part Part No.-3115504200 , Front Part Comp Part No.-3115504280 , Conversion Kit Part No.-3115504293 , Flushing Head Part No.-3115504405 , Flushing Head Part No.-3115504410 , Guide Part No.-3115504501 , Guide Part No.-3115504511 , Guide Part No.-3115504521 , Spacer 118 12 Part No.-3115505910 , Seal Ring Part No.-3115514601 , Pipe,Compl. Part No.-3115520580 , Front Part Part No.-3115520700 , Front Part Comp Part No.-3115520780 , Rotation Chu Part No.-3115522380 , Driver Part No.-3115522600 , Rot.Chuck Part No.-3115522700 , Assembly Tool Part No.-3115525180 , Disassemb.Tools Part No.-3115525500 , Interm. Comp Part No.-3115527480 , Seal Housec Part No.-3115527580 , Rot.Chuck, Part No.-3115531380 , Conversionk Part No.-3115531390 , Driver 260 13 Part No.-3115531400 , Stop Ring Part No.-3115534090 , Disk Spring 326 13 Part No.-3115536000 , Turning Device Part No.-3115545280 , Washer Part No.-3115555800 , Conversion Kit Part No.-3115561693 , Hydraulic Mo Part No.-3115566982 , Cup Seal Part No.-3115571800 , Screw 33 51 Part No.-3115581203 , Screw 33 53 Part No.-3115581204 , Screw 33 55 Part No.-3115581205 , Screw 33 57 Part No.-3115581207 , Seal Kit Part No.-3115901163 , Seal Kit Part No.-3115901164 , Rebuilding S Part No.-3115901165 , Seal Kit Part No.-3115901390 , O-Ring Set Part No.-3115915093 , Seal Kit1238 Part No.-3115915095 , Seal Kit Part No.-3115915096 , Seal Kit Part No.-3115915097 , Seal Kit Part No.-3115915099 , Seal Kit Part No.-3115915191 , Overhaul Kit Part No.-3115915192 , O-Ring Set Part No.-3115915390 , Seal Kit Part No.-3115915392 , Overhaul Kit Part No.-3115915393 , Seal Kit Part No.-3115915395 , Overhaul Kit Part No.-3115915399 , Seal Kit Part No.-3115915491 , Seal Kit Part No.-3115915492 , Overhaul Kit Part No.-3115915498 , O-Ring Set Part No.-3115915590 , Overhaul Kit Part No.-3115915592 , Seal Kit Part No.-3115915595 , O-Ring Set Part No.-3115915691 , Seal Kit Part No.-3115915693 , Seal Kit Part No.-3115915694 , Seal Kit Part No.-3115915791 , Overhaul Kit Part No.-3115915792 , Seal Kit Part No.-3115915890 , Overhaul Kit Part No.-3115915891 , Seal Kit Part No.-3115915893 , Overhaul Kit Part No.-3115915894 , Overhaul Kit Part No.-3115915991 , Overhaul Kit Part No.-3115915994 , Seal Kit Part No.-3115916091 , Seal Set Part No.-3115916190 , Seal Kit Part No.-3115916290 , Overhaul Kit Part No.-3115916292 , Seal Kit Part No.-3115916390 , Seal Kit Part No.-3115916490 , Overhaul Kit Part No.-3115916491 , Overhaul Kit Part No.-3115916493 , Seal Kit Part No.-3115916590 , Seal Kit Part No.-3115916790 , Overhaul Kit Part No.-3115916791 , Seal Kit Part No.-3115916890 , Overhaul Kit Part No.-3115916891 , Overhaul Kit Part No.-3115916893 , Seal Kit Part No.-3115916995 , Overhaul Kit Part No.-3115916996 , Overhaul Kit Part No.-3115916997 , O-Ring S Part No.-3115917090 , Seal Kit T Part No.-3115917091 , Overhaul Kit Part No.-3115923890 , Overhaul Kit Part No.-3115923891 , Repair Kit Part No.-3115923892 , Overhaul Kit Part No.-3115923893 , Overhaulkit R Part No.-3115923894 , Overhaul Kit Part No.-3115924090 , Seal Kit Part No.-3115926290 , Repair Kit Part No.-3115926291 , Repair Kit Part No.-3115926292 , Seal Kit Part No.-3115926390 , Repair Kit Part No.-3115926391 , Repair Kit Part No.-3115926392 , Seal Kit Part No.-3115926690 , Seal Kit Part No.-3115936090 , Sealkit Part No.-3115936092 , Seal Kit Part No.-3115946090 , Gummiring Part No.-3122030900 , Dowel Part No.-3125063400 , Yoke Part No.-3125063700 , Valve Coil Part No.-3125090600 , Valve Unit Part No.-3125090690 , Valve Unit Part No.-3125090691 , Valve Unit Part No.-3125090692 , Compress.Spring Part No.-3125090700 , Wire Rope Part No.-3125101003 , Exp.Shaft Part No.-3125197480 , Exp.Shaft Part No.-3125197980 , Exp.Axel Part No.-3125198180 , Exp.Shaft Part No.-3125198181 , Axel Part No.-3125198200 , Exp.Axel Part No.-3125198280 , Exp.Shaft Part No.-3125198380 , Tube Part No.-3125199600 , Pipe Part No.-3125199700 , Hose Protection Part No.-3125199780 , Distansring Part No.-3125200200 , Distansring Part No.-3125200500 , Connec.Block Part No.-3125204500 , Tube Part No.-3125204900 , Bushing Part No.-3125217700 , Bushing Part No.-3125217800 , Bushing Part No.-3125217900 , Spring Part No.-3125228900 , Bearing Housing Part No.-3125238800 , Collec.Block Part No.-3125252500 , Ring Part No.-3125268203 , Pr.Rel.Valve Part No.-3125279403 , Restriction Part No.-3125279702 , Seal Kit Part No.-3125298190 , W.Out P.Set Part No.-3125298290 , Attachment Part No.-3125304400 , Joint Nipple Part No.-3125305400 , Exp.Shaft Part No.-3125307180 , Exp.Shaft Part No.-3125307181 , Bushing Part No.-3125307200 , Spacer Part No.-3125307300 , Bushing Part No.-3125307500 , Exp.Shaft Part No.-3125307780 , Bushing Part No.-3125307800 , Bolt Part No.-3125307900 , Skyltsats Part No.-3125318890 , Bushing Part No.-3125484900 , Cover Part No.-3125485000 , Boom Support Part No.-3125485582 , Extension Tube Part No.-3125487301 , Bearing Hous Part No.-3125488903 , Bearing Hous Part No.-3125488983 , Key Part No.-3125492190 , Mellanlägg Part No.-3125492400 , Nippel Part No.-3125493200 , Bushing Part No.-3125493700 , Exp.Axel Part No.-3125493780 , Bushing Part No.-3125494000 , Cover Part No.-3125494100 , Bearing Hous Part No.-3125494403 , Bearing Hous Part No.-3125494486 , Exp.Shaft Part No.-3125494680 , Joint Nipple Part No.-3125495000 , Exp.Shaft Part No.-3125495280 , Bushing Part No.-3125495300 , Bricka Part No.-3125496300 , Bushing Part No.-3125496400 , Bushing Part No.-3125496500 , Exp.Axel Part No.-3125496880 , Bushing Part No.-3125496900 , Ring Part No.-3125497400 , Cradle Part No.-3125497601 , Housing Part No.-3125502800 , Ring Part No.-3125502900 , Spacer Part No.-3125503000 , Piston Part No.-3125503100 , Shaft Part No.-3125503700 , Restriction Part No.-3125535000 , Pr.Rel.Valve Part No.-3125566200 , Seal Kit Part No.-3125566280 , Seal Kit Part No.-3125566281 , Gasket Set Part No.-3125900390 , Check Valve Part No.-3125900400 , Check Valve Part No.-3125900401 , Check Valve Part No.-3125900403 , Direct.Valve Part No.-3125900502 , Bushing Part No.-3128000300 , Bushing Part No.-3128000900 , Dowel Part No.-3128001502 , Rubber Cloth Part No.-3128001717 , Cover Plate Part No.-3128001759 , Cover Plate Part No.-3128001762 , Attachment Part No.-3128001802 , Attachment Part No.-3128001815 , Front Plate Part No.-3128001860 , Flexible Pip Part No.-3128001891 , Bracket Part No.-3128001895 , Packning Part No.-3128001996 , Seal Set Part No.-6060015351 , Distance Pla Part No.-3128003009 , Protect. Cov Part No.-3128003019 , Guide Spindl Part No.-3128003076 , Dowel Part No.-3128003100 , Plunge Part No.-3128003101 , Shaft Part No.-3128003113 , Bearing Hous Part No.-3128003114 , Bearing Hous Part No.-3128003115 , Spacer Ring Part No.-3128003116 , Shaft Part No.-3128003117 , Cover Part No.-3128003118 , Skydd Part No.-3128003119 , Clamp Part No.-3128003136 , Expanding Sh Part No.-3128003155 , Segment Part No.-3128003239 , Segment Part No.-3128003243 , Segment Part No.-3128003255 , Slide Bar Part No.-3128003401 , Slide Bar Part No.-3128003405 , Slide Bar Part No.-3128003406 , Damper Part No.-3128003700 , Holder Part No.-3128008200 , Holder Part No.-3128008300 , Dowel Part No.-3128009000 , Rubber Cloth Part No.-3128009400 , Protect.Coil Part No.-3128022400 , Protect.Coil Part No.-3128022500 , Protect.Coil Part No.-3128022501 , Protect.Coil Part No.-3128022800 , Protect.Coil Part No.-3128022801 , Attachment Part No.-3128024400 , Attachment Part No.-3128025102 , Cyl.Protect. Part No.-3128025110 , Cyl.Protect. Part No.-3128026900 , Cyl.Protect. Part No.-3128027501 , Cyl.Protect. Part No.-3128027502 , Chain Part No.-3128028700 , Angle Plate Part No.-3128028901 , Chain Part No.-3128028902 , Ring Pin Part No.-3128028903 , Chain Part No.-3128028904 , Chain Part No.-3128028905 , Chain Part No.-3128028907 , Planet Carrier Part No.-3128038900 , Cradle Part No.-3128041007 , Cradle Part No.-3128041008 , Cradle Part No.-3128041038 , Tube Part No.-3128042700 , Guide Strip Part No.-3128042802 , Holder Part No.-3128042900 , Gliding Pce Part No.-3128043000 , Shim Part No.-3128043200 , Bushing Part No.-3128044600 , Slide Bar Part No.-3128045801 , Slide Bar Part No.-3128045802 , Slide Bar Part No.-3128045804 , Slide Bar Part No.-3128045807 , Slide Bar Part No.-3128045810 , Slide Bar Part No.-3128045815 , Slide Bar Part No.-3128045818 , Slide Bar Part No.-3128045824 , Slide Bar Part No.-3128045868 , Guide Ring Part No.-3128046300 , Gear Wheel Part No.-3128046400 , Protect.Coil Part No.-3128046800 , Flange Part No.-3128047200 , Bricka Part No.-3128047600 , Washer Part No.-3128047800 , Spacer Part No.-3128047900 , Pin Part No.-3128048000 , Bricka Part No.-3128048200 , Bearing Washer Part No.-3128048300 , Plåt Part No.-3128048500 , Pipe Part No.-3128048600 , Gear Ring Part No.-3128048800 , Seal Part No.-3128048806 , Spacer Part No.-3128049000 , Spacer Part No.-3128049100 , Spacer Part No.-3128049200 , Sleeve Part No.-3128049401 , Cover Part No.-3128049700 , Shaft Part No.-3128051800 , Cover Part No.-3128052500 , Shim Part No.-3128052600 , Return Rope Part No.-3128055101 , Guide Part No.-3128055301 , Wear Plate Part No.-3128055400 , Wear Plate Part No.-3128055401 , Wear Plate Part No.-3128055402 , Guide List Part No.-3128055500 , Guide List Part No.-3128055600 , Guide Part No.-3128055601 , Shim Part No.-3128055700 , Shim Part No.-3128055800 , Cap Part No.-3128060300 , Ring Part No.-3128061600 , Gasket Part No.-3128061801 , Gasket Part No.-3128061802 , Gasket Part No.-3128061805 , Gasket Part No.-3128061807 , Ring Part No.-3128063100 , Tightn. Unit Part No.-3128063900 , Key Part No.-3128064600 , Pull Rope Part No.-3128064701 , Adjust. Tool Part No.-3128067202 , Spacer Part No.-3128068200 , Spacer Part No.-3128068300 , Spring Part No.-3128068900 , Spring Part No.-3128069000 , Spacer Part No.-3128069100 , Bushing Half Part No.-3128069304 , Bushing Half Part No.-3128069305 , Bushing Half Part No.-3128069403 , Bushing Half Part No.-3128069404 , Bushing Part No.-3128070900 , Bracket Part No.-3128071000 , Limit Switch Part No.-3128071090 , Impulsgivarsats Part No.-3128071092 , Angle Part No.-3128071100 , Clamp Part No.-3128076800 , Wire Rope Part No.-3128078086 , Spacer Part No.-3128078196 , Nippel Part No.-3128078266 , Data Plate Part No.-3128078273 , Lower Part Part No.-3128078285 , Top Part Part No.-3128078287 , End Plate Part No.-3128078288 , Attachment Part No.-3128078360 , Attachment Part No.-3128078367 , Hose Guide Part No.-3128078370 , Slid.Block Part No.-3128078386 , Drill Steel Sup Part No.-3128078390 , Spacer Part No.-3128078406 , Spacer Part No.-3128078407 , Spacer Part No.-3128078408 , Spacer Part No.-3128078409 , Profile Part No.-3128078418 , Drill Steel Sup Part No.-3128078426 , Roll.Bearing Part No.-3128078427 , Spring Part No.-3128078434 , Cradle Plate Part No.-3128078437 , Hållare Part No.-3128078438 , Hållare Part No.-3128078439 , Cradle Part No.-3128078444 , Cradle Plate Part No.-3128078445 , End Piece Part No.-3128078447 , Back Head Part No.-3128078448 , Clamp Part No.-3128078459 , End Plate Part No.-3128078460 , Drill Supp. Part No.-3128078467 , Cyl.Attachm. Part No.-3128078484 , Stop Plate Part No.-3128078496 , Pulley Wheel Part No.-3128078534 , Sleeve Part No.-3128078535 , Bricka Part No.-3128078536 , Gable Plate Part No.-3128078542 , Attachment Part No.-3128078545 , Attach.Plate Part No.-3128078546 , Pipe Part No.-3128078551 , Lower Part Part No.-3128078552 , Top Part Part No.-3128078553 , Bracket Part No.-3128078569 , Spacer Part No.-3128078570 , Sleeve Part No.-3128078571 , Holder Part No.-3128078576 , Holder Part No.-3128078610 , Holder Part No.-3128078611 , Shim Part No.-3128078613 , Cradle Plate Part No.-3128078614 , Spacer Part No.-3128078615 , Protection Part No.-3128078629 , Plunger Part No.-3128082700 , Check Part No.-3222328551 , Hose Fender Part No.-3128087800 , Cradle Plate Part No.-3128089400 , Nipple Part No.-3128093400 , Hållare Part No.-3128094030 , Assembly Set Part No.-3128094032 , Holder Part No.-3128094037 , Shim Part No.-3128094038 , Assembly Set Part No.-3128094039 , Gable Plate Part No.-3128094050 , Gable Plate Part No.-3128094070 , Yoke Part No.-3128096800 , Attachment Part No.-3128096900 , Hose Holder Part No.-3128096980 , Protection Part No.-3128098100 , Stop Set Part No.-3128102026 , Stop Part No.-3128102027 , Spring Part No.-3128200100 , Sealing Set Part No.-3128200490 , Fork Part No.-3128200800 , Link Part No.-3128200900 , Shaft Part No.-3128201100 , End Plate Part No.-3128201200 , End Plate Part No.-3128201202 , End Plate Part No.-3128201203 , End Plate Part No.-3128201204 , Direct.Valve Part No.-3128201948 , Guide Plate Part No.-3128201949 , Slangnippel Part No.-3128201954 , Pr.Red.Valve Part No.-3128201985 , Press.Red.Va Part No.-3128202015 , Press.Red.Va Part No.-3128202018 , Regulator Part No.-3128202064 , Bushing Half Part No.-3128202101 , Bushing Half Part No.-3128202102 , Bushing Half Part No.-3128202103 , Bushing Half Part No.-3128202104 , Bushing Half Part No.-3128202105 , Bushing Half Part No.-3128202106 , Bushing Half Part No.-3128202107 , Bushing Half Part No.-3128202108 , Dr.St.Supp.H Part No.-3128202116 , Bushing Half Part No.-3128202118 , Bushing Half Part No.-3128202120 , Bushing Half Part No.-3128202122 , Bushing Half Part No.-3128202124 , Bushing Half Part No.-3128202129 , Bushing Half Part No.-3128202130 , Damper Part No.-3128206400 , Monteringssa Part No.-3128206729 , Strainer Part No.-3128208500 , Nozzle Part No.-3128208600 , Spray Nozzle Part No.-3128208800 , Dir. Valve Part No.-3128209004 , Cartridge Part No.-3128209011 , Valve Block Part No.-3128209013 , Dir.Valve Part No.-3128209020 , Piston Part No.-3128209034 , Press.Transd Part No.-3128209037 , Seal Kit Part No.-3128209042 , Direction Va Part No.-3128209050 , Direction Va Part No.-3128209051 , Pr.Contr.Val Part No.-3128209052 , Direction Va Part No.-3128209053 , Direction Va Part No.-3128209054 , Direction Va Part No.-3128209057 , Boom Hyd Kit Part No.-3128209059 , Direction Va Part No.-3128209061 , Pr.Contr.Valve Part No.-3128209062 , Rubber Hood Part No.-3128209068 , Direction Va Part No.-3128209069 , Direction Va Part No.-3128209070 , Direction Va Part No.-3128209072 , Direction Va Part No.-3128209073 , Direction Va Part No.-3128209074 , Plug Part No.-3128209076 , Direction Va Part No.-3128209077 , Direction Va Part No.-3128209079 , Direction Va Part No.-3128209091 , Assembly Set Part No.-3128209093 , Bushing Seg. Part No.-3128209100 , Inlet Section Part No.-3128209101 , Check Valve Part No.-3128209105 , Cap Kit Part No.-3128209106 , Cap Part No.-3128209107 , Pull Rod Set Part No.-3128209109 , Press.Rel.Va Part No.-3128209125 , Pull Rod Set Part No.-3128209126 , End Piece Set Part No.-3128209128 , Spring Part No.-3128209129 , Spool Valve Part No.-3128209138 , Seal Kit Part No.-3128209144 , Bearing Kit Part No.-3128209145 , Protect.Bellows Part No.-3128209149 , Kit Part No.-3128209162 , Kit Part No.-3128209163 , Spring Set Part No.-3128209168 , Lever Part No.-3128209169 , Spring Part No.-3128209184 , Cover Part No.-3128209201 , Scraper Part No.-3128209301 , Seal Part No.-3128209302 , Washer Part No.-3128209401 , Hylsa Part No.-3128209700 , Attachm. Plate Part No.-3128209800 , Attachm. Pla Part No.-3128209801 , Anti-Inducti Part No.-3128209922 , Flow Reg. Part No.-3128209933 , Backventil Part No.-3128209955 , Seal Kit Part No.-3128209965 , Hyd.Cylinder Part No.-3128209972 , Check Valve Part No.-3128209998 , Valve Block Part No.-3128209999 , Relief Valve Part No.-3128210034 , Exp.Shaft Part No.-3128211480 , Drill Supp. Part No.-3128212200 , Gasket Set Part No.-3128212490 , Bushing Part No.-3128215200 , Spacer Part No.-3128216100 , Cover Part No.-3128216500 , Seal Part No.-3128216600 , Bushing Seg. Part No.-3128216900 , Cylind.Bracket Part No.-3128217202 , Cylind.Bracket Part No.-3128217203 , Cover Part No.-3128217400 , Seal Kit Part No.-3128219148 , Bearing Part No.-0501000061 , Spacer Part No.-3128219200 , Piston Rod Part No.-3128220600 , Holder Part No.-3128222740 , Bushing Half Part No.-3128224104 , Bushing Half Part No.-3128224107 , Bushing Half Part No.-3128224108 , Piston Part No.-3128225001 , Spring Part No.-3128225100 , Cover Part No.-3128226200 , Lock Washer Part No.-3128227301 , Flödesregulator Part No.-3128228101 , Shelf Part No.-3128228702 , Shelf Part No.-3128228703 , Cradle Part No.-3128228713 , End Piece Part No.-3128228729 , Stop Part No.-3128228730 , Shim Part No.-3128228731 , Slid.Piece Part No.-3128228755 , Sliding Piece Part No.-3128228757 , Sliding Piece Part No.-3128228758 , Bushing Part No.-3128228763 , Guide Spindle Part No.-3128228774 , Piston Rod Part No.-3128228792 , Cover Part No.-3128228800 , Drill Supp. Part No.-3128230102 , Liner Part No.-3128231241 , Shaft Part No.-3128231289 , Hyd.Cylinder Part No.-3128231290 , Damping Elem Part No.-3128235300 , Spacer Part No.-3128237600 , Spacer Part No.-3128237617 , Repair Kit Part No.-3128239324 , Bushing Part No.-3128240000 , Jaw Part No.-3128240300 , Shaft Part No.-3128240400 , Shaft Part No.-3128240500 , Bushing Half Part No.-3128240701 , Screw Part No.-3128241500 , Hose Fender Part No.-3128241701 , Shaft Part No.-3128242700 , Attachment Part No.-3128242712 , Attachment Part No.-3128242714 , Gasket Part No.-3128242800 , Arm Part No.-3128243002 , Holder Set Part No.-3128243358 , Attachment Part No.-3128243400 , Gasket Part No.-3128243500 , Supp.Plate Part No.-3128245800 , Holder Part No.-3128245900 , Washer Part No.-3128247393 , Protection Part No.-3128250806 , Protection Part No.-3128252259 , Roller Chain Part No.-3128252589 , Protect.Coil Part No.-3128252625 , Shaft Part No.-3128253358 , Pump Element Part No.-3128253801 , Relief Valve Part No.-3128253802 , Valve Block Part No.-3128253803 , Extender Part No.-3128253806 , Bushing Part No.-3128253807 , Threaded Sleeve Part No.-3128253808 , Hose Adapter Part No.-3128253809 , High Power Pipe Part No.-3128253810 , Valve Part No.-3128253816 , Valve House Part No.-3128253817 , Valve House Part No.-3128253818 , Lubr.Valve Part No.-3128253820 , Lubric.Pump Part No.-3128253836 , Valve Housin Part No.-3128253837 , Valve House Part No.-3128253887 , Valve House Part No.-3128253888 , Lub Valve Part No.-3128253980 , Check Valve Part No.-3128253995 , Nipple Block Part No.-3128254114 , Support Part No.-3128255021 , Sleeve Part No.-3128255076 , Hydr.Motor Part No.-3128255305 , Sealing Set Part No.-3128255310 , Clamp Part No.-3128255903 , Back Head Part No.-3128256139 , Spacer Part No.-3128256158 , Shaft Part No.-3128256165 , Bushing Part No.-3128256166 , Pulley Wheel Part No.-3128256167 , Pulley Wheel Part No.-3128256169 , Spacer Part No.-3128256198 , Cradle Part No.-3128256199 , Sensor Flag Part No.-3128256848 , Bushing Part No.-3128257000 , Bushing Part No.-3128257001 , Bearing Bush Part No.-3128257003 , Yoke Part No.-3128257511 , Holder Part No.-3128257567 , Holder Part No.-3128257578 , Protection Part No.-3128257780 , Roller Part No.-3128257841 , Guide Part No.-3128257938 , Guide List Part No.-3128258215 , Attachment Part No.-3128258235 , Rubb.Protec. Part No.-3128258238 , Flat Bar Part No.-3128258239 , Flat Bar Part No.-3128258240 , Support Part No.-3128258261 , Clamp Part No.-3128258293 , Hyd.Cylinder Part No.-3128259200 , Piston Part No.-3128259216 , Washer Part No.-3128259217 , Seal Kit Part No.-3128259218 , Seal Kit Part No.-3128259219 , Hyd.Cylinder Part No.-3128259241 , Hyd.Cylinder Part No.-3128259242 , Hyd.Cylinder Part No.-3128259243 , Sealing Set Part No.-3128259244 , Sealing Set Part No.-3128259248 , Bricka Part No.-3128259249 , Sealing Set Part No.-3128259250 , Seal Kit Part No.-3128259254 , Kolv Part No.-3128259255 , Seal Kit Part No.-3128259258 , Bricka Part No.-3128259259 , Kolv Part No.-3128259261 , Seal Kit Part No.-3128259296 , Cylinder Part No.-3128259401 , Hyd.Cylinder Part No.-3128259402 , Hydr. Cylinder Part No.-3128259403 , Cylinder Part No.-3128259404 , Hyd.Cyl Part No.-3128259406 , Piston Rod Part No.-3128259407 , Seal Kit Part No.-3128259426 , Attachment Part No.-3128259750 , Hyd. Cylinde Part No.-3128259843 , Piston Part No.-3128259845 , Seal Kit Part No.-3128259846 , Hydr. Cylind Part No.-3128259848 , Thru.Bearing Part No.-3128280000 , Cylinder Lin Part No.-3128280003 , Thru.Bearing Part No.-3128280004 , Boom Link Part No.-3128280005 , Länk Part No.-3128280007 , Axiallager Part No.-3128280008 , Axiallager Part No.-3128280009 , Axiallager Part No.-3128280010 , Bomfäste Part No.-3128280027 , Bomfäste Part No.-3128280031 , Bomlänk Part No.-3128280036 , Boom Link Part No.-3128280043 , Cylinder Set Part No.-3128280128 , Cylinder Set Part No.-3128280182 , Cylinder Set Part No.-3128280183 , Ext.Cylinder Part No.-3128280770 , Telescope Set Part No.-3128280771 , Piston Rod Part No.-3128280778 , Cylind.Bracket Part No.-3128280780 , Trust Washer Part No.-3128280815 , Bushing Part No.-3128280816 , Trust Washer Part No.-3128280822 , Expanding Sh Part No.-3128280825 , Shaft Part No.-3128280865 , Hydr. Cylind Part No.-3128280881 , Brg. Hsg. As Part No.-3128280882 , Expanding Sh Part No.-3128280885 , Bushing Part No.-3128280886 , Bearing Plat Part No.-3128280890 , Seal Part No.-3128280893 , Setting Scre Part No.-3128280894 , Sensor Brack Part No.-3128280899 , Seal Holder Part No.-3128280900 , Bearing Plat Part No.-3128280902 , Cover Washer Part No.-3128280903 , Matarhallare Part No.-3128280913 , Hyd. Cylinde Part No.-3128280914 , Hyd. Cylinde Part No.-3128280915 , Expanding Sh Part No.-3128280924 , Expanding Sh Part No.-3128280947 , Belt Tension Part No.-3128280959 , Slide Suppor Part No.-3128280961 , Slide Suppor Part No.-3128280964 , Sliding Plan Part No.-3128280973 , Band Part No.-3128280975 , Stop Part No.-3128280978 , Gear Case Co Part No.-3128281045 , Pressure Scr Part No.-3128281049 , Sliding Bloc Part No.-3128281069 , Wire Attachm Part No.-3128281087 , Attachm.Comp Part No.-3128281100 , Attachm.Comp Part No.-3128281101 , Hyd. Cylinde Part No.-3128281102 , Hyd. Cylinde Part No.-3128281104 , Cylinder Bra Part No.-3128281121 , Cylinder Bra Part No.-3128281187 , Cover Part No.-3128290019 , Cover Part No.-3128290020 , Cover Part No.-3128290021 , Cover Part No.-3128290022 , Cover Part No.-3128290023 , Cover Part No.-3128290028 , Clamp Iron Part No.-3128290035 , Bearing Part No.-3128300021 , Roll.Bearing Part No.-3128300102 , Holder Part No.-3128300107 , Shaft Part No.-3128300108 , Roller Part No.-3128300112 , Spac. Sleeve Part No.-3128300155 , Clamp Part No.-3128300162 , Bearing Hous Part No.-3128300174 , Roller Part No.-3128300203 , Shaft Part No.-3128300216 , Cover Part No.-3128300217 , Spacer Ring Part No.-3128300220 , Spacer Ring Part No.-3128300221 , Back-Up Ring Part No.-3128300230 , Pist.Rod End Part No.-3128300268 , Pist.Rod End Part No.-3128300269 , Attachment Part No.-3128300270 , Plug Part No.-3128300407 , Sliding Bar Part No.-3128300481 , Tensioner Part No.-3128300525 , Plug Part No.-3128300537 , Cutting Ring Part No.-3128300538 , Connecting Link Part No.-3128300553 , Detail Set Part No.-3128300733 , Seal Set Part No.-3128300734 , Roller Part No.-3128300756 , Motor Casing Part No.-3128300811 , Protection Part No.-3128300975 , Stop Part No.-3128301043 , Pinch Bar H. Part No.-3128301078 , Pinch Bar H. Part No.-3128301079 , Attachment Part No.-3128301095 , Holder Part No.-3128301176 , Cover Plate Part No.-3128301190 , Key Part No.-3128301232 , Sleeve Part No.-3128301233 , Cover Part No.-3128301235 , Bearing Hous Part No.-3128301236 , Cover Part No.-3128301237 , Cover Part No.-3128301238 , Seal Part No.-3128301239 , Cover Part No.-3128301240 , End Plate Part No.-3128301273 , Bear.Housing Part No.-3128301290 , Protect.Arch Part No.-3128301360 , Protection Part No.-3128301366 , Pist.Rod End Part No.-3128301389 , Check Part No.-3128301390 , Check Part No.-3128301391 , Shaft Part No.-3128301457 , Chain Bracket Part No.-3128301460 , Attachment Part No.-3128301559 , Cover Plate Part No.-3128301617 , Attachment Part No.-3128301724 , Yoke Part No.-3128301725 , Hook Part No.-3128301894 , Shaft Part No.-3128301895 , Shaft Part No.-3128301896 , Pull Rod Set Part No.-3128301996 , Pin Part No.-3128302000 , Clamp Part No.-3128302006 , Gummiduk Part No.-3128302054 , Attachment Part No.-3128302055 , Flat Bar Part No.-3128302056 , Clamp Part No.-3128302094 , Check Part No.-3128302217 , Pin Part No.-3128302232 , Check Part No.-3128302270 , O-Ring Part No.-3128302310 , Check Part No.-3128302351 , Insats Part No.-3128302371 , Seal Kit Part No.-3128302372 , Stop R.Half Part No.-3128302389 , Check Part No.-3128302392 , Drill St.Sup Part No.-3128302411 , Ext. Set Part No.-3128302413 , Wrench Part No.-3128302415 , Check Valve Part No.-3128302428 , Repair Kit Part No.-3128302506 , Sealing Set Part No.-3128302508 , Bushing Part No.-3128302547 , Bushing Part No.-3128302549 , Bushing Part No.-3128302550 , Bushing Part No.-3128302551 , Bushing Part No.-3128302552 , Bushing Part No.-3128302555 , Bushing Part No.-3128302556 , Bushing Part No.-3128302557 , Bushing Part No.-3128302558 , Bushing Part No.-3128302559 , Bushing Part No.-3128302560 , Bushing Part No.-3128302561 , Bushing Part No.-3128302562 , Shaft Set Part No.-3128302588 , Check Part No.-3128302697 , Spacer Part No.-3128302760 , Plug Part No.-3128302788 , Bushing Part No.-3128302953 , Bushing Part No.-3128302954 , Exp.Shaft Part No.-3128302956 , Stop Part No.-3128303022 , Dr.St.Supp.Half Part No.-3128303131 , Bushing Part No.-3128303164 , Pinch B.Hous Part No.-3128303328 , Bearing Ring Part No.-3128303335 , Bearing Ring Part No.-3128303336 , Slide Washer Part No.-3128303338 , Bushing Part No.-3128303434 , Cover Part No.-3128303469 , Attachment Part No.-3128303558 , Stöd Part No.-3128303569 , Protection Part No.-3128303570 , Protection Part No.-3128303571 , Clamp Part No.-3128303590 , Seal Part No.-3128303651 , Dowel Part No.-3128303703 , Check Part No.-3128303885 , Bushing Part No.-3128303896 , Bushing Part No.-3128303897 , Interm.Plate Part No.-3128303921 , Guide Sleeve Part No.-3128304024 , Dir.Valve Part No.-3128304271 , Seal Part No.-3128304301 , O-Ring Part No.-3128304311 , Slid.Piece Part No.-3128304355 , Exp. Shalft Part No.-3128304412 , Pinchbar Hou Part No.-3128304443 , Holder Part No.-3128304519 , Cap Part No.-3128304550 , Check Part No.-3128304574 , Stop Ring Ha Part No.-3128304695 , Cutt.Guide Part No.-3128304781 , Check Part No.-3128304911 , Reservoir Part No.-3128304942 , Plug Part No.-3128304943 , Cradle Part No.-3128305147 , End Piece Part No.-3128305171 , Pipe Part No.-3128305175 , Back Head Part No.-3128305184 , Driver Part No.-3128305225 , Repair Kit Part No.-3128305422 , Bracket Part No.-3128305464 , Check Part No.-3128305496 , Clamp Part No.-3128305561 , Clamp Part No.-3128305562 , Clamp Part No.-3128305575 , Jaw Part No.-3128305577 , Interm.Supp. Part No.-3128305622 , Interm.Supp. Part No.-3128305623 , Gummiduk Part No.-3128305626 , Clamp Part No.-3128305729 , Clamp Part No.-3128305796 , Distanshylsa Part No.-3128305915 , Interm.Supp. Part No.-3128305929 , Interm.Supp. Part No.-3128305930 , Cradle Part No.-3128305977 , Bellow Coupl Part No.-3128305989 , Interm.Dr.Su Part No.-3128305993 , Hyd.Cylinder Part No.-3128306000 , Hyd.Cylinder Part No.-3128306004 , Hyd.Cylinder Part No.-3128306006 , Hyd.Cylinder Part No.-3128306015 , Hyd.Cylinder Part No.-3128306016 , Hyd.Cylinder Part No.-3128306019 , Hyd. Cylinde Part No.-3128306020 , Hyd.Cylinder Part No.-3128306021 , Hyd.Cylinder Part No.-3128306024 , Hyd.Cylinder Part No.-3128306028 , Hyd.Cylinder Part No.-3128306030 , Hydr. Cylind Part No.-3128306042 , Hyd.Cylinder Part No.-3128306043 , Attach. Lug Part No.-3128306102 , Key Part No.-3128306124 , Wiper Part No.-3128306147 , Holder Set Part No.-3128306163 , Holder Set Part No.-3128306164 , Borrmaskinsats Part No.-3128306175 , Hållare Part No.-3128306180 , Hållare Part No.-3128306181 , Gränsläg.Ventil Part No.-3128306183 , Seal Plug Part No.-3128306186 , Shim Set Part No.-3128306233 , Connector Part No.-3128306245 , Seal Part No.-3128306247 , Seal Part No.-3128306248 , Seal Part No.-3128306249 , Hose Holder Part No.-3128306256 , Yoke Part No.-3128306257 , Attachment Part No.-3128306261 , Clamp Part No.-3128306318 , Check Valve Part No.-3128306359 , Exp. Shaft Part No.-3128306383 , Cover Part No.-3128306425 , Shim Part No.-3128306426 , Hub Part No.-3128306489 , Attach.Plate Part No.-3128306542 , Sensor Prot. Part No.-3128306545 , Attachment Part No.-3128306556 , Attach.Plate Part No.-3128306585 , Coupling Part No.-3128306610 , Plate Part No.-3128306622 , Plate Part No.-3128306623 , Plate Part No.-3128306624 , Bushing Part No.-3128306765 , Lock Sheet Part No.-3128306822 , Shaft Part No.-3128306949 , Shaft Part No.-3128306950 , Axel Part No.-3128306951 , Bolt Part No.-3128306953 , Bolt Part No.-3128306954 , Bolt Part No.-3128306955 , Sensor Set Part No.-3128307011 , Sensor Set Part No.-3128307012 , Sensor Set Part No.-3128307013 , Sensor Set Part No.-3128307015 , Linear Senso Part No.-3128307018 , Cover Part No.-3128307020 , Wire Part No.-3128307030 , Boom Body Part No.-3128307033 , Holder Part No.-3128307040 , Gasket Part No.-3128307045 , Cover Part No.-3128307050 , Cable Tray Part No.-3128307069 , Attachment Part No.-3128307127 , Dr.Steel Sup Part No.-3128307184 , Cradle Plate Part No.-3128307192 , Tool Retaine Part No.-3128307240 , Hose Attachment Part No.-3128307304 , Segment Part No.-3128307466 , Segment Part No.-3128307468 , Protect.Coil Part No.-3128307483 , Segment Part No.-3128307494 , Segment Part No.-3128307495 , Segment Part No.-3128307496 , Cradle Plate Part No.-3128307653 , Valve Part No.-3128307664 , Valve Part No.-3128307666 , Seal Kit Part No.-3128307667 , Valve Part No.-3128307668 , Aim Plate Part No.-3128307693 , Aim Plate Part No.-3128307694 , Calibr. Set Part No.-3128307695 , Sight Part No.-3128307696 , Sight Part No.-3128307697 , Inclinometer Part No.-3128307712 , Hose Holder Part No.-3128307718 , Hose Holder Part No.-3128307719 , Sensor Prote Part No.-3128307721 , Sensor Prote Part No.-3128307724 , Parts Kit Part No.-3128307737 , Renoveringssats Part No.-3128307754 , Seal Kit Part No.-3128307760 , Plate Part No.-3128307772 , Plate Part No.-3128307773 , Attachment Part No.-3128307777 , Renoveringssats Part No.-3128307778 , Attachment Part No.-3128307788 , Plate Part No.-3128307789 , Red. Valve Part No.-3128307798 , Sensor Prot. Part No.-3128307816 , Holder Part No.-3128307858 , Sensor Set Part No.-3128307863 , Pulley Wheel Part No.-3128307888 , Linear Senso Part No.-9106152440 , Boom Support Part No.-3128307935 , Cover Part No.-3128307939 , Lock Nut Part No.-3128307946 , Attachment Part No.-3128307947 , Extension Tu Part No.-3128307972 , Guide Tube Part No.-3128307975 , Turning Devi Part No.-3128307978 , Bulkhead Conn. Part No.-3128307982 , Bulkhead Conn. Part No.-3128307983 , Inclinometer Part No.-3128307991 , Exp.Shaft Co Part No.-3128308004 , Key Part No.-3128308017 , Cover Part No.-3128308018 , Shaft Part No.-3128308035 , Bomfäste Part No.-3128308042 , Bom Part No.-3128308043 , Attachment Part No.-3128308047 , Attachment Part No.-3128308054 , Wire Attachm Part No.-3128308067 , Wire Attachm Part No.-3128308068 , Cover Part No.-3128308092 , Sensor Prote Part No.-3128308106 , Attachm.Plat Part No.-3128308114 , Bushing Part No.-3128308121 , Bushing Part No.-3128308122 , Hyd.Cylinder Part No.-3128308129 , Bushing Part No.-3128308130 , Space Sleeve Part No.-3128308131 , Shaft Part No.-3128308135 , Hyd.Cylinder Part No.-3128308143 , Shaft Part No.-3128308149 , Link Part No.-3128308150 , Boom Link Part No.-3128308152 , Screw Part No.-3128308154 , Cover Part No.-3128308190 , Bushing Part No.-3128308251 , Sensor Set Part No.-3128308274 , Sensor Set Part No.-3128308275 , Protection Part No.-3128308277 , Axel Part No.-3128308303 , Cover Part No.-3128308306 , Sensor Prote Part No.-3128308338 , Nipple Part No.-3128308346 , Hyd. Pipe Part No.-3128308347 , Attachment Part No.-3128308383 , Holder Part No.-3128308386 , Holder Part No.-3128308387 , Assembly Set Part No.-3128308388 , Overc.Valve Part No.-3128308391 , Holder Part No.-3128308641 , Exc.Washer Part No.-3128308717 , Attachment Part No.-3128308720 , Seal Kit Part No.-3128308726 , Valve Part No.-3128308727 , Coil Part No.-3128308729 , Seal Kit Part No.-3128308730 , Seal Kit Part No.-3128308731 , Seal Part No.-3128308819 , Washer Part No.-3128309040 , Roller Path Part No.-3128309042 , Guide Strip Part No.-3128309048 , Guide Strip Part No.-3128309049 , Catch Part No.-3128309061 , Stop Lug Part No.-3128309062 , Bracket Part No.-3128309077 , Potentiomete Part No.-3128309090 , Spring Part No.-3128309091 , Shaft Part No.-3128309115 , Shaft Lock Part No.-3128309116 , Bearing Part No.-3128309117 , Bracket Part No.-3128309122 , Arm Part No.-3128309127 , Arm Part No.-3128309137 , Tube Part No.-3128309142 , Shaft Part No.-3128309152 , Turning Devi Part No.-3128309172 , Plate Part No.-3128309173 , Arm Part No.-3128309175 , Bracket Part No.-3128309177 , Clamp Part No.-3128309183 , Attachment Part No.-3128309200 , Attachment Part No.-3128309204 , Shaft Part No.-3128309206 , Bracket Comp Part No.-3128309208 , Holder Part No.-3128309213 , Prot.Arch Part No.-3128309216 , Bearing Part No.-3128309217 , Disk Part No.-3128309219 , Tube Driver Part No.-3128309222 , Protection A Part No.-3128309225 , Holder Part No.-3128309228 , Dividing Disk Part No.-3128309232 , Holder Part No.-3128309233 , Protect. Frame Part No.-3128309238 , Tube Driver Part No.-3128309245 , Seal Kit Part No.-3128309251 , Hose Holder Part No.-3128309255 , Stopper Part No.-3128309261 , Bushing Part No.-3128309270 , Bushing Part No.-3128309271 , Bushing Part No.-3128309272 , Bushing Part No.-3128309273 , Roller Disc Part No.-3128309276 , Stopper Part No.-3128309279 , Turning Devi Part No.-3128309281 , Key Part No.-3128309291 , Attachment Part No.-3128309302 , Hyd.Cyl Part No.-3128309310 , Wire Attachm Part No.-3128309330 , Bearing Set Part No.-3128309345 , Bushing Part No.-3128309361 , Shim Part No.-3128309369 , Gear Part No.-3128309376 , Brake Part No.-3128309377 , Hyd.Motor Part No.-3128309378 , Gear Complet Part No.-3128309381 , Exp.Shaft Part No.-3128309396 , Attachment Part No.-3128309406 , Magazine Part No.-3128309408 , Drill Holder Part No.-3128309410 , Stop Part No.-3128309411 , Hub Part No.-3128309412 , Disc Part No.-3128309415 , Stay Part No.-3128309416 , Sliding List Part No.-3128309418 , Arm Part No.-3128309431 , Jaw Part No.-3128309433 , Shaft Part No.-3128309436 , Shaft Part No.-3128309437 , Shaft Part No.-3128309438 , Protection Part No.-3128309440 , Fitting Bolt Part No.-3128309441 , Attachment Part No.-3128309443 , Bearing Part No.-3128309456 , Bearing Part No.-3128309457 , Valve Block Part No.-3128309511 , Attachment Part No.-3128309524 , Cradle Part No.-3128309562 , Stop Lug Part No.-3128309582 , Washer Part No.-3128309732 , Arm Part No.-3128309734 , Clamp Part No.-3128309736 , Shim Part No.-3128309740 , Seal Kit Part No.-3128309756 , Operators To Part No.-3128309760 , End Plate Part No.-3128309788 , Sleeve Part No.-3128309791 , Interm. Plat Part No.-3128309793 , Sensor Brack Part No.-3128309799 , Clamp Part No.-3128309812 , Attachment Part No.-3128309813 , Attachment Part No.-3128309820 , Holder Part No.-3128309822 , Bearing Unit Part No.-3128309842 , Pin Part No.-3128309850 , Guide Part No.-3128309852 , Guide Part No.-3128309858 , Water Level Part No.-6060013895 , Pinion Part No.-3128309879 , Protection Part No.-3128309929 , Stud Part No.-3128309931 , Stud Part No.-3128309932 , Plate Part No.-3128309933 , Shaft Compl. Part No.-3128309970 , Sensor Flag Part No.-3128309971 , Sensor Set Part No.-3128310075 , Interm.Supp. Part No.-3128310106 , Attachment Part No.-3128310107 , Arm Part No.-3128310108 , Arm Part No.-3128310109 , Shaft Part No.-3128310111 , Shaft Part No.-3128310112 , Shaft Part No.-3128310113 , Carriage Part No.-3128310115 , Pr.Gauge Set Part No.-3128310123 , End Piece Part No.-3128310200 , Arm Part No.-3128310206 , Cover Part No.-3128310208 , Spacer Part No.-3128310212 , Spacer Part No.-3128310213 , Cover Part No.-3128310214 , Cover Part No.-3128310215 , Cover Part No.-3128310216 , Cover Part No.-3128310217 , Wear Plate Part No.-3128310249 , Shaft Part No.-3128310267 , Gable Plate Part No.-3128310271 , Gable Plate Part No.-3128310272 , Gable Plate Part No.-3128310273 , Gable Plate Part No.-3128310274 , Shaft Part No.-3128310275 , Rot.Ch.Bushi Part No.-3128310276 , Stay Part No.-3128310283 , Stay Part No.-3128310292 , Prot.Arch Part No.-3128310293 , Protechtion Part No.-3128310294 , Plunge Part No.-3128310350 , House Part No.-3128310351 , Piston Rod Part No.-3128310352 , Plunger Part No.-3128310353 , Steel Angle Part No.-3128310357 , Attachment Part No.-3128310364 , Guide Spind. Part No.-3128310372 , Guide Spind. Part No.-3128310373 , Jaw Part No.-3128310378 , Shaft Part No.-3128310390 , Shaft Part No.-3128310391 , Bearing Hous Part No.-3128310392 , Bearing Hous Part No.-3128310393 , Cover Part No.-3128310394 , Arm Part No.-3128310398 , Spacer Part No.-3128310400 , Link Part No.-3128310401 , Piston Rod Part No.-3128310402 , Fork Part No.-3128310406 , Bush.Half Part No.-3128310420 , Bush.Half Part No.-3128310421 , Bushing Half Part No.-3128310422 , Bush.Half Part No.-3128310423 , Bushing Half Part No.-3128310425 , Bush.Half Part No.-3128310426 , Bushing Half Part No.-3128310427 , Sensor Set Part No.-3128310428 , Bushing Part No.-3128310453 , Exp.Shaft Part No.-3128310472 , Cradle Part No.-3128310511 , Spacer Part No.-3128310512 , Spacer Part No.-3128310513 , Magnet Part No.-3128310518 , Spacer Part No.-3128310520 , Spacer Part No.-3128310522 , Collect.Bloc Part No.-3128310575 , Shaft Part No.-3128310596 , Exp.Shaft Part No.-3128310598 , Bushing Part No.-3128310601 , Cylinder Part No.-3128310612 , Bushing Part No.-3128310613 , Bearing Unit Part No.-3128310635 , Attachm. Pla Part No.-3128310678 , Holder Part No.-3128310679 , Pin Part No.-3128310702 , Bushing Part No.-3128310730 , Protection Part No.-3128310732 , Guard Part No.-3128310733 , Plate Part No.-3128310734 , Guard Part No.-3128310735 , Guard Part No.-3128310736 , Flat Bar Part No.-3128310737 , Holder Part No.-3128310747 , Cradle Plate Part No.-3128310841 , Bolt Cradle Part No.-3128310848 , Bulkhead Conn. Part No.-3128310852 , Bulkhead Conn. Part No.-3128310854 , Bulkhead Conn. Part No.-3128310856 , Bulkhead Conn. Part No.-3128310858 , Feeding Dev. Part No.-3128310878 , Attachment Part No.-3128310879 , Pipe Guide Part No.-3128310881 , Hyd.Cylinder Part No.-3128310883 , Nozzle Part No.-3128310884 , Cradle Part No.-3128310890 , Hose Guide Part No.-3128310891 , Clamp Part No.-3128310946 , Guard Part No.-3128310963 , Guard Part No.-3128310973 , Hose Guide Set Part No.-3128310983 , Hose Frame Part No.-3128311007 , Hose Frame Part No.-3128311009 , Seal Part No.-3128311013 , Steel Cable Part No.-3128311042 , Steel Cable Part No.-3128311043 , Steel Cable Part No.-3128311044 , Steel Cable Part No.-3128311045 , Steel Cable Part No.-3128311046 , Steel Cable Part No.-3128311047 , Clamp Part No.-3128311058 , Plate Part No.-3128311243 , Hyd.Cylinder Part No.-3128311254 , Washer Part No.-3128311278 , Drill Steel Part No.-3128311311 , Cylind.Brack Part No.-3128311349 , Hose Holder Part No.-3128311382 , Cover Part No.-3128311393 , Shaft Part No.-3128311394 , Direction Va Part No.-3128311451 , Press.Rel.Va Part No.-3128311469 , Exp.Shaft Co Part No.-3128311511 , Protection Part No.-3128311543 , Bushing Part No.-3128311574 , Expanding Sh Part No.-3128311575 , Shim Part No.-3128311578 , Shim Part No.-3128311579 , Attachment Part No.-3128311587 , Axel Part No.-3128311588 , Hydraulic Cy Part No.-3128311605 , Cover Part No.-3128311640 , Lock Ring Part No.-3128311641 , Protection R Part No.-3128311673 , Slid.Piece Part No.-3128311674 , Protection Part No.-3128311698 , Bushing Part No.-3128311701 , Protection Part No.-3128311714 , Attachment S Part No.-3128311723 , Protection R Part No.-3128311794 , Protection Part No.-3128311795 , Pulley Wheel Part No.-3128311802 , Cover Part No.-3128311804 , Attachment Part No.-3128311805 , Washer Part No.-3128311807 , Plate Part No.-3128311832 , Guide Strip Part No.-3128311833 , Attachment Part No.-3128311847 , Yoke Part No.-3128311879 , Drive Unit Part No.-3128311880 , Shaft Part No.-3128311881 , Stop Part No.-3128311882 , Shaft Coupli Part No.-3128311883 , Torque Arm Part No.-3128311884 , Protection Part No.-3128311966 , Seal Set Part No.-3128311987 , Repair Set Part No.-3128311988 , Hard Ware Ki Part No.-3128311989 , Motor Suppor Part No.-3128312002 , Attachment Part No.-3128312017 , Linear Senso Part No.-3128312019 , Shaft Part No.-3128312020 , Hydraulcylin Part No.-3128312230 , Hydraulcylin Part No.-3128312231 , Jaw Part No.-3128312274 , Bushing Half Part No.-3128312276 , Bushing Half Part No.-3128312277 , Attachment N Part No.-3128312286 , Spacer Part No.-3128312290 , Segment D89 Part No.-3128312295 , Holder Compl Part No.-3128312307 , Holder Compl Part No.-3128312308 , Cradle Part No.-3128312497 , Seal Kit Part No.-3128312533 , Piston Rod Part No.-3128312534 , Nozzle Part No.-3128312540 , Seal Kit Part No.-3128312566 , Bearing Set Part No.-3128312567 , Assemb. Deta Part No.-3128312568 , End Cap Part No.-3128312569 , Overcent.Valve Part No.-3128312570 , Seal Kit Part No.-3128312571 , Bearing Set Part No.-3128312572 , End Cap Part No.-3128312573 , Key Part No.-3128312577 , Extension Tu Part No.-3128312579 , Seal Kit Part No.-3128312582 , Bearing Set Part No.-3128312583 , Assemb.Det. Part No.-3128312584 , End Cap Part No.-3128312588 , Turning Devi Part No.-3128312607 , Kolvstång Part No.-3128312617 , Check Part No.-3128312635 , Protection Part No.-3128312639 , Turning Devi Part No.-3128312643 , Turning Device Part No.-3128312644 , Hyd.Cylinder Part No.-3128312650 , Stop Part No.-3128312680 , Chain Part No.-3128312686 , End Cap Part No.-3128312688 , Cover Part No.-3128312689 , Tube Kit Part No.-3128312690 , Kit Part No.-3128312707 , House Part No.-3128312708 , Shaft Part No.-3128312709 , Piston Part No.-3128312710 , Lock Nut Part No.-3128312711 , Valve Part No.-3128312712 , Tube Part No.-3128312713 , Shim Part No.-3128313311 , Bracket Part No.-3128313318 , Nozzle Set Part No.-3128313334 , Bushing Part No.-3128313352 , Protection Part No.-3128313358 , Sensor Part No.-3128313384 , Linear Senso Part No.-3128313385 , Square Bar Part No.-3128313393 , Stinger Part No.-3128313397 , Inner Tube Part No.-3128313398 , Hydr. Cylind Part No.-3128313401 , Hydr. Cylind Part No.-3128313402 , Hydr.Cylinde Part No.-3128313403 , Hydr.Cylinde Part No.-3128313404 , Bushing Part No.-3128313405 , Protection Part No.-3128313440 , Protection Part No.-3128313442 , Valve Part No.-3128313444 , Bearing Set Part No.-3128313446 , Protection Part No.-3128313455 , Hyd. Cylinde Part No.-3128313457 , Rope Attachm Part No.-3128313468 , Valve Sectio Part No.-3128313479 , Press.Regula Part No.-3128313525 , Press.Regula Part No.-3128313527 , Cradle Plate Part No.-3128313579 , Rope Tension Part No.-3128313591 , Bushing Part No.-3128313618 , Holder Part No.-3128313621 , Support Half Part No.-3128313623 , Lock Ring Part No.-3128313680 , Hyd.Cylinder Part No.-3128313751 , Hyd.Cylinder Part No.-3128313752 , Hyd.Cylinder Part No.-3128313753 , Stopp Part No.-3128313821 , Attachment Part No.-3128313830 , Wire Attachm Part No.-3128313834 , Stop Plate Part No.-3128313846 , Stop Pin Part No.-3128313855 , Sight Part No.-3128313862 , Protechtion Part No.-3128313983 , Spacer Part No.-3128314002 , Holder Set Part No.-3128314012 , Holder Set Part No.-3128314013 , Protection Part No.-3128314086 , Cradle Plate Part No.-3128314094 , Cradle Set Part No.-3128314095 , Holder Set Part No.-3128314096 , Holder Set Part No.-3128314097 , Cradle Part No.-3128314098 , Cradle Set Part No.-3128314099 , Spacer Part No.-3128314101 , Spacer Part No.-3128314102 , Vinkel Part No.-3128314103 , Pulley Wheel Part No.-3128314104 , Spacer Part No.-3128314105 , Cradle Plate Part No.-3128314107 , End Piece Se Part No.-3128314113 , Cover Part No.-3128314135 , Spare P. Se Part No.-3128314138 , Gable Plate Part No.-3128314166 , Bushing Part No.-3128314167 , Pipe Part No.-3128314179 , Washer Part No.-3128314231 , Adapter Plat Part No.-3128314232 , Hyd.Cylinder Part No.-3128314237 , Hyd.Cylinder Part No.-3128325723 , Hyd.Cylinder Part No.-3128325725 , Hydr. Cylind Part No.-3128325726 , Hyd.Cylinder Part No.-3128325727 , Seal Kit Part No.-3128314257 , Piston Part No.-3128314258 , Cover Part No.-3128314260 , Piston Rod Part No.-3128314263 , Attachment Part No.-3128314273 , Rubber Cloth Part No.-3128314277 , Arm Part No.-3128314278 , Bracket Part No.-3128314284 , Konsol Part No.-3128314285 , Hub Part No.-3128314289 , Protection Part No.-3128314291 , Shaft Part No.-3128314293 , Seal Kit Part No.-3128314316 , Shaft Part No.-3128314327 , Hardware Kit Part No.-3128314328 , Sliding Piec Part No.-3128314344 , Plate Part No.-3128314345 , Support Fram Part No.-3128314346 , Shaft Part No.-3128314355 , Bearing Kit Part No.-3128314445 , Seal Kit Part No.-3128314467 , Cradle Set Part No.-3128314535 , Hydraulic Pi Part No.-3128314624 , Overcenter V Part No.-3128314632 , Bearing Housing Part No.-3128314643 , Bearing Hous Part No.-3128314644 , Attachment Part No.-3128314645 , Valve Block Part No.-3128314651 , Bearing Hous Part No.-3128314659 , Cylinder Lin Part No.-3128314672 , Protection Part No.-3128314675 , Shaft Part No.-3128314695 , Hydr. Cylind Part No.-3128314696 , Connection Part No.-3128314701 , Spacer Tube Part No.-3128314702 , Cradle Part No.-3128314721 , Shim Part No.-3128314749 , Housing Part No.-3128314750 , Bushing Half Part No.-3128314768 , Bushing Half Part No.-3128314769 , Bushing Half Part No.-3128314770 , Sensor Set Part No.-3128314772 , Stop Set Part No.-3128314774 , End Piece Se Part No.-3128314785 , Holder Part No.-3128314800 , Bracket Part No.-3128314981 , Stinger Part No.-3128314982 , Cradle Part No.-3128315024 , Retur Rope Part No.-3128315026 , Stop Set Part No.-3128315028 , Back Head Part No.-3128315039 , Adjusting Plate Part No.-3128315071 , Tube Shaft 1 Part No.-3128315093 , Protect. Shi Part No.-3128315101 , Clamp Part No.-3128315102 , Tube Shaft Part No.-3128315104 , Tube Shaft 2 Part No.-3128315106 , Tube Shaft 2 Part No.-3128315109 , Tube Shaft 3 Part No.-3128315122 , Double Ch.Va Part No.-3128315144 , Bleeder Scre Part No.-3128315148 , Pressure Scr Part No.-3128315204 , Seal Washer Part No.-3128315205 , Seal Kit Part No.-3128315207 , Locking Spri Part No.-3128315253 , Drill Steel Part No.-3128315256 , Seal Kit Part No.-3128315263 , Bellow Part No.-3128315274 , Linear Senso Part No.-3128315283 , End Plate Part No.-3128315288 , Wear Plate Part No.-3128315294 , Wear Plate Part No.-3128315295 , Bracket Part No.-3128315365 , Sleeve Part No.-3128315372 , Sleeve Part No.-3128315374 , Sleeve Part No.-3128315375 , Sleeve Part No.-3128315376 , Sleeve Part No.-3128315377 , Sleeve Part No.-3128315378 , Sleeve Part No.-3128315379 , Hydraulcylin Part No.-3128315401 , Hydraulcylin Part No.-3128315402 , Shaft Part No.-3128315437 , Flange Part No.-3128315450 , Shaft Compl. Part No.-3128315451 , Shaft Part No.-3128315562 , Interm.Drill Part No.-3128315577 , Bushing Part No.-3128315578 , Support Plat Part No.-3128315585 , Rubber Prote Part No.-3128315599 , Planet Gear Part No.-3128315673 , Hydr. Cylind Part No.-3128315692 , Tube Shaft 1 Part No.-3128315800 , Bracket Part No.-3128315802 , Attachment Part No.-3128315830 , Hyd.Cylinder Part No.-3128315850 , Plate Part No.-3128315851 , Seal Part No.-3128315857 , Shaft Part No.-3128315868 , Hub Part No.-3128315903 , Driver Part No.-3128315947 , Stopper Part No.-3128315970 , Drill Steel Part No.-3128316002 , Fastplatta Part No.-3128316008 , Attachment Part No.-3128316023 , Rubber Washe Part No.-3128316024 , Rubber Washe Part No.-3128316026 , Bolt Rotator Part No.-3128316178 , Bearing Reta Part No.-3128316180 , Adapter Part No.-3128316181 , Dividing Dis Part No.-3128316315 , Dividing Dis Part No.-3128316316 , Protection Part No.-3128316343 , Guide Tube Part No.-3128316434 , Shaft Part No.-3128316437 , Roller Part No.-3128316438 , Dividing Dis Part No.-3128316559 , Dividing Dis Part No.-3128316560 , Attachment Part No.-3128316618 , Drive Wheel Part No.-3128316639 , Cover Part No.-3128316673 , Conversionk Part No.-3128316687 , Cylinder Bra Part No.-3128316697 , Drill Steel Part No.-3128316810 , Cradle Part No.-3128316847 , Hydr. Cylind Part No.-3128316882 , Rope Tension Part No.-3128316895 , Turning Cyli Part No.-3128316908 , Connectionbl Part No.-3128316964 , Seal-Kit Part No.-3128317003 , Circlip Part No.-3128317010 , Seal-Kit Part No.-3128317024 , Shaft Part No.-3128317047 , Roller Part No.-3128317048 , Pist.Rod Compl Part No.-3128317083 , Seal Kit Part No.-3128317103 , Piston Rod Part No.-3128317120 , Gripper Part No.-3128317260 , Pin Part No.-3128317263 , Piston Rod Part No.-3128317265 , Bushing Part No.-3128317268 , Wiper Part No.-3128317273 , Angle Sensor Part No.-3128317280 , Sensor Part No.-3128317285 , Protection Part No.-3128317303 , Hydraulcylin Part No.-3128317344 , Shaft Part No.-3128317418 , Attachment Part No.-3128317430 , Wiper Part No.-3128317431 , Hose Clamp Part No.-3128317499 , Pipe Part No.-3128317534 , Cover Part No.-3128317535 , Coupling Part No.-3128317552 , Seal Kit Part No.-3128317554 , Guide Part No.-3128317575 , Support Part No.-3128317576 , Top Part Part No.-3128317578 , Telescope Set Part No.-3128317604 , Extension Tu Part No.-3128317605 , Back Head Part No.-3128317616 , Key Part No.-3128317617 , Cylinder Part No.-3128317698 , Hydr. Cylind Part No.-3128317803 , Piston Rod Part No.-3128317805 , Sleeve Part No.-3128317838 , Hydraulic Bl Part No.-3128318091 , Shims Part No.-3128318093 , Hydraulic Bl Part No.-3128318094 , Support Half Part No.-3128318168 , Hose Attachment Part No.-3128318189 , Cradle Part No.-3128318215 , Cradle Plate Part No.-3128318229 , Holder Part No.-3128318238 , Drill Steel Part No.-3128318260 , Bushing Half Part No.-3128318304 , Cylind.Bracket Part No.-3128318312 , Cylinder Bra Part No.-3128318313 , Disk Part No.-3128318326 , Guide Strip Part No.-3128318343 , Protection A Part No.-3128318347 , Dr.St.Supp.S Part No.-3128318381 , Drill Steel Part No.-3128318382 , Shaft Part No.-3128318493 , Shaft Part No.-3128318494 , Shaft Part No.-3128318496 , End Piece Part No.-3128318512 , Hub Part No.-3128318518 , Cover Part No.-3128318531 , Pin Part No.-3128318532 , Rubber Cloth Part No.-3128318533 , Plate Part No.-3128318534 , Attachment Part No.-3128318535 , Hose Holder Part No.-3128318542 , Chain Part No.-3128318543 , Holder Part No.-3128318577 , Bearing Set Part No.-3128318636 , Mellanborrst Part No.-3128318665 , Interm.Suppo Part No.-3128318678 , Spacer Part No.-3128318696 , End Plate Part No.-3128318698 , Cradle Part No.-3128318700 , Rope Holder Part No.-3128318720 , Drill Carria Part No.-3128318723 , Expanding Sh Part No.-3128318768 , Attachment Part No.-3128318839 , Drill Holder Part No.-3128318848 , Arm Part No.-3128318849 , Hydr. Cylinder Part No.-3128325731 , Attachment Part No.-3128318873 , Passbult Part No.-3128318877 , Flex.Element Part No.-3128318878 , Hose Holder Part No.-3128318961 , Bulkhead Conn. Part No.-3128318973 , Protection R Part No.-3128318974 , Hose Fender Part No.-3128318977 , Hose Holder Part No.-3128318981 , Konsol Part No.-3128318988 , Hydr. Cylind Part No.-3128319021 , Hose Holder Part No.-3128319156 , Yoke Part No.-3128319159 , Bearing Housing Part No.-3128319213 , Feed Holder Part No.-3128319222 , Piston Part No.-3128319249 , Cover Part No.-3128319251 , House Part No.-3128319252 , Flex. Coupli Part No.-3128319268 , Attachment Part No.-3128319269 , Cover Part No.-3128319270 , Front Plate Part No.-3128319299 , Back Part No.-3128320377 , Seal Kit Part No.-3128320379 , Sensor Prote Part No.-3128320380 , Cylinder Gua Part No.-3128320403 , Attachment Part No.-3128320586 , Stop Ring Ha Part No.-3128320622 , Dowel Part No.-3128320724 , Hydr. Cylind Part No.-3128320725 , Tube Shaft 1 Part No.-3128320774 , Slide Part No.-3128320788 , Attachment Part No.-3128320789 , Cradle Part No.-3128320790 , Shaft Part No.-3128320791 , Hydr.Cylinde Part No.-3128320803 , Holder Part No.-3128320845 , Support Disc Part No.-3128320892 , Attachment Part No.-3128320895 , Cylinder Part No.-3128320896 , Guide Spindle Part No.-3128320900 , Pin Part No.-3128320901 , Angle Sensor Part No.-3128321013 , Hydraulcylin Part No.-3128321089 , Hose Fender Part No.-3128321095 , Hydr. Cylinder Part No.-3128321252 , Spur Pinion Part No.-3128321300 , Feed Set Part No.-3128321368 , Boom Set Part No.-3128321405 , Sprocket Whe Part No.-3128321418 , Bulkhead Conn. Part No.-3128321511 , Pulley Wheel Part No.-3128321645 , Bolt Adaptor Part No.-3128321661 , Feed Holder Part No.-3128321771 , Feed Holder Part No.-3128321772 , Hyd Cylinder Part No.-3128321900 , Washer Part No.-3128321959 , Piston Rod Part No.-3128321985 , Bushing Part No.-5750531784 , Valve Part No.-8231120686 , Piston Part No.-3128322028 , Hose Holder Part No.-3128322121 , Hose Holder Part No.-3128322123 , Cover Part No.-3128322213 , Piston Rod Eye Part No.-3128322245 , Feed Holder Part No.-3128322350 , Cradle Part No.-3128322433 , Basic Part Set Part No.-3128322870 , Cylinder Part No.-3128322871 , Blade Spring Part No.-3128323144 , Blade Spring Part No.-3128323145 , Spacer Part No.-3128323293 , Hydr. Cylind Part No.-3128325731 , Clamp Part No.-3128006339 , Extension Tu Part No.-3128998040 , Extension Tu Part No.-3128998041 , Fuel Gauge Part No.-3135600010 , V-Ring Part No.-3137000364 , Lock Needle Part No.-3137148405 , Diode Module Part No.-3137167100 , Adapter Cabl Part No.-3138102004 , Bulldog Grip Part No.-3138505123 , Hyd.Pump Part No.-3150000041 , Seal Kit Part No.-3150000336 , Sealing Set Part No.-3153106190 , Gasket Set Part No.-3153211490 , Scraper Part No.-3153549700 , Gasket Set Part No.-3153623290 , Bricka Part No.-3153865000 , Exp.Shaft Part No.-3155177280 , Cradle Part No.-3155218901 , Exp.Shaft Part No.-3155236780 , Bushing Part No.-3155236800 , Gear Wheel Part No.-3161103500 , Retain.Nut Part No.-3161103600 , Ring Part No.-3161104100 , Ring Part No.-3161109000 , Retain.Nut Part No.-3161109400 , Cover Part No.-3161122500 , Cover Part No.-3161122900 , Ring Part No.-3161123000 , Sleeve Part No.-3161123100 , Gear Wheel Part No.-3161123200 , Ring Part No.-3161123300 , Spindle Part No.-3161123600 , Shim Part No.-3161123700 , Gasket Part No.-3163042701 , Strainer Part No.-3163042780 , Protec.Cap Part No.-3163173000 , Schackel Part No.-3163185400 , Pressure Swi Part No.-3176000082 , Pressure Swi Part No.-3176000083 , Loudwhistle Part No.-3176000090 , Lightning Part No.-3176000101 , Position Lig Part No.-3176000102 , Flat Pin Sle Part No.-3176000103 , Diod Part No.-3176000114 , Light Emit. Dio Part No.-3176000116 , Light Diode Part No.-3176000117 , Relay Part No.-3176000120 , Flasher Part No.-3176000124 , Back Piece Part No.-3176000129 , Reverse Alar Part No.-3176000156 , Light Emit. Dio Part No.-3176000160 , Motstand Part No.-3176000267 , Fuse Con. Term. Part No.-3176000270 , End Plate Part No.-3176000271 , Contactor Part No.-3176000272 , Relay Part No.-3176000273 , Distance Piece Part No.-3176000384 , Connect. Cable Part No.-3176000385 , Rectifier Part No.-3176000386 , Cooling Flan Part No.-3176000387 , Coil Part No.-3176000391 , Aux. Contact Part No.-3176000392 , Can-Open Cable Part No.-3176000434 , Diode Plinth Part No.-3176000501 , Cable Str.-Way Part No.-3176000510 , Transformato Part No.-3176000524 , Diode Part No.-3176000526 , Circuit Brea Part No.-3176000535 , Min Circ Bre Part No.-3176000537 , Fuse Part No.-3176000539 , Light Emit D Part No.-3176000547 , Amperemeter Part No.-3176000554 , Plinth Part No.-3176000567 , Fuse Part No.-3176000568 , Marking Plat Part No.-3176000572 , Cable, 1-Core Part No.-3176000577 , Cable, 1-Core Part No.-3176000579 , Cable, 1-Core Part No.-3176000581 , Cable, 1-Core Part No.-3176000582 , Emerg. Stop Box Part No.-3176000600 , Control Box Part No.-3176000611 , Push-Button Part No.-3176000614 , Kabel Komple Part No.-3176000630 , Kabel Komple Part No.-3176000638 , Kabel Komple Part No.-3176000650 , Kabel Komple Part No.-3176000654 , Cable, 1-Core Part No.-3176000663 , Relay Socket Part No.-3176000664 , Junction Box Part No.-3176000668 , Connector Lo Part No.-3176000683 , Main Switch Part No.-3176000701 , Level Sensor Part No.-3222314335 , Shrinking Tub. Part No.-3176000708 , Seal Kit Part No.-3176000710 , Resistor Part No.-3176000717 , Fuse Part No.-3176000738 , Terminal Blo Part No.-3176000740 , Terminal Blo Part No.-3176000745 , Tidrela Part No.-3176000762 , Relay Module Part No.-3176000769 , Coil Part No.-3176000784 , Back Part Part No.-3176000794 , Back Part Part No.-3176000795 , Back Part Part No.-3176000799 , Signal Cable Part No.-3176000985 , Signal Cable Part No.-3176000991 , Signal Cable Part No.-3176000993 , Signal Cable Part No.-3176000994 , Signal Cable Part No.-3176000995 , Signal Cable Part No.-3176000996 , Signal Cable Part No.-3176000997 , Signal Cable Part No.-3176000998 , Signal Cable Part No.-3176000999 , Signal Cable Part No.-3176001001 , Signal Cable Part No.-3176001003 , Signal Cable Part No.-3176001004 , Signal Cable Part No.-3176001005 , Signal Cable Part No.-3176001006 , Signal Cable Part No.-3176001007 , Signal Cable Part No.-3176001009 , Signal Cable Part No.-3176001010 , Signal Cable Part No.-3176001011 , Signal Cable Part No.-3176001013 , Signal Cable Part No.-3176001014 , Signal Cable Part No.-3176001015 , Signal Cable Part No.-3176001016 , Signal Cable Part No.-3176001018 , Signal Cable Part No.-3176001027 , Signal Cable Part No.-3176001028 , Signal Cable Part No.-3176001030 , Signal Cable Part No.-3176001034 , Signal Cable Part No.-3176001046 , Signal Cable Part No.-3176001049 , Signal Cable Part No.-3176001063 , Signal Cable Part No.-3176001065 , Signal Cable Part No.-3176001067 , Signal Cable Part No.-3176001069 , Signal Cable Part No.-3176001071 , Signal Cable Part No.-3176001074 , Signal Cable Part No.-3176001075 , Signal Cable Part No.-3176001077 , Signal Cable Part No.-3176001078 , Signal Cable Part No.-3176001079 , Signal Cable Part No.-3176001080 , Signal Cable Part No.-3176001081 , Signal Cable Part No.-3176001083 , Signal Cable Part No.-3176001084 , Signal Cable Part No.-3176001085 , Signal Cable Part No.-3176001087 , Signal Cable Part No.-3176001088 , Signal Cable Part No.-3176001089 , Signal Cable Part No.-3176001091 , Signal Cable Part No.-3176001093 , Signal Cable Part No.-3176001094 , Signal Cable Part No.-3176001095 , Signal Cable Part No.-3176001110 , Signal Cable Part No.-3176001120 , Signal Cable Part No.-3176001127 , Signalkabel Part No.-3176001142 , Signal Cable Part No.-3176001143 , Signal Cable Part No.-3176001144 , Signal Cable Part No.-3176001149 , Signal Cable Part No.-3176001150 , Signal Cable Part No.-3176001152 , Signal Cable Part No.-3176001189 , Signal Cable Part No.-3176001190 , Signal Cable Part No.-3176001191 , Signal Cable Part No.-3176001193 , Connector Part No.-3176001208 , Light Emit. Part No.-3176003126 , Safetyrelay Part No.-3176001246 , Cable, 1-Core Part No.-3176001288 , Vacuum Switch Part No.-3176001299 , F136, Cable Part No.-3176001362 , Control Box Part No.-3176001463 , Emerg. Stop Box Part No.-3176001465 , Switch Part No.-3176001486 , Mount Part No.-3176001499 , Power Unit Part No.-3176001518 , Fuse Holder Part No.-3176001533 , Bridge Conn. Part No.-3176001597 , Plinth Module Part No.-3176001609 , Control Box Part No.-3176001622 , Control Box Part No.-3176001628 , Relay Part No.-3176001644 , Sleeve Part No.-3176001668 , Spotlight Part No.-3176001696 , Can-Open Cable Part No.-3176001733 , Signal Cable Part No.-3176001981 , Signal Cable Part No.-3176001985 , Signal Cable Part No.-3176001986 , Signal Cable Part No.-3176001987 , Signal Cable Part No.-3176001988 , Signal Cable Part No.-3176001989 , Signal Cable Part No.-3176001990 , Signal Cable Part No.-3176001991 , Signal Cable Part No.-3176001992 , Signal Cable Part No.-3176001996 , Main Cable Part No.-3176002073 , Main Cable Part No.-3176002074 , Power Supply Part No.-3176002076 , Main Cable Part No.-3176002077 , Main Cable Part No.-3176002099 , Holder Part No.-3176002111 , Min Circ Bre Part No.-3176002112 , Connector Part No.-3176002148 , Main Cable Part No.-3176002300 , Main Cable Part No.-3176002301 , Main Cable Part No.-3176002302 , Main Cable Part No.-3176002305 , Main Cable Part No.-3176002309 , Main Cable Part No.-3176002314 , Main Cable Part No.-3176002315 , Main Cable Part No.-3176002402 , Main Cable Part No.-3176002403 , Main Cable Part No.-3176002404 , Main Cable Part No.-3176002405 , Main Cable Part No.-3176002407 , Main Cable Part No.-3176002408 , Main Cable Part No.-3176002416 , Kabel Part No.-3176002513 , Signal Cable Part No.-3176002524 , Signalkabel Part No.-3176002575 , Hour Meter Part No.-3176002614 , Sensor Cable Part No.-3176002624 , Battery Switch Part No.-3176002697 , Drilled Box Part No.-3176002702 , Drilled Box Part No.-3176002704 , Main Switch Part No.-3176002830 , Circuit Breaker Part No.-3176002831 , Switch Part No.-3176002833 , Coil Part No.-3176002834 , Timing Relay Part No.-3176005973 , Pressure Switch Part No.-3176002910 , Plug Part No.-3176002932 , Protection Hose Part No.-3176002957 , Protection Hose Part No.-3176002958 , Protection Hose Part No.-3176002959 , Protection Hose Part No.-3176002961 , Protection Hose Part No.-3176002963 , Hose Coupling Part No.-3176002969 , Hose Coupling Part No.-3176002970 , Cable Complete Part No.-3176003017 , Temp.Sensor Part No.-3176003042 , Spotlight Part No.-3176003077 , Converter Part No.-3176003086 , Flasher Unit Part No.-3176003125 , Light Emit. Dio Part No.-3176003131 , Light Emit. Part No.-3176003132 , Light Emit. Dio Part No.-3176003133 , Timing Relay Part No.-3176003266 , Monitor Part No.-3176003460 , Holder Set Part No.-3176003462 , Timing Relay Part No.-3176003527 , Timing Relay Part No.-3176003528 , Attachment Part No.-3176003539 , Connector Part No.-3176003596 , Headlight Part No.-3176003688 , Headlight Part No.-3176003741 , Contact Sleeve Part No.-3176003747 , Safety Relay Part No.-3176004006 , Flash Light Part No.-3176004894 , Protection Hose Part No.-3176005031 , Protection Hose Part No.-3176005035 , Protection Hose Part No.-3176005038 , Adapter Part No.-3176005042 , Adapter Part No.-3176005043 , Adapter Part No.-3176005044 , Level Switch Part No.-3176006074 , Relay Part No.-3176005906 , Switch Part No.-3176005915 , Contact Block Part No.-3176005916 , Level Switch Part No.-3176005923 , Level Sensor Part No.-3176006074 , Camera Part No.-3176006092 , Cable, 1-Core Part No.-3176006125 , Nipple Part No.-3176006200 , Nipple Part No.-3176006300 , Signal Cable Part No.-3176006304 , Nipple Part No.-3176006400 , Nipple Part No.-3176006500 , Nipple Part No.-3176016600 , Nipple Part No.-3176016700 , Nipple Part No.-3176052900 , Contactor Part No.-3176100304 , Nipple Part No.-3176127100 , Nipple Part No.-3176130000 , Hexagon Nipple Part No.-3176130100 , Nippel Part No.-3176147200 , Nipple Part No.-3176150900 , Nipple Part No.-3176151000 , Nipple Part No.-3176152200 , Nipple Part No.-3176152300 , Nipple Part No.-3176152400 , Nipple Part No.-3176158600 , Nipple Part No.-3176167100 , Nipple Part No.-3176167200 , Pr.Regulator Part No.-3176185600 , Pr. Regulato Part No.-3176185601 , Air Hose Part No.-3176187801 , Nipple Part No.-3176190000 , Nipple Part No.-3176190100 , Nippel Part No.-3176194200 , Nipple Part No.-3176194300 , Nipple Part No.-3176194400 , Nipple Part No.-3176194500 , Nipple Part No.-3176194600 , Nipple Part No.-3176194700 , Nipple Part No.-3176194800 , Nipple Part No.-3176194900 , Coupling Part No.-3176205207 , Coupling Part No.-3176205211 , Sleeve Part No.-3176205225 , Connect. Plate Part No.-3176205300 , Nippel Part No.-3176213100 , Nippel Part No.-3176227900 , Nipple Part No.-3176264400 , Nipple Part No.-3176264500 , Bushing Part No.-3176270300 , Pr.Rel.Valve Part No.-3176271100 , Bushing Part No.-3176275700 , Nipple Part No.-3176278600 , Bushing Part No.-3176279600 , Nipple Part No.-3176280900 , Nipple Part No.-3176282100 , Nipple Part No.-3176290400 , Nipple Part No.-3176292900 , Cap Nut Part No.-3176293000 , Nipple Part No.-3176293200 , Return Block Part No.-3176293510 , O-Ring Part No.-3176299400 , Nipple Part No.-3176303100 , Nipple Part No.-3176303200 , Nipple Part No.-3176303500 , Nipple Part No.-3176303600 , Nipple Part No.-3176303700 , Nipple Part No.-3176304000 , Nipple Part No.-3176304200 , Pipe Coupling Part No.-3176304580 , Pipe Coupling Part No.-3176304880 , Pipe Coupling Part No.-3176304980 , Nipple Part No.-3176305000 , Nipple Part No.-3176305100 , Nipple Part No.-3176305200 , Nipple Part No.-3176305300 , Nippel Part No.-3176306000 , Ball Valve Part No.-3176313800 , Siltrumma Part No.-3176352300 , Sil Part No.-3176352380 , Nipple Part No.-3176355500 , Nippel Part No.-3176355600 , U-Bolt Part No.-3176360400 , Bagageband Part No.-3176368100 , Hydraulic Ho Part No.-3176373300 , Nipple Part No.-3176382800 , Nipple Part No.-3176382900 , Kopplingsplint Part No.-3176404900 , Ändplatta Part No.-3176404901 , Bridge Conn. Part No.-3176404902 , Terminal Blo Part No.-3176404903 , Terminal Blo Part No.-3176404904 , End Plate Part No.-3176404905 , Terminal Block Part No.-3176404906 , Terminal Blo Part No.-3176404907 , Termial Bloc Part No.-3176404908 , End Plate Part No.-3176404909 , Kopplingsplint Part No.-3176404911 , Ändplatta Part No.-3176404912 , Bridge Conn. Part No.-3176404913 , Terminal Blo Part No.-3176404915 , End Plate Part No.-3176404916 , Fuse Con. Te Part No.-3176404918 , Terminal Blo Part No.-3176404920 , End Plate Part No.-3176404921 , Bridge Conn Part No.-3176404925 , Terminal Blo Part No.-3176404926 , Terminal Block Part No.-3176404927 , End Plate Part No.-3176404928 , Kopplingsplint Part No.-3176404930 , Kopplingsplint Part No.-3176404932 , Bridge Conn. Part No.-3176404934 , Terminal Blo Part No.-3176404935 , Ändplatta Part No.-3176404938 , Terminal Blo Part No.-3176404940 , End Support Part No.-3176404950 , Ändstöd Part No.-3176404951 , End Support Part No.-3176404952 , Marking Plat Part No.-3176404961 , Marking Plat Part No.-3176404962 , Marking Plat Part No.-3176404963 , Marking Plat Part No.-3176404964 , Marking Plat Part No.-3176404965 , Marking Plat Part No.-3176404966 , Marking Plate Part No.-3176404967 , Marking Plat Part No.-3176404968 , Marking Plat Part No.-3176404975 , Marking Plate Part No.-3176404989 , Marking Plat Part No.-3176404990 , Marking Plat Part No.-3176404991 , Marking Plate Part No.-3176404996 , Diod Part No.-3176410800 , Relä Part No.-3176413000 , Fuse Part No.-3176415600 , Bulb Part No.-3176415800 , Glow Lamp Part No.-3176416410 , Cable Gland Part No.-3176422132 , Bulb Part No.-3176424501 , Automatsäkring Part No.-3176425801 , Relay Part No.-3176426006 , Relay Part No.-3176426007 , Relay Part No.-3176426008 , Relay Part No.-3176426009 , Relä Part No.-3176426101 , Relay Part No.-3176426102 , Reläsockel Part No.-3176426200 , Vibr.Damper Part No.-3176428100 , Socket Outle Part No.-3176428514 , Circ.Closer Part No.-3176428800 , Halogen Lamp Part No.-3176430301 , El-Motor Part No.-3176431104 , El-Motor Part No.-3176431108 , El-Motor Part No.-3176431207 , El. Motor Part No.-3176431211 , El-Motor Part No.-3176431302 , El-Motor Part No.-3176431310 , El-Motor Part No.-3176431314 , Mincircbreak Part No.-3176432204 , Circuit Brea Part No.-3176432252 , Reläsockel Part No.-3176432402 , Capacitor Part No.-3176432502 , Capacitor Part No.-3176432503 , Diode Unit Part No.-3176432601 , Likriktare Part No.-3176432903 , Likriktare Part No.-3176432905 , Cool.Flange Part No.-3176432930 , Bellows Part No.-3176434102 , Dipper Part No.-3176434106 , Contact Bloc Part No.-3176434107 , Controller Part No.-3176434120 , Sleeve Dev. Part No.-3176434302 , Cover Part No.-3176434303 , Pin Insert Part No.-3176434402 , Cover Part No.-3176434403 , Term.Block Part No.-3176436201 , Mounting Rail Part No.-3176436308 , Relay Socket Part No.-3176437002 , Diode Unit Part No.-3176437201 , Fuse Part No.-3176439400 , Socket Outlet Part No.-3176442207 , Mark.Plate Part No.-3176449101 , Mark.Plate Part No.-3176449103 , Marking Plate Part No.-3176449104 , Marking Plate Part No.-3176449105 , Mark.Plate Part No.-3176449106 , Terminal Blo Part No.-3176449150 , Automatsäkring Part No.-3176449201 , Automatsäkring Part No.-3176449202 , Automatsäkring Part No.-3176449203 , Automatsäkring Part No.-3176449204 , M.Circ Break Part No.-3176449206 , M.Circ.Break Part No.-3176449207 , Circuit Brea Part No.-3176449212 , Circuit Brea Part No.-3176449214 , Min Cirk. Br Part No.-3176449215 , M.Circ. Brea Part No.-3176449221 , Bulb Part No.-3176449400 , Transformer Part No.-3176450524 , Transformer Part No.-3176450525 , Transformer Part No.-3176450527 , Transformer Part No.-3176450538 , Transformer Part No.-3176450560 , Transformer Part No.-3176450561 , Earthfaultre Part No.-3176450603 , Earthfaultre Part No.-3176450605 , Ignit.Lock Part No.-3176451100 , Level Switch Part No.-3176453102 , Level Switch Part No.-3176453103 , Level Switch Part No.-3176453104 , Level Switch Part No.-3176453105 , Level Guard Part No.-3176453106 , Joy Stick Part No.-3176455602 , Socket Outle Part No.-3176456803 , Plate Part No.-3176457602 , Gasket Part No.-3176457603 , Press.Guard Part No.-3176458901 , Press.Guard Part No.-3176458904 , Press Switch Part No.-3176458905 , Pressure Swi Part No.-3176458906 , Limit Swich Part No.-3176462210 , Limit Switch Part No.-3176462230 , Branch Conta Part No.-3176464438 , Nipple Part No.-3176500000 , Nipple Part No.-3176501800 , U-Bolt Part No.-3176511100 , Slangledning Part No.-3176522000 , Slangledning Part No.-3176522100 , Valve Part No.-3176523300 , Strainer Part No.-3176530980 , Cap Part No.-3176531300 , Regulator Part No.-3176534300 , Strain.Drum Part No.-3176535100 , Strainer Part No.-3176535180 , Damper Part No.-3176540900 , Direct.Valve Part No.-3176541681 , Nippel Part No.-3176542700 , Nippel Part No.-3176542800 , Cap Part No.-3176542900 , Assembly Strip Part No.-3176547504 , Nippel Part No.-3176553500 , Direct.Valve Part No.-3176553880 , Direction Va Part No.-3176553882 , Direction Va Part No.-3176553883 , Plug Part No.-3176556300 , U-Bolt Part No.-3176558810 , Slangledning Part No.-3176567000 , Slangledning Part No.-3176567900 , Slangledning Part No.-3176568000 , Slangledning Part No.-3176568100 , Slangledning Part No.-3176568500 , Slangledning Part No.-3176568700 , O-Ring Part No.-3176593800 , Valve Part No.-3176595800 , Gauge Part No.-3176601900 , Press.Gauge Part No.-3176602000 , Gauge Part No.-3176602200 , Nipple Part No.-3176603600 , Nipple Part No.-3176603700 , Nippel Part No.-3176603900 , Plate Part No.-3176610000 , Plate Part No.-3176610100 , Plate Part No.-3176612600 , Nipple Part No.-3176630100 , Slangledning Part No.-3176633600 , Nippel Part No.-3176634400 , Nippel Part No.-3176634800 , Nipple Part No.-3176634900 , Nippel Part No.-3176635100 , Nipple Part No.-3176635200 , Nipple Part No.-3176635300 , Nipple Part No.-3176648300 , Slangledning Part No.-3176648600 , Nippel Part No.-3176649500 , Nipple Part No.-3176649600 , Nipple Part No.-3176649700 , Nipple Part No.-3176649800 , Nippel Part No.-3176649900 , Nipple Part No.-3176650000 , Nippel Part No.-3176650100 , Nippel Part No.-3176650200 , Nipple Part No.-3176650300 , Nippel Part No.-3176650400 , Nippel Part No.-3176650500 , Nipple Part No.-3176650600 , Nipple Part No.-3176650700 , Nipple Part No.-3176650800 , Nippel Part No.-3176650900 , Nipple Part No.-3176651000 , Nippel Part No.-3176651100 , Nipple Part No.-3176651200 , Nippel Part No.-3176651300 , Nipple Part No.-3176651400 , Nipple Part No.-3176651500 , Nipple Part No.-3176651600 , Nipple Part No.-3176651700 , Nipple Part No.-3176651800 , Nipple Part No.-3176651900 , Nipple Part No.-3176652000 , Nipple Part No.-3176652100 , Nipple Part No.-3176652200 , Nipple Part No.-3176652300 , Nipple Part No.-3176652400 , Nipple Part No.-3176652500 , Nipple Part No.-3176652600 , Nipple Part No.-3176652700 , Nipple Part No.-3176652800 , Nipple Part No.-3176652900 , Nipple Part No.-3176653000 , Nipple Part No.-3176653100 , Nipple Part No.-3176653200 , Nipple Part No.-3176653300 , Nipple Part No.-3176653400 , Nippel Part No.-3176653500 , Nipple Part No.-3176653600 , Nipple Part No.-3176653700 , Nipple Part No.-3176653900 , Nippel Part No.-3176654000 , Nipple Part No.-3176654200 , Nipple Part No.-3176654300 , Nipple Part No.-3176654400 , Nipple Part No.-3176654700 , Nipple Part No.-3176654800 , Nippel Part No.-3176654900 , Elbow Part No.-3176655000 , Elbow Part No.-3176655100 , Nippel Part No.-3176655200 , Nipple Part No.-3176655300 , Nipple Part No.-3176655400 , Nipple Part No.-3176655500 , Nipple Part No.-3176655600 , Nipple Part No.-3176655700 , Nipple Part No.-3176655800 , Nipple Part No.-3176655900 , Nippel Part No.-3176656000 , Nipple Part No.-3176656100 , Nipple Part No.-3176656200 , Nipple Part No.-3176656300 , Nippel Part No.-3176656400 , Nipple Part No.-3176656500 , Nippel Part No.-3176656600 , Nippel Part No.-3176656700 , Nipple Part No.-3176656800 , Nipple Part No.-3176656900 , Nipple Part No.-3176657000 , Elbow Part No.-3176657100 , Nipple Part No.-3176657200 , Nipple Part No.-3176657300 , Nipple Part No.-3176657400 , Nipple Part No.-3176657500 , Nippel Part No.-3176657600 , Nipple Part No.-3176657700 , Nipple Part No.-3176657800 , Nipple Part No.-3176657900 , Nipple Part No.-3176658000 , Nipple Part No.-3176658100 , Nipple Part No.-3176658200 , Nipple Part No.-3176658300 , Nipple Part No.-3176658400 , Nipple Part No.-3176658500 , Nipple Part No.-3176658600 , Nipple Part No.-3176658700 , Nipple Part No.-3176658800 , Nipple Part No.-3176658900 , Nippel Part No.-3176659000 , Nipple Part No.-3176659100 , Nipple Part No.-3176659200 , Nipple Part No.-3176659300 , Nipple Part No.-3176659400 , Nipple Part No.-3176659500 , Nipple Part No.-3176659600 , Nipple Part No.-3176659700 , Nipple Part No.-3176659800 , Nipple Part No.-3176659900 , Nipple Part No.-3176660000 , Nipple Part No.-3176660100 , Nipple Part No.-3176660200 , Nipple Part No.-3176660300 , Nipple Part No.-3176660400 , Nipple Part No.-3176660500 , Nipple Part No.-3176661200 , Cap Nut Part No.-3176661300 , Cap Nut Part No.-3176661400 , Cap Nut Part No.-3176661500 , Cap Nut Part No.-3176661600 , Cap Nut Part No.-3176661800 , Nipple Part No.-3176661900 , Nipple Part No.-3176662000 , Nipple Part No.-3176663300 , Nipple Part No.-3176663400 , Nipple Part No.-3176663500 , Nipple Part No.-3176663600 , Nipple Part No.-3176663700 , Nipple Part No.-3176663800 , Nipple Part No.-3176663900 , Nipple Part No.-3176664000 , Nipple Part No.-3176664100 , Nipple Part No.-3176664200 , Nipple Part No.-3176664300 , Nipple Part No.-3176664400 , Nipple Part No.-3176664500 , Nippel Part No.-3176664600 , Nipple Part No.-3176664700 , Nipple Part No.-3176664800 , Nipple Part No.-3176664900 , Nipple Part No.-3176665000 , Nipple Part No.-3176665100 , Nipple Part No.-3176665200 , Nipple Part No.-3176665300 , Nipple Part No.-3176665400 , Nipple Part No.-3176665500 , Nipple Part No.-3176665600 , Nipple Part No.-3176665700 , Nipple Part No.-3176665800 , Nipple Part No.-3176665900 , Nipple Part No.-3176666000 , Nipple Part No.-3176666100 , Nipple Part No.-3176666200 , Nipple Part No.-3176666300 , Nipple Part No.-3176666400 , Nipple Part No.-3176666500 , Nipple Part No.-3176666600 , Nipple Part No.-3176666800 , Nipple Part No.-3176666900 , Nipple Part No.-3176667000 , Nipple Part No.-3176667100 , Nipple Part No.-3176667200 , Nipple Part No.-3176667300 , Nipple Part No.-3176667400 , Nipple Part No.-3176667500 , Nipple Part No.-3176667600 , Nipple Part No.-3176667700 , Nipple Part No.-3176667800 , Nipple Part No.-3176667900 , Nipple Part No.-3176668000 , Nipple Part No.-3176668100 , Nipple Part No.-3176668200 , Nipple Part No.-3176668300 , Nipple Part No.-3176668400 , Nipple Part No.-3176668700 , Nipple Part No.-3176669000 , Nipple Part No.-3176669100 , Nipple Part No.-3176669200 , Nipple Part No.-3176669300 , Nipple Part No.-3176669400 , Nipple Part No.-3176669500 , Nipple Part No.-3176669600 , Nipple Part No.-3176669700 , Plug Part No.-3176669800 , Plug Part No.-3176669900 , Plug Part No.-3176670000 , Cap Part No.-3176670100 , Cap Part No.-3176670200 , Cap Part No.-3176670300 , Nipple Part No.-3176670800 , Flange Half Part No.-3176672300 , Cap Nut Part No.-3176678700 , Cap Nut Part No.-3176678800 , Strainer Part No.-3176679680 , Slangledning Part No.-3176685400 , Slangledning Part No.-3176685900 , Slangledning Part No.-3176686100 , Pr.Rel.Valve Part No.-3176696600 , Slangledning Part No.-3176697500 , Nipple Part No.-3176698100 , Nipple Part No.-3176698300 , Nipple Part No.-3176705800 , Nipple Part No.-3176707100 , Solen.Valve Part No.-3176710200 , Slangledning Part No.-3176713100 , Slangledning Part No.-3176718600 , Oil Cooler Part No.-3176718800 , Gasket Part No.-3176718803 , Gasket Part No.-3176718804 , Needle Valve Part No.-3176720800 , Nipple Part No.-3176730400 , Level Part No.-3176730900 , Nipple Part No.-3176731900 , Nippel Part No.-3176733600 , Nippel Part No.-3176733700 , Nipple Part No.-3176733800 , Nipple Part No.-3176733900 , Nipple Part No.-3176734000 , Nipple Part No.-3176734100 , Nipple Part No.-3176734200 , Bushing Part No.-3176735300 , Bushing Part No.-3176735500 , U-Bolt Part No.-3176735800 , U-Bolt Part No.-3176736800 , U-Bolt Part No.-3176738100 , Slangledning Part No.-3176744900 , Slangledning Part No.-3176745700 , Plate Part No.-3176757000 , Plate Part No.-3176757200 , Plate Part No.-3176757301 , Plate Part No.-3176757302 , Plate Part No.-3176757400 , Plate Part No.-3176757500 , Plastic Hose Part No.-3176760600 , Slangledning Part No.-3176764400 , Slangledning Part No.-3176766200 , Slangledning Part No.-3176766500 , Nipple Part No.-3176770300 , Nippel Part No.-3176770700 , Bushing Part No.-3176771400 , Nipple Part No.-3176775700 , Nipple Part No.-3176776700 , Nipple Part No.-3176785100 , Plug Part No.-3176786803 , Plug Part No.-3176786806 , Plug Part No.-3176786807 , Elbow Nipple Part No.-3176787200 , Nipple Part No.-3176787300 , Spring Part No.-3176787583 , Hydraulic Mo Part No.-3176788914 , Repair Kit Part No.-3176788915 , Bearing Set Part No.-3176788916 , Flange Half Part No.-3176792200 , Restriction Part No.-3176793700 , Nipple Part No.-3176796800 , Nipple Part No.-3176796900 , Nipple Part No.-3176797000 , Nipple Part No.-3176802600 , Nipple Part No.-3176802700 , Nipple Part No.-3176802800 , Cap Part No.-3176802900 , Nipple Part No.-3176804300 , Nipple Part No.-3176807600 , Nipple Part No.-3176807700 , Nipple Part No.-3176807800 , Nipple Part No.-3176812000 , Restrict.Set Part No.-3176814994 , Valve Cone Part No.-3176815300 , Nipple Part No.-3176825100 , F.Cont.Valve Part No.-3176826400 , Flow Cont.Valve Part No.-3176826401 , Flow Cont.Valve Part No.-3176826410 , Kabelstrumpa Part No.-3176826600 , Wire Me.Hose Part No.-3176826700 , Wire Me.Hose Part No.-3176826712 , Nipple Part No.-3176827000 , Nipple Part No.-3176827100 , Plug Part No.-3176828900 , Nipple Part No.-3176829200 , Shuttle Valve Part No.-3176837700 , Nipple Part No.-3176840200 , Nipple Part No.-3176842400 , Backventil Part No.-0823005018 , Nippel Part No.-3176848900 , Coupl.Half Part No.-3176850290 , Restriction Part No.-3176850500 , Plastic Hose Part No.-3176855500 , Seal Kit Part No.-3176864101 , Flow Guard Part No.-3176867000 , Micro Switch Part No.-3176867011 , Spare P.Set Part No.-3176867090 , Reduc.Valve Part No.-3176868100 , Press.Gauge Part No.-3176869500 , Gasket Part No.-3176871300 , Water Valve Part No.-3176879140 , Shut Off Valve Part No.-3176879150 , Nipple Part No.-3176887200 , Hydraulic Ho Part No.-3176888000 , Nipple Part No.-3176892700 , Nipple Part No.-3176897200 , Nipple Part No.-3176897300 , Backventil Part No.-0823005019 , Ampere Meter Part No.-3176913901 , Press.Guard Part No.-3176959602 , Spool Valve Part No.-3177000038 , Spool Valve Part No.-3177000040 , Seal Kit Part No.-3177000047 , Fan Part No.-6060007482 , Spring Set Part No.-3177000093 , Spring Set Part No.-3177000094 , Piston Set Part No.-3177000095 , Shaft Part No.-3177000096 , Sealing Set Part No.-3177000103 , Repair Kit Part No.-3177000158 , Spring Part No.-3177000167 , Disc Part No.-3177000168 , Disc Part No.-3177000169 , Bearing Part No.-3177000170 , Bend Part No.-3177000182 , Stud Part No.-3177000185 , Seal Part No.-3177000204 , O-Ring Part No.-3177000205 , Nut Part No.-3177000206 , Washer Part No.-3177000210 , O-Ring Part No.-3177000211 , Oil Plug Part No.-3177000217 , Gasket Part No.-3177000218 , Clamp Part No.-3177001100 , Disc Part No.-3177001301 , Roller Part No.-3177006001 , Guide Roller Part No.-3177006002 , Bearing Bushing Part No.-3177007400 , Bearing Bushing Part No.-3177007401 , Ecc. Latch Part No.-3177007403 , Crossing Nipple Part No.-3177007413 , Nipple Part No.-3177301200 , Coupling Part No.-3177301600 , Coupling Part No.-3177301601 , Bellow Part No.-3177302335 , Nipple Part No.-3177302500 , Press.Gauge Part No.-3177303200 , Pr.Red.Valve Part No.-3177303600 , Hydraulic Mo Part No.-3177303803 , Solenoid Part No.-3177303804 , Direct.Valve Part No.-3177304200 , Direct.Valve Part No.-3177304300 , Nipple Part No.-3177304500 , Nippel Part No.-3177304600 , Nipple Part No.-3177305400 , Valve Part No.-3177306000 , Nipple Part No.-3177306300 , Nipple Part No.-3177306400 , Nippel Part No.-3177306800 , Nipple Part No.-3177307000 , Hydr.Motor Part No.-3177307200 , Flange Part No.-3177307301 , Flange Part No.-3177307306 , Assembly Plate Part No.-3177307700 , Hydraulic Mo Part No.-3177307800 , Seal Kit Part No.-3177308002 , Hydraulmotor Part No.-3177308100 , Needle Valve Part No.-3177309010 , Direction Valve Part No.-3177309209 , Valve, Direc Part No.-3177309210 , Direct.Valve Part No.-3177309245 , Coil Part No.-6060002411 , Seal Kit Part No.-3177309253 , Nut Set Part No.-3177309254 , Coil Part No.-3177309255 , Valve, Direc Part No.-3177309260 , Seal Kit Part No.-3177309262 , Coil Part No.-3177309264 , Direction Va Part No.-3177309270 , Direction Va Part No.-3177309271 , Direction Va Part No.-3177309280 , Direction Va Part No.-3177309281 , Direction Va Part No.-3177309282 , Direction Va Part No.-3177309283 , Direction Va Part No.-3177309284 , Directional Valve Part No.-3177309288 , Direction Va Part No.-3177309289 , Nipple Part No.-3177309500 , Nipple Part No.-3177310700 , Blind Plate Part No.-3177311100 , F.Cont.Valve Part No.-3177312603 , Nipple Part No.-3177313200 , Nipple Part No.-3177313600 , Gauge Part No.-3177314700 , Direct.Valve Part No.-3177315605 , Direct.Valve Part No.-3177315607 , Direct.Valve Part No.-3177315608 , O-Ring Set Part No.-3177315790 , Direct.Valve Part No.-3177316510 , Seal Kit Part No.-3177316511 , Pr.Rel.Valve Part No.-3177317301 , Pr.Rel.Valve Part No.-3177317302 , Nipple Part No.-3177319000 , Nipple Part No.-3177319500 , Cap Part No.-3177319700 , Drain.Valve Part No.-3177501000 , Press.Gauge Part No.-3177502000 , Gauge Part No.-3177502100 , Gauge Part No.-3177502900 , Press.Gauge Part No.-3177503100 , Ball Cock Part No.-3177504800 , Press.Guard Part No.-3177700102 , Press.Guard Part No.-3177700105 , Manipulator Part No.-3177701700 , Connector Part No.-3177702313 , Sleeve Inser Part No.-3177702407 , Connector Part No.-3177702412 , Housing Part No.-3177702413 , Housing Part No.-3177702420 , Press.Guard Part No.-3186027901 , Mounting Rail Part No.-3214018100 , Pressure Switch Part No.-3214403300 , Flange Connect. Part No.-3214440100 , Switch Part No.-3214512700 , Double Ch.Valve Part No.-3214739100 , Flödesregulator Part No.-3214766981 , Seal Kit Part No.-3214767592 , Disk Part No.-3214779000 , Press.Red.Valve Part No.-3214871280 , Plug Part No.-3214871282 , Spring Part No.-3214871283 , Seal Kit Part No.-3214871287 , View Mirror Part No.-3214873401 , Arm Part No.-3214873402 , Direct.Valve Part No.-3214897280 , Direction Valve Part No.-3214897380 , Direction Va Part No.-3214897382 , Direction Valve Part No.-3214897480 , Plate Part No.-3214923400 , Sealing Set Part No.-3215234760 , Washer Part No.-3215511200 , Eye Ring Part No.-3215609400 , Drum Part No.-3215752100 , Bolt Part No.-3215752112 , Press.Red.Valve Part No.-3215959500 , Attachment Part No.-3215959510 , Fuse Part No.-3216153100 , Relay Part No.-3216178300 , Pr.Reg.Valve Part No.-3216346680 , Repair Kit Part No.-3216346690 , Clamp Part No.-3216355600 , Clamp Part No.-3216493600 , Saftey Cartr Part No.-3216523800 , Gasket Part No.-3216529500 , Stop Solenoi Part No.-3216853300 , Pr.Rel.Valve Part No.-3216917080 , Oljefilter Part No.-6060011415 , Protection Part No.-3216986500 , Push Button Part No.-3217000008 , Indicat. Lam Part No.-3217000009 , Ind. Lamp Part No.-3217000010 , Touch Guard Part No.-3217000032 , Push Button Part No.-3217000034 , Grate Part No.-3217000036 , Distance Pie Part No.-3217000040 , Cable Str.-Way Part No.-3217000146 , Cable Str.-Way Part No.-3217000147 , Cable Str.-Way Part No.-3217000148 , Cable Seal Part No.-3217000149 , Resistor Part No.-3217000306 , Cable, 1-Core Part No.-3217000339 , Fuse Part No.-3217000354 , Lamp Pushbut Part No.-3217000375 , Push Button Part No.-3217000377 , Push Button Part No.-3217000379 , Overload Rel Part No.-3217000407 , Alarm Pushbu Part No.-3217000411 , Therm. Prot Part No.-3217000420 , Trigger Part No.-3217000445 , Connection S Part No.-3217000451 , Main Switch Part No.-3217000460 , Circuit Brea Part No.-3217000461 , Circuit Brea Part No.-3217000467 , Switch Part No.-3217000508 , Palm Grip Part No.-3217000552 , Coil Part No.-3217000553 , Circuit Brea Part No.-3217000556 , Main Switch Part No.-3217000557 , Circuit Brea Part No.-3217000558 , Main Switch Part No.-3217000559 , Circuit Brea Part No.-3217000560 , Touch Guard Part No.-3217000567 , Plinth Module Part No.-3217000600 , Pressure Swi Part No.-3217000621 , Trigger Part No.-3217001002 , Trigger Part No.-3217001003 , Trigger Part No.-3217001004 , Trigger Part No.-3217001006 , Control Switch Part No.-3217001011 , Palm Grip Part No.-3217001012 , Palm Grip Part No.-3217001016 , Palm Grip Part No.-3217001020 , Palm Grip Part No.-3217001022 , Palm Grip Part No.-3217001023 , Palm Grip Part No.-3217001029 , Palm Grip Part No.-3217001030 , Palm Grip Part No.-3217001031 , Lamppushbutt Part No.-3217001041 , Lamppushbutt Part No.-3217001042 , Lamppushbutt Part No.-3217001043 , Lamp Calotte Part No.-3217001045 , Lamp Calotte Part No.-3217001047 , Key Switch Part No.-3217001049 , Lamp Insert Part No.-3217001057 , Lamp Insert Part No.-3217001058 , Lamp Insert Part No.-3217001059 , Lamp Insert Part No.-3217001061 , Lamp Insert Part No.-3217001063 , Intermed. Pa Part No.-3217001072 , Contact Bloc Part No.-3217001073 , Sealing Cove Part No.-3217001075 , Protection R Part No.-3217001076 , Mushroom But Part No.-3217001079 , Mush. Button Part No.-3217001081 , Mush. Button Part No.-3217001082 , Emerg. Stop Box Part No.-3217001085 , Mushroom Pus Part No.-3217001087 , Lamppushbutt Part No.-3217001090 , Sealing Cove Part No.-3217001106 , Mushr. Butto Part No.-3217001107 , Base Box Part No.-3217001111 , Contact Block Part No.-3217001113 , Push Buttom Part No.-3217001200 , Push Button Part No.-3217001201 , Switch Part No.-3217001203 , Switch Part No.-3217001204 , Indicationl Part No.-3217001205 , Push Button Part No.-3217001206 , Push Button Part No.-3217001207 , Lamppushbutt Part No.-3217001209 , Switch Part No.-3217001211 , Switch Part No.-3217001212 , Switch Part No.-3217001214 , Switch Part No.-3217001222 , Lamppushbutt Part No.-3217001227 , Mushroom Pus Part No.-3217001235 , Pushbutton Part No.-3217001238 , Switch Part No.-3217001239 , Switch Part No.-3217001240 , Palm Grip Part No.-3217001241 , Switch Part No.-3217001242 , Switch Part No.-3217001243 , Switch Part No.-3217001245 , Lampswitch Part No.-3217001247 , Lamp Switch Part No.-3217001250 , Switch Part No.-3217001257 , Push Button Part No.-3217001258 , Mushroom Pus Part No.-3217001259 , Lampvred Part No.-3217001261 , Lamp Push Bu Part No.-3217001262 , Mushroom Pus Part No.-3217001283 , Holder Part No.-3217034700 , Key Part No.-3217144600 , Bushing Part No.-3217301600 , Schackel Part No.-3217312400 , Hyd.Cylinder Part No.-3217327910 , Handle Part No.-3217383900 , Holder Part No.-3217384180 , Chain Part No.-3217385000 , Stödring Part No.-3217390908 , Kil Part No.-3217390909 , Snäckhjul Part No.-3217390910 , Skiva Part No.-3217390911 , Fjäder Part No.-3217390912 , Hållare Part No.-3217390913 , Mutter Part No.-3217390914 , Oil Plug Part No.-3217390919 , Bushing Part No.-3217390921 , Key Part No.-3217390922 , Seal Ring Part No.-3217390923 , Snäckhjulsaxel Part No.-3217390925 , Cover Part No.-3217390929 , Seal.Ring Part No.-3217390930 , Cover Part No.-3217390934 , Sealing Part No.-6060000247 , Gear Housing Part No.-3217390980 , Sealing Set Part No.-3217390982 , Friction Kit Part No.-3217390983 , Stand Frame Part No.-3217390984 , Bearing Kit Part No.-6060006027 , Seal Ring Part No.-3217391024 , Seal Ring Part No.-3217391035 , Insul Ring Part No.-3217391205 , Insulating Ring Part No.-3217391206 , Insul Ring Part No.-3217391214 , Bygel Part No.-3217391253 , Flange Part No.-3217391254 , Insu.Bracket Part No.-3217391255 , Hydr. Unit Part No.-3217391381 , Support Part No.-3217392101 , Back-Up Ring Part No.-3217929617 , Nut Part No.-3217392109 , Tube Part No.-3217392111 , Pipe Part No.-3217392113 , Swivel Part No.-3217392180 , Gear Housing Part No.-3217492600 , Cover Part No.-3217492601 , Seal Ring Part No.-3217492602 , Frict.Disc Part No.-3217492607 , Support Ring Part No.-3217492608 , Worm Wheel Part No.-3217492610 , Frict.Disc Part No.-3217492611 , Spring Part No.-3217492612 , Worm Shaft Part No.-3217492625 , Rear Cover Part No.-3217492634 , Seal Ring Part No.-3217492635 , Emerg.Valve Part No.-3217552780 , Protect. Shield Part No.-3217559704 , Wheel Part No.-3217559801 , Wheel Part No.-3217559802 , Wheel Part No.-3217559804 , Drum Part No.-3217559880 , Flange Part No.-3217559901 , Attachment Part No.-3217560207 , Brush Holder Part No.-3217560232 , Breaker Part No.-3217560237 , Gasket Part No.-3217560800 , U-Bolt Part No.-3217562000 , Gasket Part No.-3217564000 , Attachment Part No.-3217597700 , Vibr.Damper Part No.-3217604701 , Vibr.Damper Part No.-3217604702 , Nipple Part No.-3217614800 , Adapter Part No.-3217620500 , Nipple Part No.-3217621800 , Inner Tube Part No.-3217624647 , Lock Sheet Part No.-3217635900 , Angle Bracket Part No.-3217650801 , Restriction Part No.-3217651201 , Resctriction Part No.-3217651203 , Restriction Part No.-3217651301 , Restriction Part No.-3217651302 , Restriction Part No.-3217651303 , Control Box Part No.-3217651478 , Pipe Part No.-3217661300 , Axel Part No.-3217681400 , Screw Part No.-3217699300 , Oilreservoir Part No.-3217740300 , Cover Part No.-3217740301 , Compl Oilres Part No.-3217740380 , Slangnippel Part No.-3217747110 , Air Oil Cool Part No.-3217751103 , Air Oil Cool Part No.-3217751111 , Oil Cooler Part No.-3217751127 , A-W.Cooler Part No.-3217751143 , Air Oil Cool Part No.-3217751147 , Air Oil Cool Part No.-3217751152 , Air Oil Cool Part No.-3217751160 , Thermostat Part No.-3217751165 , Air Oil Cool Part No.-3217751176 , Fan Part No.-3217751179 , Fan Part No.-3217751181 , Slangnippel Part No.-3217759210 , Pin Part No.-3217763200 , Cover Part No.-3217763400 , Chuck Part No.-3217763480 , Nylon Pipe Part No.-3217781900 , Direction Va Part No.-3217786404 , Magnet Part No.-3217786454 , Tatningssats Part No.-3217786455 , Plate Part No.-3217786600 , Flange Part No.-3217791400 , Thermostat Part No.-3217799201 , Thermostat Part No.-3217799202 , Protect. Cap Part No.-3217799210 , Thermostat Part No.-3217799281 , Thermostat Part No.-3217799282 , Sequen.Valve Part No.-3217801401 , Sequen.Valve Part No.-3217801402 , Sequen.Valve Part No.-3217801403 , Nippel Part No.-3217804930 , Press.Rel.Ca Part No.-3217807652 , Flow Divider Part No.-3217815302 , Cartridge Part No.-3217815303 , Seal Kit Part No.-3217815304 , Conden. Unit Part No.-3217820226 , Pin Insert Part No.-3217826600 , Sleeve Ins. Part No.-3217826700 , Pin Insert Part No.-3217826800 , Socket Inser Part No.-3217826900 , Pin Part No.-3217827700 , Pin Part No.-3217827702 , Guide Sleeve Part No.-3217827710 , Guide Pin Part No.-3217827711 , Socket Part No.-3217827800 , Reducer Part No.-3217836200 , Pin Insert Part No.-3217839900 , Insert Part No.-3217840000 , Frame Part No.-3217840200 , Sleeve Part No.-3217840300 , Watermistset Part No.-3217847101 , Direct.Valve Part No.-3217848301 , Seal Kit Part No.-3217848303 , Cover Part No.-3217852404 , Hydraulic Pu Part No.-3217852500 , Shaft Coupl. Part No.-3217852501 , Interm. Ring Part No.-3217852502 , Shaft Coupli Part No.-3217852503 , Axelkoppling Part No.-3217852504 , Hydraulic Pu Part No.-3217852520 , Shaft Coupli Part No.-3217852522 , Pilot Valve Part No.-3217852524 , Seal Part No.-3217852526 , Circlip Part No.-3217852532 , Pipe Part No.-3217852900 , Thermostat Part No.-3217855800 , Pilot Valve Part No.-3217860092 , Gauge Hose Part No.-3217863800 , Gauge Hose Part No.-3217863801 , Gauge Hose Part No.-3217863802 , Adapter Part No.-3217863803 , Gauge Set Part No.-3217863852 , Check Valve Part No.-3217864301 , Valve Plate Part No.-3217866100 , Lubricat.Pump Part No.-3217866752 , Sil Part No.-3217867400 , Indicat.Lamp Part No.-3217869910 , Hydr.Pump Part No.-3217876200 , Splin.Sleeve Part No.-3217876201 , Shaft Coupl. Part No.-3217876203 , Shaft Coupli Part No.-3217876204 , Hydraulic Pump Part No.-3217876200 , Actuator Part No.-3217876242 , Heater Eleme Part No.-3217881600 , Seal Part No.-3217882221 , Hydraulic Pu Part No.-3217882236 , Hydraulic Pu Part No.-3217882237 , Hydr. Pump Part No.-3217882350 , Hydraulic Pump Part No.-3217955416 , Seal Part No.-3217882329 , Gear Pump Part No.-3217882350 , Seal Kit Part No.-3217882351 , Hydraulpump Part No.-3217882355 , Control Panel Part No.-3217883520 , Control Pane Part No.-3217883538 , Control Pane Part No.-3217883556 , Strypventil Part No.-3217884005 , Choke Screw Part No.-3217884008 , Distrb.Pipe Part No.-3217884051 , Needle Valve Part No.-3217884100 , Direct.Valve Part No.-3217886000 , Direct.Valve Part No.-3217886001 , Spare Part S Part No.-3218200866 , Connect. Pla Part No.-3217886011 , Check Valve Part No.-3217886100 , Dir. Valve Part No.-3217886211 , Coil Part No.-3217886212 , Solenoid Val Part No.-3217886213 , Attachment Part No.-3217886900 , Hatch Part No.-3217887037 , Panel Frame Part No.-3217887040 , Valve Block Part No.-3217887129 , Lever Part No.-3217887148 , Attachment Part No.-3217887150 , Valve Block Part No.-3217893701 , Valve Block Part No.-3217893701 , Seal Kit Part No.-3217893711 , Pr.Reg.Cartr Part No.-3217893713 , Valve Block Part No.-3217893720 , O-Ring Part No.-3217893721 , Restriction Part No.-3217893723 , Seqencse Val Part No.-3217893732 , Valve Part No.-3217893740 , Valve Block Part No.-3217893750 , Check Valve Part No.-3217894301 , Check Valve Part No.-3217894302 , Pr.Rel.Valve Part No.-3217894500 , Pr.Rel.Valve Part No.-3217894510 , Seal Kit Part No.-3217894512 , Seal Kit Part No.-3217894513 , Rattsats Part No.-3217894514 , Pilot Op.Checkv Part No.-3217894515 , Lever Part No.-3217894610 , Plate Part No.-3217895100 , Plate Part No.-3217895101 , Plate Part No.-3217895105 , Plate Part No.-3217895110 , Plate Part No.-3217895111 , Plate Part No.-3217895113 , Plate Part No.-3217895120 , Plate Part No.-3217895130 , Plate Part No.-3217895147 , Control Pane Part No.-3217895790 , Hydraulic Se Part No.-3217896407 , Pipe Part No.-3217896620 , Valve Block Part No.-3217896800 , Valve Block Part No.-3217896810 , Valve Block Part No.-3217896820 , Cut Hole Set Part No.-3217896940 , Press.Rel.Va Part No.-3217900209 , Level Meter Part No.-3217900800 , Sequence Val Part No.-3217901902 , Pr.Rel.Valve Part No.-3217902302 , Sealing Set Part No.-3217902692 , Box Part No.-3217903301 , Box Part No.-3217903302 , Gasket Part No.-3217903303 , Attachment Part No.-3217903304 , Bar Part No.-3217903305 , Pipe Part No.-3217903306 , Förbindning Part No.-3217903308 , Stöd Part No.-3217903309 , Rod Part No.-3217903310 , Flange Part No.-5112316209 , Insulator Part No.-3217903324 , Hydr.Motor Part No.-3217903420 , Safety Valve Part No.-3217903602 , Safety Valve Part No.-3217903603 , Safety Valve Part No.-3217903604 , Safety Valve Part No.-3217903605 , O-Ring Part No.-3217903809 , Connection P Part No.-3217906002 , Connection P Part No.-3217906003 , Connection P Part No.-3217906006 , Connect.Plat Part No.-3217906012 , Connect Plat Part No.-3217906014 , Connect. Plate Part No.-3217906019 , Seal Kit Part No.-3217907315 , Double Check Part No.-3217907500 , Pr.Rel.Valve Part No.-3217908205 , Press.Rel.Valve Part No.-3217908207 , Overcent.Val Part No.-3217908208 , Pr.Rel.Valve Part No.-3217908217 , Lock Plate Part No.-3217909600 , Water Pump S Part No.-3217916920 , Shaft Seal Part No.-3217917401 , Pump Unit Part No.-3217917406 , O-Ring Set Part No.-3217917407 , Pump Unit Part No.-3217917408 , Pump Unit Part No.-3217917409 , O-Ring Kit Part No.-3217917412 , Water Pump S Part No.-3217917510 , Water Pump S Part No.-3217917520 , Seal Kit Part No.-3217919105 , Water Pump Part No.-3217919106 , Axeltätning Part No.-3217919201 , Water Pump U Part No.-3217919250 , Regulator Part No.-3217919301 , Valve Part No.-3217919302 , Regulator Part No.-3217919303 , Regulator Part No.-3217919304 , Regulator Part No.-3217919307 , Water Pump U Part No.-3217919550 , Lighting Part No.-3217919600 , O-Ring Part No.-3217920039 , Pump Unit Part No.-3217920311 , Piston Part No.-3217920312 , Piston Guide Part No.-3217920313 , Piston Part No.-3217920314 , Shaft Part No.-3217920318 , Washer Part No.-3217920321 , Washer Part No.-3217920322 , Spring Part No.-3217920323 , Roll.Bearing Part No.-3217920325 , Roll.Bearing Part No.-3217920326 , Bearing Plate Part No.-3217920327 , Plug Part No.-3217920358 , Seal Kit Part No.-3217920382 , Control Plat Part No.-3217920394 , Roll.Bearing Part No.-3217920425 , Roll.Bearing Part No.-3217920426 , Seal Part No.-3217920444 , Pump Part No.-3217920604 , Pump Unit Part No.-3217920611 , Reg Piston Part No.-3217920612 , Piston Part No.-3217920614 , Pump Housing Part No.-3217920615 , Shaft Part No.-3217920618 , Washer Part No.-3217920622 , Spring Part No.-3217920623 , Bearing Part No.-3217920625 , Bearing Part No.-3217920626 , Bear.Plate Part No.-3217920627 , O-Ring Part No.-3217920630 , Cradle Part No.-3217920648 , Seal Part No.-3217920649 , Lock Ring Part No.-3217920650 , Distribut.Pl Part No.-2651789600 , Seal Kit Part No.-3217920682 , Water Pump S Part No.-3217925510 , Water Pump Part No.-3217925550 , O-Ring Set Part No.-3217925606 , Coupling Part No.-3217925950 , Coupling Part No.-3217925951 , Polyam.Hose Part No.-3217927300 , Socketoutlet Part No.-3217927411 , Voltmeter Part No.-3217927732 , Voltmeter Part No.-3217927739 , Ampere Meter Part No.-3217927825 , Hyd.Cylinder Part No.-3217928300 , Släpring Part No.-3217929401 , Släpring Part No.-3217929402 , Gasket Part No.-3217929404 , Limit Switch Part No.-3217929462 , Granslagesbr Part No.-3217929463 , Collector Part No.-3217929480 , Collector Part No.-3217929481 , Collector Part No.-3217929482 , Collector Kit Part No.-3217929483 , Collector Part No.-3217929484 , Collector Part No.-3217929486 , Commutator Part No.-3217929488 , Gasket Part No.-3217929503 , Slipring Part No.-3217929506 , Brush Hold. Part No.-3217929515 , Cable Terminal Part No.-3217929524 , Cover Plate Part No.-3217929525 , Cable Terminal Part No.-3217929526 , Pilot Ring Part No.-3217929528 , Brush/Insul. Part No.-3217929559 , Earth Ring Kit Part No.-3217929562 , Phase Rings Kit Part No.-3217929563 , Limit Switch Part No.-3217929565 , Belt Part No.-3217929566 , Commutator Part No.-3217929585 , Bushing Part No.-3217929617 , Outlet Part No.-3217929618 , O-Ring Part No.-3217929619 , Timing Relay Part No.-3176003528 , Time Relay Part No.-3217929908 , Motorprotect Part No.-3217931153 , Cirk.Breaker Part No.-3217931155 , Circ.Breaker Part No.-3217931158 , Circ.Breaker Part No.-3217931159 , Circ.Breaker Part No.-3217931160 , Circ.Breaker Part No.-3217931161 , Circ.Breaker Part No.-3217931162 , Circ.Breaker Part No.-3217931164 , Cir.Breaker Part No.-3217931165 , Motor Protec Part No.-3217931166 , Circuit Brea Part No.-3217931167 , Aux. Contacts Part No.-3217931170 , Circ.Breaker Part No.-3217931180 , Nozzle Part No.-3217931611 , Lock Washer Part No.-3217931614 , Trigger Part No.-3217931618 , Gas Cartridge Part No.-3217931619 , Check Valve Part No.-3217931624 , Seal Part No.-3218200830 , Attachment Part No.-3217931628 , Branch Block Part No.-3217931630 , Tank Part No.-3217931641 , Attachment Part No.-3217931642 , Attachment Part No.-3217931644 , Shaft Seal Part No.-3217933303 , Valve Part No.-3217933721 , Block Part No.-3217933722 , Valve Part No.-3217933900 , Coil Part No.-3217933901 , Pr.Red.Valve Part No.-3217934140 , Pr.Red.Valve Part No.-3217934160 , Munstycke Part No.-3217939001 , Sealing List Part No.-3217939800 , Welded Hinge Part No.-3217944020 , Electr.Motor Part No.-3217945805 , El-Motor Part No.-3217946709 , Retainer Part No.-3217946804 , Shaft Part No.-3217946811 , Fan Part No.-3217946812 , Bearing Part No.-3217946819 , Reservoir Part No.-3217946824 , Press.Guard Part No.-3217946825 , Transformator Part No.-3217951202 , Transformer Part No.-3217951210 , Transformator Part No.-3217951218 , Transformer Part No.-3217951235 , Gasket Part No.-3217953009 , Gasket Part No.-3217953011 , Hydr.Motor Part No.-3217953500 , Sealing Set Part No.-3217953501 , Flange Part No.-3217953502 , Rod Part No.-3217953602 , Ball Ring Part No.-3217953606 , Bushing Part No.-3217953607 , Gear Wheel Part No.-3217953609 , Driver Part No.-3217953610 , Driver Part No.-3217953614 , Gear Wheel Part No.-3217953615 , Micro Switch Part No.-3217953621 , Flange Part No.-3217953625 , Hydr.Pump Part No.-3217955335 , Hyd.Pump Part No.-3217955366 , Flange Part No.-3217955402 , Hydraulic Pu Part No.-3217955410 , Gear Pump Part No.-3217955411 , Gear Pump Part No.-3217955413 , Gear Pump Part No.-3217955415 , Gear Pump Part No.-3217955417 , Gear Pump Part No.-3217955418 , Seal Kit Part No.-3217955422 , El-Motor Part No.-3217956104 , El-Motor Part No.-3217956105 , Electric Motor Part No.-3217956106 , El. Motor Part No.-3217956405 , El. Motor Part No.-3217956406 , Slangledning Part No.-3217957810 , Slangledning Part No.-3217957811 , Hyd. Hose Part No.-3217957825 , Valve House Part No.-3217958001 , Seal Washer Part No.-3217958081 , Valve Block Part No.-3217958150 , Valve Part No.-3217958151 , Valve Part No.-3217958155 , Spare Part S Part No.-3217958162 , Spare Part S Part No.-3217958164 , Valve Part No.-3217958165 , Relä Part No.-3217958301 , Relay Part No.-3217958303 , Relay Part No.-3217958304 , Dir. Valve Part No.-3217958420 , Valve Block Part No.-3217958440 , Valve Block Part No.-3217958442 , Restriction Part No.-3217958443 , Restriction Part No.-3217958444 , Attachment Part No.-3217958812 , Control Arm Part No.-3217958813 , Bearing Bush Part No.-3217958814 , Control Arm Part No.-3217958823 , Retaining Ri Part No.-3217958828 , Terminal Part No.-3217959210 , Pump Part No.-3217962220 , Sealing Set Part No.-3217962221 , Repair Kit Part No.-3217962222 , Sealing Set Part No.-3217962224 , Piston Set Part No.-3217962226 , Volyme.Cir.R Part No.-3217962901 , Regulator Part No.-3217962902 , Transformer Part No.-3217965510 , Transformator Part No.-3217965521 , Transformer Part No.-3217965522 , Transformator Part No.-3217965605 , Transformer Part No.-3217965607 , Transformer Part No.-3217965615 , Transformer Part No.-3217965616 , Hour Meter Part No.-3217965801 , Hour Meter Part No.-3217965802 , Earthfaultre Part No.-3217966602 , Residual Cur Part No.-3217966606 , Earthfaultre Part No.-3217966613 , Thermostat Part No.-3217969302 , Heater Eleme Part No.-3217969307 , M.Circ Break Part No.-3217969709 , Press.Switch Part No.-3217970403 , Ph.Seq.Relay Part No.-3217970803 , Relay Part No.-3217970805 , Fasföljdsvakt Part No.-3217970806 , Flow Meter Part No.-3217971230 , Valve House Part No.-3217971250 , Coupling Part No.-3217971801 , Cardan Shaft Part No.-3217971901 , Wiper Motor Part No.-3217973102 , Wiper Motor Part No.-3217973106 , Crank Shaft Part No.-3217973107 , Link Screw Part No.-3217973113 , Link Screw Part No.-3217973114 , Link Screw Part No.-3217973115 , Link Rod Part No.-3217973116 , Connector Part No.-3217973121 , Connector Part No.-3217973123 , Flat Pin Part No.-3217973124 , Crank Shaft Part No.-3217973131 , Bearing Part No.-3217973132 , Bearing Part No.-3217973133 , Link Screw Part No.-3217973135 , Bearing Part No.-3217973146 , Bearing Part No.-3217973147 , Crank Shaft Part No.-3217973148 , Crank Shaft Part No.-3217973150 , Crank Shaft Part No.-3217973151 , Link Rod Part No.-3217973152 , Link Rod Part No.-3217973154 , Link Rod Part No.-3217973155 , Wiper Motor Part No.-3217973161 , Crank Shaft Part No.-3217973163 , Parallel Arm Part No.-3217973200 , Parallel Arm Part No.-3217973203 , Paralell Arm Part No.-3217973208 , Parallel Arm Part No.-3217973210 , Parallel Arm Part No.-3217973215 , Wiper Blade Part No.-3217973300 , Wiper Blade Part No.-3217973303 , Wiper Blade Part No.-3217973304 , Wiper Blade Part No.-3217973305 , Wiper Blade Part No.-3217973307 , Wiper Blade Part No.-3217973315 , Windscr.Wash Part No.-3217973500 , Check Valve Part No.-3217973502 , Windscr. Was Part No.-3217973505 , Clamp Part No.-3217973507 , Clipsnut Part No.-3217973566 , Cover Part No.-3217976603 , Bushing Part No.-3217976609 , Swivel Part No.-3217976610 , Lubric.Hose Part No.-3217976611 , Valve Part No.-3217976612 , Valve Part No.-3217976613 , Valve Part No.-3217976614 , Cover Part No.-3217976616 , Flow Cont.Valve Part No.-3217977300 , Seal Kit Part No.-3217977319 , Knob Part No.-3217977808 , Munstycke Part No.-3217977812 , Air Nozzle Part No.-3217977818 , Jalouise Part No.-3217977819 , Hose Reel Part No.-3217978302 , Regulator Part No.-3217978401 , Relä Part No.-3217978753 , Tidrelä Part No.-3217978851 , Transformator Part No.-3217978903 , Strålkastare Part No.-3217979861 , Glass Part No.-3217979865 , Bygel Part No.-3217979922 , Bygel Part No.-3217979923 , Check Valve Part No.-3217980120 , Check Valve Part No.-3217980122 , Display Part No.-3217980913 , Inner Light Part No.-3217982301 , Direct.Valve Part No.-3217983400 , Dragstångssats Part No.-3217983401 , Inlet Section Part No.-3217983405 , Seal Kit Part No.-3217983407 , Sealing Set Part No.-3217983409 , Control Set Part No.-3217983410 , Holder Part No.-3217983411 , Seal Kit Part No.-3217983412 , Cover Part No.-3217983413 , Backventil Part No.-3217983414 , Holder Part No.-3217983415 , Screw Part No.-3217983417 , Pinnbult Part No.-3217983418 , Centering Set Part No.-3217983420 , Barrier Part No.-3217983421 , Lever Set Part No.-3217983422 , Lever Holder Part No.-3217983423 , Pin Part No.-3217983424 , Circlip Part No.-3217983425 , Oring Part No.-3217983427 , O-Ring Part No.-3217983428 , Interm.Part Part No.-3217983430 , Lever Set Part No.-3217983433 , Lever Joint Part No.-3217983434 , Control Set Part No.-3217983435 , Lever Set Part No.-3217983436 , Pr.Rel.Valve Part No.-3217983438 , Centreringssats Part No.-3217983439 , Interm.Part Part No.-3217983440 , Control Set Part No.-3217983445 , Seal Kit Part No.-3217983446 , Catch Part No.-3217983447 , Pr.Rel.Valve Part No.-3217983448 , Pr.Rel.Valve Part No.-3217983449 , Direction Va Part No.-3217983460 , Valve Sectio Part No.-3217983468 , Valve Sectio Part No.-3217983469 , Valve Section Part No.-3217983478 , Pull Rod Set Part No.-3217983480 , Länk Part No.-3217983483 , Låsmutter Part No.-3217983484 , Screw Part No.-3217983486 , Dragstångssats Part No.-3217983490 , Control Set Part No.-3217983492 , Control Set Part No.-3217983493 , Control Set Part No.-3217983495 , Pilot Operat Part No.-3217983499 , Switch Part No.-3217983702 , Switch Part No.-3217983707 , Switch Part No.-3217983715 , Strömställare Part No.-3217984111 , Strömställare Part No.-3217984112 , Valve Part No.-3217984800 , Cont.Block Part No.-3217985800 , Fan Part No.-3217986510 , Fuseholder Part No.-3217986701 , Flash. Relay Part No.-3217987100 , Earthf.Relay Part No.-3217987302 , Flange Part No.-3217987615 , Box Casing Part No.-3217988001 , Box Casing Part No.-3217988002 , Gasket Part No.-3217988003 , Slip Ring Part No.-3217988004 , Brush Holder Part No.-3217988005 , Pipe Part No.-3217988006 , Slip Ring Part No.-3217988040 , Limit Switch Part No.-3217988050 , Limit Switch Part No.-3217988061 , Collector Part No.-3217988080 , Commutator Part No.-3217988081 , Collektor Part No.-3217988083 , Drain.Block Part No.-3217988100 , Branch Block Part No.-3217988110 , Valve Plug Part No.-3217988204 , Valve Plug Part No.-3217988205 , Valve Plug Part No.-3217988206 , Valveplug Part No.-3217988208 , Valve Plug Part No.-3217988209 , Valve Plug Part No.-3217988210 , Signal Cable Part No.-3217988211 , Cable Complete Part No.-3217988214 , Cable Complete Part No.-3217988216 , Cable Complete Part No.-3217988218 , Valve Plug Part No.-3217988222 , Valve Plug Part No.-3217988223 , Contact Part No.-3217988226 , Valve Plug Part No.-3217988245 , Valve Plug Part No.-3217988246 , Timing Relay Part No.-3217989304 , Transient Pr Part No.-3217989602 , Transient Pr Part No.-3217989603 , Diode Unit Part No.-3217989700 , Diode Unit Part No.-3217989701 , Aux. Contact Part No.-3217990337 , Overload Relay / Lrd365 48-65A Part No.-3217990495 , Overload Relay / Lrd365 48-65A Part No.-3217990496 , Overload Relay Part No.-3217990497 , Guide Light Part No.-3217995201 , Voltage Stab Part No.-3217995202 , Converter Part No.-3217995209 , Laser Part No.-3217995212 , Laser Unit Part No.-3217995213 , Junct. Box Part No.-3217995214 , Flow Guard Part No.-3217995500 , Flow Guard Part No.-3217995510 , Laser Unit Part No.-3217995523 , Laser Part No.-3217995524 , Flödesvakt Part No.-3217995530 , Flow Guard Part No.-3217995540 , Sensor Part No.-3217995550 , Pr.Red.Valve Part No.-3217996301 , Pr.Reg.Valve Part No.-3217996302 , Sealing Set Part No.-3217996304 , Press.Red.Valve Part No.-3217996321 , Press.Red.Valve Part No.-3217996322 , Steering Set Part No.-3217996323 , Pr.Reg.Valve Part No.-3217996341 , Valve Part No.-3217996342 , Pr.Rel.Valve Part No.-3217996421 , Pr.Rel.Valve Part No.-3217996431 , Press.Rel.Va Part No.-3217996432 , Overc.Valve Part No.-3217996461 , Overc.Valve Part No.-3217996486 , Flow Regul. Part No.-3217996501 , Elmotor Part No.-3217996911 , Electric Motor Part No.-3217996931 , Electric Mot Part No.-3217996940 , Protec.Cover Part No.-3217996991 , El-Motor Part No.-3217997011 , Electric Mot Part No.-3217997013 , Motor Part No.-3217997014 , El-Motor Part No.-3217997019 , Elect. Motor Part No.-3217997022 , Electric Mot Part No.-3217997023 , Electric Mot Part No.-3217997024 , Electric Mot Part No.-3217997040 , Electric Mot Part No.-3217997041 , Electric Mot Part No.-3217997047 , Electric Mot Part No.-3217997055 , Glass Part No.-3217997621 , Socketoutlet Part No.-3217997810 , Insulator Part No.-3217997813 , Sleeve Part No.-3217997814 , Cable Holder Part No.-3217997815 , Sleeve Part No.-3217997816 , Plug Connector Part No.-3217997820 , Insulator Part No.-3217997824 , Pin Part No.-3217997825 , Pin Part No.-3217997827 , Instrument Part No.-3217997838 , Connector Pl Part No.-3217997845 , Volt Meter Part No.-3217997847 , Socket Outle Part No.-3217997852 , Socketoutlet Part No.-3217997853 , Circuit Brea Part No.-3217997856 , Sleeve Part No.-3217997867 , Sleeve Part No.-3217997869 , Sleeve Part No.-3217997870 , Sleeve Part No.-3217997871 , Sleeve Part No.-3217997875 , Sleeve Part No.-3217997876 , Sleeve Part No.-3217997877 , Insulator Part No.-3217997890 , Insulator Part No.-3217997891 , Sleeve Part No.-3217997894 , Sleeve Part No.-3217997895 , Pin Part No.-3217997896 , Sleeve Part No.-3217997897 , Direct.Valve Part No.-3217998510 , Attachment Part No.-3217998700 , Switching Ge Part No.-3217998923 , Flange Part No.-3217998941 , Switch.Gear Part No.-3217999000 , Solenoid Val Part No.-3217999400 , Solenoid Val Part No.-3217999709 , Solenoid Valve Part No.-3217999720 , Coil Part No.-3217999721 , Spare Parts Part No.-3217999722 , Hydr.Pump Part No.-3217999900 , Bushing Part No.-3218200651 , Socket Part No.-3218200658 , Bellows Coup Part No.-3218200670 , Guide Part No.-3218200674 , Nut Part No.-3218200677 , Circlip Part No.-3218200685 , Seal Kit Part No.-3218200686 , Piston Part No.-3218200692 , Seal Kit Part No.-3218200693 , Piston Rod Part No.-3218200694 , Direction Va Part No.-3218200698 , Spring Pin Part No.-3218200712 , Lock Screw Part No.-3218200713 , Solenoid Part No.-3218200719 , Contact Part No.-3218200720 , Repair Kit Part No.-3218200726 , Cover Part No.-3218200746 , Cover Part No.-3218200749 , Swivel Kit Part No.-3218200753 , Screw Part No.-3218200760 , Shaftseal K Part No.-3218200762 , Mobile Spray Part No.-5590026447 , Seal Kit Part No.-3218200785 , Actuator Part No.-6060002167 , Seal Kit Part No.-3217920682 , Bearing Part No.-3217920625 , Bearing Part No.-3217920626 , Tank Part No.-3218200828 , Actuator Part No.-3218200829 , Seal Part No.-3218200831 , Heating Fan Part No.-3176006165 , Motorprotect Part No.-3218200946 , El.Ang.Grind Part No.-3219000319 , Flow Meter Part No.-3219000327 , Drill Mach. Part No.-3219000330 , Plate Part No.-3222003203 , Filt.Indicator Part No.-3222137500 , Induct. Sens Part No.-3222148809 , Rotor Part No.-3222182425 , Cam Part No.-3222182430 , Bearing Part No.-3222182453 , Bearing Part No.-3222182454 , Shaft Part No.-3222182470 , Hydraulic Motor Part No.-3222182480 , Seal Kit Part No.-3222182490 , Seal Kit Part No.-3222182491 , Main Cartridge Part No.-3222188161 , Filter Set Part No.-3222188162 , Cover Part No.-3222188163 , Safety Cartr. Part No.-3222188164 , Air Filter Part No.-3222188169 , Dust Guard Part No.-3222188199 , Sprocket Wheel Part No.-3222193800 , Lamp Holder Part No.-3222277800 , Lamp Calotte Part No.-3222277801 , Piston Part No.-3222290030 , Valve Cover Part No.-3222290134 , Disk Brake Part No.-3222290136 , Screw Part No.-3222290160 , Brake Housing Part No.-3222290163 , O-Ring Part No.-3222290165 , Circlip Part No.-3222290167 , Ball Part No.-3222290168 , Brake Disc Kit Part No.-3222290169 , Protection Hose Part No.-3222300977 , Relay Socket Part No.-3222301249 , Seal Kit Part No.-3222302648 , Washer Part No.-3222303434 , Shaft Part No.-3222303436 , O-Ring Part No.-3222303444 , Bearing Support Part No.-3222303446 , Shims Set Part No.-3222303448 , Ring Part No.-3222303449 , Ring Part No.-3222303450 , Support Part No.-3222303452 , Screw Part No.-3222303461 , Spring Part No.-3222303464 , Ground Braid Part No.-3222304820 , Ground Braid Part No.-3222304877 , Ground Braid Part No.-3222304880 , Seal Kit Part No.-3222304937 , Protection Hose Part No.-3222305615 , Seal Kit Part No.-3222305858 , Relief Cartr Part No.-3222306266 , Valve Block Part No.-3222307546 , Seal Kit Part No.-3222308135 , Eccenter Lat Part No.-3222308355 , Clamp Part No.-3222308485 , Bridge Conn. Part No.-3222308813 , Cradle Part No.-3222309643 , Rope Tension Part No.-3222309750 , Nipple Part No.-3222310440 , Solenoid Part No.-3222310610 , Piston Rod E Part No.-3222311363 , Hand Pump Part No.-3222311521 , Solenoid Cartr. Part No.-3222311765 , Angle Sensor Part No.-3222311967 , Angle Sensor Part No.-3222311970 , Cradle Part No.-3222312641 , Seal Kit Part No.-3222312935 , Air Nozzle Part No.-3222313213 , Spacer Part No.-3222313742 , Sealing Set Part No.-3222313971 , Voltage Convert Part No.-3222314120 , Solenoid Cartr. Part No.-3222314365 , Contact Housing Part No.-3222314501 , Sealing Plug Part No.-3222314504 , Contact Hous Part No.-3222314508 , Contact Hous Part No.-3222314522 , Contact Hous Part No.-3222314525 , Sensor Cable Part No.-3222314717 , Marking Sleeve Part No.-3222314778 , Joystick Part No.-3222314998 , Contact Housing Part No.-3222315832 , Blind Plug Part No.-3222315855 , Seal Kit Part No.-3222316810 , Piston Part No.-3222316812 , Skylt Part No.-3222316852 , Piston Rod Part No.-3222317340 , Pilot Piston Part No.-3222317628 , Radiator Uni Part No.-3222317890 , Flow Cont.Va Part No.-3222318276 , Seal Kit Part No.-3222318572 , Seal Kit Part No.-6060013534 , Hydraulic Pi Part No.-3222318598 , Piston Rod Part No.-3222318604 , Grommet Part No.-3222318636 , Wiper Blade Part No.-3222986201 , Piston Part No.-3222319241 , Hose Clip Part No.-3222320105 , Pulley Wheel Part No.-3222320802 , Plate Part No.-3222324160 , Valve Block Part No.-3222324184 , Welded Hinge Part No.-3222324291 , Hose Clip Part No.-3222324418 , Cradle Part No.-3222326081 , End Socket Part No.-3222326102 , Damper Part No.-3222326258 , Cover Part No.-3222326458 , Piston Part No.-3222326459 , Nut Part No.-3222326460 , Valve Part No.-3222326490 , Valve Part No.-3222326491 , Seal Kit Part No.-3222326495 , Tie Rod Kit Part No.-3222326496 , Nut Set Part No.-3222326497 , Lever Holder Part No.-3222326498 , Actuator Part No.-3222326499 , Spring Part No.-6060010283 , Seal Kit Part No.-3222326676 , Flow Regulator Part No.-3222326677 , Steering Wh.Set Part No.-3222326678 , Double Ch.Valve Part No.-3222326896 , Bearing Part No.-0501002000 , Seal Kit Part No.-3222327687 , Valve Part No.-3222327696 , Handle Part No.-3222328696 , Compensator Part No.-3222330265 , Seal Kit Part No.-3222330822 , Coil Part No.-3222331129 , Silencer Part No.-3222331266 , Oil Cooler Part No.-3222331398 , Oil Cooler Part No.-3222331402 , Lock Screw Part No.-3222332352 , Compensator Part No.-3222334137 , Connector Part No.-3222342199 , Term Lock Part No.-3222342201 , Flash Light Part No.-3222345582 , Cap Part No.-3310407600 , Regulator Part No.-3312292400 , Lock Washer Part No.-3315019502 , Lock Washer Part No.-3315019504 , Lock Washer Part No.-3315019508 , Låsbricka Part No.-3315019510 , Quick Coupli Part No.-3315167303 , Coupling Qui Part No.-3315167305 , Coupling Qui Part No.-3315167307 , Coupling Qui Part No.-3315167309 , Plug Part No.-3455040002 , Plug Part No.-3455040004 , Plug Part No.-3455040006 , Nipple Part No.-3455040201 , Nipple Part No.-3455040202 , Nipple Part No.-3455040204 , Nipple Part No.-3455040205 , Nipple Part No.-3455040206 , Nipple Part No.-3455040207 , Nipple Part No.-3455040208 , Nipple Part No.-3455040213 , Bushing Part No.-3455045705 , Bushing Part No.-3455045711 , Nipple Part No.-3455054301 , Nipple Part No.-3455054302 , Nipple Part No.-3455054303 , Nipple Part No.-3455054304 , Nipple Part No.-3455054306 , Nipple Part No.-3455054307 , Nipple Part No.-3455054308 , Hexagon Nipple Part No.-3455065103 , Nipple Part No.-3455076601 , Nipple Part No.-3455076602 , Nipple Part No.-3455076603 , Nipple Part No.-3455076605 , Nipple Part No.-3455076606 , Nipple Part No.-3455076607 , Nipple Part No.-3455076609 , Nippel Part No.-3715058100 , Elbow Nipple Part No.-3715058400 , Nippel Part No.-3715058500 , Nipple Part No.-3715058700 , Nipple Part No.-3715058800 , Elbow Part No.-3715058900 , Plug Part No.-3715059800 , Plug Part No.-3715059900 , Plug Part No.-3715060000 , Cap Part No.-3715081900 , Cap Part No.-3715082000 , Plug Part No.-3715082100 , Rubbsocket Part No.-3715088903 , Bolt Set Part No.-3715088990 , Adapter Sleeve Part No.-3715150500 , Adapt.Sleeve Part No.-3715302000 , Adapter Sleeve Part No.-3715302100 , Adapter Sleeve Part No.-3715303000 , Spool Part No.-3715313800 , Nippel Part No.-3715634400 , Seal Part No.-3715827200 , Cylinder Part No.-3716016800 , Relief Valve Part No.-3716018602 , Hyd.Cylinder Part No.-3980138780 , Pot.Holder Part No.-3980197900 , O-Ring Part No.-4090031300 , Hex Sock. Screw Part No.-4090063000 , Connector Part No.-4142404500 , Plast,Stållina Part No.-4310046400 , Press Sleeve Part No.-4330101600 , Planet Carr. Part No.-4350172200 , Bearing Washer Part No.-4350173500 , Bearing Washer Part No.-4350173600 , Gear Wheel Part No.-4350174100 , Shaft Part No.-4350176000 , Vane Kit Part No.-4350176890 , Gear Wheel Part No.-4350188100 , Spring Part No.-4350197100 , Gear Wheel Hous Part No.-4350203600 , Disc Kit Part No.-4350205690 , Sealing Set Part No.-4350205691 , Spring Set Part No.-4350205693 , Sealing Set Part No.-4350205694 , Hub Part No.-4350205900 , Interm.Part Part No.-4350216100 , Intermed. Part Part No.-4350216200 , Shaft Part No.-4350216300 , Bearing Washer Part No.-4350221100 , Ring Part No.-4350221900 , Rotor Part No.-4350250900 , Planet Gear Dr. Part No.-4350251100 , End Piece Part No.-4350253200 , Valve Part No.-4350254580 , Shaft Part No.-4350254900 , Seal Washer Part No.-4350255100 , Spindle Part No.-4350257094 , Gear Wheel Part No.-4350257500 , Intermed. Sh Part No.-4350258070 , Guard Part No.-4350258072 , Protection Part No.-4350258079 , Spindle Part No.-4350258094 , Seal Part No.-4350258217 , Seal Part No.-4350258218 , Adaptor Hous Part No.-4350258228 , Spare Parts Part No.-4350258401 , Spare Part S Part No.-4350258402 , Spare Parts Part No.-4350258403 , Spare Parts Part No.-4350258405 , Spare Parts Part No.-4350258406 , Spare Parts Part No.-4350258408 , Spare Parts Part No.-4350258430 , Spare Parts Part No.-4350258480 , Spare Parts Part No.-4350258481 , Spare Parts Part No.-4350261712 , Repair Kit Part No.-4350261714 , Spare Parts Part No.-4350261716 , Spare Parts Part No.-4350261717 , Cover Part No.-4350261720 , Floating Ada Part No.-4350261733 , Tool Part No.-4350261734 , House Part No.-4350265006 , Intermed. Sh Part No.-4350265007 , Cover Part No.-4350265009 , Back-Up Ring Part No.-4350265010 , Back-Up Ring Part No.-4350265011 , Guide Strip Part No.-4350265013 , Cover Part No.-4350265017 , Seal U-Ring Part No.-4350265024 , End Piece Part No.-4350261819 , Sealing Bush Part No.-4350265047 , Spacer Part No.-4350265083 , Spindle Part No.-4350265093 , Gear Wheel Part No.-4350265105 , Lifting Eye Part No.-4350265109 , Seal Holder Part No.-4350265118 , Shank Adapte Part No.-4350275021 , Spare Parts Part No.-4350276053 , Need.Bearing Part No.-5053010400 , Plastic Tubing Part No.-5054014000 , Buntband Part No.-5104088700 , Nippel Part No.-5107153400 , Slangledning Part No.-5107153600 , Appar. Panel Part No.-5112000030 , Loud Speaker Part No.-5112000139 , Gasket Part No.-5112000183 , Apparatus Pa Part No.-5112000288 , Drilled Box Part No.-5112000664 , El.Equipment Part No.-5112000686 , Relay Module Part No.-5112000740 , Safety Belt Part No.-5112000777 , Inner Handle Part No.-5112000778 , Inner Handle Part No.-5112000779 , Chair Compl. Part No.-5112000780 , Seal Kit Part No.-5112000788 , Push-Button- Part No.-5112000795 , Inner Light Part No.-5112000892 , Contactor Part No.-5112000897 , Socket Outle Part No.-5112001141 , Plug Connector Part No.-5112001142 , Gasket Part No.-5112001150 , Apparatus Pa Part No.-5112001220 , Panel A71 Part No.-5112001253 , Panel A74 Part No.-5112001260 , Panel A76 Part No.-5112001262 , Apparatus Pa Part No.-5112001287 , Control Box Part No.-5112001503 , Control Box Part No.-5112001513 , Junction Box Part No.-5112002041 , Drilled Box Part No.-5112002042 , Junction Box Part No.-5112002300 , Cable Complete Part No.-5112002648 , Cable Complete Part No.-5112002649 , Cable Complete Part No.-5112002652 , Cable Complete Part No.-5112002653 , Cable Complete Part No.-5112002654 , Cable Complete Part No.-5112002656 , Cable Complete Part No.-5112002657 , Cable Complete Part No.-5112002668 , Panel Part No.-5112002681 , Panel Part No.-5112002683 , Panel Plate Part No.-5112003731 , Display Kit Part No.-5112004800 , Spacer Part No.-5112010249 , Panel Plate Part No.-5112010273 , Cooling Hose Part No.-5112010323 , Cooling Hose Part No.-5112010324 , Cooling Hose Part No.-5112010325 , Cooling Hose Part No.-5112010326 , Chair Part No.-5112010351 , Junction Box Part No.-5112010401 , Switch Panel Part No.-5112010404 , Drivers Chai Part No.-5112010524 , Cable Complete Part No.-5112010541 , Junction Box Part No.-5112010548 , Junction Box Part No.-5112010550 , Cable Complete Part No.-5112010576 , Level Glass Part No.-5112010593 , Pawl Pin Part No.-5112010598 , Cable Complete Part No.-5112010686 , Cover Part No.-5112010709 , Floor Carpet Part No.-5112011325 , Support Bearing Part No.-5112011400 , Cable Complete Part No.-5112011488 , Cable Complete Part No.-5112011567 , Cable Part No.-5112012790 , Oil Seal Part No.-5112130140 , Pipe Part No.-5112142300 , Protect.Coil Part No.-5112157800 , Protect.Coil Part No.-5112157900 , Sleeve Insert Part No.-5112175800 , Bolt Set Part No.-5112188600 , Hyd.Cylinder Part No.-5112193380 , Gasket Part No.-5112200910 , Floor Rack Part No.-5112202100 , Ljuddämpare Part No.-5112205100 , Yoke Part No.-5112208402 , Hållare Part No.-5112208600 , Cable Complete Part No.-5112208800 , Ring Pin Part No.-5112209300 , Kabel Komplett Part No.-5112210500 , Tap.Collar Part No.-5112211806 , Rim Edge Part No.-5112211807 , Lock Ring Part No.-5112211808 , Dust Guard Part No.-5112213300 , Wire Part No.-5112213400 , Stop Control Part No.-5112213500 , Valve House Part No.-5112216300 , Lubr. Valve Part No.-5112216380 , H.Power Pipe Part No.-5112216400 , Cushion Part No.-5112218500 , Seal Part No.-5112221500 , Ground Braid Part No.-5112221600 , Earth Termin Part No.-5112221604 , Dämpare Part No.-5112232200 , Midjeaxel Part No.-5112232500 , Axel Part No.-5112232600 , Bushing Part No.-5112232800 , Fuel Tank Part No.-5112233180 , Fuel Tank Part No.-5112233181 , Fälghorn Part No.-5112233508 , Lock Ring Part No.-5112233509 , Fälg Kompl. Part No.-5112233580 , Clamp Part No.-5112233600 , Angle Bracke Part No.-5112233700 , Filler Pipe Part No.-5112233807 , Gasket Part No.-5112233900 , Cover Part No.-5112234000 , Gasket Part No.-5112234100 , Pilot Valve Part No.-5112234780 , Seal Kit Part No.-5112234792 , Valve Block Part No.-5112234880 , Assembly Set Part No.-5112234891 , Assembly Set Part No.-5112234893 , Rattstam Part No.-5112234980 , Steering Sha Part No.-5112235004 , Steering Whe Part No.-5112235010 , Steering Whe Part No.-5112235014 , Rattspinnare Part No.-5112235020 , Cover Washer Part No.-5112235021 , Cover Washer Part No.-5112235022 , Insulator Part No.-5112235478 , Attachment Part No.-5112235800 , Hyd.Cylinder Part No.-5112236080 , Axel Part No.-5112236300 , Cable Complete Part No.-5112236800 , Hook Part No.-5112237000 , Gasket Part No.-5112237200 , Attachment Part No.-5112237500 , Avgaskrök Part No.-5112237700 , Reducer Part No.-5112237800 , Bränsleslang Part No.-5112237900 , Bränsleslang Part No.-5112238003 , Bränsleslang Part No.-5112238005 , Safety Detail Part No.-5112238700 , Air Filter Part No.-5112239209 , Screw Part No.-5112239215 , Gasket Part No.-5112239216 , Filter Part No.-5112239217 , O-Ring Part No.-5112239219 , O-Ring Part No.-5112239222 , Pin Part No.-5112239229 , Plug Part No.-5112239234 , Magnetic Plug Part No.-5112239235 , Lock Washer Part No.-5112239240 , O-Ring Part No.-5112239248 , Bearing Part No.-5112239253 , Snap Ring Part No.-5112239257 , Lock Washer Part No.-5112239260 , Seal Part No.-5112239263 , Trunnion Block Part No.-5112239684 , Lubr.Oil Fil Part No.-5112240005 , Bränslefilter Part No.-5112240007 , Gasket Part No.-5112240008 , Service Kit Part No.-5112240022 , Service Kit Part No.-5112240031 , Fender Part No.-5112240300 , Damper Bit Part No.-5112240400 , Gummiskydd Part No.-5112240506 , Gummiskydd Part No.-5112240508 , Gas Wire Part No.-5112240700 , Stop Control Part No.-5112240800 , Nippel Part No.-5112240900 , Edge List Part No.-5112242500 , Clamp Part No.-5112243500 , Drive Plate Part No.-5112244804 , Pump Part No.-5112244815 , Avgasrenare Part No.-5112246300 , O-Ring Part No.-5112246512 , Lock Washer Part No.-5112246526 , Lock Ring Part No.-5112246569 , Bearing Part No.-5112246570 , Bearing Part No.-5112246571 , Bearing Part No.-5112246574 , Bearing Part No.-5112246611 , Bearing Part No.-5112246619 , Lock Ring Part No.-5112246623 , Piston Ring Part No.-5112246631 , Lock Washer Part No.-5112246639 , O-Ring Part No.-5112246641 , Seal Part No.-5112246666 , Washer Part No.-5112246671 , Nut Part No.-5112246672 , Seal Part No.-5112246674 , O-Ring Part No.-5112246701 , Nut Part No.-5112246719 , Screw Part No.-5112246722 , O-Ring Part No.-5112246729 , Solen.Valve Part No.-5112246745 , Plug Part No.-5112246748 , Plug Part No.-5112246751 , Plug Part No.-5112246759 , O-Ring Part No.-5112246760 , Avgasslang Part No.-5112247800 , Nippel Part No.-5112247900 , Plate Part No.-5112249300 , Cushion Part No.-5112252300 , Cover Part No.-5112252400 , Bushing Part No.-5112252500 , Bushing Part No.-5112252600 , Protection Part No.-5112253104 , Gasket Part No.-5112253200 , Shaft Part No.-5112253800 , Indicator Part No.-5112254101 , Relay Shelf Part No.-5112254700 , Clutch Contr Part No.-5112255200 , S.Wheel Post Part No.-5112255500 , Steering Sha Part No.-5112255501 , Control Unit Part No.-5112255680 , Silencer Part No.-5112255909 , O-Ring Part No.-5112256007 , O-Ring Part No.-5112256012 , Wheel Hut Part No.-5112256024 , Wheel Bolt Part No.-5112256076 , Seal Ring Part No.-5112256206 , Ring Part No.-5112256603 , Lock Ring Part No.-5112256604 , Rim Collar Part No.-5112256605 , Hyd.Cylinder Part No.-5112257080 , Inner Tube Part No.-5112257107 , Valve Part No.-5112257109 , Cardan Shaft Part No.-5112257280 , Cardan Shaft Part No.-5112257480 , Band Part No.-5112257900 , Load Valve Part No.-5112259180 , Brake Valve Part No.-5112287777 , Press.Guard Part No.-5112259500 , Bracket Part No.-5112259900 , Cable Complete Part No.-5112260000 , Cable Complete Part No.-5112260100 , Holder Part No.-5112260600 , Knob Part No.-5112260700 , Gummistropp Part No.-5112260800 , Attachment Part No.-5112260900 , Batterilock Part No.-5112261000 , Coupling Part No.-5112262200 , Kilrem Part No.-5112263506 , Kilrem Part No.-5112263507 , Givare Part No.-5112263508 , Vibr. Damper Part No.-5112264100 , Eng. Bracket Part No.-5112264200 , Flange Scr.Set Part No.-5112264300 , U-Bolt Part No.-5112264600 , Thrott.Wire Part No.-5112265100 , Exhaust Hose Part No.-5112265200 , Cable Complete Part No.-5112265800 , Cable Complete Part No.-5112265900 , Exhaust Bend Part No.-5112266000 , Accumulator Part No.-5112268032 , Attachm. Plate Part No.-5112271000 , Fender Part No.-5112271600 , Return Hose Part No.-5112272300 , Protection Part No.-5112273000 , Batterihylla Part No.-5112273124 , Strap Part No.-5112273137 , Washer Part No.-5112280302 , Screw Part No.-5112280318 , Screw Part No.-5112280339 , Lock Ring Part No.-5112280394 , Bearing Part No.-5112280399 , Cap Part No.-5112280409 , Ball Part No.-5112280513 , Spacer Ring Part No.-5112280514 , Shim Part No.-5112280531 , Shim Part No.-5112280532 , Shim Part No.-5112280533 , Shim Part No.-5112280534 , Bearing Cover Part No.-5112280535 , Ball Part No.-5533009100 , Spring Part No.-5112280560 , Seal Washer Part No.-5112280572 , Attachment Part No.-5112281200 , Blindfläns Part No.-5112282400 , Bracket Part No.-5112282600 , Steer. Unit Part No.-5112283780 , Guide Unit Part No.-5112283881 , Valve Plug Part No.-5112283883 , Guide Unit Part No.-5112283884 , Valve Part No.-5112283980 , Valve Part No.-5112283981 , Relähylla Part No.-5112286300 , Gear Control Part No.-5112286500 , Hydr.Pump Part No.-5112287734 , Hydr. Motor Part No.-5112287741 , Hydr.Motor Part No.-5112287742 , Shuttle Valv Part No.-5112287767 , Press.Switch Part No.-5112287771 , Pr.Red.Valve Part No.-5112287773 , Brake Valve Part No.-5112287777 , Hydraulic Pu Part No.-5112287789 , Direction Va Part No.-5112287790 , Hydraulic Pu Part No.-5112287797 , Hydraulic Pu Part No.-5112287801 , Hydraulic Pu Part No.-5112287802 , Gear Pump Part No.-5112287803 , Flow Regulat Part No.-5112287804 , Brake Valve Part No.-5112287805 , Brake Valve Part No.-5112287806 , Actuator Part No.-6060002166 , Valve Block Part No.-5112287815 , Brake Valve Part No.-5112287816 , Hydraulic Pu Part No.-5112287817 , Hydraulic Mo Part No.-5112287818 , Hydraulic Bl Part No.-5112287819 , Gear Pump Part No.-5112287825 , Gear Pump Part No.-5112287826 , Gear Pump Part No.-5112287827 , Check Valve Part No.-5112287832 , Guide Unit Part No.-5112287836 , Sealing Part No.-5112287843 , Locking Ring Part No.-5112287846 , Guide Unit Part No.-5112287850 , Gasket Part No.-5112287851 , Filter Part No.-5112287852 , Seal Kit Part No.-5112287855 , O-Ring Part No.-5112287857 , Filter Insert Part No.-6060006878 , Seal Kit Part No.-5112287860 , Seal Kit Part No.-5112287861 , O-Ring Part No.-5112287863 , O-Ring Part No.-5112287864 , Gasket Part No.-5112287865 , Seal Kit Part No.-5112287866 , Valve Part No.-5112287872 , Valve Part No.-5112287873 , Hydraulic Bl Part No.-5112287875 , Thermostat Part No.-5112287876 , Seal Kit Part No.-5112287884 , Hydraulic Pu Part No.-5112287894 , Valve Part No.-5112287901 , Valve Part No.-5112287902 , Valve Part No.-5112287903 , Seal Kit Part No.-5112287906 , Suction Filt Part No.-5112288890 , Suction Hose Part No.-5112288892 , Manometer Part No.-5112288895 , Brake Valve Part No.-5112288898 , Cover Part No.-5112290900 , Accumulator Part No.-5112291500 , Accumulator Part No.-5112291510 , Press.Guard Part No.-5112292100 , Press.Guard Part No.-5112292101 , Level-Temp.I Part No.-5112293100 , Pressure Screw Part No.-5112293101 , Termometer Part No.-5740184127 , Pressure Screw Part No.-5112293103 , Connection S Part No.-5112293190 , Foot Pedal Part No.-5112294300 , Gummibuffert Part No.-5112294601 , Press.Guard Part No.-5112294800 , Protect. Cover Part No.-5112294900 , Protect. Cov Part No.-5112294901 , Cardan Protect. Part No.-5112300038 , Bracket Part No.-5112300085 , Bracket Part No.-5112300086 , Bushing Part No.-5112300090 , Flange Scr.Set Part No.-5112300159 , Protection Part No.-5112300170 , Protection Part No.-5112300171 , Pedal Part No.-5112300251 , Clip Part No.-5112300268 , Lock Sheet Part No.-5112300307 , Frict.Washer Part No.-5112300310 , Pin Part No.-5112300315 , Nut Part No.-5112300323 , Ring Part No.-5112300331 , Shaft Part No.-5112300334 , Hjulbult Part No.-5112300335 , Plug Part No.-5112300337 , Pin Part No.-5112300338 , Hållare Part No.-5112300343 , Låsring Part No.-5112300344 , Gear Ring Part No.-5112300345 , Friktionsring Part No.-5112300350 , Bult Part No.-5112300351 , Plugg Part No.-5112300352 , Fjäder Part No.-5112300355 , Skruv Part No.-8440303687 , Air Screw Part No.-5112300357 , Plugg Part No.-5112300358 , Brake Disc Part No.-5112300359 , Brake Disc Part No.-5112300360 , Justerskruv Part No.-5112300361 , Gasket Part No.-5112300362 , O-Ring Part No.-5112300363 , Kolv Part No.-5112300364 , Bearing Part No.-5112300375 , Pin Part No.-5112300377 , Bearing Part No.-5112300378 , Bearing Part No.-5112300379 , Bearing Part No.-5112300380 , O-Ring Part No.-5112300383 , Bearing Part No.-5112318941 , Lock Part No.-5112300396 , Screw Part No.-5112300398 , Cardan Shaft Part No.-5112300407 , Suct.-Retu.Pipe Part No.-5112300410 , Cushion Part No.-5112300413 , Bushing Part No.-5112300414 , Bushing Part No.-5112300419 , U-Bolt Part No.-5112300424 , Gasket Part No.-5112300463 , Distrib.Gear Part No.-5112300477 , Gasket Part No.-5112300484 , Plugg Part No.-5112300485 , Låsplatta Part No.-5112300501 , Pinjong Part No.-5112300502 , O-Ring Part No.-5112300503 , Foot Part No.-5112300509 , Fuel Hose Part No.-5112300514 , Attachm. Plate Part No.-5112300542 , Pin Part No.-5112300550 , Pinnskruv Part No.-5112300551 , Attachm. Plate Part No.-5112300553 , Level Switch Part No.-5112300555 , Panel Plate Part No.-5112300575 , Rim Compl. Part No.-5112300579 , Bend Part No.-5112300581 , Catalyser Part No.-5112300590 , Oil Reservoir Part No.-5112300607 , Fan Belt Part No.-5112300709 , Generat.Belt Part No.-5112300710 , Throttle Wire Part No.-5112300726 , Catch Piston Part No.-5112300733 , Floor Rack Part No.-5112300740 , Pump Carrier Part No.-5112300746 , Bearing Part No.-5112300748 , Nut Part No.-5112300750 , Magnet.Plug Part No.-5112300751 , Attachment Part No.-5112300754 , Attachment Part No.-5112300755 , Oil Filter Part No.-5112300759 , Hand Lever Part No.-5112300788 , Arm Rest Part No.-5112300790 , Hydraulic Pump Part No.-5112287826 , Spacer Part No.-5112301018 , Suction Hose Part No.-5112301028 , Flange Part No.-5112301032 , Bushing Part No.-5112301033 , Mould Part No.-5112301053 , Plate Part No.-5112301068 , Bushing Part No.-5112301200 , Prot.Sheild Part No.-5112301202 , Chairsupport Part No.-5112301210 , Switch Kit Part No.-5112301324 , Suction Hose Part No.-5112301405 , Hatch Part No.-5112301556 , Suct.Retpipe Part No.-5112302029 , Pinnskruv Part No.-5112302043 , Bränsletank Part No.-5112302066 , Spännband Part No.-5112302087 , Hake Part No.-5112302091 , Cardan Shaft Part No.-5112302093 , Cardan Shaft Part No.-5112302094 , Cardan Shaft Part No.-5112302095 , Cover Part No.-5112302107 , Hydraulic Pump Part No.-5112302112 , Drivaxel Part No.-5112302115 , Protection Part No.-5112302133 , Silencer Part No.-5112302135 , Cardan Shaft Part No.-5112302141 , Cable Complete Part No.-5112302178 , Nippel Part No.-5112302181 , Drive Axle Part No.-5112302184 , Temperaturvakt Part No.-5112302186 , Press.Guard Part No.-5112302188 , Rev. Alarm Part No.-5112302199 , Horn Part No.-5112302200 , Slang Part No.-5112302218 , Air Filter Part No.-5112302264 , Pipe Part No.-5112302267 , Protec.Cap Part No.-5112302268 , Rubber Elbow Part No.-5112302272 , Filtercartridge Part No.-5112302277 , Domkraftrör Part No.-5112302287 , Press.Guard Part No.-5112302293 , Motor Bracke Part No.-5112302305 , Press.Guard Part No.-5112302343 , Press.Guard Part No.-5112302347 , Accum. Kit Part No.-5112302450 , Brake Disc Kit Part No.-5112302466 , Renoveringssats Part No.-5112302467 , Crown Wheel Kit Part No.-5112302468 , Planet Gear Kit Part No.-5112302471 , Attachment Part No.-5112302473 , Filter Part No.-5112302498 , Steering Kit Part No.-5112302514 , Hand Trottle Part No.-5112302870 , Cable Complete Part No.-5112303099 , Tank Cover Part No.-5112303163 , Safe Cartr. Part No.-5112303210 , O-Ring Part No.-5112303214 , Hydr. Cylinder Part No.-8232300140 , Holder Part No.-5112303273 , Throttl.Wire Part No.-5112303402 , Gasket Part No.-5112303428 , Exh.Gasket Part No.-5112303446 , Gasket Part No.-5112303454 , Exhaust Hose Part No.-5112303547 , Plate Part No.-5112303597 , Scuffing Plate Part No.-5112303609 , Plain Bearing Part No.-5112303638 , Waist Shaft Part No.-5112303639 , Waist Pin Part No.-5112303640 , Pipe Part No.-5112303652 , Rubber Cloth Part No.-5112303688 , Shaft Part No.-5112303700 , Lock Sheet Part No.-5112303701 , Fan Belt Part No.-5112303703 , Starter Part No.-5112303704 , Bracket Part No.-5112303727 , Bearing Part No.-5112303729 , Cardan Shaft Part No.-5112303731 , Screw Part No.-5112303813 , Palm Grip Part No.-5112303934 , T-Screw Part No.-5112303964 , Throttl.Wire Part No.-5112304069 , Attachment Part No.-5112304179 , Filler Set Part No.-5112304180 , Suction And Part No.-5112304280 , Fuse C.Term. Part No.-5112304310 , Mark.Plate Part No.-5112304312 , Bridge Conn. Part No.-5112304313 , Fuse Part No.-5112304314 , Fuse Part No.-5112304315 , Fuse Part No.-5112304316 , Fuse Part No.-5112304317 , Fuse Part No.-5112304318 , Fuse Part No.-5112304319 , Diode Unit Part No.-5112304333 , Strålkastare Part No.-5112304340 , Diode Unit Part No.-5112304356 , Shaft Part No.-5112304410 , Shaft Part No.-5112304427 , Nippel Part No.-5112304436 , Plate Part No.-5112304599 , Ignition Loc Part No.-5112304672 , Igniton Key Part No.-5112304673 , Flat Pin Sleeve Part No.-5112304691 , Ign. Lock Part No.-5112304692 , Block Part No.-5112304903 , Cap Part No.-5112304906 , Guide Disc Part No.-5112304908 , Attachment Part No.-5112304912 , Air Filter Set Part No.-5112305196 , Protection Part No.-5112305210 , Coupl.Compl. Part No.-5112305238 , Filter Set Part No.-5112305245 , Cardan Shaft Part No.-5112305269 , Damping Elem Part No.-5112305509 , Clamp Part No.-5112305767 , Exh. Gasket Part No.-5112305775 , Ljuddampare Part No.-5112305814 , Waist Pin Part No.-5112306083 , Stay Part No.-5112306086 , Clamp Part No.-5112306100 , Floor Carpet Part No.-5112306121 , Plastic Shee Part No.-5112306134 , Slangnippel Part No.-5112306139 , Washer Part No.-5112306187 , Tie Rod Part No.-5112306251 , Back-Up Ring Part No.-5112306296 , Pin Part No.-5112306364 , Mudguard Part No.-5112306412 , Nipple Block Part No.-5112306464 , Cardan Shaft Part No.-5112306540 , Control Arm Part No.-5112306628 , Silencer Part No.-5112306706 , Rubber Prot. Part No.-5112306756 , Door Stop Part No.-5112306818 , Door Stop Part No.-5112306819 , Gas Spring Part No.-5112306820 , Windshield W Part No.-5112306879 , Pane Part No.-5112306955 , Arm Part No.-5112306974 , Wiper Arm Part No.-5112306977 , Wiper Arm Part No.-5112306978 , Windsh.Wiper Part No.-5112306980 , Gas Spring Part No.-5112306985 , Air Receiver Part No.-5112307039 , Cardan Shaft Part No.-5112307040 , Air Reciever Part No.-5112307052 , Mudguard Part No.-5112307077 , Rubber Elbow Part No.-5112307153 , Cover W Seal Part No.-5112307161 , Exhaust Pipe Part No.-5112307164 , Rubber Prot. Part No.-5112307199 , Cardan Shaft Part No.-5112307200 , Shaft Part No.-5112307206 , Clamp Part No.-5112307213 , Silencer Part No.-5112307238 , Collect. Block Part No.-5112307252 , Attachment Part No.-5112307277 , Cover Plate Part No.-5112307281 , Pulley Part No.-5112307474 , Clamp Half Part No.-5112307476 , Rod Part No.-5112307487 , Cog Belt Part No.-5112307488 , Chair Suppor Part No.-5112307489 , Cover Comple Part No.-5112307569 , Bearing Part No.-5112307599 , Cover Plate Part No.-5112307600 , Attachment Part No.-5112307725 , Connection S Part No.-5112307735 , Clamp Part No.-5112307759 , Binder Box Part No.-5112307800 , Floor Carpet Part No.-5112307858 , Potentiomete Part No.-5112307887 , Floor Carpet Part No.-5112307899 , Support Leg Part No.-5112307913 , Support Leg Part No.-5112307920 , Support Leg Part No.-5112307921 , Support Leg Part No.-5112307929 , Support Leg Part No.-5112307930 , Kantlist Part No.-5112308127 , Filt. W.Fram Part No.-5112308136 , Motor Con.Va Part No.-5112308154 , Sealing List Part No.-5112308169 , Heating Part No.-5112308194 , T-Coupling Part No.-5112308197 , Contact Part No.-5112308198 , Attachment Part No.-5112308246 , Hub Part No.-5112308299 , Hub Part No.-5112308304 , Flange Part No.-5112308339 , Coupling Com Part No.-5112308345 , Expand. Bush Part No.-5112308376 , Pulley Part No.-5112308377 , Belt Protect Part No.-5112308379 , Fan W.Motor Part No.-5112308575 , Fan Part No.-5112308579 , Switch Part No.-5112308582 , Fan W. Motor Part No.-5112308584 , Fan W. Motor Part No.-5112308586 , Heating Part No.-5112308587 , Cover Plate Part No.-5112308660 , Gasket Part No.-5112310000 , Cover Set Part No.-5112310001 , Cable Inlet Part No.-5112310002 , Cable Gland Part No.-5112310004 , Gear Wheel Part No.-5112310005 , Key Part No.-5112310006 , Key Part No.-5112310008 , Pull Rod Set Part No.-5112310010 , Roller Part No.-5112310011 , Guide Pin Part No.-5112310012 , Gear Wheel Part No.-5112310013 , Roller Chain Part No.-5112310014 , Link Part No.-5112310015 , Coupling Part No.-5112310016 , Cable Steering Part No.-5112310018 , Wire Mesh Hose Part No.-5112310019 , Spacer Part No.-5112310021 , Centre Pipe Part No.-5112310022 , Centre Pipe Part No.-5112310023 , Pull Rod Part No.-5112310024 , Roller Part No.-5112310025 , Roller Part No.-5112310026 , Sliding Piece Part No.-5112310028 , Brake Disc Kit Part No.-5112310030 , Crown Wheel Kit Part No.-5112310032 , Diff.Kit Part No.-5112310033 , Planet Gear Kit Part No.-5112310035 , Repair Kit Part No.-5112310037 , Repair Kit Part No.-5112310038 , Wheel Bolt Part No.-5112310053 , Cover Part No.-5112310054 , Shaft Set Part No.-5112310055 , Seal Kit Part No.-5112310056 , Lubr.System Part No.-5112310062 , Repair Kit Part No.-5112310099 , Shaft Part No.-5112310100 , Block Part No.-5112310103 , Support Part No.-5112310108 , Frame Part No.-5112310110 , Gasket Part No.-5112310111 , Attachment Part No.-5112310113 , Guide Part No.-5112310114 , Protection Part No.-5112310116 , Seal Part No.-5112310135 , Fuel System Part No.-5112310139 , Gasket Part No.-5112310155 , Starter Part No.-5112310159 , Renoveringssats Part No.-5112310180 , Magnetspole Part No.-5112310181 , Wheel Bolt Part No.-5112310199 , Center.Ring Part No.-5112310201 , Startnyckel Part No.-5112310220 , Quad-Ring Part No.-5112310222 , Angle Indica Part No.-5112310243 , Avgaskrök Part No.-5112310248 , By Pass Valve Part No.-5112310260 , Trunn.Block Part No.-5112310269 , Smörjnippel Part No.-5112310278 , Knutkors Part No.-5112310282 , Clamp Part No.-5112310285 , Level Glass Part No.-5112310299 , Level Glass Part No.-5112310312 , Gear Housing Part No.-5112310474 , Glass P.Bead Part No.-5112310501 , Glassp.Bead Part No.-5112310502 , Filler Sect. Part No.-5112310507 , Glass Part No.-5112310517 , Sealing List Part No.-5112310534 , Evaporator Part No.-5112310561 , Exp. Valve Part No.-5112310562 , Pane Part No.-5112310775 , Glass Part No.-5112310776 , Glass Part No.-5112310777 , Seal Kit Part No.-5112310918 , Flange Fork Part No.-5112310919 , Trunnion Block Part No.-5112310920 , Seal Kit Part No.-5112310922 , Counter Flange Part No.-5112310923 , Washer Part No.-5112310924 , Nut Part No.-5112310925 , Shaft Seal Part No.-5112310948 , Solenoid Part No.-5112310949 , Valve Part No.-5112310959 , Direction Valve Part No.-5112310960 , Brake Lining Part No.-5112310975 , Seal Kit Part No.-5112311069 , Anslutning Part No.-5112311175 , Plan.Carrier Part No.-5112311277 , Shaft Part No.-5112311282 , Skruv Part No.-5112311285 , Seal Ring Part No.-5112311295 , O-Ring Part No.-5112311296 , O-Ring Part No.-5112311299 , Reaction Wheel Part No.-5112311451 , Seal Part No.-5112311728 , Panel Part No.-5112312008 , Shock Valve Part No.-5112312019 , Flange Part No.-5112312040 , O-Ring Part No.-5112312048 , O-Ring Part No.-5112312052 , Glass Part No.-5112312112 , Block Part No.-5112312199 , Tension Whee Part No.-5112312376 , Turntable Part No.-5112312458 , Brake Light Part No.-5112312473 , Jet Nozzle Part No.-5112312485 , Socket Inlet Part No.-5112312506 , Halogen Lamp Part No.-5112312527 , Socket Coupl Part No.-5112312533 , Bulb Part No.-5112312540 , Gasket Part No.-5112312590 , Fuel Tank Part No.-5112312607 , Rim Part No.-5112312636 , Spacer Tube Part No.-5112312666 , Spacer Tube Part No.-5112312667 , Rubber Plate Part No.-5112312678 , Attachment Part No.-5112312686 , Plate Part No.-5112312851 , Stage Part No.-5112313006 , Stage Part No.-5112313010 , Stairs Side Part No.-5112313015 , Plate Part No.-5112313068 , Sealing List Part No.-5112313257 , O-Ring Part No.-5112313308 , O-Ring Part No.-5112313317 , Seal Part No.-5112313323 , Hjulmutter Part No.-5112313325 , Cylinder Bolt Part No.-5112313328 , O-Ring Part No.-5112313333 , Mutter Part No.-5112313335 , O-Ring Part No.-5112313336 , O-Ring Part No.-5112313339 , Seal Part No.-5112313349 , Cable Part No.-5112313424 , Backalarm Part No.-5112313433 , Conector Part No.-5112313460 , Contact Hous Part No.-5112313474 , Wiring Part No.-5112313477 , Wiring Part No.-5112313478 , Protect. Cover Part No.-5112313577 , Protect. Cover Part No.-5112313582 , Platform Part No.-5112313609 , Suction Hose Part No.-5112313646 , Suction Hose Part No.-5112313647 , Yoke Part No.-5112313700 , Bränslemätare Part No.-5112313768 , Fuel Gauge Part No.-5112313774 , Attachment Part No.-5112313784 , Cover Part No.-5112313793 , Strömställare Part No.-5112313808 , Light Set Part No.-5112313833 , Flash Light Part No.-5112313902 , Shaft Coupl. Part No.-5112313968 , Protection Part No.-5112314007 , Gasket Part No.-5112314082 , Plate Part No.-5112314467 , Ignition Loc Part No.-5112314648 , Contactor Part No.-5112314728 , Push Bu.Box Part No.-5112314731 , Panel Part No.-5112314771 , Flash Light Part No.-5112314774 , Earth Bar Part No.-5112314858 , Support Beam Part No.-5112314868 , Shaft Part No.-5112314872 , Stop Pin Part No.-5112314954 , Ignition Key Part No.-5112314971 , Set Part No.-5112314972 , Hydr.Pump Part No.-5112315100 , Attachment Part No.-5112315260 , Relay Part No.-5112315262 , Relay Socket Part No.-5112315263 , Bricka Part No.-5112315290 , Proection Sh Part No.-5112315317 , Drive Shaft Part No.-5112315535 , El.Oil Filler Part No.-5112315606 , Cylinder Part No.-5112315616 , Shaft Part No.-5112315661 , Coupling Com Part No.-5112315690 , Pump Carrier Part No.-5112315732 , Inter. Shaft Part No.-5112315734 , Inter. Shaft Part No.-5112315735 , Cardan Shaft Part No.-5112315736 , Emerg.Stop Part No.-5112315844 , Min Circ Bre Part No.-5112315997 , Min Circ Bre Part No.-5112315998 , Min Circ Bre Part No.-5112315999 , Min Circ Bre Part No.-5112316000 , Shaft Part No.-5112316008 , Electric Set Part No.-5112316207 , Brush Holder Part No.-5112316208 , Attachm. Nut Part No.-5112316209 , Hose Holder Part No.-5112316285 , Control Atta Part No.-5112316377 , Control Arm Part No.-5112316378 , Voltage Conv Part No.-5112316653 , Cylinder Part No.-5112316663 , Rim Band Part No.-5112316697 , Slip Ring Part No.-5112316795 , Gasket Part No.-5112316890 , Junction Box Part No.-5112316914 , Wiring Part No.-5112316926 , Junction Box Part No.-5112316930 , Shaft Part No.-5112316944 , Glow Control Part No.-5112316951 , Relay Part No.-5112316952 , Generator Part No.-5112316953 , Starter Part No.-5112316954 , Pressure Swi Part No.-5112316955 , Thermostat Part No.-5112316956 , Seal Part No.-5112316961 , O-Ring Part No.-5112316964 , Compressor H Part No.-5112317108 , Trigger Part No.-5112317140 , Brake Disc Part No.-8440300562 , Flange Part No.-5112317170 , Hub Part No.-5112317173 , Fuse Holder Part No.-5112317224 , Plate Part No.-5112317229 , Connector Part No.-5112317254 , Fuse Box Part No.-5112317271 , Bridge Conne Part No.-5112317272 , Fuse Part No.-5112317273 , Fuse Part No.-5112317276 , Fuse Box Part No.-5112317703 , Hatch Part No.-5112317704 , Cover Part No.-5112317720 , Hatch Part No.-5112317724 , Hatch Part No.-5112317725 , Hinge Part No.-5112317742 , Spacer Part No.-5112317743 , Batterimodul Part No.-5112317828 , Gasket Part No.-5112317848 , Rubber Elbow Part No.-5112317973 , Exhaust Bend Part No.-5112317977 , Exhaust Hose Part No.-5112317983 , Valve Attm. Part No.-5112317988 , Kopplingshus Part No.-5112318017 , Stand Frame Part No.-5112318261 , Bearing Set Part No.-5112318262 , Gear Housing Part No.-5112318263 , Cylinder Part No.-5112318315 , Insulator Part No.-3217560234 , Brush Part No.-5112318324 , Pipe Part No.-5112318325 , Drilled Box Part No.-5112318326 , Shaft Set Part No.-5112318652 , Spare Part S Part No.-5112318654 , Spare Parts Part No.-5112318661 , Lock Part No.-5112318663 , Caliper Part No.-5112318680 , Brake Part No.-5112318687 , Crown Wheel Part No.-5112318690 , Thermostat Part No.-5112318692 , Diff.Kit Part No.-5112318701 , Cardan Shaft Part No.-5112318718 , Drive Shaft Part No.-5112318722 , Drive Shaft Part No.-5112318728 , Temp. Sensor Part No.-5112318750 , Temp. Gauge Part No.-5112318751 , Spring Part No.-5112318765 , O-Ring Part No.-5112318773 , Bolt Part No.-5112318775 , Shim Part No.-5112318778 , Shim Part No.-5112318779 , Shim Part No.-5112318780 , Shim Part No.-5112318782 , Shim Part No.-5112318783 , Shim Part No.-5112318784 , Shim Part No.-5112318785 , Shim Part No.-5112318786 , O-Ring Part No.-5112318787 , Diff. Kit Part No.-5112318793 , Spring Part No.-5112318794 , Shim Part No.-5112318796 , Shim Part No.-5112318797 , Shim Part No.-5112318798 , Disc Part No.-5112318799 , Disc Part No.-5112318800 , Disc Part No.-5112318801 , Different.Wheel Part No.-5112318803 , Shaft Part No.-5112318804 , Shaft Part No.-5112318809 , Shaft Set Part No.-5112318816 , Collector Part No.-5112318818 , Drum Part No.-5112318819 , Brake Disc K Part No.-5112318831 , Commutator Part No.-5112318838 , Gasket Part No.-5112318871 , Brake Disc K Part No.-5112318884 , Brake Disc K Part No.-5112318887 , Crown Wheel Part No.-5112318899 , Brake Light Part No.-5112318906 , Diff.Kit Part No.-5112318909 , Gear Part No.-5112318920 , Torque Unit Part No.-5112318921 , Swivel Kit Part No.-5112318922 , Front Tubes Part No.-5112318924 , Rear Tubes K Part No.-5112318925 , Support Part No.-5112318935 , Bearing Part No.-5112318941 , O-Ring Part No.-5112318945 , O-Ring Part No.-5112318946 , O-Ring Part No.-5112318983 , Bearing Part No.-5112318986 , Seal Ring Part No.-5112318988 , Planet Gear Part No.-5112318991 , Shaft Part No.-5112319000 , Bushing Part No.-5112319002 , Diff.Case Part No.-5112319017 , Diff.Kit Part No.-5112319018 , Crown Wheel Part No.-5112319023 , Piston Part No.-5112319083 , O-Ring Part No.-5112319102 , O-Ring Part No.-5112319108 , Control Box Part No.-5112319116 , Disk Part No.-5112319149 , Hydraulic Cy Part No.-5112319152 , Brake Disc Part No.-5112319158 , Plug Part No.-5112319161 , Plug Part No.-5112319162 , Screw Part No.-5112319163 , O-Ring Part No.-5112319173 , Solenoid Val Part No.-5112319229 , Seal Washer Part No.-5112319249 , Screw Part No.-5112319289 , Seal Part No.-5112319306 , Vane Kit Part No.-5112319311 , Diff.Kit Part No.-5112319320 , Planet Gear Part No.-5112319328 , Earth Ring K Part No.-5112319331 , Bushing Set Part No.-5112319333 , Pilotring Ki Part No.-5112319340 , Brush/Insul. Part No.-5112319350 , Phase Rings Part No.-5112319351 , Insulating S Part No.-5112319352 , Cover, Cpl. Part No.-5112319365 , Valve Cover Part No.-5112319366 , Hose Protection Part No.-5112319368 , Cover Plate Part No.-5112319384 , Plate Part No.-5112319404 , Plate Part No.-5112319405 , Wheel Part No.-5112319434 , Phase Rings Kit Part No.-5112319472 , Earth Ring K Part No.-5112319473 , Insulating S Part No.-5112319474 , Attachment S Part No.-5112319475 , Seal Washer Part No.-5112319540 , Shaft Part No.-5112319589 , Bushing Part No.-5112319592 , Spacer Part No.-5112319611 , Sleeve Part No.-5112319612 , Spacer Part No.-5112319614 , Lever Set Part No.-5112319633 , Inner Tube Part No.-5112319656 , Screw Part No.-5112319733 , Kit Part No.-5112319763 , Kit Part No.-5112319764 , Diff.Sats Part No.-5112319770 , Bromslamells Part No.-5112319771 , Kronhjulssat Part No.-5112319772 , Brake Lining Part No.-5112319823 , Pressure Swi Part No.-5112319864 , Hydraulic Cy Part No.-5112319876 , Seal Part No.-5112319925 , Rim Compl. Part No.-5112319955 , Rim Part No.-5112319956 , Ring Part No.-5112319957 , Rim Collar Part No.-5112319958 , Lock Ring Part No.-5112319959 , Valve Part No.-5112319962 , Inner Tube Part No.-5112319963 , Rim Band Part No.-5112319964 , Wheel Nut Part No.-5112319973 , Condenser Un Part No.-5112319976 , Condensor Part No.-5112319977 , Evaporator Part No.-5112319978 , Heater Eleme Part No.-5112319979 , O-Ring Part No.-5112319989 , Planet Gear Part No.-5112319996 , Diff.Kit Part No.-5112319999 , Pane Part No.-5112320023 , Pane Part No.-5112320035 , Pane Part No.-5112320036 , Window Slide Part No.-5112320048 , Pane Part No.-5112320069 , Pane Part No.-5112320070 , Pane Part No.-5112320071 , Gasket Part No.-5112320094 , Lock Lever Part No.-5112320099 , Filtercover Part No.-5112320159 , Wheel Bolt Part No.-5112320173 , Pin Part No.-5112320176 , Differential Part No.-5112320182 , Crown Wheel Part No.-5112320189 , Lamp Attachm Part No.-5112320190 , Crown Wheel Part No.-5112320197 , Clipsnut Part No.-5112320199 , Exhaust Seal Part No.-5112320225 , Exhaust Wldm Part No.-5112320226 , Exhaust Hose Part No.-5112320232 , Catalyzer+Si Part No.-5112320233 , Clamp Part No.-5112320238 , Catalyser Part No.-5112320239 , Silencer Part No.-5112320240 , Inlet Port Part No.-5112320245 , Shaft Part No.-5112320272 , Seal Part No.-5112320283 , Sleeve Coupling Part No.-5112320284 , Shaft Part No.-5112320287 , Planet Gear Part No.-5112320291 , Attachment Part No.-5112320467 , Parallel Arm Part No.-5112320470 , Parallel Arm Part No.-5112320473 , Attachment Part No.-5112320475 , Attachment Part No.-5112320476 , Washer Part No.-5112320477 , Spacer Tube Part No.-5112320478 , Pane Part No.-5112320491 , Motor Unit Part No.-5112320495 , Control Unit Part No.-5112320496 , Crown Wheel Part No.-5112320548 , Brake Disc K Part No.-5112320589 , Planet Gear Part No.-5112320595 , Crown Wheel Part No.-5112320632 , Pane Part No.-5112320707 , Pull Rod Part No.-5112320720 , Inner Handle Part No.-5112320722 , Inner Handle Part No.-5112320723 , Window Strip Part No.-5112320726 , Hatch Part No.-5112320754 , Filter Gauge Part No.-5112321213 , Roller Part No.-5112321290 , Roller Part No.-5112321291 , Drive Shaft Part No.-5112321427 , Fuse Part No.-5112321443 , Ball Bearing Part No.-0503210900 , Hydr.Transmi Part No.-5112321664 , Wiring Part No.-5112321713 , Solenoid Part No.-5112321729 , Coupling Com Part No.-5112321736 , Accel. Pedal Part No.-5112004656 , Control Attm. Part No.-5112321746 , Accelerator Part No.-5112321749 , Wiring Part No.-5112321754 , Relief Valve Part No.-5112321756 , Pane Laminat Part No.-5112321757 , Gasket Part No.-5112321779 , Junction Box Part No.-5112321781 , Gasket Part No.-5112321786 , Solenoid Part No.-5112321959 , Gasket Part No.-5112321964 , Support Bear Part No.-5112321965 , Gas Spring Part No.-5112321966 , Bearing Race Part No.-5112321977 , Brake Lining Part No.-5112322079 , Generator Part No.-5112322114 , Solenoid Val Part No.-5112322130 , Attach.Left Part No.-5112322196 , Silencer Part No.-5112322236 , Purifier Part No.-5112322237 , Clamp Part No.-5112322239 , Cable Complete Part No.-5112322266 , Cable Complete Part No.-5112322267 , Cable Complete Part No.-5112322268 , Cable Complete Part No.-5112322269 , Cable Complete Part No.-5112322270 , Cable Complete Part No.-5112322271 , Dropbox Part No.-5112322308 , O-Ring Part No.-5112322312 , Shaft Coupling Part No.-5112322418 , Flange Part No.-5112322468 , Hub Part No.-5112322469 , Block Part No.-5112322474 , Arm Rest Set Part No.-5112322558 , Flange Fork Part No.-5112322565 , Filter Part No.-5112322616 , Intake Hose Part No.-5112322622 , Rim Compl. Part No.-5112322658 , Throttle Con Part No.-5112322662 , Flash Light, Part No.-5112322663 , Bracket Comp Part No.-5112322785 , Chair Part No.-5112322831 , Gasket Part No.-5112322859 , Holder Part No.-5112322866 , Holder Part No.-5112322867 , Cable Holder Part No.-5112322868 , Filler Pipe Part No.-5112322904 , Spacer Part No.-5112322932 , Cardan Shaft Part No.-5112322933 , Cardan Shaft Part No.-5112322934 , Cardan Shaft Part No.-5112322935 , Cover Part No.-5112322946 , Cardan Shaft Part No.-5112322959 , Intake Hose Part No.-5112322996 , Gasket Part No.-5112323029 , Diesel Engine Part No.-5112323030 , Gasket Part No.-5112323073 , Exhaust System Part No.-5112323128 , Outlet Part No.-5112323132 , Inlet Part No.-5112323133 , Exhaust Hose Part No.-5112323135 , Screw, Hex Head Part No.-5112323136 , Lock Nut Part No.-5112323137 , Air Inlet Part No.-5112323150 , Air Inlet Part No.-5112323160 , Drainage Part No.-5112323171 , Cap Part No.-5112323182 , Fuel Hose Part No.-5112323186 , Fuel Hose Part No.-5112323187 , Inlet Port Part No.-5112323193 , Air Filter Set Part No.-5112323195 , Intake Hose Part No.-5112323196 , Restr. Washer Part No.-5112323248 , Exhaust Syst Part No.-5112323250 , Catalyser Part No.-5112323252 , Water Pump Part No.-5112323499 , Inlet Port Part No.-5112323528 , Ring Part No.-5112324048 , Compressor Part No.-5112330009 , Protection Part No.-5112330027 , Cooling Hose Part No.-5112330031 , Cooling Hose Part No.-5112330032 , Cooling Hose Part No.-5112330033 , Cooling Hose Part No.-5112330034 , Regulating U Part No.-5112330042 , Bowden Wire Part No.-5112330044 , Oil Pres.Sen Part No.-5112330110 , Lock Part No.-5112340055 , Lock Part No.-5112340056 , Fan W. Motor Part No.-5112340068 , Evaporator Part No.-5112340069 , Fan Part No.-5112340070 , Lock Part No.-5112361067 , Floor Carpet Part No.-5112370051 , Windshield W Part No.-5112370081 , Vibr. Damper Part No.-5112370093 , Cooling Hose Part No.-5112370094 , Cooling Hose Part No.-5112370095 , Cooling Hose Part No.-5112370096 , Cooling Hose Part No.-5112370097 , Coupling Hou Part No.-5112370101 , Compressor U Part No.-5112370108 , Door Part No.-5112370203 , Door Part No.-5112370204 , Guide Rail Part No.-5112380040 , Support Part No.-5112380055 , Wiper Blade Part No.-5112383067 , Wiper Arm Part No.-5112383077 , Wiper Arm Part No.-5112383078 , Parallell Ar Part No.-5112383080 , Wiper Blade Part No.-5112383082 , Level Switch Part No.-5112415989 , Gasket Part No.-5118018800 , Palm Grip Part No.-5118037806 , Relay Part No.-5118089900 , Grommet Part No.-5118090400 , Grommet Part No.-5118090500 , Länkstångshuvud Part No.-5118091000 , Coupl. List Part No.-5118092900 , Clamp Part No.-5118094500 , Plug Part No.-5118115900 , Wheel Assy Part No.-5500006200 , Coupler-Qd F Part No.-5500213000 , Coupler-Qd Part No.-5500213100 , Bushing Part No.-5500213300 , Connector (O Part No.-5500214300 , Tee Part No.-5500214800 , Nipple Part No.-5500215800 , Connector (O Part No.-5500215900 , Pipe Connection Part No.-5500216400 , Connector Part No.-5500216500 , Nipple Part No.-5500216700 , Tee Part No.-5500217100 , Nipple Part No.-5500217600 , Tee Part No.-5500218000 , Cap Part No.-5500218800 , Seal Washer Part No.-5500305700 , Washer Part No.-5500305800 , Filter Element Part No.-5500324500 , Gauge-Engine Part No.-5500324800 , Cleaner Part No.-5500345200 , Cleaner Part No.-5500345300 , Belt Set Part No.-5500365800 , Sender-Temp Part No.-5500370900 , Gasket Part No.-5500382000 , Bush/Reducer Part No.-5500405900 , Plug Part No.-5500409400 , Connector Part No.-5500440800 , Connector Part No.-5500440900 , Connector (M Part No.-5500441100 , Connector (P Part No.-5500460600 , Elbow-45 Part No.-5500462800 , Nipple Part No.-5500463800 , Nipple Part No.-5500463900 , Nipple Part No.-5500464600 , Nipple Part No.-5500464800 , Elbow-90 Part No.-5500465200 , Nipple Part No.-5500466100 , Nipple Part No.-5500468500 , Connector (O Part No.-5500472100 , Connector Part No.-5500472200 , Connector (O Part No.-5500472600 , Tee Part No.-5500475400 , Tee Part No.-5500476900 , Tee-Run (Jic/Jic/Jic) Blkhd Part No.-5500477600 , Tee Part No.-5500478000 , Tee Part No.-5500478100 , Bushing (P Part No.-5500481300 , Nipple Part No.-5500482400 , Nipple Part No.-5500484200 , Nipple Part No.-5500484400 , Elbow-90 (O-Ring/Jic) Part No.-5500485600 , Elbow-90 (O-Ring/Jic) Part No.-5500485700 , Nipple Part No.-5500485900 , Nipple Part No.-5500486100 , Nipple Part No.-5500486500 , Elbow-90 Part No.-5500486700 , Elbow-90 Part No.-5500487100 , Nipple Part No.-5500487400 , Nipple Part No.-5500487500 , Elbow-90 Part No.-5500487600 , Elbow-90 Part No.-5500488000 , Bushing Part No.-5500491100 , Bushing (P Part No.-5500491300 , Bushing Part No.-5500491500 , Bushing Part No.-5500491800 , Bushing (P Part No.-5500492400 , Plug Part No.-5500492700 , Connector Part No.-5500494000 , Connector (P Part No.-5500494600 , Nipple Part No.-5500495800 , Elbow-90 Part No.-5500496000 , Elbow-90 Part No.-5500496600 , Nipple Part No.-5500496800 , Nipple Part No.-5500497200 , Tee Part No.-5500497400 , Tee Part No.-5500497600 , Tee Part No.-5500498200 , Tee Part No.-5500498300 , Tee Part No.-5500498800 , Reducer Part No.-5500508300 , Bushing Part No.-5500508800 , Bushing (O Part No.-5500509000 , Bushing Part No.-5500509200 , Connector (P Part No.-5500510700 , Connector (P Part No.-5500510800 , Connector (P Part No.-5500510900 , Connector (P Part No.-5500511000 , Driveline Part No.-5500556600 , Press. Switch Part No.-5500560400 , Press. Switch Part No.-5500560500 , Press. Switch Part No.-5500560900 , Side Ring-Mo Part No.-5500561800 , Band Part No.-5500561900 , Driveline Part No.-5500603000 , Driveline Part No.-5500603100 , Driveline Part No.-5500607100 , Driveline Part No.-5500611000 , Driveline Part No.-5500611600 , Wear Ring Part No.-5500614200 , Slip Yoke Part No.-5500614800 , Bolt, Plate Part No.-5500652200 , Shim, Steel, Part No.-5500652300 , Shim, Steel, Part No.-5500652900 , Shim, Steel, Part No.-5500653000 , Shim, Steel, Part No.-5500653200 , Shim, Steel, Part No.-5500653300 , Shim (.040) Part No.-5500661600 , Shim (.010) Part No.-5500661800 , Shim (.005) Part No.-5500661900 , Shaft Part No.-5500668900 , Bushing, Part No.-5500679900 , Spacer Tube Part No.-5500681600 , Spacer Tube Part No.-5500681800 , Bushing-Bronze Part No.-5500682700 , Bushing Part No.-5500683100 , Bushing Part No.-5500683200 , Cylinder Part No.-5500685500 , Adapter Flange Part No.-5500687700 , Drive Plate Part No.-5112244804 , Plug Part No.-5500721200 , Plug Part No.-5500721600 , Nipple Part No.-5500728500 , Bushing Part No.-5500755900 , Bushing Part No.-5500756000 , Bushing (O Part No.-5500756100 , Seal Kit Part No.-5500756200 , Connector (O Part No.-5500756900 , Connector (O Part No.-5500757000 , Nipple Part No.-5500757300 , Connector (O Part No.-5500757400 , Nipple Part No.-5500757700 , Nipple Part No.-5500757800 , Nipple Part No.-5500758000 , Tee Part No.-5500758500 , Tee Part No.-5500758600 , Reducer (O Part No.-5500758800 , Reducer Part No.-5500759000 , Plug Part No.-5500769100 , Plug Part No.-5500788300 , Plug Part No.-5500788400 , Connector Part No.-5500925600 , Connector Part No.-5500925800 , Nipple Part No.-5500928800 , Bushing (O Part No.-5500930400 , Connector (O Part No.-5500930500 , Switch Modul Part No.-5500933600 , Purifier-Dz Part No.-5500937400 , Purifier-Dz Part No.-5500938000 , Purifier-Dz Part No.-5500938100 , Rod-Control Part No.-5500945200 , Insert Part No.-5500955200 , Insert Part No.-5500955700 , Plug Part No.-5500968800 , Couple Part No.-5501173900 , Bushing (O Part No.-5501174400 , Bushing (O Part No.-5501174500 , Bushing Part No.-5501174600 , Connector (O Part No.-5501174900 , Connector (O Part No.-5501175400 , Connector Part No.-5501175900 , Tee Part No.-5501177000 , Tee Part No.-5501177500 , Nipple Part No.-5501178000 , Nipple Part No.-5501178200 , Nipple Part No.-5501178300 , Connector Part No.-5501179600 , Connector (O Part No.-5501179800 , Connector Part No.-5501179900 , Nipple Part No.-5501181000 , Nipple Part No.-5501181100 , Nipple Part No.-5501181200 , Connector (O Part No.-5501181300 , Connector (O Part No.-5501181600 , Nipple Part No.-5501182400 , Nipple Part No.-5501183000 , Nipple Part No.-5501183100 , Nipple Part No.-5501183400 , Nipple Part No.-5501183600 , Nipple Part No.-5501183700 , Nipple Part No.-5501183900 , Nipple Part No.-5501184300 , Nipple Part No.-5501184600 , Nipple Part No.-5501184800 , Nipple Part No.-5501185800 , Nipple Part No.-5501185900 , Reducer (O Part No.-5501186400 , Plug Part No.-5501505300 , Connector Part No.-5501518200 , Tee Part No.-5501521500 , Bushing Part No.-5501523200 , Plug Part No.-5501533300 , Tee Part No.-5501536500 , Couple Part No.-5501536800 , Bushing (O Part No.-5501595000 , Plug Part No.-5501595800 , Connector (P Part No.-5501600400 , Connector (P Part No.-5501600500 , Connector (P Part No.-5501600700 , Connector (P Part No.-5501603200 , Brake Valve Part No.-5501688400 , Purifier Part No.-5501695400 , Purifier-Dz Part No.-5501695600 , Elbow-90 Part No.-5501709400 , Elbow-90 Part No.-5501709500 , Elbow-90 Part No.-5501709600 , Tube-Flex Part No.-5501849700 , Connector Part No.-5501850500 , Bronze Bushing Part No.-5502900200 , Bronze Bushing Part No.-5502900700 , Insert Part No.-5502991100 , Cover Part No.-5503164600 , Cover Part No.-5503164700 , Manifold Part No.-5503190700 , Gasket Part No.-5503232900 , Gasket Part No.-5503233200 , Cylinder Part No.-5503337600 , Connector Part No.-5503718600 , Plug Part No.-5503722500 , Plug Part No.-5503722600 , Pipe Connection Part No.-5503999700 , Connector (O Part No.-5504279800 , Connector (O Part No.-5504380200 , Bushing Part No.-5504383400 , Tip Part No.-5504484800 , Connector Part No.-5504770400 , Nipple Part No.-5504880000 , Bushing Part No.-5504909900 , Nipple Part No.-5505111200 , Elbow-45 (O-Ring/Jic) Part No.-5505347100 , Reducer Part No.-5505374300 , Nipple Part No.-5505500800 , Inst-Hose Part No.-5505628100 , Starter Part No.-5505709900 , Tee Part No.-5505748500 , Connector (O Part No.-5505751300 , Gasket Part No.-5505911500 , Nipple Part No.-5506279700 , Connector (O Part No.-5506284500 , Engine Shutd Part No.-5506338900 , Transducer A Part No.-5506656500 , Transducer A Part No.-5506761200 , Transducer A Part No.-5506761300 , Holder Part No.-5506809600 , Transducer A Part No.-5506837000 , Driveline Part No.-5506946200 , Nipple Part No.-5506953800 , Transducer A Part No.-5507021800 , Harness-Main Part No.-5507165200 , Kit-Gasket Part No.-5507254300 , Pedal-Brake Part No.-5507398800 , Trunnion Part No.-5572855100 , Connector (O Part No.-5507482200 , Battery Swit Part No.-5507496900 , Belt Kit Part No.-5507623800 , Banjo Fittin Part No.-5507656400 , Connector Part No.-5507719800 , Belt Part No.-5507751200 , Connector Part No.-5507791200 , Belt Set Part No.-5507810700 , Gasket Part No.-5507811900 , Coupler-Quic Part No.-5507824900 , Tryckstromst Part No.-5507961700 , Hose Compl. Part No.-5508184900 , Shims Part No.-5508204600 , Kit- Maint Part No.-5530005400 , Kit- Maint Part No.-5530005500 , Kit- Maint Part No.-5530005600 , Kit-Maint 25 Part No.-5530005700 , Service Kit Part No.-5530007400 , Kit-Maint 50 Part No.-5530007600 , Kit-Maint 10 Part No.-5530007700 , Pm-Consum 10 Part No.-5530007800 , Kit-Maint 50 Part No.-5530007900 , Kit-Maint 10 Part No.-5530008000 , Service Kit Part No.-5530008600 , Service Kit Part No.-5530008700 , Service Kit Part No.-5530009000 , Kit-Consum 2 Part No.-5530009100 , Kit-Consum 5 Part No.-5530009200 , Kit-Consum 1 Part No.-5530009300 , Kit-Maint 25 Part No.-5530011100 , Kit-Maint 50 Part No.-5530011200 , Kit-Maint 10 Part No.-5530011300 , Kit-Cylinder Part No.-5530023000 , Kit-Conv Rpr Part No.-5530023100 , Service Kit Part No.-5530032600 , Service Kit Part No.-5530032700 , Service Kit Part No.-5530032800 , Service Kit Part No.-5530032900 , Kit-Cylinder Part No.-5530042000 , Kit-Seal Part No.-5530048800 , Kit-Filter Part No.-5530052200 , Kit-Filter Part No.-5530052300 , Kit-Filter Part No.-5530052400 , Kit-Filter Part No.-5530053100 , Kit-Consum 1 Part No.-5530060600 , Kit-Maint 12 Part No.-5530066700 , Kit-Maint 20 Part No.-5530066800 , Kit-Maint 50 Part No.-5530067100 , Kit-Maint 10 Part No.-5530067200 , Kit-Repair Part No.-5530074200 , Kit-Maint Part No.-5530080900 , Kit-Maint Part No.-5530081000 , Kit-Maint Part No.-5530083500 , Kit-Maint 25 Part No.-5530084500 , Kit-Maint 50 Part No.-5530085500 , Capscrew Part No.-5530502100 , Capscrew Gr5 Part No.-5530502500 , Capscrew Part No.-5530504900 , Capscrew Part No.-5530505600 , Capscrew Part No.-5530509700 , Cotter Pin Part No.-5530510600 , Cotter Pin Part No.-5530511400 , Flap Cotter Part No.-5530511500 , Cotter Pin Part No.-5530512000 , Cotter Pin Part No.-5530512200 , Cotter Pin Part No.-5530513000 , Cotter Pin Part No.-5530514000 , Clevis Pin Part No.-5530516300 , Pin Part No.-5530516400 , Nipple Part No.-5530518300 , Capscrew Part No.-5530522900 , Capscrew Part No.-5530525700 , Setscrew Part No.-5530527100 , Setscr Part No.-5530528000 , Tee Part No.-5530563000 , Capscrew Part No.-5530600000 , Capscrew Part No.-5530600400 , Capscrew Part No.-5530604300 , Screw, Hex Head Part No.-5530604400 , Screw, Hex Head Part No.-5530604600 , Screw, Hex Head Part No.-5530604800 , Screw, Hex Head Part No.-5530605800 , Capscrew Part No.-5530608400 , Screw, Hex Head Part No.-5530609300 , Capscrew Part No.-5530612100 , Screw, Hex Head Part No.-5530612200 , Capscrew Part No.-5530613700 , Lock Nut Part No.-5530614900 , Hexagon Nut Part No.-5530615300 , Jam Nut Part No.-5530616300 , Jam Nut Part No.-5530617700 , Nut Part No.-5530701400 , Lock Washer Part No.-5530702700 , Lock Washer Part No.-5112246526 , Lock Washer Part No.-5530703200 , Lock Washer Part No.-5530703300 , Washer Part No.-5530705300 , Lock Nut Part No.-5530705500 , Lock Nut Part No.-5530705700 , Washer Part No.-5530706000 , Clevis Part No.-5530710300 , Locknut-Esna Part No.-5530711200 , Lock Nut Part No.-5530711600 , Clevis Part No.-5530712300 , Pin Part No.-5530712900 , Screw Part No.-5530713700 , Screw Part No.-5530714300 , Lock Nut Part No.-5530724100 , Lock Nut Part No.-5530735600 , Plug Part No.-5530736500 , Plug Part No.-5530740000 , Cotter Pin Part No.-5530740100 , Lock Washer Part No.-5530752200 , Capscrew Part No.-5530753100 , Screw, Hex Head Part No.-5530753600 , Screw Part No.-5530753900 , Capscrew Part No.-5530754900 , Lock Nut Part No.-5530755100 , Lock Nut Part No.-5530755200 , Lockwasher Part No.-5530755500 , Lock Washer Part No.-5530755600 , Screw Part No.-5530755800 , Screw Part No.-5530755900 , Plug Part No.-5530756600 , Capscrew Part No.-5530758200 , Screw Part No.-5530765200 , Capscrew Part No.-5530768600 , Lwasher-Int Part No.-5530771500 , Nut Part No.-5530772100 , Washer Part No.-5530772200 , Flatwasher Part No.-5530774200 , Lock Nut Part No.-5530776000 , Capscrew Part No.-5530777400 , Couple Part No.-5530782800 , Screw, Hex Head Part No.-5530787600 , Capscrew Part No.-5530788000 , Plug Part No.-5530789200 , Capscrew Part No.-5530807200 , Capscrew Part No.-5530814400 , Roll Pin Part No.-5530815000 , Screw Part No.-5530815100 , Washer Part No.-5530822200 , Screw Part No.-5530833200 , Capscrew Part No.-5530837500 , Screw, Hex Head Part No.-5530845800 , Capscrew Part No.-5530845900 , Screw, Hex Head Part No.-5530846500 , Capscrew Part No.-5530847200 , Screw Part No.-5530847400 , Bolt Part No.-0144328803 , Lock Nut Part No.-5530851000 , Lock Nut Part No.-5530851100 , Capscrew Part No.-5530851700 , Capscrew Part No.-5530851800 , Capscrew Part No.-5530851900 , Capscrew Part No.-5530852300 , Washer Part No.-5530854800 , Screw Part No.-5530855900 , Capscrew Part No.-5530858500 , Clevis Pin Part No.-5530860400 , Screw, Hex Head Part No.-5530864500 , Capscrew Part No.-5530864600 , Hexagon Nut Part No.-5530868800 , Capscrew Part No.-5530868900 , Screw, Hex Head Part No.-5530879900 , Capscrew Part No.-5530881700 , Lockwasher Part No.-5530889800 , Lock Washer Part No.-5530892300 , Washer Part No.-5530896400 , Capscrew Part No.-5530897100 , Nut Part No.-5530897300 , Screw, Hex Head Part No.-5530897700 , Stud-Weld Part No.-5530898500 , Hexagon Nut Part No.-5530899400 , Nut Part No.-5530901400 , Lock Washer Part No.-5530902100 , Lock Washer Part No.-5530903000 , Screw Part No.-5530905400 , Screw, Hex Head Part No.-5530907000 , Lock Nut Part No.-5530912400 , Nut Part No.-5530914300 , Nut Part No.-5530915000 , Screw, Hex Head Part No.-5530915300 , Pin-Clevis Part No.-5530918800 , Screw Part No.-5530920200 , Screw Part No.-5530921500 , Capscrew Part No.-5530921800 , Capscrew Part No.-5530923400 , Nut Part No.-5530924100 , Lock Nut Part No.-5530927300 , Screw, Hex Head Part No.-5530927700 , Capscrew-Hex Hd Part No.-5530933200 , Hexagon Nut Part No.-5530948500 , Hex Screw Part No.-5530952400 , Roll Pin Part No.-0108169144 , Lockwasher Part No.-5530959000 , Lock Washer Part No.-5530959100 , Lock Nut Part No.-5530964500 , Lock Nut Part No.-5530964800 , Lock Nut Part No.-5530966100 , Nipple Part No.-5530973200 , Capscrew Part No.-5530978200 , Screw, Hex Head Part No.-5530982100 , Screw, Hex Head Part No.-5530983600 , Screw Part No.-5530986800 , Capscrew Part No.-5530988000 , Coupling Part No.-5530989300 , Capscrew Part No.-5530992700 , Screw, Hex Head Part No.-5530999500 , Screw, Hex Head Part No.-5530999600 , Lock Nut Part No.-5531006000 , Screw, Hex Head Part No.-5531009700 , Lock Nut Part No.-5531012700 , Lock Nut Part No.-5531012800 , Lock Nut Part No.-5531013500 , Lock Nut Part No.-5531013600 , Capscrew Part No.-5531019900 , Screw, Hex Head Part No.-5531020300 , Screw, Hex Head Part No.-5531022800 , Capscrew Part No.-5531024800 , Screw, Hex Head Part No.-5531025500 , Capscrew Part No.-5531028000 , Capscrew Part No.-5531028100 , Screw Part No.-5531028400 , Screw, Hex Head Part No.-5531028500 , Screw, Hex Head Part No.-5531041700 , Screw, Hex Head Part No.-5531060300 , Flange Screw Part No.-5531066700 , Flange Nut Part No.-5531068600 , Clevis Pin Part No.-5531070700 , Clamp Part No.-5531075200 , Screw, Hex Head Part No.-5531076500 , Washer Part No.-5531077800 , Locknut Part No.-5531078300 , Lock Nut Part No.-5531080000 , Screw, Hex Head Part No.-5531084500 , Capscrew Part No.-5531085400 , Capscrew Part No.-5531088000 , Mtg Band Part No.-5532507900 , Quad Ring Part No.-5532520800 , Wiper-Bonded Part No.-5532521200 , Screw Part No.-5532526700 , Nut Part No.-5532527000 , Washer Part No.-5532528700 , O-Ring Part No.-5532532400 , Washer Part No.-5532534500 , Spring Part No.-5532536300 , Spring Part No.-5532536700 , Ring Part No.-5532539600 , Valve, Check Part No.-5532816800 , Valve Part No.-5532817900 , Aeration Nipple Part No.-5532823700 , Switch Part No.-5532850600 , Cap Part No.-5532853300 , Strainer Part No.-5532853400 , Seal Part No.-5532858900 , Coupler Part No.-5532868600 , Column Part No.-5532902500 , Rod End Part No.-5532920400 , Valve, Large Part No.-5532934700 , Seal Part No.-5532961400 , Flap Cotter Part No.-5532998400 , Ball Part No.-5533009100 , Ball Part No.-5533009300 , Ball Part No.-5533009700 , Spider Part No.-5533013600 , Washer Part No.-5533014900 , Deflector Part No.-5533016100 , Nut Part No.-5533018900 , Washer Part No.-5533029300 , Dowel Part No.-5533031100 , Washer Part No.-5533037000 , O-Ring Part No.-5533037900 , O-Ring Part No.-5533038300 , Flange Part No.-5533040600 , Roller Part No.-5533045000 , Washer Part No.-5533045900 , Washer Part No.-5533057400 , Washer Part No.-5533057800 , Spacer Part No.-5533058000 , Pipe Plug Part No.-5533073900 , Bolt Part No.-5533077300 , Spider Part No.-5533077700 , Retaining Nut Part No.-5533079300 , Seal Part No.-5533084700 , Washer Part No.-5533086500 , Bearing Cage Assembly Part No.-5533086900 , Seal Part No.-5533100200 , Spider & Brg Part No.-5533101500 , Spider & Brg Part No.-5533102300 , Brass Washer Part No.-5533111200 , Stud Part No.-5533119100 , Spacer Part No.-5533128500 , Lock Part No.-5533129000 , O Ring Part No.-5533129400 , Dowel Part No.-5533131200 , Stud Part No.-5533146300 , Stud Part No.-5533149500 , Breather Part No.-5533150500 , Valve Part No.-5533216800 , Plug Part No.-5533221000 , Bushing Part No.-5533245400 , O-Ring Part No.-5533272100 , O-Ring Part No.-5533272700 , O-Ring Part No.-5533272800 , O-Ring Part No.-5533273300 , O-Ring Part No.-5533273600 , O-Ring Part No.-5533274000 , O-Ring Part No.-5533275100 , Bushing Part No.-5533288300 , Cover Part No.-5533291000 , Gasket Part No.-5533291100 , Stud Part No.-5533296300 , Stud Part No.-5533298700 , Seal Part No.-5533300900 , Screw Part No.-5533310300 , Spring Part No.-5533323900 , Stud Part No.-5533324000 , Impeller Part No.-5533324500 , Hub-Impeller Part No.-5533324700 , Hub Part No.-5533324800 , Washer Part No.-5533325200 , Pump Drive Part No.-5533325400 , Support Assy Part No.-5533325500 , Shaft Part No.-5533325600 , Output Shaft Part No.-5533325900 , Valve Part No.-5533326400 , Seat Part No.-5533326600 , Gasket Part No.-5533326700 , Gear Part No.-5533326900 , Lock Ring Part No.-5533327000 , Ring Part No.-5533327100 , Ring Part No.-5533327200 , Bearing Part No.-5533327300 , Adapter Part No.-5533327700 , Flange Part No.-5533327800 , Bearing Part No.-5533327900 , Retainer Ring Part No.-5533331200 , Cover Part No.-5533334500 , Piston Ring Part No.-5533334700 , Ring Part No.-5533335000 , Support Assy Part No.-5533335100 , Piston Sleev Part No.-5533335400 , End Plate Part No.-5533335500 , Piston Part No.-5533335600 , Bearing Part Part No.-5533336400 , End Plate Part No.-5533336800 , Piston Part No.-5533337000 , Gear Part No.-5533338300 , Gear Part No.-5533338400 , Piston Ring Part No.-5533338500 , Ring Part No.-5533338700 , Flange Part No.-5533339500 , Flange Part No.-5533340000 , Cap Part No.-5533340100 , Bearing Cap Part No.-5533340200 , Gasket Part No.-5533340300 , Spacer Part No.-5533340400 , Spacer Part No.-5533340500 , Spacer Part No.-5533340600 , Baffle Ring Part No.-5533341100 , Oil Pan Part No.-5533342700 , Oil Baffle Part No.-5533344900 , Spring Part No.-5533345000 , Cover Part No.-5533345700 , Capseal Assy Part No.-5533346300 , Cover Plate Part No.-5533346600 , Spool Part No.-5533347100 , Spring Part No.-5533347200 , Spring Part No.-5533347500 , Spring Part No.-5533347600 , Valve Part No.-5533347700 , Spacer Part No.-5533347900 , Gasket Part No.-5533348000 , Washer Part No.-5533348200 , Cap Shim Part No.-5533348500 , Cap Shim Part No.-5533348600 , Cap Shim Part No.-5533348700 , Shim-Cap Part No.-5533348800 , Shim-Cap Part No.-5533348900 , Shim-Cap Part No.-5533349000 , Ring Part No.-5533349100 , Cover Clutch Part No.-5533350700 , Frame Gasket Part No.-5533353300 , Output Shaft Part No.-5533353600 , Lock Part No.-5533353700 , Disk Part No.-5533353900 , Backing Pl Part No.-5533354000 , Turbine Part No.-5533354200 , Baffle Part No.-5533354300 , Ring Part No.-5533354400 , Sleeve Part No.-5533354600 , Shaft Part No.-6060008772 , Output Shaft Part No.-5533354800 , Lube Tube Part No.-5533354900 , Spacer Part No.-5533355000 , Shim Part No.-5533355100 , Shim Part No.-5533355200 , Shim Part No.-5533355300 , Shim Part No.-5533355400 , Shim Part No.-5533355500 , Shim Part No.-5533355600 , O-Ring Part No.-5533356500 , O-Ring Part No.-5533356800 , Link Part No.-5533356900 , Spacer Part No.-5533357000 , Cap Part No.-5533357100 , Retainer Part No.-5533357300 , Bearing Cap Part No.-5533357700 , Stop Part No.-5533368900 , Dowel Pin Part No.-5533370800 , Turbine Part No.-5533372000 , Plate-Lock Part No.-5533372200 , Plate-Lock Part No.-5533372500 , Baffle Plate Part No.-5533372600 , Oil Tube Part No.-5533372800 , Washer Part No.-5533373100 , Control Valv Part No.-5533373200 , Sleeve Part No.-5533373300 , Washer Part No.-5533373900 , Flange Assy Part No.-5533374500 , Spring Part No.-5533375400 , Plunger Part No.-5533375500 , Turbine Part No.-5533377300 , Cover Part No.-5533378400 , Gasket Part No.-5533378500 , Snap Ring Part No.-5533382000 , Ring Part No.-5533382200 , Ring Part No.-5533382800 , Ring Part No.-5533382900 , Ring-Snap Part No.-5533383000 , Ring Part No.-5533383400 , Ring Part No.-5533383500 , Ring Part No.-5533383600 , Ring Part No.-5533384100 , Snap Ring Part No.-5533384500 , Ring Part No.-5533384600 , Ring-Snap Part No.-5533384800 , Ring Part No.-5533385300 , Ring Part No.-5533385700 , Spring Part No.-5533386200 , Piston Part No.-5533386300 , Ring Part No.-5533386600 , Disc-Clutch Part No.-5533386700 , End Plate Part No.-5533386800 , Bearing Assy Part No.-5533395700 , Bearing Part No.-5533398500 , Bearing Part No.-5533398700 , Bearing Part No.-5533400100 , Bearing Part No.-5533400200 , Bearing Part No.-5533400300 , Cover Part No.-5533404400 , Gasket Part No.-5533404700 , Spring Part No.-5533405100 , Plug Part No.-5533405200 , Plug Part No.-5533405300 , Plug Part No.-5533405400 , Disc-Inner Part No.-5533405500 , Plug Part No.-5533406100 , Valve Part No.-5533406200 , Valve Part No.-5533409000 , Valve Part No.-5533409100 , Valve Part No.-5533410900 , Spacer Part No.-5533415000 , Ring-Seal Part No.-5533417600 , Plug Part No.-5533459100 , Solenoid Part No.-5533464900 , O-Ring Part No.-5533494100 , Yoke Part No.-5533500100 , Governor Part No.-5533530000 , Valve Part No.-5533547100 , Valve Part No.-5533547800 , Bleeder Screw Part No.-5533549600 , Yoke Part No.-5533603600 , Cushion-Seat Part No.-5533604000 , Back-Seat Part No.-5533604100 , Lock Nut Part No.-5533608800 , Cup-Brg Part No.-5533612200 , Cone-Rlr Brg Part No.-5533613000 , Cup Part No.-5533614900 , Inflating Device Part No.-5533615200 , Plug Part No.-5533626900 , Stud Part No.-5533632700 , Seat Part No.-5533639200 , Poppet Part No.-5533639400 , Valve Part No.-5533643800 , Charging Pump Part No.-5541743200 , Cup Part No.-5533654300 , Gauge Part No.-5533661500 , Filler Part No.-5533680100 , Knob Part No.-5533684100 , Plunger Part No.-5533690700 , Yoke Part No.-5533734800 , Washer Part No.-5533745600 , Pin Part No.-5533753900 , Spring Part No.-5533756500 , Lock Pin Part No.-5533765800 , Pin Part No.-5533766100 , Bearing Cup Part No.-5533772900 , Drain Plug Part No.-5533790800 , Bearing Part No.-5533799100 , Ring-Snap Part No.-5533804500 , Kit-Spacer Part No.-5533814000 , Spacer-Ring Part No.-5533820600 , Strainer Part No.-5533832500 , Clamp Part No.-5533854300 , Pin Part No.-5533900600 , O-Ring Part No.-5533908900 , O-Ring Part No.-5533909600 , O-Ring Part No.-5533910000 , Valve Part No.-5533931700 , Housing Part No.-5533958800 , Dip Stick Part No.-5533958900 , Spring Part No.-5533959700 , Seal Part No.-5533960300 , Bearing Part No.-5533960400 , Bearing Part No.-5533960700 , Bearing Part No.-5533960800 , Ring-Snap Part No.-5533960900 , Spacer Part No.-5533961200 , Disc Part No.-5533961300 , Ring Part No.-5533962400 , Bearing Part No.-5533962500 , Valve Part No.-5533963000 , Gasket Part No.-5533963500 , Stud Part No.-5533963600 , Flange-6C Part No.-5533964600 , Spool Part No.-5533964800 , Spool Part No.-5533964900 , Plate Part No.-5533965000 , Spring Part No.-5533965200 , Gasket Part No.-5533965800 , Gasket Part No.-5533966100 , Screen Part No.-5533966300 , Ring Part No.-5533966400 , Bearing Assy Part No.-5533966500 , Bearing Part No.-5533966700 , Gasket Part No.-5533966900 , Nut Part No.-5533967100 , Oil Seal Part No.-5533967300 , Flange-7C Part No.-5533967500 , Gasket Part No.-5533967600 , Spacer Part No.-5533967800 , Spacer Part No.-5533967900 , Retainer Part No.-5533968100 , Retainer Part No.-5533968200 , Piston Ring Part No.-5533969000 , Disc Part No.-5533969200 , Disc Part No.-5533969700 , O-Ring Part No.-5533970400 , Bolt Part No.-5533971000 , Bearing Part No.-5533972900 , Pin Part No.-5533973100 , Pin Part No.-5533973200 , Seal Part No.-5533974000 , Kit-Seal Part No.-5533980700 , Capscrew Part No.-5533993700 , Lock Washer Part No.-5533996300 , Pin Part No.-5533997600 , Plug Part No.-5533997900 , Cap Part No.-5533999000 , Elbow Part No.-5533999200 , Adapter Part No.-5533999400 , Plug Part No.-5534000800 , O-Ring Part No.-5534001500 , O-Ring Part No.-5534001700 , O-Ring Part No.-5534012000 , O-Ring Part No.-5534012500 , O-Ring Part No.-5534013400 , O-Ring Part No.-5534014300 , O-Ring Part No.-5534014400 , O-Ring Part No.-5534014600 , O-Ring Part No.-5534014800 , O-Ring Part No.-5534015400 , Kit-Seal Part No.-5534026500 , Kit-Seal Part No.-5534027200 , Clamp Part No.-5534037400 , Gasket Part No.-5534039000 , Valve Part No.-5534039500 , Diaphragm Part No.-5534050000 , Bearing Part No.-5534069700 , Cup Part No.-5534083700 , Cone Part No.-5534083800 , Cone-Brg Part No.-5534087100 , Cone-Rlr Brg Part No.-5534087200 , Cup Part No.-5534087300 , Cone-Rlr Brg Part No.-5534087400 , Cup Part No.-5534088900 , Cone Part No.-5534089000 , Bearing Cup Part No.-5534089400 , Bearing Cone Part No.-5534089500 , Seal Part No.-5534115300 , Stud Part No.-5534119100 , Dowel Part No.-5534120300 , Stud Part No.-5534128200 , Diff Spider Part No.-5534128600 , Shim-0.007 Part No.-5534131800 , Shim-0.010 Part No.-5534131900 , Shim-0.020 Part No.-5534132000 , Spring Part No.-5534133400 , Seal Part No.-5534136100 , Ring Part No.-5534138800 , Ring Kit Part No.-5534140500 , Nut Part No.-5534143400 , Stud Part No.-5534144100 , Spacer Part No.-5534144300 , Gasket Part No.-5534145100 , Ring Part No.-5534145700 , Spring Part No.-5534147600 , Gasket Part No.-5534147800 , Spring Part No.-5534148100 , Cap Part No.-5534148900 , Bearing Cap Part No.-5534149000 , Plate Part No.-5534149100 , Plate Part No.-5534149200 , Hub Part No.-5534149300 , Adapter Part No.-5534149800 , Drain Cock Part No.-5534170600 , Mount Shock Part No.-5534193400 , Socket Part No.-5534198300 , Diode Part No.-5534198700 , Spider & Brg Part No.-5534200300 , Ring Part No.-5534221300 , Ring Part No.-5534221600 , Ring Part No.-5534221700 , Lock Ring Part No.-5534223100 , Valve-Check Part No.-5534241600 , Bearing Part No.-5534250300 , Bearing Part No.-5534251000 , Bearing Part No.-5534251800 , Seal Part No.-5534252600 , Spring Part No.-5534252900 , Valve Part No.-5534253100 , Housing Part No.-5534253900 , Gauge (Tool) Part No.-5534272700 , Pressure Gauge (5000 Psi) Part No.-5534273800 , Ring Part No.-5534273900 , Bearing Part No.-5534275100 , Element Part No.-5534279900 , Knob Part No.-5534285100 , Kit Part No.-5534301200 , Bearing Part No.-5534319500 , Bearing Part No.-5534321900 , Bearing Part No.-5534322000 , Pin Part No.-5534341300 , Valve-Reg Part No.-5534374100 , Breather Part No.-5534375900 , Cylinder Part No.-5534378600 , Tube Part No.-5534409200 , Valve Part No.-5541906600 , Spool Part No.-5534409900 , Spider & Brg Part No.-5534424800 , Cup Part No.-5534501000 , Baffle Part No.-5534501200 , Clamp Part No.-5534533000 , Stud Part No.-5534543900 , Rod End Part No.-5534552000 , Nut Lock Part No.-5534559300 , Seal Part No.-5534559900 , Bearing Part No.-5534560000 , Bearing Part No.-5534560600 , Kit-Snapring Part No.-5534561000 , O-Ring Part No.-5534563300 , Seal Part No.-5534563400 , Grip Part No.-5534570600 , Switch Part No.-5534574300 , Bearing Part No.-5534578700 , Ring Part No.-5534581300 , Ring Part No.-5534618900 , Ring Part No.-5534619000 , Gasket Part No.-5534636700 , Tube Part No.-5534644100 , Plate Part No.-5534645900 , Shaft Part No.-5534646600 , Lock Washer Part No.-5534665400 , Plug Part No.-5534671300 , Seal Part No.-5534673800 , Valve Part No.-5534718200 , Pin-Roll Part No.-5534719100 , Spacer Part No.-5534720500 , Dipstick Part No.-5534723000 , Pin Shaft Part No.-5534723800 , Flange Part No.-5534725600 , Housing Part No.-5534736000 , Term Ring Part No.-5534744600 , Stud Part No.-5534746400 , Cap Screw Part No.-5534747200 , Plate-Mount Part No.-5534788300 , Sealing Plug Part No.-5534825300 , Seal Part No.-5534825400 , Cable Lug Part No.-5534826000 , Cable Lug Part No.-5534826100 , Recep Connector Part No.-5534826200 , Cable Lug Part No.-5534826600 , Cable Lug Part No.-5534827300 , Plug Part No.-5534828500 , Stud Part No.-5534835600 , Receptacle Part No.-5534837700 , Plug Part No.-5534838300 , Gauge Part No.-5534843600 , Press Switch Part No.-5534843900 , Lock Washer Part No.-5534844200 , Receptacle Part No.-5534845200 , Cable Lug Part No.-5534868900 , Term Ring Part No.-5534869100 , Ext Valve Stem Part No.-5534877500 , Valve Part No.-5534877800 , Clamp Part No.-5534887800 , Spider & Brg Part No.-5534888400 , Cable Lug Part No.-5534898800 , Pressure Switch Part No.-5534903100 , Gauge Part No.-5534921400 , Cable Lug Part No.-5534941100 , Rod End Part No.-5534943500 , Bulb Part No.-5534961800 , Sender-Tempe Part No.-5535002900 , Term Ring Part No.-5535010200 , Kit-Cylinder Part No.-5535029700 , Clamp Part No.-5535033100 , Term Ring Part No.-5535033600 , Plug Part No.-5535047300 , Seal Part No.-5535052200 , Bearing Part No.-5535052800 , Housing Assy Part No.-5535068600 , Tube Part No.-5535068800 , Distr-Oil Part No.-5535068900 , Washer Part No.-5535069300 , Plug Part No.-5535069900 , Cap Part No.-5535086700 , Sender-Temp Part No.-5535100500 , Clamp Part No.-5535101600 , Valve Part No.-5535110400 , Kit-Seal Part No.-5535113900 , Gear Part No.-5535115000 , Bearing Part No.-5535115100 , Connector Part No.-5535117100 , Tool Part No.-5535141300 , Tool Part No.-5535141400 , Tool Part No.-5535141500 , Cable Lug Part No.-5535144800 , Gasket Part No.-5535145200 , Contact Housing Part No.-5535164600 , Cable Lug Part No.-5535165000 , Cap Part No.-5535165200 , Contact Housing Part No.-5535165400 , Term Ring Part No.-5535167800 , Kit-Cylinder Part No.-5535180900 , Sleeve Part No.-5535193900 , Term Ring Part No.-5535225100 , Spring Part No.-5535241100 , Fuse Part No.-5535243800 , Valve Part No.-5535265200 , Element Part No.-5535271600 , Relief Valve Part No.-5535277600 , Fitting Part No.-5535279000 , Restrictor Part No.-5535279500 , Pin-Q/R 1/4_ Part No.-5535280600 , Seal Part No.-5535284400 , Kit-Cylinder Part No.-5535297200 , Breaker Part No.-5535302000 , Stud Part No.-5535304300 , Oil Seal Part No.-5535316600 , Gasket Part No.-5535321300 , Gasket Part No.-5535321400 , O-Ring Part No.-5535336100 , Window Part No.-5535336200 , Kit Part No.-5535336300 , O-Ring Part No.-5535337800 , Plug Part No.-5535337900 , O-Ring Part No.-5535338000 , Seal Part No.-5535338300 , O-Ring Part No.-5535339000 , Rod End Part No.-5535344400 , Valve-Cushio Part No.-5535350200 , Block Part No.-5535378800 , Support Assy Part No.-5535392700 , Cup-Bearing Part No.-5535392800 , Cone-Bearing Part No.-5535392900 , Bearing Part No.-5535393100 , Bearing Part No.-5535393200 , Nut Part No.-5535402200 , Fuse Part No.-5535414500 , Connector-Y -Female Part No.-5535433800 , Spider/Brg Part No.-5535437300 , Kit-Seal Part No.-5535441500 , Bearing Part No.-5535450300 , Bearing Part No.-5535450400 , Kit-Packing Part No.-5535454200 , Filter Part No.-5535455700 , Head Part No.-5535482900 , Hydraulic Pump Part No.-5535491500 , Cable Part No.-5535491800 , Holder Part No.-5535497300 , Kit-Seal Part No.-5535497400 , O-Ring Part No.-5535508500 , Sleeve Part No.-5535509900 , Pump Drive Part No.-5535510100 , Kit O-Ring Part No.-5535511000 , Drum Assy Part No.-5535511400 , Bearing Part No.-5535511500 , Term Ring Part No.-5535515900 , Term Ring Part No.-5535516300 , Term Ring Part No.-5535516400 , O-Ring Part No.-5535518200 , Cartridge Part No.-5535518400 , O-Ring Part No.-5535518500 , O-Ring Part No.-5535519800 , Bearing Assy Part No.-5535530200 , Spider Brg Part No.-5535542400 , Yoke Part No.-5535550000 , Spider Bearing Part No.-5535552200 , Piston Ring Part No.-5535553100 , Spring Part No.-5535553200 , Plug Part No.-5535554200 , Yoke Part No.-5535561200 , Mount Part No.-5535562400 , Press Switch Part No.-5535562900 , Filter Part No.-5535570000 , Element Assembly Part No.-5535570100 , Seal Part No.-5535570300 , Seal Part No.-5535570400 , Clamp Part No.-5535574900 , Rod Part No.-5535576600 , Body-Valve Part No.-5535576800 , Clamp Part No.-5535577200 , Seal Part No.-5535583200 , Gasket Part No.-5535620700 , Belt Kit Part No.-5535625000 , Yoke-Slip Part No.-5535628300 , Bulb-24V Part No.-5535650900 , O-Ring Part No.-5535690800 , Bearing Part No.-5535692100 , Gauge Part No.-5535692800 , Spider Brg Part No.-5535720800 , Spider Brg Part No.-5535720900 , Cross Part No.-5535721000 , Valve-Check Part No.-5535721900 , Roller Brg Part No.-5535749900 , O-Ring Part No.-5535780200 , Housing Part No.-5535803900 , Clamp Part No.-5535842600 , Motor Part No.-5535858900 , Circuit Breaker Part No.-5535863300 , Valve Part No.-5535885900 , Column Part No.-5535886600 , Ring-Back Up Part No.-5535905800 , Flange Screw Part No.-5535915800 , Ring-Sealing Part No.-5535930100 , Plug Part No.-5535930800 , Ring Part No.-5535938300 , O-Ring Part No.-2650717743 , Snap Ring Part No.-5535956300 , Clamp Part No.-5535958100 , Seal Part No.-5535969800 , Valve Part No.-5535985500 , Baffle Plate Part No.-5536006400 , Sheave Part No.-5536057300 , Sleeve Part No.-5536079200 , Bearing Assy Part No.-5536088300 , Gasket Part No.-5536089500 , Ring Part No.-5536104300 , Filter Part No.-5536111800 , Element Part No.-5536132100 , Element Part No.-5536132200 , Nut Part No.-5536132300 , Clip Part No.-5536132400 , Check Part No.-5536140600 , Washer-Brg Part No.-5536154400 , Valve Part No.-5536162400 , Capscrew Part No.-5536163600 , Ring Part No.-5536168100 , Yoke Part No.-5536172500 , Flange Part No.-5536178900 , Cylinder Part No.-5536180400 , Rod End Part No.-5536182400 , Bearing Part No.-5536192700 , Flange Screw Part No.-5536193100 , Cylinder Part No.-5536209100 , Gauge Part No.-5536213600 , Grommet Part No.-5536240300 , Seal, Hub Part No.-5536250200 , Kit-Seal Part No.-5536261100 , Seal Part No.-5536272600 , Washer Part No.-5536272800 , Clamp Part No.-5536278500 , U Bolt Part No.-5536280900 , Stud Part No.-5536313300 , Cable Control Part No.-5536323600 , Sleeve Part No.-5536330500 , Light-24V Part No.-5536330900 , Term Sock Part No.-5536342600 , Hydraulic Pump Part No.-5536364700 , Cover Part No.-5536369000 , Relief Valve Part No.-5536369500 , Retainer Part No.-5536369700 , O-Ring Part No.-5536370000 , Spring Part No.-5536370900 , Ring-Seal Part No.-5536379900 , Spacer Part No.-5536380800 , Pressure Pl Part No.-5536382000 , Piston Brake Part No.-5536382100 , Clevis Part No.-5536384400 , Clamp Part No.-5536385800 , Sealing Ring Part No.-5536388700 , Valve-Pilot Part No.-5536402000 , O-Ring Part No.-5536409100 , O-Ring Part No.-5536409700 , Sleeve Part No.-5536426900 , Flange Brg Part No.-5536429500 , Gauge Part No.-5536435000 , Plug Part No.-5536442500 , Switch Part No.-5536445000 , Capscrew Part No.-5536452100 , Switch-Grn Part No.-5536457400 , Switch Part No.-5536457500 , Bearing Part No.-5536476500 , Seal Part No.-5536478900 , Plug Part No.-5536489200 , Pump/Valve Part No.-5536490900 , Separator Part No.-5536507800 , Stud Part No.-5536530200 , Spring Part No.-5536532900 , Spring Part No.-5536533000 , Disc Part No.-5536533200 , Plug Part No.-5536534900 , O-Ring Part No.-5536535200 , Valve-3 Way Part No.-5536538700 , Ring Seal Part No.-5536540900 , Bearing Part No.-5536544600 , Bulb Part No.-5536561300 , Locknut Part No.-5536576600 , Roller Part No.-5536578500 , Seal Part No.-5536610500 , Valve Part No.-5536628500 , Sleeve Part No.-5536630000 , Plate Part No.-5536634000 , Roller Part No.-5536634800 , Cone Part No.-5536636000 , Spring Part No.-5536660500 , Yoke Part No.-5536661300 , Retainer Part No.-5536679000 , Handle Part No.-5536679900 , Spring Part No.-5536691600 , Screw Part No.-5536710800 , Ring Part No.-5536710900 , Impeller Part No.-5536711000 , O-Ring Part No.-5536711100 , End Plate Part No.-5536713300 , Disc-Inner Part No.-5536713400 , Valve-Press Part No.-5536720000 , Cylinder Part No.-5536727500 , Valve-Relief Part No.-5536730800 , Motor Part No.-5536758600 , Sleeve Assy Part No.-5536758800 , Bearing Part No.-5536760200 , Flex Cplg Part No.-5536767700 , Service Kit Part No.-5536776100 , Bracket Part No.-5536782600 , Wiper Part No.-5536790900 , Pump Part No.-5536796700 , Impeller Part No.-5536803300 , Screen Part No.-5536803700 , Bearing Part No.-5536803800 , Pin Part No.-5536804400 , Kit-Seal Part No.-5536823400 , Kit-Repair Part No.-5536836300 , Sprocket Part No.-5536843000 , Manifold Block Part No.-5536843400 , Hydraulic Pump Assembly Part No.-5536847400 , Kit-O-Rings Part No.-5536860300 , Kit Part No.-5536864200 , Filter Part No.-5536866100 , Ball Bushing Part No.-5536904500 , Nut Part No.-5536913200 , Spring Part No.-5536920200 , Spool Part No.-5536920600 , Bearing Part No.-5536924400 , Seal Part No.-5536947200 , Bleeder Screw Part No.-5536953400 , Kit- O-Ring Part No.-5536954300 , Connection Part Part No.-5536974300 , Kt-Gskt/Seal Part No.-5536982500 , Kit Part No.-5536983000 , O-Ring Part No.-5536988100 , Seal Part No.-5536988800 , Kit-Sealing Part No.-5536990500 , Body Assembly Part No.-5536993200 , No Spin Assy Part No.-5536996600 , Gear Part No.-5536996900 , Flange Part No.-5536998300 , Bracket Part No.-5537001300 , Clamp Part No.-5537001800 , Clamp Part No.-5537001900 , Clamp Part No.-5537002000 , Control Cable Part No.-5537002300 , Cylinder Part No.-5537002800 , Clamp Part No.-5537011700 , Sprocket Part No.-5537012300 , Turbine Part No.-5537013800 , U-Ring Part No.-5537015300 , Valve Part No.-5537023900 , Pump, Tandem Part No.-5537039400 , Sleeve Assy Part No.-5537039600 , Gear Part No.-5537041400 , Retainer Part No.-5537042700 , Spool Part No.-5537043400 , Seal V Ring Part No.-5537050400 , Gear Part No.-5537051100 , Spring Part No.-5537052000 , Spring Part No.-5537052100 , Spring Part No.-5537052200 , Nut Part No.-5537053000 , Expand Tube Part No.-5537055800 , Ring Part No.-5537055900 , Ring-Piston Part No.-5537056000 , Ring Part No.-5537056100 , Valve Part No.-5537065700 , Valve Part No.-5537070100 , Spring Part No.-5537098600 , Spring Part No.-5537098700 , Pump-Hydraul Part No.-5537107700 , Driveline Part No.-5537107800 , Bearing Part No.-5537107900 , Clamp Part No.-5537113600 , Pin Part No.-5537118900 , Valve-Accum Part No.-5537132100 , Charging Harness Part No.-5537133500 , Ring Part No.-5537134600 , Reducer Part No.-5537135600 , Rod End Part No.-5537144300 , Seal Part No.-5537148100 , Selector Valve Part No.-5537148800 , Bearing Part No.-5537154000 , Shim Part No.-5537154500 , Shim Part No.-5537154600 , Shim Part No.-5537154700 , Gear Part No.-5537154800 , Cone Part No.-5537155000 , Baffle Part No.-5537155200 , Baffle Part No.-5537155300 , Cup Part No.-5537155400 , Cone Part No.-5537155500 , Shaft Part No.-5537155600 , Clutch Cover Part No.-5537155700 , Bearing Part No.-5537155800 , Gear Part No.-5537156000 , Pin Lock Part No.-5537156200 , Frame Part No.-5537156400 , Gear Part No.-5537156500 , Cone Part No.-5537158300 , Disc-Spring Part No.-5537158600 , Pin-Spring Part No.-5537158700 , Piston Part No.-5537158800 , Seal Part No.-5537158900 , Seal Part No.-5537159000 , Sleeve Part No.-5537159400 , Flange Part No.-5537159500 , Seal Hub Part No.-5537161000 , Pressure Switch Part No.-5537162400 , Press Switch Part No.-5537162500 , Lock Ring Part No.-5537168500 , Side Ring Part No.-5537168600 , Seat Part No.-5537168700 , Lockring Part No.-5537168800 , Lock Ring Part No.-5537169000 , Side Part No.-5537169100 , Flasher Part No.-5537169700 , Valve Part No.-5537170200 , Radiator Cap Part No.-5537170800 , Cylinder Part No.-5537175100 , Plate Part No.-5537177800 , Steel Ball Part No.-5537177900 , Bearing Part No.-5537178000 , Bearing Part No.-5537178200 , Retainer Part No.-5537178300 , Seal-Outer Part No.-5537178600 , Bearing Part No.-5537179400 , Spacer Part No.-5537179700 , Shaft Part No.-5537179800 , Cap Part No.-5537179900 , No Spin Assy Part No.-5537182200 , Nozzle Part No.-5537190600 , Bearing Part No.-5537192000 , Repair Kit Part No.-5537193100 , Seal Part No.-5537199600 , Seal-Grease Part No.-5537199700 , Pedal Attachm. Part No.-5537204700 , Spring Part No.-5537207000 , O-Ring Part No.-5537207100 , Seal-Piston Part No.-5537207300 , Seal-Piston Part No.-5537207400 , Seal Part No.-5537208700 , Eye Part No.-5537247300 , Push Rod Part No.-5537258800 , Sleeve Part No.-5537259200 , Valve Part No.-3115026200 , Protection Part No.-5537262200 , Roller Part No.-5537262600 , Pedal Part No.-5537262700 , Gear Part No.-5537271000 , Valve Part No.-5537273000 , Washer Part No.-5537274400 , Lamp-24V Part No.-5537275200 , Reducer Part No.-5537277300 , Pin Seal Part No.-5537288200 , Light Switch Part No.-5537288500 , Switch Part No.-5537289200 , Terminal Blc Part No.-5537289700 , Clevis Part No.-5537292600 , Pin Part No.-5537292800 , Bushing Part No.-5537292900 , Bushing Part No.-5537293000 , Spring Part No.-5537293100 , Spring Part No.-5537293200 , Pedal Part No.-5537294000 , Rod Part No.-5537294500 , Repair Kit Part No.-5537296100 , Valve-Press Part No.-5537297900 , Seal Part No.-5537301700 , Switch Part No.-5537302100 , Switch Part No.-5537302200 , Rubber Cap Part No.-5537302300 , Circuit Breaker Part No.-5537302900 , Valve-Press Part No.-5537307100 , Nipple Part No.-5537309200 , Nut Part No.-5537318200 , Kit-Seal Part No.-5537318400 , Ring Part No.-5537318800 , Relief Valve Part No.-5537321000 , Relief Part No.-5537321100 , Seal Part No.-5537327100 , Retainer Part No.-5537327200 , Sleeve Part No.-5537327600 , Gasket Part No.-5537327800 , Ring-Backup Part No.-5537335000 , Poppet Part No.-5537337600 , O-Ring Part No.-5537337800 , Cap Part No.-5537337900 , Nipple Part No.-5537341800 , Cap Part No.-5537341900 , Guide Part No.-5537343600 , Piston Part No.-5537343700 , Cap Stop Part No.-5537343800 , Spacer Part No.-5537343900 , Spring Part No.-5537344000 , Sleeve Part No.-5537344100 , Cover Part No.-5537344300 , Hexagon Nut Part No.-5537344800 , Pivot Part No.-5537345300 , Cover Part No.-5537345400 , Valve Part No.-5537353500 , Kit-Accum Part No.-5537360600 , Control Cove Part No.-5537361000 , Ring Part No.-5537361300 , Clip Part No.-5537373500 , Clip Part No.-5537373600 , Charging Valve Part No.-5537379400 , Gauge Part No.-5537381800 , Runner Part No.-5537386300 , Term Ring Part No.-5537386500 , Brass Plug Part No.-5537387900 , Isolator-Vib Part No.-5537392700 , Disc-Outer Part No.-5537393200 , Disc-Inner Part No.-5537393300 , Spacer Part No.-5537393800 , Spacer Part No.-5537394000 , Pocket Seal Strip Part No.-5537403700 , Cartridge Part No.-5537423100 , Kit-Seal Part No.-5537423300 , Kit-Seal Part No.-5537423400 , Manifold Part No.-5537423600 , Plug Part No.-5537428400 , Valve-Select Part No.-5537428800 , Tube Part No.-5537436100 , Valve Part No.-5537436200 , Adjusting Nut Part No.-5537443300 , Lock Part No.-5537443400 , Cup-Brg Part No.-5537443600 , Carrier Part No.-5537443700 , Cone-Bearing Part No.-5537444100 , Cup-Brg Part No.-5537444300 , Brake Assembly Part No.-5580010433 , Seal Part No.-5537445300 , V-Ring Seal Part No.-5537445500 , Carrier Part No.-5537445800 , Planet Gear Part No.-5537446200 , Snap Ring Part No.-5537454300 , Kit-Seal Part No.-5537454500 , Retainer Part No.-5537455600 , Kit-Seal Part No.-5537455800 , Relief Valve Part No.-5537455900 , Kit-Seal Part No.-5537456000 , Kit-Seal Part No.-5537456100 , Flatwasher Part No.-5537460500 , Screw Part No.-5537461700 , Back Part Part No.-5537461800 , Screw Part No.-5537461900 , Screw, Hex Head Part No.-5537462600 , Plug Part No.-5537463000 , Screw, Hex Head Part No.-5537463200 , Cup-Bearing Part No.-5537465200 , Bearing Part No.-5537465300 , Flange Part No.-5537473800 , Gasket Part No.-5537474200 , Cone Part No.-5537475000 , Stud Part No.-5537476600 , Snap Ring Part No.-5537492300 , Ring Part No.-5537492500 , Plate Part No.-5537492800 , Handle Part No.-5537499700 , Cap Part No.-5537501500 , Gasket Part No.-5537501600 , Packing Part No.-5537502400 , Packing Part No.-5537502800 , Ring Part No.-5537503000 , O-Ring Part No.-5537503700 , Lever Part No.-5537503800 , Capscrew-Hex Part No.-5537505200 , Kit Part No.-5537507700 , Kit-Seal Part No.-5537507800 , Switch-Press Part No.-5537510000 , Ring Part No.-5537519400 , Couple Part No.-5537519600 , Valve-Relay Part No.-5537534000 , Bolt/Gasket Part No.-5537538000 , Spring Part No.-5537538500 , Ring-Piston Part No.-5537538700 , Seal-Piston Part No.-5537538800 , Frct Disc Part No.-5537539100 , Reaction Pl Part No.-5537539200 , Seal-Piston Part No.-5537539300 , Piston-Brake Part No.-5537539400 , Pin Assy Part No.-5537539700 , Cover-Label Part No.-5537539900 , Kit-Seal Rin Part No.-5537540100 , Ring Part No.-5537542400 , O-Ring Part No.-5537544700 , Cartridge Part No.-5537545700 , Bushing Part No.-5537548000 , Timer Part No.-5537549300 , Suspension Part No.-5537550000 , Seal Kit Part No.-5537551300 , Adapter Part No.-5537554300 , Extension Part No.-5537558500 , Shaft Part No.-5537562100 , Plate Part No.-5537565400 , Valve-P.O.Di Part No.-5537567700 , Flange Part No.-5537569700 , Clamp Part No.-5537583500 , Bolt Part No.-5537587200 , E-Ring Part No.-5537593600 , Flash Light Part No.-5537594800 , Spider & Brg Part No.-5537597100 , Pump Adapter Part No.-5537606800 , Kit-Snapring Part No.-5537607500 , Washer Part No.-5537613700 , Bearing Part No.-5537634200 , Oil Shield Part No.-5537634400 , Bearing Cone Part No.-5537634700 , Shim-.004 Part No.-5537634800 , Piston Ring Part No.-5537635600 , Snap Ring Part No.-5537636800 , Snap Ring Part No.-5537636900 , Bearing Cone Part No.-5537637000 , Outer Race Part No.-5537637100 , Bearing Cup Part No.-5537637300 , Bearing Cone Part No.-5537637400 , Gasket Part No.-5537638000 , Spring Part No.-5537639300 , Piston Part No.-5537639500 , Snap Ring Part No.-5537639600 , Snap Ring Part No.-5537639700 , Sleeve Part No.-5537648700 , Kit-Seal Part No.-5537671400 , Gauge Part No.-5537672600 , Gauge-12V Part No.-5537672900 , Gauge Part No.-5537673100 , Spider Brg. Part No.-5537673500 , End Plate Part No.-5537677900 , Valve-Ctrl Part No.-5537678400 , Bearing Part No.-5537682700 , Plug Part No.-5537689300 , Ring Part No.-5537698500 , Snap Ring Part No.-5537698600 , Washer Part No.-5537698700 , Washer Part No.-5537698800 , Washer Part No.-5537698900 , Kit Part No.-5537700900 , Seal Kit Part No.-5537701100 , Plug Part No.-5537704700 , Plate Part No.-5537704800 , Planet Shaft Part No.-5537713100 , Cable Lug Part No.-5537713800 , Valve Part No.-5541906600 , Cap Part No.-5537718500 , Gasket Part No.-5537719600 , Kit-Spindle Part No.-5537727900 , Bearing Part No.-5537732900 , Hub Part No.-5537733300 , Thrust Washer Part No.-5537733500 , Hub Assembly Part No.-5537733700 , Seal Part No.-5537733900 , Spindle Part No.-5537734000 , Housing Part No.-5537734500 , O-Ring Part No.-5537734900 , Seal Part No.-5537741400 , Spacer Part No.-5537749700 , Bearing Part No.-5537752400 , Kit-Seal Part No.-5537754700 , Check Valve Part No.-5537754800 , Spring Part No.-5537759000 , Plug Part No.-5537777600 , Accumulator Charging Part No.-5537788800 , Speedometer Part No.-5537789000 , Brake Valve Part No.-5537789400 , Cap Part No.-5537791100 , Shaft-Axle Part No.-5537791200 , Valve Part No.-5537793000 , Bearing Cone Part No.-5537794300 , Cordgrip Part No.-5537795100 , Seal Part No.-5537795200 , Dust Shield Part No.-5537795300 , Cartridge Part No.-5537798700 , Valve-Relief Part No.-5537809300 , Valve Part No.-5537811500 , Stub Part No.-5537812600 , Air Breather Part No.-5537813200 , Plate Part No.-5580014103 , Details Part No.-5537813700 , Body Part No.-5112320239 , Alarm Part No.-5537815400 , Flange Part No.-5537826000 , Nut Part No.-5537826100 , Pinion Gear Part No.-5537826200 , Check Valve Part No.-5537828100 , Rubber Part No.-5537830000 , Plate-Brake Part No.-5537830900 , Coil-24V Part No.-5537831900 , Spring Part No.-5537834200 , Cover Part No.-5537837000 , Hub Part No.-5537838800 , Triple Tee Part No.-5537845500 , Air Chuck Part No.-5537845600 , Clutch--Pist Part No.-5537846900 , Recep Connector Part No.-5537857400 , Cable Lug Part No.-5537857500 , Term Seal Part No.-5537857600 , Plug Connector Part No.-5537857900 , Cable Lug Part No.-5537858000 , Cable Seal Part No.-5537858100 , Spring Part No.-5537862900 , Light-Blue S Part No.-5537873000 , Set Screw Part No.-5537873900 , Knock Pin Part No.-5537875000 , Dowell Pin Part No.-5537877900 , Washer -Thrust Part No.-5537879800 , Bolt Part No.-6060005252 , Diff.Kit Part No.-5537882100 , Valve Part No.-5537883300 , Pedal Part No.-5537883400 , Valve Part No.-5537883500 , Bearing Part No.-5580007703 , Spring Part No.-5537885200 , Terminal Blk Part No.-5537886500 , Spring Part No.-5537887200 , Capscrew Part No.-5537890000 , Spring Part No.-5537890100 , Valve-Lockup Part No.-5537891100 , Nut Part No.-5537892300 , Seal Part No.-5537893200 , Ring Part No.-5537894100 , Bolt Part No.-5537894200 , Roller Brg Part No.-5537894300 , Level Gauge Part No.-5537895500 , Seal Part No.-5540000800 , Seal Part No.-5540001600 , Bolt Part No.-5540001800 , Nut Part No.-5540001900 , Retainer Ring Part No.-5540002000 , Gear Ring Part No.-5540002200 , Gear Drive Part No.-5540002300 , Retaining Ring Part No.-5540002500 , Bearing Part No.-5540002600 , Bearing Part No.-5540002700 , Hub Part No.-5540003500 , Coil Part No.-5540022000 , Valve Part No.-5540025300 , Gear Part No.-5540034300 , Gear Part No.-5540034400 , Seal Kit Part No.-5540036000 , Precleaner Part No.-5540047200 , Motor Dome Part No.-5540047400 , Housing Part No.-5540051900 , Capscrew Part No.-5540054000 , Flat Washer Part No.-5540054100 , Pin Part No.-5540057200 , Bearing Part No.-5540057300 , Bearing Part No.-5540057400 , O-Ring Part No.-5540057700 , O-Ring Part No.-5540058100 , O-Ring Part No.-5540058600 , Spring Part No.-5540058700 , Bolt Part No.-5540058800 , Bolt Part No.-5540058900 , Piston Part No.-5540059100 , Friction Pl Part No.-5540059200 , Cover Part No.-5540059400 , Washer Part No.-5540059500 , Screw Part No.-5540059600 , Lock Plate Part No.-5540059700 , Lock-Ring Part No.-5540060400 , Separator Part No.-5540060500 , Nut Part No.-5540060600 , Washer Part No.-5540060700 , Cover Part No.-5540061000 , Bolt Part No.-5540061200 , Bolt Part No.-5540061300 , Not Del. Sep. Part No.-5540061500 , Dowel Pin Part No.-5540062800 , Spindle Part No.-5540063200 , Plate Part No.-5540063600 , Cable Lug Part No.-5540066700 , Valve Part No.-5540067100 , Valve Part No.-5540067200 , Magnet Part No.-5540067500 , O-Ring Part No.-5540069500 , Bearing Part No.-5540069600 , O-Ring Part No.-5540073500 , Retainer Part No.-5540074900 , Flange Part No.-5540076300 , Gasket Part No.-5540076400 , Lock Nut Part No.-5540077700 , Ring Part No.-5540079300 , Shaft Part No.-5540079800 , Sensor Plug Part No.-5540081000 , Drum-Clu Part No.-5540081500 , Bolt Part No.-5540082000 , Spring Part No.-5540082500 , Lock Up & Mo Part No.-5540082900 , Mounting Pla Part No.-5540083000 , Valve Part No.-5580101857 , Screen Part No.-5540083900 , Screw, Hex Head Part No.-5540084600 , Retainer Ring Part No.-5540087700 , Washer Part No.-5540087900 , Valve Part No.-5540088200 , Ring Part No.-5540088300 , Ring Part No.-5540088500 , Ring Part No.-5540088700 , Valve Part No.-5540090600 , Spacer Part No.-5540091700 , Driver Key Part No.-5540095500 , Kit-Pinion & Part No.-5540096500 , Clamp Part No.-5540099600 , Piston Part No.-5540099900 , Gear Wheel Part No.-5540100800 , Bearing Part No.-5540100900 , Washer Part No.-5540101000 , Set Screw Part No.-5540101300 , Bolt Part No.-5540101600 , Bolt Part No.-5540101700 , Bolt Part No.-5540101800 , Washer Part No.-5540113000 , Lock Ring Part No.-5540113700 , Gauge Part No.-5540118600 , Gauge Part No.-5540118700 , Connector Lock Part No.-5540119200 , Valve Part No.-5540121200 , Fibro-Mount Part No.-5540127700 , Clutch Hub Part No.-5540129200 , Screw, Hex Head Part No.-5540130700 , Gasket Part No.-5540130900 , Screw Part No.-5540131000 , Screw Part No.-5540131100 , Retainer Part No.-5540131400 , Lock Washer Part No.-5540131900 , Switch Part No.-5540132800 , Switch Part No.-5540133000 , Switch Part No.-5540133300 , Gasket Part No.-5540133500 , Pump Part No.-5590017593 , Valve Part No.-5540135600 , Circuit Breaker Part No.-5540137200 , Screw, Hex Head Part No.-5540163400 , Check Valve Part No.-5540164300 , Hexagon Nut Part No.-5540164900 , Spring Part No.-5540165700 , Gear Ring Part No.-5540166900 , Washer Part No.-5540167400 , Gasket Seal Part No.-5540168500 , Cartridge Part No.-5540169200 , Hinge Assembly Part No.-5540175400 , Valve Part No.-5540176400 , Valve Part No.-5540849900 , Screw, Hex Head Part No.-5540204700 , Screw, Hex Head Part No.-5540208300 , Clamp Part No.-5540210200 , Seal O-Ring Part No.-5540214600 , Glass Part No.-5540215400 , Ring Part No.-5540225900 , Gauge-Sight Part No.-5540228900 , Capscrew Part No.-5540243100 , Oil Seal Part No.-5540261800 , Bearing Part No.-5540266100 , Ring Gear Part No.-5540266200 , Shim Kit Part No.-5540266300 , Dust Cover Part No.-5540266400 , Collar Part No.-5540266600 , Planet Gear Part No.-5540267600 , Ring Gear Part No.-5540267900 , Drive Gear Part No.-6060004776 , Bearing Part No.-5540268100 , Bearing Part No.-5540268800 , Gear Part No.-5540279200 , Roller Brg Part No.-5540280700 , Brg Cone Part No.-5540284800 , Ring Part No.-5540291400 , Gauge Part No.-5540293100 , Check Valve Part No.-5540294400 , Cartridge Part No.-5540294600 , Seal Kit Part No.-5540294800 , Impeller Part No.-5540296100 , Ring Part No.-5540297300 , Yoke Part No.-5540297500 , Bearing Part No.-5540298300 , Bolt Part No.-5540309000 , Bolt Part No.-5540309200 , Lamp Part No.-5540380400 , Ret Ring Part No.-5540382100 , Diff Case Part No.-5540382700 , Lock Ring Part No.-5540383200 , Bearing Part No.-5540383300 , Collar Kit Part No.-5540383500 , Oil Seal Part No.-5540383600 , Light-Tail Part No.-5540385800 , Valve Part No.-5540386700 , Pressure Switch Part No.-5540387600 , Connector Part No.-5540387700 , Term Spad Part No.-5540387800 , Connector Part No.-5540387900 , Bearing Part No.-5540391200 , Bearing Part No.-5540391300 , Seal Part No.-5540391500 , Plug Part No.-5540391600 , Wiper Shaft Part No.-5540392600 , Wiper Blade Part No.-5540392700 , Pivot Guide Part No.-5540392800 , Eye-Reach Part No.-5540394300 , Bearing Part No.-5540396200 , Nozzle-Water Part No.-5540399400 , Wiper Arm Part No.-5540400700 , Wiper Blade Part No.-5540400800 , Seal Part No.-5540404300 , Light Hsg Part No.-5540406500 , Fan Part No.-5540406600 , Bearing Cup Part No.-5540413200 , Bearing Part No.-5540413300 , Cable Lug Part No.-5540417000 , Screw, Hex Head Part No.-5540419800 , Ignition Switch Part No.-5540426000 , Circuit Breaker Part No.-5540429900 , Screw, Hex Head Part No.-5540433500 , Gasket Part No.-5540434900 , Tube Part No.-5540435000 , Seal Part No.-5540435100 , Capscrew Part No.-5540435200 , Capscrew Part No.-5540435300 , Valve Part No.-3092631628 , Seal Kit Part No.-5540456600 , Gasket Part No.-5540457900 , Kit Part No.-5540459500 , Roller Part No.-5540459600 , Kit Part No.-5540459700 , Recep Connector Part No.-5540459800 , Cable Lug Part No.-5540459900 , Screw, Hex Head Part No.-5540462700 , Accumulator Part No.-5540463200 , Pulley Part No.-5540465900 , Connector Part No.-5540471100 , Connector Part No.-5540471200 , Cover Part No.-5540471300 , Mount Part No.-5540471400 , Cable Part No.-5540471900 , Alarm Part No.-5540472200 , Spring Part No.-5540475400 , Spacer Part No.-5540476000 , Ring Part No.-5540476100 , Support Part No.-5540476200 , Bearing Part No.-5540476400 , Clutch Assy. Part No.-5540476700 , Bearing Part No.-5540476800 , Hub Part No.-5540476900 , Ring Part No.-5540477000 , Ring Part No.-5540477100 , Washer Part No.-5540477200 , Washer Part No.-5540477300 , Washer Part No.-5540477400 , Shaft Gear Part No.-5540477600 , Screw, Hex Head Part No.-5540478000 , Screw, Hex Head Part No.-5540491600 , Recep Connector Part No.-5540492600 , Cavity Plug Part No.-5540492700 , Cap-Protect Part No.-5540492800 , Socket Part No.-5540493000 , Contact Housing Part No.-5540493200 , Connect. Cover Part No.-5540493600 , Connector Part No.-5540493700 , Fuse Part No.-5540502300 , Bearing Part No.-5540502400 , Receptacle Part No.-5540503000 , Plug Part No.-5540503100 , Brg Cup Part No.-5540503300 , Spring Part No.-5540503600 , Term Spad Part No.-5540503800 , Hub/Cup Part No.-5540511400 , Spindle Part No.-5540511600 , Gear Part No.-5540519100 , Gear Part No.-5540519200 , Spring Part No.-5540524800 , Seal Part No.-5540527100 , Valve-Needle Part No.-5540546900 , Locktite Part No.-5540547100 , Screw Part No.-5540547300 , Lock Nut Part No.-5540551000 , Screw Part No.-5540551100 , Link-Alt Part No.-5540552300 , Bearing Part No.-5540552500 , Housing Part No.-5540552700 , Washer Part No.-5540553500 , Valve Part No.-5540557500 , Spacer Part No.-5540559200 , Separator Part No.-5540560200 , Washer Part No.-5540560700 , Bearing-Pres Part No.-5540562900 , Bearing Asse Part No.-5540563000 , Bearing Part No.-5540563100 , Capscrew Part No.-5540564200 , Kit-Bearing Part No.-5540570600 , Capscrew Part No.-5540577200 , Capscrew Part No.-5540580700 , Breather Part No.-5537813200 , Holder-Rgear Part No.-5540590100 , Collar Part No.-5540590400 , Planet Carrier Part No.-5540592000 , Carrier Part No.-5540592100 , Shaft Part No.-5540592200 , Stud Part No.-5540592400 , Nut Part No.-5540592500 , Lock Part No.-5540598000 , Socket Part No.-5540599300 , Valve Part No.-5540609700 , Element Part No.-5540611700 , Kit-Seal Part No.-5540611800 , Valve Part No.-5540612500 , Valve Part No.-5540612600 , Plug Connector Part No.-5540614500 , Cable Seal Part No.-5540614600 , Connector Lock Part No.-5540614700 , Check Valve Part No.-5540616800 , Pressure Switch Part No.-5540626400 , Seal Kit Part No.-5540631500 , Valve Part No.-5540632200 , Gauge Part No.-5540633400 , Ring Part No.-5540636600 , Valve Part No.-5540637400 , Pipe Part No.-5540637500 , Gear Part No.-5540642000 , Screw, Hex Head Part No.-5540643900 , Plug Connector Part No.-5540645600 , Recep Connector Part No.-5540645700 , Cable Lug Part No.-5540645800 , Cable Lug Part No.-5540645900 , Cable Seal Part No.-5540646000 , Kit-Plug Part No.-5540647800 , Collector Part No.-5540647900 , Fuse Part No.-5540649100 , Valve-Brake, Part No.-5540649700 , Capscrew Part No.-5540652800 , Cable Lug Part No.-5540654800 , Term Ring Part No.-5540655100 , Splice Part No.-5540655500 , Cable Lug Part No.-5540657800 , Cable Lug Part No.-5540661700 , Spring Part No.-5540661900 , Ball Bushing Part No.-5540662000 , Starter Part No.-5540663100 , Ring Part No.-5540667900 , Relay Part No.-5540669200 , Relay Part No.-5540669300 , Capscrew Part No.-5540669500 , Lock Nut Part No.-5540669600 , Temp Valve Part No.-5540671000 , Oring Part No.-5540674400 , Pump Part No.-5540679100 , Cover Part No.-5540681400 , Spring Part No.-5540681500 , Back Part Part No.-5540690000 , Capscrew Part No.-5540690100 , Cover Part No.-5540690200 , Cable Lug Part No.-5540690700 , Valve Part No.-5540691600 , Bearing Reta Part No.-5540701900 , Gasket Part No.-5540710200 , Clamp Part No.-5540716000 , Repair Kit Part No.-5540718300 , Seal Kit Part No.-5540732300 , Check Valve Part No.-5540734800 , Flasher Part No.-5540735500 , Pin Part No.-5540740400 , Socket Part No.-5540740500 , Pin Part No.-5540740600 , Socket Part No.-5540740700 , Drive Plate Kit Part No.-5540743800 , Shaft Part No.-5540752300 , Shaft Part No.-5540752400 , Seal Kit Part No.-5540752600 , O-Ring Part No.-5540753100 , Seal Kit Part No.-5540753500 , Nut-Adj Part No.-5540755500 , Gear Set Part No.-5540758800 , Bearing Part No.-5540759100 , Adjusting Nut Part No.-5540759200 , Shim Kit Part No.-5540759300 , Retainer Part No.-5540759500 , Spacer Kit Part No.-5540759600 , Collar Kit Part No.-5540759700 , Collar Part No.-5540759800 , Flange Part No.-5540760800 , Washer Part No.-5540761400 , Brake Part No.-5540761500 , O-Ring Part No.-5540761600 , Oil Cooler Part No.-5540780400 , Gasket Part No.-5540784100 , Washer Part No.-5540784400 , Cap-Fuel Part No.-5540785700 , Knob Part No.-5540787600 , Valve-Check Part No.-5540787800 , Seal Kit Part No.-5540787900 , Valve Part No.-5540789400 , Block-Term Part No.-5540789500 , Cable Lug Part No.-5540793400 , Valve Part No.-5540794600 , Pump Part No.-5540804300 , Pressurizer Part No.-5540804700 , Connector Part No.-5540808700 , Bearing Part No.-5540809400 , Knob Part No.-5540809500 , Shaft-Input Part No.-5540810800 , Flange Part No.-5540811600 , Lock Ring Part No.-5540811700 , Yoke Part No.-5540812700 , Gear Control Part No.-5540813600 , Valve Part No.-5575701840 , Cable Lug Part No.-5540815500 , Capscrew Part No.-5540816600 , Recep Connector Part No.-5540819400 , Pump-Primer Part No.-5540820100 , Gauge Part No.-5540822700 , Accel. Pedal Part No.-5540829300 , Bolt Part No.-5530850600 , Adapter Ring Part No.-5540831000 , Bearing Part No.-5540831300 , Bearing Part No.-5533972900 , Retainer Part No.-5540831800 , Bearing Part No.-5540832200 , Retainer-Brg Part No.-5540834500 , Housing-Cove Part No.-5540835000 , Seal Kit Part No.-5540835300 , Valve-Check Part No.-5540836500 , Bearing Part No.-5540836900 , Connector Lock Part No.-5540837000 , Cable Seal Part No.-5540837100 , Collar Part No.-5540839700 , Carrier Part No.-5540840100 , Cover Part No.-5540844200 , Splice Kit Part No.-5540844900 , Seal Plug Part No.-5540846200 , Boot Part No.-5540848900 , Kit Part No.-5540849900 , Spring Part No.-5540850700 , Spring Part No.-5540851600 , Shim Part No.-5540852300 , Snap Ring Part No.-5540852500 , Spring Part No.-5540852600 , Cover Part No.-5540852700 , Shaft Part No.-5540852900 , Connector Part No.-5540859300 , Connector Lock Part No.-5540859400 , Cable Lug Part No.-5540859500 , Connector Part No.-5540859600 , Connector Lock Part No.-5540859700 , Cable Lug Part No.-5540859800 , Disc Part No.-5540863500 , Disc Part No.-5540863600 , Washer Part No.-5540865300 , Flange Part No.-5540876800 , Couple Part No.-5540878500 , Defroster Part No.-5540882000 , Ring-Back-Up Part No.-5540887300 , Seal-O Ring Part No.-5540887400 , Seal-O Ring Part No.-5540887500 , Seal Part No.-5540887700 , J Block Part No.-5540888100 , Seal Part No.-5540888700 , Hub & Cup As Part No.-5540890700 , Valve-Dump Part No.-5540891000 , Valve Part No.-5540891200 , Carrier/Cap Part No.-5540893200 , Filter Part No.-5540894500 , Filter Part No.-5540894700 , Mount-2 Pc Part No.-5540896400 , Bearing Part No.-5540898100 , Cover Part No.-5540901200 , Threaded Sleeve Part No.-5540902100 , Stator Part No.-6060006385 , Heat Shield Part No.-5540906800 , Filter Holder Part No.-5540907300 , Probe Part No.-5540907500 , Shield-Heat Part No.-5540908500 , Cable Lug Part No.-5540908600 , Cable Lug Part No.-5540908700 , Cable Lug Part No.-5540908800 , Cable Lug Part No.-5540908900 , Cable Lug Part No.-5540909000 , Spool Part No.-5540911300 , Valve Part No.-5540912700 , Seal Part No.-5540913200 , Collar Part No.-5540914300 , Cover Part No.-5540914500 , Lock Part No.-5540914700 , Cable Lug Part No.-5540915100 , Seal Part No.-5540915300 , Housing Part No.-5540915500 , Bearing-Roll Part No.-5540915600 , Retainer Part No.-5540915700 , Housing Part No.-5540916400 , Valve-Main C Part No.-5540916900 , Valve Assy Part No.-5540917300 , Control Part No.-5540922300 , Kit-Ring Gea Part No.-5540922800 , Washer Part No.-5540923600 , Plug Connector Part No.-5540924700 , Protect.Bellows Part No.-5540926600 , Housing- Part No.-5540928300 , Tool Part No.-5540928400 , Tachometer Part No.-5540935000 , Motor-Wiper Part No.-5540935100 , Grease Pump Part No.-5540937600 , Carrier Kit Part No.-5540938900 , Wheel Chocks Part No.-5540941700 , Ring Part No.-5540942900 , Fuse Part No.-5540944800 , Piston Ring Part No.-5540945400 , Cap Part No.-5540946600 , Yoke Part No.-5540948800 , Cable Lug Part No.-5540949200 , Cable Ties Part No.-5540951100 , Cover W/Thru Part No.-5540953600 , Ring Part No.-5540956600 , Repair Kit Part No.-5540957900 , Pump-Tandem Part No.-5540958400 , Washer Part No.-5540959800 , Seal Kit Part No.-5540960100 , Stud Part No.-5540960300 , Bearing Cone Part No.-5540961600 , Bearing Cone Part No.-5540961700 , Retainer/Cov Part No.-5540961900 , Washer Part No.-5540962000 , Plate-Thrust Part No.-5540962200 , Cup-Bearing Part No.-5540962900 , Cone-Bearing Part No.-5540963000 , Cone-Bearing Part No.-5540963100 , Cup-Bearing Part No.-5540963200 , Cone-Bearing Part No.-5540963400 , Yoke Group( Part No.-5540965400 , Gauge Part No.-5540966700 , Pedal & Base Part No.-5540967100 , Washer Part No.-0300013100 , Sleeve Part No.-5540977300 , Setscrew Part No.-5540978600 , Ring-Snap Part No.-5540978800 , Turbine Part No.-5540980300 , Yoke-8.5C Part No.-5540980800 , Gear Part No.-5540982800 , Gear Part No.-5540983000 , Shaft Part No.-5540983800 , Hanger Part No.-5540984300 , Exhaust Deflect Part No.-5540985000 , Retainer Part No.-5540987200 , Seal-V Ring Part No.-5540992300 , Indicator Part No.-5540993400 , Shock Absorb Part No.-5540993700 , Gasket Part No.-5540994500 , Gasket Part No.-5540994600 , Washer Part No.-5540994700 , Seal Washer Part No.-5540994800 , Kit Part No.-5540995600 , Breaker Circuit Part No.-5541005000 , Breaker Circuit Part No.-5541005100 , Steering Whl Part No.-5541005200 , Center Cap Part No.-5541005300 , Capscrew Part No.-5541006700 , Bearing Asse Part No.-5541006900 , Connector Part No.-5541007100 , Connector Part No.-5541007200 , Connector Part No.-5541007600 , Connector Part No.-5541008000 , Connector Part No.-5541008200 , Pump-Gear Part No.-5541008500 , Pedal-Brake Part No.-5541009300 , Valve-Steer Part No.-5541009700 , Connector Part No.-5541012600 , Connector Part No.-5541012800 , Connector Part No.-5541012900 , Lock Part No.-5541013200 , Lock Part No.-5541013300 , Lock Part No.-5541013400 , Switch Part No.-5541015400 , Seal-Rod Wip Part No.-5541016300 , Belt Kit Part No.-5541017900 , Grommet Part No.-5541018200 , Valve Part No.-5541018400 , Valve Part No.-5541018500 , Pump Part No.-5541018700 , Steer Wheel Part No.-5541019500 , Knob Part No.-5541019700 , Bearing-Spid Part No.-5541020900 , Bearing-Pill Part No.-5541023400 , Screw, Hex Head Part No.-5541024900 , Seal-Oil-C Part No.-5541026500 , Connector Lock Part No.-5541027500 , Connector Part No.-5541028600 , Connector Lock Part No.-5541028700 , Connector Lock Part No.-5541028800 , Oilseal-Cann Part No.-5541029800 , Screw, Hex Head Part No.-5541032200 , Purifier Part No.-5541032400 , Recep Connector Part No.-5541034200 , Connector Lock Part No.-5541034500 , Connector Part No.-5541034700 , Connector Part No.-5541035000 , Connector Lock Part No.-5541035400 , Bearing-Spid Part No.-5541035900 , Capscrew-Hex Part No.-5541036000 , Manifold Part No.-5541036500 , Boot Part No.-5541036700 , Boot Part No.-5541036900 , Boot Part No.-5541037000 , Boot Part No.-5541037100 , Boot Part No.-5541037200 , Boot Part No.-5541037300 , Oilseal Part No.-5541041500 , Seal-Oil Part No.-5541041700 , Plug Connector Part No.-5541042800 , Mount - Cent Part No.-5541042900 , Pump Part No.-5541044800 , Screw, Hex Head Part No.-5541045700 , Seal Part No.-5541048600 , Seal-Pin Part No.-5541048800 , Terminal Blo Part No.-5541048900 , Stop Part No.-5541049000 , Connection Part Part No.-5541049200 , Contact Housing Part No.-5541049500 , Contact Hous Part No.-5541049600 , Seal Part No.-5541052400 , Seal-Pin Part No.-5541052500 , Valve-Ctrl Part No.-5541052700 , Valve-Check Part No.-5541053000 , Busbar Part No.-5541056300 , Receptacle Part No.-5541056700 , Gasket Part No.-5541057400 , Flow Control Part No.-5541057600 , Busbar Part No.-5541059400 , Receptacle Part No.-5541059500 , Seal-Pin Part No.-5541060200 , Valve-Cntrl Part No.-5541062300 , Bleeder Part No.-5541064100 , Spring-Compr Part No.-5541070000 , Plate Part No.-5541070400 , Connector Part No.-5541070600 , Grommet-5/16 Part No.-5541072200 , Seal Part No.-5541073300 , Valve Part No.-5541076600 , Terminal Part No.-5541077600 , Capscrew Part No.-5541078200 , Valve-Needle Part No.-5541078600 , Switch Part No.-5541078700 , Attachment Nut Part No.-5541079100 , Capscrew Part No.-5541081000 , Capscrew Part No.-5541081400 , Capscrew Part No.-5541081500 , Capscrew Part No.-5541082400 , Spring Washer Part No.-5541083700 , Spring Washer Part No.-5541083800 , Linch Pin W/ Part No.-5541085200 , Plain Washer Part No.-5541085300 , Connector Part No.-5541086200 , Recr/Drier Part No.-5541087600 , Contact Housing Part No.-5541089000 , Connector Part No.-5541089600 , Connector Part No.-5541089700 , Adapter Part No.-5541089800 , Spring Part No.-5541090700 , Valve - Part No.-5541092200 , Belt Part No.-5541092400 , Contact Bloc Part No.-5541092600 , Switch-Temp Part No.-5541093000 , Solenoid Part No.-5541093600 , Weld Stud Part No.-5541100700 , Seal Washer Part No.-5541103300 , Baffle Plate Part No.-5541104100 , Baffle Plate Part No.-5541104200 , Seal Kit Part No.-5541111200 , Set Part No.-5541111900 , Brake Unit Part No.-5541113500 , Cover Part No.-5541113600 , Quad-Ring Part No.-5541116100 , Quad Ring Part No.-5541116200 , Quad-Ring Part No.-5541116300 , Quad-Ring Part No.-5541116400 , Quad-Ring Part No.-5541116500 , Section-Inle Part No.-5541119800 , Section Part No.-5541120300 , Valve-Relief Part No.-5541120600 , Kit-Seal Part No.-5541120900 , Seal Kit Part No.-5541121000 , Kit-Seal Part No.-5541121100 , Kit-Seal Part No.-6060015161 , Stud Assy Part No.-5541122400 , Seal-Hub Fac Part No.-5541123500 , Seal-V Ring Part No.-5541123900 , Dust Shield- Part No.-5541124000 , Shaft-Planet Part No.-5541124400 , Seal Part No.-5541127000 , Kit-Seal Part No.-5541128400 , Boot Part No.-5541129600 , Boot Part No.-5541129700 , Packing Part No.-5541130800 , Kit-Seal Part No.-5541132700 , Shim Set Part No.-5541133300 , Sensor-Speed Part No.-5541138100 , Mount Part No.-5541138700 , Valve-Relief Part No.-5541138900 , Gear Hub Part No.-5541139500 , Lock-Brg Part No.-5541139800 , Gear Part No.-5541139900 , Bolt-Plated Part No.-5541140900 , Retainer Part No.-5541141200 , Lock Nut Part No.-5541143300 , Capscrew Part No.-5541143800 , Washer Part No.-5541143900 , Cap Part No.-5541162200 , Bolt Part No.-5541162300 , Washer Part No.-5541162400 , Bolt Part No.-5541162500 , Screw Part No.-5541163500 , Cartridge Part No.-5541165700 , Valve-Check Part No.-5541165800 , Valve-Check Part No.-5541166000 , Spider & Brg Part No.-5541171300 , Carrier Brg Part No.-5541171400 , Valve-Check Part No.-5541172700 , Valve-Relief Part No.-5541172800 , Gasket Part No.-5541180200 , Roller Part No.-5541185700 , Seal Part No.-5541187500 , Breather Part No.-5541188000 , Gasket Part No.-5541190900 , Gasket Part No.-5541191000 , Pump Part No.-5541197500 , Gasket Part No.-5541198500 , Bearing Part No.-5541200200 , Strainer-Ass Part No.-5541200800 , Ring Part No.-5541202900 , Solenoid Part No.-5541203200 , Bearing Part No.-5541203400 , Bearing Part No.-5541203600 , Bearing Part No.-5541203700 , Bearing Part No.-5541205200 , Bearing Part No.-5541205300 , Shoulder Screw Part No.-5541210800 , Plate Part No.-5541214600 , Stud Part No.-5541215800 , Stud Part No.-5541216000 , Drive Plate Part No.-5541216200 , Cap-Filler Part No.-5541217100 , Drive Plate Part No.-5541218200 , Stud-Dbl End Part No.-5541222100 , Switch Part No.-5541226000 , Ring Part No.-5541227200 , Ring Part No.-5541227300 , Seal Part No.-5541227900 , Bearing Cup Part No.-5541229100 , Bearing Cone Part No.-5541229200 , Plate Part No.-5541232900 , Valve Part No.-5541233100 , Plate Part No.-5541233200 , Valve Part No.-5541233300 , Plate Part No.-5541233400 , Indicator Part No.-5541233600 , Valve Part No.-5541233700 , Valve Part No.-5541233800 , Capscrew Part No.-5541239800 , Lock Nut Part No.-5541240100 , Piston Part No.-5541240200 , Protection Part No.-5541244400 , Cap-Grease Part No.-5541244700 , Relief Assy Part No.-5541244800 , Housing-Pump Part No.-5541245400 , Kit Part No.-5541245700 , Kit Part No.-5541245800 , Kit Part No.-5541245900 , Kit Part No.-5541246000 , Motor Kit Part No.-5541246100 , Gasket Part No.-5541247900 , Adapter Part No.-5541248600 , Ring-Key Part No.-5541250700 , Receptacle Part No.-5541255400 , Bushing Part No.-5541263900 , Bushing Part No.-5541264000 , Kit-Repair-E Part No.-5541265400 , Kit-Repair Part No.-5541265500 , Housing Part No.-5541265700 , Dust Cap Part No.-5541269500 , Cap Part No.-5541269600 , Driveline As Part No.-5506946200 , Disc-Clutch Part No.-5541285800 , Dust Cap Part No.-5541289000 , Connector Part No.-5541297900 , Shaft-Axle Part No.-5541298000 , Valve Part No.-5541298100 , Cable Lug Part No.-5541304800 , Cable Lug Part No.-5541304900 , Cup-Brg Part No.-5541307500 , Seal Kit Part No.-5541310100 , Ring Part No.-5541311200 , Valve Part No.-5541316900 , Valve Part No.-5541317000 , Tie Rod Kit Part No.-5541317100 , Cover, Wiper Part No.-5541317200 , Relay Part No.-5541317300 , Cable Ties Part No.-5541317400 , Valve-Expans Part No.-5541321100 , Thermostat-A Part No.-5541321200 , Ring-Entry Part No.-5541321900 , Wheel-Blower Part No.-5541322000 , Switch-Press Part No.-5541322800 , Panel-Circui Part No.-5541323700 , Relay Part No.-5541323800 , Harness-Wiri Part No.-5541324100 , Motor-Hyd Part No.-5541324700 , Solenoid Part No.-5541325000 , Seal Part No.-5541328400 , Piston Ring Part No.-5541328700 , Piston Ring Part No.-5541328800 , Kit-Repair Part No.-5541334300 , Lock Nut Part No.-5541334400 , Lock Ring Part No.-5541335900 , O-Ring Part No.-5541336500 , Bushing Part No.-5541336700 , Kit-Repair Part No.-5541336900 , Contact Housing Part No.-5541337800 , Seal Kit Part No.-5541342700 , Flange Assy Part No.-5541347900 , Capscrew Part No.-5541348000 , Plate Part No.-5541348100 , Gasket Part No.-5541349500 , Cartridge-Va Part No.-5541349700 , Boot Part No.-5541349800 , Gasket Part No.-5541349900 , Receptacle Part No.-5541350600 , Contact Housing Part No.-5541351200 , Removal Tool Part No.-5541351600 , Bearing-Spid Part No.-5541352200 , Seal-Piston Part No.-5541353100 , Gear Part No.-5541353400 , Bearing Part No.-5541353500 , Ring-Snap Part No.-5541353700 , Gasket Part No.-5541354200 , Gasket Part No.-5541355600 , Light-Pilot Part No.-5541359700 , Spring Part No.-5541359800 , Pump Part No.-5541363900 , Nut Part No.-5541364100 , Carrier-Plnt Part No.-5541364400 , Kit-Seal Part No.-5541366200 , Ring-Quad Part No.-5541367300 , Ring-Quad Part No.-5541367400 , Ring-Quad Part No.-5541367500 , Gasket Part No.-5541369800 , Gasket Part No.-5541369900 , Gasket Part No.-5541372100 , Piston Part No.-5541374200 , Adapter Part No.-5541376900 , Cup Part No.-5541377900 , Quad-Ring Part No.-5541380300 , Capscrew Part No.-5541382300 , Yoke Part No.-5541383000 , Stem Part No.-5541384600 , Connector Part No.-5541391500 , Contact Housing Part No.-5541391600 , Plastic Rece Part No.-5541391800 , Plastic Recept Part No.-5541391900 , Receptacle Part No.-5541392000 , Plastic Recept Part No.-5541392100 , Contact Housing Part No.-5541392200 , Contact Housing Part No.-5541392300 , Plastic Recept Part No.-5541392400 , Contact Housing Part No.-5541392500 , Contact Housing Part No.-5541392900 , Plastic Plug Part No.-5541393000 , Wagner Part Part No.-5541393300 , Plastic Plug Part No.-5541393700 , Plastic Plug Part No.-5541393800 , Contact Housing Part No.-5541393900 , Plug Connector Part No.-5541394000 , Grip-Door Part No.-5541394600 , Lock Nut Part No.-5541396800 , Capscrew Part No.-0147136407 , O-Ring Part No.-5541398200 , Bearing Part No.-6060005719 , Bearing Part No.-5541865800 , Breather Part No.-2659677831 , Mounting Part No.-5541403700 , Cross Part No.-5541404500 , Circuit Breaker Part No.-5541414200 , Piston Part No.-5541415900 , Drive Plate Part No.-5541418200 , Seal-Oil Part No.-5541418800 , Valve Assy-R Part No.-5541419300 , Linkage Part No.-5541420300 , Light-Inter Part No.-5541421100 , Screw, Hex Head Part No.-5541429600 , Bearing Ball Part No.-5541429700 , Seal Part No.-5541430200 , Snap Ring Part No.-5541430700 , Bolt Part No.-5541436300 , Seal Kit Part No.-5541436700 , Coil Part No.-5541436800 , Seal V-Ring Part No.-5541443100 , Valve Part No.-5541448100 , Sensor Part No.-5541448500 , Kit-Diff Part No.-5541449100 , Guard Part No.-5541452700 , Ring Part No.-5541452800 , Breather Part No.-2659677831 , Gasket & Sea Part No.-5541456200 , Cartridge Part No.-5541459000 , Seal Kit Part No.-5541459800 , Seal Kit Part No.-5541460000 , Cap-Rain Part No.-5541466600 , Bearing Part No.-5541469600 , Bearing Part No.-5541469700 , Tube Part No.-5541470700 , Tube Part No.-5541470800 , Shaft-Axle Part No.-5541471900 , Cup-Bearing Part No.-5541473100 , Thrust Washer Part No.-5541473200 , Roller Part No.-5541474300 , Spider Part No.-5541474400 , Diff Case Part No.-5541474500 , Service Kit Part No.-5541485600 , Gauge Part No.-5541485700 , Gear-Idler Part No.-5541486500 , Oil Seal Part No.-5541488900 , Plate Part No.-5541489000 , Yoke Part No.-5541489900 , Seal Kit Part No.-5541495000 , Valve Part No.-5541495500 , Bearing Part No.-5541501600 , Sleeve Part No.-5541503500 , Sleeve Part No.-5541503600 , Sleeve Part No.-5541503700 , Gasket Part No.-5541504500 , Stud Part No.-5541506200 , Gasket Part No.-5541506300 , Screen/Plug Part No.-5541506600 , Gasket Part No.-5541506700 , Bushing Part No.-5541506800 , Bearing Part No.-5541508100 , Ring Part No.-5541508200 , Tube Part No.-5541508400 , Shaft Part No.-5541508900 , Snap Ring Part No.-5541509600 , Shaft, Drum, Part No.-5541510300 , Seal Part No.-5541510700 , Seal Part No.-5541510800 , Disc Part No.-5541511000 , Spring Part No.-5541511200 , Snap Ring Part No.-5541511300 , Spring Part No.-5541511400 , Retainer Part No.-5541511500 , Cone Part No.-5541511700 , Cup Part No.-5541511800 , Ring Part No.-5541511900 , Ring Part No.-5541512000 , Ring Part No.-5541512100 , Ring Part No.-5541512200 , Ring Part No.-5541512300 , Ring Part No.-5541512400 , Bearing Part No.-5541512500 , Ring Part No.-5541512700 , Bearing Part No.-5541513300 , Cap Part No.-5541513400 , Clutch Pisto Part No.-5541513800 , Seal Part No.-5541513900 , Plate Part No.-5541514000 , Bearing Part No.-5541514100 , Ring Part No.-5541514200 , Hub Part No.-5541514300 , Retainer Part No.-5541514400 , Ring Part No.-5541514500 , Clutch Assy Part No.-5541514600 , Bearing Part No.-5541515000 , Spacer Part No.-5541515100 , Cap Part No.-5541515200 , Cone Part No.-5541515800 , Cup Part No.-5541515900 , Bearing Assy Part No.-5541516000 , Bearing Part No.-5541516100 , Ring Part No.-5541516200 , Bearing Part No.-5541516900 , Ring Part No.-5541517000 , Bearing Part No.-5541517100 , Ring Part No.-5541517200 , Shaft Part No.-5541517500 , Cup Part No.-5541517600 , Cone Part No.-5541517700 , Stud Part No.-5541517800 , Cap Part No.-5541518300 , Cap Part No.-5541518400 , Valve & Pump Part No.-5541518500 , Tube Part No.-5541518600 , Gasket Part No.-5541518700 , Retainer Part No.-5541518800 , Valve -Press Part No.-5541520200 , Pump-Chargin Part No.-5541520300 , Gear & Shaft Part No.-5541521300 , Gear & Shaft Part No.-5541521400 , Bolt Part No.-5541521600 , Coupling Part No.-5541523500 , Bearing Part No.-5541528400 , Ring-Retaini Part No.-5541528500 , Shaft-Axle Part No.-5541528700 , Gear-Sun Part No.-5541528800 , Diff & Carri Part No.-5541529000 , Diff & Carri Part No.-5541529100 , Retainer-Sea Part No.-5541529300 , Seal-V-Ring Part No.-5541529500 , Shield Part No.-5541529600 , Retainer Part No.-5541529700 , Unit-No Spin Part No.-5541530400 , Hinge-Weld-O Part No.-5541530700 , Resistor Part No.-5541532300 , Washer -Thrust Part No.-5541534900 , Cap Seal T Part No.-5541537400 , Cap Part No.-5541537700 , Cap Part No.-5541537800 , Gear Part No.-5541538200 , Cover Part No.-5541538300 , Shaft Part No.-5541538500 , Cross Part No.-5541539300 , Solenoid Valve Part No.-5541540400 , Pump/Motor Part No.-5541541300 , Spring Assy Part No.-5541544400 , Screw, Hex Head Part No.-5541550300 , Lock Nut Part No.-5541550900 , Lock Nut Part No.-5541551000 , Lock Nut Part No.-5541558100 , Shaft Assy Part No.-5541559600 , Mount Part No.-5541562700 , Plug Part No.-5541564900 , Gauge Part No.-5541565000 , Piston-Brake Part No.-5541565700 , Pin Assy Part No.-5541565900 , Bearing- Part No.-0509012113 , Clutch Drive Part No.-5541570300 , Cover Plate- Part No.-5541572900 , Cover Plate Part No.-5541573000 , Inserts-Sing Part No.-5541574100 , Inserts Part No.-5541574300 , Inserts-Sing Part No.-5541574500 , Shaft Assy Part No.-5541575500 , Pump-Grease Part No.-5541580400 , Screw, Hex Head Part No.-5541583800 , Washer Part No.-5541589300 , Kit-Rebuild Part No.-5541592600 , Kit-Rebuild Part No.-5541592700 , Cartridge Part No.-5541593600 , Inserts-Sing Part No.-5541597300 , Cover Plate Part No.-5541598100 , Inserts Part No.-5541598200 , Sleeve Part No.-5541600200 , Bleeder-Air Part No.-5541600500 , Ring-Retaini Part No.-5541602300 , Washer Part No.-5541607500 , Washer Part No.-5541608500 , Silencer Part No.-5541609300 , Silencer-7Dm Part No.-5541609400 , Silencer Part No.-5541609800 , Mount Part No.-5541611600 , Contact Housing Part No.-5541611800 , Bolt Part No.-5541614100 , Pressure Switch Part No.-5541615200 , Pressure Switch Part No.-5541615300 , Board-Circui Part No.-5541640800 , Manifold Part No.-5541648700 , Valve-Needle Part No.-5541648800 , Valve-Check Part No.-5541648900 , Valve-Ball Part No.-5541652100 , Mount W/Reta Part No.-5541652700 , Valve/Manifo Part No.-5541654700 , Pin Part No.-5541659500 , Switch - Part No.-3176005923 , Bearing Part No.-5541661700 , Coil Part No.-5541663000 , Bearing Part No.-5541663500 , Contact Housing Part No.-5541663700 , Mount-2 Piec Part No.-5541664500 , Mount-2Pc Part No.-5541665700 , Mount- Part No.-5541665900 , Connector Part No.-5541668100 , Not Del. Sep. Part No.-5541672800 , Center Body- Part No.-5541677400 , Seal Kit Part No.-5541678300 , Valve Part No.-5541678400 , Motor-Elec Part No.-5541679200 , Cup-Bearing Part No.-5541705500 , Retainer Part No.-5541705800 , Flange Part No.-5541706000 , Gear/Pinion Part No.-5541706600 , Seal-Pin Part No.-5541707100 , Seal-Pin Part No.-5541707200 , Gear Set Part No.-5541710700 , Carrier Part No.-5541711900 , Seal Kit Part No.-5541713200 , Striker Bolt Part No.-5541721300 , Regulator Part No.-5541728200 , Seal-Pin Part No.-5541729100 , Bearing Assy Part No.-5541733100 , Kit-Bearing Part No.-5541733300 , Plate Part No.-5541733800 , Switch Part No.-6060007257 , Kit-Seal Part No.-5541737500 , Sleeve Assy Part No.-5541738600 , Valve Part No.-5541738700 , Bearing Assy Part No.-5541739500 , Pump Part No.-5541743200 , Spacer Kit Part No.-5541745400 , Cup Part No.-5541745600 , Piston/Seal Part No.-5541750200 , Column-Steer Part No.-5541752000 , Control-Hyd Part No.-5541753100 , Diff Case Part No.-5541753600 , Pump-Lube Part No.-5541754300 , Cooler-Hydra Part No.-5541757600 , Seal Kit Part No.-5541758200 , Seal Kit Part No.-5541758400 , Washer Part No.-5541759700 , Bolt,Stud Part No.-6060004880 , Cover Part No.-5541761400 , Carrier Part No.-5541762900 , Pump Part No.-5541763600 , Valve Part No.-5541763900 , Bearing Part No.-5541764400 , Cone Part No.-5541765500 , Plate Part No.-5541765600 , Pin-Hitch Part No.-5541765700 , Pin-Hitch Part No.-5541765800 , Seal Kit Part No.-5541766200 , Cap-Radiator Part No.-5541767300 , Sleeve Part No.-5541767400 , Spacer/Shim Part No.-5541771100 , Hub-Wheel Part No.-5541773100 , Sensor Part No.-5541823100 , Kit Part No.-5541830900 , Plug Part No.-5541836700 , Bearing Part No.-5112300379 , Washer Part No.-5541839900 , Stud Part No.-5541840000 , Flange Nut Part No.-5541845100 , Ring Part No.-5541857300 , Polyswitch Part No.-5541858600 , Receptacle Part No.-5541858900 , Bearing-Ball Part No.-5541865800 , Speedo-Prog Part No.-5541868100 , Led Light Part No.-5541868200 , Pressure Swi Part No.-5541868800 , Seal Ring Part No.-5541869500 , Cable #16-3 15 Male/Female Part No.-5541879600 , Plc Expansio Part No.-5541880800 , Plc Expansio Part No.-5541880900 , Plug Part No.-5541883400 , O-Ring Part No.-5541883700 , Plate-Space Part No.-5541885600 , Shift Lever Part No.-5541889800 , Gasket Part No.-5541893100 , Seal Kit Part No.-5541902000 , Blower Part No.-5541902100 , Kit-Seal Part No.-5541902400 , Kit-Rod Seal Part No.-5541902500 , Spring Part No.-5541903900 , Contact Housing Part No.-5541905000 , Wedge Lock Part No.-5541905100 , Housing Part No.-5541906500 , Valve Assy Part No.-5541906600 , Backshell 90 Part No.-5541909500 , Plug Part No.-5541911700 , Plug Part No.-5541911900 , Contact Housing Part No.-5541912900 , Contact Housing Part No.-5541913100 , Contact Housing Part No.-5541913500 , Contact Housing Part No.-5541913600 , Tube-Rad Part No.-5541915100 , Seal Kit Part No.-5541915300 , Nut Part No.-5541915800 , Seal Kit Part No.-5541917800 , Cable Lug Part No.-5541920900 , Drive Arm Part No.-5541921200 , Socket Part No.-5541921400 , Extraction T Part No.-5541921600 , Cable Lug Part No.-5541922500 , Contact Housing Part No.-5541923100 , Grommet Part No.-5541924100 , Cable Part No.-5541924200 , Front Cover Part No.-5541924400 , Washer Flat Part No.-5541924700 , Ring-Snap Part No.-5541925200 , Wear Sleeve Part No.-5541925600 , Pump Part No.-5541927400 , Gauge Part No.-5541928500 , Gear Part No.-5541935900 , Ring-Retaini Part No.-5541936400 , Yoke-End Part No.-5541936600 , Flange Screw Part No.-5541936900 , Seal-Oring Part No.-5541937700 , Hub To Seal Part No.-5541938100 , Cone-Bearing Part No.-5541938200 , Cup-Bearing Part No.-5541938300 , Cup-Bearing Part No.-5541938500 , Cone-Bearing Part No.-5541938600 , Ring-Snap Part No.-5541939100 , Sensor-Speed Part No.-5541945400 , Cap Part No.-5541949700 , Wagner Part Part No.-5541950800 , Gauge-Fuel Part No.-5541950900 , Bearing Part No.-5541954200 , Hitch Pin Part No.-5541955100 , O-Ring Part No.-5541956300 , Clutch Assy. Part No.-5541957000 , Spring Part No.-5541957400 , Spring Part No.-5541957500 , Retaining Ring Part No.-5541957600 , Gear Part No.-5541957700 , Brg Retainin Part No.-5541957900 , Cup Part No.-5541958000 , O-Ring Part No.-5541958300 , Low Speed Sh Part No.-5541958500 , Bearing Cap Part No.-5541958700 , Bearing Cap Part No.-5541958800 , Bearing Cap Part No.-5541958900 , Bearing Cap Part No.-5541959000 , Rear Bearing Part No.-5541959100 , O-Ring Part No.-5541959300 , O-Ring Part No.-5541959400 , Shaft-Axle Part No.-5541960400 , Hub/Cup Assy Part No.-5541960600 , Wear Sleeve Part No.-5541960800 , Receptacle Part No.-5541961800 , Sender Fuel Part No.-5541962300 , Harness 3 Wi Part No.-5541962400 , Couple Part No.-5541962700 , Pillow Block Part No.-5541963000 , Hub-Gear Part No.-5541963900 , Stud Part No.-5541964000 , Nut Lock Part No.-5541964100 , Snap Ring Part No.-5541964200 , Valve-Ball 3 Part No.-5541967200 , Gear Part No.-5541972900 , Trunion Part No.-5541973500 , Spacer Part No.-5541973700 , Hand Pump Part No.-5541974300 , Head Assembly Part No.-5541974900 , Washer Part No.-5541984700 , Spacer Part No.-5541985200 , Seal Part No.-5541985300 , Sealing Kit Part No.-5541986200 , Seal-Inner Part No.-5541987000 , Seal-Outer Part No.-5541987100 , Gear & Brg Part No.-5541987500 , Spring Part No.-5541993300 , Piston Ring Part No.-5541998000 , Motor-Wiper Part No.-5542001600 , Brake Valve Part No.-5542003200 , Plate-Clutch Part No.-5542004300 , Kit-Overhaul Part No.-5542007100 , Kit-Bearing Part No.-5542007200 , Kit-Seal Part No.-5542007300 , Gasket/Seal Part No.-5542007900 , Snap Ring Part No.-5542008100 , Seal Part No.-5542008500 , Ring Part No.-5542008600 , Disc Part No.-5542008700 , Seal Part No.-5542008900 , Seal Assy Part No.-5542009000 , Piston-Brake Part No.-5542009100 , Seal-Sq Cut Part No.-5542009300 , Cover Part No.-5542009500 , Piston-Clutc Part No.-5542010900 , Backup Plate Part No.-5542011000 , Spring Part No.-5542011100 , Snap Ring Part No.-5542011400 , Module Part No.-5542011900 , Lockring Part No.-5542012500 , Spacer Part No.-5542015600 , Cap/Sleeve A Part No.-5542015700 , Flange Part No.-5542016900 , Gear Part No.-5542017100 , Bearing Part No.-5541958100 , Retainer Part No.-5542018400 , Diff Kit Part No.-5542022400 , Bearing-Pill Part No.-5542022500 , Sun Gear Part No.-5542024600 , Cup-Diff Brg Part No.-5542025000 , Cone-Bearing Part No.-5542025100 , Bearing Part No.-5542025200 , Cone-Bearing Part No.-5542025300 , Cup-Bearing Part No.-5542025400 , Brg Cage/Cup Part No.-5542025500 , Snap Ring Part No.-5542025800 , Valve-Main C Part No.-5542028100 , Lever Part No.-5542032000 , Section-Valv Part No.-5542033100 , Screw, Hex Head Part No.-5542035100 , Switch-Binar Part No.-5542036700 , Knurled Knob Part No.-5542037700 , Cooler - Tra Part No.-5542064800 , Speed Indicator Part No.-5542065500 , Bearing Part No.-5542066200 , Washer Hose Part No.-5542070000 , Contact Housing Part No.-5542079400 , Contact Housing Part No.-5542079500 , Column Steer Part No.-5542082100 , Valve-Brake Part No.-5542085500 , Turbo Part No.-5542087100 , Switch Part No.-5542089400 , Switch Part No.-5542089500 , Contactblock Part No.-5542089600 , Check Vlv Assy Part No.-5542089800 , Screw Part No.-5542093000 , Valve Part No.-5542093100 , Tube Part No.-5542099700 , Tube Part No.-5542099800 , Wiper Motor Part No.-5542107300 , Mount Part No.-5542110700 , Sequence Val Part No.-5542111200 , Fan Cover Part No.-5542113000 , Sensor Speed Part No.-5542113800 , Check Valve Part No.-5542118800 , Radiator Part No.-5542121100 , Rod Part No.-5550285100 , Lockcollar Part No.-5551122500 , Tube-Mountin Part No.-5551131800 , Collar Part No.-5551369700 , Mount Part No.-5551766700 , Rod Part No.-5552448100 , Kit-Gauge As Part No.-5552491700 , Lockcollar Part No.-5552574700 , Cap Part No.-5553234300 , Rod Part No.-5553279200 , Bracket Part No.-5553305300 , Washer Part No.-5553526000 , Spacer Part No.-5553616000 , Mounting Pla Part No.-5553658300 , Nut Part No.-5553676200 , Guard Part No.-5553825200 , Spacer Part No.-5554090100 , Gasket Part No.-5554245900 , Lock Device Part No.-5554534800 , Washer Part No.-5554620400 , Gasket Part No.-5555133400 , Spacer Part No.-5555213400 , Chain Part No.-5555258100 , Castle Nut Part No.-5555279800 , Washer Part No.-5555600700 , Fitting Part No.-5555710600 , Hinge Part No.-5555765400 , Washer Part No.-5556038500 , Plate Part No.-5556270400 , Bushing Part No.-5556287300 , Cap Part No.-5556287400 , Washer Part No.-5556287500 , Pin-Steering Part No.-5556294600 , Pin Part No.-5556295000 , Lever Part No.-5556296500 , Link Part No.-5556296900 , Link Part No.-5556297000 , Lever Part No.-5556539000 , Shift Ctrl Part No.-5556539400 , Bellcrank Part No.-5556539500 , Rod Part No.-5556539600 , Housing Part No.-5556542200 , Linkage Part No.-5556554300 , Link Part No.-5556559200 , Cap Part No.-5556722400 , Cover-Hinge Part No.-5556883100 , Lock Plate-H Part No.-5556901800 , Washer Part No.-5556901900 , Tube Part No.-5556964300 , Cover Part No.-5556969900 , Wear Ring Part No.-5557237100 , Collar Part No.-5557817100 , Pin Part No.-5557818600 , Tube Part No.-5557853600 , Bushing Part No.-5557853700 , Shim Part No.-5557892500 , Bearing Part No.-5557915600 , Mount Part No.-5558095500 , Bracket Part No.-5558140300 , Bar Part No.-5558232300 , Cover Part No.-5558305100 , Rod Part No.-5558422600 , Spacer Part No.-5558454800 , Spacer Part No.-5558578600 , Clamping Plate Part No.-5558638100 , Driveline Part No.-5558699300 , Driveline Part No.-5558699600 , Insert Part No.-5558714600 , Insert Part No.-5558714700 , Washer Part No.-5558721600 , Spacer Part No.-5558723700 , Driveline Part No.-5558764300 , Brace Part No.-5558818500 , Shrink Sleev Part No.-5558841900 , Mount Part No.-5558896200 , Mount Part No.-5558896300 , Fuse Holder Part No.-5558984300 , Retainer Pin Part No.-5559060900 , Guard Part No.-5559207400 , Guard Part No.-5559214800 , Guard Part No.-5559214900 , Guard Part No.-5559215000 , Fuse Holder Part No.-5559225600 , Block-Fuse Part No.-5559225700 , Bracket Part No.-5559321500 , Mount Part No.-5559352600 , Mount Part No.-5559368400 , Support Part No.-5559513200 , Driveline Part No.-5559640900 , Hose Holder Part No.-5559641800 , Tube Assy Part No.-5559755100 , Tube Part No.-5559755200 , Tube Part No.-5559755300 , Dump Control Part No.-5559758600 , Pivot Assy Part No.-5559758700 , Gasket Part No.-5559858600 , Ring, Wear Part No.-5559904700 , Mount Part No.-5559905400 , Flatwasher Part No.-5559923000 , Flatwasher Part No.-5559923100 , Washer Part No.-5559923300 , Flatwasher Part No.-5559923400 , Flatwasher Part No.-5559923600 , Washer Part No.-5559923800 , Flatwasher Part No.-5559923900 , Washer Part No.-5559924000 , Washer Part No.-5559924100 , Driveline Part No.-5559998700 , Pin Part No.-5560189100 , Tighten-Belt Part No.-5560393800 , Bushing Part No.-5560411900 , Driveline Part No.-5560428800 , Tube-Flex Ss Part No.-5560524100 , Mount Part No.-5560564600 , Control-Engi Part No.-5560579600 , Driveline Part No.-5560646200 , Pulley Part No.-5728202348 , Driveline Part No.-5560952900 , Cover Part No.-5560987400 , Nut Part No.-5561079900 , Washer Part No.-5561152300 , Wearing Ring Part No.-5561152400 , Tie Plate Part No.-5561234400 , Handle Part No.-5561325700 , Bellcrank Part No.-5561326900 , Gauge Assy Part No.-5561373601 , Gauge Part No.-5561373701 , Voltmeter Part No.-5561374301 , Gauge Part No.-5561374501 , Flange Part No.-5561411000 , Gasket Part No.-5561471400 , Bearing Part No.-5561477200 , Roller Part No.-5561477700 , Roller Part No.-5561477800 , Rod Part No.-5561547700 , Hose Part No.-5561632800 , Link Part No.-5561644600 , Weldment Part No.-5561681500 , Tie Point Part No.-5561695501 , Tube Part No.-5561712800 , Dipstick Part No.-5561713700 , Float Part No.-5561761100 , Level Sensor Part No.-5561806000 , Kit-Pump Part No.-5561847200 , Tube Part No.-5561854600 , Mount Part No.-5561881900 , Tube Part No.-5561895200 , Kit-Pump Part No.-5561991100 , Bushing Part No.-5562022100 , Tube-Flex Part No.-5562085300 , Sprocket-Mod Part No.-5562124900 , Pin Part No.-5562142100 , Roller Part No.-5562170600 , Drive Part No.-5562253400 , Reverser Mod Part No.-5562254000 , Driveline Part No.-5562269100 , Tube Part No.-5562309200 , Dipstick Part No.-5562466200 , Spacer Part No.-5562485400 , Sleeve Part No.-5562512200 , Mount Part No.-5562518200 , Tube Part No.-5562557300 , Dip Stick Part No.-5562557500 , Bus Bar Part No.-5562627900 , Bushing Part No.-5562712600 , Cable Part No.-5562733300 , Suction Pipe Part No.-5562769600 , Spacer Part No.-5563029700 , Spacer Part No.-5563040300 , Spacer Part No.-5563040400 , Spacer Part No.-5563040500 , Hose Mod Part No.-5563201500 , Weldment Part No.-5563512200 , Rod Part No.-5563558000 , Plate Part No.-5563644900 , Insulator Part No.-5563723300 , Wheel Flange Part No.-5563834800 , Support Part No.-5563874700 , Support Part No.-5563874800 , Rod Part No.-5563875000 , Cushion Part No.-5563922800 , Arm Part No.-5563957700 , Bracket Part No.-5563973600 , Link Part No.-5563974000 , Mount Part No.-5564012000 , Pin Part No.-5564051600 , Exhaust Deflect Part No.-5564128200 , Insert Part No.-5564213400 , Lever Part No.-5564261200 , Brake Part No.-5564375100 , J Block Part No.-5564441800 , Spacer Part No.-5564519600 , Cross Beam Part No.-5564533300 , Washer Part No.-5564538800 , Support Part No.-5564592600 , Lever Part No.-5564592900 , Rod Part No.-5564594500 , Seat Part No.-5564613200 , Sprocket Mod Part No.-5564622200 , Washer Part No.-5564662400 , Bushing Part No.-5564679200 , Manifold Part No.-5564702800 , Driveline Part No.-5564763400 , Spacer Part No.-5564803800 , Tube Part No.-5564814200 , Mount Wldmt Part No.-5564831000 , Pin-Cylinder Part No.-5564832700 , Mount-Cyl Part No.-5564832800 , Tube Part No.-5564993800 , Tube Part No.-5564993900 , Pin Part No.-5565047900 , Dipstick Mod Part No.-5565066900 , Mount Part No.-5565078000 , Hinge Pin Part No.-5565107300 , Accumulator Part No.-5565170200 , Guard Part No.-5565224100 , Junction Block Part No.-5565284800 , Wear Ring Part No.-5565365200 , J-Block Part No.-5565420100 , Block Part No.-5565452000 , Lamp Attachment Part No.-5565597300 , Purifier Part No.-5565615000 , Mount. Bracket Part No.-5565672000 , Valve Mod Part No.-5565680600 , Tube Assy-D/ Part No.-5565690100 , Guard Part No.-5565717100 , Kit-Gasket Part No.-5565734400 , Sleeve Part No.-5565768700 , Insert Part No.-5565787400 , Guard Part No.-5565807300 , Driveline Part No.-5565818700 , Junction Block Part No.-5565825700 , Bushing Part No.-5570003600 , Pin Weldment Part No.-5570075000 , Stab Pin Part No.-5570323700 , Spacer Part No.-5570331700 , Fitting Part No.-5570526300 , Pin Part No.-5570683900 , Block-Juncti Part No.-5570747000 , Lock-Up Valv Part No.-5570824600 , Insert Part No.-5570824800 , Driveline Part No.-5570825500 , Cover Part No.-5570827400 , Air Inlet Part No.-5570838500 , Door Part No.-5570854000 , Manifold Blo Part No.-5570871800 , Wheel Part No.-5570993300 , Spacer-Hoist Part No.-5571011400 , Tube Part No.-5571025800 , Shim Part No.-5571060300 , Hose-Rad Part No.-5571079000 , Hinge Part No.-5571085400 , Insert Part No.-5571085500 , Brg Retainer Part No.-5571085600 , Spacer Part No.-5571085700 , Spacer Part No.-5571085800 , Retainer Part No.-5571085900 , Adapter Part No.-5571128700 , Tube Part No.-5571130800 , Pin Part No.-5571131300 , Hinge Part No.-5571163200 , Hinge Part No.-5571163300 , Roller Assy Part No.-5571176800 , Stud Part No.-5571221100 , Mount Part No.-5571225700 , Mount Part No.-5571245000 , Inst-Swivel Part No.-5571333800 , Swivel Inst- Part No.-5571338000 , Rim Assy Part No.-5571347000 , Insert Part No.-5571352500 , Retainer Part No.-5571352600 , Retainer-Pin Part No.-5571352800 , Pin Part No.-5571352900 , Retainer-Pin Part No.-5571353000 , Shim Part No.-5571353100 , Shim Part No.-5571353200 , Shim Part No.-5571353300 , Shim Part No.-5571353400 , Insert-Hinge Part No.-5571395000 , Retainer Part No.-5571395100 , Insert-Lower Part No.-5571395200 , Insert Part No.-5571395300 , Insert-Bogie Part No.-5571395400 , Pin Part No.-5571395500 , Pin Retainer Part No.-5571395600 , Shim Part No.-5571397300 , Washer Part No.-5571399000 , Shim Part No.-5571406100 , Shim Part No.-5571406200 , Shim Part No.-5571406300 , Shim Part No.-5571406400 , Shim Part No.-5571450000 , Bushing Part No.-5571461900 , Inst-Swivel Part No.-5571489100 , Pressure Swi Part No.-5571492100 , Retainer Part No.-5571494800 , Retainer Part No.-5571494900 , Insert Part No.-5571499000 , Washer Part No.-5571504300 , Mod. Kit Part No.-5571512000 , Hose-Radiato Part No.-5571524600 , Driveline Part No.-5571591400 , Mount Part No.-5571623400 , Rubbermoulding Part No.-5571666800 , Rubbermoulding Part No.-5571666900 , Rubbermoulding Part No.-5571667000 , Rubbermoulding Part No.-5571667100 , Washer Part No.-5571668400 , Wear Ring Part No.-5571676900 , Spacer Part No.-5571677300 , Mount Part No.-5571710400 , Spacer Part No.-5571725400 , Tube Part No.-5571741500 , Tube Part No.-5571741600 , Tube Part No.-5571844000 , Manifold Part No.-5571852800 , Spacer/Shim Part No.-5571854700 , Gasket Part No.-5571855200 , Washer Part No.-5571859100 , Rod Part No.-5571863000 , Tube Part No.-5571873900 , Swivel Part No.-5571877400 , Converter Part No.-5571877800 , Hydr.Transmiss. Part No.-5571882700 , Cap Part No.-5571887600 , Shim Part No.-5571887700 , Plate Part No.-5571888900 , Lock Part No.-5571890200 , Mount Part No.-5571891100 , Mount Part No.-5571891200 , Junction Block Part No.-5571900700 , Manifold Part No.-5571900800 , Driveline Part No.-5571900900 , Driveline Part No.-5571901000 , Driveline Part No.-5571901200 , Mount Part No.-5571902700 , Tube Part No.-5571903600 , Tube Part No.-5571903800 , Tube Part No.-5571903900 , Mount Part No.-5571904200 , Mount Part No.-5571904300 , Wheel Assy Part No.-5571909100 , Fender Plate Part No.-5571910700 , Retainer Part No.-5571910800 , Fender Plate Part No.-5571910900 , Retainer Part No.-5571911000 , Retainer Part No.-5571911100 , Retainer Part No.-5571911200 , Gusset Part No.-5571911300 , Mount Part No.-5571913300 , Bracket Part No.-5571914700 , Dipstick Part No.-5571918700 , Tube Part No.-5571922300 , Tube Part No.-5571922400 , Tube Part No.-5571929600 , Tube Part No.-5571929700 , Tube Part No.-5571929800 , Cooler Part No.-5571933800 , Rim Compl. Part No.-5571934300 , Tube Part No.-5571934500 , Tube Part No.-5571934600 , Tube Part No.-5571934700 , Tube Part No.-5571934800 , Tube Part No.-5571936400 , Tube Part No.-5571936500 , Tube Part No.-5571936600 , Tube Part No.-5571936700 , Tube Part No.-5571939900 , Tube Part No.-5571940000 , Tube Part No.-5571940200 , Tube Part No.-5571940700 , Tube Part No.-5571940800 , Tube Part No.-5571940900 , Mount Part No.-5571942000 , Tube Part No.-5571942500 , Spacer Part No.-5571946000 , Spacer Part No.-5571946500 , Tube Part No.-5571954000 , Tube Part No.-5571954100 , Tube Part No.-5571954200 , Tube Part No.-5571954300 , Solenoid Valve Part No.-5571956100 , Mount Part No.-5571958700 , Tube Part No.-5571958800 , Tube Part No.-5571962300 , Tube Part No.-5571962600 , Tube Part No.-5571962700 , Tube Part No.-5571966200 , Shim - .010 Part No.-5571988300 , Shim - .020 Part No.-5571988400 , Shim - .040 Part No.-5571988500 , Solenoid Valve Part No.-5571997600 , Control Rod End Part No.-5571998600 , Hose-Intake Part No.-5572000700 , Cavity Plug Part No.-5572002900 , Sealing List Part No.-5572012500 , Lockcollar Part No.-5572039700 , Lockcollar-4 Part No.-5572040200 , Bulkhead Conn. Part No.-5572042400 , Cover, Wiggi Part No.-5572063600 , Flange Part No.-5572067500 , Gasket Part No.-5572071300 , Driveline Part No.-5572075500 , Driveline Part No.-5572075600 , Guard Part No.-5572081600 , Cylinder Part No.-5572116000 , Mount Part No.-5572150600 , Shim Part No.-5572163900 , Fender Ext Part No.-5572211800 , Fender Ext Part No.-5572211900 , Fender Exten Part No.-5572212000 , Fender Ext Part No.-5572212100 , Purifier Part No.-5572223100 , Bushing Part No.-5572278000 , Insert Part No.-5572278100 , Loop Part No.-5572304400 , Protect. Plate Part No.-5572304700 , Protect. Plate Part No.-5572304800 , Guide Part No.-5572308500 , Control Part No.-5572313700 , Guard Part No.-5572314000 , Lock-Bar Part No.-5572332700 , Gauge-Press Part No.-5572400000 , Voltmeter Part No.-5572400200 , Gauge-Press Part No.-5572400500 , Gauge-Press Part No.-5572400800 , Wiring Part No.-5572400900 , Pin-Hinge Part No.-5572419400 , Retainer-Brg Part No.-5572419500 , Spacer-Inner Part No.-5572419600 , Spacer-Inner Part No.-5572419700 , Retainer Part No.-5572419800 , Rod Part No.-5572473400 , Spacer Part No.-5572474700 , Mount Part No.-5572528000 , Shaft-Axle Part No.-5572537300 , Mount Part No.-5572538500 , Mount Part No.-5572538700 , Seat Belt Part No.-5572551100 , Rail Part No.-5572561600 , Divider Bloc Part No.-5572564500 , Kit-Engine S Part No.-5572586400 , Rod Part No.-5572600600 , Inst-Control Part No.-5572619800 , Switch-Speed Part No.-5572641100 , Control Box Part No.-5572646900 , Cable Part No.-5572647400 , Cable Part No.-5572647500 , Installation Part No.-5572647900 , Spacer Part No.-5572655300 , Retainer Part No.-5572655500 , Hose-Rad Part No.-5572666300 , Shim Part No.-5572668100 , Stop-Axle Part No.-5572681300 , Tube Part No.-5572682900 , Cap Part No.-5572683000 , Shim Part No.-5572683100 , Tank-Surge Part No.-5572685200 , Tube-Dump/St Part No.-5572688400 , Tube-Brake S Part No.-5572689400 , Tube-Brake R Part No.-5572689500 , Tube Part No.-5572689900 , Tube Part No.-5572690300 , Tube-Dump Part No.-5572690400 , Tube-Steer Part No.-5572692100 , Tube-Steer Part No.-5572692200 , Tube Part No.-5572692900 , Tube Part No.-5572693000 , Tube-Brake C Part No.-5572693200 , Tube-Brake C Part No.-5572693400 , Tube-Brake C Part No.-5572693500 , Shim Part No.-5572717900 , Cover-Weld Part No.-5572742200 , Block Assy-F Part No.-5572814400 , Hose-Rad Part No.-5572824200 , Mount-Cyl Part No.-5572832900 , Rod Part No.-5572842500 , Tube Part No.-5572864300 , Dipstick Part No.-5572864600 , Driveline Part No.-5572903100 , Mount Part No.-5572920300 , Insert Part No.-5572935200 , Insert Part No.-5572935300 , Guard Part No.-5572954200 , Tube Assy Part No.-5572956100 , Tube Assy Part No.-5572956200 , Tube Assy Part No.-5572956300 , Tube Assy Part No.-5572956400 , Tube Assy Part No.-5572956500 , Gasket Part No.-5572971700 , Ramp Part No.-5572981600 , Mount Part No.-5573041300 , Shim Part No.-5573049600 , Mount Part No.-5573058400 , Block Part No.-5573068700 , Divider Bloc Part No.-5573071200 , Divider Bloc Part No.-5573071300 , Insulation Part No.-5573072300 , Pedal Part No.-5573078100 , Mount-Pedal Part No.-5573078500 , Mount Part No.-5573090800 , Mount Part No.-5573090900 , Tube Assy Part No.-5573093200 , Driveline Part No.-5573096100 , Driveline Part No.-5573096200 , Flap-Rubber Part No.-5573097200 , Cable Part No.-5573097500 , Pressure Switch Part No.-5573097700 , Stud Part No.-5573107400 , Tube Bend Part No.-5573114500 , Driveline Part No.-5573141100 , Tube Part No.-5573177200 , Block-Div Part No.-5573178400 , Hydraulic Block Part No.-5573178500 , Block-Port Part No.-5573202800 , Proximity Sw Part No.-5573207500 , Switch - Part No.-5573219800 , Tie Plate Part No.-5573223300 , Sleeve Part No.-5573226500 , Spacer Part No.-5573226600 , Tube Part No.-5573229200 , Plate Part No.-5573234500 , Guard Part No.-5573240700 , Pin-Tailgate Part No.-5573245000 , Switch Part No.-5573246800 , Press Switch Part No.-5573246900 , Guard Part No.-5573289300 , Lamp Part No.-5573297500 , Seat Back Part No.-5573331200 , Mount Part No.-5573338100 , Shift Contro Part No.-5573342500 , Dipstick Part No.-5573348900 , Visual Alarm Part No.-5573354500 , Harness Part No.-5573355000 , Harness- Part No.-5573355100 , Dipstick Part No.-5573359100 , Wheel Assy-2 Part No.-5573371500 , Hanger Wldmt Part No.-5573379000 , Spacer Part No.-5573380000 , Spacer Part No.-5573380200 , Dipstick Part No.-5573394000 , Tube-Wldmt Part No.-5573394200 , Spacer Part No.-5573414800 , Slide Part No.-5573425300 , Harness-Diag Part No.-5573454200 , Busbar Part No.-5573471300 , Washer Mod Part No.-5573471400 , Cable Part No.-5573476600 , Accel. Pedal Part No.-5573476700 , Harness Part No.-5573532000 , Harness-Tran Part No.-5573533400 , Harness Part No.-5573533500 , Harness-Tran Part No.-5573534400 , Bush-Dry Part No.-5573546500 , Transducer A Part No.-5573550700 , Battery Isol Part No.-5573556100 , Driveline Part No.-5573607500 , Drive Line Part No.-5573607600 , Driveline As Part No.-5573615200 , Driveline Part No.-5573615500 , Driveline As Part No.-5573615600 , Light-Overhd Part No.-5573625900 , Harness-Alt Part No.-5573631200 , Rod-Ctrl Part No.-5573631600 , Face Plate-I Part No.-5573656100 , Gasket-F Part No.-5573656200 , Plate-Face Part No.-5573656300 , Gasket- Part No.-5573656400 , Harness-Eng Part No.-5573657300 , Fender Ext-R Part No.-5573670400 , Drive Line Part No.-5573673200 , Driveline Part No.-5573673500 , Spacer-Brg Part No.-5573674300 , Shim Part No.-5573685400 , Inst-Shim Part No.-5573686500 , Mount Part No.-5573696700 , Wear Plate Part No.-5573712400 , Pin Assy Part No.-5573735000 , Inst-Pin Part No.-5573736600 , Junction Block Part No.-5573768400 , Shaft-Fan Part No.-5573770100 , Carrier-Brg Part No.-5573770200 , Spacer/Nut Part No.-5573775800 , Shim Part No.-5573776000 , Shim Part No.-5573776200 , Insert Part No.-5573794300 , Cable Part No.-5573795700 , Brake Part No.-5573823800 , Foot Brake Part No.-5573824100 , Spacer Part No.-5573824500 , Pin Part No.-5573824600 , Pin Part No.-5573824700 , Instrument Panel Part No.-5573828300 , Tube Weldmen Part No.-5573837000 , Block Part No.-5573978000 , Tube Part No.-5573988000 , Driveline Part No.-5574038200 , Boss Part No.-5574041300 , Cover Assy Part No.-5574044600 , Mount-Drivel Part No.-5574044800 , Boss Part No.-5574045600 , Driveline Part No.-5574055700 , Mount Part No.-5574077100 , Cap Part No.-5574096700 , Mount-Alt Part No.-5574107300 , Bracket Part No.-5574123900 , Pin-Chrome Part No.-5574160000 , Pin, 114.3X3 Part No.-5574172200 , Tube Part No.-5574185100 , Support Part No.-5574185300 , Intake Mount Part No.-5574185400 , Rod Part No.-5574236600 , Tube Part No.-5574241800 , Tube Part No.-5574241900 , Switch Mod-T Part No.-5574245000 , Valve Part No.-5574246000 , Plate-Lift Part No.-5574246400 , Valve-Aux Part No.-5574246900 , Hump Hose Part No.-5574256400 , Retainer Part No.-5574256700 , Cover Part No.-5574257100 , Pin-70Mm Dia Part No.-5574257900 , Spacer Part No.-5574258000 , Spacer Part No.-5574264100 , Mount Part No.-5574265100 , Adapter Part No.-5574287500 , Kit-Horn Part No.-5574287600 , Horn Part No.-5574287700 , Brake Pedal Part No.-5507398800 , Wheel Assy Part No.-5574310000 , Block Part No.-5574324500 , Block Part No.-5574324600 , Mount Part No.-5574325400 , Cylinder Part No.-5574326000 , Rod-Adjustng Part No.-5574335500 , Strobe Mod Part No.-5574338900 , Reverse Alarm Part No.-5574339000 , Mount Part No.-5574362700 , Wheel Assy Part No.-5574364500 , Harness-A/V Part No.-5574467600 , Tube Part No.-5574475400 , Tube Part No.-5574475500 , Tube Part No.-5574475600 , Tube Part No.-5574475700 , Tube Mount Part No.-5574475800 , Osc Axle Wel Part No.-5574476600 , Tube Wlmt Part No.-5574476800 , Exhaust Wrap Part No.-5574477800 , Tube Assy - Part No.-5574480000 , Harness Part No.-5574489000 , Dip Stick Part No.-5574510500 , Dip Stick Part No.-5574512800 , Protection Roof Part No.-5574522100 , Hinge Part No.-5574525900 , Hinge Part No.-5574526000 , Washer Part No.-5574535300 , Seat Part No.-5574535600 , Iso Switch Part No.-5574539100 , Kit-Dipstick Part No.-5574543600 , Cap Part No.-5574549700 , Cap Part No.-5574579400 , Valve Part No.-5574602700 , Guard Part No.-5574618100 , Guard Part No.-5574618500 , Rod Part No.-5574638600 , Spacer Part No.-5574652100 , Harness-Hyd Part No.-5574662200 , Tube Assy-Ho Part No.-5574668600 , Tube Assy-Ho Part No.-5574668700 , Stab Guard W Part No.-5574675300 , Spacer Part No.-5574676200 , Spacer Part No.-5574676300 , Swiwel Part No.-5574677400 , Driveline Part No.-5574677800 , Driveline Part No.-5574677900 , Driveline Part No.-5574678000 , Driveline Part No.-5574678100 , Driveline Part No.-5574678200 , Baffle-Rubbe Part No.-5574679400 , Dogbone Part No.-5574680600 , Tube-Rad Low Part No.-5574681700 , Pin-Hinge Part No.-5574682800 , Bearing Reta Part No.-5574682900 , Spacer Part No.-5574683000 , Tube/Shell C Part No.-5574683300 , Upbox Mod-Su Part No.-5574689400 , Tube Part No.-5574704800 , Plate Part No.-5574705500 , Hose-Rad Part No.-5574712900 , Clip Part No.-5574715200 , Tube-Suction Part No.-5574716100 , Tube Part No.-5574735300 , Tube Part No.-5574735400 , Tube Part No.-5574735500 , Step Part No.-5574745100 , Tube - Part No.-5574745600 , Mount Part No.-5574749000 , Driveline-9C Part No.-5574749900 , Step Part No.-5574750000 , Harness Part No.-5574761000 , Weldment Part No.-5574768900 , Weldment Part No.-5574769000 , Cover Part No.-5574775500 , Pad Part No.-5574788000 , Hose-Rad Part No.-5574791800 , Tube Assy-Di Part No.-5574802900 , Harness-Back Part No.-5574815700 , Driveline As Part No.-5574826800 , Tube Wldmt Part No.-5574841900 , Tube-Dipstic Part No.-5574842100 , Switch Assy Part No.-5574843700 , Breather Hos Part No.-5574847200 , Mount Part No.-5574847900 , Cap Part No.-5574859100 , D&H Valve As Part No.-5574869900 , Plate Part No.-5574874200 , Stud- Part No.-5574879600 , Tube Wldmt Part No.-5574883100 , Gasket-Instr Part No.-5574906200 , Harness Part No.-5574910600 , Harness Part No.-5574911600 , Harness-Ecm Part No.-5574911900 , Harness Part No.-5574912800 , Harness Part No.-5574913100 , Harness Part No.-5574913800 , Switch Box A Part No.-5574928300 , Dipstick Mod Part No.-5574935000 , Dipstick Part No.-5574935100 , Dipstick Part No.-5574935200 , Dipstick Part No.-5574935300 , Tube Wldmt Part No.-5574935400 , Valve-Div Part No.-5574941500 , Block Div Part No.-5574968400 , Dip Stick Part No.-5574975700 , Switch Box A Part No.-5574977800 , Pin-Bucket Part No.-5575000900 , Rest Pad Part No.-5575016200 , Restpad Cage Part No.-5575016300 , Plate Part No.-5575016400 , Fender Ext-R Part No.-5575026800 , Light Assy Part No.-5575031100 , Switch Part No.-5575045000 , Pin-Dogbone Part No.-5575045900 , Harness Part No.-5575050400 , Mount Part No.-5575052800 , Trans Trunni Part No.-5575063100 , Tube Assy Part No.-5575065200 , Rh Mirror Mo Part No.-5575068500 , Mount Part No.-5575070000 , Kit-Relay Part No.-5575089300 , Hinge Wdmt Part No.-5575094500 , Gauge Mod-Fu Part No.-5575096000 , Driveline Part No.-5575096600 , Spacer Part No.-5575099600 , Mount-Rad Bo Part No.-5575111700 , Converter Part No.-5575113973 , Converter Part No.-5575114800 , Pulley-Fan Part No.-5575130600 , Converter Part No.-5575153400 , Harness-#3 W Part No.-5575160200 , Plc Assy Part No.-5575162400 , Hood Weldmen Part No.-5575168100 , Pressurizer Part No.-5575175900 , Gasket Part No.-5575176000 , Gasket Part No.-5575176100 , Washer Plate Part No.-5575176500 , Plc Assy Part No.-5575185800 , Mount-Oil Co Part No.-5575189100 , Prop Bar-Hoo Part No.-5575194500 , Switch Mod Part No.-5575209400 , Strip Part No.-5575211500 , Strip-Bulb & Part No.-5575211600 , Tube Part No.-5575212000 , Tube Part No.-5575212200 , Tube Part No.-5575212300 , Strip-Bulb & Part No.-5575212600 , Component Bo Part No.-5575216000 , Harness-Alli Part No.-5575216100 , Harness Part No.-5575216200 , Harness Part No.-5575216500 , Switch Assy- Part No.-5575217900 , Tube-Dipstic Part No.-5575229600 , Block Part No.-5575230300 , Strip-Bulb & Part No.-5575230700 , Plate-Spacer Part No.-5575231600 , Guide Wldmt- Part No.-5575232300 , Harness Part No.-5575233400 , Harness-Rear Part No.-5575233500 , Harness Part No.-5575233600 , Harness Part No.-5575233900 , Harness Part No.-5575234000 , Harness Part No.-5575234100 , Fuse Block A Part No.-5575240100 , Pin Assy Part No.-5575249900 , Converter Part No.-5575265800 , Block Part No.-5575277400 , Block Part No.-5575277500 , Mount Part No.-5575277700 , Support Part No.-5575279400 , Plc System Part No.-5575281800 , Mod. Kit Part No.-5575282600 , Mount Part No.-5575285600 , Switch Part No.-5575286500 , Pin Assy-Swi Part No.-5575298600 , Tube Part No.-5575311400 , Tube Part No.-5575311500 , Swivel Inst Part No.-5575313200 , Harness Part No.-5575313800 , Harness-Alli Part No.-5575314300 , Mount-Booms Part No.-5575316500 , Wldmt-Boom S Part No.-5575317100 , Tube Assy Part No.-5575320700 , Tube Part No.-5575327300 , Spped Indica Part No.-5575327700 , Tube Part No.-5575328800 , Tube Part No.-5575328900 , Driveline Part No.-5575329600 , Fender Part No.-5575330300 , Fender Part No.-5575331100 , Tube Part No.-5575338200 , Swivel Lock Part No.-5575339700 , Mount Part No.-5575345200 , Tube Wldmt E Part No.-5575345500 , Tube Assy - Part No.-5575345600 , Mount-Fill P Part No.-5575346800 , Tube-Spacer Part No.-5575360700 , Valve-Auxili Part No.-5575369000 , Mount Plate Part No.-5575391600 , Drive Line Part No.-5575391700 , Driveline Part No.-5575391800 , Drive Line Part No.-5575391900 , Couple Part No.-5575398300 , Rrc System Part No.-5575398400 , Wiper Part No.-5575401000 , Elbow-Rubber Part No.-5575409100 , Harness Part No.-5575410300 , Harness Part No.-5575411200 , Harness Part No.-5575411300 , Mount Part No.-5575413400 , Rubbermouldi Part No.-5575415800 , Suction Pipe Part No.-5575415900 , Cover Plate Part No.-5575420200 , Support Part No.-5575421100 , Steel Fender Part No.-5575422900 , Mount Bar Part No.-5575462100 , Tube-1.25 In Part No.-5575471900 , Tube-1.25 In Part No.-5575472000 , Switch Box Part No.-5575473200 , Harness Part No.-5575476900 , Harness Door Part No.-5575477300 , Kit-Gauge Part No.-5575477400 , Gasket Part No.-5575479300 , Mount-Bulb & Part No.-5575482500 , Mounting Pla Part No.-5575488100 , Plc Part No.-5575492100 , Harness A7 Part No.-5575502300 , Baffle Plate Part No.-5575506100 , Column Steer Part No.-5575506900 , Valve Part No.-5575511100 , Control-Gear Part No.-5575522200 , Pressure Swi Part No.-5575524400 , Cover Set Part No.-5575525300 , Plc System Part No.-5575528100 , Harness Part No.-5575528800 , Strap Part No.-5575548400 , Grill Part No.-5575549000 , Plate Part No.-5575549100 , Grill Part No.-5575549500 , Hood Part No.-5575549605 , Hood Part No.-5575549661 , Protection Hood Part No.-5575549700 , Protection Hood Part No.-5575549900 , Radiator Unit Part No.-5575551500 , Wiper Part No.-5575551800 , Wiper Part No.-5575551900 , Accumulat.Block Part No.-5575564300 , Accumulat.Block Part No.-5575564400 , Dipstick Part No.-5575564500 , Gasket Part No.-5575577400 , Exhaust Prot Part No.-5575581700 , Gasket Part No.-5575583100 , Mount Part No.-5575585000 , Converter 24 Part No.-5575590900 , Tube Part No.-5575592400 , Tube Part No.-5575592600 , Wear Bar Part No.-5575597100 , Wear Bar Part No.-5575597500 , Mount Part No.-5575599400 , Dipstick Part No.-5575614300 , Tube-Cac Part No.-5575620300 , Guard Part No.-5575627300 , Mount Part No.-5575629200 , Rubbermouldi Part No.-5575631900 , Vaxelstr.Gen Part No.-5575632000 , Driveline Gu Part No.-5575635800 , Cooler-Fuel Part No.-5575639000 , Tube-Cac Part No.-5575639500 , Junction Block Part No.-5575640000 , Purifier Part No.-5575700040 , Harness Part No.-5575700053 , Manipulator Part No.-5575700121 , Plc System Part No.-5575700122 , Light Set Part No.-5575700259 , Wheel Compl. Part No.-5575700270 , Insert Part No.-5575700275 , Fender Part No.-5575700314 , Harness Part No.-5575700327 , Yoke Part No.-5575700369 , Spacer Part No.-5575700373 , Kit Hourmet Part No.-5575700376 , Driveline Part No.-5575700377 , Driveline Part No.-5575700378 , Attachment Part No.-5575700381 , Tube Part No.-5575700386 , Attachment Part No.-5575700398 , Mount Part No.-5575700408 , Washer Part No.-5575700409 , Tube Part No.-5575700490 , Holder Part No.-5575700575 , Dip Stick Part No.-5575700577 , Contact Bloc Part No.-5575700579 , Switch Part No.-5575700580 , Harness Part No.-5575700611 , Harness Part No.-5575700612 , Valve Part No.-5575700645 , Spacer Part No.-5575700657 , Speed Switch Part No.-5575700701 , Stud Part No.-5575700719 , Mount Part No.-5575700732 , Fender Part No.-5575700861 , Guard Part No.-5575700864 , Dipstick Tub Part No.-5575700873 , Dipstick Part No.-5575700874 , Spacer Part No.-5575700902 , Insert Part No.-5575700910 , Insert Part No.-5575700922 , Strip-Bulb & Part No.-5575700946 , Press Sensor Part No.-5575700947 , Press.Sens Kit Part No.-5575700948 , Harness-Gaug Part No.-5575700986 , Gear Ring Part No.-5575700998 , Kit Part No.-5575701044 , Fender Assy- Part No.-5575701073 , Harness Part No.-5575701096 , Harness Part No.-5575701099 , Insulation E Part No.-5575701173 , Drain Hose Part No.-5575701276 , Valve Part No.-5575701302 , Valve Part No.-5575701311 , Frame Part No.-5575701316 , Front Harnes Part No.-5575701325 , Jordkabel Part No.-5575701338 , Solenoid Val Part No.-5575701420 , Silencer Cov Part No.-5575701450 , Exhaust Cove Part No.-5575701452 , Exhaust Cove Part No.-5575701493 , Insert-Beari Part No.-5575701753 , Pipe Part No.-5575701830 , Valve Part No.-5575701840 , Wearing Ring Part No.-5575701847 , Link-Stabilizer Part No.-5575701916 , Pipe Part No.-5575701991 , Pipe Part No.-5575702002 , Mount Part No.-5575702052 , Hydr.Hose Part No.-5580000025 , Cable Part No.-5580000038 , Cable Part No.-5580000043 , Cable Part No.-5580000044 , Cable Part No.-5580000045 , Cable Part No.-5580000047 , Cable Part No.-5580000048 , Cable Part No.-5580000086 , Cable Part No.-5580000087 , Cable Part No.-5580000090 , Cable Part No.-5580000091 , Cable Part No.-5580000848 , Cable Part No.-5580000849 , Cable Part No.-5580000851 , Cable Part No.-5580000853 , Cable Part No.-5580000861 , Wire Part No.-3176000662 , Cable Part No.-5580000927 , Hose Part No.-5580000992 , Hose Part No.-5580000995 , Shrinking Tub. Part No.-5580001029 , Spiral Hose Part No.-5580001100 , Spiral Wrap Part No.-5580001101 , Shrinking Tub. Part No.-5580001153 , Pyro-Tape Part No.-5580001176 , Seal Part No.-5580001182 , Cable Part No.-5580001185 , Seal-Window Part No.-5580001191 , Heat Shrink.Bo. Part No.-5580001221 , Cable Part No.-5580001319 , Cylinder Part No.-5728202220 , Rubber Profi Part No.-5580002111 , Rubber Profi Part No.-5580002112 , Disc Part No.-5580002122 , Disc Part No.-5580002186 , Harness Part No.-5580002194 , Mudguard Part No.-5580002249 , Seal Kit Part No.-5580002334 , Shaft-Axle Part No.-5580002371 , Solenoid Part No.-5580002387 , Valve-Counte Part No.-5580002472 , Protection C Part No.-5580002475 , Protection C Part No.-5580002476 , Key Ring Part No.-5580002478 , Seal Part No.-5580002480 , Valve Part No.-5580002481 , Washer Part No.-5580002483 , Wiper Arm Part No.-5580002486 , Wiper Arm Part No.-5580002487 , Nozzle Set Part No.-5580002495 , Wiper Blade Part No.-5580002496 , Protection Part No.-5580002502 , Hinge Part No.-5580002503 , Spring Part No.-5580002511 , Spring Part No.-5580002512 , Iso Mount Part No.-5580002514 , Harness Part No.-5580002516 , Attachment Part No.-5580002517 , Cap Part No.-5580002536 , Hinge Part No.-5580002538 , Shaft Part No.-5580002541 , Shaft Part No.-5580002542 , Protect. Shi Part No.-5580002554 , Wiper Motor Part No.-5580002577 , Wiper Part No.-5580002600 , Wiper Part No.-5580002601 , Wiper Part No.-5580002602 , Wiper Part No.-5580002603 , Valve Part No.-5580002660 , Valve Set Part No.-5580002675 , Wiper Part No.-5580002678 , Wiper Part No.-5580002679 , Wiper Part No.-5580002683 , Valve Block Part No.-5580002685 , Cable Part No.-5580002693 , Cable Part No.-5580002700 , Wiperblade Part No.-5580002754 , Pane Part No.-5580002757 , Pane Part No.-5580002758 , Piston Part No.-5580002771 , Piston Rod Part No.-5580002772 , Cover Part No.-5580002773 , Seal Kit Part No.-6060011087 , Piston Rod Part No.-5580002785 , Valve Part No.-5580002795 , Hydraulic Pu Part No.-5580002811 , Harness Part No.-5580002812 , Harness Part No.-5580002813 , Harness Part No.-5580002814 , Harness Part No.-5580002815 , Harness Part No.-5580002848 , Harness Part No.-5580002849 , Pane Part No.-5580002989 , Pane Part No.-5580002991 , Pane - Left Part No.-5580002994 , Shim Part No.-5580003037 , Mount Bracke Part No.-5580003057 , Switch Panel Part No.-5580003120 , Geared Pump Part No.-5580003156 , Valve Set Part No.-5580003220 , Valve Block Part No.-5580003285 , Hudraulic Pu Part No.-5580003299 , Hydraulic Pu Part No.-5580003305 , Element Part No.-5580003404 , Driveline Part No.-5580003411 , Driveline Part No.-5580003412 , Driveline Part No.-5580003413 , Cap Holder Part No.-5580003414 , Coupling Part No.-5580003422 , Cap Part No.-5580003423 , Plug Part No.-5580003426 , Plug Part No.-5580003427 , Plug Part No.-5580003428 , Plug Part No.-5580003430 , Plug Part No.-5580003431 , Counter Bala Part No.-5580003433 , Cartridge Part No.-5580003437 , Plug Part No.-5580003438 , Plug Part No.-5580003440 , Link Part No.-5580003471 , Pressure Swi Part No.-5580003476 , Pane Part No.-5580003527 , Stab Sensor Part No.-5580003628 , Hose Part No.-5580003664 , Tube Part No.-5580003690 , Cooler Assy Part No.-5580003693 , Steer Pin Part No.-5580003726 , Steer Pin Part No.-5580003727 , Adapter Flange Part No.-5580003737 , Hook Compl. Part No.-5580003750 , Brake Valve Part No.-5580003754 , Clutch Part No.-5580003776 , Couple Part No.-5580003812 , Cable Part No.-5580003857 , Cable Part No.-5580003860 , Cable Part No.-5580003861 , Cable Part No.-5580003863 , Cable Part No.-5580003864 , Cable Part No.-5580003865 , Exhaust Tube Part No.-5580003870 , Trunnion Cap Part No.-5580003875 , Trunnion Cap Part No.-5580003880 , Mount.Retain Part No.-5580003886 , Mount Part No.-5580003897 , Lubr. Valve Part No.-5580003915 , Valve Part No.-5580003916 , Lubr. Valve Part No.-5580003938 , Pump Part No.-5580003952 , Exhaust Pipe Part No.-5580003967 , Brake Valve Part No.-5580003986 , Disc Clutch Part No.-5580004025 , Piston Ring Part No.-5580004026 , Spring Part No.-5580004027 , Bearing Part No.-5580004029 , Damper Part No.-5580004040 , Check Valve Part No.-5580004046 , Shaft Compl. Part No.-5580004049 , Ring-Retaini Part No.-5580004054 , Snap Ring Part No.-5580004056 , Retainer Rin Part No.-5580004058 , Spacer Part No.-5580004059 , Spacer Part No.-5580004062 , Assy - Disc Part No.-5580004063 , Clutch Speed Part No.-5580004072 , Control Valv Part No.-5580004083 , Spring Part No.-5580004084 , Gasket Part No.-5580004092 , Spring Part No.-5580004093 , Fuel Filter Part No.-5580004128 , Ventil Part No.-5580004133 , Pump Part No.-5580004147 , Wiper Engine Part No.-5580004278 , Wiper Arm Part No.-5580004280 , Wiper Motor Part No.-5580004281 , Wiper Blade Part No.-5580004282 , Wiper Arm Part No.-5580004283 , Water Pump S Part No.-5580004284 , Breather Fil Part No.-5580004291 , Spacer Ring Part No.-5580004359 , Pin Latch Le Part No.-5580004383 , Valve Assy Part No.-5580004560 , Gasket Part No.-5580004580 , Spring Set Part No.-5580004589 , Insert Part No.-5580004594 , Strip Part No.-5580004606 , Terminal-Spa Part No.-5580004622 , Insert Part No.-5580004693 , Plate Part No.-5580004719 , Solenoid Part No.-5580004725 , Cover Part No.-5580004740 , Disk Set Part No.-5580004741 , Washer Part No.-5580004746 , Diff Pinion Part No.-5580004748 , Oil Seal Ret Part No.-5580004750 , Diff Kit Part No.-5580004751 , Thrust Washe Part No.-5580004814 , Exhaust Part Part No.-5580004864 , Exhaust Bend Part No.-5580004866 , Klamma Part No.-5580004869 , Flexible Hos Part No.-5580004870 , Radiator Mou Part No.-5580004879 , Cradle Part No.-5580004898 , Mount Part No.-5580004902 , Pump Part No.-5580004904 , Keypad Compl Part No.-5580004961 , Knob Part No.-5580004977 , Switch Part No.-5580004979 , Wiper Compl. Part No.-5580004987 , Attacment Part No.-5580005114 , Trunnion Cap Part No.-5580005143 , Trunnion Cap Part No.-5580005146 , Trunnion Cap Part No.-5580005148 , Trunnion Cap Part No.-5580005150 , Fuse Holder Part No.-5580005180 , Cable Part No.-5580005181 , Harness Part No.-5580005191 , Rubber Mat Part No.-5580005199 , Mount Part No.-5580005203 , Attachment Part No.-5580005249 , Spacer Part No.-5580005253 , Spacer, Star Part No.-5580005260 , Wiper Arm Part No.-5580005284 , Blower Part No.-5580005290 , Drive Arm -8 Part No.-5580005351 , Dipstick Tub Part No.-5580005357 , Dipstick Part No.-5580005358 , Kontakt Part No.-5580005362 , Stift Part No.-5580005363 , Drop Box -16 Part No.-5580005450 , Upbox Part No.-5580005452 , Housing Part No.-5580005480 , Lub Nipple Part No.-5580005498 , Drive Line-C Part No.-5580005503 , Seal Kit Part No.-5580005516 , Seal Kit Part No.-5580005517 , Ring Gear Bo Part No.-5580005524 , Seal Kit Part No.-5580005540 , Wiper Blade Part No.-5580005556 , Back-Up Ring Part No.-0661150049 , Retaining Ri Part No.-0335212200 , Cable Part No.-5580005617 , Flange Part No.-5580005619 , Sealing Part No.-5580005660 , Tube Radiato Part No.-5580005678 , Radiator St2 Part No.-5580005682 , Press.Transduc. Part No.-5580005686 , Cable Part No.-5580005688 , Switch Box Part No.-5580005691 , Pane Part No.-5580005695 , Press.Transduc. Part No.-5580005761 , Diff.Kit Part No.-5580005772 , Shim Part No.-5580005803 , Shim Part No.-5580005804 , Ventil D/H/S Part No.-5580005837 , Valve Kit Part No.-5580005863 , Stretch Scre Part No.-5580005868 , Cover Part No.-5580005873 , Sensor Part No.-5580005874 , Tubes, V-Fin Part No.-5580005876 , Tubes, V-Fin Part No.-5580005877 , Support Bar Part No.-5580005878 , Mount Part No.-5580005896 , Seal Kit Part No.-5580005926 , Givarhuvud Part No.-5580005951 , Friction Dis Part No.-5580006011 , Cooler Part No.-5580006043 , Seal Kit Part No.-5580006067 , Cartridge Part No.-5580006080 , Seal Kit Part No.-5580006089 , Piston Pump Part No.-5580006108 , Rim Part No.-5580006118 , Bracket Part No.-5580006122 , Valve Block Part No.-5580006153 , Gear/Pinion Part No.-5580006192 , Seal Kit Part No.-5580006197 , Seal Part No.-5580006198 , Seal Part No.-5580006199 , Seal Part No.-5580006200 , Valve Part No.-5580006201 , Valve Part No.-5580006202 , Valve Part No.-5580006203 , Valve Part No.-5580006204 , Body Part No.-5580006235 , Tube Part No.-5580006265 , Switch Panel Part No.-5580006379 , Panel Plate Part No.-5580006382 , Tube-Transm Part No.-5580006412 , Attachm. Pla Part No.-5580006437 , Control Valv Part No.-5580006442 , Rorvinkel Part No.-5580006447 , Valve Part No.-5580006483 , Spacer Part No.-5580006504 , Support Part No.-5580006511 , Support Part No.-5580006512 , Harness Part No.-5580006541 , Relief Valve Part No.-5580006552 , Relief Valve Part No.-5580006553 , Relief Valve Part No.-5580006554 , Harness Part No.-5580006559 , Frame Part No.-5580006569 , Pipe Part No.-5580006580 , Sensor Part No.-5580006581 , Gummislang Part No.-5580006589 , Silicone Con Part No.-5580006591 , Thermostat Part No.-5580006614 , Pump Part No.-5580006616 , Gasket Part No.-5580006618 , Gasket Part No.-5580006619 , Sensor Part No.-5580006633 , Sensor Part No.-5580006636 , Sensor Part No.-5580006637 , Sensor Part No.-5580006643 , Trunnion Cap Part No.-5580006769 , Switch Part No.-5580006802 , Temp.Regulat Part No.-5580006808 , Link Part No.-5580006848 , Tube Part No.-5580006853 , Tube Part No.-5580006854 , Tube Part No.-5580006857 , Bearing Reta Part No.-5580006868 , Brake Pedal Part No.-5580006876 , Overfall Part No.-5580006883 , Shaft Part No.-5580006961 , Shaft Part No.-5580006966 , Bolt Part No.-5580006967 , O-Ring Part No.-5580006968 , Return Filte Part No.-5580006996 , Driveline 6C Part No.-5580007007 , Washer Part No.-5580007018 , Pinion Part No.-5580007020 , Screen Part No.-5580007046 , Distans St7 Part No.-5580007053 , Shims Part No.-5580007117 , Shims Part No.-5580007118 , Shims Part No.-5580007119 , Shims Part No.-5580007120 , Spacer Ring Part No.-5580007135 , Lock Pin Part No.-5580007140 , Valve Block Part No.-5580007152 , Valve Block Part No.-5580007154 , Mount Part No.-5580007218 , Impact Socke Part No.-5580007284 , Block Part No.-5580007300 , Gearpump Part No.-5580007327 , O-Ring Part No.-5580007334 , Cushion Part No.-5580007339 , Cushion Part No.-5580007340 , Gear Part No.-5580007343 , Bellow Part No.-5580007344 , Swing Arm Part No.-5580007348 , Arm Rest Part No.-5580007351 , Arm Rest Part No.-5580007352 , Insats Part No.-5580007355 , Gear Motor Part No.-5580007375 , Cap Holder Part No.-5580007417 , Switch Part No.-5580007447 , Lamp Part No.-5580007448 , Pump Set Part No.-5580007469 , Attachment Part No.-5580007470 , Coil Part No.-5580007484 , Reverse Alarm Part No.-5580007514 , Reverse Alar Part No.-5580007516 , Kugghjulspum Part No.-5580007524 , Attachment Part No.-5580007611 , Rubber Packi Part No.-5580007669 , Rubber Packi Part No.-5580007670 , Rubber Prote Part No.-5580007683 , Collar Part No.-5580007693 , Cap Part No.-5580007694 , Cover Part No.-5580007695 , O-Ring Set Part No.-5580007696 , Seal Part No.-5580007698 , Solenoid Part No.-5580007701 , Pump Part No.-5580007702 , Bearing Part No.-5580007703 , Bom Stands Part No.-5580007715 , Ehaust Elbow Part No.-5580007807 , Steer Pin Part No.-5580007828 , Fuel Filter Part No.-6060008044 , Filter Compl. Part No.-5580007866 , Expanding Sh Part No.-5580007875 , Expanding Sh Part No.-5580007876 , Lamp Part No.-5580007890 , Dipstick, Tr Part No.-5580008064 , Dipstick Tub Part No.-5580008066 , Valve Part No.-5580008078 , Sealkit Part No.-5580008080 , Sealkit Part No.-5580008081 , Exhaust Bend Part No.-5580008155 , Check Valve Part No.-5580008212 , Drivlina (7C Part No.-5580008228 , Dropbox Rplc Part No.-5580008250 , Protection Part No.-5580008307 , Timing Relay Part No.-5580008376 , Mount Part No.-5580008399 , Plate Part No.-5580008501 , Overcentre C Part No.-5580008505 , Cover Plate Part No.-5580008588 , Gasket Part No.-5580008672 , Key Board Part No.-5580008692 , Kylare Part No.-5580008703 , Pane - Right Part No.-5580008775 , Nipple Part No.-5580008916 , Upbox Part No.-5580008919 , Flange Conne Part No.-5580008964 , Pulley Part No.-5580009002 , Temp.Givare Part No.-5580009012 , Rem Part No.-5580009040 , Attachment Part No.-5580009087 , Shaft Part No.-5580009088 , Harness A20d Part No.-5580009250 , Harness Part No.-5580009264 , Tube Part No.-5580009276 , Dip Stick Part No.-5580009277 , Ror Part No.-5580009290 , Ror Part No.-5580009291 , Harness Part No.-5580009317 , Seal Kit Part No.-5580009391 , Seal Kit Part No.-5580009392 , Return Pipe Part No.-5580009436 , Check Valve Part No.-5580009695 , Link Arm Part No.-5580009719 , Radiator Part No.-5580009727 , Tube Part No.-5580009732 , Grease Pump Part No.-5580009759 , Actuator Part No.-5580010006 , Shim Part No.-5580010036 , Bearing Part No.-5580010037 , Seal Part No.-5580010039 , O-Ring Part No.-5580010040 , Lock Ring Part No.-5580010041 , Shims Part No.-5580010107 , Radiator Ass Part No.-5580010128 , Kylarror Part No.-5580010129 , Oil Cooler Part No.-5580010130 , Kylarror Part No.-5580010131 , Kylarror Part No.-5580010132 , Washer Part No.-5580010135 , Riktningsven Part No.-5580010168 , Bearing Kit Part No.-5580010176 , Regulator Part No.-5580010183 , Nozzle Part No.-5580010249 , Cover Panel Part No.-5580010252 , Relay Mount Part No.-5580010253 , Relay Mount Part No.-5580010254 , Holder Part No.-5580010260 , Motor Bracke Part No.-5580010281 , Cover Plate Part No.-5580010284 , Platskydd Part No.-5580010287 , Plc With Pro Part No.-5580010290 , Turbo Part No.-5580010292 , Hinge Part No.-5580010300 , Hinge Part No.-5580010301 , Platskydd Part No.-5580010309 , Platta Part No.-5580010312 , Repair Kit Part No.-5580010313 , Drive Belt Part No.-5580010333 , Plastic Pane Part No.-5580010347 , Extension Part No.-5580010397 , Link Part No.-5580010424 , Link Part No.-5580010425 , Brake Part No.-5580010433 , Dipstick Part No.-5580010441 , Plate Part No.-5580010469 , Mutter Part No.-5580010490 , Screw Part No.-5580010491 , Check Cartri Part No.-5580010496 , Seal Kit Part No.-5580010498 , Cable Complete Part No.-5580010503 , Check Valve Part No.-5580010578 , Solenoid Car Part No.-5580010579 , Coil Part No.-5580010580 , Spring Part No.-5580010652 , Tube Part No.-5580010661 , Tube Part No.-5580010662 , Lagerhallare Part No.-5580010697 , Tube Part No.-5580010720 , Gear Pump Part No.-5580010730 , Charge Valve Part No.-5580010750 , Cover Part No.-5580010759 , Cover, Stab Part No.-5580010771 , Tube Part No.-5580010772 , Attachment Part No.-5580010777 , Attachment Part No.-5580010781 , Inside Door Part No.-5580010830 , Hinge Mount Part No.-5580010831 , Cover Part No.-5580010863 , Kit Part No.-5580010883 , Seal Kit Part No.-5580010886 , Kit Part No.-5580010887 , Dip Stick Part No.-5580010918 , Siliconslang Part No.-5580011030 , Sensor Part No.-5580011074 , Friction Was Part No.-5580011080 , Sensor Part No.-5580011187 , Sensor Part No.-5580011189 , Sensor Part No.-5580011208 , Sensor Part No.-5580011210 , Bearing Part No.-5580011327 , Ring Part No.-5580011388 , Spacer Part No.-5580011394 , Seal Kit Part No.-5580011536 , Wiper Part No.-5580011541 , Wiper Part No.-5580011549 , Valve Set Part No.-5580011585 , Valve Set Part No.-5580011615 , Valve Set Part No.-5580011616 , Valve Set Part No.-5580011628 , Valve Set Part No.-5580011636 , Pump Part No.-5580011689 , Flash Light Part No.-5580011755 , Kit Part No.-5580011777 , Shaft Part No.-5580011786 , Distribution Part No.-5580011838 , Oil Line Part No.-5580011989 , Bearing Part No.-5580012090 , Screw Part No.-5580012121 , Cover Part No.-5580012122 , O-Ring Part No.-5580012127 , Cover Part No.-5580012210 , Grate Part No.-5580012220 , Seal Kit Part No.-5580012228 , Seal Kit Part No.-5580012231 , Driveline Part No.-5580012256 , Driveline Part No.-5580012257 , Tank Cover Part No.-5580012264 , Tank Cover Part No.-5580012265 , Plain Bearin Part No.-5580012283 , Set Screw Part No.-5580012294 , Seal Kit Part No.-5580012297 , Tube Bend Part No.-5580012374 , Sprocket Whe Part No.-5580012401 , Sprocket Whe Part No.-5580012408 , Sprocket Whe Part No.-5580012413 , Gear Hub Part No.-5580012470 , Grate Part No.-5580012499 , Tensioner Part No.-5580012546 , Sensor Part No.-5580012550 , Water Pump Part No.-6060010698 , Sensor Part No.-5580012554 , Vibr.Damper Part No.-5580012567 , Mount Part No.-5580012572 , Lock Ring Part No.-5580012654 , Lock Part No.-5580012656 , Switch-Selec Part No.-5580012662 , Collar Part No.-5580012739 , Seal Kit Part No.-5580012757 , Tube Inlet Part No.-5580012765 , Mount Accum Part No.-5580012812 , Seal Kit Part No.-5580012893 , Restriction Part No.-5580012894 , Valve Part No.-5580012895 , Thermostat Part No.-5580012911 , Turbo Part No.-5580012915 , Gasket Part No.-5580012916 , Pump Part No.-5580012924 , Cover Part No.-5580012943 , Driveline Part No.-5580012960 , Auxiliary Va Part No.-5580012961 , Retainer Part No.-5580012980 , Dip Stick Part No.-5580012982 , O-Ring Part No.-5580012995 , Sight Glass Part No.-5580013005 , Seal Kit Part No.-5580013024 , Seal Kit Part No.-5580013025 , Seal Kit Part No.-5580013026 , Valve Part No.-5580013027 , Bearing Pivo Part No.-5580013036 , Spacer Part No.-5580013047 , Filler Cap Part No.-5580013049 , Relay Box Part No.-5580013091 , Relay Box Part No.-5580013092 , Cable Complete Part No.-5580013156 , Cable Complete Part No.-5580013166 , Converter Part No.-5580013189 , Valve Part No.-5580013200 , Sealkit Part No.-5580013337 , Converter Part No.-5580013391 , Starter Part No.-5580013422 , Washer Part No.-5580013430 , Tube-Oil Fil Part No.-5580013480 , Cover Part No.-5580013493 , Sleeve Part No.-5580013500 , Dip Stick Part No.-5580013518 , Tube Part No.-5580013519 , Gasket Part No.-5580013520 , Step Assy. Part No.-5580013602 , Pressure Swi Part No.-5580013623 , Snap Ring Part No.-5580013643 , Tryckvakt Part No.-5580013722 , Tryckvakt Part No.-5580013723 , Gasket Part No.-5580013764 , Seal Part No.-5580013766 , Turbo Part No.-5580013773 , Water Pump Part No.-5580013774 , Oil Cooler Part No.-5580013778 , Gasket Part No.-5580013779 , O-Ring Part No.-5580013780 , Seal Part No.-5580013785 , Thermostat Part No.-5580013786 , Repair Kit S Part No.-5580013825 , Repair Kit P Part No.-5580013826 , Seal Kit Part No.-5580013859 , Seal Kit Part No.-5580013869 , Uppgradingk Part No.-5580013886 , Oil Cooler Part No.-5580013937 , General Shop Part No.-5580014021 , Plier Set Part No.-5580014051 , Set Of Hex & Part No.-5580014065 , Ratchet Hand Part No.-5580014069 , Sats Part No.-5580014071 , Pull Rod Set Part No.-5580014122 , Seal Kit Part No.-5580014125 , Seal Kit Part No.-5580014127 , Seal Kit Part No.-5580014133 , Main Relief Part No.-5580014134 , Pressure Val Part No.-5580014139 , Thermostat Part No.-5580014141 , Trunn. Block Part No.-5580014149 , Pin Part No.-5580014212 , Cover Plate Part No.-5580014214 , Pump Part No.-5580014238 , Seal Kit Part No.-5580014260 , Bucket Stop Part No.-5580014306 , Collar Part No.-5580014316 , Blade Part No.-5580014324 , Clutch Assy Part No.-5580014328 , Pull Rod Part No.-5580014514 , Washer Part No.-5580014528 , Cap-Kit Part No.-5580014539 , Wear Bar Part No.-5580014577 , Wear Bar Part No.-5580014578 , Sensor House Part No.-5580014608 , Kit-Maint 50 Part No.-5580014643 , Kit-Maint 10 Part No.-5580014644 , Spring Set Part No.-5580014773 , Seal Kit Part No.-5580014774 , Gas Valve Part No.-5580014818 , Cap Part No.-5580014819 , Remote Valve Part No.-5580014931 , Impact Socke Part No.-5580014936 , Spool Part No.-5580015042 , Bearing Part No.-5580015047 , Spring Set Part No.-5580015191 , Driveline Part No.-5580015261 , Seal Kit Part No.-5580015556 , Tube Part No.-5580015577 , Tube Part No.-5580015578 , Piston Rod Part No.-5580015644 , Cover Part No.-5580015645 , Piston Part No.-5580015646 , Turbo Part No.-5580015711 , Dip Stick Part No.-5580015714 , Pump Part No.-5580015727 , Screw Part No.-5580015728 , Cover Part No.-5580015729 , O-Ring Part No.-5580015730 , O-Ring Part No.-5580015731 , Valve Block Part No.-5580015839 , Valve Set Part No.-5580015896 , Check Valve Part No.-5580016137 , Spring Part No.-5580016263 , Spring Set Part No.-5580016300 , Seal Kit Part No.-5580016306 , Shock Absorb Part No.-5580016311 , Valve Part No.-5580016312 , Seal Kit Part No.-5580016313 , Bolt Set Part No.-5580016314 , Bearing Part No.-5580016365 , Seal Kit Part No.-5580016367 , Bearing Ball Part No.-5580016390 , Trunnion Cap Part No.-5580016528 , Guide Housin Part No.-5580016547 , Gasket Part No.-5580016640 , Tension Whee Part No.-5580016642 , Plug Part No.-5580016643 , Washer Part No.-5580016644 , Plug Part No.-5580016645 , Sensor Part No.-5580016647 , Sensor Part No.-5580016648 , Sensor Part No.-5580016649 , Sensor Part No.-5580016650 , Roller Part No.-5580016677 , Lock Ring Part No.-5580016678 , Seal Kit Part No.-5580016680 , Overhaul Kit Part No.-5580016681 , Output Shaft Part No.-5580016686 , Flange Part No.-5580016689 , Washer Part No.-5580016693 , Spacer Ring Part No.-5580016695 , Spacer Part No.-5580016718 , Seal Kit Part No.-5580016740 , Overhaul Kit Part No.-5580016741 , Yoke Part No.-5580016748 , Tube Part No.-5580016769 , Cotter Pin Part No.-5580016789 , Impeller Part No.-5580016792 , Bearing Part No.-5580016988 , Seal Kit Part No.-5580017023 , Seal Kit Part No.-5580017025 , Seal Kit Part No.-5580017088 , Shuttle Valv Part No.-5580017089 , Hose Part No.-5580017099 , Valve Comple Part No.-5580017418 , O-Ring Part No.-5580018510 , O-Ring Part No.-5580018511 , O-Ring Part No.-5580018512 , O-Ring Part No.-5580018513 , O-Ring Part No.-5580018514 , Spring Part No.-5580018515 , Seal Part No.-5580018522 , Seal Part No.-5580018526 , O-Ring Part No.-5580018528 , O-Ring Part No.-5580018529 , Electric Motor Part No.-5580018691 , Seal Kit Part No.-5580019354 , Shuttle Valve Part No.-5580019388 , Cylinder Part No.-5580020566 , Cable Part No.-5580020944 , Wiper Part No.-0665921400 , Seal Kit Part No.-5580021507 , Bushing Part No.-5580022820 , Nipple Part No.-5580023016 , Rim Compl. Part No.-5580023110 , Rim Complete Part No.-5580023112 , Washer Part No.-5580023147 , Bearing-Dli Part No.-5580023278 , Safety Devic Part No.-5580023534 , Fan Wheel Part No.-5580025311 , Field Kit Part No.-5580025535 , Pin Part No.-5580026831 , Seal Kit Part No.-5580026899 , Mount Part No.-5580027096 , Mount Part No.-5580027097 , Level Sensor Part No.-5580081812 , Shaft Part No.-5580101028 , Rim Compl. Part No.-5580101114 , Get Locking Part No.-5580101290 , Shroud Part No.-5580101318 , Shroud Part No.-5580101319 , Shroud Part No.-5580101320 , Shroud Part No.-5580101321 , Washer Part No.-5580102315 , Safety Devic Part No.-5580103031 , Gauge Cluster Part No.-5580103288 , Filter Part No.-5580108551 , Element Part No.-5580109441 , Valve Part No.-5580110382 , Expanding Sh Part No.-5589999200 , Expanding Sh Part No.-5589999201 , Expanding Sh Part No.-5589999202 , Expanding Sh Part No.-5589999203 , Expanding Sh Part No.-5589999204 , Expanding Bu Part No.-5589999700 , Expanding Bu Part No.-5589999701 , Expanding Bu Part No.-5589999702 , Rubber Washe Part No.-5590000054 , Shaft-Axle Part No.-5590000070 , Shaft-Axle Part No.-5590000071 , Knob Part No.-5590000093 , Switch Part No.-5590000094 , Motor Part No.-5590000099 , Housing Part No.-5590000115 , Wheel Part No.-5590000116 , Evaporator Part No.-5590000117 , Valve Part No.-5590000119 , Cover Part No.-5590000120 , Seal Part No.-5590000183 , Seal Part No.-5590000184 , Nut Part No.-5590000193 , Panel Inst Part No.-5590000206 , Drivers Chai Part No.-5590000288 , Ljuddampare Part No.-5590000331 , Exhaust Pipe Part No.-5590000332 , Hood Weldmen Part No.-5590000334 , Fender Part No.-5590000335 , Hinge Assemb Part No.-5590000339 , Driveline Part No.-5590000437 , Driveline Part No.-5590000438 , Drivlina Part No.-5590000439 , Silencer Mod Part No.-5590016228 , Rubbermouldi Part No.-5590000501 , Rubbermouldi Part No.-5590000502 , Rubbermouldi Part No.-5590000508 , Spacer Part No.-5590000509 , Mount Fan Pu Part No.-5590000512 , Mount Tensio Part No.-5590000517 , Lock Device Part No.-5590000583 , Fuel Gauge Part No.-5590000620 , Fan Part No.-5590000648 , Hose Engine Part No.-5590000659 , Hose Engine Part No.-5590000660 , Remskiva Part No.-5590000668 , Axel Part No.-5590000669 , Block Part No.-5590000677 , Block Part No.-5590000678 , Control Pane Part No.-5590000686 , Generator Part No.-5590000737 , Pto Part No.-5590000772 , Gasket Part No.-5590000792 , Mount Part No.-5590000797 , Ground Cable Part No.-5590000833 , Harness Part No.-5590000854 , Dump Cylinde Part No.-5590000870 , Cable Part No.-5590000900 , Attachment Part No.-5590000915 , Rim Part No.-5590000951 , Cone Part No.-5590000954 , Stopp Part No.-5590000987 , Gasket, Shim Part No.-5590001029 , Driveline Part No.-5590001073 , Converter Part No.-5590001087 , Belt Drive Part No.-5590001136 , Bearing Bush Part No.-5590001153 , Roller Beari Part No.-5590001156 , Oil Cooler Part No.-5590001163 , Oil Cooler Part No.-5590001164 , Roller Beari Part No.-5590001165 , Roller Beari Part No.-5590001169 , Sealring Part No.-5590001177 , Gasket Part No.-5590001181 , Gasket Part No.-5590001182 , Seal Part No.-5590001189 , Bleeder Valv Part No.-5590001194 , Spring Part No.-5590001195 , Spring Part No.-5590001196 , Guide Ring Part No.-5590001197 , Roller Beari Part No.-5590001209 , Ring Part No.-5590001210 , Nut Part No.-5590001211 , Sun Gear Part No.-5590001215 , Thrust Ring Part No.-5590001219 , Thrust Ring Part No.-5590001220 , Gear Part No.-5590001221 , Thrust Washe Part No.-5590001223 , Breather Part No.-5590001235 , Outer Disc Part No.-5590001242 , Housing Part No.-5590001247 , Housing Part No.-5590001248 , Gearring Part No.-5590001251 , Retainer Part No.-5590001253 , Pinion Part No.-5590001259 , Cover Part No.-5590001262 , Driveline Part No.-5590001285 , Brake Pedal Part No.-5590001438 , Cable Complete Part No.-5590001691 , Cable Complete Part No.-5590001692 , Cable Complete Part No.-5590001693 , Trunion Cap Part No.-5590001739 , Switch Part No.-5590001751 , Control Arm Part No.-5590001762 , Protection Hose Part No.-5590001808 , Protection Hose Part No.-5590001810 , Seal Fitting Part No.-5590001814 , Gland Part No.-5590001816 , Nut(Back Nut) Part No.-5590001817 , Manifold Part No.-5590001818 , Plate Part No.-5590001964 , Attachm. Cam Part No.-5590001967 , Disc Part No.-5590001971 , Wiper Motor Part No.-5590001992 , Tippcylinder Part No.-5590016694 , Lock Set Part No.-5590002093 , Hydraulic Mo Part No.-5590002097 , Hydraulic Pu Part No.-5590002109 , Brake Pedal Part No.-5590002111 , Rubber Hose Part No.-5590002113 , Spareparts S Part No.-5590002134 , Switch Panel Part No.-5590002142 , Fonsterlist Part No.-5590002147 , Grease Pump Part No.-5590002214 , Safety Valve Part No.-5590002358 , Mount Dropbo Part No.-5590002359 , Surge Tank Part No.-5590002364 , Shaft Part No.-5590002547 , Washer Part No.-5590002549 , Distance Part No.-5590002550 , Cover Part No.-5590002632 , Box Part No.-5590002636 , Cover Part No.-5590002638 , Shaft Mt42 Part No.-5590002787 , Silencer Part No.-5590002987 , Damper Assy Part No.-5590003145 , Washer Part No.-5590003213 , Tube Part No.-5590003288 , Defroster Part No.-5590003330 , Distance Pla Part No.-5590003358 , Attachment Part No.-5590003538 , Direction In Part No.-5590003586 , Shaft Part No.-5590003591 , Shaft Part No.-5590003592 , Wheel Stud Part No.-5590003594 , Piston Part No.-5590003621 , Gasket Part No.-5590003622 , Gasket Part No.-5590003623 , Brake Carrie Part No.-5590003624 , Oljesticka Part No.-5590003625 , Suction Pipe Part No.-5590003634 , Level Sensor Part No.-5590003638 , Face Seal Part No.-6060006499 , Housing Part No.-5590003750 , Piston Guide Part No.-5590003751 , Planetary Ca Part No.-5590003753 , Sun Gear Part No.-5590003754 , Sun Gear Part No.-5590003755 , Planet Gear Part No.-5590003757 , Planet Gear Part No.-5590003758 , Shaft Part No.-5590003765 , Gear Wheel Part No.-5590003766 , Roller Beari Part No.-5590003767 , Cover Part No.-5590003768 , Ring Gear Part No.-5590003772 , Oil Pump Part No.-5590003773 , Flange Part No.-5590003774 , Gear Wheel Part No.-5590003776 , Shaft Part No.-5590003777 , Shaft Part No.-5590003780 , Flange Part No.-5590003785 , Ring Gear Ca Part No.-5590003790 , Differential Part No.-5590003795 , Differential Part No.-5590003796 , Differential Part No.-5590003797 , Differential Part No.-5590003798 , Disk Part No.-5590003799 , Instrumentpa Part No.-5590003857 , Bearing Bush Part No.-5590003870 , Tapered Roll Part No.-5590003871 , Tapered Roll Part No.-5590003872 , Tapered Roll Part No.-5590003877 , Tapered Roll Part No.-5590003879 , Drive Flange Part No.-5590003880 , Extension Part No.-5590003884 , Gear Wheel Part No.-5590003886 , Flange Part No.-5590003896 , Gear Wheel Part No.-5590003897 , Shaft Part No.-5590003898 , Gear Wheel Part No.-5590003927 , Shaft Part No.-5590003928 , Shaft Part No.-5590003929 , Cover Part No.-5590003931 , Pol Wheel Part No.-5590003932 , Retainer Part No.-5590003936 , Oil Lever Ga Part No.-5590003938 , Exhaust Cove Part No.-5590003979 , Ring Part No.-5590004005 , Ring Part No.-5590004006 , Nut Part No.-5590004007 , Planetary Ca Part No.-5590004009 , Sun Gear Part No.-5590004010 , Planetary Ge Part No.-5590004011 , Thrust Washe Part No.-5590004012 , Planetary Pi Part No.-5590004015 , Planetary Pi Part No.-5590004016 , Ring Gear Ca Part No.-5590004017 , Mount Part No.-5590004079 , Bearing Reta Part No.-5590004149 , Dip Stick Part No.-5590004233 , Suction Pipe Part No.-5590004352 , Yoke Set Part No.-5590004365 , Turbo Part No.-5590004721 , Sensor Part No.-5590004723 , Oil Filter Part No.-6060008046 , Capscrew Part No.-5590004788 , Roller Beari Part No.-5590004795 , Snap Ring Part No.-5590004797 , Ring Part No.-5590004801 , Retaining Ri Part No.-5590004802 , Piston Ring Part No.-5590004803 , Piston Ring Part No.-5590004804 , Lock Washer Part No.-5590004805 , Gasket Part No.-5590004820 , Shaft,Expand Part No.-5590005001 , Expanding Bu Part No.-5590005002 , Washer, Expa Part No.-5590005003 , Spacer Part No.-5590005005 , Control Pane Part No.-5590005034 , Washer, Expa Part No.-5590005455 , Check Valve Part No.-5590005458 , Control Modu Part No.-5590005493 , Relief Valve Part No.-5590005522 , Valve-Cartri Part No.-5590005639 , Tie Plate Part No.-5590005662 , Distance Pla Part No.-5590005665 , Pilot Valve Part No.-5590005768 , Distance Pla Part No.-5590005872 , Stop Part No.-5590005889 , Mount Part No.-5590005910 , Bearing Part No.-5590005919 , Tube Part No.-5590006050 , Valve (By-Pa Part No.-5590006102 , Mount Part No.-5590006105 , Stop Part No.-5590006165 , Side Mirror Part No.-5590006292 , Attachment Part No.-5590006293 , Switch Box Part No.-5590006322 , Extension Pi Part No.-5590006378 , Insulator Part No.-5590006464 , Washer Part No.-5590006465 , Rain Protect Part No.-5590006566 , Tube Part No.-5590006601 , Temp. Gauge Part No.-5590006667 , Retaining Ri Part No.-5590006691 , Hub Part No.-5590006705 , Thermostat Part No.-5590006762 , Seal Kit Part No.-5590006763 , Harness Part No.-5590006792 , Harness Part No.-5590006793 , Retainer Part No.-5590006799 , Valve Block Part No.-5590006815 , Attachment Part No.-5590006856 , Pilot Valve Part No.-5590006863 , Breather Part No.-5590006881 , Attachment Part No.-5590006929 , Attachment Part No.-5590006944 , Hasness Part No.-5590006986 , Plc System Part No.-5590006987 , Spare Parts Part No.-5590006998 , Tube Shaft Part No.-5590007089 , Gasket Part No.-5590007207 , Protection Part No.-5590007285 , Valve Assy Part No.-5590007408 , Valve Assy Part No.-5590007409 , Valve Assy Part No.-5590007412 , Valve Assy Part No.-5590007416 , Valve Assy Part No.-5590007420 , Valve Assy Part No.-5590007421 , Valve Assy Part No.-5590007424 , Valve Assy Part No.-5590007425 , Valve Assy Part No.-5590007426 , Valve Assy Part No.-5590007427 , Gasket Part No.-5590007451 , Hub Part No.-5590007461 , Press.Rel.Va Part No.-5590007475 , Trunnion Cap Part No.-5590007509 , Wheel Hub Part No.-5590007521 , Outer Disk Part No.-5590007522 , Seal Part No.-5590007546 , Seal Part No.-5590007547 , Gear Pump Part No.-5590007550 , Dump Cylinde Part No.-5590007585 , Sealing Part No.-5590007607 , Mount Part No.-5590007632 , Cover Plate Part No.-5590007682 , Sealing Part No.-5590007695 , Ground Cable Part No.-5590007747 , Trunnion Blo Part No.-5590007792 , Hydraulic Pu Part No.-5590007959 , Lamp Attachment Part No.-5590007971 , Control Modu Part No.-5590007974 , Control Unit Part No.-5590007975 , Attachment Part No.-5590007981 , Raiser Filte Part No.-5590008093 , Panel Part No.-5590008103 , Guard Part No.-5590008119 , Protection Hose Part No.-5590008137 , Gauge-Fuel Part No.-5590008232 , Water Filter Part No.-5590008243 , Gasket Part No.-5590008244 , Tensioner Part No.-5590008248 , Sensor Part No.-5590008255 , Elect.Control Part No.-5590008256 , Sensor Part No.-5590008258 , Sensor Part No.-5590008259 , Cushion Part No.-5590008348 , Cushion Part No.-5590008349 , Hand Rail Part No.-5590008404 , Dip Stick Part No.-5590008443 , Dipstick Tub Part No.-5590008444 , Driveline Guard Part No.-5590008462 , Driveline Guard Part No.-5590008463 , Clamp Part No.-5590008464 , Angle Console Part No.-5590008469 , Wiper Blade Part No.-5590008483 , Plate Part No.-5590008503 , Heat Shield Part No.-5590008518 , Bulkhead Part No.-5590008607 , Roller Beari Part No.-5590008722 , Bearing Ball Part No.-5590008723 , Gasket Part No.-5590008743 , Seal Kit Part No.-5590008861 , Axle Spindle Part No.-5590008865 , Washer Part No.-5590008866 , Seal Kit Part No.-5590008915 , Radiator Part No.-5590008935 , Oil Cooler Part No.-5590008936 , Tube Part No.-5590008971 , Tube Part No.-5590008975 , Tube Part No.-5590008976 , Tube Part No.-5590008982 , Washer Part No.-5590008991 , Control Unit Part No.-5590009152 , Thermostat Part No.-5590009157 , Sensor Part No.-5590009191 , O-Ring Part No.-5590009192 , Attachment Part No.-5590009346 , Pin Part No.-5590009371 , Safety Device Part No.-5590009503 , Safety Device Part No.-5590009509 , Seal Kit Part No.-5590009510 , Rod Part No.-5590009528 , Solenoid Part No.-5590009754 , Valve Part No.-5590009755 , Plug Part No.-5590009756 , Plug Part No.-5590009758 , Valve Part No.-5590009759 , Lens Part No.-5590009815 , Holder Part No.-5590009817 , Lens Part No.-5590009818 , Block Part No.-5590009855 , O-Ring Part No.-5590009960 , O-Ring Part No.-5590009962 , O-Ring Part No.-5590009965 , Protection Hose Part No.-5590010026 , Fan Part No.-5590010155 , Spacer Part No.-5590010353 , Step Part No.-5590010441 , Elbow Part No.-5590010531 , Pipe Part No.-5590010533 , Cover Part No.-5590010564 , Step Part No.-5590010568 , Tube Part No.-5590010590 , Holder Part No.-5590010592 , Tube Part No.-5590010595 , Holder Part No.-5590010699 , Handle Assy Part No.-5590010702 , Mount Part No.-5590010848 , Mount Part No.-5590010851 , Mount Part No.-5590010921 , Hose Set Part No.-5590011012 , Stop Block Part No.-5590011021 , Pipe Part No.-5590011053 , Pipe Part No.-5590011062 , Pipe Part No.-5590011064 , Switch Panel Part No.-5590011070 , Switch Panel Part No.-5590011072 , Control Box Part No.-5590011161 , Converter Part No.-5590011167 , Axle Mount Part No.-5590011279 , Breather Filter Part No.-5590011330 , Filter Element Part No.-5590011541 , Breather Part No.-5590011556 , Gear Control Part No.-5590011885 , Pipe Clamp Part No.-5590011977 , Manometerholder Part No.-5590011990 , Tube Part No.-5590012130 , Surge Tank Part No.-5590012205 , Injector Part No.-5590012237 , Turbo Part No.-5590012239 , Fuel Pump Part No.-5590012240 , Radiator Part No.-5590012241 , After Cooler Part No.-5590012242 , Fan Guard Part No.-5590012243 , Fan Grid Part No.-5590012244 , Cover Part No.-5590012245 , Capscrew Part No.-5590012246 , Support Beam Part No.-5590012248 , Support Beam Part No.-5590012249 , Baffle Plate Part No.-5590012250 , Cooler Pipe Part No.-5590012251 , Cooler Pipe Part No.-5590012252 , Support Beam Part No.-5590012254 , Support Beam Part No.-5590012255 , Baffle Plate Part No.-5590012256 , Baffle Plate Part No.-5590012257 , Cooler Pipe Part No.-5590012258 , Pressure Switch Part No.-5590012294 , Piston Ring Part No.-5590012393 , Bushing Part No.-5590012785 , Service Kit Part No.-5590012881 , Stay Assy Part No.-5590013209 , Cable Complete Part No.-5590013364 , Silencer Part No.-5590013403 , Hydr.Oil Tank Part No.-5590013449 , Pump Part No.-5590013779 , Cylinder Part No.-5590014210 , Cylinder Kom Part No.-5590014226 , Cylinder Kom Part No.-5590014227 , Handle Rod Part No.-5590014470 , Plate Part No.-5590014474 , Sd-Supp. Device Part No.-5590014486 , Cover Part No.-5590014498 , Handle Part No.-5590015119 , Mount Part No.-5590015244 , Weldment Part No.-5590015699 , Block Part No.-5590015992 , Accumulat.Block Part No.-5590016286 , Manifold Part No.-5590016646 , El. Box Set Part No.-5590016653 , Light Inst Part No.-5590016659 , Hatch Part No.-5590016660 , Bracket Part No.-5590016678 , Junction Block Part No.-5590016720 , Junction Block Part No.-5590017106 , Driveline Part No.-5590017160 , Driveline Part No.-5590017161 , Driveline Part No.-5590017162 , Driveline Part No.-5590017163 , Driveline Part No.-5590017164 , Transm. Cool Part No.-5590017697 , Inlet Port Part No.-5590017953 , Washer Part No.-5590018177 , Solenoid Valve Part No.-5590018827 , Dip Stick Part No.-5590018911 , Shuttle Valve Part No.-5590019110 , Cable Set Part No.-5590020107 , Brake Light Part No.-5590024998 , Detector Wire Part No.-5590026041 , Checkfire Part No.-5590026043 , Axle Assy. Part No.-5599999956 , Valve Block Part No.-5724000699 , Rim Compl. Part No.-5728201653 , Screw, Hex Head Part No.-5730015192 , Valve, Relie Part No.-5750000487 , Aux. Contact Part No.-5750001581 , Aux. Contact Part No.-5750001582 , Belt,Flat Part No.-5750532708 , Screw,Countersunk Part No.-5750534623 , Planet Gear Part No.-6060001039 , Solenoid Valve Part No.-6060001266 , U-Joint Part No.-6060001268 , Shaft Seal Part No.-6060001269 , Seal Part No.-6060001328 , Carrier Part No.-6060001345 , Solenoid Val Part No.-6060001392 , Suspension Part No.-6060001665 , Piston Part No.-6060001938 , Seal Kit Part No.-6060002025 , Lever Set Part No.-6060002049 , Diff Assy Part No.-6060002091 , Pilot Valve Part No.-6060002167 , Guide Unit Part No.-6060002173 , Check Valve Part No.-6060002238 , Sensor Part No.-6060002342 , Seal Kit Part No.-6060002364 , Relief Valve Part No.-6060003002 , Switch Part No.-6060003136 , Heater Part No.-6060003137 , Shaft Part No.-6060003378 , Driver Part No.-6060003390 , Washer Part No.-6060003391 , Lock Nut Part No.-6060003393 , Support Bearing Part No.-6060003394 , Tension Wheel Part No.-6060003521 , O-Ring Part No.-6060003710 , O-Ring Part No.-6060003711 , Seal Kit Part No.-6060004082 , Pump Part No.-6060004090 , Oil Filter Part No.-6060004214 , Seal Ring Part No.-6060004258 , Switch Part No.-6060004262 , Cylinder Assy Part No.-6060004442 , Valve Part No.-6060004555 , Wheel Bolt Part No.-6060004880 , Stud Part No.-6060005252 , Different.Gear Part No.-6060005348 , Diff.Case Part No.-6060005349 , Flange Part No.-6060005352 , Seal Part No.-6060005600 , Sleeve Coupling Part No.-6060005606 , Disk Part No.-6060005726 , Seal Kit Part No.-6060006026 , Brake Disc Part No.-6060006386 , Friction Ring Part No.-6060006387 , Gear/Pinion Part No.-6060006491 , Diff.Kit Part No.-6060006575 , Filter Part No.-6060007784 , Filter Element Part No.-6060008040 , Filter Element Part No.-6060008044 , Kit Part No.-6060008772 , Disk Part No.-6060009346 , Friction Pla Part No.-6060009349 , Seal Kit Part No.-6060010898 , Seal Kit Part No.-6060010899 , Filt.Indicator Part No.-6060018550 , Coil Part No.-6060011658 , Lock Nut Part No.-6060013547 , Cover Part No.-6060013653 , Cover Part No.-6060013654 , Set,Seal Part No.-6060015161 , Valve,Contr,Direction,Pn Part No.-6060018793 , Set,Maintenance Part No.-6060140547 , Set,Maintenance Part No.-6060140548 , Cylinder Part No.-8113031112 , Press.Rel.Va Part No.-8113031144 , Compressor Part No.-8115430640 , Compressorbl Part No.-8115460019 , Compressor Part No.-8115470042 , Compressor Part No.-8115470596 , Compressor Part No.-8115901756 , Compressor Part No.-8115901806 , Ball Valve Part No.-8202030105 , Ball Valve Part No.-8202030204 , Ball Valve Part No.-8202030402 , Ball Valve Part No.-8202031103 , Ball Valve Part No.-8202031129 , Ball Valve Part No.-8202031137 , Ball Valve Part No.-8202031145 , Lubr.Valve Part No.-8202511401 , Valve Part No.-8204021078 , Valve Part No.-8204022225 , Solenoid Val Part No.-8204049897 , Shuttl.Valve Part No.-8204093010 , Check Valve Part No.-8204094034 , O-Ring Part No.-8231085345 , O-Ring Part No.-8231085346 , Breat.Filter Part No.-8231085419 , Manometer Part No.-8231085484 , Cover Compl. Part No.-8231085823 , Suct.Filter Part No.-8231108252 , Press. Switch Part No.-8231108575 , Protec.Cover Part No.-8231108609 , Pressure Fil Part No.-5580108475 , O-Ring Part No.-8231109094 , Cover Part No.-8231109095 , Solenoid Part No.-8231112751 , Valve Part No.-8231112787 , Pr.Rel.Valve Part No.-8231120035 , Check Valve Part No.-8231120286 , Piston Part No.-8231120291 , Overc.Valve Part No.-8231120307 , Valve Part No.-8231120363 , Seal Kit Part No.-8231120653 , Sealing Set Part No.-8231120679 , Sealing Set Part No.-8231120698 , Overc.Valve Part No.-8231120686 , Seal Kit Part No.-8231120689 , Seal Kit Part No.-8231120698 , Sealing Set Part No.-8231130590 , Overc.Valve Part No.-8231600386 , Overc.Valve Part No.-8231600387 , Hyd.Cylinder Part No.-8232110067 , Hydr. Cylinder Part No.-8232300135 , Hyd. Cylinde Part No.-8232300140 , G.Pr.Valve Part No.-8234020037 , Pr.Contr.Valve Part No.-8234020080 , Sequen.Valve Part No.-8234890588 , Pressure Switch Part No.-8440261053 , Conn.Plate Part No.-8440304138 , Plate Part No.-8915002014 , Prohibition Lab Part No.-8915002021 , Warnings Decal Part No.-8915002091 , Info Sign Part No.-8915002092 , Information Lab Part No.-8915002093 , Mandatory Actio Part No.-8915002141 , Information Lab Part No.-8915002152 , Mandatory Actio Part No.-8915002164 , Information Lab Part No.-8915002172 , Information Lab Part No.-8915002192 , Information Lab Part No.-8915002202 , Information Lab Part No.-8915002222 , Information Lab Part No.-8915002232 , Information Lab Part No.-8915002242 , Information Lab Part No.-8915002272 , Mandatory Actio Part No.-8915002303 , Prohibition Lab Part No.-8915002371 , Instructionsign Part No.-8915002413 , Mandatory Actio Part No.-8915002503 , Information Lab Part No.-8915002522 , Information Lab Part No.-8915002552 , Information Lab Part No.-8915002573 , Information Lab Part No.-8915002612 , Info Sign Part No.-8915002682 , Info Sign Part No.-8915002692 , Info Sign Part No.-8915002702 , Instructionsign Part No.-8915002713 , Instructionsign Part No.-8915002723 , Info Sign Part No.-8915002792 , Info Sign Part No.-8915002842 , Slangnippel Part No.-9000024600 , Claw Coupling Part No.-9000030200 , Slangnippel Part No.-9000032600 , Luftslang Part No.-9030010000 , Air Hose Part No.-9030030000 , Air Hose Part No.-9030040000 , Air Hose Part No.-9030050000 , Air Hose Part No.-9030060000 , Air Hose Part No.-9030070000 , Press.Gauge Part No.-9090023900 , Silencer Part No.-9090050700 , Silencer Part No.-9090050800 , Pressure Gauge Part No.-9090117200 , Connection Part No.-9090142300 , Manometer Part No.-9090165700 , Manometer Part No.-9090205200 , Assembly Set Part No.-9093007621 , Stay Part No.-9106000209 , Flange Part No.-9106001054 , Gasket Part No.-9106001057 , Hoods Complet Part No.-9106001084 , Roof Part No.-9106001090 , Roof Part No.-9106001094 , Rubber Cloth Part No.-9106001099 , Drivers Chair Part No.-9106001106 , Screw Part No.-9106001285 , Protection Roof Part No.-9106001320 , Washer Part No.-9106001411 , Shaft Part No.-9106001412 , Pin Part No.-9106001448 , Cover Part No.-9106001489 , Shaft Part No.-9106001541 , Stay Part No.-9106001549 , Exhaust Pipe Part No.-9106001552 , Exhaust Attm. Part No.-9106001553 , Outlet Part No.-9106001555 , Inlet Part No.-9106001556 , Door Part No.-9106001574 , Door Part No.-9106001575 , Rubber Cloth Part No.-9106001576 , Clamp Part No.-9106001749 , Lock Sheet Part No.-9106002052 , Rubber Cloth Part No.-9106002053 , Mudguard Part No.-9106002101 , Mudguard Part No.-9106002102 , Fuel Tank Part No.-9106002111 , Suct.-Return P. Part No.-9106002127 , Swing Arm Part No.-9106002130 , Fuel Hose Part No.-9106002139 , Fuel Hose Part No.-9106002140 , Fuel Hose Part No.-9106002141 , Grate Part No.-9106002143 , Rubber Cloth Part No.-9106002144 , Mudguard Part No.-9106002195 , Mudguard Part No.-9106002196 , Frame Compl. Part No.-9106002225 , Roller Part No.-9106002229 , Shaft Part No.-9106002230 , Plate Part No.-9106002233 , Plate Part No.-9106002234 , Plate Part No.-9106002244 , Rubber Cloth Part No.-9106002282 , Rubber Cloth Part No.-9106002285 , Rubber Cloth Part No.-9106002289 , Hatch Part No.-9106002291 , Hatch Part No.-9106002292 , Lock Part No.-9106002296 , Cover Part No.-9106002298 , Cylinder Part No.-9106003016 , Shaft Part No.-9106003040 , Valve Part No.-9106007556 , Floor Carpet Part No.-9106011127 , Compressor U Part No.-9106011172 , Floor Carpet Part No.-9106011184 , Cover Part No.-9106011251 , Cover Part No.-9106011252 , Cover Part No.-9106011255 , Cover Part No.-9106011256 , Cover Part No.-9106011257 , Gasket Part No.-9106011365 , Gasket Part No.-9106011366 , Gasket Part No.-9106011367 , Gasket Part No.-9106011368 , Swing Arm Co Part No.-9106011370 , Panel Plate Part No.-9106011397 , Waist Pin Part No.-9106011412 , Lamp Attachment Part No.-9106011471 , Battery Box Part No.-9106011523 , Clamp Part No.-9106011529 , Exhaust Hose Part No.-9106011557 , Glidbricka Part No.-9106011958 , Cover Part No.-9106011959 , Guard Holder Part No.-9106012071 , Valve Block Part No.-3217896820 , Double Ch.Valve Part No.-9106063010 , Check Valve Part No.-9106063011 , Overcent.Val Part No.-9106063012 , Over Cent.Va Part No.-9106063013 , Solenoid Valve Part No.-9106063014 , Cartridge Part No.-9106063123 , Seal Kit Part No.-9106063124 , Protect. Cap Part No.-9106064955 , Pr.Rel.Valve Part No.-9106065200 , Pr.Rel.Valve Part No.-9106065201 , Sealing Set Part No.-9106065203 , Suct.Connec. Part No.-9106065873 , Overcent. Va Part No.-9106066600 , Overcent.Val Part No.-9106066601 , Power Supply Part No.-9106071301 , Power Unit Part No.-9106071302 , Power Unit Part No.-9106071304 , Battery Charger Part No.-9106071305 , Suction Hose Part No.-9106077090 , Limit Switch Part No.-9106077102 , Hyd.Cylinder Part No.-9106077228 , L.Switch Kit Part No.-9106077417 , Lock Sheet Part No.-9106077424 , Attachment Part No.-9106077425 , Oil Cooler Part No.-9106077491 , Oil Cooler Part No.-9106077580 , Oil Cooler Part No.-9106077581 , Backventil Part No.-9106083301 , Check Valve Part No.-9106083301 , Hyd.Cylinder Part No.-9106087568 , Check Valve Part No.-9106090706 , Nozzle Part No.-9106090707 , Signal Cable Part No.-9106095302 , Signal Cable Part No.-9106095303 , Signal Cable Part No.-9106095701 , Funnel Part No.-9106101410 , Shaft Part No.-9106101411 , Gasket Part No.-9106101412 , Flap Part No.-9106101413 , House Part No.-9106101414 , Sleeve Part No.-9106101415 , Cap Nut Part No.-9106101416 , Pipe Connection Part No.-9106101419 , Hose Connection Part No.-9106101420 , Torque Key Part No.-9106101540 , Torque Key Part No.-9106101541 , Ir Thermomet Part No.-9106101542 , Protection Roof Part No.-9106106939 , Läs Instr.Bok Part No.-9106107100 , Läs Instr.Bok Part No.-9106107101 , No Admittance Part No.-9106107102 , No Admittance Part No.-9106107103 , Dekal Part No.-9106107106 , Vattenintag Part No.-9106107107 , Water Inlet Part No.-9106107108 , Svetsinstrukt. Part No.-9106107111 , Batterifr.Skilj Part No.-9106107112 , Dekal Part No.-9106107113 , Plc Cabinet Part No.-9106107114 , Bränsle Part No.-9106107115 , Engine Oil Part No.-9106107126 , Lubricating Oil Part No.-9106107127 , Engine Stop Part No.-9106107130 , Plate Part No.-9106107131 , Plate Part No.-9106107132 , Lubr. Oil Tank Part No.-9106107146 , Plate Part No.-9106107193 , Laser Radiation Part No.-9106107220 , Laser Radiation Part No.-9106107221 , Electric. Shock Part No.-9106107300 , Electric. Shock Part No.-9106107301 , Electric. Shock Part No.-9106107302 , Risk Of Crush. Part No.-9106107304 , Risk Of Crush. Part No.-9106107305 , High Sound Lev. Part No.-9106107306 , Tipping Haz. Tr Part No.-9106107309 , Tipping Haz. Dr Part No.-9106107311 , Falling Boom Part No.-9106107313 , Moving Parts Part No.-9106107314 , Moving Parts Part No.-9106107315 , Klämrisk Part No.-9106107316 , Fallande Bom Part No.-9106107317 , Tipp. Haz. Down Part No.-9106107321 , Tipping Haz. Dr Part No.-9106107326 , Laser Radiation Part No.-9106107426 , Laser Radiation Part No.-9106107427 , Insert Part No.-9106107771 , Collect. Block Part No.-9106107776 , Dir. Valve Part No.-9106107791 , Direktion Va Part No.-9106107795 , Samlingsbloc Part No.-9106107799 , Relief Cartr Part No.-9106107822 , Seal Kit Part No.-9106107831 , Valve Block Part No.-9106107832 , Valve Block Part No.-9106107840 , Seal Kit Part No.-9106107841 , Valve Part No.-9106107843 , Seal Kit Part No.-9106107844 , Housing Part No.-9106107908 , Motor Part No.-9106108005 , Pump Part No.-9106108006 , Repair Set Part No.-9106108007 , Repair Set Part No.-9106108012 , Electric Motor Part No.-9106108901 , El.Motor Part No.-9106108903 , El.Motor Part No.-9106109010 , El. Motor Part No.-9106109012 , El.Motor Part No.-9106109030 , Spir.Hose Co Part No.-9106110453 , Handle Part No.-9106112050 , Huvudbrytare Part No.-9106112500 , Brytare Part No.-9106112510 , Overload Relay Part No.-9106112511 , Protection Part No.-9106112512 , Block Part No.-9106112513 , Coil Part No.-9106112515 , Palm Grip Part No.-9106112516 , Contact Breaker Part No.-9106112520 , Trigger Part No.-9106112521 , Main Switch Part No.-9106112550 , Termiska Reläer Part No.-9106112942 , Contactor Part No.-9106115702 , Contactor Part No.-9106115705 , Contactor Part No.-9106115761 , Contactor Part No.-9106115762 , Assembly Set Part No.-9106116010 , Electr.Cabinet Part No.-9106116202 , Hasp Part No.-9106116500 , Hasp Part No.-9106116501 , Attachment Part No.-9106116502 , Shaft Part No.-9106116503 , Arm Part No.-9106116504 , Attachment Part No.-9106116505 , Attachment Part No.-9106116506 , Gasket Part No.-9106118977 , Gasket Part No.-9106118978 , Transformer Part No.-9106119452 , Frame Set Part No.-9106119466 , Strap Part No.-9106120861 , Shim Part No.-9106121509 , Spacer Part No.-9106121513 , Stop Lug Part No.-9106121514 , Sleeve Part No.-9106121515 , Electric Set Part No.-9106122362 , Connecting Pipe Part No.-9106126409 , Lamp Protection Part No.-9106127234 , Shaft Coupl. Part No.-9106127319 , Interm.Ring Part No.-9106127598 , Shaft Part No.-9106127959 , Compress.Spr Part No.-9106127964 , Control Part No.-9106127968 , Shaft Part No.-9106128511 , El. Cabinet Part No.-9106128631 , Cabinet Part No.-9106128640 , Door Part No.-9106128641 , Door Part No.-9106128642 , Beröringsskydd Part No.-9106128644 , List Part No.-9106128647 , Monteringsplåt Part No.-9106128663 , Monteringsplåt Part No.-9106128664 , Electr.Cabinet Part No.-9106128761 , Busbar Module Part No.-9106128840 , Electr.Cabinet Part No.-9106128961 , Protection R Part No.-9106129211 , Valve Block Part No.-9106129811 , Seal Kit Part No.-9106130507 , Solenoid Part No.-9106130509 , Cabinet Part No.-9106130901 , Cabinet Part No.-9106130902 , Cabinet Door Part No.-9106130903 , Cabinet Door Part No.-9106130904 , Cabinet Door Part No.-9106130905 , Electr.Cabinet Part No.-9106130912 , Reservdelssats Part No.-9106131200 , Main Relief Part No.-9106131301 , Seal Kit Part No.-9106131700 , Restr.Washer Part No.-9106131800 , Seal Kit Part No.-9106131900 , Address Plug Part No.-9106132430 , Termination Part No.-9106132438 , Main Cable Part No.-9106132446 , Signal Cable Part No.-9106132464 , Signal Cable Part No.-9106132465 , Signal Cable Part No.-9106132467 , Signal Cable Part No.-9106132486 , Address Plug Part No.-9106132490 , Hyd.Cyl Part No.-9106132502 , Shaft Part No.-9106132510 , Sealing Set Part No.-9106133100 , Repair Kit Part No.-9106133101 , Relief Valve Part No.-9106134102 , Collector Part No.-9106135106 , Key-Board Part No.-9106135463 , Key-Board Part No.-9106135466 , Plate Part No.-9106135468 , Cabel Lug Set Part No.-9106137115 , Wire Mesh Hose Part No.-9106137195 , Cover Part No.-9106141851 , Cover Part No.-9106141852 , Lever Part No.-9106142645 , Signal Cable Part No.-9106142671 , Plate Part No.-9106142741 , Dir.Valve Part No.-9106143720 , Water Pump S Part No.-9106143791 , Sprocket Whe Part No.-9106143803 , Attachment Part No.-9106143826 , Kit Part No.-9106143880 , Fan Set Part No.-9106144402 , Transformer Part No.-9106144448 , Cu-Rail Part No.-9106144666 , Signal Cable Part No.-9106144711 , Signal Cable Part No.-9106144721 , Cover Part No.-9106144740 , Pc-Card Empt Part No.-9106145203 , Can-Cable Part No.-9106147507 , Signal Cable Part No.-9106147516 , Signal Cable Part No.-9106147518 , Signal Cable Part No.-9106147547 , Signal Cable Part No.-9106147548 , Signal Cable Part No.-9106147563 , Sensor Cable Part No.-9106147583 , Sequence Val Part No.-9106149202 , Seal Kit Part No.-9106149204 , Seal Kit Part No.-9106149205 , Spare Part K Part No.-9106149323 , Bushing Part No.-9106149390 , Slide Bar Part No.-9106149394 , Clamp Part No.-9106149541 , Gangad Stang Part No.-9106149549 , Sensor Part No.-9106152428 , Sensor Part No.-9106152436 , Level Sensor Part No.-9106152446 , Seal Ring Part No.-9106153700 , Hose Reel Part No.-9106154090 , Sp.Parts Set Part No.-9106154831 , Sp.Parts Set Part No.-9106154832 , Service Kit Part No.-9106154833 , Termostat Part No.-9106157029 , Fish Joint Part No.-9106157987 , Signal Cable Part No.-9106159321 , Signal Cable Part No.-9106159323 , Signal Cable Part No.-9106159324 , Signal Cable Part No.-9106159390 , Signal Cable Part No.-9106159391 , Signal Cable Part No.-9106159661 , Valve Block Part No.-9106160722 , Check Valve Part No.-9106160727 , Sequence Val Part No.-9106160728 , Restriction Part No.-9106160729 , Valve Block Part No.-9106160730 , Overcentre C Part No.-9106160738 , Needle Valve Part No.-9106160739 , Double Check Part No.-9106160740 , Sequence Val Part No.-9106160741 , Seal Kit Part No.-9106160742 , Seal Kit Part No.-9106160743 , Seal Kit Part No.-9106160744 , Overcentre C Part No.-9106160778 , Valve Part No.-9106160787 , Solenoid Val Part No.-9106160798 , Valve Part No.-9106160799 , Press.Rel.Va Part No.-9106160898 , Seal Kit Part No.-9106161159 , Coupl. Housi Part No.-9106161217 , Flange Part No.-9106161218 , Riktningsven Part No.-9106161285 , Hydraulic Mo Part No.-9106161319 , Housing Part No.-9106161600 , Housing Part No.-9106161606 , Oil Cooler Part No.-9106161861 , Oil Cooler Part No.-9106161862 , Fuse Box Part No.-9106163616 , Signal Cable Part No.-9106163876 , Valve Block Part No.-9106165201 , Hydraulic Mo Part No.-9106165202 , Hydraulcylin Part No.-9106167474 , Main Cable Part No.-9106167794 , Sensor Cable Part No.-9106167795 , Signal Cable Part No.-9106250423 , Valve Block Part No.-9106168903 , Level Glass Part No.-9106169048 , Resolver Part No.-9106169609 , Rocker Part No.-9106169679 , Shaft Part No.-9106169993 , Shaft Part No.-9106170401 , Timing Belt Part No.-9106170403 , Cartridge Pi Part No.-9106170414 , Hyd.Motor Part No.-9106170418 , Cartridge Pi Part No.-9106170420 , Wheel Part No.-9106170424 , Wheel Part No.-9106170433 , Pulley Wheel Part No.-9106170440 , Sleeve Part No.-9106170521 , Switch Part No.-9106170538 , Signal Cable Part No.-9106170754 , Filler Pipe Part No.-9106171538 , Holder Part No.-9106171549 , Direction Va Part No.-9106172100 , Signal Cable Part No.-9106172501 , Signal Cable Part No.-9106172502 , Signal Cable Part No.-9106172504 , Signal Cable Part No.-9106172576 , Signal Cable Part No.-9106172591 , Valve Part No.-9106174300 , Overcent.Val Part No.-9106174638 , Load Holding Part No.-9106174656 , Valve Insert Part No.-9106174660 , Overcent.Val Part No.-9106174662 , Valve Block Part No.-9106174800 , Flange Part No.-9106175202 , Flange Part No.-9106175207 , Flange Part No.-9106175231 , Shaft Coupli Part No.-9106175534 , Flange Beari Part No.-9106175535 , Seal Retaine Part No.-9106175536 , Vibrator Part No.-9106175541 , Gasket Part No.-9106175549 , Roller Part No.-9106175574 , Valve Sectio Part No.-9106175700 , Valve Sectio Part No.-9106175701 , Shaft Part No.-9106176416 , Hyd.Cylinder Part No.-9106176424 , Hydr. Cylind Part No.-9106176435 , Hydr. Cylind Part No.-9106176437 , Hydr. Cylind Part No.-9106176438 , Hydr. Cylind Part No.-9106176439 , Shaft Part No.-9106176651 , Sensor Part No.-9106177511 , Temperature Part No.-9106177518 , Direction Va Part No.-9106178200 , Coupling Part No.-9106178408 , Damping Bush Part No.-9106178411 , Plate Part No.-9106178415 , Plate Part No.-9106178416 , Plate Part No.-9106178417 , Plate Part No.-9106178418 , Spacer Part No.-9106178419 , Spacer Part No.-9106178420 , Spacer Part No.-9106178423 , Spacer Part No.-9106178424 , Protection S Part No.-9106178427 , Damping Bush Part No.-9106178433 , Gripklo Part No.-9106178443 , Spacer Part No.-9106178446 , Turn.Device Part No.-9106178447 , Cylinder Part No.-9106178454 , Press.Releas Part No.-9106178716 , Holder Part No.-9106179220 , Expanding Sh Part No.-9106179409 , Expanding Sh Part No.-9106179446 , Expanding Sh Part No.-9106179465 , Bolt Part No.-9106179467 , Expanding Sh Part No.-9106179468 , Plain Bearin Part No.-9106179470 , Bolt Part No.-9106179471 , Expanding Sh Part No.-9106179472 , Link Arm Part No.-9106179481 , Link Arm Part No.-9106179482 , Expanding Sh Part No.-9106179484 , Exp.Shaft Part No.-9106179485 , Washer Part No.-9106179487 , Plain Bearin Part No.-9106179493 , Seal Kit Part No.-9106179541 , Bearing Kit Part No.-9106179569 , Valve Part No.-9106179582 , Bushing Part No.-9106179613 , Wedge Lock Part No.-9106179622 , Set Complete Part No.-9106180214 , Flange Part No.-9106180396 , Cover Plug Part No.-9106180477 , Cover Plug Part No.-9106180480 , Hydr. Cylind Part No.-9106180643 , Hydr. Cylind Part No.-9106180644 , Shaft Part No.-9106180646 , Shaft Part No.-9106180651 , Shaft Part No.-9106180652 , Locking Clip Part No.-9106180679 , Boom Panel Part No.-9106181103 , Overcent.Val Part No.-9106181322 , Bearing Part No.-9106181370 , Bearing Ring Part No.-9106181371 , Bearing Part No.-9106181372 , Pin Part No.-9106181374 , Washer Part No.-9106181375 , Pin Part No.-9106181377 , Bearing Bush Part No.-9106181381 , Bearing Bush Part No.-9106181390 , Bearing Bush Part No.-9106181395 , Pin Part No.-9106181397 , Pin Part No.-9106181398 , Pin Part No.-9106181399 , Slide Plate Part No.-9106181511 , Slide Plate Part No.-9106181512 , Pin Part No.-9106181514 , Pin Part No.-9106181516 , Bearing Bush Part No.-9106181517 , Lever Part No.-9106181518 , Distance Was Part No.-9106181519 , Stop Part No.-9106181522 , Stop Part No.-9106181523 , Stop Part No.-9106181530 , Glidplatta Part No.-9106181536 , Slideplate Part No.-9106181539 , Slide Plate Part No.-9106181542 , Stod Part No.-9106181544 , Washer Part No.-9106181545 , Cylinder Part No.-9106181547 , Guide Part No.-9106181548 , Support Part No.-9106181549 , Spring Part No.-9106181550 , Slide Plate Part No.-9106181552 , Slide Plate Part No.-9106181555 , Nut Part No.-9106181556 , Seal Kit Part No.-9106181560 , Cylinder Part No.-9106181563 , Bearing Bush Part No.-9106181578 , Rack Part No.-9106181582 , Piston Part No.-9106181584 , Piston Rod S Part No.-9106181585 , Washer Part No.-9106181590 , Tube Part No.-9106181592 , Glidplatta Part No.-9106181595 , Attachment Part No.-9106181629 , Locking Devi Part No.-9106181639 , Cover Female Part No.-9106181904 , Roller Part No.-9106182224 , Roller Part No.-9106182226 , Shaft Part No.-9106182235 , Guide Part No.-9106182237 , Flange Part No.-9106182242 , Hub Part No.-9106182243 , Flange Part No.-9106182295 , Hub Part No.-9106182297 , Attachment Part No.-9106182303 , Protection G Part No.-9106182312 , Rubber Prote Part No.-9106182388 , Piston Seal Part No.-9106182548 , Control Box Part No.-9106182564 , Termination Part No.-9106182834 , Power Supply Part No.-9106183709 , Signal Cable Part No.-9106183723 , Flow Meter Part No.-9106972172 , Signal Cable Part No.-9106183798 , Shaft Part No.-9106183936 , Sleeve Part No.-9106183996 , Hose Holder Part No.-9106184450 , Protect. Shi Part No.-9106184506 , Konsol Part No.-9106184585 , Fender Part No.-9106184655 , Valve Part No.-9106184716 , Shuttle Valv Part No.-9106184722 , Valve Part No.-9106184728 , Attachment Part No.-9106185051 , Spacer Sleev Part No.-9106185069 , Sleeve Part No.-9106185078 , Ladder Part No.-9106185130 , Sleeve Part No.-9106185219 , Spacer Sleev Part No.-9106185228 , Drive Unit Part No.-9106185254 , Bearing Plat Part No.-9106185283 , Bearing Plat Part No.-9106185284 , Bearing Plat Part No.-9106185285 , Spigot Part No.-9106185304 , Spacer Sleev Part No.-9106185315 , Sealing List Part No.-9106185343 , Bushing Part No.-9106185348 , Attachment Part No.-9106185412 , Axel Part No.-9106185414 , Cylinder Com Part No.-9106185442 , Scraper Part No.-9106185443 , Sleeve Part No.-9106185445 , Scraper Part No.-9106185449 , Drive Wheel Part No.-9106185466 , Driver Part No.-9106185474 , Spigot Part No.-9106185479 , Suction Hous Part No.-9106185482 , Hydraulic Cy Part No.-9106185484 , Hydraul Cyli Part No.-9106185486 , Shaft Part No.-9106185491 , Shaft Part No.-9106185492 , Hydraulic Mo Part No.-9106185561 , Swiwel Part No.-9106185564 , Temp. Sensor Part No.-9106185602 , Sensor Part No.-9106971859 , Flow Meter Part No.-9106185604 , Press.Transd Part No.-9106185606 , Rotation Uni Part No.-9106185616 , Scraper Blad Part No.-9106185619 , Sleeve Part No.-9106185634 , Seal Part No.-9106185640 , Valve Part No.-9106185645 , Scraper Blad Part No.-9106185647 , Plate Profil Part No.-9106185648 , Plate Profil Part No.-9106185649 , Seal Kit Part No.-9106185670 , Gear Wheel Part No.-9106185801 , Sleeve Part No.-9106185813 , Floor Carpet Part No.-9106186081 , Seal Kit Part No.-9106186449 , Bearing Set Part No.-9106186450 , Rcs3 Service Part No.-9106186701 , Protect. Shi Part No.-9106186938 , Protect. Shi Part No.-9106186939 , Support Part No.-9106186947 , Tube Part No.-9106186999 , Guide Strip Part No.-9106187504 , Piston Seal Part No.-9106187506 , Back Up Ring Part No.-9106187508 , Styrning Part No.-9106187512 , Kolv Part No.-9106187514 , Ring Part No.-9106187515 , Gavel Part No.-9106187516 , Sleeve Part No.-9106187523 , Seal Part No.-9106187525 , Shaft Part No.-9106187526 , Hydraulic Cy Part No.-9106187541 , Seal Kit Part No.-9106187547 , Wear Slide Part No.-9106187568 , Seal Part No.-9106187574 , Piston Part No.-9106187579 , Holder Part No.-9106187580 , House Part No.-9106187581 , House Part No.-9106187582 , Holder Part No.-9106187583 , Ring Part No.-9106187585 , Lock Ring Part No.-9106187586 , Intermed. Pa Part No.-9106187588 , Cylinder Part No.-9106187590 , Stopp Part No.-9106187593 , Ring Part No.-9106187596 , Switch Part No.-9106187614 , Sealing Part No.-9106187615 , Cylinder Part No.-9106187616 , Signal Cable Part No.-9106187916 , Signal Cable Part No.-9106187934 , Signal Cable Part No.-9106187937 , Signal Cable Part No.-9106187960 , Flow Meter Part No.-9106187961 , Piston Rod Part No.-9106188001 , Sealing Set Part No.-9106188008 , Compressor Part No.-9106188708 , Damping Elem Part No.-9106188709 , Gasket Part No.-9106188773 , Level Switch Part No.-9106188781 , Plate Part No.-9106188788 , Decoder Part No.-9106189016 , Decoder Part No.-9106189080 , Can-Open Cable Part No.-9106189824 , Signal Cable Part No.-9106189830 , Harness Part No.-9106189915 , Battery Charger Part No.-9106974874 , Sensor Part No.-9106190236 , Shaft Part No.-9106190656 , Hydr.Cylinde Part No.-9106190739 , Shaft Part No.-9106190744 , Shaft Part No.-9106190751 , Protection G Part No.-9106190780 , Spray Nozzle Part No.-9106190908 , Hydr. Cylind Part No.-9106190927 , Hydr. Cylind Part No.-9106190928 , Expanding Sh Part No.-9106190938 , Washer Part No.-9106190940 , Washer Part No.-9106190950 , Seal Kit Part No.-9106190953 , Rulle Part No.-9106191106 , Hose Feeder Part No.-9106191130 , Shaft Part No.-9106191135 , Tension Scre Part No.-9106191170 , Drive Roller Part No.-9106191173 , Stromfors.Sa Part No.-9106191866 , Display Patr Part No.-9106191922 , Lock Sheet Part No.-9106192174 , Sliding Piec Part No.-9106192211 , Sliding Piec Part No.-9106192212 , Seal Kit Part No.-9106192401 , Flange Beari Part No.-9106192459 , Attachment Part No.-9106192475 , Battery Support Part No.-9106193330 , I/O-Modul Part No.-9106193350 , Potentiomete Part No.-9106193365 , Shrinking Tub. Part No.-9106193455 , Dowel Part No.-9106193720 , Shaft Part No.-9106193831 , Pedal Part No.-9106194505 , Nipple Part No.-9106196000 , Hose Guide Part No.-9106202106 , Protection Part No.-9106202152 , Flange Part No.-9106202154 , Cylinder Part No.-9106202224 , Cylinder Part No.-9106202229 , Cylinder Part No.-9106202230 , Cylinder Part No.-9106202231 , Sequence Val Part No.-9106202234 , Motor Part No.-9106202255 , Seal Kit Part No.-9106202263 , Friction Pla Part No.-9106202270 , Friction Pla Part No.-9106202273 , Friction Pla Part No.-9106202274 , Seal Kit Part No.-9106202295 , Hydr. Cylind Part No.-9106202314 , Resolvermodu Part No.-9106972370 , Display Part No.-9106206556 , Fuse Box Part No.-9106206575 , Load Cell Part No.-9106206645 , Terminaton Part No.-9106206678 , Linear Senso Part No.-9106206698 , Plastic Shee Part No.-9106213642 , Silencer Part No.-9106215931 , Attachment Part No.-9106215947 , Exhaust Hose Part No.-9106215950 , Battery Charger Part No.-9106217350 , Cover Part No.-9106219007 , Guide Rail Part No.-9106219008 , Shaft Part No.-9106219011 , Pin Part No.-9106219016 , Roller Part No.-9106219017 , Attachment Part No.-9106219018 , Attachment Part No.-9106219019 , Hydr. Cylind Part No.-9106219022 , Attachment Part No.-9106219084 , Glare Shield Part No.-9106219086 , Remote Contr Part No.-9106219089 , Press. Switc Part No.-9106219201 , Press. Switc Part No.-9106219202 , Sensor Part No.-9106219215 , Sensor / Lin Part No.-9106219216 , Linear Senso Part No.-9106219217 , Kretskort Part No.-9106219602 , Kretskort Part No.-9106219603 , Level Sensor Part No.-9106219985 , Hoods Complet Part No.-9106220224 , Hoods Complet Part No.-9106220230 , Hatch Part No.-9106220276 , Rubber Cloth Part No.-9106220282 , Hatch Part No.-9106220283 , Kontaktdon Part No.-9106220634 , Cable Complete Part No.-9106220778 , Key Ring Part No.-9106220823 , Spring Set Part No.-9106221001 , Plate Part No.-9106221002 , Plate Part No.-9106221003 , Roller Set Part No.-9106221007 , Hose Guide Part No.-9106221008 , Clip Part No.-9106221009 , Plate Part No.-9106221011 , Washer Part No.-9106221013 , Plate Part No.-9106221016 , Plate Part No.-9106221017 , Motor Bracket Part No.-9106221020 , Drive Wheel Part No.-9106221022 , Link Screw Part No.-9106221034 , Attachment Part No.-9106221038 , Hose Coupling Part No.-9106221064 , Sleeve Part No.-9106221098 , Yoke Part No.-9106221100 , Guide Part No.-9106221106 , Guide Part No.-9106221107 , Cylinder Part No.-9106221108 , Guide Part No.-9106221113 , Piston Rod Part No.-9106221118 , Shaft Part No.-9106221122 , Drill Holder Part No.-9106221124 , Axle Assy. Part No.-9106221159 , Pin Part No.-9106221163 , Attachm. Plate Part No.-9106221205 , Hose Guide Part No.-9106221249 , Hydraulic Motor Part No.-9106221250 , Drive Wheel Part No.-9106221269 , Protection Part No.-9106221283 , Plate Part No.-9106221286 , Attachment Part No.-9106221288 , Attachment Part No.-9106221289 , Hose Guide Part No.-9106221290 , Modul Part No.-9106221436 , Signal Cable Part No.-9106221910 , Signal Cable Part No.-9106221911 , Signal Cable Part No.-9106221932 , Signal Cable Part No.-9106221962 , Cable Ladder Part No.-9106222807 , Cable Ladder Part No.-9106222809 , Rubber Gaske Part No.-9106222848 , Segment Part No.-9106223601 , Verktyg Part No.-9106224117 , Rcs4 Service Part No.-9106224180 , Handle Part No.-9106224270 , Flange Part No.-9106224489 , Cable Ladder Part No.-9106225108 , Level Sensor Part No.-9106229231 , Flat Bar Part No.-9106229700 , Plate Part No.-9106230758 , Level Sensor Part No.-9106152444 , Remote Contr Part No.-9106232452 , Shaft Comple Part No.-9106232500 , Bushing Part No.-9106232502 , Bushing Part No.-9106232503 , Nut Part No.-9106232504 , Washer Part No.-9106232506 , Attachment Part No.-9106233623 , Protection Part No.-9106234010 , Guide Tube Part No.-9106234803 , Hose Feeder Part No.-9106234852 , Stop Part No.-9106236100 , Damper Part No.-9106237556 , Control Box Part No.-9106240460 , Sequence Val Part No.-9106240601 , Protection B Part No.-9106241834 , Sensor Part No.-9106241901 , Level Sensor Part No.-9106241996 , Attachment Part No.-9106242036 , Lock Cover Part No.-9106242037 , Hydr. Cylind Part No.-9106242089 , Friction Pla Part No.-9106244270 , Hydr. Cylind Part No.-9106244275 , Bearing Set Part No.-9106246441 , Motor Bracket Part No.-9106320743 , Spacer Part No.-9106887045 , Cable Complete Part No.-9106970428 , Sensor Part No.-9106971864 , Decoder Modu Part No.-9106979770 , Electronic Unit Part No.-9106976288 , Attachment Part No.-9110350012 , Cover Part No.-9110350020 , Plate Part No.-9110350021 , Support Part No.-9110350030 , Attachment Part No.-9110350031 , Gas Spring Part No.-9110350039 , Protection Part No.-9110350041 , Shaft Lock Part No.-9110475600 , Attachment Part No.-9110673100 , Protection R Part No.-9110673501 , Shaft Part No.-9110675300 , Steering Part No.-9110743780 , Sealing Set Part No.-9110766505 , Filler Pump Part No.-9110766580 , Shaft Part No.-9110776200 , Bricka Part No.-9110806004 , Nippel Part No.-9110832400 , Nipple Part No.-9110832401 , Step Part No.-9110833600 , Shaft Part No.-9110854904 , Jack Part No.-9110855100 , End Piece Part No.-9110859502 , Attachment Part No.-9110861500 , Gauge Set Part No.-9110861510 , Gauge Set Part No.-9110861520 , Gauge Set Part No.-9110861530 , Floor Part No.-9110863003 , Hatch Part No.-9110877200 , Stringer Part No.-9110881801 , Rubber Protec Part No.-9110889230 , Gasket Part No.-9110892412 , Suct.Connect Part No.-9110892430 , Axelkoppling Part No.-9110894000 , Axelkoppling Part No.-9110894002 , Shaft Coupli Part No.-9110894004 , Lock Ring Part No.-9110895700 , Clutch Case Part No.-9110896900 , Clutch Case Part No.-9110896905 , Coupl.Set Part No.-9110896912 , Bricka Part No.-9110899900 , Ring Part No.-9110908029 , Filler Set Part No.-9110909602 , Sealing Flange Part No.-9110919806 , Thermostat Part No.-9110919980 , Stair Side Part No.-9110930817 , Pin Part No.-9110931600 , Spacer Ring Part No.-9110939000 , House Part No.-9110939100 , Spacer Tube Part No.-9110947166 , Coupl.Half Part No.-9110948401 , Valve Cone Part No.-9110948925 , Valve Seat Part No.-9110948927 , Cover Part No.-9110948956 , Holder Part No.-9110948974 , Attachment S Part No.-9110948999 , Spring Part No.-9110952410 , Spring Part No.-9110952417 , Piano Wire Part No.-9110952439 , Gasket Part No.-9110952443 , Rocker Part No.-9110952448 , Spacer Dia 2 Part No.-9110952449 , Hydralic Blo Part No.-9110953707 , Double Ch.Va Part No.-9110953712 , Press Red.Va Part No.-9110953716 , Press.Red Va Part No.-9110953717 , Dir. Valve Part No.-9110953719 , Seal Kit Part No.-9110953720 , Seal Kit Part No.-9110953721 , Seal Kit Part No.-9110953722 , Seal Kit Part No.-9110953724 , Locking Part No.-9110955500 , Catch Part No.-9110955502 , Compr Spring Part No.-9110955512 , Cable Steering Part No.-9110956000 , Clutch Case Part No.-9110967200 , Coupl. Housi Part No.-9110967202 , Hose Holder Part No.-9110974875 , Binder Box Part No.-9110976023 , Mellanlägg Part No.-9110984902 , Mellanlägg Part No.-9110984903 , Direction Va Part No.-9110989507 , Signal Cable Part No.-9110996868 , Main Cable Part No.-9110996875 , Can-Cable Part No.-9110998421 , Signal Cable Part No.-9110998442 , Attachment Part No.-9110998650 , Flashing Beacon Part No.-9110999464 , Valve Part No.-9110999624 , Valve Part No.-9110999643 , Check Valve Part No.-9110999664 , Seal Set Part No.-9110999684 , Seal Set Part No.-9110999685 , Seal Set Part No.-9110999688 , Seal Set Part No.-9110999690 , Cartridge Part No.-9110999693 , Coil Part No.-9110999694 , Cable Gear Part No.-9111002030 , Kabeldon Part No.-9111002033 , Shaft Lock Part No.-9111078300 , Shaft Part No.-9111192200 , Shaft Part No.-9111192300 , Support Part No.-9111250200 , Cover Part No.-9111250701 , Water Pump Part No.-9111269900 , Sealing Set Part No.-9111269901 , Sealing Set Part No.-9111269902 , Sealing Set Part No.-9111269903 , Sleeve Part No.-9111269923 , Slide Part No.-9111269938 , Extender Part No.-9111282610 , Spacer Tube Part No.-9111308357 , Shaft Part No.-9111323107 , Hydr.Kit Part No.-9111346900 , Attachment Part No.-9111353014 , Hose Holder Part No.-9111362245 , Interm.Plate Part No.-9111367431 , Control Pane Part No.-9111370308 , Plate Part No.-9111370348 , Poten.Meter Part No.-9111370350 , Housing Part No.-9111370720 , Cover Part No.-9111370730 , Cover Part No.-9111370732 , Bushing Part No.-9111370750 , Attachment Part No.-9111371435 , Relä Part No.-9111373410 , Relay Part No.-9111373411 , Tran.Protec. Part No.-9111373430 , Transient Prot. Part No.-9111373431 , Trans.Prot Part No.-9111373432 , Transient Prot. Part No.-9111373435 , Shaft Part No.-9111374407 , Cart Complet Part No.-9111374800 , Wheel,Compl. Part No.-9111374830 , Check Valve Part No.-9111375100 , Check Valve Part No.-9111375101 , Potent.Meter Part No.-9111375600 , Gasket Part No.-9111376021 , End Support Part No.-9111376702 , End Plate Part No.-9111376703 , Earth Thermi Part No.-9111376709 , Plinth Part No.-9111376744 , Flow Regul. Part No.-9111377001 , Pr.Rel.Valve Part No.-9111377002 , Check Valve Part No.-9111377003 , Pr.Regulator Part No.-9111377004 , Sealing Set Part No.-9111377011 , Check Valve Part No.-9111382103 , Direct.Valve Part No.-9111384700 , Swivel Part No.-9111385400 , Cable,12-Core Part No.-9111389109 , Cable, 5-Core Part No.-9111389110 , Cable, 7-Core Part No.-9111389113 , Cable,25-Core Part No.-9111389119 , Cable, 3-Core Part No.-9111389143 , Cable, 2-Core Part No.-9111389159 , Cable, 1-Core Part No.-9111389180 , Cable, 1-Core Part No.-9111389187 , Cable, 2-Core Part No.-9111389199 , Cable, 5-Core Part No.-9111389264 , Repair Set Part No.-9111393100 , Shaft Coupli Part No.-9111394000 , Shaft Coupli Part No.-9111394008 , Kuggkrans Part No.-9111394011 , Hose Fender Part No.-9111394740 , Water Pump Part No.-9111394920 , Roller Path Part No.-9111399820 , Shaft Part No.-9111400913 , Shaft Part No.-9111401034 , Flat Iron Part No.-9111401720 , Plate Part No.-9111401740 , Attachment Part No.-9111401793 , Turning Device Part No.-9111401802 , Hydr.Cylinde Part No.-9111401960 , Cylinder Part No.-9111401961 , Shaft Part No.-9111401967 , Shaft Part No.-9111401968 , Shaft Part No.-9111401970 , Shaft Part No.-9111401971 , Shaft Part No.-9111401972 , Shaft Part No.-9111401973 , Spacer Part No.-9111401974 , Shaft Part No.-9111401984 , Attachment Part No.-9111402002 , Seal Part No.-9111402003 , Attachment Part No.-9111402004 , Hyd. Cylinde Part No.-9111402044 , Protection Part No.-9111402080 , Protection Part No.-9111402081 , Cart Complet Part No.-9111403250 , Attachment Part No.-9111404122 , Hydr. Cylind Part No.-9111404192 , Hydr. Cylind Part No.-9111404198 , Shaft Part No.-9111404826 , Shaft Part No.-9111404827 , Gasket Part No.-9111404852 , Gasket Part No.-9111404853 , Attachment Part No.-9111404926 , Control Arm Part No.-9111404929 , Control Devi Part No.-9111404930 , Bushing Part No.-9111404937 , Drain Unit Part No.-9111404991 , Seal Kit Part No.-9111404992 , Spacer Part No.-9111405802 , Hydr. Cylind Part No.-9111406131 , Hydr. Cylind Part No.-9111406133 , Strainer Part No.-9111406174 , Strainer Part No.-9111406178 , Strainer Part No.-9111406179 , Spare Parts Set Part No.-9111406193 , Spare Parts Set Part No.-9111406194 , Protection Part No.-9111406229 , Protection P Part No.-9111406359 , Protection Part No.-9111406801 , Valve Set Part No.-9111406830 , Valve Set Part No.-9111406831 , Spare Parts Part No.-9111406832 , Check Valve Part No.-9111408530 , Cover Part No.-9111408810 , Sealing List Part No.-9111408830 , Link Arm Part No.-9111408850 , Pipe Couplin Part No.-9111409516 , Shaft Part No.-9111409517 , Front Part No.-9111410420 , Guide Part No.-9111410422 , Seal Kit Part No.-9111410500 , Oil Filter S Part No.-9111410956 , End Piece Part No.-9111411528 , Protection Part No.-9111412812 , Protecter Part No.-9111413100 , Cap Part No.-9111413101 , Seal Part No.-9111413109 , Hydraulic Pi Part No.-9111414433 , Hydraulic Pi Part No.-9111414435 , Hydraulic Pi Part No.-9111414437 , Hydraulic Pi Part No.-9111414439 , Hydraulic Pi Part No.-9111414441 , Hydraulic Pi Part No.-9111414443 , Hydraulic Pi Part No.-9111414447 , Hydraulic Pi Part No.-9111414449 , Hydraulic Pi Part No.-9111414451 , Hydraulic Pi Part No.-9111414453 , Hydraulic Pi Part No.-9111414455 , Hydraulic Pi Part No.-9111414457 , Hydraulic Pi Part No.-9111414459 , Hydraulic Pi Part No.-9111414461 , Hydraulic Pi Part No.-9111414463 , Hydraulic Pi Part No.-9111414465 , Hydraulic Pi Part No.-9111414467 , Hydraulic Pi Part No.-9111414469 , Shut Off Vav Part No.-9111414509 , Plastic Sheet Part No.-9111416971 , Stinger Part No.-9111432612 , Swivel Part No.-9111500165 , Press.Rel.Va Part No.-9120029202 , Press.Rel.Va Part No.-9120029203 , Press.Rel.Va Part No.-9120029206 , Press.Rel.Va Part No.-9120029260 , Pr.Rel.Valve Part No.-9120029263 , Relief Cartr Part No.-9120029908 , Valve Part No.-9120029917 , Lever Set Part No.-9120059052 , Control Lever Part No.-9120059053 , Setting Screw Part No.-9120069051 , Seal Kit Part No.-9120079007 , Plunger P.Set Part No.-9120079008 , Lever Joint Part No.-9120079013 , Dragstångssats Part No.-9120079021 , Pr.Rel.Valve Part No.-9120079065 , Lever Joint Part No.-9120089302 , Tie Rod Kit Part No.-9120089304 , Lever Guide Part No.-9120089307 , Mounting Plate Part No.-9120089308 , Plug Set Part No.-9120089328 , Lever Set Part No.-9120089363 , Lever Set Part No.-9120089367 , Bolt Set Part No.-9120089391 , Bolt Set Part No.-9120089392 , Lever Part No.-9120089513 , Pawl Set Part No.-9120089614 , Spare Parts Part No.-9120089667 , Repair Set Part No.-9120092001 , Spring Set Part No.-9120092015 , Cover Part No.-9120092016 , Cover Part No.-9120092018 , Valve Part No.-9120092030 , Sealing Set Part No.-9120092036 , Sealing Set Part No.-9120092038 , Valve Sect. Part No.-9120092041 , Seal Kit Part No.-9120092315 , Valve Part No.-9120092353 , Seal Kit Part No.-9120092355 , Tie Rod Kit Part No.-9120092562 , Sealing Set Part No.-9120099005 , Sealing Set Part No.-9120099006 , Sealing Set Part No.-9120099007 , Seal Kit Part No.-9120099008 , Packningssats Part No.-9120099009 , Seal Kit Part No.-9120099010 , Sealing Set Part No.-9120099011 , Sealing Set Part No.-9120099012 , Packningssats Part No.-9120099014 , Sealing Set Part No.-9120099018 , Repair Kit Part No.-9120099020 , Sealing Set Part No.-9120099301 , Seal Kit Part No.-9120099302 , Seal Kit Part No.-9120099303 , Seal Kit Part No.-9120099304 , Sealing Set Part No.-9120099305 , Seal Kit Part No.-9120099306 , Sealing Set Part No.-9120099308 , Seal Kit Part No.-9120099309 , Sealing Set Part No.-9120099310 , Sealing Set Part No.-9120099312 , Sealing Set Part No.-9120099313 , Seal Kit Part No.-9120099314 , Seal Kit Part No.-9120099316 , Seal Kit Part No.-9120099401 , Sealing Set Part No.-9120099612 , Pr.Rel.Valve Part No.-9120099964 , Anslutn.Nippel Part No.-9121550008 , Sealing Set Part No.-9121571950 , Hyd.Cylinder Part No.-9121591301 , Hyd.Cylinder Part No.-9121591302 , Hydr. Cylind Part No.-9121591305 , Hydr. Cylind Part No.-9121591306 , Hyd.Cylinder Part No.-9121598701 , Hyd.Cylinder Part No.-9121598702 , Sealing Set Part No.-9121598750 , Hyd.Cylinder Part No.-3128259843 , Hydr. Cylinder Part No.-3128321900 , Packningssats Part No.-9121667550 , Sealing Set Part No.-9121667650 , Sealing Set Part No.-9121667750 , Seal Kit Part No.-9121669650 , Sealing Set Part No.-9121685550 , Sealing Set Part No.-9121686050 , Hyd.Cylinder Part No.-9121687201 , Seal Kit Part No.-9121687250 , Hyd.Cylinder Part No.-9121701702 , Seal Kit Part No.-9121701750 , Hyd.Cylinder Part No.-9121701800 , Hyd.Cylinder Part No.-9121703200 , Hyd.Cylinder Part No.-9121703203 , Seal Kit Part No.-9121703204 , Accumulator Part No.-9121703207 , Sealing Part No.-9121703208 , Bushing Part No.-9121703210 , Hyd.Cylinder Part No.-9121704502 , Seal Kit Part No.-9121704550 , Hyd.Cylinder Part No.-9121709302 , Hydr. Cylind Part No.-9121709304 , Hyd.Cylinder Part No.-9121722101 , Sealing Set Part No.-9121730050 , Hand Lever Part No.-9122178015 , Cover Part No.-9122307300 , Sealing Set Part No.-9122351750 , Pist.Rod Eye Part No.-9122363800 , End Cover Part No.-9122365300 , Piston Rod Part No.-9122375000 , Sealing Set Part No.-9122376450 , Cover Part No.-9122383800 , Sealing Set Part No.-9122387750 , Cover Compl. Part No.-9122433250 , Valve Part No.-9122435200 , Hyd.Cylinder Part No.-3128325774 , Sealing Set Part No.-9122438650 , Cover Part No.-9122488000 , Hyd.Cylinder Part No.-9122503800 , Sealing Set Part No.-9122503850 , Sealing Set Part No.-9122551950 , Cover Part No.-9123355200 , Cylinder Cover Part No.-9123355300 , Cover Part No.-9123355400 , Cover Part No.-9123355600 , Cover Part No.-9123355800 , Cover Compl. Part No.-9123650705 , Cover Part No.-9123650711 , Cylinder Cover Part No.-9123650713 , Kolvstång Part No.-9123662400 , Cover Part No.-9123760300 , Rubber Hood Part No.-9123914900 , Knob Part No.-9124254501 , Plate Part No.-9124808100 , Bushing Part No.-9124880800 , Bushing Part No.-9124881000 , Piston Part No.-9124945600 , Bushing Part No.-9124950700 , Piston Part No.-9124956400 , Kolv Part No.-9124956500 , Piston Part No.-9124956600 , Kolv Part No.-9124956700 , Kolv Part No.-9124956800 , Bälg Part No.-9124974600 , O-Ring Part No.-9125605900 , O-Ring Part No.-9125618500 , O-Ring Part No.-9125618600 , O-Ring Part No.-9125619100 , Seal Part No.-9125630000 , Seal Washer Part No.-9125630300 , Seal Washer Part No.-9125664800 , Piston Seal Part No.-9125673900 , O-Ring Part No.-9125687100 , Set Screw Part No.-9125689600 , Set Screw Part No.-9125728900 , Set Screw Part No.-9125729500 , Ball Knob Part No.-0362111000 , Ball Joint Part No.-0501001600 , Lock Ring Part No.-9125960100 , Cable Part No.-9125995700 , Hyd.Cylinder Part No.-9126158000 , Kolvstångsöra Part No.-9126176600 , Pisto Rod Part No.-9126181203 , Fjädersats Part No.-9126181619 , Cover Part No.-9126195600 , Piston Part No.-9126195900 , Kolvstång Part No.-9126201001 , Cover Part No.-9126201100 , Kolv Part No.-9126201200 , Hyd.Cylinder Part No.-9126232200 , Piston Rod Part No.-9126249601 , Cover, Compl Part No.-9126277050 , Piston Rod Part No.-9126277101 , Piston Rod Part No.-9126332602 , Piston Part No.-9126332700 , Kolvstång Part No.-9126333000 , Piston Rod Part No.-9126384000 , Cover Part No.-9126394300 , Cover Part No.-9126394400 , Piston Part No.-9126394800 , Cover Part No.-9126395100 , Cover Part No.-9126395900 , Cover Part No.-9126396000 , Cover Part No.-9126396500 , Cover Part No.-9126424400 , Piston Part No.-9126429300 , Piston Part No.-9126429500 , Piston Rod Part No.-9126430003 , Cover Part No.-9126430200 , Cover Part No.-9126430300 , Pipe Part No.-9126449202 , Cone Part No.-9126457701 , Cone Part No.-9126457702 , Cone Part No.-9126457703 , Cone Part No.-9126457704 , Pipe Part No.-9126461002 , Pipe Part No.-9126461008 , Pipe Part No.-9126461009 , Back-Up Ring Part No.-9126602000 , Cable Clamp Part No.-9126706200 , Sealing Set Part No.-9126900691 , Ring Part No.-9127187200 , Fjäder Part No.-9127215400 , Pipe Part No.-9127229801 , Pipe Part No.-9127229901 , Hålskruv Part No.-9127230000 , Plainbearing Part No.-9127252300 , Plug Part No.-9127319933 , Washer Part No.-9127354770 , Piston Part No.-9128612500 , Press. Plate Part No.-9128696200 , Slid Part No.-9128699800 , Kolv Part No.-9128707600 , Bushing Part No.-9128734200 , Bushing Part No.-9128734300 , Bushing Part No.-9128734400 , Bearing Bushing Part No.-9128734600 , Cone Part No.-9128814900 , Spring Part No.-9128945200 , End Socket Part No.-9139600221 , End Socket Part No.-9139600223 , Flat Pin Sleeve Part No.-9139600456 , Coll.Block Part No.-9236010336 , Solen.Valve Part No.-9236050981 , Hyd.Cylinder Part No.-9236200262 , Shim Part No.-9236200269 , Spacer Part No.-9236200313 , Lock Nut Part No.-9236200315 , Shaft Part No.-9236200320 , Washer Part No.-9236200324 , Supp.Washer Part No.-9236200325 , Bushing Part No.-9236200327 , Sealing Set Part No.-9236200386 , Spacer Ring Part No.-9236200398 , Pist.Rod End Part No.-9236200933 , Pist.Rod End Part No.-9236200934 , Piston Part No.-9236201029 , Cover Part No.-9236201221 , Spindel/Spin Part No.-9236201243 , Sealing Bush Part No.-9236201248 , Valve Part No.-9236201257 , Sealing Set Part No.-9236201628 , Washer Part No.-9236201762 , Sealing Set Part No.-9236201764 , Spacer Part No.-9236202238 , Brake Part No.-9236202242 , Cradle Part No.-9236202732 , Support Plat Part No.-9236202742 , Guide Part No.-9236204528 , Bushing Part No.-9236204736 , Attachment Part No.-9236207528 , Turning Devi Part No.-9495591680 , Mandrel Part No.-9495591700 , Mandrel Part No.-9495591800 , Mandrel Part No.-9495591900 , Mandrel Part No.-9495592000 , Mandrel Part No.-9495592100
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
31.
Power #10547038 Price Bid
Supply Of Spares For Blower Model Ugrk 220 Make Usha , Pressing Bush A & B Of Ugrk 220 , Tensioning Element -Ugrk 220 , Distance Bush -Ugrk 220 , Distance Ring -Ugrk 220 , Gasket Packing -Ugrk 220 , Withdrawal Sleeve -Ugrk 220 , O – Ring -Ugrk 220 , Oil Seal,Ugrk 220 , Piston Rings -Ugrk 220 , Oil Level Sight Glass -Ugrk 220 , Splash Guard -Ugrk 220 , Lock Nut -Ugrk 220 , Lock Washer -Ugrk 220 , 1. Upper Gear Wheel – I -Ugrk 220 , 2. Lower Gear Wheel – Ii -Ugrk 220 , Oil Drain Plug -Ugrk 220 , Bare Shaft Machine Assembly Ugrk 220 , Suction Air Filter Primary Ugrk-220 , Suction Air Filter Secondary Ugrk-220 , Upper Rotor 1,Model:Ugrk 220,Usha Comp , Upper Rotor 2,Model:Ugrk 220,Usha Comp , Dowel Pin,Outer Cover,Ugrk 220,Usha Comp , V Pully,Machine,Pn:11,Ugrk 220,Usha Comp , V Pully,Motor,Pn:12,Ugrk 220,Usha Comp , Non Return Vlv,Pn:07,Ugrk 220,Usha Comp , Safety Valve,Pn:06,Ugrk 220,Usha Comp , Air Breather Filter,Mn:Ugrk 220,Usha , Anti Vibration Pads,Pn:17,Ugrk 220,Usha , Injection Ring-All,Pn-10,M:Ugrk 220,Usha , Injection Ring-A&B,Pn-11,M:Ugrk 220,Usha , Pressing Ring,Pn-25,M.Ugrk 220,Usha Comp , Intermediate Ring,Pn-28,M.Ugrk 220,Usha
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Private Organizations No of Bidders 1
Madhya Pradesh View Result →
32.
Health and Family Welfare #10546188 Price Bid
Ct Scanner 16 Slice With Flat Table Top Couch(Ct Simulator) Ct Scanner 16 Slice With Flat Table Top Couch(Ct Simulator) , Ct Scanner 16 Slice With Flat Table Top Couch As Per The Specification Except The Following , Additional Work Station , Dry Imager , Pressure Injector With Syringes , Full System Ups , Lead Glass , Light Weight Vinyl Lead Apron With Thyroid Shield , Gonad Shield , Music And Patient Address System With Speakers , 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , 15.12.1 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , 15.12.2Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead: Of Area Beyond 3 Sq. Metre , 15.23.1Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , 15.57 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge , 2.34.1Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% , 2.35.1.1Diluting And Injecting Chemical Emulsion For Post -Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion):Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Litres / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300Mm Including Excavation Channel Along The Wall & Rodding Etc. Complete: With Chlorpyriphos /Lindane E.C. 20% With 1% Concentration , 24.2Providing And Fixing Double Scaffolding System (Cup Lock Type ) On The Exterior Side Of Building/Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40 Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Chakkus, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: - ( 1) The Evaluational Area Of The Scaffolding Shall Be Measured For Payment Purpose, (2) The Payment Will Be Made Once Only For Execution Of All Items Of Such Works. , 15.60 Disposal Of Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved , 50.2.25.1 Filling With Contractors Own Earth ( Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M As Per Direction Of Site Engineer-In-Charge , 50.4.1.1 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size) Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing For Leveling Coarse Of Floor And Roof Etc. , 50.5.5Reinforced Cement Concrete Work In Arches, Archribs, Domes, Vaults, Shells, Folded Plate And Roof Having Slope More Than 15 Degree Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size). , 50.5.33.2 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Above Plinth Level Upto Floor V Level , 5.22.1 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelmild Steel And Medium Tensile Steel Bars , 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platform , 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil , 6.26.2Brick Work With Common Burnt Clay Selected F.P.S (Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand)Above Plinth Level And Upto Floor V Level , 50.6.1.2Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. , 50.6.1.8 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In: Cm 1:6 ( 1 Cement : 6 Coarse Sand Etc Complete , 50.6.3.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x10 Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level For 10 Cm Thick Wall In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Including Cost Of Scaffolding Complete , 13.1.1Cement Plaster12 Mmof Mix: 1:4 ( 1 Cement : 4 Fine Sand) , 13.7.1Cement Plaster 12 Mmfinished With A Floating Coat Of Neat Cement Of Mix: 1:3 ( 1 Cement : 3 Fine Sand) , 11.37Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600 X 600 Mm. , 11.41.3 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 800X 800 Mm , Od31976/2023_2024Providing And Fixing First Quality Vitrified Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 11.48.2 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg). Including Filling /Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , 11.48.3Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg). Including Filling /Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 800X800mm , 11.55.1 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , 50.9.1.1Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood , 50.9.2.1Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineerin - Charge. Using Anjili/ Jack Wood , 21.1.1.2 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately): For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 21.1.2.2 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides , Od31977/2023_2024 Supplying And Fixing Flush Door Shutter, Shutter Of Required Size, Thickness 30Mm Thick, Finished With 1 Mm Laminate Of Approved Shade With 9 X 16 Clear Glass Vision Panels As Per Design Including Necessary Hinges , Od31978/2023_2024 Frosted Film - Supply And Installation Of 3M Make Frosted Film Pattern Throughout All The Internal Glass Panels Wherever Required Of Approx. 1.5 M Height As Per The Approved Pattern. , Od31979/2023_2024 Providing And Fixing Extruded Section Body Tubular Type Universal Hydraulic Door Closer(Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete , Od31980/2023_2024 Providing And Fixing 4.00 Mm Thick Acp Sheet For Cupboard Including All Cost, Conveyance, Labour Charges Etc Complete , 21.3.1 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , 12.45.2 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/ Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board Conforming To Is; 2095-Part I , 12.54.1 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Soffit With Help Of Soffit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Sixe38x12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C/C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms/Sqm (Both Side Inclusive), Fixing With Clip In Tiles Into Spring T With :Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25 Mm Height, ,Made Of G.I Sheet Having Galvanizing Of 100 Gms/ Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending . , 12.58.1 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Sections (Galvanized @ 120 Grams/ Sqm, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Space Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening Of Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process To Give Stable Crystalline Structure With Minimum Compressive Strength 225 Kg/ Sq. Cm, Bending Strength 100 Kg/Sq. Cm, Of Size 595X595 Mm, Having Perforation Of Dia, 10 Mm With Minimum Perforated Area 18% With Non Woven Tissue On The Back Side, Having An Nrc (Noise Reduction Coefficient) Of 0.85, With 50 Mm Thick Rockwool Of 48 Kg/Cum Backing. , 21.4.2Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is: 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors, Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer -In- Charge.With Brass Cover Plate Minimum 1.25 Mm Thickness , 21.13 Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , 50.9.11.1Providing And Fixing Thomson Multi Wood Board Or Equivalent Make Paneling 12 Mm Thick, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately) As Per The Direction Of Site Engineer-In-Charge. , 50.9.12.1 Providing And Fixing Thomson Multi Wood Board Or Equivalent Make, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer (Fittings To Be Paid Separately) As Per The Direction Of Site Engineer-In-Charge. , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.69.1 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work , 13.80Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 13.83.2Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour.Two Coats , 13.47.1Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) , 10.16.3 Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Electric Resistance Or Induction Butt Welded Tubes , Od31981/2023_2024Roofing Sheet With Sandwich Puf Roof Panel With 0.40 Mm Or Nearest Size Pre Painted Galvalume Sheet At Top & Bottom , 30 Mm Or Nearest Size Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete , Od31982/2023_2024 Wall Cladding With Sandwich Puf Wall Panel With 0.40 Mm Or Nearest Pre Painted Galvalume Sheet At Top &Bottom , 30 Mm Or Nearest Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete. , Od31983/2023_2024 Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses. , 17.2.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , 17.7.1 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , 50.17.1.2 Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge , 50.17.1.5Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 50.17.1.1 Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 17.31 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Od33878/2023_2024 Supplying And Fixing Stainless Steel Mirror Finished H Type Handles Including Material Cost, Conveyance And Fixing Charges Etc Complete. , 50.18.7.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 15Mm Dia 12Kgf/Cm2 -Internal Work- Exposed On Wall , 50.18.7.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , 50.18.8.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer- In- Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 12 Kgf/ Cm2 , 50.18.8.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 32 Mm Pipe 10Kgf/Cm2 , 50.18.8.9.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 110 Mm Pipe 6Kgf/Cm2 , 50.18.9.8.2 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching And Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 4 Kgf/Cm2 , Od31984/2023_2024 Providing And Fixing 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Pvc Hollow Section Of Size 59 X 24 Mm And Wall Thickness 2 Mm With Inbuilt Edging On Both Sides. The Styles And Rails Mitered And Joint At The Corners By Means Of M.S. Galvanized/Plastic Brackets Of Size 75 X 220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Fixing Galvanized M.S. Tube Of Size 20 X 20 Mm And 1 Mm Wall Thickness. The Lock Rail Made Up Of H Section, A Pvc Hollow Section Of Size 100 X 24 Mm And 2 Mm Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanized M.S. U Cleats. The Shutter Frame Filled With A Pvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Fixing Horizontally 6 Mm Galvanized M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). , Od31985/2023_2024 Supplying And Fixing Name Board Of Various Sizes Using Foam Sheet Board Including Lettering As Per The Direction Of Departmental Officers Including Cost, Conveyance And Fixing Charges Etc Complete. 45X14cm Size , Od31986/2023_2024 Supplying And Fixing The Name Board Of Size 80 X 30 Using Acp Board With Acrylic Lettering Including Cost, Conveyance And Labour Charges For Lettering And Fixing Etc Complete , Od31987/2023_2024 Supplying And Fixing Inaugration Board Using Granite Slab Including Lettering As Per Direction Of Departmental Officers Including Cost Of Granite, Lettering And Fixing Charges Etc Complete. Size: 100X84cm , Supplying And Fixing Skylight Of Size 1.2Mx 1.8M With Designed Acrylic Sheet Including 4 Numbers Led Tube As Per The Direction Of Engineer In Charge , Od31989/2023_2024 Computer Chair The Medium Back Adjustable Revolving Chair Made With Mesh Back Within Built Handle In The Nylon Finish, The Back Is Designed Extra Lumber Support. The Seat Have Provided Seat Cover In Pp Made With 12Mm Hot Pressed Ply And Pu Moylded Foam. The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking. The Base And Pin Wheels Are Made In The Nylon. 120Mm H Gas Lift Should Be Provided With Tower Bellow , Od31990/2023_2024 High Back Chair Made With Feather Foam Seat & Mesh Back With Lumber Support. , The Gas Lift Mechanism Should Be Tested As Per Bifmastandards. The Pedestal Should Be Five Legged Injection Mouldedin Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, It Should Have Synchro Any Anglelocking Arrangement , Od31991/2023_2024Providing And Fixing Trap Doors For Access To The Areas Above False Ceiling. The Trap Door Shall Have An External Frame Made Of Powder Coated Aluminium Channel On Which The Shutter Is Hinged. Shutter Shall Be Made 3 Mm Thick Acp Sheet Shutter External Frame Of Shutter Made Of Powder Coated Aluminium Channel. Concealed Heavy Duty Hinges Shall Be Used To Mount The Shutters And Locking Shall Be Provided. The Shutter Shall Be Moulded In Level With The False Ceiling Forming A Groove All Around. Sufficient Number Of Hinges And Locks Shall Be Provided To Avoid Sagging Of The Shutter. Key Also Shall Be Supplied. No Extra Rate Shall Be Provided For Suspenders Or Frame Works All Round For Linking The Trap Door To Gyp Board /Any Other False Ceiling. The Rate Including All Labour Charges ,Material Charges Ect Complete. , Od33559/2023_2024 Supplying And Laying Polyster , Washable And Stainfree Cloth(Bio-Active Fabric Washable Germfree-Suitable For Icu Room) Curtain System With Maximum Curtain Cloth Height 230Cm (Top 30 Cm White Colour Net And 200Cm Light Blue Colour As Per Approval) Stitching With Stifiner Tape,Pleats,Ironing And Laying In Icu Room Around Each Bed Using Pvc Runner With Hooks&Stopper For Hanging/Sliding Etc. As Per The Direction Of Engineer In Charge Including Conveyance To Site , Laying In Line And Level , Sealing All Cuttings In False Ceiling With Powder Coated Ms Cup ,All Leads And Lifts Including All Labour Charges Etc. Complete.(Unpleated Length Of The Cloth Maesurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measuremnet)/Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube Hanging Support Of Required Length (App. Length 1.10M) One End Fixing From Slab By Using 6Mm Dia. Expansion Bolt At A Distance Not More Than 2 M, C/C Down End Fixed To Powder Coated Aluminium Channel Frame 45X20mm X1mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level ,Sealing All Gaps In False Ceiling Due To Hanging Supports ,All Leads And Lifts, Including All Labour Charges Etc. Complete. , Od33560/2023_2024 Providing And Fixing Vertical Blinds As Per The Direction Of Engineer In Charge , Furniture& Other Works: Lead Lined Door Shutters: 2Mm Lead Lined Door Shutterswithsolid Cored(30Mm) Lead(2Mm) Lined Flush Door Side Hung Two Rebated Shutters With Plywood(6Mm) & Laminated (1Mm) On Both Sides And All Accessories ( Ss Hinges (4 Nos), Tower Bolt , Ss Handles Etc..) , Lead Lined Door Frames: Lead(2Mm) Lined Flush Door Side Hung Single Shutter With Plywood(6Mm) &Laminated (1Mm) On Both Sides And All Accessories(Lead Sheet Should Overlap Door Frame & Wall )Includingproviding Wood Work In Frames Of Doors And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length , Using Good Quality Anjili Wood /Jack Wood (Frame Size 12 Cm X 8 Cm) , Wood Frame For Fixing Lead Glass (Lead Sheet Should Overlap Door Frame & Wall ) , Steel Cupboard (Godrej) For Storage 6Ft Tall 3 Feet Width , Providing And Fixing 2.0Mm Th. Vinyl Floor With Rubber Based Adhesive Over Clean And Smooth Surface Including Finishing By Rolling A Light Roller All Complete. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Wiring For Group Controlled (Looped) Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point ( Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. Group C , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X 2.5 Sq. Mm + 1 X 2.5Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required.4 X 6 Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq.Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required.3 X 2.5Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 4 Sq. Mmm , Supplying And Drawing Following Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor,Unarmored Telephone Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required.2 Pairs , Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25Mm , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable , Cat 6 Rj 45 Computer Jack Modular Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5/6 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 2 Way 5/6 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5/6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Telephone Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Tv Antenna Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 1 Or 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 6 Module (200Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 8 Module (125Mmx125mm) , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Extra For Fixing The Louvers/ Shutters Complete With Frame For An Exhaust Fan Of All Sizes , Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Color Washing Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep , Supply Of 300/305 Mm Sweep Light Duty Exhaust Fan In Metal Frame Working On230 Va/C , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required4 Way (8+12) - Three Phase Double Cover (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required6 Way (8+18) - Three Phase Double Cover (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way (8+12) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way (8 + 18) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) , Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface/ Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/ Rccb/Isolator)2+12 Way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , Supplying And Fixing Following Rating, Four Pole, (Three Phaseand Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Dbcomplete With Connections, Testing And Commissioning Etc. Asrequired. 63 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , Supplying And Fixing Following Rating, Three Pole, Mcb63 A Rating, 3 Pole, Mcb , Supplying And Fixing Following Rating, Three Pole, Mcb 40 A Rating, 3 Pole, Mcb , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required100 Amp, 30 Ka 4 Pole , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required125amp, 36Ka , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required. 16A -100A, 35/36 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm (Clamped With 25X3mm Ms Flat Clamp) , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 185 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 240 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 25 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 50 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 10 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 16 Sq Mm With Factory Made Clamp , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 70 Sq Mm , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armoured Aluminum Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 70 Sq Mm , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.225Mm Width X 50Mm Depth X 1.6Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etcas Required 225 Mm Width X50 Mm Depth X 1.6 Mm Thickness , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 50 Sqmm , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1/2X 70 Sq. Mm (38Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X 95 Sq. Mm (45Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X 185 Sq. Mm (57Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X 240 Sq. Mm (62Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 10 Sq. Mm (25Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 16 Sq. Mm (28Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 25 Sq. Mm (28Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 50 Sq. Mm (35Mm) , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 16 Sq.M , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required.25 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required.10 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 50 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.25 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.16 Sq.M , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.10 Sqmm , Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required.25Sq - 95Sq Mm With 20 Mm Wide X 1.20 Mm Thick Clip , Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required. 4Sqmm-16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required2.65 Mm Copper Conductor (12 Swg) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required4.00 Mm Copper Conductor ( 8 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.2.65 Mm (12 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 3.15 Mm (10 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 4.00 Mm (8 Swg) , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal/ Coke And Salt As Required. , Supply And Clamping The Following Size Of Strips On Surface Of Wall/ Parapet/ Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Color Washing Etc. As Required (For Horizontal Run) 25 X 3 Mm Copper Strip , Supplying, Threading, Laying And Jointing Of The Following Sizes Of B Class Gi Pipe With All Required Accessories In Ground In Trench As Protective Covering To Earth Leads40mm Dia , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Meter Below Ground As Strip Earth Electrode, Including Connection/ Terminating With Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm) , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required2.00 Mm Copper Conductor ( 14 Swg) , Supply Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From Crca Sheet 0.5Mm Thickness With All Accessories And Lamps Directly On Wall And Giving Connections With 16/0.20 Mm 3 Core Pvc Insulated And Sheathed Round Copper Conductor Flex Wire Or Extending The Original Wiring And Giving Connections As Required 1200 Mm 1X20w Led Lamp With Box Type Fixture , Supply & Installation Of Light Fittings On Tw Round Block
Supply, Conveyance Installation Testing And Commissioning The Light Fittings Of Following Types Made Of Crca With 0.5Mm Thickness Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16/0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.1200Mm 1X20w Led Lamp With Box Type Fixture , Recess Mounted Led Luminaire With Full Diffuser Type Upto 36 W (Max), 2X2 Led, Cool White, 5700K, White Powder Coated Crca Housing, Wipro Crco10r038hp57gl1 Or Bajaj Bzrsql 36W Gzi Cw Or Equivalent , Frame For Fixing Recess Mounted Led 2X2 Ft Luminaire 608 Mm X 608 Mm , Recess Mounted Circular Led Retrofit Downlighter, 15W, Powder Coated White Finish, Bpslr 15W Wh Bajaj Or Equivalent , Supplying And Fixing Of 6 / 7 W Pin Type Led Bulb In The Existing Angle Batten Etc As Required (Philips, Wipro Or Similar Superior Make) , Sitc Of 400Mm Sweep Meduim Duty Wall Fans With Metallic Vanes (Make: M/S Almonard/ Crompton/Bajaj Or Equivalent) , Abc Powder Type Fire Extinguisher With Nabl Approval, Fights Class A, B, C And Electrically Started Fires. , Fire Extinguisher Carbon Di-Oxide Type With Nabl Approval , Charges For Dismantling The Existing Electrical Installations Complete Making Good The Damages Of The Wall And Conveying The Dismantled Materials To Store Etc As Required. , Numbering Of Ceiling Fan / Exhaust Fan/ Fluorescent Fittings As Required. , Copper Pipe With Superlon Insulation For Suction And Discharge , Pvc Drain Pipe With Proper Insulation , Weather Proof 3 Core Copper Wire For Indoor To Outdoor Connecting Cable (Size As Per The Requirement Of Ac Manufacturer) , Core Cutting Charges Including Making The Surface Finished With Plastering And Painting, Making Good And Finishing With Matching Surface After Housing Pipe Etc. , Supporting Stand For Fixing Outdoor Unit(Powder Coated) , 4 Kva Voltage Stabilizer Wall Mount Type With Time Delay, High& Low Voltage& Thermal Overload Protection, Input Voltage: 170-220V, Output Voltage : 200-240V, High Voltage Cut Off : 240V, Efficiency: >95%, Frequency : 50Hz, V Guard Vg 500 Or Equivalent , Supply, Conveyance Testing And Commissioning Of 2 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar/Lg(Dual Inverter Type)/Voltas/Mitsubishi Or Superior Superior Brands, Cooling Capacity 6000 Kw/Hr With Rotary/Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500/450, Led/Lcd Display , Supply, Conveyance Testing And Commissioning Of 1 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar/Lg(Dual Inverter Type)/Voltas/Mitsubishi Or Superior Brands, Cooling Capacity 3000 Kw/Hr With Rotary /Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500/450, Led/Lcd Display , Sitc Of 19 Mm Thick Nitrile Rubber For Under Deckinsulation , Charges For Cutting Holes Suitable For Accommodating The Supply Ducts Including Plastering, Color Washing Etc. As Required. , Outdoor Unit Stand With Ribbed Rubber Pads , Electrical Cabling Between Indoor And Outdoor Units, With Required Size Cables/Wires(Havells/Rr Kabel/V-Guard Frls Wires) , Supply, Installation, Testing And Commissioning Upvc Drain Pipe 6Kg/Sq.Cmof Suitable Dia Connecting The Drain Pan Of The Indoor Units To Nearest Drain Point, With 12Mm Thick Closed Cell Elastomeric Insulation As Per Specification , Motorized Volume Control Damper For Individual Operation Of Ductable Split Air Conditioners , Supply And Fixing Of Canvas Connection And Ribbed Rubber Pads As Vibration Isolators , Providing And Fixing Of Thermal Insulation Lining With 13Mm Thick Nitrile Rubber Closed Cell Type With Adhesive, On Supply Duct. , Providing And Fixing Of Acoustic Duct Lining With 10Mm Thick Nitrile Rubber Open Cell Type Inside The Ducts , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminum Continuous Grilles 150Mm High For Return Air As Per Spec , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminimum Continuous Grilles 150 Mm High For Supply Air With Aluminum Damper As Per Spec , Supply, Installation, Testing And Commissioning Of Volume Control Duct Damper Made Of Extruded Aluminum For Ducts/Collars To Be Provided With Suitable Links, Lebers And Quadrants For Manual Control Of Volume Of Air Flow And For Proper Balancing Of The Air Distribution In The Main Duct Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc., As Per Specifications. , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges ,Supports, Gi Rods , Anchor Bolts ,Gi Nuts And Bolts, Pvc/ Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof /Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 24G , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges ,Supports, Gi Rods , Anchor Bolts ,Gi Nuts And Bolts, Pvc/ Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof /Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 22G , Supply, Installation, Testing And Commissioning (Sitc) Of 8.75 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu/Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring(Max 3M From Isolator) And Control Cabling(Indoor To Outdoor),Thermostat Wiring, High-Low Pressure Cut Out,Suitable For Three Phase 440V Supply Etc Complete As Required , Supply And Providing Copper Earth Bus In The Panel Board , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale (0-200)A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp, Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh, Incomer 200A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos Out Goings 160 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos.The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specifications.Pn Busbar Chamber With Copper Busbar. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switch Gears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh Incomer 160A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 160A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 125A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos %Icu= 25Ka) - 2 Nos 63A Fp Mccb - 3 Nos The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification. , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A/400A, 50/55 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Suitable De- Humidifier Units : Extraction At Least 35 Litres/Day, Compresor : Rotary, Air Flow : At Least 220M3/Hr, Reputed Brand, Input 230Vac , Charges For Obtaining Electrical Inspectorates Approval Including Scheme Apporval And Final Approval And Regularizing With Kseb , 24-Port Gigabit Manageable Smart Network Switch With 2 Sfps. Rack Mountable , Patch Panel - 24-Port Patch Panel With Cable Tray. Rack Mountable , 4U Rack- Wall Mountable Including 4X 6Amp Power Distribution Box , Supply Of Branded 1Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 2Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 3Mtr Patch Cords With Cat 6 Cable. , Buy Back Offer Of Old Ct Simulator Available At Mch Kohikode , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalised, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Busbars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale. (0-200)A Class 1 With 90 Deg Defl. Scale Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp Digital Multifunction Meter To Read V,A.Hz,Pf,Kwh Surge Protection Device (Type1+2) Incomer 400A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 200A Copper Tpn Busbar Chamber With Copper Busbar Out Goings 250A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 160A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 100 A Fp Mccb Isolator-2Nos 63 A Fp Mccb Isolator-2Nos The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification (Not Taken For Evaluation) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale. (0-200)A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp, Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh Incomer 250A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 250A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 200 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos. 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos. 63 A Fp Molded Case Circuit Breaker - 2 Nos.The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification (Not Taken For Evaluation) , Supply, Installation, Testing And Commissioning (Sitc) Of 11 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu/Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring(Max 3M From Isolator) And Control Cabling(Indoor To Outdoor),Thermostat Wiring, High-Low Pressure Cut Out,Suitable For Three Phase 440V Supply Etc Complete As Required (Not Taken For Evaluation) , Ct Fluoroscopy (Not Taken For Evaluation) , Branded Personal Computer With Printer (Not Taken For Evaluation) , Led View Box 3 Film (Not Taken For Evaluation) , Apple Osrix Workstation (Not Taken For Evaluation) , Neuro Package Including Neuro Dsa & Neuro Perfusion (Not Taken For Evaluation) , Spectral Package Including Twin Spiral Spectral Viewing, Dual Energy And Calculi Characterization (Not Taken For Evaluation)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
33.
Housing Urban and Rular Development #10482162 Price Bid
Construction Of Under Ground Reservoir ( Ugr ) In Block-B, Sector-26 At Rohini Phase-Iv.Sh:Sitc Of Clear Water Booster Pump Set And Allied Accessories At Ugr Sector-26 Rohini ; 1 Supply, Installation, Testing & Commissioning Of Horizontal Split Casing Centrifugal Pump Set With Bronze Impeller Directly Coupled Through Flexible Coupling With Tefc Squirrel Cage Induction Motor Of Suitable Rating For Operation On 415 Volts, 3 Phase, 50 Hz Ac Supply, Mounted On Common M.S Channel Base Frame Complete With Foundation Bolts, Nuts, Washers, Coupling Guard, Pressure Gauge 100Mm Dia With Copper Tubing, Brass Stop Cock, Water Drain Pipe Of Suitable Size And Length, Required Size Of G.I Taper And Anti Vibration Mounting Pads, Rcc Foundation ( 1:2:4 ) Etc. Complete As Per Specifications Attached. The Pump Shall Be Capable To Perform The Following Duties:- A ) Discharge : 118.8 M³ / Hourb ) Head: 26 M C ) Type Of Liquid :Clear Waterd ) R P M : 1450 2 Supplying, Installation, Testing And Commissioning Of Sewage Submersibledrainage Pump Of 300 L / Min Discharge Of Water At 10 M Head Having Solid Handling Capacity Of 35Mm Complete With Base Plate And All Accessoriessuitable For Operation On 220 Volts, Single Phase50hz., A.C. Supply Complete With Starter For Automatic Operation I / C Water Level Sensing Device, Inter Connection, And Submersible Cable Etc. Complete As Reqd. 3 Supplying And Installation Of Following Size M.S Black Pipe Including M.S Flanges Duly Screwed And Welded On Both Ends Of Pipe, Bend, Tee, Nipple Rubber Gasket, G.I Nuts, Bolts And Washers, Support Etc. Complete As Required.A. ) 150 Mm Dia ( Heavy C Class ) Conforming To Is:1239 Part1 ( 2004 ) With Upto Date Amendment. 4 Supplying And Installation Of Following Size M.S Black Pipe Including M.S Flanges Duly Screwed And Welded On Both Ends Of Pipe, Bend, Tee, Nipple Rubber Gasket, G.I Nuts, Bolts And Washers, Support Etc. Complete As Required. B. ) 100 Mm Dia ( Heavy C Class ) Conforming To Is:1239 Part1 ( 2004 ) With Upto Date Amendment. 5 Supplying And Installation Of Following Size M.S Black Pipe Including M.S Flanges Duly Screwed And Welded On Both Ends Of Pipe, Bend, Tee, Nipple Rubber Gasket, G.I Nuts, Bolts And Washers, Support Etc. Complete As Required. C. ) 50 Mm Dia ( Medium B Class ) Conforming To Is:1239 Part-1 ( 2004 ) With Upto Date Amendment. 6 Supplying And Fixing Of Cast Iron Double Flanged Sluice Valve Pn-16 Conforming To Is:14846, Rising Spindle Type Of Following Size: Complete With Nuts, Bolts, Washers, Rubber Insertions, Necessary Support, Hand Wheel Including Painting And Testing Etc Completerequired As Per Technical Specification Attached. A. ) 100 Mm Dia 7 Supplying And Fixing Of Cast Iron Double Flanged Sluice Valve Pn-16 Conforming To Is:14846, Rising Spindle Type Of Following Size: Complete With Nuts, Bolts, Washers, Rubber Insertions, Necessary Support, Hand Wheel Including Painting And Testing Etc Completerequired As Per Technical Specification Attached.B. ) 150 Mm Dia 8 Supplying And Fixing Of Cast Iron Double Flanged Non Return Valve Pn-16 Confirming To Is: 5312 Without By Pass Arrangement Of Following Size Complete With Nuts, Bolts, Washers, Rubber Insertions Necessary Support, Including Painting And Testing Etc, As Required. A. ) 100 Mm Dia 9 Supplying And Fixing Of Cast Iron Flanged Foot Valve Confirming To Is: 4038 Of Following Size Complete With Nuts, Bolts, Washers, Rubber Insertions Including Painting And Testing Etc, As Required. A. ) 200 Mm Dia 10 Supply, Installation, Testing And Commissioning Of Mild Steel Double Flanged Dismantling Joints Of Pressure Rating Pn16 Of The Following Sizes Complete Withginuts, Bolts, Washers, Rubber Insertions, Painting & Testing Etc. As Required.A. ) 100 Mm Dia 11 Supply, Installation, Testing And Commissioning Of Mild Steel Double Flanged Dismantling Joints Of Pressure Rating Pn16 Of The Following Sizes Complete Withginuts, Bolts, Washers, Rubber Insertions, Painting & Testing Etc. As Required.B. ) 150 Mm Dia 12 Supplying And Fixing Of Bronze Globe Valve Of 50 Mm Dia In The Existing Pipe Complete With Rubber Insertions, Teflon Tape Accessories Including Painting And Testing Etc, As Required. 13 Sitc Of Floor Mounted Free Standing Type L.T. Cubical Main Feeder Pillar Duly Compartmentalized ( Outdoor Type ) Made Out Of 2 Mm Thick Ms Crca Sheet, 7 Tank Process Powder Coated, With 4 Nos. X 600 Mm Long Legs Made Of M.S Angle Iron Of Size 40 Mm X 40 Mm X 5 Mm Thick Along With Frame & Legs Suitably Grouted In Foundation I / C Connection Inter Connection Of The Accessories Mounted There On With Suitable Size Of Copper Wire / Strip With Thimble / Lugs, Earthing The Body Of The Feeder Pillar Suitable For Operation On 415V, 3 Phase, 50Hz Ac I / C Supply & Fixing Of The Following Items And As Per Technical Specification Enclosed. A ) 250 A, 50Ka, Fpmccb ( Ics= Icu ) - 1 No ( Incomer ) B ) 63 Amp Tp Mccb, 25 Ka Breaking Capacity= 5 Nos. ( 4 Nos. For Pump Set+1 No. For Iei ) - Outgoingc ) 32 Amp Dp Mcb C Series-4 No.D ) Volt Meter ( 0-500V ) 96 Sq.Mm With Selector Switch – 1 Sete ) Amp-Meter ( 0-100A ) 96Sq.Mm With Selector Switch & 100 / 5 Amp Ratio Cts – 1 Setf ) Led Type Ryb Phase Indicating Lamps, On, Off, Trip Indicating Lampsh ) 6 Amp Sp Mcb – 1 No.I ) 3 Phase 440 Volts Power Shunt Capacitor 7 Kvar ( With 63 Amps Tp Mcb ) Including All Accessory Complete - 4 Setsj ) Single Phase Preventerk ) Star Delta Starter Suitable For Item No.1 Load- 4 Set.L ) 400 Amp, 4 Strip Sleeved Aluminium Busbar – 1 Setm ) Danger Notice Plate – 1 No.N ) 6 Pin 15 A Switch / Socket Outlet - 1 Seto ) Lighting Inside The Feeder Pillarfor All Mccb ( Ics= Icu ) . Outgoing Mccb Of Motor Shall Be Of Motor Grade.Note: Foundation Height Of 750 Mm Duly Plastered & Finishedhaving Top Outer Edges 30 Cm Beyond All Round The Edges Of 40X5 Angle Iron Frame Shall Be Made As Per Site Requirementfor Which Nothing Extra Shall Be Paid. 14 Supplyingof The Following Sizes Of Xlpe Insulatedaluminium Conductor Armoured Cable Of 1.1 Kv Grade Confirming To Is: 7098 Part-1 With Upto Date Amendment. A. ) 3.5 C X95 Mm² 15 Supplyingof The Following Sizes Of Xlpe Insulatedaluminium Conductor Unarmoured Power Cable Of 1.1 Kv Grade Confirming To Is: 7098 Part-1 With Upto Date Amendment.A. ) 3 C X50 Mm² 16 Supplyingof The Following Sizes Of Xlpe Insulatedaluminium Conductor Unarmoured Power Cable Of 1.1 Kv Grade Confirming To Is: 7098 Part-1 With Upto Date Amendment. B. ) 4 C X16 Mm² 17 Supplyingof The Following Sizes Of Xlpe Insulatedaluminium Conductor Unarmoured Power Cable Of 1.1 Kv Grade Confirming To Is: 7098 Part-1 With Upto Date Amendment. C. ) 3 C X4 Mm²flat Cable 18 Supplyingof The Following Sizes Of Xlpe Insulatedaluminium Conductor Unarmoured Power Cable Of 1.1 Kv Grade Confirming To Is: 7098 Part-1 With Upto Date Amendment. D. ) 3 C X4 Mm² 19 Supplying And Installing Following Size Of Perforated Pre-Painted M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Paintingsuspenders Etc As Required.A. ) 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 20 Supplying And Installing Following Size Of Perforated Pre-Painted M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Paintingsuspenders Etc As Required.B. ) 100 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 21 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%, , Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.A. ) 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 22 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group-B 23 Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Alongwith 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 24 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.A. ) 6 Pin 15 / 16 A Socket Outlet 25 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required. A. ) 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire 26 Supplying And Fixing Of 90 Watt Led Street Light Luminaire Made Up Of Pressure Die Cast Aluminium Alloy Housing Withip 66, Ik07 Protection, System Efficacy>110 Lm / W Lumens, Integral Electronic Driver With Apfc, Thd<10%, Output Short / Open Circuit Protection, Surge Protection Upto 10 Kv ( With External Spd ) Phase To Phase ( 440 V ) / Over Voltage Protection & Other Safety Test As Per Is 15885 Part-2 / Sec 13. Cri>70, Cct 5700 K Suitable To Operate On 240 V, 50 Hz, A.C Supply. Installation On Bracket Of 1 Mtr Lengthmade Of Suitable Dia Gi Pipe On Surface / In Recess With All Required Accessories Including Connections, Testing Etc. Complete As Required With Minimum 5 Years Guarantee / Warranty 27 Supplying, Installation, Testing And Commissioning Of 24 Watt Prewired Led Batten With Aluminium Housing And Integrated Electronic Driver Efficiency>88%, Inbuilt Surge Protection Of 2.5 Kv, Cri>80, Cct 6500 K, Thd<20, Lumen Output > 100 Lm / Wattcomplete With All Accessories Directly On Ceiling / Wall Suitable For Operation On 230V, 50 Hz Ac Supply Including Connection With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor , Single Core Cable And Earthing Etc. As Required With Minimum 2 Years Guarantee / Warranty. 28 Supply Of Celling Fan Of 1200 Mm Sweep Sizes With Minimum 226 M3 / Hr. Air Delivery Operating On Single Phase 50 Hz, 230V, Ac Supply, Complete Etc. As Required. 29 Supplying And Fixing Extra Conduit Down Rod Of 20 Cm Length G.I. Pipe 15 Mm Dia, Heavy Gauge Including Painting Etc. As Required. ( Note : More Than 5 Cm Length Shall Be Rounded To The Nearest 10 Cm And 5 Cm Or Less Shall Be Ignored ) 30 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 31 Supply Of Exhaust Fan Operating On Single Phase50 Hz230 Volt Ac Supply Of 300 Mm Sweep Size Min 1600 M3 / Hr. Air Delivery At Rated Speed 1380 Rpm In Metal Body, Bird Guard To Protect The Fan In Running Condition, Guarantee / Warranty Of 2 Years With Complete Kit & Required Accessories For Installation Etc As Required 32 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Up To 450 Mm Sweep. 33 Extra For Fixing The Louvers / Shutters Complete With Frame For Exhaust Fan Of All Sizes 34 Numbering Of Ceiling Fan / Exhaust Fan / Fluorescent Fittings / Led Fitting / Led Street Light Fitting Etc As Required. 35 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) . A. ) 12 Way , Double Door 36 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A. ) Single Pole 37 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.B. ) Double Pole 38 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal / Coke And Salt As Required. 39 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection / Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. ( Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm ) 40 Providing And Fixing 25 Mm X 5 Mm G.I. Strip On Surface Or In Recess For Connections Etc. As Required. 41 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 42 Supplying And Replacement Of Insulation Mat For Electric Purpose Confirming To Is 15652 / 2006, Duly Isi Marked With Anti-Skid Abrasion Size 1 Mtr.X 2 Mtr., B-Class, Thickness 2.5 Mm For 11 Kv Working Voltage. 43 Sitc Of Is: 15683 Marked Powder Stored Pressure Type Portable Fire Extinguisher With Is: 14609 Marked Abc Powder ( M.A.P 90% ) Capacity 6 Kg Complete With Squeeze Grip Release Valve Discharge Pipe Locking Arrangement Pressure Gauge Operation Manual Bracket With Two Screws & Sleeves Etc. Complete As Required 44 Sitc Of Co2 ( Carbon Dioxide ) Fire Extinguisher Isi Marked Confirming To Is: 15683. Capacity 4.5 Kg Complete With Delivery Hose Horn, Locking Arrangement, Operation Manual, Bracket With Two Screw And Sleeve Etc. Complete As Reqd.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Delhi View Result →
34.
Housing Urban and Rular Development #10452608 Price Bid
Tender For Supply Installation Testing Commissioning Of Fire Detection And Fire Fighting System Work In Simulator Block And Firing Rang For Ncc Campus Jln Marg Jaipur -Supplying, Installation, Testing & Commissioning Ofelectrical Driven Fire Fighting Duty Terrace Pump As Per Tac Andis 12469-1988., Factory Assembledin Pump Make Oemsuitable For Automatic Operation And Consisting Of Following Details Given Asa, B, C, D, E, F, G And H. 2 ( A ) Horizontal End Suction Centrifugal Back Pull Type Pump Complete For Delivery Of Below Mentioned Discharge And Head 3 ( B ) Material Of Construction : Pump Casing - Cast Iron, Impellor- Bronze, Shaft - Ss 410, Packing - Mechanical Seal 4 ( C ) Squirrel Cage Induction Motor ( Ie-3 Class ) Suitable For 3 Phase, 415 V, 50 Hz, Ac Supply , Class -F Insulation, Synchronous Speed Not Exceeding 3000 Rpm, T.E.F.C Confirming To Ip:55 , Of Required Hp Suitable For The Above Pump , Along With Flexible ( Love Joy Type ) Coupling , Coupling Guard Complete In All Respect . 5 ( D ) Common Bed Plate Fabricated Frommild Steel Channel For Installation Of Pump And Motor Including Anti Vibration Pads. 6 ( E ) The Hydrostatic Tests ( 2 Times Of Design Operating Head Or 1.5 Times The Shut Off Head Whichever Is Higher ) And Performance Tests ( To Determine Developed Head, Pump Bhp And Efficiency V / S Flow ) Of Pumps Along With Trip Test Shall Be Carried Out At Manufacturer’S Works In Virtual / Physical Presence Of Department’S Representatives. 7 ( F ) Physical & Chemical Test Reports Of I ) Pump Casing ( Ii ) Impeller ( Iii ) Shaft ( Iv ) Shaft Sleeveand Dynamic Balance Certificate Is To Be Submitted By Oem 8 ( G ) Suitable Size Reinforced Cementconcreat ( M-30 ) Foundation With Foundation Bolt, Nozing Angle Of Size 40Mm X40mm X5 Mm ( Cost Of Rcc Foundation To Be Paid Extra ) 9 ( H ) Weather Proof Hood Fabricated From 5Mm Thick Uv Stablised Frp Sheet Supported By 50 Mm X 50 Mm X 5 Mm Angle Iron Fram Above Pumpset To Protect It From Weather All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 10 900 Lpm With 35 Mtr Head 11 Providing, Fixing, Jointing, Testing & Commissioning Of Heavy Duty Ms C Class ( Heavy ) Pipes Conforming To Is 3589 / 1239 Part-I For Hydrant And Sprinkler Applicationsincluding Cutting, Screwing, Welding Etc. & Forged Steel Fittings Like Elbows, Tees, Tapers, Reducer, Gaskets Etc. Fixing The Pipe On The Wall / Ceiling With Suitable Clamps, Hanger And Nuts Bolts Including Cutting Hole And Chase In Brick Or Rcc Walls / Slab And Making Good The Same. Complete With Painting Of One Coats Of Red Oxide And Two Or More Coats Of Synthetic Enamel Paint Of Requiredshade Complete As Required. ( Pipe To Be Tested @ 10Kgf / Sqcm For 2 Hrs. ) . All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 12 25 Mm Dia 13 32 Mm Dia 14 40Mm Dia 15 50Mm Dia 16 80 Mm Dia 17 100 Mm Dia 18 Supplying And Fixing Of Pn 16 Flanged Y Strainer Fabricated Out Of Cast Iron Body, Ss 304 Strainer With Perforated Screen With 3 Mm. Dia Holesin Existing Ms / Gi Pipe Complete With 2 No. Matching Flanges ( Minimum 16 Mm Thick ) , Nuts, Bolts, Washers, Gaskets Etc As Required Of Following Sizes. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 19 100 Mm Dia 20 Supplying And Fixing Of Pn 16 Cast Iron Dual Plate Wafer Type Check Valve / Non Return Valve With Ss / Bronze Flap Complete With 2 No. Matching Flanges ( Minimum 16 Mm Thick ) , Nuts, Bolts, Washers, Gaskets, Etc As Required Of Following Sizes. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 21 100 Mm Dia 22 Supplying And Fixing Of Pn 1.6Butterfly Valve ( Wafer Type ) With S.G Iron Disc And Confirming To Is:13095 Complete With 2 No. Matching Flanges ( Minimum 16 Mm Thick ) , Nuts, Bolts, Washers, Gaskets, Etc As Required Of Following Sizes. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 23 100Mmdia 24 Supplying And Fixing Of Pn 16 Brass / Gm Ball Valves With Screwed End, Ss Ball Including Teflon Tape Etc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 25 25 Mm Dia. 26 Supplying And Fixing Of Ss 304 Single / Double Headed Oblique Pattern Hydrant Landing Valve ( Internal / External ) With 75 / 100 Mm Dia Flanged Inlet & 63 Mm Dia Instantaneous Type Female Outlet Coupling With Cast Iron Wheel Complete With Abs Cap And Chain And All Accessories As Per Is:5290-93 ( Type-A ) In Cluding Matching Flange ( 14 Mm Thick ) , Nuts, Bolts, Washers, Gaskets, Etc As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 27 Single Headed With 75 Mm Dia. Flanged Inlet 28 Supplying & Fixing Ss-304 Short Branch Pipeconforming To Is: 903:93 Fitted With 20Mm ( Nominal Internal Diameter ) Bore Nozzle, For Projecting Water In Form Of Solid Jet. The Branch Shall Have 63Mm Male Instantaneous Inlet, Suitable For Use With 63 Mm Size Fire Fighting Hoses. H.P. Tested To 21 Kgf / Cm² For 2.5 Minutes. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 29 Supplying And Fixing Of Flexible Hose Made With 100% Polyester, Black Epdm Internal Rubber Lining With External Coat Of Synthetic Elastomer ( Is:636, Type-A ) 63 Mm Dia, 15 Mtr. Long Rrl Hose Pipe With Instanteneous Type 63 Mm Dia Ss-304Male And Female Couplings ( Is:903 ) Duly Bound And Riveted To Hose Pipes With Copper Rivets And Ss Wire Etc. As Required.Appropriate Test Certificate / Report With Liable Warranty Of Product / Accessories From Oem Shall Be Submitted. 30 Supplying And Fixing First -Aid Fire Hose Reel Drum Wall Mounted Swinging Type With Ms Construction Powder Painted In Post Office Red, Conforming To Is 884-1985 With Upto Date Amendments, Complete With The Following As Required. ( A ) Thermoplastic / Rubber Hose ( B ) 20 Mmdia Ul, Fm Bronze / Ss Nozzle With 5Mm Orifice ( C ) Drum And Brackets For Fixing The Equipments On Wall. ( D ) Connections From Riser With 20 / 25 Mm Dia Brass / Gm Gate Valves With Screwed End And Conforming To Is:778 Class-1Through Forged Steel Screwed Union & M.S. Pipe. Etc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 31 With 30 M X 20 Mm Thermoplastic Hose As Per Is:12585 Type-2 And Bursting Pressure 42 Kg / Sqcm 32 Providing & Fixing Stainless Steel Pressure Gauge With Dial Of 150 Mm Dia Size And Range 0 To 20 Kg / Sq.Cmwith 3 / 8 Bsp Bottom Entry , Ball Valve , Ss Syphon Tube All Fittings Etc, Dulycalibrated Before Installation In Mks And Fps Units, Accuracy Level + / - 1% Including Making Drilling In Existing Ms Pipeetc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 33 Sitc Of Ul 10Th Edition / En54 / Vds Certified Microprocessor Based Inteligent, Analogue Addressable, Modular, Expandable Networkableloop Fire Alarm Control Panel With Each Loop Capacity Of Min 125 Detectors Per Loop With Total Of 125 Detectors & Devices With Loop Length Up To 1 Km As Per Nfpa 72 Approval. The Panel Shall Be Able To Give Pin Point Location Of Addressable Units Via The Address Code For Each Unit. The Panel Shall Also Be Able To Automatically Switch Off All Control Switches When-Ever Any Alarm Is Triggered. . The Panel Shall Have 230 + 5 % Volts Power Supply, Automatic Battery Charger 24V, Sealed Lead Acid Maintanence Free Battries Sufficient For 24 Hours Normal Working And Then Be Capable Of Operating The System For 30 Minutes During Emergency Condtion. Loop Interface Cards, Communication Module, Lcd / Led Unit To Indicate Fire / Fault Signal Of Individual Unit, Inbuilt Networking Port ( Both Rs485&Ethernet ) , Serial Port For Printer, Two Supervisory Inputs, Two Position Key Switch And Usb Port For Programming.Including The Cost Of All Accessories Etc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 34 1 - Loop Panel 35 Sitc Of Pressure Switches Ofpressure Range 3 To 15 Bar For Main, Jockey, Terrace Pumpanddiesel Pumps, Etc. As Required ( Control Cable From Pressure Switch To Panel To Be Paid Extra ) . All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 36 Supplying And Fixing Of 750 Mm X 600 Mm X 250 Mm Outdoor Application Fire Hose Cabinet Made Of 1.6 Mm Thick Ms Sheetduly Powder Coated In Red Color Externally And White Internally With 6 Mm Thick Glazeddoors With Expanded Metal 2 Mm Thick Jali Including Necessary Locking Arrangement Suitable To Accommodate 2 Nos 15 Mtr. Long Rrl Hose And 1 No. Branch Pipe On Existing Wall / Angle Iron Frame As Required. ( Cost Of Ms Structure For Mounting Frame Is To Be Paid Extra ) All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 37 Providing And Fixing Of 15 Mm Dia Bronze Quartzoid Bulb Type Sprinkler Headswith Maximum Working Pressure 11.6 Kg / Sqcm And Suitable For 68 Degree Centigrade Rating Standard Response ( Ul Listed ) Chrome Plated Complete In All Respect Of The Following Type. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 38 Pendant / Upright Type 39 Sitc Of Ul 10Th Edition / En54 / Vds Certifiedautomatic Floating Sensitivity Type Analog Addressable Multi Criteria ( Two Optical / Smoke Sensor To Reduce False Alarm ) Detector With Mounting Base & Led Etc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 40 Sitc Of Ul 10Th Edition / En54 / Vds Certified Addessable Manual Call Point ( Mcp ) With Led / Fire Indication Etc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 41 Sitc Of Ul 10Th Edition / En54 / Vds Certified Addressable Sounder With Strobe Light, Loop Powered / Direct Powered From Facp With Sound Level 90 Db And Programmablefrom The Panel Etc. As Required. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 42 Supplying And Fixing Inlet Breeching Connection Of Ci Body With Gun Metal Male Instantaneous Inlet Couplings With Inbuilt Nrv, Drainage Connection With 50 Mm Brass Gate Valvecomplete With Pvc Blank Cap And Chain As Required For 150Mm Dia Outlet With 1 No. Matching Flange ( Minimum 16 Mm Thick ) , Nuts, Bolts, Washers, Gaskets, Etc As Required Of Following Ways. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 43 2 Way 44 Supplying And Drawing Fire Resistant Flexible / Stranded Bare Copper Conductor, Pvc / Xlpe Insulated, Overall Aluminium Mylar Tape Shielded Atc Drain Wire And Outer Pvc Sheathed Industrial Instrumentation ( Shielded ) Cables Voltage Grade 300 / 500 V As Per Bs / En 50288-7 In Existingsurface Or Recessed Pvc / Ms Conduit / Casing Capping / Cable Tray / Open Duct Making Connections, Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Cables. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 45 2 X 1.5 Sq.Mm Armoured With Outer Sheath In Red Color 46 Supply & Fixing Of Co2 Type Fire Extinguisher Conforming To Is:15683:2018, Charged With Co2 Gas ( Purity 99.7% Conforming To Is 15222 ) , Powder Coated Internal & External Surface Manganese Steel Isi Marked As Per Is 7285 Cylinder Body , Wheel Type Forged Brass Release Valve Isi Marked As Per Is 3224 With Inbuilt Safety Release Device ( ( Fusible Plug And Rupture Disc Type ) , 1.0 Mtr. Metal Wire Braided Hose Having Minimum Bursting Pressure Of 140 Kgf / Cm2, Horn With Metallic Thread Connection, Qr Code For Product Traceability, Including Fixing On Wall With Suitable Anchor Fasteners As Required Of Following Capacity. Test Certificates Of All The Parameters Along With Hydro Test & Burst Test ( For Cylinder Body ) Certificatefrom Oem / External Nabl Accrediated Lab Is To Be Submitted. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 47 Capacity 4.5 Kg. 48 Supply & Fixing Of Dry Powder Agent ( As Per Is 4308:2019 ) , Abc Typefire Extinguisher ( Stored Pressure Type ) Conforming To Is:15683:2018 , Powder Coated Internal & External Surface Deep Drawn Cylinder Body Of Mild Steel Cr2 Grade Conforming To Is: 513, Squeeze Grip Forged Brass Release Valve With Inbuilt Safety Release Device, Diaphragm Type, 0 To 28 Bar Range Pressure Gauge, 450 Mm Long Epdm Discharge Tube, Qr Code For Product Traceability Including Fixing On Wall With Suitable Anchor Fasteners As Required Of Following Capacity. Test Certificates Of All The Parameters Along With Hydro Test & Burst Test ( For Cylinder Body ) Certificatefrom Oem / External Nabl Accrediated Lab Is To Be Submitted. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 49 4 Kg 50 Supply & Fabrication Steel Structure With Ms Channel / Angle / Joist / Ismb / Sheet Etc. Including Welding, Rivetting, Cutting, Nut & Bolt , One Coat Of Primer & Two Coat Of Enamel Paint Etc. As Requiredcomplete In All Respect. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 51 S&F Following Sizes ( Dia. ) Of Isi Marked ( Is:9537 P - Ii ) Rigid Steel Conduit With Wall Thickness According To Is Specified Along Withisi Marked ( Is:14768 P-Ii 2003 ) Accessories Inrecessed Using Saddles, Clamps, Fasteners, Pvc Bushes, Check Nuts, As Required Includingcutting Jhiris In The Wall And Making Good The Same As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 52 25 Mm 53 Supply & Fixing Of Ceiling Mounted Ul Listed Clean Agent ( Hfc-236Fa ) , Modular Typefire Extinguisher , Powder Coated Internal & External Surface Deep Drawn Cylinder Body Of Mild Steel Cr2 Grade Conforming To Is: 513, Fixed Bulb With Temerature 68 Deg C, Qr Code For Product Traceability Including Fixing On Ceiling With Suitable Anchor Fasteners As Required Of Following Capacity. Test Certificates Of All The Parameters Along With Hydro Test & Burst Test ( For Cylinder Body ) Certificatefrom Oem / External Nabl Accrediated Lab Is To Be Submitted. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . 54 5 Kg Capacity
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
35.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
36.
Health and Family Welfare #10416328 Price Bid
Tender For supply of Ct Simulator , 4D Ct Simulator As Per The Specification Except The Following , One Set Of 3 External Static Laser System , Laser Qa Tool , Laser Printer Duplex A4 , Laser Printer Duplex A3 , Single Head Pressure Injector With 100 Syringes , Water Bath / Oven , Full System Ups , Lead Apron With Thyriod Gurad , Lead Glove , Gonad Shield , Additional Workstation As Per Spec (Not Taken For Evaluation) , Dry Imager (Not Taken For Evaluation) , 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , 15.12.1 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , 15.12.2Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead: Of Area Beyond 3 Sq. Metre , 15.23.1Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , 15.57 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge , 2.34.1Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% , 2.35.1.1Diluting And Injecting Chemical Emulsion For Post -Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion):Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Litres / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300Mm Including Excavation Channel Along The Wall & Rodding Etc. Complete: With Chlorpyriphos /Lindane E.C. 20% With 1% Concentration , 24.2Providing And Fixing Double Scaffolding System (Cup Lock Type ) On The Exterior Side Of Building/Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40 Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Chakkus, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: - ( 1) The Evaluational Area Of The Scaffolding Shall Be Measured For Payment Purpose, (2) The Payment Will Be Made Once Only For Execution Of All Items Of Such Works. , 15.60 Disposal Of Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved , 50.2.25.1 Filling With Contractors Own Earth ( Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M As Per Direction Of Site Engineer-In-Charge , 50.4.1.1 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size) Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing For Leveling Coarse Of Floor And Roof Etc. , 50.5.5Reinforced Cement Concrete Work In Arches, Archribs, Domes, Vaults, Shells, Folded Plate And Roof Having Slope More Than 15 Degree Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size). , 50.5.33.2 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Above Plinth Level Upto Floor V Level , 5.22.1 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelmild Steel And Medium Tensile Steel Bars , 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platform , 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil , 6.26.2Brick Work With Common Burnt Clay Selected F.P.S (Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand)Above Plinth Level And Upto Floor V Level , 50.6.1.2Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. , 50.6.1.8 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In: Cm 1:6 ( 1 Cement : 6 Coarse Sand Etc Complete , 50.6.3.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x10 Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level For 10 Cm Thick Wall In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Including Cost Of Scaffolding Complete , 13.1.1Cement Plaster12 Mmof Mix: 1:4 ( 1 Cement : 4 Fine Sand) , 13.7.1Cement Plaster 12 Mmfinished With A Floating Coat Of Neat Cement Of Mix: 1:3 ( 1 Cement : 3 Fine Sand) , 11.37Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600 X 600 Mm. , 11.41.3 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 800X 800 Mm , Od31976/2023_2024Providing And Fixing First Quality Vitrified Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 11.48.2 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg). Including Filling /Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , 11.48.3Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg). Including Filling /Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 800X800mm , 11.55.1 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , 50.9.1.1Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood , 50.9.2.1Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineerin - Charge. Using Anjili/ Jack Wood , 21.1.1.2 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately): For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 21.1.2.2 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides , Od31977/2023_2024 Supplying And Fixing Flush Door Shutter, Shutter Of Required Size, Thickness 30Mm Thick, Finished With 1 Mm Laminate Of Approved Shade With 9 X 16 Clear Glass Vision Panels As Per Design Including Necessary Hinges , Od31978/2023_2024 Frosted Film - Supply And Installation Of 3M Make Frosted Film Pattern Throughout All The Internal Glass Panels Wherever Required Of Approx. 1.5 M Height As Per The Approved Pattern. , Od31979/2023_2024 Providing And Fixing Extruded Section Body Tubular Type Universal Hydraulic Door Closer(Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete , Od31980/2023_2024 Providing And Fixing 4.00 Mm Thick Acp Sheet For Cupboard Including All Cost, Conveyance, Labour Charges Etc Complete , 21.3.1 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , 12.45.2 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/ Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board Conforming To Is; 2095-Part I , 12.54.1 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Soffit With Help Of Soffit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Sixe38x12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C/C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms/Sqm (Both Side Inclusive), Fixing With Clip In Tiles Into Spring T With :Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25 Mm Height, ,Made Of G.I Sheet Having Galvanizing Of 100 Gms/ Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending . , 12.58.1 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Sections (Galvanized @ 120 Grams/ Sqm, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Space Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening Of Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process To Give Stable Crystalline Structure With Minimum Compressive Strength 225 Kg/ Sq. Cm, Bending Strength 100 Kg/Sq. Cm, Of Size 595X595 Mm, Having Perforation Of Dia, 10 Mm With Minimum Perforated Area 18% With Non Woven Tissue On The Back Side, Having An Nrc (Noise Reduction Coefficient) Of 0.85, With 50 Mm Thick Rockwool Of 48 Kg/Cum Backing. , 21.4.2Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is: 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors, Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer -In- Charge.With Brass Cover Plate Minimum 1.25 Mm Thickness , 21.13 Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , 50.9.11.1Providing And Fixing Thomson Multi Wood Board Or Equivalent Make Paneling 12 Mm Thick, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately) As Per The Direction Of Site Engineer-In-Charge. , 50.9.12.1 Providing And Fixing Thomson Multi Wood Board Or Equivalent Make, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer (Fittings To Be Paid Separately) As Per The Direction Of Site Engineer-In-Charge. , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.69.1 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work , 13.80Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 13.83.2Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour.Two Coats , 13.47.1Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) , 10.16.3 Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Electric Resistance Or Induction Butt Welded Tubes , Od31981/2023_2024Roofing Sheet With Sandwich Puf Roof Panel With 0.40 Mm Or Nearest Size Pre Painted Galvalume Sheet At Top & Bottom , 30 Mm Or Nearest Size Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete , Od31982/2023_2024 Wall Cladding With Sandwich Puf Wall Panel With 0.40 Mm Or Nearest Pre Painted Galvalume Sheet At Top &Bottom , 30 Mm Or Nearest Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete. , Od31983/2023_2024 Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses. , 17.2.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , 17.7.1 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , 50.17.1.2 Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge , 50.17.1.5Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 50.17.1.1 Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 17.31 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Od33878/2023_2024 Supplying And Fixing Stainless Steel Mirror Finished H Type Handles Including Material Cost, Conveyance And Fixing Charges Etc Complete. , 50.18.7.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 15Mm Dia 12Kgf/Cm2 -Internal Work- Exposed On Wall , 50.18.7.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , 50.18.8.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer- In- Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 12 Kgf/ Cm2 , 50.18.8.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 32 Mm Pipe 10Kgf/Cm2 , 50.18.8.9.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 110 Mm Pipe 6Kgf/Cm2 , 50.18.9.8.2 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching And Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 4 Kgf/Cm2 , Od31984/2023_2024 Providing And Fixing 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Pvc Hollow Section Of Size 59 X 24 Mm And Wall Thickness 2 Mm With Inbuilt Edging On Both Sides. The Styles And Rails Mitered And Joint At The Corners By Means Of M.S. Galvanized/Plastic Brackets Of Size 75 X 220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Fixing Galvanized M.S. Tube Of Size 20 X 20 Mm And 1 Mm Wall Thickness. The Lock Rail Made Up Of H Section, A Pvc Hollow Section Of Size 100 X 24 Mm And 2 Mm Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanized M.S. U Cleats. The Shutter Frame Filled With A Pvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Fixing Horizontally 6 Mm Galvanized M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). , Od31985/2023_2024 Supplying And Fixing Name Board Of Various Sizes Using Foam Sheet Board Including Lettering As Per The Direction Of Departmental Officers Including Cost, Conveyance And Fixing Charges Etc Complete. 45X14cm Size , Od31986/2023_2024 Supplying And Fixing The Name Board Of Size 80 X 30 Using Acp Board With Acrylic Lettering Including Cost, Conveyance And Labour Charges For Lettering And Fixing Etc Complete , Od31987/2023_2024 Supplying And Fixing Inaugration Board Using Granite Slab Including Lettering As Per Direction Of Departmental Officers Including Cost Of Granite, Lettering And Fixing Charges Etc Complete. Size: 100X84cm , Supplying And Fixing Skylight Of Size 1.2Mx 1.8M With Designed Acrylic Sheet Including 4 Numbers Led Tube As Per The Direction Of Engineer In Charge , Od31989/2023_2024 Computer Chair The Medium Back Adjustable Revolving Chair Made With Mesh Back Within Built Handle In The Nylon Finish, The Back Is Designed Extra Lumber Support. The Seat Have Provided Seat Cover In Pp Made With 12Mm Hot Pressed Ply And Pu Moylded Foam. The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking. The Base And Pin Wheels Are Made In The Nylon. 120Mm H Gas Lift Should Be Provided With Tower Bellow , Od31990/2023_2024 High Back Chair Made With Feather Foam Seat & Mesh Back With Lumber Support. , The Gas Lift Mechanism Should Be Tested As Per Bifmastandards. The Pedestal Should Be Five Legged Injection Mouldedin Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, It Should Have Synchro Any Anglelocking Arrangement , Od31991/2023_2024Providing And Fixing Trap Doors For Access To The Areas Above False Ceiling. The Trap Door Shall Have An External Frame Made Of Powder Coated Aluminium Channel On Which The Shutter Is Hinged. Shutter Shall Be Made 3 Mm Thick Acp Sheet Shutter External Frame Of Shutter Made Of Powder Coated Aluminium Channel. Concealed Heavy Duty Hinges Shall Be Used To Mount The Shutters And Locking Shall Be Provided. The Shutter Shall Be Moulded In Level With The False Ceiling Forming A Groove All Around. Sufficient Number Of Hinges And Locks Shall Be Provided To Avoid Sagging Of The Shutter. Key Also Shall Be Supplied. No Extra Rate Shall Be Provided For Suspenders Or Frame Works All Round For Linking The Trap Door To Gyp Board /Any Other False Ceiling. The Rate Including All Labour Charges ,Material Charges Ect Complete. , Od33559/2023_2024 Supplying And Laying Polyster , Washable And Stainfree Cloth(Bio-Active Fabric Washable Germfree-Suitable For Icu Room) Curtain System With Maximum Curtain Cloth Height 230Cm (Top 30 Cm White Colour Net And 200Cm Light Blue Colour As Per Approval) Stitching With Stifiner Tape,Pleats,Ironing And Laying In Icu Room Around Each Bed Using Pvc Runner With Hooks&Stopper For Hanging/Sliding Etc. As Per The Direction Of Engineer In Charge Including Conveyance To Site , Laying In Line And Level , Sealing All Cuttings In False Ceiling With Powder Coated Ms Cup ,All Leads And Lifts Including All Labour Charges Etc. Complete.(Unpleated Length Of The Cloth Maesurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measuremnet)/Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube Hanging Support Of Required Length (App. Length 1.10M) One End Fixing From Slab By Using 6Mm Dia. Expansion Bolt At A Distance Not More Than 2 M, C/C Down End Fixed To Powder Coated Aluminium Channel Frame 45X20mm X1mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level ,Sealing All Gaps In False Ceiling Due To Hanging Supports ,All Leads And Lifts, Including All Labour Charges Etc. Complete. , Od33560/2023_2024 Providing And Fixing Vertical Blinds As Per The Direction Of Engineer In Charge , Furniture& Other Works: Lead Lined Door Shutters: 2Mm Lead Lined Door Shutterswithsolid Cored(30Mm) Lead(2Mm) Lined Flush Door Side Hung Two Rebated Shutters With Plywood(6Mm) & Laminated (1Mm) On Both Sides And All Accessories ( Ss Hinges (4 Nos), Tower Bolt , Ss Handles Etc..) , Lead Lined Door Frames: Lead(2Mm) Lined Flush Door Side Hung Single Shutter With Plywood(6Mm) &Laminated (1Mm) On Both Sides And All Accessories(Lead Sheet Should Overlap Door Frame & Wall )Includingproviding Wood Work In Frames Of Doors And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length , Using Good Quality Anjili Wood /Jack Wood (Frame Size 12 Cm X 8 Cm) , Wood Frame For Fixing Lead Glass (Lead Sheet Should Overlap Door Frame & Wall ) , Steel Cupboard (Godrej) For Storage 6Ft Tall 3 Feet Width , Providing And Fixing 2.0Mm Th. Vinyl Floor With Rubber Based Adhesive Over Clean And Smooth Surface Including Finishing By Rolling A Light Roller All Complete. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Wiring For Group Controlled (Looped) Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point ( Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. Group C , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X 2.5 Sq. Mm + 1 X 2.5Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required.4 X 6 Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq.Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required.3 X 2.5Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 4 Sq. Mmm , Supplying And Drawing Following Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor,Unarmored Telephone Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required.2 Pairs , Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25Mm , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable , Cat 6 Rj 45 Computer Jack Modular Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5/6 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 2 Way 5/6 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5/6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Telephone Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Tv Antenna Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 1 Or 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 6 Module (200Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 8 Module (125Mmx125mm) , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Extra For Fixing The Louvers/ Shutters Complete With Frame For An Exhaust Fan Of All Sizes , Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Color Washing Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep , Supply Of 300/305 Mm Sweep Light Duty Exhaust Fan In Metal Frame Working On230 Va/C , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required4 Way (8+12) - Three Phase Double Cover (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required6 Way (8+18) - Three Phase Double Cover (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way (8+12) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way (8 + 18) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) , Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface/ Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/ Rccb/Isolator)2+12 Way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , Supplying And Fixing Following Rating, Four Pole, (Three Phaseand Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Dbcomplete With Connections, Testing And Commissioning Etc. Asrequired. 63 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , Supplying And Fixing Following Rating, Three Pole, Mcb63 A Rating, 3 Pole, Mcb , Supplying And Fixing Following Rating, Three Pole, Mcb 40 A Rating, 3 Pole, Mcb , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required100 Amp, 30 Ka 4 Pole , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required125amp, 36Ka , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required. 16A -100A, 35/36 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm (Clamped With 25X3mm Ms Flat Clamp) , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 185 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 240 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 25 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 50 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 10 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 16 Sq Mm With Factory Made Clamp , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 70 Sq Mm , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armoured Aluminum Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 70 Sq Mm , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.225Mm Width X 50Mm Depth X 1.6Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etcas Required 225 Mm Width X50 Mm Depth X 1.6 Mm Thickness , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 50 Sqmm , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1/2X 70 Sq. Mm (38Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X 95 Sq. Mm (45Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X 185 Sq. Mm (57Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1/2X 240 Sq. Mm (62Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 10 Sq. Mm (25Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 16 Sq. Mm (28Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 25 Sq. Mm (28Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 50 Sq. Mm (35Mm) , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 16 Sq.M , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required.25 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required.10 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 50 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.25 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.16 Sq.M , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.10 Sqmm , Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required.25Sq - 95Sq Mm With 20 Mm Wide X 1.20 Mm Thick Clip , Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required. 4Sqmm-16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required2.65 Mm Copper Conductor (12 Swg) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required4.00 Mm Copper Conductor ( 8 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.2.65 Mm (12 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 3.15 Mm (10 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 4.00 Mm (8 Swg) , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal/ Coke And Salt As Required. , Supply And Clamping The Following Size Of Strips On Surface Of Wall/ Parapet/ Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Color Washing Etc. As Required (For Horizontal Run) 25 X 3 Mm Copper Strip , Supplying, Threading, Laying And Jointing Of The Following Sizes Of B Class Gi Pipe With All Required Accessories In Ground In Trench As Protective Covering To Earth Leads40mm Dia , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Meter Below Ground As Strip Earth Electrode, Including Connection/ Terminating With Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm) , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required2.00 Mm Copper Conductor ( 14 Swg) , Supply Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From Crca Sheet 0.5Mm Thickness With All Accessories And Lamps Directly On Wall And Giving Connections With 16/0.20 Mm 3 Core Pvc Insulated And Sheathed Round Copper Conductor Flex Wire Or Extending The Original Wiring And Giving Connections As Required 1200 Mm 1X20w Led Lamp With Box Type Fixture , Supply & Installation Of Light Fittings On Tw Round Block
Supply, Conveyance Installation Testing And Commissioning The Light Fittings Of Following Types Made Of Crca With 0.5Mm Thickness Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16/0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.1200Mm 1X20w Led Lamp With Box Type Fixture , Recess Mounted Led Luminaire With Full Diffuser Type Upto 36 W (Max), 2X2 Led, Cool White, 5700K, White Powder Coated Crca Housing, Wipro Crco10r038hp57gl1 Or Bajaj Bzrsql 36W Gzi Cw Or Equivalent , Frame For Fixing Recess Mounted Led 2X2 Ft Luminaire 608 Mm X 608 Mm , Recess Mounted Circular Led Retrofit Downlighter, 15W, Powder Coated White Finish, Bpslr 15W Wh Bajaj Or Equivalent , Supplying And Fixing Of 6 / 7 W Pin Type Led Bulb In The Existing Angle Batten Etc As Required (Philips, Wipro Or Similar Superior Make) , Sitc Of 400Mm Sweep Meduim Duty Wall Fans With Metallic Vanes (Make: M/S Almonard/ Crompton/Bajaj Or Equivalent) , Abc Powder Type Fire Extinguisher With Nabl Approval, Fights Class A, B, C And Electrically Started Fires. , Fire Extinguisher Carbon Di-Oxide Type With Nabl Approval , Charges For Dismantling The Existing Electrical Installations Complete Making Good The Damages Of The Wall And Conveying The Dismantled Materials To Store Etc As Required. , Numbering Of Ceiling Fan / Exhaust Fan/ Fluorescent Fittings As Required. , Copper Pipe With Superlon Insulation For Suction And Discharge , Pvc Drain Pipe With Proper Insulation , Weather Proof 3 Core Copper Wire For Indoor To Outdoor Connecting Cable (Size As Per The Requirement Of Ac Manufacturer) , Core Cutting Charges Including Making The Surface Finished With Plastering And Painting, Making Good And Finishing With Matching Surface After Housing Pipe Etc. , Supporting Stand For Fixing Outdoor Unit(Powder Coated) , 4 Kva Voltage Stabilizer Wall Mount Type With Time Delay, High& Low Voltage& Thermal Overload Protection, Input Voltage: 170-220V, Output Voltage : 200-240V, High Voltage Cut Off : 240V, Efficiency: >95%, Frequency : 50Hz, V Guard Vg 500 Or Equivalent , Supply, Conveyance Testing And Commissioning Of 2 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar/Lg(Dual Inverter Type)/Voltas/Mitsubishi Or Superior Superior Brands, Cooling Capacity 6000 Kw/Hr With Rotary/Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500/450, Led/Lcd Display , Supply, Conveyance Testing And Commissioning Of 1 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar/Lg(Dual Inverter Type)/Voltas/Mitsubishi Or Superior Brands, Cooling Capacity 3000 Kw/Hr With Rotary /Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500/450, Led/Lcd Display , Sitc Of 19 Mm Thick Nitrile Rubber For Under Deckinsulation , Charges For Cutting Holes Suitable For Accommodating The Supply Ducts Including Plastering, Color Washing Etc. As Required. , Outdoor Unit Stand With Ribbed Rubber Pads , Electrical Cabling Between Indoor And Outdoor Units, With Required Size Cables/Wires(Havells/Rr Kabel/V-Guard Frls Wires) , Supply, Installation, Testing And Commissioning Upvc Drain Pipe 6Kg/Sq.Cmof Suitable Dia Connecting The Drain Pan Of The Indoor Units To Nearest Drain Point, With 12Mm Thick Closed Cell Elastomeric Insulation As Per Specification , Motorized Volume Control Damper For Individual Operation Of Ductable Split Air Conditioners , Supply And Fixing Of Canvas Connection And Ribbed Rubber Pads As Vibration Isolators , Providing And Fixing Of Thermal Insulation Lining With 13Mm Thick Nitrile Rubber Closed Cell Type With Adhesive, On Supply Duct. , Providing And Fixing Of Acoustic Duct Lining With 10Mm Thick Nitrile Rubber Open Cell Type Inside The Ducts , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminum Continuous Grilles 150Mm High For Return Air As Per Spec , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminimum Continuous Grilles 150 Mm High For Supply Air With Aluminum Damper As Per Spec , Supply, Installation, Testing And Commissioning Of Volume Control Duct Damper Made Of Extruded Aluminum For Ducts/Collars To Be Provided With Suitable Links, Lebers And Quadrants For Manual Control Of Volume Of Air Flow And For Proper Balancing Of The Air Distribution In The Main Duct Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc., As Per Specifications. , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges ,Supports, Gi Rods , Anchor Bolts ,Gi Nuts And Bolts, Pvc/ Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof /Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 24G , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges ,Supports, Gi Rods , Anchor Bolts ,Gi Nuts And Bolts, Pvc/ Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof /Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 22G , Supply, Installation, Testing And Commissioning (Sitc) Of 8.75 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu/Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring(Max 3M From Isolator) And Control Cabling(Indoor To Outdoor),Thermostat Wiring, High-Low Pressure Cut Out,Suitable For Three Phase 440V Supply Etc Complete As Required , Supply And Providing Copper Earth Bus In The Panel Board , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale (0-200)A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp, Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh, Incomer 200A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos Out Goings 160 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos.The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specifications.Pn Busbar Chamber With Copper Busbar. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switch Gears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh Incomer 160A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 160A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 125A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos %Icu= 25Ka) - 2 Nos 63A Fp Mccb - 3 Nos The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification. , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A/400A, 50/55 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Suitable De- Humidifier Units : Extraction At Least 35 Litres/Day, Compresor : Rotary, Air Flow : At Least 220M3/Hr, Reputed Brand, Input 230Vac , Charges For Obtaining Electrical Inspectorates Approval Including Scheme Apporval And Final Approval And Regularizing With Kseb , 24-Port Gigabit Manageable Smart Network Switch With 2 Sfps. Rack Mountable , Patch Panel - 24-Port Patch Panel With Cable Tray. Rack Mountable , 4U Rack- Wall Mountable Including 4X 6Amp Power Distribution Box , Supply Of Branded 1Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 2Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 3Mtr Patch Cords With Cat 6 Cable. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalised, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Busbars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale. (0-200)A Class 1 With 90 Deg Defl. Scale Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp Digital Multifunction Meter To Read V,A.Hz,Pf,Kwh Surge Protection Device (Type1+2) Incomer 400A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 200A Copper Tpn Busbar Chamber With Copper Busbar Out Goings 250A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 160A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 100 A Fp Mccb Isolator-2Nos 63 A Fp Mccb Isolator-2Nos The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification (Not Taken For Evaluation) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale. (0-200)A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp, Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh Incomer 250A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 250A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 200 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos. 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos. 63 A Fp Molded Case Circuit Breaker - 2 Nos.The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification (Not Taken For Evaluation) , Supply, Installation, Testing And Commissioning (Sitc) Of 11 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu/Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring(Max 3M From Isolator) And Control Cabling(Indoor To Outdoor),Thermostat Wiring, High-Low Pressure Cut Out,Suitable For Three Phase 440V Supply Etc Complete As Required (Not Taken For Evaluation)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
37.
Heavy Industries and Public Enterprises #10390733 AOC
Vertical Extension & Other Development Works at Academic Block Annex-2 Palayad Campus, Kannur University, Kannur, Kerala under PM-USHA scheme- 1 Civil work -General Structural work 2 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness 3 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter 4 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 5 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar 6 Core Cutting of RCC slabs(12cm Maxi.thickness) by using mechanical core cutting equipment of required diameter of the pipe in full depth etc to the satisfaction of engineer in charge including all cost and conveyance materials and labours charge etc complete (dia 80-200mm) 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 8 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. 9 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 10 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock 11 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 13 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 14 Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 15 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level 16 Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). 17 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 18 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 19 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 20 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 21 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 22 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges 23 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. 24 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 25 Block work & Finishing Work 26 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 27 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 28 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) 29 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 30 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 32 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats 33 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 35 Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. 36 Teracotta Clay Jali work, For Building work, minimum 7.5 cm thick as per approved design and pattern of Engineer in charge in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) with neat finish, polishing work all complete. 37 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wallwith suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channelof 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG),plaster board conforming to IS : 2095 : (part 3) 1996 (Board with BIS Certification marks) 38 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 39 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 40 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides 41 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness 42 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 43 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge. 44 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm 45 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 46 Joinery 47 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 48 Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge. 49 Providing and fixing factory made uPVC white colour casement/casement cum fixedglazedwindowscomprisingofuPVCmulti-chamberedframe,sashand mullion(whereeverrequired)extrudedprofilesduly reinforcedwith1.60+/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension,EPDMgasket,stainlesssteel(SS304grade)friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mmsizeforfixingframetofinishedwall,plasticpackers,plasticcapsand necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). 50 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness 51 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood 52 Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood 53 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc 54 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 55 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm 56 Providing and fixing CP Brass Handle 450mm in all types of doors with the necessary fittings and arrangements all complete. 57 Providingand fixing chromium plated brass handles with necessary screws etc. complete:200 mm 58 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality, with necessary screws etc complete as per direction of Engineer- in- charge. 59 French spirit polishing:Two or more coats on new works including a coat of wood filler 60 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece 61 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1800X2250 mm. 62 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1000X2200 mm. 63 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) 64 Providing and fixing SS H handle having min 45 cm length in toughed glass door including all necessary screws etc. complete. 65 Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete 66 Fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in- charge. 67 Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self- adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge. 68 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 69 Providing and fixing ball bearing for rolling shutters. 70 Sanitary and CP Fittings 71 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 72 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid 73 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 74 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 75 Providing and fixing ceramic urinal partitions of standard size as per direction of Engineer-in Charge and of approved shade 76 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 77 Providing and fixing uplasticised PVC connectionpipe with brass unions: 30 cm length15 mm nominal bore 78 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter 79 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore 80 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm 82 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm 83 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge. 84 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 85 Flexible pipe32 mm dia 86 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with C.P. brass screws and washers complete. 87 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 88 Providing and fixing SS grating of approved quality and colour. Rectangular type with openable lid150 mm nominal size square 100 mm diameter of the inner hinged grating. 89 Providing and fixing disabled friendly bathroom kit with all accessories including wash closet with soft close seat cover and cistern with twin flush setting, wash basin of min dimensions 510mm x 400mm with all necessary fittings including Angle cock, Connection pipe, waste pipe, Spatula Lever basin mixer, Wall mounted 600mm long, Wall mounted grab bar 600 mm long and wall mounted hinged rail 750 x 750, Health Faucet with angle cock. Recommended Makes : CERA , Hindware, Jaguar or equivalent . 90 Plumbing 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall32 mm nominal outer dia pipes 92 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall40 mm nominal outer dia pipes 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall50 mm nominal outer dia pipes 94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes 95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes 96 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore 97 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore 98 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore 99 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 100 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall 101 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall 102 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall 103 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow 104 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee 105 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer 106 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 107 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 108 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 109 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall 110 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend 111 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee 112 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl 113 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap 114 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow 115 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall 116 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 117 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee 118 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl 119 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap 120 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 121 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer 122 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore 123 Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 124 Yard Plumbing 125 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 126 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling 127 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 128 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single pushfit Coupler110 mm 129 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.50110 mm bend 130 Tile and Granite work 131 Providing and laying Matt Finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1200 x 600 mm. 132 Providing and laying Matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1200x600 mm 133 Providing and laying Anti Skid matt vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 134 Providing and laying premium vitrified bathroom wall tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 135 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm 136 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately).Area of slab over 0.50 sqm 137 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade. Area of slab over 0.50 sqm 138 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 139 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 140 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 141 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 142 Providing and fixing 12 mm thick gang saw cut, mat /rough finished granite, machine cut for steps, ramps or inclined plate form with raking and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 143 Structural steel 144 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 145 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 146 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 147 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 148 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 149 False ceiling 150 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board 151 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. 152 Rainwater Harvesting ,Fire Tank,Septic Tank 153 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock 154 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock 155 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 156 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 157 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level 158 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 159 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm 160 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. 161 Supplying and fixing C.I with frame for manholes: 600mm x 600mm ( heavy duty) the weight of the cover and frame shall not be less than 208 kg 162 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 163 Providing and placing on terrace (at all floor levels) Stainless Steel 304as per IS 5522:1992 of capacity 5000 Litreswith suitable fixing arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 164 Providing and fixing of Fire Rated door 1200x2100mm- Hollow metal fire doors at all levels from ISO 9001-2015 certified Manufacturer. Fire door should be as per NFPA 80 and NFPA 252. All fire doors should be tested at UL for 120 minutes and should pass both UL10B and UL10C. Doors shall be made from pressed galvanized steel confirming to IS277 as per following specification.Frame:Door frame shall be single rebate grooved profile of size 125 x 55 mm made out of 1.6 mm (16 gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate ANSI UL labeled hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant.Shutter: Door leaf shall be 46 mm thick fully flush double skin door without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet.The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI standard. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.Door and frames shall be finished Pure Polyester Powder coated and shall have passed minimum 500 hours of salt spray test.Vision glass: The glass shall be 5mm clear fire rated glass of equal rating and not exceeding size of 114 sq. inches.Door Hardware: Stainless steel Ball bearing Hinges 3 Nos, Minimum 90Kg hydraulic surface applied rack and pinion door closers, Mortice Sash Lock with cylinder. One Side Handle and Other Side with 2 point Panic Bar. 165 Road Work 166 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 167 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 168 Water proofing 169 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 170 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) 171 Landscaping 172 Supplying of Flowering Shrubs (Heliconiya st. Vincent red, Ixora bush, Cana durf etc..) 173 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removalof unsaverieable material?s as per direction of officer in charge (including cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) 174 Providing and Laying Landscaping of outdoor area with buffalo grass and small plants with all necessary levelling and filling as required. 175 Signage 176 Providing and fixing in position the signage board made out of 3 mm opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyl painted foam board of required size and colour. 177 Providing and fixing non lit Signages made of CNC Cut Stainless Steel projected letters and fixing it at site with all necessary fitting arrangements and accessories as per the design and requirement on instructions of the engineer in charge. 178 Furniture 179 Two tiered reagent racks (MS with powder coating) with granite top of 150 mm depth for side workbenches. The two tier should be placed at a minimum spacing of 300 mm. The item should be in compliance with IS 4209 (2013), NABL etc. The Length should be customized as per lab workbench and vertical posts must be placed at appropriate spacing. 180 Supply and Installation of Sink Module with SinkEach sink module should have a minimum dimension of 900 mm (L) x 900 mm (W) x 900 mm (H) and made of MS as per IS 1730 shall be designed with a single cabinet (with 2 shutter, SS304 hinges for easy and noiseless opening and closing mechanism). This module should include a sink made of 5 mm thick polypropylene with black color body. Minimum Dimension of the sink: 450 mm (L) x 600 mm (W). Sink should include PVC tap connection-15mm diameter (Goose neck type), grating etc. The sink module shall be portable and provided with 18mm thick granite table top (with cut out for providing sink). Item to be inclusive of all necessary fitting arrangement.The item should be in compliance with IS 4209 (2013), NABL, WHO etc. 181 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 750 mm D 182 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 890mm D 183 Supply, Installation, Testing and Commissioning of Eye wash with Brass inject mould with epoxy powder coated body with auto released Valve and cup shaped water dispenser with min 1/2 HP power pressure booster pump 184 Counter Height Stools :Supply and erection of counter height stools ( bar stools ) of following specifications : Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion. Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. 185 Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm) 186 Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 187 Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 188 Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick Multi wood board with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate: Greenlam/ Merino / Century. Only front elevation will be measured. 189 Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape. 190 Table of size Min 2300x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour. 191 Supply of wooden table with one drawer and Cupboard unit made of hard wood varnishing/painting all complete. Size: 1200x600x750mm 192 Providing & supply of Conference Table with executive chair of 13 Pax with the following specifications.Table top size :3600 x 1200mm. Table Tops –made of 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics & long lasting use. Under structure – Legs made of 25 mm thick standard Black matt colour post formed panels interconnected with 18mm thick standard Black matt colour pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management & Concealed wire management to take care of basic wiring requirements both horizontally & vertically. For closed configurations, liftable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager, popup grommet with power & RJ45 Socket. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs. 13 Nos Revolving adjustable type Medium height Back Office Chair with arm rest with back tilt and swivel mechanism constructed out of mild steel and high quality plastic. 193 Supply of wooded Chairs with armrest of Hard Wood Plank Seat and Reaper Back. 194 Supply of Wooden Bench and Desk made up of Mahagani of minimum size - Bench Size :1 83x30X46cm Desk Size :183x41x75 cm 195 Supply and installation of steel podium made of SS304 with min dimensions 500mm X 450 mm X 1200mm and having a sloped top surface, and having a decorative/ plain front face all made of SS 304 as per the design and approvals of the architect/ Engineer - In - Charge 196 Wiring-General Electrical work 197 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 198 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 199 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 200 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 201 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 202 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 203 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 204 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 205 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 206 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 207 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 208 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 209 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 210 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm 211 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm 212 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair 213 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 214 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 215 Fixtures 216 Supply and Fixing suitable size modular GI box with cover in front on and providing and fixing 1 no RJ 45 including connections as required. 217 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 218 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 219 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet 220 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 221 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet 222 Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI > 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro or equivalent 223 Supply, conveyance and Installation of compact, 2 feet,10-15W,LED tube light with high lumen giving soft glare free light including all required mounting accessories, frames complete. (Philips/WIPRO/Havells or equivalent) 224 Supply, Installation of surface mounted LED Tubelight. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 30 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 25k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make - Philips, Crompton, Wipro, Havells 225 Supply, Installation of surface/recess mounted LED Round/Square luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 110 lumen/watt and Minimum system wattage of 10 -15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro 226 Supply, conveyance and Installation of compact 10-15W LED Bulkhead Light giving soft glare free, Cool White light & complete with electronic driver including all required mounting accessories, frames, complete ( Make: Philips/WIPRO/Havells or equivalent) 227 Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 228 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 229 Supplying, conveyance and Installation of 150-250 mm sweep,1350 rpm, 3 - 5 blade BLDC Exhaust Fan including frames and all mounting accessories complete.Recommended Make: Atomberg Efficio/Crompton Brisk Air 230 Supplying, conveyance and Installation of BLDC Type Wall Fan having 3 blade, 400 mm sweep, Speed 1350 rpm, Air Delivery 70 CMM minimum, Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Renesa/V-Guard ENVIRO WF BLDC/Havells Platina 231 Supply, Installation, Testing and Commissioning of 450 mm sweep, 900 rpm heavy duty exhaust fan with louver in existing opening including making good the hole to suite the size of above fan complete with connections using 3 core 1.5sqmm multi core pvc sheathed copper conductor cable etc as required. 232 SITC of skirting light fitting with white LED 3 module along with suitable size modular metal box with inner and outer plates with all accessories. 233 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 234 Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. lCD 235 Supply and installation of 2 Nos. 4 ft MS powder-coated hanging rods for tube lights, including supply and laying of 1.5 sqmm copper PVC insulated FRLS wire (3 runs: Phase, Neutral, Earth), necessary hardware (ceiling clamps, saddles, junction box, connectors), complete mounting, terminations, testing, and labour charges — complete in all respects. 236 Network and CCTV System 237 Supply of 16 ports Network Switch, Rack-mountable 10/100/1000 Mbps, Switching capacity 35.7 Mbps Features: Flow control, Layer 2 switching, auto-negotiation, auto- uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, Quality of Service (QoS) Power: AC 120/230 V (50/60 Hz) complete. Make D-Link/TP Link/Cisco or equivalent 238 Supply Installation Testing and Commissioning of 32 channel embedded Linux NVR (Network Video Recorder), must connect 32 channel IP cameras, Should support min 2 SATA HDD and each should support Min 2TB and must record video simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smart Event, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(HEVC)/H.264+/H.264, 2 Year Warranty, Image quality should be maintained throughout the warranty period. Make: CP Plus/Hikivision/Dahua or equivalent 239 Network Switch for CCTV. 16 Port PoE Switch 1000BASE-T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 16 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az) Make: CP Plus/Netgear or equivalent 240 Supply, Conveyance and Installing of 2MP IP Dome/Bullet Camera having Progressive Scan True Day and Night Colour IR Camera having effective pixel of 2 MP, Video frame rate of 2MP @30FPS, Minimum illumination of 0.01 [email protected], 0 lux@IR On, 20 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell or equivalent 241 Supply and fixing of 6U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete 242 Supply Installation Testing & Commissioning of 16 Port Loaded Cat 6 - U/UTP Modular Toolless Patch Panel having a metal structure enabling them to be durably fixed to the uprights of the 19 chassis. Include rear cable manager to hold cables without need for cable ties. The termination of I/0s shall be without any manual crimping tools. 243 Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete. 244 Supply and connecting 2 meter long CAT6 cable Patch cord having RJ45 connectors crimped at both ends, to the existing outlets as required. Make: D-Link/TP-Link or equivalent 245 Supply and Installation of LED Color display of minimum 32 inch screen, complete, UHD display Make: LG/Samsung/Panasonic or equivalent. 246 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 247 Supply, Installation and Integration of Dual Band WiFi Access Point on false ceiling along with accessories, having Fast Wireless Speed, simultaneous 2.4GHz 300Mbps and 5GHz, 867Mbps Dual Band connections for 1.2Gbps of total available bandwidth, Superior Coverage of Four Fixed External antennas provide stable wireless connections and optimal coverage, App Control, Interface of 1× 10/100 Mbps WAN Port and 4× 10/100 Mbps LAN Ports having Working Modes (Router Mode / Access Point Mode). Make: TP-Link/Netgear/DLink or equivalent 248 UPS 249 Supply, Installation, Testing and Commissioning of True on-line Double Conversion 10 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase – Three Phase with ground b)Voltage range 190 VAC – 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range – 200VAC – 240 VAC ) Frequency range – 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range – 200VAC – 240 VAC i)Frequency range – 50/60 Hz j)Voltage distortion – linear load <= 2% k)Voltage distortion – nonlinear load <= 5% l)Output waveform – pure sinewave m) Crest Factor – 3:1 Minimum Back up time : Continuous 30 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation &Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand 250 Cable Trays 251 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness 252 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness 253 Fan Clamp 254 Providing and fixing 16 mm S.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 255 DB and Switchgear 256 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 257 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 258 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 259 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 260 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 261 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 262 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 263 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 264 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 265 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 266 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 267 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 268 Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts C curve TP MCB complete with connections, testing and commissioning etc. as required. 269 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 270 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral 271 Earthing and Lightning Arrestor 272 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required. 273 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 274 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 275 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 276 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 277 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 278 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 279 Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 280 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 281 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 282 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 283 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 284 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) 285 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) 286 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) 287 Street Lights 288 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 289 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 290 Water Purifier 291 Supply and Installation of Water Purifier having Multi-Stage Filtration: RO (Reverse Osmosis), UV (Ultraviolet), UF (Ultrafiltration), Storage Capacity: 7-9 Liters, Purification Features: RO: Removes dissolved impurities, heavy metals, and salts.UV: Kills bacteria, viruses, and other microorganisms. UF: Filters out fine particles and microorganisms. Mineral Booster: Adds essential minerals to enhance water taste.TDS Controller: Adjusts Total Dissolved Solids for taste preference. ActiveCopper: Infuses copper ions into the water for added health benefits.Aqua Taste Booster: Enhances the taste and maintains optimum pH level. In-Tank UV Disinfection: Keeps stored water pure.Smart Display/Indicators: Alerts for filter change, UV fail, water level, and service needs. Super Fine Sediment Filter: Removes fine and coarse particulate impurities. Water Level Indicator: Monitors the purified water level in the storage tank. Make: Aquaguard Aura 7L/ Bluestar Aristo 7L/Kent Grand Plus ZWW 9-Litre/ LG 8L 292 LT Cabling and Termination 293 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 294 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 295 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp 296 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 297 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 298 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm 299 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) 300 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm 301 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm) 302 LT Panels 303 Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work. General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall befl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 400A 3kA 4 Pole MCCB - 1no Ics = 100% Icu rating Digital Voltmeter 0- 500V with selector switch & Digital ammeter (0-400A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 400A. Out going : 250A ,50kA 4 Pole MCCB - 2no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 304 Lift panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 40A ,16-25kA TP MCB - 6 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list.Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 305 Sub Panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required. Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch &Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 32A ,16-25kA 4 Pole MCCB - 4 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 306 SSB2- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 250A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-250A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 250A. Out going : 1) 63A ,16-25kA 4 Pole MCCB - 8 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 307 Transformer 308 Supply , Installation, Testing and commissioning of 500 kVA outdoor unitized substation with an 11kV/433V dry-type cast resin transformer and a 630A VCB typically includes a compact prefabricated design conforming to IEC62271-202 standards, offering IP53/IP23 protection, and featuring compartmentalized construction to prevent accidental entry into energized areas. The substation is designed to withstand electrical impulses, thermal, and dynamic stresses, ensuring reliable and robust performance with low power loss and noise levels. The installation involves placing the substation on a prepared concrete plinth, connecting high-tension (HT) and low-tension (LT) cables, and ensuring proper earthing and safety measures. The commissioning process includes testing the transformer, switchgear, and protection systems to verify operational integrity. Make: Unipower/Intrans/Voltamp 309 MSB and APFC Panel 310 Supplying, installation, testing & commissioning of cubical type MAIN SWITCH BOARD suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area 6 sq.mtr (Approx.) fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630 Amp capacity extensible type TPN aluminium alloy bus bars of height conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :- Interlocking:Electrical through advance contacts in MCCB/ ACB’s (incomers & bus couplers) and mechanical (castel key) interlocking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section.Interlocking b(I) Incoming : 2 Nos 800 Amps (DG and MAINS) each four pole ACB of fault breaking capacity 50 KA (Ics=Icu upto 433 V manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993 as amended up-to-date complete with following accessories for each MCCB(a) Independent manual spring closing mechanism- 1 No.(b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection- 1 set.(c) Digital* type Voltmeter (0-500 V), with selector switch & back up HRC fuses/MCBs-1 set. (d) Digital* type Ammeter (0-.600 Amp), with selector switch and one set of 3 nos. CT’s of ratio. 800/5A Class I accuracy and 15 VA burden- 1set. (Ratio to be fi lled up).(e) 3 Nos. Phase indication LED lamps with 2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.(f) Shunt trip coil 220 V A.C. (II) Bus Bars :TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec (II) Outgoing :(1) (a) 4 Nos. 250 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 250/5 Amps Nos. (c) Digital* type ammeter (0- 400 Ap) with selector switch set. (2) (a) 1 Nos. 200 Amp4 Pole MCCB for (Ics = 35 kA upto 433 V) (b) CT’s of ratio 200/5 Amps set (c) Digital* type ammeter (0- 250 Amp) with selector switch set. (3) 3 Nos 160 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 160/5 Amps set (c) Digital* type ammeter (0- 200 Amp) with selector switch set. The switchgears/measuring instruments shall be as per the Choice of the Engineer in charge. The panel shall be mounted on required structural steel supports and frames for mounting, the price quoted shall be inclusive of the same. The panel shall have suitable provision for connecting to the incoming cables of 3R x 400 sqmm XLPE Aluminium cables and shall be provided with necessary earth leakage relays as per the Inspectorate Norms. The panel shall be as per the IS standards and shall conform to all norms of EB/Inspectorate/CEA. Make of Switchgear : ABB/L & T/Schneider Electric/Siemens/Legrand 311 Design, Manufacture, Supply, Installation, Testing and Commissioning of Automatic Power correction Panel having Incomer: 250A, TPN MCCB, Digital Multifunction meter for V,A,F,PF With CTs CL:1 with RYB Indication lamps-1 Set 250A Aluminium bus bar with heat shrinkable insulation sleeves-1 set, Intelligent power factor controller with control MCBs etc. complete The panel shall comprise of suitable combination of capacitor banks upto a total of 100 kVAR and shall be designed as per the standards of Electrical Inspectorate/CEA. 312 DG and AMF Panel 313 Supply, Installing, Testing and Commissioning of & Silent Type& Diesel Generating set having CPCB IV+ acoustic enclosure having Prime Power Rating of 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel engine radiator cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display and necessary indication coupled to Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor. Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Daily service fuel tank of 440-460 litres capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (lead acid type) as required as per specifications. Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. 314 Design, Fabricating, Supply, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 500 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: (a) 1 Nos. 630 Amp., 50 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50-100% having adjustable OL & SC. Set at 350A (b) Auto/Manual/Test/Off selector switch (c) 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay. (d) 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering(e) Energy analyser unit to indicate current voltage frequency power factor and KWH(f) Indicating lamps for load on mains and load on set(g) Fuse for instruments(h) Battery charger, complete with transformer/ rectifi er, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.(i) Main supply failure monitor(j) Supply failure timer(k) Restoration timer(l) Control unit with three impulse automatic engine start/stop and failure to start lockout.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator(o) Audio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load/maximum load warning. AMF Panel shall be connected to Main Switch Board incomer with necessary interlocking arrangement to prevent simultaneous switching on of power supplies. All integration between Main Switchboard and AMF Panel is under contractor scope. 315 HT Cable 316 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 300 sq mm 317 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm 318 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm 319 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm 320 Air Conditioning Works 321 Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1 dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE 322 Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through 100mm PVC duct inside false ceiling. 323 Electrical Dismantling Works 324 Dismantling of existing outdoor transformer and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 325 Dismantling of existing DG set 100 kVA, AMF panel etc and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 326 Electrical Works- Fire 327 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm 328 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 329 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 330 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 331 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) 332 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) 333 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm) 334 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 335 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 336 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 337 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 338 First Aid Hose reel &Wet Riser system 339 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m 340 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 341 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe 342 Supply and fixing of Air release valve SS body of 25 mm dia (UL Listed). 343 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 344 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 345 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) 346 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) 347 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel 348 Hose Box - Supply, Installation, Testing and Commissioning of Hose Box -Double door - (cabinet) to accommodate Two pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of MS sheet, painted in approved red colour with glass fronted hinged doors and lock &key (UL Listed). 349 Supply and Installation of Fire Brigade Draw-out Collecting head of CI Body having gunmetal 63mm dia instantaneous male draw out confirming to IS:903 suitable to fit on 100mm dia pipe with necessary flanges, rubber gasket, nut & bolts and other items. 350 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 351 Fire extinguishers 352 Supply &installation of ISI ABC type fire extinguisher of 4 kgs. Make SAFEX/ MINIMAX / CEASEFIRE or equivalent(UL Listed) 353 Supply &installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 354 Supply & installation of water mist type fire extinguisher of 9 liters. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 355 Supplying & Installing of Clean agent based automatic modular fire extinguisher (ceiling mounted) suitable for A,B,C class fires & electrical fires, Capacity- 5Kg 356 Supplying & Installing of Mechanical Foam (Stored Pressure) Type fire extinguisher of 9L capacity with mounting clamp. ISI approved. Make : SAFEX/MINIMAX/CEASEFIRE or equivalent 357 Fire Pumps & Fire Panel 358 Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head 359 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 360 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)a.Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325.c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head 361 Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROLControl for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 362 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 150mm 363 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 80mm 364 Supply and Installation of 12V DC, 200Ah maintenace free battery suitable for Diesel Engine driven fire pump operation with required connect cable set, battery stand. 365 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 100mm 366 Signages 367 Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Staircase/FIRE/Fire Station/Fire Fighting Equipment/Fire Duct/ Fire Extinguisher/ Floor/Fire Command Centre/Fire Pump Room/ No Smoking / Danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ In case of the fire do not use lift, use stairs and other mandatory signages recommended by Fire Departments having dimension 30 cm x 15 cm complete inculding fixing mechanism. 368 Supplying and Installing in position the signages approved by Kerala state fire service - of minimum size 1ft x 1.5ft made out of PVC rigid sheet 3mm thick with computer cut PVC non- reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with mirror screws. with lettering- ASSEMBLY AREA 369 Signboards: Supply and Installation of Fire Escape Plan with fire fighting equipment location, exit in A3 Foam sheet with plastic lamination with necessory accessories to fix it on wall. 370 Supply and fixing in position & Fire Order& signage in suitable size made of high quality PVC foam sheet with photo luminescent lamination to make it glow automatically in the dark, with suitable arrangement to fix it on wall. 371 Supplying & fixing in position Assembly Point sigange in suitable size on aluminium composite panel with suitable stand to fix it on open area outside building. Assembly Point 372 Terrace pump 373 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head 374 Design, Supply, Installation, Testing, and Commissioning of an Automatic Terrace Fire Pump Panel, including:- IP54-rated enclosure with powder-coated CRCA sheet steel.- 32A 16kA MCCB, 15 HP-rated pump 3P contactor, overload relay, and pressure switch for automatic pump operation.- Auto/Manual selector switch, START/STOP push buttons, hooter, timer, and protection features (dry-run, phase failure, etc.).- Indicators (Power ON, Pump Running, Fault, Low Pressure), meters (Voltmeter, Ammeter with selector switches).- Copper wiring, termination, and provision for cable glands.- Installation, onsite calibration, and full functional testing for pressure-based automation. 375 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 376 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 377 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 378 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 379 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm dia 380 Pressure Guage-Supply, Installation, Testing and Commissioning of pressure guage, 4 & dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 381 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations (UL Listed).20 mm dia Make : Kartar/ Atom 382 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 383 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 384 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 385 Above Ground Piping 386 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia 387 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia 388 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia 389 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :250 mm dia (wall thickness 6.3 mm) 390 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia 391 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :200 mm dia (wall thickness 6.3 mm) 392 Supply and Installation of 80mm dia M.S. &C& Class Diesel Engine exhaust pipe duly insulated with 50mm thick Glass wool with 1mm thick aluminium sheet cladding with bellows, flexible joint, necessary support, making hole in brick wall for pipe installation.Pipe dia 80mm 393 Underground piping 394 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 150 mm. Make - TATA / JINDAL 395 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 200 mm. Make - TATA / JINDAL 396 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (1m below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 100 mm. Make - TATA / JINDAL 397 Valves, measuring devices & switches 398 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:200mm dia 399 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia 400 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 401 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia 402 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia 403 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia 404 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150mm dia 405 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 406 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 407 Pressure Gauge-Supply, Installation, Testing and Commissioning of pressure gauge, 4 dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 408 Supply and fixing of Air release valve Brass body of 25 mm dia (UL Listed) following IS standards, with required pressure rated. 409 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 410 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 411 MOEFA system, Automatic Detection & Fire Alarm System 412 Supplying, installing, testing and commissioning approved make Microprocessor based Multi-loop, Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 trouble events including1000 alarm log history events, Self Programmable alphanumeric keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 Loops. Each loop shall have a capacity of minimum 125 detectors & 125 other devices exculding 20% spare. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable of connecting to the cloud platform/solution. Complied to meet UL864, 10th Edition 6 Loop Networkable Addressable Fire Alarm Control Panel(Make: Honeywell or Equivalent) 413 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 414 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 415 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 416 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 417 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 418 Supplying, Installation, testing & commissioning of external power supply unit provides regulated and filtered 24 VDC power for hooter operation.Battery backup with built in charging. 419 CABLING & WIRING Supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 420 Miscellaneous 421 Preparation of initial and final drawings, submission to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval, sanction and No Objection Certificate for building permit and completion from Fire Department and other department. Quoted rate shall be excluding statutory fee (All statutory fees shall be borne by Client-actual statutory fees shall be reimbursed on submission of original bill/challans from authorities).
Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore
Boards / Undertakings / PSU No of Bidders 1
Kerala View Result →
38.
Defence #10365851 Price Bid
Tender For 1St Dry Dock Repair And Maintenance Of Mechanized Boat Ravi; 1 DECK SIDE/ HULL SIDE: - A. Parts to be replaced :-All zinc anodes of hull are required to be replaced with new one and Zink Anode bolts of both main engines to be replaced. (1 Job) 2 Keel protecting plate screw at front portion to be replaced & keel protecting plate make serviceable. (1 NO) 3 01 set sea chest non returning valves required to be replaced. (1 SET) 4 All defective side ‘D’ fenders to be replaced. (1 Job) 5 All side portable pneumatic fenders to be replaced. (04 Nos) 6 All railing to be check, defective and damaged portion to be replaced. (1 Job) 7 Canopy cover required new in heavy duty and canopy SS frame repaired. (1 Job) 8 Required canopy cover in all lights. (1 Job) 9 B. Services to be carried out :- In side passenger cabin and pilot house side wall required lamination and FRP work. (1 Job) 10 All FRP body including hull to be check and defective portion required to be repaired. (1 Job) 11 Rubber packing of Hatch cover of engine room, wheel house, crew cabin and front deck required to be replaced. (1 Job) 12 ANCHORING SYSTEM A. Parts required to be replaced :-35 Mtr SS anchor chain 10 mm dia to be provided. (1 No) 13 30 Kgs grapnel anchor with P.P. rope approximate 19 mm x 120 feet to be provided (1 No) 14 Anchor winch and lifting motor required to be replaced. (1 no) 15 CABINParts required to be replaced :-Pilot, passenger seat with back rest and hand rest foam & Rexene to be Replaced. (1 set) 16 Floor mat required completely replaced in crew cabin (1 Job) 17 Crew cabin mattress with cover, 04 bed sheets, Pillow with cover required to be provided. (1 Job) 18 WINDOW CURTAIN A. Parts required to be replacedAll side window glasses curtain required new fitting with holder. (1 Set) 19 WIPERA. Parts required to be replaced :-Window Wiper motor along with blades and holder (arms) to be replaced (1 Set) 20 Window Wiper water spray system to be check and defective item to be replaced. (1 Set) 21 Main Engine Make and Types- 2 x Cummins, QSB 6.7 4801D1 Ref No QSB6.7 4801NT, Power: 473 HP 3000 RPM. Both the Main Engine with complete Accessories required complete overhauling and servicing / calibration with OEM genuine spares from OEM/Authorised dealer. (for Both engine)Engine Srl No. 74135449 (Stbd) & 74127698 (Port)Engine Model No.-QSB 6.7 INT 473 HP Run Hours (Port) – 5853.50 Hrs, (Stbd)- 5854.00 Hrs(**New spare parts to be replaced from OEM/Authorised dealer)MAIN ENGINE AND ENGINE ROOM :-A.Parts required to be replaced :- All sea water line, Bilge, suction and fire line with all valve required cleaning by chemical and pressure test. If any found damage/poor condition required to be replaced. (01 Job) 22 Both main engine and gear box mounting and vibration pad required to be replaced. (2 Set) 23 Both main engine inter cooler and oil cooler required to be replaced. (2 Set) 24 Battery of both main engine-02 x 02 (180 AH), 04Nos, DG Set-01 No (120AH) and emergency battery-(180 AH), 02Nos required to be replaced.(7 Nos) 25 Convertor of 24-volt DC to 13.7-volt 10 AMP required replaced. (1 No) 26 All defective safety device required to be replaced (1 set) 27 Complete hose pipe & flexible pipe required to be replaced. (01 Job) 28 Flexible fuel line with clamp required to be replaced (1 Job) 29 Defective Exhaust pipes /flanges/mufflers required to be replaced. (1 Job) 30 Sea water pump and fresh water pump required to be replaced. (02 Set) 31 All retaining /non-retaining /delivery valves with flange, spindles required to be overhauling and defective parts required to replace. (1 Job) 32 All gaskets and nuts and bolts of retaining, non-retaining valve and discharge valve to be replaced (1 Job) 33 Both engine all kind of Engine harness and Engine sensors required to be replaced. (1 Job) 34 Both engine Alternator to be replaced. (2 Nos) 35 Both Main Engine, Lube oil filters, fuel filters, coolant, engine oil etc need to be replace with OEM recommended consumable items and spares from OEM/OEM authorised dealer. (01 Job) 36 B. Services required to be carried out :-All accessories i.e. Turbo charger, water cooler, self-starter, fuel pump, fuel injectors etc required complete overhauling/ servicing / calibration and defective spare parts to be replaced. (1 Job) 37 All Fire hydrant, with accessories & nozzles required to be serviced and fire hose required to be replaced. Also, defective parts required to replace. (1 Job). 38 Engine alarms check, operational instruments to be made operational. (1 job) 39 Electrical fire pump/ Bilge pump complete overhauling with replacing shaft and bearing and impeller etc. Also, defective item to be replaced. (1 Job) 40 DG SET A. Parts required to be replaced :-8 KVA DG set (Marine grade) required to be replaced with new version in same capacity with complete accessories of reputed brand for which availability of spare parts easily in market. (1 No) 41 One additional new 01 HP mono block pump to be provided for use in emergency basis (1 No) 42 FIRE ALARMA.Parts required to be replaced :-All fire alarm system to be service and be made operational and horn system made with 24volt, stainless steel small size dual (marine grade) is required to be replaced. (1 Job) 43 Defective wiring, switches, cables and sensors of fire alarm required to be replaced. (1 Job) 44 Fire hose box on aft deck found wasted, same to be renewed (01 No) 45 DeckD D fire pump found wasted, same to be replaced ( 01 No) 46 BLOWERS A. Services to be carried out :-All blower and exhaust motor to be to be replaced with same capacity and make. Also base of blower and exhaust fan be required to be replaced by SS & FRP ( 01 Job) 47 STEERING SYSTEM:-Hydraulic steering system to be overhauled and hydraulic oil to be replaced (01 No) 48 Solenoid switch required to be servicing ( 01 Set) 49 GEAR BOX (**New spare parts to be replaced from OEM/Authorised dealer spare parts)A.Parts to be replaced :-Both gear box complete overhauling & defective parts to be replaced.( 01 Set) 50 Both M/E gear box coupling oil seal, recommended gear oil as per OEM required to be replaced. (2 Set) 51 Gear oil cooler servicing and sensors to be replaced. (2 Nos) 52 PROPULSION UNIT (**New spare parts to be replaced from OEM/Authorised dealer spare parts)A.Parts to be replaced :-Propeller shaft to be replaced (fit with proper alignment) (2 Nos) 53 Rudder & Rudder Bush, ‘P’ bracket bush, foundation bolt, Sturn tube bush and gland bush required to be replaced. (fit with proper alignment)( 02 Set) 54 P’ bracket foundation hanging bolt to be replaced and foundation to be made water proof. (repair and realignment) ( 01 Job) 55 SPECIAL EQUIPMENTA. Parts to be replaced :-All navigation lights, deck light, wheel house light & crew cabin light, defective bulbs, switches, wiring (24 Volt and 230 Volt),Deck panel board defective switches and lights required to be replaced. (1 Job) 56 One Digital multi-functional display to be provided at appropriate place in cabin preferably at wheel house console. Also feed of all navigational equipment’s like RADAR, Echo Sounder, Magnetic Compass, AIS etc should be synchronised in above multifunctional display.( 01 Job) 57 360-degree marine type CCTV camera at mast to be fitted with complete display and UPS.( 01 Set) 58 B. Services to be carried out :-GPS system required servicing with calibration (1 No) 59 Magnetic compass required to be serviced and calibrate. (1 No) 60 SEARCH LIGHTSA. Parts to be replaced :-Search light required to be replaced.(02 Nos) 61 Flood lights required to be replaced with (LED). (1 Set) 62 LIFE SAVING EQUIPMENT Life rafts required to be servicing and to be install on the roof of boat (if IRS permit) (2 Nos) 63 Hazardous duty life jackets to be replaced. (6 Nos) 64 Life buoys SOLAS approved with 30 Mtr life lines to be replaced. (4 Nos) 65 Distress signals of the vessel should be replaced. EPIRB, SART, AIS to be serviced & make operational. (1 Set) 66 FIRE FIGHTING EQUIPMENT’S:All fire extinguishers required to be replaced as per FFA plan. (1 Job) 67 TANKSAll tank air vents required to be replaced. (1 Job) 68 Fuel Tank to be cleaned, top cap to be renewed and leak testing to be carried out (02 Nos) 69 TOILETToilet system required servicing:Pipe line of toilet to be cleaned, discharge motor to be renewed and toilet flushing and whole system required to be operational. Pressure water system to be overhauled & make operational. (1 Job) 70 One additional discharge motor to be provided as spare. (1 No) 71 AC & VENTILATIONS Air conditioning unit required servicing/overhauling, AC cooling pump required to be replaced and other air condition related defective item to be replaced, also refill refrigerant gas. (1 Job) 72 Operating panel board check and defective items to be replaced. (1 Job) 73 MISCELLANEOUS A. Parts to be replaced :-All DC bunks fans to be replaced (6 Nos) 74 All water tight door seal rubber packing required to be replaced and testing to be carried (1 Job) 75 Door defective locking system required to be replaced. (1 No) 76 Water leakage from wheel house roof and crew cabin wall side required to be repaired with roof sealing. (1 Job) 77 1 KVA Inverter UPS system required to be provided for emergency lighting. (1 No) 78 B. Services to be carried out :-Manual bilge pump required to be serviced. (1 No) 79 Visual/manual fuel pipe measuring system may be installed outside the tank to check the fuel level. The fuel supply line to both main engine and DG set be made completed. (1 No) 80 ELECTRICAL SIDE Insulation resistance (merger test) and OEM recommended preventive maintenance to be carried out and the following electrical items should be made operational/functional. All electronic components, controls and wiring used on engine and the boats are to be marine version complying with IP 65 rating.All electrical cable line (AC and DC line) is required to be repaired and make it serviceable by replacing defective parts. Also all line to be lying in cable tray. (1 Job) 81 All electrical panel board with line required checking and be in functional Condition. (1 Job) 82 Cabin and exhaust fans with toilet exhaust fan be checked and servicing and make operational. (Defective parts required to be replaced.) (1 No) 83 Multi Bty isolator 24Volt DC, 80 AMP 3 Pin, 2 Out required to be replaced. (2 Nos) 84 Shore supply socked to be renewed. (1 Job) 85 PAINTINGUnder water hull surface cleaning and paintingPainting Scheme:Pen guard HB primer (Epoxy primer) 01 Coat – 100 Micron (DFT)Safe guard universal ES grey tie coat 01 Coat – 100 Micron (DFT) Sea Quantum pro-u light red- 01 coat – 150 micron (DFT) (Silyl Acrylate Anti-fouling self-polishing paint) Sea quantum pro-u-dark red – 01 coat – 150 micron (DFT)(Silyl Acrylate anti-Fouling self-polishing paint) Metal oxide paint & primer to jet units. Under water portion anti-fouling paint (Safe Guard Universal ES Grey, Pen Guard HB Primer, Sea Quantum Pro-U, Light Red, Sea Quantum Pro-U Dark Red) to be required as per international maritime organization (IMO) scheme. Painting should be done as above painting scheme:i. All above water painting as vessel requirement Above water level complete cleaning surface finishing and lamination wherever required and painting as per vessel painting scheme.ii. All vessel outer body required paintingVessel outer body cleaning and complete painting in disruptive pattern as per original painting scheme. Fire retardant paint inside the cabin and engine room to be carried out. (01 Job) 86 LMG & MMG Protection shielded NIJ – level-III & safety guard of gun mount required re-fitting/servicing. (01 Job) 87 Bollard and cleat checked and serviced. (01 Job) 88 Charges for Dry Docking/Piloting/Inspection and Insurance (1 Job)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Gujarat View Result →
39.
Public Administrative Department #10363312 Price Bid
Tender For Construction Of New Office Building Of Municipal Board Nawa - CIVIL WORKSClearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 2 Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 3 Add extra for foundation/trenches/drains for every additional lift of 1.5 Mtr. or part thereof inAll kinds of soil 4 Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. 5 Supplying chemical emulsionin sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% 6 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) . 7 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). (UNDER FLOOR) 8 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (FLOOR UNDER FOOTING AND FOUNDATIONS 9 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M25 grade Design Mix by usingmin 410 kg of cement per Cum . 10 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M25 grade Design Mix by usingmin 410 kg of cement per Cum . 11 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix 12 Providing and laying in position Ready mix concrete manufactured in fullyautomatic Batching Plant andtransported to site intransit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge.All works upto floor V floor. Design Mix by usingM-25 grade concrete by using min 410 kg of cement per Cum 13 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 14 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters,buttressesplinthandstring course. 15 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 16 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Columns, pillars, posts and struts etc. 17 Add extra for additional height in centring, shutteringwhere ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at alllevels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured) 18 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.(Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) 19 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 20 Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m) fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes. 21 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 22 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 23 Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand) 24 Add extra providingand placing in position 2 Nos. ,6mm Ø M.S. barat every thirdcourse of half brick masonry 25 Providing and fixing Stone jali 40mm thick Red/Pink sand stone throughoutin cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali patterns to be cut square to jali slab without any chamfers etc: 26 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . 27 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 28 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 29 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect 30 Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specificationsincluding primer coat and protecting coat including scaffolding and safety provisionTrowel Finish av. thickness 1500 to 2000 microns. 31 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work 32 Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mmand 10 mm thick as per approved design 33 Making grooves as per design in plaster 10mm to 20mm wide. 34 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 600X600mm 35 size600 mm X 1200mm 36 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size600 mm X 600 mm 37 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 38 Extraforusingsize above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size. 39 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm 40 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001Sqcm 41 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 42 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles includingrubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement. 43 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South Red1501 Cm2 to 3600 Cm2 Tiles 44 Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite/Kota Stone Work Full Edge moulding 45 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete 46 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 47 Providing and fixing 1st quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 48 Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using : ISI 9 mm teak ply one side BWR 49 Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile E 50 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A: 35 mm thick . Commercial Veneer both side 51 Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 52 Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails completeas per approved by engineer in charge. 0.8mm thick mica 53 Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 54 Providing and fixing fully panelled /partly panelleddouble leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure ‘A’ and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide, beading of 25mm x 15mm size on both faces : 35 mm thickGhana wood grade I 55 Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent withpair ofCP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 56 Providing and fixing of uPVC casement fixed windows or ventilators manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of acCumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows as per the requirement. Frame shall have ‘O’ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Glazing bead of size 34 x 20mm with ‘K’ & ‘O’ type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float glass.All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height & width and silicon glue is applied to fill up the crevices between wall and window frame. Complete in all respect as per the drawing and specifications and direction of engineer-in-charge. (Insert 6mm tougend glass) 57 Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side.Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-Eweather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shuttershall be made of 39w x 69h mm Extruded 3 box multi-chamberUPVC Window profile section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully. (Insert 6mm tougend glass) 58 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portionPowder coating aluminum( minimum thickness of powder coating 50 micron) 59 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With float glass panes of 8 mm thickness 60 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminatedparticleboardwithdecorativelaminationononesideandbalancinglaminationonotherside. 61 Grading roof for water proofing treatment withwater proffing compoundCement mortar 1:3 (1 cement : 3 coarse sand) 62 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 63 Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. 64 Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. 65 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick 66 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurryof cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. 67 Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : 68 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) 69 Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/Sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per 70 Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 71 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 72 P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC. 73 P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. 74 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: (Size 580x440 mm.) 75 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: :PVC with PVCbend as per IS : 7231 . 76 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top 77 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick 78 Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make 79 P & F Liquid Soap Container with brackets complete of approved make: C.P. brass 80 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 81 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:15 mm dia nominal boreB Class 82 25 mm dia nominal boreB Class 83 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.15 mm dia nominal boreA Class 84 25 mm dia nominal boreA Class 85 50 mm dia nominal boreA Class 86 Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal boreB Class 87 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore. 88 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: Brass 400 gm. 15mm nominal bore. 89 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.Not less than 400 gm, 20mm. 90 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 91 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 92 Gun-metal 25mm nominal bore. 93 Gun-metal 50mm nominal bore. 94 P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:50mm nominal bore. Horizontal 95 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved desig1000 Lt. Capacity 96 500Lt Capacity 97 Hoisting Charges for each floor :For ITEMS 2.26.1 TO 2.26.4 98 For ITEMS 2.26.5 TO 2.26.8 99 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant110mm dia 100 160mm dia 101 P&FrigidPVCpipefittings(IS:4985mark)ofapprovedquality/makeincludingjoining the pipe with solvent cement rubber ring and lubricantCoupler (socket)75mm dia 102 110mm dia 103 160 mm dia 104 Reducer 110 X 75 mm110mm dia 105 160 mm dia 106 Plain Tee75mm dia 107 110mm dia 108 160 mm dia 109 Door Y110mm dia 110 160 mm dia 111 Bend 45110mm dia 112 160 mm dia 113 Bend 87 .5110mm dia 114 160 mm dia 115 Door Bend (Top Side110mm dia 116 Vent Cowel110mm dia 117 P- Trap110mm dia 118 Gully trap110mm dia 119 Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M 120 Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C.flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design :Depth up to 1.5 M 121 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 x 450mm depth upto0.5 M Cement cover with frame 122 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) 123 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make75 mm dia 124 110 mm dia 125 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /makeCoupler75mm dia 126 110mm dia 127 Bend 87.5 Dg.75mm dia 128 110mm dia 129 Bend 45 Dg.75mm dia 130 110mm dia 131 Door Bend 87.5 Dg.75mm dia 132 110mm dia 133 Single Y75mm dia 134 110mm dia 135 Socket Plug75mm dia 136 110mm dia 137 Pipe Clip75mm dia 138 110mm dia 139 Nahani trap with jali 4110mm dia 140 Vent Cowel 110mm dia 141 P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor:Size 450x350mm 142 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (small) size 456x355x265mm. 143 Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 240 Cm. dia outside & 240 Cm. depth 144 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 145 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 Sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil 146 Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. 147 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. :M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominal size). 148 Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactorto achieve the desired density including all material, labour, mach-nery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401] includiong with all lead 149 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge). 150 M-40,80mm thick to be used in medium- traffic ( Medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc Category A Denated units to key into each other on four faces zigzagshape as per IRC SP 63:2004 151 Construction oftubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemedcompleted only after obtaining sound free water during pumping.200 mm nominal bore 152 Diameter 900 mm+C159Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. 153 Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with40 mm thicknessDiameter 900 mm 154 Supply & lowering air line of 25mm dia, G.I. pipe B class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc. 155 Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge. 156 Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids Size 9 to 12 mm 157 Size 3 to 5 mm 158 Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids. 159 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 200 mm Nominal Bore. 160 Supply and Fixing of Big steel Almirah overall size of916mm (W )x486mm (D )x1980 mm(H) with weldedconstruction. It should have the shelf thickness of 0.7mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high y eld strength) and all other components shall have a thickness of 0.9mm. The Almirah should have a Mazak handle and Three way locking mechanism with Shooting Bolts.It should have a height wise adjustable shelf mounting .Itshould also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated. Plenty of colour options and shelving options shall be available ISimarka brand (Godrej or equivalent) as per approved colour, shape,design,type by engineer in charge. 161 Supply and Fixing of small steelAlmirah overall size of 760mm (W )x455mm (D )x1325 mm(H)with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. The Almirah should have a 2 Mazak handle and Three way locking mechanism with Shooting Bolts.It should have a height wise adjustable shelf mounting.It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated.Plenty of colour options and shelving options shall be available ISimarka brand (Godrej or equivalent) as per approved colour, shape, 162 Providing and supplying Canning Chair of size 455mm X 580mm X880mm. IIshould have wooden canning support at back and bottom supported by steel frame 3 2mm thick,powder coated round pipe with full armwooden handles onsides and other fittings as per direction of enaineer in charae. 163 Providing and supplying Canning Chair of size 455mm X 580mm X880mm. IIshould have wooden canning 4 support at back and bottom supported by steel frame2mm thick,powder coated round pipe without woodenhandles as per approved colour, shape,design,type by 164 Providing and supplying Officer high back Chair, The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around.The back foam is designed with contoured lumbar support for extra comfort. BACK SIZE:65.0cm.(W) X 71.0cm.(H) SEAT SIZE:65.0cm. (W) X 65.0cm.(D) andreinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seaUarmrest connecting strip assembly made of steel.The center pivot mechanism Is designed with the followingfeatures:360 revolving type.Tilt tension 5 adjustment. Upright locking.The pneumatic height adjustment has an adjustment stroke of 12.5 cm..The pedestal Is made of HR steel and fitted with 5 nos.twin wheel castors (castor wheeldia. 5.0cm.). The pedestal is covered with a P.P moulded cladding for modem and aesthetic looks.The pedestal is 65.0 cm. pitch-centre dla.(75.0 cm with castors). The twin wheelcastors are injection moulded In 30% Glass Filled black Nylon, as per approved colour, shape,design,type by engineer In charge. 165 Providing & Supplying table or size 1500mmx900mmx750mm, Top should be nnished with 18mm MDF Bos:d post formed Both side with 0.6mm laminate of approved make & design & with appropriate balancer on the bottom or the top. All verticals supportsincluding Modestypanel should be of 18mm prelaminated MDF Board with 2drawers & 16 Swing door per approved design.The drawers to beprovided with ai:proved handles and fixed on Telescope channels.AppropriateEdge Bendings to be provided where necessary with PVC beading 2mm thick to be provided. Footrest to be provided with 1Bmm MDF prelaminated board of the same color code.P&F PVC wire managers capslo be provided on the table top, as approved colour,shape, design,type by engineer In Charge 166 Providing & Supplying side table of size 900mmx450mmx750mm. Top should be finished with 18mm MDF Bos:d post formed with 0.6mmlaminate oras same as the Table,approved make & design & with appropriate balancer on the bottom or the topAllvert icals supportspanel should be of 1Bmm prelaminated MDF Board. Having 2Drawers & 1Swing7 door CPU unit. Keyboard tray, with mouse rest to beprovided.Appropriate Edge Bendings to be provided where necessary with PVC beading 2mm thick to be provided as per design.The drawers to be provided with approved handles and fixed on Telescope channels.P&F PVC wire managers caps to be provided on the table top, as per approved colour, shape,design, 167 Providing and $Upplylng table of size 1200mmX 750mmX750mm high as per design. The table top should be finished with 0.6mm thick laminated postrorming on 18mm thick MDF board.The 3 drawer unit (provided withlocking mechanlsm)and all other8 exposed vertical supports should be finished with steel members or approvedshade,colour and make.Appropriate moulding/edge bindingto be provided where necessary with PVC beading 2mm thick lo be provided as per approved colour, shape,design, 168 Providing & Supplying Computer table of size 900mmx450mmx750mm.Top should be finished with 18mm MDF Bos:d post formed with 0.6mmlaminate or as same as the Table,approved make & design & withappropriate balancer on the bottom or the topAllverticals supports panel should be of 1Smm 16.00 Each 12100.00 1g3500.oo prelaminated MDF Board. CPU uni Keyboard tray,with mouse restlo be provided.Appropriate EdgeBendlngs to be provided where necessary with PVC beading 2mm thck to be provided as per approved 169 Providing & Supplying depository/cashcabinet made up of CRCA steel with external size or 5g1 x 460 x 460 mm,2 nos of lockable drawers and single door cabinet fitted 3.00 Each 22848.00 68544.00with 6 leverlock system 1vith completein all respect. (approx weight 160 kg to 180 kg) as per approved 170 Book Case - 4 Door Book Case shall have the configuration or 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors ,which shall faci itate easy use.The Book Case shall be made fromprime quality steel. It shall have a Rigid Knock Down Conslructlon.The TopPannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA andother components from O.Smm CRCA. Each door shall have a 6 Lever Cam Lock with Comrron Key. 3mm thick glass should beused in each door for clear inside vision whih shall besecured Ina metalframe through a rubber gasket.11 Scissor Mechanism should be providedin each door for 20.00 Each 17248.00 344960.00receding Inside the top or every compartment andItshall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which Is easy to grip.Each compartment shall have a storage shelf with good capacity. The 4 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping.The Hn shlngshall Include Epoxy powder coated.Complete work as per the as per approved colour,shape,design,type by engineer in charge. 171 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete 172 FIRE FIGTHING WORKProviding, Fixing, Jointing, Testing & Commissioning of Heavy duty MS C class (Heavy) pipes conforming to IS 3589 / 1239 part-I for hydrant and sprinkler applicationsincluding cutting, screwing, welding etc. & forged steel fittings like elbows, tees, tapers, reducer, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts including cutting hole and chase in brick or RCC walls/ slab and making good the same. complete with painting of one coats of Red Oxide and two or more coats of synthetic enamel paint of requiredshade complete as required. (Pipe to be tested @ 10Kgf/Sqcm for 2 Hrs.). All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 150 mm dia 173 100mm dia 174 80mm dia 175 50mm dia 176 40mm dia 177 32mm dia 178 25mm dia 179 Supplying and fixing first -Aid Fire hose reel Drum wall mounted swinging type with MS construction powder painted in post office Red, conforming to IS 884-1985 with upto date amendments, complete with the following as required.(A) Thermoplastic / Rubber Hose(B)20 mmdia UL, FM Bronze / SS nozzle with 5mm orifice (C)Drum and brackets for fixing the equipments on wall.(D) Connections from riser with 20/25 mm dia Brass/GM gate valves with screwed end and conforming to IS:778 Class-1through Forged steel Screwed Union & M.S. pipe. Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . With 30 m x 20 mm High Pressure Braided Rubber Hose as per IS:5132 - 1969and Bursting pressure 42 Kg/sqcm 180 Supplying and fixing of SS 304 Single / Double headed oblique pattern hydrant landing valve (internal/external) with 75 / 100 mm dia flanged inlet & 63 mm dia instantaneous type female outlet coupling with cast iron wheel complete with ABS cap and chain and all accessories as per IS:5290-93 (Type-A) in cluding matching flange (14 mm thick),nuts, bolts, washers, gaskets,etc as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Single Headed with 75 mm Dia. Flanged Inlet 181 Supplying and fixing of flexible hose made with 100% polyester, black EPDM internal rubber lining with External coat of synthetic elastomer (IS:636, type-A)63 mm dia, 15 mtr. Long RRL hose pipe with instanteneous type 63 mm dia SS-304male and female couplings(IS:903) duly bound and riveted to hose pipes with copper rivets and SS wire etc. as required.Appropriate Test Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. 182 Supplying & fixing SS-304 Short Branch Pipeconforming to IS: 903:93 fitted with 20mm (nominal internal diameter)bore nozzle, for projecting water in form of solid jet. The Branch shall have 63mm Male Instantaneous Inlet, suitable for use with 63 mm size Fire fighting hoses. H.P. tested to 21 kgf/cm² for 2.5 minutes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 183 Supplying and fixing of 750 mm x 600 mm x 250 mm Outdoor application Fire Hose Cabinet made of 1.6 mm thick MS sheetDuly powder coated in red color externally and white internally with 6 mm thick glazeddoors with Expanded Metal 2 mm thick Jali including necessary locking arrangement suitable to accommodate 2 Nos 15 Mtr. Long RRL Hose and 1 No. branch pipe on Existing Wall / Angle Iron Frame as required. (Cost of MS structure for mounting Frame is to be Paid Extra) All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 184 Providing and fixing of Fire / Electrical Shaft Door made frompowder coated (50 Micron) aluminiumpartialy glazed with 6 mm thick glass and Partialy/ Fully Louvered with Outer frame of AluminiumSection of Size 100 mm x 45 mm x 1.5 mmand Shutters Top, Middle & sideSection of Size 82 mm x 45 mm x 1.5 mm, Bottom Section of Size 110 mm x 45 mm x 1.5 mmComplete with Hinges, Tower bolt, Handle, Aldrop, Locking Arrangement including dash fasteners of required dia and size, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. as per drawings and the directions of Engineer-in-charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 185 Supplying, Installation, Testing & Commissioning ofElectrical Driven fire fighting duty Terrace pump as per TAC andIS 12469-1988., Factory assembledin Pump make OEMsuitable for automatic operation and consisting of following details given asA, B, C, D, E, F, G and H.(A) Horizontal End suction Centrifugal Back pull type pump complete for delivery of below mentioned discharge and Head(B) Material of construction : Pump Casing - Cast Iron, Impellor- Bronze, Shaft - SS 410, Packing - Mechanical Seal(C) Squirrel cage induction motor (IE-3 Class) suitable for 3 phase, 415 V, 50 HZ, Ac supply , Class -F Insulation, Synchronous speed not Exceeding 3000 RPM, T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible (Love Joy type) coupling , coupling guard complete in all respect .(D)Common bed plate fabricated frommild steel channel for installation of pump and Motor including anti vibration pads.(E) The Hydrostatic tests (2 times of design operating head or 1.5 times the shut off head whichever is higher) and performance tests (to determine developed head, Pump BHP and efficiency v/s Flow) of pumps along with trip test shall be carried out at manufacturer’s works in Virtual / Physical presence of Department’s representatives.(F) Physical & Chemical Test reports of i) Pump casing (ii) Impeller (iii) Shaft (iv) Shaft sleeveand Dynamic Balance certificate is to be submitted by OEM(G) Suitable size Reinforced cementconcreat (M-30) foundation with foundation bolt, Nozing Angle of size 40mm x40mm x5 mm ( Cost of RCC Foundation to be paid Extra )(H) Weather proof hood fabricated from 5mm thick UV stablised FRP sheet supported by 50 mm x 50 mm x 5 mm Angle Iron fram above pumpset to protect it from weather All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR 450 LPM with 35 mtr head 186 Supplying and fixing Inlet Breeching Connection of CI body with Gun Metal male instantaneous inlet couplings with Inbuilt NRV, Drainage Connection with 50 mm Brass gate valvecomplete with PVC blank cap and chain as required for 150mm dia Outlet with 1 no. Matching Flange (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following Ways. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 4 Way 187 SITC of installation control valve of cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continous alarm when the wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following sizes.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 150mm dia 188 Supplying and Fixing of PN 16 Cast Iron Dual Plate Wafer Type Check Valve / Non return valve with SS / Bronze flap complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 80 mm dia 189 100 mm dia 190 150 mm dia 191 200 mm dia 192 Supplying and Fixing of PN 1.6Butterfly Valve (Wafer Type) with S.G Iron Disc and confirming to IS:13095 complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 150 mm dia 193 100 mm dia 194 80 mm dia 195 Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC typeFire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificatefrom OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 6 kg 196 Supply & Fixing of CO2 type Fire Extinguisher conforming to IS:15683:2018, charged with CO2 gas (purity 99.7% conforming to IS 15222), Powder coated Internal & External Surface Manganese steel ISI marked as per IS 7285 cylinder body , Wheel type Forged brass release valve ISI Marked as per IS 3224 with Inbuilt safety release device ((Fusible plug and Rupture Disc Type), 1.0 Mtr. Metal wire braided hose having minimum bursting pressure of 140 Kgf/cm2, Horn with metallic thread connection, QR code for Product Traceability,including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificatefrom OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSRCapacity 4.5 Kg. 197 Supplying and Fixing ofGalvanized Mild Steel fire bucket Confirming to IS: 2546 : 1974 with one coat of primer and two coat of enamel paint of approved shade on Angle Iron ( 50 x 50 x 5 mm) Stand of Size 800 x 1240 x 400 mm with MS 22 SWG Galvanized Canopy, 4 Hooks for Bucketsincludingassociated civil works etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 198 SITC of UL 10th edition / EN54 / VDS certified Addessable Manual Call point (MCP) with LED/ FIRE Indication Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 199 SITC of UL 10th edition / EN54 / VDS certified Addressable sounder with strobe light,Loop Powered / Direct powered from FACP with sound level 90 dB and programmablefrom the panel etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 200 SITC ofResponse Indicatorfor indicating the activation of the Remotely located Detector for Conventional type detectors as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 201 SITC of EN / LPCB/ UL listed / approved conventional automatic fire Alarm Rate of Rise cum fixed temperature thermister typeHeat Detectors , 12 / 24 volt D.C., visual alarm indicator (LEDs) Blink - green in stand by and Steady - red in alarm complete in all respectswith baseas required.including the cost of all accessories Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 202 SITC of EN / LPCB/ UL listed / approved conventional automatic fire Alarm Optical/Photoelectric type smoke detectorsof photo-optic sensing chamber, 12 / 24 volt D.C., visual alarm indicator (LEDs) Blink - green in stand by and Steady - red in alarm complete in all respectswith baseas required.including the cost of all accessories Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 203 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR2 x 1.5 sq.mm 204 3x 1.5 sq.mm 205 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002in existingsurface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR4 Pair 206 2 Pair 207 Supplying and fixingof CE certified and UL listed GI wire mesh cable tray made from spot welded steel wirehot dipped galvanised between 60 and 80 microns of zinc as per BS 729including horizontal and vertical bends, reducers, tees, cross members and other OEM made accessories like wall clamp, hold down clamps, Earthing terminal, brackets as required, and duly suspended from the ceiling with electro-zinc coated TF rods,etc. as required of following sizesAll as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .500 mm x 100 mm x 6 mm 208 300 mm x 100 mm x 6 mm 209 SITC of UL 10th edition / EN54 / VDS certifiedActive Repeater Panel for Fire Alarm System with inbuilt networking port (both RS485 & Ethernet),Serial port for printer,two supervisory inputs,two position key switch and USB port for programming. The Repeater Panel shall allow users to acknowledge, reset,silence, program, view hisory events.etc (All functions similar to main panel)The user interface of the repeater panel shall be same as the Main Controller with menu driven user interface with smart search.including the cost of all accessories Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 210 SITC of PA system Operator Console of following wattage to be installed withConventionalfire alarm systemcomplete with following capacity , channel mixing amplifier , 1 no cardioids goose neck microphone , 1 no professional grade cassette deck/ CD Player , 16 zone floor selector console ,equipment rack complete in all respects. PA system shall be coupled to the Fire Alarm System. Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 1x 240 Watt 211 SITC 6 watt Speakermounted in M S sheet box with perforated front mesh for PA and Emergency System. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 212 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & itsISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSRMedium point (up to 6 mtr.) 213 Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988) accessories, round tiles, 2 Nos Hot Dipped Galvanized M.S Modularbox of 1.2 mm thickwith earth terminal,2 Nos10 A two way Modular switch, 3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate,screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSRLong point (up to 10 mtr.) 214 Long point(up to 10 mtr.) 215 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSRMedium point (up to 6 mtr.) 216 Long point(up to 10 mtr..) 217 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR3x 1.5 sq.mm 218 3x 2.5 sq.mm 219 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 220 2 x 6.0 sq. mm. + 1 x 4.0 sq. mm. 221 2 x 6.0 sq. mm. 222 4 x 10.0 sq.mm 223 4 x 16.0 sq.mm 224 P & F 1.2mm thickM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR 225 Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) 226 Providing & Fixing ofof BLDC Technologyventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutterincluding making connection, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .250 mm sweep with Min. Air delivery 1150 cmh, 1300 RPM 227 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 228 Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating 229 Three pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 230 50/63 A rating 231 100 A rating 232 Four pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 233 50/63 A rating 234 Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock,min. operation 10,000 upto 63 A rating and5000 for 100 Aratingand minimum phase termination capacity of 35 sq.mm. rigid wire, IP 20 contact protection with existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRTwo pole 30 mA sensitivity6A-32 A rating 235 40 A rating 236 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRGlazed door (single phase) IK-09 and IP-43 with Metal end box8 Way (8+2) 237 Metal door (Three phase) Per phase isolation, Horizontal IK-09 and IP-43 with Metal end box6Way(Incomer 8,Sub Incomer2+2+2) 238 Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box withprovision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 100 A rating copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR6 Way(8+18) 239 Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure A attached with this BSR 240 Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonatewith brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,minimum width ofswitch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 25 Amp.2 Moduleswitch With LedIndicator 241 Providing & Fixing of modular type lockable feature socket dulymade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR25 Amp. 2 Module Socket 242 Providing & Fixing of following modular accessories as per PWD specification for electrical Works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSRRJ-11 telephone jack Double line 243 RJ-45, Cat 6 computer jack with shutter 244 Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1 Module 245 4 Module 246 Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSR5 step fan regulator 2 Module 360 dgree rotating 247 Plate Earthingas per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 248 Supply & Laying following size earth stripin horizontal or vertical run in surface by means of Earth strip DMC Insulatorincluding riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 25mm x 6mm G.I. ( Hot Dipped) Strip 249 Supply & Laying following size B class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc.for laying earth conductor/ strip / cable in ground/ surface/ recess as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 40 mm dia. 250 Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1170mm(+/-10%) LED batten with min. lumen output 2200 lm 251 570mm (+/-10%) batten with min. lumen output 1000 lm 252 Providing & Fixing of IP20, 2x2 LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .Minimum lumen output 3600 lm 253 Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .Minimumlumen output 650 lm 254 Minimum lumen output 1950 lm 255 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 256 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002in existingsurface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR2 pair 257 Supply and Laying of PE Insulated, PVC Inner Sheathed, armoured & PVC Sheathed Telephone Cable. with 0.5 mm thick Solid Annealed Bare Copper Conductor as per IS: 8130/84 telephone cable confirming to TEC specificationsGR/WIR 06/03, Mar.-2002 in existing pipe / open trench / Cable tray / on surface including making necessary connection, testing etc. as required of size. For additional technical parameters of product / work refer Annexure A attached with this BSR50 pair 258 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR25 mm 259 Supplying and fixing of ISO Certified company made Krone module with base frameas per PWD specification for electrical Works, in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted., including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .50 Pairs 260 CCTV SURVEILLANCE WORKSupply, Installation, Testing and Comissioning of Rack mounted 19 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panelswith Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Modular Patch Panel Loaded with Cat -6A I/O 261 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 262 Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Cat 6A, Sheilded Information Outlet 263 Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture ,material should bePC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Single Aperture 264 Supply, Installation, Testing and Comissioning of Rack mounted 19 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panelswith Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Modular Patch Panel Loaded with Cat -6A I/O 265 Supply & Installation of IP-20 & IK-08 , UL ListedWall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with UMarking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. Accessories like: 1 No of 19 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastneretc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 9 U Rackwith Width 600 mm & Depth 400 mm + 100 mm 266 Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent PoE Giga Ethernet Switch providing 24 x 10/100/1000 MBPSPoE Giga Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with minimum 370 Watt PoE Power Budget with related LAN Base Software including making connections etc as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 267 SITC of 2 MP IR Fixed Dome Network Camera -1/2.7″ Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.002Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Video tampering, UL, CE, FCC certified. 268 Supply Installation testing and commissioning of 32 Ch Network Video Recorder- Connect Up to 64 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, atleast one HDMI output with 4K (3840 × 2160), atleast one VGA output with 2K (2560 × 1440) resolution, Support H.265/MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, 1 × eSATA interface, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 10 TB, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, RS-232, RS-485, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface,Multiple network monitoring: Web viewer, CE, FCC, UL certified. with 30 days backup capacity asrequired. 269 SITC of professional PC alongwith printer and other accessories as required having minimum i7 processor, 8 GB graphic card 1 Tb SSD as per requirement. 270 SITC of 42 inch full HD professional LED display for CCTV monitoring. 271 External Electrical WorkS I T C of star ratedAluminium wound distribution Transformerof following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & as per BEE star - 1 & BIS approved as per IS 2026- 1977 & lossesas defined as per 2014 (Fourth Revision) Level-1 . including standardaccessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C upto 200 KVA & 40-45 degree C for above 200 KVA, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint,including carrying of pre-commission Testing & Charging of Transformer complete in all respect .The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTLof discombefore charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 100 KVA 272 SITC of PLC Based Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stopcommands, control Relays , Ammeter & Voltmeterwith selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets: Appropriate Test Certificate/ report of product/accessories from OEM/Panel Manufecturer shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .20 to 40 KVA 273 Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as requiredcomplete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 274 Providing & Laying XLPE insulated three core ArmouredAluminiumcable for working voltage 11 K.V.(E) confirming IS :7098 P - 2withH4- Grade electrolyticaluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray includingtesting etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .3 core 150.0 Sq.mm 275 MAIN LT PANELSITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andOther parameters requiredas per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)Thickness of CRCA sheet shallbe 2.0 mm,cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting,pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel.The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c)Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar(>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only.All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar/ Flexible wire for Interconnection between Main busbar and Switchgearis to be Paid Extra )(d)Wiring between components within switchgear and Incoming / outgoing cableshall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. (e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)Floor mounted panel shall be mounted on Base frame of ISMCchannel size 100 x 50 x 5 mm( to be paid Extra )(g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.(h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 276 SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR4 pole MCCB With Thermal Magnetic release160 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 277 up to 100 Amp , 10 kA, fixed O/L & fixed S/C setting 278 Supply and fixing of following accessories for Moulded case circuit breaker (MCCB)compatible to main MCCB OEM as per PWD specification for electrical Works, conforming to IS/IEC 60947 P - 2 :2003 including making connection etc complete in all respect. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .Shunt Trip Release 279 Under Voltage Release 280 Extended Rotary Handle 281 Auxiliary contact 282 Spreaders for 250A, 4 Pole MCCB 283 Spreaders upto 125A, 3 Pole MCCB 284 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 0.5 A to 5 A rating 285 Providing & Fixing of ISO certified company made Four Pole By pass Change Over Switch conforming to IS:13947(Part 3) : IEC:60947-3-1 and IEC:60947-6-1, Open execution type in the following ratings.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .100 A 286 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 0.5 A to 5 A rating 287 Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating 288 Four pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 289 50/63 A rating
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
40.
Health and Family Welfare #10350693 Price Bid
Tender For supply of Mri Simulator , Mr Simulator As Per The Specification Except The Following , Mr-Rt Planning , Additional Workstation , Mr Compatible Pressure Injector With Syringes , Full System Ups , Dry Imager , Iv Stand ( Mr Compatible ) , Patient Trolley ( Mr Compatible ) , Music And Pa System With Speakers , Patient Comfort Kit As Per Spec , Hand Held Metal Detector , Metal Detector Door , Wheel Chair ( Mr Compatible ) , Fire Extinguisher Mr Compatible , Mr Compatible Stethoscope , 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , 15.12.1 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , 15.12.2Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead: Of Area Beyond 3 Sq. Metre , 15.23.1Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , 15.57 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge , 2.34.1Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% , 2.35.1.1Diluting And Injecting Chemical Emulsion For Post -Constructional Anti-Termite Treatment ( Excluding The Cost Of Chemical Emulsion ) :Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Litres / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300Mm Including Excavation Channel Along The Wall & Rodding Etc. Complete: With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration , 24.2Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side Of Building / Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40 Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Chakkus, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: - ( 1 ) The Evaluational Area Of The Scaffolding Shall Be Measured For Payment Purpose, ( 2 ) The Payment Will Be Made Once Only For Execution Of All Items Of Such Works. , 15.60 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved , 50.2.25.1 Filling With Contractors Own Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M As Per Direction Of Site Engineer-In-Charge , 50.4.1.1 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size ) Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing For Leveling Coarse Of Floor And Roof Etc. , 50.5.5Reinforced Cement Concrete Work In Arches, Archribs, Domes, Vaults, Shells, Folded Plate And Roof Having Slope More Than 15 Degree Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size ) . , 50.5.33.2 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Above Plinth Level Upto Floor V Level , 5.22.1 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelmild Steel And Medium Tensile Steel Bars , 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platform , 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil , 6.26.2Brick Work With Common Burnt Clay Selected F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) Above Plinth Level And Upto Floor V Level , 50.6.1.2Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand ) Etc Complete. , 50.6.1.8 Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In: Cm 1:6 ( 1 Cement : 6 Coarse Sand Etc Complete , 50.6.3.2 Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x10 Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level For 10 Cm Thick Wall In : Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Including Cost Of Scaffolding Complete , 13.1.1Cement Plaster12 Mmof Mix: 1:4 ( 1 Cement : 4 Fine Sand ) , 13.7.1Cement Plaster 12 Mmfinished With A Floating Coat Of Neat Cement Of Mix: 1:3 ( 1 Cement : 3 Fine Sand ) , 11.37Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) , Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600 X 600 Mm. , 11.41.3 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 800X 800 Mm , Od31976 / 2023_2024Providing And Fixing First Quality Vitrified Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 11.48.2 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , 11.48.3Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 800X800mm , 11.55.1 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , 50.9.1.1Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) , Using Good Quality Anjili Wood / Jack Wood , 50.9.2.1Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineerin - Charge. Using Anjili / Jack Wood , 21.1.1.2 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portionpowder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) , 21.1.2.2 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides , Od31977 / 2023_2024 Supplying And Fixing Flush Door Shutter, Shutter Of Required Size, Thickness 30Mm Thick, Finished With 1 Mm Laminate Of Approved Shade With 9 X 16 Clear Glass Vision Panels As Per Design Including Necessary Hinges , Od31978 / 2023_2024 Frosted Film - Supply And Installation Of 3M Make Frosted Film Pattern Throughout All The Internal Glass Panels Wherever Required Of Approx. 1.5 M Height As Per The Approved Pattern. , Od31979 / 2023_2024 Providing And Fixing Extruded Section Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm ) , With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete , Od31980 / 2023_2024 Providing And Fixing 4.00 Mm Thick Acp Sheet For Cupboard Including All Cost, Conveyance, Labour Charges Etc Complete , 21.3.1 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 4.0 Mm Thickness , 12.45.2 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board Conforming To Is; 2095-Part I , 12.54.1 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Soffit With Help Of Soffit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Sixe38x12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C / C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms / Sqm ( Both Side Inclusive ) , Fixing With Clip In Tiles Into Spring T With :Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25 Mm Height, , Made Of G.I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending . , 12.58.1 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Space Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening Of Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process To Give Stable Crystalline Structure With Minimum Compressive Strength 225 Kg / Sq. Cm, Bending Strength 100 Kg / Sq. Cm, Of Size 595X595 Mm, Having Perforation Of Dia, 10 Mm With Minimum Perforated Area 18% With Non Woven Tissue On The Back Side, Having An Nrc ( Noise Reduction Coefficient ) Of 0.85, With 50 Mm Thick Rockwool Of 48 Kg / Cum Backing. , 21.4.2Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is: 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors, Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer -In- Charge.With Brass Cover Plate Minimum 1.25 Mm Thickness , 21.13 Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , 50.9.11.1Providing And Fixing Thomson Multi Wood Board Or Equivalent Make Paneling 12 Mm Thick, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately ) As Per The Direction Of Site Engineer-In-Charge. , 50.9.12.1 Providing And Fixing Thomson Multi Wood Board Or Equivalent Make, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer ( Fittings To Be Paid Separately ) As Per The Direction Of Site Engineer-In-Charge. , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.69.1 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work , 13.80Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 13.83.2Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour.Two Coats , 13.47.1Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) , 10.16.3 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Electric Resistance Or Induction Butt Welded Tubes , Od31981 / 2023_2024Roofing Sheet With Sandwich Puf Roof Panel With 0.40 Mm Or Nearest Size Pre Painted Galvalume Sheet At Top & Bottom , 30 Mm Or Nearest Size Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete , Od31982 / 2023_2024 Wall Cladding With Sandwich Puf Wall Panel With 0.40 Mm Or Nearest Pre Painted Galvalume Sheet At Top &Bottom , 30 Mm Or Nearest Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete. , Od31983 / 2023_2024 Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500 / 31000 / 40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I / C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses. , 17.2.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , 17.7.1 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , 50.17.1.2 Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge , 50.17.1.5Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 50.17.1.1 Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 17.31 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Od33878 / 2023_2024 Supplying And Fixing Stainless Steel Mirror Finished H Type Handles Including Material Cost, Conveyance And Fixing Charges Etc Complete. , 50.18.7.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 15Mm Dia 12Kgf / Cm2 -Internal Work- Exposed On Wall , 50.18.7.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 10Kgf / Cm2- Internal Work - Exposed On Wall , 50.18.8.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer- In- Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 12 Kgf / Cm2 , 50.18.8.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 32 Mm Pipe 10Kgf / Cm2 , 50.18.8.9.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 110 Mm Pipe 6Kgf / Cm2 , 50.18.9.8.2 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching And Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 4 Kgf / Cm2 , Od31984 / 2023_2024 Providing And Fixing 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Pvc Hollow Section Of Size 59 X 24 Mm And Wall Thickness 2 Mm With Inbuilt Edging On Both Sides. The Styles And Rails Mitered And Joint At The Corners By Means Of M.S. Galvanized / Plastic Brackets Of Size 75 X 220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Fixing Galvanized M.S. Tube Of Size 20 X 20 Mm And 1 Mm Wall Thickness. The Lock Rail Made Up Of H Section, A Pvc Hollow Section Of Size 100 X 24 Mm And 2 Mm Wall Thickness, Fixed To The Shutter Styles By Means Of Plastic / Galvanized M.S. U Cleats. The Shutter Frame Filled With A Pvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Fixing Horizontally 6 Mm Galvanized M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge ( For W.C. And Bathroom Door Shutter ) . , Od31985 / 2023_2024 Supplying And Fixing Name Board Of Various Sizes Using Foam Sheet Board Including Lettering As Per The Direction Of Departmental Officers Including Cost, Conveyance And Fixing Charges Etc Complete. 45X14cm Size , Od31986 / 2023_2024 Supplying And Fixing The Name Board Of Size 80 X 30 Using Acp Board With Acrylic Lettering Including Cost, Conveyance And Labour Charges For Lettering And Fixing Etc Complete , Od31987 / 2023_2024 Supplying And Fixing Inaugration Board Using Granite Slab Including Lettering As Per Direction Of Departmental Officers Including Cost Of Granite, Lettering And Fixing Charges Etc Complete. Size: 100X84cm , Supplying And Fixing Skylight Of Size 1.2Mx 1.8M With Designed Acrylic Sheet Including 4 Numbers Led Tube As Per The Direction Of Engineer In Charge , Od31989 / 2023_2024 Computer Chair The Medium Back Adjustable Revolving Chair Made With Mesh Back Within Built Handle In The Nylon Finish, The Back Is Designed Extra Lumber Support. The Seat Have Provided Seat Cover In Pp Made With 12Mm Hot Pressed Ply And Pu Moylded Foam. The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking. The Base And Pin Wheels Are Made In The Nylon. 120Mm H Gas Lift Should Be Provided With Tower Bellow , Od31990 / 2023_2024 High Back Chair Made With Feather Foam Seat & Mesh Back With Lumber Support. , The Gas Lift Mechanism Should Be Tested As Per Bifmastandards. The Pedestal Should Be Five Legged Injection Mouldedin Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, It Should Have Synchro Any Anglelocking Arrangement , Od31991 / 2023_2024Providing And Fixing Trap Doors For Access To The Areas Above False Ceiling. The Trap Door Shall Have An External Frame Made Of Powder Coated Aluminium Channel On Which The Shutter Is Hinged. Shutter Shall Be Made 3 Mm Thick Acp Sheet Shutter External Frame Of Shutter Made Of Powder Coated Aluminium Channel. Concealed Heavy Duty Hinges Shall Be Used To Mount The Shutters And Locking Shall Be Provided. The Shutter Shall Be Moulded In Level With The False Ceiling Forming A Groove All Around. Sufficient Number Of Hinges And Locks Shall Be Provided To Avoid Sagging Of The Shutter. Key Also Shall Be Supplied. No Extra Rate Shall Be Provided For Suspenders Or Frame Works All Round For Linking The Trap Door To Gyp Board / Any Other False Ceiling. The Rate Including All Labour Charges , Material Charges Ect Complete. , Od33559 / 2023_2024 Supplying And Laying Polyster , Washable And Stainfree Cloth ( Bio-Active Fabric Washable Germfree-Suitable For Icu Room ) Curtain System With Maximum Curtain Cloth Height 230Cm ( Top 30 Cm White Colour Net And 200Cm Light Blue Colour As Per Approval ) Stitching With Stifiner Tape, Pleats, Ironing And Laying In Icu Room Around Each Bed Using Pvc Runner With Hooks&Stopper For Hanging / Sliding Etc. As Per The Direction Of Engineer In Charge Including Conveyance To Site , Laying In Line And Level , Sealing All Cuttings In False Ceiling With Powder Coated Ms Cup , All Leads And Lifts Including All Labour Charges Etc. Complete. ( Unpleated Length Of The Cloth Maesurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measuremnet ) / Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube Hanging Support Of Required Length ( App. Length 1.10M ) One End Fixing From Slab By Using 6Mm Dia. Expansion Bolt At A Distance Not More Than 2 M, C / C Down End Fixed To Powder Coated Aluminium Channel Frame 45X20mm X1mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level , Sealing All Gaps In False Ceiling Due To Hanging Supports , All Leads And Lifts, Including All Labour Charges Etc. Complete. , Od33560 / 2023_2024 Providing And Fixing Vertical Blinds As Per The Direction Of Engineer In Charge , Providing, Making And Fixing In Position Partition Walls Over A Wooden Frame Work Of Size 50X50mm With Hard Wood Pinkoda / Violet / Or Equivalent Frame Work At 60Cm Or Nearest As Verticals And Three Numbers Of Horizontals, Spacing As Shown In The Drawing With 10Mm / 12Mm Thick Marine Plywood On Onesides Of The Frame Work For The Fullheight Of Height And Fixing Plywood With Teak Wood Beadings Between Plywood And Wooden Frame With Suitable Junction Joints And Extra Supports If Needed For Joinery Openings.The Plywood Is Fixed To The Frame Work Using Steel Screws Including Finishing The Joints With Joint Filler Etc.To Get Smooth And Even Finished Joints Including Cost And Labour Charges Of All Materials And The Outer Frames Fixing To Concrete / Masonry By Chipping And Providing Tight Plugs, Making Good The Damages, Including Cost Of All Materials Such As All Wooden Members, Plywood On Onesides, Etc. Complete, Wooden Sections Confirming To The Nearest Dimensions Etc.For Fixed Partitions Etc Complete As In The Drawing And As Per Requirement. The Rate Inclusive Of All Material Charge, Labour, Transportation, Scaffolding ( If Needed ) Loading / Unloading At The Work Spaceetc. Complete As Per The Direction Of Engineer In Charge. , Wood Frame For Fixing Lead Glass ( Lead Sheet Should Overlap Door Frame & Wall ) , Steel Cupboard ( Godrej ) For Storage 6Ft Tall 3 Feet Width , Providing And Fixing 2.0Mm Th. Vinyl Floor With Rubber Based Adhesive Over Clean And Smooth Surface Including Finishing By Rolling A Light Roller All Complete. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Wiring For Group Controlled ( Looped ) Light Point / Fan Point / Exhaust Fan Point / Call Bell Point ( Without Independent Switch Etc. ) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B , Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. Group C , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X 2.5 Sq. Mm + 1 X 2.5Sq. Mm Earth Wire , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.4 X 6 Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 3 X 1.5 Sq.Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.3 X 2.5Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 3 X 4 Sq. Mmm , Supplying And Drawing Following Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor, Unarmored Telephone Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.2 Pairs , Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface / Recessed Steel / Pvc Conduit As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25Mm , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required1 Run Of Cable , Cat 6 Rj 45 Computer Jack Modular Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5 / 6 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 2 Way 5 / 6 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15 / 16 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5 / 6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15 / 16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Telephone Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Tv Antenna Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 1 Or 2 Module ( 75Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 3 Module ( 100Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 6 Module ( 200Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 8 Module ( 125Mmx125mm ) , Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Extra For Fixing The Louvers / Shutters Complete With Frame For An Exhaust Fan Of All Sizes , Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Color Washing Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep , Supply Of 300 / 305 Mm Sweep Light Duty Exhaust Fan In Metal Frame Working On230 Va / C , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required4 Way ( 8+12 ) - Three Phase Double Cover ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required6 Way ( 8+18 ) - Three Phase Double Cover ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way ( 8+12 ) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp / Tp Mcb As Outgoing ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way ( 8 + 18 ) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp / Tp Mcb As Outgoing ( Ip 42 / 43 ) , Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface / Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 2+12 Way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Double Pole, ( Single Phase And Neutral ) , 240 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , Supplying And Fixing Following Rating, Four Pole, ( Three Phaseand Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Dbcomplete With Connections, Testing And Commissioning Etc. Asrequired. 63 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, ( Three Phase And Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240 / 415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , Supplying And Fixing Following Rating, Three Pole, Mcb63 A Rating, 3 Pole, Mcb , Supplying And Fixing Following Rating, Three Pole, Mcb 40 A Rating, 3 Pole, Mcb , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required100 Amp, 30 Ka 4 Pole , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required125amp, 36Ka , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required. 16A -100A, 35 / 36 Ka ( Ics=100%Icu ) , 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm ( Clamped With 25X3mm Ms Flat Clamp ) , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 185 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 240 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 25 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 50 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 10 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 16 Sq Mm With Factory Made Clamp , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 70 Sq Mm , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armoured Aluminum Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 70 Sq Mm , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.225Mm Width X 50Mm Depth X 1.6Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays Bends With Perforation Not More Than 17.5%, , Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etcas Required 225 Mm Width X50 Mm Depth X 1.6 Mm Thickness , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 50 Sqmm , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1 / 2X 70 Sq. Mm ( 38Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 95 Sq. Mm ( 45Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 185 Sq. Mm ( 57Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 240 Sq. Mm ( 62Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 10 Sq. Mm ( 25Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 16 Sq. Mm ( 28Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 25 Sq. Mm ( 28Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 50 Sq. Mm ( 35Mm ) , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 16 Sq.M , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required.25 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required.10 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 50 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.25 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.16 Sq.M , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.10 Sqmm , Supplying And Providing Earth Clamps For Siemens / Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required.25Sq - 95Sq Mm With 20 Mm Wide X 1.20 Mm Thick Clip , Supplying And Providing Earth Clamps For Siemens / Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required. 4Sqmm-16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required2.65 Mm Copper Conductor ( 12 Swg ) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg ) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required4.00 Mm Copper Conductor ( 8 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.2.65 Mm ( 12 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 3.15 Mm ( 10 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 4.00 Mm ( 8 Swg ) , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal / Coke And Salt As Required. , Supply And Clamping The Following Size Of Strips On Surface Of Wall / Parapet / Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Color Washing Etc. As Required ( For Horizontal Run ) 25 X 3 Mm Copper Strip , Supplying, Threading, Laying And Jointing Of The Following Sizes Of B Class Gi Pipe With All Required Accessories In Ground In Trench As Protective Covering To Earth Leads40mm Dia , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Meter Below Ground As Strip Earth Electrode, Including Connection / Terminating With Nut, Bolt, Spring, Washer Etc. As Required. ( Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm ) , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required2.00 Mm Copper Conductor ( 14 Swg ) , Supply Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From Crca Sheet 0.5Mm Thickness With All Accessories And Lamps Directly On Wall And Giving Connections With 16 / 0.20 Mm 3 Core Pvc Insulated And Sheathed Round Copper Conductor Flex Wire Or Extending The Original Wiring And Giving Connections As Required 1200 Mm 1X20w Led Lamp With Box Type Fixture , Supply & Installation Of Light Fittings On Tw Round Block
Supply, Conveyance Installation Testing And Commissioning The Light Fittings Of Following Types Made Of Crca With 0.5Mm Thickness Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16 / 0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.1200Mm 1X20w Led Lamp With Box Type Fixture , Recess Mounted Led Luminaire With Full Diffuser Type Upto 36 W ( Max ) , 2X2 Led, Cool White, 5700K, White Powder Coated Crca Housing, Wipro Crco10r038hp57gl1 Or Bajaj Bzrsql 36W Gzi Cw Or Equivalent , Frame For Fixing Recess Mounted Led 2X2 Ft Luminaire 608 Mm X 608 Mm , Recess Mounted Circular Led Retrofit Downlighter, 15W, Powder Coated White Finish, Bpslr 15W Wh Bajaj Or Equivalent , Supplying And Fixing Of 6 / 7 W Pin Type Led Bulb In The Existing Angle Batten Etc As Required ( Philips, Wipro Or Similar Superior Make ) , Sitc Of 400Mm Sweep Meduim Duty Wall Fans With Metallic Vanes ( Make: M / S Almonard / Crompton / Bajaj Or Equivalent ) , Abc Powder Type Fire Extinguisher With Nabl Approval, Fights Class A, B, C And Electrically Started Fires. , Fire Extinguisher Carbon Di-Oxide Type With Nabl Approval , Charges For Dismantling The Existing Electrical Installations Complete Making Good The Damages Of The Wall And Conveying The Dismantled Materials To Store Etc As Required. , Numbering Of Ceiling Fan / Exhaust Fan / Fluorescent Fittings As Required. , Copper Pipe With Superlon Insulation For Suction And Discharge , Pvc Drain Pipe With Proper Insulation , Weather Proof 3 Core Copper Wire For Indoor To Outdoor Connecting Cable ( Size As Per The Requirement Of Ac Manufacturer ) , Core Cutting Charges Including Making The Surface Finished With Plastering And Painting, Making Good And Finishing With Matching Surface After Housing Pipe Etc. , Supporting Stand For Fixing Outdoor Unit ( Powder Coated ) , 4 Kva Voltage Stabilizer Wall Mount Type With Time Delay, High& Low Voltage& Thermal Overload Protection, Input Voltage: 170-220V, Output Voltage : 200-240V, High Voltage Cut Off : 240V, Efficiency: >95%, Frequency : 50Hz, V Guard Vg 500 Or Equivalent , Supply, Conveyance Testing And Commissioning Of 2 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar / Lg ( Dual Inverter Type ) / Voltas / Mitsubishi Or Superior Superior Brands, Cooling Capacity 6000 Kw / Hr With Rotary / Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500 / 450, Led / Lcd Display , Supply, Conveyance Testing And Commissioning Of 1 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar / Lg ( Dual Inverter Type ) / Voltas / Mitsubishi Or Superior Brands, Cooling Capacity 3000 Kw / Hr With Rotary / Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500 / 450, Led / Lcd Display , Sitc Of 19 Mm Thick Nitrile Rubber For Under Deckinsulation , Charges For Cutting Holes Suitable For Accommodating The Supply Ducts Including Plastering, Color Washing Etc. As Required. , Outdoor Unit Stand With Ribbed Rubber Pads , Electrical Cabling Between Indoor And Outdoor Units, With Required Size Cables / Wires ( Havells / Rr Kabel / V-Guard Frls Wires ) , Supply, Installation, Testing And Commissioning Upvc Drain Pipe 6Kg / Sq.Cmof Suitable Dia Connecting The Drain Pan Of The Indoor Units To Nearest Drain Point, With 12Mm Thick Closed Cell Elastomeric Insulation As Per Specification , Motorized Volume Control Damper For Individual Operation Of Ductable Split Air Conditioners , Supply And Fixing Of Canvas Connection And Ribbed Rubber Pads As Vibration Isolators , Providing And Fixing Of Thermal Insulation Lining With 13Mm Thick Nitrile Rubber Closed Cell Type With Adhesive, On Supply Duct. , Providing And Fixing Of Acoustic Duct Lining With 10Mm Thick Nitrile Rubber Open Cell Type Inside The Ducts , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminum Continuous Grilles 150Mm High For Return Air As Per Spec , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminimum Continuous Grilles 150 Mm High For Supply Air With Aluminum Damper As Per Spec , Supply, Installation, Testing And Commissioning Of Volume Control Duct Damper Made Of Extruded Aluminum For Ducts / Collars To Be Provided With Suitable Links, Lebers And Quadrants For Manual Control Of Volume Of Air Flow And For Proper Balancing Of The Air Distribution In The Main Duct Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc., As Per Specifications. , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges , Supports, Gi Rods , Anchor Bolts , Gi Nuts And Bolts, Pvc / Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof / Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 24G , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges , Supports, Gi Rods , Anchor Bolts , Gi Nuts And Bolts, Pvc / Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof / Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 22G , Supply And Providing Copper Earth Bus In The Panel Board , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A / 400A, 50 / 55 Ka ( Ics=100%Icu ) , 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Suitable De- Humidifier Units : Extraction At Least 35 Litres / Day, Compresor : Rotary, Air Flow : At Least 220M3 / Hr, Reputed Brand, Input 230Vac , Charges For Obtaining Electrical Inspectorates Approval Including Scheme Apporval And Final Approval And Regularizing With Kseb , 24-Port Gigabit Manageable Smart Network Switch With 2 Sfps. Rack Mountable , Patch Panel - 24-Port Patch Panel With Cable Tray. Rack Mountable , 4U Rack- Wall Mountable Including 4X 6Amp Power Distribution Box , Supply Of Branded 1Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 2Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 3Mtr Patch Cords With Cat 6 Cable. , Supply, Installation, Testing And Commissioning ( Sitc ) Of 11 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu / Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring ( Max 3M From Isolator ) And Control Cabling ( Indoor To Outdoor ) , Thermostat Wiring, High-Low Pressure Cut Out, Suitable For Three Phase 440V Supply Etc Complete As Required , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalised, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Busbars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale. ( 0-200 ) A Class 1 With 90 Deg Defl. Scale Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp Digital Multifunction Meter To Read V, A.Hz, Pf, Kwh Surge Protection Device ( Type1+2 ) Incomer 400A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 200A Copper Tpn Busbar Chamber With Copper Busbar Out Goings 250A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 160A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 100 A Fp Mccb Isolator-2Nos 63 A Fp Mccb Isolator-2Nos The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale. ( 0-200 ) A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp, Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh Incomer 250A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 250A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 200 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos. 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos. 63 A Fp Molded Case Circuit Breaker - 2 Nos.The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification , Additional Iron Shielding If Any , Mr Compatible Pipe For Medical Gas 12Mm , Mr Compatible Outlet , Mr Compatible Flowmeter With Humidifier , Mr Compatible Wall Mounted Suction Jar , Mr Compatible Probes , Mr Compatible Bed Head Panels For 6 Outlets , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale ( 0-200 ) A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp, Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh, Incomer 200A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos Out Goings 160 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos.The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specifications.Pn Busbar Chamber With Copper Busbar. ( Not Taken For Evaluation ) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switch Gears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh Incomer 160A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 160A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 125A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos %Icu= 25Ka ) - 2 Nos 63A Fp Mccb - 3 Nos The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification. ( Not Taken For Evaluation ) , Supply, Installation, Testing And Commissioning ( Sitc ) Of 8.75 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu / Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring ( Max 3M From Isolator ) And Control Cabling ( Indoor To Outdoor ) , Thermostat Wiring, High-Low Pressure Cut Out, Suitable For Three Phase 440V Supply Etc Complete As Required. ( Not For Evaluation ) , Small Fov Diffusion Like Focus, Zoomit, Zoom Diffusion ( Not Taken For Evaluation ) , Breast Spectroscopy Like Brease, Grace, Breast Spectro. ( Not Taken For Evaluation ) , Cartilage Assessment Like Cartigram, Mapit, Cartilage Assessment. ( Not Taken For Evaluation ) , Free Breathing Abdominal Imaging Like Ideal / Freezit ( Not Taken For Evaluation ) , Liver Imaging Package With Iron Quantification Like Ideal Iq / Liverlab Etc. ( Not Taken For Evaluation ) , Bone Imaging. ( Not Taken For Evaluation ) , Oncology Support Assembly For Head / Neck, Flex Coils For Neuro, Body & Pelvic Imaging. ( Not Taken For Evaluation )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Kerala View Result →
41.
Health and Family Welfare #10350409 Price Bid
Tender For supply of Digital Pet Ct Scanner As Per The Specification Except The Following , Advanced Dedicated Work Station For Pet-Ct With Oncology, Cardiology & Neurology Packages , Dual Head Injector , Dry Laser Imager , Full System Ups , Lead Glass , Additional Workstation With 1 Tb Storage Capacity , Dose Calibrator For Pet , Portable Survey Meter For Pet , Contamination Monitor For Pet , Personal Pocket Dosimeter , Tungsten Vial Shield For Carrying Isotopes , Syringe Shields For 2 & 5 Ml , Shielded Waste Decay Drum For Pet Radionuclide , L Bench With Lead Glass For Pet , Lead Lined Storage Cabinet , Interlocking Lead Bricks Including Corner Blocks , Shield Lead Carrier For Pet Doses , Light Weight Vinyl Lead Apron Of 0.5Mm Lead Equivalent , Foot Operayive Waste Bin For Pet , Dose Calibrator Shileding Ring For Pet , Dose Dispensing Unit , Decontamination Kit , Tongs 12, 18 And 24 Inch , Transport Container (Biodex Or Equivalent) , Cushioned Sofa Seats , Icu Trolley , Water Purifier (Hot And Cold) , Televisions 42 , Office Table , Dining Table With 10 Chair , Rubco Chairs , Modular Book Shelf With Glass Doors , Library Chair , Library Table , Jefferson Chair , Projector And Screen , Sound System With Fixed Mic And Wireless Mic , Pharma Refrigerator 400L , Induction Cooker , Non Revolving Chair , Refrigerator 260L , Emergency Trolley , External Lasers , 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , 15.12.1 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , 15.12.2Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead: Of Area Beyond 3 Sq. Metre , 15.23.1Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , 15.57 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge , 15.60 Disposal Of Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved , 2.31Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared , 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil , 50.2.25.1 Filling With Contractors Own Earth ( Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M As Per Direction Of Site Engineer-In-Charge , 50.4.1.1 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size) Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing For Leveling Coarse Of Floor And Roof Etc. , 5.2.2Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , 50.5.33.1Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M- 20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note: Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Up To Plinth Level , 50.5.5Reinforced Cement Concrete Work In Arches, Archribs, Domes, Vaults, Shells, Folded Plate And Roof Having Slope More Than 15 Degree Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size). , 50.5.33.2 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Above Plinth Level Upto Floor V Level , 5.22.1 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelmild Steel And Medium Tensile Steel Bars , 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platform , 5.9.1Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Foundations, Footings, Bases Of Columns, Etc For Mass Concrete , 5.9.2Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. , 5.9.5 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers , 2.34.1Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% , 2.35.1.1Diluting And Injecting Chemical Emulsion For Post -Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion):Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Litres / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300Mm Including Excavation Channel Along The Wall & Rodding Etc. Complete: With Chlorpyriphos /Lindane E.C. 20% With 1% Concentration , 24.2Providing And Fixing Double Scaffolding System (Cup Lock Type ) On The Exterior Side Of Building/Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40 Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Chakkus, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: - ( 1) The Evaluational Area Of The Scaffolding Shall Be Measured For Payment Purpose, (2) The Payment Will Be Made Once Only For Execution Of All Items Of Such Works. , 6.26.2Brick Work With Common Burnt Clay Selected F.P.S (Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand)Above Plinth Level And Upto Floor V Level , 50.6.1.2Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. , 50.6.1.8 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In: Cm 1:6 ( 1 Cement : 6 Coarse Sand Etc Complete , 50.6.3.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20x10 Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level For 10 Cm Thick Wall In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Including Cost Of Scaffolding Complete , Providing And Fixing Gi Chicken Wire Mesh 24 Gauge & 12 Mm Mesh And 300 Mm Width For Construction Joints And Chasing In Brick Work For Electrical Conduits Or Water Supply Pipes Including Cement Slurry And Pegs/Nails With Nailing Machine As Required Before Plastering Etc. Complete , 13.1.1Cement Plaster12 Mmof Mix: 1:4 ( 1 Cement : 4 Fine Sand) , 13.7.1Cement Plaster 12 Mmfinished With A Floating Coat Of Neat Cement Of Mix: 1:3 ( 1 Cement : 3 Fine Sand) , 13.12- 18 Mm Cement Plaster In Two Coats Under Layer 12 Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand )And A Top Layer 6 Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand) Finished Rough With Sponge. , 22.5Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : A) First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. B) Second Layer Of Slurry Of Cement @ 0.242 Kg /Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg/ Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. , 11.37Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600 X 600 Mm. , 11.41.3 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 800X 800 Mm , Od31976/2023_2024Providing And Fixing First Quality Vitrified Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 11.48.2 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg). Including Filling /Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , 11.48.3Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg). Including Filling /Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 800X800mm , 11.55.1 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , 50.9.1.1Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood , 50.9.2.1Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineerin - Charge. Using Anjili/ Jack Wood , 21.1.1.2 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately): For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , 21.1.2.2 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides , Od31977/2023_2024 Supplying And Fixing Flush Door Shutter, Shutter Of Required Size, Thickness 30Mm Thick, Finished With 1 Mm Laminate Of Approved Shade With 9 X 16 Clear Glass Vision Panels As Per Design Including Necessary Hinges , Od31978/2023_2024 Frosted Film - Supply And Installation Of 3M Make Frosted Film Pattern Throughout All The Internal Glass Panels Wherever Required Of Approx. 1.5 M Height As Per The Approved Pattern. , Od31979/2023_2024 Providing And Fixing Extruded Section Body Tubular Type Universal Hydraulic Door Closer(Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete , Od31980/2023_2024 Providing And Fixing 4.00 Mm Thick Acp Sheet For Cupboard Including All Cost, Conveyance, Labour Charges Etc Complete , 21.3.1 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , 12.45.2 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/ Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board Conforming To Is; 2095-Part I , 12.54.1 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Soffit With Help Of Soffit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Sixe38x12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C/C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms/Sqm (Both Side Inclusive), Fixing With Clip In Tiles Into Spring T With :Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25 Mm Height, ,Made Of G.I Sheet Having Galvanizing Of 100 Gms/ Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending . , 12.58.1 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Sections (Galvanized @ 120 Grams/ Sqm, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Space Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening Of Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process To Give Stable Crystalline Structure With Minimum Compressive Strength 225 Kg/ Sq. Cm, Bending Strength 100 Kg/Sq. Cm, Of Size 595X595 Mm, Having Perforation Of Dia, 10 Mm With Minimum Perforated Area 18% With Non Woven Tissue On The Back Side, Having An Nrc (Noise Reduction Coefficient) Of 0.85, With 50 Mm Thick Rockwool Of 48 Kg/Cum Backing. , 21.4.2Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is: 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors, Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer -In- Charge.With Brass Cover Plate Minimum 1.25 Mm Thickness , 21.13 Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , 50.9.11.1Providing And Fixing Thomson Multi Wood Board Or Equivalent Make Paneling 12 Mm Thick, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately) As Per The Direction Of Site Engineer-In-Charge. , 50.9.12.1 Providing And Fixing Thomson Multi Wood Board Or Equivalent Make, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer (Fittings To Be Paid Separately) As Per The Direction Of Site Engineer-In-Charge. , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.69.1 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work , 13.80Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 13.83.2Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour.Two Coats , 13.47.1Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) , 10.16.3 Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Electric Resistance Or Induction Butt Welded Tubes , Od31981/2023_2024Roofing Sheet With Sandwich Puf Roof Panel With 0.40 Mm Or Nearest Size Pre Painted Galvalume Sheet At Top & Bottom , 30 Mm Or Nearest Size Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete , Od31982/2023_2024 Wall Cladding With Sandwich Puf Wall Panel With 0.40 Mm Or Nearest Pre Painted Galvalume Sheet At Top &Bottom , 30 Mm Or Nearest Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete. , Od31983/2023_2024 Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses. , 17.81Providing And Fixing Floor Mounted, White Vitreous China Single Piece, Double Traps Syphonic Water Closet Of Approved Brand/Make, Shape, Size And Pattern Including Integrated White Vitreous China Cistern Of Capacity 10 Litres With Dual Flushing System, Including All Fittings And Fixtures With Seat Cover, Cistern Fittings, Nuts, Bolts And Gasket Etc Including Making Connection With The Existing P/S Trap, Complete In All Respect As Per Directions Of Engineer-In-Charge. , 17.2.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , 17.7.1 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , 50.17.1.2 Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge , 50.17.1.5Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 50.17.1.1 Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 17.31 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Od33878/2023_2024 Supplying And Fixing Stainless Steel Mirror Finished H Type Handles Including Material Cost, Conveyance And Fixing Charges Etc Complete. , 50.18.7.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 15Mm Dia 12Kgf/Cm2 -Internal Work- Exposed On Wall , 50.18.7.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 10Kgf/Cm2- Internal Work - Exposed On Wall , 50.18.8.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer- In- Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 12 Kgf/ Cm2 , 50.18.8.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 32 Mm Pipe 10Kgf/Cm2 , 50.18.8.9.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 110 Mm Pipe 6Kgf/Cm2 , 50.18.9.8.2 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching And Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 4 Kgf/Cm2 , 18.7.2 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer -In-Charge. Internal Work - Exposed On Wall20 Mm Nominal Outer Dia Pipes , 18.7.3Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer -In-Charge. Internal Work - Exposed On Wall 25 Mm Nominal Outer Dia Pipes , 18.8.2Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes& Fittings, With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20 Mm Nominal Outer Dia Pipes , 18.8.3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes& Fittings, With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 25 Mm Nominal Outer Dia Pipes , Od31984/2023_2024 Providing And Fixing 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Pvc Hollow Section Of Size 59 X 24 Mm And Wall Thickness 2 Mm With Inbuilt Edging On Both Sides. The Styles And Rails Mitered And Joint At The Corners By Means Of M.S. Galvanized/Plastic Brackets Of Size 75 X 220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Fixing Galvanized M.S. Tube Of Size 20 X 20 Mm And 1 Mm Wall Thickness. The Lock Rail Made Up Of H Section, A Pvc Hollow Section Of Size 100 X 24 Mm And 2 Mm Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanized M.S. U Cleats. The Shutter Frame Filled With A Pvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Fixing Horizontally 6 Mm Galvanized M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). , Od31985/2023_2024 Supplying And Fixing Name Board Of Various Sizes Using Foam Sheet Board Including Lettering As Per The Direction Of Departmental Officers Including Cost, Conveyance And Fixing Charges Etc Complete. 45X14cm Size , Od31986/2023_2024 Supplying And Fixing The Name Board Of Size 80 X 30 Using Acp Board With Acrylic Lettering Including Cost, Conveyance And Labour Charges For Lettering And Fixing Etc Complete , Od31987/2023_2024 Supplying And Fixing Inaugration Board Using Granite Slab Including Lettering As Per Direction Of Departmental Officers Including Cost Of Granite, Lettering And Fixing Charges Etc Complete. Size: 100X84cm , Supplying And Fixing Skylight Of Size 1.2Mx 1.8M With Designed Acrylic Sheet Including 4 Numbers Led Tube As Per The Direction Of Engineer In Charge , Od31989/2023_2024 Computer Chair The Medium Back Adjustable Revolving Chair Made With Mesh Back Within Built Handle In The Nylon Finish, The Back Is Designed Extra Lumber Support. The Seat Have Provided Seat Cover In Pp Made With 12Mm Hot Pressed Ply And Pu Moylded Foam. The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking. The Base And Pin Wheels Are Made In The Nylon. 120Mm H Gas Lift Should Be Provided With Tower Bellow , Od31990/2023_2024 High Back Chair Made With Feather Foam Seat & Mesh Back With Lumber Support. , The Gas Lift Mechanism Should Be Tested As Per Bifmastandards. The Pedestal Should Be Five Legged Injection Mouldedin Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, It Should Have Synchro Any Anglelocking Arrangement , Od31991/2023_2024Providing And Fixing Trap Doors For Access To The Areas Above False Ceiling. The Trap Door Shall Have An External Frame Made Of Powder Coated Aluminium Channel On Which The Shutter Is Hinged. Shutter Shall Be Made 3 Mm Thick Acp Sheet Shutter External Frame Of Shutter Made Of Powder Coated Aluminium Channel. Concealed Heavy Duty Hinges Shall Be Used To Mount The Shutters And Locking Shall Be Provided. The Shutter Shall Be Moulded In Level With The False Ceiling Forming A Groove All Around. Sufficient Number Of Hinges And Locks Shall Be Provided To Avoid Sagging Of The Shutter. Key Also Shall Be Supplied. No Extra Rate Shall Be Provided For Suspenders Or Frame Works All Round For Linking The Trap Door To Gyp Board /Any Other False Ceiling. The Rate Including All Labour Charges ,Material Charges Ect Complete. , Od33559/2023_2024 Supplying And Laying Polyster , Washable And Stainfree Cloth(Bio-Active Fabric Washable Germfree-Suitable For Icu Room) Curtain System With Maximum Curtain Cloth Height 230Cm (Top 30 Cm White Colour Net And 200Cm Light Blue Colour As Per Approval) Stitching With Stifiner Tape,Pleats,Ironing And Laying In Icu Room Around Each Bed Using Pvc Runner With Hooks&Stopper For Hanging/Sliding Etc. As Per The Direction Of Engineer In Charge Including Conveyance To Site , Laying In Line And Level , Sealing All Cuttings In False Ceiling With Powder Coated Ms Cup ,All Leads And Lifts Including All Labour Charges Etc. Complete.(Unpleated Length Of The Cloth Maesurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measuremnet)/Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube Hanging Support Of Required Length (App. Length 1.10M) One End Fixing From Slab By Using 6Mm Dia. Expansion Bolt At A Distance Not More Than 2 M, C/C Down End Fixed To Powder Coated Aluminium Channel Frame 45X20mm X1mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level ,Sealing All Gaps In False Ceiling Due To Hanging Supports ,All Leads And Lifts, Including All Labour Charges Etc. Complete. , Od33560/2023_2024 Providing And Fixing Vertical Blinds As Per The Direction Of Engineer In Charge , Furniture& Other Works: Lead Lined Door Shutters: 2Mm Lead Lined Door Shutterswithsolid Cored(30Mm) Lead(2Mm) Lined Flush Door Side Hung Two Rebated Shutters With Plywood(6Mm) & Laminated (1Mm) On Both Sides And All Accessories ( Ss Hinges (4 Nos), Tower Bolt , Ss Handles Etc..) , Lead Lined Door Frames: Lead(2Mm) Lined Flush Door Side Hung Single Shutter With Plywood(6Mm) &Laminated (1Mm) On Both Sides And All Accessories(Lead Sheet Should Overlap Door Frame & Wall )Includingproviding Wood Work In Frames Of Doors And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length , Using Good Quality Anjili Wood /Jack Wood (Frame Size 12 Cm X 8 Cm) , Wood Frame For Fixing Lead Glass (Lead Sheet Should Overlap Door Frame & Wall ) , Steel Cupboard (Godrej) For Storage 6Ft Tall 3 Feet Width , Providing And Fixing 2.0Mm Th. Vinyl Floor With Rubber Based Adhesive Over Clean And Smooth Surface Including Finishing By Rolling A Light Roller All Complete. , Wiring For Group Controlled (Looped) Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point ( Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. Group C , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X 2.5 Sq. Mm + 1 X 2.5Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 4 X 6 Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq.Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 2.5Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel/ Pvc Conduit As Required. 3 X 4 Sq. Mmm , Switches & Sockets: Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5/6 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 2 Way 5/6 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 20/25 Amp Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 20/25 Amp Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.1 Or 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 6 Module (200Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 8 Module (125Mmx125mm) , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Ceiling, Wall And Exhaust Fans: Extra For Fixing The Louvers/ Shutters Complete With Frame For An Exhaust Fan Of All Sizes , Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Color Washing Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep , Sitc Of 400Mm Sweep Meduim Duty Wall Fans With Metallic Vanes (Make: M/S Almonard/ Crompton/Bajaj Or Equivalent) , Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizes Using Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With 16/0.20Mm Pvc Insulated And Pvc Sheathed 650/1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 1200Mm Sweep -5Star Rated Bldc Ceiling Fan Complete With 300Mm Down Rod , Canopies, Shackles And Blades Working On 230V/240V Single Phase A/C , Supply Of 300/305 Mm Sweep Light Duty Exhaust Fan In Metal Frame Working On230 Va/C , Db Mcb Switch Gear: Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way (8+12) - Three Phase Double Cover (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way (8+18) - Three Phase Double Cover (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way (8+12) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way (8 + 18) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) , Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface/ Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/ Rccb/Isolator)2+12 Way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, (Three Phaseand Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Dbcomplete With Connections, Testing And Commissioning Etc. Asrequired. 63 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , Supplying And Fixing Following Rating, Three Pole, Mcb63 A Rating, 3 Pole, Mcb , Supplying And Fixing Following Rating, Three Pole, Mcb 40 A Rating, 3 Pole, Mcb , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required 100 Amp, 30 Ka 4 Pole , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A/400A, 50/55 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required. 16A -100A, 35/36 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Cable Supply Laying And Termination: Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm (Clamped With 25X3mm Ms Flat Clamp) , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc.As Required.4 Core 185 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 240 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 300 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 25 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 50 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 10 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 16 Sq Mm With Factory Made Clamp , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 70 Sq Mm , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armoured Aluminum Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required. 3.5 Core 70 Sq Mm , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.225Mm Width X 50Mm Depth X 1.6Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required 225 Mm Width X50 Mm Depth X 1.6 Mm Thickness , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 50 Sqmm , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1/2X 70 Sq. Mm (38Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1/2X 95 Sq. Mm (45Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1/2X 185 Sq. Mm (57Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1/2X 240 Sq. Mm (62Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 10 Sq. Mm (25Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 16 Sq. Mm (28Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 25 Sq. Mm (28Mm) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 50 Sq. Mm (35Mm) , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required.16 Sq.M , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 25 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required.10 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The Following Sizes As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 50 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 25 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 16 Sq.M , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 10 Sqmm , Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required.25Sq - 95Sq Mm With 20 Mm Wide X 1.20 Mm Thick Clip , Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required. 4Sqmm-16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip , Earthing & La: Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required 2.65 Mm Copper Conductor (12 Swg) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required 3.15 Mm Copper Conductor ( 10 Swg) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required 4.00 Mm Copper Conductor ( 8 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 2.65 Mm (12 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 3.15 Mm (10 Swg) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 4.00 Mm (8 Swg) , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal/ Coke And Salt As Required. , Supply And Clamping The Following Size Of Strips On Surface Of Wall/ Parapet/ Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Color Washing Etc. As Required (For Horizontal Run) 25 X 3 Mm Copper Strip , Supplying, Threading, Laying And Jointing Of The Following Sizes Of B Class Gi Pipe With All Required Accessories In Ground In Trench As Protective Covering To Earth Leads 40Mm Dia , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Meter Below Ground As Strip Earth Electrode, Including Connection/ Terminating With Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm) , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required 2.00 Mm Copper Conductor ( 14 Swg) , Providing And Fixing Of Lightning Conductor Finial, Made Of 25 Mm Dia 300 Mm Long, G.I. Tube,Having Single Prong At Top, With 85 Mm Dia 6 Mm Thick G.I. Base Plate Including Holes Etc. Complete As Required. , Fixing Of Lightning Conductor Finial (Single Prong) With Base Plate Including Holes Etc. Complete As Required , Jointing Copper / G.I. Tape (With Another Copper/ G I Tape, Base Of The Finial Or Any Other Metallic Object) By Riveting / Nut Bolting/ Sweating And Soldering Etc As Required. , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required.(For Horizontal Run) , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required.(For Vertical Run) , Fixing Of Copper/ G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required.(For Horizontal Run) , Fixing Of Copper/ G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required.(For Vertical Run) , Providing And Fixing Testing Joint, Made Of 20 Mm X 3 Mm Thick G.I. Strip, 125 Mm Long, With 4 Nos. Of G.I. Bolts, Nuts, Chuck Nuts And Spring Washers Etc. Complete As Required. , Providing And Laying G.L. Tape 32 Mm X 6 Mm From Earth. Electrode Directly In Ground As Required , Laying Copper/ G.I. Tape 32 Mm X 6 Mm From Earth Electrode Directly In Ground As Required. , Led Fixtures S&F: Supply Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From Crca Sheet 0.5Mm Thickness With All Accessories And Lamps Directly On Wall And Giving Connections With 16/0.20 Mm 3 Core Pvc Insulated And Sheathed Round Copper Conductor Flex Wire Or Extending The Original Wiring And Giving Connections As Required 1200 Mm 1X20w Led Lamp With Box Type Fixture , Supply & Installation Of Light Fittings On Tw Round Block
Supply, Conveyance Installation Testing And Commissioning The Light Fittings Of Following Types Made Of Crca With 0.5Mm Thickness Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16/0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.1200Mm 1X20w Led Lamp With Box Type Fixture , Supplying And Fixing Of Recess Mounted Led Luminaire With Full Diffuser Type Upto 36 W (Max), 2X2 Led, Cool White, 5700K, White Powder Coated Crca Housing, Wipro Crco10r038hp57gl1 Or Bajaj Bzrsql 36W Gzi Cw Or Equivalent , Frame For Fixing Recess Mounted Led 2X2 Ft Luminaire 608 Mm X 608 Mm , Supplying And Fixing Ofrecess Mounted Circular Led Retrofit Downlighter, 15W, Powder Coated White Finish, Bpslr 15W Wh Bajaj Or Equivalent , Supplying And Fixing Of 6 / 7 W Pin Type Led Bulb In The Existing Angle Batten Etc As Required (Philips, Wipro Or Similar Superior Make) , Supply Of 18W Led Downlighter With A Nominal System Lumen Output Of Minimu 500 Lumens. System Wattage Should Not Exceed 18W. The Luminaire Shall Have A Rated System Lifetime Of 50,000 Burning Hours. The Luminaire Should Have A Color Temperature Of 5700K And Cri>80. Driver Of The Luminaire Shall Have Thd < 10% And Pf > 0.95. Housing Shall Be Crca Powder Coated With Pmma Diffuser.Driver Shall Have 85% Efficiency. Similar To Wipro Make Ld06-221-Xxx-57-Xxor Eqivalent , Supply Of 12W Led Downlight, High Efficiency With A Nominal System Lumen Output Of 760 Lumens. Luminaire Wattage Should Not Exceed 12W. The Luminaire Should Have Acri > 80. Driver Of The Luminaire Shall Have Thd < 10% And Pf > 0.9. Slim Led Batten In Aluminium Housing And Decorative End Caps. Robust Driver With Wide Voltage Range 100-240 Volts And Inbuilt Protection. Aesthetically Designed Mirror Led Light Fixture Of 4000 K,Of Surface Mounting Which Provides Soft-Light And Glare Free Symmetrical Illumination. Simialr To Model Number Ld07- 131-060-40-Wh Of Wipro Make Or Equivalent. , Fire Alarm, Fire Extinguisher & Safety: Abc Powder Type Fire Extinguisher With Nabl Approval, Fights Class A, B, C And Electrically Started Fires. , Fire Extinguisher Carbon Di-Oxide Type With Nabl Approval , Supplying, Installing, Testing And Commissioning Ofconventionalsingle Action Manual Call Point , Supplying, Installing, Testing And Commissioning Of Conventional Hooter With Builtin Flasher Lightwith Base Ul/En Listed. , Supplying, Installing, Testing And Commissioning Of 2 Core X 1.5 Sqmm Fr Pvc,Multistrand Copper Cu Ar Cable Confirming To Is Standards And Specifications. Make: Polycab / Century , Providing Installating, Connecting, Testing And Commissioning Heat Detectors Type With Mounting Base, Blinking Ledas Required Complete And Integration , Supplying, Installation, Testing And Commissioning Ofconventional Photoelectric Smoke Detectorsas Required To Connect With Existing System , Providing And Fixing Of Response Indicator As Required , Conventional Single -Zone Fire Panel With Batteries, Battery Charger Mimic Diagram Etc , Supply And Providing2/3 Mm Thick Sythetic Type And 1 M Wide Electrical Grade Chequered Type Rubber Mat To Withstand 3.3 Kv Dielectric Strength Conforming To Is 5429/1969. , Supply And Providing Laminated First Aid Chart Duly Framed And Placed In A Conspicuous Location For Clear Vision. , Numbering & Lettering: Numbering Of Ceiling Fan / Exhaust Fan/ Fluorescent Fittings As Required. , Hvac Works: Copper Pipe With Superlon Insulation For Suction And Discharge , Pvc Drain Pipe With Proper Insulation , Weather Proof 3 Core Copper Wire For Indoor To Outdoor Connecting Cable (Size As Per The Requirement Of Ac Manufacturer) , Core Cutting Charges Including Making The Surface Finished With Plastering And Painting, Making Good And Finishing With Matching Surface After Housing Pipe Etc. , Supporting Stand For Fixing Outdoor Unit(Powder Coated) , 4 Kva Voltage Stabilizer Wall Mount Type With Time Delay, High& Low Voltage& Thermal Overload Protection, Input Voltage: 170-220V, Output Voltage : 200-240V, High Voltage Cut Off : 240V, Efficiency: >95%, Frequency : 50Hz, V Guard Vg 500 Or Equivalent , Supply, Conveyance Testing And Commissioning Of 2 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar/Lg(Dual Inverter Type)/Voltas/Mitsubishi Or Superior Superior Brands, Cooling Capacity 6000 Kw/Hr With Rotary/Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500/450, Led/Lcd Display , Supply, Conveyance Testing And Commissioning Of 1 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar/Lg(Dual Inverter Type)/Voltas/Mitsubishi Or Superior Brands, Cooling Capacity 3000 Kw/Hr With Rotary /Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500/450, Led/Lcd Display , Sitc Of 19 Mm Thick Nitrile Rubber For Under Deckinsulation , Charges For Cutting Holes Suitable For Accommodating The Supply Ducts Including Plastering, Color Washing Etc. As Required. , Outdoor Unit Stand With Ribbed Rubber Pads , Electrical Cabling Between Indoor And Outdoor Units, With Required Size Cables/Wires(Havells/Rr Kabel/V-Guard Frls Wires) , Supply, Installation, Testing And Commissioning Upvc Drain Pipe 6Kg/Sq.Cmof Suitable Dia Connecting The Drain Pan Of The Indoor Units To Nearest Drain Point, With 12Mm Thick Closed Cell Elastomeric Insulation As Per Specification , Motorized Volume Control Damper For Individual Operation Of Ductable Split Air Conditioners , Supply And Fixing Of Canvas Connection And Ribbed Rubber Pads As Vibration Isolators , Providing And Fixing Of Thermal Insulation Lining With 13Mm Thick Nitrile Rubber Closed Cell Type With Adhesive, On Supply Duct. , Providing And Fixing Of Acoustic Duct Lining With 10Mm Thick Nitrile Rubber Open Cell Type Inside The Ducts , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminum Continuous Grilles 150Mm High For Return Air As Per Spec , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminimum Continuous Grilles 150 Mm High For Supply Air With Aluminum Damper As Per Spec , Supply, Installation, Testing And Commissioning Of Volume Control Duct Damper Made Of Extruded Aluminum For Ducts/Collars To Be Provided With Suitable Links, Lebers And Quadrants For Manual Control Of Volume Of Air Flow And For Proper Balancing Of The Air Distribution In The Main Duct Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc., As Per Specifications. , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges ,Supports, Gi Rods , Anchor Bolts ,Gi Nuts And Bolts, Pvc/ Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof /Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 24G , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges ,Supports, Gi Rods , Anchor Bolts ,Gi Nuts And Bolts, Pvc/ Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof /Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 22G , Supply, Installation, Testing And Commissioning (Sitc) Of 11 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu/Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring(Max 3M From Isolator) And Control Cabling(Indoor To Outdoor),Thermostat Wiring, High-Low Pressure Cut Out,Suitable For Three Phase 440V Supply Etc Complete As Required , Suitable De- Humidifier Units : Extraction At Least 35 Litres/Day, Compresor : Rotary, Air Flow : At Least 220M3/Hr, Reputed Brand, Input 230V Ac , Ssb And Ups Panel:Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale (0-200)A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp, Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh, Incomer 200A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos Out Goings 160 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos.The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specifications.Pn Busbar Chamber With Copper Busbar. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switch Gears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh Incomer 160A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 160A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 125A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos %Icu= 25Ka) - 2 Nos 63A Fp Mccb - 3 Nos The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification. , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A/400A, 50/55 Ka (Ics=100%Icu), 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Statutory Approvals: Charges For Obtaining Electrical Inspectorates Approval Including Scheme Apporval And Final Approval And Regularizing With Kseb , Elv: Supplying And Drawing Following Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor,Unarmored Telephone Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 2 Pairs , Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Telephone Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Tv Antenna Socket Outlet , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 25Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 32Mm , Supplying And Laying Of Following Pair Armoured Telephone Cable Through Wall/Tray With All Acessories As Required For Complete Installation And As Instructed By Engineer In Charge/Consultant And Making Good All Damages Made For Installation. 5 Pair , Kronebox-Supply,Erection,Testingandcommissioningoffollowingpairkronewithbox Including Mounting Frame, Enclosure Of Isi Grade With Lockable Front Cover With All Accessories Required For For Complete Installation In Wall As Directed By The Engineer In Charge. 10Pair , Supply, Installation, Testing And Commissioning Of Basic User Phone With Necessary Connection As Required For Complete Installation As Directed By The Engineer In Charge. , Supplying And Drawing Of 6 Core Sm Armoured Optical Fibre Cable (Ofc) Through Wall / Tray With All Acessories As Required For Complete Installation And As Instructed By Engineer In Charge / Consultant And Making Good All Damages Made For Installation. , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required 1 Run Of Cable , Cat 6 Rj 45 Computer Jack Modular Socket Outlet , Supplying And Drawn Of Utp 4 Pair Cat 6A Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required 1 Run Of Cable , Cat 6A Rj 45 Computer Jack Modular Socket Outlet , 24-Port Gigabit Manageable Smart Network Switch With 2 Sfps. Rack Mountable , Patch Panel - 24-Port Patch Panel With Cable Tray. Rack Mountable , 9U Rack- Wall Mountable Including 4X 6Amp Power Distribution Box , Supply Of Branded 1Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 2Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 3Mtr Patch Cords With Cat 6 Cable. , Dismantling Works : Charges For Dismantling The Existing Electrical Installations Complete Making Good The Damages Of The Wall And Conveying The Dismantled Materials To Store Etc As Required. , Cctv & Public Addressing System: Supply, Installation, Testing And Commissioning Of Ip Based 3.6 Mm Fixed Lens, 2Mp Resolution, H.264 / H.265, 1/2.8 Progressive Scan Cmos Day/Night, Ir Dome Poe Enabled Camera,20 To 30 Meters Ir Range, 120 Db Digital Wdr With All Connectors And Necessary Accessories For Mounting In False Ceiling As Required For Complete Installation As Directed By Engineer In Charge. , Ceiling Mounted Speaker - Supply, Fixing, Testing And Commissioning Of Ceiling Mount Metal Grille Speakers With Inbuilt Line Matching Transformer With Power 6W With All Accessories Required For Complete Instllation As Required. , Wall Mounted Speaker - Supply, Fixing, Testing And Commissioning Of Wall Mounted Speakers With Inbuilt Line Matching Transformer With Power 9Wwith A Volume Controller To Adjust The Volume Individually As Per The Requirement With All Accessories Including Wall Mounting Kit Required For Complete Instllation. The Volume Controller Shall Be Fixed Separately As Per The Site Condition For Individual Control. Cost Inclusive Of Necessary Interconnection Including Conduit, Connection Wire Etc , Mechanical Ventillation System: Axial Fans: Supply, Installation, Testing And Commissioning Direct Driven Axial Flow Fans Suitable Formountingonwallorductinstandardgalvanized/Powdercoatedsteelconstructionwith Requiredrating,Static,Singlemotorandflexibleconnectiontoconnectwithducting/Plenum, Louvers With Birdscreen. The Cost Inclusive Of Ducts Required As Per The Layout. 50 - 250 Cfm , Supply, Installation, Testing And Commissioning (Sitc) Of 8.75 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu/Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring(Max 3M From Isolator) And Control Cabling(Indoor To Outdoor),Thermostat Wiring, High-Low Pressure Cut Out,Suitable For Three Phase 440V Supply Etc Complete As Required (Not Taken For Evaluation) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalised, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Busbars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale. (0-200)A Class 1 With 90 Deg Defl. Scale Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp Digital Multifunction Meter To Read V,A.Hz,Pf,Kwh Surge Protection Device (Type1+2) Incomer 400A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 200A Copper Tpn Busbar Chamber With Copper Busbar Out Goings 250A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 160A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 100 A Fp Mccb Isolator-2Nos 63 A Fp Mccb Isolator-2Nos The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification (Not Taken For Evaluation) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall/Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel(Required For Short Circuit Rating, Temperature Rise And Ip Classification) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. 4A Sp Mcb (0-500)V Class 1 With 90 Deg Defl. Scale. (0-200)A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200/5 A 5 Va Class .5S Cts On/Off Indication Lamp, Digital Multi-Function Meter To Read V,A.Hz,Pf,Kwh Incomer 250A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) -1 Nos 250A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 200 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 1 Nos. 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link (Ics =100%Icu= 25Ka) - 2 Nos. 63 A Fp Molded Case Circuit Breaker - 2 Nos.The Panel Shall Be Top Entry/Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification (Not Taken For Evaluation)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
42.
Public Administrative Department #10348518 Price Bid
Tender For Maintenance Of Rajkot Circle Office Building Rajkot For Year 2025-26; 1 Execution of work under following items 2 Laying & fixing of conduit, cutting, glueing/jointing, fixing saddles/spacers, making good wall/ceiling penetrations, testing continuity and final inspection — per meter (includes testing) as per instruction of engineer in-charge. (complete SITC) 3 Removing dry/oil bound distemper and waterproof paint by scrapping, sand papering & preparing surface smooth (Interior walls – long & partition walls). 4 Supply of PVC conduit pipes (ISI marked, BEC / AKG / Precision / Pressfit / Steel Craft) and fittings (elbows, couplers, bends, boxes) — per meter. Material shall be of approved brand or equivalent approved by Engineer-in-Charge. (complete SITC) 5 Applying one coat of ready-mixed red-oxide zinc chromate primer on steel/galvanized iron work (surface prep by wire-brushing included). 6 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 m lead (for 10–25 mm thick tiles) 7 Removal of existing tiles and excavation of protruding tree roots, filling void with compacted sand/aggregate and repairing base with cement mortar. 8 Exterior painting for boundary wall with synthetic enamel paint of approved brand to give even shade. 9 Consumables & minor items per point: screws, PVC clips, tapes, cable ties, sealing compounds, short patch cords, final cleaning 10 Silver painting over existing partitions (aluminium paint) to give even shade. 11 Spray painting over existing almirahs (steel work) with deluxe multi-surface paint; two coats @ 0.9 L/10 sqm over undercoat of primer @ 0.8 L/10 sqm. 12 Waterproof cement paint above dado (2.1 m to 2.5 m height) + Acrylic emulsion on ceiling incl. edges 13 Interior walls finishing with deluxe multi-surface waterproof paint system using primer as per manufacturer’s specification (two or more coats). 14 Finishing walls with water proof cement paint (two coats) of approved brand and shade. 15 Finishing with epoxy paint (two or more coats) on steel work (over primer) for window grills and MS gates, including surface prep and scaffolding. 16 Supply, Fixing & wiring: mounting plate, connection to point wiring, ferruling, testing & cleaning (per unit) (Labour and testing included) 17 Providing and fixing CPVC distribution pipe (20/25 mm dia) for outlet and internal distribution: Supply and fix CPVC pipe with fittings (tees, elbows, bends, reducers, clamps) from rooftop tanks to toilet blocks, wash basins & taps; include wall drilling, sealing, testing, flushing, and making good disturbed surfaces with cement mortar; pressure tested to 10 kg/cm². Material should be of approved brand by engineer in-charge. 18 P&F CPVC pipe 20/25 mm dia (supply) — ISI/approved CPVC pipe, per meter supply -inclusive of all fittings such as elbows, tees, unions, couplers, sockets, angle valves, stop valves, bib taps, outlet taps (chrome plated), pipe support and all fittings complete 19 Applying 12 mm cement plaster (single coat) on both faces of partition up to 3.5 m height, including hacking/keys where required, on walls, partition walls etc as per direction of engineer in-charge 20 Supply and fixing Coat / robe hooks (SS) — 2 nos. 21 Supply and fixing of switches & sockets (Anchor Roma / Legrand Myrius / Schneider Livia / GM / Havells Crabtree), with modular plates and mounting boxes. Material shall be of approved brand or equivalent approved by Engineer-in-Charge. 22 Installation: Conduit routing, pulling & laying of wires, fixing boxes, switch & socket fixing, terminations, ferruling, earthing connection at point; including testing & commissioning of points (insulation/continuity) 23 Supply and fixing of Coat hooks / robe hooks (stainless) — supply & fixing of 2-hook stainless robe/coat hook set. - Two hooks per door/near entrance; SS finish; fixing with screws & plugs. 24 Supply and fixing of CPVC pipe 32 mm dia (supply) — ISI/approved CPVC pipe, per meter supply - inclusive of all fittings such as elbows, tees, unions, couplers, sockets, angle valves, stop valves, bib taps, outlet taps (chrome plated), pipe support and all fittings complete 25 Providing and fixing CPVC supply pipe (32 mm dia) for inlet lines: Concealed / open fixing on walls, floors or ceilings with CPVC fittings (elbows, tees, unions, reducers, bends, clamps, supports @1.5 m intervals), testing for leakage at 10 kg/cm² and flushing complete. Lines connect UG tank → booster pump → 500 L & 2000 L tanks and other locations as required. Material should be of approved brand by engineer in-charge. 26 Main circuit connection from DB to sub-circuit — Supplying and laying 3-core × 2.5 sq.mm FRLS copper wire in 25 mm PVC heavy-duty conduit (ISI-marked), with saddles and fittings, from main DB to lighting/exhaust/hand dryer circuit - inlcusive of Earthing & continuity connection — Providing 2-core × 2.5 sq.mm green FRLS copper wire from DB to all metallic fixtures (fans, lights, hand dryer), complete with earthing links, screws, and testing for continuity as per IS:3043. 27 Polymer-modified cementitious waterproof coating over floor and 300 mm skirting as per direction of engineer in-charge 28 Repair of loose plaster, cracks, and honeycombs: Raking out weak mortar and repairing surface defects with cement mortar 1:3 (1 cement : 3 coarse sand); applying bonding coat and finishing smooth; curing for minimum 48 hours. (including arrangement for water) 29 Repairs to plaster 12–20 mm thick in patches under 2.5 sqm using 1:4 mortar, cutting, raking joints and finishing smooth. 30 Suction & Delivery GI/HDPE Pipe with Fittings (50 mm dia): Supply, cutting, threading, jointing, laying and supporting suction (≈10 m) & delivery (≈15 m) pipes from UG tank to rising main including bends, elbows, reducers, flanges, painting with red oxide primer and two coats enamel. Material should be of approved brand by engineer in-charge. 31 Fixing, connection to point wiring, testing, commissioning, leveling and final cleaning per unit (complete installation and testing as per instruction of engineer in-charge) 32 Towel rail / ring (stainless steel) — supply & fixing of SS towel rail / ring (chrome finish), heavy duty brackets and plugs. - SS 304 finish; mounting on tile with rubber grommet. 33 Supply of materials for point wiring — FRLS PVC insulated copper wire (Finolex / Polycab / RR Kabel / Havells / KEI), rigid PVC conduit & accessories (BEC / AKG / Precision / Pressfit), modular switch plates (Anchor / Schneider / Legrand / GM). Material shall be of approved brand/make from above list or equivalent as approved by Engineer-in-Charge. 34 Fixing, point wiring, balancing, testing & commissioning per fan (Installation & commissioning included) 35 SS dustbin (pedal / lid) — supply & fixing — stainless steel (SS 304), 12–15 L capacity, wall bracket or floor standing. - One dustbin per cluster; provide anti-corrosion polish & mounting. 36 Construction of Brick wall of 230 mm thick — providing & laying F.P.S. bricks in cement mortar up to 3.5 m height, as per directions of engineer in-charge 37 Glazed ceramic wall tiles up to 2.1 m height — supply & fixing in 1:4 cement mortar, pointing as per direction of engineer in-charge 38 Anti-skid ceramic floor tiles 300×300 mm — supply & fixing in 20 mm CM 1:4, jointing & grouting; . - (Tiles as per approved makes (Kajaria / Somany / Nitco / Johnson / Asian or equivalent as approved by engineer-incharge). Adhesive, joints & cutting included. 39 Point wiring for lighting/exhaust/hand dryer (6 points) — PVC conduit, FRLS Cu wire, modular switches, ceiling rose, termination, testing. 40 False ceiling — suspended grid (GI channels / hangers) with 595×595 mm PVC ceiling panels or equivalent PVC/GI panels, complete with edge trims and cut-outs for fixtures. For area ≈ 5.0 m². Approved makes: Armstrong / Gyproc / USG Boral (ceiling systems) or approved PVC panel. - Includes hangers, wires, screws, grilles & fixing; drop ~300 mm. 41 Relaying new tiles using 40% old tiles — double charge vitrified polished finish (600×600 mm). 42 Glass replacement in windows with 5 mm float glass panes, including removal of damaged panes, cleaning rebates, fixing with putty/clips and finishing. 43 Supply and fixing of LED fixtures (36W) (Philips / Wipro / Havells / Bajaj / Crompton) including drivers, mounting brackets and wiring accessories — per unit. Material shall be of approved brand or equivalent approved by Engineer-in-Charge. 44 Silicone sealant, making good & final cleaning (LS) — sealant at all junctions, touch-up paint, final cleaning & disinfection prior to handover. - Includes consumables and labour for final handover. 45 Disposal of silt, debris, and foreign matter: Collection, loading, and removal of all dirt, silt, sludge, and waste materials from tank and surroundings within 50 m lead as directed by Engineer-in-Charge. (includes loading/unloading labour, and tools) 46 Final washing, drying, and refilling for test: Rinsing with clean water twice, drying for 6 hours, and refilling tank partially to check for leakage or seepage. (include water and labour) 47 SS dustbin (small) + grab rail / grab bar (stainless steel) supply & fixing (accessibility requirement). - SS 304 48 Soap dispenser (wall mounted, stainless / ABS pump) — supply & fixing, refillable type, anti-vandal. - Installed at basin height; includes adhesive & screws, sealing. 49 Disinfection using bleaching powder solution: Preparing and applying fresh solution (0.5 g/litre concentration) of bleaching powder (30% available chlorine); brushing and spraying entire surface uniformly as per instuction of engineer in-charge 50 Pressure Gauge Assembly & Accessories: Bourdon-type 0–10 kg/cm² with isolation valve mounted on delivery line, including brass fittings, air-release valve (15 mm), reducers and testing. The material should be IS:3624 compliant. 51 Supply of 1200 mm ceiling fan (Bajaj / Usha / Crompton / Havells / Orient) with accessories (downrod upto 3 m length wherever required, canopy, capacitor) — per fan - Material shall be of approved brand or equivalent approved by Engineer-in-Charge. 52 Pumping out stagnated water and sludge removal: Dewatering the underground tank (approx. 5m × 3m × 2.5m) using 3–5 HP portable submersible pump; bailing out accumulated water, sludge, and silt; manual scooping of residues and transferring to containers for safe disposal within 50 m. (Includes dewatering pump operation and labour.) 53 Installation: wiring from distribution, fixing isolator & point, earthing, testing & commissioning per AC point (includes switchgear mounting) (final testing to be done) 54 Mirror (600×450 mm) supply & fixing — bevelled or framed as approved. - Mirror fixed to wall with concealed hangers & silicone seal. 55 Soap dispenser + towel ring + toilet roll holder — supply & fixing; chrome plated brass/ABS as approved. - Includes adhesives, screws & wall plugs. 56 Grab rails / handrail & signage / coat hook — additional small fittings & SS hardware. 57 aluminium ventilators — 3 no. powder-coated aluminium louvre ventilators (400×400 mm) with insect mesh; including frames, SS hinges, locksets & sealing. 58 Electrical wiring & lighting installation — Supply, installation and wiring of 6 nos. light / exhaust / switch points including modular switches, MCB protection, PVC concealed conduit (20 mm), copper FRLS wire (1.5 sq.mm), ceiling rose, junction box, and accessories. 59 LED light fittings — Supply & fixing of 3 nos. LED ceiling lights 18 W, surface / recess mounted type, with necessary wiring and testing. Approved makes: Havells / Crompton / Philips / Bajaj / Wipro. includes fixing accessories, ceiling cutting, and finishing. 60 Commissioning verification (included within installation): continuity, polarity, insulation tests; corrective adjustments and handing over (per DB) 61 Granite counter for basins (3 nos) — supply & fixing of granite top (approx. 1.8 m length × 0.5 m width total area ≈0.9 m²) with cutouts for 3 basins, edge polishing, pedestal support & fixing. 62 Scaffolding, lighting, safety & PPE for confined space: Providing ladder, safety harness, safety rope, blower fan for ventilation, hand gloves, boots, masks, and site supervision for labour working inside tank. 63 Exhaust fan installation — Supply, fixing and connection of 2 nos. 200 mm dia exhaust fans with louvre and PVC frame, including 1.5 sq.mm wire, 2-pole MCB, and mounting. Approved makes: Crompton / Havells / Bajaj / Almonard / Usha. Includes making opening in wall / false ceiling and making good. 64 Installation: excavation for earthing pit, supply & compaction of back-fill, connection to main earthing conductor, testing (earth resistance), backfilling & reinstatement ( includes labour, testing & reinstatement) 65 Supply of isolator, modular accessories, switches, enclosure/housing & associated materials per AC point (all standard materials required per AC power point and as per instructions of engineer in-charge) - Material shall be of approved brand or equivalent approved by Engineer-in-Charge. 66 Tools, consumables: Supply and use of wire brushes, buckets, cleaning agents, safety gear, and minor hand tools. 67 Cold water supply distribution — Supply & fixing CPVC pipes (32/25 mm main + 20 mm branches), fittings, tees, unions, clamps & supports up to fixtures; includes angle valves (brass) and bib taps. Approved makes: Astral / Finolex / Supreme / Havmor (pipes & fittings), Jaquar / Cera (valves). - Includes joints, supports, wall chases & making good. Pressure test to 10 kg/cm². 68 Providing and fixing factory-made solid-core PVC doors suitable for toilet applications, comprising 30 mm thick PVC shutters made from multi-chambered extruded rigid PVC sections with integral stiles and rails, filled with solid PVC core, termite-proof, moisture-resistant, and fire-retardant, including smooth matt/semi-gloss finish in approved shade. The door frame shall be of PVC hollow sections 50×47×2 mm, mitre-jointed and solvent-welded, fixed in position with stainless steel screws, fasteners, and polymer sealant. Shutters shall be hung on three stainless steel (SS 304) hinges, fitted with SS mortice lock with two keys, tower bolt, rubber gasket/edge seal, door stopper, and necessary hardware. All joints shall be solvent welded, sealed watertight, and finished smooth. Size - 0.75 m × 2.00 m (clear opening) with outward swing and 20 mm bottom clearance from finished floor level. 69 Ventilation & lighting — Supply & fixing of 1 no. exhaust fan (200–250 mm), 1 no. LED ceiling light (18 W), wiring from nearest DB up to 5 m including modular switch & connection. Approved makes: Crompton / Havells / Philips / Bajaj or equivalent make. - Includes mounting, short conduit & testing. 70 Providing & fixing glazed wooden doors / shutters (30 mm thick wood) with 4 mm float glass panes, ISI MS pressed butt hinges & fittings, polished finish. 71 Provision & fixing of factory-made PVC door (30 mm thick solid-core) — supply, frame, SS hinges (3 nos.), mortice lockset with 2 keys, tower bolt, rubber gasket/seal, setting & making good. Standard size assumed 900×2100 mm. 72 Urinal partitions — supply & fixing (granite / high-density PVC panel) — panel size each 0.60 m × 1.20 m = 0.72 sqm; supply, template cutting, SS clamp supports, edge polishing, grout/sealant, and fixing in masonry opening. Qty = 5 nos (total 3.6 sqm). Approved: granite local / Bharat / Johnson or PVC from approved make. 73 Cleaning internal surfaces with wire and coconut brushes: thorough scrubbing and cleaning of walls, ceiling, and floor surfaces to remove algae, scales, and microbial growth; washing with clean water under pressure; collecting and removing sludge. (Complete surface cleaning up to 4–5 m tank depth). 74 Valves & Fittings Set: Includes 1 no. 50 mm NRV, 2 nos. 50 mm gate valves, 1 no. 50 mm foot valve with strainer, and all gaskets, nuts, bolts & washers; installation and testing complete as per IS:778 & IS:13095. 75 Main Entry Door (PVC solid core, 30 mm thick) with SS hinges, lockset, tower bolt, rubber seal, aluminium threshold – size 1.0×2.1 m complete with frame of approved brand and direction of engineer in-charge. - All doors shall be installed true to plumb, tested for smooth operation, and properly sealed to prevent ingress of moisture. Approved makes: Syntex / Wintech / Greenply / Rajshri or equivalent as approved by Engineer-in-Charge. 76 Supply of earthing materials per set: opper plate 600×600×3 mm (IS 3043) / Copper strip 25×3 mm (Havells / Ravin / CCI / Polycab / JEF), GI pipe for electrode, salt/charcoal back-fill, GI clamp, copper conductor to DB etc. (all materials required for earthing set complete and brand as approved by Engineer in-charge) 77 CP fittings, valves & accessories — bib cocks, angle valves, bottle traps, stop cocks, etc. (supply & fixing, leak test). 78 Supply, installation & connection of PVC Water Storage Tank (500 L): ISI-marked rotational moulded tank (Sintex/Plasto or approved), cylindrical vertical type with closed top; inlet, outlet, overflow & drain arrangements with ball valve; mounted on steel/concrete pedestal; connected to SA’s chamber toilet via 25 mm CPVC pipe; testing & disinfection complete. Material shall be of approved brand/make from above list or equivalent as approved by Engineer-in-Charge. 79 Minor Civil & Finishing Works: Includes repairing of disturbed plaster, floor making, cutting & sealing pipe openings, applying waterproof sealant at pipe entries, touch-up paint and cleanup of site along with Testing, Commissioning & Trial Run: Includes hydraulic testing of suction and delivery line, electrical testing for insulation resistance, earthing continuity, 48-hour trial run with load, demonstration to departmental staff, and submission of test report and warranty documents (minimum 1-year) 80 Foundation & Base Plate: MS base frame (10 mm thick) with foundation bolts and vibration pads, anchored on RCC pedestal (1.2 m × 0.6 m × 0.3 m), including painting and finishing around base. 81 Installation of DBs: Mounting on wall/stand, internal connections, earthing, MCB ferruling, interconnection to main incomer cable and proper labeling; testing for tightness and operation, labeling and dressing (including functional checks) 82 Sub-MCB protection & labeling — Supply, fixing & wiring of 6-way SPN MCB box (sheet steel, IP-65, powder-coated) with 32A incomer MCB and 6 outgoing circuits (6A–10A rating). Includes ferruling, labeling, and load marking. Approved makes: Legrand / Schneider / Siemens / Havells / L&T. (including plaster and paint patch work repair) 83 Sub-DB / MCB box & final connection — 6-way SPN with 32A incomer, ferruling, labelling & earthing. 84 Soil & waste discharge and septic tie-in — UPVC/SWR soil pipe 110 mm from pan to septic tank including inspection chamber connection, excavation (small), bedding, socket joints, gradient formation, backfill & making good. (Includes connection to existing septic tank / inspection chamber and leak test.) 85 CP fittings, valves, and accessories – including bib cocks, angle valves, stop cocks, health faucets, bottle traps, wall flange, and all required brass fittings. Approved makes: Jaquar / Kohler / Hindware / Parryware. (Complete with fixing, polishing, sealing and leak testing of all joints.) 86 Control Switch & Protection Panel: Wall-mounted IP-55 rated control box with ON/OFF selector, indicator lamps, thermal overload relay, voltmeter, ammeter, digital hour meter, and labeling. Material should be of approved brand by engineer in-charge. 87 Electrical Cabling & Panel Connection: Supply and lay 3-core × 6 sq.mm Cu flexible cable from nearest panel to starter, with MCB (32 A), DOL/Star-Delta starter, glands, lugs & terminations; approx. 15 m. Includes cable, switchgear, and terminations 88 Supply of DB enclosures and components — powder-coated metallic SPN/TPN type (MDS / Legrand / L&T / Schneider / Siemens), with neutral link, earth bar, incoming MCCB/MCB and outgoing MCBs (10 kA, C-curve). Material shall be of approved make as above or equivalent approved by Engineer-in-Charge. 89 Urinals with partitions – 5 nos. (wall hung type, vitreous china, with CP spreader, flush valve, waste pipe, trap and divider partitions in granite or FRP). Approved makes: Parryware / Hindware / Kohler / Jaquar / Cera. (Includes fixing with CP screws, sealant, flushing connections and making good.) 90 Basins with CP single lever mixer & bottle traps — 3 nos (counter / pedestal as required); supply & fixing. 91 Wash basins with CP fittings – 3 nos. (pedestal/half pedestal type with single lever pillar cock, bottle trap, waste coupling, brackets and all accessories). Approved makes: Jaquar / Kohler / Parryware / Hindware / Cera. (Includes water supply and waste connection, proper leveling, testing and polishing of granite counter if applicable.) 92 Providing & fixing MS rungs (20 mm dia) in underground RCC water tank at 300 mm c/c (approx. 9 rungs) and providing RCC manhole cover (M20) 1.2 m² × 100 mm thick with MS frame, hinges, locking arrangement, finishing and all incidental works, testing & curing 93 Hand dryer installation — Supply & fixing of 1 no. automatic hand dryer (1200–1600 W, IP44 rated) complete with wall plug, electrical connection and testing. Approved makes: Dyson / Crompton / Bobrick / Mitsubishi / Havells. (Includes switch plate, MCB, testing & demonstration.) 94 Laying, termination, testing & commissioning of above power cable with necessary accessories, GI saddles, trenching/ducting, tagging & identification, complete. (4 runs × 25 m = 100 Rmt) 95 Supply, installation & connection of PVC Water Storage Tank (2000 L): ISI-marked triple-layer with all fittings (inlet, outlet, overflow, drain cock, valves & supports), plumbing connections to staff toilets, testing and disinfection complete as per manufacturer’s recommendations and Engineer-in-Charge. Material shall be of approved brand/make from above list or equivalent as approved by Engineer-in-Charge. 96 Re-fabrication of main gate (raising height from 1.2 m to 2.1 m; width 3.75 m) including welding, repairs, alignment, priming & painting and supply/fixing of necessary fittings, complete (measured as one job). 97 Supply & fixing of sanitary fixtures (EWC dual-flush + WC seat, 1 urinal) — vitreous china, wall/floor mounted as applicable; includes seat, cistern, flush fittings, urinal trap. Approved makes: Parryware / Hindware / Cera / Jaquar / Kohler. - Supply, transport, setting, sealing & testing; warranty documents. 98 Supply of power cables (AL / Cu) (Polycab / KEI / Havells / Finolex / RR Kabel) & accessories (copper/aluminium cable, glands, lugs, saddles) — supply portion includes Supply of 1.1 kV grade 3½-core 25 sq mm aluminium armoured PVC insulated power cable with glands, lugs & saddles, complete. (4 runs × 25 m = 100 Rmt)- Material shall be of approved brand or equivalent approved by Engineer-in-Charge. 99 SITC of Centrifugal Monoblock Pump (4–5 HP, 3-phase): ISI-marked horizontal end-suction type; delivery head 45–55 m; discharge 300–400 LPM; CI body, bronze impeller, SS shaft, mechanical seal, flanged connections. Make: Kirloskar / Crompton / KSB / Texmo / Lubi. Material shall be of approved brand/make from above list or equivalent as approved by Engineer-in-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Gujarat View Result →
43.
Drinking Water Supply and Sanitation #10297779 Price Bid
tender for Rate quotation of different items for implementation of SCADA system at WTP, Boosting Station and all OHR sites (Existing and Proposed) of Surface Water-Based Piped water Supply Scheme, Northern Sector, Part-I at Kaliganj Block, in the District of Nadia,under Nadia Division, P. H. E. Dte. Sl. No. Item Description 1 Intake Jetty 2 Providing Electromagnetic Flowmeter, Protection:IP68, Full bore type Electro Magnetic Flowmeter With Smart Transmitter(Volume Flow rate output:4-20 mA HART Output and Totalizer Pulse Output, Supply:24VDC for (i) Intake site:- Magnetic Flow Meter DN600 3 Repair / Servicing of Pump, Motor, Pressure Gauges, Valves, Crane. 4 Water Treatment Plant:-Flash Mixer, Distribution Chamber, Flocculator, Tube Settler:- 5 Ductile iron double flanged electrically operated Sluice valve generally conforming to IS: 14846, Major construction In Ductile Iron to IS 1865 Gr. 500/7, Seat Rings and spindle nut of gunmetal to IS 318 Gr. LTB 2, non-rising stainless steel AISI 410 spindle, valves suitable for a PN1.0 rating. Flanges drilled to IS 1538 Table 4 & 6 Valves are complete with Rotork Syncropak /AUMA Epak Electrical actuator having inbult reversal starter with position indicator.(i) Tube Settler Sludge Valve 200 mm dia 6 Telescopic arrangement for Sludge waste valve for Mechanical Flocculator 7 New MCC Panel required for new set of motorized actuator valve of Tube Settler 8 Filter Bed :- 9 Motorized Ball Valve(syphon) 10 Magnetic Level Switch 11 Supply, installation, Testing, and Commissioning of Managed Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100 MBPS Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc. as required complete In all respect. All as per pre-approved by Engineer In charge. 12 PDB Cum MCC Panel Extension & upgradation for SCADA 13 80 mm Dia Perforated Lateral Pipe repair 14 Repair / Servicing of Air Blower (twin lobe type) of filter bed i.e. motorised actuator valves, suction filter, safety valve, V Belts, V Belt Guard, Suction and Discharge Silencer, NRV, Pressure Gauge, Pulleys, Anti-Vibration Pads, acoustic hood etc. 15 IVC brand Double eccentric design, short body type Electrically operated, double flanged Ductile iron butterfly valves generally confirming IS: 13095, having body, disc end cover in graded Ductile Iron IS:1865 Gr. 400/15, EPDM rubber face ring secured on disc by a SS AISI 304 retaining ring with stainless steel screws, rubber ring seating on a corresponding SS AISI 304 seat in body, Shaft Stainless Steel to AISI: 410. Flanges drilled to IS: 1538, Table - 4 & 6. Valves suitable for a maximum working pressure of 10 kg/cm² (seat test) & body tested to 15 kg/cm2, valves are operated by suitable 3 phase, 415v, 50Hz, AC power supply. ROTORK make syncropak /AUMA Epak electrical actuator having inbuilt reversal starter & position indicator.i) 400 mm Dia for control chember of filter bed 16 Waste Water Collection Sump Pump :- 17 Ductile iron double flanged electrically operated Sluice valve generally conforming to IS: 14846, Major construction In Ductile Iron to IS 1865 Gr. 500/7, Seat Rings and spindle nut of gunmetal to IS 318 Gr. LTB 2, non-rising stainless steel AISI 410 spindle, valves suitable for a PN1.0 rating. Flanges drilled to IS 1538 Table 4 & 6 Valves are complete with Rotork Syncropak /AUMA Epak Electrical actuator having inbult reversal starter with position indicator.(i) 150 mm Dia 18 Panel Replacement& upgradation for SCADA compatibility(i) waste water transfer pump & waste water recycle pump 19 Panel Replacement& upgradation for SCADA compatibilityi) submersible agitator 20 800 X 800 Manually Operated Sluice Gate Repair 21 Level Indicator 22 Supernatent Sump Pump House, Sludge Lagoon:- 23 Level Indicator 24 MCC Panel compatible to SCADA 25 Chemical House:- 26 Cage for Alum slab carry. MOC: SS 316 27 Alum Loading Tray Replacement 28 PE Dosing Pump Repair 29 PE tank Repair 30 Flow Meter & Valves Replacement for SCADA upgradation 31 Dampner 32 VFD (Variable Frequency Drive) for Alum & PE Dosing Pump 33 Y strainer for Alum & PE Dosing Pump 34 Diffuser Pipe line for Alum filling tank 35 MCC Panel Extension & upgradation for SCADA 36 Chlorine Room:- 37 Safety Equipment for Chlorination System i)Canister types gas mask-2 nos, ii) safety shower with eye wash- 1 set, iii)Breathing apparatus with air cylinder 1 no, iv) safety clothing- 2 sets, v) Spare canister for gas mask- 2nos, vi) Gum Boot 2 pair, vii) Residual chlorine test kit- 1 set, viii) Ammonia spray bottle-1 no. ix) Ventilation fan- 2 nos 38 PDB Cum MCC Panel Extension & upgradation for SCADA 39 Pressure Switchi) CWPH DEWATERING SECTION, AIR BLOWER FOR FILTER BED, PIPE GALLERY DEWATERING SECTION, RECIRCULATION PUMP FOR WASTE WATER SUMP, RECIRCULATION PUMP FOR SLUDGE SUMP 40 Level Switchi) CWPH DEWATERING SECTION, PIPE GALLERY DEWATERING SECTION, RECIRCULATION PUMP FOR WASTE WATER SUMP, RECIRCULATION PUMP FOR SLUDGE SUMP 41 Existing & proposed OHR: Safety Equipment required for Existing & Proposed OHR sites:- 42 i)Canister types gas mask-2 nos, ii) safety shower with eye wash- 1 set, iii)Breathing apparatus with air cylinder 1 no, iv) safety clothing- 2 sets, v) Spare canister for gas mask- 2nos, vi) Gum Boot 2 pair, vii) Residual chlorine test kit- 1set, viii) Ammonia spray bottle-1 no. ix) Ventilation fan- 2 nos 43 Ultrasonic Level Transmitter for OHR 44 New MCC Panel required for new set of motorized actuator valve of OHR inlet & Outlet 45 Supernatent Pump House 46 Design, manufacture and supply of 2 M.T. capacity x 12.25 meters span approx. x 6.0 meters lift approx. Single girder construction Hand operated overhead traveling crane incorporated with Indef brand triple spur gear Chain pulley block. All the three motions to the crane shall be manual and to be operated from floor by hand chain. The crane shall be designed for Class I duty indoor operation conforming to IS: 807, IS: 3177 and IS: 3832 as and where applicable. The crane structure shall be supplied duly painted with red lead primer prior to dispatch . Final painting, if required to be carried out by you at your end after installation. The crane shall be tested with 25% overload at our works as per IS: 807-2006. The Rate should be inclusive of Packing and forwarding charges & Freight / delivery charges 47 15 x 2 = 30 mtrs. Design, manufacture and supply of full length sole plate fitted with 40 mm square rail and to be fixed on proposed full length concrete girder by suitable hilty bolts at regular interval . You are requested to provide suitable intermittent insert plates ( at 500 mm apart) maintaining level. 48 Installation charge 49 * Note:- i) Quoted Rate should be exclusive of all taxes.ii) Quoted Rate should include Packing and forwarding charges, Freight/delivery charges, Installation and Commissioning charges, etc. whereas applicable.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
44.
Shipping #10277607 Price Bid
Tender For Renovation Of North Wing Of Ship Building Complex.; 1 Providing and fixing temporary fencing using green net in two layers of ht approximately 300-350cms fixed on vertical posts and horrizontal members using pipes /square tubes properly fixed using welding to line and level and fixing green net using GI wire /ties at locations pointed out by the engineer in charge and removal of the same after the completion of work (material shall be taken back after the completion of work ).Rate including costs of all materials, labour etc complete . 2 Demolishing R.C.C / P.C.C work manually / by mechanical means including stacking of steel bars,breaking in to small pieces (approx 15cm) and disposal of unserviceable material within 5km lead as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc complete. 3 Demolishing brick work/solid block manually / by mechanical means including breaking into small pieces and disposal of unserviceable material within 5km lead as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc complete. 4 Dismantling and removing tiles setincement mortar in floor including cleaning and stacking, serviceable materials and removing the debris within 5km lead as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc complete. 5 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish within 5Km lead as per direction of Engineer-in- Charge, including all labour, scaffolding,other incidentals, hire for tools and plants etc complete. 6 Dismantling, removing and loweringwooden frame work, wooden partition, planked sheeting , cladding, or other partitions stacking serviceable materials & removing the unserviceable material within 5km lead asper direction of Engineer-in- Charge, including all labour, scaffolding, other incidentals, hire for tools and plants etc complete. 7 Dismantling AC sheet ceiling including suppports up to height of 5metres including conveying and stacking the dismantled materials at the places pointed out by the Engineer-in-charge. Rateincluding all labour, scaffolding, other incidentals, hire for tools and plants etc complete. 8 Dismantling doors,windows ,ventilator (steel or wood) shutter including chowkhats,architrave,hold fast etc. complete and stacking at the places pointed out by the Engineer-in-charge. 9 Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet,supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc 10 Dismantling of flushing cistern of all types (CI/PVC/Vitrious China),wash basin, kitchen sink, urinal pans of all sizes . 11 Dismantling of flushing cistern of all types (CI/PVC/Vitrious China),wash basin, kitchen sink, urinal pans of all sizes . 12 All valves up to 65mm, stop cocks and taps, shower roses, Mirrors, soap trays, towel rods,health fauset of all sizes etc. 13 Dismantling the G.I/PVC pipes of any diameter (with specials and other fittings) from wall/floor including cutting and disposal of dismantled materials at the places pointed out by the Engineer-in-charge. 14 Supplying, fabricating and placing in position steel reinforcement of grade Fe-500D to size and shape including cost and conveyance of all materials, labour for uncoiling, straightening, cutting, bending, binding, lapping or welding etc. complete including cost of reinforcement. (Rate is inclusive of cost of 22g binding wire.) 15 Providing and laying Reinforced cement concrete 1:11/2:3 using 20mm I.S. nominal size hard granite broken stone forthe following items including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of form work etc. complete, excludingcost and fabrication charges of steel reinforcement etc. 16 Providing and layingcement concrete 1:2:4 using 20mm I.S. nominal size hard granite broken stone including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing etc. complete. 17 Supplying, fabricating and erectingof mild steel tubular (round, square and rectangular hollow tubes) of any size and weight by straightening, cutting and welding using as per approved drawing or as instructed, erecting in position to line and level by welding/bolting embedding in concrete including applying one coat of zinc chromate primer & two coats synthetic enamel paint, hire charges for tools and plants,scaffolding, cost of electrodes, wastage, other incidentals etc. complete all as directed by the Engineer-in- charge. 18 Supplying, Fabrication of all types of structural steel works by straightening,cutting,welding & painting with aluminium paint on all types of steel sections plates,flats of any size and weight as per approved drawing or as instructed,erecting in positionto line and level by welding/bolting embedding in concrete including hire charges for toolsand plants, scaffolding, cost of electrodes, other incidentals etc. complete all as directed by the Engineer-in-charge. 19 Providing and constructing 30x20x15 cm or nearest available size solid concrete block masonry in CM 1:5 in walls of superstructure work , using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, return of packings, etc complete as directed by the Engineer - in - charge. 20 Providing and constructing 30x20x10cm solid concrete block masonry in CM 1:5 in walls of superstructure , using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage,etc complete as directed by the Engineer - in - charge. 21 Providing and laying autoclaved aerated cement blocks masonry with 150mm or nearest available size thick AAC blocks in super structure above plinth levelwith RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 22 Plastering with CM 1:4, 12mm thick floated hard and trowelled smooth for walls including watering, curing, cost and conveyance of all materials and labour charges ,scaffolding, handling, unloading, finishing,casing made in the wall for electrical / plumbing works other incidentals etc complete. including costs of cement. 23 Painting on walls with two coat ofinterior emulsion paint of premium quality and colour over one coat cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour,scaffolding other incidentals etc. complete. 24 With one coat of putty 25 Without putty 26 Painting on new wallswith two coats of Premium quality exterior emulsion paint of approved brand and colour over one coat of cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete. 27 Providing and laying water proofing treatment inbathroom / toilets etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry. 28 Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mmsizeof approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile = ₹565/m2 excluding GST) 29 Providing and laying approved type Step Tiles(Restile/khajaria or equivalent ) of size 900x300mm or nearest available size as approved by Engineer in Charge, set in CM 1:3 20mm thick and adding necessary cement grout for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete,including cost of cement. ( basic rate of tile is Rs. 1400/m2 excluding GST) 30 Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mm sizeof approved make, quality and colourafter clearing the floor properly by pasting with chemical adhesive Cerabond/Myk or equivalent and pointing the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge, including skirting (Basic rate of tile = ₹565/m2 excluding GST) 31 Providing and laying ceramic anti-skid floor tiles not less than 300 x 300mm size of approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile = ₹546/m2 excluding GST) 32 Supplying and laying glossy/matt finished vitrified wall tiles not less than 450 x 300mm size of premium quality of approved make ,quality and colour for dadoing by pasting with chemical adhesive Cerabond, Myk or equivalent and pointing the joints of having joints of 3mm width,using epoxy grout,filling/grouting, finishing, cost and conveyance of all materials labour other incidentals etc. as per the direction of Engineer-in-charge(Basic rate of tile Coloured Tiles Rs. 527/m2 Excl. GST) 33 Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have stab installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edgedCalcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc.. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete. 34 Providing and fixing in position half glazed partition using 63.5 x 38.10 x 2mm thick or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8mm or nearest available thick laminated particle board and 5mm thick plain glass fixed with necessary EPDM beading including cost and conveyance of all materials, labour as per direction of Engineer-in- Charge complete. 35 Providing and fixing in position aluminium partition using 63.5x38.10x2mm thk or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thick laminated particle board fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. 36 Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with8mm thick particle board of height 1.2m from bottom frameincluding cost and labour charges for all materialsand fixing etc., complete. The door is to be provided with 1no. door lock,2 nos anodized aluminium handles 150mm or nearest size one on each face ofdoor shutter, 1no of door closer of approved make. 37 Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 8mm thick particle board fixed with EPDM beading between panel and aluminium frame on all faces and the powder coated aluminium divider section fixed at the mid height including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock,2 nos anodized aluminium handles 150mm or nearest size one on each face ofdoor shutter, 1no of door closer of approved make. 38 Providing and fixing Aluminium openable ventilatorusing powder coated Aluminium frames of approved quality and shade using 63.5x 38.1x 2mmsizeand shutter frame50x20x1.5mm or nearest available sections aluminium Sections & 4mm thk.Plain glass ,EPDM beading,locking arrangements including cost and conveyance of all materials labour,all other incidentals etc.complete. 39 Providing and fixing in position fully glazedaluminium super sliding window/ventilator with lock system,powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size63.5 x 31.75 x 1.60 mm for frames, 38.10 x19.5 x 1.60mm for shutter interlock, vertical and horizontal and plain glass 4mm thickincluding all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials labour, other incidentalsetc. complete. 40 Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwich panel. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, 150mm SS aldrop 1nos, 125mm aluminium handle 2 nos, door stopper, door closers with necessary screws and grips including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc. complete. 41 Providing and fixinghigh quality threaded bolts M12x145 mm with nuts & washers to line and level in existing reinforced concrete member using chemical (resin) anchor Systems such as HST-165 of HILTI make or equivalent, including drilling holes of required diameter and depth, injecting the chemical by dispenser, cost of chemical ,scaffolding, all tools and tackles, etc complete as directed by the Engineer -in-charge. 42 Drilling holes for M12 bolt -hole 14mm dia x 100mm deep ,injection of chemical resin and fixing of bolt 43 Supplying and pasting sun control film to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials labour other sundaries etc. complete all as directed by the Engineer-in-charge. 44 Providing & fixing in position manually operated Roller Blinds of approved shade and colour with good quality fabric including cost and conveyance of all material all labour,other incidentals etc. complete. 45 Glass Partition :- Supply and installation of full height straight glass partition 12mm thick toughened glass using SS glass patches ofapproved make at bottom and top. The glass to glass joints, glass to wall shall be filled with silicon sealant on both side . Rate shall include for providing transport charges, handling, loading and unloading, Installation, Providing cut out & holes on glass wherever required for the fittings, protecting the module and glass till handing over, testing, commissioning all necessary hardwares, scafolding, wastage etc. complete and all as per manufactures specification as directed Puma / Pekt 46 Providing and fixing 12mm frameless toughened openable pivot glass door with single panel along the glass partition with suitable SS handle, floor spring, and fixing the glass panels firmly using SS 304 grade approved make accessories, polishing all visible edges of the glass perfectly,and providing lock arrangement. Providing cut out & holes on glass wherever required for the fittings, lock, floor spring etc including cost & conveyance of all materials, installation charges etc complete. 47 Supplying, cutting, threading, laying and jointing rigid PVC pipes (Hycount or equivalent) including all specials such as tees, bends, elbows,reducers, plugs, etc. through walls/ concrete, making good the wall/ concrete after fixing using CM 1:3, taking connection from the existing water supply including cost and conveyance of all materials, labour, testing the line before embedding etc. complete excluding specials of 110 mm dia pipes. 48 20mm dia PVC pipe (10kg/cm2) 49 25mm dia (working pressure 10kgf/cm2) 50 32mm dia (working pressure 10kgf/cm2) 51 40 mm dia Pipe (working pressure 10kgf/cm2) 52 50 mm dia Pipe (working pressure 10kgf/cm2) 53 63 mm dia Pipe (working pressure 6kgf/cm2) 54 75 mm dia Pipe (working pressure 6kgf/cm2) 55 110mm dia - 6kgf/cm2 (Specials like bend /reducers / tee etc will be measured separately) 56 Supplying and fixing white European type Water Closetof approved quality at all floors with approved quality high level/low level PVC flushing cistern 10 L or nearest capacity, at all floors including cost of 15mm brass CP angle cock, seat cover, 15mm/20mm P.V.C connection,cost and conveyance of all materials,labour,other incidental charges etc. as directed by the Engineer on charge. etc. complete but excluding cost of cement. 57 Providing and fixing accepted brand of hand wash basin, ceramic type white of size 550x400 or nearest with half pedestal with 15 mm AC type sensor C.P. pillar tap including inlet/outlet fittings, waste coupling, sensor unit, cost &conveyance of all materials,labour for fixing &connecting other incidentals etc complete. 58 Providing and fixing white vitreous urinal basin of acceptable size and brand decided by Engineer Incharge with sensor operated (AC type) flush including cost & conveyance of all materials, installation, labour other incidentals, etc. 59 Supplying and fixing 750 x 320mm size or nearest size porcelin urinal partition of accepted quality, brand,white colour including cost &conveyance of all materials,labour etc complete as directed by the Engineer-in-charge. 60 Supplying and fixing the following water supply fitting(Cera/parryware/equivalent), including cost and conveyance,all labour for fitting,all incidental charges etc. completeall as directed by the Engineer-in-charge. 61 15 mm CP long body tap 62 Brass ball valve 50mm 63 Brass ball valve 40mm 64 40 mm dia Pipe (working pressure 10kgf/cm2) 65 50 mm dia Pipe (working pressure 10kgf/cm2) 66 63 mm dia Pipe (working pressure 6kgf/cm2) 67 75 mm dia Pipe (working pressure 6kgf/cm2) 68 110mm dia - 6kgf/cm2 (Specials like bend /reducers / tee etc will be measured separately) 69 110mm dia - 6kgf/cm2 (Specials like bend /reducers / tee etc will be measured separately) 70 Supplying and fixing following dia. PVC specials (Hycount or equivalent) of approved quality including cost and conveyance of all materials, labour, other incidentals etc.complete. 71 110 mm dia Door T 6 KG 72 110 mm dia Plain bent 6 KG 73 110 mm dia Plain tee 6 KG 74 110x75 Reducer 6 KG 75 110mm dia Y 6 KG 76 Supplying and fixing best quality approved brand PVC vent cowl 110mm dia with mosquito proof net covering at all height including cost and conveyance of all materials, labour, other incidentals etc. complete. 77 Supplying and fixing bevelled edged or plane edged coppered Black Mirror 600x450mmx5.5 thk or nearest available size Indian made glass with plastic sheet at the rear and fixing the same in position with necessary plugs embedded in CM and screwed into with CP fixing screws including cost and conveyance of all materials, labour, other incidentals etc. complete. 78 Supplying and fixing best quality Stainless Steelsoap dish of standardsizeincluding cost and conveyance of all materials, labour, other incidentals, plugs, screws etc. complete. 79 Supplying and fixing C P premium quality Coat Hook specified by engineer in charge, including cost and conveyance of all materials labour etc. complete. 80 Supplying and fixing CP towel rods of 20mm dia of450mm to 600mm long of approved quality, including plugs, screws, embedding the plugs in masonry/concrete in CM all as directed by the Engineer-in-charge. 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983with C.I. brackets and stainless steel plug 40 mm, including and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 225 mm 82 Earth work in excavation in all kinds of soils by mechanical means (hydraulic excavator)/manual means lift up to 1.5m including dressing of sides, ramming of bottoms, dewatering, leading water into drains, getting out the excavated soil as directed, within 5km lead and backfilling. 83 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 84 Shifting of following items including careful dismatling,packing,transportationfrom one office to another office at any where in CSL without damaging to the materials/adjoining structures etc at all heights as per the direction of the Engineer-in-charge.(Transportation of files,if any along with the furniture shall be done without any extra cost.All items will be will be packed with protective materials to prevent damage during shifting and appropriate handling equipment will be used for safety .) 85 Shifting of furniture, includes workstation (21 nos),executive tables (39 nos),chairs (112 nos),cupboard (35 nos) ,sofa set (9 nos) ,Teapoy (4 nos) ,rack (15 nos), stools (4 nos )and pantry items. Additionally electronic equipments such as computers,printers,projectors and other miscellaneous office.(Number mentioned are approximate ) 86 Dismantling of optimiser unit without damaging its components(39 unit , 3 bays ) 87 Assembling of old optimiser storageunit properly with safety arrangements and without damage .The optimser storage is placed according to the directions of theEngineer in charge. 88 Supplying and fixing 250mm diaPVC gutter at the eve of roof for collecting rain water including necessary elbow drop,end drop,open nosil, jointer and pathy clamp for holding gutterfixing to line and level cost and conveyance of all materials, labour, scaffolding etc. complete. 89 Supplying and fixingspine and fin based modular workstation of size 1200x600, with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims. FIN:out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with fabric at intermediate level. Top block finished in fabric. Bottom block is finished in metal.Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal.Intermediate blockson main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelaminated particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm dPedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 90 Supplying and fixing panel & tile based modular workstation of size1650x 750D,1200Wx450D with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims.Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upt the panels through concealed conduits inside the blocks.Modesty panels with assembly leg- 25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg.legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface -Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 750 mm d and ERU table recta of size 1200 mm w x 450 mm d. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 91 Supplying and fixingpanel & tile based modular workstation of size 1650x600 900x450 with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Modesty panels with assembly leg25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface -Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 600 mm d and ERU table recta of size 900 mm w x 450 mm dPedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 92 Supplying and fixingpanel & tile based modular of size1500W X 750D, Return side - 900W X 450D with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Modesty panels with assembly leg - 25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface -Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w x 750 mm d and ERU table recta of size 900 mm w x 450 mm d.Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1fileCPU trolley - with castorsKBPT with mousetray - Metal 93 Supplying and fixingdesk based modular workstationof size 2100W X 900D, Return side - 1200W X 600D with System ht - 750 mm.LEGS: Providing metal powder coated leg . Legs are for standard workstation height of 750mm Understructure Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.wire managementFor 750 high - Standalone power box with wire riser have been considered. Access flapcover will be provided. Switch plate of (8+3 ) module is considered for Power and Data points. Metal modesty: Lazer cut perforated Metal modesty.Metal modesty are mounted on the worktop with the help of the modesty mounting bracketsModesty terminates at 400 mm from ground .WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 2100 mm w x 900 mm d for Main table, 1200 mm w x 600 mm d for Return unit.Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 94 Supplying and fixingdesk based modular workstation of size 1800W X 750D, Return side - 1200W X 600D with System ht - 750 mm.Providing metal powder coatedleg . Legs are for standard workstation height of 750mm.understructure : Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.Wire management For 750 high - Standalone power box with wire riser have been considered. Access flapcover will be provided. Switch plate of (8+3 ) module is considered for Power and Data points. Metal modesty: Lazer cut perforated Metal modesty,these are mounted on the worktop with the help of the modesty mounting brackets .Modesty terminates at 400 mm from ground.WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size1800W X 750D, Return side - 1200W X 600DPedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 95 Supplying and fixing conference tables of size 2100W X 900Dwithworktop ht - 750 mm. Legs has inclination in one plane. Leg has an extrusion cover made of Aluminum alloy which can have different color.Wire Management Single Power box (8M+3M & 8M+3M )with raiser and Soft closing dual access flap with brush. Worktop deatils 25mm thick prelaminated partical board with pvc lipping. 96 Supplying and fixingof Storage unit: MetalDoor with CAM Lock for 1200W* 1950H Product Size - 2 Doors (LH and RH) for 1200WFor 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision, Click action mechanism. ,Key removable in locked and unlocked positions.Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf has max Load Capacity of 80kg UDL for 1200W unit5 Nos. of fixed shelves for 2325(H)A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). 97 Supplying and fixingstorage unit of size 1200Wx470Dx1200H .Height including leveler height with zero position2. Top panels and end cover panels are to be booked separately CONSTRUCTION AND MATERIAL :-1)Aesthetically appealing completely knock down construction.2)Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mmCRCA), Back panel(0.5mm for 750mm and 900width Storage Units and 1.2mmCRCA for 600mm and 1200width Storage Units to avoid toppling of unit in caseof Glass door unit and single door unit), Top Bottom stiffener(1.2mm CRCA) andEnd Cover(0.6mm CRCA). CRCA D Grade as per IS-513.All metal panels are coated with Epoxy polyster powder of 50±10 micronsthickness.TOP OPTIONSFor top panel two options available1)Metal Top Panel (0.6mm CRCA) bent panel which is powder coated with Epoxypolyster powder of 50±10 microns thickness.2)Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conformingto IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping ) SHELVING1)Fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)2)1 No. fixed shelf for 750mm height and 2NO. Fixed shelf for other remaining heights3)A4 size box file (85Wx345Hx285D) can be stored vertically.4)Number of files that can be stored per shelf is : For width 1200w - 13 Nos.5)Each shelf has max Load Capacity of -74kg UDL for 1200W unit LEVELLER- Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plasticbase provides vertical adjustment for floor unevenness and leveling of units.- Height of Leveller is 50mm and 25mm Leveller adjustment available HINGE COVER CAPMetal diecasted cap powder coated with Epoxy polyster powder of 50±10 microns thickness to cover the hinge holes with plastic expandable socket for open shelf unit only NAME TAG STICKER 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the left side of shelves. METAL DOOR- SIZE: Door Width (DW) - 373mm /448mm /598mmDoor Height (DH) - 663mm /963mm /1128mm /1280mmDepth - 18mmRemarks: 2 Doors (LH and RH) for 1200mm Width Storage Unit Door Width (DW):-For 600mm Width and 1200mm Width storage Unit - Each Door width is 598 mm (Double Shutter - 1LH and 1RH)Door Height (DH) :For 1200mm/1215mm Height storage Unit -Each Door Height is1128mm.CONSTRUCTION AND MATERIAL:1.Made from 0.6mm Thick CRCA with 0.5mm Thick CRCA Stiffner (*CRCA D Grade, IS-513)2.Soft closing Hinges Available with 105° door opening angle3.All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness.4.Inbuilt HandleLOCKING DETAILS: Cam Lock-3 Way locking provision.-Click action mechanism.-Key removable in locked and unlocked positions.-Zinc alloy die cast housing.NAME TAG STICKER: 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the door at left top corner 98 Providing and fixingstorage unit withglass door of size 900Wx470Dx1200H .Height including leveler Height with zero position .Aesthetically appealing completely knock down construction.Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mmCRCA), Back panel(0.5mm for900mm width Storage Units ), Top Bottom stiffener(1.2mm CRCA) andEnd Cover(0.6mm CRCA). CRCA D Grade as per IS-513 3)All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. 1)Metal Top Panel (0.6mm CRCA) bent panel which is powder coated with Epoxypolyster powder of 50±10 microns thickness. SHELVING 1)Fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)2)2NO. Fixed shelf for other remaining heights 3)A4 size box file (85Wx345Hx285D) can be stored vertically. LEVELLER- Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plasticbase provides vertical adjustment for floor unevenness and leveling of units. Height of Leveller is 50mm and 25mm Leveller adjustment available HINGE COVER CAP Metal diecasted cap powder coated with Epoxy polyster powder of 50±10 microns thickness to cover the hinge holes with plastic expandable socket for open shelf unit only . 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the left side of shelves. GLASS DOOR- SIZE: Door Width (DW) -448mm Door Height (DH) - 1128mm 99 GM Cabin : High back chairSupplying of High back chair of make Godrej,wipro,featherlite,DamroSeat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leatheretteand moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0cm, (H)-70.5 .0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore A Hardness and reinforced with M.S insert. . The 2D armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The mechanism of chair shall have following features:360 degree revolving type, AWS mechanism with seat slide ,multi lockingfor better comfort. The chair shall be provided with pneumatic height adjustment CLASS 4which shall have stroke of 12 cm.The pedestal shall be made of die-cast polished aluminium . It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black PU or nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 115.5 to max 127.5 cm. Seat height - min 43.0cm to max 55 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 100 GM Cabin: Three seater sofa Supplying and installing of Three seater sofa of makeGodrej,wipro,featherlite,Damro. The seat , armrest & backrest assembly shall consists of a Pine/meranti understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette /Fabricupholstery .seat and back consists of a fabricated inner-frame hardboard assembly with layers ofPU foam thickness of 10 cm and density of 30 kg/sq.m. leg is MS metal legsheight of 149 mm with nylon bush.Seat depthis 60.8cm, Overall Dimensions of sofa shall beHeight - 85 cm,Total length - 198.2 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 101 DGM Cabin & AGM Cabin : Executive High back Providing and placingExecutive high back chair of make Godrej,wipro,featherlite,Damro.The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric. Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad , adjustable head rest assembly. The moulded polyurethane foam for seat is with density=50+/-2kg/m ³. The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest 4 way button operated height adjustment(2D). The arm top is made of soft moulded PU. The mechanism of chair shall have following features:360 degree revolving type, Automatic weight sensing Mechanism with multi lock.The chair shall be provided with pneumatic height adjustment (CLASS 4 )which shall have stroke of 11.2 +/- 0.5 cm.The pedestal shall be injection moulded in black plastic GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 102 DGM Cabin : Sofa Two seater Providing and placing Two seater sofa of make Godrej,wipro,featherlite,Damro .The seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery . The size of seat shall be: 55.0cm. (W) X 55.0cm. (D) X 22.0cm. (T) Approx. The size of back shall be:55.0cm(W) X 35.0cm. (H) X 22.0cm. (T) Approx.Elastic Webbing is used to give a soft contour to the seat . It consists of a fabricated inner-frame hardboard assembly with layers of foam. The hardness of the P.U. foam= 16-20 Kgs. on Hampden m/c for 25% compression of the foam. The rectangular leg is made of wood and 4 tier packing is used to minimize damage & reduce wastage. Overall Dimensions of Chair shall be Seat Width - 54.5 cm, Height - 82 cm, Total width - 91 cm, Total length - 151 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 103 SM/AM/PO/Chairs : Executive medium back Providing and placingExecutive medium back chair OF MAKE Godrej,wipro,featherlite,Damro.The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. 2D Armrest has height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment,position tilt limiter with Back-safety return feature. The chair shall be provided with class 4 pneumatic height adjustmentwhich shall have stroke of 95 +/- 5 mm.The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 104 Visitor chairs: Providing and placingvisitors chair Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. . The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 160mm (W) x 90mm (H) at fixed position Armrest is fixed armrest .The visitor base is cantilever type. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 102.5 cm. Seat height - min 44.5 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 105 CA/Attender/os/pa chair: Providing and placingchair size of back shall be (W)-45 cm, (H)-55 cm & size of seat shall be (W)-49 cm x (D)-50.0cm of makeGodrej,wipro,featherlite,Damro. The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. . Armrest has 1D height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro1 mechanism, Tilt tension adjustment, tilt limiter with Back-safety return feature. The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 95 +/- 5 mm.The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 63.0cm, Depth of Chair - 67.0 cm . Heightfrom groundmaximum 110.5 cm. Seat height - min 45.0cm to max 55.0cm.Dimensions tolerance / variations shall be within +/- 1 cm. 106 Tender opening room chairs:Providing and placing of chairs of makeGodrej,wipro,featherlite,Damro. The seat and back shall be injection moulded in Polypropylene. They shall be fitted on the understructure assembly and shall be fixed with screws.. Approximate Back Size shall be: 42.0cm. (W) X 38.5 cm. (H). and Approximate Seat Size shall be: 46 cm. (W) X 39.5 cm. (D). The understructure assembly shall bemade of MSERW PIPE PIPE:Dia 19x1.6 and silver powder coated ( DFT 40-60 microns ). Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 83.0cm, Width & Depth of Chair as measured from base - Width-42.0cm and Depth-46 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 107 Suppling and fixing 8mm plain glass with edge rounded for table top. 108 Supply of 600X600 mm, 230VAC, 1Ø, LED light fitting with supporting brackets and chain as required. 34-36W 109 Supply of 230VAC, 1Ø, 12-15 Watts LED modularrecess Down light fitting with supporting bracket/chain complete accessories as required 110 Supply of 230VAC, 1Ø, 6-10 Watts LED modularrecessDown light fitting with supporting bracket/chain complete accessories as required 111 Supply of 18W, 1700- 2100 lumen output, 230V AC,50 Hz, 18-20W 18-20W 4F/1200mm length, T5 LED tube integral light fittings . 112 Supply ofBLDC wall fan ,400 mm sweep,230 V AC 113 Supply of LUKERLED mirror light fitting 12 Watts with supporting bracket as required. 114 Supply of Ceiling fan BLDC, 230V, 50Hz, 5 star rating1200 mm sweep 115 Supply of Ceiling fan BLDC, 230V, 50Hz, 900 mm sweep 116 Supplyof exhaust fan shutter type,200mm sweep, 230V, 50HZ,30-40W, 1300 rpm, 500 CMM, 30-40db noise level, automatic shutter 117 Supply of suitable size PVC/GI modular boxwith modular plate, cover, providing and fixing one number of 3 pin 5/6 A modular socket outlet (2M) and one number of 5/6 A modular switch (1M), including providing connections etc. as required. (3M) 118 supplyofsuitable size Gl/PVC box with modular plate, cover, providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlets (2M) and 2 Nos. 5/6 A modular switches (1M) including providing connection etc. as required - Computer point (8M) 119 Supplying of Concealed Mode PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) and one number of 15/16 A modular switch (1M). (3M) 120 Supplying of Concealed Mode PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) for Split AC. 121 Supply of 8 way (MCCB +3 x 8)(VTPN) , sheet steel, 415 V, MCB double door distribution board on concealed mode, 122 Supplying cable end box (IP 43) suitable for three phase and neutral, Vertical (VTPN) MCB DB 123 Supplyof 8 way (8+ 18 ) horizontal type three pole and neutral (TPN) on surface/on concealed mode, 124 Supply of9 ModuleIP 65 Hensel Box 125 supply 160A, 25 kA rating and breaking capacity 4 Pole MCCB with Thermal magneti 126 Supply of Three pole 63A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 127 Supply of Three pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 128 Supply of four pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 129 Supply of four pole (three phase and neutral),40 A,415V, RCCB, having a sensitivity current of 30mA 130 Supply of four pole (three phase and neutral),63 A,415V, RCCB, having a sensitivity current of 100mA 131 Supply of Single pole 16/20/25A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 132 Supply of single pole 6/10A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 133 Supply of single pole blanking plate in the existing MCB DB/Modular switch board complete etc. as required. 134 Supply of one run Aluminium Conductor 4 core X70 Sq.mm A2XFY Insulated, 135 Supply of one run Aluminium Conductor 4 core X 16 Sq.mm A2XFY Insulated, 136 Supply of one run Aluminium Conductor 4 core X 10 Sq.mm A2XFY Insulated, 137 Supplyof 10 SWG Copper wireconductorfor earthing 138 Supply of12 SWG Copper wireconductorfor earthing 139 Supply of compression gland andHeavy duty Aluminium long barrel lugs for 4 X 70 sq. mm 140 Supply of compression gland andHeavy duty Aluminium long barrel lugsfor 4 X 16 sq. mm 141 Supply of compression gland and Heavy duty Aluminium long barrel lugs for 4 X 10 sq. mm 142 wiring oflight point/ fan point/ exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated, 650V, 143 Wiring of circuit/ submain wiring alongwith earth wire 2x1.5 sq.mm + 1x1.5 sq.mm earth 144 Wiring of circuit/ submain wiring alongwith earth wire 2x2.5 sq.mm + 1x2.5 sq.mm earth 145 Supply ofPIR Motion Sensor 146 Supplyofextradown rod of 19 mm dia heavy gauge including painting etc required for ceiling fan 147 Supply of100 mm Width x 50 mmdepth x 1.6 mm Thickness perforated painted with powder coating MS cable tray 148 Installation of600X600 mm, 230VAC, 1Ø, LED light fitting with supporting brackets and chain as required. 34-36W 149 Installationof 230VAC, 1Ø, 12-15 Watts LED modular recess Down light fitting with supporting bracket/chain complete accessories as required 150 Installationof 230VAC, 1Ø, 6-10 Watts LED modular recess Down light fitting with supporting bracket/chain complete accessories as required 151 Installationof 18W, 1700- 2100 lumen output, 230V AC,50 Hz, 18-20W 18-20W 4F/1200mm length, T5 LED tube integral light fittings . 152 InstallationofBLDCwall fan ,400 mm sweep,230 v AC 153 Installation of LED mirror light fitting with supporting bracket as required. 154 Installation of Ceiling fan BLDC, 230V, 50Hz, 5 star rating1200 mm sweep 155 Installation of Ceiling fan BLDC, 230V, 50Hz, 5 star rating900 mm sweep 156 Installation of exhaust fan shutter type, 230V, 50HZ, 30-40W, 1300 rpm, 200 mm sweep , 30-40db noise level, automatic shutter 157 Installationsuitable size PVC/GI modular boxwith modular plate, cover, providing and fixing one number of 3 pin 5/6 A modular socket outlet (2M) and one number of 5/6 A modular switch (1M), including providing connections etc. as required. 158 Installation ofsuitable size Gl/PVC box with modular plate, cover, providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlets (2M) and 2 Nos. 5/6 A modular switches (1M) including providing connection etc. as required - Computer point (8M) 159 Installationof Concealed ModePVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) and one number of 15/16 A modular switch (1M). (3M) 160 Installationof Concealed Mode PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M). 161 Installation of 8 way (MCCB +3 x 8)(VTPN) , sheet steel, 415 V, MCB double door distribution board on concealed mode, 162 Fixingcable end box (IP 43) suitable for three phase and neutral, Vertical (VTPN) MCB DB 163 Installation of 8 way (8+ 18 ) horizontal type three pole and neutral (TPN) on surface/on concealed mode, 164 Installation of8 way HENSEL BOX 165 Installation of 160A, 25 kA rating and breaking capacity 4 Pole MCCB with Thermal magnetic 166 Installation of Three pole 63A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 167 Installation of Three pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 168 Installationof four pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 169 Installationof four pole (three phase and neutral),40 A,415V, RCCB, having a sensitivity current of 30mA 170 Installation of four pole (three phase and neutral),63 A,415V, RCCB, having a sensitivity current of 100mA 171 Installation of Single pole 16/20/25A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 172 Installation of single pole 6/10A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 173 Installation of single pole blanking plate in the existing MCB DB /Modular switch board complete etc. as required. 174 Installation of one run Aluminium Conductor 4 core X70 Sq.mm A2XFY Insulated, On wall 175 Installationof one run Aluminium Conductor 4 core X 16 Sq.mm A2XFY Insulated, 176 Installationof one run Aluminium Conductor 4 core X 10 Sq.mm A2XFY Insulated, 177 Laying 10 SWG Copper wireconductorfor earthing 178 Laying 12 SWG Copper wireconductorfor earthing 179 Installation of compression gland andHeavy duty Aluminium long barrel lugs for 4 X 70 sq. mm 180 Installationof compression gland andHeavy duty Aluminium long barrel lugsfor 4 X 16 sq. mm 181 Installation of compression gland and Heavy duty Aluminium long barrel lugs for 4 X 10 sq. mm 182 Installation of light point/ fan point/ exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated, 650V 183 Installation ofcircuit/ submain wiring alongwith earth wire 2x1.5 sq.mm + 1x1.5 sq.mm earth 184 Installation of circuit/ submain wiring alongwith earth wire 2x2.5 sq.mm + 1x2.5 sq.mm earth 185 Installation ofPIR Motion Sensor 186 Installation ofextradown rod of 19 mm dia heavy gauge including painting etc required for ceiling fan 187 Installation of 100 mm Width x 50 mmdepth x 1.6 mmThickness perforated painted with powder coating MS cable tray 188 Dismantling of existing switch boards,lights , fans, disconection of all cableswith all accessories and transporting to site specified by engineer in charge. 189 Supply,Installation, termination, testing andcommissioningof Back box complete with all respects Complying with relevant standard specification, as directed by the Engineer-in-charge.Acceptable Make :Legrand/Schneider/Substantially equivalent 190 Supply, Installation, termination,testing and commissioning modular of Single Port Faceplate for CAT3rate shall be include nessary accessories like screw, proper labelling with color code, etc ., as complete with all respects complying with relevant standard specification, as directed by the Engineer-incharge.Acceptable Make :Legrand/Schneider/Substantially equivalent 191 Supply, Installation, termination,testing and commissioning of RJ11 Outlet with all accessories as requiredin complete as per specification.Acceptable Make :Legrand/Schneider/Substantially equivalent 192 Supplying and laying of2 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable throughexisting surface/through wall/through floor, through concealed PVC conduit as per site conditionAcceptable Make: Havells/ Polycab/ Finolex/ Substantially equivalent 193 Supply and laying of10 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable throughexisting surface/through wall/through floor, through concealed PVC conduit as per site conditionAcceptable Make :Havells/ Polycab/ Finolex/Substantially equivalent. 194 Supply and laying of20 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable throughexisting surface/through wall/through floor, through concealed PVC conduit as per site condition Acceptable Make :Havells/ Polycab/ Finolex /Substantially equivalent. 195 Supply, installation, termination, testing and commissioning of 20 Pair MDF Box with Krone Modules with all accessoriesper site conditionAcceptable Make :ADC-Krone/Bestnet/Substantially equivalent 196 Supply, Installation, termination, Testing andCommissioning of One Plus One Phone(Boss-Secretary Type Phone),2 Base Unit, 2 Handset,2 no of six point Rosette Box, 2 Data Cord,Line Cord,Power AdapterAcceptable Make: Beetel M78/Substantially equivalent 197 Supply, Installation, termination, Testing and Commissioning of Analogue phones with LCD display, caller id and 5 station redial memory. Acceptable Make :Panasonic KX-TSC62SX/Substantially equivalent 198 Supply, Installation, termination,Testing andCommissioning of Analogue phones.Acceptable Make :Panasonic KXTS400SX/Substantially equivalent 199 Supply, laying and fixing of 20mm size PVC conduit along with accessories in surface/ recess concealed manner including cutting the wall/floor and making good the same in case of recessed conduit as required.Reputed Make 200 Supply of Aircooled VRF ODU-44 HP Module. The outdoor units shall be capable to provide project capacity as specified in scope of work and Technical specification using combinations of twounits only. 201 22 HP OUTDOOR UNIT 202 Supply of VRF Cassette type Indoor Units:The minimum capacity to be supplied asmentioned below: 203 1.0 TR 1 Way Cassette with wireless remote and panel 204 4.0 TR 4 Way Cassette with wireless remote 205 Supply of VRF Wall mounted unit Indoor Units:The minimum capacity to be supplied as mentioned below: 206 0.6 TR Hi wall 207 0.8 TR Hi wall 208 1.0 TR Hi wall 209 1.3 TR Hi wall 210 1.6TR Hi wall 211 Supply of Y-Joints/ T joints/ Header Joints as per the layout.Make as per equipment manufacturer 212 Outdoor connection kit 213 Y-Joints 214 INSTALLATION,TESTING ,COMMISSIONING AND HANDING OVER OF VRF UNITS 215 22HP OUTDOOR UNIT 216 1.0 TR 1 Way Cassette 217 4.0 TR 4 Way Cassette 218 0.6 TR Hi wall 219 0.8 TR Hi wall 220 1.0 TR Hi wall 221 1.3 TR Hi wall 222 1.6TR Hi wall 223 Installation ,testing & commissioning of Y-Joints/ T joints/ Header Joints as per the layout. Make as per equipment manufacturer 224 Outdoor connection kit 225 Y-Joints 226 REFRIGERANT PIPING 227 Outdoor connection kit 228 perforated cable tray with cover 1.2 mm thick 100/150 mm width 229 CONTROL CABLINGSupply, Installation, testing and commissioning of cu. cable for control cum trans-mission between Indoor unit and Out Door Unit through PVC Conduit.Make : Havells, Finolex, RR, equivalent 230 1.5 sq.mm,3 core 231 CONDENSATE DRAIN PIPINGSupply and fixing in position of condensate drain water & indoor unit drain to the drain point indicated by plumbing department. Piping with 10 mm thk Closed Cell insulation, stuck with approved adhesive compound and with necessary fittings like elbows, tees and reducers etc.Make : Finolex, Supreme, any equivalent 232 UPVC or PVC pipe with 10 mm thk Closed Cell insulation. 233 REFREGERANT GAS 234 Supply, Filling, testing, commissioning including topping up of R410 A Refrigerant. 235 LOADING / UNLOADING 236 Lifting, shifting & positioning of VRF Condensing unit on ODU Platform. 237 Vibration Isolator pad for mounting the Condensing unit on the MS Structure 238 MODULAR TYPE OUTDOOR SUPPORT
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Kerala View Result →
45.
Tourism #10273448 Price Bid
Tender For Supply Installation Testing And Commissioning Of 125 Kva Dg Set At Ktdc-Aqua Land Kollam - Supply, Installation, Testing and Commissioning of 3 phase 125kVA Diesel-Generator set with acoustic enclosure as per CPCB 4 plus norms suitable for placing in the outdoor with the following specifications. (Make-Cummins, Kirloskar, Caterpillar,Volvo-Eicher) 2 Engine 3 Suitable HP rated Water / liquid cooled, Radiator type, turbo charge aspirated 4 Stroke Electric Start engine with automatic speed regulation / digital engine governing system of Cummins Powerica / Cotton / KOHLER / Caterpillar or equivalent make to develop mechanical output so as to satisfactorily generate full load Electrical output in par with the Alternator specifications as per given below without sag in line parameters at Electrical side as recommendedby the OEM 4 Alternator 5 100kW Brushless, Self-excited, Self-regulated alternator suitable for continuous operation at 1500rpm with Automatic voltage regulation system to Generate 3 Phase, 4 Wire 415V +/- 1 % AC 50Hz at 0.8 lag pf Supply, insulation class F/H, 2/3 pitch, double layer lap wound stator winding, dynamically balanced rotor, low THD conforming to BS 5514 & ISO 3046 of Stamford / Crompton / BHEL or equivalent make as recommended by the OEM. 6 Accoustic Enclosure 7 Canopy type Acoustic enclosure including air intake / exhaust baffles, sliding doors with suitable hinges, locks etc. for the DG sets using acoustically treated panels housed in 1.6 & 3mm / 0.5mm CRCA / LCMS / HRCA sheet steel section filled with special grade 100 mm Thick 96 kg/m3 Density Rock Wool, covered with R. P. Tissue Paper and Expended metal on wall specially designed for optimum sound attenuation with frameworks complete with inspection lamps, inspection glass window, provision for Cable Entry, control cables, etc. complying to IS 8183. 8 Generator Control Panel 9 Dust tight, vermin proof GCP falling to IP43 category fabricated out of 16 / 18 SWG CRCA Sheet Steel painted as per standards of the following specifications ( All switches shall confirm to conforming to IEC 60947-2 standards). 10 The Panel shall be provided with Digital Engine Controller unit suitable for integration to AMF Relay system, suitable rating MCCB/MCB with O/C & S/C Protectionas recommended by OEM, TPN best conductivity busbar with SMC supports, heat shrinkable sleeves etc. capable to handle generator full load current. 11 Suitable rating Class 1.0 Metering CTs per phase as recommended by OEM, multifunction / induvidual meters to read current in each phase, line to line and phase voltages, frequency, energy generated ( Wh) per phase and cummilative, hours of operation, powerfactor status, RYB Phase indicators ( LED Pilot type ) with suitable rating control MCB including all necessary control wiring etc. complete as per standards. ( Note : - The GCP shall meet all the statutory requirements complied with the Kerala State Electrical Inspectorate ) 12 Stantard accessories 13 Both Engine & Alternator shall be suitably coupled and mounted on common channel iron base frame with standard accessories such as anti vibration pad, required capacity battery, suitable battery-charger unit with charging arrangements from direct mains, As per OEM standards Capacity Diesel tank, residential type silencer, suitable cable termination box etc. complete as per Electrical Inspectorate standards, rules & regulations 14 The DG Control Panel shall be compatible for PLC based Auto mains failure system employed in the Main Panel. 15 125 kVA DG SET 16 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clampsnot exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 120 sq mm 17 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clampsnot exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 150 sq mm 18 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm) 19 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm) 20 Supply and laying 4Cx1.5 sqmm armoured copper control cable along with main cable through trench/wall/ ceiling 21 Supply and laying 2Cx2.5 sqmm armoured copper control cable along with main cable through trench/wall/ ceiling for the battery charging. 22 Providing cable glanding for 4C x 1.5 sqmm & 2C x 2.5 sqmm control cable using Siemens type Brass compression gland & Copper lugs etc. complete 23 Supply, installation, testing and commissioning of outdoor type panel conforming to IP 65 standards with200 A 4P Automatic Transfer Switch, 2 P selector switch, MCB for battery charger, indication light, ON Delay timer, UV and OV relays and other necessary components for the proper working of the electricalsystem. 24 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required. 25 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done byoverlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 26 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required 27 Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required 28 Supplying and fixing of MS, B Class exhaust gas pipe of dia. upto 100mm conforming to IS:3589 cut to required lengths along with necessary bends,supports,clamps,anti-vibration mountings etc. as requiredupto the top of the nearest building as per pollution control board norms. 29 Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels. 30 Generator roofing 31 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete 32 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete 33 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum toavoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required 34 Providing and fixing of color coated PVC rain water gutter of standard size as per the site requirement 35 DG operating sanction 36 Preparation and submission of latest scheme drawings before the Electrical Inspectorate, obtaining approval, arranging inspection and obtaining sanction orders for the newly installed DG set etc. completeincluding statutory expenses. 37 Preparation and submission of latest scheme drawings to KSEB for obtaining sanction for power allocation (Including all incidental and statutory expenses) . 38 Charges for dismantling and moving the existing 3-phase 62.5 KVA DG set (including change over switch, cables etc.) to a nearby location, demolition of the wall of the existing DG room for the installationof a new 125 KVA DG set, if necessary, etc. complete as per the direction of the site engineer.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Kerala View Result →
46.
Health and Family Welfare #10267207 Price Bid
Cardiac Cath Lab With Ep Facility Model A , Cathlab Machine As Per The Specification Except The Following , Medical Grade Large High Definition Fhd Display 55 , Four Medical Grade High Definition Display Lcd / Led Flat 19 Or Higher Monitors With Wide Viewing Angle, High Luminance High Contrast, Flicker Free, Distortion Free , Electrophysiology Application , Workstation As Per Spec , High Pressure Injector With 200 Syringes , Online Ups For Cathlab & Accessories , Console, Workstation, Lights And Computer , All In One Computer With Laser Printer , 12 Channel Ecg With Pc Connectivity , Full Wrap Around Lead Aprons , Skirt ( With Fastening Belt ) -Vest Type Lead Aprons , Front Fulltype Lead Apron , Light Weight Leadless Single Piece Aprons With Front And Back Coverage , Light Weight Leadless Skirt And Vest With Fastening Belt , Thyroid Guard Lead Less , Leadless Head Gear Radiation Protection And Light Weight Lead Goggles , Lead Stockings , Lead Spectacles , Lead Gloves , Heavy Duty Stand With Hangers To Hold Atleast 5 Lead Aprons ( Stainless Steel 304 Construction ) , Wall Mounted Hangers To Hold Atleast 5Lead Aprons , Intercom Between Exam And Control Room , Instrument Table , Accessory Table , Buy Back Offer Of Existing Cathlab Model Philips Allua Fd10 Installed At Mch Kottayam , 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , 15.12.1 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , 15.12.2Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead: Of Area Beyond 3 Sq. Metre , 15.23.1Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , 15.57 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge , 2.34.1Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% , 2.35.1.1Diluting And Injecting Chemical Emulsion For Post -Constructional Anti-Termite Treatment ( Excluding The Cost Of Chemical Emulsion ) :Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Litres / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300Mm Including Excavation Channel Along The Wall & Rodding Etc. Complete: With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration , 24.2Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side Of Building / Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40 Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Chakkus, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: - ( 1 ) The Evaluational Area Of The Scaffolding Shall Be Measured For Payment Purpose, ( 2 ) The Payment Will Be Made Once Only For Execution Of All Items Of Such Works. , 15.60 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved , 50.2.25.1 Filling With Contractors Own Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M As Per Direction Of Site Engineer-In-Charge , 50.4.1.1 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size ) Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing For Leveling Coarse Of Floor And Roof Etc. , 50.5.5Reinforced Cement Concrete Work In Arches, Archribs, Domes, Vaults, Shells, Folded Plate And Roof Having Slope More Than 15 Degree Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size ) . , 50.5.33.2 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Above Plinth Level Upto Floor V Level , 5.22.1 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelmild Steel And Medium Tensile Steel Bars , 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platform , 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil , 6.26.2Brick Work With Common Burnt Clay Selected F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) Above Plinth Level And Upto Floor V Level , 50.6.1.2Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand ) Etc Complete. , 50.6.1.8 Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In: Cm 1:6 ( 1 Cement : 6 Coarse Sand Etc Complete , 50.6.3.2 Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x10 Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level For 10 Cm Thick Wall In : Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Including Cost Of Scaffolding Complete , 13.1.1Cement Plaster12 Mmof Mix: 1:4 ( 1 Cement : 4 Fine Sand ) , 13.7.1Cement Plaster 12 Mmfinished With A Floating Coat Of Neat Cement Of Mix: 1:3 ( 1 Cement : 3 Fine Sand ) , 11.37Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) , Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600 X 600 Mm. , 11.41.3 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 800X 800 Mm , Od31976 / 2023_2024Providing And Fixing First Quality Vitrified Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 11.48.2 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , 11.48.3Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 800X800mm , 11.55.1 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , 50.9.1.1Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) , Using Good Quality Anjili Wood / Jack Wood , 50.9.2.1Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineerin - Charge. Using Anjili / Jack Wood , 21.1.1.2 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portionpowder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) , 21.1.2.2 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides , Od31977 / 2023_2024 Supplying And Fixing Flush Door Shutter, Shutter Of Required Size, Thickness 30Mm Thick, Finished With 1 Mm Laminate Of Approved Shade With 9 X 16 Clear Glass Vision Panels As Per Design Including Necessary Hinges , Od31978 / 2023_2024 Frosted Film - Supply And Installation Of 3M Make Frosted Film Pattern Throughout All The Internal Glass Panels Wherever Required Of Approx. 1.5 M Height As Per The Approved Pattern. , Od31979 / 2023_2024 Providing And Fixing Extruded Section Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm ) , With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete , Od31980 / 2023_2024 Providing And Fixing 4.00 Mm Thick Acp Sheet For Cupboard Including All Cost, Conveyance, Labour Charges Etc Complete , 21.3.1 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 4.0 Mm Thickness , 12.45.2 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board Conforming To Is; 2095-Part I , 12.54.1 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Soffit With Help Of Soffit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Sixe38x12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C / C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms / Sqm ( Both Side Inclusive ) , Fixing With Clip In Tiles Into Spring T With :Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25 Mm Height, , Made Of G.I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending . , 12.58.1 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Space Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening Of Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process To Give Stable Crystalline Structure With Minimum Compressive Strength 225 Kg / Sq. Cm, Bending Strength 100 Kg / Sq. Cm, Of Size 595X595 Mm, Having Perforation Of Dia, 10 Mm With Minimum Perforated Area 18% With Non Woven Tissue On The Back Side, Having An Nrc ( Noise Reduction Coefficient ) Of 0.85, With 50 Mm Thick Rockwool Of 48 Kg / Cum Backing. , 21.4.2Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is: 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors, Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer -In- Charge.With Brass Cover Plate Minimum 1.25 Mm Thickness , 21.13 Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , 50.9.11.1Providing And Fixing Thomson Multi Wood Board Or Equivalent Make Paneling 12 Mm Thick, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately ) As Per The Direction Of Site Engineer-In-Charge. , 50.9.12.1 Providing And Fixing Thomson Multi Wood Board Or Equivalent Make, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer ( Fittings To Be Paid Separately ) As Per The Direction Of Site Engineer-In-Charge. , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.69.1 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work , 13.80Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 13.83.2Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour.Two Coats , 13.47.1Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) , 10.16.3 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Electric Resistance Or Induction Butt Welded Tubes , Od31981 / 2023_2024Roofing Sheet With Sandwich Puf Roof Panel With 0.40 Mm Or Nearest Size Pre Painted Galvalume Sheet At Top & Bottom , 30 Mm Or Nearest Size Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete , Od31982 / 2023_2024 Wall Cladding With Sandwich Puf Wall Panel With 0.40 Mm Or Nearest Pre Painted Galvalume Sheet At Top &Bottom , 30 Mm Or Nearest Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete. , Od31983 / 2023_2024 Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500 / 31000 / 40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I / C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses. , 17.2.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , 17.7.1 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , 50.17.1.2 Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge , 50.17.1.5Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 50.17.1.1 Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 17.31 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Od33878 / 2023_2024 Supplying And Fixing Stainless Steel Mirror Finished H Type Handles Including Material Cost, Conveyance And Fixing Charges Etc Complete. , 50.18.7.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 15Mm Dia 12Kgf / Cm2 -Internal Work- Exposed On Wall , 50.18.7.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 10Kgf / Cm2- Internal Work - Exposed On Wall , 50.18.8.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer- In- Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 12 Kgf / Cm2 , 50.18.8.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 32 Mm Pipe 10Kgf / Cm2 , 50.18.8.9.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 110 Mm Pipe 6Kgf / Cm2 , 50.18.9.8.2 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching And Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 4 Kgf / Cm2 , Od31984 / 2023_2024 Providing And Fixing 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Pvc Hollow Section Of Size 59 X 24 Mm And Wall Thickness 2 Mm With Inbuilt Edging On Both Sides. The Styles And Rails Mitered And Joint At The Corners By Means Of M.S. Galvanized / Plastic Brackets Of Size 75 X 220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Fixing Galvanized M.S. Tube Of Size 20 X 20 Mm And 1 Mm Wall Thickness. The Lock Rail Made Up Of H Section, A Pvc Hollow Section Of Size 100 X 24 Mm And 2 Mm Wall Thickness, Fixed To The Shutter Styles By Means Of Plastic / Galvanized M.S. U Cleats. The Shutter Frame Filled With A Pvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Fixing Horizontally 6 Mm Galvanized M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge ( For W.C. And Bathroom Door Shutter ) . , Od31985 / 2023_2024 Supplying And Fixing Name Board Of Various Sizes Using Foam Sheet Board Including Lettering As Per The Direction Of Departmental Officers Including Cost, Conveyance And Fixing Charges Etc Complete. 45X14cm Size , Od31986 / 2023_2024 Supplying And Fixing The Name Board Of Size 80 X 30 Using Acp Board With Acrylic Lettering Including Cost, Conveyance And Labour Charges For Lettering And Fixing Etc Complete , Od31987 / 2023_2024 Supplying And Fixing Inaugration Board Using Granite Slab Including Lettering As Per Direction Of Departmental Officers Including Cost Of Granite, Lettering And Fixing Charges Etc Complete. Size: 100X84cm , Supplying And Fixing Skylight Of Size 1.2Mx 1.8M With Designed Acrylic Sheet Including 4 Numbers Led Tube As Per The Direction Of Engineer In Charge , Od31989 / 2023_2024 Computer Chair The Medium Back Adjustable Revolving Chair Made With Mesh Back Within Built Handle In The Nylon Finish, The Back Is Designed Extra Lumber Support. The Seat Have Provided Seat Cover In Pp Made With 12Mm Hot Pressed Ply And Pu Moylded Foam. The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking. The Base And Pin Wheels Are Made In The Nylon. 120Mm H Gas Lift Should Be Provided With Tower Bellow , Od31990 / 2023_2024 High Back Chair Made With Feather Foam Seat & Mesh Back With Lumber Support. , The Gas Lift Mechanism Should Be Tested As Per Bifmastandards. The Pedestal Should Be Five Legged Injection Mouldedin Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, It Should Have Synchro Any Anglelocking Arrangement , Od31991 / 2023_2024Providing And Fixing Trap Doors For Access To The Areas Above False Ceiling. The Trap Door Shall Have An External Frame Made Of Powder Coated Aluminium Channel On Which The Shutter Is Hinged. Shutter Shall Be Made 3 Mm Thick Acp Sheet Shutter External Frame Of Shutter Made Of Powder Coated Aluminium Channel. Concealed Heavy Duty Hinges Shall Be Used To Mount The Shutters And Locking Shall Be Provided. The Shutter Shall Be Moulded In Level With The False Ceiling Forming A Groove All Around. Sufficient Number Of Hinges And Locks Shall Be Provided To Avoid Sagging Of The Shutter. Key Also Shall Be Supplied. No Extra Rate Shall Be Provided For Suspenders Or Frame Works All Round For Linking The Trap Door To Gyp Board / Any Other False Ceiling. The Rate Including All Labour Charges , Material Charges Ect Complete. , Od33559 / 2023_2024 Supplying And Laying Polyster , Washable And Stainfree Cloth ( Bio-Active Fabric Washable Germfree-Suitable For Icu Room ) Curtain System With Maximum Curtain Cloth Height 230Cm ( Top 30 Cm White Colour Net And 200Cm Light Blue Colour As Per Approval ) Stitching With Stifiner Tape, Pleats, Ironing And Laying In Icu Room Around Each Bed Using Pvc Runner With Hooks&Stopper For Hanging / Sliding Etc. As Per The Direction Of Engineer In Charge Including Conveyance To Site , Laying In Line And Level , Sealing All Cuttings In False Ceiling With Powder Coated Ms Cup , All Leads And Lifts Including All Labour Charges Etc. Complete. ( Unpleated Length Of The Cloth Maesurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measuremnet ) / Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube Hanging Support Of Required Length ( App. Length 1.10M ) One End Fixing From Slab By Using 6Mm Dia. Expansion Bolt At A Distance Not More Than 2 M, C / C Down End Fixed To Powder Coated Aluminium Channel Frame 45X20mm X1mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level , Sealing All Gaps In False Ceiling Due To Hanging Supports , All Leads And Lifts, Including All Labour Charges Etc. Complete. , Od33560 / 2023_2024 Providing And Fixing Vertical Blinds As Per The Direction Of Engineer In Charge , Furniture& Other Works: Lead Lined Door Shutters: 2Mm Lead Lined Door Shutterswithsolid Cored ( 30Mm ) Lead ( 2Mm ) Lined Flush Door Side Hung Two Rebated Shutters With Plywood ( 6Mm ) & Laminated ( 1Mm ) On Both Sides And All Accessories ( Ss Hinges ( 4 Nos ) , Tower Bolt , Ss Handles Etc.. ) , Lead Lined Door Frames: Lead ( 2Mm ) Lined Flush Door Side Hung Single Shutter With Plywood ( 6Mm ) &Laminated ( 1Mm ) On Both Sides And All Accessories ( Lead Sheet Should Overlap Door Frame & Wall ) Includingproviding Wood Work In Frames Of Doors And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length , Using Good Quality Anjili Wood / Jack Wood ( Frame Size 12 Cm X 8 Cm ) , Wood Frame For Fixing Lead Glass ( Lead Sheet Should Overlap Door Frame & Wall ) , Steel Cupboard ( Godrej ) For Storage 6Ft Tall 3 Feet Width , Cupboardfor Storage Of Catheters , 6Ft Tall 3 Feet Width.19 Mm Ply Board Construction Laminate Finishpainted ( Enamel ) As Per Approval. Front Panels To Have A Locking Arrangements With One Panel Having Tower Bolt On The Inner Sidewith Handles , Magnetic Hinges Andall Complete , Providing, Fixing And Installation Of Floor Mounted 2 Bay Scrub Station Made Of Ss 304 1.6Mm Thk. Sheet Withtimeout Facilities, Foot Operated With Hot And Cold Water Mixture Complete With All Fittings Etc. Satin Finish And Most Optimal Ra Value. Elbow Operated Water And Hand Scrub. Curved Joints To Avoid Microbial Deposition And Growth, Ensuring Perfect Hygiene And Ease Of Cleaning. The Station Shall Be Equipped With Soap Dispensers. Easily Openable For Refilling The Hand Scrub / Routine Maintenance. Two Bay 63”X29”44” , Catheter Hanger And Wall Clamp Ss304 For 5 Aprons Including All Materials And Fittings , Lead Apron Hanger. Completely Made Of Ss304. Provision To Hang 10 Aprons. The Hanger Should Be 2Ft Width. Shoould Have Strong Base For Stability. The Width Of The Total Assembly Shall Be 3.5Ft Width And 2 Ft Depth. The Height Shall Be 153 Ft. , Providing And Fixing 2.0Mm Th. Vinyl Floor With Rubber Based Adhesive Over Clean And Smooth Surface Including Finishing By Rolling A Light Roller All Complete. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Wiring For Group Controlled ( Looped ) Light Point / Fan Point / Exhaust Fan Point / Call Bell Point ( Without Independent Switch Etc. ) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B , Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. Group C , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X 2.5 Sq. Mm + 1 X 2.5Sq. Mm Earth Wire , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.4 X 6 Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 3 X 1.5 Sq.Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.3 X 2.5Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 3 X 4 Sq. Mmm , Supplying And Drawing Following Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor, Unarmored Telephone Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.2 Pairs , Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface / Recessed Steel / Pvc Conduit As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25Mm , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required1 Run Of Cable , Cat 6 Rj 45 Computer Jack Modular Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5 / 6 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 2 Way 5 / 6 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15 / 16 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5 / 6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15 / 16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Telephone Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Tv Antenna Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 1 Or 2 Module ( 75Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 3 Module ( 100Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 6 Module ( 200Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 8 Module ( 125Mmx125mm ) , Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Extra For Fixing The Louvers / Shutters Complete With Frame For An Exhaust Fan Of All Sizes , Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Color Washing Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep , Supply Of 300 / 305 Mm Sweep Light Duty Exhaust Fan In Metal Frame Working On230 Va / C , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required4 Way ( 8+12 ) - Three Phase Double Cover ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required6 Way ( 8+18 ) - Three Phase Double Cover ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way ( 8+12 ) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp / Tp Mcb As Outgoing ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way ( 8 + 18 ) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp / Tp Mcb As Outgoing ( Ip 42 / 43 ) , Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface / Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 2+12 Way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Double Pole, ( Single Phase And Neutral ) , 240 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , Supplying And Fixing Following Rating, Four Pole, ( Three Phaseand Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Dbcomplete With Connections, Testing And Commissioning Etc. Asrequired. 63 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, ( Three Phase And Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240 / 415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , Supplying And Fixing Following Rating, Three Pole, Mcb63 A Rating, 3 Pole, Mcb , Supplying And Fixing Following Rating, Three Pole, Mcb 40 A Rating, 3 Pole, Mcb , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required100 Amp, 30 Ka 4 Pole , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required125amp, 36Ka , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required. 16A -100A, 35 / 36 Ka ( Ics=100%Icu ) , 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm ( Clamped With 25X3mm Ms Flat Clamp ) , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 185 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 240 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 25 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 50 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 10 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 16 Sq Mm With Factory Made Clamp , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 70 Sq Mm , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armoured Aluminum Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 70 Sq Mm , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.225Mm Width X 50Mm Depth X 1.6Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays Bends With Perforation Not More Than 17.5%, , Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etcas Required 225 Mm Width X50 Mm Depth X 1.6 Mm Thickness , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 50 Sqmm , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1 / 2X 70 Sq. Mm ( 38Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 95 Sq. Mm ( 45Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 185 Sq. Mm ( 57Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 240 Sq. Mm ( 62Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 10 Sq. Mm ( 25Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 16 Sq. Mm ( 28Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 25 Sq. Mm ( 28Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 50 Sq. Mm ( 35Mm ) , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 16 Sq.M , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required.25 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required.10 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 50 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.25 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.16 Sq.M , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.10 Sqmm , Supplying And Providing Earth Clamps For Siemens / Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required.25Sq - 95Sq Mm With 20 Mm Wide X 1.20 Mm Thick Clip , Supplying And Providing Earth Clamps For Siemens / Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required. 4Sqmm-16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required2.65 Mm Copper Conductor ( 12 Swg ) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg ) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required4.00 Mm Copper Conductor ( 8 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.2.65 Mm ( 12 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 3.15 Mm ( 10 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 4.00 Mm ( 8 Swg ) , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal / Coke And Salt As Required. , Supply And Clamping The Following Size Of Strips On Surface Of Wall / Parapet / Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Color Washing Etc. As Required ( For Horizontal Run ) 25 X 3 Mm Copper Strip , Supplying, Threading, Laying And Jointing Of The Following Sizes Of B Class Gi Pipe With All Required Accessories In Ground In Trench As Protective Covering To Earth Leads40mm Dia , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Meter Below Ground As Strip Earth Electrode, Including Connection / Terminating With Nut, Bolt, Spring, Washer Etc. As Required. ( Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm ) , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required2.00 Mm Copper Conductor ( 14 Swg ) , Supply Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From Crca Sheet 0.5Mm Thickness With All Accessories And Lamps Directly On Wall And Giving Connections With 16 / 0.20 Mm 3 Core Pvc Insulated And Sheathed Round Copper Conductor Flex Wire Or Extending The Original Wiring And Giving Connections As Required 1200 Mm 1X20w Led Lamp With Box Type Fixture , Supply & Installation Of Light Fittings On Tw Round Block
Supply, Conveyance Installation Testing And Commissioning The Light Fittings Of Following Types Made Of Crca With 0.5Mm Thickness Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16 / 0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.1200Mm 1X20w Led Lamp With Box Type Fixture , Recess Mounted Led Luminaire With Full Diffuser Type Upto 36 W ( Max ) , 2X2 Led, Cool White, 5700K, White Powder Coated Crca Housing, Wipro Crco10r038hp57gl1 Or Bajaj Bzrsql 36W Gzi Cw Or Equivalent , Frame For Fixing Recess Mounted Led 2X2 Ft Luminaire 608 Mm X 608 Mm , Recess Mounted Circular Led Retrofit Downlighter, 15W, Powder Coated White Finish, Bpslr 15W Wh Bajaj Or Equivalent , Supplying And Fixing Of 6 / 7 W Pin Type Led Bulb In The Existing Angle Batten Etc As Required ( Philips, Wipro Or Similar Superior Make ) , Sitc Of 400Mm Sweep Meduim Duty Wall Fans With Metallic Vanes ( Make: M / S Almonard / Crompton / Bajaj Or Equivalent ) , Abc Powder Type Fire Extinguisher With Nabl Approval, Fights Class A, B, C And Electrically Started Fires. , Fire Extinguisher Carbon Di-Oxide Type With Nabl Approval , Charges For Dismantling The Existing Electrical Installations Complete Making Good The Damages Of The Wall And Conveying The Dismantled Materials To Store Etc As Required. , Numbering Of Ceiling Fan / Exhaust Fan / Fluorescent Fittings As Required. , Copper Pipe With Superlon Insulation For Suction And Discharge , Pvc Drain Pipe With Proper Insulation , Weather Proof 3 Core Copper Wire For Indoor To Outdoor Connecting Cable ( Size As Per The Requirement Of Ac Manufacturer ) , Core Cutting Charges Including Making The Surface Finished With Plastering And Painting, Making Good And Finishing With Matching Surface After Housing Pipe Etc. , Supporting Stand For Fixing Outdoor Unit ( Powder Coated ) , 4 Kva Voltage Stabilizer Wall Mount Type With Time Delay, High& Low Voltage& Thermal Overload Protection, Input Voltage: 170-220V, Output Voltage : 200-240V, High Voltage Cut Off : 240V, Efficiency: >95%, Frequency : 50Hz, V Guard Vg 500 Or Equivalent , Supply, Conveyance Testing And Commissioning Of 2 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar / Lg ( Dual Inverter Type ) / Voltas / Mitsubishi Or Superior Superior Brands, Cooling Capacity 6000 Kw / Hr With Rotary / Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500 / 450, Led / Lcd Display , Supply, Conveyance Testing And Commissioning Of 1 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar / Lg ( Dual Inverter Type ) / Voltas / Mitsubishi Or Superior Brands, Cooling Capacity 3000 Kw / Hr With Rotary / Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500 / 450, Led / Lcd Display , Sitc Of 19 Mm Thick Nitrile Rubber For Under Deckinsulation , Charges For Cutting Holes Suitable For Accommodating The Supply Ducts Including Plastering, Color Washing Etc. As Required. , Outdoor Unit Stand With Ribbed Rubber Pads , Electrical Cabling Between Indoor And Outdoor Units, With Required Size Cables / Wires ( Havells / Rr Kabel / V-Guard Frls Wires ) , Supply, Installation, Testing And Commissioning Upvc Drain Pipe 6Kg / Sq.Cmof Suitable Dia Connecting The Drain Pan Of The Indoor Units To Nearest Drain Point, With 12Mm Thick Closed Cell Elastomeric Insulation As Per Specification , Motorized Volume Control Damper For Individual Operation Of Ductable Split Air Conditioners , Supply And Fixing Of Canvas Connection And Ribbed Rubber Pads As Vibration Isolators , Providing And Fixing Of Thermal Insulation Lining With 13Mm Thick Nitrile Rubber Closed Cell Type With Adhesive, On Supply Duct. , Providing And Fixing Of Acoustic Duct Lining With 10Mm Thick Nitrile Rubber Open Cell Type Inside The Ducts , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminum Continuous Grilles 150Mm High For Return Air As Per Spec , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminimum Continuous Grilles 150 Mm High For Supply Air With Aluminum Damper As Per Spec , Supply, Installation, Testing And Commissioning Of Volume Control Duct Damper Made Of Extruded Aluminum For Ducts / Collars To Be Provided With Suitable Links, Lebers And Quadrants For Manual Control Of Volume Of Air Flow And For Proper Balancing Of The Air Distribution In The Main Duct Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc., As Per Specifications. , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges , Supports, Gi Rods , Anchor Bolts , Gi Nuts And Bolts, Pvc / Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof / Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 24G , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges , Supports, Gi Rods , Anchor Bolts , Gi Nuts And Bolts, Pvc / Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof / Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 22G , Supply, Installation, Testing And Commissioning ( Sitc ) Of 11 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu / Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring ( Max 3M From Isolator ) And Control Cabling ( Indoor To Outdoor ) , Thermostat Wiring, High-Low Pressure Cut Out, Suitable For Three Phase 440V Supply Etc Complete As Required , Supply And Providing Copper Earth Bus In The Panel Board , Cardiac Catheter Wash Station : Completely Made Ofss 304 Gsatin Finish, All Curved Joints Should Be As Perhtm Standards To Ensureperfect Hygiene And Ease Of Cleaning, Provision Forconnecting The Catheter Using 3 Way Adapter, Provision To Connect Air ( High Pressure ) And Water Through Separate Discharge Pipe Lines To Clean The Catheter, Wall Mounted Type, Approximate Dimension 33”Lx 24”W X 57”H, Provisions To Connect And Clean At Least 6 Catheters Simultaneously. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalised, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Busbars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale. ( 0-200 ) A Class 1 With 90 Deg Defl. Scale Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp Digital Multifunction Meter To Read V, A.Hz, Pf, Kwh Surge Protection Device ( Type1+2 ) Incomer 400A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 200A Copper Tpn Busbar Chamber With Copper Busbar Out Goings 250A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 160A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 100 A Fp Mccb Isolator-2Nos 63 A Fp Mccb Isolator-2Nos The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A / 400A, 50 / 55 Ka ( Ics=100%Icu ) , 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale. ( 0-200 ) A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp, Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh Incomer 250A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 250A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 200 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos. 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos. 63 A Fp Molded Case Circuit Breaker - 2 Nos.The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification , Suitable De- Humidifier Units : Extraction At Least 35 Litres / Day, Compresor : Rotary, Air Flow : At Least 220M3 / Hr, Reputed Brand, Input 230Vac , Charges For Obtaining Electrical Inspectorates Approval Including Scheme Apporval And Final Approval And Regularizing With Kseb , 24-Port Gigabit Manageable Smart Network Switch With 2 Sfps. Rack Mountable , Patch Panel - 24-Port Patch Panel With Cable Tray. Rack Mountable , 4U Rack- Wall Mountable Including 4X 6Amp Power Distribution Box , Supply Of Branded 1Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 2Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 3Mtr Patch Cords With Cat 6 Cable. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale ( 0-200 ) A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp, Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh, Incomer 200A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos Out Goings 160 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos.The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specifications.Pn Busbar Chamber With Copper Busbar. ( Nottaken For Evaluation ) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switch Gears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh Incomer 160A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 160A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 125A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos %Icu= 25Ka ) - 2 Nos 63A Fp Mccb - 3 Nos The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification. ( Not Taken For Evaluation ) , Supply, Installation, Testing And Commissioning ( Sitc ) Of 8.75 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu / Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring ( Max 3M From Isolator ) And Control Cabling ( Indoor To Outdoor ) , Thermostat Wiring, High-Low Pressure Cut Out, Suitable For Three Phase 440V Supply Etc Complete As Required ( Not Taken For Evaluation ) , The Scrub Station Shall Be Made Of High-Grade Stainless Steel 304 With Stain Polish Finish And Wired To The Current Iee Regulations & Bs 7971. The Scrub Stations Control System Shall Be Based On Advanced Microprocessor. The Scrub Station Shall Be Sensor-Activated 24Vac. The Scrub Station Shall Be Provided With User Selectable Time Out Control. The Supply Shall Not Be Interrupted In Case Of Power Failure Or Maintenance. The Station Shall Be Equipped With Thermostatic Mixing Valve To Controls The Temperature Of Hot / Cold Water Supply. The Washing Faucet Shall Be Made Of Chrome Plated Brass Hand. The Station Shall Be Equipped With Soap Dispensers. Two Bay 63”X24”31” ( Not Taken For Evaluation ) , Eto Sterlizer, Sealing Machine & Accessories ( Not Taken For Evaluation ) , Latest Dose Reduction / Image Quality Improvement Packageslike Autoright / Clarity / Optiq. ( Not Taken For Evaluation ) , Cathlab Machine As Per Specifications With 18 Inches Or 46Cms Diagnol Detector Except Monitors ( All Configuration As Per Sr No 13 Except Detector ) ( Not Taken For Evaluation ) , Iabp As Per The Specification ( Not Taken For Evaluation )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
47.
Health and Family Welfare #10267202 Price Bid
Supply of Cardiac Cath Lab With Ep Facility Model B , Cathlab Machine As Per The Specification Except The Following , Medical Grade Large High Definition Fhd Display 55 , Four Medical Grade High Definition Display Lcd / Led Flat 19 Or Higher Monitors With Wide Viewing Angle, High Luminance High Contrast, Flicker Free, Distortion Free , Electrophysiology Application , Workstation As Per Spec , High Pressure Injector With 200 Syringes , Online Ups For Cathlab & Accessories , Console, Workstation, Lights And Computer , All In One Computer With Laser Printer , 12 Channel Ecg With Pc Connectivity , Full Wrap Around Lead Aprons , Skirt ( With Fastening Belt ) -Vest Type Lead Aprons , Front Fulltype Lead Apron , Light Weight Leadless Single Piece Aprons With Front And Back Coverage , Light Weight Leadless Skirt And Vest With Fastening Belt , Thyroid Guard Lead Less , Leadless Head Gear Radiation Protection And Light Weight Lead Goggles , Lead Stockings , Lead Spectacles , Lead Gloves , Heavy Duty Stand With Hangers To Hold Atleast 5 Lead Aprons ( Stainless Steel 304 Construction ) , Wall Mounted Hangers To Hold Atleast 5Lead Aprons , Intercom Between Exam And Control Room , Instrument Table , Accessory Table , Buy Back Offer Of Existing Cathlab Model Philips Allua Fd10 Installed At Mch Kottayam , 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. , 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , 15.12.1 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below , 15.12.2Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead: Of Area Beyond 3 Sq. Metre , 15.23.1Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , 15.57 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Metres Lead As Directed By Engineer - In-Charge , 2.34.1Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% , 2.35.1.1Diluting And Injecting Chemical Emulsion For Post -Constructional Anti-Termite Treatment ( Excluding The Cost Of Chemical Emulsion ) :Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Litres / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300Mm Including Excavation Channel Along The Wall & Rodding Etc. Complete: With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration , 24.2Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side Of Building / Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40 Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Chakkus, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: - ( 1 ) The Evaluational Area Of The Scaffolding Shall Be Measured For Payment Purpose, ( 2 ) The Payment Will Be Made Once Only For Execution Of All Items Of Such Works. , 15.60 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved , 50.2.25.1 Filling With Contractors Own Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M As Per Direction Of Site Engineer-In-Charge , 50.4.1.1 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size ) Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing For Leveling Coarse Of Floor And Roof Etc. , 50.5.5Reinforced Cement Concrete Work In Arches, Archribs, Domes, Vaults, Shells, Folded Plate And Roof Having Slope More Than 15 Degree Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size ) . , 50.5.33.2 Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-20 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note:- Cement Content Considered In This Item Is @ 330 Kg / Cum. Excess Or Less Cement Used As Per Design Mix Is Payable Or Recoverable Separately. All Work Above Plinth Level Upto Floor V Level , 5.22.1 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelmild Steel And Medium Tensile Steel Bars , 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platform , 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil , 6.26.2Brick Work With Common Burnt Clay Selected F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) Above Plinth Level And Upto Floor V Level , 50.6.1.2Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x20cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand ) Etc Complete. , 50.6.1.8 Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In: Cm 1:6 ( 1 Cement : 6 Coarse Sand Etc Complete , 50.6.3.2 Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 40X20x10 Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level For 10 Cm Thick Wall In : Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Including Cost Of Scaffolding Complete , 13.1.1Cement Plaster12 Mmof Mix: 1:4 ( 1 Cement : 4 Fine Sand ) , 13.7.1Cement Plaster 12 Mmfinished With A Floating Coat Of Neat Cement Of Mix: 1:3 ( 1 Cement : 3 Fine Sand ) , 11.37Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) , Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600 X 600 Mm. , 11.41.3 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 800X 800 Mm , Od31976 / 2023_2024Providing And Fixing First Quality Vitrified Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 11.48.2 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , 11.48.3Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 800X800mm , 11.55.1 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , 50.9.1.1Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) , Using Good Quality Anjili Wood / Jack Wood , 50.9.2.1Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineerin - Charge. Using Anjili / Jack Wood , 21.1.1.2 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portionpowder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) , 21.1.2.2 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides , Od31977 / 2023_2024 Supplying And Fixing Flush Door Shutter, Shutter Of Required Size, Thickness 30Mm Thick, Finished With 1 Mm Laminate Of Approved Shade With 9 X 16 Clear Glass Vision Panels As Per Design Including Necessary Hinges , Od31978 / 2023_2024 Frosted Film - Supply And Installation Of 3M Make Frosted Film Pattern Throughout All The Internal Glass Panels Wherever Required Of Approx. 1.5 M Height As Per The Approved Pattern. , Od31979 / 2023_2024 Providing And Fixing Extruded Section Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm ) , With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete , Od31980 / 2023_2024 Providing And Fixing 4.00 Mm Thick Acp Sheet For Cupboard Including All Cost, Conveyance, Labour Charges Etc Complete , 21.3.1 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 4.0 Mm Thickness , 12.45.2 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board Conforming To Is; 2095-Part I , 12.54.1 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing C Wall Angle Of Size 20X30x20 Mm Made Of 0.5 Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300 Mm Center To Centre, Suspending The Main C Carrier Of Size 10X38x10 Mm Made Of G.I Steel 0.7 Mm Thick From The Soffit With Help Of Soffit Cleat 37X27x25x1.6 Mm, Rawl Plugs Of Sixe38x12 Mm And C Carrier Suspension Clip And Main Carrier Bracket At 1000 Mm C / C. Inverted Triangle Shaped Spring Tee Having Height Of 24 Mm And Width Of 34 Mm Made Of Gi Steel 0.45 Mm Thick Is Then Fixed To The Main C Carrier And In Direction Perpendicular To It At 600 Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms / Sqm ( Both Side Inclusive ) , Fixing With Clip In Tiles Into Spring T With :Gi Metal Ceiling Clip In Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25 Mm Height, , Made Of G.I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending . , 12.58.1 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Space Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening Of Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X 1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process To Give Stable Crystalline Structure With Minimum Compressive Strength 225 Kg / Sq. Cm, Bending Strength 100 Kg / Sq. Cm, Of Size 595X595 Mm, Having Perforation Of Dia, 10 Mm With Minimum Perforated Area 18% With Non Woven Tissue On The Back Side, Having An Nrc ( Noise Reduction Coefficient ) Of 0.85, With 50 Mm Thick Rockwool Of 48 Kg / Cum Backing. , 21.4.2Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is: 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors, Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer -In- Charge.With Brass Cover Plate Minimum 1.25 Mm Thickness , 21.13 Providing And Fixing 100 Mm Brass Locks ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , 50.9.11.1Providing And Fixing Thomson Multi Wood Board Or Equivalent Make Paneling 12 Mm Thick, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately ) As Per The Direction Of Site Engineer-In-Charge. , 50.9.12.1 Providing And Fixing Thomson Multi Wood Board Or Equivalent Make, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer ( Fittings To Be Paid Separately ) As Per The Direction Of Site Engineer-In-Charge. , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , 13.69.1 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work , 13.80Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 13.83.2Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour.Two Coats , 13.47.1Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) , 10.16.3 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Electric Resistance Or Induction Butt Welded Tubes , Od31981 / 2023_2024Roofing Sheet With Sandwich Puf Roof Panel With 0.40 Mm Or Nearest Size Pre Painted Galvalume Sheet At Top & Bottom , 30 Mm Or Nearest Size Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete , Od31982 / 2023_2024 Wall Cladding With Sandwich Puf Wall Panel With 0.40 Mm Or Nearest Pre Painted Galvalume Sheet At Top &Bottom , 30 Mm Or Nearest Puf Sheet At Middle Portion , Necessary Overlap At Ends Including Self Screws, Cyclone Washer Etc. Complete. , Od31983 / 2023_2024 Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500 / 31000 / 40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I / C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses. , 17.2.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , 17.7.1 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , 50.17.1.2 Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge , 50.17.1.5Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 50.17.1.1 Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. , 17.31 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Od33878 / 2023_2024 Supplying And Fixing Stainless Steel Mirror Finished H Type Handles Including Material Cost, Conveyance And Fixing Charges Etc Complete. , 50.18.7.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 15Mm Dia 12Kgf / Cm2 -Internal Work- Exposed On Wall , 50.18.7.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 10Kgf / Cm2- Internal Work - Exposed On Wall , 50.18.8.1.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer- In- Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 12 Kgf / Cm2 , 50.18.8.4.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 32 Mm Pipe 10Kgf / Cm2 , 50.18.8.9.1Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Concealed Work, Including Cutting Chased And Making Good The Wall Etc. 110 Mm Pipe 6Kgf / Cm2 , 50.18.9.8.2 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching And Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 4 Kgf / Cm2 , Od31984 / 2023_2024 Providing And Fixing 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Pvc Hollow Section Of Size 59 X 24 Mm And Wall Thickness 2 Mm With Inbuilt Edging On Both Sides. The Styles And Rails Mitered And Joint At The Corners By Means Of M.S. Galvanized / Plastic Brackets Of Size 75 X 220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Fixing Galvanized M.S. Tube Of Size 20 X 20 Mm And 1 Mm Wall Thickness. The Lock Rail Made Up Of H Section, A Pvc Hollow Section Of Size 100 X 24 Mm And 2 Mm Wall Thickness, Fixed To The Shutter Styles By Means Of Plastic / Galvanized M.S. U Cleats. The Shutter Frame Filled With A Pvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Fixing Horizontally 6 Mm Galvanized M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge ( For W.C. And Bathroom Door Shutter ) . , Od31985 / 2023_2024 Supplying And Fixing Name Board Of Various Sizes Using Foam Sheet Board Including Lettering As Per The Direction Of Departmental Officers Including Cost, Conveyance And Fixing Charges Etc Complete. 45X14cm Size , Od31986 / 2023_2024 Supplying And Fixing The Name Board Of Size 80 X 30 Using Acp Board With Acrylic Lettering Including Cost, Conveyance And Labour Charges For Lettering And Fixing Etc Complete , Od31987 / 2023_2024 Supplying And Fixing Inaugration Board Using Granite Slab Including Lettering As Per Direction Of Departmental Officers Including Cost Of Granite, Lettering And Fixing Charges Etc Complete. Size: 100X84cm , Supplying And Fixing Skylight Of Size 1.2Mx 1.8M With Designed Acrylic Sheet Including 4 Numbers Led Tube As Per The Direction Of Engineer In Charge , Od31989 / 2023_2024 Computer Chair The Medium Back Adjustable Revolving Chair Made With Mesh Back Within Built Handle In The Nylon Finish, The Back Is Designed Extra Lumber Support. The Seat Have Provided Seat Cover In Pp Made With 12Mm Hot Pressed Ply And Pu Moylded Foam. The Tilting Mechanism Should Be Synchro-Tilt Mechanism As Per International Ergonomics Standards Any Position Locking. The Base And Pin Wheels Are Made In The Nylon. 120Mm H Gas Lift Should Be Provided With Tower Bellow , Od31990 / 2023_2024 High Back Chair Made With Feather Foam Seat & Mesh Back With Lumber Support. , The Gas Lift Mechanism Should Be Tested As Per Bifmastandards. The Pedestal Should Be Five Legged Injection Mouldedin Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, It Should Have Synchro Any Anglelocking Arrangement , Od31991 / 2023_2024Providing And Fixing Trap Doors For Access To The Areas Above False Ceiling. The Trap Door Shall Have An External Frame Made Of Powder Coated Aluminium Channel On Which The Shutter Is Hinged. Shutter Shall Be Made 3 Mm Thick Acp Sheet Shutter External Frame Of Shutter Made Of Powder Coated Aluminium Channel. Concealed Heavy Duty Hinges Shall Be Used To Mount The Shutters And Locking Shall Be Provided. The Shutter Shall Be Moulded In Level With The False Ceiling Forming A Groove All Around. Sufficient Number Of Hinges And Locks Shall Be Provided To Avoid Sagging Of The Shutter. Key Also Shall Be Supplied. No Extra Rate Shall Be Provided For Suspenders Or Frame Works All Round For Linking The Trap Door To Gyp Board / Any Other False Ceiling. The Rate Including All Labour Charges , Material Charges Ect Complete. , Od33559 / 2023_2024 Supplying And Laying Polyster , Washable And Stainfree Cloth ( Bio-Active Fabric Washable Germfree-Suitable For Icu Room ) Curtain System With Maximum Curtain Cloth Height 230Cm ( Top 30 Cm White Colour Net And 200Cm Light Blue Colour As Per Approval ) Stitching With Stifiner Tape, Pleats, Ironing And Laying In Icu Room Around Each Bed Using Pvc Runner With Hooks&Stopper For Hanging / Sliding Etc. As Per The Direction Of Engineer In Charge Including Conveyance To Site , Laying In Line And Level , Sealing All Cuttings In False Ceiling With Powder Coated Ms Cup , All Leads And Lifts Including All Labour Charges Etc. Complete. ( Unpleated Length Of The Cloth Maesurement Will Be Considered For Payment Also The Bottom And Top Foldings Will Not Be Considered In Cloth Measuremnet ) / Supplying And Fixing Powder Coated 20Mm Dia. Gi Round Tube Hanging Support Of Required Length ( App. Length 1.10M ) One End Fixing From Slab By Using 6Mm Dia. Expansion Bolt At A Distance Not More Than 2 M, C / C Down End Fixed To Powder Coated Aluminium Channel Frame 45X20mm X1mm Thick Section By Using Ss Screw As Per The Direction Of Engineer In Charge Including Conveyance To Site, Laying In Line And Level , Sealing All Gaps In False Ceiling Due To Hanging Supports , All Leads And Lifts, Including All Labour Charges Etc. Complete. , Od33560 / 2023_2024 Providing And Fixing Vertical Blinds As Per The Direction Of Engineer In Charge , Furniture& Other Works: Lead Lined Door Shutters: 2Mm Lead Lined Door Shutterswithsolid Cored ( 30Mm ) Lead ( 2Mm ) Lined Flush Door Side Hung Two Rebated Shutters With Plywood ( 6Mm ) & Laminated ( 1Mm ) On Both Sides And All Accessories ( Ss Hinges ( 4 Nos ) , Tower Bolt , Ss Handles Etc.. ) , Lead Lined Door Frames: Lead ( 2Mm ) Lined Flush Door Side Hung Single Shutter With Plywood ( 6Mm ) &Laminated ( 1Mm ) On Both Sides And All Accessories ( Lead Sheet Should Overlap Door Frame & Wall ) Includingproviding Wood Work In Frames Of Doors And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length , Using Good Quality Anjili Wood / Jack Wood ( Frame Size 12 Cm X 8 Cm ) , Wood Frame For Fixing Lead Glass ( Lead Sheet Should Overlap Door Frame & Wall ) , Steel Cupboard ( Godrej ) For Storage 6Ft Tall 3 Feet Width , Cupboardfor Storage Of Catheters , 6Ft Tall 3 Feet Width.19 Mm Ply Board Construction Laminate Finishpainted ( Enamel ) As Per Approval. Front Panels To Have A Locking Arrangements With One Panel Having Tower Bolt On The Inner Sidewith Handles , Magnetic Hinges Andall Complete , Providing, Fixing And Installation Of Floor Mounted 2 Bay Scrub Station Made Of Ss 304 1.6Mm Thk. Sheet Withtimeout Facilities, Foot Operated With Hot And Cold Water Mixture Complete With All Fittings Etc. Satin Finish And Most Optimal Ra Value. Elbow Operated Water And Hand Scrub. Curved Joints To Avoid Microbial Deposition And Growth, Ensuring Perfect Hygiene And Ease Of Cleaning. The Station Shall Be Equipped With Soap Dispensers. Easily Openable For Refilling The Hand Scrub / Routine Maintenance. Two Bay 63”X29”44” , Catheter Hanger And Wall Clamp Ss304 For 5 Aprons Including All Materials And Fittings , Lead Apron Hanger. Completely Made Of Ss304. Provision To Hang 10 Aprons. The Hanger Should Be 2Ft Width. Shoould Have Strong Base For Stability. The Width Of The Total Assembly Shall Be 3.5Ft Width And 2 Ft Depth. The Height Shall Be 153 Ft. , Providing And Fixing 2.0Mm Th. Vinyl Floor With Rubber Based Adhesive Over Clean And Smooth Surface Including Finishing By Rolling A Light Roller All Complete. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Wiring For Group Controlled ( Looped ) Light Point / Fan Point / Exhaust Fan Point / Call Bell Point ( Without Independent Switch Etc. ) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B , Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. Group C , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2X 2.5 Sq. Mm + 1 X 2.5Sq. Mm Earth Wire , Wiring For Circuit / Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.4 X 6 Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 3 X 1.5 Sq.Mm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.3 X 2.5Sq. Mmm , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 3 X 4 Sq. Mmm , Supplying And Drawing Following Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor, Unarmored Telephone Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.2 Pairs , Supplying And Drawing Co-Axial Tv Cable Rg-6 Grade, 0.7 Mm Solid Copper Conductor Pe Insulated, Shielded With Fine Tinned Copper Braid And Protected With Pvc Sheath In The Existing Surface / Recessed Steel / Pvc Conduit As Required. , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25Mm , Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required1 Run Of Cable , Cat 6 Rj 45 Computer Jack Modular Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5 / 6 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 2 Way 5 / 6 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15 / 16 Amp Switch , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5 / 6 Amp Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15 / 16 Amp Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Telephone Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Tv Antenna Socket Outlet , Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 1 Or 2 Module ( 75Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 3 Module ( 100Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 6 Module ( 200Mmx75mm ) , Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required. 8 Module ( 125Mmx125mm ) , Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. , Extra For Fixing The Louvers / Shutters Complete With Frame For An Exhaust Fan Of All Sizes , Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Color Washing Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage Connection Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep , Supply Of 300 / 305 Mm Sweep Light Duty Exhaust Fan In Metal Frame Working On230 Va / C , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required4 Way ( 8+12 ) - Three Phase Double Cover ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required6 Way ( 8+18 ) - Three Phase Double Cover ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 4 Way ( 8+12 ) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp / Tp Mcb As Outgoing ( Ip 42 / 43 ) , Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall, Making Good The Damages, Color Washing Etc. As Required 6 Way ( 8 + 18 ) - Double Cover Tpn Vertical Db With Provision For Fixing Mccb As Incomer And Sp / Tp Mcb As Outgoing ( Ip 42 / 43 ) , Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface / Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 2+12 Way, Double Door , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Double Pole, ( Single Phase And Neutral ) , 240 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps , Supplying And Fixing Following Rating, Four Pole, ( Three Phaseand Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Dbcomplete With Connections, Testing And Commissioning Etc. Asrequired. 63 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, ( Three Phase And Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 A Rating, 4 Pole, 30 Ma Rccb , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 Amps , Supplying And Fixing 5 Amps To 32 Amps Rating, 240 / 415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole , Supplying And Fixing Following Rating, Three Pole, Mcb63 A Rating, 3 Pole, Mcb , Supplying And Fixing Following Rating, Three Pole, Mcb 40 A Rating, 3 Pole, Mcb , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required100 Amp, 30 Ka 4 Pole , Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb With Thermomagnetic Release And Terminal Spreaders In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required125amp, 36Ka , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Existing Panel Assembly As Required. 16A -100A, 35 / 36 Ka ( Ics=100%Icu ) , 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required. Above 35 Sq. Mm And Upto 95 Sq. Mm ( Clamped With 25X3mm Ms Flat Clamp ) , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 185 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Aluminum Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 240 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 25 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 50 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 4 Core 10 Sq Mm With Factory Made Clamp , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 16 Sq Mm With Factory Made Clamp , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required. 3.5 Core 95 Sq Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armored Copper Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages, Color Washing Etc. As Required.4 Core 70 Sq Mm , Supply & Laying Of One No. Pvc Insulated And Pvc Sheathed Armoured Aluminum Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.3.5 Core 70 Sq Mm , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.225Mm Width X 50Mm Depth X 1.6Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating Ms Cable Trays Bends With Perforation Not More Than 17.5%, , Joined With Connectors, Suspended From The Ceiling With Ms Suspenders Including Bolts & Nuts, Painting Suspenders Etcas Required 225 Mm Width X50 Mm Depth X 1.6 Mm Thickness , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 50 Sqmm , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 3 1 / 2X 70 Sq. Mm ( 38Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 95 Sq. Mm ( 45Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 185 Sq. Mm ( 57Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.3 1 / 2X 240 Sq. Mm ( 62Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 10 Sq. Mm ( 25Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required.4 X 16 Sq. Mm ( 28Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 25 Sq. Mm ( 28Mm ) , Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Required. 4 X 50 Sq. Mm ( 35Mm ) , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 16 Sq.M , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required.25 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required.10 Sqmm , Supplying Siemens / Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium / Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2 / 3 / 3½ / 4 Core Cable Of The Following Sizes As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 50 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required. 35 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.25 Sqmm , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.16 Sq.M , Supply Of Superior Quality Copper Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimping Etc. As Required.10 Sqmm , Supplying And Providing Earth Clamps For Siemens / Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required.25Sq - 95Sq Mm With 20 Mm Wide X 1.20 Mm Thick Clip , Supplying And Providing Earth Clamps For Siemens / Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Following Sizes Of Cables As Required. 4Sqmm-16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required2.65 Mm Copper Conductor ( 12 Swg ) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg ) , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required4.00 Mm Copper Conductor ( 8 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.2.65 Mm ( 12 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 3.15 Mm ( 10 Swg ) , Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required. 4.00 Mm ( 8 Swg ) , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal / Coke And Salt As Required. , Supply And Clamping The Following Size Of Strips On Surface Of Wall / Parapet / Existing Cable Tray Using Clamps Fabricated From 20 X 3 Mm Gi Flat Duly Painted Or Heavy Duty Gi Spacer Saddles Spacing Of Clamps Not Exceeding 1 M, Making Good The Damages, Color Washing Etc. As Required ( For Horizontal Run ) 25 X 3 Mm Copper Strip , Supplying, Threading, Laying And Jointing Of The Following Sizes Of B Class Gi Pipe With All Required Accessories In Ground In Trench As Protective Covering To Earth Leads40mm Dia , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Meter Below Ground As Strip Earth Electrode, Including Connection / Terminating With Nut, Bolt, Spring, Washer Etc. As Required. ( Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm ) , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required2.00 Mm Copper Conductor ( 14 Swg ) , Supply Conveyance, Installation, Testing And Commissioning The Light Fittings Of Following Types Made From Crca Sheet 0.5Mm Thickness With All Accessories And Lamps Directly On Wall And Giving Connections With 16 / 0.20 Mm 3 Core Pvc Insulated And Sheathed Round Copper Conductor Flex Wire Or Extending The Original Wiring And Giving Connections As Required 1200 Mm 1X20w Led Lamp With Box Type Fixture , Supply & Installation Of Light Fittings On Tw Round Block
Supply, Conveyance Installation Testing And Commissioning The Light Fittings Of Following Types Made Of Crca With 0.5Mm Thickness Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16 / 0.20Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.1200Mm 1X20w Led Lamp With Box Type Fixture , Recess Mounted Led Luminaire With Full Diffuser Type Upto 36 W ( Max ) , 2X2 Led, Cool White, 5700K, White Powder Coated Crca Housing, Wipro Crco10r038hp57gl1 Or Bajaj Bzrsql 36W Gzi Cw Or Equivalent , Frame For Fixing Recess Mounted Led 2X2 Ft Luminaire 608 Mm X 608 Mm , Recess Mounted Circular Led Retrofit Downlighter, 15W, Powder Coated White Finish, Bpslr 15W Wh Bajaj Or Equivalent , Supplying And Fixing Of 6 / 7 W Pin Type Led Bulb In The Existing Angle Batten Etc As Required ( Philips, Wipro Or Similar Superior Make ) , Sitc Of 400Mm Sweep Meduim Duty Wall Fans With Metallic Vanes ( Make: M / S Almonard / Crompton / Bajaj Or Equivalent ) , Abc Powder Type Fire Extinguisher With Nabl Approval, Fights Class A, B, C And Electrically Started Fires. , Fire Extinguisher Carbon Di-Oxide Type With Nabl Approval , Charges For Dismantling The Existing Electrical Installations Complete Making Good The Damages Of The Wall And Conveying The Dismantled Materials To Store Etc As Required. , Numbering Of Ceiling Fan / Exhaust Fan / Fluorescent Fittings As Required. , Copper Pipe With Superlon Insulation For Suction And Discharge , Pvc Drain Pipe With Proper Insulation , Weather Proof 3 Core Copper Wire For Indoor To Outdoor Connecting Cable ( Size As Per The Requirement Of Ac Manufacturer ) , Core Cutting Charges Including Making The Surface Finished With Plastering And Painting, Making Good And Finishing With Matching Surface After Housing Pipe Etc. , Supporting Stand For Fixing Outdoor Unit ( Powder Coated ) , 4 Kva Voltage Stabilizer Wall Mount Type With Time Delay, High& Low Voltage& Thermal Overload Protection, Input Voltage: 170-220V, Output Voltage : 200-240V, High Voltage Cut Off : 240V, Efficiency: >95%, Frequency : 50Hz, V Guard Vg 500 Or Equivalent , Supply, Conveyance Testing And Commissioning Of 2 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar / Lg ( Dual Inverter Type ) / Voltas / Mitsubishi Or Superior Superior Brands, Cooling Capacity 6000 Kw / Hr With Rotary / Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500 / 450, Led / Lcd Display , Supply, Conveyance Testing And Commissioning Of 1 Ton 5 Star Inverter Type, Split Ac Unit With Copper Tube Cooling Coils, 5 Star Rating Bluestar / Lg ( Dual Inverter Type ) / Voltas / Mitsubishi Or Superior Brands, Cooling Capacity 3000 Kw / Hr With Rotary / Scroll Type Compressors. With Microprocessor Controlled Code Less Remote, Cfm Above 500 / 450, Led / Lcd Display , Sitc Of 19 Mm Thick Nitrile Rubber For Under Deckinsulation , Charges For Cutting Holes Suitable For Accommodating The Supply Ducts Including Plastering, Color Washing Etc. As Required. , Outdoor Unit Stand With Ribbed Rubber Pads , Electrical Cabling Between Indoor And Outdoor Units, With Required Size Cables / Wires ( Havells / Rr Kabel / V-Guard Frls Wires ) , Supply, Installation, Testing And Commissioning Upvc Drain Pipe 6Kg / Sq.Cmof Suitable Dia Connecting The Drain Pan Of The Indoor Units To Nearest Drain Point, With 12Mm Thick Closed Cell Elastomeric Insulation As Per Specification , Motorized Volume Control Damper For Individual Operation Of Ductable Split Air Conditioners , Supply And Fixing Of Canvas Connection And Ribbed Rubber Pads As Vibration Isolators , Providing And Fixing Of Thermal Insulation Lining With 13Mm Thick Nitrile Rubber Closed Cell Type With Adhesive, On Supply Duct. , Providing And Fixing Of Acoustic Duct Lining With 10Mm Thick Nitrile Rubber Open Cell Type Inside The Ducts , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminum Continuous Grilles 150Mm High For Return Air As Per Spec , Supply, Installation, Testing And Commissioning Of Powder Coated Extruded Aluminimum Continuous Grilles 150 Mm High For Supply Air With Aluminum Damper As Per Spec , Supply, Installation, Testing And Commissioning Of Volume Control Duct Damper Made Of Extruded Aluminum For Ducts / Collars To Be Provided With Suitable Links, Lebers And Quadrants For Manual Control Of Volume Of Air Flow And For Proper Balancing Of The Air Distribution In The Main Duct Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc., As Per Specifications. , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges , Supports, Gi Rods , Anchor Bolts , Gi Nuts And Bolts, Pvc / Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof / Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 24G , Supply, Installation, Testing And Commissioning Of Gss Sheet Metal Ducting For Air Distribution Network From Indoor Unit As Per Ducting Specifications Complete With Angle Flanges , Supports, Gi Rods , Anchor Bolts , Gi Nuts And Bolts, Pvc / Rubber Gaskets Complete With All Fittings , Bends, Transformations, Vanes, Splitter Dampers, Inspection Doors, Plenums, Channels, Rods, Anchor Bolts, Etc To Roof / Truss As Per Is 655. The Job Includes Entire Air Distribution Network And Sizing Of Ducts Also. Thickness: 22G , Supply, Installation, Testing And Commissioning ( Sitc ) Of 11 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu / Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring ( Max 3M From Isolator ) And Control Cabling ( Indoor To Outdoor ) , Thermostat Wiring, High-Low Pressure Cut Out, Suitable For Three Phase 440V Supply Etc Complete As Required , Supply And Providing Copper Earth Bus In The Panel Board , Cardiac Catheter Wash Station : Completely Made Ofss 304 Gsatin Finish, All Curved Joints Should Be As Perhtm Standards To Ensureperfect Hygiene And Ease Of Cleaning, Provision Forconnecting The Catheter Using 3 Way Adapter, Provision To Connect Air ( High Pressure ) And Water Through Separate Discharge Pipe Lines To Clean The Catheter, Wall Mounted Type, Approximate Dimension 33”Lx 24”W X 57”H, Provisions To Connect And Clean At Least 6 Catheters Simultaneously. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalised, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Busbars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale. ( 0-200 ) A Class 1 With 90 Deg Defl. Scale Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp Digital Multifunction Meter To Read V, A.Hz, Pf, Kwh Surge Protection Device ( Type1+2 ) Incomer 400A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 200A Copper Tpn Busbar Chamber With Copper Busbar Out Goings 250A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 160A Fp Molded Case Circuit Breaker With Micro Processor Based Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 100 A Fp Mccb Isolator-2Nos 63 A Fp Mccb Isolator-2Nos The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification , Supply, Conveyance And Fixing The Following Types & Current Rated Control Gears & Switchgears Conforming To Is 13947 Suitable For 440 V, 50 Hz, Ac Supply In The Panel Assembly Made Out Of 1.6Mm Crca Powder Coated Sheet As Required. 320A / 400A, 50 / 55 Ka ( Ics=100%Icu ) , 4 Pole, Current Limiting Type Mccb With Microprocessor Based Release With Overload Setting Of 50 - 100% Having Adjustable Ol & Sc , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale. ( 0-200 ) A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp, Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh Incomer 250A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 250A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 200 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos. 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos. 63 A Fp Molded Case Circuit Breaker - 2 Nos.The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification , Suitable De- Humidifier Units : Extraction At Least 35 Litres / Day, Compresor : Rotary, Air Flow : At Least 220M3 / Hr, Reputed Brand, Input 230Vac , Charges For Obtaining Electrical Inspectorates Approval Including Scheme Apporval And Final Approval And Regularizing With Kseb , 24-Port Gigabit Manageable Smart Network Switch With 2 Sfps. Rack Mountable , Patch Panel - 24-Port Patch Panel With Cable Tray. Rack Mountable , 4U Rack- Wall Mountable Including 4X 6Amp Power Distribution Box , Supply Of Branded 1Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 2Mtr Patch Cords With Cat 6 Cable. , Supply Of Branded 3Mtr Patch Cords With Cat 6 Cable. , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switchgears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type 4A Sp Mcb ( 0-500 ) V Class 1 With 90 Deg Defl. Scale ( 0-200 ) A Class 1 With 90 Deg Defl. Scale, Voltmeter Selector Switch 200 / 5 A 5 Va Class .5S Cts On / Off Indication Lamp, Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh, Incomer 200A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos Out Goings 160 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos 125 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos 100 A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 2 Nos.The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specifications.Pn Busbar Chamber With Copper Busbar. ( Nottaken For Evaluation ) , Supply Of Lt Switch Board Cubicle Type, Made Out Of 2 Mm Thick Crca Sheet, Totally Enclosed, Ip42, Free Standing, Wall / Floor Mounting, Dust And Vermin Proof, Powder Coated, Indoor, Compartmentalized, Suitable For Operation On 3 Phase And Neutral , 415 V, 50Hz Ac System With Bus-Bars Extendable On Both Sides, Including All The Necessary Internal Wiring , Suitable Spreader Etc. The Panel Shall Be Fabricated From A Firm Having Cpri Certification With Test Certificates For Similar Panel ( Required For Short Circuit Rating, Temperature Rise And Ip Classification ) And With Following Switch Gears, Metering Instruments And Accessories Etc. Complete As Required As Per Drawing & Specification. Ryb Indicating Lamps Led Type Digital Multi-Function Meter To Read V, A.Hz, Pf, Kwh Incomer 160A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) -1 Nos 160A Copper Tpn Busbar Chamber With Copper Busbar. Out Goings 125A Fp Molded Case Circuit Breaker With Thermal Release With Ol And Sc Protection Neutral Link ( Ics =100%Icu= 25Ka ) - 1 Nos %Icu= 25Ka ) - 2 Nos 63A Fp Mccb - 3 Nos The Panel Shall Be Top Entry / Exit And Suitable For Termination Of Cable System As Per Sld And Technical Specification. ( Not Taken For Evaluation ) , Supply, Installation, Testing And Commissioning ( Sitc ) Of 8.75 Tr X 2 Nos Or Higher Capacity Air Cooled Ductable Split Air Conditioner With Ceiling Suspended Idu And All Standard Fittings, Idu Ss Drain Pan, As Per Specifications Complete With Suitable Capacity Drive Motor, Air Cooled Condenser With All Accessories, Hermetically Sealed Scroll Compressor, Electronic Microprocessor Pendant Controller With Digital Display, First Charge Refrigerant Gas, Vibration Isolator Pads, Structural Supports For Fixing Idu / Odu As Shown In The Drawing, Safety Devices Including Thermal Protector, Pressure Relief Valve , Over Load Relays Single Phase Preventer Etc, Power Wiring ( Max 3M From Isolator ) And Control Cabling ( Indoor To Outdoor ) , Thermostat Wiring, High-Low Pressure Cut Out, Suitable For Three Phase 440V Supply Etc Complete As Required ( Not Taken For Evaluation ) , The Scrub Station Shall Be Made Of High-Grade Stainless Steel 304 With Stain Polish Finish And Wired To The Current Iee Regulations & Bs 7971. The Scrub Stations Control System Shall Be Based On Advanced Microprocessor. The Scrub Station Shall Be Sensor-Activated 24Vac. The Scrub Station Shall Be Provided With User Selectable Time Out Control. The Supply Shall Not Be Interrupted In Case Of Power Failure Or Maintenance. The Station Shall Be Equipped With Thermostatic Mixing Valve To Controls The Temperature Of Hot / Cold Water Supply. The Washing Faucet Shall Be Made Of Chrome Plated Brass Hand. The Station Shall Be Equipped With Soap Dispensers. Two Bay 63”X24”31” ( Not Taken For Evaluation ) , Eto Sterlizer, Sealing Machine & Accessories ( Not Taken For Evaluation ) , Latest Dose Reduction / Image Quality Improvement Packageslike Autoright / Clarity / Optiq. ( Not Taken For Evaluation ) , Cathlab Machine As Per Specifications With 18 Inches Or 46Cms Diagnol Detector Except Monitors ( All Configuration As Per Sr No 13 Except Detector ) ( Not Taken For Evaluation ) , Iabp As Per The Specification ( Not Taken For Evaluation )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
48.
Housing Urban and Rular Development #10200585 Price Bid
Tender For Construction Of New Muthalvar Padaippagam At Bhakthavachalam Park, Chennai; 1 Civil Works 2 Dismantling removing the existing Reinforced Cement Concrete work etc., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 3 Dismantling removing the existing Brick work etc., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 4 Removing the existing ventilators,doors and windows including removal of frames ,hinges and fastenings arefully and stacking the same at site etc., complete. 5 Dismantling Floor finish and daddoing walls in cement mortar with mosaic tiles/glazed tiles/cuddapah slabs. 6 Carting away the surplus earth and debris to a lead of 5kgm.including Loading, unloading and dumping in the Corporation Land as directed during the execution. 7 Dismantling removing the existing closet, fitting, pipes, etc as per site., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 8 Civil Works 9 Providing and constructing cast in situ hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipments like piling rigs, temporary casing of appropriate length forsetting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method dulythrough all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap). 10 Boring or chiselling through any obstacles, boulders, weathered rock, etc. Upto founding level of piles for seating resting or socketting of files. The rate quoted shall include demobilising the site with all plants, equipment, piling rigs, necessary personnel brought for piling work, including removal and transportation of debrise away as directed, cleaning and reinstating site to original condition as acceptable by the Architect on completion of piling work. 11 450 mm Dia 12 Carrying out initial working pile load test on specified dia piles as specified in IS:291 1 (Part 4). Includes all plant, equipment, machinery. Instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete 13 Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. 14 Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 300 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. 15 Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive ofgiving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12to a depth of 8 in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., 16 Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation. 17 Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth. 18 Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over. 19 Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12 to a depth of 8 around the building before laying the plinth projection.This holes has to be be closed after the treatment. 20 Supplying and Filling withM-sand in floor and others sub structures for 150mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of river sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification. 21 Construction of Wet Mix Macadam 150mm compacted thickness in two layers by providing , laying , Paving , and compactingofaggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensorpavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work. 22 Providing and laying plain cement concrete 1 : 4 : 8 ratio of(1 cement , 4 sand and8 graded stone aggregate 40mm nominal size) in foundation and basement for 100mm thick including dewatering wherever necessary and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification. 23 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 24 For column footing plinth beam , pile cap staircase steps, piers raft beam raft slab etc., 25 For Plain surfaces such as RCC slab, Beam, Bed Block, waist slab, landing slab, lintel etc., 26 For square or rectangular column, boxing, sunshade etc., 27 Providing and Laying M 30 Standardised concrete Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by theEngineer-in-charge 28 Basement 29 GF 30 FF 31 Terrace 32 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 33 Brick work in cement mortar 1:6(one cement and four sand) using fly ash bricks of size 230mmx110mmx70mm for foundation and super structure as per detailed specifications and as directed by the departmental officers 34 Ground Floor 35 First Floor 36 Terrace 37 Brick partition walls of 11.50cm thickness using best quality Fly ashbricks of size 9 x 4-3/8 x 2-3/4(230x115x76) in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) 38 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc.. with cement Mortar 1:3 (1 of Cement : 3 ofP sand) according to the specification. The Rate including Cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 39 Plastering of 12 mm thick for Internal walls with cement mortar 1:4 (1 of cement : 4 of fine P.sand)according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 40 Plastering 12 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 4 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by theEngineer-in-charge. 41 Supply and painting oftwo coats of Plastic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge.(Internal surface) 42 Supplying and painting of2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 43 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete (M-0652) 44 Supplying and filling the sunken slabarea byBRICK-BATCOBA by adding CICO NO:1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- AcrylicPolymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc.Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 45 i) Includingapplying two coats not less than 2 mm thick of TAPECRETE- AcrylicPolymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 46 Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colourwith base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 47 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 48 Providing and laying factory-manufactured linoleum flooring in the form of Rolls in the size of 12192mm of length and 1981mm of wide with 2mm thickness which laying above in the vertified tiles using the adhesive the flooring shall be laid over a smooth, level subfloor using manufacturer-recommended adhesives, complete in all respectsRoll flooring shall be laid with butt joints; edges shall be cold-welded or heat-welded for seamless joints.Apply a coat of linoleum polish or sealant after laying (if uncoated variant is used). Proper rolling to remove air pockets and ensure bonding the rate is inclusive of all necessary material, labour, transportation etc asper standards. 49 Finshing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in cement Mortar 1:3 (one cement and threee sand ) 12mm thick mixed with water proofing compound conforming ti ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed withred oxide and water proofing compound including curing et,. complete complying with standard specification and as directed by the departmental officers 50 Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. 51 Supply and laying with best quality the following materials of Machine Polished granite slab not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge 52 Supplying and fixing plywood partition with Teakwood frames of75x50mm size and with 3mm thick commercial plywood fixedwith screws and nails including fixing in position with 4Nos of iron hold fasts 50x6x230mm size etc.,complete.(ISI STD) 53 Supply & fixing of Tamilnadu Logo & Symbols as per design & Elevation. 54 Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 55 Supplying and fixing UPVC windows of casement type Open from the profile the size of outer frame 60mm x58mm and shutter profileare reinforcement withGI/1mm125GSM and 100% Corrosion free,the profiles are multi Chambered sections with wall thick of 2mm. TheEPDM rubber covered with over all the edges of frame and shutter the shutter .will be provided with Espag multi power point locks and also it operates with Handle. The Corners and joint should bewelded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thk should be provided to the shutter and it should not allow leakege of water even at most ranging storms and should have key lockable action, security protective hinges , strong locking system and as per size for arresting noise and energyloss. The connecting mechanism between sash and windowshould be fixed to the wall with 100% packing with screws and silicon Packing all roundthe frames. The window should be got approved from the Executive Engineer before use on work. 56 Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work. 57 FRP Door Sutter with FRP Door Frames along with vision panel (as per drawing) made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers. 58 Supplying and fixing UPVC Louvered Ventilators of from the profile the size of outer frame 60mm x58mm and shutter profile size of 60mm x 78mm both profile are reinforcement withGI/1mm125GSM and 100% Corrosion free,the profiles are multi Chambered sections with wall thick of 2mm.The EPDM rubber covered with over all the edges of frame and shutter . The Corners and joint should bewelded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thk should be providedin the Louvers.The window should be fixed tothe wall with 100% packing with screws and silicon packing all round the frames.The Ventilator should be got approved from the Executive Engineer before useon work. 59 FALSE CEILING WITH GYPSUM PLAIN TILES (600x600)Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm(Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with 12mm Gypsum plain Tiles as per stansdards 60 Providing & fixing of Brick Cladding in elevation as per drawing. The rate is inclusive of all necessary material , labour, transportation etc complete as per standards. 61 Supplying and Fixing of aluminium Dye Cast Letters of approved size and colour treatment processis achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes aluminium Dye Cast Letters 6 Size. Tamil Stainless Steel Letters 25CM 62 Supplying and fixing M.S.Grill gate of required size in two shutters with necessary iron members, gun metal cups and wheels 75mm dia. with fittings locking arrangements,etc., complete,including painting a priming coat of approved primer,etc., complete (The design of gate furnished is subject to alteration during execution.) 63 Supplying and Painting the wall with Texture Finish Paint including thorough scraping, clean removal of dirt, Primer. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) 64 GYPBOARD DOUBLE SKIN PARTITIONProviding and fixing of Gypsum Dry wall Double skin partition of 75 mm thick using SAINT - GOBAIN GYPROC or Equivalent make and the partition shall be of one layers of tapered edge 12.5mm thk Gyp board screw fixed with dry wall screw of 25mm at 300mm c/c to either side of 48mm studs. GI steel sections to be placed at 610 mm c/c in 50mm floor and ceiling channel 0.55mm thick having equal flanges of 32mm made of GI steel with joints staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper and 2 coats of Drywall top Coat suitable for Gypsum upto primer level.As per India Gypsum Specs.Note: Angle Bead to be used at external angles to get straight line finish & protection from normal impacts. 65 Providing and laying water proofing treatment to vertical and surfaces for sunken portion of depressed portions of W.C., and the like consisting of :i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) 2nd course of 20mm cement plaster 1:2 (1 Cement : 2 Coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) 3rd course of applying blown or residual bitumen applied hot at 1.7Kg per sqm of area. iv) 4th course of 400 micron thick PVC Sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm) 66 PLUMBING WORKS 67 Supply,erection and testing & commisioning of 3HP Submersible pumpset in the capacity of 6000 LPH @ 300Ft, max. total head of 350 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge.( Sump to OHT transfer pump) 68 Labour charges for the erection of submersible pumpset in borewell/openwell including fixingand jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 69 Drilling of 6 dia vertical borewell so as to have a finished size of 6 dia borewell in boulder area to any required depth as decided by theincluding Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractors rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs. 70 300mm 71 Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by V notch method. 72 Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 73 200mm dia CS ( plain pipe) 74 150mm dia CS ( plain pipe) 75 Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. 76 200mm dia CS ( plain pipe) 77 150mm dia CS ( plain pipe) 78 Supply and fixing in position whiteEuropean Water Closet of approved make with low level concealed flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directedby the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.URINAL WITH FIXING ACCESSORIES SET, SIZE - URS-WHT- 13253N 79 Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia B Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass, wast couplingNipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers.(TheWash basin should be got approved by the Executive Engineer before use on works. 80 Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre longflexibletubeincludingcuttingandmakinggoodthe wallswherever requiredetc complete.complyingwithstandardspecificationandas directedbytheDepartmentofficers.Thequalityandmakeofhealth faucet should be got approvedby Concern department Engineer before use on work. 81 Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc.complete,complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work. 82 Supplying and fixing in position Mirror of size 600x450mm of approved quality and brand with necessary plastic back PVC frame with bottom stand using brass screws rawl plugs for fixing etc complete complying with standard specification and as directed by the Departmental officers.The colour of frame and quality of mirror should be got approved by the Executive Engineer before use on work 83 Supplying,installing,testing and commissioning of approved make CONCEALED STOP COCK for toilet including neccesary accessories etc,complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work. 84 Supplying and fixing CP angle cock with wall flange including cutting and making good the walls wherever required etc., complete complyingwithstandardspecificationandas directedbythe Engineer Incharge before use on work. 85 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg ,10 kg /sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). 86 160mm Dia 6kg 87 110mm Dia 6kg 88 75mm Dia 6kg 89 50mm dia 6kg 90 Supplying andfixingPVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge. 91 110mm dia 92 Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly limeconcrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) includingdismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ). 93 Constructing solid block masonry manhole various size of deep in cement mortar 1:3( 1 Cement: 4 coarse sand ) R.C.C. Raft & top slab with cement concrete 1:2:4, plain cement concrete 1:4:8 mixfor base course (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size )above that 150 mm thick RCC M25 raft slab inculding reinforcement 10mm dia 150mm c/c bothways. Plastering inside walls with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), finished with a floatingcoat of neat cement ,supplying and fixing SFRC manhole cover with farame , PVC foot rest as per detailed drawing etc the quoted rate shall also necessary excavation and back filling etc complete.complete as per standard design : (the chamber and cover should be got approved by the Executive Engineer before use on works) 94 Manhole 600 x 600 mm internal size ( Depth up to 1000mm) 95 Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesivesand fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works.Internal & Vertical 96 a) 20 mm dia 97 b) 25 mm dia 98 c) 32 mm dia 99 Supplying and fixing manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement,two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by theClient / Engineer-in-charge.Size:600x600mm 100 Supply & fixing of Bottle trap as per standards. BOTTLE TRAP (WITH INTERNAL PARTITION) 32 - ALD-CHR- 769L300X190 101 LANDSCAPING WORKS 102 Planting of Ixora hybrid foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inchincluding loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 103 Planting of Ficus black ornamentalfoliage shrub varietyof height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 104 Planting of Jasmine Plant foliage shrub varietyof height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 105 Planting of Travellers palm ornamental foliage Specimen plantvarietyof height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 106 FURNITURE WORKS 107 Linear type Workstation (1000mm(W) X 600mm(D) X 750+300mm(H)) as per below specificationTable Top: - Made of 25mm Thick E1 Grade Pre-Laminated Particle Board with 2mm PVC Edge Banding.Main Screen : -8mm Sandwitch Glass finishes of Sizes 1050x300mm htUnderstructure: - MS Square Leg cross-section of size 50 x 50mm is Made of Mild Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50*25mm. Rectangular Tube made of 1.6mm thick CRCA Powder coated.Raceways : -Vertical Raceways - 120 MM HT MS Powder Raceways Considered below the Table top With Intermediated legs considered for Wire Provision.Without Middle Cover.Wire Manager: - Wire Manager Hole considered. 108 Storage (Open Shelf) 1200mm 300mm 2100mmIs made 25mm top & all other panel 17 mm thick in prelam particle board finished in Laminate of approved shape, equal shutter 2mm thick edge banding finished. This also includes providing and fixing of hardware like locks, handles, spring loaded hinges etc 109 Supply of Chairs 110 ASPIRE MB (BLACK)* Black Backrest frame, Polished aluminum connected* Mesh back, Seat and headrest fabric* Height adjustable lumbar support with PU surface* Tiltable backrest (can be tiltable when locked inupright position)* 4D adjustable armrest with PU pads* Mould foam with plastic seat upholstery* Mechanism, with seat slide.* Chrome gaslift* Polished aluminum base with plastic cover,* 60mm nylon castors 111 * Versa Medium Back Mesh Chair* AN -70 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Armrests ( Height)* Nylon Base* Fabric Upholstered Cushion Seat 112 Meeting Room TableTable Top: -Made of 25mm Thick E1 Grade Pre-Laminated Particle Board with PVC Edge Banding,Understructure: - MS Leg 50mm 50mm is Made of Mild Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50*25mm.Raceways : Horizontal RacewaysMS Powder Raceways Considered below the Table top With Intermediated legs considered for Wire Provision.Wire Manager:- Flip Cover Considered. 113 Meeting Room Table (2400mm 800mm 750mm) 114 Cabin Main Table with Side Storage (Main Table 1500mm 750mm 750mm / Side Storage 1200mm 450mm 750mm)Side Storage 1200mm 450mm 750mmTable Top: Main and Side Table Made of 25mm Thick E1 Grade Single Top PLPB with 2mm PVC Edge Banding,Understructure: MS Square 50mm Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50mm x 25mm.Flip Cover : Flip Cover 400*143mm Made of AluminiumWire Manager: Wire Box with Socket Plate and Vertebra considered for wiringModesty : Front & Side PLPB Modesty Panel . 115 Librarian TableMain Table 1100mm 440mm 750mm 116 3 Seater Sofa with Table 117 INTERACTS-902 (Leatherette)3 SeaterSize : 1810 (W) x 720 (D) X 740 (H)Made off : the sofa is made of fine quality leatherrite (3s = 8.0 mtr,2s = 6.8 mtr, 1s= 5.3 mtr), the structure is made from silver wood& pine wood, 32 & 40 density foam is used which is covered withroll poly filling for giving comfort and extra softness to sofa. Extra(kangaro company)Legs : are made of stainless steel.Color : Black 118 ELECTRICAL 119 TNEB METER BOX 120 Supply andfixng of TNEB meter board suitable for 3phase100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size1-1/2x1-1/2x1/4rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.100A fuse units (500V), 1No .neutral link,copper earth flat of size1x1/4with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete. 121 M.S. Enclosure (IP65): Supply, Erection , Testing and commissioning of the followingtype M.S. powder coated enclosure for housing the Meteringing service, whch should be made outof16SWG enclosure with provision for cable entry, with Outdoorapplication IP65 as specified Protection, fixed on the wall/Floor withall accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth etc. 122 MAIN Panels 123 MAIN Panels:Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of14 SWG CRCA sheet steel with powder coated finishing, MS base frame, double internal earthing arrangements, 100Amps, rating TPN Copper busbars and Earth bar with interconnection busbar, etc., comprising of the followings:EB Incomer :1 No. 100Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMDG Incomer: 1 No. 100Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMCommon C/O Incomer: 1 No. 100Amps, 4Pole Automatic Changeover Switch with EB ON and DG ON LED Indication lampsMetering : 2 Set of RYB LED Indication lamps2 Nos. of Multifunction Meter with RS 4852 Set of Current Tranformers (200/5A, Cl-1), 1 No. 200/5A CT for APFCR2 Set of Control MCB and Electrical Interlocking between EB & DG Incomers Outgoings: 3 Nos. 63A, 25kA, TP+N, TM MCCB with Ext. RHOM (APFCR &AC)4Nos. 32A, 25kA, TP+N, TM MCCB with Ext. RHOM (Lighting & Spare),6Nos 32A DB MCB inclding all labour Charges And Transports Charges. 124 APFC PANEL: Supply, installation, testing and commissioning of 25 KVAR Automatic power factor correction panel ( APFC ) with 8 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel,enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 8 stage Digital Automatic power factor correction,( APFC ), Auto / Manual selector switch, cluster LED typeindicators, in the incomer,complete with electrolytic grade aluminium bus bars, MPP type Power capacitors, with 5 KVAR x 3 no. 3 KVAR x 2 nos. 2 KVAR x 1 nos. 1 KVAR x 2no. Contactors, MCCB’s, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting,Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, Main panel sensing CT interconnecting wiring etc., all inclusive. 125 Supply, Installation, testing and commissioning of 1 x 58.5KVA, Silent type Diesel Generator Set with AMF Panel complete with suitable size Acoustic enclosure CPCB IV and BIS. Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours operation generally confirms to BS:5514, directly coupled to 58.5KVA at 0.8 Power factor, 415V, 3Phase , 4wires, 50cycles per second self excited, self regulated, with brushless excitation, Alternator generally confirms to BS:5000/IS:4722. DG set shall be complete with radiator, residential type silencer, electronic governor, cable termination box, MS mounting frame, fuel piping, diesel day tank, 24VDC Battery, Battery mounting frame, oil level indicator with gauge board, andall other accessories as per standard specifications.Diesel Generator set shall be mounted on cushy foot or similar type of vibration Isolators. The cost of Exhaust pipe shall be included in this item with Sutable concrete Base at M30 Grade. The DG Set shall be suitable for auto-mains failure startand auto / manualoperations.The DG Should be supplied with Auto-Start-Stop Control panel with suitable rating switchgear 126 DISTRIBUTION BOARDS 127 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCBswitch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wallwith earth connection only.Higher End 128 Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution boardwith double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB asoutgoing in flush with wall with earth connection only. Higher End 129 Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm.with the following in flush with wall with earth connection only. i. 63A 4P MCB - 1 no.ii. 63A 4P 30MA RCCB/ELCB - 1 no.iii. 63A DP MCB Isolator -3 nos.iv. 6A to 32A SP MCB - 12 nos., 130 Supply and Laying of 3 1/2x 70 sq.mm. PVC armoured LTUG cablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 131 Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection. 132 Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. 133 Run of Mains 134 Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 135 Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. 136 Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 137 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. 138 Point Wiring 139 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) Higher End Primary Point. 140 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)Higher EndSecondary Point. 141 Switch & Sockets 142 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 143 Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 144 Supply and fixing of 1 no.6/16A two modulesocket , 1 no.16A one module switch with module cover plate (plastic) on Suitable module concealedBox (GI ) in flush with wall with connections. Higher End 145 Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) 146 Air Condition 147 Supply & Instalation of Air-Conditioner with Copper Coil 2.0 TR Split Type AC Unit - 5 Star Rated, 5 KVA capacity Automatic Voltage Stabilizer with time delay relay, 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit), Inculding MS stand for fixing outdoor unit. 148 Supply and fixing of Copper Refrigerant Piping of 3/8 dia and 5/8with Pipeline nitrle rubber insulation with 50mm PVC water drain pipe line with Non Adhesive Cotton Roll insulation and 3 core Power cable from indoor to Outdoor unit. 149 Supply and fixing of 450mm (18) Wall mounting 5 star rated complete (Higher end) with necessary accessories and hardwares as required. 150 Supply and fixing of 300mm (12) sweep(Heavy Duty) AC exhaust fan complete with necessary wall opening and making good of the wall . 151 Supply and fixing of louvers shutters arrangements for 300mm (12) sweep AC exhaust fan 152 Supply and fixing of 24W LED 2x2 square type Recessedfitting with LED (Higher end) on false Ceiling with suitable hanging support from ceilingwith PVC unsheathed copper leads from terminals to the fitting 153 Supply and fixing of 18W LEDRound type Recessedfitting with LED (Higher end) on false Ceiling from ceilingwith PVC unsheathed copper leads from terminals to the fitting. 154 Supply, installation, testing and commissioning of36 W, 900mm diaCircular LED pendantlight fitting, made out of CRCA powder coated body, aluminium reflectors,poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. KL 3232 155 Supply and fixing of28Watts GATE FIXTURE FITTINGwith cool day light suitable for wall / roof sheet mounting, made outCRCA powder coated body,IP65 aluminium reflectors,poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.(Klite/Millenium/Bajaj Equivalent) 156 Supply and fixing of 8W Light fitting (IP67) Inground fixture with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Klite/Millenium/Bajaj Equivalent) 157 Supply and fixing of MIRROR Light 20W LED Batten 158 Supply and erection of Canon Digital Photocopier (Xerox) Machine IR-3300 / 3235Type of Product : Laser Multi functionalCore Functions: Print, Copy, Scan & SendFirst Copy Time:3.9 SecMultiple Copies :1 to 999 SheetsPrint Speed :45ppmThe laser beams engrave the image or text that you have sent to print on the surface of the drum. When using a copier this process is done using light, the light scans the page required for printing and converts it into an image 159 Supply and erection ofAll-in-one Desktop of HP 27-cb1456in Core i5 (8GB DDR4 /Windows 11 Home/27 Inch Screen/27-cb1456in) with 600VA UPS, Keyboard, Mouse,27 inches, 11th Gen Intel Core i5-1235U6 x 1.8 GHz (Turbo Speed upto 4.2 GHz) Cores Hexa Core, 12 Threads, 18 MB Cache, UHD Graphics 730 Graphics, 8 GB DDR4 RAM Smallest and 512 GB SSD.Ethernet (LAN), HDMI, Multi Card Reader,WiFi, Bluetooth v5.03 x USB 3.0, 1 x USB Type-C and Inbuilt Microphone 160 PRINTER: Supply, installation, testing and commissioning of HP Smart Tank 790 WiFi All-in-One Printer Duplexer with ADF and Magic Touch Panel Inkjet Colour printer, print speed 11-20 sheets with multiple features like print, scan, copy, fax, multi-port connectivity (Hi-speed USB 2.0, Wifi, Bluetooth LE , 1 USB Host, LAN) , 2.4/5G dual band Wi-Fi, Wi-Fi Direct, mobile printing capability, etc 161 Supply, installation, testing and commissioning of Long Range Wifi Device of following Specification: Networking Interface: (1) GbE RJ45 PortPower Method: PoE+, Pasive poE(48V) Max TX power: 2.4 GHzAntenna gain: 2.4 GHzMounting: Wall or Ceiling MountingWifi Satndards : 802.11a/b/gWireless security: WPA-PSK, WPA- Enterprises(WPA/WPA2/WPA3)VLAN: 802.1Q Concurrent Clients: 300+ 162 CCTV 163 Supply, Installation, Testing and commissioning of 16 channel 2 SATA NVR, with 6TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected,Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony. 164 Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand and camera fixed connecting box. (Make: Dahua/Panasonic) 165 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN (Make: Sony/ LG /Samsung). 166 Supply and Clamping of CAT 6 unarmoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. ii)Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 167 Supply and Fixing of Rack with Accessories -Higher end9U Rack with fan extra for the above rack. (Amp/NVR/POE) 168 Supply and Fixing of Rack with Accessories -Higher end4U Rack with fan extra for the above rack. (speaker/data/cctv) 169 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 170 Supply and fixing of POE 8 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 171 Supply and fixing of outdoor4X6PVC box with 102mm x 77mm x 102mm with all fixing accessories. 172 Supply, Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges. 173 Supply and Installation for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up and battery stand . 174 Supply, Erection of 6mLengthpole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. 175 VOICE & DATA 176 Supply, Fixing and Termination ofRJ 11 Single Point ( Point to Point) Crimping, Testing and arrangement charges. 177 Supply & Installation of CAT 6 PVC Module Box I/o socket & face plate single socket Erection and arrangement chargers (Higher end) 178 Supply and fixingofLAN Network Switches Un-Managed 10/100/1000 - 24 Port and 24 Port Patch Panel- Unloaded erection and arrangement chargers. 179 Supply, runing, testing and commissioning of2 Pair Unarmoured 0.5mm Telephone cable in suitable Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 180 PA SYSTEM 181 Supply, Installation,Testing & commisioning of 15W Wall Speaker 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:AhujaAMH402T/Bosch or its equivalent) 182 Supply, Installation,Testing & commisioning of 120 watts P.A Mixer Amplifier with the output power of 120 watts maximum 160watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 wattsRMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000/Bosch) 183 Supply, runing, testing and commissioning of2Core x 1.5sq sqmm PVC insulated un Armoured Speaker Cable in suitable 20mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 184 Earthing 185 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm withcopperearthplateofsize125mmx50mmx6mmwithnecessaryfunnellingarrangementswithnecessary masonry work and with 38mm RCC cover slab for the brick masonry 186 Supply and erection of 17.2mm, 3mtr long, Copper Bonded earth rod with backfill compound, including civil worksof base PCC for chamber andheavy duty Chambercover,, heavy duty chamber cover, etc., as per IS 3043 standards 187 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection 188 Supply and Run of1 of No.8 SWG copper wire for earth connection 189 Supply and Run of1 of No.8 SWG copper wire in suitable PVC rigid pipeon wall / floor / ground for earth connection 190 Supply of 2mx1mRubberMatsuitablefor11KVinstallation confirming to IS(5 Nos) 191 Supply of First Aid Box complete with all First Aid Medicines 192 Supply and fixing of Shock Treatment chart with Glass frame 193 Supply and fixing of4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle 194 Supply and fixing of Fire Extinguishers Co2, 4.5Kg confirming to TAC norms 195 Supply and fixing of Metallic Danger Board as required by the Electrical Authorities 196 METAL SIGNAGE BOARDS: Supply and fixing of metal signages for the following:1. Mudhalvar Padaipagam text in Tamil of size 20 x 15with backlit LED placed over the base, fabricated using stainless steel sheet of minimum 16G thickness brush finish of required size and colour as required. 197 LOGO SIGNAGE BOARD 198 LOGO SIGNAGE BOARDS: Supply and fixing of acrylic signages for the following:1. Mudhalvar Padaipagam logo of size 2 x 22. CMDA logo of size 2 x 33. Directorate of Public Libraries logo of size 3 diawith backlit LED placed over the sun board base, SIDE EDGES(4): 5mm transparent white acrylic sheet with laser cut & 4inches manual raising all around with details. ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS:Front: a. 5mm Imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine.b. Flexi bond make 25mm Sun board for the back of the logo.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
49.
Public Administrative Department #10194948 Price Bid
Tender For Supply Installation Testing Commissioning Of 40 Hp ( 02Nos. ) Electric Pump Sets With All Allied Equipment And Accessories At Newly Buildup Pump House In Seelampur Under Snz In Mcd. - Supply Installation Testing And Commissioning Of 40 Hp Electric Pump Set Horizontal End Suction Pumps With Non-Clog Impeller Having Delivery Upwards To Handle Storm / Sewage Water. The Pumps Should Be In Standard Construction Having Ss Impeller , Stainless Steel Shaft And Casing Design Of Pump Should Be Such That The Pump Losses Are Minimum, Economical In Cost And Easy To Maintain. All Rotating Parts Shall Be Statically And Dynamically Balanced To Ensure Vibration Less Operations After Erection. The Pump Should Be Coupled With Suitable Horizontal Tefc Electric Squirrel Cage Induction Motor Mounted On Common M.S Base Frame / Plate Through A Pair Of Flexible Coupling M.S Guards Etc. The 40 Hp Motor Hall Be Horizontal In Design, Foot Mounted Construction For Operation On 3 Phase, 415 Volts 10% 50 C / S , A.C Supply Having Continuous Rating And F Class Of Insulation Discharge =440 M³ / Hour Head =15 Mtr Rpm = 1450 Hp Of Motor =40Hp 2 Supply And Fixing Of B-Series Anti Vibrating Spring Foot Mounting Pad For 40 H P Pump Set. 3 Supply Anf Fixing Of 300 Mm Dia For Header Line ( 9.5 Mm Thick ) M.S Black Pipe Heavy Duty Conforming To Is:1239 Part-1 ( 1990 ) 4 Supply And Fixing Of 300 Mm Dia ( 25 Mm Thickness ) M.S Flange With Required Nut Bolts And Packing Sheet Etc Complete As Required. 5 Supply And Fixing Of 300 Mm Dia ( 8 Mm Thick ) , Length 0.75 Mtr M.S Bend . 6 Supply And Fixingof 300 Mm Dia ( 25 Mm Thickness ) M.S Blankflange 7 Supply And Fixing Of Of 150 Mm Dia M.S Black Pipe Heavy Duty ( C-Class ) Conforming To Is:1239 Part-1 ( 1990 ) 8 Supply And Fixing Of 150 Mm Dia Non Rising Spindle Sluice Valve Of Ci Body With Wedge, Bronze Ring Confirming To Is 14846 & Ss Is: 6603 ( Isi Marked ) , Pn 1.6 Ci 9 Supply And Fixing Of150 Mm Dia Swing Type Non Return Valve Of Ci Body With Door, Bronze To Rubber Rings Confirming Tois5312 10 Supply And Fixing Of 150 Mm Dia ( 12 Mm Thickness ) M.S Flange With Required Nut Bolts And Packing Sheet Etc Complete As Required. 11 Supply And Fixing Of 150 Mm Dia ( 8 Mm Thick ) , Length 0.5 Mtr M.S Bend . 12 Supplyof Corrugated & Chequered Rubber Mat Having Thickness 25 Mm And Size In 1M X 2M. 13 Sitc Of Pillar Box Size900mmx 450 Mmx 250 Mm Suitable For Mounting Incomer Of 250 A Mccb / Main Switch 4 Pole And Energy Meter 3 Phase Complete With Eleethoypic Grade Aluminium Bus Bar Of Size 25Mmx19mm Mounted On Galvanized Ms Body Power Coated Pilferage Proof Smc Door Duly Welded With Ss With Rain Com Size 40 Mmx 40 Mmx 5 Mm X600mm Height In Cutting 300 Mm Height Below Grand And Covered With Shade Proof Smc Sheet Of 3 Mm As Required. 14 Sitc Of 50 Hp Fully Automatic Star Delta Motor Starter In Sheet Steel Enclosure Type Mn With Spp Feature I / C Connection Etc. Complete As Required. 15 Sitc Of 4 Pole 320 Amp Off Load Side Handle Change Over Switch Conforming To Is: 13947 ( Part I & Iii ) In Sheet Steel Enclosure I / C Connection Etc. Complete As Required. 16 Supplying, Installing, Testing And Commissioning Of Following Capacity Tpn Tap Off Box Made Of 1.6Mm Thick Sheet Steel Enclosure Duly Painted With Powder Coating On Existing Rising Mains Complete With Tpn Disconnector Fsu And Hrc Fuses, Connections, Earthing Etc. As Required ( A ) 200 Amp 17 315Amp 18 Supply Of 70 Sq Mm X3.5 Core Xple / Pvc Insulated & Pvc Sheathed ( Heavy Duty ) Armoured Alluminium Conductor Power Cable For Working Voltage 1.1 Kv Confirming Is7098 / 1554 ( Part-I ) As Reqd 19 Supply Of 95 Sq Mm X3.5 Core Xple / Pvc Insulated & Pvc Sheathed ( Heavy Duty ) Armoured Aluminium Conductor Power Cable For Working Voltage 1.1 Kv Confirming Is7098 / 1554 ( Part-I ) As Reqd 20 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required 100 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 21 225 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 22 Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays Tee With Perforation Not More Than 17.5%, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required100 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 23 225 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 24 Supplying And Making End Termination With Brass Compression Glandandaluminiumlugsforfollowing Sizeofpvcinsulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required3.5X70 Sqmm ( 38Mm ) 25 3.5 X 95 Sq. Mm ( 45Mm ) 26 Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nomical Size ) In Foundation Of Pump Set Including Form Work Etc As Reqd. 27 Earthling With G.I Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc ( W / O Charcoal / Coke And Salt ) As Reqd. 28 Providing And Fixing 25 Mm X5 Mm G I Stripstrip At 0.50 Meter Below Ground As Strip Earth Electrode Including Connection / Termination With Nut Bolt Spring Washer Etc As Reqd. ( Jointingshall Be Done By Overlaping And With 2 Sets Of Brass Nut Bolt And Spring Washer Spaced At 50 Mm ) 29 Sitc Of The New Vacuum Pump Of 5 Hpmodelwith Indus 3 Phase Motor Or Equivalent Vacuum Pump Of Size 40X40 Mm With Standard Fitting As Per Manufacturer Size 40 Mm G I Pipe With All Fittings Nipple Elbo Union Gate Valve 40Mm Size For Each Pump For Chargingcapable Of Priming Of Main Pump Set And Evacuation Of Air From Suction Pipe And Chamber. 30 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, With Piano Type Switch, Phenolic Laminated Sheet, Suitable Size Ms Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 31 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 32 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 33 Supplying And Fixing Metal Box Of 150 Mm X 75 Mm X60 Mm Deep ( Nominal Size ) On Surface Or In Recesswith Suitable Size Of Phenolic Laminated Sheet Coverin Front Including Providing And Fixing 3 Pin 5 / 6 Asocket Outlet And 5 / 6 A Piano Type Switch, Connections, Painting Etc. As Required. 34 Supplying And Fixing Metal Box Of 180 Mm X 100 Mm X 60 Mm Deep ( Nominal Size ) On Surface Or In Recess With Suitable Size Of Phenolic Laminated Sheet Cover In Front Including Providing And Fixing 6 Pin 5 / 6 A & 15 / 16 A Socket Outlet And 15 / 16 A Piano Type Switch, Connections, Painting Etc. As Required 35 Supplying And Fixing Following Way, Single Pole Andneutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Busbar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthingetc. As Required. ( But Without Mcb / Rccb / Isolator ) 8 Way, Double Door 36 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitablefor Inductive Load Of Following Poles In The Existingmcb Db Complete With Connesingle Pole 37 Double Pole 38 Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable For Working Voltage Upto 1.1Kv Confirming To Is-7098 Of Following Sizes: 2 X 10 Sq.Mm 39 Sitc Of 100 W Led Flood Light Luminiare Fitted With Lens, Madeof Pressure Die Cast Aluminum Housing & Toughened Glass Cover Complete With The Following Specification As Reqd. ( A ) Total System Wattage = 90Watt+ / -5% ( D ) Luminaire Efficacy>=100 Lm / W ( E ) Power Factor>=.95 ( F ) Protection Class-Ip-66 40 P / Fhot Press Sheet Mouldedcompound ( Smc ) Fire Retardant ( Temp. Resistance Up To 200 C ) , Ip 55 Weather Proof Polebox Of Innerdimension 2000X160x98mm ( Ns ) Complete With Suitable Arrangment For Fixing Of1nosof 6 To 32 Amp Single Pole Mcb & 63 Amp. Doublepole Isolator ( Mcb / Isolator Excluded ) Withneutral Link Duly Shorting On Din Channel With2 Nos Of Ms Clamps With Ss Back Plateofsuitable Size With Danger Monogram Property Printed On The Coveretc Asreqd. ( Without Mcb ) 41 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan Withbrush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos.Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value ( Cmm / W ) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm ( Tolerance As Per Is : 374-2019 ) , Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C ( Max. ) , Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc.Complete As Required. 42 Sitc Of Surface Mounting Led Luminaire Suitable For 1X20 Watt Led Rating Box Type Complete With Extruded Aluminium Batten Prewired With High Efficient Leds With The Following: A ) Total System Wattage 20 ±5% Wattb ) Luminaries Effucacy = 100 Lumens / Watt C ) Power Factor = 0.95 43 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And For Making Ms Mesh At Sumpwell And Bar Screen 44 Supply Of Heat Resistant Flameretardant Pvc Insulated Industrial Grade Copper Conductor ( Unsheathed ) Flexible Cables Of 35 Sqmm Single Core 45 Supply Of250 Mm ( 10 Inch ) Sweep 1250 Rpm Exhaust Fan Fresh Air Type Complete With Shutters Blades Etc As Reqd 46 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep 47 Laying And Fixing Of One Number Pvc Insulated And Pvcsheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Sizeon Wall Surface As Required. Hume / Metal Pipe 48 Above 35 Sq. Mm And Upto 95 Sq. Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Delhi View Result →
50.
Housing Urban and Rular Development #10185295 Price Bid
Tender For Providing Water Automation System Including Upgradation Of Existing Pump House At Roshanara Bagh.- 1 Providing & fixing of wireless RF ultrasonic sensor to water level in each water storage tank of the system etc. as required. 2 Supply & installation of Scada software for on line Monitoring pump house for all the locations of site with following specification:-Real time Recipient should be added or delete manually according to the need as per the requirement.Real time activity in pump house should be stored in a queue. Online Monitoring application should be with in System for tracking. Online activity storage should be at central server for proper backup and support. Gateway server will manage all the incoming and out going through real time.Gateway client application can be installed at any number of mobile. Fault or any breakdown reported immediately to concerned person through mobile messaging (persons can be any number).Each operations log stored in server & can be checked later on. Software can be breakup in to different level for checking whole pump house according to the client needs.Report can be checked according to the predefined level. 3 Supplying, installation, testing and commissioning of Centrifugal Storm / Sewage Pump having single stage, suction 300 mm dia, delivery 350 mm dia, discharge minimum 1200 cum/hr at minimum head 9.5 mtr, semi open mixed flow pump, C.I impellers and housing, shaft-S.S-410 having solid handling capacity minimum 100 mm dia gland packed stuffing box complete with not less than 75 HP TEFC 415 V 50 HZ squirrel cage induction horizontal electric motor (F class insulation) coupled on a fabricated M.S. base frame through a set of flexible couplings with Anti Vibration Pad i/c credit of old dismantle etc. complete as required. 4 Supplying, fixing, testing & commissioning of double flanged Sluice Valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required with credit of old dismantle material etc. complete as required. 5 150 mm dia
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Delhi View Result →
TenderDetail
Loading tenders