Search all local Tender for Abrasive Papers. Download Abrasive Papers Tender Documents. Till date 5 Abrasive Papers tenders are published by various Tendering Authorities & Private companies. 5 live Tender Notices for Abrasive Papers are available in Abrasive Papers Tender section. Filter tenders to view Abrasive Papers Tenders in Maharashtra, Gujarat, Delhi etc.
tender for bidding type normal tenderitem list :- (1) water proof silicon carbide abrasive paper sheet, nominal size- 280 x 230 mm grit no.150 conforming to is: 715-2002(fourth revision) with amendment no.1 of october '2004," amm (els)bl gujarat 3323.00 numbers
supply and installation of double disc grinding / lapping machine and consumable for lapping machine- magnetic fixation system ,silicon carbide abrasive paper disc. - 8" (self adhesive) ,polishing cloths 8" ( psa backed ) ,aerosol spray for diamond paste ,polishing suspensions lavigated alumina – regular .
tender for mandatory testing of cylinder - testing and painting of 14.2 kg cylinder:scope of job: job to be carried out at desired location of plant premises as per instructions of eic and as per attached specification. scope includes supplying of paint, thinner, primer and other consumables like teflon tape, screens brush, etc and neccessory tools and tackles and manpower etc., equipment to be used for hydro testing, spray painting of cylinder, pneumatic testing are provided in the plant by the hpcl.surface preparation: the existing painting to be removed by means of mechanical cleaning. this may be done by scraping, chipping, wire rubbing with abrasive paper or steel wool. however the following sequence of operations to be carried out under mechanical cleaning:(a) scraping of existing paint with hand scraper (b) wire brushing, first with coarse and then with fine wire (c) sand papering with coarse sand paper - no.3 or steel wool - no.2 or emery paper- no.3 or emery cloth.the above procedure gives a reasonable assurance that no loose mill scale or heavy rust is left on the surfaceall the cylinders shall be visually examined for dents, cuts, gouges, bulges, cracks, laminations, corrosion at external and internal surfaces of cylinder as per is:13258. cylinders beyond the acceptable limits as specified in is:13258 shall be branded and declared unserviceable. cylinders having wall thickness less than 2.43 mm for 14.2 kg cylinders shall be rejected. for checking the internal surface of cylinders, a low voltage lamp of suitable intensity shall be used etc..
supply of material - coating,surface tolerant,epoxy, abrasive,paper,emery,60,230x280,si carb, rod,welding,aws a5.16,er ti -7,3x480mm, abrasive,paper,emery,60,230x280,si carb, rope,sq,12sq.mm,ptfe impregnanted asbes, beaker,1000ml,1000ml,5,glass, tray,surgical,12x15inch,ss, unit,fittings-tube bender n cutter,1/2in, battery,alkaline,1.5v,50ma, holder,welding electrode,600 a, etc.
supply of item -coating container , abrasive,paper , rod, welding , rope , tray ,brush , wire , regulator, holder,welding electrode , breaker , unit , battery , paste container