Machinery and Tools, Hardware and Fasteners, Miscellaneous Fasteners, Head Quarters-Andhra Pradesh

Supply Of Indexible Turning Inserts Cnmg 120408 Entmctc 1135Of Ceratizit Make Or Kennametal With Ordering No.2561634 Authorised Dealer Or Sub Dealer Need ToQuote.Hss Taper Shank Drill 13.5 Mm.Is-5103-1969.Make:Addision Or ItHss Taper Shank Drill 14.25Mm.Is-5103-1969.Make:Addison Or ItHss Taper Shank Drill 24.5Mm. Is-5103-1969. Make:Addison Or ItHss Hand Taps 5Mm Pitch 0.8Mm. Is-6175-1992 (Set 3Nos)Make: Addison Or ItM.S. Castle Nuts ( Hex.Hd ) Size: M 20 To Is.Spec.No:5368-1969Stainless Steel Hex.Bolt-M 8 X 25Mm Along With TheFollowing Items. (I) S.S.Hex.Nut - M8 - 01 No. (Ii) S.S. FlatWasher M8 - 01 No. (Iii) S.S. Spring Washer M8 - 01 No.To Is.Spec.No: Astmf. 593 (316,18-8).Hss Taper Shank Drill 4.2Mm Is-5103-1969: Make.Addison Or It; Authorised Dealer Or Sub DealerNeed To Quote.Hss Taper Shank Drill 25Mm. Is-5103-1969.Make:Addision Or It; Authorised Dealer Or Sub DealerNeed To Quote.Hss Taper Shank Drill 5.2Mm.Is-5103-1969.Make:Addison Or It; Authorised Dealer Or Sub DealerNeed To Quote.Hss Taper Shank Drill 28Mm Is-5103-1969.Make:Addison Or It; Authorised Dealer Or Sub DealerNeed To Quote.Hss Taper Shank Drill 10.5Mm Is 5103-1969. Make:Addison Or It; Authorised Dealer Or Sub DealerNeed To Quote.M.S.Flat:65X20 Mm To Is.2004-Class 2,Steel LengthAround 06 Mtrs.S.Ms Key Switch With Zbe 101N Element - 02 Nos AndZbe 102N Element - 02 Nos Colour: Black To Is. 13947.Part - 5. Make: Schneidor Or Telemechanic,Stainless Steel Hex.Bolt With Nut:M8x40mm To IsSpec.No.Astmf593.Ss.(316-18-8)Precision Limit Switch With Top Push Roller 2 No+ 2Nc(Assembled In Line With Contact Block) 2No+2NcJai Model No J02 Tpra Or Any Similar Rdso ApprovedMakes ; Authorised Dealer Need To Quote.Round Lock Multipurpose Godrej Or Sheel ProductCode:9350(For The Use Of Table Drawer)Grinding Wheel Size 400 X 65 X 152.4 Mm Spec:A24 R5 V6-Is 2324/1979. Make :Carborandum (Or) Similar.M.S.Round 71 Mm To Is.2062 Gr.A Length 5 To 6 MetersBell Relay: 400 Ohms, 20 Ma (40 Swg) With 2 Make: And2 Break Contacts To Drg.No: Cwm 04500. DrawingAvailable At Sse/Bi/MftMounting Bush With Special Nut For Dlbi.To Drg.No:Wm.76/83.Drg.Available At Sse/Bi/S&T/Mft.Dial Plate Anodised To Drg.No.4/86A For Sge DoubleLine Block Instrument To Irs.S.22-91. Drg:AvailableAt Sse/Bi/Mft.Dial Plate Anodised To Drg No:4/86B For Sge DoubleLine Block Instrument To Irs.S. 22-91 Drg AvailableAt Sse/Bi/MftHard Wood Planks Size :4 X 2 X 2-6 Conditions : TheSizes Of The Planks Shall Be So After Plaining AndFinishingHard Wood Planks Size : 3 X 2 X 2-6 Conditons: TheSizes Of The Planks Shall Be So After Plaining &FinishingHard Wood Planks Size :5 X 2 X 2- 6. Conditions : The15000Sizes Of The Planks Shall Be So After Plaining AndFinishingHard Wood Planks Size :8 X 3 X 2X 6. Conditions :The Sizes Of The Planks Shall Be So After PlainingAnd FinishingHard Wood Planks Size :7 X 3 X 2 - 6. Conditions :The Sizes Of The Scantlings Shall Be So AfterPlaining And FinishingHard Wood Planks Size :4 X 2 X 4- 3. Conditions : TheSizes Of The Planks Shall Be So After Plaining AndFinishingCutting Wheel For Bosch Grinding Machine Gco2400J,En 12413 Of Size:355X3x25.4Mm(Grindind MachineUse) A30rbf,Make:Bosch OrRalliwolf.Note:Oem/Authorised Dealers To Quote.Cogged Veriflexi BeltSize:37X12x980.Is.No.2494.Make:Supreme Or Similar.30Way Terminal Block Assembly With Contacts ForDouble Line Block Instrument ToDrg.No.Wm.29/87.Drg.Available At Sse/Bi/S&T/MftTapping Screw (Slotted Pan Head) St 4.8X38-C Cr/Cd/NiPlated Confirming To Is:7173.I.S Equal Leg Angles 40X40x6mm To I.S: 808/89 AndI.S:2062/2006 E 250 Grade A.M.S.Flats Steel Size 40 X 6 Mm To Is:2062/2006 E250Grade A With Lengrh 6 Mtrs.Paint Anti Corrosive Bituminous Black To Is:9862/81,WithAmendment No.1 Of 1988 And Reaffirrmmed 1999 Packed In NewSteel Drums Plain (Non Returnable) 20 Ltrs Capacity To Is:2552/79Grade B2.Note:Only Icf/Rcf Approved Sources Nee

Refer document

Refer document