|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Brick work with common burnt clay F.P.S. (non plinth level up to floor V level in all shapes and sizes in : |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 8 | Flexible pipe |
| 9 | 32 mm dia |
| 10 | Providing and fixing soil, waste and vent pipes |
| 11 | 100 mm dia |
| 12 | Sand cast iron S&S pipe as per IS: 3989 |
| 13 | 75mm dia |
| 14 | Sand cast iron S&S pipe as per IS: 3989 |
| 15 | Providing and fixing collar : |
| 16 | 100 mm |
| 17 | Sand cast iron S&S as per IS - 3989 |
| 18 | Sand cast iron S&S as per IS - 3989 |
| 19 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 20 | 100 mm inlet and 75 mm outlet |
| 21 | Sand cast iron S&S as per IS: 3989 |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (EXPOSED) |
| 23 | 20 mm dia nominal bore |
| 24 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 25 | 15 mm dia nominal bore |
| 26 | 20 mm dia nominal bore |
| 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality |
| 28 | 20 mm Nominal bore |
| 29 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 30 | 20 mm |
| 31 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 32 | 45 cm length |
| 33 | 15 mm nominal bore |
| 34 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 35 | 15 mm nominal bore |
| 36 | 20 mm nominal bore |
| 37 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 38 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 39 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 40 | 15mm nominal bore |
| 41 | Cutting holes up to 30x30 cm in walls including making good the same |
| 42 | With common burnt clay F.P.S. (non modular) brick |
| 43 | Providing & Fixing SS Sink AISI 304 ( 18/8 ) Grade complete with CP Waste and other fittings .Size 27\\" x 20\\" x 8\\" |
| 44 | Providing and fixing of Table Top Wash basin complete with CP waste Make Jaquar Fonte FNS-WHT-40931 or equivalent model of approved make to the satisfaction of EIC |
| 45 | MODEL :- FNS-WHT-40931 |
| 46 | Providing and Fixing Chinaware Counter Top Basin 600 x 400 x 160 make Jaquar / CERA / Kerovit / Hindware |
| 47 | Providing and fixing Bib Cock Make Jaquar Range Opal prime Model OPP-CHR-15037PM or equivalent model of approved make to the satisfaction of EIC |
| 48 | Providing and fixing hand shower health faucet ABS body with one meter easy flex tube in crome finish and wall hook complete make Jaquar Model ALD -585 or equivalent model of approved make to the satisfaction of EIC |
| 49 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range floratine or equivalent model of approved make to the satisfaction of EIC |
| 50 | 15mm nominal bore |
| 51 | Providing and fixing of C.P. Towel Ring Square with round flange complete, make Jaquar range Continental Model ACN-1121N or equivalent model of approved make to the satisfaction of EIC |
| 52 | Providing and fixng of CP brass soap dishmake Jaquar / continental ACN -1131 N or equivalent model of approved make to the satisfaction of EIC |
| 53 | Providing anf fixing of CP cup heavy duty complete in all respect as per entire satisfaction and approval of make by EIC. |
| 54 | Providing and fixing mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats steel studs complete in all respect |
| 55 | Providing and fixing flush plate for concealed cistern MODEL NO. JCP-CHR-392415 or equivalent model of approved make to the satisfaction of EIC |
| 56 | Provd & fixing of C.P. Towel Rail 450 mm long make Jaquar Continental Model ACN-1111BNM or equivalent model of approved make to the satisfaction of EIC |
| 57 | Providing and fixing concealed stop cock complete with internal part body make jaquar opal prime or equivalent model of approved make to the satisfaction of EIC |
| 58 | Providing and fixing of overhead shower 200X200 mm square shape single flow with arm dia 20 mm and 450 mm long round shape , make Jaquar OHS 1619 & SHA-479L450 or equivalent model of approved make to the satisfaction of EIC |
| 59 | Providing and fixing of hand shower 80 mm round shapemulti flow with ABS body crome plated with gray face plate without rubit cleaning system and 1.5 mtr long flex tube in crome finish SHS- CHR -1985 or equivalent model of approved make to the satisfaction of EIC |
| 60 | Providing and fixing of CP toilet paper holder make Jaquar Continental Model ACN 1151 N or equivalent model of approved make to the satisfaction of EIC |
| 61 | Providing and fixing of CP tumbler holder make Jaquar Continental Model ACN 1141 N or equivalent model of approved make to the satisfaction of EIC |
| 62 | Providing and fixing of Glass corner self make Jaquar Continental Model ACN- 1173 or equivalent model of approved make to the satisfaction of EIC |
| 63 | Providing and fixing of single lever basin mixture without pop up waste system with 450 mm long braid complete make Jaquare OPAL PRIME or equivalent model of approved make to the satisfaction of EIC |
| 64 | P/F of chinaware wall mounted/wall hanging Eurpeon Style W.C. 360mm X 575mm X 360mm of make (JAQUAR) of approved colour with all other fittings i.e. seatcover Jaquar ARIA or equivalent model of approved make to the satisfaction of EIC |
| 65 | Providing and fixing PVC Connection Heavy Duty Make |
| 66 | Providing and fixing CP Gratting Heavy Duty With/Without Hole Make Please Enable Macros to View BoQ information |
