|
| 1 | PART - A - E.I WORKDismantling the existing E.I. work by Co's own tools & tackles and take unnecessary items away from site by maintening normalcy as far as possible as per direction of EIC . |
| 2 | Point Wiring :Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (make-- RR Cable/ polycab/KEI/Gloster/Havells) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish a)Average run 12 mtr |
| 3 | b) Average run 10 Mtr |
| 4 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (make-- RR Cable/ polycab/KEI/Gloster/Havells) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finishOn Board |
| 5 | Distribution Box: Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS ( Make - Legrand/ABB ITUS/LK/Siemens )8 Way ( Up to 160 A ) |
| 6 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS ( Make - Legrand/ABB ITUS/LK/Siemens )160 A FP |
| 7 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS ( Make - Legrand/ABB ITUS/LK/Siemens )63 TP |
| 8 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment ( Make - Legrand/ABB ITUS/LK/Siemens )6 Way |
| 9 | Supplying and fixing 63A 415 V MCB Isolator on din rail of existing DBs and necessary connection ( Make - Legrand/ABB ITUS/LK/Siemens ) |
| 10 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection ( Make - Legrand/ABB ITUS/LK/Siemens )6 - 32A SP MCB |
| 11 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. ( Make - Legrand/ABB ITUS/LK/Siemens ) 2 + 16 Way |
| 12 | Supplying and fixing 40A 240 V DP MCB Isolator on din rail of existing DBs and necessary connection.( Make - Legrand/ABB ITUS/LK/Siemens ) |
| 13 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment ( Make - Legrand/ABB ITUS/LK/Siemens )a) 2 Way |
| 14 | b) 4 Way |
| 15 | Supplying and fixing 240/415 V change over (MCB module) of on din rail of existing DBs/ enclosure and necessary connection( Make - Legrand/ABB ITUS/LK/Siemens )a) 40A DP |
| 16 | b) 40A FP |
| 17 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection( Make - Legrand/ABB ITUS/LK/Siemens )a) 40 A DP |
| 18 | b) 40 A FP |
| 19 | Supplying and fixing 6 way double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment.( Make - Legrand/ABB ITUS/LK/Siemens ) |
| 20 | Supplying and fixing 16 way double door sheet steel (16SWG), White powder coated cable end box for SPNDB DB enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. ( Make - Legrand/ABB ITUS/LK/Siemens ) |
| 21 | Supply of cables :---Supplying and Delivery of following sizes Al. armoured PVC/XLPE cable [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] as mentioned below : a. 4 core 95 sqmm ( PANEL TO VTPN) |
| 22 | b. 4 core 35 sqmm (from VTPNDB to HTPNDB) |
| 23 | Supply and Delivery of Pvc Insulated 3 Core 4 Sq mm unarmoured Copper Cable. [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] (From OLP starter to AC outdoor unit) |
| 24 | Laying of cables :---Laying of 4 core 35 Sqmm Al. armoured PVC/XLPE cable with 2X10 SWG GI wire making hole etc. as necy., mending good damages and painting as mentioned below : .a. on wall by clamp |
| 25 | b. Concealed in wall |
| 26 | Laying of 4 core 95 Sqmm Al. armoured PVC/XLPE cable with 2X10 SWG GI wire making hole etc. as necy., mending good damages and painting as mentioned belowa. on wall by clamp |
| 27 | b. Concealed in wall |
| 28 | Cable Glands & Socketing:Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a. 4 core 95 sqm |
| 29 | b. 4 core 35 sqm |
| 30 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials . a. 4 core 95 sqm |
| 31 | b. 4 core 35 sqm |
| 32 | Miscellaneous :---Supply and installation of 1-Phase timer in double door SPN DB (2+10) way providing incoming and outgoing copper wires and other accessories. The interconnection should be made by 4 sq.mm. copper wires. The box should be painted by powder coated paint. a) 25A DP MCB -1 No. (b)Analog time switch - 1 No. (c) 2-pole 30A single phase power contactor, - 1 No. (d) Add-on auxiliary contact block(1 NO+1 NC) -1 no (e) 60A capacity 3 way AC/DC Epoxy terminal block.- 1 No. (f) Indicator Lamp (ESBEE make)-2 Nos. (g) Toggle switch,(ON_OFF_ON)- 1 No. (h) Steel Key Lock – 1 No. (Make- LK /ABB) |
| 33 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 34 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 35 | Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 36 | Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 37 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire |
| 38 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. |
| 39 | S/F 415V,3ph,50Hz AC starter unit in SS enclosure make: L&T (Cat no ----MUG10H DOL starter,SS95974) with 2 nos suitable size cable end box incl. S&F analog clock (Legrand make cat no QT-31) on channel with 2nos cable end box (For AC) |
| 40 | S/F of 230V Digital Control starter ( VOLTCHECK, AMPCHECK & TIMECHECKand 3-digit display) for room air conditioner type OLP 21A RAC machine(Electron/Ultratech). |
| 41 | Distribution Wiring Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (make-- RR Cable/ polycab/KEI/Gloster/Havells) of the following sizes in the prelaid polythene pipe /PVC Conduit Pipe and by the prelaid GI fish wire and making necy. connection as requireda) 3 X 1.5 sqmm |
| 42 | b) 2 X 2.5 sq.mm + 1 x 1.5 Sq.mm |
| 43 | c) 2 x 6 Sq.mm + 1 x 4 Sq.mm |
| 44 | d) 2 x 4 sqmm + 1 x 2.5 sqmm |
| 45 | e) 4 x 10 sqmm + 2 x 6 sqmm |
| 46 | f) 4 x 6sqmm + 2 x 4 sqmm |
| 47 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make, medium quality] on wall, ceiling with saddles and other accessories as required and mending good damages to building worksa) 20 mm size |
| 48 | b) 32 mm size |
| 49 | Copper Wire Socketing :Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapesi) 2.5 Sq.mm |
| 50 | ii) 4 Sq.mm |
| 51 | iii) 6 Sq.mm |
| 52 | iv) 10 Sq.mm |
| 53 | v) 16 Sq.mm |
| 54 | Supply of Light Fitting :Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] |
| 55 | Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl. Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] |
| 56 | Supply & Delivery of 240V recess mounted 2'x2' LED downlight having following wattage in white powder coated pressure die cast aluminium housing , with glare free uniform illumination, suitable for 2' x 2' grid ceiling with CCT (5700K-6500K) having minimum luminous efficiency of 120 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]36Watt |
| 57 | Supply & Delivery of minimum10-12 Watt LED Bulkhead light fittings complete with all accessories having die cast aluminium housing finished in premium white powder coating with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]BK/ Wipro LW07-141-XXX-57-G1/Bajaj BIBWP 10W LED) complete set |
| 58 | Supply & Delivery of 240V recess mounted 1'x1' LED downlight having following wattage in white powder coated pressure die cast aluminium housing, with glare free uniform illumination, suitable for 1' x 1' grid ceiling with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]18watt |
| 59 | Fixing of Light Fittings:Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. (Vide page no C-2, Item no 17) |
| 60 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length as per G S Vide page no C2 Item no 16 |
| 61 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. |
| 62 | Fixing only recess mounted 2 ft X 2 ft & 1ft X 1 ft LED Luminaire and hanging the fitting by GI wire and 'L' clamp after cutting / opening the false ceiling incl. mending good the damages as per direction & choice of EIC. |
| 63 | Supply of Fans:Supply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient) [BEE star rated]Sweep Size- 1200 mm (48\\"), Wattage ≤ 55 Watt, R.PM ≤ 380, Air Delivery ≥ 210 C.M.M |
| 64 | Supply & Delivery of following 230V, 1-Ph, Wall Mounting/ Pedestal Air Circulators with all accessories. (Make- Crompton / Usha / Orient/EPC) [BEE star rated] 450 mm Sweep, 1-Ph, 3 Blade, RPM ≤ 1440 , Wattage ≤ 100 Watt, Air Displacement (In CMH) ≥ 5000 Wall Mounting |
| 65 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (make: Schneider/ Legrand) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 66 | Fixing of fans :---Fixing only ceiling fan complete with blades, canopy, fork, rubber bush, etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per G.S. (Vide page no C-3, Item no 21.a.) |
| 67 | Supply & Fixing fan down rod (14 SWG- white MS pipe zinc plated) having 19 mm OD 1.8 +/- 0.05 mm thick complete with cutting, making holes for fixing the fan incl. necessary connection wire (2X1.5sqmm cu wire) as per direction of EIC |
| 68 | Fixing only Wall Bracket fan / Air Circulator Fan on wall by S & F 8\\" x 10\\" size (1\\" Thick) HW Board, rag bolts, nuts and washers (6 mm dia x 62 mm long) or as required incl. S & F 24/.20 PVC insulated flexible copper wire 0.5 mt. length. |
| 69 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:a) 30 cm (12\\") |
| 70 | b) 38 cm (15\\") |
| 71 | c) 45 cm (18\\") |
| 72 | Supply & Fixing GI sheet metal cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)a) 30 cm (12\\") |
| 73 | b) 38 cm (15\\") |
| 74 | c) 45 cm (18\\") |
| 75 | Compound Lighting Arrangement : Supply & Delivery of 240V, LED street lights with optic lens and polycarbonate diffuser having following wattage, in white powder coated pressure die cast aluminium housing with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]120 Watt |
| 76 | S & Erection of PVC Water proof loop box (Mk - Syntex Code - GSMB 2520) of size 8\\" x 10\\" with 100A 4 pole Stud type terminal block, 15A Kitkat fuse & NL, to be fixed on bakelite/porcelin insulator having hinged PVC cover 4mm thick, rubber gasket lining, mechanical locking arrangement to be concealed in wall as per direction of EIC. |
| 77 | Supply & Installation 3 Ph timer unit for Compound Light consisting of the following ; 1. Double door SPNDB Box (2+14 Way) with door locking arrangement (LK / ABB) ----------------- 1 no.2. 22A, 230V, 3 Pole Contactor Unit (Make - ABB / LK) - 1 no.3. Digital (RTC) time switch ( Make - ABB / Lk) - 1 no.4. TP MCB (20 Amp, \\"C\\" Curve) (Make - ABB/Lk) - 1 no.5. By pass Toggle Switch - 1 no.6. Proper interconnection arrangement with 4 (for Ph) & 2.5 (for N & E) sq.mm. PVC FR copper wire (Make- Havells / Polycab) with proper socketing |
| 78 | Lightning Arrestar Work :S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI Pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered/welded with 7/16 stranded GI (Hot DIP) Wire and 85 mm dia 6 mm thick GI Base plate at bottom incl. necessary holes etc complete duly grouted on the parapet etc in CC morter (4:2:1) including thimble joints of 7/16 SWG Wire and (25 x 6) mm GI Strip with SS nuts, bolts & washers. (P-J-2/Item No 14 +NS) |
| 79 | Supply and Fixing of 25 mm x 6mm thick GI (Hot Dip) flat / strips for Horizontal & Vertical run on wall/floor with GI Saddles as required including drilling holes bolts, nuts washers etc and mending good the damages to building works. (Page - G-3/Item 5d) |
| 80 | Cutting cornices/steps etc. including cutting recess in building etc & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works. (P: J -1/Item No - 4)a) Length upto 0.5 Mtr |
| 81 | b) Length above 0.5 Mtr |
| 82 | Supply and Fixing of Testing joints by 25 mm x 6 mm thick GI (Hot Dip) strip 125 mm long on wall after making suitable arrangement to establish a clearence of 50mm from wall for making junction connection with vertical conductor and conductor from earth electrode complete with S&F GI bolts, nuts, check-nuts, spring washers etc as required. (Rate arrived from G.S Page : J - 2/Item -13) |
| 83 | Earthing Work :Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl.S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: i)By TATA-Medium GI pipe (G1/Item No - 2) |
| 84 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe (G2/Item No - 3 a) |
| 85 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. (G2/Item No - 4 b) |
| 86 | Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc. (G3/Item No 5 e) |
| 87 | Cable Tray :Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.With 25x25x3mm angle iron support a)200x50x1.25mm (18SWG) |
| 88 | With 25x25x3mm angle iron support b) 300x50x1.25mm (18SWG) |
| 89 | Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.a) 200x50x1.25mm (18SWG) |
| 90 | b) 300x50x1.25mm (18SWG) |
| 91 | Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.a) 200x50x1.25mm (18SWG) |
| 92 | b) 300x50x1.25mm (18SWG) |
| 93 | PART - B - A.C WORK :Dismantling the existing air conditioner machine indoor & outdoor unit at the time of renovation work as per direction of EIC. |
| 94 | Installation, Testing & Commissioning charges of the above said Air Conditioning system.a) For 1.5 TR Concealed type Split A.C |
| 95 | b) For 2.0 TR Concealed type Split A.C |
| 96 | Refrigeration Piping:Installation and commissioning of hard / soft copper refrigerant piping, complete with fittings, elbows, bends, globe valve of suction & liquid line supporting arrangement on walls incl. S&F of 13 mm thick Nitrile Rubber Insulation tube (Make-Armacell/K-Flex) with supports & brackets as per direction of EIC.a) Gas line copper pipe minimum thickness 0.9mm 5/8\\"dia [Royku/Totaline/Mandeep] with 13mm thick nitrile tube insulation [Make-Aroflex/Acoflex] |
| 97 | b) Liuid line copper pipe minimum thickness 1mm 1/4\\"dia [Royku/Totaline/Mandeep] with 13mm thick nitrile tube insulation[Make-Aroflex/Acoflex] |
| 98 | DRAIN PIPING:-Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. CPVC Pipes Class-1, SDR-11 of dia PWD Sch S&P P-29, Item no-1(a)(make-- Finolex/ Oriplast/ supreme)25mm |
| 99 | Supply & Charging Refrigerant - 410A, R32,R22 as required |
| 100 | Supply and laying of necessary electrical arrangements 4 core x 2.5 mm² PVC insulated FRLS grade Copper cable (make-- Polycab/KEI/Gloster/Havells) for connection betweeen indoor and outdoor units, 1.1 KV grade. |
| 101 | Supplying, fabrication & fixing M.S channel of size (40 mm x 40 mm x 5mm) for making platform for installation of outdoor unit of 1.5/2.0 Tr concealed split AC incl. drilling 2 nos holes in each channel including fixing with fastner etc. fabricated with horizontal angle of 40 mm x 40 mm x 5 mm including Angle inserted into the existing wall. |
| 102 | PART - C - FIRE DETECTION WORKOpening, Checking, Cleaning, Testing & Re-Commissioning of field devices (Detectors, MCP,Hooter and Input/Output device) of the existing fire alarm detection system as per direction of the E.I.C. |
| 103 | Supply and Laying of 2 Core 1.5 Sq.mm FR Copper Cable (Make - Finolex/Polycab/KEI/RR Cable) with 20 mm NB PVC rigid conduit pipe on the surface of the wall. (Make - Precision/Polycab - Medium) |
| 104 | Supplying, Installation, Testing and Commissioning of LED type Response Indicator ( VDS / UL /ERTL/ LPCB / FM approved) having 2 Nos. red coloured LED lamps including connections etc. (Make: Siemens in parity with the existing FDS system) |
| 105 | Supply, Installation, Testing & Commisioning of OPC complied Addressable Manual Call Point ( VDS / UL /ERTL/ LPCB / FM approved ) with in built short circuit fault isolator as per NFPA style 7 wiring complete as required. ( Make: Siemens in parity with the existing FDS system) |
| 106 | Supply, Installation, Testing & Commissioning of Addressable OPC complied Loop Powered Hooter (sound output of minimum 90 db ) cum strobe (strength of light 10 cd) complete with inbuilt short circuit fault isolator. Degree of protection IP65 ( VDS / UL /ERTL/ LPCB / FM approved) approved. ( Make: Siemens in parity with the existing FDS system) |
| 107 | Recommissionig (with software update) of the existing fire detection system.(initial and final checking of all the FDS panel within the CB building of KMCH hospital complex as per direction & satisfaction of EIC) |
| 108 | PART - D - LED GLOW SIGN BOARDSITC of Acrylic SMD Signage LED BoardACP with Acrylic Signage Exterior 3 mm aludecor ACP Board with 3 mm male imported Acrylic Letter with 20Watt LED Tube lamp (make-- Philips/Wipro/Lighting Technology) 26 gauge GI sheet back cover with rain proof power supply. Supporting by the good quality MS structure having size of 1.5\\" X 1.5 \\" angle iron frame duly enamel paint with necessary fixing arrangement and grouting on the top of the brick pillar as per direction of E.I.C. |
| 109 | Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run |
| 110 | [ Rate should be quoted inclusive of all taxes, cess, duties ] Please Enable Macros to View BoQ information |