|
| 1 | Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets, single layer mangalore pattern or similar tiles in roof covering upto a height of 8Mtrs including necessary scaffolding all as specified and directed. |
| 2 | S & F prepainted galvalume aluminium zink coating GI based semi-corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding all as specified and directed. |
| 3 | S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting (Allahabad pattern) 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding complete all as specified and directed. |
| 4 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | S & F 6mm thick, asbestos cement, corrugated or semi-corrugated sheets in roofs, etc. fixed with L Hook or cranked bolts. upto a height of 8 Mtrs including necessary scaffolding all as specified and directed. |
| 6 | M & L Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L hooks upto a height of 8Mtrs including necessary scaffolding and working platform all as specified and directed. |
| 7 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc.under 40 sq. cm in section, in any position complete all specified. |
| 8 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc.40 sq. cm and over in section, in any position complete all as specified and directed. |
| 9 | S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A upto a height of 8Mtrs including necessary scaffolding all as specified and directed. |
| 10 | M&L in repairs 4 mm thick E board tiles for insulation and accoustic purpose 60cmX60 cm with and including powder coated galvanium iron snap grid with 32mmX25mmmX1.5 mm thick tee section and 32mmX25mmX1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling and making good disturbed surface complete all as specified and directed . |
| 11 | M&L in repairs for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per RM and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) and including plaster of paris fancy moulding pattern in corners of ceiling in triangular or any shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.complete all as specified and directed. |
| 12 | Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each. complete all as specified and directed. |
| 13 | Taking down chowkats with shutter (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 sqm each complete all as specified and directed. |
| 14 | Taking down of shutter n.exc 1.00 Sqm each all as specified and directed. |
| 15 | Taking down of shutter but exc 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed. |
| 16 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 17 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge. |
| 18 | S & F pressed steel frames for doors size 105mmx60mm x1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 19 | S & F pressed steel frames for doors size 125mmx60mmx1.25 mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 20 | M&L for PCC for hold fast and filling hollow of steel frames and simliar works type B0 (1:3:6 ) (using 12.5mm graded aggregate etc complete all as specified and directed. |
| 21 | S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete including treating theback of chowkats with coal tar black paint. |
| 22 | S & F 30 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 23 | S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 24 | S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a) complete all as specified and directed. Please Enable Macros to View BoQ information |
