|
| 1 | Dismantling plain or corrugated steel sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings sheets. complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed |
| 3 | S&F Plain, galvanised, mild steel sheeting of 0.63 mm thickness, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 5 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410, complete all as specified and directed. |
| 6 | M&L for Preparation of New steel surface of any description over 10 cm width or girth, not otherwise specified and applying two coats of synthetic enamel paint over red oxide primer. complete all as specified and directed. |
| 7 | Dismantling of floor tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed . |
| 8 | M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with Epoxy to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed. |
| 9 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 10 | Description all as per item no. 09.00 above but on skirting over with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 11 | M&L glazed ceramic coloured (dark & light shade combination) tiles in 450x300x7-8 mm / 300x450x7-8mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxy to match over with and including 10mm thick backing coat in CM 1:3 and complete all as specified and directed. |
| 12 | M&L for Designer glazed ceramic coloured (dark & light shade combination) tiles of approved pattern and make of any size on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxy to match over with and including 10mm thick backing coat in CM 1:3 and complete all as specified and directed. |
| 13 | M&L for Designer Wall cladding tiles of 10-12mm thick of approved pattern and make of any size on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxy to match over with and including 10mm thick backing coat in CM 1:3 and complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed. |
| 15 | M&L for Machine cut kota stone slab flooring 20-25mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver interlocking block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 17 | M&L coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed of CM 1:6 over PCC of 100mm thick of type D-2, 1:4:8 complete all as specified and directed. |
| 18 | Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 19 | M&L for Old size Brickwork with Cement mortar with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6. complete all as specified and directed. |
| 20 | Excavation over areas n.exc 1.50m deep & getting out in soft/loose soil. complete all as specified and directed. |
| 21 | Demolition of Cement Concrete (unreinforced) in Ground floor and pavings n exc 15cm thickness( Below or Above Ground level) complete all as specified and directed. |
| 22 | M&L for 75mm thick Hardcore of Broken stone of boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. Complete all as specified and directed. |
| 23 | M&L for 75mm thick Cement Concrete, type C-2, 1:4:8 (40mm graded aggregate). Complete all as specified and directed. |
| 24 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided. Complete all as specified and directed. |
| 25 | M&L RCC in nominal mix , Type B1 1:2:4 (12.5mm graded) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, included necessary form work, Complete all as specified and directed. |
| 26 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Complete all as specified and directed. |
| 27 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, lintels,landings and similar work; not exceeding 200mm thick, Complete all as specified and directed. |
| 28 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, Complete all as specified and directed. |
| 29 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. Complete all as specified and directed. |
| 30 | Dismantling old unserviceable kitchen cupbord shutter with frame, Complete all as specified and directed. |
| 31 | S & F of 18 mm thick HDHMR base material for cabinet finishes for making modular kitchen with tandem drawer cupboard including all necessary fittings, complete all as specified and directed. Note: Laminate to be provided over cupboard base material. |
| 32 | S & F of SS rectangular Hettich/Godrej Interio/Wurfel Kuche or equivalent CargoTech M SS Modular kitchen Thali/ plate/ Jar basket (836mm x 500mm x 200mm)/cab.900mm, with all necessary fittings like drawer channels etc complete all as specified and directed. |
| 33 | S&F of Hettich/Godrej Interio/Wurfel Kuche or equivalent Cargo Cutlery Basket (836mmx500mmx94mm) with all necessary fittings like drawer channels etc. complete all as specified and directed. |
| 34 | S&F of Hettich/Godrej Interio/Wurfel Kuche or equivalent Bottle pull out of 2 tier for cabinet width 240mm with all necessary fittings like drawer channels etc. complete all as specified and directed. |
| 35 | S&F of Hettich/Godrej Interio/Wurfel Kuche or equivalent Dish Rack with Draining board 600mm with all necessary fittings like drawer channels etc. complete all as specified and directed. |
| 36 | S&F Hettich/Godrej Interio/Wurfel Kuche or equivalent self closing hinges 75 mm long. Complete all as specified and directed. |
| 37 | S& F Hettich/Godrej Interio/Wurfel Kuche or equivalent Magnet lock 30 mmm long. Complete all as specified and directed. |
| 38 | S& F Hettich/Godrej Interio/Wurfel Kuche or equivalent 150mm long SS fancy pull type handle oval D with screw complete all as specified and directed |
| 39 | S&F in repair of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm. Complete all as specified and directed. |
| 40 | S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including dismantling of old frame, complete all as specified and directed. |
| 41 | Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid, including dismantling old ceiling board, complete all as specified and directed. |
| 42 | Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish w/o using extra cement, including taking down existing plaster complete all as specified and directed. |
| 43 | M&L for Preparation of New plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed. |
| 44 | Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish w/o using extra cement, includig taking down existing plaster complete all as specified and directed. |
| 45 | M&L for 15mm thick Rough cast Cement plaster 1:4 on fair faces of brick work or concrete surfaces, including taking down existing plaster Complete all as specified and directed. |
| 46 | M&L for Preparation of New plastered surface of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Complete all as specified and directed. |
| 47 | M&L for Complete removal of existing treatment on walls and applying one coat of alkali resistant primer and two coat of Oil bound distemper. Complete all as specified and directed. |
| 48 | M&L for Complete removal of existing treatment on walls and applying one coat of alkali resistant primer and two coat of weather proof Exterior paint. Complete all as specified and directed. |
| 49 | Taking down Wall panelling and similar work. Complete all as specified and directed. |
| 50 | S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls. Complete all as specified and directed. |
| 51 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed. |
| 52 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed. |
| 53 | Refixing in the same opening after taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames),making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregate) Complete all as specified and directed. |
| 54 | Refixing in the same opening after taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (Without taking off shutters from the frames),making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregate) complete all as specified and directed. |
| 55 | S&F Powder coated Anodised aluminium frame for doors, aluminium windows and ventilators with one or more rebates including joining cleats and rubbers as required for fixing etc. complete all as specified and directed. |
| 56 | S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, tower bolt 2 Nos in each door, 3 nos x hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. NOTE: Glass panes and wire cloth shall measured separately and Rubber beading will not be weighed and not to be paid seperately. |
| 57 | S&F Powder coated Anodised aluminium sliding windows & ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.Note : (i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 58 | S&F 4mm thick Sheet glass/figured glass, ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane, including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, Complete all as specified and directed. |
| 59 | S&F of 6mm thick Tinted sheet glass of ordinary quality in squares exc 0.5 sq m each pane including eiching glass with approved design and pattern. Complete all as specified and directed. |
| 60 | S&F of 4mm thick fluted glass of ordinary quality in squares exc 0.5 sq m each pane including eiching glass with approved design and pattern all as specified. |
| 61 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 62 | S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed. |
| 63 | S&F of Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm. Complete all as specified and directed. |
| 64 | S&F of Aluminium Mortice lock, vertical type of 2 levers of size 100 mm. Complete all as specified and directed. |
| 65 | M&L for fixed or movable frameless door made of toughened (tempered) safety glass as IS 2553(Part-1):2018,flat,clear,10mm thick including SS patch fittings of the suitable load capacities and including SS handle and suitable locking arrangements,including beading, etching glass with approved design and pattern complete all as specified and as directed. |
| 66 | M&L Modern designer SS Grade 304 room divider/partition fabricated from 2.0 mm thick stainless steel sections & panels,mirror/hairline finish, coated with premium PVD (physical vapour deposition) coating in rose gold/ gold colour, including uniform corrosion-resistant, scratch resistant finish, fabricating, TIG welding, grinding, polishing, SS hardware, anchor fasteners, fixing complete in all respect as per approved by E-in-charge, complete all as specified and directed. |
| 67 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, and removing surplus soil to a distance n.exc 50 m in soft/ loose soil. Complete all as specified and directed. |
| 68 | Removal of excavated soil to a distance exc 500m but n. exc.1.5 KM and depositng where directed, complete all as specified and directed. |
| 69 | M&L PCC 1:2:4 type C2 using 20 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 70 | S&F of MS Hollow frame75x50mm of 3mm thickness, and MS flat section 50x6mm for making partition, and applying two coat of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 71 | M&L for fixing Designer terracotta tiles of 220x220x63mm thick of any approved pattern, using 6mm thick layer of Nuvocotto tile adhesive between each block while spacing the grid. complete all as specified and directed. |
| 72 | S&F in repair superior quality SS Curtain rod, 20mm dia with and including SS bracket 2 Nos for each opening and fancy type SS side knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed. |
| 73 | S&F in repair Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded) (Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 74 | S&F in repair CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 75 | S&F in repair 15 mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 76 | S&F in repair 15 mm dia Stop valves / angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 77 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 78 | Taking up or down 15/20mm bore steel / composite / CPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 79 | Supply & Laying of CPVC pipe, class-1 (SDR 11), 15mm Nominal size & fittings on walls/ceiling or laying in floors Complete all as specified and directed. |
| 80 | S&F Brass Elbow for special fitting of 15mm Nominal size CPVC pipe complete all as specified and directed. |
| 81 | S&F Brass Tee for special fitting of 15mm Nominal size CPVC pipe complete all as specified and directed. |
| 82 | Supply&Laying of CPVC pipe, class-1 (SDR 11), 20mm Nominal size & fittings on walls/ceiling or laying in floors Complete all as specified and directed. |
| 83 | S&F Brass Elbow for special fitting of 20mm Nominal size CPVC pipe complete all as specified and directed. |
| 84 | S&F Brass Tee for special fitting of 20mm Nominal size CPVC pipe complete all as specified and directed. |
| 85 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches Complete all as specified and directed. |
| 86 | S&F, PVC Floor trap 75mm bore with grating including jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) Complete all as specified and directed. |
| 87 | S&F PVC (SWR) bends 75 mm bore with/without access door any radius Complete all as specified and directed. |
| 88 | S&F in repair Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed Complete all as specified and directed. |
| 89 | S&F in repair Grating round 140 mm size of PTMT (Minimum weight 50 gms) Complete all as specified and directed. |
| 90 | S&F Liquid soap container of CPT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) Complete all as specified and directed. |
| 91 | S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified and directed. |
| 92 | S&F in repairs 10 Litre capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed. |
| 93 | S&F in repair CP cardiff brass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as specified and directed. |
| 94 | S&F in repair vitreous china urinal bowl type (back or corner wall type) , complete including providing & fixing) plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with & including 60mm long brass screws pointing around urinals backin cement; fixing autiomatic flushing cistern with brackets, flush pipe, grating & union for discharge pipe. ( Including of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 95 | Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed. |
| 96 | Taking down carefully copper/aluminium Submain wiring from battan /conduit from DBs,MCBs, etc) and making good to disturbed surfaces of walls, floor etc. Complete all as specified and directed. |
| 97 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic new concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment Complete all as specified and directed. |
| 98 | Description all as per item No 97.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board. Complete all as specified and directed. |
| 99 | Description all as per item No 97.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board. Complete all as specified and directed. |
| 100 | Description all as per item No 97.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd. Complete all as specified and directed. |
| 101 | Description all as per item No 97.00 above but point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 Sq mm single core cable connected to earth plug socket for AC. complete all as specified and directed. |
| 102 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts Complete all as specified and directed. |
| 103 | S&F Modular switch 1 way 16A 1 module Complete all as specified and directed. |
| 104 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 105 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type 230 Volts, AC complete all as specified and directed. |
| 106 | S&F Modular lamp holder, insulated body with back plate including LED Bulb of 9 watt suitable for batten fittings and complete all as specified and directed |
| 107 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size. Complete all as specified and directed. |
| 108 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed |
| 109 | Supply & fixing Modular type (1/2 module as per site requirement) ceiling fan regulator electronic step type suitable for 1200mm/1400mm sweep fan. Complete all as specified and directed. |
| 110 | S&F for decorative wall light stainless steel rust free fixture with white glass diffuser including 10 Watt capacity minimum filament lamp. complete all as specified and directed. Make :Havells Voila wall light or equivalent make of Bajaj/Philips/Crompton. |
| 111 | S&F LED light fitting 40watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any crack. The fitting should have following technical specification (i) surge protection of minimum 2 KV, (ii) power factor should be more than 0.90 (iii) cool white colour, (iv) total hormonic distoration (THD) should not be more than 15% (v) lumen output should not be less than 1700 lumens, (vi) can withstand with input voltage range 140-280V AC, (vii) colour rendering index should not be less than 80, (viii) Corelated colour should be minimum 6000 degree Kelvin (ix) Minimum warranty period of 2 Years. |
| 112 | Supply and Fixing in replacement Warm White LED light fittings 36 watt diffuser type Recess/Surface Mounting type with mounting arrangement (Recess suitable for, 2x2 Grid, Hanging) CCT 6500K, powder coated CRCA sheet steel with high quality LGP and PMMA diffuser. Separate HPF driver suitable for Armstrong and grid ceilling LED 240 volt along with fixing arrangements complete all as specified and directed |
| 113 | S&F Sheet metal enclosure distribution board SP&N,12way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed |
| 114 | Supply and fixing MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed :-Note : Make of the MCB should be the same as that of DB. |
| 115 | Supply and fixing MCBs SPN 32Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) Complete all as specified and directed. :-Note : Make of the MCB should be the same as that of DB |
| 116 | S&F i Sheet metal enclosure distribution board VTPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCCB as incoming and MCB's as outgoing in DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with PCC works complete all as specified and directed |
| 117 | Supply and fixing MCCBs FP 100 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) Complete all as specified and directed. :-Note : Make of the MCCB should be the same as that of DB |
| 118 | Supply & fixing in replacement of Bldg security light fitting LED 30 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. Complete all as specified and directed. .Make bajaj/Halonix/Orient |
| 119 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 120 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP. Complete all as specified and directed. |
| 121 | Supply & Fixing BLDC type ceiling Fans complete with blades, down rods of length 2 to 3 feet or as required on ground, electronic regulator and accessories 230 V with minimum air delivery 245 CFM ,1200 mm sweep size , white in colour with remote control & copper winding, BEE 5 Star rated Complete all as specified and directed. |
| 122 | S&F in replacement PVC air fresh air Fan 200/250 mm sweep, 230 volts, fixed on wall with suitable size nut, bolts and washers and connection complete all as specified & directed. Note; Make a hole as per site requirement rate include in this price. |
| 123 | S&F for wall mounted kitchen chimney electrically operated 230 V suction capacity 1100 cum/hour with 01 stainless steel baffle filters size of chimney 60 cm x 45 cm with necessary PVC out let pipe of suitable dia and length incl push button/touch control, low noise operation necessary connectecd items complete all as specified and directed. |
| 124 | Supply & Fixing Exhaust Fan iron body with louvers and accessories 230 V 450/300 MM sweep heavy duty with blades & copper winding with service value complete all as specified and directed. |
| 125 | Dismantling of existing geyser from installed position including disconnection of electric supply, inlet and outlet pipes and shifting to premises as directed and refixing the same at new or same location on wall with suitable 4 no. of clamps/fastners, including inlet and outlet pipes for geyser with proper alignment and levelling and reconnection of electrical wiring complete in all respect as specified and directed. (Note : Cost of labour, clamps/fastners, and inlet and outlet pipe for geyser are included in unit rate.) |
| 126 | M&L for Earthing complete with galvanised mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole or wall with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth pit to top of earth plate electrode including all excavation and earth work in any type of soil and removal of soil upto 10 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel , CI frame etc Complete all as specified and directed.NOTES : (i) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.00 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order (iii) Items includes cost of 7.5 metre earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides. |
| 127 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 35 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including taking out existing u/s cable Complete all as specified and directed.Note : Sand cushioning, cable protection, GI protection pipe, clamps, and excavation & earth work shall be measured & paid for separately. |
| 128 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for pipe line in soft/loose soil, & getting out complete all as specified and directed. |
| 129 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed. |
| 130 | M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed. Note : Thickness after punning shall be considered for payment. |
| 131 | supply and fixing GI pipe medium grade of 50 mm for cable protection along wall /electric pole/passing under road of width 4 mtrs including necessary clamps,bolts all as specified and directed |
| 132 | M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed. Please Enable Macros to View BoQ information |
