|
| 1 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles |
| 2 | Brick work with old size sub class 'B bricks straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6). |
| 3 | Taking down cement plaster on brick or stone walls/ceiling concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 4 | M&L for rendering 15 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufactures instructions finish the surface to even & fair complete all as specified and as directed.Note : Liquid WPC shall be measured and paid seperately under relevant item of this BOQ. |
| 5 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed. |
| 6 | M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and as directed. |
| 7 | M&L for applying two coats of 100% Premium plastic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior ceiling paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of interior primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 8 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 9 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sq. m each. |
| 10 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off out of MoD land complete all as directed |
| 12 | M&L for 50mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panels complete all as specified & directed. |
| 13 | M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and directed by Engineer-in-Charge |
| 14 | Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed. |
| 15 | Dismantling Asbestos cement (corrugated,semicorrugated ,etc ) in roof covering complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for Pre- painted galvalume aluminum zinc coating GI based semi corrugated /manglore pattern steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa and AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 17 | S&F pre painted Plain galvanised, mild steel sheet 0.50 mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 150 all as specified and directed. |
| 18 | M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete. |
| 19 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 20 | S&F anodised grid (of size 605 mm x 605 mm) frame make for false ceiling including providing hangers of 2-3mm GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed. |
| 21 | M&L for 4mm thick Non asbestos fibre cement designer building/ceiling boards size (600mmx600mm) fixed with screws to snap grid works in ceiling complete all as specified and directed by Engineer -in-charge |
| 22 | M&L for 75mm thick Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified & directed. |
| 23 | M&L for 80 mm factory made chamfered edge precast concrete interlocking paver blocks any shape and size locally available of best quality and confirming to IS 15658-2006 , M-30 Grade with grey cement and pigments with appproved colour design &pattern as in footpath, parks, lawan,or light traffic ways of required strength made by table vibratory method using PU mould laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, compacted and proper embedding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complte grey cement and pigments complete all as specified and as directed. |
| 24 | M&L cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed all as specified. |
| 25 | S&F steel windows with side hung shutter including projecting type hinges with steel handle and peg stay complete with glazing bars, dovetailed or welded, complete all as specified and as directed. |
| 26 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 27 | M&L for 4.0 mm thick plain Sheet glass, ordinary quality and glazing with secured in wooden beads or snap fit glazinng clips square not exc 0.5 sq. m in each pane |
| 28 | S&F mild steel plain black sheet in steel gate and similar work, cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to steel framing with plain 4mm lap joints or welded seams ias required and all as directed. |
| 29 | Dismantling timber scantlings (framed work) exc 40 Sq cm in section in any position complete all as specified and as directed. |
| 30 | M&L 150 mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 31 | M&L for laying of 40mm thick bitumen mastic bearing coarse(as per specifications) with insudtrial bitumen of grade 85/25 conforming to IS: 702 prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm center to center in both directions. pressed into surface protruding & coarse agg with a VG-30 bitumen conforming to IS -73 with min 14% mm to 4mm over mastic surface. (Considering bitumen using 10.2% of total wt) including preparation of surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying priming/ tack coat with paving bitumenous primer @ 5 kg per 10 sqm all as specified and directed by Eng-in-charge Please Enable Macros to View BoQ information |
