|
| 1 | 1ST STEPRemoval of all existing gola/cracks to be repaired with code 301 dosage- first saturate the surface then apply nerru application [primer coat] act like a bond coat before any repairing work and ratio.1kg code 301: 1kg cement then polymer mortar ratio, add 10% by the wt. of cement 1:4 with adding small aggregates for gola etc. On brick bat coba. leave for water curing for two-three day approx. rest is depending upon the site repair condition.2ND STEP: -Now the sealing of joints between steel frame with concrete surface with HY 100 modulus polymer /polyurethane sealant, isocyanite-solvent sealants high UV & aggressive atmosphere resistance with high movement accommodations. Eloginatation at break 400%, tensile strength approx 1 mpa & movement accommodation factor+- 25 %, tack free>40 mins after proper cleaning & free from all foreign particles & on dry surface sealing of joints application job work will be done by assigned waterproofing applicators.Contd to Srl Item No 1.01 |
| 2 | 3RD STEP: -Clean the mortar surfaces properly & free from all foreign particles then saturate sprinkle water on the surface before priming now apply coat of primer with 4” brush code 604 astmd 1227-87 type iii standard water base eco-friendly system which penetrates the cementitious surface. /efflorescence resistant primer ratio 604 primer 20 ltr. & add 10ltr water after 3 to 4 hrs of priming now apply 1st coat of RS ultra-code 654 PU based next generation polyurethane dispersants based waterproofing coating with 4” nylon brush hybrid single pack white in color monolithic elastic waterproofing flexible membranes astmd 6083 type excellent UV resistance with 93%, cracks bridge up to 2mm + elongation at break astm 412 >+ -300%, tensile strength + - 150n/mm sqr. Two coat application with in an interval of 3hrs. to 4 hrs at marked roof surface with sec. reinforcement with 4” overlapping of joints with fiber mesh. leave for 5 to 6 days for atmospheric curing.Note: -The entire job is carried out authorized water proofing applicator should have Min 10-year experience for water proofing |
| 3 | Rendering 10mm thick on roof surfaces incl parapet etc in CM 1:4 finished even and sooth using extra cement complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | Glazed ceramic coloured Digital tiles in vertical surface 300x600x7 mm thick Glosy finish, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified and directed. |
| 6 | Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm. Set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed. |
| 7 | Vitrified ceramic tiles (light shade) 10mm thick (Square/reactangular) area of each tiles exceedings 0.18Sqm but not exceeding 0.38sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 complete all as specified and directed. |
| 8 | 16-18mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed. |
| 9 | Bib cock 15mm dia bore, fancy type choromium plated cast copper alloy with wall flange & aerator fixed in repairs all s specified and directed. |
| 10 | Angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe fixed in repairs, complete all as specified and directed. |
| 11 | Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 12 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified. |
| 13 | Urinals of size 340x320x600mm (top inlet) with fixing accessories complete all as specified and directed. |
| 14 | Straight urinal partion of 10mm thick toughened glass of size 900x450mm fixed in repairs complete all as specified and directed. |
| 15 | Vano bend for urinal complete all as specified and directed. |
| 16 | Urinal spreader of PTMT of size 15mm bore complete all as specified and directed. |
| 17 | Table top wash hand basin of size 495x395x150mm of make as mentioned in list of make complete all as specified and as directed as approved by GE. |
| 18 | Waste coupling of chromium plated brass 32/40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin fixed in repairs complete all as specified and directed. |
| 19 | PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore fixed in repairs, complete all as specified and as directed. |
| 20 | Vitreous china wall hung wash basin with fixing accessories, white, flat back, size 590mm x 490mm x 185mm full pedestal including 15mm bore CP Central hole Basin Mixer with Popup waste system with 450mm long braided hoses for mixing hot and cold water screwed down for iron pipe including 32mm dia waste coupling,waste pipe, cutting for and pinning in ends of brackets or erecting stand porcelain stopper a pair of CI brackets fixed in repair complete all as specified and directed. |
| 21 | Rimless bowl with cistern for coupled WC of size 360x610x805mm with uv soft closet slim seat cover, hinges, dual flushing cistern fittings fixing accessories and complete accessories set including 'P' trap complete all as specified and directed. |
| 22 | Vitreous china wash down water closet pan pedestal pattern in white colour with 'P' or 'S' traps excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. |
| 23 | PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe etc. fixed in repairs, complete all as specified and as directed. |
| 24 | Chromium plated brass towel rail 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls and fixed in repairs complete all as specified and as directed. |
| 25 | Towel ring of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats etc fixed in repair, complete all as specified and directed. |
| 26 | Corner glass shelf assembly consisting of 8 mm thick sheet glass shelf with chromium plated bracket guard complete all as specified and directed. |
| 27 | PTMT Grating Round 140 mm dia fixed in repairs complete all as specified and directed. |
| 28 | Waste pipe for SINK/WHB/Urinal for 32/40mm dia fixed in repairs all as specified & as directed. |
| 29 | Dismantling water tanks of cap exc 500 but n.exc 1000 ltr all as specified and directed. |
| 30 | Rotational moulded polyethylene 03 layer water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed. |
| 31 | 20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed. |
| 32 | Ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20mm dia bore fixed in repairs, complete all as specified and directed. |
| 33 | Taking up or down steel water tubing and connections of 15mm bore all as specified and directed. |
| 34 | Taking up or down steel water tubing and connections of 20mm bore all as specified and directed. |
| 35 | Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 36 | Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 37 | 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 38 | Brass elbow reducer of 25mmx15mm complete all as specified and directed. |
| 39 | 110mm bore PVC SWR Type-B (Pressure not less than 6 Kg cm2) pipes single socket in any length with rubber joints laid in trenches or in floors etc all as specified and directed. |
| 40 | PVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, fixed in repairs complete all as specified and directed. |
| 41 | 75mm bore PVC SWR Type-B (Pressure not less than 6 Kg cm2) pipes single socket in any length with rubber joints laid in trenches or in floors etc all as specified and directed. |
| 42 | PVC (SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, fixed in repairs complete all as specified and directed. |
| 43 | PVC SWR bends any radius 75 mm bore provided with access door, complete all as specified and as directed. |
| 44 | PVC SWR bends any radius 110 mm bore, complete all as specified and as directed. |
| 45 | PVC (SWR) branch piece of 75 mm bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door complete all as specified and directed. |
| 46 | PVC (SWR) branch piece of 110 mm bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door complete all as specified and directed. |
| 47 | PVC (SWR) 75 mm junction single, (Double Y) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed. |
| 48 | PVC (SWR) 110 mm junction single, (Double Y) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed. |
| 49 | PVC (SWR) 75 mm junction single, (Single T) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed. |
| 50 | PVC (SWR) 110 mm junction single, (Single T) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed. |
| 51 | PVC (SWR) 110 mm reducers complete all as specified and as directed. |
| 52 | PVC (SWR) vent cowl for 75mm dia fixed, all as specified. And directed. |
| 53 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed, complete all as specified and directed. |
| 54 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed. |
| 55 | Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed. |
| 56 | Aluminium powder coated door shutter with powder coated frame of size 65mm x 50 mm x 1.6 mm thick fixed with hinges and shutter with top rail,bottom rail, middle rail and style of size 85mmx 44mm x 1.6 mm thick with 200mm size aluminium handle on both side of shutter aliminium tower bolt 150 mm long 2 Nos per leaf including 5.5 mm thick selected quality , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed hydraulic door closer for each leaf , mortic lock 4 levers with 2 Nos key , 3Nos butt hinges of stainless steel for each shutter including provn of 8 mm dia nut and bilt on both side of top rail and bottom rail complete all as specified and as directed. |
| 57 | Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wire mess shall be measured and paid separetely) including necessary joining cleats, glazing rubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 N.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified and directed. |
| 58 | Taking down wall panelling including any type of aluminium door, windows and partition in any position complete all as specified and as directed. |
| 59 | PVC wall lining/panelling consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame including 5mm thick pvc sheet filet of width 35mm to make pvc frame as per manufacturers instruction and drawings, complete all as specified and directed. |
| 60 | Door closer hydraulically regulated, aluminium extruded section body designation No. 2, universal type, suitable for door shutters of 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed. |
| 61 | Double action door spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made steel heavy duty complete all as specified and as directed. |
| 62 | Brass body Mortice lock,4-levers vertical type, size 100 mm with & including escutcheon plates and two keys, complete all as specified and as directed. |
| 63 | Sheet glass ordinary quality, 5mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and as directed. |
| 64 | Taking down and refixing in position of aluminium door shutters of any size and description and making functional by way of repair/ replacement of floor spring, hydraulic door closer, hinges, lock, rubber packing etc as required complete all as specified and as directed. |
| 65 | Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed |
| 66 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed. |
| 67 | Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed. |
| 68 | 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 69 | Aluminium handles cast type anodised of size 125mm long ISI marked complete all as specified and as directed. |
| 70 | 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed. |
| 71 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets/GI grid framework complete all as specified and directed. |
| 72 | False ceiling grid galvanzed steel tee/ angle (Powder coated ) of grid size 600x600mm comprising of main and secondry tee ( weight not less than 240gm /RM) and wall perimeter angle (weight of section not less than 217gm/RM) all around of walls suspended with 4mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type including 4mm thick designer ceiling boards size 595x595mm fixed in position all as directed. |
| 73 | 25mm outer dia stainless steel decorative drapery rod of thickness 20 guage for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150mm outer side from the clear opening of doors/ windows (including necessary fittings), fixed in repairs complete all as specified and as directed. |
| 74 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper complete all as specified and as directed. |
| 75 | Preparation of old painted surfaces with complete removal of existing treatment & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall complete all as specified and directed. |
| 76 | Dismantling of asbestos, cement (corrugated, semicorrugated, etc.) sheets in roof coverings , complelet all as specified and directed. |
| 77 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 78 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or Gde E 165 complete all as specified and directed. |
| 79 | Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed. |
| 80 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed. Please Enable Macros to View BoQ information |
| 81 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed. Please Enable Macros to View BoQ information |