|
| 1 | Construction of Protection /CGI shed for DG set Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.all kinds of soil. |
| 2 | Providing,Laying of dry Stone Soiling hand packed in horizontal all Carriage complete job. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size |
| 5 | Centering and shuttering including strutting,propping etc.and removal of form work for foundation,Walls etc. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 8 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 9 | Providing and fixing High -Rib profile coloured sheets 0.50mm roofing including vertical/curved surface fixed with polymer coated J or L hooks ,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead , including a coat of approved steel primer and two coats of f approved paint on overlapping of sheets complete(upto any pitch in horizontal/vertical por curved surface )excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required .0.50mm thick with zinc coating not less than 275gram/m. |
| 10 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 11 | Carriage of Material by Mech. Transport from source to site of work incl.loading , unloading and stacking of materials at site of work. Steel 100km. |
| 12 | Cement for average lead of 15Km |
| 13 | Sand for average lead of 10Km. |
| 14 | Stone aggregate for average lead of 10Km. |
| 15 | Construction of CGI shed for firewood Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.all kinds of soil. |
| 16 | Providing,Laying of dry Stone Soiling hand packed in horizontal all Carriage complete job. |
| 17 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 18 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size |
| 19 | Cement concrete flooring in 1:2:4 (1 cement: 2coarse sand: 4 graded stone agg., 20mm nominal size finished with a floating coat of neat cement slurry all inclusive leads, lifts, loading, un-loading, head load, cost and carriage of materials from approved nearest sources to site of work complete.50mm thick.with 20mm nominal size stone aggregate. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 21 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 23 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 24 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 25 | Providing and fixing High -Rib profile coloured sheets 0.50mm roofing including vertical/curved surface fixed with polymer coated J or L hooks ,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead , including a coat of approved steel primer and two coats of f approved paint on overlapping of sheets complete(upto any pitch in horizontal/vertical por curved surface )excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required .0.50mm thick with zinc coating not less than 275gram/m. |
| 26 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 27 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 29 | Carriage of Material by Mech. Transport from source to site of work incl.loading , unloading and stacking of materials at site of work. Steel 100km. |
| 30 | Cement for average lead of 15Km. |
| 31 | Sand for average lead of 10Km. |
| 32 | Stone aggregate for average lead of 10Km. Please Enable Macros to View BoQ information |
