|
| 1 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I. B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2 |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.10 |
| 3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.6.3 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.2 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.1 |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) B.C.D. S.O.R. Item No. 5.3.10 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.9.1 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. B.C.D. S.O.R. Item No. 5.3.17.1 |
| 9 | Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. B.C.D. S.O.R. Item No. 5.2.6 |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). B.C.D. S.O.R. Item No. 5.3.5 |
| 11 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints all complete job as per building specificition and direction of E/l. B.C.D. S.O.R. Item No. 5.2.14 |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). B.C.D. S.O.R. Item No. 5.3.11 |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. B.C.D. S.O.R. Item No. 5.3.17.5 |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. B.C.D. S.O.R. Item No. 5.3.17.3 |
| 15 | Providing and fixing fan hook of 16mm dia TMT M.S. bar 1 meter long bent to required size and shape placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.13 |
| 16 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.5.12 |
| 17 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle thresholdof mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14.1 |
| 18 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.4.38 |
| 19 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately) 21.1.2.1 Anodised aluminium (anodised ransparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR 21.1.2.1 |
| 20 | Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item): With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) . DSR 21.3.2 |
| 21 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . B.C.D. S.O.R. Item No. 5.6.28 |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. D.S.R. Item No. 8.31 |
| 23 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.7.6 |
| 24 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. B.C.D. S.O.R. Item No. 5.7.3 |
| 25 | Providing 19mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.15 |
| 26 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.7 |
| 27 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. B.C.D. S.O.R. Item No. 5.7.2 + 5.7.11 |
| 28 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.4 : 8mm dia Bar - |
| 29 | B.C.D. S.O.R. Item No. 5.5.5 (a) : 10mm dia Bar - |
| 30 | B.C.D. S.O.R. Item No. 5.5.5 (b) : 12mm & above dia Bar - |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R 13.80 |
| 32 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors and taxes all complete as per specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.18 |
| 33 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).D.S.R. Item No. 13.47.1 |
| 34 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.32 |
| 35 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.43 |
| 36 | Supplying, fining and fixing 40mm high viterous white glazed earthen ware E.W.C with P-trap of Parry, Hindustan or any other I.S.S. make including supplying and fixing 15 ltr. C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle or R.S. brackets with telescopic flush pipe with brass coupling and plumber joints spindle stop cock of approved quiality weight not less than 450 grams, 15 mm P.V.C alkathene pipe 45cm long with brass coupling at both ends and white/black plastic solid state seal and lead of Commander/Cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern wtc. with two coats of approved paint over a coat of red oxide primeing, all complete as per specification and direction of E/I.With 'P' Trap & 10 litre low level PVC cistern D.W. & S. Item No. 3.2.2(i)b |
| 37 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.D.W. & S. Item No. 3.2.5 |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.20mm dia D.S.R. Item No. 18.8 / 18.9 |
| 39 | 32 mm dia |
| 40 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 grams) with extra socket all complete as per specification and direction of E/I. D.W. & S. Item No. 3.1.5.1 |
| 41 | Providing and fixing brass / C.I. stop cock of approved quality all complete as per specification and direction of E/I. D.W. & S. Item No. 3.1.6(A)a |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DWSD M-079 |
| 43 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. D.S.R. Item No. 12.41.2 |
| 44 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. D.S.R. Item No. 12.42.3.2 Single tee with door - 110mm |
| 45 | Bend 87.5° - 110mm |
| 46 | Shoe (Plain) - 110mm |
| 47 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(5.3.8) |
| 48 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.(5.10.34) |
| 49 | E/W in excavation in foundation trenches in all kinds of soil -do- -do- all complete job as per specification and direction of E/I. BCD SOR 5.1.1 +5.1.2 |
| 50 | Providing sand filling in foundation trenches -do- -do- all complete job as per specification & direction of E/I.BCD SOR 5.1.10 |
| 51 | Providing Class 75B brick flat soling joint filled with local sand -do- -do- all complete as per specification and direction of E/I.BCD SOR 5.6.3 |
| 52 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) In Foundation BCD SOR 5.3.1.2 |
| 53 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). In Column BCD SOR5.3.10 |
| 54 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.BCD SOR 5.3.17.1 |
| 55 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. BCD SOR5.3.17.6 |
| 56 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) .BCD SOR5.3.9.1 |
| 57 | Providing 75B brick work in C.M. (1:6) in super structure -do- -do- all complete job as per specification and direction of E/I. BCD SOR 5.2.14 |
| 58 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).In Band at Lintel Level.BCD SOR 5.3.11 |
| 59 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.BCD SOR 5.3.17.5 |
| 60 | Providing 12mm thick Cement Plaster in CM (1:6) over walls -do- -do- all complete as per specification and direction of E/I .BCD SOR 5.7.3 |
| 61 | Providing TMT steel reinforcement 8mm dia rods to 10mm dia -do- -do- all complete as per specification and direction of E/I. 8mm dia. BCD SOR5.5.4 |
| 62 | 10mm dia -BCD SOR 5.5.5(a) |
| 63 | Earth work filling in foundation and plinth -do- -do- all complete job as per specification and direction of E/I.BCD SOR 5.1.7 |
| 64 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).D.S.R. Item No. 13.47.1 |
| 65 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6 mm M.S flats or 16mm M.S square bars fitted on 25 x 5 x 6mm M.S angle frame of size 60 x 60 x 6mm -do- -do- all complete job as per specification and direction of E/I.BCD SOR 5.5.3 |
| 66 | Providing two coats of painting with ready mixed paint over a coat of primer of red lead paint over steel surface -do- -do- all complete job. BCD SOR 5.8.41+5.8.43 |
| 67 | WGPVCPT - Wiring for light poit / fan point / exhaust fan point / call bell point with 1.5 sq. mm. F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet, suitable size M.S. box and earthing the point PVC insulated copper with 1.5 sq. m with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. Group -B SOR 1.12 |
| 68 | Wiring for sub main wiring with the following size of PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as required with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire SOR 1.7.1 |
| 69 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire SOR 1.7.2 |
| 70 | Supplying, fitting and fixing of following size of PVC conduit with accessories in surface etc. as required with taxes all complete as per approved design, drawing and electrical specification and direction of E/I. 25mm PVC conduit SOR 1.21.2 |
| 71 | 32mm PVC conduit SOR 1.21.3 |
| 72 | Supplying, fitting and fixing of metal box of 150mm x 150mm x 60mm size etc. as required with taxes all complete as per approved design, drawing and electrical specification and direction of E/I.75mm x 75mm x 50mm SOR 1.22.1 |
| 73 | 147mm x 93mm x 47mm SOR 1.22.3 |
| 74 | 121mm x 173mm x 48mm SOR 1.22.6 |
| 75 | Supplying, fitting and fixing of following size piano type switch and socket on the existing switch box/cover including taxes all complete as per approved design, drawing and electrical specification and direction of E/I.5/6 amp switch SOR 1.23.1 |
| 76 | 3 pin 5/6 amp socket outlet SOR 1.23.4 |
| 77 | Supplying and fixing brass batten/angle holder including connection etc. as required.SOR 1.34 |
| 78 | Supplying and fixing of 48\\" (1200mm) Ceiling Fan M-772 |
| 79 | Supplying and fixing of holder type LED - 9/10 watt M-855 |
| 80 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. SOR 1.25 |
| 81 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. SOR 1.26 |
| 82 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (78mm x 78mm x 45mm) - For Telephone & TV outlet SOR 1.27.1 |
| 83 | 4/5 Module (78mm x140mm x 50mm) SOR 1.27.2 |
| 84 | 8/9Module (78mmX230mmx60mm) SOR 1.27.4 |
| 85 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA \\"C\\" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required.6 / 32 Amp Single Pole SOR 2.12.1 |
| 86 | 6/32 Amp TPN SOR 2.12.8 |
| 87 | 40 Amp TPN SOR 2.12.9 |
| 88 | Supplying and fixing of following rating double pole ( Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB), having a sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc as required.63 Amps.SOR 2.16.3 |
| 89 | S.I.T.C of following rating surface mounted LED Tube Lighting Fitting Suitable for 230V 50 Hz, Single Phase Supply etc. complete as per specification and direction of E/I.10/12 W LED Tube Light. SOR 9.5.1 |
| 90 | 20/22 W LED Tube Light SOR 9.5.2 |
| 91 | Carriage of materials including loading, unloading, stacking -do- -do- all complete as per specification and direction of E/I. (i) Cement |
| 92 | (ii) Sand |
| 93 | (iii) Bricks |
| 94 | (iv) Steel |
| 95 | (v) Stone Chips |
| 96 | GST @ 18 % |
| 97 | Labour cess @ 1% Please Enable Macros to View BoQ information |
