|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 5 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm) |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 8 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 10 | 250x16 mm |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 12 | 200x10 mm |
| 13 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 14 | 125 mm |
| 15 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 16 | Twin rubber stopper |
| 17 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 18 | Profile B |
| 19 | Fixing with adjustable lugs with split end tail to each jamb |
| 20 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 21 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 22 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 23 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 24 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 25 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 26 | In cement mortar |
| 27 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 28 | Of area 3 sq. metres and below |
| 29 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 30 | For thickness of tiles 10 mm to 25 mm |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 32 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 33 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 34 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 35 | Kitchen sink with drain board |
| 36 | 510x1040 mm bowl depth 225 mm |
| 37 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 39 | Flexible pipe |
| 40 | 32 mm dia |
| 41 | Providing and fixing soil, waste and vent pipes : |
| 42 | 100 mm dia |
| 43 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 44 | 75 mm diameter : |
| 45 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 46 | Providing and fixing heel rest sanitary bend |
| 47 | 100 mm dia |
| 48 | Sand cast iron S&S as per IS - 3989 |
| 49 | Providing and fixing single equal plain junction of required degree : |
| 50 | 100x100x100 mm |
| 51 | Sand cast iron S&S as per IS - 3989 |
| 52 | 75x75x75 mm |
| 53 | Sand cast iron S&S as per IS - 3989 |
| 54 | Providing and fixing collar: |
| 55 | 100 mm |
| 56 | Sand cast iron S&S as per IS - 3989 |
| 57 | 75 mm |
| 58 | Sand cast iron S&S as per IS - 3989 |
| 59 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 60 | 100 mm |
| 61 | 75 mm |
| 62 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 63 | 100 mm inlet and 75 mm outlet |
| 64 | Sand cast iron S&S as per IS - 3989 |
| 65 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 66 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 67 | Internal work - Exposed on wall |
| 68 | 25 mm dia nominal bore |
| 69 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 70 | 15 mm dia nominal bore |
| 71 | 20 mm dia nominal bore |
| 72 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 73 | 20 mm nominal bore |
| 74 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 75 | 45 cm length |
| 76 | 15 mm nominal bore |
| 77 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 78 | 15 mm nominal bore |
| 79 | 20 mm nominal bore |
| 80 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 81 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 82 | 15 mm nominal bore |
| 83 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 84 | 15 mm nominal bore |
| 85 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 86 | 15mm nominal bore |
| 87 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 88 | Providing and Fixing of 25 Ltr Capacity Hot Water Geyser including fixing at site of approved make complete in all respect. (As desired by EIC) |
| 89 | Providing and fixing of C.P. brass Toilet Paper Holder of approved make complete in all respect. (As decided by the EIC) |
| 90 | Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make complete in all respect at site. (As decided by the EIC) |
| 91 | Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC. |
| 92 | Providing and fixing C.P. Brass Towel Ring of approved make complete in all respect. (As decided by the EIC) |
| 93 | Dismantling of G.I. Pipes upto 50 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement. |
| 94 | Dismantling of C.I Pipes upto 150 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement. |
| 95 | Dismantling of Ceramic tiles or Vitrified and Plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of EIC. |
| 96 | Construction of curb consisting of cement concrete 1:2:4 with PVC Pipe 4\\"6 Kg pressure per cm2 upto average length of 1' including cost of CP hinged grating and cost of sand, bajri etc. complete in al respect. Please Enable Macros to View BoQ information |
