|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in DSR 6.4 |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.4.2 |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: DSR 9.21 |
| 5 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1 |
| 6 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete DSR 9.48 |
| 7 | Fixed to openings /wooden frames with rawl plugs screws etc. DSR 9.48.2 |
| 8 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : (copper oxidized as per IS: 1378) DSR 9.59 |
| 9 | 150 mm DSR 9.59.1 |
| 10 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) DSR 9.62 |
| 11 | 300x16 mm DSR 9.62.1 |
| 12 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378) DSR 9.66 |
| 13 | 125 mm DSR 9.66.1 |
| 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.97 |
| 15 | 250x10 mm DSR 9.97.2 |
| 16 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : DSR 10.30 |
| 17 | 4.0 mm thick glass panes (weights not less than 10 kg/ sqm) DSR 10.30.1 |
| 18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. DSR 11.3 |
| 19 | 40 mm thick with 20 mm nominal size stone aggregate DSR 11.3.1 |
| 20 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. DSR 11.13 |
| 21 | 40 mm wide and 4 mm thick DSR 11.13.1 |
| 22 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In DSR 12.21 |
| 23 | 75x75 mm deep chase DSR 12.21.1 |
| 24 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. DSR 12.22 |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. DSR 12.41 |
| 26 | 110 mm diameter DSR 12.41.2 |
| 27 | 12 mm cement plaster of mix : DSR 13.4 |
| 28 | 1:6 (1 cement: 6 coarse sand) DSR 13.4.2 |
| 29 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in- Charge. DSR 14.13 |
| 30 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective ofduration of scaffolding. DSR 14.72 |
| 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.6 |
| 32 | Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4\\" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS |
| 33 | Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS |
| 34 | Providing and fixing Golden Champ chawkhats (kiln seasoned) including cost of straps iron holds fast hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chawkhats. Rate includes the cost of dismantling of all damages chawkhats and making and good the damaged to walls plaster and floors as required including disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats syn, paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-charge. (Size: 4 ½”x 2 ¼ ” ) NS |
| 35 | Providing and fixing 19mm thick (ISI marked) Commericial Board shutter in existing cup board, lipped with hard wood lipping of 19mm x 6mm on exposed edges including nail, screw and fevicol etc. the rate also includes 2nos 4\\" MS handle , magnatic catcher, Piano hinges or cost of two coats of special quality over one coat of wooden primer after preparation of ply wood surfaces fixed in position complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 36 | Providing and fixing 19mm thick (ISI marked) Commericial Board shelf in existing cup board, lipped with hard wood lipping of 19mm x 6mm on exposed edges including nail, screw and fevicol etc. the rate also included the cost of two coats of special quality over one coat of wooden primer after preparation of ply wood surfaces fixed in position complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 37 | Providing and fixing Golden Champ chawkhats (kiln seasoned) including cost of straps iron holds fast hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chawkhats. Rate includes the cost of dismantling of all damages chawkhats and making and good the damaged to walls plaster and floors as required including disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats syn, paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-charge. Size:2 ½” x 2 ½” NS |
| 38 | Providing and fixing 35mm thick Golden Champ wire gauge door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2\\" x 3/4” hollock wood beading 3nos 5” Nos hinges aluminium fitting and two nos handles 5” and 1 no tower bolt 8”, 6” and double rubber aluminium door stopper, Single action door spring. Complete fixed in position including the cost of two coats of special quality over one coat of wood primer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS |
| 39 | Providing and fixing over head wooden storage cabinet under work top 2'-0\\" high & 2'-0'' deep consisting of 19mm thick commercial board ISI marked with 6mm thick commmercial ply on back side including 1 Nos. Horizontal shelf ( as per sketch) . The front side of the cabinet shall be provided with 1mm thick laminate of approved shade and inner surface shall be provided with 0.70mm thick laminate including 20mmx 6mm thick second class teak wood lipping on exposed edges of the board. The rate further include the cost of piano type hinges , S.S handles 4\\"size, aluminium hasp & staple, magnatic catcher, stainless steel adjusters / lifters, fevicol, nails , screws complete fixed in position tothe entire satisfaction in the Engineer-in-charge. ( Front elevation area shall be measured for payment). NS |
| 40 | Providing and Fixing of Kitchen Cabinet below working shelves consisting of chowkhats frame of golden champ wood of 2\\" section with one additional member with suitable rebate of 1\\" 1/2\\" on outer side for shutter. The shutters are to be provided with 19mm thick commercial board with both side sunmica ie 0.7 mm thick on inner & 1mm thick outer side with hard wood lipping of size 18mm x 6mm all around and fixed with chowkhat frame with piano hinges and screws etc. and finished with handle and magnetic catcher. The complete frame is to be fixed with fastners. etc complete fixed in position to the entire satisfaction of Engineer in charge. NS |
| 41 | Repair of detiorarted RCC Surface having exposed rusted consisting of following operation a) Chipping of concrete surfaced 25mm thick average depth afterwards removal of loose concrete and exposing the steel bars. Cleaning the surface properly to remove dust particles and rust from the steel bars. Complete in all respect ot the entire satisfaction of Engineer-in-charge. b) Moistening the surface properly and applying arcylic polymer (acrocrete/pidilite/master crete) coating mixing with cement for proper bonding of old and new concrete in two coats @ 0.20 kg Polymer per 1 Kg cement c)providing and fixing Fibre mesh with steel reinforcement by using binding wire and nails. Complete as per directions and approval of Engineer-incharge. d) Placing of cement concrete 1:1: 1/2:3 having thicknesss (3/4\\" to 1.1/4\\") mixed with acrylic polymer admixture @ 1 kg per bag of cement average thickness 1.. Complete in all respect to the entire satisfaction of engineer-in-charge. NS |
| 42 | Providing and laying vitrified floor tiles ( Single Charge) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm NS |
| 43 | Providing and laying Anti Skid ceramic floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality of approved make, in all colours such as white, lvory , grey, Fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., complete. NS |
| 44 | Providing and fixing 18 mm ( Green marble ) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm (Based On DSR 8.2.2.2) NS Please Enable Macros to View BoQ information |
