|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 2 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.4 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 4 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 |
| 7 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.26 |
| 8 | From ground level upto plinth level DSR 6.26.1 |
| 9 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83 |
| 10 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : DSR 9.96 |
| 11 | 300x16 mm DSR 9.96.1 |
| 12 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.97 |
| 13 | 200x10 mm DSR 9.97.3 |
| 14 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. DSR 9.101 |
| 15 | Twin rubber stopper DSR 9.101.2 |
| 16 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14 |
| 17 | Profile C DSR 10.14.2 |
| 18 | Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.2.1 |
| 19 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : DSR 10.30 |
| 20 | 4.0 mm thick glass panes DSR 10.30.1 |
| 21 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. DSR 11.41A |
| 22 | Double charge vitrified tile polished finish of size DSR 11.41A.1 |
| 23 | Size of Tile 600 x 600 mm DSR 11.41A.1.1 |
| 24 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. DSR 12.43 |
| 25 | 110 mm DSR 12.43.2 |
| 26 | 12 mm cement plaster of mix : DSR 13.4 |
| 27 | 1:6 (1 cement: 6 coarse sand) DSR 13.4.2 |
| 28 | Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): DSR 13.32 |
| 29 | Flush/ Ruled/ Struck or weathered pointing DSR 13.32.1 |
| 30 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. DSR 14.13 |
| 31 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. DSR 14.72 |
| 32 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 15.7 |
| 33 | In cement mortar DSR 15.7.4 |
| 34 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved DSR 15.60 |
| 35 | Fencing with angle iron post placed at required distance last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two Ms angle fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire NS |
| 36 | Providing and fixing 35mm thick Golden Champ wire gauge door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2\\" x 3/4” hollock wood beading 3nos 5” Nos hinges aluminium fitting and two nos handles 5” and 1 no tower bolt 8”, 6” and double rubber aluminium door stopper, Single action door spring. Complete fixed in position including the cost of two coats of special quality over one coat of wood primer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS |
| 37 | Providing and fixing 35 mm thick Golden Champ wire gauge window shutter with style and 75mm thick wide rails and 12 x 22 gauge wire mesh fixed with 1/2'' x 3/4'' corner beading and including the 2 Nos. of 4'' iron hinges ISI marked aluminium, tower bolt handle etc. The rate also including two coats of special qualtiy paint over one coat of primer complete in complete in all respect and to the entire satisfaction of Engineer-in-charge. NS |
| 38 | Providing and fixing 19mm thick (ISI) Commericial Board shutter in existing cup board, lipped with hard wood lipping of 19mm x 6mm on exposed edges including nail, screw and fevicol etc. the rate also included the cost of two coats of special quality over one coat of wooden primer after preparation of ply wood surfaces fixed in position complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 39 | Providing and fixing 19mm thick (ISI marked) Commericial Board shelf in existing cup board, lipped with hard wood lipping of 19mm x 6mm on exposed edges including nail, screw and fevicol etc. the rate also included the cost of two coats of special quality over one coat of wooden primer after preparation of ply wood surfaces fixed in position complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 40 | Providing and fixing 35 mm thick Golden Champ (kiln seasones) glazed window shutter with 75mm thick wide styles and top and bottom rails. the rate includes the cost of 4mm glass panes fixed with 3/4'' x 3/4'' Hollock wood corner beading 2 Nos. Aluminium belt and Aluminium D-type handle 4\\" size the window shutter to be painted with two coats of special quality paint over one coat of primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS |
| 41 | Providing and fixing Aluminium American Handles ISI Marked anodised canodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade , with nuts 8 screws , with nuts 8 scrtews etc. complete. size 200mm x 20mm NS |
| 42 | Repair of detiorarted RCC Surface having exposed rusted reinforcement consisting of following operation a) Chipping of concrete surfaced 25mm thick average depth afterwards removal of loose concrete and exposing the steel bars. Cleaning the surface properly to remove dust particles and rust from the steel bars. Complete in all respect ot the entire satisfaction of Engineer-in-charge. b) Moistening the surface properly and applying arcylic polymer (acrocrete/pidilite/master crete) coating mixing with cement for proper bonding of old and new concrete in two coats @ 0.20 kg Polymer per 1 Kg cement c)providing and fixing MS wire mesh by using binding wire and nails. Complete as per directions and approval of Engineer-incharge. d) Placing of cement concrete 1:1.5:3 having thicknesss (3/4\\" to 1.1/4\\") mixed with acrylic polymer admixture @ 1 kg per bag of cement . Complete in all respect to the entire satisfaction of engineer-in-charge. NS |
| 43 | Supplying of new FPS Brick tiles class designation 100 NS |
| 44 | Providing and fixing 150 mm internal dia ISI mark P.V.C pipes as rain water pipes on walls of 10kg per sqm pressure with bend ,elbow and clamps complete in all respect and entire satisfaction of Engineer-in-charge NS |
| 45 | Providing and fixing 35mm thick Golden Champ (kiln seasoned) Panelled Door consisting of vertical style and side rails 100mm, lock rail 150mm, bottom rail 200mm with 12mm thick water resistance shuttering (ISI marked) with necessary iron hinges 5” 3 No, all necessary Aluminium T. Bolt 8” 1 No, 6” 1 No, handle 5” 2 No, 1 No., Sliding bolt, fitting and painting two coats over one coat of primer after preparation of surface (special quality) Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS |
| 46 | Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of iron hinges, all necessary Aluminium fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.NS |
| 47 | Recovery of Brick Bats Rs 650/ cum |
| 48 | recovery of Bricks Rs.5.5/Nos Please Enable Macros to View BoQ information |
