|
| 1 | CIVIL WORKS |
| 2 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 3 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : a) All Kinds of Soil |
| 4 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a. All kind of soil |
| 5 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 6 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 7 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand) in foundation upto plinth level |
| 8 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand) in foundation upto plinth level Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 9 | Brick work using common burnt building bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 40 kg / cm2 (wire cut bricks) |
| 10 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level |
| 11 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:b. In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.. |
| 12 | Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc. |
| 13 | Providing and laying in position ready mixed concrete (RMC) manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level |
| 14 | Centering & shuttering including Strutting, Propping & removal of forms for : i) Foundation Footings Bases of Column |
| 15 | Centering & shuttering including Strutting, Propping & removal of forms for :iii) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 16 | Centering & shuttering including Strutting, Propping & removal of forms for :iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 17 | Centering & shuttering including Strutting, Propping & removal of forms for : xiii. Suspended floors, roofs landings, shelves & their supports |
| 18 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded platesi. Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only |
| 19 | Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured) |
| 20 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 21 | Providing & fixing Asphalt shingles in approved colour and pattern for roof and ridge over 10mm thk bison boardwith APP waterproofing membrane including all fixing arrangements such as screwing etc complete and ensuring water tightening. |
| 22 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 23 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 24 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm a. Jet Black |
| 25 | Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks ( C. C. paver blocks) of M35 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. c. 60mm thick with Yellow/ Orange/ Earth colour (M35 grade) |
| 26 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 27 | 18mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand)1 meter long, 1 cm wide |
| 28 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 29 | Finishing wall with superior quality waterproofing cement paint (super snow hem or equivalent) of required shade on new work (three or more coats) to give an even shade. |
| 30 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 31 | Extra for plastering done on moldings, cornices, or arch it raves including neat finish to line and level. |
| 32 | Extra for providing and mixing water proofing material proportion recommended by the manufacturers. |
| 33 | Forming & Finishing the 20 mm groove in plastered surface & repair the edges as per specifications and directions of the Engineer In Charge. |
| 34 | Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects.a. Theming work for main entrance gate in FRP as per tender drawing |
| 35 | Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects.b. Theming work for Shrikrishna Big Mural in FRP as per tender drawing |
| 36 | Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects.c. Theming work for Shrikrishna Small Mural in FRP as per tender drawing |
| 37 | Providing & fixing Below Mentioned Items made in fiber (FRP/GRP/ ANY OTHER MATERIAL SPECIFIED BY VENDOR) alongwith fabricating a rigid skeletal frame work by welding steel bars/weld mesh as per the desired size, shape and profile of the finished structure .Finish should be simillar to the photofeatures approved by the Architect. Rate should be inclusive of Scaffolding , reinforcement welding, framework as per structural design. Work should be as per detail design & drawing and satisfactory of the Architects.d. Theming work for Kalash in FRP as per tender drawing |
| 38 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:a. 100 mm dia |
| 39 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:b. 75 mm dia. |
| 40 | Providing and fixing ball valve (brass) of approved quality :3. 25mm nominal bore |
| 41 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 42 | Supplying and fixing Mild Steel Grating fabricated from MS Flat and MS Tube directed by Engineer-in-charge. |
| 43 | Providing and fixing PVC SWR pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion. b.Single socketed pipe 110 mm dia |
| 44 | Supply & Installation of Water Body unit including FRP petals, Plumbing,Filtration System & Electrical etc complete. |
| 45 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 46 | Carraigeway and Disposal of unserviceable building material, Laterite stone, demolished concrete, excavated earth upto a lead of 15 kms from the site of execution by means of tipper truck including loading, unloading and dumping/stacking as directed by Engineer -in-charge. |
| 47 | Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.a. Size 30 cm L x 50 cm H x 15 cm T |
| 48 | Providing and Installating of Synthetic wood and G.I with powder coatingWITH BACKRESTLENGTH X HEIGHT X WIDTH 60'' X 38'' X 20'' POWDER COATED FINISHincluding foundation, holding down bolts, grouting etc complete as directed by Engineer-in-charge.Benches |
| 49 | Providing and fixing 6mt high Deep stambh with Base as per approved design with Exposed decorative laterite masonry using Hard laterite stone laid in cement mortar 1:4 (1 cement : 4 coarse sand), including, Carving, Moulding, Scaffolding, Curing, Varnishing to give high gloss finish etc. complete as specified and as directed by the Engineer at all levels. (Excluding electrical works and R.C.C supports) |
| 50 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationa. Bakul |
| 51 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationb.Bogunvella |
| 52 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationc.Ixora |
| 53 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationd.tmc mini |
| 54 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantatione.alamanda |
| 55 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationf.foxtailpalm |
| 56 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationg.foxtailpalm |
| 57 | Supply and plantation of following types of healthy, decorative, flowering plants, trees, shrubs , hedges, land covers etc. as per respective specifications mentioned, Including their maintenance up to 12 months as per specification and direction of the consultants and also replacing with similar plants in case of death of any plants. The plant will be selected and approved by consultants before plantationh.foxtailpalm |
| 58 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment). |
| 59 | Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately). |
| 60 | Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding withwater and leveling (cost of supplying earth and sludge of manure and mixing excluded). |
| 61 | Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm. as per MORTH Specification 307 |
| 62 | Maintenance of lawns or Turfing of slopes(rough grassing) for a period of one year including watering etc. as per MORTH Specification 307 |
| 63 | ELECTRICAL WORKS |
| 64 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm |
| 65 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm |
| 66 | Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 2) 3 1/2 Core 35 sq.mm |
| 67 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (4) 4 x 10 Sq. mm.. |
| 68 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(1) 3 x 1.5/2.5 Sq. mm. |
| 69 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(2) 3 1/2 x 35 Sq. mm. |
| 70 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick, protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 71 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run (the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata |
| 72 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required |
| 73 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement(b) In rocky strata |
| 74 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). b)In rocky strata |
| 75 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required |
| 76 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required |
| 77 | Supply, installation, testing and comissioning of Architectural designed Pole of 3mtr Height Post top pole made of galvanised iron sections of 114mm & 60mm dia. This architecturally designed pole is structurally sound. Windspeed considered in design 50m/s, IS875:PART 3:1987, Material for tubes steel of grade YST210. Material for base plate steel of grade E250 to IS2062; 2011. The pole will be provided with an inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the inbuilt box should have a flush door of suitable size with Allenkey locking on bothside. The Decorative pole will be mounted on a square base plate of size 200X200 mm having 10mm thickness. The base plate shall have 4 hole suitable for M16/450 foundation bolts ensuring firm grouting in the specially designed RCC foundation. The galvanized zinc coat should not be less than 65+/ 10microns. The Galvanised pole should be painted in 3layer coating (Coating thickness should not be than 80microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint with overall 100 +/- 10 microns. Make : Havels, Raytek, suncity, lalumirie, dwarka casting subjected to approval of sample by engineer in charge Exclusive of MCB and 3c 2.5 sq mm wire from MCB to Fitting Make: Hakke/Transrail/RR Ispat |
| 78 | Supply ,Installation Testing , Commissioning of 40W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 40W LED. Fitting shall be Post top mounting type fixture. System Wattage: 40W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply.● light Source : Bridegelux, LED Lumens:6000lm, CRI(Ra):>80, LED Colour Temperature: 4000K, Life Span:>59,000 Hours,, ● Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, ●Driver Power Factor:>0.95, THD:<7.8%,Surge Protection: 4KV, Efficiency:>87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA make Philips. LED's of Osram & Driver to be of make Philips. LM79-2019 report to be provided. Make : Havels, Raytek, suncity, lalumirie, dwarka casting subjected to approval of sample by engineer in charge and with other required accesories. |
| 79 | Supply ,Installation Testing , Commissioning of 30W compound hall post top lantern lamp decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 30W LED. Fitting shall be Post top mounting type fixture. System Wattage: 30W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply.● light Source : Bridegelux, LED Lumens:6000lm, CRI(Ra):>80, LED Colour Temperature: 4000K, Life Span:>59,000 Hours,, ● Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, ●Driver Power Factor:>0.95, THD:<7.8%,Surge Protection: 4KV, Efficiency:>87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA make Philips. LED's of Osram & Driver to be of make Philips. LM79-2019 report to be provided. Make : Havels, Raytek, suncity, lalumirie subjected to approval of sample by engineer in charge and with other required accesories. |
| 80 | Supply, fixing, testing and commissioning of 120W LED street light luminiare IP 66 optic compartment, pressure die cast aluminium housing, control gear compartment, frame with toughened glass with luminious efficacy >115 lumen/W at ta 25 deg c.in built surge protection upto 10kV as required and directed by engineer incharge. make Bajaj, Havells,wipro,Transrail, Panasonic, phillips and Legero. Complete as required and directed by Engineer-Incharge. Make: Havells, Crompton, Wipro, phillps, Jaguar, Leksa |
| 81 | Supply, installation, testing and commissioning of 25W linear light 1meter long Incharge. make : Havels, Raytek, suncity, lalumirie, subjected to approval of sample by engineer in charge and with other required accesories. |
| 82 | Supply, installation, testing and commissioning of 20W Warm white Light Incharge. make : Havels, Raytek, suncity, lalumirie, subjected to approval of sample by engineer in charge and with other required accesories. |
| 83 | Supply, fixing, testing and commissioning of 120W LED flood light luminiare IP 66 optic compartment, pressure die cast aluminium housing, control gear compartment, frame with toughened glass with luminious efficacy >115 lumen/W at ta 25 deg c.in built surge protection upto 10kV as required and directed by engineer incharge. make Bajaj, Havells,wipro,Transrail, Panasonic, phillips and Legero. Complete as required and directed by Engineer-Incharge. Make: Havells, Crompton, Wipro, phillps, Jaguar, Leksa |
| 84 | Supply, installation, testing and commissioning of 4 arrm bracket suitable for mounting 4 nos flood light on 8 mtr octagonal GED poles Complete as required and directed by Engineer-Incharge |
| 85 | Supply, installation, testing and commissioning of Single arrm bracket suitable for mounting flood light on 8 mtr octagonal GED poles Complete as required and directed by Engineer-Incharge |
| 86 | Supply, installation , testing and commissioning of 10W decorative inground light Luminaire with wall mounting , 3000K , IP66 for protection against rain and dust, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. (Makes: Havells/ Reytek/Wipro/ jaquar/Leksa/ Crompton) |
| 87 | Supply installation testing and commissioning of 50 W Flood Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V. of reputed make of K-Lite, Dwarka, Reyteck, Suncity subjected to approval of sample by engineer in charge and inclusing mounting arm or bracket as required on pole/ surface. Complete as required and directed by Engineer Incharge. (Makes: Havells/ Reytek/Wipro/jaquar/Leksa/ Crompton)) |
| 88 | Supply installation testing and commissioning of 30 W Flood Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V. of reputed make of K-Lite, Dwarka, Reyteck, Suncity subjected to approval of sample by engineer in charge and inclusing mounting arm or bracket as required on pole/ surface. Complete as required and directed by Engineer Incharge. (Makes: Havells/ Reytek/Wipro/jaquar/Leksa/ Crompton)) |
| 89 | Supply and erection of 8 Mtrs Octoganal Pappeared pole made out of 4 m.m. thick plate and having the following provisions and of approved make:- a) 4 Nos of Jtype M20X750 MM long (UNF thread - 100mm, foundation bolts of grade EN. 8.b) Base plate steel of size 225x225 mm, thickness 16 mm. c) 50 mm dia HDPE pipe, PN-4, P-63 Grade 2.65 mm for cable entry and exit (2 run) |
| 90 | Supply, installation , testing and commissioning of 8-10W decorative IP 66 LED Spike light Luminaire with wall mounting , 3000K , IP66 for protection against rain and dust, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. (Makes: Havells/ Reytek/Wipro/ jaquar/Leksa/ Crompton) |
| 91 | Supply, installation , testing and commissioning of LED surface warm lights of 3-5W, 230V Intergral type with required driver and all the required accessories of Legro, Wipro, crompton, Bajaj, havels make or equivalet approved by Engineer - in - Charge complete as required. s. (Makes: Havells/ Reytek/Wipro/ jaquar/Leksa/ Crompton) |
| 92 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.(c) Group C -- with Cat A Modular Accessories |
| 93 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. |
| 94 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 95 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(c) 12 way single door Cat A |
| 96 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A |
| 97 | Supplying and fixing SP blanking plate in the existing MCB DB complete as required |
| 98 | Supply, installation , testing and commissioning of Terminal Boxes size 130 x 130 x 77 mm with 9 Nos 4 sq.mm Terminals. Box shall be similar to Hensal make Cat. No. DK 0606 g, IP 65 complete as required and directed by Engineer Incharge Please Enable Macros to View BoQ information |
