|
| 1 | Demolition of brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed. |
| 2 | M&L for brick work with flyash modular size, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 4 | M&L for 15 mm thick on fair faces of brick masonry or concrete surfaces in cement mortar 1:4, comprising 10 mm thick first coat and 5 mm thick second coat over the first coat, the second coat mixed with approved waterproofing compound in the proportion recommended by the manufacturer, finished fair, smooth and even without the use of extra cement complete in all respects as specified and directed. |
| 5 | Supply only Integral water proofing compound complete all as specified and directed. |
| 6 | M&L for 15 mm thick rendering in CM 1:6 on brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | S&F in repairs rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed. |
| 8 | S&F in repairs GI water tubing, medium grade, 15 mm dia bore, including all fittings such as bends, elbows, sockets, reducers, tees, unions, clamps, jointing, fixing and testing, fixed to walls/ceilings or laid in floors, complete all as specified and directed. |
| 9 | S&F in repairs GI water tubing, medium grade, 20 mm dia bore, including all fittings such as bends, elbows, sockets, reducers, tees, unions, clamps, jointing, fixing and testing, fixed to walls/ceilings or laid in floors, complete all as specified and directed. |
| 10 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. |
| 11 | M&L for non skid/mat finish joint free ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 12 | M&L for glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L for vitrified cerameic tiles 9 to 10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:4 complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 15 | M&L for Granite 18 to 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over and including 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE complete all as specified and directed. |
| 16 | Rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed. |
| 17 | M&L for 22 to 25 mm thick machine cut Kota stone slabs in flooring or treads of steps (single piece per tread), laid over and including 15 mm thick cement mortar (1:6) screed bed, jointed with grey cement slurry mixed with pigment to match the shade of the stone, including cutting, dressing, rubbing, polishing, and finishing the surface smooth, even and true to line and level complete all as specified and directed by Engr-in-Charge.Note: The size of Kota stone slabs shall not be less than 550 mm × 550 mm (cut size), except where smaller pieces are unavoidable due to the remaining balance portion at edges, corners, or other locations. |
| 18 | M&L for 22 to 25 mm thick machine-cut Kota stone slabs in skirting, dado, or other vertical surfaces, over and including 10 mm thick cement mortar (1:4) rendering/backing coat, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone, including cutting, dressing, grinding, rubbing, polishing, and finishing the surface smooth, even and true to line and level complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for cutting/grinding and polishing existing Kota stone flooring to obtain a smooth, even and uniform finish, including cleaning the surface, removal of minor undulations, filling and repairing of cracks, chips, joints or damaged portions with matching materials wherever required, and final polishing complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for factory made designer precast concrete interlocking paver blocks of any approved shape and size, conforming to IS 15658:2006, 60 mm thick, M-35 grade, laid over and including 25 mm thick compacted sand cushion bed complete all as specified and directed. |
| 21 | Taking down chowkhats/frames not exceeding 1.50 sqm each with shutter (without taking off shutter frome the frame), including careful dismantling, removing holdfasts/fastenings and making good all disturbed masonry, plaster, concrete and adjoining surfaces to match the existing finish complete all as specified and directed. |
| 22 | Taking down chowkhats/frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutter (without taking off shutter frome the frame), including careful dismantling, removing holdfasts/fastenings and making good all disturbed masonry, plaster, concrete and adjoining surfaces to match the existing finish complete all as specified and directed. |
| 23 | Excavation in trenches in avg soil not exceeding 1.50m wide and not exceeding 1.m in depth for sewage line, manhole,drain etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed. |
| 24 | Returning, filling in Soft/Loose soil including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed. |
| 25 | Removing excavated material to a distance n exc 50m and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and directed. |
| 26 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 27 | S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete all as specified and directed. |
| 28 | S&F 105 x 60 mm size Pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate,hold fast include etc., complete all as specified and directed. |
| 29 | S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 30 | M&L for PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work complete all as specified and as directed. |
| 31 | S&F 2nd class hard wood 35 mm thick Plain, framed panelled factory made shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and as directed. |
| 32 | S&F 2nd class hard wood 35 mm thick Glazed and skeleton factory made shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 33 | S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 34 | S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge. Make : SYNTEX/RAJSHREE Plastic wood Forex, Indore / make as per Particular Specification (list of Make) as approved by GE. |
| 35 | S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised stainless steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 36 | S&F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 37 | S&F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 38 | S&F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specified and directed. |
| 39 | S&F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. |
| 40 | S&F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed. |
| 41 | S&F in repairs powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 42 | S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iv) 4 mm thick glass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(Min)(vii) Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos. |
| 43 | S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 44 | S&F mild steel framed work such as grills , gratings,angle door frame etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 45 | M&L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 46 | M&L for preparation of new wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed. |
| 47 | Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads complete all as specified and directed. |
| 48 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specifed and directed. |
| 49 | S&F 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specifed and directed. |
| 50 | S&F in repairs galvnised mild steel wire cloth, 0.56mm conforming to IS nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 51 | S&F stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 52 | M&L for rendering 5 mm thick in cement mortar 1:3 to soffits of ceilings, RCC chajjas, fascias and other roof projections, finished fair, smooth and even, including preparation of surfaces complete all as specified and directed. |
| 53 | M&L for preparation of new plastered surfaces and applying two coats of approved cement based paint on walls, including wetting of surfaces, surface preparation, mixing and application of paint strictly in accordance with the manufacturer's instructions and finishing the surface uniform in colour complete all as specified and as directed. |
| 54 | M&L for preparation of old surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 55 | Complete removal of existing treatment from wall surfaces by scraping, brushing, washing and cleaning, including removal of all loose, peeling or defective paint, whitewash, distemper or similar finishes, and preparing the surface ready to receive new treatment complete all as specified and directed. |
| 56 | M&L for applying wall care waterproof putty of approved make, 2 mm average thickness, on old or new wall surfaces, including preparation of the surface, filling of minor undulations, mixing and application of putty strictly in accordance with the manufacturer's instructions, and finishing the surface smooth, even and ready to receive paint complete all as specified and directed. |
| 57 | M&L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall complete all as specified and directed. |
| 58 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level complete all as specified and directed. |
| 59 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand and finished even and smooth with extra cement and laid in alternate bays complete all as specified and directed. |
| 60 | S&F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed. Make :- Nirali / make as per Particular Specification (list of Make) as approved by GE. |
| 61 | S&F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc complete all as specified and directed. |
| 62 | S&F in repairs 15 mm dia bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete but fency type complete all as specified and directed. |
| 63 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including white seat cover etc. complete all as specified and directed. |
| 64 | S&F in repairs 10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. |
| 65 | S&F in repairs PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete all as specified and directed. |
| 66 | S&F in repairs 600mmx450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 67 | S&F in repairs brass chromium plated stop cock/ angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 68 | S&F in repairs brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. |
| 69 | S&F in repairs over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed. |
| 70 | S&F in repairs 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed. |
| 71 | S&F in repairs 15mm dia Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 72 | S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed. |
| 73 | S&F harrison rail/curtain rod 20mm, mild steel chromium plated with fixing bracket, stops and complete fitment complete all as specified and directed. |
| 74 | S&F in repairs corner shelf of 300 mm size with ABS brackets complete all as specified and directed. |
| 75 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. |
| 76 | S&F suspended false ceiling in true horizontal level comprising hot dip galvanised steel grid system with exposed pre-painted/pre-coated capping, consisting of main tees of size 24 mm × 38 mm and 0.25 mm thick spaced at maximum 1200 mm centres, rotary-stitched cross tees of size 24 mm × 38 mm and 0.25 mm thick at 600 mm centres, sub-cross tees of size 24 mm × 38 mm and 0.25 mm thick at 1200 mm centres, and wall angles of size 19 mm × 19 mm and 0.35 mm thick securely fixed to the perimeter walls. The grid framework shall be suspended from the structural soffit at maximum 1200 mm centres in both directions using 2.0 mm dia pre-straightened GI hanger wires, complete with dash fasteners, anchors, clips, cleats and all other necessary fixing accessories. Providing and laying square edge Non asbestos fibre cement ceiling tiles of approved make, size 600 mm × 600 mm × 6 mm thick, of approved texture and finish, accurately placed in the exposed grid system, including cutting, trimming and fitting around light fittings, diffusers, beams, columns, access panels, service ducts and other obstructions, and making good all edges as required. The work shall include all materials, labour, lifting, scaffolding, tools and plants, and shall be completed true to line, level and pattern, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 77 | S&F in repairs Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed. |
| 78 | S&F in repairs PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed. |
| 79 | S&F in repairs 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed. |
| 80 | S&F in repairs 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed. |
| 81 | S&F in repairs 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 82 | S&F in repairs 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 83 | S&F in repairs 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 84 | S&F in repairs 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 85 | S&F in repairs 110 mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed. |
| 86 | S&F in repairs 75mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed. |
| 87 | S&F in repairs 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed. |
| 88 | Demolition of reinforced cement concrete of any description for manhole cover, slab of septic tank & soak well etc complete all as specified and directed. |
| 89 | M&L for providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well,drain cover etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and directed. |
| 90 | S&F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, benty shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild stee wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 91 | S&F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site complete all as specified and directed. Please Enable Macros to View BoQ information |
| 92 | S&F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site complete all as specified and directed. Please Enable Macros to View BoQ information |
