|
| 1 | Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed. |
| 2 | Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed. |
| 3 | Taking down shutters of any description n exc 1sqm but n exc 2 sqm each, complete all as specified and directed. |
| 4 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and directed. |
| 5 | S & F Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (sectio No 20737) and for wire guage shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces, complete all as specified and directed. |
| 6 | S & F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc, complete all as specified and directed. |
| 7 | S&F Powder coated Anodised aluminium frame for partations of single groove section size 63.40 x 38.10 x x1.50 mm thick and double groove section size 63.50 x 38.10 x x1.53mm thick including fixing of 5.5 mm thick tinted glass or Aluminium panel sheet with rubber packing complete with one or more rebates including joining cleat, including taking down old partition with glass, complete all as specified and directed. |
| 8 | S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber framing is moulded on solid (for each side) or of veenerred particles boards medium density, wood particle board with commercial face veereers, complete all as specified and directed. |
| 9 | M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 10 | S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 11 | S&F factory made solid moulded PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC \\"C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing, complete all as specified and directed. |
| 12 | S & F 100mm long butt hings heavy weight cold rolled mild steel & fixed to chowkats, complete all as specified and directed. |
| 13 | S & F 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed. |
| 14 | S & F 150mm long Brass handles, cast type, polished bright, complete all as specified and directed. |
| 15 | S & F 300mm Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed. |
| 16 | S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No 1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed. |
| 17 | S&F Aluminium body door cill upto 1mtr length at bottom part of door to stop entry of insect inside the room complete all as specified and as directed. |
| 18 | S & F 150mm floor door stopper of aluminium alloy body and tounge,anodised,with hard drawn steel spring ,fixed in floor, complete as all as specified and directed. |
| 19 | S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod/curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative nobs, complete all as specified and directed. |
| 20 | Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/ blankets any thickness, including cover fillets, complete all as specified and directed. |
| 21 | M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed, complete all as specified and directed. |
| 22 | M&L for Khatamband pattern false ceiling ,design as approved by GE with ornamental wood work made out of stainless including 12mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats ) and fixed, complete all as specified and directed. |
| 23 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on frame made with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall with bright brass screws to make PVC frame, complete all as specified and as directed. |
| 24 | S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers on faces fixed in ceilling with screws to timber frame work, complete all as specified and directed. |
| 25 | S&F wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc., complete all as specified and directed. |
| 26 | Dismantling timber scantling 40 sq cm & over in section, any position in unframed work, complete all as specified and directed. |
| 27 | M&L 2nd class soft wood (kail) as in scantling clean sawn, complete incl dismantling timber scantling 40 sq cm & over in section, any position any type work, complete all as specified and directed. |
| 28 | Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering, complete all as specified and directed. |
| 29 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 30 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 31 | Dismantling boarding, any description, fixed in any position, complete all as specified and directed. |
| 32 | S & F 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board etc., complete as specified and directed. |
| 33 | Supply & fixing 18 mm thick PVC ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets, complete all as specified and directed. |
| 34 | Supply & fixing 18 mm thick PVC ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet Shutter/ drawer Front shutters, complete all as specified and directed. |
| 35 | Supply & fixing 5 mm thick PVC ply of plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base, complete all as specified and directed. |
| 36 | Supply & Fixing for 20mm wide & 1mm thick PVC EDGE BEDDING of PVC pested on edges with suitable adhesive, complete all as specified and directed. |
| 37 | Supply & Fixing of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, |
| 38 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished, complete all as specified and directed. |
| 39 | S&F of Brass flush handles 125 mm size for kitchen cabinet shutters, drawers, cupboards etc., complete all as specified and directed. |
| 40 | S & F Continous piano hinges stainless steel ,bright finish width of flaps when open 40 mm, complete all as specified and directed. |
| 41 | Supply and fixing Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples, complete all as specified and directed . |
| 42 | Supply and fixing Magnetic catcher for cupboards, complete as all specified and directed. |
| 43 | Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 44 | M & L for 15mm thick rendering on brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 45 | Material and labour for Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic , white or tinted over a priming coat of same make on wall surfaces, complete all as specified and directed. |
| 46 | Material and labour applying 1-2 mm thick wall care putty (JK/Birla/berger) on walls, including making surface even and smooth using sand paper before applying Priming coat, complete all as specified and directed. |
| 47 | Material and labour for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 48 | Material and labour for Complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete, complete all as specified and directed. |
| 49 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 50 | Dismantling floor, hearth or wall tiling including CM bedding (but not backing), skirting, complete all as specified and directed. |
| 51 | M & L for plain cement concrete (1:2:4) type B0 (using12.5mm graded crushed stone aggregate) 25mm thick, as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 52 | S&F in repair laminated wooden flooring of interlocking system plank size 1200x190x8 to 10 mm thick AC-4 Grade fixed over foam sheet 3 to 4mm thick as specified by manufacturer instruction, including dismantling old wooden floring planks, complete all as apecified and directed. |
| 53 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 54 | M&L for Non skid ceramic tiles/Mat finish tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white cement to match and iincluding 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed. |
| 55 | M&L Glazed ceramic colour tiles of size 450X300X7mm thick as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match and iincluding 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 56 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete as specified and directed. |
| 57 | M & L for 75mm thick PCC 1:4:8 Type D-2(using 40mm graded crushed stone aggregate) as in sub base over rammed earth, complete all as specified and as directed. |
| 58 | M&L for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/ rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles and removing from site, complete all as specified and as directed. |
| 59 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position, complete all as specified and as directed. |
| 60 | Form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping) for rough finished surface not exc 200 mm thick, complete all as specified and as directed. |
| 61 | M & L for reinforced cement concrete 1 : 2 : 4 Type B1 ( using 20 mm graded crushed stone aggregate) as in slabs supported on walls beam and colums in floors, roofs, landind, deck slabs and shelves and the like, complete all as specified and directed. |
| 62 | S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia, complete all as specified and as directed. |
| 63 | M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone slab & tiles, complete all as specified and as directed. |
| 64 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all as specified and directed. |
| 65 | S&F 16mm outer dia pipe of 3-layer PP-R Polypropylen e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylen random fittings fixed complete to walls, ceilings or in floors etc including taking down old u/s 15 mm steel tubes and connections, complete all as specified and as directed. |
| 66 | S&F 20mm outer dia pipe of 3-layer PP-R Polypropylen e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylen random fittings fixed complete to walls, ceilings or in floors etc including taking down old u/s 20 mm steel tubes and connections, complete all as specified and as directed. |
| 67 | Supply and fixing in repair Kitchen Plate rack with of size 750x900x250mm of stainless steel, complete.all as specified and as directed. |
| 68 | S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and conneting union to pipe overall size 530mm x 456mm bowlsize 476mm x 400mm x 200mm including fixing of waste coupling & outlet pipe, complete all as specified and as directed. |
| 69 | S&F in repair Corner glass shelf size 300mm for bath room fiting, complete all as specified and as directed. |
| 70 | S&F in repair glass shelf size 500x60mm for bath room fiting, complete all as specified and as directed. |
| 71 | S&F in repair, brass CP Wall branded mixer 2 in 1, 15 mm bore, for mixing hot and cold water , screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 72 | S&F in repair tubular towel rail 20mm dia, D type, 60cm long between flanges brass chromium plated, complete all as specified and as directed. |
| 73 | S&F in repair 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed. |
| 74 | S&F in repair CP Brass Soap Dish, complete all as specified and as directed. |
| 75 | S&F in repair CP Brass Toilet paper holder of standard size stainless steel fixed to walls, complete all as specified and as directed. |
| 76 | S&F in repair CP Brass Health faucet fixing in flexible CP pipe of length 1.00 m etc., complete all as specified and as directed. |
| 77 | S&F in repair CP Brass chromium plated bottle traps 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, complete all as specified and directed. |
| 78 | S & F in repair vitreous china oval bowl shape counter wash basin (white) of size 560mmx400mmx205mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe fitting etc. fixed in granite including cutting oval shape granite area, complete all as specified and as directed. |
| 79 | S&F in repairs vitreous chinaware wash down water closet pan padestal pattern One Piece floor mounted EWC with UF Soft Close slim seat Cover, hinges, fixing accessories of seat of size 380x655x765mm, P trap 180mm & Cistern with fittings , complete all as specified and as directed. |
| 80 | S&F in repair wall mounted CP goose neck branded sink mixer( Hot and Cold) with provision of swivel arm , connecting legs and wall flanges, complete all as specified and as directed. |
| 81 | S&F in repair wash hand basin Brass CP gose neck branded mixture 15mm bore for mixing hot and cold water screwed down for 15 mm iron pipe and fixed, complete all as specified and directed. |
| 82 | S & F in repair 15 mm bore CP Bib taps fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 83 | S & F in repair Stop valves/ angle valve 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 84 | S&F in repair for mirror cabinet of min size 430x330 mm with openable door shutter as approved by GE, complete all as specified and directed. |
| 85 | S&F in repair 600 mm x 450 mm looking mirror with PVC frame of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 86 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed. |
| 87 | S&F in repair PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 88 | S&F in repair grating doom 75 mm dia with or without waste hole of PTMT.(Minimum weight 25 gms) with grating for sutiable size, complete all as specified and as directed. |
| 89 | Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia, complete all as specified and as directed. |
| 90 | S&F 110 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in wall/trench, complete all as specified and as directed. |
| 91 | S&F 75 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in wall/trench, complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends 110 mm dia any radius, complete all as specified and as directed. |
| 93 | S&F PVC (SWR) bends 75 mm dia any radius, complete all as specified and as directed. |
| 94 | S&F PVC (SWR) vent cowl 110 mm dia, complete all as specified and as directed. |
| 95 | S&F PVC (SWR) vent cowl 75 mm dia, complete all as specified and as directed. |
| 96 | S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent incl S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia, including taking out old storage water tank, complete all as specified and directed. |
| 97 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 98 | M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 6 in brick walls, complete all as specified and directed. |
| 99 | M & L for Providing cement concrete type C2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 100 | M & L for plain cement concrete 1 : 2 : 4 Type B1 ( using 20 mm graded crushed stone aggregate) as in providing, cement concrete inlintel up to 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, complete all as specified and directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not other wise provided, Complete all as specified and directed. |
| 102 | S & F for Compound girders & stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, chamber frame, MS sheet including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-B, complete all as specified and directed. |
| 103 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 104 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outt in soft/loose soil,complete as specified and directed. |
| 105 | S&F PVC (SWR) 150mm bore (dia) 6 kg/Sqcm Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in floors, complete all as specified and directed. |
| 106 | M & L for plain cement concrete 1 :4: 8 Type D2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 107 | Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed. |
| 108 | M&L Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed. |
| 109 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed. |
| 110 | Taking down Carefully Ceiling Fan of any Capacity from site carefully, complete all as specified and directed. |
| 111 | Taking down Carefully Exhaust Fan of any Capacity from site carefully, complete all as specified and directed. |
| 112 | Taking down Carefully geyser of any Capacity from site and deposited in MES store yard carefully, complete all as specified and directed. |
| 113 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system concealed or on surface wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc., complete all as specified and directed for the following. |
| 114 | One light point / fan/bell/exhaust fan point wiring system controlled by one way switch, complete all as specified and directed. |
| 115 | One 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch, complete all as specified and directed. |
| 116 | One 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch, complete all as specified and directed. |
| 117 | Description all as per serial item No 113 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete, complete all as specified and directed. |
| 118 | Description all as per serial item No 113 here-in-before but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as continuous earth wire, complete all specified and directed. |
| 119 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all specified and directed. |
| 120 | Supply and fixing of modular type bell push 5 Amps 220 Volts AC, with one module, complete all specified and directed. |
| 121 | Supply and fixing of bell Ding Dong Type, 220 volt AC, Single Pole, complete all specified and directed. |
| 122 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all specified and directed. |
| 123 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all specified and directed. |
| 124 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all specified and directed. |
| 125 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed. |
| 126 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all specified and directed. |
| 127 | S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed. |
| 128 | Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 300mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. |
| 129 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC batten type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting, complete all as specified and directed. |
| 130 | Supply and fixing of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and makong electric connection and including taking down of old fitting, complete all as specified and directed. |
| 131 | Supply and fixing of LED street light fitting of rated capacity 20W to 25Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting, complete all as specified and directed. |
| 132 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TPN 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 133 | S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 8 way type 220 volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface, complete all as specified and directed. |
| 134 | S&F MCB SPN 40 to 63 Amp, 240 Volts, with breaking capacity 10 kA rupturing capacity, 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection, complete all as specified and directed. |
| 135 | S&F MCB SP 06 to 32 Amp, 240 Volt, 10 kA rupturing capacity 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection, complete all as specified and directed. |
| 136 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 3 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed . Note: 4 runs of 10 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 137 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover, complete work all as specified and directed . |
| 138 | Supply and fixing of rigid non metalic PVC conduit of size 20/25 mm bore heavy duty with all fitting laid in trenches/wall including providing clamping arrengment for holding of pipe on wall in proper size of clamps,nut bolt, and washer etc., complete all as specified and directed. |
| 139 | Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 kw capacity 25 litre, BEE 5 stare rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., Complete all as specified and directed.. |
| 140 | Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site, complete all as specified and directed |
| 141 | Supply and fixing recessed / ceiling concealed/surface mounted flate square slim panel integrated design LED luminaire light panel type light fitting of size/type 1 fit x 1fit of rating capacity in 25W decorative warm/white type with high performance LEDs and eletronic driver and mounting slot with long life energy saving complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour set complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makIng electric connection and including taking down of old fitting, complete all as specified and directed. |
| 142 | Supply and fixing of surface wall mounted decorative wall bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour complete light fitting set and complete set and including providing of suitable type of flate fexible two/three core cable and making electric connection and including taking down of old fitting, complete all as specified and directed. |
| 143 | Supply and fixing surface mounted LED decorative type angle adjustable sport light / bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watt LED complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour complete light fitting and including providing of suitable type of flate fexible two/three core cable and making electric connection and including taking down of old fitting, complete all as specified and directed. |
| 144 | Notes :-An amount of Rs 1,24,502.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
