Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: SPL REPAIR TO CERTAIN BLDG IN YOGENDRA VIHAR POOL B AT MORAR CANTT UNDER GE GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/45 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles, cement plaster ,old app from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the rubbish/disposed off material outside of the MOD complete all as specified and directed. |
| 3 | M&L for visible hairline cracks on concrete roof / screed more than 0.50 mm thick and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified & directed. |
| 4 | M&L for cutting grooves in brick /concrete wall, 75mm wide and 65mm deep and shaping horizontal face of groove with CM 1:3 complete all as specified and as directed. |
| 5 | M&L for Providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof padding / roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping, leveling course in roof etc finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and as directed. Notes:-(a) The work shall be executed through authorised applicator of manufacturer.(b) Authrised Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly form manufacturer.(d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE. |
| 7 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 18-20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner all as specified and as directed. |
| 8 | M&L the non shrink high mechanical strength properties epoxy based mortar @ 5kg/RM on all corner joints of wall to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc complete all as specified & directed. |
| 9 | M&L for applying bonding agent for bonding old to new concrete surface likes chajja/ beam/ceiling/facia etc by high performance modified Styene- Butadiene Rubber (SSR) base binder. Applying of binder is as 10 Sqm/ per lits etc complete all as specified & directed. |
| 10 | M&L for applying 25 mm thick (average) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/ ceiling, mortar having good compressive strength and shrikage resistance etc complete all as specified & directed. |
| 11 | M&L for applying Injection grouting in all RCC members like beam, column, slab, corners of RCC joints etc of building as specifed and directed by GE, procedure as follows:-(i) Drilling Holes of 12mm dia upto 100mm deep in structural members at the interval of 300mm in staggered manner or along the crack line in RCC structural member including cleaning of the holes by air blower and M&L for inserting 12mm dia NRV nozzles compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix the nozzles inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 hrs before grouting: Cut and remove nozzle projections, excess putty, if any, over concrete element by grinding, levelling and finishing the external surface, after completion of the work, etc complete all as specified and directed. The rate shall include scaffolding and other necessary works. (ii) Providing and injecting two parts, low viscous, high strength epoxy resin based moisture insensitive liquid using pressure injector with accessories till nozzle refuses to accept the grout including mixing of grout material components in adequate proportions as per manufacturer's instructions by weight batching and grouting the mixed material into the structural member by grouting gun, maintaining desired pressure in the gun by air compressor and maintaining pressure at exit about 2 to 3 kg/cm2 by monitoring pressure guage at exit. The mixed grout should have following properties:- (i) Mixed Density 1.1 kg/I (at + 27°C); Viscosity ~ 250 mPas at + 30 °C and should comply according to ASTM C 881, Type II and IV, Grade-1, class E+F (i° Compressive strength >+ 70 N/ sqmm (7 days) according to ASTM C 579; Tensile Strength ~ 50 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus ~2000 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (i) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30oC cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Rate inclusive of all material, nozzle, tool & plants and any other necessary arrangements required for the procedure as mentioned above. |
| 12 | Demolition of concrete of any description in any position and removing rubbish demolished material from site complete all as directed. |
| 13 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed. |
| 14 | M & L for Washed stone grit plaster on exterior walls in two layers, (i) under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, (ii) top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern and colour including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete as per specifications and direction of the GE. |
| 15 | M & L for forming making groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the GE. |
| 16 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and cutting of trunk, branches of tree and Cutting or uprooting grass , then washing the surface with Bleaching powder solution for treatment of fungal applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance, Superior elasticity and covers hairline crack up to 3.2 mm exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of of exterior primer (recommended by paint manufacturer) applied @ 0.90 litre/ 10 sqm over prepared surface complete all as specified and as directed. |
| 18 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance, Superior elasticity and covers hairline crack up to 3.2 mm exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of of exterior primer (recommended by paint manufacturer) applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 19 | M&L for 10 mm thick rendering in cement mortar (1:4) on fair faces or brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 20 | M&L applying two coat OBD (Acrylic) of any colour over and including 2 mm thick waterproofing putty to obtain surface smooth complete all as specified and directed. |
| 21 | S&F GI wire netting/ Chicken wire mesh 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed. |
| 22 | M&L for rendering 5-10 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and fair without using extra cement using necessary form work if any complete all as specified and directed. |
| 23 | M/L for three coat of white wash on New surfaces (wall) including all prereration complete all as specified & directed |
| 24 | M/L for three coat of white wash on New surfaces of Ceiling including prereration complete all as specified & directed |
| 25 | M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed. |
| 26 | M&L for preparation of for complete removing of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of distemper oil bond emulsion (acrylic) by using rollers including apply 2 mm thick water proof putty finished surface smooth complete all as specified and directed. |
| 27 | M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on wall complete all as specified and directed. |
| 28 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 29 | S&F 110 mm PVC (SWR) pipes single socketed (ISI marked), in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 30 | S&F 110 mm PVC (SWR) pipes single socketed (ISI marked), in any length with rubber ring joints fixed in wall including suitable fixing arrangement complete all as specified and directed. |
| 31 | S&F 75 mm PVC (SWR) pipes single socketed (ISI marked), in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed . |
| 32 | S&F 75 mm PVC (SWR) pipes single socketed (ISI marked), in any length with rubber ring joints fixed in wall including suitable fixing arrangement complete all as specified and directed. |
| 33 | S& F PVC SWR bends any radius 75mm dia with access door jointed with adhesive complete all as specified and directed. |
| 34 | S& F PVC SWR bends any radius 110 mm dia with access door jointed with adhesive complete all as specified and directed. |
| 35 | S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door jointed with adhesive complete all as specified and directed. |
| 36 | S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door jointed with adhesive complete all as specified and directed. |
| 37 | S&F PVC SWR vent cowl 110 mmn dia complete all as specified and directed. |
| 38 | S&F 75 mm PVC (SWR) couplers complete all as specified and directed. |
| 39 | S&F 110 mm PVC (SWR) couplers complete all as specified and directed. |
| 40 | S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal jointed with adhesive complete all as specified and directed. |
| 41 | S&F 110mm PVC pipe 'P' or 'S' trap fixed on PCC bed complete all as specified. |
| 42 | S&F 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specifide. |
| 43 | Taking down 15mm bore steel water tubing and connections etc, including removal from site complete all as specified. |
| 44 | Taking down 20mm bore steel water tubing and connections etc, including removal from site complete all as specified. |
| 45 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 46 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 47 | S&F in repair W.C vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P - or S trap,flush pipe including necessary PCC tilling complete excluding cistern complete all as specified. |
| 48 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 49 | S&F Towel Ring of CP fixed with and including Chromium plated steel screws and wooden/plastic cleats complete all as specified and as directed. |
| 50 | S&F in repair Fancy Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and as directed. |
| 51 | S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 52 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed. |
| 53 | S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including CP waste coupling 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified. |
| 54 | S&F in repair CP fancy type bib tap cast copper alloy with capstan head handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 55 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated steel screws and cup washers complete all as specified and as directed. |
| 56 | S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified. |
| 57 | S&F in reapir 15 mm bore brass CP wall mixer for mixing hot & cold water with shower controlled (3 in 1 wall mixer) screwed down for iron pipe and fixed complete all as specified and directed |
| 58 | S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed |
| 59 | S&F in repair Brass chromium plated shower rose 125mm dial with switch joints size with15 mm shower arm complete all as specified and directed |
| 60 | S&F in reapir 15 mm bore brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 61 | S&F in reapir 15 mm bore brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 62 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm |
| 63 | S&F in replacement stainless steel (Grade 304) kitchen plate rack made out of 0.63mm thick stainless steel of size 900x750 mm including screws and wt not less than 5.00 Kg complete all as specified and directed. |
| 64 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 65 | a) Dismantling of floor of WC and Bath not exceeding 500mm deep, removing cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable method as per site condition, including grinding of sharp edges complete all as specified and directed.(b) Cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable technique as per site condition complete all as specified and directed.(c) M&L for providing a glass fibre reinforced acrylic modified cementitious coating system comprising base coat @ 1.50 Kg/Sqm, glass fibre reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc / MC Bauchemie India Pvt Ltd, applied to floor area and vertical surfaces thereof complete all as specified and directed.(d) M&L for 15mm thick protection plaster in cement mortar (1:3) mixed with integral waterproofing compound (IWPC) in accordance with manufacturer’s instructions complete all as specified and directed.(e) M&L for providing 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (Paid separately under respective item).(f) M&L for filling sunken portion with PCC (1:5:10) type E2 using 40mm graded aggregate and finishing with 25mm thick PCC (1:2:4) type B0 complete all as specified and directed.Notes:(i) The work shall be executed only through authorised manufacturer’s applicator.(ii) Para (c) is applicable for both floor area and vertical surfaces of the same area.(iii) For payment, net floor area shall be measured.(iv) The cost of all operations specified above shall be deemed to be included in the quoted rates of the respective items and nothing extra shall be admissible on this account. |
| 66 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing rubbish from site complete all as specified and directed. |
| 67 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed. |
| 68 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site complete all as specified and as directed. |
| 69 | Dismantling glazed tiles/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) and removing from site complete all as specifide. |
| 70 | M&L for non skid ceramic coloured tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 71 | M&L for non skid ceramic coloured tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 72 | M&L for non skid ceramic coloured tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.18 sqm but not exceeding 0.36 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 73 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed. |
| 74 | M&L for 18-20 mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM 1:4 including taking down old granite complete all as specified and as directed. |
| 75 | M&L for mirror polished kota stone slab flooring 18-20 mm thick (Size of stone 550x550mm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed or bedding layer in CM 1:6 including taking down old kota stone complete all as specified and as directed. |
| 76 | M&L for Pre polished polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed including taking down old kota stone complete all as specified and as directed. |
| 77 | M&L 75 mm thick PCC 1:3:6 (40 mm graded stone aggregate) Type C2 as in plinth protection , PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed by engineer in charge. |
| 78 | M&L Providing, 25 mm thick cement concrete 1:2:4 type B0 (12.55 mm graded aggregate ) as in leveling course in floor etc all as specified and as directed by engineer in charge. |
| 79 | Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) removing from site complete all as specified. |
| 80 | S&F for 18mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified. |
| 81 | S&F for 18mm thick PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified. |
| 82 | S&F for continous (piano) hinges , mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 83 | S&F for mild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos steel screw for kitchen cabinet, Cup board, wardrobe complete all as specified and directed. |
| 84 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 85 | S&F Stainless Steel 2 Levers Cupboard locks grade 1, Size 50mm fixed with steel screws complete all as specified and directed. |
| 86 | S&F 40mm dia, cupboard knobs fixed with nut, steel screw and washer of mild steel, bright finished complete all as specified and as directed. |
| 87 | S&F for 100 mm Stainless Steel handles, cast type, polished bright and fixed complete all as specified and directed. |
| 88 | S&F 15x20x4 Inch stainless steel kitchen basket with stainless steel wire perforated plate fabricated and stainless steel telescopic drawer channel with ball bearing soundless complete all as specified and as directed. |
| 89 | S&F for 12 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified. |
| 90 | Taking down Chowkats or frames not exceeding 1.5 Sq.m each with shutters (Without taking off shutters from the frames) and removing from site complete all as specified and directed. |
| 91 | Taking down Chowkats or frames exceeding 1.5 Sq.m but not exceeding 4 Sq.m each with shutters (Without taking off shutters from the frame) and removing from site complete all as specified and directed. |
| 92 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of GE. |
| 93 | S&f Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of GE. |
| 94 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 95 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 96 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type/ laminated flush door shutter (single or double leaf) of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 97 | S&F Factory made single extruded WPC (Wood Polymer Composite) wire mesh solid WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Door to be panelled with SS mosquito mesh and XTN aluminium Mesh for additional saftey all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 98 | S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 99 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 100 | Supply and fix Stainless steel butt hinges, 100mm long, medium weight fixed with steel screws complete all as specified and directed. |
| 101 | S&F stainless steel, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or steel alloy and fixed complete all as specified and directed. |
| 102 | Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed. |
| 103 | S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified . |
| 104 | Supply and fixing stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with nail complete all as specified and directed. |
| 105 | S & F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions with one or more rebates including jointing cleat for fixing etc. |
| 106 | S & F anodised powder coated aluminium windows, ventillators shutters, slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, locking latches etc complete. |
| 107 | S & F anodised powder coated aluminium windows, ventillators shutters, side hung type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hingestype B-21 100mm long (2 no.) suitable handle (1 no.) locking latches etc complete all as specified and directed. |
| 108 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed. |
| 109 | M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 110 | S&F 4.8 mm thick sheet or tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 111 | S&F 4.8 mm thick sheet or tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 112 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed. |
| 113 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed. |
| 114 | Removing excavated material n exc. 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed. |
| 115 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed. |
| 116 | M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / filling in mass concrete complete all as specified.and directed. |
| 117 | M&L for reinforced cement concrete M-25 ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed. |
| 118 | M&L for reinforced cement concrete M-25 ( using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts and struts etc. complete all as specified and directed. |
| 119 | M&L for reinforced cement concrete M-25 ( using 20 mm graded stone aggregate ) as in Roof beam, lintel band, cantilevers bressummers, lintels over 1.5m span etc. complete all as specified and directed. |
| 120 | M&L for reinforced cement concrete M-25 ( using 20 mm graded stone aggregate ) as in slab supported on walls ,beams, columns in floor , roof , landing complete all as specified and directed. |
| 121 | M&L, Formwork to sides of concrete, in foundations, footings,base of columns & plinth beams, etc in flat for rough finshed surfaces of concrete complete all as specified and directed. |
| 122 | M and L form work to Columns, square/rectangular, rough finish surfaces of concrete complete all as specified and directed. |
| 123 | M&L, Formwork to soffits of suspended slab such as roof slab, floor slabs, landing and similar work; not exc 200mm thick complete all as specified and directed. |
| 124 | M&L formwork to sides and soffits of floor or roof beams, beam haunchings, lintel bands, cantilevers shelves incldng sup-ports, overhangs, etc comlete all as specified and directed. |
| 125 | M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 126 | M&L for mild steel TMT bars 6-8 mm dia as in stirrups , spacers , and binders , cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 127 | M&L for carrying out treatment for RCC Chajja’s, Ceilling, facia etc; in the following stages :- (i) Dismantling and removing damaged core concrete by manually/ mechanically means in columns, beam, roof slab, chajja, lintels, etc complete including disposal of unserviceable debris. (ii) Diamond wire saw cutting making profile at edges and avoiding feather edges.(iii) Hydro-demolition cutting / cleaning with high-pressure water jetting (iv) Chipping of loose concrete from surface to expose sound concrete beneath using light chisel, hammer & also preparing concrete surface to receive further treatment, disposing the unserviceable debris (v) Sand blasting for cleaning of reinforcement and chipped surface of concrete so as to cause an intense abrading of the reinforcement and removal of rust from entire surface of reinforcement to achieve shining bright surface (vi) Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface |
| 128 | Demolition of Reinforced Cement Concrete (Existing RCC water tank, kitchen shelves etc ) of any description and in any position not otherwise specifically provided and removing from site complete all as specified and directed |
| 129 | M & L, for 75 mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and as directed. |
| 130 | M&L 60mm thick laquer finish (ISI Marked) factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 131 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 132 | Excavation in post holes (or similar holes) n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50 and making good surface in soft/loose soil all as specified and as directed. |
| 133 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 134 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails,column for trusses, rafter and fastenings and heavy bracket framing (Beam, tee, angle, tubular, channel or flat sections, ) including distance pieces, cleats etc. all as specififed and as directed by engineer in charge. |
| 135 | Dismantling of Asbestos cement (corrugated, semi corrugated etc)/CGI sheets in roof covering complete all as directed. |
| 136 | Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 137 | M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed, |
| 138 | M and L providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is provided using chemical emulsion at the rate of 2.25 litres per linear metre of the vertical surface of the sub-structure to a depth of 300mm including drilling and plugging holes etc complete all as specified and as directed. |
| 139 | M&L for chequered cement concrete tiles 250mm x 250mmx 20 to 22mm thick (ISI marked) of approved colour, set jointed and pointed in cement slurry in floors with grey cement and pigments laid over and including (screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4) complete all as directed. |
| 140 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 141 | Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge. |
| 142 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 143 | Taking down unserviceable TPN DB/meter distribution box with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 144 | M&L, concealed point wiring (modular) with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes suitable for modular switch factory made for mounting switch, regulators etc with and including PVC sheets of suitable modular with cover plate ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete |
| 145 | One light point controlled by one switch. |
| 146 | One Ceiling fan point controlled by one switch. |
| 147 | One Exhaust fan point controlled by one switch. |
| 148 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 149 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 150 | One light point controlled by 2 x two way switches |
| 151 | One Bell/Buzzer point controlled by one way 5 Amp push button switch. |
| 152 | Description all as per item No 143 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. |
| 153 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 154 | S&F Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed. |
| 155 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 156 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 157 | S&F Modular switch 2 way ,6 A,1 module complete all as specified and directed. |
| 158 | S&F Modular ceiling rose surface bakelite two or three terminal complete all as specified and directed. |
| 159 | S&F Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 160 | S&F Bell Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. |
| 161 | S&F Modular Bell push ,6A ,1 module complete all as specified and directed. |
| 162 | S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete. |
| 163 | S&F LED Mirror Light with extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt,incluing reqd length, 1.5 Sqmm PVC multistranded BIS marked 02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 164 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting ,Efficiency >100 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 165 | S & F LED of 30 watt security light fittings with photometric sensor, better optics for uniform distribution IP 65 protection Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and directed. |
| 166 | M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4.0 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 167 | M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6.0 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 168 | S&F in repair sheet metal box Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. |
| 169 | S&F in repair MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 170 | S&F, MCB SPN 40 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 171 | S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. |
| 172 | S&F, MCB SP 240 volts, 6 to 40-63 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. |
| 173 | Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including self closing locking arrangement and comprising for following fittings (i) MCCB TPN, 100 Amps ,16 KA - 01 No (For incoming) (ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts ) - 01 No (iv) Indicator Lamp set of three R,Y,B - 01 Set (v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB SP 63 Amps- 05 Nos (For outgoing) (vii) Nutral bus bar link mounted on insulator (viii) Place for fixing the energy meter. - 04 Nos (ix) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter. Note;- (i) Cable entry gland made of polycarbonate of appropriated size shall be provided in each cable / wire entry as per IS standered. (ii) All internal wiring inside the panel used for metring purpose shall be PVC insulated FRLSH, ISI marked of size not less than 1.5 Sqmm. |
| 174 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core. |
| 175 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete. |
| 176 | Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 177 | S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 178 | Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type. |
| 179 | Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specifies and directed. |
| 180 | Taking out old u/s pipe line alongwith fittings from existing connections of size 20 mm dia complete all as specifies and directed. |
| 181 | M & L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed. |
| 182 | M & L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed. |
| 183 | S&F 20 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 20 mm dia all as specified and directed. |
| 184 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II.. |
| 185 | Supply and fix on walls with fastness of suitable size and making electric/water connection, electric water heater, storage type glass lined enamel tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directed. |
| 186 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories,copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) completion complete all as specified and directed. |
| 187 | Supply & fix exhaust fans,steel body, AC single phase 230 Volt of size 300 mm sweep copper winding with louver completion completion all as specified and directed. |
| 188 | Supply and fix exhaust fan(Fresh Air Fan) made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as per specified and directed. Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
