|
| 1 | Almirah steel Med and Small (FD-243 & 1032) |
| 2 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed. |
| 3 | M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed. |
| 4 | M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed. |
| 5 | M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH STEEL MED and made to shape and size as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Locking Device, complete all as specified and as directed. |
| 6 | M&L LOCK (MAKE : GODREJ/LINK) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Lock, complete all as specified and as directed. |
| 7 | M&L Steel HANDLE (as approved) of ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out old unserviceable Handle, complete all as specified and as directed. |
| 8 | M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH STEEL MED and fixing to Almirah as shown on Drawing No. FD-243 & FD-1032 including taking out unserviceable Hinge, complete all as specified and as directed. |
| 9 | M&L preparation of old surfaces of ALMIRAH MED STEEL (Drawing No. FD-243 & FD-1032) by Sand Paper/Scrapper and applying Two Coat of OG Synthetic Enamelled Paint (as approved) over one coat of red oxide by Spray Painting Machine on external and internal surface of almirah including shelfs, complete all as specified and as directed. |
| 10 | Almirah Large steel (FD-1031 FD-67) |
| 11 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed. |
| 12 | M&L DOOR made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed. |
| 13 | M&L LEG made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed. |
| 14 | M&L LOCKING DEVICE made out of 1.0mm thick Mild Steel Sheet of ALMIRAH LARGE STEEL and made to shape and size as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Locking Device, complete all as specified and as directed. |
| 15 | M&L LOCK (MAKE : GODREJ/LINK) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Lock, complete all as specified and as directed. |
| 16 | M&L Steel HANDLE (as approved) of ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out old unserviceable Handle, complete all as specified and as directed. |
| 17 | M&L Mild Steel HINGE (as approved) 75mm in size suitable for ALMIRAH LARGE STEEL and fixing to Almirah as shown on Drawing No. FD-67 & FD-1031 including taking out unserviceable Hinge, complete all as specified and as directed. |
| 18 | M&L preperation of old surfaces of ALMIRAH LARGE STEEL (Drawing No. FD-67 & FD-1031) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over one coat of red oxide by Spray Painting Machine on external and internal surface of almirah including shelfs, complete all as specified and as directed. |
| 19 | Chair Computer and Chair Revolving Various types (TP) |
| 20 | M&L TAPESTRY/FABRIC CLOTH over SYNTHETIC FOAM 50 mm thick (as approved) for SEAT/BACK of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed. |
| 21 | M&L CASTOR WHEEL (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable or broken Castor Wheel from Chairs of same type / quality complete all as specified and as directed. |
| 22 | M&L stainless steel BOTTOM BASE (as approved) of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Bottom Base from Chairs, complete all as specified and as directed. |
| 23 | M&L GAS LIFTING HYDROLIC SYSTEM of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Gas Lifting Hydrolic System from Chairs, complete all as specified and as directed. |
| 24 | M&L HANDLE of CHAIR COMPUTER/ CHAIR VISITOR/ CHAIR REVOLVING including taking out unserviceable Handle from Chairs, complete all as specified and as directed. |
| 25 | Desk with seat 63.5 x 104.8 x 68.8 x 27cm (TP) |
| 26 | M&L TOP of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading on outer / exposed edges including taking out unserviceable Top, complete all as specified and as directed. |
| 27 | M&L BACK of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable back, complete all as specified and as directed. |
| 28 | M&L SEAT of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable seat, complete all as specified and as directed. |
| 29 | S&F of new leg/frame part with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for Desk with seat as shown on Drawing and removing of unserviceable Leg / frame part duly necessary preperation of surfaces, applying two coats of (OG) Synthetic enamel paint (as approved) by spray painting machine over one coat of red oxide primer complete all as specified and as directed. |
| 30 | M&L removing/scrapping old worn out Paint from Desk with seat (Drawing No. TP) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 31 | S&F handle for Desk with seat including taking out existing unserviceable handle of any description complete as shown in drawing and directed by GE. |
| 32 | Desk with seat 70.5 x 104.8 x 78.3 x 35cm (TP) |
| 33 | M&L TOP of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading on outer/exposed edges including taking out unserviceable Top, complete all as specified and as directed. |
| 34 | M&L BACK of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable back, complete all as specified and as directed. |
| 35 | M&L SEAT of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable seat, complete all as specified and as directed. |
| 36 | S&F of new leg/frame part with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for Desk with seat as shown on Drawing and removing of unserviceable Leg / frame part duly necessary preperation of surfaces, applying two coats of (OG) Synthetic enamel paint (as approved) by spray painting machine over one coat of red oxide primer complete all as specified and as directed. |
| 37 | M&L removing/scrapping old worn out Paint from Desk with seat (Drawing No. TP) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 38 | S&F handle for Desk with seat including taking out existing unserviceable handle of any description complete as shown in drawing and directed by GE. |
| 39 | Desk with seat 75 x 104.8 x 87.2 x 41cm (TP) |
| 40 | M&L TOP of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable Top, complete all as specified and as directed. |
| 41 | M&L BACK of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable back, complete all as specified and as directed. |
| 42 | M&L SEAT of Desk of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing laminated Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, including taking out unserviceable seat, complete all as specified and as directed. |
| 43 | S&F of new leg/frame part with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for Desk with seat as shown on Drawing and removing of unserviceable Leg / frame part duly necessary preperation of surfaces, applying two coats of (OG) Synthetic enamel paint (as approved) by spray painting machine over one coat of red oxide primer complete all as specified and as directed. |
| 44 | M&L removing/scrapping old worn out Paint from Desk with seat (Drawing No. TP) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 45 | S&F handle for Desk with seat including taking out existing unserviceable handle of any description complete as shown in drawing and directed by GE. |
| 46 | Locker Bed Side Steel (FD-257/1029) |
| 47 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed. |
| 48 | M&L DOOR made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Door, complete all as specified and as directed. |
| 49 | M&L LEG made out of 1.0mm thick Mild Steel Sheet of LOCKER BED SIDE STEEL and made to shape and size as shown on Drawing No. FD-257 & FD-1029, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Leg, complete all as specified and as directed. |
| 50 | M&L aluminum HASP & STAPPLE of size 100mm for LOCKER BED SIDE STEEL and fixed as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hasp & Stapple, complete all as specified and as directed. |
| 51 | M&L Steel HANDLE (as approved) of LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Handle, complete all as specified and as directed. |
| 52 | M&L Mild Steel HINGE (as approved) 50mm in size suitable for LOCKER BED SIDE STEEL and fixing to Almirah as shown on Drawing No. FD-257 & FD-1029 including taking out unserviceable Hinge, complete all as specified and as directed. |
| 53 | M&L Complete removing/scrapping old worn out Paint from LOCKER BED SIDE STEEL (Drawing No. FD-257 & FD-1029) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over one coat of red oxide by Spray Painting Machine on external and internal surface of locker including shelfs, complete all as specified and as directed. |
| 54 | Chair writing (FD/MAP/12) |
| 55 | M&L Seat of CHAIR WRITING and S&F of complete Seat including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed. |
| 56 | M&L Back of CHAIR WRITING and S&F of complete Back including taking out old worn out Tapestry/ Fabric Cloth and Foam from Chairs, complete all as specified and as directed. |
| 57 | M&L HANDLE of CHAIR WRITING including taking out unserviceable Handle from Chairs, complete all as specified and as directed. |
| 58 | M&L Mild Steel Flat Iron 25x3.0mm as RUNNER of length 500mm (approx), fixing one End and Other End welded to CHAIR WRITING, applying two coat of Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer on Steel Surfaces as shown on Drawing No. FD/MAP/12 including taking out unserviceable Runner, complete all as specified and as directed. |
| 59 | Rack steel 6 tier (FD-77/ FD-1027) |
| 60 | M&L SHELF made out of 1.0mm thick Mild Steel Sheet of RACK 6 TIER STEEL and made to shape and size as shown on Drawing No. FD-106 & FD-1038, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed. |
| 61 | Taking out unservisiable ANGLE IRON and supply & fixing new angle iron fo size 40x40x4 mm for FD-1038 and 30x30x3mm for FD-106 of RACK 6 TIER STEEL as shown on Drawing, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer including taking out unserviceable Shelf, complete all as specified and as directed. |
| 62 | M&L Complete removing/scrapping old worn out Paint from RACK 6 TIER STEEL (Drawing No. FD-106 & FD-1038) by Sand Paper/Scrapper and applying One Coat of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine over one coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 63 | Foam with out Back (FD-77/ FD-1027) |
| 64 | M&L SEAT of FOAM WITHOUT BACK made of single plank of teak wood of size 1800x255x25mm as shown on Drawing No. FD-77/ FD-1027 including taking out unserviceable seat, complete all as specified and as directed. |
| 65 | M&L for Broken Leg with Mild Steel Square Pipe of size 25mm x1.6 mm thick(as required) for FOAM WITHOUT BACK as shown on Drawing No. FD-77 / FD-1027 necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer on steel surface complete all as specified and as directed. |
| 66 | M&L removing/scrapping old worn out Paint from FOAM WITHOUT BACK (Drawing No. FD-7&/ FD-1027) by Sand Paper/ Scrapper and applying Two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 67 | M&L welding (full round on pipe as a one spot) of broken part of FOAM WITHOUT BACK as shown on Drawing No. FD-77/ FD-1027 rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer , complete all as specified and as directed. |
| 68 | Teapoy Verandha (Fd/E6/MAP/18 & FD-255) |
| 69 | M&L TOP of TEAPOY VERANDHA of MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD/E6/MAP/18 or FD- 255 including taking out unserviceable Top, complete all as specified and as directed. |
| 70 | S&F of new leg/frame part with Mild Steel Square Pipe of size 18mm x 1.6 mm thick / 20 mm round pipe 1.6 mm thick (as required) for TEAPOY VERANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-1009 and removing of unserviceable Leg / frame part duly necessary preperation of surfaces, applying two coats of (OG) Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer complete all as specified and as directed. |
| 71 | M&L removing/scrapping old worn out Paint from TEAPOY VERANDHA (Drawing No. FD/E6/MAP/18 and FD-255) by Sand Paper/ Scrapper and applying Two Coats of OG Synthetic Enamelled Paint (as approved) by Spray Painting Machine, complete all as specified and as directed. |
| 72 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of TEAPOY VERANDHA as shown on Drawing No. including taking out unserviceable Shoe, complete all as specified and as directed. |
| 73 | M&L welding (full round on pipe as a one spot) of broken part of TEAPOY VERANDHA as shown on Drawing No. FD/E6/MAP/18 and FD-255, rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer , complete all as specified and as directed. |
| 74 | Shoe rack (FD/E6/MAP) |
| 75 | M&L welding (full round on pipe as a one spot) of broken part of RACK SHOE as shown on Drawing , rubbing welded portion to obtain a smooth surface, necessary preperation of surfaces, applying two coats of Syntheic enamel paint (as approved) by spray painting machine over one coat of red oxide primer, including removal of unserviceable part complete all as specified and as directed. complete all as specified and as directed. |
| 76 | S&F HARD RUBBER SHOE superior quality (as approved) fixing to Leg of Shoe rack as shown on Drawing No.including taking out unserviceable Shoe, complete all as specified and as directed. |
| 77 | S&F in repair Net complete for Shoe Rack steel made of 3mm dia mild steel complete all as shown on drawing and as directed. |
| 78 | Charpoy GI Pipe with Plytop (FD-220) |
| 79 | M&L Removing of unservicable long rail and supply and fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends complete as all as per drg and as directed. |
| 80 | M&L Removing of old unserviceable short rail and making of 2 Nos short rails from long rails obtained from item No. 13.1 by cutting and threading the both ends of short rails and fixing in position complete. |
| 81 | M&L Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY GI PIPE WITH PLYWOOD TOP by nut and bolts of required number as shown on Drawing No. including taking out unserviceable Plywood Top, complete all as specified and as directed. |
| 82 | M&L Complete Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 13.2 by cutting and threading the one ends of legs and fixing in position by plugging of leg bottom with hardwood of required size complete. |
| 83 | M&L Removing of unserviceable / damage 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked complete as per drawing. |
| 84 | M&L Complete Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) complete all as per drawing. |
| 85 | Sofa Set 4 Seater (FD-373) |
| 86 | SOFA SET 4 SEATER (a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg teak wood as per existing shape and size. Complete all as specified in drawing and as directed. |
| 87 | (b) Side Back/Front Rail : Taking down old U/S Side back/Front Rail of sofa set 4 seater and S& F new Side back/Front Rail teak wood as per existing shape and size. Complete all as specified in drawing and as directed. |
| 88 | (c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 4 seater and S& F new batterns for seat/back teak wood as per existing shape and size. Complete all as specified in drawing and as directed. |
| 89 | (d) Plywood for Seat/Back : Taking down old U/S plywood of seat and back of sofa set 4 seater and S& F new 12mm thick BWR grade ISI marked plywood for seat and back as per existing shape and size. Complete all as specified in drawing and as directed. |
| 90 | (e) Arms : Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms made with teak wood as per existing shape and size. Complete all as specified in drawing and as directed by Engr-in-Charge |
| 91 | (f) Cushion for Seat and Back : Removing of existing U/S cushion from seat and back of sofa set 4 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwell duly covered with cloth cover of best approved quality (rate of Tapestry cloth should not be less than Rs. 700.00 Per RM) stitched with fine standard thread and providing best quality chain with runner on one side as approved by GE. Rest all as specified in drg and as directed |
| 92 | (g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item complete all as directed. |
| 93 | (h) Cover Only for Sofa Set 4 Seater :- Opening and taking out old unserviceable Cushion Cover size 21\\"x22\\"x4\\" and S&F New Cushion Cover made out of approved Tapestry cloth of best quality duly stitched with fine standard thread and providing best quality chain with runner on one side as approved by GE. Rest all as specified in drg and as directed. Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM) |
| 94 | (j) Material and Labour for polishing of Sofa set 4 seater including scrapping of rough surface and old worn out polished layer with scrapper /sand paper/grinder machine for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. |
| 95 | Sofa Set 5 Seater (FD-373 & MAP-ll/02) |
| 96 | SOFA SET 5 SEATER (a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S& F new front/ Rear leg made with teak wood as per existing shape and size. Complete all as specified in drawing and as directed. |
| 97 | (b) Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Rail of sofa set 3 seater and S& F new Side back/Front Rail made with teak wood as per existing shape and size. Complete all as specified in drawing and as directed. |
| 98 | (c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 5 seater and S& F new batterns for seat/back made with teak as per existing shape and size. Complete all as specified in drawing and as directed. |
| 99 | (d) Plywood for Seat/Back : Taking down old U/S plywood of seat and back of sofa set 5 seater and S& F new 12mm thick BWR grade ISI marked plywood for seat and back as per existing shape and size. Complete all as specified in drawing and as directed. |
| 100 | (e) Arms : Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of teak wood as per existing shape and size. Complete all as specified in drawing and as directed by Engr-in-Charge |
| 101 | (f) Cushion for Seat and back : Removing of existing U/S cushion from seat and back of sofa set 5 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly covered with cloth cover of best approved quality (rate of Tapestry cloth should not be less than Rs. 700.00 Per RM) stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE. Rest all as specified in drg and as directed. |
| 102 | (g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item complete all as directed. |
| 103 | (h) Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21\\"x22\\"x4\\" and S&F New Cushion Cover made out of approved Tapestry cloth of best quality duly stitched with fine standard thread and providing best quality chain with runner on one side as approved by GE. Rest all as specified in drg and as directed. Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM) |
| 104 | (j) Material and Labour for polishing of Sofa set 5 seater including scrapping of rough surface and old worn out polished layer with scrapper /sand paper/grinder machine for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. |
| 105 | Table centre (FD235& FD-274) |
| 106 | (a) Top : S&F for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick postforming prelaminated MDF board exterior grade. Complete all as specfication in drg and directed. |
| 107 | (b) Long Rail : S&F for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood as per drawings complete all as specified and directed. |
| 108 | (c) Short Rail : S&F for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood as per drawings complete all as specified and directed. |
| 109 | (d) Stiffener : S&F for removing U/S Stiffener S&F New Stiffener made out of well seasoned teak wood complete all as specified and directed. |
| 110 | (e) Legs : S&F for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed. |
| 111 | (f) Shoes : S&F for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item all as specified and directed. |
| 112 | (g) Material and Labour for polishing of Table center including scrapping of rough surface and old worn out polished layer with scrapper /sand paper/grinder machine for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. Please Enable Macros to View BoQ information |
