|
| 1 | Construction of Dharmashala & Ambulance Shed For PHC At. Musalwadi Tq. Malegaon Dist. Washim |
| 2 | Item No. 1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means [Bd.A.1 P.No. 259] (S.S.R. I.No. 21.02) |
| 3 | Item No. 2 :- Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation & necessary back filling, ramming, watering including shoring & strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means [Bd.A.2 P.No. 259] (S.S.R. I.No. 21.06) |
| 4 | Item No. 3 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd. E. 1 P.No. 287] (S.S.R.I.No. 24.01) |
| 5 | Item No. 4 :- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.3 P.No. 298 and B.7, P.No.38] (S.S.R.I.No. 25.11) |
| 6 | Item No. 5 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.5 Page No. 300 and B.7, Page.No. 38] (S.S.R.I.No. 25.31) |
| 7 | Item No. 6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.6 Page No. 300 and B.7, Page No.38] (S.S.R.I.No. 25.50) |
| 8 | Item No. 7 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. [Bd.G.2 Page No. 313] (S.S.R.I.No. 27.01) |
| 9 | Item No. 8 :- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. [Bd.A.10 Page No. 262] (S.S.R. I.No. 21.36) |
| 10 | Item No. 9 :- Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. [Bd.A.11 P.No.263 ] (S.S.R. I.No. 21.37) |
| 11 | Item No. 10 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.[Spec.No. :Bd.F.17 Page No 306] (S.S.R.I.No. 26.33) |
| 12 | Item No. 11 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete [Spec.No. :Bd.G.5 Page No. 315] (S.S.R.I.No. 27.05) |
| 13 | Item No. 12 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. [Bd. L.2 P.No. 368] (S.S.R. I.No. 32.04 P.No. 201) |
| 14 | Item No. 13 :- Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete [Bd.L.4 Page No. 368] (S.S.R.I.No. 32.06) |
| 15 | Item No. 14 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Bd.C.2 Page No. 275 (S.S.R.I.No. 23.01 P.No. 167) |
| 16 | Item No. 15 :- Providing & fixing colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing the feed material is manufactured outof nominal 0.45mm base metal thickness (BMT) (0.5mm TCT) Hi-strength steel with min550 MPa yield strength metallic hot dip coated with aluminium -zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with colorbond (R) steel quality super durable polyester paint coat (with inorganic pigment) The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25um exterior coat on top surface & nominal 10um reverse coat on back surface Profile sheet shall have nom 950-1050mm effective cover width & nominal 25-30mm deep ribs with subtle square fluting in the five pan at nominal 180-250mm C/C The end rib shall be designed for anti-capillary groove & return leg The feed material should have coil manufacturers product details marked a regular interval Including fasteners with min fastened with min 25um Zinc-Tin alloy coated Hex head self-drilling screw etc complete (weight of profile 4.52 kg/sqm) (S.S.R.I.No. 38.34 P.No. 227) |
| 17 | Item No. 16 :- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (S.S.R.I.No. 46.19 ) |
| 18 | Item No. 17 :- Providing & fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 80 mm thickness of having a strength of 400 Kg/sqm of approved quality & shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints & cleaning etc. complete (using 100% crushed sand) [Bd. M12 P.No. 385] (S.S.R. I.No. 33.54 P.No. 211) |
| 19 | B) Labour Rate |
| 20 | Item No. 18 :- Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease dirt & other materials as required etc complete [As directed by Engineer incharge] (S.S.R.I.No. 35.24) |
| 21 | Item No. 19 :- Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings & handles on both sides & finishing with oil painting three coats complete. [As directed by Engineer in charge.] (S.S.R.I.No. 39.11) |
| 22 | Item No. 20 :- Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying & stacking the same in PWD chowky or as directed etc. complete. [BD.V 5 P. 551 & as directed by Engineer in charge] (SSR I.No. 42.60) |
| 23 | Item No. 21 :- Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 2500 VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as per specification no. AP-INV (Electrical 22-23 CSR I.No. 3-6-4) |
| 24 | Item No. 22 :- Supplying and erecting 12V/150Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. (Electrical 22-23 CSR I.No. 3-8-4) |
| 25 | Item No. 23 :- Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. (Electrical 22-23 CSR I.No. 2-8-14) |
| 26 | Item No. 24 :- Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (Electrical 22-23 CSR I.No. 1-6-2) |
| 27 | Item No. 25 :- Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) [CD.15 P.No. 168 & B.7. P.No. 38] (S.S.R.I.No. 11.25 P.No. 82 ) |
| 28 | Item No. 26 :- Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete (S.S.R.I.No. 39.28) |
| 29 | Item No. 27 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 200 to 1000 litres [As directed by Engineer- in-charge.] (SSR item No. 42.53) |
| 30 | Item No 28 :- Providing and fixing board displaying information, such as 'Name of work, Name of Contractor, Work completion and liability period etc, having rectangular shape of 0.90mx0.60m size made out G.I. sheet painted with oil paint MS angle of size 50x50x6mm frame with properly MS angles including etc & fixing the boards in C.C. M10 concrete block of size 45cmx 45cm x60cm including excavation refilling transportation & labour etc complete [As directed by Engineer in Charge] (As per rate analysis) Please Enable Macros to View BoQ information |
