|
| 1 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 2 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 3 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, THD < 10% as per IEC 61000-3-2, P.F.≥ 0.95, IP-66, IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15,lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 4 | 100 watt |
| 5 | 150 watt |
| 6 | Supplying, Installation, Testing & Commissioning of LED highbay light fixture having body made of PDC aluminium housing of 80±5% watt with minimum efficacy 150 lm/watt to be install on surface having internal surge protection of 4 KV and external surge protection of minimum 10kv with Short & Open circuit protection ,THD < 10% , P. F. ≥0.95, IP 66, IK 08, CRI >70, life time of minimum 50000 Burning Hours with Minimum 5 year OEM warranty , CCT 4000°K /5700°K. Complete in all respect as required on site. |
| 7 | Supply and fixing of thermoplastic junction box outdoor type weather proof of app. size 130 x 1300 x 77 having protection of IP 65/66/67 with knockouts for cable entry of size upto 6 sqmm with heavy duty connector terminals of same make of thermoplastic junction box. Including terminating of incoming and outgoings in the box. Complete in all rescpect upto the entire satisfaction of EIC. |
| 8 | Supply and fixing of Angle iron bracket of L /T shape of size ( 50 mm X 50 mm X 6 mm ) app .600 mm long and height of 300 mm for installation of floodlight fixture. The bracket should be install on wall with nut, bolt as required to install at the height of 3-5 mtr. And bracket should have primer coat of anti rust with double coat of approved colour (as per approval from EIC). Complete in all respect as required on site. |
| 9 | Supplying, Installation, Testing & Commissioning of LED surface mounted batten of 18±5% watt with minimum efficacy 120 lm/watt , 2700 lumens having internal surge protection of 2.5 KV with Short & Open circuit protection, high transmittance PC diffuser, THD < 10% , P. F.≥0.95, IP65, IK 08, CRI >80, UGR (Unified Glare Rating) < 19, life time of minimum 50000 Burning Hours , CCT 4000°K /5700°K with minimum 05 years OEM warranty.Complete in all respect including dismantling old fixtures as required on site. |
| 10 | Less rebate of old dismantled non usable fixtures Please Enable Macros to View BoQ information |
