|
| 1 | Dismantling brick tiles or terracing tiles, single layer on roofs all as specified and directed by Engineer - in - Charge. |
| 2 | Demolition of mud in roof, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) all as specified and directed by Engineer - in - Charge. |
| 3 | Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge . |
| 4 | M & L cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work etc. all as specified and directed by Engineer - in - Charge . |
| 5 | Supply only liquid waterproofing admixture all as specified and directed by Engineer - in - Charge. |
| 6 | M & L 10mm thick rendering in Cement Mortar 1:3 to roof surfaces, bearing plaster, sunken portion etc. finished even and fair without using extra cement complete all as specified and directed by Engineer - in - Charge. Note:- The rates do not include for the supply of water proofing compound, which shall be paid for in addition at “supplied only rates separately, as applicable. |
| 7 | M & L applying evenly a tack coat of industrial bituman 85/25 @ 1.2 Kg / Sqm on plaster surface including cleaning of surfaces all as specified and directed by Engineer – in – Charge |
| 8 | M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over and including priming surfaces with primer as per manufactures instructions and laid by forced application complete all as specified all as specified and as directed by Engineer-in-Charge. |
| 9 | M & L for Cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry in floors, cut and polished as in floors over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed by Engineer - in - Charge . |
| 10 | Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge. |
| 11 | M & L for rendering 15 mm thick on fair faces of brick wall finished fair & even in CM 1:4 complete all as specified and directed.(The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto G+5 storey bldg) complete all as specified. |
| 12 | M & L applying two coat of cement base paint on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge |
| 13 | S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge . |
| 14 | S & F 20mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge . |
| 15 | Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge. |
| 16 | Taking down steel tubing 20mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge. |
| 17 | S&F in repairs 1000 ltrs capacity rotational moulded polyethylene water storage tanks ( cylindercal vertical and closed top) hoisted and fixed in position all as specified in SSR Part I complete all as directed. |
| 18 | Disconnecting existing tanks of 1000 ltr, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re fixing in position etc complete all as directed. |
| 19 | S & F in repair ball brass valve 20mm bore dia high pressure with polythene float and fly nuts complete screwed with iron pipe and fixed all as specified and directed by Engineer - in - Charge . |
| 20 | Demolition and breaking upto 100mm bore drain pipes (salt glazed ware/ PVC or AC pipe) set in cement mortar and taking out all as specified and directed by Engineer - in – Charge. |
| 21 | S & F PVC pipes (SWR) single socketed with rubber ring joints 110mm dia fixed to wall complete all as specified and directed by Engineer - in - Charge . |
| 22 | S&F PVC (SWR) bends any radius bore of 110 mm all as specified and directed by Engineer - in - Charge |
| 23 | S & F 75 mm dia PVC (SWR) bends any radius with acess door complete all as specified. |
| 24 | Supply and fix PVC (SWR) TEE 110 mm dia complete all as specified and directed. |
| 25 | Supply and fix PVC (SWR) TEE 75 mm dia complete all as specified and directed. |
| 26 | Supply and fix PVC (SWR) TEE REDUCER 150MM*110MM dia complete all as specified and directed. |
| 27 | Supply and fix PVC (SWR) TEE REDUCER 100MM*75MM dia complete all as specified and directed. |
| 28 | Supply and fix PVC (SWR) elbow 110 mm dia complete all as specified and directed. |
| 29 | Supply and fix PVC (SWR) elbow 75 mm dia complete all as specified and directed. |
| 30 | Dismantling wrought iron or mild steel work of any description all as specified and directed by Engineer - in - Charge . |
| 31 | S & F mild steel as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets etc. complete of and similar work conforming to Fe 410-W (Gde E- 250 ), quality-A, all as specified and directed by Engineer - in - Charge. |
| 32 | M & L providing two coats of synthetic enamel paint and a coat of red oxide primer on new steel surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge . |
| 33 | Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing debris from the site complete all as specified. |
| 34 | Brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class 'B' bricks (old size bricks) complete all as specified and as directed. |
| 35 | M&L for 75mm thick cement concrete1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified.. |
| 36 | M & L for chequered cement concrete designer prepolished glossy finished tiles 20cm x 20cm x 25mm thick with grey cement and pigments, heavy duty, set jointed and pointed in neat cement slurry and pigments as in floors over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed by Engineer - in - Charge. |
| 37 | S&F factory made Pre-cast RCC (not less than M-35 concrete) manholes covers of size 300mm X 300mm X 100 mm thick duly fixed on manhole/gully trap opening in CM (1:4), complete all as specified. |
| 38 | S&F factory made Pre-cast RCC (not less than M-35 concrete) manholes covers of size 450mm X 450mm X 100 mm thick duly fixed on manhole/gully trap opening in CM (1:4), complete all as specified. |
| 39 | S&F of Factory made Pre-cast RCC (not less than M-35 concrete) manholes covers of size 600mm X 600mm X 100 mm thick duly fixed on manhole/gully trap opening in CM (1:4), complete all as specified. |
| 40 | S&F of Factory made Pre-cast RCC (not less than M-35 concrete) manholes covers of size 900mm X 450mm X 100 mm thick duly fixed on manhole/gully trap opening in CM (1:4), complete all as specified. Please Enable Macros to View BoQ information |