|
| 1 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 2 | S&F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium frame for doors, Windows, Ventilators, Cupboards with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 3 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium door shutters, Cupboards aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and as directed by Engr-in-Charge |
| 4 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc., complete all as specified and directed by Engr-in-Charge |
| 5 | S &F Powder Coated ( minimum thickness of Powder coating 50 Microns) aluminium window and ventilator shutters, Side hung type without sash, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) etc., complete all as specified and as directed by Engr-in-Charge |
| 6 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minium anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. |
| 7 | Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 9 | Supply only 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame complete all as specified and as directed. |
| 10 | Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 11 | Supply only 4mm thick ACP (Aluminium Composite panel) fixed to aluminium frames/ shutters for complete all as specified and as directed by Engineer in Charge. |
| 12 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type c-21 75mm Size complete all as specified and as directed. |
| 13 | S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 14 | S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed. |
| 16 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 17 | M & L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat in Cm 1:3 all as specified and as directed by Engg-in-Charge |
| 18 | Taking down cement plaster of any description from wall including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 19 | Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 20 | Providing and applying plaster of paris putty of 1mm thickness over newly plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 21 | M & L for two coats of Oil bound distemper over a coat of primer on newly plastered surfaces of walls including nesessary preparation of surfaces complete all as specified and as directed. |
| 22 | Demolition of PCC in Ground floor or paving n exc 15 cm thick above or below groung level complete all as specified and as directed. |
| 23 | M&L for 100mm thick PCC 1:3:6, type C2 (using 40mm graded broken stone aggregate) as in sub base, Sub Floors & Floors complete all as specified and as directed. |
| 24 | Taking down chowkats or frames exc. 1.5 Sqm but n exc 4.0 Sqm each with shutters (without taking off shutter from the frame) including cutting holes to facilitate the taking down, inserting hold fast while provision and making good disturbed surfaces in CM 1:3 or PCC 1:2:4, type B-1 as required, complete all as specified and as directed |
| 25 | Taking down shutters of any description exc 1 Square metre and n.exc 2 Square metre each complete all as specified and as directed. |
| 26 | Taking down and Refixing in the same opening of shutter of any description exc 1 Sqm and n exc 2 Sqm each including easing and adjusting as required complete all as specified and as directed. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other Frames/chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minium frame density of 750 kg/Cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minium compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of bearing termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in- Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(Note:- For WPC soild door/Windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.) |
| 28 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other Frames/chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minium frame density of 750 kg/Cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minium compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of bearing termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately. Note:- For WPC soild door/Windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.) |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) Solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulud of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 30 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face with Particle board Core, in frame at site as per specification & drawing. |
| 31 | Supply and fix factory made Wire gauzed PVC solid wood grain printed door shutter 30mm thick (style) i.e panel will be of wire gauze in lieu of single prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S tubes. The wire gauze shall be stretched to tighten firmly consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles with suitable PVC sheet beading, and joined together with solvent cement, in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge. |
| 32 | Cutting holes for inserting hold fasts in PCC block masonry built in cement mortar and making good disturbed portion in PCC 1:2:4 type B1 or in cement mortar 1:3 as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed by Engineer-in-charge. |
| 33 | S&F Aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified and as directed. |
| 34 | S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and as directed . |
| 36 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long all as specified complete all as specified and as directed. |
| 37 | S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed. |
| 38 | S&F floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 39 | S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 40 | S&F in repairs Aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified and as directed. |
| 41 | Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 42 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,[ Hardware :Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 43 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. [Hardware : Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories complete all as specified and as directed. Net opening will be measured for payment purpose) |
| 44 | Providing and fixing factory made uPVC white color Casement (Openable) Door made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 58mm). sash (60mm x 78mm). T Profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35 mm x 20mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (28mm x 21.5mm), Sash (31mm x 27mm), T profile (27 mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. [Hardware : Casement door handle made of zinc alloyed (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with strikes, 3D Hinges of Zinc alloyed (White powder coated) and 5mm thick glazing with selected quality glass] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 45 | Supply only 5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares but exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 46 | Supply and Fix in repairs Stainless Steel railing, (SS 316 grade) of safety railing consists of vertical and horizontal bars of thickness not less than 2.0mm, welded to base plate , MS plate, maintenance free, corrosion resistant, aesthetic looking stainless steel extruded sections complete all as specified and as directed by Engineer-in-charge. |
| 47 | M&L for anodised aluminium snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle including cutting, drilling, jointing etc complete including provn of 3.15mm dia GI wire suspenders fixed with adjustable connectors and providing 4mm thick Eco Boards (decorative type) 600mm x 600mm size duly applied with incl dismantling existing ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets/ frames of any description, complete all as specified and as directed. |
| 48 | S&F in repair ECO board 600x600x4mm thick decorative type fixed in existing aluminium grid frame work for false ceiling incl two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 49 | S&F in repairs Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. |
| 50 | S&F in repairs aluminium composite panel sheet of 3 to 4 mm thick as in wall cladding & false ceiling, fixed on aluminium frame work with plastic strips ( double sided sticker) of suitable size of varying thickness of 10mm to 30 mm , applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. (Note : Necessary frame work if any will be measured and paid separately) |
| 51 | S&F in repairs Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 52 | S&F in repairs Stainless steel 20mm dia best quality decorative type curtain rod complete all as specified and as directed. |
| 53 | S&F in repair Stainless steel curtain brackets with holder for 20mm dia curtain rod decorative type complete all as specified and as directed. |
| 54 | S&F as in repairs aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed. |
| 55 | S & F in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed. |
| 56 | S & F in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed. |
| 57 | S&F in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and as directed. |
| 58 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 59 | S&F in repairs 4mm thick ACP board (Aluminium composite panel) fixed to aluminium frames complete all as specified and as directed by Engineer in charge. Please Enable Macros to View BoQ information |
