|
| 1 | B/R PORTIONS&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 2 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 3 | De-watering from the existing service water tanks of capacity exc 250 ltrs and n.exc 500 ltrs kept over roof slab/staging of any height and cleaning internal surfaces of tanks to remove the deposited scales, dirt, mud and other foreign materials, rubbing with water using coir/jute brushes and washing the surfaces with fresh water, cleaning the inner surfaces with mixture of bleaching powder and water and finally washing with fresh water including taking down existing float valve and re-fixing the same in position after cleaning including writing TANK CLEANED ON (date) on the outer surface of tank complete all as specified and directed. |
| 4 | All as per item herein above but exceeding 500 ltr and not exceeding 1000 ltr in capacity complete all as specified and directed. |
| 5 | Taking down 15mm bore steel water tubing and connections complete all as specified and directed. |
| 6 | S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 7 | Taking down 20mm bore steel water tubing and connections complete all as specified and directed. |
| 8 | S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 9 | S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete all as specified and directed. |
| 10 | S&F for 16mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete all as specified and directed. |
| 11 | M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed. |
| 12 | Material and labour for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed. |
| 13 | Material and labour for brass elbow (brass insert) of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed. |
| 14 | Material and labour for union of 20mm bore complete including taking down old unserviceable valve complete all as specified and directed. |
| 15 | S&F in repairs 75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 16 | S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 17 | S& F in repairs 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 18 | S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed. |
| 19 | S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete complete all as specified and directed. |
| 20 | S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 21 | S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed. |
| 22 | Hacking out old unserviceable glass / broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size complete all as specified and directed. |
| 23 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 24 | S&F 5.50 mm thick tinted glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden or aluminium frame in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 25 | Ditto all as per item herein above but Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed. |
| 26 | S&F in repairs low density polyethylene(LDPE) pipes for working pressure rating 6 Kgf / Sqcm with polyethylene thread union and check nuts for waste pipe of WHB, 750 mm long, 32 mm dia complete all as specified and directed. |
| 27 | S&F in repairs 40 mm dia, 75 cm long PVC low density waste pipe for stainless steel sink of working pressure rating @ 4 Kg / Sqcm with polyethylene union and check nuts complete all as specified and directed. |
| 28 | S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed. |
| 29 | S&F in repairs 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed. |
| 30 | S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 31 | S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 32 | S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete incl fillets for securing wiremesh complete all as specified and directed. |
| 33 | S&F wooden fillets /beading (any size) for securing wiremesh to steel /wooden frame/window and similar work and removing old beads complete all as specified and directed. |
| 34 | S&F in repairs 15 mm bore, 45 cm long PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed. |
| 35 | S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 36 | S & F chromium plated faucet health (hand jet) 15mm bore with fittings, and accessories complete all as specified and directed. |
| 37 | S&F in repairs 15mm dia bore, two way bib cock C.P with wall flange, screwed down for uPVC/iron Pipe complete all as specified and directed. |
| 38 | S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with fancy type chromium plated for iron pipe or for unions angle cock complete all as specified and directed. |
| 39 | S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 40 | S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 42 | S&F 600 mm x450 mm beveiled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and washers as in repairs complete all as specified and directed. |
| 43 | S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified and directed. |
| 44 | S&F in repairs 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in repairs 15 mm bore Brass CP spindle with cap for mixer tap, taps , stop cock, pillae tap complete all as specified and directed. |
| 46 | Taking down cement plaster from brick / concrete/ stone surfaces including racking out joint , hacking for key and scrubing down with water etc all as complete all as specified and directed. |
| 47 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over average 3 mm thick wall care putty complete all as specified and directed. |
| 48 | M&L for Rendring 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finishing surfaces even and smooth w/o using extra cement complete all as specified and directed. Note : 1. mixed with water proofing compound @ 3% by weight of cement complete all as specified. 2. Water Proofing compound shall be measured and paid for seprately as \\"Supply Only\\" |
| 49 | M&L for rendering 10 mm thick on concrete surfaces or surfaces other than fair face of brick work in CM 1:6 finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L for Preparation of old distempered surfaces of wall and applying one coat of oil bound distemper at etc complete all as specified and directed. |
| 51 | All as per item herein above but on ceiling surfaces complete all as specified and directed. |
| 52 | M&L preparation of newly plastered surface of walls over 10 cm width or girth over a coat of approved primer and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed. |
| 53 | M&L for one coats of white wash, on old surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 54 | M&L for one coats of white wash, on old surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 55 | M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 56 | M&L for Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and directed. |
| 57 | M&L French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed. |
| 58 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed. |
| 59 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed. |
| 60 | Taking down shutters of any description, area not exc.1 sqm each complete all as specified and directed. |
| 61 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and directed. |
| 62 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and directed. |
| 63 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed. |
| 64 | S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round complete all as specified and directed. |
| 65 | S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed. |
| 66 | S & F Steel ventilator with top hungshutter including hinges, steel pegstay complete all as specified and directed. |
| 67 | S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 68 | S & F for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed . |
| 69 | S & F for pressed steel frames of size 165 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed . |
| 70 | M & L for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 71 | M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 72 | S & F aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 73 | Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. |
| 74 | S&F in repairs 18mm thick Medium density fibre block board, exterior grade, fixed to timber screws framework with interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed. |
| 75 | S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 76 | S&F extruded aluminium alloy handles, fabricated type, anodized of size 125 mm complete all as specified and directed. |
| 77 | S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed. |
| 78 | Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 79 | M&L machine cut Granite slab 20 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and directed.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish complete all as specified and directed. |
| 80 | Dismantling floor or wall tiling incl cement mortar bedding ( but not backing) removing serveaceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 81 | M&L 25mm thick PCC 1:2:4 type B-0( wing 12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed. |
| 82 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 83 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 84 | M & L for Vitrified colour Light shade Ceramic tiles 10 mm thick (square/ rectangular) dark shade /ultracharged polished,Light shade area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. |
| 85 | S&F, glazed ceramic tiles coloured 350 x 250mm/450 x 350mm 7 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed. |
| 86 | S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and directed. |
| 87 | S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 88 | S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 89 | S & F toilet paper holder of brass chromium plated, complete all as specified and directed. |
| 90 | S&F in repairs sink made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed. |
| 91 | S & F in repairs soap dish chromium plated of size 100 x 100 mm any type, chromium plated brass screws complete all as specified and directed. |
| 92 | S & F in repairs kitchen sink waste couplings size required at site etc. complete all as specified and directed. |
| 93 | S & F in repairs wash hand wash basin waste couplings size required at site etc. complete all as specified and directed. |
| 94 | S&F in repair for vitreous China wash basin, white, flat back, size 550x450mm including necessary brackets, cp couplings, pvc waste pipes etc. complete all as specified and directed. |
| 95 | Supply & fixing PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, fixed as in repairs complete all as specified and directed. |
| 96 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws complete all as specified and directed. |
| 97 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed. |
| 98 | S & F cloth hangaer stainless steel ,anti rust , having extra strength to hang items without bending set in door/wall ,06 pin hook ,30 cm long for hanging cloth ,towel etc length incl screws, fixed as in repair complete all as specified and directed. |
| 99 | S & F in repairs for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed. |
| 100 | Supply & fixing stainless steel plate rack, made out of 1.00mm thick sheet of size 75 cm x 75 cm fixed as in repairs complete all as specified and directed. |
| 101 | Demolition and beaking up drain AC/PVC pipes set in cement mortar 100 mm and below complete all as specified and directed. |
| 102 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 110 mm complete all as specified and directed. |
| 103 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, bore of the pipe 75 mm complete all as specified and directed. |
| 104 | S&F in repairs 25mm dia stainlesss steel rods corrugated of approved quality complete all as specified and directed. |
| 105 | S&F in repairs stainlesss steel decorative end brackets suitable for 25mm dia pipes complete all as specified and directed. |
| 106 | Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete of any thickness, gravels etc. and removing the debries out side MD land complete all as specified and directed. |
| 107 | M & L for PCC 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in roof surface complete all as specified and directed. |
| 108 | M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as \\"Supply Only\\" |
| 109 | Supply only water proofing compound complete all as specified and directed. |
| 110 | Provding and carry out water proofing treatment to sound, moisture free concrete surface system includes preparation to remove loose dust, dirt, loose mortor, curing compound etc carry out cementious injction grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticised expandive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortor prepare by using Nitobond SBR latects, application of polymer modified battaat floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementious grouts. Andulated surface and npot hole shall be treated with epoxy mortor or putty to obtained sound/levelled surface. Application of primer Nito proof WB primer on sound mortor slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurithane coating supplied in 25 kg drum coverage @ 2.30 Kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufactures specification. Coating shall be having crackbriding of 2 mm, elonagtion (ASTMD 124 ) greater than 600 percentage, tensile strength (ASTM D412), 95 percenatge, 85 percentage of solid contantents, tear resistance (ASTM D624),15 KN/M, shore A hardness (ASTM D 2240), 60, water vapour transmission not more than 1 gm /M2, water permeability (DIN-1048) -NIL, services temperature -40'C to 70 degree 'c, flash point greater than 70 'C HSE guidelines:- It is recommanded to provide adequate general and local exhust ventillations, providing protection to Eye,face,Hand andother skin by wearing appropriate glouse, google, face cilid, respiratory protection etc, directed in SDS of the product . |
| 111 | M & L for 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 112 | Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL complete all as specified and directed. |
| 113 | S&F in repairs readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. |
| 114 | Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed. |
| 115 | S & F Continuous (piano) hinges,40 mm width of flange mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 116 | Dismantling structural steel work incl door , gate etc complete all as specified and directed. |
| 117 | S & F non structural steel work in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed [conforming to Fe-290 (Gde- E-250, quality A)]. |
| 118 | M&L for preparation of old surfaces of manglore tiles roofs including repair/replacement of broken manglore tiles wherever required by removing dust, dirt, mosand making good roof surface etc and applying one coat of weather resisant acrylic exterior emulsion paint of approved make, completed all as specified and as directed. Note . The coulour scheme of the painting will be as decided by Engr-in-Charge |
| 119 | M&L for preparation of Interior wall surface,or any waterfall area including removing all fungus,dirt,grease and patches and drying surfaces and filling cracks if any with crack filler and appling two coats antifungal damp proof coating with time difference of min 04 hrs make Asian /Dr Fixit Sure seal or equilient making surface ready to receive final surface finish area of applying two coats 1.50 Sqm per Kg material in horrizontal and vertical aplication and as per manufacturers instructions/specifiaction and directed by EIC. |
| 120 | Preparation of old decorated surfaces of walls/roof projection/chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply Two coats of external waterproof emulsion paint Apex Ultima or equivalent with primer including necessary scaffolding required for painting work & safety measures at any height of bldg complete all as specified and directed. |
| 121 | Preparation of old decorated surfaces of walls/roof projection/chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply One coats of external waterproof emulsion paint Apex Ultima or equivalent with primer including necessary scaffolding required for painting work & safety measures at any height of bldg complete all as specified and directed. |
| 122 | M&L for preparing old painted surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on bricks, kerb stone , stone , concrete surfaces, asbestos cement or plastered surfaces complete all as specified and directed. |
| 123 | Preparation of old decorated surface of any description over 10 cm width or girth, walls , soffits/facia of chajja/roof slab etc and applying one coat of cement base paint at any height of bldg including necessary scaffolding required for painting work, safety measures complete all as specified and directed. |
| 124 | E/M PORTIONTaking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 125 | E/M PORTIONTaking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed. Please Enable Macros to View BoQ information |
