|
| 1 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of oil Bound Distemper of any light shade complete all as specified and directed. |
| 2 | Same as item No 1 above but on ceiling surfaces. |
| 3 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured & paid separately |
| 6 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. |
| 7 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 10 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed. |
| 11 | M&L for applying two coats of oil bound distemper on wall or concrete surfaces over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 12 | M&L for applying two coats of oil bound distemper on ceiling on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 13 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 14 | Preparation of old surfaces of ceiling and applying two coats of white wash. |
| 15 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 16 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified as directed. |
| 17 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 18 | M&L for writing letters (6cm height) or figures (Block Roman, Italic or Indian) not exceeding 30 cm heights with synthetic enamel paint including preparing of old painted sufrace complete all as specified and directed. |
| 19 | M & L preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 20 | M & L complete removal of existing surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced by eng in charges. |
| 21 | M&L for complete removal of existing surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade as New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by eng in charge. |
| 22 | M&L for prepartion of new surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by eng in charge. |
| 23 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed. |
| 24 | Dismantling of floor, hearth or walls tiles incl cement mortar bedding but not backing and rubbish off permises all as specified. |
| 25 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 26 | M&L for Treatment of soil under existing floors Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed. |
| 27 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors omplete all as specified and directed. |
| 28 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in cement with colured pigments to match shade complete all as specified & directed. |
| 29 | M&L for 10mm thick Light shade vitrified ceramic tiles, not exceeding 0.36 sqm as in vertical surface skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in cement with colured pigments to match shade complete all as specified & directed. |
| 30 | M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in cement with colured pigments to match shade complete all as specified & directed. |
| 31 | M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in cement with colured pigments to match shade complete all as specified & directed. |
| 32 | M&L for glazed ceramics coloured tiles of size (350x450x7) /350x250x7/300x450x7 mm thick in vertical surfaces such as skirting/dados/wall,including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. set and jointed in neat cement slurry and pointed in cement with colured pigments to match shade complete all as specified & directed. |
| 33 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed. |
| 34 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed. |
| 35 | M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed. |
| 36 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone agg) in fdn, sub base, mass concrete etc. complete all as specified and directed. |
| 37 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete all as specified and directed. |
| 38 | M&L for RCC 1:1.5:3 A-1 type (using 20 mm graded stone aggregate) as in kitchen platform, shelves, chajja, including necessary form work complete all as specified and directed. |
| 39 | M&L Preparing old painted surfaces of walls, chajjas etc by washing, rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 40 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 41 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 42 | All as above item No 41 but exc 1.5 Sqm and n exc 4 Sqm each. |
| 43 | Taking down shutters of any description exc 1.00 Sqm and n exc 2Sqm each complete all as specified and directed. |
| 44 | M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick and n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed. |
| 45 | S & F 30 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door etc complete, size of member of shutter complete all as specified and directed. |
| 46 | S & F of 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed. |
| 47 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 48 | S&F steel windows with side hung shutters including hinges with MS handles and tower bolts pegstay, hold fast complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 49 | S&F steel windows with side hung shutters including hinges with MS handles and tower bolts hold fast complete without glazing bar & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified. |
| 50 | S&F steel ventilators with top hung shutters including hinges, steel peg stay hold fast including taking down existing ventilators complete all as specified and directed. |
| 51 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 52 | S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 53 | S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 54 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 55 | S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid complete all as specified and directed. |
| 56 | S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 57 | S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 58 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed. |
| 59 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 60 | S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 61 | S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 62 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 63 | S&F 100 mm extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 64 | S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete all as specified and directed. |
| 65 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 66 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 67 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed. |
| 68 | S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 69 | S& F 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 70 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 71 | S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed. |
| 72 | S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 73 | S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish complete all as specified and directed. |
| 74 | S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed. |
| 75 | S&F in repair 2 lever aluminium cupboard lock grade-I size 100 mm etc complete all as specified and directed. |
| 76 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 77 | S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. |
| 78 | S&F in repair anodised aluminium alloy 20 mm dia curatin rod including brackets as approved complete all as specified and directed. |
| 79 | S&F 5.5mm thick looking mirror selected quality glass n.exc 0.50Sqm each and fixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass complete all as specifed and directed. |
| 80 | Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed. |
| 81 | Taking up or down steel tubing and connections, of 20 mm dia complete all as specified and directed. |
| 82 | S&F steel Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia bore complete all as specified and directed. |
| 83 | S&F steel Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia bore complete all as specified and directed. |
| 84 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed. |
| 85 | S&F aluminium partition wall with following specificaiton complete all as specified (a) Member with Single side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(b) Member with Both side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(c) Partialy 5mm thick Aluminium Composite Seat decorative(d Partialy 5 mm thick tinted glass.(e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.(f) Size of Pannel should not greater than (1.2m x1.2m) |
| 86 | S & F in repair aluminium door shutter with following specification:-(a) chowkhat frame of size 63.50x38.10x1.95mm thick weight @ 1.092Kg/RM.(b) Style/Vertical member of size 47.62 x 44.45 x 2.02 mm thick weight @ 1.052Kg/RM(c) Top member of size 47.62 x 44.45 x 2.02 mm thick weight @ 0.974(d) Bottem member of size [email protected]/m(e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket.(f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips(g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter.(h) Aluminum and PVC beading as per requirment as in fixing for ACP shhet & Glass, jointing cleat including locking arrangement. etc. |
| 87 | S & F in repair aluminium window sliding shutter three track with following specification:-(a) chowkhat frame bottem member of size 92x31.75x1.50mm @ 1.248Kg/RM.(b) chowkhat frame Top & side members sides and member of size 92x31.75x1.50mm @ 1.060Kg/RM.(c) Shutter sides members of size [email protected]/RM(d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment.(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc |
| 88 | S & F in repair 15 mm dia Central hole basin mixture with 450mm braided connection pipe (without pope up) Quarter Turn including all necessary fittings as approved complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015454 or equivalent make as approved by GE |
| 89 | S & F in repair 15 mm dia sink mixture (Wall Mounted) with 190 mm long swivel spout connection legs and wall flanges all necessary fittings as approved complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015501 or equivalent make as approved by GE |
| 90 | S&F in repair chromium plated wall mixer with \\"L\\" Bend pipe for overhead shower with wall flange complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015401 or equivalent make as approved by GE |
| 91 | S&F in repair bib tap 15 mm with wall flange and aerator for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015151 or equivalent make as approved by GE |
| 92 | S&F in repair pillar cock with swan neck spout left and aerator tap 15 mm bore fancy type chromium plated, screwed for iron pipe complete all as specified.Make - Cera Series VICTOR Cat Part No-F1015154 or equivalent make as approved by GE |
| 93 | S&F in repair angle cock 15 mm with wall flange screwed for iron pipe complete all as specified and directed.Make - Cera Series VICTOR Cat Part No-F1015201 or equivalent make as approved by GE |
| 94 | S&F in repair two way angle cock with side handle 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make - Cera Series VICTOR Cat Part No-F015211 or equivalent make as approved by GE |
| 95 | S & F in repair chromium plated corner glass shelf of size 150 x 150 mm with brackets complete all as specified and directed.Make - Cera Series VICTOR Cat Part No-F015361 or equivalent make as approved by GE |
| 96 | Easing of steel window of glazed & gauzed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed. |
| 97 | Easing of wooden door/ window shutter (Panelled or skelton) and make it functional complete all as specified and directed. |
| 98 | Easing of Aluminium window of glazed & gauzed shutters including small fittings if required and make it functional complete all as specified and directed. |
| 99 | Easing of Aluminium Door of glazed shutters including small fittings if required and make it functional complete all as specified and directed. |
| 100 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 914 x 786 x 254 mm size fixing with wooden plug with suitable size of screws complete all as specified.Make :Prayag PSP-21 or or Equivalent as approved by GE |
| 101 | S&F rubber gasket for door sealing complete all as specified and directed. |
| 102 | S&F in repair ABS health faucet with Health Faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe 1.0 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.Make - Cera Series DRIBBLE Cat Part No-F8030103 or equivalent make as approved by GE |
| 103 | S&F in repairABS Overhead shower square 100 x 100 mm (4” x 4”)with 200 mm (8”) complete all as specified and directed.Make - Cera Cat pt No 7010115AB or equivalent make as approved by GE |
| 104 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall complete all as specified and directed.Make-Parryware Slimline SINGLE FLUSH E 8333 or Equivalent in CERA as approved by GE. |
| 105 | S&F in repair vitreous china WHB size450x350x195 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.Make-Cera CANON Cat. No. S2040102 or equvalent in parryware as approved by GE. |
| 106 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 107 | S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed. |
| 108 | S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. |
| 109 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 110 | S&F in repair brass CP steel tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange aluminium anodised complete all as specified and directed. |
| 111 | S&F in repair Stainless steel soap dish of size 300 x 150 mm etc fixed to wall with screw complete all as specified and directed. |
| 112 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 113 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed. |
| 114 | S & F in reapir chromium plated toilet paper holder with flap complete all as specified and directed. |
| 115 | M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete. |
| 116 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. |
| 117 | Taking down PVC/AC pipes upto 110mm bore (including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed. |
| 118 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 119 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 120 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 121 | M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed. |
| 122 | M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed. |
| 123 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 124 | S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed. |
| 125 | Dismantling water tanks of capacity exc 250 and n exc 500 ltrs capacity complete all as specified and directed. |
| 126 | Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs capacity complete all as specified and directed. |
| 127 | S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 128 | Same as item No. 127 above but 1000 Ltrs capacity. |
| 129 | S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed. |
| 130 | S & F in 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 131 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 132 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 133 | Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank \\"Tank cleaned on ____ Dt_____\\". Capacity 500 Ltrs complete all as specified and directed. |
| 134 | All as per item No 133 above but of capacity 1000 litres. |
| 135 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed. |
| 136 | M&L 10 mm thick rendering on roof surfaces/concrete surface in cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
