|
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed by Engr-in-Charge. |
| 2 | M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M & L brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 5 | M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces on walls, finished even and smooth without using extra cement in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for rendering 12mm thick in CM 1:4 on stone wall surfaces fair faces of brick work & finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed. |
| 8 | Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and preparation for next treatment complete all as specified and directed. |
| 10 | M&L for 1mm thick wall care putty on walls surface incl prepare to surface for next treatment complete all as specified and directed. |
| 11 | M&L for prepration of old surfaces of ceilling and applying two coat of white wash complete all as specified and directed. |
| 12 | Material and labour for existing prepared surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 13 | Material and Labour for applying Two coats of 100% Premium exterior acrylic emulsion paint (Any shade) on new/old wall surfaces latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as spcified and directed. |
| 14 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on existing prepared walls surface complete all as specified and directed. |
| 15 | M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 18 | M&L for polished /matt finished colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado , skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed. |
| 19 | M&L for Glazed ceramic coloured tiles 7-8 mm thick in vertical surface exceeding 0.12 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge. |
| 20 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. and Laid bedded and pointed in any mortar complete all as specified and directed |
| 21 | M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge. |
| 22 | M&L kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over rendering back of tile 10 mm CM 1:4 complete all as specified& directed by Engr-in-Charge. |
| 23 | M&L for rounding to edges of stone/granite slabs one edge such as in steps cooking platform , window cill and other situations complete all as specified & directed. |
| 24 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete complete all as specified and directed. |
| 25 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge. |
| 26 | M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed. |
| 27 | Material and labour for polished /matt finished colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 28 | Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 29 | M&L for 75 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub base complete all as specified& directed by Engr-in-Charge. |
| 30 | M&L for machine cut kota stone slab flooring 18-20mm thick and area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge. |
| 31 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed |
| 32 | M&L for 75 mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed. |
| 33 | Taking down chowkhats (without taking off shutters from the frames) chowkatts n exc 1.5 sqm each complete all as specified & directed by Engr-in-Charge. |
| 34 | Taking down chowkatts (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified & directed by Engr-in-Charge. |
| 35 | Taking down shutter of any decription exc.1Sqm and n.Exc 2 Sqm complete all as specified & directed by Engr-in-Charge. |
| 36 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for three/two tracks shutters, frames,grills, doors, windows, ventilators and partitions (Fixed portions), slinding windows,ventilators including providing and fixing hinges/ pivots/rollers and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 37 | Supply only 4 mm thick glass sheet any shade tint glass, ordinary quality and glazing with rubber bedding in square & any size in each pane complete all as specified & directed by Engr-in-Charge. |
| 38 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified and directed. |
| 40 | S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed. |
| 41 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed. |
| 42 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 43 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 44 | Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 45 | S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 46 | S&F extruded aluminium alloy handles 150mm size fabricated type anodised complete all as specified and directed. |
| 47 | S&F 250 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified and directed. |
| 48 | Dismantling timber scantlings unframed 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 49 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed. |
| 50 | M&L for Stairs (framed) including stringers , treads, landing , balusters, hand rails etc , cooler stand including cleats brackets, etc complete with gusset plate , rails braces etc. complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge. |
| 51 | M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed. |
| 52 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 53 | M&L Pre-painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 54 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 55 | Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge. |
| 56 | S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge. |
| 57 | Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 58 | S&F for CPVC PIPE OUTER DIA 20MM Brass Elbow (3/4 X ½) complete all as specified and directed |
| 59 | Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge. |
| 60 | S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge. |
| 61 | Taking up or down 25mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge. |
| 62 | S&F 25mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge. |
| 63 | M& L for Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed. |
| 64 | Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I |
| 65 | Supply and fixing in repair 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I |
| 66 | S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engr-in-Charge |
| 67 | S&F in repair for 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 68 | S&F in repair for 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 69 | Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar upto 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed. |
| 70 | S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed. |
| 71 | S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed. |
| 72 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 73 | S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 74 | S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed. |
| 75 | S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal |
| 76 | S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal |
| 77 | S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed. |
| 78 | S&F, 110mm bore PVC vent cowl complete all as specified and directed. |
| 79 | M&L, in repair, PVC (SWR) Gully trap 125/100mm ssetting and jointing with cement mortar (1:1) complete all as specified and directed. |
| 80 | S&F, in repair, PVC (SWR) floor trap, with SS grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed. |
| 81 | S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed. |
| 82 | S&F in repair fancy type long body bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge. |
| 83 | S&F in repair angle valves/stop valve ,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge. |
| 84 | S&F in repair fancy type Pillar tap,swan neck cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed. |
| 85 | S&F in repair sink cock faucet wall mounted chromium plated and suitable screwed for iron pipes of 15mm bore GI pipe all as specified complete all as specified & directed. |
| 86 | Demolition of old existing unserviceable Indian type WC and S&F vitreous china squatting pan of pattern 'long pan' size 580mm white (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. |
| 87 | S&F, in repair, vitreous china wash basin, white, flat back of size 450mm x300mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. |
| 88 | S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified & directed by Engr-in-Charge. |
| 89 | S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. |
| 90 | S&F in repair tubular towel rail, stainless steel, 20mm dia, ‘D’ type, 60cm long between flanges fixed to wall complete all as specified and directed. |
| 91 | S&F in repair kitchen sink without draining board bowl size 18\\"x16\\"x8\\" inch of made out of stainless steel heavy duty with plugs, washers and waste pipe including waste coupling and waste pipe complete all as specified & directed by Engr-in-Charge. |
| 92 | S&F stainless steel Kitchen plate rack of overall minimum size 750mm x 750mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 4.00 Kg. |
| 93 | S&F in repair stainless steel curtain rod of 25 mm dia (in lengths as directed) heavy duty with decorative ball type side brackets supporting hook etc , both ends and pair with PVC rawl plug & steel screws on walls/beam complete all as specified and directed. |
| 94 | S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed. |
| 95 | Supply and fixing in repairs brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed. |
| 96 | Dismantling Wall and ceiling boards including framework (PVC penelling incl fillet, fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specifiedand directed. |
| 97 | M&L for non asbestos fibre reinforced designer cement board false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c all as per manufactures instructions etc complete all as specified and as directed. |
| 98 | S&F in repairs vitreous china counter top/down basin size 450 x 525 x 195 mm shape oval including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed. |
| 99 | S&F in repair 18mm thick PVC hollow board both side prelaminated of approved texture as in kitchen cabinet/cupboard ( with shelves and partions) including frame , beading and necessary fittings & fixture like auto closing concealed hinges, 150mm long fancy SS handle, magnet catch etc as per manufacturers instructions. |
| 100 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed |
| 101 | S&F for Clear Transparent Acrylic Sheet 5mm Thick solid fixed to aluminium shutter complete all as specified and directed Please Enable Macros to View BoQ information |
| 102 | S&F for Clear Transparent Acrylic Sheet 5mm Thick solid fixed to aluminium shutter complete all as specified and directed Please Enable Macros to View BoQ information |
