Tender For Repair Of Hsvp Officer Staff Qtr. No.609-A In Hsvp Officer Colony In Sector-6, Panchkula Including Maintenance And Defect Liability Period Of One Year Free Of Construction (A/Mtc. Of Officers Residences In Sector-6, Panchkula), Panchkula-Haryana
TDR : 56175618
Tender Notice
BOQ
2 Days Left
Panchkula
Haryana
Tender For Repair Of Hsvp Officer Staff Qtr. No.609-A In Hsvp Officer Colony In Sector-6, Panchkula Including maintenance And Defect Liability Period Of One Year Free Of Construction (A/Mtc. Of OfficerS Residences In Sector-6, Panchkula)
Name of Work:- Repair of HSVP Officer Staff Qtr. No.609-A in HSVP Officer Colony in Sector-6, Panchkula including mtc. and defect liability period of one year free of cost. (A/Mtc. of Officer`s Residences in Sector-6, Panchkula)
Sl. No.
Item Description
1
10.63.2:- Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm [Through Rate]
2
13.29.2:- Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate]
3
12.36.1:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws [Through Rate]
4
28.1.1.1:- Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down ize or pea sized gravel spread at 6 cubic decimetre per square metre, including preparation of surface but excluding grading complete with : 1.1. Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322[Through Rate]
5
22.105.1:- Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 1. 15 mm nominal bore [Through Rate]
6
[22.108.1:- Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore [Through Rate]
7
22.181:- Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Through Rate]
8
20.72:- Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. [Through Rate]
9
NS Item:-Supply and Fixing of CPVC Water Connection complete in all respect to the entire satisfaction of EIC. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
