|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:2.9.1 All kinds of soil : |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Supplying and filling in plinth with fine sand under floors including watering, raming consolidation and dressing complete |
| 4 | Providing supplying and stacking of soling including laying ramming complete as per engineer incharge |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: M7.5 |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level (M20) |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: M15 |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure including all carriages |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 12 | Foundations, footings, bases of columns etc. |
| 13 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | Columns, piers, abutments, pillars, posts and struts |
| 15 | Suspended floors, roofs, landings, balconies and access platforms |
| 16 | 15 mm Cement plaster of mix: |
| 17 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and hades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600x600) |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 20 | MARBLE STONE FLOORINGFlooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing completewith: Makrana White Second quality (16mm thick) |
| 21 | Providing and fixing Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 22 | Providing corrugated colour profile high rib G.S Sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen GI limpet washers with GI limpet washers filled with white lead and incl cost of approved steel primer and two coats of paint on overlapping of sheets complete .50 mm thick zinc coated not less than 27.5 gm/sqm |
| 23 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 24 | Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 25 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 1 M.S. tube |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):KD Wood |
| 27 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge.KD wood 30mm thick |
| 28 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm thick |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats |
| 30 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 35mm thick |
| 31 | Finishing with synthetic enamel paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 32 | Sanitary and Plumbing |
| 33 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 34 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 35 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 36 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 37 | Providing and fixing PPR Unions |
| 38 | PPR Union 20mm |
| 39 | PPR Union 25mm |
| 40 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete |
| 41 | 15 mm nominal bore |
| 42 | 20 mm nominal bore |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 44 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.18.10.1 White glazed fire clay kitchen sink of size |
| 45 | C.P. BRASS FITTINGS |
| 46 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 47 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 48 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 49 | Supplying, assembling, and fixing in position unplasticized PVC medium pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and assories etc all complete for all depths as per direction of Engineer-in-charge. |
| 50 | 75mm nominal size dia |
| 51 | 100 mm nominal size dia |
| 52 | Carriage of material from various sources to site of work |
| 53 | Sand 30 kms |
| 54 | Aggregate 10kms |
| 55 | Bricks 10kms |
| 56 | Providing and fixing of indian type water closets complete job |
| 57 | Providing and fixing of 100 mm steel grating |
| 58 | Providing and laying of precast cement concrete rings incl excavation complete job |
| 59 | Providing and fixing ofv 600x450 bevelled edge mirror complete job |
| 60 | Providing and fixing of collapsible shutters |
| 61 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 62 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 200x10 mm |
| 63 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 100x10 mm |
| 64 | Providing and fixing bright finished brass door latch with necessary screws etc. complete. : |
| 65 | Providing and fixing bright finished brass handles with screws etc. complete : |
| 66 | Providing and fixing bright finished brass handles with screws etc. complete : |
| 67 | P/F of 3.5mm thick glass panes incl wooden beading Complete Job Please Enable Macros to View BoQ information |
