|
| 1 | Surface dressing n. exc 15 cm deep in any type of soil, complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc. n.exc 10 sqm on plan and getting out in any type of soil, complete all as specified and directed. |
| 3 | Excavation in trenches n.exc 1.5m wide and exc 1.5m but not exc 3.00m in depth for foundations etc. n.exc 10 sqm on plan and getting out in any type of soil, complete all as specified and directed. |
| 4 | M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregate) in foundation, filling, mass concrete, complete all as specified and directed. |
| 5 | M&L for Reinforced cement concrete (design mix) M-25 using 20mm crushed stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 6 | M&L for RCC M-25 (design mix) using 20mm crushed stone aggregates as in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 7 | M&L for reinforced cement concrete M-25 (design mix) using 20mm crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over1.5m span all as specified. |
| 8 | M&L for Reinforced cement concrete M-25 (design mix) using 20mm crushed stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 9 | M&L for Reinforced cement concrete M-25 (design mix) using 20mm crushed stone aggregates for chhajja all as specified. |
| 10 | Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed. |
| 11 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 12 | M&L for ATT by treating the bottom and sides of excavation at the rate of 5 litres of emulsion per Sqm of surface area, complete all as specified and directed. |
| 13 | M&L for ATT by treating the backfill of excavation in contact with foundation at the rate of 7.5 litres emulsion per sqm of surface area, complete all as specified and directed. |
| 14 | M&L for ATT by treating the top surface of filled earth at the rate of 5 litres emulsion per sqm of surface area, complete all as specified and directed. |
| 15 | M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & directed. |
| 16 | M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed. |
| 17 | M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 18 | M&L for 75 mm thick PCC 1:4:8 as in sub base of floors etc. and finishing the surface even and fair, complete all as specified and directed. |
| 19 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in floors etc. and finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 20 | M&L for 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in plinth protection in panels, including finishing the surfaces even and smooth, complete all as specified & directed. |
| 21 | Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed. |
| 22 | Formwork to sides of square or rectangular pillars, posts, struts, columns etc., complete all as specified and directed. |
| 23 | Formwork to sides and soffits of floor or roof beams,, splays between floor and beams etc., complete all as specified and directed. |
| 24 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 25 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 26 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6, complete all as specified and directed. |
| 27 | M&L TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed. |
| 28 | M&L TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed. |
| 29 | S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed. |
| 30 | M&L for 40mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides one/front face is covered with decorative face veneer all as specified and directed by Engr-in-charge. |
| 31 | S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc. with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc. sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed. |
| 32 | S&F Solid PVC door frame (Single rebated) of size 60mmx30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screw complete all as specified and shown on drawing.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for a long life. |
| 33 | S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 34 | S&F 150mm long SS Stainless steel barrel tower bolts of extruded section ISI marked, complete all as specified and directed. |
| 35 | S&F 150mm extruded SS Stainless steel handle fabricated anodized ISI marked, complete all as specified and directed. |
| 36 | S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed including necessary welding if required . |
| 37 | S&F wood lipping 6mm thick fixed with nail to boarding of any description complete all as specified and directed. |
| 38 | S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed.(a) SP 20048(b) Glazing clips 19352 |
| 39 | S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter both for glazed and wire gauge with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/TD-245/01 and 246/02 sheet ½ & 2/2 (excluding glass & wire guage). |
| 40 | S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed. |
| 41 | S&F Galvanised mild steel wire cloth 0.46mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples/ tinned tacks complete all as specified and directed. |
| 42 | M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 43 | M&L for preparation of New wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed. |
| 45 | S&F prelaminated 18 mm thick lead free factory made 100 % solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30 % wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 Sqm should be 11 Kg(+- 5%) manufactured by ISO 9001-2015 certified company. The sheet should be 100 % water proof, termite proof ,fire retardant, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness, complete including all fittings like handle, piano hinges, normal hinges, magnetic catcher, beading etc. , complete all as specified and directed. |
| 46 | S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanized with wide of flaps 30mm, complete all as specified and directed. |
| 47 | S&F for hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete, |
| 48 | S & F 25mm outer dia stainless steel bright finished, fancy type decorative drapery rod of thickness 20 gauge fixed to wall with screws, PVC gully including all necessary fixing arrangement complete all as specified |
| 49 | S&F stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified . |
| 50 | S&F stainless steel bright finished ,fancy type decorative end caps fixed complete all as specified . |
| 51 | M&L for rendering 15 mm thick in cm 1:4 with using water proofing compound on faces of block masonry /brick work or concrete surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid separately under respective item. |
| 52 | M&L for Rendering 10mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 53 | M&L for Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 54 | M&L for Rendering 10 mm thick plaster RCC Roof slab, facia, ceiling, chajjas fair finished cement mortar 1:3,complete all as specified and directed. |
| 55 | M&L for Rendering 5 mm thick plaster RCC Roof slab, facia, ceiling, chajjas fair finished cement mortar 1:3,complete all as specified and directed. |
| 56 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to required height of bldgs if required complete all as specified and as directed. |
| 57 | M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of New plastered surfaces of wall by using wall care putty of avg 1 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/concrete walls finish to even and smooth with two layers of acreylic wall care putty complete all as specified and as directed |
| 58 | M&L for preparation of concrete surface & applying two coats of oil bound distemper over one coat of primer as on walls surfaces complete all as specified and directed |
| 59 | M&L for preparation of New plastered surfaces of wall including scaffolding up to required height, two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed. |
| 60 | M&L for preparation of newly plastered surfaces of wall, roof projection/ window chajjas and similar surfaces and applying two coatS weather proof exterior emulsion paint, complete all as specified and directed.Note : - Tint/ Shade shall be approved by Engr-in-Charge. |
| 61 | M&L for preparation of concrete surface & applying two coats of oil bound distemper over one coat of primer as on ceiling surfaces complete all as specified and directed |
| 62 | Preparation of new plastered surfaces of walls and M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004 alkali and fungal resistance, dust resistance, water repellant, crack-bridging, weather proof 1st quality exterior paint of approved camouflange pattern with required shades (Company Depot Tinted) with silicon additives @ 1.43 L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm and repairing patches with putty and scaffolding at any height complete all as specified and directed by Engr-in-Charge. Note : - Tint/ shade shall be approved by Engr-in-Charge. |
| 63 | M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster). |
| 64 | M&L for padding as in roof in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate with and incl integral water proofing compound @ 3% weight of cement and providing necessary slope towards outside complete all as specified and directed. |
| 65 | M&L for Rendering 10mm thick plaster in cement mortar 1:3 on fair faces of brick work or concrete surfaces including formwork at any height complete all as specified and directed. |
| 66 | M&L for machine cut Kota stone, stone slab flooring 16-18mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing, complete all as specified and directed. |
| 67 | All as per serial item No. 66 here-in-above but in vertical/dado complete all as spd and directed. |
| 68 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 69 | M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm/ 600mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 70 | S&F for vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc. complete all as specified and directed. |
| 71 | S&F for 10 liters PVC valveless flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed. |
| 72 | S&F for Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement, flush pipe, grating and union for discharge pipe. |
| 73 | S&F vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. |
| 74 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 75 | Rounding to edges of stone slabs, one edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed. |
| 76 | S&F bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 77 | S&F 15mm bore Angle valve fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 78 | S&F stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. |
| 79 | S&F 15mm bore stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe complete all as specified and directed. |
| 80 | S&F pillar tap chromium plated fancy type swan neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 81 | S&F Brass Chromium Plated wall mixture valve cast copper alloy fancy type for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 82 | S&F brass chromium plated overhead shower rose 125mm size with 225mm arm with swivel joints fixed including fixing to steel pipe or union all as specified. |
| 83 | S&F of UPVC underground drawings pipe (UDS) type 'B' 160mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for 160mm bore pipes incl packing under and haunching against the sides of pipes after they are laid tested including necessary excavation in trenches complete all as specified and directed . |
| 84 | S&F beveled edge fancy mirror 5.5mm thick glass of size 600x450mm of selected quality with four holes and catch nut complete design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 85 | S&F brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges, complete all as specified and directed. |
| 86 | S&F hat and coat hooks (Peg set) solid body of aluminium 175mm to 250mm , complete all as specified and directed. |
| 87 | S&F towel ring of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( min wt 90 gms) complete all as specified and directed. |
| 88 | S&F 5.5mm thick glass shelf 12cm wide with cp bracket guard and 60cm long CP railing including chromium plated brass screws and wooden/plastic cleats complete all as specified. |
| 89 | S&F Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing complete all as specified and directed. |
| 90 | S&F 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 91 | S&F grating square 100x 100 mm size of stain less steel, complete all as specified and directed. |
| 92 | M&L for precast cover slab 1:2:4 type B-1 as in Slab supported on wall, beams, column in floor , landings, balconies, canopies, deck slabs and in the shelves, cover slab complete all as specified and directed. |
| 93 | S&F mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 94 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts, complete all as specified and directed. |
| 95 | M&L 20mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron and fixed in repairs complete all as specified and directed. |
| 96 | M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed. |
| 97 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed, complete to walls or floors all as specified. |
| 98 | S&F 20mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete to walls all as specified. |
| 99 | S&F 20mm Tubes, 'medium grade' galvanised, with all fitting laid in trenches, complete to walls all as specified. |
| 100 | M&L for cutting existing GI/CI pipe line of size 40/25/20 mm dia pipe making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, union etc. with existing water line all as specified by Engr-in-charge. |
| 101 | S&F aluminium body door closer hydraulically regulated designation No 3 universal type of dia cast body, suitable for door shutter for taking weight up to 80kg complete all as specified and directed. |
| 102 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 103 | M&L black sheet 1mm thick covering to door shut ters; covering to door chowkats (frames); , etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required all as specified and directed. |
| 104 | S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 105 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 106 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 107 | S&F 110mm bore pipes, PVC (SWR) bends any radius fitting of PVC (SWR) pipes, complete all as specified and directed. |
| 108 | S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socket, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 109 | S&F for 75mm bore pipes, PVC (SWR) bends any radius fitting of PVC (SWR) pipes complete all as specified and directed. |
| 110 | S&F for 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 111 | S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed. |
| 112 | S&F 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required, complete all as specified and directed. |
| 113 | M&L sliding door bolt 250mm thick Stainless steel ISI Marked with hasp & staple bolt type and fixing clips of sheets SS section and fixing bolts and sliding bolts or extruded section all as specified. |
| 114 | S & F for peg set of 5 Pin Stainless steel Grade, AISI 304, fancy type, superior quality with fixing arrangement complete all as specified & directed. |
| 115 | S & F snake guard aluminium/GI strip complete all as specification and directed. |
| 116 | Supply & fixing of CP health faucet with ABS body, 1.00mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed. |
| 117 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 118 | Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 119 | M&L for 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in floors, including finishing the surfaces even and fair, complete all as specified & directed. |
| 120 | M&L Machine pressed precast concrete inter locking paver block any shape with grey cement and pigment size conforming to IS 15658-2006 of 60mm thickness,M-35 Grade laid over sand cushioning. Note :- sand shall be measured and paid separately. |
| 121 | M&L Machine pressed precast concrete inter locking paver block any shape with grey cement and pigment size conforming to IS 15658-2006 of 80mm thickness, M-35 Grade laid over sand cushioning. Note :- sand shall be measured and paid separately. |
| 122 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed. |
| 123 | M&L for sand filling for under floors, complete all as specified and directed. |
| 124 | M&L for PCC 1:3:6 Type C-1, using 20 mm graded crushed stone aggregate as in surface channel and drains complete all as specified. |
| 125 | M&L for RCC 150mm dia NP-2 pipes with collar complete all as specified & directed. |
| 126 | S&F 25mm bore GI tubing medium grade galvanized ISI marked with all fittings, laid in trenches or ground/ in walls, complete all as specified and directed. |
| 127 | M&L for 100mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregates as in bed for pipes incl packing under and haunching against the sides of pipes after they are laid tested complete all as specified & directed. |
| 128 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 129 | M&L for Rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces including formwork at any height complete all as specified and directed, complete all as specified and directed |
| 130 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, benching, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed |
| 131 | M & L for modular point wiring for one light/ fan point or one bell/ buzzer point controlled by one switch 5 Amp, SP, one way 240 volts with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate (Inner + Outer) and modular metallic boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification. |
| 132 | All as per item No. 131.00 here-in-before but for one 5 pin 6 Amp socket outlet point on same board |
| 133 | All as per item No. 131.00 here-in-before but for one 5 pin 6 Amp socket outlet point on independent board controlled by one way switch SP, one way 6 Amp, 240 Volts |
| 134 | All as per ser item 131.00 here-in-before but for 3 pin 15Amp socket outlet independent with PVC unsheathed, multistrand copper conductor of 2.5 Sqmm and continuous PVC insulated and unsheathed 2.5 Sqmm copper conductor cable multistrand as earth wire. |
| 135 | All as per item No 131.00 here-in-before but using 4.00 Sqmm (nominal area) multistranded copper conductor cable for geyser sheet metal plug socket outlet/metal plug top including 4.00 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for geyser on independent point complete all as specified and directed. |
| 136 | M&L for Modular switch single pole, one way, 6 Amps, 1 module, complete all as specified and as directed. |
| 137 | M&L for Modular switch single pole, one way, 16 Amps, 1 module, complete all as specified and as directed. |
| 138 | M&L for Modular socket, 6 Amps, 2/3 pin combined 2 module, complete all as specified and as directed. |
| 139 | M&L for Modular socket, 6/16 Amps, 2/3 pin combined 2 module, complete all as specified and as directed. |
| 140 | S&F Modular white cover plate with frame 3 module complete all as specified and as directed. |
| 141 | S&F Modular white cover plate with frame 6 module complete all as specified and as directed. |
| 142 | S&F metal flush box 3 module complete all as specified and as directed. |
| 143 | S&F metal flush box 6 module complete all as specified and as directed. |
| 144 | S&F T Bulb Curve , 12 Watt LED Base B22 Cool day Light complete all as specified and directed |
| 145 | Supply and fix Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 146 | S & F PVC rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50mm complete all as specified and directed. |
| 147 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. |
| 148 | S&F of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 149 | S&F of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 150 | Supply and fixing MCB Protected Socket With sheet steel Enclosure single pole 20 Amp with 3 pin plug top for AC connection from Socket point to stabilizer complete all as specified and as directed. |
| 151 | Supply and fix of Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , all as specified. |
| 152 | Supply and fixing of LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge. |
| 153 | Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 154 | Supply and fixing of LED lights fitting 1x 20W,minimum 3.5 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete. |
| 155 | Supply and fixing of 5 star rated BLDC ( Brush less direct current motor ) ceiling fan 230 volts, single phase of 1200 mm Sweep with regulator double ball bearing type with minimum air delivery 210 CFM & service value shall not less than 6.0 B.E.E including blade, down rod and canopy cover white colour etc. and including connecting 3 core flexible copper conductor cable complete all as specified and directed by Engr-in-Charge |
| 156 | S&F exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 157 | Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with G I hexagonal adopters/Nuts on the both sides for inlet ( cold water supply) & outlet ( hot water supply) and including provision of wall mounting arrangement and mounding wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed by Engr-in-Charge . |
| 158 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. |
| 159 | M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer including connection with street light complete all as directed. |
| 160 | S&F MCCB TP 100 Amp 415V 16KA fixed type suitable for VTPN DB complete with connection testing and commissioning complete all as specified and directed. |
| 161 | S & F VTPN DBs Double Door 4 way suitable for MCCB incomer, IP 43 protection 415 V AC, 50 Hz AC appropriate size of bus bar and neutral link complete all as specified and directed |
| 162 | Supply and fix exhaust fan, plastic body AC single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers complete all as specified and as directed.. |
| 163 | M&L for Sub main wiring in two single run FRLS PVC insulated cable 6 Sqmm (Nominal dia) copper conductor (multistrand) and drawing in and including new PVC concealed non metallic conduit pipe ISI marked including one run 6 Sqmm multistranded copper conductor FRLS PVC green colour insulated unsheathed cable for earth continuity complete all as spd and directed. |
| 164 | Supply & Fix in repair sheet metal enclouser SPN DB's 4 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. |
| 165 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc. including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified and directed. Note : Earthing filling will be done with vogisumble soil (i.e. tree from stone & gravels). |
| 166 | Supply and laying of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 16 Sqmm 4 Core complete all as specified and directed. |
| 167 | M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed. Note: Punned thickness of sand shall be measured. |
| 168 | Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge |
| 169 | M&L for GI tubing light grade 40 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed . |
| 170 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. Please Enable Macros to View BoQ information |
