|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 3 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 4 | Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:3:6(1cement: 3 sand: 6 graded stone aggregate 20mm nominal size)(Crushed). |
| 5 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 6 | Providing and fixing PVC Weep Holes 75 mm dia in two layers |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 8 | CEMENT PLASTER 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)) |
| 9 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 11 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 13 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) with grass turf |
| 14 | Wall lining butch work upto 10 m height with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips of minimum length 300mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75 x 75mm and by providing layer of 75 thick strips including 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including ruled pointing in cement mortar 1: 2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of the stone and curing complete as per the directions of engineer-in-charge. |
| 15 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm |
| 16 | Providing and fixing wood work in frames of doors windows clestory windows wrought frame and fixed in position of Imported Wood |
| 17 | Providing and fixing 3.5mm thick glass panes incl all fixtures & fittings, all complete as per direction of Engineer-in-charge. |
| 18 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 19 | Providing and fixing wood work in frames of doors windows clestory windows wrought frame and fixed in position of Imported KD Wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge including glass panes Imported KD Wood 35mm thick |
| 21 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 22 | Providing and fixing Pipes 100 mm Dia PVC colour pipes of approved make |
| 23 | Providing and fixing PVC floor trap with jali of approved make |
| 24 | Providing and fixing of GI Pipes B Class Complete with Gi Fitting Including all Necessary Fittings like Socket, Tee, Reducer, etc 15mm dia nominal Bore of approved make |
| 25 | Providing and Fixing of 50 Litr Gyser of Approved quality and make. |
| 26 | Providing and Fixing Stainless Steel Heavy duty Bib Cock of approved make |
| 27 | Carriages of material by Mechnical Transport. |
| 28 | Stone Aggregate and sand from 15 Km lead from nearby source |
| 29 | carriage for bricks for 15 km from nearby source |
| 30 | Kitchen |
| 31 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 32 | Providing and laying of stone soiling dully hand packed including carriage of stone soling with loading unloading and stacking complete. |
| 33 | Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size)(Crushed). |
| 34 | Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:3:6(1cement: 3 sand: 6 graded stone aggregate 20mm nominal size)(Crushed). |
| 35 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 36 | Reinforced cement concrete work upto plinth level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 37 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 38 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 39 | Centering and shuttering including strutting, propping etc and removal of form work for foundation, footings, basis of columns etc for mass concrete including all leads, lifts and carriage of material all complete. |
| 40 | Centering and shuttering including strutting, propping etc and removal of form work for retaining wall, return wall, wall (any thickness) including attached pilasters butresses. Plinth and string course fillets, kerbs and steps including all leads, lifts and carriage of material all complete. |
| 41 | Centering and shuttering including strutting, propping etc and removal of form work for Suspended Floors. Roofs, landings, balaconies and access platform. |
| 42 | Providing and fixing wood work in frames of doors windows clestory windows wrought frame and fixed in position of Imported KD Wood |
| 43 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge including glass panes Imported KD Wood 35mm thick |
| 44 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside rooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Imported KD Wood |
| 45 | providing and fixing wire guaze shutters using galvanised MS wire guaze of average width for aperture 1.4mm in both directions with wire dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of engineer in charge Imported KD Wood |
| 46 | Applying priming coat with ready mixprimer of approved brand on wood work complete |
| 47 | Painting with synthetic emamel paint of approved brand and manufacture to give an even shades of two or more coats on wood work complete. |
| 48 | P/F hardware items of approved brand & quality incl c/o screws, fixtures all complete |
| 49 | a)Handles 6\\" |
| 50 | b)Handles 4\\" |
| 51 | c)T.Bolt 6\\" |
| 52 | d)T.Bolt 4\\" |
| 53 | e)L Drop |
| 54 | 12mm thick plaster in Cement Mortar 1;4 mix. (1 Cement : 4 fine sand) |
| 55 | 6mm cement plaster to ceiling of mic 1;3 (1 cement : 3 fine sand) |
| 56 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth surface complete. |
| 57 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including priming coat with water thinnable cement primer |
| 58 | Finishing walls with acrylic smooth exterior paint of required shade on new work (two or more coats applied @ 1.667 litre/ sqm over and including priming coat of exterior primer [email protected]/10sqm) |
| 59 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 60 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 61 | Providing ridges or hips of width 60cm overall width color G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete .0.63 mm thick with zinc coating not less than 275 gram/m2 (12.4) 0.5mm |
| 62 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4) |
| 63 | Providing and fixing of various PVC sanitary fittings of approved make |
| 64 | Providing and fixing of PVC pipes 100 mm dia of standard make incl. all fittings and fixtures complete job |
| 65 | 75mm dia pipes |
| 66 | 100mm dia pipes |
| 67 | Providing and fixing Plain Bend of required degree |
| 68 | 75mm dia pipes |
| 69 | 100mm dia pipes |
| 70 | Door Tee 4\\" |
| 71 | Door Tee 3\\" |
| 72 | Reducer T (4\\"/3\\") |
| 73 | Union (3\\"/4\\") |
| 74 | Coupler Socket 4\\" with rubber |
| 75 | Coupler Socket 3\\" with rubber |
| 76 | Cowl and Clif |
| 77 | Providing and fixing of various CP sanitary fittings of approved Make |
| 78 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (Quality jaquar/Hindware) |
| 79 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 80 | Single pin Stainless steel hanger |
| 81 | Providing and fixing brass Mixer of approved quality.15 mm nominal bore |
| 82 | Providing and fixing of various sanitary fittings ( GI/CP/PVC) of approved make |
| 83 | Floor Trap |
| 84 | Plain Bend |
| 85 | Door Junction |
| 86 | Collar |
| 87 | Angle Value |
| 88 | Providing and fixing PTMT grating of approved quality and colour 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 89 | providing and fixing kitchen sink with CI brackets and stainless steel plug , including painting of fittings and brackets, cutting and making good the walls whereever required |
| 90 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 91 | Providing and Fixing of 50 Litr Gyser of Approved quality and make. |
| 92 | Providing and Fixing of Exhaust Fan of Approved quality and make. (9\\" size) |
| 93 | Filling available excavated . Earth(excld. Rock) in trenches plinth sides of foundation etc. layers not excd. 20cm in depth consolidating each deposited layer by raming and watering lead 50m and lift |
| 94 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 95 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm |
| 96 | Carriages of material by Mechnical Transport. |
| 97 | Stone Aggregate and sand from 15 Km lead from nearby source |
| 98 | carriage for bricks for 15 km from nearby source |
| 99 | Providing and installation of information board and sign board including all letter writing etc complete as per direction of EIC Please Enable Macros to View BoQ information |
