|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) |
| 3 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 4 | 250x16 mm (DSR 9.96.2) |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 6 | 200x10 mm (DSR 9.97.3) |
| 7 | 150x10 mm (DSR 9.97.4) |
| 8 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 9 | 125mm (DSR 9.100.1) |
| 10 | Providing and fixing aluminium hanging floor door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 11 | Twin rubber stopper (DSR 9.101.2) |
| 12 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 13 | In 75x75 mm deep chase (DSR 12.21.1) |
| 14 | 12 mm cement plaster |
| 15 | 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) |
| 16 | Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): |
| 17 | Flush/ Ruled/ Struck or weathered pointing (DSR 13.32.1) |
| 18 | Renewing glass panes, with wooden fillets wherever necessary: |
| 19 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.6.1) |
| 20 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (DSR 14.13) |
| 21 | Dismantling of Door and windows and clerestory windows ( steel & wood ) shuttter including chowkhats, architrave, hold fasts etc complete & staking within 50m lead. |
| 22 | Of Area 3 sqm and below (DSR 15.12.1) |
| 23 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 15.56) |
| 24 | Disposal of building rubbish /malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR 15.60) |
| 25 | Providing and fixing of PVC pipe (4\\" dia) 110mm @ 4kg / sqm of approved make including all the accessories i.e. Bend, Tee, reducer etc. and jointing with cement solvent to the entire satisfaction of Engineer-in-charge. (NS) |
| 26 | Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of aluminium hinges 4'', SS handles 5'', Aluminium Tower bolts 8'' & 6''all necessary Alumn fitting and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. (NS) |
| 27 | Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2\\"x3/4\\" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 2 nos. 3\\" butt hinges, 2nos Aluminium tower bolts 4\\", Aluminium handles 1 no. I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) and removal of old shutter complete in all respect to the entire satisfaction of Engineer-in-charge. (NS) |
| 28 | Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2\\" x 2 1/4\\"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, refixing of existing grills/ doors, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge. (NS) Please Enable Macros to View BoQ information |
