|
| 1 | EARTHWORK: |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil. |
| 3 | Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering lead upto 50 m and lift upto 1.5 m |
| 4 | Supplying and filling in plinth with sandy soil under floors including watering, ramming, consolidating and dressing complete. |
| 5 | CEMENT CONCRETE WORKS: |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering, - All work upto plinth level: |
| 7 | (a) 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) |
| 8 | (b) 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) |
| 9 | RE-INFORCED CEMENT CONCRETE WORKS: |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: |
| 11 | (a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with |
| 13 | (a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 14 | Reinforced cement concrete work in walls (any thickness) i/c attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level but excluding the cost of centering and shuttering and reinforcement: |
| 15 | (a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 16 | STEEL REINFORCEMENT: |
| 17 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete. |
| 18 | (a) Thermo-Mechanically Treated bars |
| 19 | FORM WORKS: |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 21 | a). Foundation, footing, bases of column etc and mass concrete. |
| 22 | b). Column, pillar, posts and struts (square rectangle or polygon in plain). |
| 23 | c). Lintels, beams , plinth beams,girders,bresummer and cantilever with water proof ply 12 mm thick |
| 24 | d). suspended floor,roofs landing balconies ans access platform with water proof ply 12 mm thick |
| 25 | e).Stairs (excluding Landings) except spiral-staircase. |
| 26 | f). Weather shade, Chhajjas corbels etc. including edges |
| 27 | BRICKWORKS: |
| 28 | Brick work with 1st class burnt clay F.P.S(non modular) bricks in foundation & plinth in cement mortar 1 : 4 (1cement :4 coarse sand). |
| 29 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in cement mortar 1 : 3 (1cement :3coarse sand). |
| 30 | WOOD WORKS: |
| 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia. And length (hold fast or dash fastener shall be paid for seperately(a) Local best quality Teak wood |
| 32 | Providing and fixing panelled or paneled and glazed shutters for doors, windows and clerestory Windows i/c ISI marked M.S.butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately, all complete as per direction of Engineer-in-charge.(a) Local best quality Teak wood - 35 mm thick shutters |
| 33 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling or panelled and glazed shutters 25mm to 40 mm thick : |
| 34 | Float glass panes 4 mm thick glass panes |
| 35 | Providing and fixing M.S Grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 36 | Fixed to openings/wooden frames with rawl plugs screws etc. |
| 37 | Providing 40X3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia. Bolts, nuts and wooden plugs and embedding in cement concrete block 30X10X15 cm 1:3:6 mix (1 cement : 3coarse sand: 6 stone aggregate 20mm nominal size). |
| 38 | Providing and fixing bright finished brass100 mm door mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 39 | Providing and fixing ISI marked oxidised M.S. Tower bolts black finished(barrel type ) with screws etc. complete. |
| 40 | (a) 250x10mm |
| 41 | (b) 100x10 |
| 42 | Providing & fixing ISI marked oxidised M.S. Sliding bolts with screws etc. Complete.(a) 250X16mm. |
| 43 | Providing and fixing ISI marked oxidised M.S handles conforming to IS:4992 with necessary screws etc. complete: 125 mm |
| 44 | (a) 125mm |
| 45 | (b) 100mm |
| 46 | FLOORING: |
| 47 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 48 | Size of Tile 600 x 600 mm |
| 49 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including grouting the joints with white cement & matching pigments etc. complete |
| 50 | Size of Tile 600 x 600 mm |
| 51 | STEEL WORKS: |
| 52 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffering, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of the stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 53 | Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 54 | FINISHING: |
| 55 | 15mm cement plaster on rough side of single or half brick wall of mix: 1: 4 (1 cement : 4 coarse sand) |
| 56 | Cement plaster 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement . |
| 57 | 12mm cement plaster |
| 58 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over plastered surface to prepare the surface even and smooth complete. |
| 59 | Distempering with oil bound washable distemper of approved brand and manufacturer to give an even shade. New work (two or more coats) over and including priming coat with cement primer :- |
| 60 | Finishing walls with textured exterior paint of required shade |
| 61 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm |
| 62 | Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood ) |
| 63 | Varnishing with varnish of approved brand and manufacture to give an even shade |
| 64 | Two or more coats of glue sizing with copal varnish over an under of flatting varnish. |
| 65 | Making plinth protection 50 mm cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm niminal size well rammed ans consolidated and grouted with fine sand including finishing the top smooth. |
| 66 | SANITARY INSTALLATION |
| 67 | Septic Tank |
| 68 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. |
| 69 | All kinds of soil |
| 70 | Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 71 | P.C.C WORK : |
| 72 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 73 | a) 1:3:6( 1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size) |
| 74 | b) 1:4:8( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) |
| 75 | FORM WORK: |
| 76 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 77 | a) Foundations, footings bases of columns etc. for mass concrete. |
| 78 | b) Suspended floors, roofs, landings, balconies and access platform |
| 79 | RCC WORK: |
| 80 | R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 81 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth Level. |
| 82 | a)Thermo-Mechanically Treated bars |
| 83 | Brickworks: |
| 84 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 85 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 86 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks inFoundation and plinth l in |
| 87 | Cement mortar 1:3 (1cement:3coarse sand) |
| 88 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 89 | Flooring: |
| 90 | Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete. |
| 91 | a) 40mm thick with 20mm nominal size stone aggregate.. |
| 92 | 15 mm cemnet plaster on rough side of single or half brick wall finished with a floating coat of neat cement mix: a)Cement plaster 1:3(1 cement: 3f/sand) |
| 93 | Supplying and fixing C.I. Cover with frame (for manhole and chambers) |
| 94 | 600x450 mm rectangular C.I. Cover (light duty) 23 kg |
| 95 | SANITARY INSTALLATION |
| 96 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 97 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests |
| 98 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever). conforming to IS : 7231. with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required : |
| 99 | W.C. pan with ISI marked white solid plastic seat and lid |
| 100 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x 350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass onions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 101 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 102 | Providing and fixing white vitreous chinas quatting plate uri nal with integral rim longitudinal flush pipe |
| 103 | Providing and fixing wash basin with C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required :- |
| 104 | a) White Vitreous China Wash basin size 550x400 mm with a Single of 15 mm C.P. brass pillar taps |
| 105 | P/F 8mm dia C.P./SS Jet with flexible tube upto 1 metre long with triangular plate to European type W.C. of quality and make as approved by E ngineer-in-charge |
| 106 | Providing and fixing 600x450 mm bevolod cdgo mirror of superior glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 107 | Providing and fixing wash basin with C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required :- |
| 108 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour |
| 109 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective weight of 88 mm, weighing not less than 190 gms |
| 110 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 111 | PProviding and fixing Unplaticcised Rigid PVC rain water pipes conforming to IS: 13592 type-A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion (i) Single socked pipes. |
| 112 | a)75 mm dia |
| 113 | b)110 mm dia |
| 114 | Water Supply |
| 115 | Providing and fixing brass bib cock of approved quality sonforming to ISI : 8931 |
| 116 | 15 mm nominal bore |
| 117 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 118 | Providing and fixing C.P. brass stop cock of approved quality.conforming to ISI : 8931 |
| 119 | a) 15 mm nominal bore |
| 120 | Providing and fixing C.P. brass angle valve for mixer and geyser points of approved quality conforming to 1S.8931. |
| 121 | 15 mm nominal bore |
| 122 | Providing and fixing mixer tap |
| 123 | 15 mm nominal bore |
| 124 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 125 | a) 15 mm nominal bore |
| 126 | a) 25 mm nominal bore |
| 127 | Providing and fixing uplasticised PVC connection pipe with brass unions |
| 128 | a) 30cm length |
| 129 | 20 mm nominal bore |
| 130 | Providing and Chlorinated polyvinyl chloride ( CPVC) pipes aving thermal stability for hot and cold watter supply including all CPVC plain and brass treaded fittings, i/c fixing pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good te same including testing of joints compare as per directiopn of engineer in charge. |
| 131 | Concealed work, including cutting chases and making good the walls etc. |
| 132 | a) 15 mm nominal outer dia pipes |
| 133 | b) 25 mm nominal outer dia pipes |
| 134 | Providing and Chlorinated polyvinyl chloride ( CPVC) pipes aving thermal stability for hot and cold watter supply including all CPVC plain and brass treaded fittings. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good te same including testing of joints compare as per directiopn of engineer in charge. |
| 135 | External works |
| 136 | a) 25 mm nominal outer dia pipes |
| 137 | b) 32 mm nominal outer dia pipes |
| 138 | Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank. |
| 139 | Providing and Fixing 2HP Single Phase self priming mono block water pump- ACS1530. |
| 140 | a) 2 HP water pump |
| 141 | WATER RESERVOIR |
| 142 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil. |
| 143 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - a) 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 144 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level : a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 145 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 146 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 147 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 148 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 149 | d). suspended floor,roofs landing balconies ans access platform with water proof ply 12 mm thick |
| 150 | c). Lintels, beams , plinth beams, girders, bresummer and cantilever with water proof ply 12 mm thick |
| 151 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.Thermo-Mechanically Treated bars |
| 152 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall. |
| 153 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.a),40mm thick with 20mm nominal size stone aggregate. |
| 154 | IEI ITEMS |
| 155 | COPPER WIRING IN PVC CONDUIT. |
| 156 | Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm. FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit with modular type switch modular plate, suitable G.I. box and earthing the point with 1.5 mm 2 FR PVC insluted copper conductor single core cable etc., as reqd. |
| 157 | Group C |
| 158 | Wiring for light pt/power plug with 2x4mm2 FR pvc ins. Cu.cond.s/c cable in surface /recessed PVC conduit alongwith 1 no. 4mm2 FR pvc.ins.Cu.cond. s/c cable for loop earthing etc.as reqd. |
| 159 | Wiring for circuit/ Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed P.V.C. conduit etc. as reqd. |
| 160 | a ) 2x2.5mm2+1x2.5mm2 earth wire |
| 161 | b) 2x4mm2+1x4mm2 earth wire |
| 162 | c) 2x6 mm2+1x6mm2 earth wire |
| 163 | S/F (following Modular type switch/socket) on the existing switch box i/c connection etc.as reqd. |
| 164 | 5/6 amps. Switch |
| 165 | 15/16 amp.s switch |
| 166 | 3 pin 5/6 amps.socket outlet |
| 167 | 6 pin 15/16 amps.socket outlet |
| 168 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd. |
| 169 | S/F (following size/modular switch plate base and cover plate for modular switch in recess SSS as reqd. |
| 170 | 1 or 2 module (75mmx75mm) |
| 171 | 4 module |
| 172 | 8 module |
| 173 | 12 module |
| 174 | S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator) |
| 175 | 12 Way Double door |
| 176 | S/F 5 amp. to 32 amp.rating 230V 'B' series MCB for lighting and other load of (following pole) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. |
| 177 | Single pole and neutral |
| 178 | S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. (a) 63 amp. |
| 179 | 63 amp |
| 180 | Earthing with Cu.earth plate 600mmx600mm x6mm thick i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd. |
| 181 | Extra for using salt and charcoal for G.I. or Cu.plate earth electrode as reqd. |
| 182 | P/S 25mmx5mm copper strip in 40 dia pipe from earth electrode as reqd. |
| 183 | P/S 25mmx5mm copper strip on surface or in recessed for connection etc. as required. |
| 184 | S/F bus bar chamber with 4 strips Cu. Bus bar length 900mm suitable suitable for 200 amp.capacity complete with all accessories i/c connection earthing the body etc.as reqd. |
| 185 | S/F Recess Mounting LED down Lighter BGSL 0101WH,220223,cast aluminium housing fixed with collimated lens,1x1W white LED mounted on MCPCB ,extruded Al heat sink spring loaded mounting clips, complete with connections etc as reqd. |
| 186 | S/F 48\\" (1200mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regulator etc as reqd. (Make Bajaj/ Usha or similar |
| 187 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd Please Enable Macros to View BoQ information |
