|
| 1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.35 mm thick shutters Kiln seasoned and chemically treated hollock wood. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters Kiln seasoned and chemically treated hollock wood. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 5 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 6 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 7 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 8 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead In Cement mortar : including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) as per the direction of the Engineer-in Charge including carriage of materials through all modes of transportation within all leads and lifts of materials and other incidentals. |
| 10 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 11 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. With cement mortar 1:4 (1 cement : 4 fine sand) including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 14 | Providing and laying Plain Cement Concrete nominal mix 1:6:12 (one cement isto six sand isto twelve graded stone aggregate 40mm (fourty milimeters) nominal size) Mechanically mixed, vibrated and curing complete including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Size of Tile 450x300 mm including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 17 | Providing and laying 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 18 | Providing and laying concrete for P.C.C. grade M-10 (ten) nominal mix 1:3:6 (one cement isto three sand isto six graded stone aggregate 20 mm (twenty milimeters) nominal size) mechanically mixed and vibrated in open foundations complete as per drawings and technical specifications clause 802, 803,1202 and 1203 (eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) curing complete as per MORD specifications including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 20 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in- harge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 21 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 22 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 23 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 24 | Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete :125 mm including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 25 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 26 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. 125mm complete : including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 27 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 28 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 29 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 30 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 31 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 32 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 250 mm.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 35 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 36 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 37 | Providing and fixing 100 mm sand cast Iron grating for gully trap.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 38 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 39 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 40 | Providing and fixing brass stop cock of approved quality 15 mm nominal bore including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 42 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 43 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 44 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 45 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 46 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90° For 15.88mm outer dia pipe including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 47 | Providing and fixing required Stainless Steel Fitting of press fit design of grade A ISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee For 15.88 mm outer dia pipe including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. |
| 49 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and other incidental charges and as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
