|
| 1 | [23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate] |
| 2 | [23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate] |
| 3 | SITC of PC Client Intel i7 processor with clock speed- minimum 3.0GHz, RAM8 GB and Expandable. Window 11 or Window 2016 Server or Unix based Edition .Minimum 1TB . LAN Interface 10/100/1000 Mbps Ethernet.).. Mouse Optical . USB port at front. Make: HP/ Dell/Lenovo. |
| 4 | SITC of 15 Mtr HDMI cable Connectors at both ends Make : Key Digital/Manhattan/Kramer |
| 5 | SITC of 10 Mtr USB cable Connectors at both ends |
| 6 | SITC of 20 Mtr USB cable Connectors at both ends |
| 7 | SITC of 3 Mtr USB cable Connectors at both ends |
| 8 | SITC of 12U Equipment Rack .Make: Comrack/HCL/Valrack. |
| 9 | SITC of Flush- Mounted Digital Chairman Conference Units, through connectivty of CAT6 with ploar pattern of cardioid, sensitivity of –46 dBV/Pa and a frequency response covering 20Hz to 20kHz. The input impedance shall be 2 k?, and the directional characteristic at 0°/180° shall be greater than 20 dB at 1 kHz, equivalent noise level not more than 20 dBA SPL, while the maximum sound pressure level shall reach 125 dB with signal-to-noise ratio shall be greater than 80 dB, crosstalk shall be greater than 80 dB, and total harmonic distortion shall not exceed 0.05%, The unit shall support an earphone load greater than 10 ?, with earphone output volume of 10 mW, and shall provide one 3.5mm earphone jack with volume control, redundant cabling, lighting indication in detachable microphone and button both, circuit should be Anti Interference, and should have button and provision of Chairman unit can approve delegate speech requests, manage unlimited speakers, and maintain priority control over conference order and mute/unmute, etc complete requrired as per specifications Make Beyerdynamic/Bosch/Clarilus /Sennheiser/Brahler |
| 10 | SITC of Extension Cable Assembly - 15 Mtrs MakeBeyerdynamic/Bosch/Clarilus /Sennheiser/Brahler |
| 11 | SITC of Ceiling Loudspeaker Rated power 24 or Better Watt. Maximum power 30 Watt. Sound pressure level 1 kHz oct, 1 W, @1 m 90 dB (±3 dB) .Effective frequency range 70 Hz to 20 kHz. Co-axial full-range speaker with poly cone tweeter. Simple power tappings at full, half and quarter power. Power taps at 100 V 24 W – 15 W – 7.5 W or Better . 100 hours PHC (Powering Handling Capaclty) test in acc. to IEC 60268-1and5. SAFE (Simulated Acoustic Feedback Exposure) test to withstand 50 sweep runs of square wave from low frequency to high frequency at twice the rated power, simulating feedback situation. Make JBL/Bosch/QSC/Brahler |
| 12 | SITC of 1.5 mtr HDMI cable in existing pipe/ channel connectors at both ends complete in all respect. Make : Key Digital/Manhattan/Kramer |
| 13 | S.I.T.C of 2 Core, 1.5sq mm Speaker Cable For Loudspeakers Make: Havells/Polycab/Finolex |
| 14 | SITC of MK Channel NCT 1050 ( 100mm x 50mm ) Complete the job in all respect upto entire satisfaction of the Engineer -in-charge of work |
| 15 | SITC of Composite Audio Cable multi Stranded 2 Core double insulated. complete on all respect. Make:- CHETAN/ ASIAN/ DEEPCAB |
| 16 | SITC of 3Core Power cable 1.5 sqmm.Make: Finolex/Polycab/Havells |
| 17 | SITC of Wireless Access Point 10/100Mbps. Make: Netgear/Cisco/Zyxel |
| 18 | SITC of 24 Port network switch 10/100Mbps. Make: Netgear/Cisco/Zyxel |
| 19 | SITC of Led Screen Size 43 inch, Brightness (cd/m²) Typical-440 nits or higher, Response Time (ms)-8 ms or lower, Display resolution (H x V pixels)-4K UHD (3840 * 2160),Backlight type-Direct LED, Operation time-24*7, Viewing Angle (Right/Left/Up/Down)-178 degree, Operating System (Built in)-Android , HDR Compatibility-HDR10, HLG, Dolby Vision, On-board Storage (GB)-16 GB or more, Color gamut (DCI-P3)-92% or higher, Wi-Fi Direct, Wi-Fi Certified and Wireless LAN, Chromecast and Apple AirPlay built in, HDCP-2.3, Ports and Connectivity-HDMI (4), Digital Audio Out (1), USB (2), Ethernet (1), Power consumption-Not more than 105 W, Make Sony/Christie/Barco |
| 20 | S.I.T.C of OPS - Interactive display must have 80 Pin OPS slot, Processor - It should have Intel i5 processor or higher with Licensed Windows 11 IOT GAC OS. 10th generation or higher, RAM - It should have RAM of 8GB, ROM / Storage memory - It should have memory storage of 256GB SSD or higher, Interface - It should have USB2.0 x 2 ports, USB3.0x 4 ports, DP outx1 port, HDMI out x1 port. Network - It should have RJ45 LAN port x 1, WiFi - It should have inbuilt WiFi with two antennas. Bluetooth - It should have Bluetooth version 4.0 or above, Audio ports - It should have 3.5mm with Mic/Line-inx1 port,Line-out 3.5mmx 1 port. Approved Makes PeopleLink/HP/Samsung |
| 21 | SITC of Switch should have total 8 Nos. Gigabit port of 10/100/1000 Mbps PoE Ethernet Ports and 2 Nos.Gigabit SFP slot(SFP/GbE)., shou, ld have Min. 20 Gbps Back plane or more and should have Min.14.8 Mpps or more, 8K MAC Address, Dual Software (firmware) image,1K Static VLAN, LACP aggregation, Jumbo Frames 9K,IGMP v1,v2,v3. SNMP v1,v2, v3. NTP, Syslog, CE, FCC, C-Tick, Class B, ISO 9001, ISO 14001, ISO45001, ISO 27001, PoE power budget more than 75 Watt, Operating Temperature 0 to 50 C.MTBF of 801,100.hrs.Swith should be supplied with management software to manage and maintain multiple layer2 switches for Centralized and batch configurations like IP configurations, IP renew, Web Gui access, Firmware update, device locating etc. Make- Cisco, Alcatel, Zyxel, Juniper |
| 22 | SITC of Switch should have total 28 Nos. Gigabit port including 24 Nos. of 10/100/1000 Mbps Ethernet Ports and 4 Nos. of dual personality (SFP/GbE) ports, PoE features are not applicable if requirement is for non-PoE switch.Should have flexibility to manage switch in standalone mode and Cloud management mode which allows ease deployment with real-time configurations, should be bundled with 1-Year Professional Pack bundled The Switch should have Non-blocking wire speed switch fabric, should have Min. 56 Gbps Back plane or more and should have Min. 42 Mpps., The Switch should support Min. 16K Mac address or more, IPv6 addressing architecture (RFC 4291), Dual stack (RFC 4213), ICMPv6 (RFC 4443), Path MTU (RFC 1981),Minimum path MTU size of 1280 (RFC 5095), Encapsulation for maximum MTU of 1500,• Neighbor discovery (RFC 4861) • DHCPv6 relay, Default DHCP client mode,DAD (Duplicated Address detection),CE-LVD ,FCC, CE ,BSMI , RoHS Compliant, Operating temperature 0 DegC to 50 Deg C, Should have Cluster Stacking to manage up to 24 switches by single IP addressThe OEM Brand should be having valid ISO 9000, ISO 14000 and ISO 50001 cerficates, all these cerificates must be submitted in technical bid. Make- Cisco, Alcatel, Zyxel, Juniper |
| 23 | SITC of Push Button Telephone Desktop model CLI, flash , redial ,mic with speaker complete in all respect.Make :-Beetel /Hola/Panasonic |
| 24 | Supply and erection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis 20 Pair |
| 25 | SITC of UTP cat 6 information outlet( RED - for Data - User End) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM/Molex/SIMON |
| 26 | S.I.T.C of UTP Face plate(Single/dual) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:-RandM/Molex/D Link |
| 27 | S.I.T.C of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link3 FT lenth |
| 28 | S.I.T.C of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link7 FT lenth |
| 29 | SITC of 24-port 19` 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19` 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make ( RandM,/Molex/D-link) |
| 30 | S.I.T.C of 9 U rack including power distribution kit, cable Manager complete in all respect Make Valrack /Comrack/ PRESIDENT |
| 31 | SITC of TWO Zone Conventional Fire Alarm Panel system sensor with following feature: Operates on 230 V AC, 50 Hz AC supply. Battery backup with built in charger. Battery backup with built in charger = Fire / fault status in unambiguous colour LED indications. 16x 2 line dot matrix LCD display. Zone wise fire, open, short LED indications. External s/w to test each zone fire, open, short status manually. External s/w for reset, Silence, Lamp test. Zone isolation facility with loop voltage cut off. Mains on, System On, Charger on, visual indications. Battery Lowand Common fire indications. Attachable with all types of fire detectors. Make Bosch/ Morley/Siemens |
| 32 | SITC of Photoelectric Smoke Detector, low current draw, wide operating voltage, LED detector status indicator, Programmable sensitivity, automatic drift compensation Tested and approved to EN54-7:2000 complete in all respect as Make Bosch/ Morley/Siemens |
| 33 | SITC of electrical hooter operational with DC 24 Volts, sounder output 80 db @ 1 meter and 2 core wiring complete in all respect as desired by the engineer in charge at site Make Bosch/ Morley/Siemens |
| 34 | SITC of Glass break manual call point complete in all respect as desired by the engineer in charge at site. Make Bosch/ Morley/Siemens |
| 35 | Supply Installation, Testing and Commissioning of Glow Type Exit Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class - I material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer-in-Charge of work. Make Pearl/Giolite/OMEX. |
| 36 | S.I.T.C of PVC unsheathed s/c stranded ( ISI marked ) copper contuvtor cable 1100v grade in existing pipe excluding cost and erection of pipe but including connection etc. with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer – in charge of work MAKE FINOLEX/POLYCAB/Plaza.PVC unsheathed copper size 1.5 sq mm single core |
| 37 | Online UPS - Input supply: Single Phase, Output Supply : Single Phase Supplying, installation, Testing and Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)`s both for the rectifier and inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be )95% at 100% non-linear loads. Current total harmonic distortion (ITHD)/ total demand distortion (TDD) on the input grid shall be ( 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz plus /- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute Operating temperature 0 to 40 deg C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short circuit, battery deep discharge, 10 KV surge. Display for watt/VA, Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 and 3). The UPS should be with IGBT Based Inverter Technology, Communication RS232/RS485/SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required accoseries are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc. 3KVA (HSR 23.33.1.2) |
| 38 | Providing, fixing, testing and commissioning of ISI marked (ISI MARK 15683) portable CO2 fire extinguisher of capacity 4.5 kg including valve,horn,suitable handle, discharge hose of one meter long complete in all respect with explosive certificate (HSR 36.30) |
| 39 | Providing, fixing, testing and commissioning of ISI marked (ISI MARK 15683) portable ABC multipurpose filled by 90% (MAP) mono amonioum phosphate powders, nitrogen pressurised type fire extinguisher with meter, hose reel rubber pipe with 0.50 mtr long with capacity of 6 kg complete in all respect. (HSR 36.35) |
| 40 | S/I/T/C of Flush- Mounted Digital Delegate Conference Units, through connectivty of CAT6 with ploar pattern of cardioid, sensitivity of –46 dBV/Pa and a frequency response covering 20Hz to 20kHz. The input impedance shall be 2 kO, and the directional characteristic at 0°/180° shall be greater than 20 dB at 1 kHz, equivalent noise level not more than 20 dBA SPL, while the maximum sound pressure level shall reach 125 dB with signal-to-noise ratio shall be greater than 80 dB, crosstalk shall be greater than 80 dB, and total harmonic distortion shall not exceed 0.05%, The unit shall support an earphone load greater than 10 O, with earphone output volume of 10 mW, and shall provide one 3.5mm earphone jack with volume control, redundant cabling, lighting indication in detachable microphone and button both, circuit should be Anti Interference, and should have button and provision of delagte unit with ON/OFF feature, etc complete requrired as per specifications Make Beyerdynamic/Bosch/Clarilus /Sennheiser/Brahler |
| 41 | S/I/T/C of Central Control Unit, Shall operate on AC 100–240V, 50/60Hz power supply and provide a frequency response from 20 Hz to 20 kHz, signal-to-noise ratio shall be greater than 96 dBA and total harmonic distortion shall remain below 0.05%, equipped with one USB recording connector, four or more DIN-8 input connectors, and four or more RJ45 group connectors. It shall include RS-232 (3P) connectors for both central controller and camera switch, and optionally support HDMI 4×1 video input. Camera control shall be provided through a 6P connector, while computer connectivity shall be available via USB and RJ45. The builtding alarm integration interface shall consist of two 2P connectors (5V plus Audio), Audio input shall be supported through one 2P unbalanced connector and one RCA unbalanced connector and output shall include one 3P balanced connector, two 2P unbalanced connectors, one XLR balanced connector, one 6.35 mm unbalanced connector, one RCA unbalanced connector, one coaxial connector, and one optical fiber connector. The unit shall also incorporate a sound card with USB and RCA (unbalanced ×2) interfaces, shall be built on advanced digital processing with inbuilt digital signal processor for better audio output and transmission technology, fully compliant with IEC60065 international standards with powered by a 1.4 GHz industrial-grade embedded processor with 1 GB memory to ensure high-speed performance and smooth system response system scalability, Touch screen: 4.3-inch or bigger full-view IPS capacitive touch screen, accommodating up to 240 units per host interface and a total system capacity of 76,800 units, with flexible connection methods. Leadership control shall be unlimited, with configurable speaker limits from 1 to 20 and no restrictions for chairman or VIP units with eight intelligent conference modes including FIFO, LIFO, quantity limit, chairman permission, voice activation, timed speech, queuing, and free discussion, ensuring adaptability to diverse meeting styles. Camera integration shall support PELCO-D/P, SONY, SAMSUNG, and other protocols, with tracking, preset positions, RS-232/RS-485 control, and HDMI/SDI matrix switching for cameras, etc complete requried as per specifications. Make Beyerdynamic/Bosch/Clarilus /Sennheiser/Brahler |
| 42 | S/I/T/C of 240 W Amplifier , Inbuilt Bluetooth for audio streaming, Supports audio playback from USB pen drive, Battery voltage -24Vdc (max.10%deviation), Frequency response-50Hz to 18 kHz( plus 1/-3 db), Distortion (at rated out power ar 1 khz)- (3%, Inputs-4 balanced inputs/3 stereo line inputs, Input 1-(5 pole DIN/6.3 mm phone jack), Input 2-4-(6.3 mm phone jack), Impendence-1k balanced, Sensitivity-1.0mV (mic inputs), S/N-)75 DB, Chime-0/2(OFF/ON) selectable-onDIN input complete in all respect Make JBL/Bosch/QSC/Brahler |
| 43 | S/I/T/C of Plena Booster Amplifier 120 Watts , Input Voltage -230VAC ±10% at 50/60Hz or 24VDC ±10%, Inrush Current - 8A at 230 VAC, 6A at 24 VDC , Rated Output (RMS) 120W, Power reduction on backup power -1 dB, Frequency response - 60 Hz to 18 kHz ( plus 1 / -3 dB at -10 dB ref. rated output),Distortion -(1% at rated power,1kHz - S/N (flat at max volume)) 65 dB Make JBL/Bosch/QSC/Brahler |
| 44 | S/I/T/C of Wireless Handheld System which Contains Dual Channel receiver and two no. wireless handheld transmitter with UHF frequency band, Power consumption:(7.2W, switching Band width: 30MHz, Modulation method: FM, Oscillation mode: PLL, Sensitivity:)60dB @ 25KHz, 6dBv, Maximum offset: ± 45KHzS/N: >105dB, T. H. D: < 0.7% @ 1KHz, Frequency response: 20Hz~20KHz ± 3dB, coverage area: 60mtr, Audio output interface: unbalanced 6.35mm × 1, Balanced XLR × 2 or more, transmitetr should have LCD/LED screen to show status, handheld receiver should have with intrerchangable microphone with cardioid polar pattern, Working hours:10 hours or more, Frequency range: UHF, Working temperature: -9 -40?, Oscillation mode: PLL, Harmonic radiation: (-65dBm, Maximum offset: plus -45KHz, Rf power output: 15MW or more, units should have USB type-c connectivity for charging, every receiver has volume adjustment button, etc complete required as per specifications. Approved Makes: Clarilus/Earthworks/Clock Audio /Sennheiser |
| 45 | S/I/T/C of 4x4 HDMI 2.0 Matrix Switcher. Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant. Audio Matrix, audio out can de- embedded from arbitrary input or output. Individual volume adjustment on each L plus R output. Supports 4K to 1080p down-scaling up to 2 outputs. HDMI out provides 2.5W to power Active Optical Cable (AoC). HDMI Output support up to 5V500mA for AoC cable Controllable by front panel, IR, RS232 and TCP/IP. Make: Milestone Pro/ Kramer/ Extron |
| 46 | S/I/T/C of HDMI 4x1 Auto Switches any one of four HDMI inputs to one HDMI output, Supports auto switching, Supports video resolution up to 4Kx2K@60Hz 4:4:4 HDR, 18 Gbps high bandwidth, Fully compliant with the HDMI 2.0 and HDCP2.2 specifications.Supports audio return channel (ARC), Advanced EDID management: multiple preset and user defined allowed.,Controllable via RS232 and IR.Supports CEC.Provides seven LEDs to indicate the current operating status and to assist troubleshooting an installation.F irmware upgrade by Micro USB port.. Make: Milestone Pro/Kramer/Extron |
| 47 | S/I/T/C of 4x4 USB 3.2 Matrix USB devices, Input - Input Port- 4 x USB, Connector - 4 x USB-A, USB Standard - USB3.2 Gen1, Output - Output Port - 4 x USB, Connector - 4 x USB-B, USB Standard- USB3.2 Gen1, Port - 1x IR IN, 1 x RS232, 1 x TCP/IP, Connector - 1 x 3.5mm mini jack, 1 x 3-pin terminal blocks, 1 x RJ45, Data transfer rates up to 5Gbps, 5V900mA power supply via USB-A Make Milestone pro/ AMX/ Lightware |
| 48 | S/I/T/C of HDMI over Cat-6 Transmitter Supports HDMI 2.0, up to 4K @60Hz 4:4:4, HDR, 18G, HDCP 2.2 Extends 4K or 1080p HDMI signal up to 230 feet (70m) over a single CAT5e/6 cable. HDMI loop out on transmitter Bi directional IR pass through. Supports video resolution down scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device Features visually lossless compression with no latency EDID pass through. Compact design, easy to install and simple to operate This supports 4K/UHD video @ 60 Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18 Gbps, HDCP 2.2 compliant. IR IN: 3.5mm mini jack to connect IR receiver for IR pass-through.. IR OUT: 3.5mm mini jack to connect IR emitter for IR pass-through DISPLAY: Type-A female HDMI port to connect HDMI display device. SOURCE: Type-A female HDMI port to connect HDMI source device. DC 12V: DC connector for the power adapter connection: Make Milestone Pro/ Kramer/ Extron |
| 49 | S/I/T/C of CAT-6 input and HDMI output Receiver Supports HDMI 2.0, up to 4K @60Hz 4:4:4, HDR, 18G, HDCP 2.2 Extends 4K or 1080p HDMI signal up to 230 feet (70m) over a single CAT 5e /6 cable. HDMI loop out on transmitter Bi directional IR pass through. Supports video resolution down scaling, the 4K input can be automatically degraded to 1080p output on receiver for compatibility with legacy 1080p display device Features visually lossless compression with no latency EDID pass through. Compact design, easy to install and simple to operate This supports 4K/UHD video @ 60 Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18 Gbps, HDCP 2.2 compliant. IR IN: 3.5mm mini jack to connect IR receiver for IR pass-through.. IR OUT: 3.5mm mini jack to connect IR emitter for IR passthrough DISPLAY: Type-A female HDMI port to connect HDMI display device. SOURCE: TypeA female HDMI port to connect HDMI source device. DC 12V: DC connector for the power adapter connection. Make: Milestone Pro/ Kramer/ Extron |
| 50 | S/I/T/C of cable cubby with Tilt up lid fix modules 2 power 230volt compatible with all standard plus 1USB plus 1USB C for charging plus 1USB C plus 1USB pass through for soft codec with 1HDMI 1VGA 1audio 3.5mm for display 1 USB 3.0 for data / 2 LAN passing through holes. Milestone Pro/ Kramer/ Extron / Gigatron |
| 51 | S/I/T/C of DSP 6 Mic/Line Inputs plus 1 Stereo Input. 2 Balanced Outputs plus 1 Stereo Out. Two-Channel USB Audio Interface. 8-Band Feedback Suppressor. Onboard acoustic echo canceller - Make:Audio-Technica/BSS/ Clearone/QSC |
| 52 | S/I/T/C of AI enabled Indoor Dome Camera of 2MP with automatic varifocal lens from 3.5 to 9 mm lens, 2MP@60 FPS with video analytics enabled, 30 meter inbuilt IR with adjustable IR-illumination intensity, 120db dynamic range, Image performance as per IEC 62676-5, 8 Privacy mask, 20 maximum user access simultaneously, Edge based Video Analytics- Line Crossing, Enter/Leave Field, Loitering, Idle/Removed object, counting, Occupancy monitoring, 10 number of analytics can run simultaneously, separate analytics profiles for day/night automatic schedules, built in microphone, two way full duplex audio communication, alarm input/output, support memory card up to 2TB capacity with health monitoring, AES encrypted local storage, support ONVIF S,G,T,M with MQTT event forwarding, RSA4096, SHA256 signature hash, audit logs, syslog, RTSPS encrypted video streaming, certificate based user authentication, UL, CE, FCC, NDAA, MTBF more than 10 years. Approved Makes: Axis, Bosch, Avigilon, Mobotix |
| 53 | SITC of PTZ camera shall support HDMI output up to 4K60P, equipped with a 1/1.8` CMOS sensor (8.42MP, progressive scan), 20X optical zoom, 16X digital zoom, minimum illumination 0.5 Lux, shutter speed 1/30s–1/10000s, multiple white balance modes, backlight compensation, 3D noise reduction, and SNR =55dB. It shall provide pan ±170°, tilt -30°~ plus 90°, adjustable speeds 1.7°–100°/sec, and up to 255 presets with 0.1° accuracy. Supported formats include YUY2, MJPEG, H.264, H.265 up to 2160P30, with image flip/freeze. Interfaces shall include USB2.0, USB3.0, HDMI 2.0, 3G-SDI, RJ45 (10/100/1000M), audio in/out, DC IN 12V, RS485/RS232 supporting VISCA/Pelco protocols. The camera shall be compatible with Windows, Mac OS, Linux, Android (UVC drivers), supporting UVC PTZ control and audio/video protocols (UVC 1.1–1.5). Network features shall include dual stream H.265/H.264/MJPEG compression, resolutions up to 3840×2160, bit rates 32kbps–51200kbps, frame rates 160fps, audio AAC/G711A, and protocols NDI®HX2 (provision should be there), SRT, TCP/IP, HTTP, RTSP, RTMP/RTMPS, Onvif, DHCP, multicast. Power input shall support DC 12V/DC 5V/PoE (802.3af), etc complete requried as per specifications. Make: Panasonic/QSC/Clarilus /Sony |
| 54 | SITC of 86` Interactive Display, Resolution - 3840 x 2160 (4K or Higher), Display Colour - 1.07 Billion or Higher, Brightness - 450 cd/m2, Viewing Angle - ±178° or better viewing angle, Response Time - (= 5 ms, Lifetime - 50,000 hours or more, Audio System, Speakers- 2 x 18 Watts or Higher, Touch Interactive Display, Deployment of Touch Technology - Advanced Infrared, Thickness of the touch glass - 4mm Toughened Glass with 9H Toughness or better, Surface technology - Anti-Glare, Touch accuracy - 1mm or better, Touch Points in Windows - minimum 20 points, Touch Interactive Display - Connectivity Ports Interface- 3 x USB 3.0, 1 x USB 2.0, 1 x Touch Out, 2 x HDMI In, 1 x VGA, 1 x AUDIO In, 1 x RS232, 1 x RJ45IN, 1 x Earphone, 1 x Coax, 1 x HDMI Out, 1 x DP In, 1 x RJ45 Out, 1 x Mic In, Smart System(Android) - CPU- 8 core A55 or better, GPU - Quad core MaliG52 or better, Android version- Android 14.0 or Higher (With Play store), Built-in Software: File manager, Screen mirroring, Chrome, google play store, YouTube, WPS, Welcome Page, Settings, Calculator, User Manual, Float tool, Side tool bar, Note, Vote, Screen recording., Wireless Content sharing, text recognition. 4 Application split screen, screen recording, screen capture, Wireless File sharing form mobile phones.U disk lock screen,USB port Block, Ulti-user management, Built in VC Software -_ Host should be able to invite 100 plus participants for online sessions, the software must have the capability of transmitting up to 4 cameras feeds simultaneously over Video Conference from the host login and The software should support 4K resolution video, chat, data collaboration and digital whiteboard. The software should provide the solution for Local Recording of the Virtual classroom session. Web Application Security Testing Certificate/ Security Test for Vulnerability Assessment and Penetration Testing Certificate for the Video Conferencing Software. Interactive Display and Video conferencing software should be from same OEM, Additional Features - It has scheduling based System with Simply sending a VC Link to users for Joining Call. Voice activated Switching Layout, It can Support 4K Resolution, It should support Participants to join as webinar where webinar users should be able to ask questions through Chat. It should also have direct integration with YouTube to live webcast it to YouTube channel. Client should be able to conduct VC from smart phone and iPad. Client software should be installable in smart phone and ipad.. White Board Feature - Menu bar includes new whiteboard, storage, sharing, closing, and setting functions, Page management, Painting brush-preset 9 mono colors and 2 gradient, Thickness: preset 6 brush sizes, support ordinary brush, marker, pen three brush styles, as well as text recognition brush and graphics recognition brush two intelligent brush, eraser, Table, Timer, Voting, Withdrawal and redo, Single point / multi point, Mini whiteboard: QR code: Scan the QR code in the web link. For to use the mobile terminal to scan the annotation content (picture format). Inbuilt Wi-Fi - Dual WIFI (5G and 2.4G )802.11ac/b/g/n/a, Hotspot or better, Bluetooth - BT5.0 or better, RAM - 4 GB or Higher, ROM - 32 GB or Higher, Certification - BIS (Indian), CE, FCC and ROHS certification. Approved Makes PeopleLink/Sony/Samsung Please Enable Macros to View BoQ information |
