|
| 1 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) area n. exc 1.5 sqm each and removing from the site complete all as specified and directed. |
| 2 | Taking down chowkets or frames (without taking off shutters from the frame) area exc 1.5 sqm but n exc 4.0 sqm each and removing from the site complete all as specified and directed. |
| 3 | Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed. |
| 4 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 100 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 8 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 9 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 10 | S&F 35 mm thick factory made wire guazed and skeleton shutters (2nd class hardwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified fitted to chowkats including preparation of surfaces of shutters and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed. |
| 11 | S&F in repairs 18 mm thick factory made NFC (Natural Fiber Composite) Board for backing of Cup Board and Bathroom/ Kitchen Cabinets etc. of required size having minimum 40% high strength plant derived fibers, consisting of thermoset polymers, non-toxic additives (minimum toxicity index of 12 for 100gms), having denisity of 650Kg/Cum. Modulus of elasticity (3,4), screw withdrawl strength of 1800N (Face) and 900N (Edge), having interlaminar shear strength and thermal stability, all as per specification of the manufacturer and all as specified and directed |
| 12 | S&F Box type factory made Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube 60 mm X 125 mm with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 13 | S&F magnet ball catcher for cupboard shutter complete all as specified and directed. |
| 14 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 15 | S&F in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 16 | S&F 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 17 | S&F in repairs 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 18 | S&F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 19 | S&F in repairs 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 20 | S&F 150 mm long aluminium handle cast type anodised complete all as specified and directed. |
| 21 | S&F in repairs 150 mm long aluminium handle cast type anodised complete all as specified and directed. |
| 22 | S&F 100 mm size Hasp and staple, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 23 | S&F 30 mm flap Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 24 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 25 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 26 | S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed. |
| 27 | S&F GI wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed. |
| 28 | S & Fix in repairs GI wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed. |
| 29 | S&F 300mm size mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 30 | S&F in repair 300mm size mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 31 | S & F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to door at floor level complete all as specified and directed. |
| 32 | S & F in repair for 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to door at floor level complete all as specified and directed. |
| 33 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc. 0.11 sqm and n. exc. 0.16 sqm in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over & including screed bed or bedding layers of 15 mm thick in cement mortar 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 34 | M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering cement screed 7 to 8 mm thick in cement mortar (1:4) finished rough, incl dismantling floor, hearth or wall tiling & cement mortar bedding (but not backing) removing serviceable tiles from site and rubbish off the premises complete all as specified & directed. |
| 35 | M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement in patches complete all as specified and directed. |
| 36 | M&L two coats of oil emulsion distemper over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
