|
| 1 | Removing the black topping of any thickness at road crossing 60cm wide and 200cm deep (clear) including cost of providing sign boards, danger lights, indication arrangements wherever necessary, lead, lift, labour, tools & plants, etc., compete. |
| 2 | Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete. |
| 3 | Supplying and filling with good river sand for foundation including cost of sand, all labour, lead,lift, consolidation etc. complete. |
| 4 | PCC 1:3:6, with 20 to 40mm HBG m/c metal without form work including cost of all materials, cement, all labour, lead, lift, etc. complete. |
| 5 | Providing RCC 1:1.5:3 raft using 20 mm HBG metal with out form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects |
| 6 | Providing RCC 1:1.5:3 using 20 mm HBG metal with form work including cost of all material, lead, lift, etc., complete but excluding cost of all respects |
| 7 | Supplying, fabricating and placing in position of steel reinforcements including cost of steel,binding wire, labour, lead, lift etc complete as per standard specification and as directed by the dept. Engineer at site |
| 8 | Supplying and spreading of well gravel for low lying area including cost of well gravel, labour for consolidation, lead, lift, etc. complete. |
| 9 | Brick work in CM 1:5 using II class bricks of size 9\\" x 4 3/8\\" x 2 3/4 \\" including cost of all material, lead, lift, labour, etc, complete. |
| 10 | Brick work in CM 1:6 using II class bricks of size 9\\" x 4 3/8\\" x 2 3/4 \\" including cost of all material, lead, lift, labour, etc, complete. |
| 11 | Plastering with CM 1:3-12mm thick for wall both interior and exterior faces including cost of all materials lead lift etc complete. |
| 12 | Plastering with cm 1:5 mix using 12mm thick for inside and outside walls, plinth protection including cost of all materials,labour,lead, lift etc complete |
| 13 | Colour washing two coats using white cement mixed with approved colouring pigments, including cost of all materials, labour, lead, lift, etc. complete. |
| 14 | Supplying and fabrication and fixing in position of anodised aluminium natural colour matt finish sliding window of size 1.18*1.48 m in two track in all floors with following sizes. All the two shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section of outer frames as shown below with necessary accessories such as rubber beading , handle,fixing 4mm thick clear sheet glass including all required for fabrication etc. complete. Necessary dimantling making holes in RCC columns , beams, masonry wherever necessary with power drill to the extent required and made good to the original condition after fixing as directed by the dept.Engineer. The Al. surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns. ( All materials should be got approved by the Executive Engineer) before fixing in position. |
| 15 | Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 16 | Dadooing walls with Acid prrof tiles of size 150x150x6mm laid in C.M (1:2 ) 20mm thick and pointing with white cement using 0.40 Kg. Sq.m approved colour and quality as directed by the engineer at site including cost of all materials lead lift labour etc. complete. |
| 17 | Painting 2 coats using white cement over one coat of priming coat for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete. |
| 18 | Painting 2 coats with Asian ACE or equivalent over one priming coat of cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning ,preparing the surface and curing etc.complete. |
| 19 | Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials , lead,lift etc complete. |
| 20 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A F.T. Switch in flush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / Fan point or Electronic Regulator. |
| 21 | Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with t.w. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings with tube |
| 22 | Supplying and fixing of 1400mm sweep ac ceiling fan wit regulator with 300mm down rod on the exisitng clamps of approved make and colour including cost of all materials lead, lift etc., complete. |
| 23 | Supplying and fixing of 450 mm sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall |
| 24 | Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb. |
| 25 | Dismantling of Brick / Stone Masonry in Cmement Mortar walls under 3 m Height |
| 26 | Core Cutting in Concrete Slab 100 mm to 200 mm for pipe rooting for sutiable dia 100 m to 300mm including labour, lead lift etc., |
| 27 | Providing PVC Pipe of Dia 160 mm dia pipe for routing the DC Supply cable including all labour lead lift etc., |
| 28 | Providing PVC Pipe Elbow of Dia 160 mm dia pipe for routing the DC Supply cable including all labour lead lift etc., |
| 29 | Dismantling of PCC by Manual / by Using deploying machineries |
| 30 | Dismantling of RCC by Manual / by Using deploying machineries |
| 31 | GST for bidders outside TamilNadu (IGST) Please Enable Macros to View BoQ information |
