|
| 1 | 100sqmm INST AAAC ON 11MTR joist PL |
| 2 | 11 Mtr long 150x150mm RS Joist pole 34.6Kg/m |
| 3 | 100 sq mm insulated covered unarmoured AA |
| 4 | 11KV - Cross Arm ( MS) 10.2 Kg Each |
| 5 | Back Clamp for v cross Arm (1.7Kg) |
| 6 | 11KV F Clamp 2.9 Kg. each |
| 7 | 11KV Pin insulator polymor |
| 8 | HT stay set complete |
| 9 | HT Stay insulator |
| 10 | HT stay clamp |
| 11 | 7/10 swg GI wire ( for stay ) |
| 12 | 7/10 swg GI wire ( for earthing ) |
| 13 | Earhing of support ( coil type ) |
| 14 | GI Nuts , bolts & washer |
| 15 | GI Barbed wire for aniticliming |
| 16 | Danger plate |
| 17 | concrete materisla for stay anchor plate |
| 18 | Padding and concreating materisla for |
| 19 | 11KV SP cutpoint 9 Mtr long 300KG PSC |
| 20 | 11MTr 150x150 RS joist pole 34.6 KG/M |
| 21 | 75x40x6mm. Channel forStraight Cross-ar |
| 22 | 11KV B&S Disc Insulatorpolymer |
| 23 | 11KV B&S Hardware Fitting |
| 24 | 11KV Pin Insulator polymer |
| 25 | H.T. Stay Set Complete |
| 26 | HT Stay Insulator |
| 27 | Stay clamp |
| 28 | 7/10 SWG Stay Wire |
| 29 | G.I. Nuts, bolt & Washer |
| 30 | Earthing of support (Coil type ) |
| 31 | Concrete materials for stay anchor plate |
| 32 | Padding and concreting materials for sup |
| 33 | 11 KV Metering Unit on PSC/RSJ DP Struct |
| 34 | 11 mtr 150X150 RS Joist Pole 34.6Kg/m |
| 35 | MS Channel 100x50x6mm |
| 36 | MS Channel 75x40x6mm |
| 37 | MS Angle 50x50x6mm |
| 38 | 11 KV Polymer Disc Insulator B&S (70 KN) |
| 39 | 11 KVH/W fitting for Disc (70KN) |
| 40 | Gl Flat 25x6 mm |
| 41 | H.T.Stay set complete |
| 42 | HT Stay Insulator |
| 43 | HT Stay Clamp |
| 44 | 7/10 SWG Staywire |
| 45 | 40mm nominal bore GI pipe (medium gaug |
| 46 | Earthing of support(Coil type) |
| 47 | G.I. .Bolts, Nuts & Washers |
| 48 | Material for masonry work for earth pit |
| 49 | Charcoal, Salt etc. for earthing |
| 50 | GI Barbered wire for Anticlimbing |
| 51 | Danger Plate |
| 52 | 10 Core 2.5mm sq Control Cable for MU in |
| 53 | Fabrication & Galvanisation |
| 54 | Concrete materials for stay anchor plate |
| 55 | Padding and concreting materials for sup |
| 56 | 250 KVA , 11/ 0.4 KV (CU) Plinth mounted |
| 57 | 11 mtr 150X150 RS Joist Pole 34.6Kg/m |
| 58 | 250 KVA, 11/0.4 KV Level-II (as per amnd |
| 59 | MS Channel 100x50x6mm |
| 60 | MS Channel 75x40x6mm |
| 61 | MS Angle 50x50x6mm |
| 62 | 11 KV Polymer Disc Insulator B&S (70 KN) |
| 63 | 11 KVH/W fitting for Disc (70KN) |
| 64 | PG Clamp for 100sqmm AAAC |
| 65 | GI Flat 50x6mm |
| 66 | Gl Flat 25x6 mm |
| 67 | 11KV A/B Switch (400 A,3 pole, Hz type) |
| 68 | 11KV DD Fuse 3pole |
| 69 | DD Fuse Link Unit(20A) |
| 70 | 11KV Lightning Arrestor |
| 71 | Conductor ACSR PVC (61.7 sqmm) |
| 72 | H.T.Stay set complete |
| 73 | HT Stay Insulator |
| 74 | HT Stay Clamp |
| 75 | 7/10 SWG Staywire |
| 76 | 40mm nominal bore GI pipe (medium gaug |
| 77 | Pipe HDPE(25mm) |
| 78 | Pipe GI(100mm) |
| 79 | 1.1KV, 4Cx300 sqmm XLPE Cable |
| 80 | 1Cx300 mm2 LT XLPE Cable (Armoured) |
| 81 | Gland for arm(4Cx300 sqmm XLPE Cable) |
| 82 | LT Distribution Box with MCCB, Aluminium |
| 83 | Al Cable Socket 70mm |
| 84 | Al Cable Socket 95mm |
| 85 | G.I. .Bolts, Nuts & Washers |
| 86 | GI Barbered wire for Anticlimbing |
| 87 | Danger Plate |
| 88 | Fabrication & Galvanisation |
| 89 | Concrete materials for stay anchor plate |
| 90 | Padding and concreting materials for sup |
| 91 | Economic Brick Design fencing |
| 92 | Plinth for transformer |
| 93 | Earthing Pit for Pipe Earthing Please Enable Macros to View BoQ information |
