|
| 1 | Dismantling Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 2 | S & F 6mm thick, asbestos cement, corrugated or semi-corrugated sheets in roofs, etc. fixed with L Hook or cranked bolts including necessary scaffolding all as specified and directed. |
| 3 | M&L for Prepainted galvalume aluminium zinc coating, G.I. based corrugated steel sheet, 0.50 mm thick (total coated thickness) of any colour, having tensile strength of 550 MPA as in roof covering/ wall cladding, fixed with low carbon self tapping screw & EPDM washers all as per manufacturer's instructions etc including dismantling of existing roof covering complete all as specified and directed. |
| 4 | M&L for Prepainted galvalume aluminium zinc coating, G.I. based plain steel sheet, 0.50 mm thick (total coated thickness) of any colour, having tensile strength of 550 MPA as in Ridge/Valley/Gutter fixed with low carbon self tapping screw & EPDM washers all as per manufacturer's instructions etc including dismantling of existing roof covering as specified and directed bcomplete all as specified and directed. |
| 5 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc.under 40 sq. cm in section, in any position complete all specified. |
| 6 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc.40 sq. cm and over in section, in any position |
| 7 | S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 inluding one coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-S complete all as specified and directed. |
| 8 | M&L in repairs 4 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling and making good disturbed surface complete all as specified and directed . |
| 9 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed |
| 10 | Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed |
| 11 | Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed |
| 12 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed. |
| 13 | S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing. |
| 14 | S&F for 105mm x 60 mm x 1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as spd and directed. |
| 15 | S&F for 125mm x 60mm x 1.25 mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 16 | S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge |
| 17 | S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 18 | S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats |
| 19 | S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm. |
| 20 | S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed. |
| 21 | S&F aluminum anosided handle 150mm long of extruded section and fixed. |
| 22 | M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws |
| 23 | S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed. |
| 24 | M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete . |
| 25 | S&F in repairs 140 mm double legged door stopper of aluminium alloy with rubber complete all as specified and directed |
| 26 | S&F Mortie lock, verticle type size 100 mm mild steel |
| 27 | Repair of flush or skelton doors with aluminum /wooden/PVC sheet including taking down the door and fitted in same opening |
| 28 | S&F in repairs 150mm helical door spring complete all as spd and directed Please Enable Macros to View BoQ information |
| 29 | S&F in repairs 150mm helical door spring complete all as spd and directed Please Enable Macros to View BoQ information |
