|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified and as directed. |
| 2 | Taking down cement plaster on brick walls etc including Rcking out joints hacking to key scrubbing down with water etc up to 4 th story, complete all as directed by Engr-in-Charge |
| 3 | M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 (externally) finished even and fair without using extra cement including water proofing compound, complete all as specified and as directed. (Water proofing compound should be paid seperately) . |
| 4 | \\"Supply only\\" of integral water proofing compound, complete all as specified and as directed. |
| 5 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, , complete all as specified and as directed. |
| 6 | M&L for rendering 15 mm thick in CM 1:6 on concrete surfaces finished surface even and smooth without using extra cement, complete all as specified and as directed. |
| 7 | M&L for prepration of newly plastered surfaces of walls including cornices pilasters etc and applying two coat of oil Emulsion Distemper (OBD) over a coat of priming surface, complete all as specified and as directed. |
| 8 | M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces, complete all as specified and as directed. |
| 9 | M&L for preparation of newly plastered surface of ceiling including cornices pilasters etc.and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 10 | M&L Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces),washing rubbing down and stopping of distempered and painted surface and applying one coat of oil Emulsion Distemper (OBD) , complete all as specified and as directed. |
| 11 | M&L for Complete removal of existing surfaces of wall and applying two coat of oil Emulsion Distemper (OBD) over a coat of birla white wall care putty, complete all as specified and as directed. |
| 12 | M&L for preparation of old decorated plastered surface of ceiling including cornices pilasters etc.and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 13 | M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying one coat of cement base paint, complete all as specified and as directed. |
| 14 | M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying Two coat of cement base paint, complete all as specified and as directed. |
| 15 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint of (white or tinted) , complete all as specified and as directed. |
| 16 | M&L for preparation of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 17 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base etc.; concrete surfaces finished fair and even and prepared to receive floor finish, complete all as specified and as directed. |
| 18 | M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring in patches n. exc. 3 Sqm in each patch finished even and smooth (without using extra cement), complete all as specified and as directed. |
| 19 | M&L Glass dividing strips, 3 mm thick and 38 mm wide inserted in position, conform to design, complete all as specified and as directed. |
| 20 | M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement, complete all as specified and as directed. |
| 21 | M&L Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound, complete all as specified and as directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land , complete all as directed. |
| 23 | M&L for Virified Ceramic tiles (premium quality) 7/8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile,including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 24 | M&L for Virified Ceramic tiles (premium quality) 7/8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile,including tile laid over and including screed plaster 10 mm thick in CM (1:4), complete all as specified and as directed. |
| 25 | M&L for non skid ceramic tiles/ non skid tiles (premium quality) coloured 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile,including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 26 | M&L for Non skid ceramic coloured tiles (premium quality) 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed.. |
| 27 | M&L for Non skid ceramic coloured 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4), complete all as specified and as directed. |
| 28 | M&L for glazed ceramic coloured tiles of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles, complete all as specified and as directed. |
| 29 | M&L for 20 mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 30 | M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:4, complete all as specified and as directed. |
| 31 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and as directed. |
| 32 | M&L for flush pointing to brick roof tiles in cement mortar 1:3 in including racking out joints , complete all as specified and as directed. |
| 33 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n. exc 1.5 Sqm, , complete all as specified and as directed. |
| 34 | Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 sqm each and removal to store complete all as specified |
| 35 | Taking down shutters of n.exc 1.00 sqm each,, complete all as specified and as directed. |
| 36 | Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each,, complete all as specified and as directed. |
| 37 | Taking down shutters area exc. 1 sqm but n. exc. 2 sqm and refixing in the same opening after easing and adjusting and making the door closing properly including refixing builder's hardware, complete all as specified and as directed. |
| 38 | Easening of door exc 1sqm but not exc 2 sqm each by making ajdustment to hinges planning the sides of doors without taking down of door and refixing if required, complete all as specified and as directed. |
| 39 | Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required, complete all as specified and as directed. |
| 40 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as directed. |
| 41 | M&L for for mild steel work as in door frame chowkhat/ cooler stand etc including necessary cutting drilling and welding etc, complete all as specified and as directed. |
| 42 | S&F 35 MM thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified. |
| 43 | S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I, complete all as specified and as directed. |
| 44 | S&F steel window/ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handles & flat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 & CEJZ/TD-1019/08 sheet 1/3 to 3/3, complete all as specified and as directed.Note : The above rate for glazed and gauged shutter window/ventilator and measured one time clear opening for payment of window |
| 45 | M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 46 | M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 47 | S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified, shown on drawing and as directed. |
| 48 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified. |
| 49 | S&F 100mm size MS butt hinges medium weight cold rolled (zinc cromate).,, complete all as specified and as directed. |
| 50 | Ditto all as peritem No. 49 above but in repairs, complete all as specified and as directed. |
| 51 | S&F 100 mm butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed. |
| 52 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long,, complete all as specified and as directed. |
| 53 | Ditto all as peritem No.52 above but in repairs, complete all as specified and as directed. |
| 54 | S&F Extruded aluminium alloy handles, fabricated type,anodised 125 mm in size,, complete all as specified and as directed. |
| 55 | Ditto all as peritem No.54 above but in repairs, complete all as specified and as directed. |
| 56 | S&F MS pressed handles, oval type, stove enameled black 150mm size, complete all as specified and as directed. |
| 57 | Ditto all as per item No.56 above but in repairs, complete all as specified and as directed. |
| 58 | M&L for mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed. |
| 59 | Ditto all as per item No.58 above but in repairs, complete all as specified and as directed. |
| 60 | S&F MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed, complete all as specified and as directed. |
| 61 | Ditto all as per item No.60 above but in repairs, complete all as specified and as directed. |
| 62 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate , complete all as specified and as directed. |
| 63 | Ditto all as per item No.62 above but in repairs, complete all as specified and as directed. |
| 64 | S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm, complete all as specified and as directed. |
| 65 | Ditto all as per item No.64 above but in repairs, complete all as specified and as directed. |
| 66 | S&F in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open, complete all as specified and as directed. |
| 67 | S&F for 100 mm size Hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 68 | Ditto all as per item No.67 above but in repairs, complete all as specified and as directed. |
| 69 | M&L for petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys, complete all as specified and as directed. |
| 70 | S&F peg set of 06 Nos mild steel chromium plated 45 cm long fixed with Mild steel screws fixed in repair, complete all as specified and as directed. |
| 71 | Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable, complete all as specified and as directed. |
| 72 | M&L for welding in repairs not exceeding 2.5cm in length & thickness of metal to be welded n. exc. 6mm, complete all as specified and as directed. |
| 73 | M&L for welding in repairs exc. 2.5cm but n. exc. 5cm in length & thickness of metal to be welded not exceeding 6mm complete all as specified including Material and labour, complete all as specified and as directed. |
| 74 | M&L in repairs 25mm dia mild steel pipe curtain rod with powder coated including fancy type brackets and finales fixed on both ends,, complete all as specified and as directed. |
| 75 | M&L in repair 20mm dia curtain rails, mild steel, chromium plated fixing in cup board with brackets, stops, rollers etc, complete all as specified and as directed. |
| 76 | S&F in repair 9 mm plywood, grade BWR type BB ( No. of ply 5) fixed with screw to timber frame or shutter any thickness, complete all as specified and as directed. |
| 77 | S&F in repair 12 mm plywood, grade BWR type BB ( No. of ply 7) fixed with screw to timber frame or shutter any thickness, complete all as specified and as directed. |
| 78 | S&F in repair anti dusting rubber beeding for door shutter for anti snakes, dusting etc, complete all as specified and as directed. |
| 79 | S&F in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination complete including dismantling all as specified and directed. |
| 80 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads, complete all as specified and as directed. |
| 81 | supply and fix sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame, complete all as specified and as directed. |
| 82 | S&F Figured Glass 3.0 mm thick, Pin Head type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed. |
| 83 | M&L for for securing glass of any description in existing wooden/ steel frames glazed with putty/ bends including removing loose or decayed putty/ beads, painting/ oiling one coat on rebates, grooves, reputting and painting/ oiling to match existing work (new length of frames reputtied shall be measured) , complete all as specified and as directed. |
| 84 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples,, complete all as specified and as directed. |
| 85 | Ditto all as per item No. 84 above but in repairs, complete all as specified and as directed. |
| 86 | Taking down aluminium door shutter including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter, complete all as specified and as directed. |
| 87 | S&F for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 88 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 89 | M&L for Mortice lock, vertical type, size 100mm 4 lever Brass body,, complete all as specified and as directed. |
| 90 | S&F 3 mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter, complete all as specified and as directed. |
| 91 | S&F 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,, complete all as specified and as directed. |
| 92 | S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed. |
| 93 | S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, Complete all as specifed and directed. |
| 94 | Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines, complete all as specified and as directed. |
| 95 | Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply, complete all as specified and as directed. by Engineer in charge |
| 96 | Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge |
| 97 | S&F in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE : JAGUAR or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 98 | S&F in repair Centre Hole Basin Mixer with popup waste with 450mm long Braided Hoses of MAKE : JAGUAR or equivalent model of HINDWARE/MARK(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 99 | S&F in repair, bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket, complete all as specified and as directed. |
| 100 | S&F in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and as directed. |
| 101 | S&F in repair angle cock/stop valves 15 mm nominal bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type,chromium plated, , complete all as specified and as directed. . |
| 102 | S&F 15 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms), complete all as specified and as directed. |
| 103 | S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.), complete all as specified and as directed. |
| 104 | S&F 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, complete all as specified and as directed. |
| 105 | S&F 15mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified |
| 106 | S&F 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified |
| 107 | S&F for fortune PVC Rubberized Water Leakage Seal Tape, Silicon Sealant Tape, Waterproof Flex Tape for Seal Leakage Super Strong Adhesive Tape for Water Tank Sink Sealant for Gaps Flex Tape complete all as specified |
| 108 | S&F in repairs PVC internal fittings for low level flushing cistern including syphon kit, complete all as specified and as directed. |
| 109 | S&F in repairs PVC connection 15 mm size , 45 cm long with PTMT adopter,check nuts and washer on both sides, complete all as specified and as directed. |
| 110 | S&F in repair brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type) complete all as specified. |
| 111 | S&F in repair brass chromium plated health faucet with flexible tube of suitable length fixed on water closet (English type) complete all as specified. |
| 112 | S&F in repair 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and directed. |
| 113 | S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair,, complete all as specified and as directed. |
| 114 | S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 115 | S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws, complete all as specified and as directed. |
| 116 | S&F in repairs bevelled edge looking mirror of selected quality glass, 5.5 mm thick of size 450 x 600 mm, PVC moulded case mounting on 6 mm thick AC building board or commercial ply wood on back and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs,, complete all as specified and as directed. |
| 117 | S&F for 32 mm bore size waste coupling for steel sink/WHB/urinal etc with PVC cap complete fixed in repairs, complete all as specified and as directed. |
| 118 | S&F in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same, complete all as specified and as directed. |
| 119 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 125mm wide with chromium plated bracket guards and railing 60cm long , complete all as specified and as directed. |
| 120 | S&F in repair glass corner shelf (with bracket) (as approved), complete all as specified and as directed. |
| 121 | S& F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 122 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and as directed. |
| 123 | S&F in repair of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe, complete all as specified and as directed. |
| 124 | S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm, complete all as specified and as directed. |
| 125 | S&F in repair stainless steel kitchen rack of size 31\\" x 36\\" x 10\\" and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 126 | S&F in repairs plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device, complete all as specified and as directed. |
| 127 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified. |
| 128 | S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets, complete all as specified and as directed. |
| 129 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete , complete all as specified and as directed. |
| 130 | S&F in repair of any dia PVC waste pipe for WHB/sink/urinal, complete all as specified and as directed. |
| 131 | S&F in repair for Low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sq cm, complete all as specified and as directed. |
| 132 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bendetc., complete all as specified and as directed. . |
| 133 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified. |
| 134 | Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified. |
| 135 | S&F galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors,, complete all as specified and as directed. |
| 136 | S&F re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor, complete all as specified and as directed. |
| 137 | S&F galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors,, complete all as specified and as directed. |
| 138 | S&F re-fixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor, complete all as specified and as directed. |
| 139 | Disconnecting float valve with float arm from PVC service water tank of any capacity,empting stored water through wash outlet,cleaning and removing all scale and dirt ,etc from tank and from mouths of circulating pipes ,etc and finally washing the internal surfaces with bleaching powder,closing wash outlet ,refixing float valve in proper position,closing the top cover including minor repair if required and testing complete including writing in stencils \\"cleaned on:_______(Dae)\\" 3\\" height on outer face of tank with white paint of capacity of any , complete all as specified and as directed. |
| 140 | S&F 500 ltr UV protected Anti microbial rotational moulded polythene water storage tank triple layer white color cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, complete all as specified and as directed. |
| 141 | S&F 1000 ltr UV protected Anti microbial rotational moulded polythene water storage tank cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, , complete all as specified and as directed. |
| 142 | S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms), complete all as specified and as directed. |
| 143 | S&F in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union etc suitable for 15mm bore pipe, complete all as directed. by the Engr-in-Charge. |
| 144 | S&F in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union suitable for 20mm bore pipe, complete all as directed. by the Engr-in-Charge. |
| 145 | Supply and fixed in repair brass spindle for pillar cock, stop cock (Concealed), angle cock, bib cock & wall mixer cock for 15mm complete all as specified |
| 146 | S&F in repairs water tank cover of any capacity and description, complete all as specified. |
| 147 | Cleaning blockage in rain water pipe by removing the CP grating and rodding etc & removing & cleaning and refixing old CI grating in position in cement mortar 1:6 , complete all as specified and as directed. |
| 148 | Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store. |
| 149 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm,, complete all as specified and as directed. |
| 150 | Ditto all as per item No 149 above, but 75mm, complete all as specified and as directed. |
| 151 | S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 152 | S&F 110 mm PVC (SWR) branch pieces (Tee) with cement joint, complete all as specified and as directed. |
| 153 | Ditto all as per item No 151 above, but 75mm , complete all as specified and as directed. |
| 154 | S&F 110mm bore PVC(SWR) bend/shoe of any radius, with cement joint, complete all as specified and as directed. |
| 155 | Ditto all as peritem No 154 above, but 75mm, complete all as specified and as directed. |
| 156 | S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and as directed. |
| 157 | M & L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as directed by the Engineer-in-Charge. |
| 158 | M&L for for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required, complete all as specified and as directed. |
| 159 | M&L for for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same, complete all as specified and as directed. |
| 160 | Cleaning of roof removing bushes, mud, debris, digging out roots and making good the disturbed portion of roof tiles with pointing in CM (1:3) including matching the same, complete all as specified and as directed. Please Enable Macros to View BoQ information |
