|
| 1 | Supplying , installation and commissioning of 1 HP capacity self priming monoblock pumpset high head (Kirlosker or equivalent make) with necessary accessories etc complete as per direction of engineer-in-charge. |
| 2 | Supply and installation of 25 cum sand filter etc complete as per direction of engineer-in-charge. |
| 3 | Supply and installation of 12 cum screen filter etc complete as per direction of engineer-in-charge. |
| 4 | Supply and installation of venturi injector with necessary tee, elbow and valve to main line etc complete as per direction of engineer-in-charge. |
| 5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 6 | 25 mm nominal dia Pipes |
| 7 | 40 mm nominal dia Pipes |
| 8 | Supply and installation of 32 mm HDPE pipe with all fittings and accessories |
| 9 | Supply and installation of 16 mm LDPE lateral pipe with all fittings and accessories for fixing to main line |
| 10 | Supply and installation of 5 LPH dripper with necessary accesories etc complete as per direction of engineer-in- charge. |
| 11 | Supply and installation of flush valve with necessary fitting to main line 32mm |
| 12 | Supply and fixing end cap to 16mm Lateral HDPE line |
| 13 | Providing and fixing CPVC ball valve approved quality. |
| 14 | 25 mm nominal bore |
| 15 | 40 mm nominal bore |
| 16 | Supply and installation of 16mm valve with all fittings and necessary accesories for fixing to lateral pipe |
| 17 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 18 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 19 | All kinds of soil |
| 20 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 21 | All kinds of soil. |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 23 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 24 | 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 25 | 1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 27 | Foundations, footings, bases of columns, etc. for mass concrete |
| 28 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 29 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 30 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 31 | On steel work |
| 32 | Steel work in built up G.I pipe tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 33 | Electric resistance or induction butt welded tubes. (G.I pipes). |
| 34 | Supplying and fixing 100 GSM wooven fabric weedmat black in colour. As per direction of engineer-in-charge. |
| 35 | Supply and fixing of UV treated 80 GSM 75 % green shade net all over the structure including all labour charges etc complete etc complete as per direction of engineer-in-charge. |
| 36 | Supply and installation of 4 Way Fogger Assembly unit with check valve etc, complete as per direction of Engineer in charge. |
| 37 | Supplying and fixing of 6A/16A, Capton 5-in-1, 2 Fixing hole Combined Unit (Make:Anchor, Model:Penta or equivalent) including connection etc. as required. |
| 38 | Supplying and fixing of 16 A , 3 pin Plug Top including connection etc. as required. |
| 39 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 40 | 20 mm |
| 41 | Supplying and laying of following size PVC insulated and PVC round sheathed muticore annealed bare copper conductor (flexible) industrial cable of 1.1 KV grade Conforming to IS 694:2010 |
| 42 | 1.5 sq.mm. x 3 core |
| 43 | Supplying and laying of PVC insulated 6 Sq mm. x 2 core service cable with aluminium conductor. Please Enable Macros to View BoQ information |
