|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) |
| 3 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (DSR 9.83) |
| 4 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 5 | 250x16 mm (DSR 9.96.2) |
| 6 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 7 | 200x10 mm (DSR 9.97.3) |
| 8 | 150x10 mm (DSR 9.97.4) |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 10 | 125mm (DSR 9.100.1) |
| 11 | Providing and fixing aluminium hanging floor door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 12 | Twin rubber stopper (DSR 9.101.2) |
| 13 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily : Double charge vitrified tile polished finish of size : |
| 14 | Size of Tile 600x600 mm (DSR 11.41A.1.1) |
| 15 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 16 | In 75x75 mm deep chase (DSR 12.21.1) |
| 17 | 12 mm cement plaster |
| 18 | 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) |
| 19 | Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): |
| 20 | Flush/ Ruled/ Struck or weathered pointing (DSR 13.32.1) |
| 21 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 22 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.5.1) |
| 23 | Dismantling of Door and windows and clerestory windows ( steel & wood ) shuttter including chowkhats, architrave, hold fasts etc complete & staking within 50m lead. |
| 24 | Area 3 sqm or below (DSR 15.2.1) |
| 25 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 15.56) |
| 26 | Disposal of building rubbish /malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(DSR 15.60) |
| 27 | Grading roof for water proofing treatment with |
| 28 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (DSR 22.14.1) |
| 29 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. up to the height of 15m with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness. (NS) |
| 30 | Dashing Cement Concrete 1:11/2 :3 in R.C.C. beams, Stairs, Facias etc. of average thickness 1\\" excluding steel reinforcement, centering and shuttering but including curing of the concrete complete in all respect and to entire statisfaction of the Engineer-in-charge. (NS) |
| 31 | Removing rust from exposed reinforcement bars upto 15m height in RCC walls, columns, beams, shelves etc to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles afer 24hrs of its application with wire brush and thouroughly washing witgh water and allowing it to dry all complete as per directions of engineer in charge. (NS) |
| 32 | Providing and Fixing chicken mesh of size ½\\"x½\\" and 26 gauge up to 15m height on RCC beams, facias, brick work etc. wherever required with wooden gutties, nails and screws including drilling holes etc complete as per directions of the Engineer-in-charge. (NS) |
| 33 | Providing and laying water proofing treatment in roof slabs etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (B) Laying of Fibre glass cloth with a coat of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/ sqm when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (C) Third layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (Based on 22.5) (NS) |
| 34 | P/F 110mm internal dia PVC pipe as rain water pipe on walls of 6 kg. pressure with Bend, Elbow and Clamps complete in all respect to the entire satisfaction of Engineer--in-Charge. (NS) |
| 35 | Providing and fixing of cupboard shutter consisting of 19mm thick commercial board with lipping all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with Alum. handle (with base plate) and magnetic catcher. The board surface is to be painted with two coats of special quality synthetic enamel paint after primer coat and preparation of surface, complete frame is to be fixed with iron nails etc. complete in all respects and to the entire satisfaction ofthe Engineer in charge. (NS) |
| 36 | Providing and fixing of cupboard shelves consisting of 19mm thick commercial board (ISI marked) phenol bonded fixed with hard wood battens and gutties including the cost of necessary lipping screws nails fevicol and two coats of special quality paint over one coat of primer after preparation of surface complete in all respect and to the entire satisfaction of the Engineer in charge. (NS) |
| 37 | Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of aluminium hinges 4'', SS handles 5'', Aluminium Tower bolts 8'' & 6''all necessary Alumn fitting and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. (NS) |
| 38 | Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2\\" x 2 1/4\\"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, refixing of existing grills/ doors, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge. (NS) Please Enable Macros to View BoQ information |
