|
| 1 | DSR Item No. 1.10Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 2 | Group B |
| 3 | DSR Item No. 1.15Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required. |
| 4 | Group B. |
| 5 | DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 6 | 3 x 1.5 sq. mm |
| 7 | 3 x 2.5 sq. mm |
| 8 | DSR Item No.1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 9 | DSR item No.1.25Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 10 | DSR item No.1.24Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 11 | 5/6 amps switch |
| 12 | 2 way 5/6 A. switch |
| 13 | 3 Pin 5/6 A. socket outlet |
| 14 | 15/16 amps switch |
| 15 | 6 pin 15/16 amps socket |
| 16 | DSR item No.1.23Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 17 | 5/6 amps switch |
| 18 | 2 way 5/6 A. switch |
| 19 | 3 Pin 5/6 A. socket outlet |
| 20 | 15/16 amps switch |
| 21 | 6 Pin 15/16 A. socket outlet |
| 22 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 23 | Single pole |
| 24 | Triple pole and neutral |
| 25 | Double pole |
| 26 | DSR ITEM NO. LED 8.9.5Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, (As per Complete Item No. 9 of the DNIT). |
| 27 | 18-22 watt |
| 28 | DSR Item No. 8.16.3LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%,(As per Complete Item No. 10 of the DNIT). |
| 29 | 50 Watt |
| 30 | 100 Watt |
| 31 | Supply & erection of Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 of pull cord switches, one for oscillation and one for speed regulation. (As per Complete Item No. 11 of the DNIT). |
| 32 | Supply and Erection of Gate Light fitting with clear / frosted globe duly wired with B-22 d / E-27 lamp holder complete with LED lamp of 9 Watt. to be fixed on existing gate pillar by providing suitable arrangement. (As per Complete Item No. 12 of the DNIT). |
| 33 | S/E of LED Bulk Head Luminaries weather proof frosted light with PMMA / PC reflector and silicon gasket to be installed on surface. The LED fitting should have minimum system Lumen output minimum 1000 Lumen and the driver of the fitting should be workable on 140-260 Volt. (As per Complete Item No. 13 of the DNIT). |
| 34 | Supply & Laying of PVC insulated sheathed aluminium conductor un armored cable 10 mm. sq. 2 core flat with 8 SWG G.I. earth wire on existing surface with suitable clamps / hanger etc. including making connection and petty material etc. as required. |
| 35 | Supply and erection of 5/7/9 Watt. LED lamp suitable for existing fitting. The LED lamp should be of Philips / Havells / Bajaj / Wipro / Twinkle make only. The job includes the cost of all other petty material etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The color and wattage of lamp should be as selected by the occupant. |
| 36 | S/E of LED 8W/ 9 W. bollard fitting. The bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. The bollard should be made out of extruded aluminium profile and die cast aluminium base with PMMA/ Opal diffuser bollard painted with superior quality of paint. (As per Complete Item No. 16 of the DNIT). |
| 37 | Supply & erection of PVC Gang Box of anchor Panta make or its equivalent make Gold medal/ Havells only, including carriage, erection with suitable size of nuts/ bolts and other petty material etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. |
| 38 | 1 Module |
| 39 | 3 Module |
| 40 | 4 Module |
| 41 | 6 Module |
| 42 | S/E of PVC Batton of following sizes. The Batton should be fixed on the wall with help of PVC rawl plug etc. to the entire satisfaction of EIC. |
| 43 | Size 1” |
| 44 | Size ¾” |
| 45 | Supply and erection of fancy/ decorative lights of following types / specifications including making connection, testing and commissioning etc. as selected by occupant of house. The job includes cost of LED lamps, suitable rating copper wire for making connection with existing light point and all petty material are required to complete the job to the entire satisfaction of Engineer-in-charge. The color and wattage of the lamp shall be as per the requirement of occupant of the house. The LED lamp should be make Philips/ Wipro/ Havells/ Bajaj only. |
| 46 | Spike light |
| 47 | Mirror Light (Brass Finish) |
| 48 | Single Arm Wall light (Brass Finish with glass shade lamp) |
| 49 | Up Down light |
| 50 | DSR ITEM NO. 9.2Brush Less Direct Current (BLDC) MotorSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, (As per Complete Item No. 20 of the DNIT). |
| 51 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 52 | 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 53 | Supply & erection of fresh air fan high speed motor with copper wound 10” sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of Havells make Ventiliar DX White / Orient make Ventilator / Crompton make Brisk Air/ Bajaj make 70049 250mm sweep only. (As per Complete Item No. 21 of the DNIT). |
| 54 | Supply & erection of fresh air fan high speed motor with copper wound 8” sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of Havells make Ventiliar DX White / Orient make Ventilator / Crompton make Brisk Air/ Bajaj make 70049 250mm sweep only. (As per Complete Item No. 22 of the DNIT). |
| 55 | Supply and Erection of electronic step type socket type fan regulator in existing B.L. Sheet including making connection and petty material reqd. to complete the job. The fan regulator should be of Anchor Panta / Havells Reo/ Gold Medal Essenza make only |
| 56 | Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The make should be Super Hylam / Formica / GreenLam only. |
| 57 | Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (As per Complete Item No. 25 of the DNIT). |
| 58 | Size 12” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme DLX/ Usha make Turbo HDEF only. |
| 59 | DSR Item No. 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 60 | DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required |
| 61 | 125 A,36KA,FPMCCB |
| 62 | 200 A,36KA,FPMCCB |
| 63 | Supply & erection of sheet metal distribution board of suitable size of required number of ways for mounting Miniature Circuit Breaker/ Isolators including connection & bonding to the existing earth etc. as required to the entire satisfaction of EIC. |
| 64 | Sheet metal SP&N Distribution board (dust protected) provided with din bar suitable for incorporating MCB’s/Isolator 3 way / 4 way Please Enable Macros to View BoQ information |
